betaFeedback

WorksPhysics and Astronomy

Rheological properties and shear-induced structures of ferroelectric nematic liquid crystals

Abstract

Recently discovered ferroelectric nematic (NF) liquid crystals are fluids with a polar orientational order. The electric polarization vector can be aligned by an electric field and by surface anchoring. Here, we explore how the polarization field and effective viscosity of the NF materials are affected by shear flows. We explore three NF materials, abbreviated RM734, DIO, and a room-temperature FNLC919, all of which exhibit a paraelectric nematic (N) and the NF phase. All materials show an increase of the viscosity upon cooling, with an Arrhenius behavior. In DIO and FNLC919, the antiferroelectric SmZA phase shows a strong dependence of the effective viscosity on the shear rate: this viscosity is lower than the viscosity of the N and NF phases at high shear rates but is much higher when the shear rate is low. The behavior is associated with the layered structure of the SmZA phase. All mesophases exhibit shear-thinning behavior at low shear rates and a nearly Newtonian behavior at higher shear rates. In terms of alignment, we observe three regimes in the N and NF phases: flow-alignment at low shear rates, log-rolling regime with the director and polarization along the vorticity axis at high shear rates, and polydomain structures at intermediate rates. In the flow-aligning regime, the NF polarization does not tilt away from the shear direction, which is in sharp contrast to the flow-induced tilt of the N director. The effect is attributed to the avoidance of splay deformations and associated space charge in the flowing NF. The temperature and shear rate dependencies of the viscosity and the uncovered shear-induced structural effects of NF advance our understanding of these materials and potentially facilitate their applications.

Introduction

A nematic (N) liquid crystal (LC) formed by achiral rod-like molecules shows a uniaxial long-range orientational order but a lack of positional order. The molecules align along a common direction described by a unit vector n^\hat{\mathbf{n}}, called the director, with the property n^≡−n^\hat{\mathbf{n}}\equiv-\hat{\mathbf{n}}, which makes the material paraelectric. Recent synthesis and characterization of liquid crystal with rod-like molecules with large longitudinal electric dipoles align in a polar fashion along the director, resulting in producing a spontaneous macroscopic electric polarization. [1, 2, 3, 4] In the NF\mathrm{N}_{\mathrm{F}} phase, the polarization is strong, P∼6×10−2 C/m2P\sim6\times10^{-2}\ \mathrm{C/m}^{2}, enabling electro-optic response to electric fields as small as ∼102 V/m\sim10^{2}\ \mathrm{V/m}, a thousand times smaller than those used to reorient nonpolar N. [4]

Orientation of a paraelectric N is strongly affected by flows. Over the last few decades, significant progress has been achieved in understanding the shear-induced structures and rheology of the paraelectric N. [5, 6, 7, 8, 9] These materials exhibit different modes of response to the applied shear, such as flow-alignment, [5, 6] tumbling, [10] log-rolling, [11, 12] and kayaking. [7, 8] For example, well-studied nematics MBBA [13] and 5CB [14] show a flow alignment, i.e., n^\hat{\mathbf{n}} aligns parallel to the shear plane formed by the velocity and its gradient. In contrast, 8CB, formed by molecules with a slightly longer aliphatic tail as compared to 5CB and

exhibiting a smectic A (SmA) phase in addition to the N, shows a tumbling behavior, with n^\hat{\mathbf{n}} rotating in the shear plane and realigning along the vorticity direction perpendicular to the shear plane. [15]

In contrast to the paraelectric N, very little is known about the rheological behavior of the NF\mathrm{N}_{\mathrm{F}}. One should expect a rich plethora of flow phenomena, thanks to the presence of spontaneous electric polarization, its spatial variations, intrinsic to the fluid nature of the NF\mathrm{N}_{\mathrm{F}}, and strong coupling to the electric fields. [4, 16] For example, Dhara et al. reported an increase in the effective viscosity of the NF\mathrm{N}_{\mathrm{F}} material, abbreviated RM734, in the presence of an electric field. [17] Even stronger electroviscous response was reported recently by Nishikawa et al. for another NF\mathrm{N}_{\mathrm{F}} material, abbreviated DIO. [18] However, the structural response of NF\mathrm{N}_{\mathrm{F}} to shear, its flow regimes, dependence of the effective viscosities on shear rate and temperature, proximity of phase transitions, etc., remain underexplored.

In this work, we perform comparative rheological studies of the N, NF\mathrm{N}_{\mathrm{F}} phases, as well as the intermediate phase separating the N and NF\mathrm{N}_{\mathrm{F}}, in three different materials, RM734, [1] DIO, [2] and FNLC919. [19] Namely, we measure the effective viscosity as a function of temperature and shear rate and determine the structural response to shear flows using a plate-plate rheometer equipped with an in situ polarizing optical microscope (POM). Effective viscosity increases as the temperature is lowered and the material transitions from the N to the NF\mathrm{N}_{\mathrm{F}} phase. Far away from the phase transition temperatures, the viscosity follows the Arrhenius behavior but increases sharply near the transition points. As a function of the shear rate, both the N and NF\mathrm{N}_{\mathrm{F}} phases show a strong shear-thinning at shear rates below 100 s−1100\ \mathrm{s}^{-1}, and a nearly Newtonian behavior at higher shear rates. The structural response of the N and NF\mathrm{N}_{\mathrm{F}} phases in all materials show three regimes as a function

Email: [email protected]

Supplementary Information available: [details of any supplementary information available should be included here]. See DOI: 10.1039/x0xx00000x of shear rate: flow alignment at low rates, γ˙<102 s−1\dot{\gamma} < 10^{2}\ \mathrm{s}^{-1}, log-rolling at γ˙>103 s−1\dot{\gamma} > 10^{3}\ \mathrm{s}^{-1}, and polydomain structures at intermediate rates. In the flow-aligning regime, the N director tilts away from the shear direction, while in the NF_{\mathrm{F}} phase, such a tilt is absent. This important difference is caused by the avoidance of splay deformations and associated space charge in the NF_{\mathrm{F}} phase.

Experimental methods

Materials

We explore three different NF_{\mathrm{F}} materials, abbreviated RM734,[1] DIO,[2] and a room-temperature FNLC919.[19, 20] The phase sequences for these materials are presented in Figure 1. RM734 was purchased from Instec, Inc. (purity better than 99 wt%). DIO was synthesized as described previously by Nishikawa et al. [2]. A room-temperature NF_{\mathrm{F}} material FNLC919 is provided by Merck KGaA (Darmstadt, Germany).

Figure 1. Phase sequences of RM734, DIO, and FNLC919

The N and NF_{\mathrm{F}} phases in all three materials are separated by an intermediate phase. Its nature is still debated, prompting us to present a brief overview. It was first observed in DIO,[2, 21, 22, 23] then in RM734,[24] and in other materials.[23, 25, 26, 27, 28] This phase was labeled as M2_2,[2] N_{\mathrm{X}},[22] SmZ_{\mathrm{A}},[29] N_{\mathrm{S}},[30] and M_{\mathrm{AF}}$;[31] the abbreviations reflect the perceived structure of this intermediate phase. The first report by Nishikawa et al. [2] on DIO pointed out that the transition upon cooling from the N to the new phase known nowadays as the NF_{\mathrm{F}}, happens in two steps. Brown et al. [21] and Erkoreka et al. [22] suggested that the phase is antiferroelectric.[22] Subsequent synchrotron-based small and wide-angle X-ray scattering (SAXS/WAXS) combined with polarizing optical microscopy observations by Chen et al. [32] demonstrated that the intermediate phase of DIO exhibits a lamellar type of order with a periodicity of 17.5 nm.[32] Within each period, there are two sublayers of a thickness w=8.8w = 8.8 nm each, manifested by an equilibrium sinusoidal electron-density modulation observed in non-resonant SAXS. The molecules are tangential to the layers and polarly ordered; the direction of polarity alternates from one subdomain to the next. The density modulation observed in the intermediate phase of DIO by Chen et al. [32] justifies the abbreviation “Sm”, since it traditionally stands for a “smectic”. “Z” reflects the fact that the average molecular orientation is parallel to the layers rather than perpendicular to them, as in a SmA. The subscript “A” stands for antiferroelectric. A different model was suggested recently by Rupnik et al. [33] on the basis of experimental studies of the intermediate phase in RM734, which in a pure material extends over a very narrow temperature range of about 1 °C. The N

phase of RM734 shows a dramatic decrease of the splay elastic constant K1K_1 upon the approach to the NF_{\mathrm{F}}.[34] When an ionic fluid is added to RM734, the intermediate phase range increases dramatically and shows periodic domains of a period up to 10 μm. The observations are explained by the splay-modulated phase, abbreviated NS_{\mathrm{S}}, in which a reversal of the splay div P\mathbf{P} and of the average polarization P\mathbf{P} decreases the overall space charge and allows the structure to fill the space efficiently. In another study, a doubly splay-modulated antiferroelectric phase has been observed in RM734 in cells with ionic polymers as aligning layers.[35] In what follows, we keep the abbreviation SmZA_{\mathrm{A}} for DIO since the material shows one-dimensional periodic density modulation, a defining property of a smectic order, directly revealed in SAXS,[32] and supported by light scattering experiments,[36] response to shear flow[18] and by the behavior of dislocations in DIO with chiral additives.[37] We use the same abbreviation for the intermediate antiferroelectric phase of FNLC919 since a similar density variation with a period of 6.7 nm has been documented in SAXS experiments by Paul et al. [38].

Rheometry

Rheological measurements are performed using a strain-controlled rheometer Anton Paar, MCR 302 with a parallel-plate measuring system having a plate diameter of 25 mm. The zero values of the normal force and torque were set for each test before introducing the sample. The sample was confined between the plates, and the excess material was removed. The plate gap was fixed to be 200 μm for RM734, 150 μm for DIO, and 100 μm for FNLC919; at these distances, the normal force was zero after the assembly of the test cells. No alignment layers were used. The top plate rotates at different shear rates while the bottom plate is fixed. A Peltier element was attached to the bottom plate to control the temperature with an accuracy of 0.1°C. The rheometer was placed under a hood to maintain temperature uniformity. The temperature dependence of effective shear viscosity was measured at a low shear rate of γ˙=2.5 s−1\dot{\gamma} = 2.5\ \mathrm{s}^{-1} and a high shear rate of γ˙=500 s−1\dot{\gamma} = 500\ \mathrm{s}^{-1} upon cooling and heating. The cooling and heating rates are 2 °/min in the range of 160–110 °C for RM734, 110–58 °C for DIO, and 85–18 °C for FNLC919, respectively.

In-situ polarizing optical microscopy

To characterize the shear-induced structural changes, we use the Linkam Optical Shearing System CSS450 in parallel disk geometry. The shear device features a window for observing textures using a polarizing optical microscope (POM) in the transmission mode. The bottom plate rotates relative to the top plate with a controllable angular velocity in the range (0.001–10) rad s−1^{-1}. Both plates contain quartz windows of 2.5 mm in diameter, centered at 6.25 mm from the axis of rotation. A separately controlled heater maintains the temperature of the sample fixed within 0.1 °C. No alignment layer is used so that the substrates of CSS450 yield degenerate tangential alignment of the director n^\hat{\mathbf{n}}. To reconstruct the structural response under shear flow, we use POM Olympus BX51 equipped with a video camera Baslar ac1920-155um (10-40 frames per second) with a full-wave-plate (FWP) 530 nm optical compensator. The slow axis λg\lambda_g of the optical compensator is oriented at 45° to the crossed polarizers.

Polychromatic polarizing microscopy

A polychromatic polarizing microscope (PPM) generates a map of director orientation in a single shot of a camera.[39] The PPM, invented by Shribak in 2009[40], is equipped with a special polychromatic polarization state generator (PSG) and an achromatic circular analyzer. PPM produces a full hue-saturation-brightness (HSB) color spectrum in birefringent materials. The HSB hues in PPM depend on the slow axis orientation of the birefringent specimen with respect to a preset ‘zero’ direction (usually oriented along the East-West axis of a microscope’s stage). This implies that the color changes occur continuously while the stage rotates, repeating every 180°, and the state of extinction is never observed. The PPM allows one to capture an image of fast-moving and low-birefringent structures in real-time, limited only by the acquisition time of the camera. The PPM approach is different from that of a conventional polarizing microscope, in which the retardance of the specimen determines the interference color in the Michel-Lavy chart.

The optical scheme of a PPM, which consists of a polychromatic PSG and an achromatic circular analyzer, with the N compensating cell, is shown in Figure 2. The PSG produces polarized light with the polarization ellipse orientation that depends on the wavelength. PSG comprises a rotatable polarizer, an achromatic quarter-wave plate (AQWP), and an optically active waveplate (OAWP). The polarizer and AQWP produce a polarization ellipse with a major axis parallel to the slow axis of AQWP. When the elliptically polarized light travels along the optical axis of the waveplate OAWP, the polarization ellipse rotates by some angle. The rotation angle depends on the thickness of OAWP and the wavelength of light. An achromatic quarter-wave plate (AQWP) with a slow axis oriented at 45° and an analyzer are combined to form the achromatic left circular analyzer. The achromatic quarter-wave plate minimizes the variation in retardance across a broad spectral range.[41, 42]

Image not extracted

Figure 2. Schematic of the experimental setup to characterize the structural changes of the ferroelectric nematic liquid crystal caused by shear flow using PPM with the N compensating cell. λN\lambda_N is the slow axis of the N compensating cell.

A limitation of an original PPM device is that the recorded retardance of the birefringent specimen should be less than 250 nm. To overcome the limitation, we add an anisotropic optical compensator, representing a planar LC cell of the N material E7 (Jiangsu Hecheng Display Technology Co., Ltd. (HCCH), Jiangsu, China) with a slow axis (director) λN\lambda_N. The N compensating cell introduces an optical retardance of an opposite sign to that of the sample, in order to reduce it below 250 nm. The compensating cell is inserted between the sheared specimen and the achromatic left circular analyzer, with λN\lambda_N being perpendicular to the optic axis of the sheared material so that the retardance of this cell reduces the measured retardance of the system. The compensating cell is assembled from two flat glass substrates, spin-coated with a polyimide PI2555 (Nissan Chemicals, Ltd.), and rubbed unidirectionally to achieve a uniaxial planar alignment of λN\lambda_N. The optical birefringence Δn=0.22\Delta n = 0.22 of E7[43] (reported at the wavelength of 600 nm, room temperature T=25T = 25 °C) is close to the birefringence of the explored materials, thus the thickness of the compensating cell was selected to be close to the thickness of the sheared samples. To generate the map of director orientations of the specimen from the HSB hue image of the PPM, spline interpolation of hue data has been performed using Mathematica code.[39]

Optical retardance and PolScope

To measure the optical retardance Γ\Gamma of the NF_F materials as a function of shear rate, we use the LC PolScope approach, invented by Oldenburg[44, 45] and applications of which to liquid crystals have been described in Refs. 46, 47. The LC PolScope represents a polarizing optical microscope with a variable optical compensator(s), which might be an N cell controlled by an applied electric field. Once the image of a sample is taken for a few different settings of the compensator, numerical analysis

allows the unit to map the optical retardance Γ\Gamma of the sample and reconstructs the in-plane orientation of the optical axis n^\hat{\mathbf{n}}. The PolScope observations in this study are performed using the Exicor Microimager (Hinds Instruments), operating at four wavelengths: 475 nm, 535 nm, 615 nm, and 655 nm, which allows for the characterization of samples with optical retardance up to 3500 nm.

Results and discussion

Shear viscosity vs. temperature

The effective shear viscosity η\eta of all three materials in the N, NF_{\mathrm{F}} and intermediate phases generally decreases with the temperature, Figure 3a,Figure 3b,Figure 3c, a behavior typical for many N materials, including MBBA, 5CB and 8CB.[48, 49, 50] Notable features are pretransitional increases of η\eta and discontinuous changes at the phase transitions. In RM734, η\eta drops from 0.10 Pa ⋅\cdot s in the NF_{\mathrm{F}} phase at 115 °C to 0.03 Pa ⋅\cdot s in the N phase at 160 °C; these values are similar to the previous results measured by Dhara et al.[17].

Image not extracted

Figure 3. The temperature dependence of the effective shear viscosity η\eta of RM734 (a) at a shear rate of γ˙=500\dot{\gamma}=500 s−1^{-1}, DIO (b), and FNLC919 (c) at a shear rate of γ˙=2.5\dot{\gamma}=2.5 s−1^{-1} and γ˙=500\dot{\gamma}=500 s−1^{-1}. The Arrhenius plot of the effective shear viscosity η\eta of RM734 (d), DIO (e), and FNLC919 (f) at the shear rate of γ˙=500\dot{\gamma}=500 s−1^{-1}.

In the middle of the NF_F temperature range of RM734, the shear viscosity is η=0.13\eta= 0.13 Pa · s, Figure 3a. Interestingly, this value is close to the rotational viscosity of RM734 γ=0.15\gamma= 0.15 Pa · s measured at the same temperature by rotating the polarization vector P\mathbf{P} by an electric field E\mathbf{E} applied perpendicularly to P\mathbf{P}, which maximizes the realigning torque τ=P×E\boldsymbol{\tau} = \mathbf{P} \times\mathbf{E}.[51] Furthermore, the data for RM734, Figure 3a, and DIO, Figure 3b, can be compared to the effective viscosity ηˉ\bar{\eta}, called “polarization reversal dissipation coefficient” and measured in the electro-optical responses of the NF_F phase to the field E\mathbf{E} that is antiparallel to P\mathbf{P}.[52] Chen et al. found this coefficient to be ηˉ=0.05\bar{\eta} = 0.05 Pa · s at the highest temperature of the NF_F phase in both RM734 and DIO (and in all their binary mixtures), which is remarkably close to the values of shear viscosity η=0.06\eta= 0.06 Pa · s in Figure 3a,Figure 3b at the highest temperatures of the NF_F phase. The polarization reversal dissipation coefficient ηˉ\bar{\eta} in Ref. 52 shows an Arrhenius-like temperature dependencies, which is again close to the behavior of the shear viscosity η\eta, as discussed below.

The temperature dependencies of viscosity away from the transition points can be fitted by an Arrhenius law η=η0eEa/kBt\eta= \eta_0 e^{E_a/k_Bt}, Figure 3d,Figure 3e,Figure 3f, with the activation energies EaE_a listed in Table 1. Here, kBk_B is the Boltzmann constant and tt is the absolute temperature. The activation energy EaE_a in the NF_F phase is more than twice that in the N phase in all three materials. The viscosity of DIO and FNLC919 is almost the same at a low shear rate of γ˙=2.5\dot{\gamma} = 2.5 s−1^{-1} and at a high shear rate of γ˙=500\dot{\gamma} = 500 s−1^{-1} in the N and NF_F phases.

RM734DIOFNLC919
Phase, TT (°C)EaE_a (kJ/mole)Phase, TT (°C)EaE_a (kJ/mole)Phase, TT (°C)EaE_a (kJ/mole)
N, 160 °C-140 °C25.7±0.2N, 110 °C-93 °C20.4±0.3N, 75 °C-55 °C25.3±0.3
SmZA_A, 79 °C-70 °C27.8±0.2SmZA_A, 42 °C-33 °C34.9±0.2
NF_F, 120 °C-100 °C60.8±0.5NF_F, 66 °C-58 °C41.1±0.3NF_F, 28 °C-18 °C53.6±0.5

Table 1. Activation energy of RM734, DIO, and FNLC919 in the N, NF_F, and intermediate phases

In contrast, the viscosity of the SmZA_A in DIO and FNCL919 is significantly higher at a low shear rate of γ˙=2.5\dot{\gamma} = 2.5 s−1^{-1} and lower at a high shear rate of γ˙=500\dot{\gamma} = 500 s−1^{-1} than the viscosities of the neighboring regions of the N and NF_F phases. A similar behavior was reported for the SmZA_A phase by Nishikawa et al.[18] Smectic layers of the SmZA_A between two parallel plates are oriented randomly at a low shear rate, with some of them being orthogonal to the flow, which would yield a high viscosity. At a high γ˙\dot{\gamma}, the layers are mostly parallel to the plates of the rheometer and slide over one another while keeping the average n^\hat{\mathbf{n}} along the shear, which results in a lower viscosity. Note that this behavior is different from the behavior of the SmA phase in 8CB, in which n^\hat{\mathbf{n}} is perpendicular to the layers and η\eta is higher than that of the N phase.[50, 53] The most viscous is the mixture FNCL919, while DIO is the least viscous, despite the fact that the temperature range of the DIO mesophases is lower than that of RM734.

Shear viscosity vs. shear rate

The variation of effective shear viscosity η\eta of all three materials with the shear rate in the range 0.10.1 s−1≤γ˙≤1000^{-1} \leq\dot{\gamma} \leq1000 s−1^{-1} has been explored in the N, NF_F and intermediate phases, Figure 4. All three materials and all three phases show a pronounced shear-thinning at low γ˙<1\dot{\gamma} < 1 s−1^{-1} and almost Newtonian behavior at high γ˙>100\dot{\gamma} > 100 s−1^{-1}. The intermediate range 11 s−1<γ˙<100^{-1} < \dot{\gamma} < 100 s−1^{-1} exhibits a moderate shear-thinning. The shear rate dependencies can be presented by a power law η∝γ˙n−1\eta\propto\dot{\gamma}^{n-1}, in which n<1n < 1 describes a shear-thinning and n=1n = 1 corresponds to the Newtonian flow behavior.

Image not extracted

Figure 4. Variation of effective shear viscosity η\eta of RM734 (a), DIO (b), and FNLC919 (c) with different shear rates γ˙\dot{\gamma} in the N and NF_{\mathrm{F}} and intermediate phases. The red and blue dashed lines are the best fit to the curve, which is done by using a power law for effective shear viscosity.

The measured viscosities of the DIO in the NF_F phase are higher than the one reported previously for a similar range of shear rates in Ref. 18. For example, at 60 °C, η=(0.07−0.09)\eta= (0.07 - 0.09) Pa · s in Figure 3b, Figure 4b for γ˙=(2.5−1000)\dot{\gamma} = (2.5 - 1000) s−1^{-1}, while η=0.04\eta= 0.04 Pa · s in Fig. 4d of Ref. 18, measured at γ˙=2.6\dot{\gamma} = 2.6 s−1^{-1} and 5000 s−1^{-1}. Another notable difference is that all three phases of DIO in Figure 4b show a shear-thinning regime and almost a Newtonian behavior at high shear rates, while Fig. 3 in Ref. 18, reports a change from shear-thinning to shear-thickening regime in the NF_F phase of DIO at γ˙>20\dot{\gamma} > 20 s−1^{-1}, although with an exponent n=1.02n = 1.02 close to 1. A potential reason for these discrepancies is the different thickness of shear cell, 150 μm in our case and 80 μm in Ref. 18.

First-normal stress difference vs. shear rate

The variation of the first-normal stress difference N1N_1 of all three materials as a function of shear rate in the range of 0.10.1 s−1≤γ˙≤1000^{-1} \leq\dot{\gamma} \leq1000 s−1^{-1} has been observed in the N, NF_F and intermediate phases, Figure 5. N1N_1 is the difference between the normal stress along the flow and the normal stress in the orthogonal direction of the velocity gradient. N1N_1 is a measure of the non-Newtonian and elastic behavior of fluids under shear; in Newtonian isotropic fluids, N1=0N_1 = 0. As a rule, isotropic fluids such as polymer solutions, show N1>0N_1 > 0. The reason is that the polymer coils extend along the flow, which creates a restoring force that tends to return the coil to the initial isotropic shape, thus acting to push the plates of the shear device apart, hence N1>0N_1 > 0. It thus came as a surprise that some polymers with orientational order show N1<0N_1 < 0.[54, 55, 56, 57] The qualitative explanation is that in these polymers, a moderate shear causes tumbling of the director n^\hat{\mathbf{n}}, which results in a less ordered structure than that in the absence of shear. All three explored materials show N1<0N_1 < 0 in the N and intermediate phases. The NF_{\mathrm{F}} phase in all materials exhibits a small negative N1N_1 at low shear rates γ˙<10 s−1\dot{\gamma} < 10\ \mathrm{s}^{-1} and a positive N1N_1 at γ˙>100 s−1\dot{\gamma} > 100\ \mathrm{s}^{-1}. The experiment uncovers a dramatic difference in the behavior of N1N_1 between the paraelectric, antiferroelectric and ferroelectric phases. The observed behavior does not fit fully the previously developed models. The available models that explain N1<0N_1 < 0 [58, 59] in the N phase assume that n^\hat{\mathbf{n}} is in the shear plane; as will be clear in the next section, this assumption is valid only at γ˙≤100 s−1\dot{\gamma} \leq100\ \mathrm{s}^{-1}; at higher rates, polydomain structures form and at γ˙≥1000 s−1\dot{\gamma} \geq1000\ \mathrm{s}^{-1}, n^\hat{\mathbf{n}} realigns along the vorticity axis. When n^\hat{\mathbf{n}} deviates from the shear plane,

Image not extracted

Figure 5. First normal stress difference N1N_1 of RM734 (a), DIO (b), and FNLC919 (c) as a function of shear rate γ˙\dot{\gamma} in the N, NF_{\mathrm{F}} and intermediate phases.

forming twisted structures,[60] the available models predict N1>0N_1 > 0.[61, 62]

For the case of the NF_{\mathrm{F}} phase, a small negative N1N_1 at low γ˙\dot{\gamma} can be tentatively attributed to misalignments in the shear plane, but the optical retardance discussed below does not support this idea. At high rates, a positive N1N_1 can be associated with a better alignment of the director as compared to shear-free case; however, there is no significant difference in the optical retardance of the samples in these two regimes. Intriguing behavior of N1N_1 deserves further studies.

Realignment regimes of the N phase under shear

RM734. The response of the N phase at T=150 ∘CT = 150\,^\circ\mathrm{C} to the shear exhibits three regimes, depending on the shear rate. As γ˙\dot{\gamma} increases from 0.75 s−1\mathrm{s}^{-1} to 80 s−1\mathrm{s}^{-1}, initially misaligned n^\hat{\mathbf{n}} progressively realigns toward the shear plane, as evidenced by Figure 6a and by observations with the optical compensator, Supplementary Fig. S1. The realignment of n^\hat{\mathbf{n}} towards the shear

Image not extracted

Figure 6. Structural response of the N phase of RM734 to shear at T=150 ∘CT = 150\,^\circ\mathrm{C} in a 10 μm\mu\mathrm{m} thick cell revealed in the PPM (a) and POM (b,c) modes of observation; the shear rate γ˙\dot{\gamma} is indicated on the textures. (a) Flow-alignment at low γ˙\dot{\gamma} as revealed by PPM with the N compensating cell of a thickness 9.6 μm\mu\mathrm{m}. The color wheel describes the orientation of the optic axis (director) and the ticks in textures show the local orientation of the director. (b) Polydomain textures at the intermediate γ˙\dot{\gamma} as revealed by POM with crossed polarizers and a FWP compensator. The slow axis λg\lambda_g of the FWP shown by a red line is parallel to the shear direction. (c) Progressive realignment of the director towards the vorticity direction at high γ˙\dot{\gamma}. The slow axis λg\lambda_g of the FWP is parallel to the shear direction.

plane indicates a flow-aligning character of RM734 in the N phase at low γ˙\dot{\gamma}. Similar behavior is observed in conventional N materials, such as MBBA, 5CB, E7, and MLC 7026.[13, 14, 63, 64] As n^\hat{\mathbf{n}} remains in the shear plane, the elastic deformations are predominantly of splay-bend type. The relative importance of the viscous and elastic torques is expressed by the Ericksen number Er=ηγ˙h2K1\mathrm{Er} = \frac{\eta\dot{\gamma} h^2}{K_1}, where K1K_1 is the splay elastic constant. Using typical values K1≈2K_1 \approx2 pN at 150 °C,[34] cell thickness h=10−5h = 10^{-5} m, the effective viscosity η=0.04\eta= 0.04 Pa·s at 150 °C, Figure 3a, one estimates Er≈[2 s]γ˙\mathrm{Er} \approx[2\ \mathrm{s}] \dot{\gamma}. In other words, the viscous torques prevail over the elastic ones at any γ˙>0.5\dot{\gamma} > 0.5 s−1^{-1}. As the shear rate increases to γ˙=120\dot{\gamma} = 120 s−1^{-1}, flow starts to produce disclination loops that multiply with the further growth of γ˙\dot{\gamma}, Figure 6b, Supplementary Fig. S2a. In the range 120120 s−1≤γ˙≤1000^{-1} \leq\dot{\gamma} \leq1000 s−1^{-1} the director field is highly distorted, forming disclinations-infused polydomains which become more elongated as γ˙\dot{\gamma} increases, Figure 6b, Supplementary Fig. S2a. The director adopts many different orientations in the plane of the sample. At still higher shear rates, 10001000 s−1≤γ˙≤5000^{-1} \leq\dot{\gamma} \leq5000 s−1^{-1}, the polydomain textures become progressively homogeneous with the director n^\hat{\mathbf{n}} gradually realigning towards the vorticity xx-axis, as evidenced by the predominance of yellow colors in textural observation with an optical compensator in Figure 6c and blue colors in Supplementary Fig. S2b. This regime can be called log-rolling.

DIO and FNLC919. The N phase of DIO and FNLC919 exhibits three similar flow regimes. The director, which is initially misaligned, realigns along the shear plane at low shear rates, 0.750.75 s−1≤γ˙≤80^{-1} \leq\dot{\gamma} \leq80 s−1^{-1} in DIO and 0.750.75 s−1≤γ˙≤50^{-1} \leq\dot{\gamma} \leq50 s−1^{-1} FNLC919, Figure 7a, Supplementary Fig. S3a, S4, S5. Intermediate rates bring about polydomain structures, Figure 7b, Figure S3. The highest shear rates, 600600 s−1≤γ˙≤1000^{-1} \leq\dot{\gamma} \leq1000 s−1^{-1}, reorient n^\hat{\mathbf{n}} along the vorticity xx-axis, Figure 7c, Supplementary Fig. S3c,d, producing a log-rolling regime.

Image not extracted

Figure 7. Structural response of the N phase of DIO to shear at T=110 ∘CT = 110\,^\circ\mathrm{C} in a 10 μm\mu\mathrm{m} thick cell revealed in the PPM modes of observation; the shear rate γ˙\dot{\gamma} is indicated on the textures. (a) Flow-alignment at low γ˙\dot{\gamma} as revealed by PPM with the N compensating cell of a thickness 6.8 μm\mu\mathrm{m}. The color wheel describes the orientation of the optic axis (director) and the ticks in textures show the local orientation of the director. (b) Polydomain textures at the intermediate γ˙\dot{\gamma}. (c) Progressive realignment of the director towards the vorticity direction at high γ˙\dot{\gamma}.

Figure S3. Structural response of the N phase of FNLC919 to shear at T=65 ∘CT = 65\,^\circ\mathrm{C} in a 10 μm10\ \mu\mathrm{m} thick cell revealed in the PPM (a) and POM (b,c,d) modes of observation; the shear rate γ˙\dot{\gamma} is indicated on the textures. (a) Flow-alignment at low γ˙\dot{\gamma} as revealed by PPM with the N compensating cell of a thickness 6.8 μm6.8\ \mu\mathrm{m}. The color wheel describes the orientation of the optic axis (director) and the ticks in textures show the local orientation of the director. (b) Polydomain textures at the intermediate γ˙\dot{\gamma} as revealed by POM with crossed polarizers and a FWP compensator. The slow axis λg\lambda_g of the FWP shown by a red line is parallel to the shear direction. (c,d) Progressive realignment of the director towards the vorticity direction at high γ˙\dot{\gamma}. The slow axis λg\lambda_g of the FWP is parallel to the shear direction in (c) and perpendicular to it in (d).

The observed realignment of the N molecules along the vorticity direction is at odds with the previously reported flow-alignment of the DIO N phase in the shear plane at γ˙>102\dot{\gamma} > 10^2 s−1^{-1}.[18] Note that the structural analysis in Ref. 18 was performed by observations between crossed polarizers; in such a setting, it is difficult to distinguish between two orthogonal directions of the optic axis. Such ambiguity is removed when the observations are performed with optical compensators, Figure 6b,Figure 6c and in the PPM mode, Figure 7.

Realignment regimes of the NF_{\mathrm{F}} phase under shear

RM734 The NF_{\mathrm{F}} realignment under shear is qualitatively similar to that of the N phase, Figure 8. At low shear rates γ˙≤0.75\dot{\gamma} \leq0.75 s−1^{-1}, the flows are not strong enough to streamline polydomain textures. When γ˙\dot{\gamma} increases from 0.750.75 s−1^{-1} to 55 s−1^{-1}, the polydomain texture slowly (within ∼10\sim10 min) transforms into a homogeneous texture with n^\hat{\mathbf{n}} approaching the shear plane, Figure 8a. The NF_{\mathrm{F}} behaves as a flow-aligning material in the range of 55 s−1≤γ˙≤40^{-1} \leq\dot{\gamma} \leq40 s−1^{-1}. Above this range, 4545 s−1≤γ˙≤300^{-1} \leq\dot{\gamma} \leq300 s−1^{-1}, the flow creates a polydomain structure, Figure 8b,Figure 8c. At γ˙≥300\dot{\gamma} \geq300 s−1^{-1}, the shear progressively realigns the optic axis towards the vorticity xx-axis, Figure 8c. The regime is log-rolling when 700700 s−1≤γ˙≤1000^{-1} \leq\dot{\gamma} \leq1000 s−1^{-1}, Figure 8c.

Image not extracted

Figure 8. Structural response of the NF_{\mathrm{F}} phase of RM734 to shear at T=125T = 125 °C in a 10 μm thick cell revealed in the PPM modes of observation; the shear rate γ˙\dot{\gamma} is indicated on the textures. (a) Flow-alignment at low γ˙\dot{\gamma} as revealed by PPM with the N compensating cell of a thickness 11.1 μm. The color wheel describes the orientation of the optic axis (director) and the ticks in textures show the local orientation of the director. (b) Polydomain textures at the intermediate γ˙\dot{\gamma}. (c) Progressive realignment of the director towards the vorticity direction at high γ˙\dot{\gamma}.

DIO and FNLC919. The flow aligns n^\hat{\mathbf{n}} of the NF_{\mathrm{F}} in the shear plane at 33 s−1≤γ˙≤30^{-1} \leq\dot{\gamma} \leq30 s−1^{-1}, Figure 9a, Figure S6. The intermediate range,

Image not extracted

Figure 9. Structural response of the N_F phase of DIO to shear at T=65 ∘CT = 65\,^\circ\mathrm{C} in a 10 μm thick cell revealed in the PPM modes of observation; the shear rate γ˙\dot{\gamma} is indicated on the textures. (a) Flow-alignment at low γ˙\dot{\gamma} as revealed by PPM observation in a cell of a thickness 8.4 μm. The color wheel describes the orientation of the optic axis (director) and the ticks in textures show the local orientation of the director. (b) Polydomain textures at the intermediate γ˙\dot{\gamma}. (c) Progressive realignment of the director towards the vorticity direction at high γ˙\dot{\gamma}.

Figure S6. Structural response of the NF_\mathrm{F} phase of FNLC919 to shear at T=25 ∘CT = 25\,^\circ\mathrm{C} in a 10 μm10\,\mu\mathrm{m} thick cell revealed in the PPM modes of observation; the shear rate γ˙\dot{\gamma} is indicated on the textures. (a) Flow-alignment at low γ˙\dot{\gamma} as revealed by PPM with the N compensating cell of a thickness 9.6 μm9.6\,\mu\mathrm{m}. The color wheel describes the orientation of the optic axis (director) and the ticks in textures show the local orientation of the director. (b) Polydomain textures at the intermediate γ˙\dot{\gamma}. (c) Progressive realignment of the director towards the vorticity direction at high γ˙\dot{\gamma}.

35 s−1≤γ˙≤350 s−135\,\mathrm{s}^{-1} \le\dot{\gamma} \le350\,\mathrm{s}^{-1} in DIO and 35 s−1≤γ˙≤260 s−135\,\mathrm{s}^{-1} \le\dot{\gamma} \le260\,\mathrm{s}^{-1} in FNLC919, produces polydomain textures; the number of domains increases with γ˙\dot{\gamma}, Figure 9b, Figure S6. The director progressively turns towards the vorticity direction at γ˙>350 s−1\dot{\gamma} > 350\,\mathrm{s}^{-1} in DIO and γ˙>260 s−1\dot{\gamma} > 260\,\mathrm{s}^{-1} in FNLC919, Figure 9c, Figure S6. At high shear rates 500 s−1≤γ˙≤1000 s−1500\,\mathrm{s}^{-1} \le\dot{\gamma} \le1000\,\mathrm{s}^{-1}, n^\hat{\mathbf{n}} is along the vorticity xx-axis, Figure 9c, Figure S6.

The observed realignment of the NF_\mathrm{F} molecules along the vorticity direction contradicts the previously reported flow-alignment of the DIO NF_\mathrm{F} phase in the shear plane at γ˙>102 s−1\dot{\gamma} > 10^{2}\,\mathrm{s}^{-1}.[18] As mentioned before, the textures in Figure 8,9, recorded in the PPM mode, allow one to unambiguously determine the direction of the optic axis and polarization along the vorticity direction.

Director orientation under shear

To quantify the effect of flows on the director structures, we measure the optical retardance Γ\Gamma as a function of shear rate in the N and NF_\mathrm{F} phases, Figure 10a,Figure 10b,Figure 10c. In a separate experiment, we measured the retardance Γmax⁡=Δn×h\Gamma_{\max} = \Delta n \times h of planar cells of the same thickness h=10 μmh = 10\,\mu\mathrm{m} as the rheometer gap, in the absence of shear; Δn=ne−no\Delta n = n_\mathrm{e} - n_\mathrm{o} is the birefringence of material, nen_\mathrm{e} and non_\mathrm{o} are the extraordinary and ordinary refractive indices, respectively. The Γmax⁡\Gamma_{\max} values are shown as dashed lines in Figure 10a,Figure 10b,Figure 10c. In the N phase of RM734 at 150 ∘C150\,^\circ\mathrm{C}, Δn=0.195\Delta n = 0.195 (measured at λ=655 nm\lambda= 655\,\mathrm{nm})[65] and Γmax⁡=1950 nm\Gamma_{\max} = 1950\,\mathrm{nm}. The N phase of DIO and FNLC919 show Γmax⁡=1540 nm\Gamma_{\max} = 1540\,\mathrm{nm} at 110 ∘C110\,^\circ\mathrm{C} and 1500 nm1500\,\mathrm{nm} at 65 ∘C65\,^\circ\mathrm{C}, respectively (λ=655 nm\lambda= 655\,\mathrm{nm}), Figure 11a,Figure 11b. These values are assumed as corresponding to the director parallel to the bounding plates; the effects of a small (on the order of 1∘1^\circ) pretilt angle are neglected.

Shear rate dependence of effective retardance and flow-alignment angle

Figure 10. Shear rate dependence of effective retardance Γ\Gamma measured by PolScope Microimager for RM734 (a), DIO (b), FNLC919 (c), and flow-alignment angle θ0\theta_0 of RM734 (d), DIO (e), and FNLC919 (f) in the N and NF_F phases; error bars are standard deviations. The dashed red lines indicate the maximum possible retardance Γmax⁡\Gamma_{\max} of a planar cell of 10-μm thickness in the absence of shear. Γ\Gamma of RM734 is measured at λ=655\lambda= 655 nm in the N phase and λ=535\lambda= 535 nm in the NF_F phase. Γ\Gamma of DIO and FNLC919 are measured at λ=655\lambda= 655 nm in the N and NF_F phases.

Temperature dependence of birefringence and refractive indices of DIO and FNLC919

Figure 11. Temperature dependence of birefringence Δn\Delta n of DIO (a) and FNLC919 (b) measured by PolScope Microimager at wavelengths 475 nm, 535 nm, 655 nm, and temperature dependence of the refractive indices of DIO (c) and FNLC 919 (d) measured by an interference technique using a wedge cell at wavelength 633 nm.

  • N phase.* In the N phase of all materials, at low shear rates, γ˙≤100 s−1\dot{\gamma} \le100\,\mathrm{s}^{-1}, Γ<Γmax⁡\Gamma< \Gamma_{\max}, Figure 10a,Figure 10b,Figure 10c. The result is natural for a flow-aligning behavior since n^\hat{\mathbf{n}} in the shear plane tilts away from the horizontal flow direction by some angle θ\theta. For example, in the flow-aligning nematics MBBA and 5CB, θ=(7−15)∘\theta= (7 - 15)^\circ.[66, 67, 68]

When n^\hat{\mathbf{n}} makes an angle θ(z)\theta(z) with the yy-axis in the flow-alignment regime, Γ=∫z=0z=h(nenone2sin⁡2θ(z)+no2cos⁡2θ(z)−no)dz\Gamma= \int_{z=0}^{z=h} \left(\frac{n_\mathrm{e}n_\mathrm{o}}{\sqrt{n_\mathrm{e}^{2}\sin^{2}\theta(z)+n_\mathrm{o}^{2}\cos^{2}\theta(z)}} - n_\mathrm{o}\right)\mathrm{d}z. In a flow-aligning N, it is safe to assume that θ(z)=θ0\theta(z) = \theta_0 everywhere except in the thin subsurface layers where the anchoring-imposed orientation persists.[66, 67, 68, 69, 70] We obtained nen_\mathrm{e} and non_\mathrm{o} for RM734 from Ref. 16 and measured the values for DIO and FNLC919, Figure 11c,Figure 11d, using a wedge-cell interference technique.[71] Using the values of hh, nen_\mathrm{e} and non_\mathrm{o}, we determine θ0\theta_0 to be in the range (10(10-15)∘15)^\circ in the flow-aligning regime, Figure 10d,Figure 10e,Figure 10f. These results are close to what was previously measured in flow-aligning MBBA and 5CB.[66, 67, 69] In the range 100 s−1≤γ˙≤2000 s−1100\,\mathrm{s}^{-1} \le\dot{\gamma} \le2000\,\mathrm{s}^{-1} for RM734 and 100 s−1≤γ˙≤500 s−1100\,\mathrm{s}^{-1} \le\dot{\gamma} \le500\,\mathrm{s}^{-1} for DIO and FNLC919, the polydomain texture yields only some effective Γ\Gamma since the director field is strongly distorted; twist and light scattering at the defects, Figure 6b, Supplementary Figure 2a, also diminish reliability of the Γ\Gamma data. At very high shear rate, γ˙>2000 s−1\dot{\gamma} > 2000\,\mathrm{s}^{-1} for RM734 and γ˙>500 s−1\dot{\gamma} > 500\,\mathrm{s}^{-1} for DIO and FNLC919, when n^\hat{\mathbf{n}} is along the vorticity axis, Γ\Gamma becomes practically equal to Γmax⁡\Gamma_{\max}, Figure 10a,Figure 10b,Figure 10c. There is thus no significant departure of n^\hat{\mathbf{n}} from the planar state in the log-rolling regime.

NFN_F phase. At low shear rates, in the flow-aligning regime, all three materials in the NFN_F phase show Γ=Γmax⁡\Gamma= \Gamma_{\max}, Figure 10a,Figure 10b,Figure 10c. For example, for RM734, Γ=Γmax⁡≈2550\Gamma= \Gamma_{\max} \approx2550 nm (at λ=535\lambda= 535 nm) for a 10 μ\mum thick homogeneous planar sample at 125 °C.[65] It means that the optical axis (and thus the polarization PP) does not deviate from the flow direction, in a stark contrast to the behavior in the N. The tilt of PP at the bounding surfaces and splay of PP in the bulk create bound charges and increases the electrostatic energy.[4, 72] This electrostatic mechanism explains the difference in the flow-alignment of the NFN_F and N. At very high shear rates, in the log-rolling regime, one also observes Γ=Γmax⁡\Gamma= \Gamma_{\max}, which means that PP avoids tilts and splay, but is now oriented along the vorticity xx-axis. At intermediate shear rates, the retardance of the NFN_F phase is much lower than Γmax⁡\Gamma_{\max}, Figure 10a,Figure 10b,Figure 10c. The reason is the strong director distortions, with a prominent presence of twist along the velocity gradient zz-axis. The twist is evident in POM observations with decrossed polarizers, Figure 12: regions 1, 2, and 3 show different colors when the analyzer is rotated clockwise, Figure 12a, and then quickly (0.5 s) rotated counterclockwise by the same angle, Figure 12c.

Twisted domains of the sheared sample RM734 in the NF phase

Figure 12. Twisted domains of the sheared sample RM734 in the NF phase at γ˙=100 s−1\dot{\gamma}=100\ \mathrm{s}^{-1}. [(a)–(c)] POM textures with the polarizer and analyzer making angles of 120°, 90°, and 60°, respectively. 10 μ\mum thick sample and T=125T=125 °C.

Conclusions

We performed comparative analysis of the paraelectric N, ferroelectric NF_\mathrm{F}, and antiferroelectric intermediate phases in three liquid crystal materials, RM734, DIO and FNLC919. As expected, the effective shear viscosity in all phases increases as the temperature decreases, demonstrating the Arrhenius's behavior except near the phase transition temperature. All three materials exhibit a strong shear-thinning behavior at low shear rates, 0.1 s−1≤γ˙<10 s−10.1\ \mathrm{s}^{-1}\leq\dot{\gamma}<10\ \mathrm{s}^{-1} and a nearly Newtonian flow behavior at γ˙>100 s−1\dot{\gamma}>100\ \mathrm{s}^{-1}. Shear-thinning is especially pronounced in the antiferroelectric phase, which is caused by its layered structure and progressive alignment of the layers under the shear. The same feature produces a dramatic difference in the effective viscosity measured at a constant temperature for two different shear rates: a low shear rate, 2.5 s−12.5\ \mathrm{s}^{-1}, does not align the layers well and the effective viscosity is very high, while high shear rate of 500 s−1500\ \mathrm{s}^{-1} aligns the layers well and the effective viscosity becomes even lower than that of the N and NF_\mathrm{F} phases, Figure 3b,Figure 3c.

The first-normal stress difference N1N_1 shows an intriguing behavior, being negative in the N and intermediate phases, but changing from a small negative to a large positive value in the NF_\mathrm{F} phase as γ˙\dot{\gamma} increases. The behavior does not fit the available models developed for the N phase.

The structural response to the shear in both N and NF_\mathrm{F} shows three distinct regimes. (I) Flow-alignment at low shear rates γ˙\dot{\gamma} <102 s−1< 10^{2}\,\mathrm{s}^{-1}, with the director in the shear plane, making an angle (10−15)∘(10 - 15)^\circ with the flow direction in the N and 0∘0^\circ in the NF_{\mathrm{F}}. (II) Polydomain textures with strong director deformations, including twists, at intermediate shear rates. (III) Log-rolling at high shear rates γ˙>103 s−1\dot{\gamma} > 10^{3}\,\mathrm{s}^{-1}, in which the director in the N and the polarization P\mathbf{P} in the NF_{\mathrm{F}} are parallel to the vorticity direction. The absence of tilts and splay deformations in the flow-aligning and log-rolling regimes is rooted in the electrostatic properties of the NF_{\mathrm{F}} phase, which avoids creation of surface and bulk space charges. The uncovered rheological properties and structural dynamics under shear would be useful for a better understanding of the NF_{\mathrm{F}} materials and their potential applications in microfluidic devices.

Author contributions

A.C.D. performed the experiments, analyzed the data, and wrote the manuscript. S.P. performed the refractive index measurements, analyzed the results, and contributed to writing that section. O.D.L. conceived the idea, supervised the overall research, and contributed to writing the manuscript.

Conflicts of interest

There are no conflicts to declare.

Data availability

All data needed to evaluate the conclusions in the paper are present in the article and in the Supplementary Figures. The datasets generated during and/or analyzed during this study are available from the corresponding author on request.

Acknowledgements

The authors thank Merck KGaA, Darmstadt, Germany for providing the material FNLC919 and Dr. Hari Krishna Bisoyi and Organic Synthesis Facility at the AMLCI for the synthesis and purification of DIO. The work was supported by NSF grant DMR-2341830.

Supplementary Information

Figure S1. Structural change of RM734 with an increasing shear rate in the N phase, as revealed by POM with crossed polarizers and FWP’s slow axis λg\lambda_{g} aligned (a) parallel to the shear direction, and (b) perpendicular to it; a 10 μ\mum thick sample and T=150T = 150 °C. Shear realigns the director toward the shear plane.

Structural response of the N phase of RM734 to shear at $T = 150\,^\circ\mathrm{C}$

Figure S2. Structural response of the N phase of RM734 to shear at T=150 ∘CT = 150\,^\circ\mathrm{C} in a 10 μ\mum thick cell revealed in the POM (a,b) mode of observation; the shear rate γ˙\dot{\gamma} is indicated on the textures (a) A web of disclinations observed with a single polarizer. (b) Progressive realignment of the director towards the vorticity direction at high γ˙\dot{\gamma}. The slow axis λg\lambda_g of the FWP is perpendicular to the shear direction.

Figure S4. Structural change of DIO with an increasing shear rate in the N phase, as revealed by POM with crossed polarizers and FWP’s slow axis λg\lambda_g aligned (a) parallel to shear direction, and (b) perpendicular to it; a 10 μm thick sample and T=110 ∘CT = 110\,^{\circ}\mathrm{C}. Shear realigns the director toward the shear plane.

Figure S5. The realignment of the director orientation of FNLC919 along the flow in the N phase with an increasing shear rate, as revealed by POM with crossed polarizers and FWP’s slow axis λg\lambda_g aligned (a) parallel to shear direction, and (b) perpendicular to it; a 10 μm thick sample and T=65 ∘CT = 65\,^{\circ}\mathrm{C}.

References

  1. [1]R. J. Mandle, S. J. Cowling and J. W. Goodby, Physical Chemistry Chemical Physics, 2017, 19, 11429-11435.
  2. [2]H. Nishikawa, K. Shiroshita, H. Higuchi, Y. Okumura, Y. Haseba, Y. Yamamoto, K. Sago and H. Kikuchi, Advanced Materials, 2017, 29, 1702354.
  3. [3]N. Sebastián, L. Cmok, R. J. Mandle, M. R. de la Fuente, I. D. Olenik, M. Copic and A. Mertelj, Physical Review Letters, 2020, 124, 037801.
  4. [4]X. Chen, E. Korblova, D. P. Dong, X. Y. Wei, R. F. Shao, L. Radzihovsky, M. A. Glaser, J. E. Maclennan, D. Bedrov, D. M. Walba and N. A. Clark, Proceedings of the National Academy of Sciences of the United States of America, 2020, 117, 14021-14031.
  5. [5]P. G. de Gennes and J. Prost, The Physics of Liquid Crystals, Clarendon Press, Oxford, 1993.
  6. [6]M. Kleman and O. D. Lavrentovich, Soft matter physics: an introduction, Springer, 2003.
  7. [7]A. N. Beris and B. J. Edwards, Thermodynamics of flowing systems: with internal microstructure, Oxford University Press, New York, 1994.
  8. [8]R. G. Larson, The structure and rheology of complex fluids, Oxford University Press, New York, 1999.
  9. [9]P. Oswald and P. Piersanski, Nematic and cholesteric liquid crystals: concepts and physical properties illustrated by experiments, Taylor & Francis, Boca Raton, 2005.
  10. [10]T. Carlsson and K. Skarp, Liquid Crystals, 1986, 1, 455-471.
  11. [11]Piersank.P and E. Guyon, Physical Review A, 1974, 9, 404-417.
  12. [12]I. Zuniga and F. M. Leslie, Liquid Crystals, 1989, 5, 725-734.
  13. [13]D. J. Graziano and M. R. Mackley, Molecular Crystals and Liquid Crystals, 1984, 106, 103-119.
  14. [14]P. Mather, D. Pearson and R. Larson, Liquid crystals, 1996, 20, 527-538.
  15. [15]P. T. Mather, D. S. Pearson and R. G. Larson, Liquid Crystals, 1996, 20, 539-546.
  16. [16]B. Basnet, S. Paladugu, O. Kurochkin, O. Buluy, N. Aryasova, V. G. Nazarenko, S. V. Shiyanovskii and O. D. Lavrentovich, Nature Communications, 2025, 16, 1444.
  17. [17]M. P. Kumar, J. Karcz, P. Kula, S. Karmakar and S. Dhara, Physical Review Applied, 2023, 19, 044082.
  18. [18]H. Nishikawa, P. Salamon, M. T. Máthé, A. Jákli and F. Araoka, Giscant, 2025, 22, 100356.
  19. [19]J. S. Yu, J. H. Lee, J. Y. Lee and J. H. Kim, Soft Matter, 2023, 19, 2446-2453.
  20. [20]A. Manabe, M. Bremer and M. Kraska, Liquid Crystals, 2021, 48, 1079-1086.
  21. [21]S. Brown, E. Cruickshank, J. M. D. Storey, C. T. Imrie, D. Pociecha, M. Majewska, A. Makal and E. Gorecka, ChemPhysChem, 2021, 22, 2506-2510.
  22. [22]A. Erkoçeka, A. Mertelj, M. Huang, S. Aya, N. Sebastián and J. Martinez-Perdiguero, Journal of Chemical Physics, 2023, 159, 184502.
  23. [23]P. Nacke, A. Manabe, M. Klasen-Memmer, X. Chen, V. Martinez, G. Freychet, M. Zhernenkov, J. E. Maclennan, N. A. Clark, M. Bremer and F. Giesselmann, Scientific Reports, 2024, 14, 4473.
  24. [24]J. Thoen, G. Cordoyiannis, E. Korblova, D. M. Walba, N. A. Clark, W. Jiang, G. H. Mehl and C. Glorieux, Physical Review E, 2024, 110, 014703.
  25. [25]Y. H. Song, J. X. Li, R. L. Xia, H. Xu, X. X. Zhang, H. Y. Lei, W. F. Peng, S. Q. Dai, S. Aya and M. J. Huang, Physical Chemistry Chemical Physics, 2022, 24, 11536-11543.
  26. [26]J. Karcz, N. Rychlowicz, M. Czarnecka, A. Kocot, J. Herman and P. Kula, Chemical Communications, 2023, 59, 14807-14810.
  27. [27]E. Cruickshank, P. Rybak, M. M. Majewska, S. Ramsay, C. Wang, C. H. Zhu, R. Walker, J. M. D. Storey, C. T. Imrie, E. Gorecka and D. Pociecha, Acs Omega, 2023, 8, 36562-36568.
  28. [28]C. J. Gibb, J. Hobbs, D. I. Nikolova, T. Raistrick, S. R. Berrow, A. Mertelj, N. Osterman, N. Sebastian, H. F. Gleeson and R. J. Mandle, Nature Communications, 2024, 15, 5845.
  29. [29]P. Nacke, R. Tuffin, M. Klasen-Memmer, P. Rudquist and F. Giesselmann, Scientific Reports, 2024, 14, 15018.
  30. [30]N. Sebastián, M. Copic and A. Mertelj, Physical Review E, 2022, 106, 021001.
  31. [31]H. Nishikawa, Y. Okumura, D. Kwaria, A. Nihonyanagi and F. Araoka, Advanced Materials, 2025, 37, 2501946.
  32. [32]X. Chen, V. Martinez, E. Korblova, G. Freychet, M. Zhernenkov, M. A. Glaser, C. Wang, C. H. Zhu, L. Radzihovsky, J. E. Maclennan, D. M. Walba and N. A. Clark, Proceedings of the National Academy of Sciences of the United States of America, 2023, 120, e2217150120.
  33. [33]P. M. Rupnik, E. Hanzel, M. Lovsin, N. Osterman, C. J. Gibb, R. J. Mandle, N. Sebastián and A. Mertelj, Advanced Science, 2025, 12, 2414818.
  34. [34]A. Mertelj, L. Cmok, N. Sebastián, R. J. Mandle, R. R. Parker, A. C. Whitwood, J. W. Goodby and M. Copic, Physical Review X, 2018, 8, 041025.
  35. [35]Z. J. Ma, M. Jiang, A. L. Sun, S. Z. Yi, J. D. Yang, M. J. Huang, S. Aya and Q. H. Wei, Physical Review Letters, 2025, 134, 238101.
  36. [36]A. Ghimire, B. Basnet, H. Wang, P. Guragain, A. Baldwin, R. Twieg, O. D. Lavrentovich, J. Gleeson, A. Jákli and S. Sprunt, Soft Matter, 2025, 21, 8510-8522.
  37. [37]K. Thapa, O. S. J. Ladowska, B. Basnet, H. Wang, A. Paul, J. T. Gleeson and O. D. Lavrentovich, Physical Review E, 2024, 109, 054702.
  38. [38]A. Paul, M. Paul, M. Badu, A. Ghimire, N. P. Dhakal, S. Sprunt, A. Jákli and J. T. Gleeson, Materials, 2025, 18, 5496.
  39. [39]M. Rajabi, O. Lavrentovich and M. Shribak, Liquid Crystals, 2023, 50, 181-190.
  40. [40]M. Shribak, Scientific Reports, 2015, 5, 17340.
  41. [41]J. M. Beckers, Applied Optics, 1971, 10, 973-975.
  42. [42]A. B. Mahler, S. McClain and R. Chipman, Applied Optics, 2011, 50, 755-765.
  43. [43]M. Ma, S. G. Li, X. L. Jing and H. L. Chen, Optical Engineering, 2017, 56, 117109.
  44. [44]R. Oldenbourg, Nature, 1996, 381, 811-812.
  45. [45]M. Shribak and R. Oldenbourg, Applied Optics, 2003, 42, 3009-3017.
  46. [48]K. Negita, Chemical Physics Letters, 1995, 246, 353-357.
  47. [49]K. Negita, Journal of Chemical Physics, 1996, 105, 7837-7841.
  48. [50]K. Negita and S. Uchino, Molecular Crystals and Liquid Crystals, 2002, 378, 103-112.
  49. [51]X. Chen, E. Korblova, M. A. Glaser, J. E. Maclennan, D. M. Walba and N. A. Clark, Proceedings of the National Academy of Sciences of the United States of America, 2021, 118, e2104092118.
  50. [52]X. Chen, Z. C. Zhu, M. J. Magrini, E. Korblova, C. S. Park, M. A. Glaser, J. E. Maclennan, D. M. Walba and N. A. Clark, Liquid Crystals, 2022, 49, 1531-1544.
  51. [53]K. Negita, M. Inoue and S. Kondo, Physical Review E, 2006, 74, 051708.
  52. [54]G. Kiss and R. S. Porter, Journal of Polymer Science Part C-Polymer Symposium, 1978, 65, 193-211.
  53. [55]G. Kiss and R. S. Porter, Molecular Crystals and Liquid Crystals, 1980, 60, 267-280.
  54. [56]A. D. Gotsis and D. G. Baird, Rheologica Acta, 1986, 25, 275-286.
  55. [57]S. G. Baek, J. J. Magda and S. Cementwala, Journal of Rheology, 1993, 37, 935-945.
  56. [58]G. Marrucci and P. L. Maffettone, Macromolecules, 1989, 22, 4076-4082.
  57. [59]P. K. Currie, Molecular Crystals and Liquid Crystals, 1981, 73, 1-6.
  58. [60]T. Tsuji and A. D. Rey, Physical Review E, 1998, 57, 5609-5625.
  59. [61]W. H. Han and A. D. Rey, Journal of Non-Newtonian Fluid Mechanics, 1993, 48, 181-210.
  60. [62]W. H. Han and A. D. Rey, Physical Review E, 1994, 49, 597-613.
  61. [63]P. J. M. Vanbrabant, L. Beeckman, K. Neyts, R. James and F. A. Fernandez, Applied Physics Letters, 2009, 95, 151108.
  62. [64]H. Y. Wang, T. X. Wu, S. Gauza, J. R. Wu and S. T. Wu, Liquid Crystals, 2006, 33, 91-98.
  63. [65]P. Kumari, B. Basnet, H. Wang and O. D. Lavrentovich, Nature Communications, 2023, 14, 748.
  64. [66]C. Gahwiller, Physical Review Letters, 1972, 28, 1554.
  65. [67]K. Skarp, S. T. Lagerwall, B. Stebler and D. McQueen, Physical Scripta, 1979, 19, 339-342.
  66. [68]W. W. Beens and W. H. Dejeu, Journal of Chemical Physics, 1985, 82, 3841-3846.
  67. [69]J. H. W. Fischer, Molecular Crystals and Liquid Crystals, 1973, 22, 359-373.
  68. [70]J. A. Muller, R. S. Stein and H. H. Winter, Rheologica Acta, 1994, 33, 473-484.
  69. [71]J. Kędzierski, Z. Raszewski, M. A. Kojdecki, E. Kruszelnicki-Nowinowski, P. Perkowski, W. Piecek, E. Miszczyk, J. Zieliński, P. Morawiak and K. Ogrodnik, Opto-Electronics Review, 2010, 18, 214-218.
  70. [72]L. Paik and J. Selinger, Physical Review E, 2025, 111, L053402.

Paper details

vlnc:W_fp46ddb9
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents