betaFeedback

WorksPhysics and Astronomy

Multifield tunable valley splitting in two-dimensional MXene Cr2_2COOH

Abstract

Manipulation of the valley degree of freedom provides a novel paradigm in quantum information technology. Here, through first-principles calculations and model analysis, we demonstrate that monolayer Cr2_2COOH MXene is a promising candidate material for valleytronics applications. We reveal that Cr2_2COOH is a ferromagnetic semiconductor and harbors valley features. Due to the simultaneous breaking inversion symmetry and time-reversal symmetry, the valleys are polarized spontaneously. Moreover, the valley polarization is sizeable in both the valence and conduction bands, benefiting the observation of the anomalous valley Hall effect. More remarkably, the valley splitting can be effectively tuned by the magnetization direction, strain and ferroelectric substrate. More interestingly, the ferroelectric substrate Sc2_2CO2_2 can not only regulate the MAE, but also tune valley polarization state. Our findings offer a practical way for realizing highly tunable valleys by multiferroic couplings.

Introduction

In addition to charge and spin, the valley index is rapidly emerging as a distinctive electronic degree of freedom of electrons, which has simulated intensive investigation recently [1, 2, 3, 4]. The valley generally refers to the local energy extremum point in the valence band or conduction band. The valley index is especially robust in terms of impurity and phonon scatterings due to the large separation in momentum space [5]. In order to make use of the valley index as an information carrier, it is necessary to manipulate the carriers in the valleys, thereby generating valley polarization. The external magnetic field or the proximity-induced Zeeman effect has been proven to be effective in tuning valley degeneracy for transition metal dichalcogenides monolayer [6, 7, 8, 9]. There is an intriguing question, whether a valley in a two-dimensional (2D) material can be modulated by both strain and magnetic means. If so, the valley degree of freedom would be highly adjustable and have huge applications in valleytronics. However, there are few examples of strain and magnetic simultaneous control of the valley, which is worthy of further exploration [10, 11].

Recently, a series of MXenes with the general formula Mn+1CnX\mathrm{M}_{n+1}\mathrm{C}_{n}\mathrm{X} (M = transition metal, X = F, Cl, OH, or O, n=1n = 1–4) have been exfoliated from their MAX (M is an transition metal, A is mainly a group IIIA or IVA element, X is C and/or N) [12] phases to their 2D limit [12, 13, 14, 15, 16]. They have various excellent properties, such as intrinsic ferromagnetism [17], topological insulating [18], and superconductivity [19]. The interplay between spin and valley in 2D magnetic materials may produce spontaneous valley polarization, without the need for annoying external methods.

So far, only a few candidate systems have been proposed, such as VSe2\mathrm{VSe}_{2}, Cr2Se3\mathrm{Cr}_{2}\mathrm{Se}_{3}, XY (X = K, Rb, Cs; Y = N, P, As, Sb, Bi), MnPSe3\mathrm{MnPSe}_{3}, VSiXN4\mathrm{VSiXN}_{4} (X = C, Si, Ge, Sn, Pb) [20, 21, 22, 23, 24, 25]. Therefore, if the valley degree of freedom is found in magnetic MXene monolayer, it becomes more attractive. It is likely to realize coupling between magnetic order and the valley degree of freedom. It will be further regulated by multiple physical fields.

In this work, using first-principles calculations, we present the discovery of intrinsic spontaneous valley polarization in 2D Cr2COOH\mathrm{Cr}_{2}\mathrm{COOH} MXene. Our results show that monolayer Cr2COOH\mathrm{Cr}_{2}\mathrm{COOH} is a semiconductor with a moderate band gap locating at the K and K′ points, forming two inequivalent valleys. When the spin-orbit coupling (SOC) is switched on, the valleys of Cr2COOH\mathrm{Cr}_{2}\mathrm{COOH} show a large valley spin splitting. More interestingly, the large valley splitting occurs not only at the valence band maximum (VBM), but also show at the conduction band minimum (CBM), which is different from that of the typical 2D ferrovalley materials. Subsequently, the multiferroic couplings between ferromagnetism and ferrovalley are found. Importantly, the valley splitting can be tuned by the strain, magnetization rotation and ferroelectric substrate. We also confirm the anomalous valley Hall effect (AVHE) can be realized in 2D Cr2COOH\mathrm{Cr}_{2}\mathrm{COOH}. The highly tunable valley splitting in multiferoic MXene provides a practical avenue for designing advanced spintronic and valleytronic devices based on the couplings between multiferroic orders.

Structures and computational methods

To explore the electronic and magnetic structures, we used the Vienna Ab initio Simulation Package (VASP) [26, 27, 28] within the framework of the density functional theory (DFT) for the first-principles calculations. The exchange-correlation energy was described by the generalized gradient approximation (GGA) with the Perdew-Burke-Ernzerhof (PBE) functional [29]. The plane-wave basis with a kinetic energy cutoff of 500 eV was employed, and 21×21×121 \times21 \times1 and 30×30×130 \times30 \times1 Γ\Gamma-centered kk meshes were adopted for structural optimization and self-consistent calculations. A vacuum of 20 Å was set along the cc-axis, to avoid the interaction between the sheet and its periodic images. The total energy convergence criterion and the force were set to be 10−610^{-6} eV and -0.01 eV/Å, respectively. To describe strongly correlated 3d3d electrons of Cr [30], the GGA + U method is applied. The Coulomb repulsion UU is varied between 0 eV and 5 eV. To investigate the dynamical stability, the phonon spectra were calculated using a finite displacement approach as implemented in the PHONOPY code [31]. Ab initio molecular dynamic (AIMD) simulation is carried out in a canonical ensemble based on the algorithm of Nose at a temperature of 300 K with a 3×3×13 \times3 \times1 supercell [32, 33, 34]. The maximally localized Wannier functions (MLWFs) were employed to construct an effective tight-binding Hamiltonian to explore the Berry curvature, anomalous Hall conductivity (AHC), and edge states [35]. The calculated the AHC, it performed the Berry curvature calculations using the formula

σxy=−e2ℏ∫BZd3k(2π)3Ωz(k),(1)\sigma_{xy}=-\frac{e^2}{\hbar}\int_{\mathrm{BZ}}\frac{d^3k}{(2\pi)^3}\Omega^z(\mathbf{k}), \tag*{(1)}
Ωz(k)=−∑nfn∑n′≠n2Im⁡⟨ψnk∣vx∣ψn′k⟩⟨ψn′k∣vy∣ψnk⟩(En′−En)2,(2)\Omega^z(\mathbf{k})=-\sum_n f_n\sum_{n'\ne n}\frac{2\operatorname{Im}\langle\psi_{n\mathbf{k}}|v_x|\psi_{n'\mathbf{k}}\rangle\langle\psi_{n'\mathbf{k}}|v_y|\psi_{n\mathbf{k}}\rangle}{(E_{n'}-E_n)^2}, \tag*{(2)}

where Ωz(k)\Omega^z(\mathbf{k}) is the Berry curvature in the reciprocal space, vxv_x and vyv_y are operator components along the x and y directions, and fn=1f_n=1 for the occupied bands, respectively [36, 37, 38].

Results and Discussion

Structure and stability

As shown in Figure 1(a), it shows the crystal structure of monolayer Cr2_2COOH MXene. The monolayer has 2D hexagonal lattice, and consists of six atomic layers stacked as H-O-Cr-C-Cr-O. Therefore, Cr2_2COOH exhibits the intrinsic broken inversion symmetry. The in-plane lattice constant of its is optimized to 2.99 Å and the thickness of the monolayer is 5.46 Å. To investigate the bonding characteristics of Cr2_2COOH MXene, we calculate its electron localization function (ELF) in the plane containing H-O-Cr-C-Cr-O [39]. The ELF value is between 0 and 1. 1 means that the electron is completely localized, while 0 indicates that the electron is completely delocalized. As shown in Figure 1(c), the electrons are mainly localized around the atoms, while

Crystal structure, Brillouin zone, electron localization function, phonon dispersion, and orbital splitting of Cr2COOH MXene

Figure 1. (a) The top and side views of the crystal structure for Cr2_2COOH monolayer. The blue, green, magenta, and white balls represent Cr, C, O, and H elements, respectively. (b) The Brillouin zone (BZ) of the honeycomb lattice with the reciprocal lattice vectors b⃗1\vec{b}_1 and b⃗2\vec{b}_2. Γ\Gamma, K, and M are high-symmetry points in the BZ. (c) Electron localization function of Cr2_2COOH monolayer. (d) Splitting of dd orbitals of the Cr atom under the distorted octahedral crystal field. (e) The calculated phonon dispersion curves along the high-symmetry lines.

those in between the atoms are negligible, indicating an ionic bonding for all the bonds. Moreover, the thermal dynamic stability of monolayer Cr2_2COOH MXene is estimated by the phonon dispersion spectrum and AIMD calculations. As shown in Figure 1(d), The absence imaginary modes along the high-symmetry lines verifies the dynamical stability of monolayer Cr2_2COOH MXene. The total energies of monolayer Cr2_2COOH MXene during 5 ps with a time step of 1 fs at 300 K by AIMD simulations are shown in Figure S1. The small fluctuations of energy and integrity of the original configuration with time evolution demonstrate good thermal stability of monolayer Cr2_2COOH MXene.

Magnetic property

The valence electronic configuration of the Cr atom is 3d54s13d^5 4s^1. For the upper Cr atom (Cr1_1), it would lose three electrons to the six neighboring C and O atoms because of its surroundings, leading to the electronic configuration of 3d34s03d^3 4s^0. While for the lower Cr atom (Cr2_2), due to the different coordinated atoms, one more electron would be transferred to the neighboring atoms, and the electronic configuration of Cr2_2 would be 3d24s03d^2 4s^0. According to Hund’s rule and the Pauli exclusion principle, the electron configuration of Cr1_1 would half fill the t2gt_{2g} orbitals, while the Cr2_2 would half-fill two of these three orbitals, as shown in Figure 1(e). The Cr2_2COOH MXene has a total magnetic moment of 5 μB\mu_B per unit cell, while Cr1_1 and Cr2_2 yield magnetic moment of 3 μB\mu_B and 2 μB\mu_B, respectively.

To determine the magnetic ground state of the monolayer Cr2_2COOH MXene, four possible magnetic configurations are considered, namely, the ferromagnetic (FM) and three types of antiferromagnetic ones (AFM1, AFM2, AFM3) using the GGA + U method [see Figure. 2(a-d)]. To determine a reasonable value of U, the Coulomb repulsion U is varied between 0 eV and 5 eV. As shown in Figure S2(a), The FM state is the ground state in all case except U = 0 eV. It is well known that transition metal atoms must be modified by Hubbard U in the DFT. In previous reports, the Hubbard U is often taken to be 3 eV for the Cr atom [40, 41]. Therefore, we choose Ueff=3U_{\mathrm{eff}} = 3 eV to investigate the monolayer Cr2_2COOH MXene. The FM state is 362.5 meV, 1196.6 meV, and 1315.5 meV lower in energy than the AFM1, AFM2, and AFM3 states, respectively. The FM ground state of the monolayer Cr2_2COOH MXene can be understood by studying the crystal structure. In Cr2_2COOH, the Cr-C-Cr bond angles are 88.4°, which is close to 90.0°. According to the Goodenough-Kanamori-Anderson rule [42, 43, 44], this configuration is beneficial to FM coupling.

The magnetic anisotropy energy (MAE) is very important to determine the thermal stability of magnetic ordering. The MAE mainly originates from the SOC interaction [45, 46]. Heavy elements are more preferred because their strong SOC effect can give rise to a large MAE. It is defined as MAE = E100_{100} - E001_{001}, where E100_{100} and E001_{001} represents the total energy of the magnetic moment along [100] and [1], respectively. The negative value of the MAE shows the easy axis is along the x axis rather than along the z axis. The MAE is -0.245 meV per unit cell, indicating the magnetization along the x axis. With such a small MAE, the direction of magnetization can be easily controlled out-of-plane by a small external magnetic field. For hexagonal lattice magnetization direction along (100), the magnetic field (H=−4Kμ0MH = - \frac{4K}{\mu_0M}) is required to tune the direction of in-plane magnetization to out-of-plane magnetization [47]. Where K is the MAE, μ0\mu_0 is permeability of vacuum, and M is the total magnetic moment of the system. Thus, adjusting the magnetization direction of Cr2_2COOH out-of-plane requires 1.13 T. Importantly, we found that Hubbard U had almost no effect on the MAE, as shown in Figure S2(b).

Based on the octahedral symmetry of monolayer Cr2_2COOH MXene, the angular dependence of the MAE can be described using the equation:

MAE=K1cos⁡2θ+K2cos⁡4θ,(3)\mathrm{MAE}=K_1\cos^2\theta+K_2\cos^4\theta, \tag*{(3)}

where K1_1 and K2_2 are the anisotropy constants and θ\theta is the azimuthal angle of rotation. If K1>0_1 > 0, the preferred magnetization direction will be along an in-plane easy axis (x-axis), while K1<0_1 < 0 suggests that it will be perpendicular to the z-axis. Our calculated MAEs display a good fit of Eq (3) as presented in Figure 2(e), it clearly shows that the MAE strongly depends on the direction of magnetization in the xz plane.

Figure 2. (a) FM, (b) AFM1, (c) AFM2, and (d) AFM3 configurations in Cr2_2COOH monolayer. (e) Angular dependence of the MAE of Cr2_2COOH with the direction of magnetization lying on the xz plane.

In addition, we calculated the Curie temperature of Cr2_2COOH by the Monte Carlo simulations, as shown in fig:S3. The Monte Carlo simulations were implemented on a 60 × 60 lattice grid lasting for 100000 steps with a step size of 1 K for the calculation of Curie temperature. Although the U value has an effect on the Curie temperature, the Curie temperature is above 700 K. This is perfectly suited to the application of spintronic devices.

Electronic band structure

In the following, we focus on band structures and associated valley properties of monolayer Cr2_2COOH MXene, which are shown in Figure 3. In the absence of SOC, the band structure around the Fermi level are only from the spin up channel. It is a semiconductor when Hubbard U is less than 3 eV [see Figure S4(a)]. As the U value continues to increase, monolayer Cr2_2COOH MXene becomes a half-metal. From the orbital-resolved band structure, as shown in Figure 3(b, Figure 3c), the VBM bands are mainly contributed by Cr1_1 dxz_{xz}/dyz_{yz} orbitals, while the CBM bands are dominated by dxy_{xy}/dx2−y2_{x^2-y^2} of the Cr2_2 atom. In order to show more clearly the orbital composition of the VBM and CBM of K point, we calculated the charge density. As shown in Figure S5, this is almost identical to the orbital-resolved band structure. When the SOC is included, as shown in Figure 3(d), the degeneracy between K and K′ valleys is lifted. In detail, the K valley shifts above the K′ valley in the valence band, while the K valley shifts below the K′ valley in the conduction band. Hence, the valley polarization is realized spontaneously in both the valence and conduction bands of monolayer Cr2_2COOH MXene. The total valley splitting is 93 meV in the Cr2_2COOH monolayer, which is larger than that in other ferrovalley materials, e. g. VSe2_2 (90 meV) [20], Cr2_2Se3_3 (18.7 meV) [21], VSiXN4_4 (∼ 70 meV) [24], and VCl2_2 (22.35 meV) [48]. This huge valley splitting is promising to be observed experimentally. The spontaneous valley polarization originates from the combined effect of magnetic exchange interaction and SOC.

Band structures of Cr₂COOH monolayer and orbital projections

Figure 3. Band structures of Cr2_2COOH monolayer (a) without and (d) with considering the SOC. Band structures of Cr2_2COOH monolayer without considering SOC projected on the dd orbitals of (b) Cr1_1 and (c) Cr2_2 atoms and with considering SOC projected on the dd orbitals of (e) Cr1_1 and (f) Cr2_2 atoms. The blue and magenta lines represent spin up and spin down bands, respectively. The valence and conduction band valley splitting are indicated by the light blue and green shading, respectively.

Importantly, we found that the spontaneous valley polarization increases gradually with the increase of U value [see Figure S2(c, d)]. The change of band gap with U value is listed in Table SI.

Interestingly, the spontaneous valley polarization of monolayer Cr2_2COOH MXene is different from most of the previously investigated 2D valleytronic materials [20, 21, 24, 48, 49], wherein a sizeable spontaneous valley polarization usually occurs in either the valence band (VSe2_2 [20], VSiXN4_4 [24], YX2_2 [48]) and GdI2_2 [49], or conduction band (Cr2_2Se3_3 [21]), but not both.

In order to understand the underlying mechanism for the ferrovalley effect in Cr2_2COOH, we tried to construct an effective Hamiltonian model based on the DFT calculations. we take the SOC effect as the perturbation term, which is

H^SOC=λS^⋅L^=H^SOC0+H^SOC1,(4)\hat{H}_{\mathrm{SOC}}=\lambda\hat{S}\cdot\hat{L}=\hat{H}_{\mathrm{SOC}}^{0}+\hat{H}_{\mathrm{SOC}}^{1}, \tag*{(4)}

where S^\hat{S} and L^\hat{L} are spin angular and orbital angular operators, respectively. H^SOC0\hat{H}_{\mathrm{SOC}}^{0} and H^SOC1\hat{H}_{\mathrm{SOC}}^{1} represent the interaction between the same spin states and between opposite spin states, respectively. Since the VBM and CBM belong to the spin up bands, for monolayer Cr2_2COOH MXene, the single valley is composed of only one spin channel [see Figure 3(a)], and the other spin channel is far from the valleys. Hence, the term H^SOC1\hat{H}_{\mathrm{SOC}}^{1} can be ignored. On the other hand, H^SOC0\hat{H}_{\mathrm{SOC}}^{0} can be written in polar angles

H^SOC0=λS^z′(L^zcos⁡θ+12L^+e−iϕsin⁡θ+12L^−eiϕsin⁡θ),(5)\hat{H}_{\mathrm{SOC}}^{0}=\lambda\hat{S}_{z}^{\prime}\left(\hat{L}_{z}\cos\theta+\frac{1}{2}\hat{L}_{+}e^{-i\phi}\sin\theta+\frac{1}{2}\hat{L}_{-}e^{i\phi}\sin\theta\right), \tag*{(5)}

In the out-of-plane magnetization case, θ=ϕ=0∘\theta=\phi=0^\circ, then the H^SOC0\hat{H}_{\mathrm{SOC}}^{0} term can be simplified as

H^SOC0=λS^z′L^z,(6)\hat{H}_{\mathrm{SOC}}^{0}=\lambda\hat{S}_{z}^{\prime}\hat{L}_{z}, \tag*{(6)}

Considering the orbital contribution around the valleys and the C3_3 symmetry, we adopted ∣ψvτ⟩=12(∣dxz⟩+iτ∣dyz⟩)⊗∣↑⟩|\psi_v^\tau\rangle=\frac{1}{\sqrt{2}}(|d_{xz}\rangle+i\tau|d_{yz}\rangle)\otimes|\uparrow\rangle, ∣ψcτ⟩=12(∣dxy⟩+iτ∣dx2−y2⟩)⊗∣↑⟩|\psi_c^\tau\rangle=\frac{1}{\sqrt{2}}(|d_{xy}\rangle+i\tau|d_{x^2-y^2}\rangle)\otimes|\uparrow\rangle as the orbital basis for the VBM and CBM, where τ=±1\tau=\pm1 indicate the valley index corresponding to K/K′. The energy levels of the valleys for the VBM and CBM can be expressed as Evτ=⟨ψvτ∣H^SOC0∣ψvτ⟩E_v^\tau=\langle\psi_v^\tau|\hat{H}_{\mathrm{SOC}}^{0}|\psi_v^\tau\rangle and Ecτ=⟨ψcτ∣H^SOC0∣ψcτ⟩E_c^\tau=\langle\psi_c^\tau|\hat{H}_{\mathrm{SOC}}^{0}|\psi_c^\tau\rangle, respectively. Then, the valley polarization in the valence and conduction bands can be expressed as

EvK−EvK′=i⟨dxz∣H^SOC0∣dyz⟩−i⟨dyz∣H^SOC0∣dxz⟩≈2α,(7)E_v^{K}-E_v^{K'}=i\langle d_{xz}|\hat{H}_{\mathrm{SOC}}^{0}|d_{yz}\rangle-i\langle d_{yz}|\hat{H}_{\mathrm{SOC}}^{0}|d_{xz}\rangle\approx2\alpha, \tag*{(7)}
EcK−EcK′=i⟨dxy∣H^SOC0∣dx2−y2⟩−i⟨dx2−y2∣H^SOC0∣dxy⟩≈4β,(8)E_c^{K}-E_c^{K'}=i\langle d_{xy}|\hat{H}_{\mathrm{SOC}}^{0}|d_{x^2-y^2}\rangle-i\langle d_{x^2-y^2}|\hat{H}_{\mathrm{SOC}}^{0}|d_{xy}\rangle\approx4\beta, \tag*{(8)}

where the L^z∣dxz⟩=iℏ∣dyz⟩\hat{L}_z|d_{xz}\rangle=i\hbar|d_{yz}\rangle, L^z∣dyz⟩=−iℏ∣dxz⟩\hat{L}_z|d_{yz}\rangle=-i\hbar|d_{xz}\rangle, L^z∣dxy⟩=−2iℏ∣dx2−y2⟩\hat{L}_z|d_{xy}\rangle=-2i\hbar|d_{x^2-y^2}\rangle, L^z∣dx2−y2⟩=2iℏ∣dxy⟩\hat{L}_z|d_{x^2-y^2}\rangle=2i\hbar|d_{xy}\rangle, α=λ⟨dxz∣S^z′∣dxz⟩\alpha=\lambda\langle d_{xz}|\hat{S}_{z}^{\prime}|d_{xz}\rangle, and β=λ⟨dx2−y2∣S^z′∣dx2−y2⟩\beta=\lambda\langle d_{x^2-y^2}|\hat{S}_{z}^{\prime}|d_{x^2-y^2}\rangle. The analytical result certifies that the valley degeneracy splits for the valence and conduction bands are consistent with our DFT calculations (EvK−EvK′=27.9E_v^K-E_v^{K'}=27.9 meV, EcK−EcK′=65.1E_c^K-E_c^{K'}=65.1 meV).

Anomalous valley Hall effect

To characterize the valley-contrasting physics in monolayer Cr2_2COOH MXene, we calculate its Berry curvature. The Berry curvature Ω(k)\Omega(\boldsymbol{k}) of monolayer Cr2_2COOH MXene in the along high-symmetry points and entire 2D Brillouin zone is shown in Figure 4(a, Figure 4b). Clearly, the Berry curvature of monolayer Cr2_2COOH MXene is peaked around K and K′ valleys. The absolute values of Berry curvature at K and K′ valleys are different, and the signs are opposite. It indicated the simultaneous breaking of inversion symmetry and time-reversal symmetry in monolayer Cr2_2COOH MXene. By integrating the Berry curvature over the Brillouin zone, one can further calculate the AHC. As shown in Figure 4(c), when the Fermi level lies between the energies of the valence and conduction bands at the K and K′ valleys, as denoted the light blue and green shadows, a fully spin and valley polarized Hall conductivity is generated.

Berry curvature, anomalous Hall conductivity, and anomalous valley Hall effect schematic

Figure 4. (a) The Berry Curvatures of Cr2_2COOH along the high-symmetry line and in the Brillouin zone (b). (c) Calculated AHC σxy\sigma_{xy} as a function of Fermi energy. The light blue and green shadows denote the valence and conduction band valley splitting between the K and K′ valley. (d) Schematic diagram of tunable the anomalous valley Hall effect in hole-doped Cr2_2COOH monolayer at the K and K′ valley, respectively. The holes are denoted by the + symbol. Upward arrows and downward arrows refer to the spin up and spin down carriers, respectively.

The AVHE of monolayer Cr2_2COOH MXene is illustrated in Figure 4(d). With the hole-doping condition, when the magnetism direction of monolayer Cr2_2COOH MXene is in the +zz direction, the spin up holes from the K′ valley will be generated and accumulate on one boundary of the sample under an in-plane electrical field [upper plane of Figure 4(d)]. On the other hand, when the magnetism direction is in the -zz direction, the spin-up holes from the K valley will be generated and accumulate on the opposite boundary of the sample under an in-plane electrical field.

Magnetic tune valley splitting

Considering that the monolayer Cr2_2COOH MXene is found to be a ferrovalley material and it has ferromagnetic orders as well, we will further explore the coupling between these multiferroic orders. Firstly, we investigate the effect of the magnetization on the valley splittings. As shown in Figure 5, it exhibits the valley splitting of the valence and conduction bands as a function of the magnetization direction. With rotating the magnetization from the in-plane direction (0∘0^\circ) to the +zz direction (90∘90^\circ), the valley splitting of valence and conduction bands gradually increase from 0 meV to 27.9 meV, and 65.1 meV, respectively. As we continue rotating the magnetization to the -xx direction (180∘180^\circ), the magnitude of the valley splitting gradually decreases from the maximum to zero. Interestingly, the variation trend of valley splitting with angle is consistent that of the angular dependence of MAE. Moreover, the valley splitting of valence and conduction bands is entirely agreement with the two-fold relationship. It further proves the validity of our established effective Hamiltonian for valley splitting.

Angular dependence of valence and conduction band valley splitting

Figure 5. Angular dependence of the valence and conduction band valley splitting of Cr2_2COOH monolayer with the direction of magnetization lying on the xz plane is indicated by magenta and blue line, respectively.

Strain tune valley splitting

In device fabrication, a 2D material is often supported by a substrate which is likely to introduce strain to a 2D material due to lattice mismatch. T. Liu et al. observed that substrate-induced strain can modulate the spin dynamics in 2D transition metal dichalcogenide [50]. In addition, we also found that substrate-induced strain can tune spin Hall angle in 2D Bi2_2Se3_3 [51]. In the following, we investigate the effect of biaxial strain on the magnetic ground state, valley splitting, and MAE of monolayer Cr2_2COOH MXene. In the calculations, the biaxial strain is defined as ε=(a−a0)/a0×100%\varepsilon= (a-a_0)/a_0 \times100\%. In the formula, aa and a0a_0 represent lattice constant after and before in-plane biaxial strain is applied, respectively. Calculations are performed for the biaxial in-plane strain in the range of -5% ∼\sim 5%, in which the positive and negative refer to the tensile and compressive strain, respectively. As shown in Figure 6(a), it indicates that the FM ground state is very robust. Moreover, the MAE varies within a range -0.28 meV to -0.20 meV in the strain [see Figure 6(b)]. The valley splitting went through three stages in the strain [see Figure 6(c, Figure 6d)]. When ε<−2\varepsilon< -2 %, the valley splitting of valence and conduction bands first decrease. Continuing applying the strain in -2% ∼\sim 1%, the valley splitting then increase. When the strain becomes ε>1\varepsilon> 1 % tensile strain, the valley splitting reduces again. In addition, the band structures vary with strain for monolayer Cr2_2COOH MXene is summarized in Figure S6.

Four plots showing relative energy, magnetic anisotropy energy, valence band valley splitting, and conduction band valley splitting as functions of strain

Figure 6. (a) The total energies of Cr2_2COOH different magnetic structures as a function strain, which are defined relative to that of the FM state. (b) The magnetic anisotropy energy as a function of strain. (c) The valence band valley splitting as a function of strain. (d) The conduction band valley splitting as a function of strain.

Ferroelectric substrate tune valley splitting

In order to study valley polarization under the direction of magnetization along the out-of-plane, we investigate that the ferroelectric substrate Sc2_2CO2_2 tune the MAE of monolayer Cr2_2COOH.

MAE of monolayer Cr2_2COOH. We noticed that the 3×3\sqrt{3} \times\sqrt{3} unit cell of Cr2_2COOH is commensurate to the 2 ×\times 2 Sc2_2CO2_2 with a lattice mismatch of less than 1%. We have considered four typical configurations, i.e., the H atom of Cr2_2COOH being in the bridge, hollow, top-O, and top-Sc positions of the Sc2_2CO2_2, respectively, as shown in Figure 7(a) and Figure S7(a-c). As listed in Table SII, the total energy calculations show that the top-O and hollow configurations is the most stable for polarization down and polarization up, respectively. We will focus on these two structures in the following discussion. We found a novel phenomenon. When the monolayer Sc2_2CO2_2 is polarized upward, the spin-polarized band structures of all structures exhibit semiconducting properties [see Figure 7(b), Figure S7(d-f)]. However, for the polarization downward configuration, the band gap is closed under polarization field, as shown in Figure 7(d), and Figure S7(g-i). More importantly, the ferroelectric substrate Sc2_2CO2_2 tune the direction of easy magnetization of Cr2_2COOH from in-plane to out-of-plane (see Table SIII). We also found that the degeneracy between K and K′' valley disappear for polarization upward configuration, when the SOC is included. As shown in Figure 7(c) and Figure S8(a-c), the K′' valley shifts above the K valley in the valence band, while the K′' valley shifts below the K valley in the conduction band. This is the exact opposite of freestanding Cr2_2COOH.

Figure 7. (a) Side views of Cr2_2COOH/Sc2_2CO2_2 heterostructures with the top-O configuration. (b, d) Spin-polarized band structure of Cr2_2COOH/Sc2_2CO2_2 heterostructures for (b) polarization up and (d) polarization down with the top-O configuration, respectively. The blue and magenta lines represent spin up and spin down bands, respectively. (c, e) Band structure with SOC of Cr2_2COOH/Sc2_2CO2_2 heterostructures for (c) polarization up and (e) polarization down with the top-O configuration, respectively.

Conclusion

In conclusion, we propose a novel 2D valleytronic material in monolayer Cr2COOH\mathrm{Cr}_2\mathrm{COOH} MXene based on first-principles calculation. We find that monolayer Cr2COOH\mathrm{Cr}_2\mathrm{COOH} MXene is a FM semiconductor with the abundant valley physics. In contrast to 2D valleytronic systems reported in previous works, the valley polarization is sizeable in both the valence and conduction bands. This sizeable valley polarization is in favor of realizing the AVHE in monolayer Cr2COOH\mathrm{Cr}_2\mathrm{COOH} MXene. Moreover, it is found that the valley splitting can be modulated by the magnetization direction, strain and ferroelectric substrate. When the monolayer Sc2CO2\mathrm{Sc}_2\mathrm{CO}_2 is polarized upward, the system exhibit valley polarized semiconductor. However, for the polarization downward configuration, the band gap is closed under polarization field. Our work provides not only a unique 2D valleytronic materials but also efficient avenues to tune valley polarization.

Acknowledgements

This work is supported by the National Natural Science Foundation of China (Grant No. 12004295). P. Li thanks China’s Postdoctoral Science Foundation funded project (Grant No. 2022M722547), and the Open Project of State Key Laboratory of Surface Physics (No. KF2022_09).

References

  1. [1]D. Xiao, W. Yao, and Q. Niu, Phys. Rev. Lett. 99, 236809 (2007).
  2. [2]T. Cao, G. Wang, W. Han, H. Ye, C. Zhu, J. Shi, Q. Niu, P. Tan, E. Wang, B. Liu, and J. Feng, Nat. Commun. 3, 887 (2012).
  3. [3]K. F. Mak, K. He, J. Shan, and T. F. Heinz, Nat. Nanotechnol. 7, 494 (2012).
  4. [4]H. Zeng, J. Dai, W. Yao, D. Xiao, and X. Cui, Nat. Nanotechnol. 7, 490 (2012).
  5. [5]D. Xiao, G. B. Liu, W. Feng, X. Xu, and W. Yao, Phys. Rev. Lett. 108, 196802 (2012).
  6. [6]Y. Li, J. Ludwig, T. Low, A. Chernikov, X. Cui, G. Arefe, Y. D. Kim, A. M. Van Der Zande, A. Rigosi, H. M. Hill, S. H. Kim, J. Hone, Z. Li, D. Smirnov, and T. F. Heinz, Phys. Rev. Lett. 113, 266804 (2014).
  7. [7]G. Aivazian, Z. Gong, A. M. Jones, R. L. Chu, J. Yan, D. G. Mandrus, C. Zhang, D. Cobden, W. Yao, and X. Xu, Nat. Phys. 11, 148 (2015).
  8. [8]D. MacNeill, C. Heikes, K. F. Mak, Z. Anderson, A. Komanyos, V. Zolyomi, J. Park, and D. C. Ralph, Phys. Rev. Lett. 114, 037401 (2015).
  9. [9]A. Srivastava, M. Sidler, A. V. Allain, D. S. Lembke, A. Kis, and A. Imamoglu, Nat. Phys. 11, 141 (2015).
  10. [10]P. Li, B. Liu, W. X. Zhang, and Z. X. Guo, arXiv:2309.01305.
  11. [11]H. Huan, Y. Xue, B. Zhao, G. Gao, H. Bao, and Z. Yang, Phys. Rev. B 104, 165427 (2021).
  12. [12]M. Naguib, V. N. Mochalin, M. W. Barsoum, and Y. Gogotsi, Adv. Mater. 26, 992 (2014).
  13. [13]N. C. Frey, J. Wang, G. I. Vega Bellido, B. Anasori, Y. Gogotsi, and V. V. Shenoy, ACS Nano 13, 3031 (2019).
  14. [14]Y. Gogotsi, and B. Anasori, ACS Nano 13, 8491 (2019).
  15. [15]G. Deysher, C. E. Shuck, K. Hantanasirisakul, N. C. Frey, A. C. Foucher, K. Maleski, A. Sarycheva, V. B. Shenoy, E. A. Stach, B. Anasori, and Y. Gogotsi, ACS Nano 14, 204 (2020).
  16. [16]M. Han, K. Maleski, C. E. Shuck, Y. Yang, J. T. Glazar, A. C. Foucher, K. Hantanasirisakul, A. Sarycheva, N. C. Frey, S. J. May, V. B. Shenoy, E. A. Stach, and Y. Gogotsi, J. Am. Chem. Soc. 142, 19110 (2020).
  17. [17]X. Feng, Z. He, R. Peng, Y. Dai, B. Huang, and Y. Ma, Phys. Rev. Mater. 6, 044001 (2022).
  18. [18]H. Weng, A. Ranjbar, Y. Liang, Z. Song, M. Khazaei, S. Yunoki, M. Araújo, Y. Kawazoe, Z. Fang, and X. Dai, Phys. Rev. B 92, 075436 (2015).
  19. [19]V. Kamysbayev, A. S. Filatov, H. Hu, X. Rui, F. Lagunas, D. Wang, R. F. Klie, and D. V. Talapin, Science 369, 979 (2020).
  20. [20]W. Y. Tong, S. J. Gong, X. Wan, C. G. Duan, Nat. Commun. 7, 13612 (2016).
  21. [21]Z. He, R. Peng, X. Feng, X. Xu, Y. Dai, B. Huang, and Y. Ma, Phys. Rev. B 104, 075105 (2021).
  22. [22]K. Wang, Y. Li, H. Mei, P. Li, and Z. X. Guo, Phys. Rev. Mater. 6, 044202 (2022).
  23. [23]Q. Xue, X. Mu, Y. Sun, and J. Zhou, Phys. Rev. B 107, 245404 (2023).
  24. [24]P. Li, X. Yang, Q. S. Jiang, Y. Z. Wu, and W. Xun, Phys. Rev. Mater. 7, 064002 (2023).
  25. [25]M. Rybak, P. E. Faria Junior, T. Wozniak, P. Scharoch, J. Fabian, and M. Birowska, arXiv:2308.13109.
  26. [26]G. Kresse, and J. Hafner, Phys. Rev. B 47, 558 (1993).
  27. [27]G. Kresse, and J. Furthmuller, Phys. Rev. B 54, 11169 (1996).
  28. [28]G. Kresse, and D. Joubert, Phys. Rev. B 59, 1758 (1999).
  29. [29]J. P. Perdew, K. Burke, and M. Ernzerhof, Phys. Rev. Lett. 77, 3865 (1996).
  30. [30]P. Li, X. S. Zhou, and Z. X. Guo, npj Comput. Mater. 8, 20 (2022).
  31. [31]A. Togo, F. Oba, and I. Tanaka, Phys. Rev. B 78, 134106 (2008).
  32. [32]D. Bucher, L. C. T. Pierce, J. A. McCammon, and P. R. L. Markwick, J. Chem. Theory Comput. 7, 890 (2011).
  33. [33]S. Nose, Mol. Phys. 52, 255 (1984).
  34. [34]S. Nose, J. Chem. Phys. 81, 511 (1984).
  35. [35]N. Marzari and D. Vanderbilt, Phys. Rev. B 56, 12847 (1997).
  36. [36]Y. Yao, L. Kleinman, A. H. MacDonald, J. Sinova, T. Jungwirth, D. S. Wang, E. Wang, and Q. Niu, Phys. Rev. Lett. 92, 037204 (2004).
  37. [37]X. Wang, J. Yates, I. Souza, and D. Vanderbilt, Phys. Rev. B, 74, 195118 (2006).
  38. [38]D. J. Thouless, M. Kohmoto, M. P. Nightingale, and M. den Nijs, Phys. Rev. Lett. 49, 405 (1982).
  39. [39]A. D. Becke, and K. E. Edgecombe, J. Chem. Phys. 92, 5397 (1990).
  40. [40]N. Sivadas, S. Okamoto, X. Xu, C. J. Fennie, and D. Xiao, Nano Lett. 18, 7658 (2018).
  41. [41]A. M. Leon, J. W. Gonzalez, J. Mejia-Lopez, F. Crasto de Lima, and E. Suarez Morell, 2D Mater. 7, 035008 (2020).
  42. [42]B. Goodenough, Phys. Rev. 100, 564 (1955).
  43. [43]J. Kanamori, J. Phys. Chem. Solids 10, 87 (1959).
  44. [44]P. W. Anderson, Phys. Rev. 115, 2 (1959).
  45. [45]D. Wang, and R. Wu, Phys. Rev. B 47, 14932 (1993).
  46. [46]J. Hu, and R. Wu, Phys. Rev. Lett. 110, 097202 (2013).
  47. [47]L. R. Bickford, Phys. Rev. 119, 1000 (1960).
  48. [48]B. Huang, W. Y. Liu, X. C. Wu, S. Z. Li, H. Li, Z. Yang, and W. B. Zhang, Phys. Rev. B 107, 045423 (2023).
  49. [49]H. X. Cheng, J. Zhou, W. Ji, Y. N. Zhang, and Y. P. Feng, Phys. Rev. B 103, 125121 (2021).
  50. [50]T. Liu, D. Xiang, H. K. Ng, Z. Han, K. Hippalgaonkar, A. Suwardi, J. Martin, S. Garaj, and J. Wu, Adv. Sci. 9, 2200816 (2022).
  51. [51]Q. Liu, P. Li, Z. Guo, G. Dong, B. Peng, X. Zha, T. Min, Z. Zhou, and M. Liu, Nat. Commun. 13, 1650 (2022).

Paper details

vlnc:W_gm3npbs8
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 10

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents