betaFeedback

WorksPhysics and Astronomy

Ferroelectric switchable altermagnetism

Abstract

We propose a novel ferroelectric switchable altermagnetism effect, the reversal of ferroelectric polarization is coupled to the switching of altermagnetic spin splitting. We demonstrate the design principles for the ferroelectric altermagnets and the additional symmetry constraints necessary for switching the altermagnetic spin splitting through flipping the electric polarization based on the state-of-the-art spin-group symmetry techniques. 22 ferroelectric altermagnets are found by screening through the 2001 experimental reported magnetic structures in the MAGNDATA database and 2 of them are identified as ferroelectric switchable altermagnets. Using the hybrid improper ferroelectric material [C(NH2)3]Cr(HCOO)3 as an example, we show how the altermagnetic spin splitting is tightly coupled to the ferroelectric polarization, providing an ideal platform for designing electric-field-controllable multiferroic devices. Finally, we find that such manipulation of altermagnetism can be detected by monitoring the physical quantities that are related to the non-vanishing Berry curvature dipole, such as the linearly polarized photogalvanic spin current.

Ferroelectric switchable altermagnetism

Introduction

Multiferroic materials exhibit more than one type of ferroic order simultaneously, such as ferroelectricity (spontaneous electric polarization) and magnetism (ferromagnetism or antiferromagnetism) [1]. In particular, magnetoelectrically coupled multiferroic materials have attracted significant interest due to their potential for controlling magnetic properties through electric fields, and vice versa, opening pathways for innovative applications in memory storage, sensors, and spintronics [2, 3, 4, 5]. Multiferroics are broadly categorized into two types [6]. In type-I multiferroics, ferroelectric and magnetic orders originate from distinct mechanisms [7, 8], which often results in weak coupling between these order parameters. In contrast, type-II multiferroics demonstrate stronger coupling because ferroelectricity arises directly from magnetic ordering [9]. Historically, the design and manipulation of multiferroicity primarily rely on the interaction between net magnetic moments and electric polarization [10]. For example, in multiferroic antiferromagnet Ca3Mn2O7{{\mathrm{Ca}}_3\mathrm{Mn}_2\mathrm{O}_7}, the multiferroic coupling stems from the ferroelectric polarization and the net magnetic moment induced by spin-orbit coupling (SOC), i.e., Dzyaloshinskii–Moriya interaction [11]. However, the small weak FM magnetization (0.045 μB\mu_{\mathrm{B}}/Mn in theory and 0.0025 μB\mu_{\mathrm{B}}/Mn in experiment) [12] limits the strength of magnetoelectric coupling and thus the multiferroic applications.

Recently, altermagnetism has garnered considerable attention [13, 14, 15, 16] as a promising avenue for achieving novel spintronic properties. Altermagnets are a class of collinear antiferromagnetic (AFM) materials characterized by alternating spin polarization across reciprocal space due to breaking of certain spatial symmetries, even though they have no net macroscopic magnetization. The order parameter SS featuring altermagnetism can be represented by the energy splitting between the two spin channels in certain paths of the Brillouin zone ΔEk=Ek↑−Ek↓\Delta E_{\mathbf{k}}=E_{\mathbf{k}}^{\uparrow}-E_{\mathbf{k}}^{\downarrow}. The spin-split bands of Bloch electrons in altermagnets create the possibility of designing new types of spintronic devices, e.g., spin-filtering magnetic tunnel junctions [17, 18]. Due to the combination of the advantages of FM and AFM in terms of spin splitting, altermagnetism is also considered a third type of collinear magnetism [14, 19].

In this Letter, we introduce the ferroelectric switchable altermagnets, a new class of materials which shows not only the coexistence of ferroelectricity and altermagnetism, but also the synergistic coupling of the two order parameters, leading to a reversal of spin-character in the splitted energy bands by switching the ferroelectric polarization. As illustrated in Figure 1(a), in specific circumstances, the altermagnetic spin degree of freedom is tightly correlated to the electric polarization, indicating a distinct form of magnetoelectric coupling. Such a mechanism enables the control of a nonvolatile spin-split electronic dispersion through the external electric field, providing an efficient route to achieve robust all-in-one multiferroic memory devices. For example, Figure 1(b) illustrates an electric-field-controllable spin-filtering altermagnetic tunnel junction device without the need of switching the Néel vector. By considering whether the spin-polarized Fermi surface between the free layer and the fixed layer match or not [14], the conductance σ\sigma can be switched between high and low by simply switching the ferroelectric polarization. By applying the state-of-the-art spin-group symmetry analyses, we searched through all the MAGNDATA database [20] and screened out 22 ferroelectric altermagnets, in which only two candidates support the synergistic switching of altermagnetic spin splitting through ferroelectric polarization.

Image not extracted

Figure 1. (a) Schematic illustration of ferroelectric switchable altermagnetism, where the altermagnetic spin splitting SS strongly couples to the ferroelectric polarization PP. (b) A non-volatile spin filtering tunnel junction device design with ferroelectric switchable altermagnets. The Fermi surfaces of the fixed layer and the free layer are also illustrated. The electric polarization PP can be used to control the spin polarization of the free layer, leading to a transition between high- and low-conductance (σ\sigma) states.

In order to discuss a representative case of the ferroelectric switchable altermagnets, we perform first-principles calculations on the metal-organic framework (MOF) system [C(NH2)3]Cr(HCOO)3[\mathrm{C}(\mathrm{NH}_{2})_{3}]\mathrm{Cr}(\mathrm{HCOO})_{3}, which we will denote as Cr-MOF hereafter. This compound is isostructural to Cu-MOF found in MAGNDATA and is particularly interesting since it expands the search for potentially interesting altermagnets to the extremely tunable and versatile class of hybrid organic-inorganic perovskites for functional materials design. Cr-MOF has been experimentally synthesized, and it has been proposed as hybrid improper ferroelectric [21, 22]. Here, we predict that the altermagnetic spin splitting in this material is tightly coupled to the ferroelectric polarization, in both the magnitude and the sign of ΔEkS\Delta E_{k}^{S}, providing an ideal platform for designing electric-field-controllable spintronic devices. Finally, we find that the manipulation of altermagnetism can be monitored by the nonlinear optical generation of spin current, which originates from the non-zero Berry curvature dipole.

Material design principles - Altermagnetic spin splitting is a non-relativistic property that manifests without the need for spin-orbit coupling (SOC), where the symmetry-theoretical framework should adopt spin space group (SSG) [15] [23, 24, 25, 26, 27] instead of the commonly used magnetic space group (MSG). We first consider ferroelectric altermagnets where the two order parameters PP and SS are not necessarily coupled. Two rules under the framework of SSG emerge: i) For a collinear antiferromagnet manifesting spin splitting in the momentum space, the symmetries of joint parity and time-reversal (PT\mathcal{P}\mathcal{T}) and Tτ\mathcal{T}\tau with τ\tau being the fractional lattice translation, should be broken; ii) For ferroelectric material, the spatial part of the parent space group (SG) of the SSG should belong to a polar group.

We diagnosed the SSGs of the 2001 experimentally reported magnetic structures in the MAGNDATA database by using our homemade online program FINDSPIN-GROUP [28], and found 22 systems that meet the above criteria. One immediately finds that the filtered materials can be divided into two classes by examining the MSG of the materials: the MSG of the first class allows weak spin canting, leading to a non-zero residual ferromagnetic (FM) moment, while the second class forbids net magnetic moment in the system. For the first class with PP-MM coupling, the electronic polarization can interplay with the weak FM moment, leading to a classical magnetoelectric coupling [11]. Note that SOC plays an essential role (e.g., Dzyaloshinskii-Moriya interaction) in slightly tilting the spins from the collinear AFM configuration. For the second class without PP-MM coupling, since the net magnetic moment is forbidden by MSGs, the flipping of electric polarization is not supposed to induce any macroscopic effect on the magnetization. However, both two classes are potential candidates for ferroelectric switchable altermagnets if the real-space electric polarization and the momentum-space spin splitting are coupled, even without SOC.

In general, the coexistence of electric polarization PP and altermagnetic spin splitting ΔEkS\Delta E_{k}^{S} (denoted by SS) does not guarantee their coupling. Therefore, we next focus on the search of symmetry operations that synergistically switch PP and SS, and if these operations correspond to reasonable flipping paths under an external electric field, which does not change the Néel order. For example, considering an initial state ψki(P,S)\psi_{k}^{i}(P,S), one can always flip both electric and spin polarization by applying a joint operation PT\mathcal{P}\mathcal{T} to the system to get a reversed state PTψki(P,S)=ψkf(−P,−S)\mathcal{P}\mathcal{T}\psi_{k}^{i}(P,S)=\psi_{k}^{f}(-P,-S). However, in the transition path connecting ψkf(−P,−S)\psi_{k}^{f}(-P,-S) and ψki(P,S)\psi_{k}^{i}(P,S) phases, the Néel vector may also be reversed, indicating a transition path that cannot be achieved by electric field only. By going through the list in TABLE SI in Supplementary Materials, we found that the sign of ΔEkS\Delta E_{k}^{S} for most candidates remains unchanged during the polarization reversal, as exemplified by PbNiO3_{3} in Supplementary Materials Sec. III. Interestingly, there are two hybrid improper ferroelectric materials, Ca3Mn2O7\mathrm{Ca}_3\mathrm{Mn}_2\mathrm{O}_7 and [C(NH2)3]Cr(HCOO)3[\mathrm{C}(\mathrm{NH}_2)_3]\mathrm{Cr}(\mathrm{HCOO})_3, as prototypical candidates of ferroelectric switchable altermagnets.

Altermagnetism in hybrid improper ferroelectric Cr-MOF

Hybrid improper ferroelectricity arises from a combination of two or more lattice modes that individually preserve inversion symmetry but collectively breaks it, resulting in a spontaneous polarization. Several candidate materials from Class 1 in TA-BLE SI belong to this category, including Ca3Mn2O7\mathrm{Ca}_3\mathrm{Mn}_2\mathrm{O}_7 (SG Cmc21Cmc2_1) [29] and the hybrid organic-inorganic perovskite [C(NH2)3]M(HCOO)3[\mathrm{C}(\mathrm{NH}_2)_3]\mathrm{M}(\mathrm{HCOO})_3 (SG Pna21Pna2_1) with M being transition-metal elements Cu or Cr. Below we use Cr-MOF (see Figure 2(a)) to illustrate the design principles of ferroelectric switchable altermagnets for two reasons: (a) it exhibits the largest spin splitting near the Fermi level among this material family, and (b) various AFM configurations can be realized in Cr-MOF through compressive strain, offering an additional degree of freedom for phase manipulation [30]. Moreover, the compositional tunability in this family offers more flexibility in designing materials for spin-splitting magnitude optimization. While A-, C- and G-type AFM Cr-MOF are all altermagnets, here we focus on the C-type configuration, as it manifests the largest spin splitting near the Fermi level. Further discussions on other MOFs and AFM configurations can be found in the Supplementary Materials Sec. IV.

Image not extracted

Figure 2. (a) Crystal structure of Cr-MOF. (b) Spin-split band structure of Cr-MOF. (c) Spin-resolved isoenergy contour (E=−0.05E=-0.05 eV) for the (P,S)(P,S) state at the kz=0.25k_z=0.25 plane, blue and red denote the spectral weight for spin up and spin down, respectively. (d) Same as (c), but for the (−P,−S)(-P,-S) state. (e) The sign of ΔEkS\Delta E_k^S for the VBM in reciprocal space.

The spin-polarized band structure obtained from density functional theory (DFT, see Supplementary Materials Sec. I for details) calculations is shown in Figure 2(b). The band gap is about 3 eV, ensuring a good insulating background that is favorable for ferroelectrics. Notably, a large spin splitting is observed at the valence band maximum (VBM), with the largest energy difference being approximately 20 meV. Such spin splitting occurs at the relatively low-symmetry points in reciprocal space, such as along the Γ(0,0,0)→R(0.5,0.5,0.5)\Gamma(0,0,0) \rightarrow R(0.5,0.5,0.5) path. The spin-polarized isoenergy contour at E=−0.05E=-0.05 eV is shown in Figure 2(c), showing a deviated feature compared with the so-called “d-wave” altermagnetism because of the absence of four-fold symmetry. Furthermore, the sign of ΔEkS\Delta E_k^S, as well as the spin polarization of a given spin-polarized band, are odd under mirror operations {1∣∣m100}\{1||m_{100}\} and {1∣∣m010}\{1||m_{010}\}, and even under {1∣∣m001}\{1||m_{001}\}, as illustrated in Figure 2(e).

Synergistically switch of electric and spin polarizations

Here, a state with the coexistence of polarization PP (P//zP//z) and altermagnetism SS is denoted as the (P,S)(P,S) state. The SSG operations that map P→−PP \rightarrow-P and S→−SS \rightarrow-S are analyzed and listed in Fig. S3. While the SSG operations connecting PP to −P-P state can be one of the following: {1∣∣−1}\{1||-1\}, {1∣∣2100}\{1||2_{100}\}, {1∣∣2010}\{1||2_{010}\}, {−1∣∣−1}\{-1||-1\}, {−1∣∣2100}\{-1||2_{100}\}, and {−1∣∣2010}\{-1||2_{010}\}, only three of them map the (P,S)(P,S) state to the (−P,−S)(-P,-S) state, i.e., {1∣∣2100}\{1||2_{100}\}, {1∣∣2010}\{1||2_{010}\}, and {−1∣∣−1}\{-1||-1\}. In addition, whether the (−P,−S)(-P,-S) state can be experimentally realized upon the application of an electric field, however, depends on the energy barrier between the two phases, which is ultimately governed by the internal atomic displacements during the phase transition.

The search for the reversed polarization state can also be achieved by considering the mode decomposition of hybrid improper ferroelectricity. The electric polarization of Cr-MOF along the zz direction is activated by two non-polar lattice distortion modes through a trilinear coupling F=γQX1−QX4+QPF=\gamma Q_{X_1^-}Q_{X_4^+}Q_P, where QX1−Q_{X_1^-}, QX4+Q_{X_4^+} and QPQ_P represent the amplitudes of the two zone-boundary non-polar distortion modes and the polar distortion mode, respectively, relative to the high symmetry ImmaImma phase [21]. Reversing either of the zone-boundary modes flips the polarization P→−PP \rightarrow-P, while reversing both preserves PP. As shown in Figure 3(a), the X1−X_1^- mode consists of two major distortions: a “scissor”-like distortion for the equatorial Cr-O bonds and a rotation of the guanidinium molecule by about 42∘42^\circ. The X4+X_4^+ mode corresponds primarily to a Q2Q_2 Jahn-Teller (JT) distortion of the Cr octahedra, with minimal impact on the organic molecules. Starting from the ImmaImma structure, imposing only the X1−(X4+)X_1^-(X_4^+) mode results in a centrosymmetric PnnaPnna (PnmaPnma) structure. The combination of both X1−X_1^- and X4+X_4^+ modes leads to the Pna21Pna2_1 structure, a polar SG that induces the softening of the polar distortion. Since the polar distortion is a secondary effect arising from the coupling of the zone-boundary modes, the interplay between these two modes fully determines the final structure and its related properties in this system. For simplicity, and without loss of generality, we will use these two unstable modes (X1−X_1^- and X4+X_4^+) as variables in the discussion below.

Image not extracted

Figure 3. (a) The hybrid improper coupled zone-boundary distortion modes in Cr-MOF. (b) Energy landscape for the coupling of the X1−X_{1}^{-} and X4+X_{4}^{+} modes, where different transition paths are marked by yellow and purple dashed lines. (c) Energy profiles along the two paths denoted in (b). (d) Spin splitting as a function of the interpolation structural parameter ξ\xi. The insets in (d) denote the Q2Q_{2} JT pattern at the endpoints, with the pink and blue diamonds denote the octahedra centered with the spin-up and spin-down Cr, respectively. The elongated octahedra form an antiferro-distortive JT distortion pattern associated to the orbital-ordering which “pseudo-rotate” from the two endpoints (P,S)(P,S) and (−P,−S)(-P,-S).

Figure 3(b) shows the energy landscape of the coupled zone-boundary modes relative to the ImmaImma phase. Starting from the energetically favored (P,S)(P,S) ground state, if the amplitude of X1−X_{1}^{-} mode is continuously reduced and eventually reversed its sign, the structure transforms to a (−P,S)(-P,S) state. This transition path, indicated by the purple line in Figure 3(b), passes through a centrosymmetric PnmaPnma phase. The (−P,S)(-P,S) state and the original (P,S)(P,S) state are related by {1∣∣m001}\{1||m_{001}\} SSG operation. The energy barrier is about 4 eV per unit cell, as shown in the left panel of Figure 3(c). Such a high energy barrier is attributed to the large atomic distortion amplitude (∼6.3\sim6.3 Å) along this path, primarily due to the rotation of the guanidinium molecule. In sharp contrast, when the X4+X_{4}^{+} mode is continuously tuned to the reversed amplitude, the transition occurs via a PnnaPnna reference phase (orange line in Figure 3(b)). This path leads to the (−P,−S)(-P,-S) state, connected by {1∣∣2100}\{1||2_{100}\} SSG operation, with a significantly lower energy barrier of approximately 0.1 eV (the right panel of Figure 3(c)), nearly 40-times smaller than that for the PnmaPnma path. Thus, the (P,S)→(−P,−S)(P,S) \to(-P,-S) structural transition through the PnnaPnna path is energetically favored and represents a possible realistic transition pathway when polar direction is flipped by an external electric field.

The spin reversal of the isoenergy contour for the (−P,−S)(-P,-S) state shown in Figure 2(d) strongly supports the possibility to control altermagnetic spin splitting by flipping the ferroelectric polarization in this system. To quantify this transition, we define a normalized interpolating structural parameter ξ\xi, where ξ=1\xi= 1 represents the (P,S)(P,S) structure and ξ=−1\xi= -1 corresponds to either the (−P,S)(-P,S) or (−P,−S)(-P,-S) structure. The evolution of ΔEks\Delta E_{k}^{s} during the structural transition is plotted in Figure 3(d). We found that ΔEks\Delta E_{k}^{s} changes monotonically during the (P,S)→(−P,−S)(P,S) \to(-P,-S) transition, while in the (P,S)→(−P,S)(P,S) \rightarrow(-P,S) transition it reduces to zero at the PnmaPnma phase and then regresses to its original value. Such behavior arises because ΔEsP\Delta E_s^{P} is odd under {1∥2100}\{1\Vert2_{100}\} but even under {1∥m001}\{1\Vert m_{001}\}, consistent with the symmetry presented in Figure 2(e). Furthermore, the microscopic mechanism of the reversal of the altermagnetic spin splitting by reversing the X4+X_4^+ mode can be understood by the change of the Q2Q_2 JT distortion pattern, as illustrated in the insets of Figure 3(d). Since the JT distortion is known to couple with the orbital ordering in oxide perovskites [31] and MOF systems [32], our results provide a concrete example of how altermagnetism can be entangled with orbital ordering [33], offering new insights into the control of spin splitting through orbital as well as lattice degrees of freedom.

To illustrate the electric-field-controllable altermagnetic tunnel junction device, we consider a prototypical homojunction system proposed in Figure 1(b), where both the fixed and free layers are composed of Cr-MOF. We evaluate the giant magnetoresistance (GMR) by the ratio between the DFT-calculated longitudinal conductivity of the spin-up and spin-down channels along the [110][110] direction [34]. Based on a 184-atom 2×2\sqrt{2} \times\sqrt{2} supercell, our results suggest that the maximum GMR rate for this system could reach approximately 53% (see Fig. S5 and Supplementary Materials Sec. VI for details), validating the potential of ferroelectric switchable altermagnetism for non-volatile spintronic devices.

Detection of the switch of altermagnetic spin splitting - The direct experimental detection of the AFM-induced spin splitting typically requires advanced techniques such as spin-resolved angle-resolved photoemission spectroscopy [35, 36]. Since the Néel vector remains unchanged through (P,S)→(−P,−S)(P,S) \rightarrow(-P,-S) transition, we propose a way to detect the switch of altermagnetic spin splitting through the linear-polarized photogalvanic spin current effect (spin LPGE), which directly couples to the spin polarization through nonlinear optical response. By using the SSG symmetry analysis implemented in FINDSPINGROUP, we find that six non-zero Berry curvature dipole (BCD) tensor elements (DxxzD_{xxz}, DxzxD_{xzx}, DzxxD_{zxx}, DyyzD_{yyz}, DyzyD_{yzy}, DzyyD_{zyy}) are allowed without SOC in Cr-MOF. All the other tensor elements, such as the quantum metric dipole and inverse mass dipole [37], are forbidden. The non-zero BCD can induce a nonlinear Hall current in transport measurement, as well as the spin LPGE from an optical perspective. Due to the broken spatial inversion symmetry, a shift current is expected under linear-polarized light excitation [38]. In Cr-MOF system, both charge and spin currents can be generated: the charge current reflects the direction of the electric polarization PP, while the spin current serves as a signature of the difference between the two spin channels, i.e. the spin splitting.

The spin LPGE conductivity component σ↑→↓zyy\sigma_{\uparrow\rightarrow\downarrow}^{zyy} for the (P,S)(P,S) and (−P,−S)(-P,-S) states is shown in Figure 4. A non-

Image not extracted

Figure 4. The spin LPGE conductivity component σ↑→↓zyy\sigma_{\uparrow\rightarrow\downarrow}^{zyy} for the (P,S)(P,S) and (−P,−S)(-P,-S) states.

zero dc current begins to emerge when the photon energy exceeds the band gap, reaching the first peak at about 3.2 eV with a value of about 0.23 μ\muA/V2^2. The second peak, near 4 eV, is attributed to the spin splitting at the higher conduction bands. During the (P,S)→(−P,−S)(P,S) \rightarrow(-P,-S) structure transition, the sign of the spin LPGE current reverses. Therefore, the spin LPGE current can serve as a signature of the reversal of the altermagnetic spin splitting.

Conclusion and discussion - Recently, the gate-field control of different spin channels in layered altermagnets through spin-valley-layer locking effect has been proposed [39, 40], highlighting the importance for the manipulation of spin degree of freedom in altermagnets. However, such a non-versatile strategy requires the constant application of an external electric field, which is not favorable for storage devices unless further integration with other materials. Sliding ferroelectricity [41] or phase transition between ferroelectric and antiferroelectric states [42] can also be used to tune the PTPT symmetry in the two dimensional van der Waals systems, which eventually control the emergence of the altermagnetic state. Considering that the hybrid improper ferroelectric materials can be artificially designed by chemistry or strain engineering [43], our study provides a wide configuration space for designing versatile ferroelectric switchable altermagnets.

Our approach provides a novel method for controlling spin properties through ferroelectric polarization, which differs from traditional magnetoelectric multiferroics where ferroelectricity is used to control the net magnetic moment. For the Class 1 candidate Ca3_3Mn2_2O7_7, the energy splitting (∼100\sim100 meV) is even larger than that of Cr-MOF. Spin canting is allowed in this system, leading to a weak net ferromagnetic moment MM. Our symmetry analysis shows that the order parameter for spin splitting SS follows the same transformation rules as that for MM [11], which can be detected by the anomalous Hall effect. Therefore, an additional order parameter MM is added to the coupled degrees of freedom, i.e., (P,M,S)(P, M, S), offering multiple tuning knobs for material manipulation and providing enhanced versatility in device design (see Supplementary Materials Sec. V for details). In contrast, for the Class 2 candidates with no net magnetic moment, the most traditional magnetic detection method such as magneto-optical Kerr effect [16] [44] could be effective, our approach still offers a viable pathway to achieve magnetoelectric coupling by correlating the electric polarization with spin splitting in reciprocal space. To conclude, ferroelectric switchable altermagnetism is a new type of magnetoelectric coupling beyond what is achievable in traditional multiferroics based solely on the spin-orbit interaction, paving a new functional materials platform for designing all-electric-controlled spintronic devices.

Note added - Recently, we became aware of a related study on Ca3_3Mn2_2O7_7 for the “altermagnetoelectric effect” [45], a concept similar to the ferroelectric switchable altermagnetism proposed in our work.

Acknowledgments

A.S. thanks useful discussions with P. Radaelli (Oxford University), P. Barone (CNR-SPIN), Sang-Wook Cheong (Rutgers University) and Xinfeng Chen (Xi’an Jiaotong University). This work was supported by the National Key R&D Program of China under Grant No. 2019YFA0704900, the National Natural Science Foundation of China under Grant No. 12274194 and 12474232, Guangdong Provincial Key Laboratory for Computational Science and Material Design under Grant No. 2019B030301001, Shenzhen Science and Technology Program (Grants No. RCJC20221008092722009 and No. 20231117091158001), the Innovative Team of General Higher Educational Institutes in Guangdong Province (Grant No. 2020KCXTD001), Guangdong Provincial Quantum Science Strategic Initiative under Grant No. GDZX2401002, the Science Technology and Innovation Commission of Shenzhen Municipality (JCYJ20210324104812034), Natural Science Foundation of Guangdong Province (2021A1515110389) and Center for Computational Science and Engineering of Southern University of Science and Technology. This work has been funded by the European Union - NextGenerationEU, Mission 4, Component 1, under the Italian Ministry of University and Research (MUR) National Innovation Ecosystem grant ECS00000041-VITALITY-CUP B43C22000470005. We also acknowledge the support by bilateral agreement for scientific collaboration CNR and NSFC (China), “Ferroelectric and chiral hybrid organic inorganic perovskites”, for the years 2024-2025 (CUP B53C2300716000). K.Y. was supported with an individual grant (No. CG092501) at Korea Institute for Advanced Study.

† [email protected]

References

References

  1. [1]H. Schmid, Multi-ferroic magnetoelectrics, Ferroelectrics 162, 317 (1994).DOI
  2. [2]N. A. Spaldin, Multiferroics: Past, present, and future, MRS Bulletin 42, 385 (2017).
  3. [3]R. Ramesh and N. A. Spaldin, Multiferroics: progress and prospects in thin films, Nat Mater 6, 21 (2007).
  4. [4]M. Fiebig, T. Lottermoser, D. Meier, and M. Trassin, The evolution of multiferroics, Nature Reviews Materials 1, 16046 (2016).DOI
  5. [5]X.-Z. Lu and J. M. Rondinelli, Design of new multiferroic oxides, Handbook of Materials Modeling: Applications: Current and Emerging Materials , 1151 (2020).
  6. [6]D. Khomskii, Classifying multiferroics: Mechanisms and effects, Physics 2, 20 (2009).DOI
  7. [7]J. Wang, J. B. Neaton, H. Zheng, V. Nagarajan, S. B. Ogale, B. Liu, D. Viehland, V. Vaithyanathan, D. G. Schlom, U. V. Waghmare, N. A. Spaldin, K. M. Rabe, M. Wuttig, and R. Ramesh, Epitaxial bifeo3 multiferroic thin film heterostructures, Science 299, 1719 (2003).pubmed.ncbi.nlm.nih.gov/12637741
  8. [8]B. B. Van Aken, T. T. M. Palstra, A. Filippetti, and N. A. Spaldin, The origin of ferroelectricity in magnetoelectric ymno3, Nature Materials 3, 164 (2004).pubmed.ncbi.nlm.nih.gov/14991018
  9. [9]T. Kimura, T. Goto, H. Shintani, K. Ishizaka, T. Arima, and Y. Tokura, Magnetic control of ferroelectric polarization, Nature 426, 55 (2003).pubmed.ncbi.nlm.nih.gov/14603314
  10. [10]M. Mostovoy, Multiferroics: different routes to magnetoelectric coupling, npj Spintronics 2, 18 (2024).DOI
  11. [11]N. A. Benedek and C. J. Fennie, Hybrid improper ferroelectricity: A mechanism for controllable polarization-magnetization coupling, Physical Review Letters 106, 107204 (2011).
  12. [12]M. Liu, Y. Zhang, L.-F. Lin, L. Lin, S. Yang, X. Li, Y. Wang, S. Li, Z. Yan, X. Wang, X.-G. Li, S. Dong, and J.-M. Liu, Direct observation of ferroelectricity in ca3mn2o7 and its prominent light absorption, Applied Physics Letters 113, 022902 (2018).DOI
  13. [13]S. Hayami, Y. Yanagi, and H. Kusunose, Bottom-up design of spin-split and reshaped electronic band structures in antiferromagnets without spin-orbit coupling: Procedure on the basis of augmented multipoles, Phys. Rev. B 102, 144441 (2020).
  14. [14]L. Šmejkal, J. Sinova, and T. Jungwirth, Emerging research landscape of altermagnetism, Physical Review X 12, 040501 (2022).arxiv.org/abs/2204.10844
  15. [15]L. Šmejkal, J. Sinova, and T. Jungwirth, Beyond conventional ferromagnetism and antiferromagnetism: A phase with nonrelativistic spin and crystal rotation symmetry, Physical Review X 12, 031042 (2022).DOI
  16. [16]P. G. Radaelli, Tensorial approach to altermagnetism, Phys. Rev. B 110, 214428 (2024).arxiv.org/abs/2407.13548
  17. [17]K. Samanta, D.-F. Shao, and E. Y. Tsymbal, Spin filtering with insulating altermagnets, arXiv e-prints , arXiv:2409.00195 (2024).arxiv.org/abs/2409.00195
  18. [18]B. Chi, L. Jiang, Y. Zhu, G. Yu, C. Wan, and X. Han, Anisotropic spin filtering by an altermagnetic barrier in magnetic tunnel junctions, arXiv e-prints , arXiv:2409.03415 (2024).DOI
  19. [19]L. Bai, W. Feng, S. Liu, L. Šmejkal, Y. Mokrousov, and Y. Yao, Altermagnetism: Exploring new frontiers in mag-

Paper details

vlnc:W_g3ex3ufe
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents