betaFeedback

WorksPhysics and Astronomy

Exploring the QCD phase diagram with three flavors of Möbius domain wall fermions

Abstract

We present an update on the study of the QCD phase transition with 3 flavors of Möbius domain wall fermions at zero baryon density. We performed simulations on lattices of size 363×12×1636^3\times12\times16 and 243×12×3224^3\times12\times32 with a variety of quark masses at a fixed lattice spacing a=0.1361(20)a=0.1361(20) fm, which correspond to a temperature 121(2) MeV. By analyzing the chiral condensate, chiral susceptibilitities and Binder cumulant on 363×12×1636^3\times12\times16 lattices together with the result obtained from our previous study on 243×12×1624^3\times12\times16 lattices, we identified a crossover occurring at quark mass around mqMS‾(2 GeV)∼3−4m_q^{\mathrm{\overline {MS}}}(2\, \mathrm{GeV}) \sim 3-4 MeV for this temperature. Besides, we show the effects of residual chiral symmetry breaking on chiral condensate and chiral susceptibilities between Ls=16L_s=16 and 32.

Introduction

The QCD chiral phase transition for three degenerate quark flavors, on the lower left corner of the Columbia plot, is yet to be determined. Based on the renormalization group flow of 3D linear sigma model, Pisarski and Wilczek predicate a first-order transition in the Nf=3N_f = 3 chiral limit [2]. If this is the case, the first-order phase transition weakens moving away from the chiral limit and finally terminates at a critical point of a second-order transition belonging to the 3D Z(2) Ising universality class. On the contrary, a recent study of the RG flow of all couplings up to ϕ6\phi^6 in 3D Ginzburg-Landau theory claims a possible second order phase transition in the Nf=3N_f = 3 chiral limit [3]. Whether the first-order region exists in the Nf=3N_f = 3 light quark regime at all is still an open question. If the first-order region exists, then what is the value of the critical mass? Answering those questions requires nonperturbative lattice QCD simulations.

It is quite difficult to pin down the location of critical mass or to determine the order of phase transition in the Nf=3N_f = 3 chiral regime using lattice QCD simulations, as the computational cost increases significantly when simulating smaller quark masses. Previous studies using Wilson and staggered, or their improved fermion actions, showed that the bound of critical pion mass decreases towards finer lattices, and the critical pion mass obtained from Wilson-type fermions differs significantly from those obtained from staggered ones [4, 5, 6, 7, 8, 9]. This indicates strong cutoff and discretization scheme dependence. A recent study with unimproved staggered fermions suggests a second-order chiral phase transition for Nf=3N_f = 3 massless quark flavors [10]. Later, a study using the Highly Improved Staggered Quark action also did not find evidence of a phase transition in pion mass range between 80 and 140 MeV [11]. This leaves little room for a first order region to exist, but it cannot be ruled out. The current existing results are either from staggered or Wilson type fermions which break chiral symmetry partially or entirely. Therefore, it is important to study using a chiral fermion formulation, which preserves chiral symmetry on the lattice, to further investigate this problem. We use the Möbius domain wall fermion to study the Nf=3N_f = 3 chiral region in this work.

Lattice Setup

Using the tree-level improved Symanzik gauge action and Möbius domain wall fermion action [12], we conducted Nf=3N_f = 3 QCD simulations using the Grid code set optimized for the Fugaku CPU A64FX [13]. We fixed the gauge coupling at β=4.0\beta= 4.0, corresponding to a lattice spacing of a=0.1361(20)a = 0.1361(20) fm. This value was determined from the Wilson flow t0t_0, employing the result of continuum-extrapolated t0t_0 at physical quark mass for Nf=2+1N_f = 2+1 QCD as input [14]. In our previous study [1], we conducted simulations on 243×12×1624^3 \times12 \times16 lattices with 26 bare quark masses ranging from −0.006-0.006 to 0.10.1. For this work, we performed a large volume simulation on 363×12×1636^3 \times12 \times16 lattices with 7 bare quark masses within the range of [−0.005,0.001][-0.005, 0.001], aiming to study the volume effect. Additionally, for studying the residual chiral symmetry breaking effect, we performed simulations on 243×12×3224^3 \times12 \times32 lattices with 5 bare quark masses ranging from −0.001-0.001 to 0.0030.003. Each parameter set involved approximately 20,000 trajectories, and measurements were taken at every 10th trajectory.

Numerical Results

Chiral observables

The chiral condensate is a measure of chiral symmetry breaking in QCD. It vanishes in the chirally symmetric phase at temperature TT higher than the critical temperature TcT_c, retaining a nonzero value at T<TcT < T_c, which is the chiral symmetry broken phase. The chiral condensate is defined as a derivative of the partition function ZZ with respect to the quark mass,

⟨ψˉψ⟩=TV∂ln⁡Z∂mq=NfNs3Nt⟨Tr⁡M−1⟩(1)\langle\bar{\psi}\psi\rangle= \frac{T}{V}\frac{\partial\ln Z}{\partial m_q} = \frac{N_f}{N_s^3N_t}\left\langle\operatorname{Tr}M^{-1}\right\rangle \tag*{(1)}

Where MM denotes the Dirac matrix, and NfN_f represents the number of degenerate quark masses. At finite quark mass, the chiral condensate diverges both additively and multiplicatively in the continuum limit. The former arises from the power-law divergence, which is proportional to mqa−2m_qa^{-2}. For domain wall fermions with finite LsL_s, the leading effect of small but finite violation of chiral symmetry causes an additive renormalization to the bare input quark mass, known as the residual mass mresm_{\mathrm{res}}. There is an additional power divergence induced by this residual chiral symmetry breaking effect, which is proportional to xmresa−2xm_{\mathrm{res}}a^{-2} with an unknown coefficient xx [15]. Therefore, the chiral condensate for domain wall fermions is expected to behave as

⟨ψˉψ⟩∣DWF∼Cmq+xmresa2+⟨ψˉψ⟩∣cont+⋯ .(2)\left.\langle\bar{\psi}\psi\rangle\right|_{\mathrm{DWF}} \sim C\frac{m_q+xm_{\mathrm{res}}}{a^2}+\left.\langle\bar{\psi}\psi\rangle\right|_{\mathrm{cont}}+\cdots. \tag*{(2)}

In the chiral limit mq+mres=0m_q+m_{\mathrm{res}}=0, there still remains some UV divergent pieces, represented as C(x−1)mresa2C\frac{(x-1)m_{\mathrm{res}}}{a^2}. One way of eliminating the additive divergence is to use the finite temperature chiral condensate ⟨ψˉψ⟩∣T>0\left.\langle\bar{\psi}\psi\rangle\right|_{T>0} minus the zero temperature chiral condensate ⟨ψˉψ⟩∣T=0\left.\langle\bar{\psi}\psi\rangle\right|_{T=0} at the same quark mass, as this divergence term (Cmq+xmresa2)\left(C\frac{m_q+x m_{\mathrm{res}}}{a^2}\right) remains temperature independent. To address the remaining multiplicative logarithmic divergence, we use the bare chiral condensate divided by the quark mass renormalization constant ZmZ_m in the MS‾\overline{\mathrm{MS}} scheme at a scale of μ=2\mu=2 GeV. ZmMS‾(2 GeV)Z_m^{\overline{\mathrm{MS}}}(2\ \mathrm{GeV}) is determined using an inter/extra-polation as a function of β\beta with those determined in a non-perturbative renormalization [16]. See a description in Ref.[17] for detail. Then the renormalized chiral condensate can be defined as

[⟨ψˉψ⟩∣T>0−⟨ψˉψ⟩∣T=0]MS‾(2 GeV)=⟨ψˉψ⟩∣T>0−⟨ψˉψ⟩∣T=0ZmMS‾(2 GeV).(3)\left[\left.\langle\bar{\psi}\psi\rangle\right|_{T>0}-\left.\langle\bar{\psi}\psi\rangle\right|_{T=0}\right]^{\overline{\mathrm{MS}}}(2\ \mathrm{GeV})=\frac{\left.\langle\bar{\psi}\psi\rangle\right|_{T>0}-\left.\langle\bar{\psi}\psi\rangle\right|_{T=0}}{Z_m^{\overline{\mathrm{MS}}}(2\ \mathrm{GeV})}. \tag*{(3)}

For the determination of the transition point, we use the disconnected chiral susceptibility χdisc\chi_{\mathrm{disc}}, which describes the fluctuation of the chiral condensate. For NfN_f quark flavors, it is given by

χdisc=Nf2Ns3Nt(⟨(Tr⁡M−1)2⟩−⟨Tr⁡M−1⟩2).(4)\chi_{\mathrm{disc}}=\frac{N_f^2}{N_s^3N_t}\left(\left\langle(\operatorname{Tr}M^{-1})^2\right\rangle-\left\langle\operatorname{Tr}M^{-1}\right\rangle^2\right). \tag*{(4)}

χdisc\chi_{\mathrm{disc}} is a part of the total chiral susceptibility χσ\chi_\sigma, which is defined as the derivative of ⟨ψˉψ⟩\langle\bar{\psi}\psi\rangle with respect to the quark mass. The other part is the connected chiral susceptibility,

χσ=∂⟨ψˉψ⟩∂mq=χdisc+χcon.(5)\chi_\sigma=\frac{\partial\langle\bar{\psi}\psi\rangle}{\partial m_q}=\chi_{\mathrm{disc}}+\chi_{\mathrm{con}} . \tag*{(5)}
χcon=−NfNs3Nt⟨Tr⁡M−2⟩(6)\chi_{\mathrm{con}}=-\frac{N_f}{N_s^3N_t}\left\langle\operatorname{Tr}M^{-2}\right\rangle \tag*{(6)}

We will show the results of both disconnected chiral susceptibility and total chiral susceptibility with only multiplicative renormalization applied. Although the total chiral susceptibility suffers from an additive divergence, it is constant as a function of quark mass thus has no effect for the determination of the transition point.

On the left panel of Figure 1, we show the multiplicatively renormalized chiral condensate as a function of the renormalized quark mass for finite temperature Nt=12N_t = 12 lattices alongside zero temperature lattices. The negative finite temperature result near the chiral limit arises from the remaining UV divergent piece C(x−1)mresa2C\frac{(x-1)m_{\mathrm{res}}}{a^2}. To eliminate the UV divergence term Cmq+xmresa2C\frac{m_q+xm_{\mathrm{res}}}{a^2}, we utilize ⟨ψˉψ⟩T>0−⟨ψˉψ⟩T=0mq+mres\frac{\langle\bar{\psi}\psi\rangle_{T>0}-\langle\bar{\psi}\psi\rangle_{T=0}}{m_q+m_{\mathrm{res}}}. The zero temperature results are derived from the green dashed line representing the quadratic extrapolation based on existing zero-temperature data. Then the renormalized subtracted chiral condensate is depicted on the right panel of Figure 1. We observe a small finite volume effect, a difference between 24324^3 and 36336^3 lattices, at (mq+mres)MS‾(2 GeV)∼4−9(m_q+m_{\mathrm{res}})^{\overline{\mathrm{MS}}}(2\ \mathrm{GeV}) \sim4-9 MeV and a rapid transition at (mq+mres)MS‾(2 GeV)∼1−5(m_q+m_{\mathrm{res}})^{\overline{\mathrm{MS}}}(2\ \mathrm{GeV}) \sim1-5 MeV. To precisely locate the inflection point, we focus on the chiral susceptibilities, which are more sensitive observables for studying the phase transition as they measure the response of the chiral condensate to a small change in the quark mass.

Figure 1. Left: The multiplicatively renormalized chiral condensate on finite temperature ensembles Ns×12×16N_s \times12 \times16 with Ns=24,36N_s = 24, 36 and zero temperature ensembles 243×48×1624^3 \times48 \times16 as a function of quark mass for β=4.0\beta= 4.0. The dashed line represents the quadratic extrapolation for zero temperature chiral condensate. Right: The renormalzied subtracted chiral condensate as a function of quark mass for Ns×12×16N_s \times12 \times16 lattices with Ns=24N_s = 24 and 3636.

On the left panel of Figure 2, we present the disconnected chiral susceptibility as a function of quark mass for Nt=12N_t = 12 lattices with two different volumes. The observed transition mass point is around 4 MeV. We notice a sizeable finite volume effect in the vicinity of the transition range, approximately (mq+mres)MS‾(2 GeV)∼2−5(m_q+m_{\mathrm{res}})^{\overline{\mathrm{MS}}}(2\ \mathrm{GeV}) \sim2-5 MeV. On the right panel of Figure 2, we observe a relatively small but significant finite volume effect from the total chiral susceptibility within the same quark mass range.

Figure 2. The renormalized disconnected chiral susceptibility (left) and the multiplicatively renormalized total chiral susceptibility (right) as a function of quark mass for Nt=12N_t = 12 lattices at β=4.0\beta= 4.0.

Based on finite-size scaling analysis, if it is a true phase transition, then at the critical point, the maximum of the total chiral susceptibility would be proportional to Ns3N_s^3 for a first-order phase transition and Ns1.966N_s^{1.966} for a Z(2) second-order phase transition. However, the total chiral susceptibility contains a constant term due to UV power divergence, which is independent of volume and will distort the volume scaling. Therefore, we calculated the subtracted total chiral susceptibility χσsubMS‾\chi_{\sigma\mathrm{sub}}^{\overline{\mathrm{MS}}} with the UV divergence eliminated explicitly. The subtracted total chiral susceptibility times inverse of the scale factor for these two possibilities is depicted in Figure 3. Here, the rescaled subtracted total chiral susceptibility at the peak location significantly differs from what is expected in the case of a first-order transition or a Z(2) second order phase transition. This suggests that it’s most likely a crossover transition. The transition mass point estimated from the disconnected chiral susceptibility and total chiral susceptibility is around 4 MeV and 3 MeV, respectively. This discrepancy is understandable for a crossover, where the transition occurs over a broad range. We expect the transition mass point obtained from these two susceptibilities will concide at the chiral phase transition temperature.

Figure 3. Rescaled subtracted total chiral susceptibility with the scaling factor corresponding to a first order phase transition (left) and Z(2) second order phase transition (right) for Nt=12N_t = 12 lattices.

Binder cumulant

To investigate the nature of phase transition, we utilize the Binder cumulant of the chiral condensate B4(ψˉψ)B_4(\bar{\psi}\psi), defined by [18]

B4(ψψ‾)=⟨(δψψ‾)4⟩⟨(δψψ‾)2⟩2,δψψ‾=ψψ‾−⟨ψψ‾⟩.(7)B_4(\overline{\psi\psi}) = \frac{\langle(\delta\overline{\psi\psi})^4\rangle}{\langle(\delta\overline{\psi\psi})^2\rangle^2}, \qquad\delta\overline{\psi\psi} = \overline{\psi\psi} - \langle\overline{\psi\psi}\rangle. \tag*{(7)}

For the chiral critical point in Nf=3N_f = 3 QCD, B4(ψψ‾)B_4(\overline{\psi\psi}) will approach a universal value of 1.604 [19] on finite volumes. However, for transitions rather than critical points, B4(ψψ‾)B_4(\overline{\psi\psi}) takes a characteristic value in the infinite volume limit. Specifically, for a crossover, B4(ψψ‾)=3B_4(\overline{\psi\psi}) = 3 in the infinite volume limit. For a first-order transition, the Binder cumulant at infinite volume is B4(ψψ‾)=1B_4(\overline{\psi\psi}) = 1.

Before presenting the result of Binder cumulant, we display the distribution of the chiral condensate near the transition point for 363×12×1636^3 \times12 \times16 lattice, in the left panel of Figure 4. We observe it behaves like a Gaussian distribution rather than a double peak structure, as expected for a first order phase transition. This provides a further evidence for a crossover transition. The right panel of Figure 4 illustrates B4(ψψ‾)B_4(\overline{\psi\psi}) as a function of quark mass for Nt=12N_t = 12 lattice ensembles. The results for 363×1236^3 \times12 lattice ensembles are consistent with 3 near the transition masses of 3 and 4 MeV, as determined from the peak of total and disconnected chiral susceptibility. For 243×1224^3 \times12 lattice ensembles, the result is consistent with 3 near transition mass point 4 MeV. However, it is quite large and not consistent with 3 in one standard deviation near transition point 3 MeV but it is much far from 1.604 and 1. These indicate a crossover transition.

Figure 4. Left: The histogram of chiral condensate in the vicinity of the transition mass point for 363×12×1636^3 \times12 \times16 lattice. Right: The binder cumulant as a function of quark mass for Nt=12N_t = 12 ensembles.

Residual chiral symmetry breaking effect for different LsL_s

The Möbius domain wall fermion with finite LsL_s introduces a small but non-negligible amount of chiral symmetry breaking. To the leading order in an expansion in lattice spacing, this residual chiral symmetry breaking can be characterized by the residual mass mresm_{\mathrm{res}}, which acts as an additive shift to the bare input quark mass, resulting in the total quark mass m=mq+mresm = m_q + m_{\mathrm{res}}. One way of simulating the small value of target quark mass is to keep the value of mresm_{\mathrm{res}} small, which can be achieved by increasing LsL_s.

The left panel of Figure 5 displays the residual mass as a function of bare input quark mass for zero temperature ensembles with 243×48×1624^3 \times48 \times16 lattice and finite temperature ensembles with Ls=16L_s = 16 and 32 at β=4.0\beta= 4.0. The green dashed line represents the linear fit to the zero temperature data. The common method for defining a mass-independent mresm_{\mathrm{res}} involves an extrapolation to the zero input quark mass limit, which is determined to be 0.00613(9) for Ls=16L_s = 16 and 0.00325(3) for Ls=32L_s = 32. A 1/Ls1/L_s dependence dominates the contribution to mresm_{\mathrm{res}}. We find that the mresm_{\mathrm{res}} calculated from both zero temperature and finite temperature ensembles are consistent and nearly independent of the volume, see also [20].

Figure 5. Left: The residual mass as a function of bare input quark mass for zero temperature and finite temperature ensembles with different LsL_s at β=4.0\beta= 4.0. The dashed line denotes the linear fit to the zero temperature result. Right: chiral condensate as a function of quark mass for 243×12×Ls24^3 \times12 \times L_s lattices with Ls=16L_s = 16 and 32.

The right panel of Figure 5 shows the chiral condensate as a function of quark mass for 243×12×Ls24^3 \times12 \times L_s lattices with Ls=16L_s = 16 and 32. A negative result near the chiral limit is observed for 243×12×1624^3 \times12 \times16 lattices, attributed to the remaining UV divergence term C(x−1)mresa2C\frac{(x-1)m_{\mathrm{res}}}{a^2}, as previously mentioned, indicating C(x−1)<0C(x-1) < 0. An increase of the chiral condensate is observed when increasing LsL_s from 16 to 32 while keeping the total quark mass the same. This can be easily understood from ⟨ψˉψ⟩∣DWF∼C(x−1)mresa2+mq+mresa2+⟨ψˉψ⟩∣cont+…\langle\bar{\psi}\psi\rangle|_{\mathrm{DWF}} \sim C\frac{(x-1)m_{\mathrm{res}}}{a^2} + \frac{m_q+m_{\mathrm{res}}}{a^2} + \langle\bar{\psi}\psi\rangle|_{\mathrm{cont}} + \ldots, given that mresm_{\mathrm{res}} for Ls=16L_s = 16 is larger than for Ls=32L_s = 32, and C(x−1)<0C(x-1) < 0. If we do a simple extrapolation, we will see the ⟨ψˉψ⟩\langle\bar{\psi}\psi\rangle will have a smaller chiral symmetry breaking effect for Ls=32L_s = 32 compared to Ls=16L_s = 16 in the chiral limit, as expected.

Figure 6 shows the result of disconnected chiral susceptibility (left) and total chiral susceptibility (right) as functions of quark mass for two different LsL_s. We expect that the xmresxm_{\mathrm{res}} effect will not show up in the susceptibility as it is only constant as we change the quark mass. In fact, with only the proper quark mass shift, the results from different LsL_s appear consistent with each other. This is taken as evidence that we have a good control of the explicit chiral symmetry breaking already at smaller fifth size Ls=16L_s = 16, where the position of the susceptibility peak is in the negative input quark mass range.

Figure 6. The disconnected chiral susceptibility (left) and total chiral susceptibility (right) as a function of quark mass for 243×12×Ls24^3 \times12 \times L_s lattices with Ls=16L_s = 16 and 32.

Summary and Outlook

We carried out the study of Nf=3N_f = 3 QCD phase transition using Möbius domain wall fermions at a fixed lattice spacing of a=0.1361(20)a = 0.1361(20) fm on 363×12×1636^3 \times12 \times16 lattices, corresponding to a temperature of 121(2) MeV. We simulated various quark masses for this temperature. Through the analysis of the chiral condensate, chiral susceptibilities and Binder cumulant, comparing them with the results obtained on 243×12×1624^3 \times12 \times16 lattices in our previous work [1]. We find the transition mass point is around mqMS‾(2 GeV)∼4m_q^{\overline{\mathrm{MS}}}(2\ \mathrm{GeV}) \sim4 MeV and 3 MeV, as determined from the disconnected and total chiral susceptibility, respectively, at a temperature of 121(2) MeV and it is a crossover transition. Should there be a first-order region in the lower left corner of the Columbia plot, the critical quark mass would be smaller than 4 MeV. This is consistent with the findings using Wilson and staggered type fermions.

To reduce the residual chiral symmetry breaking effects, we conducted simulations on 243×12×3224^3 \times12 \times32 lattice. We found 1/Ls1/L_s dependence dominates the contribution to the residual mass. By investigating the residual chiral symmetry breaking effect on chiral condensate and chiral susceptibilities between Ls=16L_s = 16 and 32 lattices, we found that in the chiral limit the residual chiral symmetry breaking effect for chiral condensate is smaller for Ls=32L_s = 32 than for 16, as expected. The chiral susceptibilities results are consistent at the approximates same total quark mass between these two different LsL_s, which indicates we have a good control of the explicit chiral symmetry breaking already at smaller Ls=16L_s = 16.

For the crossover transition, the peak height of chiral susceptibilities will remain constant for larger volumes. However, we observed some volume dependence in the chiral susceptibilities for Ns3×12×16N_s^3 \times12 \times16 lattices between Ns=36N_s = 36 and 24, though not as substantial as one would expect from a true phase transition. Presently, we are conducting simulations on larger lattice of 483×12×1648^3 \times12 \times16. Additionally, to directly probe the first order region, if it exist, we are working toward even lower temperatures through simulations on Nt=14N_t = 14 lattices, corresponding to a temperature of 104(2) MeV.

Acknowledgments

This work used the computational resources of Supercomputer Fugaku provided by the RIKEN Center for Computational Science through HPCI project hp210032 and Usability Research ra000001 as well as Wisteria/BDEC-01 Supercomputer System at Tokyo University/JCAHPC through HPCI project hp220108 and Ito supercomputer at Kyushu University through HPCI project hp190124 and hp200050 and also the Hokusai BigWaterfall at RIKEN. This work is also supported in part by JSPS KAKENHI grant No 20H01907 and 21H01085. We acknowledge the Grid Lattice QCD framework1 and its extension for A64FX processors [13] which is used to generate the QCD configurations for this study. We thank N. Meyer and T. Wettig for discussions on the use of Grid for A64FX. For the measurement, we used Hadrons code [21].

References

  1. [1]Y. Zhang, Y. Aoki, S. Hashimoto, I. Kanamori, T. Kaneko and Y. Nakamura, Finite temperature QCD phase transition with 3 flavors of Mobius domain wall fermions, PoS LATTICE2022 (2023) 197 [2212.10021].arxiv.org/abs/2212.10021
  2. [2]R.D. Pisarski and F. Wilczek, Remarks on the chiral phase transition in chromodynamics, Phys. Rev. D 29 (1984) 338.DOI
  3. [3]G. Fejős, Second-order chiral phase transition in three-flavor quantum chromodynamics?, Phys. Rev. D 105 (2022) L071506.DOI
  4. [4]F. Karsch, E. Laermann and C. Schmidt, The chiral critical point in 3-flavour qcd, Physics Letters B 520 (2001) 41.
  5. [5]P. de Forcrand and O. Philipsen, The qcd phase diagram for three degenerate flavors and small baryon density, Nuclear Physics B 673 (2003) 170.DOI
  6. [6]Y. Iwasaki, K. Kanaya, S. Kaya, S. Sakai and T. Yoshié, Finite temperature transitions in lattice qcd with wilson quarks: Chiral transitions and the influence of the strange quark, Phys. Rev. D 54 (1996) 7010.DOI
  7. [7]X.-Y. Jin, Y. Kuramashi, Y. Nakamura, S. Takeda and A. Ukawa, Critical endpoint of the finite temperature phase transition for three flavor qcd, Phys. Rev. D 91 (2015) 014508.DOI
  8. [8]X.-Y. Jin, Y. Kuramashi, Y. Nakamura, S. Takeda and A. Ukawa, Critical point phase transition for finite temperature 3-flavor qcd with nonperturbatively O(a) improved wilson fermions at N_t = 10, Phys. Rev. D 96 (2017) 034523.DOI
  9. [9]A. Bazavov, H.-T. Ding, P. Hegde, F. Karsch, E. Laermann, S. Mukherjee et al., Chiral phase structure of three flavor qcd at vanishing baryon number density, Phys. Rev. D 95 (2017) 074505.DOI
  10. [10]L. Dini, P. Hegde, F. Karsch, A. Lahiri, C. Schmidt and S. Sharma, Chiral phase transition in three-flavor qcd from lattice qcd, Phys. Rev. D 105 (2022) 034510.DOI
  11. [11]F. Cuteri, O. Philipsen and A. Sciarra, On the order of the QCD chiral phase transition for different numbers of quark flavours, JHEP 11 (2021) 141 [2107.12739].DOI
  12. [12]Y. Nakamura, Y. Aoki, S. Hashimoto, I. Kanamori, T. Kaneko and Y. Zhang, Finite temperature phase transition for three flavor QCD with Möbius-domain wall fermions, PoS LATTICE2021 (2022) 080.DOI
  13. [13]N. Meyer, D. Pleiter, S. Solbrig and T. Wettig, Lattice QCD on upcoming Arm architectures, PoS LATTICE2018 (2019) 316 [1904.03927].arxiv.org/abs/1904.03927
  14. [14]S. Borsanyi et al., High-precision scale setting in lattice QCD, JHEP 09 (2012) 010 [1203.4469].DOI
  15. [15]S.R. Sharpe, Future of Chiral Extrapolations with Domain Wall Fermions, in Workshop on Domain Wall Fermions at Ten Years, 6, 2007 [0706.0218].arxiv.org/abs/0706.0218
  16. [16]JLQCD collaboration, Renormalization of domain-wall bilinear operators with short-distance current correlators, Phys. Rev. D 94 (2016) 054504 [1604.08702].
  17. [17]Y. Aoki, S. Aoki, H. Fukaya, S. Hashimoto, I. Kanamori, T. Kaneko et al., 2+1 flavor fine lattice simulation at finite temperature with domain-wall fermions, PoS LATTICE2021 (2022) 609 [2112.11771].arxiv.org/abs/2112.11771
  18. [18]K. Binder, Finite size scaling analysis of ising model block distribution functions, Zeitschrift für Physik B Condensed Matter 43 (1981) 119.
  19. [19]H.W.J. Blote, E. Luijten and J.R. Heringa, Ising universality in three dimensions: a monte carlo study, Journal of Physics A: Mathematical and General 28 (1995) 6289–6313.
  20. [20]C. Jung, R.G. Edwards, X.-D. Ji and V. Gadiyak, Residual chiral symmetry breaking in domain wall fermions, Phys. Rev. D 63 (2001) 054509 [hep-lat/0007033].
  21. [21]A. Portelli, N. Asmussen, P. Boyle, F. Erben, V. Gülpers, R. Hodgson et al., aportelli/hadrons: Hadrons v1.2, Nov., 2020. 10.5281/zenodo.4293902.

Paper details

vlnc:W_g7rtp55n
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents