betaFeedback

WorksPhysics and Astronomy

A tensorial approach to 'altermagnetism'

Abstract

I present a tensorial approach to the description of k⃗/−k⃗\vec{k}/-\vec{k}-symmetric, time-reversal-odd splitting of electronic bands in magnetic materials, which can be of non-relativistic origin and was recently given the name of `altermagnetism'. I demonstrate that tensors provide a general framework to discuss magnetic symmetry using both spin groups and magnetic point groups, which have often been contrasted in recent literature. I also provide a natural classification of altermagnets in terms of the lowest-order tensorial forms that are permitted in each of the 69 altermagnetic point groups. This approach clarifies the connection between altermagnetism and well-known bulk properties, establishing that the vast majority of altermagnetic materials must also be piezomagnetic and MOKE-active, and provides a rational criterion to search for potential altermagnets among known materials and to test them when the magnetic structure is unknown or ambiguous.

Introduction

In the past two decades, there has been a resurgence of interest in compounds having electronic bands with lifted spin degeneracy, partly motivated by the requirement of new materials for spintronics. In addition to spin polarisation in ferromagnets, it is well known that spin degeneracy can be lifted even in non-magnetic materials by the famous Rashba-Dresselhaus (R-D) effect,[1, 2] which requires spin-orbit coupling (SOC) and is therefore largest in the presence of heavy elements. The R-D effect also requires the absence of inversion symmetry,[3, 4] due either to the bulk crystal structure being acentric or to symmetry breaking at interfaces.

Starting from 2019, several groups came to the surprising realisation that spin degeneracy can also be lifted in some fully compensated antiferromagnets (AFM) (including collinear AFM), due to the interaction between electron spins and the ‘effective Zeeman field’ (largely of magnetic exchange origin) produced by ordered magnetic moments. This effect is clearly distinct from the R-D effect (most notably, it is kk / −k-k symmetric) and, crucially, does not require SOC, opening the possibility to observe large spin splitting even in light-element compounds. In these cases, the topology of the associated electronic structures gives rise to macroscopic properties, such as the anomalous Hall effect, that are usually associated with ferromagnets. Šmejkal et al. were among the first to realise this in the context of the spontaneous Hall effect.[5] Šmejkal et al.[5] and Ahn et al.[6] independently discussed the case of RuO2_2, which was later to become the ‘poster child’ for this emerging research field. More or less at the same time, Naka et al. described how spin currents can be generated in an organic collinear AFM (κ\kappa-Cl) due to a very similar underlying mechanism.[7, 8] Later, the same group focussed specifically on spin splitting in momentum space, which is interpreted as arising from ordering of microscopic multipoles;[9, 10, 11] they also demonstrated that spin current generation, promoted by site-dependent anisotropic electronic transfer, can occur in simple inorganic compounds such as certain perovskites.[12]. Using Density Functional Theory (DFT), Yuan et al. demonstrated spin splitting at ‘atomic-like energy scales’ in the light-element insulator MnF2_2,[13] which is a fully compensated collinear AFM. Although insulators provide excellent proofs of principle, applications of AFM-induced spin splitting for spintronics would be greatly facilitated by the discovery of metallic systems displaying this effect. The same group later proposed a rational criterion to search for such materials among both collinear and non-collinear AFM, and investigated the electronic structure of several candidates by DFT.[14] Building on their earlier work and using DFT calculations, Šmejkal et al. demonstrated large spin splitting in the absence of SOC in several metallic/semiconducting candidates, including RuO2_2, CrSb and MnTe,[15, 16, 17] These authors pioneered the use of spin group analysis (see below) to define and delimit the relevant phenomenology in collinear AFM, and coined the term ‘altermagnetism’ to mark the distinction between non-spin-split AFM, ordinary spin-split ferromagnets with uniform uncompensated spin splitting and these materials, which display alternating compensated spin splitting.

This terminology has been widely used in subsequent literature, which includes both theoretical[18, 19, 20] and experimental[21, 22, 23, 24, 25, 26] contributions. However, throughout the literature, different authors employ somewhat different definitions of altermagnetism.27 Šmejkal’s emphasis was very much on collinear metallic antiferromagnets, for which spin-splitting effects should be stronger, DFT is much easier to perform, and which may have advantages for certain spintronic applications. However, Yuan et al.[14] and, more recently, Cheong and Huang[20] showed that altermagnetic-like spin textures can also be expected in many non-collinear magnets, which may present distinct practical advantages and should not be excluded a priori.

From the very beginning, symmetry analysis has been recognised as an essential tool of this research fields, since the guiding principle to select potentially altermagnetic materials must lie in their underlying symmetry properties. Yuan et al.[13] proposed an approach based on magnetic space groups (MSG), while Šmejkal et al. proposed the so-called spin groups (SGs)[16, 28, 29], which allow for extra (approximate) symmetries to be considered when spins and the lattice are nearly decoupled (see below). Cheong propose a classification based on magnetic point groups (MPGs)[20], while Liu et al.[18] employ little co-groups at specific points of the Brillouin zone (BZ), and propose a classification that also includes higher-order effects (quartic altermagnetism).

The interest in altermagnetism in non-collinear magnetic structures[20] and in ‘weak-altermagnetic’ effects[26] undoubtedly requires an extension of the SG approach as employed in ref.[16] [30] MPGs are a flexible tool to deal with these cases, especially since there is no reason to expect that altermagnetic splitting should always be weak for non-collinear structures. Intuitively, a classification based on MPGs should be entirely adequate, since spin splitting ultimately results in anomalous macroscopic properties (e.g., the anomalous spin Hall effect) that are subjected to MPG symmetry constraints via the Neumann’s principle.31 However, one should not lose sight of the advantages of SGs when it comes to pseudo-symmetric structures, i.e., when the crystal symmetry is only ‘slightly’ broken upon magnetic ordering.32 It seems fair to state that, in previous work, the link between MPGs, SGs and the complexity of spin textures in reciprocal space has not been entirely clarified.

Here, I propose an approach based on the complete expansion of altermagnetic spin textures in momentum space in terms of Cartesian and spherical tensors. This approach can be equally applied to vectorial textures (described by MPGs) and scalar textures (described by binary SGs, referred to simply as as SGs in the remainder), though my emphasis will initially be on the former. Starting from a working definition of ‘altermagnetic textures’ as being simply those that are k/−kk/-k-symmetric and time reversal odd, I demonstrate that, to any given order, the expansion of vectorial altermagnetic textures is described by a single Cartesian tensor of odd rank, while R-D (k/−kk/-k-antisymmetric, time-reversal even) vectorial magnetic textures are described by even-ranked tensors. I also propose a natural classification of such textures based on the lowest-order tensor forms allowed in a particular set of MPGs (class), and show that the vast majority of altermagnetic point groups (66 out of 69) display quadratic (rank-3) altermagnetism, with the remaining three groups allowing quartic (rank-5) altermagnetism. For the case of collinear AFM structures, I demonstrate that, in most cases, SG scalar textures correspond to the component of the MPG vector magnetic textures along the direction of the staggered magnetisation, while the MPG approach also produces a pattern of ‘weak altermagnetic’ textures in other directions. One notable exception is represented by cubic groups, since the pseudo-cubic symmetry introduces constrains between texture components that would otherwise be independent. For these cubic groups, I provide a conversion table between SG and MPG textures for various direction of the magnetic moments, so that one could remain entirely within the MPG framework, generally the more familiar to the magnetism community. Performing the MPG and SG analyses in parallel has the distinct advantage of clearly separating the components of the textures that do and do not depend on the direction of the staggered magnetisation, which generally have very different energy scales.

One important practical implication of the tensor approach is the connection with macroscopic properties: materials displaying quadratic altermagnetism (66 out of 69 MPGs) must also allow the piezomagnetic effect and the magneto-optical Kerr effect (MOKE) — two easily-testable phenomena that have been known for several decades[33, 34], and for which extensive materials databases are available (for example, ref. 35). Testing for the presence of these effects might also facilitate the screening of candidate altermagnetic materials before more complex experiments are performed to to measure AFM-induced spin splitting of electronic bands directly.

This paper is organised as follows: in secs. II, III and IV, I present a general tensorial treatment of spin textures in momentum space, which can be applied to both altermagnetic and R-D-type textures. In sec. IV, I also outline how a parallel treatment for vector and scalar textures, described by MPGs and binary SGs respectively, and show that dealing with the latter is greatly facilitated if one employs time reversal (via Shubnikov groups) instead of 2-fold rotations. In secs. V, VI and VII, I establish which altermagnetic tensor forms are allowed by symmetry and propose a classification of MPGs based on the lowest-rank altermagnetic tensors. Additional symmetry constraints at special points in reciprocal space are discussed in sec. VIII. Up to this point, no distinction is made between strong and weak effects, in keeping with the classical Neumann approach. In secs. IX and X, I discuss the special case of collinear structures and explain how the dominant components of the spin textures, which are expected to be parallel to the Néel vector, can be extracted from the tensors. In sec. XI, I explain the necessity of employing SGs (which I do via tensorial analysis) for systems that are crystallographically cubic and in which symmetry is only broken upon magnetic ordering, whilst also discussing the application of spin groups to cases in which the magnetic symmetry is very low. Numerous examples in different symmetries are presented in sec. XII, including graphical depictions of several types of spin textures. The paper is concluded by a summary and general discussion (sec. XIII).

The tensorial description

The starting point to develop a tensorial description of altermagnetism and, more generally, of spin splitting of electronic bands, is the expansion in Cartesian tensors of the reciprocal-space spin textures, i.e., the vector field of spin states in momentum space. This semicollinear vector field, which I will denote as Bieff(k,m)B_i^{eff}(\mathbf{k},m), determines both the direction of the spin quantisation axis and the strength of the spin splitting/polarisation, and depends both on the wavevector k\mathbf{k} and on the band index mm.1

Bieff(k,m)=∑l=nn+1Ti,αβγ…(l)kαkβkγ…(1)B_i^{eff}(\mathbf{k},m)=\sum_{l=n}^{n+1}T_{i,\alpha\beta\gamma\ldots}^{(l)}k_\alpha k_\beta k_\gamma\ldots \tag*{(1)}

The Cartesian tensors Ti,αβγ(l)T_{i,\alpha\beta\gamma}^{(l)} is of rank ll and depends on k=∣k∣k=|\mathbf{k}| and on the band index mm. In Eq. (1), repeated indices are implicitly summed, and the tensor is fully symmetric over the Greek indices.

The expression in eq. (1) is directly derived from to the expansion of the spin texture into spherical tensors, and is therefore complete on each spherical shell in momentum space (or sections thereof near the BZ boundary). In fact, one can show (see Appendix A1) that the sum of two Cartesian tensors of ranks nn and n+1n+1 is identical to the expansion of the vector field BieffB_i^{eff} onto a spherical basis up to Γ1⊗Γn\Gamma^1\otimes\Gamma^n, where Γn\Gamma^n is the irreducible representation (irrep) of the group SO(3) with L=nL=n and “⊗\otimes” is the tensor product of representations. Note that higher-rank Cartesian tensors need not be necessarily small — in fact, reproducing the spin texture, especially near the BZ boundary, may require a high-order expansion. Nevertheless, as I will show in the remainder, a very natural classification can be obtained by considering only low-rank Cartesian tensors.

In the presence of (proper and improper) rotational symmetry combined with time reversal symmetry in an MPG, the tensor forms in eq. (1) are constrained by the requirement that the spin textures have at least the symmetry of the MPG of the crystal, which implies that the tensors themselves must be totally symmetric by all the MPG operations — in other words, the tensors must transform like the totally symmetric irrep of the MPG (see Appendix A 2).

Hence, for a given tensor rank, tensors at all values of kk have the same general form (imposed by symmetry) and their kk dependence is described in terms of a reduced number of scalar functions, corresponding to the free parameters of that tensor form. Additional constraints will occur at the Γ\Gamma point (zone centre), at band crossing points and at special points at the boundary of the BZ with non-trivial little-group symmetry.

When considering inversion (parity) and time reversal symmetries specifically, in the expansion in eq. (1) one can immediately distinguish between even-rank tensors, which are time reversal even and parity odd, and odd-rank tensors, which are time-reversal odd and parity even. Once again, it is important to emphasise that only two Cartesian tensor are required for a truncated spherical tensor expansions, and that all effects allowed by lower-rank tensor are automatically included in higher-rank tensors of the same parity. For example, the rank-2 tensor is at linear order in kk and corresponds to the usual Rashba-Dresselhaus (R-D) effect, while the rank-4 tensor includes both the linear and cubic R-D tensor etc. In keeping with recent literature, the rank-3 tensor can be called ‘quadratic altermagnetic tensor’ and includes the ordinary ferromagnetic spin splitting (rank 1), while the next-highest order that is k/−kk/-k symmetric is a rank-5 tensor, which includes both quadratic and quartic altermagnetism as well as ferromagnetic spin splitting.

A completely parallel treatment to the one I just outlined can be performed for scalar parity even and time-reversal-odd textures in real/reciprocal space, which are used to describe collinear magnetic structures within the SG framework. This becomes completely transparent if one casts binary SGs in the slightly different language of time reversal rather than two-fold rotations (see Appendix C for a complete discussion). The corresponding tensors are totally symmetric and their rank is lowered by one with respect to the corresponding vectorial textures.

Conditions for altermagnetism and the Rashba-Dresselhaus effect

Altermagnetism thus defined and for all odd ranks requires the following minimum requirements to be satisfied:

  1. Time reversal symmetry must be broken — in other words, the effect is only allowed in ferromagnets (FM) and some antiferromagnets (AFM).

  1. For a given point kk in the BZ, the spin splitting must reverse in the time-reversed FM or AFM domain.

  1. Spin splitting must be symmetric between kk and −k-k

These conditions were thoroughly discussed in ref. [13], and exactly mirror those for the R-D effect at any even-rank tensor:

  1. Inversion symmetry must be broken.

  1. If the material is magnetic, for a given point kk in the BZ, the spin splitting must be the same in the time-reversed FM or AFM domains.

  1. Spin splitting must be anti-symmetric between kk and −k-k

Note that spin splitting is not possible at any order in the presence of PTPT symmetry (i.e., if the product of inversion and time reversal, θI\theta I, is a symmetry operator)— a well-known result that can be obtained from simple symmetry considerations.[37] Nevertheless, altermagnetism is not incompatible with the magneto-electric effect, tough the latter is often associated with PTPT symmetry conservation.[38]

Jahn symbols and the connection with macroscopic properties

Further progress can be made by defining the so-called Jahn symbol for these tensors,[39] which for a tensor of rank nn in eq. (1) is generically:

eanV[vn−1](2)ea^n V\left[v^{n-1}\right] \tag*{(2)}

where ee indicates that all these are pseudo-tensors (with opposite parity to that of ordinary tensors, which are parity-even for even ranks and parity-odd for odd ranks), aa defines the time reversal properties (ana^n is time-reversal-even when nn is even, odd when nn is odd) and the square brackets indicate symmetrisation on all indices, since these are contracted with the indices of k\mathbf{k}.

The advantage of this notation is that one can sometimes connect these tensors with tensors defining apparently unrelated macroscopic properties that have the same Jahn symbol. One can then mine the often extensive materials databases for these known effects and extract candidate materials where the ‘novel’ effect is allowed by symmetry. For example, The Jahn symbol for the linear R-D effect is eV2eV^2, which is the same as the magnetotoroidic tensor, while the Jahn symbol for the cubic R-D effect is eV[V3]eV[V^3], which does not have an obvious macroscopic counterpart. Most relevant for this paper, the quadratic altermagnetic tensor eaV[V2]eaV[V^2] has the same Jahn symbol as the tensors describing the piezomagnetic effect and the MOKE effect. Piezomagnetism has been known since the 1950s,[33, 40] and a symmetry classification can be found in the famous book by Robert Birss[41], first published in 1964, which also lists several materials now discussed in the context of altermagnetism. Interest in MOKE activity in antiferromagnets and weak ferromagnets is almost as old, dating back to the 1960’s,[34, 42, 43, 44, 45] and has recently experienced a resurgence.[46, 47]

For scalar altermagnetic textures, the corresponding Jahn symbols to those in eq. (2) are a[Vn]a[V^n], where nn is even. So, for example, the tensor for scalar textures corresponding to quadratic altermagnetism has Jahn symbol a[V2]a[V^2], one rank lower compared to the corresponding vectorial texture eaV[V2]eaV[V^2] but with the same parity/time reversal properties.

Tensor forms for quadratic altermagnetism

The allowed altermagnetic tensor forms are restricted by the MPG symmetry of the crystal, so that the tensor itself is completely invariant by any of the MPG operations. The number of free parameters in each tensor form corresponds to the number of times the totally symmetric irrep is contained in the tensor representation. In general a particular tensor form is shared by several MPGs, which can thus be grouped into ‘classes’. For each MPG, the determination of the number of free parameters via character decomposition and the construction of the appropriate tensor form by projection is greatly facilitated by employing the MTENSOR tool provided by the Bilbao Crystallographic Server.[48] Tensors up to rank 6 were calculated using MTENSOR. For tensors above rank 6, polynomial forms were obtained by the standard projection (symmetrisation) method (see for example sec. XIIIE).

Table I lists the 17 unique symmetry-adapted quadratic altermagnetic tensor forms, together with the set of MPGs (class) that share that tensor form, the number of free parameters and a simplified spherical tensor decomposition (further discussed in § 0.6).49 I employed the usual convention, which applies for example to the piezoelectric tensor, in which a 3×63 \times6 matrix is contracted with the array

[kx2,ky2,kz2,kykz,kxkz,kxky](3)[k_x^2,k_y^2,k_z^2,k_yk_z,k_xk_z,k_xk_y] \tag*{(3)}

to yield the three-component Beff\mathbf{B}^{eff}. The effective field Beff\mathbf{B}^{eff} depends on one or more scalar functions Λij(k)\Lambda_{ij}(\mathbf{k}) that are constant on each spherical shell in momentum space (for a note on axes conventions, see 50). Examples of this procedure and on how to impose constraints at special points of the BZ are provided in section XII.

Table I also includes the single class of altermagnetic MPGs that do not allow quadratic altermagnetism (Class XVIII), together with the expression for their spin texture, described by a rank-5 spherical magnetic hexadecapole (see discussion in section VII).

Among the 17 quadratic altermagnetic classes, eight classes (marked in bold and with a (§) in Table I) allow a magnetic dipolar component, i.e., they allow a net magnetic moment and uncompensated spin splitting, though spin polarisation need not arise primarily from and be parallel to the net moment. The 31 magnetic groups in these classes are defined in ref. [20] as ‘Type-I altermagnetic’, and coincide with the admissible point groups, i.e., the ones allowing a net ferromagnetic moment. Out of the remaining ten classes,51 six classes (VIII, XII, XIV, XV, XVII and XVIII, marked in Table I in italic and with an asterisk *) do not allow the spin quantisation axis to be along an allowed collinear antiferromagnetic direction at rank-3 tensor level, while the other four classes (V, IX, X and XI, marked in Table I with a dagger †), do allow it. This aspect will be discussed further in section IX.

Spherical tensor decomposition

In addition to the Cartesian tensor form, it is often useful to decompose tensors onto a symmetry-adapted spherical basis, which makes the symmetry constraints more transparent. Moreover, the spherical (multipole) decomposition creates a bridge between MPG-based approaches and theories based on multipoles, such as the Cluster Multipole Theory[9, 10] [52] and the Landau approach to ferro-multipolar ordering proposed by P. McClarty.[19] [53] As an example, I recall that the rank-2 R-D tensor can be decomposed into a pseudoscalar (L=0L = 0), an ordinary polar vector (L=1L = 1) and a pseudo-quadrupolar traceless tensor (L=2L = 2), all these being time-reversal even. Consequently, the linear R-D effect is allowed in chiral point groups (those that allow a pseudoscalar), polar point groups (which allow an ordinary vector) and a few other non-centrosymmetric groups that only allow the pseudo-quadrupolar traceless tensor (e.g., 4ˉm2\bar{4}m2). When either of these is allowed, these Cartesian tensors can be written as a linear combination of symmetry-adapted spherical basis tensors.

In the case of quadratic altermagnetism, one can perform an entirely analogous decomposition: let ΓL\Gamma^{L} be the SO(3) irrep with dimensionality 2L+12L + 1. Then

[V2]=Γ0+Γ2V[V2]=Γ1⊗(Γ0+Γ2)=2Γ1+Γ2+Γ3(4)\left[V^{2}\right] = \Gamma^{0} + \Gamma^{2} \\ V\left[V^{2}\right] = \Gamma^{1} \otimes\left(\Gamma^{0} + \Gamma^{2}\right) = 2\Gamma^{1} + \Gamma^{2} + \Gamma^{3} \tag*{(4)}

Taking into account parity and time reversal, one concludes that the altermagnetic tensor eaV[V2]\mathbf{e}^{aV}\left[V^{2}\right] decomposes into two magnetic dipoles, a magnetic quadrupole and a magnetic octupole. Since the dipole irrep occurs twice, there is some arbitrariness in the decomposition of the dipolar field, but the natural choice is for one of the two components to be parallel to the dipole vector (DID^{I}), which is also allowed at the lowest rank-1 order and represent the ordinary ferromagnetic uncompensated spin splitting), while the other is parallel to the wavevector k\mathbf{k} (DIID^{II}). The quadrupole terms yields a Beff\mathbf{B}^{eff} that is perpendicular to k\mathbf{k}, while octupolar terms always connect different directions of Beff\mathbf{B}^{eff}.

With this choice and in the absence of any symmetry we can define the four Cartesian tensors as:

DI=δijδαβvj=(vxvxvx000vyvyvy000vzvzvz000)(5)D^{I} = \delta_{ij}\delta_{\alpha\beta}v_j = \begin{pmatrix} v_x & v_x & v_x & 0 & 0 & 0 \\ v_y & v_y & v_y & 0 & 0 & 0 \\ v_z & v_z & v_z & 0 & 0 & 0 \end{pmatrix} \tag*{(5)}
DII=12δiαδβjuj=(ux000uzuy0uy0uz0ux00uzuyux0)(6)D^{II} = \frac{1}{2}\delta_{i\alpha}\delta_{\beta j}u_j = \begin{pmatrix} u_x & 0 & 0 & 0 & u_z & u_y \\ 0 & u_y & 0 & u_z & 0 & u_x \\ 0 & 0 & u_z & u_y & u_x & 0 \end{pmatrix} \tag*{(6)}

where v\mathbf{v} and u\mathbf{u} are the two dipolar components. The quadrupolar tensor can be constructed from a traceless symmetric matrix SjkS_{jk} as

Q=12(ϵiαkδjβ+ϵiβkδjα)Sjk=(0S23−S23−S11−2S22−S12S13−S130S13S122S11+S22−S23S12−S120−S13S23S22−S11)(7)Q = \frac{1}{2}\left(\epsilon_{i\alpha k}\delta_{j\beta}+\epsilon_{i\beta k}\delta_{j\alpha}\right)S_{jk} = \begin{pmatrix} 0 & S_{23} & -S_{23} & -S_{11}-2S_{22} & -S_{12} & S_{13} \\ -S_{13} & 0 & S_{13} & S_{12} & 2S_{11}+S_{22} & -S_{23} \\ S_{12} & -S_{12} & 0 & -S_{13} & S_{23} & S_{22}-S_{11} \end{pmatrix} \tag*{(7)}

while the octupolar tensor OO, defined as a linear combination of L=3L = 3 tesseral harmonics, is:

O=(−O122−O133O122O133O1232O3112O211O211−O211−O223O2232O322O1232O122O311O322−O311−O3222O2232O133O123)(8)O = \begin{pmatrix} -O_{122}-O_{133} & O_{122} & O_{133} & O_{123} & 2O_{311} & 2O_{211} \\ O_{211} & -O_{211}-O_{223} & O_{223} & 2O_{322} & O_{123} & 2O_{122} \\ O_{311} & O_{322} & -O_{311}-O_{322} & 2O_{223} & 2O_{133} & O_{123} \end{pmatrix} \tag*{(8)}

In Appendix § 0.12.2, Table IV, a symmetry-adapted spherical basis is presented, comprising nine unique forms (two dipoles, three quadrupoles and four octupoles) plus forms obtained by axis permutation. In each of the 17 quadratic altermagnetic classes, the unique tensor form can be expressed as a linear combination of one or more symmetry-adapted spherical basis tensors, as shown in Table V.

ClassMagnetic point groupsSpherical basis
Class I§1 1ˉ1\ \bar{1}DxI+DyI+DzI+DxII+DyII+DzII+QxI+QyI+QzI+QII+QIII+OI+OII+OxIII+OyIII+OxIV+OyIV+OzIVD_x^{I}+D_y^{I}+D_z^{I}+D_x^{II}+D_y^{II}+D_z^{II}+Q_x^{I}+Q_y^{I}+Q_z^{I}+Q^{II}+Q^{III}+O^{I}+O^{II}+O_x^{III}+O_y^{III}+O_x^{IV}+O_y^{IV}+O_z^{IV}
Class II§2 m 2m2\ m\ \frac{2}{m}DyI+DyII+QyI+QII+QIII+OI+OyIII+OyIVD_y^{I}+D_y^{II}+Q_y^{I}+Q^{II}+Q^{III}+O^{I}+O_y^{III}+O_y^{IV}
Class III§2′ m′ 2m′2'\ m'\ \frac{2}{m'}DxI+DzI+DxII+DzII+QxI+QzI+OxIII+OxIV+OzII+OzIVD_x^{I}+D_z^{I}+D_x^{II}+D_z^{II}+Q_x^{I}+Q_z^{I}+O_x^{III}+O_x^{IV}+O_z^{II}+O_z^{IV}
Class IV§2′2′2 m′m′2′ m′m′2 m′m′m′m2'2'2\ m'm'2'\ m'm'2\ m' m'm'mDzI+DzII+QzI+OzII+OzIVD_z^{I}+D_z^{II}+Q_z^{I}+O_z^{II}+O_z^{IV}
Class V†222 mmm mm2222\ mmm\ mm2QII+QIII+OIQ^{II}+Q^{III}+O^{I}
Class VI§3 3ˉ3\ \bar{3}DzI+DzII+QII+OxIII+OyIII+OzIVD_z^{I}+D_z^{II}+Q^{II}+O_x^{III}+O_y^{III}+O_z^{IV}
Class VII§32′ 3m′ 3mˉ′32'\ 3m'\ 3\bar{m}'DzI+DzII+OyIII+OzIVD_z^{I}+D_z^{II}+O_y^{III}+O_z^{IV}
Class VIII*32 3m 3ˉm32\ 3m\ \bar{3}mQII+OIIIQ^{II}+O^{III}
Class IX†4′ 4ˉ′ 4′m4'\ \bar{4}'\ \frac{4'}{m}QzI+QIII+OI+OzIIQ_z^{I}+Q^{III}+O^{I}+O_z^{II}
Class X†4′22′ 4′ 2m′4'22'\ 4'\ 2m'QIII+OIQ^{III}+O^{I}
Class XI†4′2′m 4′m′m 4′mm′m 4m′m4'2'm\ 4'm'm\ \frac{4'}{m}m'm\ 4m'mQzI+OzIIQ_z^{I}+O_z^{II}
Class XII*6′ 6ˉ′ 6′m′6'\ \bar{6}'\ \frac{6'}{m'}OxIII+OyIIIO_x^{III}+O_y^{III}
Class XIII§(a) 6 6 6m6\ 6\ \frac{6}{m}<br>(b) 4 4 4m4\ 4\ \frac{4}{m}DzI+DzII+QII+OzIVD_z^{I}+D_z^{II}+Q^{II}+O_z^{IV}
Class XIV*6′22′ 6′ ⁣2m′ 6′ ⁣m2′ 6′ ⁣mm′ 6′m′mm′6'22'\ 6'\!2m'\ 6'\!m2'\ 6'\!mm'\ \frac{6'}{m'}m m'OxIIIO_x^{III}
Class XV*(a) 622 6m2 6mm 6mmm622\ 6m2\ 6mm\ \frac{6}{m}mm<br>(b) 422 42m 4mm 4mmm422\ 42m\ 4mm\ \frac{4}{m}mmQIIQ^{II}
Class XVI§(a) 62′2′ 6m′2′ 6m′m′ 6mm′m′62'2'\ 6m'2'\ 6m'm'\ \frac{6}{m}m'm'<br>(b) 42′2′ 42′m′ 4m′m′ 4mm′m′42'2'\ 42'm'\ 4m'm'\ \frac{4}{m}m'm'DzI+DzII+OzIVD_z^{I}+D_z^{II}+O_z^{IV}
Class XVII*(a) 4′32′ 4′3m′ m3m′4'32'\ 4'3m'\ m3m'<br>(b) 23 m3ˉ23\ m\bar{3}OIO^{I}

Table V. TABLE V. Decomposition of the tensors for the 17 altermagnetic classes in terms of the symmetry-adapted spherical basis tensors in Table Table IV. The subscripts indicates the appropriate axis permutation (see columns in Table Table IV) and is omitted when it is not ambiguous.

(§) Classes allowing a magnetic dipole term (Type-I altermagnets in ref. [20]) (†) Classes allowing spin splitting along a permitted collinear AFM direction (‘strong-collinear’ altermagnetic classes) (*) Classes not allowing spin splitting along a permitted collinear AFM direction (‘weak-collinear’ altermagnetic classes)

Quartic altermagnetism

Having classified all the MPGs that allow rank-3 (quadratic) altermagnetism, one may wonder whether any higher-order altermagnetic point group has been left out — in other words, are there symmetries where piezomagnetism and MOKE activity are forbidden but higher-order altermagnetism is allowed? Having excluded all paramagnetic point groups (where altermagnetism is not allowed at any order) and groups that preserve PTPT symmetry (where spin splitting is entirely forbidden), only three MPGs are left: 432432, 4ˉ3m\bar{4}3m, and m3ˉmm\bar{3}m, which have been included in Table I as Class XVIII. All these MPGs allow quartic (but not quadratic) altermagnetism and share the same one-parameter rank-5 tensor form, such that:

Bieff=Λ(k)ϵijl(kj3kl−kl3kj)(9)B_i^{\mathrm{eff}} = \Lambda(k)\epsilon_{ijl}(k_j^3 k_l - k_l^3 k_j) \tag*{(9)}

ϵijl\epsilon_{ijl} being the totally antisymmetric Levi-Civita symbol. The corresponding tensor is a pure L=4L = 4 (magnetic hexadecapole) spherical tensor, since the L=5L = 5 spherical representation does not contain the totally symmetric irrep of these point groups.

Including quartic altermagnetism will also affect the classification of the MPGs, since some of the classes will split on the basis of their rank-5 tensor forms. In particular, the tetragonal and hexagonal groups in Classes XIII, XV and XVI will split because they have different rank-5 tensor forms, and Class XVIII will also split into two subclasses (this is indicated with the letters (a) and (b) in Table I). However, no further splitting will occur at any higher tensor order, since the MPGs in each class/subclass only differ by the proper/improper nature of some rotations, which has no bearing on any parity-even tensor. Therefore, the classification of altermagnetic groups in Table I can be considered as complete.

Symmetry in reciprocal space

Spin textures constructed with the tensorial method I just described have the full symmetry of the MPG of the crystal, which, in turn, means that the field at a given point in the interior of the BZ will be locally symmetric by the little co-group of that point, without any need for further symmetrisation.18 However, care must be taken at the zone centre and at special points at the BZ boundary, which have additional symmetries due to the fact that points related to them by some symmetry are also related by a reciprocal lattice vector. Unlike the case of the R-D tensor and more generally of even-ranked tensors, there is no general requirement that the spin texture be zero at Kramers points (i.e., points for which 2k2k is a reciprocal lattice vector). In general, uncompensated spin splitting is allowed everywhere if the dipolar term DID^I is allowed, as is the case for ordinary ferromagnets. Whenever dipolar terms are not allowed, spin splitting must vanish at the zone centre and at zone-boundary points with the same little-group symmetry. In other cases, a reduced tensor may be obtained by symmetrisation over the index that is not contracted with kk. Some examples are given in section XII.

Collinearity

Collinearity is not strongly constrained by MPG symmetry, only being forbidden in cubic MPGs. In all other cases, collinear ferromagnetic or antiferromagnetic structures are allowed provided the following conditions are met:

  1. The magnetic moment is either along the high-order rotation axis (hexagonal, trigonal, tetragonal), along one of the 2-fold axes (orthorhombic) or either parallel of perpendicular to the unique 2-fold axis (monoclinic). No special condition exists for triclinic groups.

  1. The point-group symmetry of the magnetic site is admissible, with the admissible direction coinciding with one of the directions specified in point 1. above. This includes magnetic sites in a general position, since point group 1 is of course admissible.

It follows that collinear magnetic structures are allowed by symmetry in all altermagnetic groups with the exception of the cubic ones (Classes XVII and XVIII). However, as anticipated in § 0.5, one must draw an important distinction between classes that do not allow the spin quantisation axis to be along a permitted collinear direction at the rank-3 tensor level (classes VIII, XII, XIV, XV and of course the purely non-collinear XVII and XVIII, for which I will use the adjective ‘weak-collinear’) and those that do (the ‘strong-collinear’ classes V, IX, X and XI). In the latter case, spin splitting in collinear structures could arise from a very similar effect as for ordinary ferromagnets, in that spins travelling along certain crystallographic directions would experience a net effective Zeeman field originating from the ordered magnetic moments, the quantisation axis switching sign depending on the wavevector direction. Unlike the case of true ferromagnets, where the magnetisation is uniform, the internal magnetic field distribution in ferrimagnets and antiferromagnets can never be entirely collinear. Nevertheless, one expects the effective fields (mostly of exchange origin) to be strongest in the direction parallel or antiparallel to the Néel vector. It is noteworthy that all MPGs allowing ferromagnetism can trivially be strong-collinear in the ferromagnetic direction, though some can also be strong-collinear in other directions as well (see example XII D).

By contrast, in the weak-collinear classes (VIII, XII, XIV, XV, XVII and XVIII), the spin quantisation axis produced by the rank-3 tensor is not along one of the allowed collinear antiferromagnetic directions. However, rank-3 spin splitting in these classes can still be very large for non-collinear magnetic structures. All weak-collinear classes with the exception of Classes XVII and XVIII (which cannot support collinear structures) become strong-collinear at a higher tensor order — see § 0.10.

Examples of a strong-collinear and a weak-collinear class are given in section XII with further discussed in § 1.

Strong-collinear higher-order altermagnetism

Strong-collinear altermagnetism will appear for all classes (except Classes XVII and XVIII) at some tensor rank, even when it is forbidden by symmetry at the rank-3 (quadratic) level. Indeed, in their treatment employing SGs, Šmejkal et al.[16] list a number of examples that clearly require higher-order tensors, so one needs to show that analogous results are obtained with MPGs. Classes VIII, XII, XIV and XVb allow strong-collinear quartic (rank-5) altermagnetism, while Class XVa only allows it at the next order (rank-7). The expressions for the full tensors are naturally rather complex, but it is easy to write the BeffB^{\mathrm{eff}} along the collinear direction zz (see example in section XII C for more detail). The appropriate polynomials are reported in Table II. As shown in sec. XII, there is a close correspondence between these forms and those obtained by Šmejkal et al. using the SG treatment (ref. [16], Figure 2). However, it is important to stress that the MPG and SG forms are not always identical. Rather, SG-derived tensor forms are particular instances of the corresponding MPG forms, obtained linking the free parameters through particular relationships, which arise from the fact that the SG approach takes into account additional (approximate) symmetries (see. § 0.11 for a full discussion). This also demonstrates that the MPG and SG approaches are mutually consistent when it comes to strong-collinear altermagnetism.

ClassRankBzeff(k)B_z^{\mathrm{eff}}(k)
VIII5Λ(k)(kx2−3ky2)kxkz\Lambda(k)(k_x^2-3k_y^2)k_xk_z
XII5(Λ1(k)(3kx2ky−ky3)−Λ2(k)(3kxky2−kx3))kz\left(\Lambda_1(k)(3k_x^2k_y-k_y^3)-\Lambda_2(k)(3k_xk_y^2-k_x^3)\right)k_z
XIV5Λ(k)(kx2−3ky2)kxkz\Lambda(k)(k_x^2-3k_y^2)k_xk_z
XVa7Λ(k)(3kx4−10kx2ky2+3ky4)kxky\Lambda(k)(3k_x^4-10k_x^2k_y^2+3k_y^4)k_xk_y
XVb5Λ(k)(kx3ky−ky3kx)\Lambda(k)(k_x^3k_y-k_y^3k_x)

Table II. Polynomial forms of the effective field component zz, which in the listed classes is along the collinear staggered magnetisation (strong-collinear altermagnetism). Classes listed here are weak-collinear altermagnetic at the rank-3 (quadratic) level (see tab. I).

Image not extracted

Figure 2. In-plane (a) and out-of-plane (b) components (both of rank 3) of the texture pattern for Class X (e.g., MPG 4′2′2′4'2'2'). The normalisation function is 1/(kx2+ky2+kz2)1/(k_x^2+k_y^2+k_z^2). Contours were plotted for kz=1k_z=1 and are antisymmetric/symmetric, respectively for panels (a)/(b), by exchange kz→−kzk_z \rightarrow-k_z.

Connection with spin groups: the cubic symmetry

In several important cases (both collinear and non-collinear), the crystal symmetry is only broken by the direction of the magnetic moments. A classic case is that of hematite (Fe2O3\mathrm{Fe}_2\mathrm{O}_3),54 where the 3-fold symmetry is broken at room temperature but remains unbroken below the so-called Morin transition (≈260K\approx260\mathrm{K}). Since the magneto-elastic interaction is often small, one needs to take into account the effect of the approximate crystal symmetry (termed ‘pseudo-symmetry’ in the remainder) on the spin textures. In the case of collinear structures, this can be done effectively using SGs — a treatment that has been presented in previous literature.[16, 17] One needs to establish how the approach based on MPG needs to be modified to take pseudo-symmetry into account, so that the two approaches (MPG and SG) are fully connected and consistent.

Although the effective field BeffB^{\mathrm{eff}} along the staggered magnetisation can always be identified from the MPG treatment, pseudo-symmetries introduce additional (approximate) constraints that are not immediately apparent from the MPG (see sec. XII D for a complete example). A simple and effective technique to address this issue is to rotate all the magnetic moments into a high-symmetry direction, so that as many pseudo-symmetry operators as possible become re-established as exact symmetries in the MPG. When the magneto-elastic interaction is weak, such high-symmetry phase is almost always physical and, if it is not the ground state, it can usually be reached by applying a relatively small magnetic field. However, this approach is not always viable, particularly in cubic symmetry, because, for collinear phases, cubic crystal symmetry can never be fully restored by any direction of the staggered magnetisation. These are precisely the cases in which a separate symmetry analysis using SGs is most necessary.

Here, SG analysis is implemented within the same tensorial framework as the MPGs and by using using Shubnikov groups rather than the (isomorphic) binary SG. For collinear structures, this is equivalent to treating textures in both real and momentum space as time-reversal-odd scalars (see Appendix § 0.12.3). Treating real-space collinear magnetic textures in this manner is by no means unprecedented — in fact, classifying magnetic structures based on scalar ordering patterns (e.g., AA-type, CC-type, GG-type, etc.) goes back all the way to the very beginning of the experimental research on AFMs (ref. 55 fig. 18). Scalar patterns also play a key role in the theory of exchange multiplets,56 which, crucially, can also be applied to non-collinear structures. Within this framework, a given collinear magnetic structure will then come to be associated with two distinct Shubnikov groups: the Shubnikov MPG, which describes the exact symmetry of the combined crystal and axial-vector magnetic structures, and the Shubnikov SG, which describes the symmetry of the corresponding scalar magnetic ordering pattern. In the absence of pseudo-symmetries, the two Shubnikov groups will act in the same way on the crystal structure (i.e., they have the same associated ‘grey’ group) and can be readily obtained from one another if the direction of the magnetic moment is known. However, in the presence of pseudo-symmetries, the Shubnikov SG will generally have a higher symmetry, the additional operators corresponding precisely to the pseudo-symmetries. By construction, Shubnikov (or binary) SG can be employed to

ClassTensor FormMagnetic point groupsParametersSpherical decomp.
Class I§(Λ11Λ12Λ13Λ14Λ15Λ16Λ21Λ22Λ23Λ24Λ25Λ26Λ31Λ32Λ33Λ34Λ35Λ36)\begin{pmatrix} \Lambda_{11} & \Lambda_{12} & \Lambda_{13} & \Lambda_{14} & \Lambda_{15} & \Lambda_{16} \\ \Lambda_{21} & \Lambda_{22} & \Lambda_{23} & \Lambda_{24} & \Lambda_{25} & \Lambda_{26} \\ \Lambda_{31} & \Lambda_{32} & \Lambda_{33} & \Lambda_{34} & \Lambda_{35} & \Lambda_{36} \end{pmatrix}1 1ˉ1\ \bar{1}18D(6)+Q(5)+O(7)
Class II§(000Λ140Λ16Λ21Λ22Λ230Λ250000Λ340Λ36)\begin{pmatrix} 0 & 0 & 0 & \Lambda_{14} & 0 & \Lambda_{16} \\ \Lambda_{21} & \Lambda_{22} & \Lambda_{23} & 0 & \Lambda_{25} & 0 \\ 0 & 0 & 0 & \Lambda_{34} & 0 & \Lambda_{36} \end{pmatrix}2 m 2m2\ m\ \frac{2}{m}8D(2)+Q(3)+O(3)
Class III§(Λ11Λ12Λ130Λ150000Λ240Λ26Λ31Λ32Λ330Λ350)\begin{pmatrix} \Lambda_{11} & \Lambda_{12} & \Lambda_{13} & 0 & \Lambda_{15} & 0 \\ 0 & 0 & 0 & \Lambda_{24} & 0 & \Lambda_{26} \\ \Lambda_{31} & \Lambda_{32} & \Lambda_{33} & 0 & \Lambda_{35} & 0 \end{pmatrix}2′ m′ 2′m′2'\ m'\ \frac{2'}{m'}10D(4)+Q(2)+O(4)
Class IV§(0000Λ150000Λ2400Λ31Λ32Λ33000)\begin{pmatrix} 0 & 0 & 0 & 0 & \Lambda_{15} & 0 \\ 0 & 0 & 0 & \Lambda_{24} & 0 & 0 \\ \Lambda_{31} & \Lambda_{32} & \Lambda_{33} & 0 & 0 & 0 \end{pmatrix}2′2′2  m′m′2′ m′m′2 m′m′m2'2'2\ \ m'm'2'\ m' m'2\ m'm'm5D(2)+Q+O(2)
Class V†(000Λ14000000Λ25000000Λ36)\begin{pmatrix} 0 & 0 & 0 & \Lambda_{14} & 0 & 0 \\ 0 & 0 & 0 & 0 & \Lambda_{25} & 0 \\ 0 & 0 & 0 & 0 & 0 & \Lambda_{36} \end{pmatrix}222 mmm mm2222\ mmm\ mm23Q(2)+O
Class VI§(Λ11−Λ110Λ14Λ15−2Λ22−Λ22Λ220Λ15−Λ14−2Λ11Λ31Λ31Λ33000)\begin{pmatrix} \Lambda_{11} & -\Lambda_{11} & 0 & \Lambda_{14} & \Lambda_{15} & -2\Lambda_{22} \\ -\Lambda_{22} & \Lambda_{22} & 0 & \Lambda_{15} & -\Lambda_{14} & -2\Lambda_{11} \\ \Lambda_{31} & \Lambda_{31} & \Lambda_{33} & 0 & 0 & 0 \end{pmatrix}3 3ˉ3\ \bar{3}6D(2)+Q+O(3)
Class VII§(0000Λ15−2Λ22−Λ22Λ220Λ1500Λ31Λ31Λ33000)\begin{pmatrix} 0 & 0 & 0 & 0 & \Lambda_{15} & -2\Lambda_{22} \\ -\Lambda_{22} & \Lambda_{22} & 0 & \Lambda_{15} & 0 & 0 \\ \Lambda_{31} & \Lambda_{31} & \Lambda_{33} & 0 & 0 & 0 \end{pmatrix}32′ 3m′ 3m′32'\ 3m'\ 3m'4D(2)+O(2)
Class VIII*(Λ11−Λ110Λ14000000−Λ14−2Λ11000000)\begin{pmatrix} \Lambda_{11} & -\Lambda_{11} & 0 & \Lambda_{14} & 0 & 0 \\ 0 & 0 & 0 & 0 & -\Lambda_{14} & -2\Lambda_{11} \\ 0 & 0 & 0 & 0 & 0 & 0 \end{pmatrix}32 3m 3ˉm32\ 3m\ \bar{3}m2Q+O
Class IX†(000Λ14Λ150000−Λ15Λ140Λ31−Λ31000Λ36)\begin{pmatrix} 0 & 0 & 0 & \Lambda_{14} & \Lambda_{15} & 0 \\ 0 & 0 & 0 & -\Lambda_{15} & \Lambda_{14} & 0 \\ \Lambda_{31} & -\Lambda_{31} & 0 & 0 & 0 & \Lambda_{36} \end{pmatrix}4′ 4ˉ′ 4′m4'\ \bar{4}'\ \frac{4'}{m}4Q(2)+O(2)
Class X†(000Λ14000000Λ14000000Λ36)\begin{pmatrix} 0 & 0 & 0 & \Lambda_{14} & 0 & 0 \\ 0 & 0 & 0 & 0 & \Lambda_{14} & 0 \\ 0 & 0 & 0 & 0 & 0 & \Lambda_{36} \end{pmatrix}4′22′ 4ˉ′2m′4'22'\ \bar{4}'2m'2Q+O
Class XI†(0000Λ150000−Λ1500Λ31−Λ310000)\begin{pmatrix} 0 & 0 & 0 & 0 & \Lambda_{15} & 0 \\ 0 & 0 & 0 & -\Lambda_{15} & 0 & 0 \\ \Lambda_{31} & -\Lambda_{31} & 0 & 0 & 0 & 0 \end{pmatrix}4′2ˉ′m  4′mˉ′m 4′m′m4'\bar{2}'m\ \ 4'\bar{m}'m\ \frac{4'}{m'}m2Q+O
Class XII*(Λ11−Λ11000−2Λ22−Λ22Λ22000−2Λ11000000)\begin{pmatrix} \Lambda_{11} & -\Lambda_{11} & 0 & 0 & 0 & -2\Lambda_{22} \\ -\Lambda_{22} & \Lambda_{22} & 0 & 0 & 0 & -2\Lambda_{11} \\ 0 & 0 & 0 & 0 & 0 & 0 \end{pmatrix}6′ 6ˉ′ 6′m′6'\ \bar{6}'\ \frac{6'}{m'}2O(2)
Class XIII§(000Λ14Λ150000Λ15−Λ140Λ31Λ31Λ33000)\begin{pmatrix} 0 & 0 & 0 & \Lambda_{14} & \Lambda_{15} & 0 \\ 0 & 0 & 0 & \Lambda_{15} & -\Lambda_{14} & 0 \\ \Lambda_{31} & \Lambda_{31} & \Lambda_{33} & 0 & 0 & 0 \end{pmatrix}(a) 6 6ˉ 6m6\ \bar{6}\ \frac{6}{m}; (b) 4 4ˉ 4m4\ \bar{4}\ \frac{4}{m}4D(2)+Q+O
Class XIV*(Λ11−Λ11000000000−2Λ11000000)\begin{pmatrix} \Lambda_{11} & -\Lambda_{11} & 0 & 0 & 0 & 0 \\ 0 & 0 & 0 & 0 & 0 & -2\Lambda_{11} \\ 0 & 0 & 0 & 0 & 0 & 0 \end{pmatrix}6′22′ 6ˉ′2m′ 6ˉ′m2′ 6ˉ′mm′ 6′m′m′6'22'\ \bar{6}'2m'\ \bar{6}'m2'\ \bar{6}'mm'\ \frac{6'}{m'}m'1O
Class XV*(000Λ14000000−Λ140000000)\begin{pmatrix} 0 & 0 & 0 & \Lambda_{14} & 0 & 0 \\ 0 & 0 & 0 & 0 & -\Lambda_{14} & 0 \\ 0 & 0 & 0 & 0 & 0 & 0 \end{pmatrix}(a) 622 6m2 6mm 6mm622\ 6m2\ 6mm\ \frac{6}{m}m; (b) 422 42m 4mm 4mm422\ 42m\ 4mm\ \frac{4}{m}m1Q
Class XVI§(0000Λ150000Λ1500Λ31Λ31Λ33000)\begin{pmatrix} 0 & 0 & 0 & 0 & \Lambda_{15} & 0 \\ 0 & 0 & 0 & \Lambda_{15} & 0 & 0 \\ \Lambda_{31} & \Lambda_{31} & \Lambda_{33} & 0 & 0 & 0 \end{pmatrix}(a) 62′2′ 6m′2′ 6m′m′ 6mm′62'2'\ 6m'2'\ 6m'm'\ \frac{6}{m}m'; (b) 42′2′ 42′m′ 4m′m′ 4mm′42'2'\ 42'm'\ 4m'm'\ \frac{4}{m}m'3D(2)+O
Class XVII*(000Λ14000000Λ14000000Λ14)\begin{pmatrix} 0 & 0 & 0 & \Lambda_{14} & 0 & 0 \\ 0 & 0 & 0 & 0 & \Lambda_{14} & 0 \\ 0 & 0 & 0 & 0 & 0 & \Lambda_{14} \end{pmatrix}(a) 4′ ⁣32′ 4′ ⁣3m′ m3m′4'\!32'\ 4'\!3m'\ m3m'; (b) 23 m323\ m31O
Class XVIII*Bieff=Λ(k)ϵijl(kl3kj−kl3kj)B_i^{\mathrm{eff}}=\Lambda(k)\epsilon_{ijl}(k_l^3k_j-k_l^3k_j)432 4ˉ3m mˉ3m432\ \bar{4}3m\ \bar{m}3m1H

Table 1. Tensor forms for the 18 altermagnetic classes of MPGs. Classes I-XVII are the quadratic altermagnetic (= piezomagnetic, MOKE-active) classes, each comprising several MPGs (column 3). The number of parameters for each tensor form and the spherical tensor decomposition (DD = dipole, QQ = duadrupole, OO = octupole) are provided in columns 4 and 5 (see Appendix B). Class XVIII comprises the three remaining altermagnetic groups with rank-5 as the lowest-rank tensor (HH = hexadecapole). For Class XVIII, the explicit form of BeffB^{\mathrm{eff}} is provided instead of the (very cumbersome) matrix. MPGs labelled with (a) and (b) form separate subclasses when quartic altermagnetism is accounted for (see text).

classify and delimit any magnetic property that does not depend on the direction of the magnetic moment, and, in the present context, can be used to construct symmetrised scalar-field tensors (polynomial forms) in momentum space at any order.

Lowest-order polynomial forms for all cubic SGs have been obtained using scalar-field tensors, as discussed in sec. IV, and are listed in Table III together with the corresponding MPGs for magnetic moments along the three cubic symmetry directions [1], [110] and [111]. When comparing these forms with the corresponding strong-collinear forms of the same MPGs, one notices that the former can be obtained from the latter by fixing some of the parameters to have specific values. In other words, the additional approximate symmetry implied by the scalar textures (pseudo-symmetry) manifests itself by establishing a link between effective-field parameters that would otherwise be independent. This becomes clear when considering specific cubic symmetries.

Spin groupsS∥[001]S \parallel[001]S∥[110]S \parallel[110]S∥[111]S \parallel[111]
23,m‾323,\overline{m}3ClassII (..2)I (1)VIII (3)
FormΛ(k)(kx2+ky2+kz2)\Lambda(k)(k_x^2+k_y^2+k_z^2)Λ(k)(kx2+ky2+kz2)\Lambda(k)(k_x^2+k_y^2+k_z^2)Λ(k)(kx2+ky2+kz2)\Lambda(k)(k_x^2+k_y^2+k_z^2)
432,4‾3m432,\overline{4}3mClassXIVb (4′2′24'2'2)IV (2′2′22'2'2)VII (32′32')
m‾3m\overline{m}3mFormΛ(k)(kx2+ky2+kz2)\Lambda(k)(k_x^2+k_y^2+k_z^2)Λ(k)(kx2+ky2+kz2)\Lambda(k)(k_x^2+k_y^2+k_z^2)Λ(k)(kx2+ky2+kz2)\Lambda(k)(k_x^2+k_y^2+k_z^2)
4‾32‾\overline{4}3\overline{2}ClassXI (4m′m′\frac{4}{m}'m')IV (2′2′22'2'2)VIII (3232)
4‾3m,m‾3m‾\overline{4}3m,\overline{m}3\overline{m}FormΛ(k)(kx2−ky2)(kx2−kz2)(ky2−kz2)\Lambda(k)(k_x^2-k_y^2)(k_x^2-k_z^2)(k_y^2-k_z^2)Λ(k)(−2kx2+(ky−kz)2)(−2kx2+(ky+kz)2)kykz\Lambda(k)(-2k_x^2+(k_y-k_z)^2)(-2k_x^2+(k_y+k_z)^2)k_yk_zΛ(k)(kx2−3ky2)kxkz⋅[6(kx2+ky2)−16kz2−2(ky2−3kx2)]\Lambda(k)(k_x^2-3k_y^2)k_xk_z\cdot[6(k_x^2+k_y^2)-16k_z^2-\sqrt{2}(k_y^2-3k_x^2)]

Table III. Polynomial forms of the effective field components for cubic groups and different high-symmetry magnetic moment directions. The corresponding spin groups are indicated in the first column. For each moment direction, the corresponding MPG class is indicated together with one MPG example (to establish the correct setting). The symbol ..2 means that the 2-fold axis is along the zz direction (see text).

The cubic SGs 23, 3ˉ\bar{3}, 432 4ˉ3m\bar{4}3m and mˉ3mˉ\bar{m}3\bar{m} are all ferro- (or ferri-) magnetic, and the lowest-order cubic polynomial form is completely isotropic. The corresponding MPGs all admit a dipole component, which is, however, not necessarily isotropic. For example, the polynomial form for MPG 42′2′42'2' is Λ1(k)(kx2+ky2)+Λ2(k)kz2\Lambda_1(k)(k_x^2+k_y^2)+\Lambda_2(k)k_z^2. Therefore, the pseudo-cubic symmetry had the result of imposing Λ1(k)=Λ2(k)=Λ\Lambda_1(k)=\Lambda_2(k)=\Lambda.

The case of the three remaining cubic groups 4ˉ32ˉ\bar{4}3\bar{2}, 4ˉ3mˉ\bar{4}3\bar{m} and m3ˉmm\bar{3}m is considerably more interesting, and is discussed in more detail in sec. XII E. The lowest-order cubic polynomial form is of rank 7 (rank 6 for the corresponding SGs), while the corresponding MPGs admit lower-order polynomial forms (see tab. I and Table II). As always, these lower-order MPG forms are contained in the rank-7 forms — for example, the trigonally-symmetric (Class VIII) rank-5 form Λ(k)(kx2−3ky2)kxkz\Lambda(k)(k_x^2-3k_y^2)k_xk_z has corresponding rank-7 components (kx2−3ky2)kxkz(Λ1(k)(kx2+ky2)+Λ2(k)kz2)(k_x^2-3k_y^2)k_xk_z\left(\Lambda_1(k)(k_x^2+k_y^2)+\Lambda_2(k)k_z^2\right), since (kx2+ky2)(k_x^2+k_y^2) and kz2k_z^2 are totally symmetric in trigonal symmetry. However, in the presence of cubic pseudo-symmetry, these components are linked together and with other rank-7 components, yielding the pseudo-cubic rank-7 form displayed in Table III. All other trigonal components only arise from the symmetry breaking due to the magnetic moment direction, and are expected to be small for weak magneto-elastic interactions/SOC.

Examples

Here, I provide a set of examples to illustrate the practical use of this method and in particular of Table I, and to highlight some of the issues arising from different crystallographic conventions. All the examples and references were generated using the program MAGNDATA from the Bilbao Crystallographic Server.[35] The figures display the ‘texture pattern’ as a normalised Beff\mathbf{B}^{\mathrm{eff}} vector field, where the normalisation function is 1/(kx2+ky2+kz2)(n−1)/21/(k_x^2+k_y^2+k_z^2)^{(n-1)/2} where nn is the rank of the tensor. These ‘texture patterns’ correspond to the gnomonic projection of the textures, i.e., a projection from the centre of the unit sphere to a plane tangent to it. This projection is most convenient to display the symmetry (it preserves angles at the centre) and the details of the textures. In these figures, kxk_x and kyk_y are in arbitrary dimensionless units, and the conversion to spherical coordinates is tan⁡θ=kx2+ky2\tan\theta=\sqrt{k_x^2+k_y^2}, tan⁡ϕ=ky/kx\tan\phi=k_y/k_x. There is a close correspondence between these texture patterns and those displayed schematically in fig. 2 of Šmejkal et al. 16 (more details in the figure legends). An example of texture plotted on the surface of a sphere in momentum space is shown in sec. XII E.

Class XIV (weak-collinear at rank 3)

Class XIV comprises five hexagonal MPGs: 6′/m′mm′6' /m'mm', 6′/2m′6'/2m' (a MPG adopted, for example, by TmAgGe, ref. 57), 6′/m2′6'/m2', 6′/mm′6'/mm' (HoMnO3_3, MSG P63cm′P6_3cm', ref. 58) and 6′/22′6'/22'. The expression for Beff(k)\mathbf{B}^{\mathrm{eff}}(\mathbf{k}) for this class at the rank-3 tensor level is:

Bxeff(k)=Λ11(k)(kx2−ky2)Byeff(k)=Λ11(k)(−2kxky)Bzeff(k)=0(10)\begin{aligned} B_x^{\mathrm{eff}}(\mathbf{k}) &= \Lambda_{11}(k)(k_x^2-k_y^2) \\ B_y^{\mathrm{eff}}(\mathbf{k}) &= \Lambda_{11}(k)(-2k_xk_y) \\ B_z^{\mathrm{eff}}(\mathbf{k}) &= 0 \tag*{(10)} \end{aligned}

the spin texture being parametrised by a single scalar function of kk, Λ11(k)\Lambda_{11}(k). The spin quantisation axis is in the xyxy plane and therefore always perpendicular to the high-symmetry direction, i.e., the allowed direction for the Néel vector. The spin texture is parallel to k\mathbf{k} along the six directions Γ−K\Gamma-K and Γ−K′\Gamma-K', while it is perpendicular to k\mathbf{k} along the Γ−M\Gamma-M lines (see ref. 59 for the BZ point notation). Since the three KK points and the three K′K' points are equivalent, Λ14(k)\Lambda_{14}(k) must be 00 both at the Γ\Gamma point and at k=∣K∣k=|K|. There is no additional constraint at points MM.

Class XIV is also useful to illustrate how to deal with different axes orientations, which is essential to employ Table I correctly. As a preamble, one should remark that, in the presence of a crystal lattice, the orientation of the point group directions is not arbitrary, but is related to that of the crystal axes. So, for example, symbols 62m62m and 6ˉm2\bar{6}m2 refer to the same point group, being related by a 90∘90^\circ rotation of the in-plane axes. However, P6ˉ2mP\bar{6}2m and P6ˉm2P\bar{6}m2 are distinct space groups, since the in-plane directions are now linked to the crystal axes.

The symbols, 6′2′26'2'2, 6ˉ′m′2\bar{6}'m'2, 6ˉ′2′m\bar{6}'2'm (e.g., ThMn12_{12}, ref. 60 and CsFeCl3_3, ref. 61, both with MSG, P6ˉ′2′mP\bar{6}'2'm), 6′mˉ′m6'\bar{m}'m (e.g., YbMnO3_3, MSG P63′cmP6_3'cm, ref. 62), and 6′m′m′m\frac{6'}{m'}m'm (e.g., CrSb, MSG P6ˉ′m′m′cP\frac{\bar{6}'}{m'}m'c, ref. 63) refer to the same point groups (6′22′6^{\prime}2 2^{\prime}, 6′2m′6^{\prime}2m^{\prime}, 6′m2′6^{\prime}m2^{\prime}, 6′mm′6^{\prime}mm^{\prime}, and 6′mm′m′\frac{6^{\prime}}{m}m^{\prime}m^{\prime}, respectively), with the in-plane axes rotated by 90∘90^\circ. Therefore, when dealing with MSGs such as P6ˉ′2′mP\bar{6}^{\prime}2^{\prime}m or P63′mm′cP\frac{6_3^{\prime}}{m}m^{\prime}c, one should employ the rotated form of the tensor64.

(00000−2Λ22−Λ22Λ220000000000)(11)\begin{pmatrix} 0 & 0 & 0 & 0 & 0 & -2\Lambda_{22} \\ -\Lambda_{22} & \Lambda_{22} & 0 & 0 & 0 & 0 \\ 0 & 0 & 0 & 0 & 0 & 0 \tag*{(11)} \end{pmatrix}

The expression for Beff(k)\mathbf{B}^{eff}(\mathbf{k}) for this set being:

Bxeff(k)=Λ11(k)(−2kxky)B_x^{eff}(\mathbf{k})=\Lambda_{11}(k)(-2k_xk_y)
Byeff(k)=Λ11(k)(ky2−kx2)B_y^{eff}(\mathbf{k})=\Lambda_{11}(k)(k_y^2-k_x^2)
Bzeff(k)=0(12)B_z^{eff}(\mathbf{k})=0 \tag*{(12)}

Among the compounds listed above, TmAgGe, HoMnO3_3, YbMnO3_3, CsFeCl3_3 and ThMn2_2 are reported to have non-collinear magnetic structures, while SbCr is reportedly collinear.

As discussed in § 0.10, Class XIV becomes strong-collinear at the rank-5 (quartic) level, the effective field along the zz axis (the allowed direction for the collinear staggered magnetisation) being (see Table II):

Bzeff(k)=Λ(k)(kx3−3ky2kx)kz(13)B_z^{eff}(\mathbf{k})=\Lambda(k)(k_x^3-3k_y^2k_x)k_z \tag*{(13)}

Figure 1 displays the corresponding texture patterns.

Image not extracted

Figure 1. In-plane, rank-3 (a) and out-of-plane, rank 5 (b) components of the ‘texture pattern’ (normalised Beff\mathbf{B}^{eff} vector field, corresponding to the gnomonic projection of the spin texture — see text), for Class XIV (e.g., MPG 6′22′6^{\prime}22^{\prime}). The normalisation functions are 1/(kx2+ky2+kz2)(n−1)/21/(k_x^2+k_y^2+k_z^2)^{(n-1)/2}, nn being the rank of the tensor. Contours were plotted for kz=1k_z=1 and are symmetric/antisymmetric, respectively for panels (a)/(b), by exchange kz→−kzk_z\to-k_z. Panel (b) to be compared with fig. 2, sub-panel B4 of ref. 16.

Classes X and XI (strong-collinear at rank 3)

Classes X and XI are closely related,32 because their tensor forms are related by a 45∘45^\circ rotation. However, these forms look sufficiently different to make distinct classes useful in practice. The difference between the two classes stems from the fact that, in Class X, operators along the the primary ([1]) and tertiary ([110]) symmetry directions are primed while, for Class XI, operators along the the primary ([1]) and secondary ([100]) symmetry directions are primed.

The tensor form for Class X allows spin splitting along all three axes. However, setting Λ14≈0\Lambda_{14} \approx0, one finds that the spin quantisation axis can be predominantly parallel or antiparallel to the zz axis, i.e., the allowed Néel vector direction for collinear antiferromagnetism. The maximum effective Zeeman field along the zz axis is for wavevectors in the (110) and (11ˉ0)(1\bar{1}0) directions, and the sign of the field switches between these two directions.

Class X comprises the MPGs 4′2ˉm′4'\bar{2}m' (e.g., Pb2_2MnO4_4, ref. 65) and 4′2ˉ2′4'\bar{2}2' (Er2_2Ge2_2O7_7, ref. 66), but also those corresponding to the non-standard setting 4′2ˉ′m4'\bar{2}'m, 4′mˉm′4'\bar{m}m' and 4ˉ′mm′\bar{4}'mm' (e.g., LiFe2_2F6_6, ref. 67, and RuO2_2, ref. 68, both with MSG P4ˉ2/nm′m′P\bar{4}_2/nm'm'). The characteristic spherical tensor expansion for this class is:

A(k)QIII+B(k)OI(14)A(k) Q^{III} + B(k) O^{I} \tag*{(14)}

where QIIIQ^{III} and OIO^{I} are fixed tensors defined in Table IV. The spin texture is:

Bxeff(k)=Λ14(k)kykzByeff(k)=Λ14(k)kxkzBzeff(k)=Λ36(k)kxky(15)\begin{aligned} B_x^{eff}(\mathbf{k}) &= \Lambda_{14}(k)k_y k_z \\ B_y^{eff}(\mathbf{k}) &= \Lambda_{14}(k)k_x k_z \\ B_z^{eff}(\mathbf{k}) &= \Lambda_{36}(k)k_x k_y \tag*{(15)} \end{aligned}

In the primitive tetragonal cell (adopted by Pb2_2MnO4_4, Er2_2Ge2_2O7_7, LiFe2_2F6_6 and RuO2_2), the four MM points have reciprocal-space coordinates (12,12,0)(\frac{1}{2},\frac{1}{2},0), (−12,12,0)(-\frac{1}{2},\frac{1}{2},0), (12,−12,0)(\frac{1}{2},-\frac{1}{2},0) and (−12,−12,0)(-\frac{1}{2},-\frac{1}{2},0) and are all related by reciprocal lattice vectors. However, according to eq. (15), (12,12,0)/(12,−12,0)(\frac{1}{2},\frac{1}{2},0)/(\frac{1}{2},-\frac{1}{2},0) and (−12,12,0)/(12,−12,0)(-\frac{1}{2},\frac{1}{2},0)/(\frac{1}{2},-\frac{1}{2},0) must have opposite spin textures, which means that Λ36(k)=0\Lambda_{36}(k)=0 for k=kMk=k_M. The in-plane and out-of-plane spin-texture patterns, both of rank 3, are displayed in Figure 2.

Class XI comprises the standard-setting MPGs 4′2ˉ′m4'\bar{2}'m, 4′mˉ′m4'\bar{m}'m, 4ˉ′m′m\bar{4}'m'm (e.g., the pyrochlores Er2_2Ti2_2O7_7 and Er2_2Ru2_2O7_7, with MSG I41/am′dI4_1/a m'd, refs. 69,70), and also the non-standard-settings 4′2ˉ′m4'\bar{2}'m and 4′2ˉ′24'\bar{2}'2. The characteristic spherical tensor expansion for this class is:

A(k)QzI+B(k)OzII(16)A(k) Q_z^{I} + B(k) O_z^{II} \tag*{(16)}

where QzIQ_z^{I} and OzIIO_z^{II} are fixed tensors defined in Table IV. The spin texture is rotated by 45° with respect to Class X:

Bxeff(k)=Λ15(k)kxkzByeff(k)=−Λ15(k)kykzBzeff(k)=Λ13(k)(kx2−ky2)(17)\begin{aligned} B_x^{eff}(\mathbf{k}) &= \Lambda_{15}(k)k_x k_z \\ B_y^{eff}(\mathbf{k}) &= -\Lambda_{15}(k)k_y k_z \\ B_z^{eff}(\mathbf{k}) &= \Lambda_{13}(k)(k_x^2-k_y^2) \tag*{(17)} \end{aligned}

Among the compounds listed above, Pb2_2MnO4_4, Er2_2Ge2_2O7_7, Er2_2Ti2_2O7_7 are reported to have non-collinear magnetic structures, while LiFe2_2F6_6, Er2_2Ru2_2O7_7, and RuO2_2 are reportedly collinear (but doubts have recently be raised concerning magnetism in RuO2_2 — see ref. [71]).

Class XV: higher-order strong-collinear altermagnetism

Class XV is weak-collinear at the rank-3 level, with

Bxeff(k)=Λ14(k)kykzByeff(k)=−Λ14(k)kxkzBzeff(k)=0(18)\begin{aligned} B_x^{eff}(\mathbf{k}) &= \Lambda_{14}(k)k_y k_z \\ B_y^{eff}(\mathbf{k}) &= -\Lambda_{14}(k)k_x k_z \\ B_z^{eff}(\mathbf{k}) &= 0 \tag*{(18)} \end{aligned}

Subclasses XVa and XVb become strong-collinear at the rank-7 and rank-5 level, respectively, the corresponding BzeffB_z^{eff} components being listed in Table II. Figure 3 and Figure 4 display the corresponding texture patterns.

Image not extracted

Figure 3. In-plane, rank-3 (a) and out-of-plane, rank-7 (b) components of the texture pattern for Class XVa (e.g., MPG 622). The normalisation function is as in previous figures. Contours were plotted for kz=1k_z=1 and are antisymmetric/symmetric, respectively for panels (a)/(b), by exchange kz→−kzk_z \rightarrow-k_z. Panel (b) to be compared with fig. 2, sub-panel P6 of [16].

Image not extracted

Figure 4. In-plane, rank-3 (a) and out-of-plane, rank-5 (b) components of the texture pattern for Class XVb (e.g., MPG 422). The normalisation function is as in previous figures. Contours were plotted for kz=1k_z=1 and are antisymmetric/symmetric, respectively for panels (a)/(b), by exchange kz→−kzk_z \to-k_z. Panel (b) to be compared with Figure 2, sub-panel P4 of ref. 16.

Spin-flop transitions: connection with spin groups

As discussed in § 0.11, pseudo-symmetries are often created across a spin flop transition, when spins are rotated away from a high-symmetry direction. These examples are very useful to illustrate the connection between the MPG and SG treatment of the same collinear structure.

Let us consider the magnetic structure of CoF2_2 (space group P42mnmP\frac{4_2}{m}nm), a well known piezomagnetic material.[33, 40] In zero applied magnetic field, CoF2_2 possesses a fully compensated collinear structure with spins along the cc-axis. In this compound, Co2+^{2+} (3d73d^7) is strongly anisotropic, and a spin flop transition was reported at a magnetic field of 7 T,[72] which is typical of many 3d transition metal compounds.[73] The MSG in the zero-field phase is P42mnm′P\frac{4_2}{m}nm^\prime, and the MPG is 4mmm′\frac{4}{m}mm^\prime (Class X). In the high-field phase and assuming magnetic moments along the [100] or [110] directions, the MPG is m′mm′m^\prime mm^\prime, where the first m′m^\prime is perpendicular to the Néel vector direction (here chosen to be the xx axis), while the second m′m^\prime is perpendicular to the zz axis. This MPG is a member of Class IV, with yy and zz exchanged. Using the conventions indicated here above, we obtain:

TS∥c=(000Λ14000000Λ14000000Λ36)T_{S\parallel c}= \begin{pmatrix} 0 & 0 & 0 & \Lambda_{14} & 0 & 0\\ 0 & 0 & 0 & 0 & \Lambda_{14} & 0\\ 0 & 0 & 0 & 0 & 0 & \Lambda_{36} \end{pmatrix}
TS∥a=(00000Λ15Λ31Λ33Λ32Λ2400000000)(19)T_{S\parallel a}= \begin{pmatrix} 0 & 0 & 0 & 0 & 0 & \Lambda_{15}\\ \Lambda_{31} & \Lambda_{33} & \Lambda_{32} & \Lambda_{24} & 0 & 0\\ 0 & 0 & 0 & 0 & 0 & 0 \end{pmatrix} \tag*{(19)}

where, for TS∥aT_{S\parallel a}, I have exchanged yy and zz with respect to the standard setting in Table I. The zero-field magnetic structure TS∥cT_{S\parallel c} is strong-collinear for the collinear AFM direction along the zz axis, via the tensor element Λ36\Lambda_{36}. When Λ14\Lambda_{14} is set to zero, Beff\mathbf{B}^{eff} is also parallel to the zz axis and has the form Λ36kxky\Lambda_{36}k_xk_y, being maximum when k\mathbf{k} is in the xy/xˉyˉxy/\bar{x}\bar{y} directions. The high-field magnetic structure would allow weak FM, as indicated by the presence of dipole terms in Class IV. However, TS∥aT_{S\parallel a} is also strong-collinear in the xx direction via the Λ15\Lambda_{15} element. When all other elements are set to zero, Beff\mathbf{B}^{eff} is along the xx direction (the direction of the AFM moments) and has the form Λ24kykz\Lambda_{24}k_yk_z, being maximum when k\mathbf{k} is in the yz/yˉzˉyz/\bar{y}\bar{z} directions. This is exactly what one would expect based on the SG approach (see below), i.e., spin splitting along the AFM spin direction and with a reciprocal space pattern that does not depend on the spin direction. The MPG approach correctly describes this and also includes other tensor elements that are allowed by symmetry (in this case along the yy direction), which are likely to be small for collinear structures, but may well be large for non-collinear structures.

Regardless of the spin orientation, the spin space group is P42mn~mP\frac{4_2}{m}\tilde{n}m, where the “∼\sim” symbol indicates spin flip in the SG sense, i.e., with the space-group operators only acting on atoms and not on spins. The (point) SG is 4mm~m\frac{4}{m}\tilde{m}m, and the scalar texture tensor, generated using MTENSOR is:

TSG=(0Λ120Λ1200000)(20)T_{SG}=\begin{pmatrix}0 & \Lambda_{12} & 0 \\ \Lambda_{12} & 0 & 0 \\ 0 & 0 & 0\end{pmatrix} \tag*{(20)}

The corresponding texture has the form Λ12kxky\Lambda_{12}k_xk_y, which is identical to the previous ones with an appropriate exchange of axes.

In the example just illustrated and for both directions of the Néel vector, the MPG and SG treatments yield identical momentum-space textures projected along the Néel vector. In addition, the MPG treatment evidences other ‘weak’ components of the textures in different directions, including a ‘weak FM’ component in the spin-flop phase. Clearly, this complete correspondence does not always hold when the magnetic moment are along a low-symmetry direction. An extreme case occur when the magnetic moments are along a completely generic direction [x,y,z][x,y,z], since in this case the MPG analysis yields six independent components along [x,y,z][x,y,z]. However, these situations are extremely rare, and can be usually resolved within the MPG framework by rotating the magnetic moment along a high-symmetry direction (but see here below for the case of cubic groups).

Strong-collinear altermagnetism in cubic groups

The relation between the SG and MPG approaches becomes even clearer when considering the case of the cubic groups. Cubic MPGs do not admit collinear structures, since the direction of the magnetic moments always breaks the cubic symmetry. However, cubic symmetry can still hold in an approximate sense if the spin-lattice interaction is small. Highlighting these approximate symmetries and their effects on momentum-space textures is one of the main advantages of SGs, which are therefore an extremely useful complement to MPGs. As shown for other symmetries in sec. XII D, it is often possible to choose a high-symmetry spin direction where no space operator is lost, but this is clearly not possible for cubic groups. It is therefore useful to work our a cubic example in detail, so as to understand exactly how the two approaches are related.

Let us consider AFM ordering on a crystal with point group m3ˉmm\bar{3}m, such as the pyrochlore Er2_2Ru2_2O7_7 ((ref. 69)), in which cubic symmetry is broken by a collinear AFM structure. The magnetic moments are along the zz axis, and the MPG is 4m′m′m\frac{4}{m}^{\prime}m^{\prime}m (Class XI). The corresponding SG is m3ˉm~m\bar{3}\tilde{m} (full symbol 4ˉm3~2ˉm\frac{\bar{4}}{m}\tilde{3}\frac{\bar{2}}{m}) regardless of the direction of the magnetic moments, where, once again, SG space operators do not change the direction of the spins and the “~\tilde{}” symbol indicates spin flip. At the rank-7 level, the effective field components for the two cases are:

BSG(k)=Λ(k)(kx2−ky2)(kx2−kz2)(ky2−kz2)B^{SG}(\mathbf{k})=\Lambda(k)(k_x^2-k_y^2)(k_x^2-k_z^2)(k_y^2-k_z^2)
BzMPG(k)=BSG(k)+(kx2−ky2)(Λ1(k)kx2ky2+Λ2(k)(kx2+ky2)2+Λ3(k)kz4)(21)B_z^{MPG}(\mathbf{k})=B^{SG}(\mathbf{k})+(k_x^2-k_y^2)\left(\Lambda_1(k)k_x^2k_y^2+\Lambda_2(k)(k_x^2+k_y^2)^2+\Lambda_3(k)k_z^4\right) \tag*{(21)}

Corresponding MPG expressions for magnetic moment in other high-symmetry directions and in the appropriate coordinate systems are reported in Table III. For the tetragonal case, is clear that BSG(k)B^{SG}(\mathbf{k}) is the symmetrised version of BzMPG(k)B_z^{MPG}(\mathbf{k}), obtained by setting Λ1(k)=Λ2(k)=Λ3(k)=0\Lambda_1(k)=\Lambda_2(k)=\Lambda_3(k)=0. The additional components would emerge as a consequence of symmetry breaking, and can be reasonably expected to be small for a collinear structure where cubic symmetry is only broken by the spin system and spin-lattice interaction is weak. Figure 5 shows the texture pattern for BSG(k)B^{SG}(\mathbf{k}) (i.e., in the absence of the tetragonal terms). Figure 5 also shows that the scalar texture pattern is completely symmetric by the SG cubic symmetry operators, while the generic tetragonal, trigonal or orthorhombic textures for the corresponding MPGs would only have those specific symmetries.

Figure 5. Views along the [1] (a) and [111] (b) directions of the scalar texture pattern (i.e., the texture component along the direction of the magnetic moments) for MPG 4′/m′m′4^{\prime}/m^{\prime}m^{\prime} (symmetrised to cubic) or spin group 4~2m2m\tilde{4}\frac{2}{m}\frac{2}{m}. The normalisation function is as in previous figures. Contours were plotted for kz=1k_z = 1 and are both symmetric by exchange kz→−kzk_z \to-k_z. Panel (a) to be compared with fig. 2, sub-panel B6 of ref. 16.

For further clarity, views along different directions of these textures plotted on the surface of a sphere in momentum space are displayed in Figure 6. As remarked earlier, textures for different values of k=∣k∣k=|\mathbf{k}| only differ by the multiplicative function Λ(k)\Lambda(k) (see first line of eq. (21)).

Figure 6. Views along the [1] (a) and [111] (b) and [110] (c) directions of the scalar spin texture in Figure 5 plotted on the surface of a sphere in momentum space. Blue/red colours correspond to negative/positive values.

Discussion

In this paper, I have outlined a natural symmetry classification of all k/−kk/-k-symmetric, time-reversal-odd altermagnets, based on the lowest-rank altermagnetic tensor forms allowed in each magnetic point group (MPG). I have also tabulated all the higher-rank tensor forms required to describe ‘strong-collinear’ altermagnetic textures, i.e., those that produce spin splitting with quantisation axis parallel to the Néel vector. This include the case of cubic groups, where the spin-group formalism (thoroughly developed by other groups) [16] is most useful.

This classification has important practical consequences, particularly when one considers the tensorial connection between altermagnetism (which describes particular form of reciprocal-space spin textures) and well-known macroscopic properties such as piezomagnetism and the MOKE effect. For example, the Bilbao database MAGNDATA[35] lists 139 known materials that are MOKE active and do not allow ferromagnetism. The point groups of these materials are the same as those in classes V, VIII, IX, X, XI, XII, XIV, XV and XVII in which purely antiferromagnetic quadratic altermagnetism is allowed. In fact, most materials so far discussed in the context of altermagnetims (and many more) are well-known piezomagnets/MOKE-active AFM. Moreover, while a positive identification of altermagnetism as

distinct from time-even effects such as the surface R-D effect is rather difficult, detecting MOKE activity is rather straightforward and would enable screening of candidate materials for which the magnetic structural determination may be ambiguous.[71]

One may also observe that altermagnetism is allowed in 69 MPGs, of which 66 allow quadratic altermagnetism and 31 allow ferromagnetism. Considering that 32 MPGs are paramagnetic (grey), out of a total of 122 MPGs only 21 groups are black&white and do not allow altermagnetism, which is therefore hardly a rare phenomenon.

Although the purpose of this paper is mainly to discuss altermagnetic symmetry, a few words about ‘mechanisms’ do not seem inappropriate, particularly in connection with the role of the spin-orbit coupling (SOC). As already discussed in ref. 13, altermagnetic splitting is caused by the time-reversal-odd effective Zeeman fields (mostly of exchange origin) generated by real magnetic moments in the unit cell. Since the SO interaction is time-reversal even (its sources being the gradients of the electrical potential), at first sight it would seem that the SO interaction could not be responsible for k/−kk/-k-symmetric, time-reversal-odd altermagnetism.

However, this in not entirely correct, since the SOC can affect both the orientation of the localised magnetic moments and the spin density distribution, most famously by inducing spin canting via the Dzyaloshinskii-Moriya interaction. It is therefore likely that the SOC is responsible for ‘weak altermagnetism’,[26] particularly when spin splitting along a unique high-symmetry direction is not allowed at the lowest order (Classes VIII, XII, XIV, XV, XVII and XVIII). Interestingly, one must also expect to observe R-D-like, k/−kk/-k-antisymmetric splitting that is of pure magnetic origin, because magnetism ordering can break inversion symmetry. The two best-known cases of this phenomenon, described by Cheong et al. as ‘type-III altermagnetism’[20] and discussed theoretically in two recent publications,[74, 75] are helical magnetic structures and type-II multiferroicity, both of which can originate in centrosymmetric crystal due to competing interactions.[76] In both cases, the relevant properties (magnetic helicity and magnetic polarity, respectively) are time reversal even, so this materials do not violate the general rule that the spin splitting should be the same in time-reversed domains.

Tensor equalities and invariance

Equivalence of Cartesian and Spherical tensor decompositions

In general, Cartesian tensors like those in eq. 1 are members of the tensor product space ΓV⊗[ΓV⊗ΓV…]\Gamma^V \otimes[\Gamma^V \otimes\Gamma^V \ldots], where the square bracket indicates index symmetrisation while ΓV\Gamma^V is the representation of ordinary vectors, which coincides with the L=1L=1 irrep of SO(3)SO(3) (Γ1\Gamma^1) if one considers only proper rotations. In turn, [ΓV⊗ΓV…][\Gamma^V \otimes\Gamma^V \ldots] can be decomposed in SO(3)SO(3) irreps as follows:

[ΓV⊗ΓV]=Γ2+Γ0[\Gamma^V \otimes\Gamma^V] = \Gamma^2 + \Gamma^0
[ΓV⊗ΓV⊗ΓV]=Γ3+Γ1[\Gamma^V \otimes\Gamma^V \otimes\Gamma^V] = \Gamma^3 + \Gamma^1
[ΓV⊗ΓV⊗ΓV⊗ΓV]=Γ4+Γ2+Γ0[\Gamma^V \otimes\Gamma^V \otimes\Gamma^V \otimes\Gamma^V] = \Gamma^4 + \Gamma^2 + \Gamma^0
[ΓV⊗ΓV⊗ΓV⊗ΓV⊗ΓV]=Γ5+Γ3+Γ1[\Gamma^V \otimes\Gamma^V \otimes\Gamma^V \otimes\Gamma^V \otimes\Gamma^V] = \Gamma^5 + \Gamma^3 + \Gamma^1
…(22)\ldots \tag*{(22)}

where Γ2\Gamma^2, Γ3\Gamma^3, etc. are the irreps for L=2,3,…L=2,3,\ldots. Taking once again the tensor product with ΓV\Gamma^V

ΓV⊗[(ΓV)2]=Γ3+Γ2+2Γ1ΓV⊗[(ΓV)3]=Γ4+Γ3+2Γ2+Γ1+Γ0ΓV⊗[(ΓV)4]=Γ5+Γ4+2Γ3+Γ2+2Γ1ΓV⊗[(ΓV)5]=Γ6+Γ5+2Γ4+Γ3+2Γ2+Γ1+Γ0⋯(23)\begin{aligned} \Gamma^{V} \otimes[(\Gamma^{V})^{2}] &= \Gamma^{3} + \Gamma^{2} + 2\Gamma^{1} \\ \Gamma^{V} \otimes[(\Gamma^{V})^{3}] &= \Gamma^{4} + \Gamma^{3} + 2\Gamma^{2} + \Gamma^{1} + \Gamma^{0} \\ \Gamma^{V} \otimes[(\Gamma^{V})^{4}] &= \Gamma^{5} + \Gamma^{4} + 2\Gamma^{3} + \Gamma^{2} + 2\Gamma^{1} \\ \Gamma^{V} \otimes[(\Gamma^{V})^{5}] &= \Gamma^{6} + \Gamma^{5} + 2\Gamma^{4} + \Gamma^{3} + 2\Gamma^{2} + \Gamma^{1} + \Gamma^{0} \\ &\cdots \tag*{(23)} \end{aligned}

where I have used the shorthand (ΓV)2=ΓV⊗ΓV(\Gamma^{V})^{2} = \Gamma^{V} \otimes\Gamma^{V} etc. The spherical tensor decomposition is the familiar one:

Γ1⊗Γ0=Γ1Γ1⊗Γ1=Γ2+Γ1+Γ0Γ1⊗Γ2=Γ3+Γ2+Γ1Γ1⊗Γ3=Γ4+Γ3+Γ2Γ1⊗Γ4=Γ5+Γ4+Γ3Γ1⊗Γ5=Γ6+Γ5+Γ4⋯(24)\begin{aligned} \Gamma^{1} \otimes\Gamma^{0} &= \Gamma^{1} \\ \Gamma^{1} \otimes\Gamma^{1} &= \Gamma^{2} + \Gamma^{1} + \Gamma^{0} \\ \Gamma^{1} \otimes\Gamma^{2} &= \Gamma^{3} + \Gamma^{2} + \Gamma^{1} \\ \Gamma^{1} \otimes\Gamma^{3} &= \Gamma^{4} + \Gamma^{3} + \Gamma^{2} \\ \Gamma^{1} \otimes\Gamma^{4} &= \Gamma^{5} + \Gamma^{4} + \Gamma^{3} \\ \Gamma^{1} \otimes\Gamma^{5} &= \Gamma^{6} + \Gamma^{5} + \Gamma^{4} \\ &\cdots \tag*{(24)} \end{aligned}

So, for example, the sum of all the spherical harmonics terms in eq. (24) is:

∑n=05Γ1⊗Γn=Γ0+3Γ1+3Γ2+3Γ3+3Γ4+2Γ5+Γ6=ΓV⊗[(ΓV)4]+ΓV⊗[(ΓV)5](25)\begin{aligned} \sum_{n=0}^{5} \Gamma^{1} \otimes\Gamma^{n} &= \Gamma^{0} + 3\Gamma^{1} + 3\Gamma^{2} + 3\Gamma^{3} + 3\Gamma^{4} + 2\Gamma^{5} + \Gamma^{6} \\ &= \Gamma^{V} \otimes[(\Gamma^{V})^{4}] + \Gamma^{V} \otimes[(\Gamma^{V})^{5}] \tag*{(25)} \end{aligned}

We can therefore conclude that, if one considers only proper rotations (i.e., elements of the continuous group SO(3)SO(3)), the decomposition into spherical tensors of a vector field on a spherical shell up to order nn is equivalent to the sum of two Cartesian tensors of ranks nn and n+1n+1. Including parity and time reversal, it is found that the Cartesian tensors of odd rank are parity-even and time-reversal odd, while the Cartesian tensors of even rank are parity-odd and time-reversal even.

Tensor invariance

Here, I show that the symmetry of the global point-group symmetry of spin texture generated by a certain Cartesian tensor requires that tensor to be totally symmetric by the symmetry operations of that point group. In general, given a vector field V(k)\mathbf{V}(\mathbf{k}) and a proper rotation R\mathbf{R} the transformed vector field is:

V~(k)=R⋅V(R−1⋅k)(26)\widetilde{\mathbf{V}}(\mathbf{k}) = \mathbf{R} \cdot\mathbf{V}(\mathbf{R}^{-1} \cdot\mathbf{k}) \tag*{(26)}

Particularising to the case of Beff(k)\mathbf{B}^{eff}(\mathbf{k}) we obtain for proper rotations:

B~eff(k)=RijTj,αβγ…(n)Rρα−1Rσβ−1Rτγ−1kρkσkτ…=RijRραRσβRτγTj,αβγ…(n)kρkσkτ…(27)\begin{aligned} \widetilde{B}^{eff}(\mathbf{k}) &= R_{ij}T^{(n)}_{j,\alpha\beta\gamma\ldots}R^{-1}_{\rho\alpha}R^{-1}_{\sigma\beta}R^{-1}_{\tau\gamma}k_{\rho}k_{\sigma}k_{\tau}\ldots\\ &= R_{ij}R_{\rho\alpha}R_{\sigma\beta}R_{\tau\gamma}T^{(n)}_{j,\alpha\beta\gamma\ldots}k_{\rho}k_{\sigma}k_{\tau}\ldots \tag*{(27)} \end{aligned}

After some bookkeeping can generalise this to proper/improper rotations that may include time reversal by considering that k\mathbf{k} is time-reversal-odd and parity-odd, as:

B~eff(k)=(−1)(n+1)p+ntRijRραRσβRτγ…Tj,αβγ…(n)kρkσkτ…(28)\widetilde{B}^{eff}(\mathbf{k}) = (-1)^{(n+1)p+nt} R_{ij}R_{\rho\alpha}R_{\sigma\beta}R_{\tau\gamma}\ldots T^{(n)}_{j,\alpha\beta\gamma\ldots}k_{\rho}k_{\sigma}k_{\tau}\ldots \tag*{(28)}

If we now require that, ∀k\forall\mathbf{k}, B~eff(k)=Beff(k)\widetilde{\mathbf{B}}^{eff}(\mathbf{k})=\mathbf{B}^{eff}(\mathbf{k}), we conclude:

(−1)(n+1)p+ntRijRραRσβRτγ…Tj,αβγ…(n)=Ti,ρστ…(n)(29)(-1)^{(n+1)p+nt}R_{ij}R_{\rho\alpha}R_{\sigma\beta}R_{\tau\gamma}\ldots T_{j,\alpha\beta\gamma\ldots}^{(n)}=T_{i,\rho\sigma\tau\ldots}^{(n)} \tag*{(29)}

which is precisely the definition of a tensor that is totally symmetric by a generalised rotation R\mathbf{R} that may include inversion and time reversal

Spherical basis tensors

In Table Table IV, I present a decomposition of the 17 unique tensor forms for quadratic altermagnetism into a set of nine simple spherical basis tensors plus those obtained by axis permutations. Each of the 17 tensor forms can be obtained as a linear combination of the spherical basis tensors (Table V). For example, for Class V, we have:

(000Λ14000000Λ25000000Λ36)=Λ1QII+Λ2QIII+Λ3OI=Λ1(000−100000010000000)+Λ2(00010000001000000−2)+Λ3(000100000010000001)(30)\begin{aligned} \begin{pmatrix} 0 & 0 & 0 & \Lambda_{14} & 0 & 0 \\ 0 & 0 & 0 & 0 & \Lambda_{25} & 0 \\ 0 & 0 & 0 & 0 & 0 & \Lambda_{36} \end{pmatrix} =\Lambda_1 Q^{II}+\Lambda_2 Q^{III}+\Lambda_3 O^{I} \\ &=\Lambda_1\begin{pmatrix} 0 & 0 & 0 & -1 & 0 & 0 \\ 0 & 0 & 0 & 0 & 1 & 0 \\ 0 & 0 & 0 & 0 & 0 & 0 \end{pmatrix} +\Lambda_2\begin{pmatrix} 0 & 0 & 0 & 1 & 0 & 0 \\ 0 & 0 & 0 & 0 & 1 & 0 \\ 0 & 0 & 0 & 0 & 0 & -2 \end{pmatrix} +\Lambda_3\begin{pmatrix} 0 & 0 & 0 & 1 & 0 & 0 \\ 0 & 0 & 0 & 0 & 1 & 0 \\ 0 & 0 & 0 & 0 & 0 & 1 \end{pmatrix} \tag*{(30)} \end{aligned}

with

Λ14=−Λ1+Λ2+Λ3\Lambda_{14}=-\Lambda_1+\Lambda_2+\Lambda_3
Λ25=Λ1+Λ2+Λ3\Lambda_{25}=\Lambda_1+\Lambda_2+\Lambda_3
Λ36=−2Λ2+Λ3(31)\Lambda_{36}=-2\Lambda_2+\Lambda_3 \tag*{(31)}

Binary spin groups in the time-reversal language

Spin groups (SG) are generally defined as subgroups of the outer direct product of a point (or space) group and a spin rotation group.[28] The simplest non-trivial SGs are binary SG, in which the group acting on spins is a 2-element set. To classify collinear structures Šmejkal et al. adopt the two-element group {1,2z}\{1,2_z\}, where 1 is the identity and 2z2_z is a 2-fold rotation perpendicular to the Néel vector. Another choice is to use the two-element group {1,1′}\{1,1'\}, where 1′1' is the time reversal operator. With either choice, binary SG coincide with the the celebrated Shubnikov groups.[77] The only difference between binary SG with the time-reversal operator and the MPG treatment (which also employs Shubnikov point groups) is that binary SG are made to act on scalar, time-reversal-odd textures both in real and in reciprocal space (space operators have no effect on scalars), while MPGs act on axial-vector, time-reversal-odd textures. For binary SGs, I have indicated the time-reversal operator with the symbol “ ~\widetilde{\ }” to distinguish it from the MPG equivalent, indicated with a prime (’) This choice enables one to recast the action of binary SGs onto the familiar language of parity, time reversal etc., and to derive a parallel tensorial treatment to that of MPGs.

For a given collinear structure, converting SG into MPGs and vice versa requires at the very least knowledge of the direction of the Néel vector. However, in the presence of pseudo-symmetry (i.e., when crystal symmetry is broken only by the direction of the magnetic moments), there is no simple correspondence between its MPGs and binary SG, with the latter generally having more symmetry operators than the former. For example, for a tetragonal structure with binary SG 4mm~m\frac{4}{m}\widetilde{m}m, the MPG is 4mmm′\frac{4}{m}mm' for magnetic moments along the zz axis and m′m′mm'm'm or mm′m′mm'm' for Néel vector along xx and yy, respectively. Several examples of these conversions are given in sec. XII.

Construction of gnomonic projections from band dispersions

Here, I explain how to construct gnomonic projections of spin textures, similar to those displayed in the figures of sec. XII, starting from spin-polarised band dispersions such as those obtained from DFT calculations. One starts by calculating a grid of points at constant k=∣k∣k = |\mathbf{k}| for a particular band. It is most convenient to calculate points at constant θ\theta and equal intervals Δϕ\Delta\phi, where kk, θ\theta and ϕ\phi are spherical coordinates in momentum space. To reproduce the figures of sec. XII, one plots the spin polarisation for points at constant θ\theta on a circle of radius tan⁡θ\tan\theta and with the original values of ϕ\phi. Figures constructed from points calculated by DFT will include the pre-factors Λi(k)\Lambda_i(k), which depend on both kk and the band index. Moreover, one may require higher-rank tensors than those discussed in the paper to reproduce DFT data accurately.

Acknowledgments

I acknowledge discussions with A. Stroppa (CNR-SPIN), Roger D. Johnson (University College London), Dmitry Khalyavin (STFC UKRI) and Gautam Gurung (Trinity College, Oxford).

Spherical formxyz
DID^{I}(111000000000000000)\begin{pmatrix}1&1&1&0&0&0\\0&0&0&0&0&0\\0&0&0&0&0&0\end{pmatrix}(000000111000000000)\begin{pmatrix}0&0&0&0&0&0\\1&1&1&0&0&0\\0&0&0&0&0&0\end{pmatrix}(000000111000000000)\begin{pmatrix}0&0&0&0&0&0\\1&1&1&0&0&0\\0&0&0&0&0&0\end{pmatrix}
DIID^{II}(110000000001000000)\begin{pmatrix}1&1&0&0&0&0\\0&0&0&0&0&1\\0&0&0&0&0&0\end{pmatrix}(000001010000000100)\begin{pmatrix}0&0&0&0&0&1\\0&1&0&0&0&0\\0&0&0&1&0&0\end{pmatrix}(000000000100000000)\begin{pmatrix}0&0&0&0&0&0\\0&0&0&1&0&0\\0&0&0&0&0&0\end{pmatrix}
QIQ^{I}(01−100000000−1000010)\begin{pmatrix}0&1&-1&0&0&0\\0&0&0&0&0&-1\\0&0&0&0&1&0\end{pmatrix}(000001−100000000−100)\begin{pmatrix}0&0&0&0&0&1\\-1&0&0&0&0&0\\0&0&0&-1&0&0\end{pmatrix}
QIIQ^{II}(000−100000000000010)\begin{pmatrix}0&0&0&-1&0&0\\0&0&0&0&0&0\\0&0&0&0&1&0\end{pmatrix}
QIIIQ^{III}(00010000001000000−2)\begin{pmatrix}0&0&0&1&0&0\\0&0&0&0&1&0\\0&0&0&0&0&-2\end{pmatrix}
OIO^{I}(000100000010000001)\begin{pmatrix}0&0&0&1&0&0\\0&0&0&0&1&0\\0&0&0&0&0&1\end{pmatrix}
OIIO^{II}(000020000−2001−10000)\begin{pmatrix}0&0&0&0&2&0\\0&0&0&-2&0&0\\1&-1&0&0&0&0\end{pmatrix}
OIIIO^{III}(−110000000002000000)\begin{pmatrix}-1&1&0&0&0&0\\0&0&0&0&0&2\\0&0&0&0&0&0\end{pmatrix}(0000021−10000000000)\begin{pmatrix}0&0&0&0&0&2\\1&-1&0&0&0&0\\0&0&0&0&0&0\end{pmatrix}
OIVO^{IV}(−211000000002000000)\begin{pmatrix}-2&1&1&0&0&0\\0&0&0&0&0&2\\0&0&0&0&0&0\end{pmatrix}(0000021−21000000200)\begin{pmatrix}0&0&0&0&0&2\\1&-2&1&0&0&0\\0&0&0&2&0&0\end{pmatrix}(00002011−2000000200)\begin{pmatrix}0&0&0&0&2&0\\1&1&-2&0&0&0\\0&0&0&2&0&0\end{pmatrix}

Table 4. Symmetry-adapted spherical basis tensors employed for the decomposition of the altermagnetic tensor in each of the 17 classes (see Table I). The basis tensors are constructed from 9 unique forms (two dipolar, three quadrupolar and four octupolar) and their axis permutations. Only permutations actually employed in the decomposition are listed.

References

  1. [1]1 G. Dresselhaus, Physical Review 100, 580 (1955).
  2. [2]2 E. I. Rashba and V. Sheka, Fiz. Tverd. Tela: Collected Papers 2, 62 (1959).
  3. [3]3 A. Manchon, H. C. Koo, J. Nitta, S. M. Frolov, and R. A. Duine, Nature Materials 2015 14:9 14, 871 (2015), arXiv:1507.02408.DOI
  4. [4]4 G. Bihlmayer, O. Rader, and R. Winkler, New Journal of Physics 17, 050202 (2015).
  5. [5]5 L. Šmejkal, L. Šmejkal, L. Šmejkal, R. González-Hernández, R. González-Hernández, T. Jungwirth, T. Jungwirth, J. Sinova, and J. Sinova, Science Advances 6 (2020).
  6. [6]6 K. H. Ahn, A. Hariki, K. W. Lee, and J. Kuneš, Physical Review B 99, 184432 (2019), arXiv:1902.04436.DOI
  7. [7]7 M. Naka, S. Hayami, H. Kusunose, Y. Yanagi, Y. Motome, and H. Seo, Nature Communications 2019 10:1 10, 1 (2019), arXiv:1902.02506.DOI
  8. [8]8 M. Naka, S. Hayami, H. Kusunose, Y. Yanagi, Y. Motome, and H. Seo, Physical Review B 102, 075112 (2020), arXiv:2004.04578.DOI
  9. [9]9 S. Hayami, Y. Yanagi, and H. Kusunose, https://doi.org/10.7566/JPSJ.88.123702 88, 123702 (2019), arXiv:1908.08680.
  10. [10]10 S. Hayami, Y. Yanagi, and H. Kusunose, Physical Review B 102, 144441 (2020).
  11. [11]11 S. Hayami and H. Kusunose, JOURNAL OF THE PHYSICAL SOCIETY OF JAPAN 93 (2024), 10.7566/JPSJ.93.072001.DOI
  12. [12]12 M. Naka, Y. Motome, and H. Seo, Physical Review B 103, 125114 (2021), arXiv:2011.12459.DOI
  13. [13]13 L. D. Yuan, Z. Wang, J. W. Luo, E. I. Rashba, and A. Zunger, Physical Review B 102, 014422 (2020), arXiv:1912.12689.DOI
  14. [14]14 L. D. Yuan, Z. Wang, J. W. Luo, and A. Zunger, Physical Review Materials 5, 014409 (2021), arXiv:2008.08532.DOI
  15. [15]15 R. González-Hernández, L. Šmejkal, K. Výborný, Y. Yahagi, J. Sinova, T. Jungwirth, and J. Železný, Physical Review Letters 126, 127701 (2021), arXiv:2002.07073.DOI
  16. [16]16 L. Šmejkal, J. Sinova, and T. Jungwirth, Physical Review X 12, 031042 (2022).
  17. [17]17 L. Šmejkal, J. Sinova, and T. Jungwirth, Physical Review X 12, 040501 (2022), arXiv:2204.10844.arXiv
  18. [18]18 Y. Liu, J. Li, P. Liu, and Q. Liu, (2023), arXiv:2306.16312.DOI
  19. [19]19 P. A. McClarty and J. G. Rau, Physical Review Letters 132, 176702 (2024), arXiv:2308.04484.DOI
  20. [20]20 S. W. Cheong and F. T. Huang, npj Quantum Materials 2024 9:1 9, 1 (2024).
  21. [21]21 K. Samanta, M. Leaić, M. Merte, F. Freimuth, S. Blügel, and Y. Mokrousov, Journal of Applied Physics 127, 213904 (2020), arXiv:2002.05393.
  22. [22]22 Z. Feng, X. Zhou, L. Šmejkal, L. Wu, Z. Zhu, H. Guo, R. González-Hernández, X. Wang, H. Yan, P. Qin, X. Zhang, H. Wu, H. Chen, Z. Meng, L. Liu, Z. Xia, J. Sinova, T. Jungwirth, and Z. Liu, Nature Electronics 2022 5:11 5, 735 (2022).
  23. [23]23 H. Bai, Y. C. Zhang, Y. J. Zhou, P. Chen, C. H. Wang, L. Han, W. X. Zhu, S. X. Liang, Y. C. Su, X. F. Han, F. Pan, and C. Song, Physical Review Letters 130, 216701 (2023).
  24. [24]24 S. Reimers, L. Odenbreit, L. Šmejkal, V. N. Strocov, P. Constantinou, A. B. Hellenes, R. Jaeschke Ubiergo, W. H. Campos, V. K. Bharadwaj, A. Chakraborty, T. Deneulin, W. Shi, R. E. Dunin-Borkowski, S. Das, M. K. Kläui, J. Sinova, and M. Jourdan, Nature Communications 2024 15:1 15, 1 (2024), arXiv:2310.17280.
  25. [25]25 T. Osumi, S. Souma, T. Aoyama, K. Yamauchi, A. Honma, K. Nakayama, T. Takahashi, K. Ohgushi, and T. Sato, Physical Review B 109, 115102 (2024), arXiv:2308.10117.DOI
  26. [26]26 J. Krempaský, L. Šmejkal, S. W. D’Souza, M. Hajlaoui, G. Springholz, K. Uhlířová, F. Alarab, P. C. Constantinou, V. Strocov, D. Usanov, W. R. Pudelko, R. González-Hernández, A. Birk Hellenes, Z. Jansa, H. Reichlová, Z. Šobáň, R. D. González Betancourt, P. Wadley, J. Sinova, D. Kriegner, J. Minár, J. H. Dil, and T. Jungwirth, Nature 626, 517 (2024), arXiv:2308.10681.
  27. [28]28 D. B. Litvin, Acta Crystallographica Section A 33, 279 (1977).
  28. [29]29 P. Liu, J. Li, J. Han, X. Wang, and Q. Liu, Physical Review X 12, 021016 (2022), arXiv:2103.15723.
  29. [33]33 I. E. Dzialoshinskii, J. Exptl. Theoret. Phys. (U.S.S.R.) 33, 33, 807 (1957), [JETP 6, 621 (1958)].
  30. [34]34 F. J. Kahn, P. S. Pershan, and J. P. Remeika, Physical Review 186, 891 (1969).
  31. [35]S. V. Gallego, J. M. Perez-Mato, L. Elcoro, E. S. Tasci, R. M. Hanson, M. I. Aroyo, and G. Madariaga, urn:issn:1600-5767 49, 1941 (2016).
  32. [37]P. Tang, Q. Zhou, G. Xu, and S. C. Zhang, Nature Physics 2016 12:12 12, 1100 (2016), arXiv:1603.08060.DOI
  33. [38]An example of this is MPG 3m′, which is admissible (i.e., compatible with ferromagnetism), polar, magneto-electric and altermagnetic.
  34. [39]H. A. Jahn, Acta Crystallographica 2, 30 (1949).
  35. [40]A. S. Borovik-Romanov, Soviet Physics JTP 11, 1088 (1960), [Sov. Phys. JETP 11, 786 (1960)].
  36. [41]R. R. Birss (North-Holland Pub. Co., Amsterdam, 1966) 2nd ed., pp. 140–145.
  37. [42]G. A. Smolenskii, R. V. Pisarev, and I. G. Sinitsii, Soviet Physics - Uspekhi 18, 410 (1975).
  38. [43]V. Zubov, G. Krinchik, V. Seleznev, and M. Strugatskij, Zhurnal Ehksperimental’noj i Teoreticheskoj Fiziki 94, 290 (1988).
  39. [44]A. V. Zenkov, B. B. Krichevtsov, A. S. Moskvin, K. M. Mukimov, R. V. Pisarev, and M. M. Ruvinshtejn, Zhurnal Ehksperimental’noj i Teoreticheskoj Fiziki; (USSR) 96:10 (1989).
  40. [45]V. V. Eremenko, N. F. Kharchenko, Y. G. Litvinenko, and V. M. Naumenko, Magneto-Optics and Spectroscopy of Antiferromagnets (Springer, New York, 1992).DOI
  41. [46]T. Higo, H. Man, D. B. Gopman, L. Wu, T. Koretsune, O. M. Van ’T Erve, Y. P. Kabanov, D. Rees, Y. Li, M. T. Suzuki, S. Patankar, M. Ikhlas, C. L. Chien, R. Arita, R. D. Shull, J. Orenstein, and S. Nakatsuji, Nature Photonics 2018 12:2 12, 73 (2018), arXiv:1805.06758.DOI
  42. [47]K. Kang, K. Yang, K. Puthalath, D. G. Cahill, and A. Schleife, PHYSICAL REVIEW B 105, 184404 (2022).
  43. [48]S. V. Gallego, J. Etxebarria, L. Elcoro, E. S. Tasci, and J. M. Perez-Mato, Acta Crystallographica Section A 75, 438 (2019).
  44. [71]P. Keßler, L. Garcia-Gassull, A. Suter, T. Prokscha, Z. Salman, D. Khalyavin, P. Manuel, F. Orlandi, I. I. Mazin, R. Valenti, and S. Moser, (2024), arXiv:2405.10820.
  45. [72]S. M. Wu, W. Zhang, A. Kc, P. Borisov, J. E. Pearson, J. S. Jiang, D. Lederman, A. Hoffmann, and A. Bhattacharya, Physical Review Letters 116, 097204 (2016), arXiv:1509.00439.
  46. [73]Half-filled-shell ions such as Fe$^{3+}$ have smaller anisotropies, but even in such cases spin-lattice coupling and the Dzyaloshinskii-Moriya interaction cannot be neglected.
  47. [74]S. Hayami, Physical Review B 105, 024413 (2022).
  48. [75]A. B. Hellenes, T. Jungwirth, R. Jaeschke-Ubiergo, A. Chakraborty, J. Sinova, and L. Šmejkal, (2023), arXiv:2309.01607.arXiv
  49. [76]Altermagnetism as defined in this paper is not allowed in paramagnetic (grey) point groups. However, many antiferromagnets (especially incommensurate AFMs) possess paramagnetic MPGs, because in there MSG time reversal is equivalent to a (potentially incommensurate) translation U — in other words, Uθ is a symmetry operator. This is the case for most (but not all) non-Γ-point AFMs. If, in addition, inversion is broken, these systems are candidates for ‘Type III altermagnetism’. A systematic treatment of these system similar to the one presented here should be possible since, even in the most complex cases, one can always define a MPG.{citep}`80`
  50. [77]W. Opechowski and R. Guccione, in Magnetism, Vol. 2A, edited by G. T. Rado and H. Suhl (Academic Press, New York, 1965).
  51. [79]E. F. Bertaut, Acta Crystallographica Section A 24, 217 (1968).

Paper details

vlnc:W_fpqrk8cu
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents