betaFeedback

WorksPhysics and Astronomy

Doping Topological Dirac Semimetal with magnetic impurities: electronic structure of Mn-doped Cd3_3As2_2

Abstract

The prospect of transforming a Dirac topological semimetal (TSM) into a Weyl TSM phase, following doping by magnetic impurities, is central to TSM applications. The magnetic field from polarized dd levels of magnetic impurities produces a field with a sharp local structure. To what extent magnetic impurities act in the same manner as an applied field and what are the effects of such a field on the electronic structure of a Dirac TSM is the subject of this paper. We present electronic structure calculations of bulk Cd3_3As2_2 with substitutional doping of Mn impurities in the dilute alloy range. Quasi-particle GWGW (QSGWGW) ab-initio electronic structure calculations are used in conjunction with k⋅pk \cdot p model Hamiltonian calculations. As expected, we observe the splitting of the Dirac points into pairs of Weyl points following the doping with Mn. We also show that the electronic structure of Mn-doped Cd3_3As2_2 can be emulated by the electronic structure of pristine Cd3_3As2_2 with an appropriate external magnetic field. Some properties of the conductivity of bulk Cd3_3As2_2 for different magnetic field orientations are also investigated. Our results inform future opportunities for unique device functionality based on band structure tuning not found in conventional magnetic Weyl TSM.

Introduction

Three dimensional topological semimetals (TSMs) encompass a broad class of materials that are generally characterized by the presence of linear band touching nodes near their Fermi levels[1]. These nodes are stabilized by the presence of specific symmetries. The exact details of their electronic structures, however, differ based on the combination of symmetries that are present, leading to several TSM sub-classes[1, 2]. While the sub-classes typically exhibit many similar properties (i.e., high carrier mobility or broadband absorption), differences can also support diverse phenomena that may be exploited for various applications[1, 3, 4, 5, 6].

An important question to ask is whether a TSM can be transformed from one sub-class to another by manipulating a specific symmetry. Such a capability can be advantageous for applications where it is desirable to add one or more properties. A prime example is the formation of a Weyl TSM from a Dirac TSM. Dirac TSMs exhibit both time reversal symmetry (TRS) and spatial inversion symmetry (IS) that help to support the presence of fourfold degenerate bands at the Dirac node(s) located along some high symmetry line(s) in reciprocal kk-space. When either TRS or IS is broken, the Dirac nodes are instead represented as constituent Weyl nodes (with twofold band degeneracy and opposite chirality). Weyl TSMs exhibit several properties that are not present in Dirac TSMs, including robust Fermi arc surface states, the chiral anomaly, the anomalous Hall effect and the bulk photovoltaic effect[1].

An example of such a Dirac to Weyl TSM transformation was demonstrated in Bi-Sb compounds by Au ion implantation leading to IS breaking[7]. Attempts to transform the Dirac TSM Cd3_3As2_2 into a Weyl TSM EuCd2_2As2_2, with the substitution of a magnetic element for Cd, have been made[8, 9]. However recent studies have shown that EuCd2_2As2_2 is a magnetic, small gap, semiconductor rather than a Weyl TSM[10, 11, 12].

It is therefore interesting to know if and how a Dirac TSM can be transformed into a Weyl TSM through the addition of magnetic impurities. In the dilute alloy limit, such impurities have the potential to introduce a large local magnetic field and break TRS without significantly altering other aspects of the material structure. In this work, we explore and clarify the full extent to which substitutional doping with magnetic impurities transforms Dirac nodes into Weyl nodes and the relationships between the orientation of the magnetic moment, the electronic structure, and other properties, such as conductivity. We use Mn impurities in bulk Cd3_3As2_2 as a prototypical three dimensional Dirac system[13]. Cd3_3As2_2 contains two Dirac points on the Γ\GammaZ line in the Brillouin zone, protected by the C4C_4 symmetry about zz. For an ideal, undoped lattice, the Fermi energy EFE_F passes through the Dirac points.

As Mn and Cd both have two valence electrons, Mn substituting for Cd does not electrically dope Cd3_3As2_2. However, Mn has a filled shell of 3dd states in the majority channel, with the minority channel empty. Thus each Mn has a local magnetization of 5μB5\mu_B, similar to MnTe. The majority and minority levels are split by a few eV roughly evenly about the Fermi energy according to the QSGW approximation described below. Thus both states are well removed from EFE_F and have little effect on states around EFE_F, except for the large effective magnetic field from the magnetization on the Mn dd levels. The Mn local moment polarizes the Mn and As pp levels, and we may therefore expect it to behave similarly to an external magnetic field, breaking the TRS. To what extent Mn acts in the same manner as an applied field is a primary subject of this paper.

As we show below, the effective field generated by local moment can be very large compared to external fields accessible in the laboratory. However the net contribution from Mn will depend on the doping, and to what extent the Mn spins are ordered. For the low doping regime we consider here the spins should be completely disordered; however, the spin susceptibility will be greatly enhanced by the partial alignment of the spins on application of a field. For the electronic structure we consider an idealized case: substituting a single Mn on a Cd site in the unit cell of Cd3_3As2_2 (i.e. doping ∼2%\sim2\%), aligned ferromagnetically.

We use ab-initio electronic structure calculations combined with model Hamiltonian calculations to understand the transformation of Dirac points into Weyl points in bulk Cd3_3As2_2. We show that the electronic structure of Mn-doped Cd3_3As2_2 can be well reproduced from the electronic structure of pristine Cd3_3As2_2 with an appropriate external magnetic field. We also briefly study some properties of the conductivity of bulk Cd3_3As2_2 for different orientations of an applied magnetic field.

The paper is organised as follows: In Section II we present and discussion the results of our calculations for the electronic structure and the conductivity. Conclusions are presented in Section III. Additional information are provided in the appendices, about: technicality for the ab-initio calculations in Appendix A, the model Hamiltonian in Appendix B and linear response conductivity in Appendix C.

Calculations and discussion

In this section, we show how the electronic structure of pristine Cd3_3As2_2 is modified by the inclusion of Mn magnetic impurities, i.e. the splitting of the Dirac points into pairs of Weyl points. We also study how an applied magnetic field can have similar effects on the band structures. The calculations are performed by using both an ab-initio electronic structure method and model Hamiltonians.

Ab-initio electronic structure

First principles electronic structure calculations have been performed using the Questaal package[15]. Questaal is an all-electron method, with an augmented wave basis consisting of partial waves inside augmentation spheres based on the linear muffin-tin orbital technique[16]. Calculations have been done at different levels of density functional theory (DFT), i.e. LDA and GGA. Going beyond DFT, we have also performed Quasiparticle Self-consistent GWGW (QSGW) calculations[17]. QSGW provides an effective way to implement the GWGW approximation without relying on a lower level theory as a starting point[18, 19].

We consider a primitive unit cell, for bulk Cd3_3As2_2, consisting of 80 atoms (48 atoms of Cd and 32 of As) as shown in panel (a) of Figure 1. See Appendix A for information about the unit cell and kk-space mesh.

Figure 1. Panel (a): Ball-and-stick representation of the supercell for Cd3_3As2_2. Cd atoms are shown in grey, As atoms in yellow. The red atom is Cd for the pristine structure, and is Mn for the 2 % doped crystal. Panel (b): QSGW electronic band structure of Cd3_3As2_2 for high symmetry kk-space path ZΓX\mathrm{Z}\Gamma\mathrm{X}. Energies, in eV, are measured from the Fermi level EF=0E_F = 0 reference energy where the Dirac point lies. The two Dirac points for the entire pristine Cd3_3As2_2 are located in kk-space at (0,0,±kD)(0, 0, \pm k_D) with kD∼0.03k_D \sim0.03 Å−1^{-1}. Color weighting: red for Cd 5s5s orbital and blue for As 4p4p. Panel (c): Zoom in energy around the Dirac point. Panel (d): QSGW band structure of Mn-doped Cd3_3As2_2 around the Dirac point observed in the undoped case. Bands are split by a Zeeman-like effect due to the magnetic Mn impurity and the Dirac point seems to have disappeared.

Before exploring the effects of Mn doping, we verify the known Cd3_3As2_2 band structure using both DFT and QSGW. Our DFT calculations (not shown) agree with previously reported band-structures[20, 21, 22, 23, 24, 25, 26]. Figure 1 shows our QSGW calculated band structures. Panels (b) and (c) in Figure 1 show the QSGW bands for undoped Cd3_3As2_2. Two Dirac points (i.e. crossing of 4 degenerate bands of mostly 4p4p As character) are found at EFE_F along the ZΓ\mathrm{Z}\Gamma line, they are located at k=(0,0,±kD)k = (0, 0, \pm k_D) with kD∼0.029k_D \sim0.029 Å−1^{-1}, a slightly smaller value than those based on DFT calculations[20, 21, 22, 24].

The band velocity around the Γ\Gamma-point and around the Dirac points are given in Table I for pristine Cd3_3As2_2. The QSGW calculations provide, for at least one branch of the Dirac crossing bands, a velocity of ∼9−10×105\sim9 - 10 \times10^5 [m/s], in agreement with values found in the literature[3, 27, 28]. By contrast, the band velocity is severely underestimated in DFT. This is to be expected because of the local potential DFT treats. DFT underestimates bandgaps in semiconductors[29] and the Fermi velocity at the Dirac point in graphene[30]. A local LDA potential in the auxiliary DFT Hamiltonian results in underestimates of the bandgap, as clearly shown for a few semiconductors in Ref[31].

Shortcomings in the LDA and GGA are also reflected in the location of the Cd 5s5s states: in QSGW they are higher in energy than in DFT. When these states are too low, they may repel the As 4p4p states and contribute to the underestimate of the Fermi velocity. Also admix too much of Cd ss into the states in the vicinity of the Dirac point. Furthermore, the band inversion mechanism leading to the crossing at kz=kDk_z = k_D along the (0,0,±kz)(0, 0, \pm k_z) lines involves a parabolic and an inverted parabolic bands with mostly As 4p4p character. The effective mass of electron-like band is smaller than the effective mass of hole-like band, therefore around the Dirac point, one branch (annotated ZΓ down in Table I) of the crossing bands is associated with a larger velocity than the other branch (annotated ZΓ up in Table I).

We now turn to the case of Cd3_3As2_2 doped by magnetic impurities. We consider that, for the Mn-doped system, one Cd atom in the unit cell is replaced by Mn, i.e. corresponding to a doping of 1/48 ∼\sim 2 %. The band structure of the Mn-doped Cd3_3As2_2 is substantially different from the undoped system, see panel (d) in Figure 1. Bands are split by a Zeeman-like effect owing to the polarization of the As 4pp states induced by the magnetic Mn impurity.

The Dirac point disappears from the symmetry protected ZΓ\Gamma kk-space line. Gapped bands occur around E−EF=25E-E_F=25 meV close to the Γ\Gamma point on the ZΓ\Gamma kk-path.

The majority(minority) Mn dd states consists of occupied (empty) states, centered at EF−4.5E_F-4.5 eV (EF+3.5E_F+3.5 eV) respectively. They make the system ferromagnetic with a net moment of 5.0 μB\mu_B. The Mn local moment in the Mn augmentation sphere is found to be 4.4 μB\mu_B, the remaining 0.6 μB\mu_B decaying away from the Mn. According to the Stoner picture, we should expect the d↑−d↓d^\uparrow-d^\downarrow energy splitting to be I⋅MI\cdot M, where II is the Stoner parameter and MM the local moment. As a rule of thumb, I=1I=1 eV for 3dd transition metals and would lead to d↑−d↓=8.8d^\uparrow-d^\downarrow=8.8 eV. Thus the Stoner splitting is qualitatively correct, though it overestimates slightly the actual splitting. Both d↑d^\uparrow and d↓d^\downarrow are very localized, each with a bandwidth of ∼2\sim2 eV. The dispersion establishes that the Mn dd band hybridizes to some extent with the Cd and As (the Mn-Mn separation is 12.6 Å, too large for direct coupling) and induces a small local moment on those sites. Two of the four As nearest neighbors to Mn acquire a moment of about 0.025 μB\mu_B. For comparison, the Mn local moment in LDA is calculated to be 3.9 μB\mu_B and the d↑d^\uparrow and d↓d^\downarrow band centers fall at approximately EF−3.0E_F-3.0 eV and (EF+1.0E_F+1.0 eV), respectively. The splitting is small enough that states near EFE_F have non-negligible Mn dd character. This shows only that the LDA does not provide an adequate description of the magnetic electronic structure.

As previously mentioned, the magnetic field coming from polarized Mn dd levels has a sharp local (in space) structure, somewhat different from what is expected from a macroscopic applied field. However, it is interesting to see to which extent this field acts in a similar manner as an applied external field.

In order to get more insight into the band structure of Mn-doped Cd3_3As2_2, we consider next how the band structure of pristine Cd3_3As2_2 is modified by the presence of an applied external magnetic field (the latter emulating the presence of the Mn magnetic impurity).

Figure 2 shows the QSGW band structure of pristine Cd3_3As2_2 obtained in the presence of an external applied magnetic field BextB_{\mathrm{ext}} oriented in the zz-direction. Upon application of the magnetic fields, bands are split due to the Zeeman effect, as expected. A large external field, as large as 6 mRy (72.2 meV or 1249.1 Tesla), generated a Zeeman band splitting similar to what is obtained for the Mn-doped Cd3_3As2_2 system. For that field value, the band structure of pristine Cd3_3As2_2 bears some strong resemblance with the bands of the Mn-doped crystal; although missing the apparent gapped band around E−EF=25E-E_F=25 meV seen in the Mn-doped case (comparing Figure 1(d) and Figure 2(c)).

Figure 2. QSGW electronic band structure of pristine Cd3_3As2_2 in the presence of an external applied magnetic field BextB_{\mathrm{ext}}, oriented in the zz-direction. Energies, in eV, are measured from the Fermi level EF=0E_F=0 reference energy. (a) Bext=1B_{\mathrm{ext}}=1 mRy (13.6 meV or 235.1 Tesla), (b) Bext=3B_{\mathrm{ext}}=3 mRy (40.8 meV or 705.8 Tesla), (c) Bext=6B_{\mathrm{ext}}=6 mRy (72.2 meV or 1249.1 Tesla) which bears strong resemblance with the bands of Mn-doped Cd3_3As2_2.

Energy rangekk - pathQSGWLDAGGA
200 to 600 meVZΓ\Gamma9.2 – 10.6∼\sim 4.0
200 to 600 meVΓ\GammaX7.5 – 9.1∼\sim 2.0
10 to 25 meVZΓ\Gamma down∼\sim 9.0∼\sim 5.9
10 to 25 meVZΓ\Gamma up∼\sim 1.5∼\sim 1.5
Dirac point kDk_D[Å−1^{-1}]0.0290.042

Table 1. Band velocities (in units of 10510^5 [m/s]) from QSGW and DFT band structure calculations of pristine Cd3_3As2_2, for different kk-paths and different energy ranges. And value of the Dirac point position (0, 0, kDk_D) along Γ\GammaZ.

Model Hamiltonian: electronic structure and external magnetic field effects

From ab-initio calculations, we have seen that an applied field to the undoped Cd3_3As2_2 can generate similar bands to the Mn-doped Cd3_3As2_2 system. The next question to solve is what happens to the Dirac points in the presence of Mn-doping and/or of the applied magnetic field?

To answer this question, we turn to a simpler model to describe the band structure of Cd3_3As2_2. Using such a model allows us to explore the kk-space bands more easily and to consider any arbitrary magnitude and orientation of the magnetic field. We consider a k⋅pk\cdot p model consisting of four orbitals (s,px,y,zs,p_{x,y,z}) and two spins for each orbital, and including a spin-orbit coupling term HSOH_{\mathrm{SO}} as described in Ref.[20]. Furthermore, we add a Zeeman-like term HB=−γBσH_B=-\gamma\mathbf{B}\boldsymbol{\sigma} where the magnetic field B=(Bx,By,Bz)\mathbf{B}=(B_x,B_y,B_z) couples to the spin Pauli matrices σ=(σx,σy,σz)\boldsymbol{\sigma}=(\sigma_x,\sigma_y,\sigma_z). The Hamiltonian H8(k)H_8(\mathbf{k}) (of size 8 ×\times 8) is a function of three components kx,ky,kzk_x,k_y,k_z of the crystal momentum k\mathbf{k}, and is fully described in Appendix § 2.0.2. After diagonalization for each k\mathbf{k}, the eigenvalues are used to build the corresponding band structure and additional physical quantities as detailed below. Such a model provides us with a quicker way to analyze how the Dirac points are displaced and/or split in k\mathbf{k}-space due to the application of the magnetic field.

Figure 3 shows the band structure obtained from the k⋅p\mathbf{k}\cdot\mathbf{p} H8H_{8} Hamiltonian. In the absence of a magnetic field, the model provides a fairly good representation of the QSGW bands as can be seen by comparing Figure 3(a) with the QSGW bands Figure 1(c). With the k⋅p\mathbf{k}\cdot\mathbf{p} model, we obtain a Dirac point at kD=0.032k_{D}=0.032 Å−1^{-1}, very close to the QSGW calculations.

Band structure from Hamiltonian H₈(k)

Figure 3. Band structure from Hamiltonian H8(k)H_{8}(\mathbf{k}). (a) No applied field. Bands are colored according the eigenvalues sorted in ascending order. The kk-path klinek_{\mathrm{line}} (in Å−1^{-1}) goes from Z (left) to Γ (vertical black line), to X (right) as in Figure 1. The Dirac point is along the ΓZ line, located at kD∼0.032k_{D} \sim0.032 Å−1^{-1} away from Γ. (b) Zoom around the Dirac point along kzk_{z} (in Å−1^{-1}) with kz=kD−0.01+δkzk_{z}=k_{D}-0.01+\delta k_{z}. (c) Splitting of the Dirac point with an applied field γBz=4\gamma B_{z}=4 meV in the zz-direction. The original Dirac point is split into a pair of Weyl points displaced away from (0,0,kD)(0,0,k_{D}) and slightly shifted in energy around EFE_{F}. (d) Two-dimensional constant-energy band structure in the kz−kxk_{z}-k_{x} plane around the Dirac point (green dot), for a constant energy E−EF=5E-E_{F}=5 meV. The band coloring corresponds to the value of the spin component SzS_{z}, i.e. blue Sz=−1S_{z}=-1, red Sz=+1S_{z}=+1, white Sz=0S_{z}=0. The black arrows are the spin vectors (Sy,Sx)(S_{y},S_{x}) in the kz−kxk_{z}-k_{x} plane.

Upon application of a magnetic field in the zz-direction, the Dirac point is split into individual Weyl points[32] displaced away from (0,0,kD)(0,0,k_{D}) and shifted symmetrically up and down in energy around EFE_{F} as shown in Figure 3(c). There are actually four band crossings, two above EFE_{F} and two below. Two corresponding to a pair of “conventional” Weyl points (Chern number ±1\pm1) labelled W±W^{\pm} in Figure 9, and two labelled C±C^{\pm}. Ref. 32 concluded that the C±C^{\pm} crossing points are ”Weyl” points with Chern number 2. Our calculations align with Ref. 32 regarding the W±W^{\pm} points, but we do not find pronounced Berry curvature around the C±C^{\pm} points. This is discussed further in Appendix § 2.0.4.

Figure 9. Panel (a): Band structure with the Weyl points, W+W^{+} and W−W^{-} (black dots) and crossings C+C^{+} and C−C^{-} (green diamonds) for an applied field is γBz=10\gamma B_{z}=10 meV. The red dot represents the original Dirac point. Panel (b,c): 3D maps, on regular kk-space grid, of the Berry curvature vectors (Ωˉx,Ωˉy,Ωˉz)(\bar{\Omega}_{x},\bar{\Omega}_{y},\bar{\Omega}_{z}) (small blue arrows). The line of symbols, at kx=ky=0k_{x}=k_{y}=0, represent the sequence of C+C^{+}, W+W^{+}, DD, W−W^{-}, C−C^{-} points along kzk_{z}, with the Dirac point DD (red dot) at kz=kD=0.032k_{z}=k_{D}=0.032 Å−1^{-1}. A larger contribution of Berry curvature is found around the Weyl points W±W^{\pm} (black dots) than around the C±C^{\pm} crossing points (green diamonds). Energy window integration for Ωˉy\bar{\Omega}_{y} is around the pair of points W−W^{-}, C−C^{-} (located above the DD point, kz>kDk_{z}>k_{D}) in panel (b); around the pair C+C^{+}, W+W^{+} (located below the DD point, kz<kDk_{z}<k_{D}) in panel (c).

The identification of the Weyl bands and crossings can be made clearly by considering the bands spin texture. The spin components SiS_{i} (i=x,y,zi=x,y,z) are calculated from the expectation value of the spin Pauli matrices Si=⟨σi⟩S_{i}=\langle\sigma_{i}\rangle using the eigenstates of H8(k)H_{8}(\mathbf{k}) at each k\mathbf{k} point. In Appendix § 2.0.4, we provide a full analysis of the spin texture of the different bands and for different constant energies ranging from E−EF=5E-E_{F}=5 meV to E−EF=−5E-E_{F}=-5 meV. Our analysis clearly identify the position of the Weyl points with opposite chirality. Figure 3(d) shows the two-dimensional constant-energy band structure, in the kz−kxk_{z}-k_{x} plane for a constant energy E−EF=5E-E_{F}=5 meV. The blue ellipse corresponds to a slice in the Weyl “cone” at E−EF>0E-E_{F}>0, located around the original Dirac point (green dot in Figure 3(d)). As discussed in the previous section, the bands around the Dirac points are anisotropic, i.e. they disperse with different velocities for different k\mathbf{k} orientation. Hence a constant energy slice in the Weyl “cone” has the shape of an ellipse, instead of a circle (were the velocity of the Weyl cone to be isotropic).

For E−EF=5E-E_{F}=5 meV, the constant energy ellipse has the spin component SzS_{z} oriented in one direction (opposite to the applied magnetic field) and anisotropic spin vectors (Sy,Sx)(S_{y},S_{x}) oriented outwards the ellipse in the kz−kxk_{z}-k_{x} plane. The outer (red) band (kz>0.034k_{z}>0.034 Å−1^{-1}) shows a spin component SzS_{z} with the opposite direction and a different kind of spin texture. As detailed in Appendix § 2.0.4, the outer band corresponds to the second Weyl “cone” located below EFE_{F} around the original Dirac point.

Realistic band structure for real materials contains richer information in contrast to simpler band models considering only linear kk-dispersion for the Weyl cones. The former may lead to transport properties which differ from those calculated from simpler bands (considering the change of velocity, spin texture with respect to change of Fermi energy or temperature).

So far we have considered the case of a magnetic field applied in the zz-direction. It is crucial to know how the Dirac points are affected by a changing orientation of the field. Figure 4 compares how the Weyl points evolve from the Dirac points for fields along the xx- and zz-direction. For B∥z^\mathbf{B}\parallel\hat{z}, bands drawn along the (0,0,kz)(0,0,k_{z}) line, show that the Weyl points split in both k\mathbf{k} and energy, as shown in Figure 3. The separation between Weyl points is parallel to B\mathbf{B}. When B∥x^\mathbf{B}\parallel\hat{x}, a gap appears on this same line; however, the Dirac point splits into two Weyl points at (±δkx,0,±kD)(\pm\delta k_{x},0,\pm k_{D}). Figure 4(c) depicts bands for the same excursion in kzk_{z} but offset by a fixed δkx\delta k_{x}. In general the connecting vector between Weyl points is parallel to B\mathbf{B}. However, the perturbation under a BxB_{x} field causes no energy splitting of the Weyl points, unlike the B∥z^\mathbf{B}\parallel\hat{z} case.

Band structure from Hamiltonian $H_8(\mathbf{k})$

Figure 4. Band structure from Hamiltonian H8(k)H_8(\mathbf{k}). The kk-path klinek_{\mathrm{line}} is along the [1] direction and goes from (0,0,−0.08)(0,0,-0.08) to (0,0,+0.08)(0,0,+0.08) Å−1^{-1}. (a) No applied field. (b) Applied field in the zz-direction γBz=2.8\gamma B_z=2.8 meV. (c) Applied field in the xx-direction γBx=2.8\gamma B_x=2.8 meV, Bz=By=0B_z=B_y=0. There is an apparent gap along the kk-path at the Dirac points. (d) Applied BxB_x field and shifted kk-path going from (+δkx,0,−0.08)(+\delta k_x,0,-0.08) to (+δkx,0,+0.08)(+\delta k_x,0,+0.08) Å−1^{-1}. The original Dirac points at (0,0,±kD)(0,0,\pm k_D) split into two pair of Weyl points (crossing of 2 bands) at (±δkx,0,±kD)(\pm\delta k_x,0,\pm k_D) with δkx=0.0015\delta k_x=0.0015 Å−1^{-1}.

Figure 5 shows constant-energy band in the two-dimensional kz−kxk_{z}-k_{x} plane around the pair of Weyl points located at (±δkx,0,−kD)(\pm\delta k_{x},0,-k_{D}), moved along the xx-direction of the field, in k\mathbf{k}-space. The spin texture is also represented for the three spin components Sx,y,zS_{x,y,z}. The opposite chirality between the two Weyl points is clearly seen, as well as the change of sign of the spin texture for energy above and below the Weyl crossing points.

Two-dimensional constant-energy band structure

Figure 5. Two-dimensional constant-energy band structure from the H8(k)H_8(\mathbf{k}) Hamiltonian in the kz−kxk_z-k_x plane around a pair of Weyl points located at (±δkx,0,−kD)(\pm\delta k_x,0,-k_D). The applied field is γBx=2.8\gamma B_x=2.8 meV, Bz=By=0B_z=B_y=0. The coloring code correspond to the spin component SzS_z, i.e. blue Sz=−1S_z=-1, red Sz=+1S_z=+1, white Sz=0S_z=0. The small arrows represents the spin vector (Sy,Sx)(S_y,S_x) in the kz−kxk_z-k_x plane. The position of the green dot is (0,0,−kD)(0,0,-k_D). (a) Constant energy E=+0.9E=+0.9 meV. (b) Constant energy E=−0.6E=-0.6 meV. The opposite spin texture (chirality) between the two Weyl points is clear. Also note the change of sign of the spin texture (Sy,Sx)(S_y,S_x) for energy above and below the Weyl crossing points.

Reconciling the doped and undoped Cd₃As₂ cases

Our electronic structure calculations with the model Hamiltonian have shown that the application of an external magnetic field splits the Dirac point into a pair at Weyl points of opposite chirality. They are displaced symmetrically around kDk_D, possibly with a small energy shift.

Such a behaviour should also, in principle, hold for the band structure of realistic cases of doped and undoped Cd₃As₂. In Mn-doped Cd₃As₂, the gap around E−EF=25E-E_F=25 meV close to Γ\Gamma is only apparent: the bands do still cross but at a displaced kxk_x point. Indeed, by plotting the QSGW band structure of Mn-doped Cd₃As₂ along the ZΓXZ\Gamma X kk-path slightly shifted in the kxk_x direction, one recovers a closed gap as shown in Figure 6. This is where one of the Weyl point has been moved by the field generated by the magnetic impurity.

Figure 6. Panel (a): QSGW electronic band structure of Cd₃As₂ for high symmetry kk-space path ZΓXZ\Gamma X. Same as panel (d) in Figure 1. Panel (b): Bands along the ZΓXZ\Gamma X kk-space path slightly shifted in the kxk_x direction by δkx=−0.0027\delta k_x=-0.0027 Å−1^{-1} for which the gap is closed. Energies, in eV, are measured from the Fermi level EF=0E_F=0. The bands in panel (b) look extremely similar to the bands in panel (c) in Figure 2.

This implies that the local magnetic field due to the Mn impurity is slightly canted away from the zz-direction. This small deviation of the field towards the xx-direction is most probably related to spin-orbit coupling in the QSGW Hamiltonian of Mn-doped Cd₃As₂ generating a slight canting away from the zz-axis.

Thus, the magnetic impurity does not open a gap in the band structure and one can reasonably well emulate the “exact” band structure of Mn-doped Cd₃As₂ from the band structure of pristine Cd₃As₂ by applying an appropriate external magnetic field. This is clearly seen by comparing Figure 6(b) with Figure 2(c).

These results also lead us to believe that one can use the k⋅pk\cdot p model Hamiltonian, complemented with the Zeeman term for an applied field, to calculate physical properties measured on Mn-doped Cd₃As₂ sample.

Conductivity and orientation of the magnetic field

The transport properties of TSMs are intimately related to their band structures. We have seen how the band structure of Cd₃As₂ is modified by magnetic impurity doping and/or by an applied magnetic field. We now turn to studying some effects of a magnetic field on the conductivity of bulk Cd₃As₂.

In Weyl TSM, an anomalous Hall DC conductivity is observed with a value lying between zero (conductivity of insulators) and one quantum of conductance for topological insulator[1, 33, 34]. The DC Hall conductivity, governed by Berry phase, is proportional to the separation in kk-space of two Weyl points which itself may depend on the applied magnetic field.

Magnetotransport of bulk TSM involve additional features not included here (especially the role Landau levels play) and will be discussed elsewhere. In the following we focus on how an applied field affects the symmetry of the dynamical conductivity tensor.

From the eigenstates of H8(k)H_8(\mathbf{k}) and from the velocity matrices ∇kαH8(k)\nabla_{\mathbf{k}_\alpha}H_8(\mathbf{k}), we can calculate the conductivity tensor σαβ(ω)\sigma_{\alpha\beta}(\omega) (α,β=x,y,z\alpha,\beta= x,y,z) within linear response theory [35, 36, 37, 38, 39, 40]. Detail of the calculations are provided in Appendix C. In the DC regime, the definition of σαβ\sigma_{\alpha\beta} from the Berry curvature [40] implies that conductivity tensor is anti-symmetric, i.e. σαβ=−σβα\sigma_{\alpha\beta}=-\sigma_{\beta\alpha} for α≠β\alpha\ne\beta. This is due to the property of the cross product of the current operator matrix elements entering the definition of the Berry curvature [40].

In the AC regime (ω≠0\omega\ne0), the anti-symmetry of the conductivity tensor is not obvious, as shown in Appendix C. The symmetry of the conductivity tensor will depend on the intrinsic symmetry of the eigenstates, and therefore on the orientation of the magnetic field. In the following, we show the symmetry of the off-diagonal components σαβ(ω)\sigma_{\alpha\beta}(\omega) (α≠β\alpha\ne\beta) for arbitrary orientation of the external magnetic field.

As a first step, we have checked that our calculations satisfy the Onsager relationships, as expected, i.e. σxy(ω;Bz)=σyx(ω;−Bz)\sigma_{xy}(\omega;B_z)=\sigma_{yx}(\omega;-B_z) (and likewise for the xz,zxxz,zx components with an applied ByB_y field, and for the yz,zyyz,zy components with an applied BxB_x). Different symmetry relationships may hold for arbitrary orientations of the applied field.

The results of our calculations with different field orientations are summarised in Figure 7. For an applied field along the high symmetry Cartesian directions x,y,zx,y,z, only the (Hall) conductivity in the plane perpendicular to the field is non-zero, as should be expected. For example, with B=(0,0,Bz)\mathbf{B}=(0,0,B_z), only the components σxy,yx\sigma_{xy,yx} are non-zero; and similarly for the components xz,zxxz,zx (yz,zyyz,zy) components with an applied ByB_y (BxB_x). Diagonal response components are anti-symmetric, i.e. σαβ(ω)=−σβα(ω)\sigma_{\alpha\beta}(\omega)=-\sigma_{\beta\alpha}(\omega). similarly to the DC case.

Symmetry of the off-diagonal components of the AC conductivity tensor

Figure 7. Symmetry of the off-diagonal components of the AC conductivity tensor σαβ(ω)\sigma_{\alpha\beta}(\omega). For a given field orientation, the symmetry relationships hold for all energy ω≠0\omega\ne0. The different arrows represent the direction [hkℓ][hk\ell] of the applied magnetic field in the 3D real space. The pseudovector gives the relationship between the 3 pairs (xy,yx)(xy,yx), (xz,zx)(xz,zx) and (yz,zy)(yz,zy) of the conductivity components.

For other orientations of the field, more than one pair of (αβ,βα)(\alpha\beta,\beta\alpha) components have non-zero conductivity values. This comes essentially from the symmetry of the rotation of the frame-axis and the fact that only the “perpendicular to the field” (non-diagonal) components of the conductivity are non-zero. For field orientation along some symmetry lines [110][110], [101][101], [011][011], we find that there is always at least one pair of αβ\alpha\beta components which provide anti-symmetry. This is a very interesting outcome for the optical properties of TSM [41, 42, 43]. Indeed, the anti-symmetry of the dynamical conductivity tensor is a central key in order to obtain non-reciprocity effects of light [43] and thermal radiation [44] in Weyl TSMs.

Our results imply that the local field, whatever its origin, does not need to be strictly oriented along high symmetry Cartesian axis to realize antisymmetry of the optical conductivity tensor, and therefore in order to obtain non-reciprocal effects in Weyl TSMs. .

Conclusion

We have studied electronic structure of bulk Cd3_3As2_2 by using QSGW electronic structure calculations and a k⋅pk\cdot p model Hamiltonian. We have shown that substitutional doping by Mn impurities, in the small doping regime, induce a topological phase transition, i.e. the original Dirac points in pristine Cd3_3As2_2 split into individual Weyl points. We have demonstrated that the electronic structure of Mn-doped Cd3_3As2_2 can be fairly well reproduced by the electronic structure of pristine Cd3_3As2_2 with an appropriate external magnetic field. This result highlights opportunities for unique device functionality based on band structure tuning which is not found in conventional magnetic Weyl TSM. Using a k⋅pk\cdot p model Hamiltonian, in the presence of an applied magnetic field, we have studied the conductivity of bulk Cd3_3As2_2 for different orientations of the applied field and shown the symmetry properties of the conductivity tensor.

From an experimental standpoint, substitutional doping with Mn must first be demonstrated in Cd3_3As2_2 [13], followed by verification of changes in the bandstructure and properties.

At dilute doping, spins will be disordered; causing the net field to be small. However an applied field may act to align the Mn spins, greatly enhancing the spin susceptibility relative to pristine Cd3_3As2_2. At higher doping the Mn can interact, and affect the spin ordering and modify the effective field. Also we considered substitutional doping only. The interstitial Mn(I) may act differently from the substitutional Mn(s), especially as Mn(I) will dope the system. Also Mn(I)-Mn(s) interactions can be very different from Mn(s)-Mn(s) interaction, which can affect the thermodynamic distribution of dopants and the total spin.

Acknowledgments

This work was authored in part by the National Renewable Energy Laboratory for the U.S. Department of Energy (DOE) under Contract No. DE-AC36-08GO28308. Funding was provided by the U.S. Department of Energy (DOE), Office of Science, Basic Energy Sciences, Physical Behavior of Materials Program as part of the “Disorder in Topological Semimetals” project. The views expressed in the article do not necessarily represent the views of the DOE or the U.S. Government. The U.S. Government retains and the publisher, by accepting the article for publication, acknowledges that the U.S. Government retains a nonexclusive, paid-up, irrevocable, worldwide license to publish or reproduce the published form of this work, or allow others to do so, for U.S. Government purposes. We acknowledge the use of the National Energy Research Scientific Computing Center, under Contract No. DE-AC02-05CH11231 using NERSC award BES-ERCAP0021783 and we also acknowledge that a portion of the research was performed using computational resources sponsored by the Department of Energy’s Office of Energy Efficiency and Renewable Energy and located at the National Renewable Energy Laboratory. HN acknowledges financial support from NREL via a subcontract agreement between KCL and NREL.

Questaal calculations

For electronic structure calculations, we use the Quasiparticle Self-Consistent GWGW approximation[17, 18, 19]. Quasiparticlization of the GWGW self-energy yields a static one-particle band

similar in form to Hartree–Fock or DFT, but its fidelity is high because the potential is constructed so that energy bands physically correspond to excitation energies. This is because the QSGW self-consistency condition causes the poles of the noninteracting Green’s function to coincide with the interacting one. DFT energy bands, by contrast, have no physical meaning even though they are widely interpreted as excitation energies. See Refs. [15, 16] for further details on the Questaal code and implementation of QSGW.

We use a primitive unit cell, consisting of 80 atoms (48 atoms of Cd and 32 of As), with broken inversion symmetry. The lattice cell vectors are (−a,a,b)(-a,a,b); (a,−a,b)(a,-a,b) (a,a,−b)(a,a,-b) for the pristine Cd3_3As2_2 system where a=6.313747a = 6.313747 Å and b=12.766886b = 12.766886 Å. For the Mn-doped case, one Cd atom is exchanged with one atom of Mn, i.e. corresponding to a doping of 1/48 ∼\sim 2 % (an equivalent supercell built from the vectors (2a,0,0);(0,2a,0);(a;a;b)(2a,0,0);(0,2a,0);(a;a;b) is used).

For the DFT calculations, a kk-point grid of (4×4×4)(4 \times4 \times4) was used for the DFT calculations. A smaller grid of (3×3×3)(3 \times3 \times3) was used for QSGW calculations. The self-consistency of the DFT/QSGW calculations is achieved when the RMS change in output-input self-energy and charge density were both converged to about 6×10−66 \times10^{-6}. For QSGW calculations, all the states are used in the present case (5664 states in the total system, with ∼4612\sim4612 of them unoccupied). Questaal’s basis set is tailored to the potential[16], so that quasiparticle levels converge much more rapidly with the number of states than what occurs for a plane wave basis. Band structure calculations, in the presence of the GWGW self-energy, were performed with a denser kk-point grid mesh.

The k⋅pk \cdot p Hamiltonian

The k⋅pk \cdot p model Hamiltonian[20, 45] is build on 4 bands (ss– and pp– orbitals) and 2 spins, including spin-orbit coupling (SOC) and a Zeeman-like term:

H8(k)=H4(k)⊗Iσ+HSO+HZ.(1)H_8(\mathbf{k}) = H_4(\mathbf{k}) \otimes I_\sigma+ H_{\mathrm{SO}} + H_Z . \tag*{(1)}

where IσI_\sigma is the identity in the spin space. For a given spin, the Hamiltonian H4(k)H_4(\mathbf{k}), in the basis of the ss– and pp– orbitals, is given by

H4(k)=[Ak2+EsikxPxikyPyikzPz+dIS−ikxPxLkx2+M(ky2+kz2)+EpxNkxkyNkxkz−ikyPyNkxkyLky2+M(kx2+kz2)+EpyNkykz−ikzPz+dISNkxkzNkykzLkz2+M(kx2+ky2)+Epz](2)H_4(\mathbf{k}) = \begin{bmatrix} Ak^2 + E_s & ik_xP_x & ik_yP_y & ik_zP_z + d_{IS} \\ -ik_xP_x & Lk_x^2 + M(k_y^2 + k_z^2) + E_{px} & Nk_xk_y & Nk_xk_z \\ -ik_yP_y & Nk_xk_y & Lk_y^2 + M(k_x^2 + k_z^2) + E_{py} & Nk_yk_z \\ -ik_zP_z + d_{IS} & Nk_xk_z & Nk_yk_z & Lk_z^2 + M(k_x^2 + k_y^2) + E_{pz} \end{bmatrix} \tag*{(2)}

Cubic symmetry is broken by using: Epx=Epy=EpE_{px} = E_{py} = E_p and Epz=Ep−δE_{pz} = E_p - \delta. The parameter dISd_{IS} is introduced to break the inversion symmetry[20]. The SOC term is

HSO=Δ2L⋅σ=Δ2[LzL−L+−Lz](3)H_{\mathrm{SO}} = \frac{\Delta}{2}\mathbf{L}\cdot\boldsymbol{\sigma} = \frac{\Delta}{2} \begin{bmatrix} L_z & L_- \\ L_+ & -L_z \end{bmatrix} \tag*{(3)}

where σ\sigma is the vector of Pauli matrices σα\sigma_\alpha, LαL_\alpha are (4×4)(4 \times4) matrices in the spsp– orbital basis, and L±=Lx±iLyL_\pm= L_x \pm iL_y with

For the ss– orbital, the angular momentum is zero. Hence we have

Lα=[003×101×3lα](4)L_\alpha= \begin{bmatrix} 0 & 0_{3 \times1} \\ 0_{1 \times3} & l_\alpha \end{bmatrix} \tag*{(4)}

In the basis of the pp-orbitals, the angular momentum is given by

lx=iℏ[00000−1010],ly=iℏ[001000−100],lz=iℏ[0−10100000](5)l_x=i\hbar\begin{bmatrix}0&0&0\\0&0&-1\\0&1&0\end{bmatrix},\quad l_y=i\hbar\begin{bmatrix}0&0&1\\0&0&0\\-1&0&0\end{bmatrix},\quad l_z=i\hbar\begin{bmatrix}0&-1&0\\1&0&0\\0&0&0\end{bmatrix} \tag*{(5)}

The Zeeman term is

HZ=−γB⋅σ=−γ[BzB−B+−Bz](6)H_Z=-\gamma\mathbf{B}\cdot\boldsymbol{\sigma}=-\gamma\begin{bmatrix}B_z&B_-\\B_+&-B_z\end{bmatrix} \tag*{(6)}

with B±=Bx±iByB_{\pm}=B_x\pm iB_y.

In the spsp-orbital basis, we take

Bα=[Bαs0000Bαpx0000Bαpy0000Bαpz](7)B_{\alpha}=\begin{bmatrix}B_{\alpha}^{s}&0&0&0\\0&B_{\alpha}^{p_x}&0&0\\0&0&B_{\alpha}^{p_y}&0\\0&0&0&B_{\alpha}^{p_z}\end{bmatrix} \tag*{(7)}

and apply the BB field “uniformly” on the pp-orbitals only, i.e. Bαpx=Bαpy=Bαpz=BαB_{\alpha}^{p_x}=B_{\alpha}^{p_y}=B_{\alpha}^{p_z}=B_{\alpha} and Bαs=0B_{\alpha}^{s}=0.

Note that calculations with Bαs=BαB_{\alpha}^{s}=B_{\alpha} do not change significantly the electronic structure around the Dirac point; and not affect the results of the symmetry of the conductivity tensor upon the direction of the applied field.

The value of the parameters are taken from Ref. [20] with a small modification of the SO coupling constant (here we take Δ=0.155\Delta=0.155 eV) to make the Dirac points align with the Fermi level EFE_F within a range of 10−510^{-5} eV.

Linear response conductivity

The (dynamical) electrical conductivity is obtained from linear response theory and given by[35, 37, 38]

σαβ(ω)=σαβg(ω)+e2iωSαβ(ω)(8)\sigma_{\alpha\beta}(\omega)=\sigma_{\alpha\beta}^{g}(\omega)+\frac{e^2}{i\omega}S_{\alpha\beta}(\omega) \tag*{(8)}

where σαβg(ω)\sigma_{\alpha\beta}^{g}(\omega) is the so-called gauge term proportional to δαβ\delta_{\alpha\beta}[35, 37, 38] and α,β=x,y,z\alpha,\beta=x,y,z the Cartesian coordinates. The current-current correlation function Sαβ(ω)S_{\alpha\beta}(\omega) is

Sαβ(ω)=−2∫dϵ2πfϵTr⁡[jαIm⁡G(ϵ)jβG+(ϵ+ℏω)+jαG−(ϵ−ℏω)jβIm⁡G(ϵ)](9)S_{\alpha\beta}(\omega)=-2\int\frac{d\epsilon}{2\pi}f_{\epsilon}\operatorname{Tr}\left[j_{\alpha}\operatorname{Im}G(\epsilon)j_{\beta}G_+(\epsilon+\hbar\omega)+j_{\alpha}G_-(\epsilon-\hbar\omega)j_{\beta}\operatorname{Im}G(\epsilon)\right] \tag*{(9)}

where fϵf_{\epsilon} is the Fermi-Dirac distribution function, jα,βj_{\alpha,\beta} the current operators, and G±G_{\pm} are the Green’s functions G±=(ϵ−H8(k)±iη)−1G_{\pm}=(\epsilon-H_8(\mathbf{k})\pm i\eta)^{-1} (with η→0+\eta\to0^+) and Im⁡G(ϵ)=12i(G+−G−)=−πδ(ϵ−H8)\operatorname{Im}G(\epsilon)=\frac{1}{2i}(G_+-G_-)=-\pi\delta(\epsilon-H_8).

Using a compact notation for the eigenstates of H8(k)H_8(\mathbf{k}), En≡En(k)E_n\equiv E_n(\mathbf{k}) and ∣n⟩≡∣un(k)⟩\lvert n\rangle\equiv\lvert u_n(\mathbf{k})\rangle, one recovers the usual expression for the dynamical conductivity σαβ(ω)\sigma_{\alpha\beta}(\omega) (with α≠β\alpha\ne\beta[35, 36, 37, 38, 39, 40])

σαβ(ω)=−ie2ℏ∑n,m≠n(fEm−fEnℏω)⟨n∣jα∣m⟩⟨m∣jβ∣n⟩(Em−En)+ℏω+iη\sigma_{\alpha\beta}(\omega)=-ie^2\hbar\sum_{n,m\ne n}\left(\frac{f_{E_m}-f_{E_n}}{\hbar\omega}\right)\frac{\langle n|j_{\alpha}|m\rangle\langle m|j_{\beta}|n\rangle}{(E_m-E_n)+\hbar\omega+i\eta}
=e2iω∑n,m≠n(fEn−fEm)⟨n∣jα∣m⟩⟨m∣jβ∣n⟩(En−Em)−ℏω−iη(10)\qquad=\frac{e^2}{i\omega}\sum_{n,m\ne n}(f_{E_n}-f_{E_m})\frac{\langle n|j_{\alpha}|m\rangle\langle m|j_{\beta}|n\rangle}{(E_n-E_m)-\hbar\omega-i\eta} \tag*{(10)}

The matrix elements ⟨n∣jα∣m⟩\langle n|j_{\alpha}|m\rangle of the α\alpha-component of the current operator are obtained, in the kk-space, from the matrix elements ⟨un(k)∣∇kH8(k)∣um(k)⟩\langle u_n(\mathbf{k})|\nabla_{\mathbf{k}}H_8(\mathbf{k})|u_m(\mathbf{k})\rangle. Analytical expressions for ∇kαH8(k)\nabla_{k_{\alpha}}H_8(\mathbf{k}) are readily obtained from Eq. (2).

Also, note that by swapping the α,β\alpha,\beta indices, one obtains an expression for σβα(ω)\sigma_{\beta\alpha}(\omega) which is clearly different from Eq. (10):

σβα(ω)=e2iω∑n,m≠n(fEm−fEn)⟨n∣jα∣m⟩⟨m∣jβ∣n⟩(Em−En)−ℏω−iη≠σαβ(ω)(11)\begin{aligned} \sigma_{\beta\alpha}(\omega)=\frac{e^2}{i\omega}\sum_{n,m\ne n}(f_{E_m}-f_{E_n})\frac{\langle n|j_{\alpha}|m\rangle\langle m|j_{\beta}|n\rangle}{(E_m-E_n)-\hbar\omega-i\eta} \\ &\ne\sigma_{\alpha\beta}(\omega) \tag*{(11)} \end{aligned}

and ≠−σαβ(ω)\ne-\sigma_{\alpha\beta}(\omega).

Therefore, unless there is a very specific symmetry in the Hamiltonian, reflected in the spectrum EnE_n and the eigenstates ∣n⟩\lvert n\rangle, one cannot easily conclude if the conductivity tensor is symmetric, or anti-symmetric. Also note that, H8(k)H_8(\mathbf{k}) and ∇kH8(k)\nabla_{\mathbf{k}}H_8(\mathbf{k}) being Hermitian, is not enough to explain the (anti)symmetry.

Finally, when performing actual calculations, the sums implicitly include the kk-dependence of the eigenstates, i.e.

∑n,m≠n⋯⟶∫dk(2π)3∑n=1,m≠n8⋯(12)\sum_{n,m\ne n}\cdots\longrightarrow\int\frac{d\mathbf{k}}{(2\pi)^3}\sum_{n=1,m\ne n}^{8}\cdots \tag*{(12)}

Numerical calculations were performed for a regular cubic kk-point grid, centered on the Γ\Gamma point, ranging from −0.08-0.08 to 0.080.08 Å−1^{-1} in the three Cartesian directions. A mesh of (355×355×355)(355\times355\times355) was used, i.e. more than 44 millions kk-points in order to fully capture the contributions of the Weyl points[40].

Indentification of the Weyl points

In this appendix, we show in detail the spin texture of the bands around the Dirac point at (0,0,kD)(0,0,k_D) in Figure 3. We calculate the spin components Sx,y,zS_{x,y,z} from expectation value of the Pauli matrices Si=⟨σi⟩S_i=\langle\sigma_i\rangle using the eigenstates of H8(k)H_8(\mathbf{k}) at each kk point.

In Figure 8, the 2D maps represent the spin vectors (Sy,Sx)(S_y,S_x) in the kz−kxk_z-k_x plane as black arrows. The color coding of the 2D constant energy contours corresponds to the SzS_z spin component: blue for minority spin Sz=−1S_z=-1, red for majority spin Sz=1S_z=1, and white for Sz∼0S_z\sim0.

Figure 8. Left and Right double-column panels show the band structure (left side in a double-column) along kzk_z path and the 2D maps of constant-energy band structure (right side in a double-column) in the kz−kxk_z - k_x plane around the Dirac point (green dot). The constant energy is shown by the horizonal green solid-line in the kzk_z bands. The applied field is γBz=4\gamma B_z = 4 meV. The band coloring in the 2D maps corresponds to the value of SzS_z, i.e. blue Sz=−1S_z = -1, red Sz=+1S_z = +1, white Sz=0S_z = 0. The black arrows correspond the spin vectors (SyS_y, SxS_x) in the kz−kxk_z - k_x plane.

Due to the field applied in the zz-direction, the Dirac point is split into individual Weyl points[32] located at (0,0,kz=kD∓δkW±)(0,0,k_z=k_D\mp\delta k_W^{\pm}). The constant energy slices in the Weyl “cones” have elliptic shapes because of the anisotropy of the band velocity in kk-space. The Weyl points are shifted in energy from EFE_F by the Zeeman effect, down by −EW+-E_W^{+} for the Weyl point W+W^{+} with majority spin along the zz-direction, and shifted up by +EW−+E_{W}^{-} for the Weyl point W−W^{-} with minority SzS_{z} spin directed in the opposite direction of the applied field (see red and blue ellipses in Figure 8 respectively).

Let us first focus on the Weyl point W−W^{-} above EFE_{\mathrm{F}}. For energies above the Weyl point (i.e. E−EF>+EW−E-E_{\mathrm{F}>+E_{W}^{-}}), the spin vectors (Sy,Sx)(S_{y},S_{x}) are directed outwards the blue ellipses, while for energies below the Weyl point the spin vectors (Sy,Sx)(S_{y},S_{x}) are directed inwards.

The other Weyl point W+W^{+}, located below EFE_{\mathrm{F}}, has the opposite chirality as expected. That is for energies E−EF>−EW+E-E_{\mathrm{F}}>-E_{W}^{+} above the Weyl point, the spin vectors (Sy,Sx)(S_{y},S_{x}) are directed inwards the red ellipses, while for energies below the Weyl point the spin vectors (Sy,Sx)(S_{y},S_{x}) are directed outwards.

Note that the constant energy slices of a given Weyl “cone”, i.e. blue or red ellipses for W∓W^{\mp} (with Chern number ±1\pm1 according to Ref. 32), are accompanied with another band (red or blue respectively) with opposite spin SzS_{z} direction which originates from the other Weyl “cone” W±W^{\pm} (at opposite energy).

The two other crossings, labelled C±C^{\pm} in Figure 9(a), have been identified as other Weyl points associated with higher Chern number in Ref. 32. Our results reflect a different picture for the C±C^{\pm} points, and the difference can be important because of the central role spin texture plays in transport properties of TSM. For example, the (anomalous) Hall conductivity is given in terms of the Berry curvature[32, 40].

From the eigenstates of H8(k)H_{8}(k), we can calculate the (γ=x,y,z)(\gamma=x,y,z) components of the Berry curvature Ωn,γ\Omega_{n,\gamma} for a given eigenstate nn as follows:

Ωn,γ=iℏ2∑m≠n⟨n∣jα∣m⟩⟨m∣jβ∣n⟩−⟨n∣jβ∣m⟩⟨m∣jα∣n⟩(En−Em)2(13)\Omega_{n,\gamma}=i\hbar^{2}\sum_{m\ne n}\frac{\langle n|j_{\alpha}|m\rangle\langle m|j_{\beta}|n\rangle-\langle n|j_{\beta}|m\rangle\langle m|j_{\alpha}|n\rangle}{(E_{n}-E_{m})^{2}} \tag*{(13)}

with γ≠α,β\gamma\ne\alpha,\beta and α≠β\alpha\ne\beta.

Figure 9 shows two 3D maps, in the kk-space, of the Berry curvature vectors (Ωˉx,Ωˉy,Ωˉz)(\bar{\Omega}_{x},\bar{\Omega}_{y},\bar{\Omega}_{z}) as blue arrows. We have intentionally displayed the arrows as short arrows in order to avoid strong overlap of the different vectors at different kk-points which may lead to confusion. The quantities Ωˉγ\bar{\Omega}_{\gamma} come from the summation of Ωn,γ\Omega_{n,\gamma} over an chosen energy window En∈[Emin⁡,Emax⁡]E_{n}\in[E_{\min},E_{\max}]. We have choosen energy windows around the pairs (W,C)±(W,C)^{\pm} to check which of the crossing points provide the more Berry curvature. In Figure 9(b), the summation is performed for the energy window [+3,+12.5][+3,+12.5] meV around the pair of W−W^{-} and C−C^{-} crossing points; in Figure 9(c) for the energy window [−12.5,−3][-12.5,-3] meV around the pair of W+W^{+} and C+C^{+} crossings. The line of symbols, at kx=ky=0k_{x}=k_{y}=0, represent the sequence of C+C^{+}, W+W^{+}, DD, W−W^{-}, C−C^{-} points along kzk_{z}, with the Dirac point DD at (0,0,kD)(0,0,k_{D}). For both integration windows, one can clearly see a large contribution of Berry curvature around the Weyl points W±W^{\pm} (black dots) in comparison to a smaller Berry curvature around the crossing points C±C^{\pm} (green diamonds). This tends to indicate that, amongst the four band crossings (W,C)±(W,C)^{\pm}, the Weyl points W±W^{\pm} will be playing a more important role in the transport properties based on Berry curvatures.

We have not attempted to analyze why Ref. 32 and this work arrive at different conclusions about the C±C^{\pm} points. The discrepancy can probably be traced to a difference in the construction of the k.p hamiltonian.

References

References

  1. [1]N. P. Armitage, E. J. Mele, and A. Vishwanath, Weyl and Dirac semimetals in three-dimensional solids, Rev. Mod. Phys. 90, 015001 (2018).DOI
  2. [2]J. Li, Z. Zhang, C. Wang, H. Huang, B.-L. Gu, and W. Duan, Topological semimetals from the perspective of first-principles calculations, Journal of Applied Physics 128, 191101 (2020).DOI
  3. [3]T. Liang, Q. Gibson, M. N. Ali, M. Liu, R. J. Cava, and N. P. Ong, Ultrahigh mobility and giant magnetoresistance in the Dirac semimetal Cd₃As₂, Nature Materials 14, 280 (2015).DOI
  4. [4]A.-Q. Wang, X.-G. Ye, D.-P. Xu, and Z.-M. Liao, Topological Semimetal Nanostructures: From Properties to Topotronics, ACS Nano 14, 3755 (2020).DOI
  5. [5]Q. L. He, T. L. Hughes, N. P. Armitage, Y. Tokura, and K. L. Wang, Topological spintronics and magnetoelectronics, Nature Materials 21, 15 (2022).DOI
  6. [6]B. A. Bernevig, C. Felser, and H. Beidenkopf, Progress and prospects in magnetic topological materials, Nature 603, 41 (2022).DOI
  7. [7]W. J. Lee, Y. A. Salawu, H.-J. Kim, C. W. Jang, S. Kim, T. Ratcliff, R. G. Elliman, Z. Yue, X. Wang, S.-E. Lee, M.-H. Jung, J.-S. Rhyee, and S.-H. Choi, Possible permanent Dirac- to Weyl-semimetal phase transition by ion implantation, NPG Asia Materials 14, 31 (2022).DOI
  8. [8]L.-L. Wang, N. H. Jo, B. Kuthanazhi, Y. Wu, R. J. McQueeney, A. Kaminski, and P. C. Canfield, Single pair of Weyl fermions in the half-metallic semimetal EuCd₂As₂, Phys. Rev. B 99, 245147 (2019).DOI
  9. [9]J.-Z. Ma, S. M. Nie, C. J. Yi, J. Jandke, T. Shang, M. Y. Yao, M. Naamneh, L. Q. Yan, Y. Sun, A. Chikina, V. N. Strocov, M. Medarde, M. Song, Y.-M. Xiong, G. Xu, W. Wulfhekel, J. Mesot, M. Reticcioli, C. Franchini, C. Mudry, M. M. Y. G. Shi, T. Qian, H. Ding, and M. Shi, Spin fluctuation induced Weyl semimetal state in the paramagnetic phase of EuCd₂As₂, Science Advances 5, 4718 (2019).
  10. [10]D. Santos-Cottin, I. Mohelský, J. Wyzula, F. Le Mar­delé, I. Kapon, S. Nasrallah, N. Barišić, I. Živković, J. R. Soh, F. Guo, K. Rigaux, M. Puppin, J. H. Dil, B. Gudac, Z. Rukelj, M. Novak, A. B. Kuzmenko, C. C. Homes, T. Dietl, M. Orlita, and A. Akrap, EuCd₂As₂: A Magnetic Semiconductor, Phys. Rev. Lett. 131, 186704 (2023).
  11. [11]Y. Shi, Z. Liu, L. A. Burnett, S. Lee, C. Hu, Q. Jiang, J. Cai, X. Xu, M. Li, C.-C. Chen, and J.-H. Chu, Absence of weyl nodes in EuCd₂As₂ revealed by the carrier density dependence of the anomalous Hall effect, Phys. Rev. B 109, 125202 (2024).DOI
  12. [12]S. Nishihaya, A. Nakamura, M. Ohno, M. Kriener, Y. Watanabe, M. Kawasaki, and M. Uchida, Intrinsic insulating transport characteristics in low-carrier density EuCd₂As₂ films, Applied Physics Letters 124, 023103 (2024).
  13. [13]A. D. Rice, I. A. Leahy, H. Ness, M. van Schilfgaarde, and K. Alberi, unknown, (unpublished) (2025).
  14. [15]QuestaaI code website, https://www.questaal.org.
  15. [16]D. Pashov, S. Acharya, W. R. Lambrecht, J. Jackson, K. D. Belashchenko, A. Chantis, F. Jamet, and M. van Schilfgaarde, QuestaaI: A package of electronic structure methods based on the linear muffin-tin orbital technique, Comput. Phys. Commun 249, 107065 (2020).
  16. [17]S. V. Faleev, M. van Schilfgaarde, and T. Kotani, All-electron self-consistent GW approximation: Application to Si, MnO, and NiO, Phys. Rev. Lett. 93, 126406 (2004).pubmed.ncbi.nlm.nih.gov/15447292
  17. [18]M. van Schilfgaarde, T. Kotani, and S. Faleev, Quasiparticle Self-Consistent GW Theory, Phys. Rev. Lett. 96, 226402 (2006).
  18. [19]T. Kotani, M. van Schilfgaarde, and S. V. Faleev, Quasiparticle self-consistent GW method: A basis for the independent-particle approximation, Phys. Rev. B 76, 165106 (2007).DOI
  19. [20]Z. Wang, H. Weng, Q. Wu, X. Dai, and Z. Fang, Three-dimensional Dirac semimetal and quantum transport in Cd₃As₂, Phys. Rev. B 88, 125427 (2013).DOI
  20. [21]M. N. Ali, Q. Gibson, S. Jeon, B. B. Zhou, A. Yazdani, and R. J. Cava, The crystal and electronic structures of Cd₃As₂, the three-dimensional electronic analogue of graphene, Inorganic Chemistry 53, 4062 (2014).DOI
  21. [22]A. Mosca Conte, O. Pulci, and F. Bechstedt, Electronic and optical properties of topological semimetal Cd₃As₂, Scientific Reports 7, 45500 (2017).
  22. [23]I. Crassee, R. Sankar, W.-L. Lee, A. Akrap, and M. Orlita, 3D Dirac semimetal Cd₃As₂: A review of material properties, Phys. Rev. Mater. 2, 120302 (2018).DOI
  23. [24]S. Yue, H. T. Chorsi, M. Goyal, T. Schumann, R. Yang, T. Xu, B. Deng, S. Stemmer, J. A. Schuller, and B. Liao, Soft phonons and ultralow lattice thermal conductivity in the Dirac semimetal Cd₃As₂, Phys. Rev. Res. 1, 033101 (2019).DOI
  24. [25]E. Kulatov, Y. Uspenskii, L. O. Ovchenikov, A. Mekhiya, A. Davydov, A. Ril’, S. Marenkin, and B. Aronzon, Electronic, magnetic and magnetotransport properties of Mn-doped Dirac semimetal Cd₃As₂, Acta Materialia 219, 117249 (2021).DOI
  25. [26]C. Brooks, M. van Schilfgaarde, D. Pashov, J. N. Nelson, K. Alberi, D. S. Dessau, and S. Lany, Band energy dependence of defect formation in the topological semimetal Cd₃As₂, Phys. Rev. B 107, 224110 (2023).DOI
  26. [27]S. Jeon, B. B. Zhou, A. Gyenis, B. E. Feldman, I. Kimchi, A. C. Potter, Q. D. Gibson, R. J. Cava, A. Vishwanath, and A. Yazdani, Landau quantization and quasiparticle interference in the three-dimensional Dirac semimetal Cd₃As₂, Nature Materials 13, 851 (2014).DOI
  27. [28]J. N. Nelson, I. A. Leahy, A. D. Rice, C. Brooks, G. Teeter, M. van Schilfgaarde, S. Lany, B. Fluegel, M. Lee, and K. Alberi, Direct link between disorder and magnetoresistance in topological semimetals, Phys. Rev. B 107, L220206 (2023).DOI
  28. [29]E. G. Maksimov, I. I. Maxin, S. Y. Savrasov, and Y. A. Uspenski, Excitation spectra of semiconductors and insulators: a density-functional approach to many-body theory, Journal of Physics: Condensed Matter 1, 2493 (1989).DOI
  29. [30]M. van Schilfgaarde and M. I. Katsnelson, First-principles theoretical study of nonlocal screening in graphene, Phys. Rev. B 83, 081409 (2011).DOI
  30. [31]M. Grüning, A. Marini, and A. Rubio, Density functionals from many-body perturbation theory: The band gap for semiconductors and insulators, J. Chem. Phys. 124, 154108 (2006).pubmed.ncbi.nlm.nih.gov/16674219
  31. [32]S. Baidya and D. Vanderbilt, First-principles theory of the Dirac semimetal Cd₃As₂ under Zeeman magnetic field, Phys. Rev. B 102, 165115 (2020).DOI
  32. [33]A. A. Burkov and L. Balents, Weyl semimetal in a topological insulator multilayer, Phys. Rev. Lett. 107, 127205 (2011).DOI
  33. [34]I. Panfilov, A. A. Burkov, and D. A. Pesin, Density response in Weyl metals, Phys. Rev. B 89, 245103 (2014).DOI
  34. [35]A. Bastin, C. Lewiner, O. Betbed er-Matibet, and P. Nozieres, Quantum oscillations of the Hall effect of a Fermion gas with random impurity scattering, J. Phys. Chem. Solids 32, 1811 (1971).
  35. [36]A. Crépieux and P. Bruno, Theory of the anomalous Hall effect from the Kubo formula and the Dirac equation, Phys. Rev. B 64, 014416 (2001).
  36. [37]H. Bruus and K. Flensberg, Many-Body Quantum Theory in Condensed Matter Physics: An Introduction (Oxford University Press, Oxford, 2004).
  37. [38]F. T. Vasko and O. E. Raichev, Quantum Kinetic Theory and Applications: Electrons, Photons, Phonons (Springer, New York, 2005).DOI
  38. [39]T. Morimoto and H. Aoki, Flow diagram of the longitudinal and Hall conductivities in ac regime in the disordered graphene quantum hall system, Journal of Physics: Conference Series 400, 042047 (2012).DOI
  39. [40]M. Gradhan, D. V. Fedorov, F. Pientka, P. Zahn, I. Mertig, and B. L. Györffy, First-principle calculations of the Berry curvature of Bloch states for charge and spin transport of electrons, Journal of Physics: Condensed Matter 24, 213202 (2012).
  40. [41]O. V. Kotov and Y. E. Lozovik, Dielectric response and novel electromagnetic modes in three-dimensional Dirac semimetal films, Phys. Rev. B 93, 235417 (2016).DOI
  41. [42]J. Hofmann and S. D. Sarma, Surface plasmon polaritons in topological Weyl semimetals, Phys. Rev. B 93, 241402 (2016).
  42. [43]O. V. Kotov and Y. E. Lozovik, Giant tunable nonreciprocity of light in Weyl semimetals, Phys. Rev. B 98, 195446 (2018).DOI
  43. [44]B. Zhao, C. Guo, C. A. C. Garcia, P. Narang, and S. Fan, Axion-field-enabled nonreciprocal thermal radiation in Weyl semimetals, Nano Letters 20, 1923 (2020).DOI
  44. [45]M. Smith, V. L. Quito, A. A. Burkov, P. P. Orth, and I. Martin, Theory for Cd₃As₂ thin films in the presence of magnetic fields, Phys. Rev. B 109, 155136 (2024).DOI

Paper details

vlnc:W_fzmcx4am
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents