betaFeedback

WorksPhysics and Astronomy

Room-temperature bipolar valleytronic transistor in MoS2/WSe2 heterostructures

Abstract

Valley degree of freedom in the 2D semiconductor is a promising platform for the next generation optoelectronics. Electrons in different valleys can have opposite Berry curvature, leading to the valley Hall effect (VHE). However, VHE without the plasmonic structure's assistance has only been reported in cryogenic temperature, limiting its practical application. Here, we report the observation of VHE at room temperature in the MoS2/WSe2 heterostructures. We also uncover that both the magnitude and the polarity of the VHE in the 2D heterostructure is gate tunable. We attribute this to the opposite VHE contribution from the electron and hole in different layers. These results indicate the bipolar transport nature of our valleytronic transistor. Utilizing this gate tunability, we demonstrate a bipolar valleytronic transistor. Our results can be used to improve the ON/OFF ratio of the valleytronic transistor and to realize more versatile valleytronics logic circuits.

attribute this to the opposite VHE contribution from the electron and hole in different layers. These results indicate the bipolar transport nature of our valleytronic transistor. Utilizing this gate tunability, we demonstrate a bipolar valleytronic transistor. Our results can be used to improve the ON/OFF ratio of the valleytronic transistor and to realize more versatile valleytronics logic circuits.

Main

Valley (i.e., the carrier energy band local minima in the momentum space) offers an additional degree of freedom, which can be utilized in novel optoelectronic devices[1, 2, 3, 8, 9]. In the monolayer transition metal dichalcogenide (TMD) MX2\mathrm{MX}_{2} (M=Mo, W\mathrm{M}=\mathrm{Mo},\ \mathrm{W} and X=S, Se\mathrm{X}=\mathrm{S},\ \mathrm{Se}), the K\mathrm{K} and K′\mathrm{K}' valley electrons (holes) have an opposite out-of-plane Berry curvatures[1, 2, 3]. This causes the intrinsic valley Hall effect (VHE), where the anomalous velocity (i.e., the in-plane velocity component perpendicular to the in-plane electric field) in one valley is opposite to the one in the other valley, resulting in a detectable Hall voltage[1, 7, 10]. Moreover, due to the opposite valley magnetic moment in the K\mathrm{K} and K′\mathrm{K}' valley, these two valleys are optically addressable using circularly polarized light[3, 11, 12, 13, 14, 15, 16]. While VHE has been demonstrated previously, these experiments require either cryogenic temperature[4, 5, 17, 18] or plasmonic structures[9]. These limit the practical application of VHE. Moreover, like in a conventional transistor, it is important to optimize the ON/OFF ratio in a valleytronic transistor[9].

Here, we report the experimental demonstration of the VHE in MoS2/WSe2\mathrm{MoS}_{2}/\mathrm{WSe}_{2} van der Waals heterostructure at room temperature. In contrast with the MoS2\mathrm{MoS}_{2} valleytronic transistor case, where only the VHE magnitude is gate tunable[4, 9], both the magnitude and the polarity of the VHE in our valleytronic transistor are gate tunable. We attribute this full gate tunability to the opposite VHE contribution from the electron and hole in different layers, which shows the bipolar transport characteristic of our device. Such full gate tunability can be used to improve the ON/OFF ratio of the valleytronic transistor beyond the current limit and to realize more compact valleytronics logic circuits.

VHE at room temperature

The VHE in the 2D MoS2_2/WSe2_2 is illustrated in Figure 1a. The in-plane electric field E⃗\vec{E} induces opposite anomalous velocity for the carrier in KK and K′K' valley[3, 4]. Under circularly polarized light with energy close to WSe2_2 exciton energy, the WSe2_2 KK (K′K') valley electron and valley hole can be reliably excited[15]. Due to the MoS2_2/WSe2_2 type-II band alignment[19] [20, 21], the holes will stay in the WSe2_2 layer while electrons undergo charge transfer to the MoS2_2 layer22,23. This electron-hole layer separation suppresses the intervalley scattering24–26 and reduces the exciton binding energy27,28; both are beneficial for realizing VHE at a higher temperature. Due to the weak interlayer band hybridization in KK and K′K' valleys28,29, the two layers can be treated as having two independent Berry curvatures in these valleys. Moreover, due to the electron-hole layer separation, the electron and hole can have independent transport mechanisms. The ability to control the layer asymmetry and carrier transport by electrical gating can result in a gate tunable VHE polarity[5].

VHE at room temperature in a MoS₂/WSe₂ heterostructure, optical and back-reflection images, Hall measurement setup, and Hall voltage measurements

Figure 1. VHE at room temperature. (a) Illustration of VHE in MoS2_2/WSe2_2 heterostructure. In-plane electric field E⃗\vec{E} and the carrier layer separation induced valley and layer-dependent anomalous velocity. (b) Optical image of the MoS2_2/WSe2_2 sample. The electrode numbering is for easy referencing. (c) Hall measurement experimental setup. The input resistance of the differential preamplifier (A-M Systems, Inc. Model 3000) is 1000 TΩ\Omega, much greater than the sample resistance. (d) Back-reflection image of the sample. The red dot is the excitation location for gate dependence measurement. (e) Observation of VHE at room temperature. The black, red, and blue symbols are the measured difference between the Hall voltage under the right and left circular polarization (R-L), under the left and right circular polarization (L-R), and under the horizontal and vertical polarization (H-V), respectively. The lines are linear fitting.

Figure 1b shows the optical image of the MoS2_2/WSe2_2 heterostructure (Sample 1). The heterobilayer has an AA-stacking alignment, determined through second harmonic generation measurement (see Figure S1 and Supplementary Note I in the Supplementary Information). The Hall bar structure is fabricated by e-beam lithography followed by thermal evaporation and lift-off process. The sample has a back-gate electrode for studying the gate dependence of VHE. The experimental setup for the Hall voltage measurement is shown in Figure 1c. A set of Galvo mirrors is used to scan the laser beam across the sample for optical excitation under normal incidence. The light polarization is modulated between left and right circularly polarized light with a combination of a polarizer and a liquid crystal retarder (LCR) driven by a function generator. A bias voltage VxV_x (electrode 5 and 3) and back-gate voltage VgV_g can be applied to the sample. The Hall voltage is detected in the direction perpendicular to VxV_x (electrode 1 and 4). It is amplified firstly with a differential preamplifier and then with a lock-in amplifier (locked to the function generator frequency) to filter out the background noise, resulted in VHV_H (i.e., the difference between the Hall voltage under two orthogonal polarization).

SHG measurement of MoS$_2$/WSe$_2$ samples

Figure S1. SHG measurement of MoS2_2/WSe2_2 samples. (a) Sample 1. The SHG measurement results for the monolayer MoS2_2 region and heterostructure region are shown by the black and red symbols, respectively. (b) Sample 2. The SHG measurement results for the monolayer WSe2_2 region, monolayer MoS2_2 region, and heterostructure region are shown by the black, blue, and red symbols, respectively. In both Sample 1 and Sample 2, the heterostructure's SHG signal is stronger than those from the monolayers, indicating AA-stacking alignment.

With the laser focusing on the sample, we first collect the back-reflected light while scanning the sample, resulting in the image shown in Figure 1d. Based on the reflection scanning result, the beam size can be estimated to be in the sub-micrometer range, close to the diffraction limit. Next, we do the optically excited Hall measurement. The excitation wavelength is 726 nm, on resonance with the intralayer WSe2\mathrm{WSe}_2 neutral exciton transition (see Figure S2 in the Supplementary Information for the photoluminescence (PL) spectrum). The observation of VHE at room temperature is shown in Figure 1e. As can be seen, VHV_H shows a linear dependence on VxV_x for circular polarization modulation (R-L and L-R in Figure 1e). For linear polarization modulation (H-V in Figure 1e), the value of VHV_H is negligible. A similar result is obtained in another AA-stacked MoS2/WSe2\mathrm{MoS}_2/\mathrm{WSe}_2 sample (Sample 2, see Figure S3 in the Supplementary Information). In contrast, no VHE at room temperature is observed for the monolayer MoS2\mathrm{MoS}_2 sample (Figure S4 in the Supplementary Information).

Photoluminescence spectrum of MoS2/WSe2 heterostructure at 140 K

Figure S2. Photoluminescence spectrum of MoS2_2/WSe2_2 heterostructure at 140 K. (a) PL spectrum as a function of the gate voltage. The black dashed line cut corresponds to the spectrum shown in (b). (b) PL spectrum at Vg=−29V_{\mathrm{g}} = -29 V. The neutral, local, and charged exciton are marked as XWX_{\mathrm{W}}, XLX_{\mathrm{L}}, and TWT_{\mathrm{W}}, respectively. The orange line indicates the 726 nm excitation laser used in the main text.

Room temperature VHE in another MoS2/WSe2 sample

Figure S3. Room temperature VHE in another MoS2_2/WSe2_2 sample (Sample 2). (a) Optical image of the sample. The red dot is the 220 μ\muW, 726 nm optical excitation location, while the red dashed line is the heterostructure sample boundary. (b) Electronic configuration for Hall voltage measurement. The red dot is the excitation location (c) Observation of VHE at room temperature. The black and red symbols are the measured difference between the Hall voltage under the right and left circular polarization (R-L) and under the left and right circular polarization (L-R), respectively. The lines are linear fitting.

Negligible room temperature VHE in the MoS₂ monolayer sample

Figure S4. Negligible room temperature VHE in the MoS₂ monolayer sample. (a) Back-reflection image of the sample. The red dot is the 11 μW\mu\mathrm{W}, 726 nm optical excitation location, while the red dashed line is the heterostructure sample boundary. (b) Electronic configuration for Hall voltage measurement. (c) Negligible VHE at room temperature. The black and red symbols are the measured difference between the Hall voltage under the right and left circular polarization (R-L) and under the left and right circular polarization (L-R), respectively. The lines are linear fitting. A gate voltage of 30 V is applied to increase the magnitude of VHE (see Figure S5 for the gate dependence of VHE in the MoS₂ monolayer sample at 140K).

Gate dependence measurement of VHE

To study the gate dependence of the VHE, the value of VHV_{\mathrm{H}} (right minus left circular polarization) is measured as VgV_{\mathrm{g}} is swept from -32 V to 20 V at different VxV_{\mathrm{x}} values ranging from -50 mV to 50 mV (Figure 2a). The 220 μ\muW, 726 nm excitation location is indicated as a red dot in Figure 1d. Two line-cuts in Figure 2a at Vg=−23.5V_{\mathrm{g}}=-23.5 V and Vg=−28.25V_{\mathrm{g}}=-28.25 V are shown in Figure 2b. The data are fitted with the function VH=αHVx+βHV_{\mathrm{H}}=\alpha_{\mathrm{H}}V_{\mathrm{x}}+\beta_{\mathrm{H}}. The αH\alpha_{\mathrm{H}} and βH\beta_{\mathrm{H}} are proportional to Hall conductivity and circular photocurrent (CPC), respectively. As can be seen from Figure 2b, the sign of αH\alpha_{\mathrm{H}} is changed, indicating the change in the VHE polarity. The plots of αH\alpha_{\mathrm{H}} and βH\beta_{\mathrm{H}} as a function of VgV_{\mathrm{g}} are shown in Figure 2c. It shows that both the polarity and magnitude of the VHE are gate tunable, in contrast with the VHE in MoS2\mathrm{MoS}_2 monolayer where only its magnitude is gate tunable[4, 9] (see Figure S5 in the Supplementary Information for the gate dependence of VHE in a MoS2\mathrm{MoS}_2 monolayer sample). We also observed that the VHE and CPC are zero and optimum (i.e., maximum or minimum) at the same gate voltage, indicating that they share similar photovoltaic mechanisms.

Gate dependence measurement of VHE and longitudinal conductivity at 240 K

Figure 2. Gate dependence measurement of VHE and longitudinal conductivity at 240 K. (a) The VHV_{\mathrm{H}} as a function of VxV_{\mathrm{x}} and VgV_{\mathrm{g}}. The black (red) dashed line corresponds to the black (red) symbols in (b). (b) The linear fitting (VH=αHVx+βHV_{\mathrm{H}} = \alpha_{\mathrm{H}} V_{\mathrm{x}} + \beta_{\mathrm{H}}) of VHV_{\mathrm{H}} versus VxV_{\mathrm{x}} at Vg=−23.5V_{\mathrm{g}} = -23.5 V (black line) and Vg=−28.25V_{\mathrm{g}} = -28.25 V (red line). (c) The αH\alpha_{\mathrm{H}} (proportional to VHE) and βH\beta_{\mathrm{H}} (proportional to CPC) as a function of VgV_{\mathrm{g}}. The shaded area represents a 95% confidence interval. (d) Gate dependence of the longitudinal conductivity (σxx\sigma_{\mathrm{xx}}). The inset in (d) is the linear fitting of IxI_{\mathrm{x}} versus VxV_{\mathrm{x}} at Vg=(0,10,20V_{\mathrm{g}} = (0, 10, 20 V).

Gate dependence of VHE and longitudinal conductivity in the MoS₂ monolayer sample at 140K

Figure S5. Gate dependence of VHE and longitudinal conductivity in the MoS₂ monolayer sample at 140K. VHE (black symbols and line) and longitudinal conductivity (red symbols and line) versus the back-gate voltage. The inset shows a semi-log plot of the same back-gate voltage dependence. Only VHE magnitude is gate tunable.

Additionally, the current passing through the voltage source VxV_{\mathrm{x}} (denoted as IxI_{\mathrm{x}}) is also measured. The inset of Figure 2d shows the plot of IxI_{\mathrm{x}} versus VxV_{\mathrm{x}} at three different gate voltages showing a linear behavior with a zero offset. The longitudinal conductivity (σxx\sigma_{\mathrm{xx}}) gate dependence, obtained from the slope of IxI_{\mathrm{x}} versus VxV_{\mathrm{x}}, is shown in Figure 2d. The conductivity within the considered gate voltage range is > 0.01 μ\muS, corresponding to a sample resistance of < 100 MΩ\Omega (see the log-linear plot in Figure S6 in the Supplementary Information). The conductivity is monotonically increasing with the gate voltage that the sample stays in one doping regime (n-doped). By comparing Figure 2c and Figure 2d, we can conclude that the VHE and CPC become significant near the neutral doped regime. In this regime, both photogenerated electron and hole can induce the Hall voltage and photocurrent, as we discussed below.

Log-linear plot of Sample 1 longitudinal conductivity gate dependence at 240 K

Figure S6. Log-linear plot of Sample 1 longitudinal conductivity gate dependence at 240 K. Within the considered gate voltage, the longitudinal conductivity is >0.01 μS> 0.01\ \mu\mathrm{S}, corresponding to sample resistance of <100 MΩ< 100\ \mathrm{M}\Omega.

Photocurrent gate dependence

To unveil the mechanism of VHE, we also investigate the gate dependence of the photocurrent under the unpolarized excitation. The setup of this measurement is shown in Figure 2.

3a. An optical chopper controlled by a second function generator is added. A bias voltage VyV_y (between electrode 1 and 4) is applied. While the excitation is still modulated between the left and right circular polarization, the lock-in amplifier is in-sync with the chopper modulation instead of the LCR one. Hence, the measured VPCV_{\mathrm{PC}} is the difference between the measured voltage under unpolarized optical excitation and the measured voltage under no optical excitation.

The value of VPCV_{\mathrm{PC}} is measured as VgV_g is swept from -32 V to 20 V at different VyV_y values ranging from -50 mV to 50 mV (Figure 3b). Two line-cuts in Figure 3b at Vg=−8V_g=-8 V and Vg=−19V_g=-19 V are shown in Figure 3c. The data are fitted with the function VPC=αPCVy+βPCV_{\mathrm{PC}}=\alpha_{\mathrm{PC}}V_y+\beta_{\mathrm{PC}}. The plots of βPC\beta_{\mathrm{PC}} (proportional to the unpolarized photocurrent (PC)) as a function of VgV_g are shown in Figure 3d (see Figure S7 in the Supplementary Information for the plot of αPC\alpha_{\mathrm{PC}} (proportional to the photoconductivity) versus VgV_g). As can be seen from this figure, the unpolarized PC does not show polarity change confirming that the VHE polarity’s gate-tunability is related to the valley optical selection rule. Moreover, by comparing Figure 3d and Figure 2c, we can see that (1) VHE vanishes when the PC is negligible, and (2) PC reaches maximum magnitude when VHE changes polarity. We also note that the observed gate dependence of the PC (Figure 3d) and the longitudinal conductivity (Figure 2d) is very similar to the one observed in Ref [30], which indicates similar PC mechanisms.

Photocurrent gate dependence at 240 K

Figure 3. Photocurrent gate dependence at 240 K. (a) Experimental setup. (b) The VPCV_{\mathrm{PC}} as a function of VyV_y and VgV_g. The black (red) dashed line corresponds to the black (red) symbols in (c). (c) The linear fitting (VPC=αPCVy+βPCV_{\mathrm{PC}} = \alpha_{\mathrm{PC}}V_y + \beta_{\mathrm{PC}}) of VPCV_{\mathrm{PC}} versus VyV_y at Vg=−8V_g = -8 V (black line) and Vg=−19V_g = -19 V (red line). (d) The βPC\beta_{\mathrm{PC}} (proportional to PC) as a function of VgV_g. The shaded area represents a 95% confidence interval.

Photoconductivity gate dependence at 240 K

Figure S7. Photoconductivity gate dependence at 240 K. The αPC\alpha_{\mathrm{PC}} (proportional to PC) obtained from the linear fitting (VPC=αPCVg+βPCV_{\mathrm{PC}} = \alpha_{\mathrm{PC}}V_g + \beta_{\mathrm{PC}}) is plotted as a function of VgV_g. The shaded area represents a 95% confidence interval.

Bipolar nature of VHE mechanism

The gate voltage controls the electron and hole contribution to PC, as illustrated in Figure 4(a-Figure 4e). At high positive gate voltages (Figure 4e), the photogenerated electron cannot be collected due to the in-plane lateral Schottky barrier near the electrode-MoS2/WSe2\mathrm{MoS}_2/\mathrm{WSe}_2 interface31, while the photogenerated hole has a short relaxation time due to the large free electron density and the occupied defect state in WSe2\mathrm{WSe}_2 layer32,33 (see Supplementary Note II for discussion on band structure and defect state energy levels33). This results in a negligible PC. As the gate voltage is reduced, the defect states in WSe2\mathrm{WSe}_2 are emptied, and the free electron density is reduced, resulting in a longer relaxation time for the photogenerated hole and, thus, higher PC. Hence, in this regime, the PC is dominated by the contribution from the hole in WSe2_2 (i.e., photohole-dominated regime (region II), Figure 4d). Reducing the gate voltage further, the system enters the transition regime (shaded region, Figure 4c), where both photogenerated electron and hole can be collected, increasing the PC. As the gate voltage is reduced more, the system enters a regime where the photogenerated hole cannot be collected due to the Schottky barrier, reducing the PC. In this regime, PC is dominated by the photogenerated electron transport contribution in the MoS2_2 layer (i.e., photoelectron-dominated regime (region I), Figure 4b). These four regimes (Figure 4(b-Figure 4e)) are observed in our experiment. If the gate voltage is reduced further, the p-doped regime can be reached (Figure 4a, unobserved in the experiment). In this regime, the photogenerated electron relaxation time will be significantly reduced due to the vacant defect states in MoS2_2 layer32-34 and large free hole density32, resulting in negligible PC.

VHE and PC gate dependence mechanism

Figure 4. VHE and PC gate dependence mechanism. Middle left: legend. Middle center: VHE and PC as functions of the gate voltage. Middle right: due to the band shift, both the electron and hole generated by circularly polarized light have valley-dependent velocity components in the same direction. (a-e) PC mechanism. (f-j) VHE mechanism. At high negative gate voltage (a, f), photogenerated electron and hole cannot be collected, resulted in negligible VHE and PC. In Region I (b, g), the carrier transport is dominated by the photogenerated electron transport in the MoS2_2 layer. In the transition (shaded) region (c, h), both photogenerated electron and hole contribute. The PC reaches maximum value because the valley-independent velocity component of electron and hole have opposite direction, while the VHE changes polarity because the valley-dependent velocity components of electron and hole have the same direction. In Region II (d, i), the carrier transport is dominated by the

The PC mechanism described above is consistent with the VHE result caused by valley-polarized electrons and holes, as illustrated in Figure 4(f-Figure 4j). At a high gate voltage, the photogenerated electron and hole cannot be collected (Figure 4j), resulting in a negligible VHE. As the gate voltage is reduced, the system enters region II (Figure 4i), where the contribution from the photogenerated hole dominates the VHE. Eventually, it enters the transition regime (shaded area, Figure 4h), where both hole and electron contribute to the VHE. In contrast to the PC, which reaches its maximum magnitude in the transition regime, the VHE reaches a point where it vanishes due to the opposite VHE contribution of photogenerated electron and hole. Such opposite contributions happen when the VHE is caused by the electrically induced valley-dependent band shift35. As illustrated in Figure 4 (middle right), due to the band shift, the energy band slope for photogenerated electron and hole at one valley have the same sign, which means their valley-dependent velocity components have the same direction. This mechanism agrees with the sample's CPC map (see Figure S9 and Supplementary Note III in the Supplementary Information). As the gate voltage is reduced further, the system enters region I (Figure 4g), where the contribution from the photogenerated electron dominates the VHE. Our experiment stops at this regime. In a regime with even more negative gate voltage, the system will enter the p-doped regime. In this regime (Figure 4f), the photogenerated electron and hole cannot be collected, resulting in negligible VHE. Other possible contributions to VHE are discussed in Supplementary Note III. Additional data and discussion on the temperature dependence support our interpretation (see Supplementary Note IV).

CPC maps at 140 K for Sample 1: experimental and simulation results

Figure S9. CPC map at 140 K for Sample 1. (a) Experimental result. The CPC map shows normalized CPC at 140 K with the electronic configuration as in Figure 1c in the main text. A 7 μW\mu\mathrm{W}, 726 nm optical excitation is used. No back gating is applied. The electrodes’ edges and the heterostructure region boundary are illustrated by solid and dashed black lines, respectively. The electrode numbering is the same as in Figure 1b in the main text. Electrode 1 and 4 are used to collect the CPC. (b) Simulation result.

photogenerated hole transport in the WSe2_2 layer. At high positive gate voltage (e, j), photogenerated electron and hole cannot be collected, resulted in negligible VHE and PC.

Conclusion

In summary, we have demonstrated a robust room-temperature valley Hall effect in MoS2_2/WSe2_2 heterostructures. We have shown that the back-gate voltage can control both the polarity and the magnitude of the Hall voltage in our valleytronic transistor device. We attributed this gate dependence to the bipolar nature of the carrier transport and the electrically induced valley dependent band shift in the heterostructure. The full gate tunability can be used to improve the ON/OFF ratio of the valleytronic transistor and to realize more compact valleytronics logic circuits (see Supplementary Note V). Additionally, the layer- and carrier-dependent VHE demonstrated here enables the separation of the contribution from different carrier types to the valley current, which adds to the toolbox for carrier transport characterization36. Moreover, recently, excellent charge transport and the possibility of flexible stacking between metal and 2D materials have been achieved37,38, and a designated substrate can facilitate the valley transport39,40. Together with these facts, our results can provide novel platforms for valleytronic devices and carrier characterization in 2D material in the future.

Methods

Sample fabrication

The MoS2_2/WSe2_2 heterobilayer is fabricated using the standard dry transfer method. Monolayers are firstly exfoliated on polydimethylsiloxane (PDMS) films. The PDMS films with monolayer are then sequentially aligned and stamped on a silicon substrate with a 300 nm SiO2_2 overlayer to make a van der Waals heterobilayer. The metal electrodes, consisting of 5 nm thick Cr and 50 nm thick Au, are fabricated using standard electron beam lithography (EBL) and thermal evaporation techniques.

Optical setup

The heterobilayer sample is mounted in a closed-cycle cryostat for room temperature and low-temperature experiments. A tunable Ti-sapphire laser is used as the excitation source. The laser is directed by a single-mode fiber to the homemade setup. A galvanometer scanner is used for scanning the laser beam over the heterobilayer region. A polarizer and a liquid crystal retarder are mounted after the scanner to perform polarization modulation. The laser beam is focused by an objective to sub-μ\mum in diameter on the sample surface. Since the heterobilayer region is small (∼\sim2 μ\mum ×\times 6 μ\mum), the laser beam scanning over this region can be approximated as a normal incidence excitation.

Electrical measurement setup

The longitudinal voltage is applied using a Keithley 2636B source meter. The Hall signal and photocurrent signal are amplified by a differential preamplifier with an amplification factor of 500 (A-M Systems, Inc. Model 3000) and a lock-in amplifier with an amplification factor of 1000. The lock-in amplifier references the frequency of the liquid crystal retarder. A square wave of 33 Hz is used to modulate the liquid crystal retarder for polarization modulation.

Acknowledgments

We thank the discussion with Feng Wang, Wang Yao. acknowledge the financial support from the Singapore National Research Foundation through its Competitive Research Program (CRP Award No. NRF-CRP21-2018-0007, NRF-CRP22-2019-0004), Singapore Ministry of Education (MOE2016-T2-2-077, MOE2016-T2-1-163, MOE2016-T31-006 (S)). Q.X. gratefully acknowledges National Natural Science Foundation of China (No. 12020101003) and start-up grant from Tsinghua University.

Determination of MoS2_2/WSe2_2 samples stacking alignment

The stacking sequence can be determined from the second harmonic generation measurement (SHG). For the AA stacking, the SHG from the heterostructure is stronger than the SHG from the individual monolayers, while for AB stacking, it is weaker[1]. The SHG measurement from Sample 1 and Sample 2 are shown in Figure S1, Figure S1). From these figures, it can be seen that the SHG from the heterostructure is stronger than from the individual monolayer, indicating that our samples are AA-stacked heterostructures.

Band structure and defect state energy levels

In Figure S8, the band structure of the MoS2/WSe2MoS_{2}/WSe_{2}, including the energy level range for the defects states in MoS2MoS_{2} (ee and ee-ee defect state from sulfur-atom vacancy and divacancy) and WSe2WSe_{2} (ee defect state from selenium-atom vacancy)[2], is shown together with the work function of the metal electrode (Cr and Au)[3]. Here, we use 4.2 eV and 3.6 eV as the electron affinity in monolayer MoS2_2 and WSe2_2, respectively[4, 5]. The energy level values are their value in eV with respect to the vacuum energy level. The orange, blue, and grey (black) represents the energy levels in MoS2_2, WSe2_2, and electrode, respectively. The shaded areas are the possible range of energy levels for the defects and the electrode’s effective Fermi level, while the solid lines are their most likely energies.

MoS$_2$/WSe$_2$ band structure and defect state energy levels

Figure S8. MoS2_2/WSe2_2 band structure and defect state energy levels. The energy level values are their value in eV with respect to the vacuum energy level. The orange, blue, and grey (black) represents the energy levels in MoS2_2, WSe2_2, and electrode, respectively. The shaded areas are the possible range of energy levels for the defects and the electrode’s effective Fermi level, while the solid lines are their most likely energies.

For WSe2_2, the defect state is split due to the spin-orbit coupling[2]. Regarding the electrode’s effective Fermi level (solid black line), we take it to be the average of the Cr and Au Fermi levels. The solid lines are used in Figure 4 in the main text (note: only one WSe2_2 defect level is shown in that figure for simplicity). The dashed purple line is the intrinsic Fermi level of the heterostructure.

More discussion on CPC map and optoelectronic response

From the fact that our sample has AA stacking alignment (see Figure S1 and Supplementary Note I), we argue that the primary driving mechanism behind the VHE is not the conventional intrinsic anomalous velocity[6], which can be expressed as v⃗Aconv=±eℏE⃗×Ω⃗n,k⃗\vec{v}_{\mathrm{A}}^{\mathrm{conv}} = \pm\frac{e}{\hbar}\vec{E} \times\vec{\Omega}_{n,\vec{k}} with ee is the electron charge, the + (-) sign is for the hole (electron), ℏ\hbar is the reduced Planck constant, E⃗\vec{E} is the electric field, Ω⃗n,k⃗\vec{\Omega}_{n,\vec{k}} is the Berry curvature at band nn and momentum k⃗\vec{k}. Unlike the AB-stacked case[7, 8], in an AA-stacked MoS2_2/WSe2_2, the Berry curvatures of the conduction band in MoS2_2 and valence band in WSe2_2, at the same momentum, have the same sign. As a result, the valley electron's anomalous velocity in the MoS2_2 layer has an opposite direction to the valley hole's anomalous velocity in the WSe2_2 layer. This argument contradicts the experimental results that indicate that the valley-dependent velocity of electron and hole must have opposite direction. Therefore, our results mean that the primary mechanism behind VHE in our sample is not the conventional anomalous velocity.

To know the VHE and CPC mechanism in more detail, we obtain the low temperature (140 K) normalized CPC map for Sample 1, as shown in Figure S9. It is obtained using a 7 μ\muW, 726 nm optical excitation. No back gating is applied. The CPC is collected using electrode 1 and 4 with positive CPC means that current is flowing into electrode 1 from the sample. The simulation result of the CPC map using the theoretical model described in Ref [9, 10] (Figure S9) shows a good agreement with the experimental result.

In this model, the in-plane electric field causes the valence band to shift with the shift’s direction is opposite for K and K’ valleys. Using the normal velocity relation[11]

v⃗c=∇k⃗εn(k⃗)ℏ\vec{v}_{c} = \frac{\nabla_{\vec{k}}\varepsilon_{n}(\vec{k})}{\hbar}

, where v⃗c\vec{v}_{c} is the carrier (electron or hole) velocity and εn(k⃗)\varepsilon_{n}(\vec{k}) is the electron energy at band nn and momentum k⃗\vec{k}, it can be shown that the band shift-induced velocity is proportional to the shift. The shift always has a component perpendicular to the electric field resulted in the band shift-induced anomalous velocity, while a strain influence can cause an additional component parallel to the electric field. The excellent agreement between the theoretical and experimental results in Figure S9 indicates that the CPC is caused by this electrically induced valence band shift. Based on Figure 2c in the main text, the VHE and CPC have a similar origin. Hence, the VHE should also be caused by the electrically induced valence band shift.

The CPC map can also be used to analyze the trion contribution. Based on the map, the CPC is strongest near the edge of the electrode. As has been shown in Figure 2c in the main text, VHE is proportional to CPC. A strong VHE near the edge shows that the VHE is caused by free carriers resulted from the exciton dissociation instead of trions[12]. Hence, we can neglect the trion contribution for VHE under 726 nm optical excitation.

Similar to the case in Ref [9], the nonzero PC and CPC under normal incidence signify that our system’s symmetry has, at most, only one mirror symmetry, and the C3C_{3} symmetry of TMD is broken[13, 14, 15]. This reduced symmetry can be understood from three facts: (1) the TMD heterostructure can have incommensurate stacking resulted in the absence of any rotation and mirror symmetry[16], (2) the symmetry breaking can be induced by the strain in the sample, and (3) the excitation location is not symmetrical with respect to the two current-collecting electrodes (electrode 1 and 4).

Lastly, we note that the mechanism in Figure 4 in the main text does not apply to the longitudinal conductivity and the unpolarized photoconductivity. This mechanism only works when the Schottky barrier’s blocking effect is dominant. On the contrary, the linear behavior of the longitudinal transfer characteristics (i.e., IxI_{x} versus VxV_{x}, inset of Figure 2d in the main text) indicates that the Schottky barrier blocking effect is negligible for the longitudinal transport driven by an external voltage source[17]. Additionally, the mechanism in the main text’s Figure 4 also does not apply when the excitation location is in the Schottky barrier regime (depletion regime). At this location, the electric field due to the Schottky barrier will contribute to the photo-induced emf negating the barrier’s blocking effect. This reasoning indicates that the gate dependence depends on the excitation location, which should be investigated in further studies.

Gate dependence at low temperature (140 K)

From the VHE and PC mechanism described in the main text, we can predict that both the magnitude and polarity of the VHE at low temperature should also be gate tunable. Moreover, VHE and CPC at low temperature should also be correlated. However, while at high temperature, the hole mobility in WSe2_{2} can be comparable to the electron mobility in MoS2_{2}, at low temperature, the hole mobility is much smaller than electron mobility[18, 19]. Consequently, the magnitude of the extremum points (maximum positive or negative) of the VHE and CPC will be largely different from each other. Since electron mobility at low temperature is much larger than the hole’s, the extremum points of VHE and CPC at photoelectron dominated regime (more negative gate voltage) will also be much larger than the one at photohole dominated regime (more positive gate voltage). This difference in carrier mobility will also mean that the photohole contribution to the PC is negligible. As a result, the peak of the PC should happen at the same gate voltage as the VHE extremum point at the photoelectron dominated regime.

The experimental result regarding the gate dependence of VHE, CPC, and PC at 140 K are shown in Figure S10, Figure S10). The excitation location is as in Figure 1d in the main text. As in the main text, VH=αHVx+βHV_{\mathrm{H}} = \alpha_{\mathrm{H}} V_x + \beta_{\mathrm{H}}, and VPC=αPCVy+βPCV_{\mathrm{PC}} = \alpha_{\mathrm{PC}} V_y + \beta_{\mathrm{PC}}. Hence, VHE, CPC, and PC are proportional to αH\alpha_{\mathrm{H}}, βH\beta_{\mathrm{H}}, and βPC\beta_{\mathrm{PC}}, respectively. From Figure S10, we can see that the VHE magnitude and polarity's gate tunability is also observed at low temperature. The VHE and CPC are zero and optimum (i.e., maximum or minimum) at the same gate voltage, showing a strong correlation between them. We can also see that the magnitude of the peak at Vg∼−25V_g \sim-25 V is much larger than the dip at Vg∼−14V_g \sim-14 V. From Figure S10, we can see that the peak of the PC also happens at Vg∼−25V_g \sim-25 V. These observations are in line with our prediction, supporting the VHE and PC mechanism described in the main text.

Gate dependence of VHE, CPC, and PC at 140 K for Sample 1

Figure S10. Gate dependence of VHE, CPC, and PC at 140 K for Sample 1. (a) The αH\alpha_{\mathrm{H}} (proportional to VHE) and βH\beta_{\mathrm{H}} (proportional to CPC) as a function of VgV_{\mathrm{g}}. The shaded area represents a 95% confidence interval. (b) The βPC\beta_{\mathrm{PC}} (proportional to PC) as a function of VgV_{\mathrm{g}}. The shaded area represents a 95% confidence interval.

Application of full gate tunability

In this section, we discuss potential applications of the full gate tunability (i.e., both the polarity and magnitude are gate tunable). Here we consider the doping control by an offset gate voltage.

A valleytronic transistor with no limitation on the ON/OFF ratio

The valleytronic transistor operation is depicted in Figure S11. In a valleytronic transistor, the bias voltage VxV_{\mathrm{x}} remains constant while the gate voltage VgV_{\mathrm{g}} acts as an input and the Hall voltage VHV_{\mathrm{H}} is the output. A constant gate voltage offset Vg0V_{\mathrm{g0}} can be used to control the initial doping. A positive Hall voltage indicates an ON state, while a zero Hall voltage indicates an OFF state. In the MoS2\mathrm{MoS}_2 valleytronic transistor, the ON/OFF ratio is limited by the nonzero minimum Hall voltage (Figure S11). On the contrary, in the MoS2/WSe2\mathrm{MoS}_2/\mathrm{WSe}_2 valleytronic transistor, since the Hall voltage’s polarity can be changed from positive to negative, zero Hall voltage can be achieved (Figure S11). Consequently, there is no limitation on the ON/OFF ratio.

Valleytronic transistor schematic and transfer characteristics

Figure S11. Valleytronic transistor. (a) Valleytronic transistor schematic. The bias voltage VxV_x and the offset gate voltage Vg0V_{g0} remains constant. The input is the gate voltage VgV_g and the output is the Hall voltage VHV_H. (b) MoS2_2 valleytronic transistor transfer characteristic. The minimum value of VHV_H for the OFF state is finite, limiting the ON/OFF ratio. (c) MoS2_2/WSe2_2 valleytronic transistor transfer characteristic. The minimum value of VHV_H for the OFF state can reach zero, removing the limitation on the ON/OFF ratio.

A more compact two-input valleytronics logic circuit

The Hall bar structure can also be used as a two-input valleytronics logic gate. In this case, both the bias voltage VxV_x and gate voltage VgV_g act as inputs while Hall voltage VHV_H is the output (see Figure S12). The bias voltage is kept at zero when the logic gate is unused to reduce power consumption. A constant gate voltage offset Vg0V_{g0} is used to control the initial doping.

Image not extracted

Figure S12. Valleytronic logic gate. (a) Valleytronic logic gate schematic. The offset gate voltage Vg0V_{g0} remains constant. The inputs are the gate voltage VgV_g and the bias voltage VxV_x. The output is the Hall voltage VHV_H. (b) MoS2_2 NAND valleytronic logic gate. The illustration of VHV_H versus VgV_g at two different VxV_x are shown. (c) MoS2_2/WSe2_2 NAND valleytronic logic gate. (d) MoS2_2/WSe2_2 XNOR valleytronic logic gate. The value of Vg0V_{g0} here is different from the one in (c).

Due to the full gate tunability, the MoS2/WSe2\mathrm{MoS}_2/\mathrm{WSe}_2 valleytronics logic gate is more versatile than the MoS2\mathrm{MoS}_2 one. This can be seen by comparing the possible operation regimes and truth tables of these two logic gates (see Figure S11-Figure S11)). Here, a negative voltage represents ‘1’, while a zero or positive voltage represents output ‘0’. The MoS2\mathrm{MoS}_2 Hall bar structure can only be used as a NAND gate (Figure S11), while the MoS2/WSe2\mathrm{MoS}_2/\mathrm{WSe}_2 can be used as a NAND (Figure S11) or XNOR gate (Figure S11) depending on the offset gate voltage value. Since an XNOR gate can only be created using at least five NAND gates, a MoS2/WSe2\mathrm{MoS}_2/\mathrm{WSe}_2 valleytronic logic circuit will have fewer components than the MoS2\mathrm{MoS}_2 one.

Valleytronic transistor logic-gate schematics and truth tables

Figure 5 (PDF p. 31).

References

  1. [1]Hsu, W.-T. et al. Second harmonic generation from artificially stacked transition metal dichalcogenide twisted bilayers. ACS Nano 8, 2951-2958, doi:10.1021/nn500228r (2014).DOI
  2. [2]Jeong, T. Y. et al. Spectroscopic studies of atomic defects and bandgap renormalization in semiconducting monolayer transition metal dichalcogenides. Nature Communications 10, 3825, doi:10.1038/s41467-019-11751-3 (2019).DOI
  3. [3]Waldrop, J. R. Electrical properties of ideal metal contacts to GaAs: Schottky - barrier height. Journal of Vacuum Science & Technology B: Microelectronics Processing and Phenomena 2, 445-448, doi:10.1116/1.582892 (1984).DOI
  4. [4]Liang, Y., Huang, S., Soklaski, R. & Yang, L. Quasiparticle band-edge energy and band offsets of monolayer of molybdenum and tungsten chalcogenides. Applied Physics Letters 103, 042106, doi:10.1063/1.4816517 (2013).DOI
  5. [5]Özçelik, V. O., Azadani, J. G., Yang, C., Koester, S. J. & Low, T. Band alignment of two-dimensional semiconductors for designing heterostructures with momentum space matching. Physical Review B 94, 035125, doi:10.1103/PhysRevB.94.035125 (2016).DOI
  6. [6]Sundaram, G. & Niu, Q. Wave-packet dynamics in slowly perturbed crystals: gradient corrections and Berry-phase effects. Physical Review B 59, 14915-14925, doi:10.1103/PhysRevB.59.14915 (1999).DOI
  7. [7]Gong, Z. et al. Magnetoelectric effects and valley-controlled spin quantum gates in transition metal dichalcogenide bilayers. Nature Communications 4, 2053, doi:10.1038/ncomms3053 (2013).DOI
  8. [8]Lee, J., Mak, K. F. & Shan, J. Electrical control of the valley Hall effect in bilayer MoS₂ transistors. Nature Nanotechnology 11, 421-425, doi:10.1038/nnano.2015.337 (2016).DOI
  9. [9]Rasmita, A. et al. Tunable geometric photocurrent in van der Waals heterostructure. Optica 7, 1204-1208, doi:10.1364/OPTICA.393381 (2020).DOI
  10. [10]Rasmita, A. Light-matter interaction in 2D transition metal dichalcogenide heterostructure : magneto photoluminescence, lasing, and photocurrent. Ph.D. thesis, Nanyang Technological University, (2020).DOI
  11. [11]Xiao, D., Chang, M.-C. & Niu, Q. Berry phase effects on electronic properties. Reviews of Modern Physics 82, 1959-2007, doi:10.1103/RevModPhys.82.1959 (2010).DOI
  12. [12]Ubrig, N. et al. Microscopic origin of the valley Hall effect in transition metal dichalcogenides revealed by wavelength-dependent mapping. Nano Letters 17, 5719-5725, doi:10.1021/acs.nanolett.7b02666 (2017).DOI
  13. [13]Quereda, J. et al. Symmetry regimes for circular photocurrents in monolayer MoSe₂. Nature Communications 9, 3346, doi:10.1038/s41467-018-05734-z (2018).DOI
  14. [14]Kiemle, J., Zimmermann, P., Holleitner, A. W. & Kastl, C. Light-field and spin-orbit-driven currents in van der Waals materials. Nanophotonics 9, 2693-2708, doi:https://doi.org/10.1515/nanoph-2020-0226 (2020).
  15. [15]Glazov, M. M. & Ganichev, S. D. High frequency electric field induced nonlinear effects in graphene. Physics Reports 535, 101-138, doi:https://doi.org/10.1016/j.physrep.2013.10.003 (2014).
  16. [16]Wang, Y., Wang, Z., Yao, W., Liu, G.-B. & Yu, H. Interlayer coupling in commensurate and incommensurate bilayer structures of transition-metal dichalcogenides. Physical Review B 95, 115429, doi:10.1103/PhysRevB.95.115429 (2017).
  17. [17]Schulman, D. S., Arnold, A. J. & Das, S. Contact engineering for 2D materials and devices. Chemical Society Reviews 47, 3037-3058, doi:10.1039/C7CS00828G (2018).DOI
  18. [18]Jin, Z., Li, X., Mullen, J. T. & Kim, K. W. Intrinsic transport properties of electrons and holes in monolayer transition-metal dichalcogenides. Physical Review B 90, 045422, doi:10.1103/PhysRevB.90.045422 (2014).DOI
  19. [19]Xu, S. et al. Universal low-temperature Ohmic contacts for quantum transport in transition metal dichalcogenides. 2D Materials 3, 021007, doi:10.1088/2053-1583/3/2/021007 (2016).DOI

Paper details

vlnc:W_ffv5ykkd
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents