WorksPhysics and Astronomy
Propagation invariant one-dimensional flat-top vector beam with conserved topology
Abstract
We report the generation and control of a propagation invariant one-dimensional flat-top vector beam through the digitally controlled superposition of a first-order petal- and Gaussian- mode each marked with orthogonal polarizations. We present a detailed analysis of the spatial and polarization profiles and unveil their intricate topological features, showing that they have properties that are invariant to the propagation dynamics, in addition to their preserved intensity. The differential Gouy phase between the spatial components is shown to rotate the great circle traced by the polarisation distribution on the Poincaré sphere. Finally, we assess the beams for laser cutting and optical trapping, highlighting the relevance of topological structured light to these applications.
Introduction
Structured light enables the tailoring of optical fields through control of their wavelength, spatial amplitude and phase, and polarisation [1, 2]. In particular, simultaneous control of the polarisation and spatial components of light has enabled the realisation of optical fields with tailored polarisation textures carrying singularities [3, 4], knots [5, 6], links [7], Möbius strips [1, 8] and skyrmionic topologies [9, 10]. This capability is supported by an expanding toolbox that includes tailored metasurfaces and engineered materials [11, 12], static liquid-crystal devices such as q-plates [13], dynamic liquid-crystal devices such as spatial light modulators (SLMs) [14, 15], and digital micromirror devices [16, 17].
Beyond creating complex polarisation textures, the joint control of polarisation and spatial mode shaping provides a means of engineering the intensity profile of light and its evolution during propagation. This principle has enabled the generation of vector flat-top beams whose transverse intensity shape is preserved during propagation, apart from an overall change in scale [18, 19]. This is achieved by combining complementary spatial profiles in orthogonal polarisation components where their intensities can be added without interference to produce a desired beam shape. Such designs address the limitation of conventional flat-top shaping approaches that produce the desired profile only near a prescribed plane, with demonstrated applications in optical trapping and tweezing [20]. However, these existing vector flat-top designs focused on cylindrically symmetric intensity profiles. Extending this approach beyond cylindrical symmetry, while preserving the transverse intensity shape during propagation and enabling flexible control of its geometry and orientation, remains unexplored.
Here, we address this limitation by presenting a one-dimensional flat-top vector beam that preserves both its intensity profile and polarisation topology under free-space propagation. Unlike conventional flat-top approaches, which rely on fixed optical elements and produce profiles valid only near a prescribed plane, our approach exploits the digital control afforded by a spatial light modulator to generate and reconfigure the beam in real time. The resulting field is nonseparable in its spatial and polarisation degrees of freedom, and we show that its polarisation structure traces a stable great circle on the Poincaré sphere during propagation - a topological feature characterised by a conserved integer winding number. We demonstrate the practical utility of this control through applications in laser cutting and optical trapping.
Theory
We generated a one-dimensional flattop by superimposing natural modes of free space, i.e., Laguerre-Gaussian beams that are orthogonally polarized, as shown in Figure 1 (a) at the plane, producing the field

Figure 1. (a) Generation principle of a one-dimensional vector flat-top beam. A horizontally polarised () petal mode is coherently superposed with a vertically () polarised Gaussian mode to produce a vector flat-top beam with a spatially inhomogeneous polarisation distribution. (b) Experimental setup for generating and characterising the vector beam. The generation scheme consists of lenses (L) for beam expansion onto a Spatial light modulator (SLM) for independent beam generation and a Sagnac interferometer consisting of 2 mirrors (M) and a polarizing beam splitter (PBS) to superimpose the two orthogonally polarized beams. A set of polarisation optics, including half-wave plates (HWP), quarter-wave plate (QWP), and a polariser, enable Stokes polarimetric analysis at different propagation planes. (c) Experimental (black line plot) and numerically simulated (surface plots) near- and far- cross-sectional profiles of field intensity distributions (shown as insets), showing a flat-top distribution along the horizontal direction and a Gaussian distribution along the vertical direction. (d) Spatially-varying state of polarization (SOP) represented by local polarisation ellipses and corresponding polarisation state population plotted on the Poincaré sphere, reconstructed from the Stokes parameters, at propagation distances expressed relative to the Rayleigh range, . (e) Measured topological invariant and nonseparability, quantified by the vector quality factor (VQF), at each observation plane.
Here is the transverse coordinate vector, expressed as in polar coordinates or in Cartesian coordinates. The unit vectors and represent the horizontal and vertical polarisation states, which carry the superposition state and the Gaussian mode , respectively, where is the second-moment radius of the Gaussian envelope. The intensity profiles of these components and the resulting polarisation profile are shown in Figure 1 (a). The horizontally polarised superposition resembles a petal mode, with two intensity peaks at along the -axis. Here is the modal weighting parameter, where the flat-top condition is satisfied when , which equates the peak intensity of the petal mode to that of the Gaussian mode along the flat-top axis (see Supplement for derivation). However, because the two polarisation components have orthogonal spatial modes, the resulting field contains an inhomogeneous (spatially varying) polarisation profile.
Experimental realisation and results
To generate this field, we used the experimental setup shown in Figure 1 (b). A coherent laser beam was expanded onto a phase-only spatial light modulator (SLM) and structured using complex amplitude modulation to produce the desired beam profiles: the superposition on one half of the SLM and the mode on the other. The fields were separated from the zero diffraction order by spatial filtering in the far-field, and their polarisation was rotated to diagonal; subsequently, the desired vector beam was generated by superimposing both beams using a Sagnac interferometer (see [21]). Due to renormalisation of the SLM holograms and losses in the interferometer, the relative mode powers were readjusted by changing the grating depth to satisfy the peak-intensity matching condition, i.e. . Furthermore, imaging lenses mapped the fields from the SLM plane () onto the CCD camera, with half-wave plates (HWPs), quarter-wave plates (QWPs) and a polariser placed before the camera for polarisation and intensity analysis. To confirm the one-dimensional flat-top profile, we analysed the total beam intensity cross-sections along the Cartesian and directions in both the near field () and the far field (at the focus of a lens). The measured profiles (lines) and scaled theoretical/simulated profiles (shaded regions) are shown in Figure 1 (c), revealing a flat-top profile along and a Gaussian profile along . This contrasts with the two-dimensional flat-top field generated by Bhebhe et al. [18], which used a doughnut mode () in the horizontal component instead of a petal mode. Next we study the propagation-dependent dynamics and evolution of the polarisation structure. To do this, we measured the field at several propagation distances relative to the Rayleigh range of the Gaussian envelope, , where , followed by a final measurement in the far field. At each plane, Stokes polarimetry (see Supp.) was used to measure the local Stokes vector, , and total intensity, following the methods of Singh et al. [22]. The intensity profiles, overlaid with the polarisation ellipses representing the local state of polarization (SOP), are shown in the top panel of Figure 1 (d), revealing that the polarisation structure evolves upon propagation despite the one-dimensional flat-top profile being maintained. In the proceeding sections, we study our field’s polarization behaviour in more detail.
Nonseparability analysis
To quantify the vectorial characteristics of the one-dimensional flat-top beam, we measured its vector quality factor (VQF), a property that ranges from zero for a scalar field to unity for a maximally nonseparable spatial–polarisation field. Using the measured Stokes parameters obtained previously, we extracted the spatially integrated Stokes parameters, , giving
The theoretical value for the chosen mode weighting () is , compared with a measured value of at . Figure 1 (e) presents the VQF measured at each plane of propagation, with the measured VQF remaining approximately constant within experimental uncertainty (), showing that the nonseparability of the field remains preserved on propagation. It is important to note that since the VQF depends on the modal weighting , which determines the flatness of the beam profile, we can use the VQF as a quantitative measure of how well the flattop profile is retained under different transformations. We showed here that the flattop beam maintains a constant VQF in propagation; therefore, it follows that the flattop profile is invariant through propagation.
Polarisation evolution
The preservation of the VQF of the field follows from the fact that it undergoes a unitary evolution in propagation. To understand this behaviour, we generalise (S3) to include the propagation dependence, for . The field can therefore be written as (neglecting global phases)
Both the petal (horizontal polarisation) and Gaussian (vertical polarisation) modes maintain their intensity profiles during propagation, with rescaled sizes, explaining the preserved intensity shape, but a relative phase between the horizontal and vertical polarisation components emerges, which explains the changing polarization states. This is due to the differential Gouy phase generated by the spatial components: the Gaussian mode acquires a Gouy phase of , while the petal mode acquires . The latter inherits its Gouy phase from the modes, which acquire identical Gouy phases, giving a common phase to the horizontal polarisation component. Thus, as shown in Figure 1 (d), the relative phase between the two polarisation components drives the evolution of the polarisation structure while preserving the intensity profile.
Next, we analysed the nature of the populated states during the evolution by mapping the measured fields onto the Poincaré sphere at each measurement plane () using the normalised Stokes parameters, i.e. , s.t. at every point where the fields are defined. The experimental and theoretical/simulated results are shown in the bottom panel of Figure 1 (d). Given the cross-sectional symmetry of the polarisation profile about the -axis, it was sufficient to extract the Stokes parameters from a neighborhood of points around the cross-section, across all positions where the intensity is defined. Both experiment and simulation show that, at , the polarisation states form a closed loop along the equator of the Poincaré sphere. During propagation, this loop rotates about the axis while remaining closed, signaling a smooth deformation that does not change the intensity but also preserves the mapping onto a closed loop. To examine the topological nature of this mapping, we calculated the theoretical normalised Stokes parameters for the field in (S8), yielding the vector
where the function with maps to the domain . The polarisation evolution corresponds to a rotation of the populated great circle on the Poincaré sphere through an angle twice the relative phase (differential Gouy phase) as the beam propagates. Accordingly, the normalised Stokes parameters thus define a mapping from the spatial coordinate, through , onto this great circle. Since the field satisfies , the two spatial limits can be identified, satisfying the one-point compactification condition for the real line, . The Gouy phase evolution continuously deforms the polarisation texture while keeping it constrained to a great circle. Within this constraint, the resulting mapping admits an integer winding number, classified by the first homotopy group, , and is measured from (with more details given in the supplementary material)
where defines a segment on the great circle, tangent to each point, and is the Stokes phase defined as , where and are chosen such that is defined orthogonal to the great circle. The measured and simulated results for this are shown in Figure 1 (e), presenting an average winding number of for the measured planes with a standard deviation of , therefore confirming the topological stability with propagation.
propagation. This winding number describes how many times the polarisation states wrap around the Poincaré sphere on the constrained great circle while the field evolves. Additionally, the sign of the winding number can be changed by performing a swapping operation of the polarization components in the field function (i.e. ). The sub-unity value of is consistent with the expected numerical uncertainty arising from the discrete integration of the winding number along a finite path length, and from residual experimental noise in the measured Stokes parameters. It does not indicate a physical deviation from integer topology. The agreement between the measured and simulated winding numbers, both remaining constant across all observation planes, confirms the topological stability of the field. The derived 1D topology observed here arises as a result of the annihilation of optical Skyrmions with opposite vorticity [23], which can be identified by partitioning Eq. (8) into two distinct vector modes, each carrying a vertically polarized Gaussian component and distinct horizontally polarized LG components.
Analysis for laser cutting and optical trapping
Next, we demonstrate the utility of our digital encoding approach of the one-dimensional flat-top for laser cutting and optical trapping. In laser cutting applications, dynamic control of the beam can be advantageous in free-form laser ablation. We demonstrate how our digital approach enables this control through a single beam parameter, without mechanically or physically rotating any optics or a sample. The results for this are shown in Figure 2 (a), where the flat-top is physically rotated in the x-y plane by controlling the intermodal phase, , between the horizontally polarized LG modes, i.e. . Here, the inter-modal phase is varied from 0 to , where the axis in which the flattop profile exists rotates with changing . Given an SLM with bit depth , the achievable resolution in rotation can reach up to and can be increased using SLMs with higher bit depths. Moreover, the orientation of the field is independent of the relative phase between the polarisation components (as was seen in the propagation analysis), making it insensitive to fluctuations in the interferometer. Since control over the intermodal phase is achieved through digital encoding on the SLM, our method offers an easily accessible degree of freedom for flattop beam shaping to achieve more diverse optical traps and enhanced control of laser cutting configurations. The ability to easily tune the phase and rotate the beam can be useful in creating a laser cutting system that can be used on both thin materials for fine detailed cuts and on thicker materials. Moreover, this rapid tunability allows one to trace out more complex and detailed curves to cut, as shown in Figure 2 (b). Flat-top beams and Gaussian beams have both been well researched for applications in optical trapping and laser cutting, both offering unique advantages and disadvantages depending on the application [20, 24, 25, 26]. In laser cutting applications, the beam profile influences the cut quality, surface and edge finish, power distribution, and more [27]. Gaussian beams have their intensity concentrated around a single peak; therefore, one can achieve a tighter focus and higher peak intensity, which is useful for fine, detailed cutting on thin objects. However, the Gaussian profile decays rapidly away from the center; this will affect cut quality on thicker objects and will create more slanted kerfs. Flattop beams have uniform intensity across a region and have steeper edges; therefore, the power distribution is more consistent through the cut and leaves straighter kerfs and higher-quality cuts on thicker objects. Because our 1D flattop beam has both Gaussian and flattop profiles in different axes, one can achieve laser cutting that contains the advantages of both beam profiles. For uses in optical trapping, we analyse the force field of an optical trap from the intensity of the beam, , where the constant depends on the properties of the trapped particle and the medium of the trap [28, 29]. Figure 2 (c) shows the experimental and simulated plots of the magnitude of the force field of our 1D flattop, thereby highlighting its trapping landscape. In an optical trap setup, a particle would be pushed to the central region of low strength. More interestingly, we observe that the field has a much wider trap region along the axis with a flat-top profile and a sharper trap region along the axis with a Gaussian profile, . The experimental cross sections (lines) and the theoretical cross-sections (shaded region) are shown in Figure 2 (c). This may be useful for trapping particles more tightly in one axis and allowing them to move more freely in another axis. Moreover, because the orientation of the flat-top can be digitally controlled, one can manipulate the trajectory of the trapped particles in any direction on the x-y plane.

Figure 2. (a) Digital tuning of the flat-top orientation through intramodal phase, , control with experimental and simulated intensity profiles shown for selected values. (b) Application of digital orientation control for precise laser cutting along predefined segmented curves. (c) Trapping-force distribution inferred from the measured intensity of the 1D flat-top beam, showing a narrower trapping region along the Gaussian axis and a broader region along the flat-top axis. Insets show cross-sectional trapping-force profiles and the force vector field.
Discussion and conclusion
Here we have engineered a one-dimensional vector flat-top beam by superimposing propagation-invariant spatial patterns marked with orthogonal polarisations. We showed that the resulting field preserves its intensity and orientation, remaining a flat-top along a single axis, during propagation. Furthermore, we quantified the vectorial nature of the beam using its VQF and identified that its polarization distribution forms a great circle on the Poincaré sphere. Complementary to the 1D flat-top nature of the field, we identified that the polarization great circle can be identified along the flat-top axis, thereby forming the mapping that can be characterized by a well-defined integer topological winding number . Furthermore, we found that the polarization great circle would rotate in propagation due to propagation induced Gouy-phase while the VQF and would remain unchanged. Finally, by demonstrating control over the 1D flat-top axis, we proposed the usage of such beams for laser cutting over predefined paths and furthermore, by quantifying the trapping force of the field, we identified its inherent asymmetric trapping landscape, which may allow for more diverse trapping capabilities. The approach demonstrated here is not limited to the specific mode superposition employed, and may be extended to other mode families or higher-dimensional flat-top profiles, opening a route toward reconfigurable vectorial beam shaping for a broad range of structured-light applications.
Funding
C.M. acknowledges support from the South African Quantum Technology Initiative (SA QuTI). P.O. acknowledges support from the DSTI-CSIR Interprogramme Bursary Scheme. I.N. and A.D. acknowledge support from the DSI-CSIR Rental Pool Programme. A.F. acknowledges support from the Oppenheimer Memorial Trust (OMT), the South African Quantum Technology Initiative (SA QuTI) and the DSI-CSIR Rental Pool Programme. Y.C. and M.C. acknowledge support from the National Natural Science Foundation of China (Grant No. 62575227, 62231021, U254120011) and Shaanxi Project for Basic Scientific Research in Mathematics and Physics (Grant No. 25JSQ005).
Acknowledgments
The authors would like to acknowledge Lehloa Mohapi for his initial work on the project.
obtained from the authors upon reasonable request.
Disclosures
The authors have no conflicts of interest to declare
Data availability
The underlying data for the results presented in this paper are not publicly available. The data may be obtained from the authors upon reasonable request.
Supplementary: Derivation of coefficients
The flat-top field at plane is given by
where the unit vectors and represent the horizontal and vertical polarisation states, respectively; determines the weighting of the two beams on the total field; and is the Laguerre-Gaussian mode equation given as
Here, the and represent the azimuthal and radial indices, is the encoded beam waist, is the generalised Laguerre polynomials, and is the Gouy phase acquired by the beam through propagation.
To derive the appropriate coefficient for a flat-top beam, we consider the simplest case, , such that the field reduces to
and the intensity of the whole field becomes
From this, we can calculate the positions at which the intensity is maximum using the first derivative of the intensity
Solving for , we get 3 roots
We can use 2 of the roots to find the coefficient . For a flattop, we ideally want the peak intensity of the Gaussian, which is at , to be equal to the peak intensity of the superposition mode, which will be at and ; therefore, to solve for alpha, we can take
Supplementary: Evolution of polarization and topology in propagation
As given by Eq. (3) in the main text, the field under propagation can be written as (neglecting global phases)
Locally normalizing the field such that , and rewriting in cartesian coordinates the above expression can be further simplified to
where is the normalized -coordinate scaled under propagation with the assumption that . In this form, it is clear that the field has no dependency on the -coordinate, with relative amplitude changes occurring between the two polarized components as we sweep across the -coordinate. At , sweeping across results in a rotation of the polarization state from vertical at to diagonal at and anti-diagonal at and finally to horizontal as . In propagation the field accumulates relative phase between the two orthogonally polarized components. The relative phase increases monotonically as with . As the field is allowed to propagate to the far-field ( or ) we have that , thereby altering the polarization behaviour across . Whilst the polarization at the points and remain fixed we find that at we now find left and right circular polarization, respectively. Therefore, whilst the propagation leaves the boundaries of the field unchanged in both polarization and intensity (as discussed in main text), the evolution of the polarization states change in propagation, tracing a great circle over the Poincaré sphere that rotates upon propagation, as further evidenced by Figure 1(d) in the main text.
To analyze the topological structure of the field, we can compute the locally normalized Stokes parameters which can be extracted directly from the field using the Hopf map,
, thereby yielding
If we let then we can simplify the above expressions using the identities and to
Here we are interested in studying the topological structure of our field and its evolution as the field propagates. It is simplest therefore to study the field at and then consider the transformation enacted upon propagation. Therefore at , the Stokes parameters are given simply by
At the above expression evaluates to and as we have . Therefore, is a map between where can be identified with a circle, , under one point compactification of the points at infinity, . The topological winding number, , of this map can be computed using
where . Using , and we get
Therefore, at the field winds around the once, this is consistent with the SOP and polarization population plotted in Figure 1 in the main text.
Next, we consider analyzing the winding number on propagation. In Figure 1 in the main text we observe that the great circle rotates about the axis. In fact, Eq. (17) and Eq. (18) are related through
where is a -dependent rotation matrix rotating the Stokes parameters about the axis. We note now that while does not change as the field propagates, decreases while increases. Therefore, if we consider evaluating the winding around the axis, we note that in propagation the vector field no longer traces out a circle of unit radius, rather an ellipse with a boundary defined by . We note here that while the winding about the axis collapses as , since , the winding around the axis at this point is exactly the same as that about the axis at , i.e, . Therefore, the winding number of the great circle is the same at and at . In between these planes we also anticipate the winding number to remain preserved, since propagation induces a simple rotation of the great circle traced out by the Stokes vector field. We can compute this explicitly however, which alters Eq. (20) to
where Since this integral is symmetric about the axis we can evaluate the integral in the domain and multiply the result by a factor of 2. Further, making the substitution yields the simplified integral
thereby confirming the numerical and experimental results shown in Figure 1 in the main results, the winding number is left unchanged on propagation.
Lastly, in the case where we switch the spatial modes of the polarization components we find that the component flips sign, which introduces a sign change in , which results in a sign change of the winding number.
Supplementary:Details of experiment and measurements
To verify the feasibility of the proposed method for generating vector flat-top beams, the experimental setup shown in Figure S1 was constructed. A linearly polarized beam with a wavelength of 633 nm emitted by a He–Ne laser was expanded and collimated to form an approximate plane wave using a beam-expansion system consisting of a microscope objective (OL) and lens L1, and was then directed onto a spatial light modulator (SLM). The active area of the SLM was equally divided into two halves, on which computer-generated holograms encoding the spatial modes and , were displayed to generate two spatially separated co-propagating spatial modes in reflection off the SLM, while preserving the polarization state of the incident light. The two beams subsequently passed through a 4 system composed of lenses L2 and L3 and an aperture placed at their common Fourier plane, where the aperture selected the first-order diffracted beams. A half-wave plate (HWP) was then used to polarization to diagonal polarization. In the vector-beam generation module, the beams entered a Sagnac interferometer comprising a polarizing beam splitter (PBS) and mirrors M2 and M3. The PBS separated the orthogonally polarized and components, which propagated in opposite directions and were subsequently recombined to synthesize the vector flat-top beam . The measurement system consisted of a HWP, a quarter-wave plate (QWP), a linear polarizer (LP), and a CCD camera, while a second system was employed for spatial filtering of the undesired field copies produced within the interferometer. By placing the CCD camera at the image plane and Fourier plane of the second system, the near-field and far-field distributions of the beam were measured, respectively. By adjusting the orientations of the HWP, QWP, and LP, the horizontal, vertical, diagonal, anti-diagonal, right-circularly polarized, and left-circularly polarized intensity components, denoted by , , , , , and , respectively, were recorded. The corresponding Stokes parameters, , , and were then calculated (with further details given in the proceeding section), enabling the reconstruction of the beam intensity and spatial polarization-state distributions at different propagation planes. This setup therefore provides a stable and comprehensive approach for generating, characterizing, and validating vector flat-top beams.

Figure S1. Experimental setup to generate and measure the one-dimensional flat-top vector beam.
Stokes polarimetry and non-separability (vector quality factor) analysis
To fully characterise a vector beam, the polarisation of the beam must be measured along with the spatial distribution. To measure the polarisation, Stokes polarimetry is performed on the beam to recover the Stokes parameters, which contain all the information about the intensity and polarisation state of the beam. Stokes polarimetry involves measuring the intensity of the 6 polarisation projections: Horizontal, ; Vertical, ; Diagonal, ; Anti-diagonal, ; Right-circular, ; and Left-circular polarisations, . The Stokes parameters are calculated from the intensity measurements as
Fig. S2 shows experimental measurements of the Stokes parameters. The Stokes parameters were measured at different propagation planes , where and finally at . While and remain the same, with rescaled sizes, in propagation, decreases in intensity while increases. This corroborates the result shown in Figure 1 (d) of the main text; the polarization loop rotates about as the magnitude of decreases and increases. Additionally, we calculate the degree of vectorness (VQF) of the beam from the Stokes parameters as follows
where, . To calculate the VQF of the 1D flattop field described in S1, we first describe the polarisation states in terms of their Jones vectors as
where and are the basis vectors. To simplify the calculation, we will integrate the intensity over the whole field such that the spatial distributions integrate to 1 and the intensities reduce to
For the case of , the Stokes parameters can be calculated to be and .

Figure S2. Stokes parameters , , and measured at different propagation planes
References
- [1]Andrew Forbes, Michael De Oliveira, and Mark R Dennis. Structured light. Nature photonics, 15(4):253–262, 2021. 1DOI
- [2]Halina Rubinsztein-Dunlop, Andrew Forbes, Michael V Berry, Mark R Dennis, David L Andrews, Masud Mansuripur, Cornelia Denz, Christina Alpmann, Peter Banzer, Thomas Bauer, et al. Roadmap on structured light. Journal of optics, 19(1):013001, 2017. 1
- [3]Mark R Dennis, Kevin O’Holleran, and Miles J Padgett. Singular optics: optical vortices and polarization singularities. In Progress in optics, volume 53, pages 293–336. Elsevier, 2009. 1
- [4]OV Angelsky, A Ya Bekshaev, MV Vasnetsov, C Yu Zenkova, PP Maksimyak, and Jun Zheng. Optical phase singularities: Physical nature, manifestations and applications. Frontiers in Physics, 10:1060787, 2022. 1DOI
- [5]Hugo Larocque, Danica Sugic, Dominic Mortimer, Alexander J Taylor, Robert Fickler, Robert W Boyd, Mark R Dennis, and Ebrahim Karimi. Reconstructing the topology of optical polarization knots. Nature Physics, 14(11):1079–1082, 2018. 1DOI
- [6]Mark R Dennis, Robert P King, Barry Jack, Kevin O’Holleran, and Miles J Padgett. Isolated optical vortex knots. Nature Physics, 6(2):118–121, 2010. 1DOI
- [7]Yaning Zhou, Nianjia Zhang, Ao Zhou, Zhao Zhang, Jinsong Liu, Chunhao Liang, Sergey A Ponomarenko, Qiwen Zhan, Yangjian Cai, and Xin Liu. Spatiotemporally localized optical links and knots. Nature Communications, 2026. 1DOI
- [8]Thomas Bauer, Peter Banzer, Ebrahim Karimi, Sergej Orlov, Andrea Rubano, Lorenzo Marrucci, Enrico Santamato, Robert W Boyd, and Gerd Leuchs. Observation of optical polarization möbius strips. Science, 347(6225):964–966, 2015. 1DOI
- [9]Yijie Shen, Eduardo Casas Martínez, and Carmelo Rosales-Guzmán. Generation of optical skyrmions with tunable topological textures. Acs Photonics, 9(1):296–303, 2022. 1DOI
- [10]Yijie Shen, Qiang Zhang, Peng Shi, Luping Du, Xiaocong Yuan, and Anatoly V Zayats. Optical skyrmions and other topological quasiparticles of light. Nature Photonics, 18(1):15–25, 2024. 1DOI
- [11]Ahmed H Dorrah and Federico Capasso. Tunable structured light with flat optics. Science, 376(6591):eabi6860, 2022. 1DOI
- [12]Jian Wang and Yize Liang. Generation and detection of structured light: a review. Frontiers in Physics, 9:688284, 2021. 1DOI
- [13]Andrea Rubano, Filippo Cardano, Bruno Piccirillo, and Lorenzo Marrucci. Q-plate technology: a progress review. Journal of the optical society of america B, 36(5):D70–D87, 2019. 1DOI
- [14]Carmelo Rosales-Guzmán and Andrew DW Forbes. Structured light with spatial light modulators. SPIE Bellingham, WA, USA, 2024. 1
- [15]Yiqian Yang, Andrew Forbes, and Liangcai Cao. A review of liquid crystal spatial light modulators: devices and applications. Opto-Electronic Science, 2(8):230026–1, 2023. 1DOI
- [16]Stirling Scholes, Ravin Kara, Jonathan Pinnell, Valeria Rodríguez-Fajardo, and Andrew Forbes. Structured light with digital micromirror devices: a guide to best practice. Optical Engineering, 59(4):041202–041202, 2020. 1DOI
- [17]Benjamin Perez-Garcia, Francisco I Mecillas-Hernández, and Carmelo Rosales-Guzmán. Highly-stable generation of vector beams through a common-path interferometer and a dmd. Journal of Optics, 24(7):074007, 2022. 1
- [18]Nkosi Bhebhe, Carmelo Rosales-Guzman, and Andrew Forbes. Classical and quantum analysis of propagation invariant vector flat-top beams. Applied optics, 57(19):5451–5458, 2018. 1, 3DOI
- [19]Wei Han, Wen Cheng, and Qiwen Zhan. Flattop focusing with full poincaré beams under low numerical aperture illumination. Optics letters, 36(9):1605–1607, 2011. 1DOI
- [20]Ané Kritzinger, Andrew Forbes, and Patricia BC Forbes. Optical trapping and fluorescence control with vectorial structured light. Scientific Reports, 12(1):17690, 2022. 1, 5DOI
- [21]Tonglu Wang, Shiyao Fu, Shikun Zhang, Chunqing Gao, and Feng He. A sagnac-like interferometer for the generation of vector beams. Applied Physics B, 122(9):231, 2016. 2DOI
- [22]Keshaan Singh, Najmeh Tabebordbar, Andrew Forbes, and Angela Dudley. Digital stokes polarimetry and its application to structured light: tutorial. Journal of the Optical Society of America A, 37(11):C33–C44, 2020. 3DOI
- [23]Houan Teng, Jinshan Zhong, Xinrui Lei, and Qiwen Zhan. Optical skyrmion interaction mediated polarization topology. Chinese Optics Letters, 23(10):100015, 2025. 4DOI
- [24]Sven Thomas, John Powell, Oliver Bocksrocker, Nicolai Speker, Tim Hesse, Christian Hagenlocher, and Thomas Graf. Laser cutting: a comparison of the performance of gaussian, donut and top-hat beams, and an explanation of factors affecting cut quality and striation generation as a function of cutting speed. The International Journal of Advanced Manufacturing Technology, pages 1–13, 2026. 5DOI
- [25]Ernestas Nacius, Orestas Ulčinas, Sergej Orlov, and Vytautas Jukna. Polarization singularities for shaping of vector flat-top beams in utilization for high-power laser micromachining of various materials. Optics & Laser Technology, 177:111133, 2024.DOI
- [26]Bing Hao, Jordan Burch, and James Leger. Smallest flattop focus by polarization engineering. Applied optics, 47(16):2931–2940, 2008. 5pubmed.ncbi.nlm.nih.gov/18516109
- [27]Muhammad Alsaadawy, Montasser Dewidar, Ahmed Said, Ibrahim Maher, and Taher A Shehabeldeen. A comprehensive review of studying the influence of laser cutting parameters on surface and kerf quality of metals. The International Journal of Advanced Manufacturing Technology, 130(3):1039–1074, 2024. 5DOI
- [28]Keir C Neuman and Steven M Block. Optical trapping. Review of scientific instruments, 75(9):2787–2809, 2004. 5
- [29]Yuanjie Yang, Yu-Xuan Ren, Mingzhou Chen, Yoshihiko Arita, and Carmelo Rosales-Guzmán. Optical trapping with structured light: a review. Advanced Photonics, 3(3):034001–034001, 2021. 5