betaFeedback

WorksPhysics and Astronomy

Noncommutative Kazakov-Solodukhin Gravastar

Abstract

We construct a thin-shell gravastar with a de Sitter interior and a phenomenological exterior combining a Lorentzian noncommutative-inspired mass distribution with the unexpanded Kazakov–Solodukhin deformation. Within an effective Einstein description, we derive the surface stresses, evaluate the shell energy conditions, and compute transparent-shell geodesics using a single exterior metric. The associated horizon-bearing family satisfies a radial-pressure thermodynamic identity with area entropy. For the gravastar, the first three penetrating visibility boundaries move inward with increasing KS scale, while the exterior photon orbit and critical impact parameter move outward. A finite-observer backlighting calculation reproduces the Schwarzschild–de Sitter benchmark and tracks the merger of visibility boundaries as the shell moves beyond the photon orbit. We also compute the redshift-weighted intensity of a face-on, optically thin emitting layer. Additional disk crossings after core transmission produce inner image structure whose brightness depends on the radial emission profile. At leading inverse-radius order, both deformation scales enter through one coefficient, producing an exact geometric parameter degeneracy. We show that the next inverse-radius term breaks this degeneracy: the critical impact parameter and logarithmic strong-deflection coefficient provide independent local information about the two scales. Full-metric calculations for equal-leading-coefficient parameter pairs resolve this splitting and quantify the accuracy of the higher-order expansion.

Introduction

Compact objects with a regular interior provide a way to examine which strong-field signatures depend on an event horizon and which follow from the exterior gravitational field. Horizon-scale images [1, 2] and gravitational-wave observations [3] motivate this distinction. A gravastar replaces the central black-hole region by a de Sitter core supported by an intervening matter layer [4, 5]. In the thin-shell description, the Israel junction conditions determine the surface density and pressure from the geometries on either side of the shell [6, 7, 8].

The shell properties, perturbative response and optical appearance probe different aspects of this construction. Energy conditions constrain the surface stresses and compactness [9]; nonradial oscillations and inspiral signals depend on the dynamical response [10, 11]; tidal deformability probes the response to an external field [12]. For a transparent object, light can cross the shell, turn inside the core and return to the observer. Illumination by a background optical plane then produces a central bright core and alternating bright and dark rings [13, 14]. Accretion disks and orbiting hot spots give complementary images with their own source dependence [15]. For an optically thin emitting disk, the image follows from the radii of successive disk crossings and their redshift-weighted intensities [16]. Additional returning branches modify these images in horizonless geometries [17].

Two prescriptions introduce short-distance scales into the exterior geometry considered here. A noncommutative-inspired distribution replaces a point source by an extended density, as in the Gaussian Schwarzschild model [18]. We use a Lorentzian profile, whose integrated mass approaches the ADM mass at spatial infinity [19]. Gravastars built from smeared sources have been studied in four and three dimensions [20, 21, 22], including BTZ models [23, 24]. The noncommutative BTZ gravastar construction was subsequently extended to include Gauss–Bonnet corrections, with an analysis of the shell energy conditions and thermodynamic properties [25].

The optical appearance of the four-dimensional Lorentzian model was examined in Ref. [26]. Related investigations have addressed quasinormal modes, absorption, scattering, and shadows in noncommutative black-hole geometries [32, 33]. Geodesic motion, gravitational lensing, and accretion-disk images have also been examined in modified black-hole spacetimes [34].

The Kazakov–Solodukhin (KS) deformation originates in an effective two-dimensional dilaton treatment of spherically symmetric gravity [27]. Its additional length scale changes the exterior photon orbits, scattering and quasinormal spectrum [28], as well as the lensing rings and images of accretion disks [29, 30]. For the unexpanded KS metric, the Hawking temperature at fixed ADM mass equals the Schwarzschild value, even though the horizon radius changes [31]. This distinction between fixed mass and fixed horizon radius is relevant when comparing deformed families of compact objects. Thermodynamic corrections associated with noncommutative geometry and the generalized uncertainty principle have also been investigated in Schwarzschild and BTZ geometries [35, 36].

We combine the Lorentzian mass profile and the unexpanded KS factor in a phenomenological exterior, interpreted through the Einstein equations with an effective anisotropic source. This choice supplies a common framework for the bulk stress tensor, the shell junction conditions and the area entropy of the associated horizon-bearing family. A de Sitter core replaces the inner region, and the primary shell family lies in a globally static exterior below the unstable photon orbit. Our primary numerical predictions use the unexpanded metric, with truncated metrics providing controlled comparisons. We reproduce the Schwarzschild–de Sitter backlighting benchmark of Ref. [13], retain a finite observer distance, and follow the ring mergers when the shell radius extends beyond the exterior photon orbit. We then compute disk transfer functions and color intensity maps for two explicit emission profiles. Comparing the same disk around the gravastar and its associated black hole isolates the light received after transmission through the core.

The principal question is whether the two deformation scales can be separated by the optical observables. Their leading contributions enter the metric through a single inverse-square coefficient. We show that this produces an exact parameter degeneracy in the leading exterior model, including its shell stresses and transparent-shell images. The next inverse-radius term supplies independent information: the critical impact parameter and the logarithmic strong-deflection coefficient respond differently to it. We derive this response and resolve the splitting numerically for two parameter pairs with the same leading coefficient. The strong-deflection analysis uses the exterior formalism of Ref. [37] and the established inner-image coefficient for ultracompact objects [38].

Section II defines the exterior and its effective source. Section III derives the horizon thermodynamic identities. Section IV constructs the shell and tests its energy conditions. Section V develops the transparent-shell ray tracing. Section VI constructs the disk transfer functions and observed intensities, and Sec. VII examines the higher-order separation of the deformation scales. Section VIII gives the conclusions.

Exterior geometry and effective source

We use signature (−,+,+,+)(-,+,+,+) and G=c=1G=c=1. The exterior line element is

ds+2=−F(r)dt+2+dr2F(r)+r2dΩ2,(1)ds_{+}^{2}=-F(r)dt_{+}^{2}+\frac{dr^{2}}{F(r)}+r^{2}d\Omega^{2}, \tag*{(1)}

where rr is the areal radius and dΩ2=dϑ2+sin⁡2ϑdφ2d\Omega^{2}=d\vartheta^{2}+\sin^{2}\vartheta d\varphi^{2}. The Lorentzian density and its integrated mass are

ρθ(r)=Mθπ3/2(r2+πθ)2,(2)\rho_{\theta}(r)=\frac{M\sqrt{\theta}}{\pi^{3/2}(r^{2}+\pi\theta)^{2}}, \tag*{(2)}
Mθ(r)=4π∫0rρθ(u)u2du=Mμ(r),(3)\mathcal{M}_{\theta}(r)=4\pi\int_{0}^{r}\rho_{\theta}(u)u^{2}du=M\mu(r), \tag*{(3)}
μ(r)=2π[arctan⁡rw−rwr2+w2],w=πθ.(4)\mu(r)=\frac{2}{\pi}\left[\arctan\frac{r}{w}-\frac{rw}{r^{2}+w^{2}}\right],\qquad w=\sqrt{\pi\theta}. \tag*{(4)}

Thus μ(∞)=1\mu(\infty)=1 and MM is the ADM mass. At θ=0\theta=0 we use the continuous limit μ(r)=1\mu(r)=1 for r>0r>0.

Our exterior prescription is

F(r)=1−η2r2−2Mμ(r)r,r>η,(5)F(r)=\sqrt{1-\frac{\eta^{2}}{r^{2}}}-\frac{2M\mu(r)}{r},\qquad r>\eta, \tag*{(5)}

with M>0M>0, θ≥0\theta\geq0 and η≥0\eta\geq0. The parameters θ\sqrt{\theta} and η\eta have dimensions of length. The limits θ=0\theta=0, η=0\eta=0 and θ=η=0\theta=\eta=0 give the unexpanded KS, Lorentzian noncommutative-inspired and Schwarzschild exteriors, respectively.

We adopt an Einstein–Hilbert gravitational sector with a minimally coupled effective source and represent the deformation by the stress tensor Tμνeff=Gμν/(8π)T_{\mu\nu}^{\mathrm{eff}}=G_{\mu\nu}/(8\pi). Defining

g(r)=1−η2r2,meff(r)=Mμ(r)+r2[1−g(r)],(6)g(r)=\sqrt{1-\frac{\eta^{2}}{r^{2}}},\qquad m_{\mathrm{eff}}(r)=M\mu(r)+\frac{r}{2}[1-g(r)], \tag*{(6)}

so that F=1−2meff/rF=1-2m_{\mathrm{eff}}/r, the source components are

ρeff=meff′4πr2=ρθ+1−g−18πr2,\rho_{\mathrm{eff}}=\frac{m_{\mathrm{eff}}'}{4\pi r^{2}}=\rho_{\theta}+\frac{1-g^{-1}}{8\pi r^{2}},
pr=−ρeff,pt=−meff′′8π.(7)p_{r}=-\rho_{\mathrm{eff}},\qquad p_{t}=-\frac{m_{\mathrm{eff}}''}{8\pi}. \tag*{(7)}

The KS term therefore contributes to the total anisotropic source in addition to the Lorentzian density. This effective description fixes the gravitational junction conditions and the entropy convention used below. The gravastar replaces the region below its shell by a regular de Sitter core.

For analytic comparisons, introduce

s=θ/π,e=η2,q=8Ms−e2.(8)s=\sqrt{\theta/\pi},\qquad e=\eta^{2},\qquad q=8Ms-\frac{e}{2}. \tag*{(8)}

Expansion of Eq. (5) gives

F(r)=1−2Mr+qr2+Dr4+Er6+O(r−8),(9)F(r)=1-\frac{2M}{r}+\frac{q}{r^{2}}+\frac{D}{r^{4}}+\frac{E}{r^{6}}+O(r^{-8}), \tag*{(9)}
D=−16π2Ms33−e28,E=24π4Ms55−e316.(10)D=-\frac{16\pi^{2}Ms^{3}}{3}-\frac{e^{2}}{8},\qquad E=\frac{24\pi^{4}Ms^{5}}{5}-\frac{e^{3}}{16}. \tag*{(10)}

The respective dimensions of qq, DD, EE are L2L^2, L4L^4, L6L^6. The expansion is controlled by πs/r≪1\pi s/r \ll1 and e/r≪1\sqrt{e}/r \ll1. Its leading form,

Fq(r)=1−2Mr+qr2,(11)F_q(r)=1-\frac{2M}{r}+\frac{q}{r^2}, \tag*{(11)}

contains the two microscopic scales only through qq. We use Eq. (11) for explicit analytic limits and Eq. (5) for the primary numerical predictions. The higher-order analysis also evaluates truncated metrics to quantify their accuracy against the full exterior.

Thermodynamics of the associated horizon family

We consider the horizon-bearing family associated with the same exterior metric used in the gravastar construction. Throughout this section G=c=ℏ=kB=1G=c=\hbar=k_B=1, and the dimensional parameters θ\theta and η\eta are held fixed as the ADM mass varies. We denote the outer horizon radius by RR. The functions g(r)g(r) and μ(r)\mu(r) are those in Eqs. (6) and (4), so that F(r)=g(r)−2Mμ(r)/rF(r)=g(r)-2M\mu(r)/r. The physical branch has R>ηR>\eta, F(R)=0F(R)=0 and F(r)>0F(r)>0 for all r>Rr>R.

Horizon mass and temperature

The horizon equation determines the mass as

M(R)=Rg(R)2μ(R).(12)M(R)=\frac{Rg(R)}{2\mu(R)}. \tag*{(12)}

The temperature follows from the surface gravity, with the radial derivative of FF evaluated at fixed MM, θ\theta, η\eta:

TH=14π∂F∂r∣r=R=14π[g′(R)+g(R)R−g(R)μ′(R)μ(R)].(13)T_H=\left.\frac{1}{4\pi}\frac{\partial F}{\partial r}\right|_{r=R} =\frac{1}{4\pi}\left[g'(R)+\frac{g(R)}{R}-g(R)\frac{\mu'(R)}{\mu(R)}\right]. \tag*{(13)}

The derivatives required in this expression are

g′(r)=η2r3g(r),μ′(r)=4wr2π(r2+w2)2,w=πθ.(14)g'(r)=\frac{\eta^2}{r^3g(r)},\qquad\mu'(r)=\frac{4wr^2}{\pi(r^2+w^2)^2},\qquad w=\sqrt{\pi\theta}. \tag*{(14)}

Equations (12) and (13) retain the full Lorentzian profile and the unexpanded KS factor.

For comparison with the large-radius approximation, let k=4θ/πk=4\sqrt{\theta/\pi}. The inverse-square lapse gives

Mtr(R)=R2−η2/22(R−k),M_{\rm tr}(R)=\frac{R^2-\eta^2/2}{2(R-k)},
Ttr(R)=R2−2kR+η2/24πR2(R−k).(15)T_{\rm tr}(R)=\frac{R^2-2kR+\eta^2/2}{4\pi R^2(R-k)}. \tag*{(15)}

To first order in k/Rk/R and η2/R2\eta^2/R^2,

TH(R)=14πR[1−kR+η22R2+O(k2R2,kη2R3,η4R4)].(16)T_H(R)=\frac{1}{4\pi R}\left[1-\frac{k}{R}+\frac{\eta^2}{2R^2}+O\left(\frac{k^2}{R^2},\frac{k\eta^2}{R^3},\frac{\eta^4}{R^4}\right)\right]. \tag*{(16)}

At fixed ADM mass the horizon displacement R=2M−k+η2/(4M)+⋯R=2M-k+\eta^2/(4M)+\cdots cancels the individual first-order corrections in the temperature. The pure KS limit provides an exact check:

R=4M2+η2,TH=18πM(θ=0).(17)R=\sqrt{4M^2+\eta^2},\qquad T_H=\frac{1}{8\pi M}\qquad(\theta=0). \tag*{(17)}

This fixed-mass result agrees with the KS analysis of Ref. [31].

Area entropy and heat response

With an Einstein–Hilbert gravitational sector and an effective source without explicit curvature couplings, the Wald entropy reduces to the area law [39],

SA=AH4=πR2.(18)S_A=\frac{A_H}{4}=\pi R^2. \tag*{(18)}

The radial Einstein equation gives a local thermodynamic identity [40]. With EH=R/2E_H=R/2, VH=4πR3/3V_H=4\pi R^3/3 and the radial pressure at the horizon

PH=R∂rF(R)−18πR2,(19)P_H=\frac{R\partial_rF(R)-1}{8\pi R^2}, \tag*{(19)}

one obtains

dEH=TH dSA−PH dVH.(20)dE_H=T_H\,dS_A-P_H\,dV_H. \tag*{(20)}

Differentiating the horizon equation along the fixed-θ\theta, η\eta family also yields

μ(R)dMdR=2πRTH,μ(R) dM=TH dSA.(21)\mu(R)\frac{dM}{dR}=2\pi R T_H,\qquad\mu(R)\,dM=T_H\,dS_A. \tag*{(21)}

The factor μ(R)\mu(R) tracks the variation of the distributed source as the ADM mass changes. Source-dependent factors of this type arise when thermodynamic variations are restricted to prescribed metric families [41, 42]. Here the entropy and pressure work are fixed by Eqs. (18)–(20), while Eq. (21) specifies their relation to the ADM-mass parametrization. The deformation dependence of SAS_A at fixed mass enters through the solution R(M,θ,η)R(M,\theta,\eta) of the horizon equation.

We characterize the fixed-deformation horizon family by the entropy heat response and the ADM-mass slope,

CA=THdSAdTH=2πRTHTH′(R),CM=dMdTH=CAμ(R).(22)C_A=T_H\frac{dS_A}{dT_H}=\frac{2\pi R T_H}{T_H'(R)},\qquad C_M=\frac{dM}{dT_H}=\frac{C_A}{\mu(R)}. \tag*{(22)}

The derivatives are taken along M(R)M(R) at fixed dimensional θ,η\theta,\eta. Both quantities reduce to −2πR2-2\pi R^2 in the Schwarzschild limit. For the unexpanded pure KS geometry,

CA=CM=−2π(R2−η2)=−8πM2.(23)C_A=C_M=-2\pi(R^2-\eta^2)=-8\pi M^2. \tag*{(23)}

Figure 1 uses 3≤R/ℓ≤103\le R/\ell\le10. The bound μ(r)−rμ′(r)≥1−8w/(πr)>0\mu(r)-r\mu'(r)\ge1-8w/(\pi r)>0 throughout the retained exterior ensures that M(r)M(r) increases for r≥Rr\ge R and that each plotted root is the outer horizon. On these branches the temperature decreases monotonically and CA<0C_A < 0. Increasing the smearing scale lowers THT_H at fixed RR and increases the magnitude of the normalized heat response. Both quantities approach their Schwarzschild behavior as the horizon radius grows relative to the deformation scales.

Figure 1. Thermodynamic quantities computed from the full exterior. A fixed reference length ℓ∗\ell_* is used to compare horizon families with θ/ℓ∗2=0.03,0.06,0.09\theta/\ell_*^2 = 0.03, 0.06, 0.09 and η/ℓ∗=0.09\eta/\ell_* = 0.09: (a) Hawking temperature and (b) the normalized entropy heat response. The dotted reference is Schwarzschild. Every displayed point belongs to an outer-horizon branch; the dimensional deformation parameters remain fixed along each curve as M(R)M(R) varies.

Thin-shell construction and matter content

We join the exterior geometry of Sec. II to a de Sitter interior across a timelike spherical shell. The two metrics are

ds±2=−F±(r±)dt±2+dr2F±(r±)+r±2dΩ±2,(24)ds_\pm^2 = -F_\pm(r_\pm)dt_\pm^2 + \frac{dr^2}{F_\pm(r_\pm)} + r_\pm^2d\Omega_\pm^2, \tag*{(24)}

where F+=FF_+ = F is the unexpanded exterior lapse and

F−(r)=1−H2r2,H2=ΛdS3>0,α=H−1.(25)F_-(r) = 1 - H^2r^2,\qquad H^2 = \frac{\Lambda_{\mathrm{dS}}}{3} > 0,\qquad\alpha= H^{-1}. \tag*{(25)}

Thus α2=3/ΛdS\alpha^2 = 3/\Lambda_{\mathrm{dS}}. The interior vacuum has ρ−=3H2/(8π)\rho_- = 3H^2/(8\pi) and p−=−ρ−p_- = -\rho_-. We use the Einstein–Israel junction conditions with the effective exterior source specified by the metric [6, 7, 43].

Dynamical junction conditions

Let r±=a(τ)r_\pm= a(\tau) describe the shell, with proper time τ\tau and induced metric

dsΣ2=−dτ2+a(τ)2dΩ2.(26)ds_\Sigma^2 = -d\tau^2 + a(\tau)^2d\Omega^2. \tag*{(26)}

Define β±=F±(a)+a˙2\beta_\pm= \sqrt{F_\pm(a) + \dot{a}^2} and orient the common normal from the interior toward increasing areal radius. The shell four-velocity and normal are

U±μ=(β±F±,a˙,0,0),n±μ=(a˙F±,β±,0,0),(27)U_\pm^\mu= \left(\frac{\beta_\pm}{F_\pm},\dot{a},0,0\right),\qquad n_\pm^\mu= \left(\frac{\dot{a}}{F_\pm},\beta_\pm,0,0\right), \tag*{(27)}

which satisfy UμUμ=−1U^\mu U_\mu= -1, nμnμ=1n^\mu n_\mu= 1, and Uμnμ=0U^\mu n_\mu= 0. With a prime denoting an areal-radius derivative, the independent extrinsic-curvature components are

Kϑϑ±=β±a,Kττ±=a¨+F±′(a)/2β±.(28)K^\vartheta{}_{\vartheta\pm} = \frac{\beta_\pm}{a},\qquad K^\tau{}_{\tau\pm} = \frac{\ddot{a}+F'_\pm(a)/2}{\beta_\pm}. \tag*{(28)}

For the jump κij=Kij+−Kij−\kappa^i{}_j = K^i{}_{j+}-K^i{}_{j-}, the surface stress tensor Sij=diag⁡(−σ,P,P)S^i{}_j = \operatorname{diag}(-\sigma,\mathcal{P},\mathcal{P}) obeys

Sij=−18π(κij−δijκkk).(29)S^i{}_j = -\frac{1}{8\pi}\left(\kappa^i{}_j-\delta^i{}_j\kappa^k{}_k\right). \tag*{(29)}

It follows that

σ=β−−β+4πa,(30)\sigma= \frac{\beta_- - \beta_+}{4\pi a}, \tag*{(30)}
P=18πa[F++a˙2+aa¨+aF+′/2β+−F−+a˙2+aa¨+aF−′/2β−].(31)\mathcal{P} = \frac{1}{8\pi a}\left[\frac{F_+ + \dot{a}^2 + a\ddot{a} + aF'_+/2}{\beta_+} - \frac{F_- + \dot{a}^2 + a\ddot{a} + aF'_-/2}{\beta_-}\right]. \tag*{(31)}

The combination entering the strong energy condition is

σ+2P=14π[a¨+F+′/2β+−a¨−H2aβ−].(32)\sigma+ 2\mathcal{P} = \frac{1}{4\pi}\left[\frac{\ddot{a}+F'_+/2}{\beta_+} - \frac{\ddot{a}-H^2a}{\beta_-}\right]. \tag*{(32)}

Both bulk geometries satisfy ρ+pr=0\rho+p_r = 0, so the normal energy flux vanishes and the conservation identity reduces to

ddτ(4πa2σ)+Pddτ(4πa2)=0.(33)\frac{d}{d\tau}(4\pi a^2\sigma) + \mathcal{P}\frac{d}{d\tau}(4\pi a^2) = 0. \tag*{(33)}

This identifies the shell rest mass as ms=4πa2σm_s = 4\pi a^2\sigma and supplies the matter conservation equation for a chosen shell equation of state.

Static stresses and admissible radii

For an equilibrium radius a0a_0, we set a˙=a¨=0\dot{a} = \ddot{a} = 0 and require

F+(r)>0(r≥a0),0<a0<H−1,a0>η.(34)F_+(r) > 0 \quad(r \ge a_0), \qquad0 < a_0 < H^{-1}, \qquad a_0 > \eta. \tag*{(34)}

Whenever the exterior extension has horizons, the first condition places the shell outside its largest root. The static density and pressure are

σ0=1−H2a02−F+(a0)4πa0,(35)\sigma_0 = \frac{\sqrt{1-H^2a_0^2}-\sqrt{F_+(a_0)}}{4\pi a_0}, \tag*{(35)}
P0=18πa0[F+(a0)+a0F+′(a0)/2F+(a0)−1−2H2a021−H2a02].(36)P_0 = \frac{1}{8\pi a_0}\left[\frac{F_+(a_0)+a_0F_+'(a_0)/2}{\sqrt{F_+(a_0)}}-\frac{1-2H^2a_0^2}{\sqrt{1-H^2a_0^2}}\right]. \tag*{(36)}

In particular, positivity of the density requires

H2≤1−F+(a0)a02.(37)H^2 \le\frac{1-F_+(a_0)}{a_0^2}. \tag*{(37)}

The exterior lapse and its radial derivative enter independently in the pressure, making the surface stresses sensitive to both the potential and its gradient near the shell.

For fixed ADM mass, we use the dimensionless variables

x0=a0M,λ=H2M2,η^=ηM,x_0 = \frac{a_0}{M}, \qquad\lambda= H^2M^2, \qquad\hat{\eta} = \frac{\eta}{M},
Θ=8θ^πM,σ^=Mσ,P^=MP.(38)\Theta= \frac{8\sqrt{\hat{\theta}}}{\sqrt{\pi}M}, \qquad\hat{\sigma} = M\sigma, \qquad\hat{P} = MP. \tag*{(38)}

The mass MM is the fixed normalization of the stresses, while λ\lambda fixes the interior curvature independently of x0x_0. Writing F(x)=F+(Mx)F(x) = F_+(Mx) and a subscript xx for differentiation, Eqs. (35) and (36) become

σ^0=1−λx02−F(x0)4πx0,(39)\hat{\sigma}_0 = \frac{\sqrt{1-\lambda x_0^2}-\sqrt{F(x_0)}}{4\pi x_0}, \tag*{(39)}
P^0=18πx0[F(x0)+x0Fx(x0)/2F(x0)−1−2λx021−λx02].(40)\hat{P}_0 = \frac{1}{8\pi x_0}\left[\frac{F(x_0)+x_0F_x(x_0)/2}{\sqrt{F(x_0)}}-\frac{1-2\lambda x_0^2}{\sqrt{1-\lambda x_0^2}}\right]. \tag*{(40)}

Figure 2 separates the three parameter dependences. Increasing the KS scale lowers the exterior lapse and raises the surface density. Increasing the noncommutative scale raises the exterior lapse and lowers the density. Larger interior curvature reduces F−(a0)F_-(a_0), lowering σ0\sigma_0 and increasing P0P_0. The inverse-square-root factors in Eq. (36) produce rapid pressure growth near the simple exterior horizon and the de Sitter horizon.

Figure 2. Static surface density (top row) and pressure (bottom row) calculated with the unexpanded exterior. The left column varies η^=0,0.06,0.12\hat{\eta}=0,0.06,0.12 at fixed Θ=0.06\Theta=0.06, λ=0.2\lambda=0.2; the middle column varies Θ=0,0.03,0.06,0.09\Theta=0,0.03,0.06,0.09 at fixed η^=0.06\hat{\eta}=0.06, λ=0.2\lambda=0.2; the right column varies λ=0,0.1,0.2\lambda=0,0.1,0.2 at fixed Θ=η^=0.06\Theta=\hat{\eta}=0.06. Each radius scan holds the two exterior parameters and the physical interior curvature fixed. The common interval 2.01≤x0≤2.202.01\leq x_0\leq2.20 lies outside every exterior outer horizon and inside each nonzero-curvature interior horizon.

Energy conditions of the shell

We evaluate the four-dimensional distributional shell stress Tμ^ν^=diag⁡(σ,0,P,P)δ(ℓ)T^{\hat{\mu}\hat{\nu}} = \operatorname{diag}(\sigma,0,P,P)\delta(\ell), where ℓ\ell is proper distance normal to the shell. The corresponding inequalities are

NEC/WEC:σ≥0,σ+P≥0,SEC:σ≥0,σ+P≥0,σ+2P≥0,DEC:σ≥∣P∣.(41)\begin{aligned} \mathrm{NEC/WEC}:&\quad\sigma\ge0,\quad\sigma+P \ge0,\\ \mathrm{SEC}:&\quad\sigma\ge0,\quad\sigma+P \ge0,\quad\sigma+2P \ge0,\\ \mathrm{DEC}:&\quad\sigma\ge\lvert P\rvert. \tag*{(41)} \end{aligned}

For null vectors tangent to the shell, the NEC reduces to σ+P≥0\sigma+ P \ge0; allowing a normal component adds σ≥0\sigma\ge0. These inequalities test the shell contribution separately from the smooth interior and exterior stresses [9].

The optical reference family x0=2x_0 = 2, Θ=0.06\Theta= 0.06, λ=0.2\lambda= 0.2 has positive density and pressure for η^=0.03,0.06,0.09,0.12\hat{\eta} = 0.03, 0.06, 0.09, 0.12. Across these four cases, Mσ0M\sigma_0 increases from 0.0129395 to 0.0132232, while MP0MP_0 increases from 0.108220 to 0.113281. The NEC, WEC, and SEC are satisfied at the shell, whereas the pressure exceeds the density and violates the DEC.

The radius dependence is shown in Figure 3. For Θ=η^=0.06\Theta= \hat{\eta} = 0.06 and λ=0.2\lambda= 0.2, the density crosses zero at x0=2.14464689x_0 = 2.14464689, setting the upper WEC boundary within the plotted interval. The combinations σ0+P0\sigma_0 + P_0 and σ0+2P0\sigma_0 + 2P_0 remain positive there. For the flat-core limit λ=0\lambda= 0, the DEC is recovered at x0=2.05085820x_0 = 2.05085820 and remains satisfied over the remainder of the displayed interval. The increase in interior curvature raises the pressure relative to the density, tightening the allowed shell-matter range. Radial stability can be studied by supplementing Eq. (33) with a response law dP/dσdP/d\sigma and perturbing the equilibrium radius.

Figure 3. Energy-condition combinations for Θ=η^=0.06\Theta=\hat{\eta}=0.06 and fixed λ=0,0.1,0.2\lambda=0,0.1,0.2. The four panels display Mσ0M\sigma_0, M(σ0+P0)M(\sigma_0+\mathcal{P}_0), M(σ0+2P0)M(\sigma_0+2\mathcal{P}_0), and M(σ0−∣P0∣)M(\sigma_0-\lvert\mathcal{P}_0\rvert). The zero line makes the weak and dominant-condition boundaries explicit. All curves use the same unexpanded exterior and the mass normalization in Eq. (38).

Null geodesics and optical signatures

We consider a static shell with unit transmission, illuminated by a uniform source plane at asymptotic infinity behind the object. A static observer is placed at Do=2000MD_o = 2000M. This extends the backlighting construction of Refs. [13, 14] to the full NC–KS exterior and keeps the observer and source endpoints explicit. The primary numerical family has its shell inside the outer photon orbit; a separate radius scan follows the disappearance of the optical rings as the shell moves beyond that orbit. In every case the retained exterior is static. We use the unexpanded exterior F+(r)=1−η2/r2−2Mθ(r)/rF_+(r) = \sqrt{1-\eta^2/r^2}-2M\theta(r)/r for the numerical geodesics, critical quantities, and images throughout this section. The de Sitter interior has F−(r)=1−H2r2F_-(r) = 1-H^2r^2.

Geodesics and transparent-shell matching

In each static chart, spherical symmetry permits equatorial motion. With vv an affine parameter, the Killing constants are

E±=F±dt±dv,L±=r2dϕdv.(42)E_{\pm}=F_{\pm}\frac{dt_{\pm}}{dv},\qquad L_{\pm}=r^2\frac{d\phi}{dv}. \tag*{(42)}

The null constraint gives

(drdv)2=E±2−F±(r)L±2r2,\left(\frac{dr}{dv}\right)^2=E_{\pm}^2-\frac{F_{\pm}(r)L_{\pm}^2}{r^2},
(drdϕ)2=r4E±2L±2−r2F±(r).(43)\left(\frac{dr}{d\phi}\right)^2=r^4\frac{E_{\pm}^2}{L_{\pm}^2}-r^2F_{\pm}(r). \tag*{(43)}

Continuity of the photon frequency and tangential momentum in the shell’s orthonormal frame fixes

L+=L−=L,E+F+(a0)=E−F−(a0).(44)L_{+}=L_{-}=L,\qquad\frac{E_{+}}{\sqrt{F_{+}(a_0)}}=\frac{E_{-}}{\sqrt{F_{-}(a_0)}}. \tag*{(44)}

Define the redshift factor and exterior impact parameter by

C=F+(a0)F−(a0),b=LE+.(45)C=\frac{F_{+}(a_0)}{F_{-}(a_0)},\qquad b=\frac{L}{E_{+}}. \tag*{(45)}

Then E−=E+/CE_{-}=E_{+}/\sqrt{C} and the interior impact parameter is b−=Cbb_{-}=\sqrt{C}b. With the same ingoing or outgoing orientation, the radial momentum satisfies

(dr/dv)+F+(a0)=(dr/dv)−F−(a0).(46)\frac{(dr/dv)_{+}}{\sqrt{F_{+}(a_0)}}=\frac{(dr/dv)_{-}}{\sqrt{F_{-}(a_0)}}. \tag*{(46)}

The matched quantities describe transmission through the shell in a single local inertial frame.

The de Sitter orbit integrates to

r=rmsec⁡(ϕ−ϕm),rm=(1Cb2+H2)−1/2.(47)r=r_m\sec(\phi-\phi_m),\qquad r_m=\left(\frac{1}{Cb^2}+H^2\right)^{-1/2}. \tag*{(47)}

For rays that enter the shell, the two crossings have angular separation 2arccos⁡(rm/a0)2\arccos(r_m/a_0). The radial ray is obtained continuously as b→0b\to0. At infinity, the exterior trajectory approaches the straight-line form r=bsec⁡(ϕ−ϕc)r=b\sec(\phi-\phi_c).

A common time coordinate, t=t+t=t_{+} and t−=Ctt_{-}=\sqrt{C}t, expresses the matched geometry as

ds2=−A(r)dt2+B(r)dr2+r2dΩ2,(48)ds^2=-A(r)dt^2+B(r)dr^2+r^2d\Omega^2, \tag*{(48)}

with

(A,B)={(CF−,F−−1),r<a0,(F+,F+−1),r≥a0.(49)(A,B)= \begin{cases} (CF_{-},F_{-}^{-1}), & r<a_0,\\ (F_{+},F_{+}^{-1}), & r\geq a_0. \end{cases} \tag*{(49)}

The global energy is E=E+E=E_+ and the radial constraint becomes

AB(drdv)2+L2U(r)=E2,U(r)=A(r)r2.(50)AB\left(\frac{dr}{dv}\right)^2+L^2U(r)=E^2,\qquad U(r)=\frac{A(r)}{r^2}. \tag*{(50)}

Thus U(a0−)=U(a0+)=F+(a0)/a02U(a_0^-)=U(a_0^+)=F_+(a_0)/a_0^2. Its exterior local maximum controls the critical orbit; its central behavior is U∼C/r2U\sim C/r^2. The interior derivative U−′=−2C/r3U'_-=-2C/r^3 is negative. For a0<rpha_0<r_{\mathrm{ph}}, the exterior derivative at the shell is positive, so the matched potential has a cusp minimum followed by an exterior maximum, as in Ref. [13]. Moving the shell beyond rphr_{\mathrm{ph}} removes that exterior maximum from the physical spacetime.

Critical orbit and numerical trajectories

In the exterior, u=1/ru=1/r obeys

(dudϕ)2=b−2−u2F+(1/u),(51)\left(\frac{du}{d\phi}\right)^2=b^{-2}-u^2F_+(1/u), \tag*{(51)}
d2udϕ2=−uF+(1/u)+12F+′(1/u).(52)\frac{d^2u}{d\phi^2}=-uF_+(1/u)+\frac{1}{2}F'_+(1/u). \tag*{(52)}

Here F+′F'_+ denotes differentiation with respect to the areal radius. The leading inverse-radius metric reduces the second equation to u′′=−u+3Mu2−2qu3u''=-u+3Mu^2-2qu^3, where q=8MΘ/π−η2/2q=8M\sqrt{\Theta/\pi}-\eta^2/2. For the unexpanded exterior we solve

rcF+′(rph)−2F+(rph)=0,U′′(rph)<0,bc=rphF+(rph).(53)r_{\mathrm{c}}F'_+(r_{\mathrm{ph}})-2F_+(r_{\mathrm{ph}})=0,\qquad U''(r_{\mathrm{ph}})<0,\qquad b_{\mathrm{c}}=\frac{r_{\mathrm{ph}}}{\sqrt{F_+(r_{\mathrm{ph}})}}. \tag*{(53)}

The analytic leading-order comparison is

rph(2)=3M+9M2−8q2.(54)r_{\mathrm{ph}}^{(2)}=\frac{3M+\sqrt{9M^2-8q}}{2}. \tag*{(54)}

Figure 4. Matched optical potential for Θ=η^=0.06\Theta= \hat{\eta} = 0.06 and λ=0.01\lambda= 0.01, with increasing shell radius. Blue and black curves show the interior and retained exterior; the gray dashed curve shows the continuation of the exterior formula below the shell. Orange markers and vertical lines identify the shell. The black square in panel (a) marks the exterior maximum. Panels (b) and (c) place the shell beyond that maximum.

The entry threshold depends on whether the photon barrier is retained:

bent={bc,a0≤rph,bΣ=a0/F+(a0),a0>rph.(55)b_{\mathrm{ent}} = \begin{cases} b_{\mathrm{c}}, & a_{0} \le r_{\mathrm{ph}},\\ b_{\Sigma} = a_{0}/\sqrt{F_{+}(a_{0})}, & a_{0} > r_{\mathrm{ph}}. \end{cases} \tag*{(55)}

Incoming rays with b<bentb < b_{\mathrm{ent}} cross the shell. For b>bentb > b_{\mathrm{ent}}, the outermost accessible solution of

b−2=F+(rt)/rt2(56)b^{-2} = F_{+}(r_{\mathrm{t}})/r_{\mathrm{t}}^{2} \tag*{(56)}

sets the exterior turning point, with rt≥a0r_{\mathrm{t}} \ge a_{0}. For a0<rpha_{0} < r_{\mathrm{ph}}, a ray with b=bcb = b_{\mathrm{c}} asymptotically approaches rphr_{\mathrm{ph}}. For a0>rpha_{0} > r_{\mathrm{ph}}, the threshold ray grazes the shell at rt=a0r_{\mathrm{t}} = a_{0}.

For the numerical family we fix

Θ=0.06,x0=2,λ=0.20,\Theta= 0.06,\qquad x_{0} = 2,\qquad\lambda= 0.20,
η^=0.03, 0.06, 0.09, 0.12,(57)\hat{\eta} = 0.03,\ 0.06,\ 0.09,\ 0.12, \tag*{(57)}

using the mass-normalized variables defined above. In particular, F−(a0)=1−λx02=0.20F_{-}(a_{0}) = 1 - \lambda x_{0}^{2} = 0.20. The shell lapse ranges from 0.0148861 to 0.0131970 and remains positive. For this family, the bound μ(x)−xμ′(x)≥1−Θ/x>0\mu(x)-x\mu'(x) \ge1-\Theta/x > 0 for x≥x0x \ge x_{0} ensures that the exterior lapse increases throughout the retained region. Table 1 reports the critical quantities from the full lapse. Increasing η^\hat{\eta} lowers the barrier and moves its maximum and critical impact parameter outward.

η^\hat{\eta}CCrph/Mr_{\mathrm{ph}}/Mbc/Mb_{\mathrm{c}}/M
0.030.0744312.9597635.143971
0.060.0727432.9606885.145168
0.090.0699282.9622285.147162
0.120.0659852.9643835.149951

Table 1. Critical optical quantities from the unexpanded exterior for Θ=0.06\Theta=0.06, x0=2x_0=2, and λ=0.20\lambda=0.20.

Observer, deflection and source-plane visibility

At the static observer, let ψ\psi be the angle between a backward-traced ray and the inward radial direction. Its relation to the conserved impact parameter is

sin⁡ψ=bF+(Do)Do,ρcam=Dotan⁡ψ.(58)\sin\psi= \frac{b\sqrt{F_{+}(D_{\mathrm{o}})}}{D_{\mathrm{o}}},\qquad\rho_{\mathrm{cam}} = D_{\mathrm{o}}\tan\psi. \tag*{(58)}

The plots use the calibrated impact coordinates (by,bz)(b_{y}, b_{z}), with b2=by2+bz2b^{2} = b_{y}^{2} + b_{z}^{2}. (58) converts their radial scale to a physical angular image for the specified observer.

Define the exterior angular integral

I(r1,r2;b)=∫r1r2b drr21−b2F+(r)/r2.(59)I(r_{1},r_{2};b) = \int_{r_{1}}^{r_{2}} \frac{b\,dr}{r^{2}\sqrt{1-b^{2}F_{+}(r)/r^{2}}}. \tag*{(59)}

For a ray traced backward from the observer through the shell to the asymptotic source side, the deflection relative to the opposite radial direction is

Φ<(b)=I(a0,Do;b)+I(a0,∞;b)+2arccos⁡(rm/a0)−π,b<bent.(60)\Phi_{<}(b) = I(a_{0},D_{\mathrm{o}};b) + I(a_{0},\infty;b) + 2\arccos(r_{\mathrm{m}}/a_{0}) - \pi,\qquad b < b_{\mathrm{ent}}. \tag*{(60)}

For an exterior-return ray,

Φ>(b)=I(rt,Do;b)+I(rt,∞;b)−π,(61)\Phi_{>}(b) = I(r_{\mathrm{t}},D_{\mathrm{o}};b) + I(r_{\mathrm{t}},\infty;b) - \pi, \tag*{(61)}

with b>bentb > b_{\mathrm{ent}}. The radial limit is Φ<(0)=0\Phi_{<}(0) = 0. Relative to the phase Φ∞\Phi_{\infty} with both endpoints at infinity, the finite observer subtracts the smooth tail

JD(b)=I(D,∞;b)=bD+O(b3D3),J_{D}(b) = I(D,\infty;b) = \frac{b}{D} + O\left(\frac{b^{3}}{D^{3}}\right),
Φ(b)=Φ∞(b)−JDo(b).(62)\Phi(b) = \Phi_{\infty}(b) - J_{D_{\mathrm{o}}}(b). \tag*{(62)}

Cutting both endpoints off at the same radius DoD_{\mathrm{o}} instead gives ΦDo,Do=Φ∞−2JDo\Phi_{D_{\mathrm{o}},D_{\mathrm{o}}} = \Phi_{\infty} - 2J_{D_{\mathrm{o}}}. We use this second convention only for the numerical benchmark of Ref. [13].

For the source plane behind the object, the asymptotic outgoing direction of a backward ray has negative longitudinal component when cos⁡Φ>0\cos\Phi> 0. Its geometrical visibility is therefore

VGS(b)=1+sgn⁡[cos⁡Φ(b)]2.(63)\mathcal{V}_{\mathrm{GS}}(b) = \frac{1+\operatorname{sgn}[\cos\Phi(b)]}{2}. \tag*{(63)}

Figure 5. Null trajectories in the areal-radius plane for Θ=0.06\Theta= 0.06, x0=2x_0 = 2, and λ=0.20\lambda= 0.20, with η^=0.03\hat{\eta} = 0.03 (left) and 0.120.12 (right). These trajectories illustrate the asymptotic-observer limit. The shaded disk ends at the transparent shell; the dotted circle marks rphr_{\rm ph}. The rays have b/bc=0.6b/b_c = 0.6 (solid), 0.9990.999 (dashed), and 1.031.03 (dash-dotted). Penetrating rays traverse the interior, while the exterior-return ray turns outside the photon orbit.

The bright–dark boundaries solve

Φ(b)=(n−12)π,n=1,2,…(64)\Phi(b) = \left(n-\frac{1}{2}\right)\pi,\qquad n=1,2,\ldots \tag*{(64)}

We label penetrating roots by ζn\zeta_n and exterior-return roots by ωn\omega_n. The central bright disk has 0≤b<ζ10 \leq b < \zeta_1, followed by the dark annulus ζ1<b<ζ2\zeta_1 < b < \zeta_2. For a0<rpha_0 < r_{\rm ph}, further alternating annuli accumulate on bcb_c. These dark regions are defined by the prescribed rear illumination; their null rays return toward the observer-side sky, as discussed in Ref. [13].

For comparison, the associated horizon-bearing exterior has the same Φ>(b)\Phi_{>}(b) but captures rays below bcb_c. Its backlit image is

VBH(b)={0,b<bc,[1+sgn⁡(cos⁡Φ>(b))]/2,b>bc.(65)\mathcal{V}_{\rm BH}(b)= \begin{cases} 0, & b<b_c,\\ [1+\operatorname{sgn}(\cos\Phi_{>}(b))]/2, & b>b_c. \end{cases} \tag*{(65)}

For a0<rpha_0 < r_{\rm ph}, the gravastar and black-hole maps coincide outside the critical circle under the same observer and illumination conditions. The penetrating trajectories generate the additional central disk and inner annuli in the gravastar image.

Schwarzschild benchmark and deformed shadow

The reference uses rg=2Mr_g = 2M and h=rgHh = r_g H. Its h=0.4h = 0.4 stiff-shell equilibrium, P0=σ0P_0 = \sigma_0, gives a0/rg=a_0/r_g =

(D,D)(D,D)(D,∞)(D,\infty)(∞,∞)(\infty,\infty)
ζ1/rg\zeta_1/r_g1.731447841.730360091.72927227
ζ2/rg\zeta_2/r_g2.488517422.488356572.48819549
ω1/rg\omega_1/r_g3.079917603.081844623.08378338
ω2/rg\omega_2/r_g2.613885242.613927222.61396930

Table 2. Schwarzschild–de Sitter benchmark at h=0.4h = 0.4 and a0/rg=1.3027244501a_0/r_g = 1.3027244501. Finite endpoints are at D=1000rgD = 1000r_g; all boundary lengths are divided by rgr_g.

1.3027244501 and C=0.3189965465C = 0.3189965465, in agreement with the rounded configuration used in Ref. [13]. With Θ=η=0\Theta= \eta= 0, the photon orbit and critical scale are rph/rg=3/2r_{\rm ph}/r_g = 3/2 and bc/rg=33/2b_c/r_g = 3\sqrt{3}/2. Table II gives the boundary values obtained directly from the geodesic equations for the three endpoint conventions. The first column reproduces the finite-radius construction underlying the reference deflection plot. The other columns quantify the effect of the observer and source limits.

For the NC–KS family, Table III gives the finite-observer boundaries and the exterior potential maximum. Increasing η^\hat{\eta} moves the first three penetrating boundaries inward and the exterior-return boundaries outward. Across the tabulated family, the central bright radius decreases by 1.66%, while bcb_c increases by 0.116%. For η^=0.06\hat{\eta} = 0.06, placing the observer at 2000M2000M instead of infinity changes ζ1/M\zeta_1/M from 2.00744857 to 2.00856902 and ω1/M\omega_1/M from 6.12377444 to 6.11991137. The finitedistance correction is therefore resolved separately from the deformation dependence.

Figure 6. Deflection and visibility-boundary construction. Left: the Schwarzschild–de Sitter reference configuration with h=0.4h = 0.4, a0/rg=1.3027244501a_0/r_g = 1.3027244501 and both endpoints at 1000rg1000r_g. Right: the full NC–KS geometries of Eq. (57) with an observer at 2000M2000M and an asymptotic source plane. Penetrating and exterior-return branches approach the critical impact parameter from opposite sides; in the right panel they are solid and dashed, respectively. Horizontal lines identify the first two phase thresholds for the visibility boundaries.

We evaluate the angular integrals in u=1/ru = 1/r, using u=ut(1−t2)u = u_t(1 - t^2) to regularize an exterior turning point. Six independent 50-digit quadratures, including the Schwarzschild benchmark and NC–KS roots, give phase residuals below 3.2×10−123.2 \times10^{-12} radians. Tightening the numerical tolerances by a factor of ten changes the tested impact parameters by less than 4.6×10−14M4.6 \times10^{-14}M.

Ring mergers as the shell radius increases

To follow the shell across the photon orbit while keeping its interior curvature fixed, we consider a second family,

Θ=η^=0.06,λ=0.01,2.01≤a0/M≤5.30.(66)\Theta= \hat{\eta} = 0.06,\qquad\lambda= 0.01,\qquad2.01 \le a_0/M \le5.30. \tag*{(66)}

The entire scan lies outside the exterior horizon and below the de Sitter horizon H−1=10MH^{-1} = 10M. The surface density is positive throughout. The reference’s P=σ\mathcal{P} = \sigma condition fixes its benchmark shell; the present scan varies the equilibrium stresses according to Eqs. (35) and (36) at fixed H2H^2.

For a0>rpha_0 > r_{\rm ph}, the penetrating phase is finite. Numerically, it increases toward its grazing maximum in this family. Since rm(bΣ)=a0r_m(b_\Sigma) = a_0, its interior angular contribution vanishes there, and

Φmax⁡(a0)=I(a0,Do;bΣ)+I(a0,∞;bΣ)−π.(67)\Phi_{\max}(a_0) = I(a_0,D_o;b_\Sigma) + I(a_0,\infty;b_\Sigma) - \pi. \tag*{(67)}

A penetrating boundary and its exterior partner merge when the grazing phase reaches the corresponding threshold. Equivalently,

a0,n=rt(ωn),bΣ(a0,n)=ζn=ωn.(68)a_{0,n} = r_t(\omega_n),\qquad b_\Sigma(a_{0,n}) = \zeta_n = \omega_n. \tag*{(68)}

This relation generalizes the geometric construction in Ref. [13] to the deformed exterior. It also explains why the exterior boundary and its merger radius depend on the exterior metric and endpoint prescription, while the approach of the penetrating boundary depends on the interior.

The exterior photon orbit is at rph/M=2.96068756r_{\rm ph}/M = 2.96068756. The second boundary pair merges at a0,2/M=3.17092181a_{0,2}/M = 3.17092181, where ζ2/M=ω2/M=5.17770248\zeta_2/M = \omega_2/M = 5.17770248. The first pair merges at a0,1/M=4.61956378a_{0,1}/M = 4.61956378, where ζ1/M=ω1/M=6.11991137\zeta_1/M = \omega_1/M = 6.11991137. Between these radii, a single dark annulus lies between ζ1\zeta_1 and ω1\omega_1. At a0/M=4.8a_0/M = 4.8, the maximum phase is 1.46082635<π/21.46082635 < \pi/2, giving the uniformly visible map in Figure 8. Thus, the dark annulus persists over a finite range of shell radii after the exterior photon orbit has been excised.

Figure 8. Evolution of the backlit rings with shell radius for Eq. (66), Do/M=2000D_o/M = 2000, and the asymptotic source plane. Amber marks visible source-plane pixels and black marks dark pixels. The boundary curves end where the penetrating and exterior-return roots merge. The vertical line marks xph=rph/Mx_{\rm ph} = r_{\rm ph}/M. The lower maps show the same family at a0/M=2.2,3.2,4.8a_0/M = 2.2, 3.2, 4.8. At 3.2M3.2M one dark annulus remains; at 4.8M4.8M the source plane is visible throughout the displayed image.

Thin-disk transfer functions and intensity maps

The optical appearance also depends on the distribution of emitting matter. We now place a geometrically and optically thin test layer in the equatorial plane and view it from the symmetry axis at Do=2000MD_o = 2000M. The layer emits isotropically with the local static frame. We neglect absorption and take unit transmission through the shell. This construction adapts the transfer-function method of Refs. [16, 17] to the de Sitter interior and the full NC–KS exterior. We use the same exterior emission profile for the gravastar and its associated black-hole geometry.

η^\hat{\eta}M2Umax⁡M^{2}U_{\max}ζ1/M\zeta_{1}/Mζ2/M\zeta_{2}/Mζ3/M\zeta_{3}/Mω2/M\omega_{2}/Mω1/M\omega_{1}/M
0.030.037792272.0151274.2644854.9363285.1765266.118888
0.060.037774692.0085694.2610594.9362675.1777026.119911
0.090.037745421.9975074.2551564.9361035.1796636.121617
0.120.037704551.9817304.2464644.9357335.1824056.124002

Table III. Full-metric potential maximum and visibility boundaries for Θ=0.06\Theta= 0.06, a0/M=2a_{0}/M = 2, λ=0.20\lambda= 0.20, Do/M=2000D_{o}/M = 2000, and the asymptotic source plane. Boundary lengths are in units of MM.

Disk crossings and redshift

Let χ\chi denote the accumulated orbital angle of a backward-traced ray, measured from the observer’s polar axis. Equatorial crossings occur at

χm=(m−12)π,m=1,2,….(69)\chi_m = \left(m-\frac{1}{2}\right)\pi,\qquad m=1,2,\ldots. \tag*{(69)}

The transfer function Rm(b)\mathcal{R}_m(b) is the areal radius at the mmth crossing. On the incoming exterior leg, χ(r)=I(r,Do;b)\chi(r)=I(r,D_o;b). For a penetrating ray, write χΣ=I(a0,Do;b)\chi_{\Sigma}=I(a_0,D_o;b) and α=arccos⁡(rm/a0)\alpha=\arccos(r_m/a_0), where rmr_m is the interior turning radius in Eq. (47). The ray exits the core at χΣ+2α\chi_{\Sigma}+2\alpha, and its outgoing exterior angle is

χout(r)=χΣ+2α+I(a0,r;b).(70)\chi_{\mathrm{out}}(r)=\chi_{\Sigma}+2\alpha+I(a_0,r;b). \tag*{(70)}

An exterior-return ray instead has χout(r)=I(rt,Do;b)+I(rt,r;b)\chi_{\rm out}(r) = I(r_t,D_o;b) + I(r_t,r;b). Solving these relations at the angles in Eq. (69) gives all exterior transfer branches. We assign emission to crossings within the disk’s radial support. A captured black-hole ray contributes at any such crossing before reaching the horizon.

For a static emitter at radius rr, the frequency ratio measured by the static observer is

g(r)=νoνe=F+(r)F+(Do).(71)g(r) = \frac{\nu_o}{\nu_e} = \sqrt{\frac{F_+(r)}{F_+(D_o)}}. \tag*{(71)}

Conservation of Iν/ν3I_\nu/\nu^3 along a ray gives a factor g3g^3 in the specific intensity. Integrating over observed frequency supplies one further factor of gg. If J(r)\mathcal{J}(r) is the bolometric intensity added by one disk crossing in the static emitting frame, the observed intensity is

Io(b)=∑m∈E(b)[F+(Rm(b))F+(Do)]2J(Rm(b)),(72)I_o(b) = \sum_{m \in\mathcal{E}(b)} \left[\frac{F_+(R_m(b))}{F_+(D_o)}\right]^2 \mathcal{J}(R_m(b)), \tag*{(72)}

where E(b)\mathcal{E}(b) contains the exterior crossings. The core and shell have zero emissivity. The matching factor CC affects the crossing radii through the interior trajectory, while the endpoint frequency shift follows Eq. (71).

For the shared exterior disk with inner edge above a0a_0, the two geometries have identical incoming contributions. The gravastar adds the outgoing contributions after transmission through the core. Consequently, for a0<rpha_0 < r_{\rm ph},

IoGS(b)≥IoBH(b),b<bc,I_o^{\rm GS}(b) \ge I_o^{\rm BH}(b), \qquad b < b_c,
IoGS(b)=IoBH(b),b>bc.(73)I_o^{\rm GS}(b) = I_o^{\rm BH}(b), \qquad b > b_c. \tag*{(73)}

These relations provide direct checks of the transfer calculation. The radial ray has no exterior equatorial crossing, so Io(0)=0I_o(0) = 0 for both objects. Thus the same transparent core that produces a bright center under rear-plane illumination can have a dark center when illuminated by an exterior disk.

Emission profiles and color images

We evaluate the images at Θ=η^=0.06\Theta= \hat{\eta} = 0.06, a0/M=2a_0/M = 2, and λ=0.20\lambda= 0.20. Two prescribed profiles isolate the effect of moving the emitting inner edge inward. The first is concentrated near the outer marginally stable circular orbit, whose radius solves

rF+F+′′+3F+F+′−2r(F+′)2=0,r=rISCO.(74)rF_+F_+'' + 3F_+F_+' - 2r(F_+')^2 = 0,\qquad r = r_{\mathrm{ISCO}}. \tag*{(74)}

The outer solution is selected on the timelike circular-orbit branch, with 2F+−rF+′>02F_+ - rF_+' > 0. The second profile extends inward to the photon orbit. For the chosen exterior, rISCO/M=5.91178880r_{\mathrm{ISCO}}/M = 5.91178880 and rph/M=2.96068756r_{\mathrm{ph}}/M = 2.96068756. We choose

JI(r)I∗=e−(r−rISCO)/MH(r−rISCO),(75)\frac{\mathcal{J}_{\mathrm{I}}(r)}{I_*} = e^{-(r-r_{\mathrm{ISCO}})/M} H(r-r_{\mathrm{ISCO}}), \tag*{(75)}
JII(r)I∗=1+e−41+e2(r−rph−2M)/MH(r−rph),(76)\frac{\mathcal{J}_{\mathrm{II}}(r)}{I_*} = \frac{1+e^{-4}}{1+e^{2(r-r_{\mathrm{ph}}-2M)/M}}H(r-r_{\mathrm{ph}}), \tag*{(76)}

where HH is the step function and I∗I_* sets the emitted intensity scale. These explicit profiles follow the sharply truncated and extended inner-emission patterns illustrated in Refs. [16, 17]. Here rISCOr_{\mathrm{ISCO}} specifies an emission edge; the prescribed emitting frame remains static in both models. Figure 9 displays the emission profiles and the first four crossing functions. Figures 10 and 11 compare the corresponding intensity profiles and images at the same observer distance and normalization.

The color maps represent the intensity in Eq. (72). The emission profile and redshift set each crossing’s intensity; the slope dRm/dbdR_m/db controls how its emitting radial range maps into an apparent ring width. The critical circle continues to be fixed by the exterior geometry. For emission extending to rphr_{\mathrm{ph}}, successively higher crossing orders accumulate near bcb_c. The ideal critical ray has an unbounded number of crossings in this optically thin prescription; finite image pixels integrate the resulting logarithmic intensity enhancement. For a pixel PP of area APA_P in the calibrated impact plane we compute

IˉP=1AP∫PIo(by2+bz2) dby dbz.(77)\bar{I}_P = \frac{1}{A_P}\int_P I_o\left(\sqrt{b_y^2+b_z^2}\right)\,db_y\,db_z. \tag*{(77)}

The angular measure of a circular image annulus follows from Eq. (58):

dΩo=2πF+(Do)b dbDo21−F+(Do)b2/Do2.(78)d\Omega_o = \frac{2\pi F_+(D_o)b\,db}{D_o^2\sqrt{1-F_+(D_o)b^2/D_o^2}}. \tag*{(78)}

We integrate Io dΩoI_o\,d\Omega_o over the circular aperture b≤10Mb \le10M. The gravastar-to-black-hole ratios are 1.0493 for model I and 1.2319 for model II. The enhanced inner illumination therefore increases the integrated image intensity by approximately 4.93% and 23.19%, respectively, for these source prescriptions.

The final radial sampling contains 9610 rays and resolves up to the twelfth chronological disk crossing outside the narrow critical strip. Refining the ray sampling changes the aperture-integrated intensities by less than 1.1×10−51.1 \times10^{-5} relative and the pixel intensities by less than 1.1×10−3I∗1.1 \times10^{-3}I_*. Doubling the radial integration bins changes any displayed pixel by less than 2.5×10−4I∗2.5 \times10^{-4}I_*. The independent crossing and image-integration checks are included in the accompanying numerical data.

Optical degeneracy and higher-order parameter separation

At fixed MM, shell radius a0a_0 and interior curvature H2H^2, every geometric quantity constructed from FqF_q depends on (s,e)(s,e) only through qq. Two parameter pairs with equal qq therefore have the same shell stress, matching redshift, photon orbit and ray trajectories in this approximation. Parameter scans at fixed ss or fixed ee measure different directions through this one-dimensional family. We now retain the coefficient DD in Eq. (9) to determine how additional optical information enters.

Photon orbit and logarithmic deflection

For F4=Fq+D/r4F_4 = F_q + D/r^4, the photon-orbit condition is

rph4−3Mrph3+2qrph2+3D=0.(79)r_{\mathrm{ph}}^4 - 3Mr_{\mathrm{ph}}^3 + 2qr_{\mathrm{ph}}^2 + 3D = 0. \tag*{(79)}

We select the nondegenerate outer maximum of F4/r2F_4/r^2 above the shell. On the D=0D=0 background,

r0=3M+9M2−8q2,b0=r0Fq(r0).(80)r_0 = \frac{3M+\sqrt{9M^2-8q}}{2},\qquad b_0 = \frac{r_0}{\sqrt{F_q(r_0)}}. \tag*{(80)}

Implicit differentiation of Eq. (79) at fixed qq gives

∂rph∂D∣0=−3r02(2r0−3M),(81)\left.\frac{\partial r_{\mathrm{ph}}}{\partial D}\right|_0 = -\frac{3}{r_0^2(2r_0-3M)}, \tag*{(81)}
∂ln⁡bc∂D∣0=−12r04Fq(r0).(82)\left.\frac{\partial\ln b_c}{\partial D}\right|_0 = -\frac{1}{2r_0^4F_q(r_0)}. \tag*{(82)}

We also define the background logarithmic coefficient aˉ0=(1−2q/r02)−1/2\bar{a}_0 = (1-2q/r_0^2)^{-1/2}. Keeping the exact qq background retains its nonlinear contributions while isolating the first correction in DD.

For rays that turn outside the photon orbit, the strong-deflection expansion [37] is

Φ>(b)=−aˉln⁡(bbc−1)+bˉ+o(1),(83)\Phi_>(b) = -\bar{a}\ln\left(\frac{b}{b_c}-1\right)+\bar{b}+o(1), \tag*{(83)}

with

aˉ=22F(rph)−rph2F′′(rph)=(1−2qrph2−9Drph4)−1/2for F=F4.(84)\bar{a} = \sqrt{\frac{2}{2F(r_{\mathrm{ph}})-r_{\mathrm{ph}}^2F''(r_{\mathrm{ph}})}} = \left(1-\frac{2q}{r_{\mathrm{ph}}^2}-\frac{9D}{r_{\mathrm{ph}}^4}\right)^{-1/2} \qquad\text{for } F=F_4. \tag*{(84)}

Figure 9. Emission profiles and face-on disk transfer functions for Θ=η^=0.06\Theta= \hat{\eta} = 0.06, a0/M=2a_0/M = 2, λ=0.20\lambda= 0.20, and Do/M=2000D_o/M = 2000. The transfer curves show the first four exterior equatorial crossings of backward rays, retaining their chronological indices. The gravastar includes additional outgoing branches after core transmission. The critical impact parameter separates transmitted and exterior-return trajectories and is marked by the vertical dotted line. Horizontal dashed lines mark the horizon in the black-hole panel and the shell in the gravastar panel.

For penetrating rays, the exterior integral crosses both sides of the potential maximum on each passage. Expanding the radial denominator quadratically around that maximum yields

Φ<(b)=−2aˉln⁡(1−bbc)+bˉ<+o(1).(85)\Phi_{<}(b) = -2\bar{a}\ln\left(1-\frac{b}{b_c}\right) + \bar{b}_{<} + o(1). \tag*{(85)}

This factor of two is the established inner-image result for ultracompact objects [38]. For a shell strictly inside the nondegenerate photon orbit, the de Sitter contribution in Eq. (60) remains finite and enters bˉ<\bar{b}_{<}. The finite-observer tail JDo(b)J_{D_o}(b) is also smooth at bcb_c, so it changes the finite strong-deflection terms while preserving these logarithmic coefficients. Consequently, consecutive visibility boundaries, separated by π\pi in deflection angle, obey

ωn+1−bcωn−bc⟶e−π/aˉ,bc−ζn+1bc−ζn⟶e−π/(2aˉ).(86)\frac{\omega_{n+1}-b_c}{\omega_n-b_c} \longrightarrow e^{-\pi/\bar{a}}, \qquad \frac{b_c-\zeta_{n+1}}{b_c-\zeta_n} \longrightarrow e^{-\pi/(2\bar{a})}. \tag*{(86)}

Thus the exterior and interior boundary sequences give two estimates of the same local curvature of the photon barrier.

Local separation of the deformation scales

On the leading cancellation curve q=0q = 0, one has e=16Mse = 16Ms and D<0D < 0 for every nonzero physical deformation.

To first order in D/M4D/M^4,

rph=3M−D9M3+⋯ ,bc=33M(1−D54M4+⋯ ),aˉ=1+D18M4+⋯ .(87)\begin{aligned} r_{\mathrm{ph}} &= 3M - \frac{D}{9M^3} + \cdots,\\ b_c &= 3\sqrt{3}M\left(1-\frac{D}{54M^4}+\cdots\right),\\ \bar{a} &= 1+\frac{D}{18M^4}+\cdots. \tag*{(87)} \end{aligned}

The corrections raise rphr_{\mathrm{ph}} and bcb_c and lower aˉ\bar{a}. The omitted dimensionless contributions are of order D2/M8D^2/M^8 within F4F_4, with an additional contribution of order E/M6E/M^6 from the full lapse. The Schwarzschild cancellation at order r−2r^{-2} therefore acquires a calculable residual at order r−4r^{-4}.

For an inference setup with independently calibrated mass and distance, define Q=q/M2Q = q/M^2 and δ=D/M4\delta= D/M^4. The linear response about Schwarzschild is

\begin{pmatrix} b_c/(3\sqrt{3}M)-1\\ \bar{a}-1 \end{pmatrix} = \begin{pmatrix} -1/6 & -1/54\\ 1/9 & 1/18 \end{pmatrix} \begin{pmatrix} Q\\ \delta \end{pmatrix} + O(Q^2,Q\delta,\delta^2). \tag*{(88)}\end{pmatrix}

The response matrix has determinant −7/972-7/972. The map from the microscopic parameters to the exterior coefficients has determinant

det⁡∂(q,D)∂(s,e)=−2Me−8π2Ms2.(89)\det\frac{\partial(q,D)}{\partial(s,e)}=-2Me-8\pi^2Ms^2. \tag*{(89)}

Both maps are locally invertible in the weakly deformed regime with M>0M>0, s,e≥0s,e\geq0, away from the undeformed origin. Their composition shows how bc/Mb_c/M and aˉ\bar{a} encode independent information about the two deformation scales. The microscopic inversion becomes poorly conditioned as ss and ee approach zero, so a measurement forecast should propagate mass, distance and image-model uncertainties through this response matrix. Table IV gives two equal-qq examples that coincide exactly in the leading model. With the full lapse their differences are Δbc/M=7.15620×10−5\Delta b_c/M = 7.15620 \times10^{-5} and Δaˉ=−4.29028×10−5\Delta\bar{a} = -4.29028 \times10^{-5}. The r−4r^{-4} approximation reproduces these splittings with relative discrepancies of 0.377% and 0.833%, respectively; the r−6r^{-6} term improves both results. Across the examples, the largest expansion ratios at the shell are πs/a0=0.01885\pi s/a_0 = 0.01885 and e/a0=0.13416\sqrt{e}/a_0 = 0.13416. Figure 12 follows the splitting continuously along the equal-qq family. Direct near-critical integration also recovers the penetrating-ray slope 2aˉ2\bar{a} with relative error below 1.9×10−71.9 \times10^{-7} for the tabulated pairs.

Figure 12. Optical splitting along the constant-qq family q/M2=0.06q/M^2 = 0.06, with e/M2=16s/M−0.12e/M^2 = 16s/M - 0.12. Deviations from the common inverse-square prediction are shown for (a) the critical impact parameter and (b) the strong-deflection coefficient. The full metric is compared with the expansions through r−4r^{-4} and r−6r^{-6}. The labeled points are the examples in Table IV; the thin horizontal reference represents the inverse-square model.

QuantityPair APair B
s/Ms/M0.0080.012
e/M2e/M^20.0080.072
F(a0)F(a_0)0.014997820.01495345
rph/Mr_{\rm ph}/M2.95945605362.9595390775
bc/Mb_c/M5.14357323225.1436447942
aˉ\bar{a}1.00691969761.0068767948

Table IV. Two parameter pairs with q/M2=0.06q/M^2 = 0.06, a0/M=2a_0/M = 2 and H2M2=0.2H^2M^2 = 0.2. The full exterior is static above each shell and has an unstable photon orbit outside it.

Figure 10. Observed bolometric intensity for emission model I. The black-hole and transparent-gravastar rows use the same exterior, disk profile and observer. Columns show the radial intensity, the full image, and the inner image. The dashed purple curve isolates the light received after core transit. The maps use a common linear scale 0≤Iˉo/I⋆≤0.60 \leq\bar{I}_{o}/I_{\star} \leq0.6, also used in Figure 11; purple through orange, yellow and white indicate increasing intensity. Each 800×800800 \times800 map averages the intensity over its pixels. The full and inner fields span [−10M,10M]2[-10M,10M]^2 and [−6M,6M]2[-6M,6M]^2, respectively. Image coordinates are the calibrated impact coordinates of Eq. (58).

Figure 11. The same comparison for emission model II, which extends to rphr_{\rm ph}. Contributions from repeated disk crossings produce additional inner structure in the transparent-gravastar image. The color scale represents the same bolometric quantity and is shared by both geometries and both emission models. The radial curves show pointwise samples, while the image colors show pixel averages.

Conclusions

We constructed a thin-shell gravastar from a de Sitter interior and a phenomenological exterior combining the full Lorentzian mass profile with the KS factor. Interpreting the exterior through the Einstein equations supplies a consistent effective source and the standard junction conditions. The shell is restricted to radii at which the retained exterior and the interior lapse are positive.

The surface stresses depend on the shell radius, the independent interior curvature and both deformation scales. For the optical reference configuration, the weak and strong surface energy conditions hold, whereas the dominant condition fails. Transparent ray tracing under rear-plane illumination gives a central illuminated region and alternating visibility rings. Increasing the KS parameter in the chosen family moves the exterior photon orbit and critical impact parameter outward, while the first three interior visibility boundaries move inward. The higher-order interior boundaries follow the shift of the critical scale, illustrating the different roles of the shell redshift and the exterior photon barrier.

The finite-observer construction reproduces the Schwarzschild–de Sitter reference geodesics and gives a direct comparison with the backlit black-hole exterior. For the ultracompact reference family, the two images agree outside the critical circle; transmission through the gravastar adds the central disk and inner rings. For the separate fixed-curvature scan with Θ=η^=0.06\Theta= \hat{\eta} = 0.06 and λ=0.01\lambda= 0.01, the exterior photon orbit is removed from the retained geometry at a0/M=2.96068756a_0/M = 2.96068756. A dark annulus persists until the first boundary pair merges at a0/M=4.61956378a_0/M = 4.61956378. Its survival beyond the photon-orbit radius ties the backlit dark region to the full deflection map and the source geometry.

For a face-on thin emitting layer, the observed intensity is the sum of the redshift-weighted contributions from exterior disk crossings. The gravastar and black hole share the incoming contribution, while the transparent gravastar adds light from the outgoing trajectory after core transit. Their intensities agree outside the critical circle. The two prescribed emission profiles produce different inner ring brightnesses, and both have a dark central line of sight because the radial ray misses the exterior emitting layer. These images connect the core-transmission mechanism to a specified source model.

For the associated horizon-bearing family, the physical horizon radius determines the ADM mass and surface-gravity temperature. The effective Einstein description gives area entropy together with radial-pressure work. At fixed deformation lengths, the mass-profile identity relates the ADM-mass variation to the entropy variation. The admissible outer-horizon branches displayed here have decreasing temperature and negative entropy heat response, and the exact pure KS limit recovers the Schwarzschild temperature at fixed mass.

The leading exterior coefficient q=8Mθ/π−η2/2q = 8M\sqrt{\theta/\pi} - \eta^2/2 reduces the two microscopic scales to a single geometric parameter. Retaining the next coefficient DD breaks this degeneracy. The critical impact parameter and logarithmic strong-deflection coefficient have a nonsingular response to (q,D)(q,D), and the full-metric calculation resolves their splitting along an equal-qq family. This result identifies the observables and accuracy scales needed for a parameter-estimation study. Extending the calculation to a specified shell equation of state, moving emitters and absorption would connect the equilibrium geometries to dynamical stability and more detailed emission models.

Acknowledgments

We thank CNPq and CAPES for partial financial support. M.A. A. acknowledges support from CNPq (Grant no. 301683/2025 − 5). A. T. N. S. thanks the Paraíba State Research Support Foundation (FAPESQ) (Grant No. 765/2026) for financial support. L.C. acknowledges support from CNPq (Grant no. 306842/2026 − 2).

Numerical implementation and reproducibility

The shell and thermodynamic scans evaluate the unexpanded lapse and its analytic derivatives. Positivity bounds on μ−rμ′\mu-r\mu' certify the retained static exterior and outer-horizon branch used in the figures. Critical optical quantities follow from bracketed root finding for the outer photon orbit. The ray integrals are evaluated with endpoint-regularizing substitutions and adaptive quadrature; the independent high-precision checks are reported in § 5. The observer endpoint is retained explicitly through the exterior tail integral. The reference benchmark uses two finite endpoints, while the NC–KS source-plane images use one finite observer and an asymptotic source. The radius scan follows the change in the entry threshold at a0=rpha_0 = r_{\mathrm{ph}} and evaluates the grazing limit at each ring merger. The equal-qq calculations use 45-digit arithmetic. Differencing the penetrating phases at 1−b/bc=10−71-b/b_c = 10^{-7} and 10−810^{-8} measures the coefficient in Eq. (85). Binary images are constructed from the computed visibility boundaries at the resolution given in Figure 7. The shell-radius scan samples 124 admissible radii with positive surface density. Root tables, endpoint comparisons and numerical convergence checks are supplied with the figures.

Figure 7. Backlit visibility maps of the transparent gravastar (top) and its associated black-hole exterior (bottom). Columns use η^=0.03,0.06,0.12\hat{\eta}=0.03,0.06,0.12, with the remaining parameters as in Table III. Amber and black denote visible and dark regions of the same uniform asymptotic source plane. The dotted critical circle marks bcb_{\mathrm{c}}; the axes use calibrated impact coordinates. Each map samples [−6.8M,6.8M]2[-6.8M,6.8M]^2 on an 800×800800 \times800 grid. Eight penetrating and four exterior-return boundaries resolve the annuli down to an accumulation interval smaller than 9.24×10−5M9.24 \times10^{-5}M, compared with the 0.017M0.017M pixel width.

The disk calculation evaluates the exterior equatorial crossings of backward rays from the polar observer and adds the local bolometric emission with the finite-observer redshift factor. Interior transit uses the analytic de Sitter angle. Captured black-hole trajectories retain their disk intersections before terminating at the horizon. The intensity sampling resolves the distinct transfer branches and the jumps at the prescribed emission edges. Convergence tests compare ray integration tolerances and image resolution near the critical circle, as detailed in Sec. VI. Pixel integration uses analytic intersections of radial annuli with square image pixels. In the strip ∣1−b/bc∣<10−7|1-b/b_c| < 10^{-7}, we match the finite part of the intensity to the directly integrated boundary values and continue the local logarithmic term. For model II its coefficient is aˉI∗[F+(rph)/F+(Do)]2/π\bar{a}_I^*[F_+(r_{\mathrm{ph}})/F_+(D_o)]^2/\pi for both objects above bcb_c and for the gravastar below it. The captured black-hole branch below bcb_c has half this coefficient because its emitting segment covers the outer half of the photon-orbit bottleneck. The coefficient vanishes for model I, whose inner edge is outside the photon orbit. Halving the strip and adding direct rays changes the integrated intensities by less than 2.9×10−72.9 \times10^{-7} relative and any tested pixel by less than 2.1×10−5I∗2.1 \times10^{-5} I_*. OpenAI Codex, using a GPT-6-based model, assisted with symbolic and numerical code development, calculation checks, literature verification, and manuscript revision, including the higher-order optical analysis and the disk transfer-function calculation.

References

References

  1. [1]K. Akiyama et al. [Event Horizon Telescope], “First M87 Event Horizon Telescope Results. I. The Shadow of the Supermassive Black Hole,” Astrophys. J. Lett. 875, L1 (2019) doi:10.3847/2041-8213/ab0ec7 [arXiv:1906.11238 [astro-ph.GA]].DOI
  2. [2]K. Akiyama et al. [Event Horizon Telescope], “First Sagittarius A* Event Horizon Telescope Results. I. The Shadow of the Supermassive Black Hole in the Center of the Milky Way,” Astrophys. J. Lett. 930, no.2, L12 (2022) doi:10.3847/2041-8213/ac6674 [arXiv:2311.08680 [astro-ph.HE]].DOI
  3. [3]R. Abbott et al. [KAGRA, VIRGO and LIGO Scientific], “Population of Merging Compact Binaries Inferred Using Gravitational Waves through GWTC-3,” Phys. Rev. X 13, no.1, 011048 (2023) doi:10.1103/PhysRevX.13.011048 [arXiv:2111.03634 [astro-ph.HE]].DOI
  4. [4]P. O. Mazur and E. Mottola, “Gravitational Condensate Stars: An Alternative to Black Holes,” (2001) [arXiv:gr-qc/0109035 [gr-qc]].DOI
  5. [5]P. O. Mazur and E. Mottola, “Gravitational Vacuum Condensate Stars,” Proc. Natl. Acad. Sci. USA 101, 9545–9550 (2004) doi:10.1073/pnas.0402717101 [arXiv:gr-qc/0407075 [gr-qc]].DOI
  6. [6]W. Israel, “Singular hypersurfaces and thin shells in general relativity,” Nuovo Cim. B 44, 1–14 (1966) doi:10.1007/BF02710419 [erratum: Nuovo Cim. B 48, 463 (1967), doi:10.1007/BF02721210].DOI
  7. [7]M. Visser and D. L. Wiltshire, “Stable gravastars: An Alternative to black holes?,” Class. Quant. Grav. 21, 1135–1152 (2004) doi:10.1088/0264-9381/21/4/027 [arXiv:gr-qc/0310107 [gr-qc]].DOI
  8. [8]P. Martin Moruno, N. Montelongo Garcia, F. S. N. Lobo and M. Visser, “Generic thin-shell gravastars,” JCAP 03, 034 (2012) doi:10.1088/1475-7516/2012/03/034 [arXiv:1112.5253 [gr-qc]].DOI
  9. [9]D. Horvat and S. Ilijic, “Gravastar energy conditions revisited,” Class. Quant. Grav. 24, 5637–5649 (2007) doi:10.1088/0264-9381/24/22/022 [arXiv:0707.1636 [gr-qc]].DOI
  10. [10]P. Pani, E. Berti, V. Cardoso, Y. Chen and R. Norte, “Gravitational wave signatures of the absence of an event horizon. I. Nondradial oscillations of a thin-shell gravastar,” Phys. Rev. D 80, 124047 (2009) doi:10.1103/PhysRevD.80.124047 [arXiv:0909.0287 [gr-qc]].DOI
  11. [11]P. Pani, E. Berti, V. Cardoso, Y. Chen and R. Norte, “Gravitational-wave signatures of the absence of an event horizon. II. Extreme mass ratio inspirals in the spacetime of a thin-shell gravastar,” Phys. Rev. D 81, 084011 (2010) doi:10.1103/PhysRevD.81.084011 [arXiv:1001.3031 [gr-qc]].DOI
  12. [12]N. Uchikata, S. Yoshida and P. Pani, “Tidal deformability and I-Love-Q relations for gravastars with polytropic thin shells,” Phys. Rev. D 94, no.6, 064015 (2016) doi:10.1103/PhysRevD.94.064015 [arXiv:1607.03593 [gr-qc]].DOI
  13. [13]N. Sakai, H. Saida and T. Tamaki, “Gravastar Shadows,” Phys. Rev. D 90, no.10, 104013 (2014) doi:10.1103/PhysRevD.90.104013 [arXiv:1408.6929 [gr-qc]].DOI
  14. [14]T. Kubo and N. Sakai, “Gravitational lensing by gravastars,” Phys. Rev. D 93, no.8, 084051 (2016) doi:10.1103/PhysRevD.93.084051.
  15. [15]J. L. Rosa, D. S. J. Codreiro, C. F. B. Macedo and F. S. N. Lobo, “Observational imprints of gravastars from accretion disks and hot spots,” Phys. Rev. D 109, no.8, 084002 (2024) doi:10.1103/PhysRevD.109.084002 [arXiv:2401.07766 [gr-qc]].DOI
  16. [16]S. E. Gralla, D. E. Holz and R. M. Wald, “Black hole shadows, photon rings, and lensing rings,” Phys. Rev. D 100, 024018 (2019) doi:10.1103/PhysRevD.100.024018, [arXiv:1906.00873 [astro-ph.HE]].DOI
  17. [17]J. Peng, M. Guo and X.-H. Feng, “Observational signature and additional photon rings of an asymmetric thin-shell wormhole,” Phys. Rev. D 104, 124010 (2021), doi:10.1103/PhysRevD.104.124010, [arXiv:2102.05488 [gr-qc]].DOI
  18. [18]P. Nicolini, A. Smailagic and E. Spallucci, “Noncommutative geometry inspired Schwarzschild black hole,” Phys. Lett. B 632, 547–551 (2006) doi:10.1016/j.physletb.2005.11.004 [arXiv:gr-qc/0510112 [gr-qc]].DOI
  19. [19]M. M. Anacleto, F. A. Brito, J. A. V. Campos and E. Passos, “Absorption and scattering of a noncommutative black hole,” Phys. Lett. B 803, 135334 (2020) doi:10.1016/j.physletb.2020.135334 [arXiv:1907.13107 [hep-th]].DOI
  20. [20]F. S. N. Lobo and R. Garattini, “Linearized stability analysis of gravastars in noncommutative geometry,” JHEP 12, 065 (2013) doi:10.1007/JHEP12(2013)065 [arXiv:1004.2520 [gr-qc]].DOI
  21. [21]A. Banerjee and S. Hansraj, “Stability analysis of Lower Dimensional Gravastars in noncommutative geometry,” Eur. Phys. J. C 76, no.11, 641 (2016) doi:10.1140/epjc/s10052-016-4500-3 [arXiv:1607.03875 [gr-qc]].
  22. [22]A. Övgün, A. Banerjee and K. Jusufi, “Charged Thin-shell Gravastars in Noncommutative Geometry,” Eur. Phys. J. C 77, no.8, 566 (2017) doi:10.1140/epjc/s10052-017-5139-4 [arXiv:1704.00603 [gr-qc]].DOI
  23. [23]A. T. N. Silva, M. A. Anacleto and L. Casarini, “Thin-shell gravastar in a noncommutative BTZ geometry,” Phys. Dark Univ. 44, 101479 (2024) doi:10.1016/j.dark.2024.101479 [arXiv:2310.08852 [gr-qc]].DOI
  24. [24]M. A. Anacleto, A. T. N. Silva and L. Casarini, “Thin-shell Gravastar Model in a BTZ geometry with minimum length,” Phys. Lett. B 876, 140387 (2026) doi:10.1016/j.physletb.2026.140387 [arXiv:2504.03824 [gr-qc]].DOI
  25. [25]M. A. Anacleto, A. T. N. Silva, L. Casarini and B. R. Carvalho, “Noncommutative BTZ Gravastar in Gauss-Bonnet Gravity,” (2026) [arXiv:2610.18752 [gr-qc]].arxiv.org/abs/2610.18752
  26. [26]M. A. Anacleto, A. T. N. Silva and L. Casarini, “Shadow of a noncommutative thin-shell gravastar,” Annals Phys. 494, 170697 (2026) doi:10.1016/j.aop.2026.170697 [arXiv:2605.03897 [gr-qc]].DOI
  27. [27]D. I. Kazakov and S. N. Solodukhin, “On Quantum Deformation of the Schwarzschild Solution,” Nucl. Phys. B 429, 153–176 (1994) doi:10.1016/S0550-3213(94)80045-6 [arXiv:hep-th/9310150 [hep-th]].
  28. [28]R. A. Konoplya, “Quantum corrected black holes: Quasi-normal modes, scattering, shadows,” Phys. Lett. B 804, 135363 (2020) doi:10.1016/j.physletb.2020.135363 [arXiv:1912.10582 [gr-qc]].DOI
  29. [29]J. Peng, M. Guo and X.-H. Feng, “Influence of quantum correction on black hole shadows, photon rings, and lensing rings,” Chin. Phys. C 45, 085103 (2021) doi:10.1088/1674-1137/ac06bb [arXiv:2008.00657 [gr-qc]].DOI
  30. [30]Y.-X. Huang, S. Guo, Y.-H. Cui, Q.-Q. Jiang and K. Lin, “Influence of accretion disk on the optical appearance of the Kazakov-Solodukhin black hole,” Phys. Rev. D 107, 123009 (2023) doi:10.1103/PhysRevD.107.123009 [arXiv:2311.00032 [gr-qc]].
  31. [31]S. V. Bolokhov, K. A. Bronnikov and R. A. Konoplya, “‘Overtones’ outburst and Hawking evaporation of Kazakov-Solodukhin quantum corrected black hole,” Fortschr. Phys. 73, 2400187 (2025) doi:10.1002/prop.202400187 [arXiv:2306.11083 [gr-qc]].DOI
  32. [32]J. A. V. Campos, M. A. Anacleto, F. A. Brito and E. Passos, “Quasinormal modes and shadow of noncommutative black hole,” Sci. Rep. 12, no.1, 8516 (2022) doi:10.1038/s41598-022-12343-w [arXiv:2103.10659 [hep-th]].DOI
  33. [33]M. A. Anacleto, F. A. Brito, J. A. V. Campos and E. Passos, “Absorption, scattering and shadow by a noncommutative black hole with global monopole,” Eur. Phys. J. C 83, no.4, 298 (2023) doi:10.1140/epjc/s10052-023-11484-0 [arXiv:2212.13973 [hep-th]].DOI
  34. [34]A. A. Araújo Filho, N. Heidari and A. Övgün, “Geodesics, accretion disk, gravitational lensing, time delay, and effects on neutrinos induced by a non-commutative black hole,” JCAP 06, 062 (2025) doi:10.1088/1475-7516/2025/06/062 [arXiv:2412.08369 [gr-qc]].
  35. [35]M. A. Anacleto, F. A. Brito, S. S. Cruz and E. Passos, “Noncommutative correction to the entropy of Schwarzschild black hole with GUP,” Int. J. Mod. Phys. A 36, no.3, 2150028 (2021) doi:10.1142/S0217751X21500287 [arXiv:2010.10366 [hep-th]].DOI
  36. [36]M. A. Anacleto, F. A. Brito, B. R. Carvalho and E. Passos, “Noncommutative correction to the entropy of BTZ black hole with GUP,” Adv. High Energy Phys. 2021, 6633684 (2021) doi:10.1155/2021/6633684 [arXiv:2010.09703 [hep-th]].DOI
  37. [37]V. Bozza, “Gravitational lensing in the strong field limit,” Phys. Rev. D 66, 103001 (2002), doi:10.1103/PhysRevD.66.103001, [arXiv:gr-qc/0208075].DOI
  38. [38]R. Shaikh, P. Banerjee, S. Paul and T. Sarkar, “Analytical approach to strong gravitational lensing from ultracompact objects,” Phys. Rev. D 99, 104040 (2019), doi:10.1103/PhysRevD.99.104040, [arXiv:1903.08211 [gr-qc]].DOI
  39. [39]R. M. Wald, “Black hole entropy is the Noether charge,” Phys. Rev. D 48, R3427–R3431 (1993), doi:10.1103/PhysRevD.48.R3427, [arXiv:gr-qc/9307038].DOI
  40. [40]T. Padmanabhan, “Classical and Quantum Thermodynamics of horizons in spherically symmetric spacetimes,” Class. Quantum Grav. 19, 5387–5408 (2002), doi:10.1088/0264-9381/19/21/306, [arXiv:gr-qc/0204019].DOI
  41. [41]M.-S. Ma and R. Zhao, “Corrected form of the first law of thermodynamics for regular black holes,” Class. Quantum Grav. 31, 245014 (2014), doi:10.1088/0264-9381/31/24/245014, [arXiv:1411.0833 [gr-qc]].DOI
  42. [42]B. Toshmatov, B. Ahmedov, N. Isamadinova and C. Yuan, “Regular black holes do not violate the first law of thermodynamics,” arXiv:2610.08099 [gr-qc] (2026).arxiv.org/abs/2610.08099
  43. [43]F. S. N. Lobo, P. Martin-Moruno, N. Montelongo-Garcia and M. Visser, “Novel stability approach of thin-shell gravastars,” (2015) [arXiv:1512.07659 [gr-qc]].arxiv.org/abs/1512.07659

Paper details

vlnc:W_gcv22w7a
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents