betaFeedback

WorksPhysics and Astronomy

From quasiperiodic three-colour order on a triangular lattice to covalent carbon sheets

Abstract

Can the quasiperiodic colouring of a lattice be encoded in the bonds of a single carbon sheet? We construct golden-, silver- and bronze-mean three-colour patterns on a triangular lattice. The positions of one colour determine the other two through a nearest-neighbour rule. The three patterns have eight, nine and seven first-shell environments, respectively. A triangle of three identical motifs frustrates the alternating bond ports of each of the three molecular alphabets in the golden and silver patterns. The bronze pattern admits four designs with direct or ethynylene connections. Three periodic structures reproduce its infinite environment frequencies in a local-energy model. For a 708-atom sheet with independently matched environment counts, the predicted energy lies 0.295 meV per carbon below the density-functional result. Across four periodic cells initialized from two smaller donors, relaxation changes the bond lengths by at most 0.00113 angstroms in root-mean-square terms. Fitting one 60-degree sector to relaxed periodic geometries gives complete sixfold-symmetric fragments with up to 22,140 carbon atoms. In the 13,950-atom directly linked sheet, a ππ doublet places 79.05% of its weight in a boundary shell comprising 7.96% of the atoms, whereas the lowest unoccupied doublet places only 0.124% there. These calculations connect a testable motif-selection rule to the energetics and finite-patch spectra of candidate quasiperiodic carbon sheets.

Introduction

Quasicrystals established that long-range structural order need not be generated by translations of a unit cell[1, 2, 3]. Inflation rules and higher-dimensional constructions make this departure from periodicity precise, linking local patterns to irrational proportions and hierarchies of length scales. The range of such structures extends beyond the familiar fivefold Penrose geometry[4]: hexagonal bronze-mean order, aperiodic hexagonal tilings and sequence-modulated triangular networks reveal distinct ways to organize nonperiodic matter[5, 6, 7, 8]. For electrons, this structural freedom raises a direct question: which properties are controlled by a finite catalogue of local environments, and which require the extended hierarchy?

Carbon is a compelling setting for this question because its bonding supports a broad range of connected networks. The experimental biphenylene network, amorphous carbon monolayers and graphdiyne films illustrate the chemical reach of nonhexagonal rings, disorder and acetylenic connectivity[9, 10, 11]. Carbon quasicrystals also have established precedents: 30° twisted bilayer graphene exhibits genuine quasicrystalline order and electronic coupling[12, 13, 14], and diamond quasicrystals have been proposed[15]. Molecular self-assembly supplies another route to two-dimensional quasiperiodic organization[16]. The distinct design problem addressed here is to encode a prescribed aperiodic order in the in-plane covalent connectivity of a single carbon network, rather than to rely on the relative orientation of periodic layers. A proposed geometry must satisfy both global order and local valence constraints; neither condition follows from a visually quasiperiodic pattern alone.

A finite local catalogue suggests a computational strategy, but also imposes a limitation. Small periodic networks can reproduce selected local statistics even when none reproduces the complete infinite structure. Locality and cluster-expansion ideas motivate an energy representation in terms of these statistics[17, 18]; they do not make the electronic energy exactly additive. Conversely, agreement of local energies does not imply agreement of spectra. A periodic band dispersion and a finite aperiodic spectrum answer different questions and require separate calculations. This distinction allows an energy approximation to be tested without replacing the central quasiperiodic object by an arbitrary periodic analogue.

We ask which of three metallic-mean colourings can be written into the connectivity of a single carbon monolayer. The construction puts the quasiperiodic information into a set of A sites. B and C record their surroundings. A local orientation constraint then selects the colourings that three carbon-fragment alphabets can decorate. For the compatible bronze hierarchy we test energy transfer with a separately relaxed large cell. We then use the same periodic basis to construct sixfold-symmetric open fragments and determine which of their frontier states concentrate at the boundary.

Three metallic means on the same triangular lattice

A common recursion generates a set of candidate sites. At the first step take (p,q)=(1,m)(p,q)=(1,m), with m=1,2,3m=1,2,3 for gold, silver and bronze. Every subsequent step replaces (p,q)(p,q) by (q,mq+p)(q,mq+p) and copies the entire previous point set. Place a copy at the origin, one at distance q−pq-p along each of the six lattice directions, and one at each position reached by taking qq steps along a direction and pp along either adjacent direction. The ratio q/pq/p approaches τm=(m+m2+4)/2\tau_m=(m+\sqrt{m^2+4})/2. The first three pairs are (1,1),(1,2),(2,3)(1,1),(1,2),(2,3) for gold, (1,2),(2,5),(5,12)(1,2),(2,5),(5,12) for silver and (1,3),(3,10),(10,33)(1,3),(3,10),(10,33) for bronze.

Take the union of the candidate sites over all levels. Retain each isolated candidate as A. For a candidate with a candidate nearest neighbour, require all three track numbers ∣i∣|i|, ∣j∣|j| and ∣i+j∣|i+j| to belong to Km={round⁡(k/dm):k=0,1,…}K_m=\{\operatorname{round}(k/d_m):k=0,1,\ldots\}, with dmd_m the distance from τm\tau_m to the nearest integer. This last selection is a construction choice. The bronze candidates are all isolated. In gold and silver the candidates cover the lattice and the track test selects the A sites (SI). On every remaining site place C if two opposite nearest neighbours are A, and B otherwise. Thus the same local rule reconstructs the three-colour field from the binary A-site pattern for all three means. Figure 1 compares equal windows of the resulting fields.

Figure 1. Three quasiperiodic colourings and a local bonding obstruction. The upper panels use the same triangular-lattice window and colour key. The B-centred shell in (d) contains an elementary B triangle. In (e), the two signs are the two orientations of the alternating B ports. The dashed bond joins equal orientations in the assignment shown. Reversing the top sign moves the mismatch to the other upper bond. Panel (f) shows one of the two B-centred bronze environments.

Their first-shell catalogues contain eight, nine and seven environments. The decisive chemical constraint is visible on one elementary triangle. The gold and silver patterns contain a B site with six B neighbours at respective frequencies of 29.79% and 27.21% of all lattice sites. Take the centre and any two consecutive neighbours. Each B fragment in the three proposed alphabets has alternating single and double ports and two distinguishable orientations. A matched B–B bond requires opposite orientations. Assigning opposite orientations along the first two edges leaves equal orientations at the ends of the third edge. This excludes the three tested alphabets for gold and silver under the stated matching rule. The obstruction concerns these carbon motifs; other motifs define a different assembly problem.

The chemically compatible bronze hierarchy

Let e1=(1,0)\mathbf{e}_1=(1,0) and e2=(1/2,3/2)\mathbf{e}_2=(1/2,\sqrt{3}/2) define the triangular lattice. Integer coordinates have six neighbour directions

U={(1,0),(0,1),(−1,1),(−1,0),(0,−1),(1,−1)}.(1)U=\{(1,0),(0,1),(-1,1),(-1,0),(0,-1),(1,-1)\}. \tag*{(1)}

Define

p0=1,q0=3,ph+1=qh,qh+1=3qh+ph.(2)p_0=1,\qquad q_0=3,\qquad p_{h+1}=q_h,\qquad q_{h+1}=3q_h+p_h. \tag*{(2)}

The scale ratio approaches the bronze mean β=(3+13)/2\beta=(3+\sqrt{13})/2. With α=(3−13)/2=−β−1\alpha=(3-\sqrt{13})/2=-\beta^{-1},

ph=βh+1−αh+113,qh=βh+2−αh+213.(3)p_h=\frac{\beta^{h+1}-\alpha^{h+1}}{\sqrt{13}},\qquad q_h=\frac{\beta^{h+2}-\alpha^{h+2}}{\sqrt{13}}. \tag*{(3)}

At level hh, take the 19 offsets

Dh={0}∪{(qh−ph)uk}k=05∪{qhuk+phuk±1}k=05,(4)D_h = \{0\} \cup\{(q_h-p_h)u_k\}_{k=0}^{5} \cup\{q_hu_k+p_hu_{k\pm1}\}_{k=0}^{5}, \tag*{(4)}

where the indices are cyclic. Starting with S0={0}S_0=\{0\}, form the set sums Sh+1=Sh+DhS_{h+1}=S_h+D_h, removing duplicates, and let S∞=⋃hShS_\infty=\bigcup_h S_h. A site is coloured A if it belongs to S∞S_\infty; a remaining site is C if it lies midway between two opposite nearest-neighbour A sites, and B otherwise. This is a three-letter labelling, not a proper graph colouring: BB and CC edges are allowed.

The prescription is locally computable despite its infinite union. With ρ(i,j)=max⁡(∣i∣,∣j∣,∣i+j∣)\rho(i,j)=\max(|i|,|j|,|i+j|) and Rh=∑k<h(pk+qk)<2phR_h=\sum_{k<h}(p_k+q_k)<2p_h, a sum whose highest nonzero digit is at level hh has norm at least

Hh=qh−ph−Rh,Hh+1=Hh+ph⟶∞.(5)H_h=q_h-p_h-R_h,\qquad H_{h+1}=H_h+p_h\longrightarrow\infty. \tag*{(5)}

Thus only finitely many recursion levels affect any fixed observation window. The carbon samples G1, G2 and G3 are prescribed complete-ABC supports of this common field, containing respectively (1,0,6)(1,0,6), (19,36,30)(19,36,30) and (235,324,384)(235,324,384) A/B/C sites (Figure 2). Their labels specify finite supports; they are not interchangeable with the digit index hh.

Figure 2. A triangular three-letter hierarchy. G1, G2 and G3 contain 7, 85 and 943 molecular sites. Solid and dashed outlines on G3 mark the convex envelopes of the chosen G1 and G2 supports; they show the generation relationship, not artificial grain boundaries. The lower row gives all seven first-shell environments and their infinite frequencies, rounded to the displayed precision. The finite G3 composition is not substituted for the infinite limit.

The order can be established without relying on appearance. On a lattice axis the recursion is coded by the primitive interval substitution

X↦XYX,Y↦XZX,Z↦XZXZX,(6)X \mapsto XYX,\qquad Y \mapsto XZX,\qquad Z \mapsto XZXZX, \tag*{(6)}

with base words X=ACX=AC, Y=ABBY=ABB and Z=ABBBBZ=ABBBB. Its A density is 2β/(5β+1)2\beta/(5\beta+1), which is irrational; the axis word cannot be periodic. Sixfold invariance then excludes every nonzero planar translation. In addition, a closed 301-state collared-rectangle representation is primitive and carries growing collars; it implies that each finite coloured patch recurs with bounded gaps. The SI gives the construction, integer certificate and recurrence proof. These statements establish aperiodicity and uniform recurrence in real space. A pure-point diffraction theorem for the relaxed atomic networks is a separate assertion and is not inferred from these results.

The same certificate closes the first-shell catalogue at exactly seven environments. Each environment includes the central letter and the cyclic word of its six neighbours, with rotations and reflections identified. In the order displayed in Figure 2, their limiting frequency vector is

f∞=(6,6(β−1),2,2(β+1),6β,6β,3(β+1))23β+7.(7)\mathbf{f}_\infty=\frac{(6,6(\beta-1),2,2(\beta+1),6\beta,6\beta,3(\beta+1))}{23\beta+7}. \tag*{(7)}

Summing by centre gives

(fA,fB,fC)=(2,13−1,3)4+13≃(0.262966,0.342585,0.394449).(8)(f_A,f_B,f_C)=\frac{(2,\sqrt{13}-1,3)}{4+\sqrt{13}}\simeq(0.262966,0.342585,0.394449). \tag*{(8)}

The seven first-shell environments should not be confused with pair interfaces: only AB, AC, BB, BC and CC occur. Chemical port orientations can resolve additional distinctions beyond either catalogue.

From a molecular code to four carbon networks

Each letter carries an oriented carbon fragment and six directional ports. A port contains one or two terminal atoms; matching its multiplicity and orientation across every triangular-lattice edge determines the assembly. Figure 3 shows the three alphabets. Hydrogen caps describe isolated fragment boundaries and are removed where fragments connect. The periodic sheets discussed here contain carbon only.

Figure 3. Three molecular alphabets and four candidate networks. The H-capped fragment diagrams identify each carbon skeleton. The six digits below each fragment give the port multiplicities around its perimeter. H caps are replaced at assembly connections. The lower row shows the four G2 networks, with core colours inherited from A/B/C. Direct assembly of alphabets II and III yields graphene and is therefore not counted as a distinct candidate. The drawings show the construction geometries.

Alphabet I uses a six-carbon benzene core, a 15-carbon hexagon decorated by three pentagons, and a 20-carbon core comprising two fused hexagons with four pentagons. Their H-capped formulas are C6H6\mathrm{C}_6\mathrm{H}_6, C15H9\mathrm{C}_{15}\mathrm{H}_9 and C20H10\mathrm{C}_{20}\mathrm{H}_{10}. Alphabet II uses benzene, phenalenyl and pyrene, with formulas C6H6C_6H_6, C13H9C_{13}H_9 and C16H10C_{16}H_{10}. Alphabet III uses coronene, phenalenyl and naphthalene, C24H12C_{24}H_{12}, C13H9C_{13}H_9 and C10H8C_{10}H_8, with complemented port multiplicities. An odd number of hydrogens in these neutral fragments signals an odd electron count; the capped drawings are not an assertion that every fragment is an isolated closed-shell synthetic precursor. They define candidate carbon skeletons and connection sites, not an established synthesis route.

We consider two link constructions. In an ene network the matched terminal carbons are bonded directly. In a yne network two additional carbon atoms are inserted per terminal pair, producing an ethynylene connection, C–C≡C–C. The latter are graphyne-type networks; a graphdiyne link would instead contain four inserted carbons. These labels define connectivity, while the bond lengths and out-of-plane response remain relaxation variables.

Only four distinct candidates are retained. Directly joining the all-benzenoid fragments of alphabets II and III recovers the ordinary honeycomb network and erases the distinction between molecular blocks. Explicit assembly of A1B0C3, A4B6C5, A7B8C12 and A13B18C18 for each alphabet reduces to a two-carbon graphene primitive cell (SI). Ethynylene insertion retains the marked connections, producing II-yne and III-yne. Alphabet I has nonhexagonal connectivity and gives both I-ene and I-yne. For a closed periodic network with molecular counts (AA, BB, CC), the carbon counts are

NCI-ene=6A+15B+20C,NCI-yne=12A+24B+30C,NCII-yne=12A+22B+26C,NCIII-yne=36A+22B+18C.(9)\begin{aligned} N_{\mathrm{C}}^{\mathrm{I\text{-}ene}} &= 6A + 15B + 20C, \qquad&N_{\mathrm{C}}^{\mathrm{I\text{-}yne}} &= 12A + 24B + 30C,\\ N_{\mathrm{C}}^{\mathrm{II\text{-}yne}} &= 12A + 22B + 26C, \qquad&N_{\mathrm{C}}^{\mathrm{III\text{-}yne}} &= 36A + 22B + 18C. \tag*{(9)} \end{aligned}

Finite samples use explicit atom counts because open ports change the linker contribution. All four generation series supplied here use the same complete-ABC supports, allowing their hierarchy to be compared without changing the molecular boundary convention.

Periodic basis construction and an independent holdout

Periodic calculations enter through two routes. The first assigns oriented A/B/C units on a periodic triangular supercell and tests every port and neighbourhood across its periodic boundaries. The second extracts a cell from the already coloured G3 structure, identifies opposite edges, and then rechecks the periodic seams. It does not recolour a new hexagon. A cut can introduce environments absent from the infinite field, so extraction alone does not certify an admissible energy basis.

We retain only cells whose first-shell environments are a subset of the seven in Eq. (7). In the archived set of 123 records, seven pass this criterion; after accounting for translated duplicates and repetitions of smaller patterns, the relevant patterns are A1B0C3, A4B6C5, A7B8C12 and A13B18C18. For example, the archived N=48N=48 cut fails because its seam creates A:BBBBBC and C:ABBABB centres. It is not included in the basis or in the energy validation.

Figure 4 gives the environment count vectors of the selected cells. The basis vectors have rank three and satisfy the exact identity

Figure 4. An exact local-statistics basis. The three periodic basis cells and the G3-derived A13B18C18 holdout are shown on the triangular lattice. The count matrix uses the same seven labels as Figure 2. The displayed normalized weights match molecular-site frequencies. Cell total energies must instead be combined with Eq. (12), including its atom-count denominator.

(23β+7)f∞=(4−β)nA1B0C3+3nA4B6C5+(β−2)nA7B8C12.(10)(23\beta+ 7)\mathbf{f}_{\infty} = (4-\beta)\mathbf{n}_{\mathrm{A1B0C3}} + 3\mathbf{n}_{\mathrm{A4B6C5}} + (\beta-2)\mathbf{n}_{\mathrm{A7B8C12}}. \tag*{(10)}

When each vector is divided by its number of molecular sites, the corresponding weights are 0.0336158194, 0.5424049825 and 0.4239791982. These are molecular-site weights, not atom weights or weights for cell total energies.

Consider the first-shell local-energy approximation for a fixed chemical family,

Ej=∑μ=17njμϵμ+Rj.(11)E_j = \sum_{\mu=1}^{7} n_{j\mu}\epsilon_\mu+ \mathcal{R}_j. \tag*{(11)}

The residual Rj\mathcal{R}_j includes longer-range electronic contributions, elastic relaxation and any local information omitted by the seven labels. Three basis energies cannot determine seven independent ϵμ\epsilon_\mu. Nevertheless, Eq. (10) determines the target linear functional uniquely within this model:

e^∞=(4−β)EA1B0C3+3EA4B6C5+(β−2)EA7B8C12(4−β)NC,A1B0C3+3NC,A4B6C5+(β−2)NC,A7B8C12.(12)\hat{e}_{\infty} = \frac{(4-\beta)E_{\mathrm{A1B0C3}} + 3E_{\mathrm{A4B6C5}} + (\beta-2)E_{\mathrm{A7B8C12}}} {(4-\beta)N_{\mathrm{C,A1B0C3}} + 3N_{\mathrm{C,A4B6C5}} + (\beta-2)N_{\mathrm{C,A7B8C12}}}. \tag*{(12)}

The hats emphasize an energy estimate. Exact matching of counts does not set RjR_j to zero, and each chemical family requires its own three energies.

The A13B18C18\mathrm{A}_{13}\mathrm{B}_{18}\mathrm{C}_{18} cell is held out from the basis construction and obeys

nA13B18C18=nA1B0C3+3nA4B6C5,E^A13B18C18=EA1B0C3+3EA4B6C5.(13)\mathbf{n}_{\mathrm{A}_{13}\mathrm{B}_{18}\mathrm{C}_{18}}=\mathbf{n}_{\mathrm{A}_{1}\mathrm{B}_{0}\mathrm{C}_{3}}+3\mathbf{n}_{\mathrm{A}_{4}\mathrm{B}_{6}\mathrm{C}_{5}},\qquad\widehat{E}_{\mathrm{A}_{13}\mathrm{B}_{18}\mathrm{C}_{18}}=E_{\mathrm{A}_{1}\mathrm{B}_{0}\mathrm{C}_{3}}+3E_{\mathrm{A}_{4}\mathrm{B}_{6}\mathrm{C}_{5}}. \tag*{(13)}

Its actual DFT energy gives a directly interpretable validation residual δA13B18C18=(EA13B18C18−E^A13B18C18)/NC,A13B18C18\delta_{\mathrm{A}_{13}\mathrm{B}_{18}\mathrm{C}_{18}}=(E_{\mathrm{A}_{13}\mathrm{B}_{18}\mathrm{C}_{18}}-\widehat{E}_{\mathrm{A}_{13}\mathrm{B}_{18}\mathrm{C}_{18}})/N_{\mathrm{C},\mathrm{A}_{13}\mathrm{B}_{18}\mathrm{C}_{18}}. This tests transfer across one different periodic arrangement; it does not independently probe the A7B8C12\mathrm{A}_{7}\mathrm{B}_{8}\mathrm{C}_{12} direction or prove the accuracy of the infinite-limit estimate. The SI details this limitation and how to extend the validation if necessary.

Energy transfer from periodic structures to the bronze limit

The four families give bulk estimates of −9.037523-9.037523 eV/C for I-ene and −8.661320-8.661320, −8.661665-8.661665 and −8.684749-8.684749 eV/C for I-, II- and III-yne, respectively (Table 1). III-yne lies about 23 meV/C below the other two ethynylene networks on this scale. I-yne and II-yne differ by only 0.345 meV/C, less than the errors in their periodic transfer tests.

We tested the energy model at two levels (Figure 5 and Figure S14). For the 708-carbon A13B18C18\mathrm{A}_{13}\mathrm{B}_{18}\mathrm{C}_{18}-ene-I cell, the exact count identity in Eq. (13) gives −6399.179034-6399.179034 eV, compared with −6398.970251-6398.970251 eV from DFT, a residual of +0.295+0.295 meV/C. Two smaller I-ene cells with exact count identities in the extended first-shell catalogue give −0.121-0.121 and −0.219-0.219 meV/C. A7B8C12\mathrm{A}_{7}\mathrm{B}_{8}\mathrm{C}_{12} provides a more demanding test. Its seven environment counts span a third independent direction. Before using its relaxed energy in the bulk estimate, we predicted its energy from A1B0C3\mathrm{A}_{1}\mathrm{B}_{0}\mathrm{C}_{3} and A4B6C5\mathrm{A}_{4}\mathrm{B}_{6}\mathrm{C}_{5} alone, by projecting its environment frequencies onto the line between the two donors (SI). The four signed residuals run from −0.866-0.866 to +1.147+1.147 meV/C. These comparisons test a specific transfer prescription and do not bound the infinite-system error.

Figure 5. Periodic cell energies and the infinite-sheet estimate. In each panel the energy per carbon is measured relative to the infinite-sheet estimate e^∞\hat{e}_{\infty} for that family. The open circle at ∞\infty marks this estimate, whose absolute value is given above the panel. Filled circles show the original relaxed DFT energies, open triangles the first DFT energies of the assembled cells, and diamonds the two-donor predictions. The A7B8C12A_{7}B_{8}C_{12} prediction uses projected environment counts. The A13B18C18A_{13}B_{18}C_{18} prediction uses the exact count identity in Eq. (13). Symbols at the same composition are offset horizontally for clarity.

Figure S14. Energy transfer across periodic cells. Signed DFT minus predicted energy per carbon. a, Three exact environment-count identities for I-ene. The small cells use the extended first-shell catalogue. b, The four chemical decorations of A7B8C12 predicted from the two smaller donors using the same projection of their site frequencies. Values and totals are listed in Table S6.

Table S6: Signed transfer errors. Exact-count tests and projected tests use only donor energies in the prediction. DFT references are the original relaxed totals. The signed error is DFT minus predicted energy per carbon.

CellCount matchE^\widehat{E} (eV)EDFTE_{\mathrm{DFT}} (eV)δ\delta (meV/C)
A3B2C7-ene-Iexact-1697.939554-1697.962322-0.121
A6B10C6-ene-Iexact-2766.708013-2766.775138-0.219
A13B18C18-ene-Iexact-6399.179034-6398.970251+0.295
A7B8C12-ene-Iprojection-3632.698237-3632.449374+0.619
A7B8C12-yne-Iprojection-5509.428870-5509.674498-0.386
A7B8C12-yne-IIprojection-4954.953630-4955.449142-0.866
A7B8C12-yne-IIIprojection-5592.611684-5591.873110+1.147

Table S6.

We also tested the transfer of atomic positions in four periodic cells with 402–708 carbons, covering two directly bonded and two ethynylene-linked structures. VASP relaxations starting from the assembled geometries lower the first reported total energy by 0.016–0.042 meV/C. The root-mean-square atomic shifts are 0.00061–0.00241 Å after accounting for changes in the cell. The root-mean-square changes in actual C–C bond lengths, including cell deformation, are 0.00070–0.00113 Å. All four retain their complete periodic bond graphs (Figure S17). Figure 5 shows the first DFT energy of each assembled cell. The corresponding relaxation traces are given in Figure S17. The relaxed basis energies used in the linear model retain their original DFT references.

Figure S17. Geometric residuals of assembled periodic cells and G3 fragments. a, Internal atomic shifts after periodic unwrapping, removal of homogeneous in-plane deformation and mean translation. b, Actual C–C bond-length changes including cell deformation. Solid and open symbols give RMS and maximum values, respectively. Numbers on the axes identify the four periodic cells by their carbon count. c, Total energy relative to the last entry of the same relaxation. d, G3 RMS bond-length deviations from the fitted donor targets for internal and cross-sector bonds. Table S7 gives their counts. The paired periodic geometries are quantified in Table S8.

CellNCN_\mathrm{C}Atomic shift (Å)Bond change (Å)Area (%)Energy drop (meV/C)
RMSMax.RMSMax.
A7B8C12-ene-I4020.002410.005240.000750.00201+0.02730.0370
A7B8C12-yne-I6360.002250.006330.001130.00324+0.00640.0419
A7B8C12-yne-II5720.000610.002130.000880.00402+0.00390.0157
A13B18C18-ene-I7080.001260.004290.000700.00272+0.06440.0201

Table S8. Changes during relaxation from transferred geometries. Maxima are absolute values. The energy drop is the difference between first and last reported total energy per carbon of the same run.

Familye^∞\hat{e}_{\infty}E^\widehat{E}eDFTe_{\mathrm{DFT}}δ\deltaE^\widehat{E}eDFTe_{\mathrm{DFT}}δ\delta
A13B18C18\mathrm{A}_{13}\mathrm{B}_{18}\mathrm{C}_{18}: exact countsA7B8C12\mathrm{A}_{7}\mathrm{B}_{8}\mathrm{C}_{12}: projected counts
I-ene-9.037523-6399.1790-9.038094+0.295See Figure S14
I-yne-8.661320-9768.9785––-5509.4289-8.663010-0.386
II-yne-8.661665-8833.9241––-4954.9536-8.663373-0.866
III-yne-8.684749-10318.6311––-5592.6117-8.683033+1.147

Table 1. Bulk estimates and periodic energy tests for four carbon networks. The first block uses the exact A13B18C18\mathrm{A}_{13}\mathrm{B}_{18}\mathrm{C}_{18} count identity. The second uses the energy-independent two-donor projection for A7B8C12\mathrm{A}_{7}\mathrm{B}_{8}\mathrm{C}_{12}. e^∞\hat{e}_{\infty} and eDFTe_{\mathrm{DFT}} are in eV/C, E^\widehat{E} in eV/cell and δ=(EDFT−E^)/NC\delta=(E_{\mathrm{DFT}}-\widehat{E})/N_{\mathrm{C}} in meV/C. A dash denotes a large-cell DFT calculation not performed.

For the three A13B18C18\mathrm{A}_{13}\mathrm{B}_{18}\mathrm{C}_{18} yne sheets, Table 1 reports predictions from the exact count combination. Their electronic spectra use geometries assembled from relaxed donors. The energy estimates characterize relative energetics within this series. An assessment of dynamical or finite-temperature stability would require evidence beyond these total energies and local relaxation tests.

Periodic bands and states of open carbon patches

We used the distance-dependent, nonorthogonal carbon pzp_z model of gt-TB[19, 20] for the periodic bands, total π\pi density of states (DOS) and finite-fragment levels. Thirteen periodic geometries are DFT-relaxed. The other three are the assembled A13B18C18 yne geometries. For each cell, the band path and the Brillouin-zone DOS share one energy zero. We integrate over a two-dimensional triangular mesh without Gaussian broadening. On the combined path and mesh, A13B18C18-ene-I has a 654.2 meV separation and the III-yne analogue has a 113.6 meV separation. I-yne shows a 17.4 meV indirect overlap. For II-yne the mesh separation falls from 19.8 to 2.4 meV on refinement, leaving its classification sensitive to sampling. Figure S8–Figure S11 and the SI sampling table identify these differences for all sixteen cells. The one-orbital model probes the out-of-plane π\pi sector.

Figure S8. I-ene periodic bands and DOS. All four underlying carbon geometries are relaxed.

Figure S11. III-yne periodic bands and DOS. The large cell uses transferred coordinates. In Figure S8–Figure S11 each cell uses its own neutral reference and the same tight-binding model. All DOS curves are spin summed in states per eV per carbon.

All four G3 fragments use the same 943-site sequence, A235_{235}B324_{324}C384_{384}. We fit the carbon coordinates in one 60° sector to local distances from the three relaxed periodic basis cells of the same family. The other five sectors follow by rotation, with bonds across their boundaries included throughout the fit (Figure S16). The resulting planar coordinates recover every prescribed bond. The finite-fragment spectra below use these sector-fitted coordinates.

Sixfold sector assembly diagrams: a Choose an ABC sector; b Fit donor distances; c Join rotated sectors; d I-ene; e I-yne; f II-yne; g III-yne. Labels include 5 nm, Central A + 6 × (39 A, 54 B, 64 C), A1B0C3 · A4B6C5 · A7B8C12, Bond and neighbour-pair distances, $r_i^{P(k)} = R_{60}^{k} \cdot r_i$, Six copies, including cross-seam bonds, Independent sector, Rotated copies, Cross-seam bonds, 13,950 C atoms · 294 seam bonds, 21,774 C atoms · 306 seam bonds, 19,590 C atoms · 282 seam bonds, and 22,140 C atoms · 288 seam bonds

Figure S16. Sixfold sector assembly on the complete G3 sequence. a, The circled central A site is shared. The coloured sector adds 39 A, 54 B and 64 C sites. b, Independent carbon positions for I-ene. Within each family, relaxed A1B0C3, A4B6C5 and A7B8C12 cells supply both bond lengths and distances between neighbours of a common carbon. c, The I-ene region boxed in d. The fit includes bonds joining adjacent sectors under the 60° rotation, as in Eq. (27). d–g, The complete I-ene, I-yne, II-yne and III-yne carbon bond graphs, drawn to the common 5 nm scale bar in d. The arrow marks a 60° rotation. The highlighted sector contains all independent carbon coordinates. Each count of seam bonds covers all six boundaries.

The four complete G3 fragments have HOMO–LUMO spacings of 2.346, 0.069, 3.408 and 5.761 meV for I-ene, I-yne, II-yne and III-yne, respectively (Figure 6). We define the boundary shell as all atoms within two carbon bonds of an undercoordinated atom. Among the complete energy groups in the 28-level frontier window, excluding its endpoint groups, the highest shell weights are 79.05%, 19.41%, 10.42% and 25.66%, in the same order. The corresponding shells contain 7.96%, 6.14%, 6.22% and 5.80% of the carbon atoms.

Figure 6. Periodic spectra and boundary weights in the sixfold G3 fragments. Rows show the four chemical families. The first column gives A13_{13}B18_{18}C18_{18} π\pi bands and spin-summed DOS in states per eV per carbon. The second plots 28 G3 energies relative to the neutral midpoint, against orbital index relative to the HOMO (index 0). Colour gives the inverse participation ratio of each solver eigenvector and Δ\Delta is the HOMO–LUMO spacing. The last two columns show the LUMO group and the complete interior-window group with the largest boundary weight on the same fragment. Percentages are populations within two bonds of an undercoordinated carbon. The energies below the maps use the fragment midpoint. The colour scale gives the mean atomic population divided by the uniform value 1/NC1/N_{\mathrm{C}}.

I-ene separates boundary enrichment from the assignment of the LUMO. Its LUMO doublet has only 0.124% of its population in the shell. A higher doublet at +239.81 meV from the neutral HOMO–LUMO midpoint carries the 79.05% shell weight and extends along the six sides. On the same carbon graph, a fit without the rotation constraint gives a LUMO localized mainly on one edge, with 72.33% shell weight. The root-mean-square change in atomic positions between the fits is only 0.0176 Å. A second effect concerns how a doublet is displayed. An individual real eigenvector can give unequal weights in the six sectors even for the exactly symmetric structure. The population averaged over the complete LUMO doublet recovers sixfold symmetry (Figure S18). These results concern the carbon-only termination and the specified π\pi Hamiltonian.

Figure S18. Single-state and group LUMO populations on sixfold G3 fragments. Each row uses the same sector-fitted coordinates in both columns. Left, the atomic population of one LUMO eigenvector. Right, the mean population of the full LUMO group. The doublets in I-ene, II-yne and III-yne recover sixfold symmetry upon averaging. For the isolated I-yne LUMO, both columns depict the same state. The labels give the state count and the mismatch D60D_{60} under a 60∘60^\circ rotation. All panels use a common population scale. Table S11 compares the unconstrained and sector-fitted geometries.

Discussion

The most restrictive choice appears at the scale of three neighbouring sites. A B triangle can be coloured quasiperiodically as part of an ordered infinite field, yet it prevents the alternating carbon ports from closing. The bronze hierarchy supplies the compatible seven-environment catalogue for the carbon networks studied here. Its local catalogue has two roles: it constrains which molecular assemblies are permitted, and it defines an explicit energy approximation that can be challenged by a held-out calculation. The exact count identity avoids fitting an underdetermined set of seven environment energies; it does not remove the need to test electronic and elastic nonlocality.

The four selected networks isolate two chemical choices: nonhexagonal versus benzenoid cores, and direct versus ethynylene connections. The reduction of II-ene and III-ene to graphene is itself instructive: an aperiodic partition of identical atoms does not ensure an aperiodic observable network. The decoration must retain a physical record of the code. Establishing that record in relaxed geometry, and identifying an electronic response that depends on its hierarchy, are the decisive next tests. The periodic basis also supplies local distances for finite fragments. Building the rotation into that fit makes it possible to distinguish the geometry sensitivity of a frontier orbital from the basis freedom within a degenerate pair.

Methods and data availability

We preoptimized the original carbon-network geometries with RG2^{2}[21], then relaxed the periodic reference structures in VASP[22]. In the geometry-transfer tests, the starting positions came from the relaxed donors of the same chemical family. The SI gives the VASP settings recorded for these tests and the gt-TB parameters used in the spectral calculations[19, 20]. The accompanying files include the integer constructions and certificates, indexed carbon structures, cell energies and relaxation traces, periodic eigenvalues, DOS integration and open-patch eigenstate populations.

Golden, silver and bronze colour fields

Use integer coordinates (i,j)(i,j) on 60-degree axes, and take the norm ρ=max⁡(∣i∣,∣j∣,∣i+j∣)\rho=\max(\lvert i\rvert,\lvert j\rvert,\lvert i+j\rvert). Write H(r)={ρ≤r}H(r)=\{\rho\le r\}. The common rule in the main text uses m=1,2,3m=1,2,3, with (p,q)↦(q,mq+p)(p,q)\mapsto(q,mq+p). For the gold and silver branches all sites are eventually candidates. Gold coverage follows by induction. The base contains H(2)H(2) after two steps. If the current patch contains H(p)H(p) and the next pair is (p,q)(p,q), take x≥y≥0x\ge y\ge0 by symmetry and p<x+y≤qp<x+y\le q. Subtract (q−p,0)(q-p,0). Since q≤2pq\le2p, the result is in H(p)H(p). The axial copies and the original patch cover H(q)H(q).

For silver, four steps cover H(28)H(28) and the next pair is (29,70)(29,70). A three-step certificate propagates H(0.9p)H(0.9p) to H(0.9(2p+5q))H(0.9(2p+5q)). Normalize p=1p=1. The ratio remains in [70/29,169/70][70/29,169/70] under t↦2+1/tt\mapsto2+1/t. The certificate enumerates 2,893 possible translation coefficient quadruples and 64,516 grid witnesses in one symmetry sector at spacing 1/401/40. The maximum distance to a legal translated centre on that grid is at most 224/280224/280. Adding the gridding error 2/402/40 and the parameter error 11(169/70−70/29)11(169/70-70/29) gives 3473/4060<0.93473/4060<0.9. Subtracting the chosen centre from any integer target therefore gives an integer point in the smaller patch. The exact integer checks are in code/metallic/certify_candidates.py. The following sections give the separate bronze certificate.

For gold and silver the A condition reduces to

max⁡(∥id∥,∥jd∥,∥(i+j)d∥)<d/2\max(\lVert i d\rVert,\lVert j d\rVert,\lVert(i+j)d\rVert)<d/2

where ∥⋅∥\lVert\cdot\rVert denotes distance to an integer, with d=1/φ2d=1/\varphi^2 and 2−1\sqrt{2}-1, respectively. The phase pair (id,jd) mod 1(i d,j d)\bmod1 samples a two-torus uniformly. The intersection of the three selecting strips has area 3d2/43d^2/4, the irrational A density. A period would give an independent period under a 60-degree rotation and force rational density. The orbit misses all window boundaries since dd is irrational.

Each finite patch therefore occupies an open set in phase space and recurs with bounded gaps by compactness. Integer scales (ph,qh)(p_h,q_h) yield small phase errors and repeated finite patches. The exact raw-copy recursion and the recurrence of the final gold and silver colour fields are distinct statements.

A site’s six-neighbour word is determined by a radius-two A patch. Partitioning the phase torus along all translated boundaries of that patch gives the complete finite list and exact areas in code/metallic/new_environments.csv (Figure S15). Each seven-site wheel has twelve internal edges. Enumerating all rotations of the three port sequences checks all twelve edges simultaneously. Complementing every port as in alphabet III preserves equality of matching ports. For the stated assignment only five of eight golden wheels and six of nine silver wheels pass. Global decoration is excluded by any failed wheel. The B triangle in the main text gives an explicit obstruction; it occurs inside the all-B wheel. Trying all six global reassignments of the colours to the motifs yields a failing wheel in every case (ports_all_assignments.csv).

Figure S15. Golden and silver nearest-neighbour catalogues. Each percentage is per lattice site in the infinite field. Rotations and reflections of the six neighbours are identified.

Definitions, scale parameters and finite supports

We distinguish the integer recursion level hh, the finite carbon-support label G1/G2/G3, and the periodic-cell index. Periodic structures are named by their molecular composition, linkage and alphabet, for example A13B18C18-ene-I. The holdout contains 49 molecular sites. The precise site lists, orientations and matrices are retained in the accompanying JSON files.

The bronze number β=(3+13)/2\beta= (3+\sqrt{13})/2 is the asymptotic recursion ratio. The geometric length ratio (3+39)/6≃1.32951(\sqrt{3}+\sqrt{39})/6 \simeq1.32951 associated with the parent bronze construction[5] is a different quantity. A chemically chosen ratio, such as the earlier ethynylene embedding value near 1.65425, is also not the bronze inflation factor. Integer colouring, parent geometric embedding and relaxed chemical distances must be reported separately.

The common finite supports used for all four candidates are listed in Table S1. They are complete molecular-block supports extracted from the common archived hierarchy. A raw finite set ShS_h of A digits is not itself the GhG_h carbon molecule. For reproducibility, the present generation convention is defined by the supplied site lists; changes to boundary pruning constitute a different finite sample, even if the same interior colour field is used. Earlier I-only files used a differently truncated atomic

SupportABCI-eneI-yneII-yneIII-yne
G1106126162138120
G21936301254190217101908
G323532438413950217741959022410

Table S1. Common finite supports and explicit carbon counts before optional H capping.

boundary and had carbon counts 72/1104/13296 (ene) and 108/1740/21072 (yne). These should not be mixed with the matched-support series in Table S1. All four G3 calculations here use the complete support of Table S1 and its original carbon connectivity. Optional H-capped structures are controls for termination effects, not alternative bulk compositions.

Field and statements

Let U={(1,0),(0,1),(−1,1),(−1,0),(0,−1),(1,−1)}U = \{(1,0),(0,1),(-1,1),(-1,0),(0,-1),(1,-1)\}, in cyclic order. Put ρ(i,j)=max⁡(∣i∣,∣j∣,∣i+j∣)\rho(i,j) = \max(|i|,|j|,|i+j|) and

p0=1,q0=3,ph+1=qh,qh+1=3qh+ph.p_0 = 1,\qquad q_0 = 3,\qquad p_{h+1} = q_h,\qquad q_{h+1} = 3q_h + p_h.

With indices on UU understood modulo six, define

Dh={0}∪{(qh−ph)uk}∪{qhuk+phuk±1},S0={0},Sh+1=Sh+Dh,S∞=⋃hSh.D_h = \{0\}\cup\{(q_h-p_h)u_k\}\cup\{q_hu_k+p_hu_{k\pm1}\},\qquad S_0 = \{0\},\qquad S_{h+1} = S_h+D_h,\qquad S_\infty= \bigcup_h S_h.

The colour of x∈Z2x \in\mathbb{Z}^2 is A when x∈S∞x \in S_{\infty}; otherwise it is C when x−u,x+u∈S∞x-u, x+u \in S_{\infty} for at least one u∈Uu \in U, and B otherwise. Thus A takes priority. All sums are sets, with duplicates removed.

A first-shell environment records the centre and the cyclic word of its six neighbours, up to rotations and reflections. This is distinct from a pair interface, which records only the colours at the ends of one edge.

Theorem 1. The field has exactly the seven first-shell environments in Table S2. Their frequencies, defined by counting centres in expanding hexagonal lattice windows, are the tabulated values. The same limits hold in translated large hexagonal windows and ordinary planar windows whose boundary contribution vanishes relative to their area. Consequently, the molecular-site fractions are

(fA,fB,fC)=14+13(2,13−1,3).(f_A,f_B,f_C)=\frac{1}{4+\sqrt{13}}(2,\sqrt{13}-1,3).
EnvironmentExact frequencyPercentage
A:BBBBCC6/D6/D7.23206643
A:BBBCCC6(β−1)/D6(\beta-1)/D16.65382639
A:CCCCCC2/D2/D2.41068881
B:ABABAB2(β+1)/D2(\beta+1)/D10.37265309
B:ABACBC6β/D6\beta/D23.88589282
C:ABBACC6β/D6\beta/D23.88589282
C:ACCACC3(β+1)/D3(\beta+1)/D15.55897963

Table S2. Exact frequencies. Here β=(3+13)/2\beta=(3+\sqrt{13})/2 and D=23β+7D=23\beta+7. The denominator is the total number of molecular lattice sites, not the number of atoms.

Finite access to the infinite field

Let Rh=∑k<h(pk+qk)R_h=\sum_{k<h}(p_k+q_k). Every sum of digits below level hh has norm at most RhR_h, and induction gives Rh<2phR_h<2p_h. A sum whose highest nonzero digit is at level hh has norm at least

Hh=qh−ph−Rh,H0=2,Hh+1=Hh+ph.H_h=q_h-p_h-R_h,\qquad H_0=2,\qquad H_{h+1}=H_h+p_h.

These inequalities are integer bounds and do not assume uniqueness of digit expansions.

For the square in integer coordinates Wh=[0,qh−ph)2∩Z2W_h=[0,q_h-p_h)^2\cap\mathbb{Z}^2, all A sites needed to decode the first shells have norm at most 2(qh−ph)2(q_h-p_h). The square is a parallelogram in the triangular lattice. Higher digits beyond h+2h+2 cannot contribute, since

Hh+3=5qh+ph−Rh>5qh−ph>2(qh−ph).H_{h+3}=5q_h+p_h-R_h>5q_h-p_h>2(q_h-p_h).

Hence a three-level zero-origin guard contains every required high digit.

Rectangular subdivision and the collar

Use three interval lengths

LX(h)=qh−ph,LY(h)=3ph,LZ(h)=qh+2ph.L_X(h)=q_h-p_h,\qquad L_Y(h)=3p_h,\qquad L_Z(h)=q_h+2p_h.

The integer identities give the substitutions

X⟶XYX,Y⟶XZX,Z⟶XZXZX.X\longrightarrow XYX,\qquad Y\longrightarrow XZX,\qquad Z\longrightarrow XZXZX.

Take Cartesian products of these interval subdivisions. Their purpose here is to partition the lattice into rectangles in integer coordinates; no assumption that the two-dimensional colour is a product of one-dimensional words is made.

A state is (Tx,Ty,S)(T_x,T_y,S), where each (a,b,c,d)∈S(a,b,c,d) \in S denotes a processed high-digit sum (aqh+bph,cqh+dph)(a q_h + b p_h, c q_h + d p_h) relative to the rectangle origin. The digit coefficient set is

D={(0,0,0,0)}∪{(x,−x,y,−y):(x,y)∈U}∪{(x,v,y,w):(v,w) adjacent to (x,y) in U}.D = \{(0,0,0,0)\} \cup\{(x,-x,y,-y) : (x,y) \in U\} \cup\{(x,v,y,w) : (v,w)\text{ adjacent to }(x,y)\text{ in }U\}.

On descending one level, with child offsets Qxqh+PxphQ_xq_h + P_xp_h, Qyqh+PyphQ_yq_h + P_yp_h, update by

(a,b,c,d)↦(3a+b+e−Qx, a+f−Px, 3c+d+g−Qy, c+k−Py)(a,b,c,d) \mapsto(3a+b+e-Q_x,\ a+f-P_x,\ 3c+d+g-Q_y,\ c+k-P_y)

for every (e,f,g,k)∈D(e,f,g,k) \in D.

An environment at a centre requires A membership out to two lattice rings: one ring to access its neighbours and another for the C midpoint test. Unprocessed lower digits and these two rings require at most Rh+2<2ph+2≤4phR_h + 2 < 2p_h + 2 \le4p_h in each coordinate. Therefore retain only a conservative 4ph4p_h collar around the current rectangle.

This retention test is performed exactly for r=qh/ph∈[3,10/3]r=q_h/p_h \in[3,10/3]. If LT(h)/ph=ur+vL_T(h)/p_h=ur+v, discard a coordinate ar+bar+b only if it is below −4-4 at both endpoints, or if (a−u)r+(b−v)(a-u)r+(b-v) exceeds 44 at both endpoints. A linear function cannot cross the retained interval without satisfying at least one of these endpoint checks. The test may keep unnecessary digits, but cannot discard a digit needed by the rectangle. Every retained digit remains an actual digit sum, so extra retention cannot introduce spurious A sites.

Starting from zero and applying three zero-offset X–X guard steps, breadth-first closure under all child rectangles gives 301 states:

Tx\TyT_x \backslash T_yXYZ
X814236
Y422116
Z361611

Table 1 (PDF p. 16).

The accompanying JSON lists every quadruple of every state and every transition. The verifier reconstructs all of them from the equations. At h=0h=0 the side lengths are 2, 3, 5 and each quadruple becomes (3a+b,3c+d)(3a+b,3c+d). Decoding each base rectangle produces exclusively the seven environments in Table S2.

By induction, closure is valid at every depth. The growing root squares cover the nonnegative coordinate sector, and the sixfold symmetry of the digits and colour test covers the entire plane. Thus there is no eighth first-shell environment. Every listed environment occurs in a decoded state reachable from the root, so the list contains exactly seven types.

Frequencies and exact algebra

Let MijM_{ij} count children of state ii of type jj, and let OiμO_{i\mu} count environment μ\mu in the base rectangle of state ii. Then MhOM^hO gives all seven counts at depth hh. The state graph is strongly connected, and 16 states have self-loops. Thus the nonnegative matrix MM is primitive.

Write ℓX=β−1\ell_X=\beta-1, ℓY=3\ell_Y=3, ℓZ=β+2\ell_Z=\beta+2. The positive vector vi=ℓTxℓTyv_i=\ell_{T_x}\ell_{T_y} satisfies Mv=β2vMv=\beta^2v by the product interval subdivision. The Perron eigenvalue is therefore λ=β2=(11+313)/2\lambda=\beta^2=(11+3\sqrt{13})/2. Primitivity gives a common environment-frequency limit for all states.

For a compact exact computation of that limit, the verifier checks the following integer identity on all 301 × 7 output entries:

M3(M2−11M+I)(M2−3M−I)(M2−I)O=0.M^3(M^2-11M+I)(M^2-3M-I)(M^2-I)O=0.

No fitted recurrence or rounded eigenvector is used. With λ−=(11−313)/2\lambda_-=(11-3\sqrt{13})/2, set

Q(x)=x3(x−λ−)(x2−3x−1)(x2−1).Q(x)=x^3(x-\lambda_-)(x^2-3x-1)(x^2-1).

All roots of the displayed annihilating polynomial other than λ\lambda have modulus smaller than λ\lambda. Applying Q(M)Q(M) isolates the dominant contribution to the seven output vectors. Its root-state row, normalized by its sum, simplifies exactly to

123β+7(6, 6(β−1), 2, 2(β+1), 6β, 6β, 3(β+1)).\frac{1}{23\beta+7}\left(6,\,6(\beta-1),\,2,\,2(\beta+1),\,6\beta,\,6\beta,\,3(\beta+1)\right).

The supplied SymPy checks verify these identities in Q(13)\mathbb{Q}(\sqrt{13}).

To transfer this result from superrectangles to large windows, fix a subdivision level hh. All level-hh rectangle diameters are bounded by a constant times qhq_h. Partition a sufficiently large root square down to this level. Rectangles meeting the boundary of a large hexagon contribute only a strip of this fixed width, whose fraction vanishes as the hexagon grows. Every interior rectangle has, uniformly over the finite state set, the same limiting frequency vector as hh grows. First increase the window size, then increase hh. Apply the same argument sector by sector; sector-boundary strips also have vanishing density. This establishes the stated planar frequencies, including translated windows.

Pair interfaces and finite samples

There are five nonzero undirected colour-pair interfaces: AB, AC, BB, BC and CC. AA is absent. If f1,…,f7f_1,\ldots,f_7 follow Table S2, counting each edge once and using 3N3N edges for NN bulk triangular-lattice sites gives

gAB=(4f1+3f2)/3=fA,gAC=(2f1+3f2+6f3)/3=fA,gBB=(3f4+2f5)/6=fA/2,gBC=2f5/3,gCC=(2f6+4f7)/6.\begin{aligned} g_{AB} &= (4f_1+3f_2)/3=f_A,\qquad&g_{AC} &= (2f_1+3f_2+6f_3)/3=f_A,\\ g_{BB} &= (3f_4+2f_5)/6=f_A/2,\qquad&g_{BC} &= 2f_5/3,\\ g_{CC} &= (2f_6+4f_7)/6. \end{aligned}

Their percentages are respectively 26.2966, 26.2966, 13.1483, 15.9239, and 18.3346. These identities are independent of whether a particular chemical family resolves additional port multiplicities or orientation classes; those extra chemical distinctions require their own labels.

The common complete-ABC G3 support contains 235 A, 324 B and 384 C units. Its finite fractions differ from the bulk limits. Direct finite-window statistics in the package count all centres with their full neighbours supplied by a halo, avoiding artificial open-boundary environments. The radius-6000 window has 108018001 sites and yields (0.2629509039, 0.3425589037, 0.3944901924), consistent with the exact limit but not used to prove it. Direct and recursively counted root rectangles were also checked independently through side length 2738, with exact agreement.

All four retained chemical networks sharing this colouring have the same molecular-site frequencies. Atomic fractions, relaxed energies, termination counts, and graph changes caused by reconstruction are separate quantities.

Axis certificate and absence of planar translations

The interval lengths LX=q−pL_X=q-p, LY=3pL_Y=3p, LZ=q+2pL_Z=q+2p obey X→XYXX\to XYX, Y→XZXY\to XZX, Z→XZXZXZ\to XZXZX on descending one level. The one-dimensional restriction is verified with the accompanying nine-state exact axis program. Its states retain the transverse A sources required to decide whether a site is C; consequently, this is not an arbitrary one-dimensional rule imposed on a two-dimensional pattern. At the base level, every state of type X, Y or Z decodes respectively to AC, ABB or ABBBB.

With columns denoting the substituted parent, the interval incidence matrix is

M1=(223100012).(14)M_1=\begin{pmatrix} 2 & 2 & 3\\ 1 & 0 & 0\\ 0 & 1 & 2 \end{pmatrix}. \tag*{(14)}

It is primitive with Perron eigenvalue β\beta. If the interval densities are proportional to (x,y,z)(x,y,z), then x=βyx=\beta y and y=(β−2)zy=(\beta-2)z. Since each base word has one A and lengths 2, 3, 5, the axis A density is

x+y+z2x+3y+5z=2β5β+1.(15)\frac{x+y+z}{2x+3y+5z}=\frac{2\beta}{5\beta+1}. \tag*{(15)}

This is irrational: a rational value rr would imply (5r−2)β=−r(5r-2)\beta=-r, impossible for irrational β\beta. A periodic word has a rational letter density, so the axis restriction is not periodic.

The full colour field is invariant under 60∘60^\circ rotation R(a,b)=(−b,a+b)R(a,b)=(-b,a+b), because its digit sets and local midpoint rule are invariant. If a nonzero t=(a,b)t=(a,b) were a translation period, so would RtRt and every integer combination of them. In particular,

(a+b)t−bRt=(a2+ab+b2,0)(16)(a+b)t-bRt=(a^2+ab+b^2,0) \tag*{(16)}

would be a nonzero horizontal period, contradicting the axis result. Thus the field admits no nonzero planar translation. This argument excludes even a single translation period, rather than merely excluding a two-dimensional lattice of periods.

Growing collars and recurrence of arbitrary finite patches

Primitivity of a local counting matrix by itself would not prove recurrence of arbitrarily large patches. Here the rectangle states retain more information: the same retained A sources determine all colours in a collar whose physical width grows with level.

At level hh, put δh=2ph−1\delta_h=2p_h-1. Consider a state rectangle enlarged by δh\delta_h in each integer coordinate. To colour any point in this enlarged rectangle requires its own A membership and that of its nearest neighbours. The maximum lower-digit displacement is Rh<2phR_h<2p_h, and

Rh+δh+1<4ph.(17)R_h+\delta_h+1<4p_h. \tag*{(17)}

Therefore the conservative 4ph4p_h source collar used by the certificate suffices to determine the entire enlarged coloured rectangle. During a descent, the child rectangle lies in its parent and δh\delta_h decreases; a source pruned at an ancestor cannot affect this smaller target. This proves the growing-collar property by induction.

The three root guard steps also suffice for this larger target. The A sources needed for the enlarged X–X rectangle have norm bounded by 2(qh−ph)+2δh+22(q_h-p_h)+2\delta_h+2, whereas

Hh+3=5qh+ph−Rh>5qh−ph>2(qh−ph)+2δh+2.(18)H_{h+3}=5q_h+p_h-R_h>5q_h-p_h>2(q_h-p_h)+2\delta_h+2. \tag*{(18)}

Here qh≥3phq_h\ge3p_h. Consequently a root state at level hh contains the same origin-centred coloured ball of radius δh\delta_h as the infinite field, and δh→∞\delta_h\to\infty.

The verified transition graph is strongly connected, the root has a self-loop, and every state reaches the root in at most three descents. Padding with the root self-loop gives a root descendant after exactly three descents for every state. These finite statements are checked in code/verify_recurrence.py.

Fix any finite patch of the original field and choose an origin-centred ball containing it. Choose hh so that this ball lies within the root’s δh\delta_h collar. Every level-(h+3)(h+3) state rectangle then contains a root copy at level hh and hence a translated copy of the patch. Rectangle sizes at this fixed level are bounded, so the gaps between copies are bounded.

Growing root squares cover the nonnegative coordinate sector; sixfold rotations cover the plane. The origin-centred colour ball is itself sixfold invariant, so rotated root copies contain translated copies of the same ball. Sector boundaries do not create unbounded gaps. Thus every finite coloured patch recurs relatively densely: the field is uniformly recurrent and aperiodic.

As an additional finite check, all 301 states were compared against an independently generated field throughout collars of widths 1, 5 and 19 at levels 0, 1 and 2, with 1,556,082 cumulative point comparisons and no mismatch. This numerical check corroborates the induction but does not replace it. The graph and frequency proofs are reproducible from integer data supplied with this manuscript.

What is and is not proved. The results establish a well-defined, aperiodic and uniformly recurrent real-space hierarchy with exact local frequencies. We use “quasiperiodic code” in this structural sense. Pure-point dynamical or diffraction spectrum is a stronger mathematical property [23, 24]. No theorem asserting it for the decorated or relaxed atomic sheets is supplied here. A finite diffraction image, if later added, should be labelled a finite-size diagnostic rather than a proof of that spectral property.

Molecular alphabets, ports and carbon counting

Table S3 records the fragments before assembly. Port strings are read cyclically in the archived local frame; rotation changes their displayed starting direction. The B cores have odd neutral electron counts when capped as shown. Calling them fragments avoids implying that all capped motifs have been synthesized or are stable closed-shell reagents.

AlphabetLetterCapped fragmentnnPort stringPP
IABenzene, C6H6\mathrm{C}_{6}\mathrm{H}_{6}61111116
IBPentagon-fused, C15H9\mathrm{C}_{15}\mathrm{H}_{9}151212129
ICPentagon-fused, C20H10\mathrm{C}_{20}\mathrm{H}_{10}2012212210
IIABenzene, C6H6\mathrm{C}_{6}\mathrm{H}_{6}61111116
IIBPhenalenyl, C13H9\mathrm{C}_{13}\mathrm{H}_{9}131212129
IICPyrene, C16H10\mathrm{C}_{16}\mathrm{H}_{10}1612212210
IIIACoronene, C24H12\mathrm{C}_{24}\mathrm{H}_{12}2422222212
IIIBPhenalenyl, C13H9\mathrm{C}_{13}\mathrm{H}_{9}132121219
IIICNaphthalene, C10H8\mathrm{C}_{10}\mathrm{H}_{8}102112118

Table S3. Three molecular alphabets. nn is the number of core carbon atoms; PP is the number of external terminal valences.

Let LL count matched terminal pairs. A periodic ene cell has NC=∑snsNsN_C = \sum_s n_sN_s, and a yne cell has NC=∑snsNs+2LN_C = \sum_s n_sN_s + 2L. In a fully closed periodic network, 2L=∑sPsNs2L = \sum_s P_sN_s, so the yne coefficients are simply ns+Psn_s + P_s. This derives the four carbon-count formulas in the main text. It also shows why one cannot count only coarse triangular edges: some edges carry two atomic connections. For an open finite patch, LL must be counted explicitly and any remaining valences treated by a declared termination convention.

In I-yne the limiting carbon atoms per molecular site equal 16+21316+2\sqrt{13}; for I-ene they equal 11+1311+\sqrt{13}. For II-yne and III-yne they are respectively (80+2213)/(4+13)(80 + 22\sqrt{13})/(4 + \sqrt{13}) and (104+2213)/(4+13)(104 + 22\sqrt{13})/(4 + \sqrt{13}). These are atom-count normalizations, not independent concentration variables.

Why II-ene and III-ene are not retained

The direct benzenoid assemblies were reconstructed on all four selected periodic supports. At the unrelaxed ideal geometry, enumeration of the translations permuting the carbon sites with a Cartesian tolerance of 10−510^{-5} Å gives two carbon atoms for every cell (Table S4). The reconstructed bond-vector residuals are below 10−810^{-8} Å. These checks establish that the selected direct assemblies are graphene supercells: their A/B/C boundaries are a partition of the honeycomb network, not a distinct carbon topology. The molecular code becomes physically visible again when the connecting bonds are replaced with ethynylene links. Figure S4 illustrates the difference.

AssemblyA1B0C3A4B6C5A7B8C12A13B18C18
II-ene carbon count54182338600
III-ene carbon count54224392726
Primitive carbon count, both2222

Table S4. Direct-assembly checks. All eight ideal structures reduce to a two-carbon graphene primitive cell. These are geometric checks, not DFT relaxations.

Graphene recovered by direct benzenoid assembly

Figure S4. Graphene recovered by direct benzenoid assembly. Representative II-ene and III-ene cells reduce to ordinary graphene. Inserting ethynylene connections retains the molecular partition in II-yne and III-yne. The direct assemblies are drawn in a single colour. The yne panels retain the construction-block colours.

Periodic-cell generation and seam eligibility

For the periodic-colouring route, a nonsingular integer matrix TT defines a triangular supercell with N=∣det⁡T∣N = |\det T| molecular sites. Periodic representatives are assigned letters and orientations; neighbours are found modulo TT. A candidate must satisfy all port matches, geometric assembly checks and the chosen local-environment criterion. The archived catalogue contains 118 accepted construction records from the earlier small-supercell search, plus five records cut from G3. The present work does not claim that this 123-record archive enumerates all possible cells or all possible larger-period colourings.

For the cut route, retain the letters and orientations already present in G3 and wrap the selected window by its two translation vectors. Recompute every first shell using periodic neighbours, including sites on the seam. The accepted A13B18C18 window contains 49 sites and begins at (−9,−2)(-9,-2) in integer coordinates; a parallelogram fundamental domain can represent the same hexagonal Bravais superlattice. The illustration in Figure S7 shows this fundamental domain rather than implying a recolouring operation. Source site lists and matrices are authoritative for reproduction.

Figure S7. A cut must pass its periodic seams. The accepted A13B18C18 fundamental window lies in the already coloured G3 support. Its periodic first shells all belong to the seven-type set. The A13B20C15 cut has nine disallowed centres and is excluded from this energy model.

Eligibility for the seven-environment energy model requires

Ej⊆E∞,E∞={μ1,…,μ7},(19)\mathcal{E}_j \subseteq\mathcal{E}_{\infty}, \qquad\mathcal{E}_{\infty} = \{\mu_1,\ldots,\mu_7\}, \tag*{(19)}

where the seven labels are listed in Table S2. Having fewer than seven types is allowed. A periodic environment outside this set is disqualifying for the present basis, even if the atomic assembly is chemically admissible. The seven passing records comprise the four compositions used in the main text, translated copies of A1B0C3 and A7B8C12, and a threefold repetition of A1B0C3 with composition A3B0C9. These duplicates do not increase the descriptor rank. A13B20C15 is excluded because it contains six A:BBBBBC and three C:ABBABB centres.

Exact basis algebra and identifiability

With the environment order used in the main text, the count matrix is

X=(001000322024410612666661612126),(20)X = \begin{pmatrix} 0 & 0 & 1 & 0 & 0 & 0 & 3 \\ 2 & 2 & 0 & 2 & 4 & 4 & 1 \\ 0 & 6 & 1 & 2 & 6 & 6 & 6 \\ 6 & 6 & 1 & 6 & 12 & 12 & 6 \end{pmatrix}, \tag*{(20)}

whose rows are A1B0C3, A4B6C5, A7B8C12 and A13B18C18. Its rank is three. The first three rows contain 4, 15 and 27 molecular sites; the last contains 49. Put D=23β+7D = 23\beta+ 7. Direct substitution gives

Df∞=(4−β)X1+3X2+(β−2)X3,X4=X1+3X2.(21)D f_{\infty} = (4-\beta)X_1 + 3X_2 + (\beta-2)X_3, \qquad X_4 = X_1 + 3X_2. \tag*{(21)}

The nonnegative molecular-site weights are

w=(4(4−β),45,27(β−2))D,∑jwj=1.(22)\mathbf{w} = \frac{\left(4(4-\beta),45,27(\beta-2)\right)}{D}, \qquad\sum_j w_j = 1. \tag*{(22)}

For an energy per carbon atom, the corresponding weights of the three per-carbon energies would be

w~j=ajNC,j∑kakNC,k,a=(4−β,3,β−2).(23)\widetilde{w}_j = \frac{a_jN_{\mathrm{C},j}}{\sum_k a_kN_{\mathrm{C},k}}, \qquad\mathbf{a} = (4-\beta,3,\beta-2). \tag*{(23)}

They depend on the chemical family. Using w\mathbf{w} directly on per-carbon energies generally gives the wrong result.

An alternative expression is E=∑sNsηs+∑μnμJμE=\sum_s N_s\eta_s+\sum_\mu n_\mu J_\mu for molecular and interface contributions. Since Ns=∑μ: centre(μ)=snμN_s=\sum_{\mu:\,\mathrm{centre}(\mu)=s}n_\mu, the ten parameters are redundant. They can be absorbed into seven effective ϵμ=ηcentre(μ)+Jμ\epsilon_\mu=\eta_{\mathrm{centre}(\mu)}+J_\mu, which are still underdetermined by the three basis energies. No unique set of seven effective energies should be reported from these inputs. The target is nevertheless identifiable because its descriptor lies in the row span of the basis.

If Ej=Xjϵ+RjE_j=X_j\boldsymbol{\epsilon}+\mathcal{R}_j, the error in the infinite per-carbon estimate is

e^∞−e∞=∑j=13ajRjDν∞−r∞ν∞,(24)\widehat{e}_{\infty}-e_{\infty}=\frac{\sum_{j=1}^{3}a_j\mathcal{R}_j}{D\nu_{\infty}}-\frac{r_{\infty}}{\nu_{\infty}}, \tag*{(24)}

where ν∞\nu_{\infty} is the carbon count per molecular site and r∞r_{\infty} the missing residual energy per molecular site in the infinite structure. Exact frequencies alone bound neither term. The held-out residual measures

E4−E1−3E2=R4−R1−3R2.(25)E_{4}-E_{1}-3E_{2}=\mathcal{R}_{4}-\mathcal{R}_{1}-3\mathcal{R}_{2}. \tag*{(25)}

It does not test R3\mathcal{R}_{3} independently. Thus a small holdout error supports a limited transfer test, not a rigorous error bar on e∞e_{\infty}.

A second algebraic estimate can use A4B6C5, A7B8C12 and A13B18C18 with normalized molecular weights (0.1642270145, 0.4239791982, 0.4117937874). Its difference from the primary estimate is proportional to the same holdout residual, so the two estimates are not independent validations. Further validation should use genuinely different longer-range arrangements while preserving the allowed local environments, or direct finite-patch energy calculations with controlled boundary corrections. Merely repeating a small periodic cell adds no independent information.

For a finite patch, EGE_G generally includes boundary and termination terms. A schematic extension is

EG≃∑μnGμϵμ+∑bNG,bγb+RG.(26)E_G \simeq\sum_{\mu} n_{G\mu}\epsilon_{\mu}+\sum_b N_{G,b}\gamma_b+\mathcal{R}_G. \tag*{(26)}

The boundary coefficients require independent determination. The infinite-limit basis formula should not be applied directly to H-capped G3 total energies without accounting for hydrogen and boundary chemistry.

Periodic energy checks and infinite-limit estimates

StructureNCN_{\mathrm{C}}EE (eV/cell)ee (eV/C)
A1B0C3-ene-I66-595.770492-9.026825636
A4B6C5-ene-I214-1934.469514-9.039577168
A7B8C12-ene-I402-3632.449374-9.035943716
A13B18C18-ene-I708-6398.970251-9.038093575
A1B0C3-yne-I102-884.811397-8.674621539
A4B6C5-yne-I342-2961.389040-8.659032281
A7B8C12-yne-I636-5509.674498-8.663010217
A13B18C18-yne-I1128––
A1B0C3-yne-II90-780.536587-8.672628744
A4B6C5-yne-II310-2684.462510-8.659556484
A7B8C12-yne-II572-4955.449142-8.663372626
A13B18C18-yne-II1020––
A1B0C3-yne-III90-780.668458-8.674093978
A4B6C5-yne-III366-3179.320884-8.686669082
A7B8C12-yne-III644-5591.873110-8.683032780
A13B18C18-yne-III1188––

Table S5. Relaxed periodic reference energies. A dash denotes a large-cell DFT calculation not performed. Relaxations initialized from the donor geometries are documented separately below.

The twelve relaxed basis energies enter the infinite-limit estimate for their respective chemistries. A13B18C18 is outside this fit. Its predicted total energy and carbon count are exact combinations of the same two donors in all four families, subject to the local-energy assumption for the energy. The complete cell totals are

FamilyC atomsPredicted (eV/cell)Relaxed DFT (eV/cell)
I-ene708-6399.179034-6398.970251
I-yne1128-9768.978517–
II-yne1020-8833.924117–
III-yne1188-10318.631110–

Table 2.

The two auxiliary I-ene checks obey the first-shell count identities

nA3B2C7=nA1B0C3+nA2B2C4,nA6B10C6=nA2B4C1+nA4B6C5.\mathbf{n}_{\mathrm{A3B2C7}}=\mathbf{n}_{\mathrm{A1B0C3}}+\mathbf{n}_{\mathrm{A2B2C4}},\qquad\mathbf{n}_{\mathrm{A6B10C6}}=\mathbf{n}_{\mathrm{A2B4C1}}+\mathbf{n}_{\mathrm{A4B6C5}}.

The two auxiliary donor energies are −1102.169062 eV (122 carbons) and −832.238499 eV (92 carbons) for A2B2C4 and A2B4C1, respectively. These checks count every environment on the periodic cell, including A:BBCCCC in the first identity and A:BBBBBC and C:ABBABB in the second. Only the seven bronze environments enter the infinite-limit calculation.

Testing A7B8C12 with its energy withheld. Let j=0,1,tj=0,1,t denote A1B0C3, A4B6C5 and A7B8C12, let M=(4,15,27)M=(4,15,27) be their molecular site counts and set fj=nj/Mjf_j=\mathbf{n}_j/M_j. The three count vectors have rank three. We define an approximate two-donor estimate by minimizing the unweighted squared difference between seven site frequencies, with no energy input from the target or any other target in this series:

λ=(ft−f0)⋅(f1−f0)∥f1−f0∥2=0.78884632,\lambda=\frac{(f_t-f_0)\cdot(f_1-f_0)}{\lVert f_1-f_0\rVert^2}=0.78884632,
u=Mt(1−λ)M0=1.42528736,v=MtλM1=1.41992337.u=\frac{M_t(1-\lambda)}{M_0}=1.42528736,\qquad v=\frac{M_t\lambda}{M_1}=1.41992337.

For each family we use the same u,vu,v and compute

E^t=NC,tuE0+vE1uNC,0+vNC,1.\widehat{E}_t=N_{\mathrm{C},t}\frac{uE_0+vE_1}{uN_{\mathrm{C},0}+vN_{\mathrm{C},1}}.

The denominator accounts for the different carbon contents of the decorations and preserves shifts of the energy zero per carbon. This projection approximates the environment vector. For example, A:BBBBCC occurs zero times in A7B8C12 but has positive weight in the donor mixture. The test measures both the approximation in the descriptor and energy transfer. After the test, the measured EtE_t supplies the independent third basis energy used for the bulk estimate.

Electronic calculations and structural validation

Periodic DFT and local geometry

We preoptimized the original periodic frameworks with RG2[21] before relaxation in VASP[22]. For the three A7B8C12 transfer tests, the supplied VASP 6.4.3 outputs identify PAW–PBE carbon with four valence electrons[25, 26]. These checks used a 400 eV cutoff, Γ sampling, Gaussian electronic smearing of 0.1 eV, an electronic tolerance of 10−510^{-5} eV and an ionic force tolerance of 0.02 eV/Å. The conjugate-gradient ionic relaxations allowed cell-shape changes at fixed volume (ISIF=4). Each run reached the specified stopping condition. For A13B18C18-ene-I, the retained evidence comprises the assembled coordinates, the relaxed RES export and eight reported ionic total energies. We use the archived periodic reference energies consistently for the bulk estimate. The calculations characterize relaxation on the sampled energy surfaces. We report neither phonon nor finite-temperature data.

Local geometry transfer and open boundaries

The large periodic starting structures use the relaxed A1B0C3 and A4B6C5 geometries of the same family. The open fragments use all three relaxed basis structures. We label each donor bond and each pair of neighbours of a common central atom by the A/B/C owner and the spsp or sp2sp^2 class. Each half of an ethynylene link is assigned to the adjacent core. Successive descriptors collect the sorted neighbour signatures over up to three graph shells. A target takes the deepest matching descriptor. Among donors bearing that descriptor, we retain those whose ideal reference-length mismatch is within 0.014 Å of the best match and average their relaxed distances. This gives a target dt∗d_t^* for each indexed pair tt. The neighbour-pair distances constrain the angles between adjacent bonds. G1 and G2 use planar fits over all carbon atoms.

Figure S16 shows the construction and its four carbon realizations. For complete G3, the lattice action (i,j)↦(−j,i+j)(i,j) \mapsto(-j,i+j) fixes the central A and permutes the remaining molecular sites in orbits of six. The open carbon graph supplies a 60° permutation PP preserving the molecule assignments, carbon types, connectivity and edge mask. Each sector contributes 39 A, 54 B and 64 C sites in addition to the shared central A. Each carbon orbit, including those in the central molecule, has six members. Select a representative in 0≤θ<60∘0 \le\theta< 60^\circ about the fragment centroid. For carbon ii, let a(i)a(i) index its representative and let k(i)k(i) give its sector relative to that representative. With RR the planar 60° rotation and yay_a the independent carbon coordinates, fit

xi=Rk(i)ya(i),min⁡{ya}∑t=(i,j)(∥xi−xj∥−dt∗)2.(27)x_i = R^{k(i)} y_{a(i)}, \qquad\min_{\{y_a\}} \sum_{t=(i,j)} \left(\lVert x_i-x_j\rVert-d_t^*\right)^2. \tag*{(27)}

The sum includes crossing bonds and crossing neighbour pairs. Six rotated copies of an indexed pair have one fitted distance. Averaging their targets and weighting by their multiplicity changes the objective only by a coordinate-independent constant. The yay_a can move both radially and tangentially throughout the fit. We choose the free overall azimuth by alignment with the construction geometry and export coordinates in the original atom order. The sixfold fit uses the complete ABC template as the starting geometry. The open carbon-only fragments have no added hydrogens.

For all four exported G3 structures, the 1.85 Å neighbour search recovers the full input bond graph. The maximum displacement between corresponding carbons under a 60° rotation is below 2.6×10−122.6 \times10^{-12} Å, and the maximum difference in corresponding bond lengths is below 2.2×10−122.2 \times10^{-12} Å. Table S7 and Figure S17 quantify deviations from donor lengths independently of these symmetry checks. The G3 structures have only undergone geometric fitting.

FamilyNsecN_{\mathrm{sec}}BseamB_{\mathrm{seam}}Inner RMS (Å)Seam RMS (Å)Seam max. (Å)
I-ene2,3252940.010370.020850.06839
I-yne3,6293060.005170.010350.02719
II-yne3,2652820.001040.000510.00307
III-yne3,6902880.000680.000420.00181

Table S7. Geometry of the fitted G3 sectors. NsecN_{\mathrm{sec}} counts independent carbon atoms and BseamB_{\mathrm{seam}} counts crossing bonds over all six boundaries. Lengths are deviations from the donor bond targets. The last column gives the maximum absolute crossing-bond deviation.

Four paired geometric checks. For each of the three A7B8C12 cases we compare the POSCAR of the transferred start to the CONTCAR of the same relaxation. The coordinates of A13B18C18-ene-I are available as the two archived geometries. Its final lattice parameters and fractional coordinates are rounded to three and six decimal places, respectively. For atom ii we minimum-image its difference in fractional coordinates, map that vector into the final in-plane cell, include its vertical change, and subtract the mean displacement. We report the RMS and maximum norm of this internal shift. For each indexed C–C bond bb, the signed change in length is dblast−dbstartd_b^{\mathrm{last}}-d_b^{\mathrm{start}}, using the actual periodic lattice at each endpoint. The bond RMS includes cell deformation. The area change is 100(Alast/Astart−1)100(A_{\mathrm{last}}/A_{\mathrm{start}}-1). All intended bonds survive in each case at a 1.85 Å cutoff. The 13 original reference coordinates likewise retain their intended periodic graphs. The G3 metric compares final fitted bond lengths to their donor targets, with the internal and cross-sector bonds counted separately. For A7B8C12-

ene-I, -yne-I and -yne-II respectively, the final energies of the three restarted structures exceed the corresponding original relaxed references by 0.404, 0.025 and 0.045 meV/C. Table S9 lists the two final energies side by side. Figure S17 reports each relaxation trace relative to its own last entry. Our energy-combination tests consistently use the original relaxed reference totals. The raw traces and the paired geometries permit either comparison to be reproduced.

CellEntriesFirst (eV)Last (eV)Original reference (eV)
A7B8C12-ene-I10-3632.272060-3632.286929-3632.449374
A7B8C12-yne-I14-5509.632005-5509.658662-5509.674498
A7B8C12-yne-II5-4955.414198-4955.423160-4955.449142
A13B18C18-ene-I8-6398.955997-6398.970251-6398.970251

Table S9. First and last DFT energies of the four relaxations initialized from assembled coordinates. The rightmost column gives the independent reference used to evaluate the energy combinations.

Carbon pzp_z Hamiltonian, bands and DOS

We used the five-parameter TB20 implementation of the multi-neighbour gt-TB carbon model[19, 20] and the specified 1.426 Å reference length. For distinct sites within 10 Å,

Hij=−3.02exp⁡[2.11(1−rij/1.426)] eV,Sij=0.235exp⁡[2.01(1−rij/1.426)].H_{ij}=-3.02\exp[2.11(1-r_{ij}/1.426)]\ \mathrm{eV},\qquad S_{ij}=0.235\exp[2.01(1-r_{ij}/1.426)].

Take Hii=0H_{ii}=0 and Sii=1S_{ii}=1 for the same site and image. Periodic-image terms carry the Bloch phase exp⁡(2πi kfrac⋅T)\exp(2\pi i\,\mathbf{k}_{\mathrm{frac}}\cdot\mathbf{T}) in the cell gauge. We solved Hc=EScHc=ESc. Each carbon supplies one pzp_z electron with spin degeneracy two. The result describes the out-of-plane π\pi sector, including on acetylenic carbons. Spin splitting, σ\sigma states, in-plane π\pi orbitals on spsp carbons and changes to boundary on-site energies are outside this model.

Bloch bands use 11 points per segment with shared endpoints counted once. In the reciprocal basis of each reported cell the path visits Γ\Gamma, b1/2\mathbf{b}_1/2, the adjacent Wigner–Seitz vertex common to bisectors of b1\mathbf{b}_1 and b1+b2\mathbf{b}_1+\mathbf{b}_2, then Γ\Gamma and b2/2\mathbf{b}_2/2. The vertex is labelled V for the oblique cells and K* for near-hexagonal metrics. These labels specify sampled geometrical points. The two-dimensional DOS uses periodic, unshifted 36236^2, 24224^2, 12212^2 and 12212^2 meshes for A1B0C3, A4B6C5, A7B8C12 and A13B18C18, respectively. We split each reciprocal parallelogram along its (1,1)(1,1) diagonal, interpolate every sorted band linearly within each triangle, and integrate its occupied area analytically between successive energy-bin edges. The nominal width is 2 meV. Bins are split at the sampled gap edges and at the common midgap zero for positive separations. The DOS is plotted as a bin average without Gaussian broadening or gap masking. Its integral is two states per carbon with spin. For a positive separation the energy zero is the midpoint between the highest occupied and lowest unoccupied energy over the union of mesh and path. For a band overlap both plots share the median eigenvalue of the uniformly sampled mesh. A signed separation compares the extrema of bands NC/2N_{\mathrm{C}}/2 and NC/2+1N_{\mathrm{C}}/2+1. The nested half-density mesh is a sampling diagnostic. In particular, a small positive separation on the sampled points does not prove a gap throughout the Brillouin zone.

CellnnMesh n/2n/2Mesh nnPathUnion
A1B0C3-ene-I36+459.27+459.27+459.27+459.27
A4B6C5-ene-I24+739.34+738.53+740.25+738.53
A7B8C12-ene-I12+620.27+620.27+620.27+620.27
A13B18C18-ene-I12+654.19+654.19+654.19+654.19
A1B0C3-yne-I36-230.09-252.56-239.39-252.56
A4B6C5-yne-I24-47.46-50.22-33.85-50.22
A7B8C12-yne-I12+4.97+4.23+4.04+4.04
A13B18C18-yne-I12-5.06-12.22-17.44-17.44
A1B0C3-yne-II36+40.39+16.33+35.37+16.33
A4B6C5-yne-II24+35.60+35.60+40.36+35.60
A7B8C12-yne-II12+0.05-0.61-0.61-0.61
A13B18C18-yne-II12+19.76+2.44+2.44+2.44
A1B0C3-yne-III36+315.59+315.59+315.59+315.59
A4B6C5-yne-III24+0.17+0.17+11.25+0.17
A7B8C12-yne-III12+0.03+0.03+0.03+0.03
A13B18C18-yne-III12+113.59+113.59+113.59+113.59

Table S10. Sampling of the frontier bands. Separations in meV are evaluated over the indicated uniform mesh, the displayed path, or their union. The DOS integrates the n×nn \times n mesh. A negative value denotes overlap. Values close to zero should be interpreted at the mesh resolution.

Finite levels and boundary weights

All finite spectra use open boundaries. G1 and G2 use their full-fragment fits and G3 uses the sector fit of Eq. (27). For each neutral patch the reported 28 levels comprise 14 occupied and 14 unoccupied levels about its HOMO–LUMO midpoint. For G3 a sparse shift-invert solver targets the frontier. Negative pivots of the symmetrically permuted real H−μSH-\mu S locate the half-filling index. The implementation checks the row and column permutations, residuals and positive overlap. For SS-normalized eigenvectors the positive atomic populations are wi=∣(S1/2ci)∣2w_i = \lvert(S^{1/2}c_i)\rvert^2. The inverse participation ratio is ∑iwi2\sum_i w_i^2 for each normalized solver eigenvector. Within a degenerate subspace this single-vector quantity can depend on the basis. Orbital maps below use the complete group unless an individual vector is indicated.

Boundary seeds are atoms with fewer neighbours than their bulk spsp or sp2sp^2 coordination. The mask includes all atoms within two graph bonds of a seed. We also archive the results for one and three bonds. To select a map, adjacent eigenvalues separated by at most 10−510^{-5} eV are grouped; the mean atomic weight of the group gives a basis-independent population for a degenerate subspace. We select the complete group with the highest average boundary fraction in the reported window, omitting groups touching its endpoints. Selection yields an upper envelope over the tested states. Our measures establish spatial concentration at the model boundary. They carry no assertion of protected edge or corner modes.

Geometry sensitivity and the population of a degenerate level

For each sector-fitted G3, every pair inside the 10 Å hopping cutoff maps to another included pair under PP. With UU the permutation matrix, the relative Frobenius errors ∥UTHU−H∥F/∥H∥F\lVert U^{T}HU-H\rVert_{\mathrm{F}}/\lVert H\rVert_{\mathrm{F}} and ∥UTSU−S∥F/∥S∥F\lVert U^{T}SU-S\rVert_{\mathrm{F}}/\lVert S\rVert_{\mathrm{F}} are below 9×10−139 \times10^{-13} and 4×10−134 \times10^{-13}, respectively. We compare these sector-fit spectra with a separate fit of all atomic coordinates without a symmetry constraint, using the same complete ABC support, atom order, donor targets, open edges and Hamiltonian parameters. The electronic problem is solved on each set of coordinates.

For a group of gg states the plotted weight is wi=g−1∑n∣S1/2cn∣2w_i = g^{-1} \sum_n \lvert S^{1/2}c_n\rvert^2. Its rotational mismatch is

D60=12∑i∣wi−wP(i)∣.(28)D_{60} = \frac{1}{2}\sum_i \lvert w_i - w_{P(i)}\rvert. \tag*{(28)}

For a complete degenerate eigenspace the population is invariant under a change of basis. Its spectral projector commutes with the rotation when HH and SS do. An individual real eigenvector in a doublet can give a direction-dependent density. The 10−510^{-5} eV grouping threshold also specifies the resolution used to compare levels on the unconstrained structures.

The unconstrained I-ene geometry has an isolated, one-sided LUMO at the chosen resolution, with D60=0.996D_{60} = 0.996 (geometry comparison in Table S11). Figure S18 compares populations on the sector-fitted coordinates alone. For I-ene, an individual member of the LUMO doublet has D60=0.558D_{60} = 0.558 and the complete doublet has D60=1.24×10−8D_{60} = 1.24 \times10^{-8}. Its small shell fraction, 0.124%, is shared by both members. The edge-rich doublet in Table S12 lies higher in energy. Comparing the largest shell weights on the two structures tests boundary enrichment without assuming that the selected energy levels track continuously between geometries.

Table S11: LUMO symmetry on the same indexed carbon graph before and after imposing the sector constraint. The RMS displacement compares the two geometries after rigid alignment. The next two columns give the LUMO-group weight in the two-bond shell. The last three refer to the sector fit. D60D_{60} for one member of a doublet describes the particular real vector returned by the solver.

FamilyRMS (Å)Free fit (%)Sector fit (%)ggD60D_{60} singleD60D_{60} group
I-ene0.0176072.3290.12420.5581.24×10−81.24 \times10^{-8}
I-yne0.0267717.63412.45119.97×10−109.97 \times10^{-10}9.97×10−109.97 \times10^{-10}
II-yne0.003974.7574.75320.5541.23×10−81.23 \times10^{-8}
III-yne2.63×10−62.63 \times10^{-6}9.0059.00520.5531.19×10−81.19 \times10^{-8}

Table S11.

Table S12: Frontier levels of the sector-fitted G3 fragments. Δ\Delta is the HOMO–LUMO spacing. The shell column is the percentage of atoms in the two-bond mask. HOMO, LUMO and selected columns are mean group populations in that mask. EselE_{\mathrm{sel}} is the selected group energy relative to the neutral midpoint. The selection excludes groups touching either end of the computed window.

FamilyC atomsΔ\Delta (meV)Shell (%)HOMO (%)LUMO (%)Selected (%)EselE_{\mathrm{sel}} (meV)
I-ene13,9502.3467.960.1570.12479.05+239.81
I-yne21,7740.0696.1418.6212.4519.41+4.61
II-yne19,5903.4086.229.044.7510.42+5.68
III-yne22,1405.7615.8012.459.0025.66−20.18

Table S12.

Data and reproduction

data/energies.csv stores cell totals, and code/update_results.py generates the tables. Periodic files in data/bands/ and data/dos/ use the full composition–linkage–alphabet name. The band JSON files give the actual input geometry, reciprocal path, DOS mesh and energy reference. The original electronic tables in data/levels/ and data/ldos/ supply G1, G2 and the unconstrained G3 comparison. The sector-fit calculation is in sector_fit/. Its results/summary/ directory records the full 943-site sequence, bond-length residuals and group populations. Each family directory contains a Cartesian POSCAR and the six original atom indices associated with each independent position. The primary G3 levels and atomic weights are in sector_fit/results/spectra/. The separately distributed G3 calculation archive has the same layout from results/ down. Geometry, transfer and spectral scripts accompany the data. The first and last energies for the four paired relaxations and the geometric differences are regenerated by code/check_transfer.py. data/ transfer_checks/ stores the three A7B8C12 inputs, outputs in coordinate form and energy traces. data/mesh_spectra/ records the mesh and path eigenvalues used for the periodic spectra.

Supplementary figures

Figures S1–S7 document the construction and selected atomic geometries. Figures S8–S13 give the computed spectra and boundary masks. Figure S14 compares seven predicted energies with relaxed DFT references. Figure S15 gives the metallic-mean comparison. Figures S16–S18 show the four G3 assemblies, their distance-transfer errors and the LUMO rotation test.

Figure S1. Integer colouring and finite stopping. The local A/C/B field, the 19 digit offsets at the first scale, and the increasing lower bound HhH_h on the distance of a nonzero high digit. These are exact construction diagrams; they are independent of chemical bond lengths.

Figure S2. Finite-state certificate. Sparsity of the 301-state transition matrix, the distribution of state rectangle types, and the interval substitution. The rectangle product is a partition device; the two-dimensional colour field is not assumed to factor into independent one-dimensional colours.

Figure S3. Finite-window convergence and infinite frequencies. Centred hexagonal windows approach the exact molecular fractions. Horizontal dashed lines and the heights of the seven-environment bars denote exact limits. Numerical window counts corroborate the certificate and are not used to fit its frequencies.

Figure S5. Four chemical decorations on matched finite supports. G1 and G2 use the fitted carbon coordinates. Each G3 is assembled from one independent sector of the complete ABC code. Numbers count carbon atoms in the open fragments.

Selected periodic atomic structures: columns A1B0C3, A4B6C5, A7B8C12, A13B18C18; rows I-ene, I-yne, II-yne, III-yne. Counts: I-ene 66 C, 214 C, 402 C, 708 C; I-yne 102 C, 342 C, 636 C, 1,128 C; II-yne 90 C, 310 C, 572 C, 1,020 C; III-yne 90 C, 366 C, 644 C, 1,188 C

Figure S6. Selected periodic atomic structures. The three basis cells and A13B18C18 holdout for each system. Cell boundaries and periodic bonds are shown using the archived atomic coordinates; counts are carbon atoms, not molecular sites.

Figure S9. I-yne periodic bands and DOS. The three basis geometries are relaxed. The large-cell curve uses transferred coordinates.

Figure S10. II-yne periodic bands and DOS. The large cell uses transferred coordinates. DOS is spin summed per carbon.

Figure S12. Frontier levels across three generations. Each panel shows the 14 occupied and 14 unoccupied levels nearest the neutral midpoint in meV. Zero on the horizontal axis labels the HOMO and one labels the LUMO. Colours give the single-eigenvector inverse participation ratio. Each energy axis spans the displayed levels of that fragment. G3 uses the sector fit.

Figure S13. Boundary masks and frontier populations of the sector-fitted G3 fragments. Left, the two-bond boundary shell. Middle and right, mean atomic populations of the HOMO and LUMO groups. Labels specify group size and shell weight. The same nonlinear NCwiN_Cw_i scale applies to all populations. Horizontal carbon extents are 22.74, 31.04, 28.81 and 30.09 nm from top to bottom.

References

  1. [1]D. Shechtman, I. Blech, D. Gratias, and J. W. Cahn. Metallic phase with long-range orientational order and no translational symmetry. Physical Review Letters, 53:1951–1953, 1984. doi: 10.1103/PhysRevLett.53.1951.DOI
  2. [2]Dov Levine and Paul Joseph Steinhardt. Quasicrystals: A new class of ordered structures. Physical Review Letters, 53:2477–2480, 1984. doi: 10.1103/PhysRevLett.53.2477.DOI
  3. [3]Dov Levine and Paul J. Steinhardt. Quasicrystals. i. definition and structure. Physical Review B, 34:596–616, 1986. doi: 10.1103/PhysRevB.34.596.DOI
  4. [4]Roger Penrose. The role of aesthetics in pure and applied mathematical research. Bulletin of the Institute of Mathematics and its Applications, 10:266–271, 1974.
  5. [5]Tomonari Dotera, Shinichi Bekku, and Primoz Ziherl. Bronze-mean hexagonal quasicrystal. Nature Materials, 16:987–992, 2017. doi: 10.1038/nmat4963.DOI
  6. [6]Joshua E. S. Socolar and Joan M. Taylor. An aperiodic hexagonal tile. Journal of Combinatorial Theory, Series A, 118:2207–2231, 2011. doi: 10.1016/j.jcta.2011.05.001.DOI
  7. [7]Toran osuke Matsubara, Akihisa Koga, Atsushi Takano, Yushu Matsushita, and Tomonari Dotera. Aperiodic approximants bridging quasicrystals and modulated structures. Nature Communications, 15:5742, 2024. doi: 10.1038/s41467-024-49843-4.DOI
  8. [8]Toran osuke Matsubara, Akihisa Koga, and Tomonari Dotera. Triangular and dice quasicrystals modulated by generic one-dimensional aperiodic sequences. Physical Review B, 111:104104, 2025. doi: 10.1103/PhysRevB.111.104104.DOI
  9. [9]Qitang Fan, Linghao Yan, Matthias W. Tripp, et al. Biphenylene network: A nonbenzenoid carbon allotrope. Science, 372:852–856, 2021. doi: 10.1126/science.abg4509.DOI
  10. [10]Chee-Tat Toh, H. Zhang, J. Lin, et al. Synthesis and properties of free-standing monolayer amorphous carbon. Nature, 577:199–203, 2020. doi: 10.1038/s41586-019-1871-2.DOI
  11. [11]Guoxing Li, Yuliang Li, Huibiao Liu, Yanbing Guo, Yongjun Li, and Daoben Zhu. Architecture of graphdiyne nanoscale films. Chemical Communications, 46:3256–3258, 2010. doi: 10.1039/B922733D.DOI
  12. [12]Sung Joon Ahn, Pilkyung Moon, Tae-Hoon Kim, et al. Dirac electrons in a dodecagonal graphene quasicrystal. Science, 361:782–786, 2018. doi: 10.1126/science.aar8412.DOI
  13. [13]Wei Yao, Ervin Wang, Changhua Bao, et al. Quasicrystalline 30-degree twisted bilayer graphene as an incommensurate superlattice with strong interlayer coupling. Proceedings of the National Academy of Sciences, 115:6928–6933, 2018. doi: 10.1073/pnas.1720865115.DOI
  14. [14]Guodong Yu, Zewen Wu, Zhen Zhan, Mikhail I. Katsnelson, and Shengjun Yuan. Dodecagonal bilayer graphene quasicrystal and its approximants. npj Computational Materials, 5:122, 2019. doi: 10.1038/s41524-019-0258-0.DOI
  15. [15]Leonid A. Chernozatonskii, Victor A. Demin, Alexander G. Kvashnin, and Dmitry G. Kvashnin. Diamane quasicrystals. Applied Surface Science, 572:151362, 2022. doi: 10.1016/j.apsusc.2021.151362.DOI
  16. [16]Natalie A. Wasio et al. Self-assembly of hydrogen-bonded two-dimensional quasicrystals. Nature, 507:86–89, 2014. doi: 10.1038/nature12993.DOI
  17. [17]E. Prodan and W. Kohn. Nearsightedness of electronic matter. Proceedings of the National Academy of Sciences, 102:11635–11638, 2005. doi: 10.1073/pnas.0505436102.DOI
  18. [18]Axel van de Walle and Gerbrand Ceder. Automating first-principles phase diagram calculations. Journal of Phase Equilibria, 23:348–359, 2002. doi: 10.1361/105497102770331596.DOI
  19. [19]Zhenhao Gong, Xizhi Shi, Jin Li, Shifang Li, Chaoyu He, Tao Ouyang, Chunyiao Zhang, Chao Tang, and Jianxin Zhong. Theoretical prediction of low-energy Stone–Wales graphene with an intrinsic type-iii Dirac cone. Physical Review B, 101:155427, 2020. doi: 10.1103/PhysRevB.101.155427.DOI
  20. [20]Xizhi Shi, Shifang Li, Jin Li, Tao Ouyang, Chunxiao Zhang, Chao Tang, Chaoyu He, and Jianxin Zhong. High-throughput screening of two-dimensional planar sp2 carbon space associated with a labeled quotient graph. The Journal of Physical Chemistry Letters, 12:11511–11519, 2021. doi: 10.1021/acs.jpclett.1c03193.DOI
  21. [21]Xizhi Shi, Chaoyu He, Chris J. Pickard, Chao Tang, and Jianxin Zhong. Stochastic generation of complex crystal structures combining group and graph theory with application to carbon. Physical Review B, 97:014104, 2018. doi: 10.1103/PhysRevB.97.014104.DOI
  22. [22]Georg Kresse and Jurgen Furthmuller. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set. Physical Review B, 54:11169–11186, 1996. doi: 10.1103/PhysRevB.54.11169.DOI
  23. [23]Boris Solomyak. Dynamics of self-similar tilings. Ergodic Theory and Dynamical Systems, 17:695–738, 1997. doi: 10.1017/S0143385797084988.DOI
  24. [24]Boris Solomyak. Corrections to ‘dynamics of self-similar tilings’. Ergodic Theory and Dynamical Systems, 19:1685–1685, 1999. doi: 10.1017/S014338579917161X.
  25. [25]Peter E. Blochl. Projector augmented-wave method. Physical Review B, 50:17953–17979, 1994. doi: 10.1103/PhysRevB.50.17953.DOI
  26. [26]John P. Perdew, Kieron Burke, and Matthias Ernzerhof. Generalized gradient approximation made simple. Physical Review Letters, 77:3865–3868, 1996. doi: 10.1103/PhysRevLett.77.3865.DOI

Paper details

vlnc:W_fgtkgejc
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents