betaFeedback

WorksMathematics

Moduli spaces of (3,6)(3,6)-K3K3 surfaces and cubic surfaces

Abstract

We compare the ball quotient for marked nodal cubic surfaces with the arithmetic quotient of a domain of type IV associated with K3K3 surfaces arising from configurations of six lines in P2\mathbb{P}^2. Using the Coble map and the period mapping associated with the hypergeometric system of type (3,6)(3,6), we identify a common open subset of the GIT quotient of six ordered points in P2\mathbb{P}^2 and the ball quotient. This identification gives an analog in dimension four of the Janus-like phenomenon for the Segre cubic and the Igusa quartic, making precise a comparison suggested by Allcock, Carlson, and Toledo. For a related family of lattice-polarized K3K3 surfaces, we give a geometric realization of the ring of meromorphic modular forms with prescribed poles and trivial character and describe the corresponding Looijenga compactification.

Introduction

Arithmetic quotients and period mappings

It is a central theme in algebraic geometry to understand the relation between GIT quotients and compactifications arising from Hodge theory. In favorable situations, a moduli space admits a projective model arising from invariant theory. On the other hand, it is often realized as an arithmetic quotient of a Hermitian symmetric domain via a period mapping. A basic problem is then to compare these two descriptions not only on the open moduli space, but also at the level of compactifications, discriminant divisors, and natural finite coverings. In this paper, we study modular varieties of type IV attached to certain lattice-polarized K3K3 surfaces of Picard rank 16, which are naturally associated with configurations of six lines in P2\mathbb{P}^{2} and the hypergeometric system of type (3,6)(3,6).

The moduli space of cubic surfaces provides a classical example of this relation. Besides its construction by invariant theory [10, 31], Allcock, Carlson, and Toledo showed that the moduli space of stable cubic surfaces admits a complex hyperbolic uniformization by a ball quotient of dimension four [2]. This description was subsequently related to periods of K3K3 surfaces by Dolgachev, van Geemen, and Kondō [11], while Allcock and Freitag used Borcherds products to construct automorphic forms reflecting the classical invariant theory of cubic surfaces [3]. Thus invariant theory, period mappings, and automorphic forms give complementary descriptions of the same moduli space.

A related period description arises from K3K3 surfaces obtained as the minimal resolutions of double coverings of the projective plane branched along six lines. Such a surface can be regarded as a natural generalization of an elliptic curve obtained as a double covering of P1\mathbb{P}^{1} branched at four points. Matsumoto, Sasaki, and Yoshida [28] studied this family through its periods and the associated Picard–Fuchs system. The periods are analogs of elliptic integrals, and their Picard–Fuchs system is the hypergeometric system of type (3,6)(3,6). The period domain for the family is the Hermitian symmetric domain DA1\mathcal{D}_{A_{1}} of type IV and dimension four. By virtue of the Torelli theorem and the surjectivity of the period mapping for K3K3 surfaces, the moduli space of these K3K3 surfaces is identified with the complement of a Heegner divisor in the arithmetic quotient DA1/ΓB1\mathcal{D}_{A_{1}/\Gamma_{B_{1}}}. Here, ΓB1\Gamma_{\mathrm{B}_1} is the arithmetic group determined by the lattice polarization; its action on DA1\mathcal{D}_{\mathrm{A}_1} is described in § 2.2. The Baily–Borel compactification of this quotient was studied in detail in [28]. For applications of these periods, see [Mat93, Yos08, MT12, HLTY20].

We thus obtain two arithmetic quotients of dimension four: the quotient of the complex ball associated with cubic surfaces and the quotient of a domain of type IV attached to the lattice-polarized K3K3 surfaces. Projective duality between configurations of six ordered points in P2\mathbb{P}^2 and six ordered lines in the dual plane (P2)∨(\mathbb{P}^2)^\vee relates these two descriptions through the configuration space X(3,6)X(3, 6). The aim of this paper is to make this relation precise by identifying the common open moduli space and the discriminant divisors that must be removed on the two sides, as suggested in [2]. We describe this common open subset inside the GIT quotient of six ordered points in P2\mathbb{P}^2 directly.

The family F1\mathcal{F}_1 of K3K3 surfaces

The family of K3K3 surfaces studied in [28] is characterized by the even lattice B1\mathrm{B}_1 of (11). In this paper, we study the family F1\mathcal{F}_1 of K3K3 surfaces characterized by the lattice A1\mathrm{A}_1 of (10). These surfaces are the van Geemen–Sarti partners, in the sense of [7], of the K3K3 surfaces studied in [28]. The relation between the lattices B1\mathrm{B}_1 and A1\mathrm{A}_1 allows us to study the moduli space of the former family through the family F1\mathcal{F}_1. In order to study smooth cubic surfaces using the periods of these K3K3 surfaces, as in § 1.1, we must exclude configurations of six lines that are all tangent to a common conic in P2\mathbb{P}^2. The explicit equation for the family F1\mathcal{F}_1 relates this condition to divisors defined by hyperplane arrangements in the period domain. We use Looijenga’s compactification to study modular forms with poles along the relevant arrangement; see § 4.

Looijenga compactification

For arithmetic quotients equipped with hyperplane arrangements, Looijenga constructed natural compactifications interpolating between the Baily–Borel and toroidal compactifications [24, 25]. This construction has been applied to the realization of GIT quotients as arrangement compactifications [4, 5, 15, 20]. See also the subsequent developments in relation to the Hassett–Keel–Looijenga program [21, 22 LO21].

A fundamental feature of this construction is that the resulting compactification is closely related to the projective spectrum of a graded ring of automorphic forms allowed to have poles along the appropriate arrangement divisor [25]. For a conceptual overview, see [26]. For the lattice A1\mathrm{A}_1, Nagano and Ueda [33] (resp. Wang and Williams [WW24]) determine the ring of holomorphic modular forms with characters (resp. meromorphic modular forms with trivial character and prescribed poles). We give a geometric realization of the generators of the latter ring as coefficients of a Weierstrass equation and study the corresponding forms with characters.

Overview of the results

We prove three main results, stated in § 2. First, for the arrangement complement attached to the K3K3 surfaces of the family F1\mathcal{F}_1, we give a geometric realization of the graded ring of meromorphic modular forms with trivial character and identify the resulting Looijenga compactification with P(2,4,6,8,10)\mathbb{P}(2, 4, 6, 8, 10). The discriminant decomposes into two geometrically distinguished components. We determine the full graded ring by adjoining modular forms with characters that define the corresponding double coverings.

Second, we compare these orthogonal modular varieties with the complex hyperbolic and GIT quotients associated with cubic surfaces. We identify a common open subset of the GIT quotient of six ordered points in P2\mathbb{P}^2 and the ball quotient parametrizing marked nodal cubic surfaces. The collinearity strata in this open subset are precisely those whose associated roots in the root lattice of type E6E_6 are mutually orthogonal.

Third, starting from the description of the orbifold Picard group by Nagano and Ueda [33], we interpret three natural double coverings of P(2,3,4,5,6)\mathbb{P}(2, 3, 4, 5, 6) in terms of modular forms with characters. Their branch divisors correspond to the locus of U⊕E8(−1)⊕E7(−1)U \oplus E_8(-1) \oplus E_7(-1)-polarized K3K3 surfaces, a jump of the Néron–Severi lattice caused by the coalescence of two nodal fibers, and the symmetry exchanging the two A1(−1)A_1(-1) summands. We also describe these coverings in terms of quotients of the Coble fourfold and permutations of its coordinates.

Main results

Meromorphic modular forms for a family of lattice-polarized K3 surfaces

Let A1A_1 be an even lattice of signature (2,4)(2,4) with the intersection matrix U⊕U⊕A1(−1)⊕A1(−1)U \oplus U \oplus A_1(-1) \oplus A_1(-1), where UU is the hyperbolic lattice of rank two and A1(−1)A_1(-1) is the root lattice. Let DA1D_{A_1} be a connected component of {[ξ]∈P(A1⊗C)∣(ξ,ξ)=0,(ξ,ξˉ)>0}\{[\xi] \in\mathbb{P}(A_1 \otimes\mathbb{C}) \mid(\xi,\xi) = 0, (\xi,\bar{\xi}) > 0\}. Let O+(A1)O^+(A_1) be the subgroup of O(A1)O(A_1) preserving the connected component DA1D_{A_1}. Let ΓA1\Gamma_{A_1} be the intersection of O+(A1)O^+(A_1) and the stable orthogonal subgroup of A1A_1. Let H∞\mathcal{H}_\infty and H0\mathcal{H}_0 be the ΓA1\Gamma_{A_1}-orbits of linear hyperplanes orthogonal to the two summands isometric to A1(−1)A_1(-1). Let H∞H_\infty and H0H_0 be their respective supports in DA1D_{A_1} (for details, see Definition 2.7).

In § 4, we will determine the structure of the ring A∘(ΓA1)H∞\mathcal{A}^{\circ}(\Gamma_{A_1})_{H_\infty} of meromorphic modular forms, including all characters, with respect to ΓA1\Gamma_{A_1} with poles along the divisor H∞H_\infty. The following is our first main theorem.

Theorem 2.1. The ring A∘(ΓA1)H∞\mathcal{A}^{\circ}(\Gamma_{A_1})_{H_\infty} is isomorphic to

C[r2,r4,r6,r8,r10,r~4,r~30]/(r~42−r8,r~302−d60(r)).\mathbb{C}[r_2,r_4,r_6,r_8,r_{10},\widetilde{r}_4,\widetilde{r}_{30}]/(\widetilde{r}_4^2-r_8,\widetilde{r}_{30}^2-d_{60}(r)).

Here, rkr_k for k∈{2,4,6,8,10}k \in\{2,4,6,8,10\} are modular forms of weight kk with trivial character and d60(r)∈C[r2,r4,r6,r8,r10]d_{60}(r) \in\mathbb{C}[r_2,r_4,r_6,r_8,r_{10}]. Also, r~4\widetilde{r}_4 (resp. r~30\widetilde{r}_{30}) is a modular form of weight 44 (resp. 3030) with a nontrivial character. The polynomial d60(r)d_{60}(r) is defined by the discriminant factorization in Definition A.1, and Proposition A.3 gives its resultant formula.

We briefly summarize here how we obtain the theorem. We remark that the lattice A1A_1 is a primitive sublattice of the K3K3 lattice LK3L_{K3}, which is the even unimodular lattice of signature (3,19)(3,19). Let M1M_1 be the orthogonal complement of A1A_1 with respect to the unimodular lattice LK3L_{K3}. Then, M1M_1 is a primitive sublattice of LK3L_{K3} with signature (1,15)(1,15) and we can study K3K3 surfaces polarized by the lattice M1M_1. Unless otherwise stated, an M1M_1-polarized K3K3 surface in this paper means a pseudo-ample M1M_1-polarized K3K3 surface in the sense recalled in § 4. We will obtain the family F1\mathcal{F}_1 of isomorphism classes of M1M_1-polarized K3K3 surfaces explicitly. A member of F1\mathcal{F}_1 can be characterized as the quotient of a well-known K3K3 surface, which was studied in [28] and arises from the minimal resolution of the double covering of P2\mathbb{P}^2 branched along six lines, by a symplectic involution. Meanwhile, the moduli space of M1M_1-polarized K3K3 surfaces is identified with the arithmetic quotient DA1/ΓA1D_{A_1}/\Gamma_{A_1} by virtue of the Torelli theorem and the surjectivity of the period mapping for K3K3 surfaces. The generators of the ring A∘(ΓA1)H∞\mathcal{A}^{\circ}(\Gamma_{A_1})_{H_\infty} will appear as the deformation parameters for the family F1\mathcal{F}_1. They are regarded as modular forms on DA1D_{A_1} via the period mapping.

References

  1. [1][AOU24] T. Abdelgadir, S. Okawa and K. Ueda, Compact moduli of marked noncommutative cubic surfaces, arXiv:2404.00175.arxiv.org/abs/2404.00175
  2. [2][ACT02] D. Allcock, J. A. Carlson and D. Toledo, The complex hyperbolic geometry of the moduli space of cubic surfaces, J. Algebraic Geom. 11, No. 4, 659–724 (2002).
  3. [3][AF02] D. Allcock and E. Freitag, Cubic surfaces and Borcherds products, Comment. Math. Helv. 77, No. 2, 270–296 (2002).
  4. [4][CMJL12] S. Casalaina-Martin, D. Jensen and R. Laza, The geometry of the ball quotient model of the moduli space of genus four curves, in Compact Moduli Spaces and Vector Bundles, Contemp. Math. 564, Amer. Math. Soc., Providence, RI, 107–136 (2012).
  5. [5][CMJL14] S. Casalaina-Martin, D. Jensen and R. Laza, Log canonical models and variation of GIT for genus 4 canonical curves, J. Algebraic Geom. 23, No. 4, 727–764 (2014).
  6. [6][CD12] A. Clingher and C. F. Doran, Lattice polarized K3 surfaces and Siegel modular forms, Adv. Math. 231, No. 1, 172–212 (2012).arxiv.org/abs/1004.3503
  7. [7][CMS19] A. Clingher, A. Malmendier and T. Shaska, Six line configurations and string dualities, Commun. Math. Phys. 371, No. 1, 159–196 (2019).DOI
  8. [8][Dem80] M. Demazure, Surfaces de Del Pezzo V: Modèles anticanoniques, in Séminaire sur les singularités des surfaces, Lecture Notes in Math. 777, Springer, Berlin, 61–69 (1980).DOI
  9. [9][Dol96] I. Dolgachev, Mirror symmetry for lattice-polarized K3 surfaces, J. Math. Sci. 81, No. 3, 2599–2630 (1996).arxiv.org/abs/alg-geom/9502005
  10. [10][DO88] I. Dolgachev and D. Orland, Point sets in projective spaces and theta functions, Astérisque 165, Soc. Math. France (1988).
  11. [11][DvGK05] I. Dolgachev, B. van Geemen and S. Kondō, A complex ball uniformization of the moduli space of cubic surfaces via periods of K3 surfaces, J. Reine Angew. Math. 588, 99–148 (2005).DOI
  12. [12][GKS21] P. Gallardo, M. Kerr, and L. Schaffler, Geometric interpretation of toroidal compactifications of moduli of points in the line and cubic surfaces, Adv. Math. 381, Paper No. 107632 (2021).arxiv.org/abs/2006.01314
  13. [13][GHS09] V. Gritsenko, K. Hulek and G. K. Sankaran, Abelianisation of orthogonal groups and the fundamental group of modular varieties, J. Algebra 322, No. 2, 463–478 (2009).arxiv.org/abs/0810.1614
  14. [14][HU22] K. Hashimoto and K. Ueda, The ring of modular forms for the even unimodular lattice of signature (2, 10), Proc. Amer. Math. Soc. 150, No. 2, 547–558 (2022).arxiv.org/abs/1406.0332
  15. [15][HL02] G. Heckman and E. Looijenga, The moduli space of rational elliptic surfaces, in Algebraic Geometry 2000, Azumino (Hotaka, 2000), Adv. Stud. Pure Math. 36, Math. Soc. Japan, Tokyo, 185–248 (2002).
  16. [17][Hun96] B. Hunt, The geometry of some special arithmetic quotients, Lecture Notes in Math. 1637, Springer, Berlin (1996).DOI
  17. [18][HW94] B. Hunt and S. H. Weintraub, Janus-like algebraic varieties, J. Differ. Geom. 39, No. 3, 509–557 (1994).
  18. [19]S. Kondō, The Segre cubic and Borcherds products, in Arithmetic and Geometry of K3 Surfaces and Calabi–Yau Threefolds, Fields Inst. Commun. 67, 549–565 (2013).arxiv.org/abs/1110.1126
  19. [20]R. Laza, The moduli space of cubic fourfolds via the period map, Ann. of Math. (2) 172, No. 1, 673–711 (2010).arxiv.org/abs/0705.0949
  20. [21]R. Laza and K. G. O’Grady, GIT versus Baily–Borel compactification for quartic K3 surfaces, in Geometry of Moduli, Abel Symp. 14, Springer, Cham, 217–283 (2018).arxiv.org/abs/1612.07432
  21. [22]R. Laza and K. G. O’Grady, Birational geometry of the moduli space of quartic K3 surfaces, Compos. Math. 155, No. 9, 1655–1710 (2019).DOI
  22. [24]E. Looijenga, Compactifications defined by arrangements. I. The ball quotient case, Duke Math. J. 118, No. 1, 151–187 (2003).DOI
  23. [25]E. Looijenga, Compactifications defined by arrangements. II: Locally symmetric varieties of type IV, Duke Math. J. 119, No. 3, 527–588 (2003).DOI
  24. [26]E. Looijenga, Moduli spaces and locally symmetric varieties, in Development of Moduli Theory—Kyoto 2013, Adv. Stud. Pure Math. 69, 33–75 (2016).
  25. [28]K. Matsumoto, T. Sasaki and M. Yoshida, The monodromy of the period map of a 4-parameter family of K3 surfaces and the hypergeometric function of type (3, 6), Internat. J. Math. 3, 1–164 (1992).DOI
  26. [30]D. R. Morrison, On K3 surfaces with large Picard number, Invent. Math. 75, 105–121 (1984).DOI
  27. [31]S. Mukai, An Introduction to Invariants and Moduli, Cambridge Stud. Adv. Math. 81, Cambridge Univ. Press, Cambridge (2003).DOI
  28. [32]D. Mumford, J. Fogarty and F. Kirwan, Geometric Invariant Theory, 3rd ed., Springer-Verlag, Berlin (1994).
  29. [33]A. Nagano and K. Ueda, The ring of modular forms of O(2, 4; Z) with characters, Hokkaido Math. J. 51, No. 2, 275–286 (2022).arxiv.org/abs/2005.00231
  30. [34]I. Naruki, Cross ratio variety as a moduli space of cubic surfaces, Proc. London Math. Soc. (3) 45, No. 1, 1–30 (1982).DOI
  31. [35]A. Nagano, Inverse period mappings of K3 surfaces and a construction of modular forms for a lattice with the Kneser conditions, J. Algebra 565, 33–63 (2021).DOI
  32. [36]V. V. Nikulin, Integral symmetric bilinear forms and some of their applications, Math. USSR-Izv. 14, 103–167 (1980).DOI
  33. [37]G. Ottaviani, Five lectures on projective invariants, Rend. Semin. Mat. Univ. Politec. Torino 71, No. 1, 119–194 (2013).arxiv.org/abs/1305.2749
  34. [38]B. van Geemen, A linear system on Naruki’s moduli space of marked cubic surfaces, Internat. J. Math. 13, No. 2, 183–208 (2002).

Paper details

vlnc:W_g8jmucdu
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Mathematics

AI

View statement
Looking for related papers…
Contents