WorksPhysics and Astronomy
The tilted-plane structure of the energy of finite quantum systems
Abstract
The piecewise linearity condition on the total energy with respect to the total magnetization of finite quantum systems is derived, using the infinite-separation-limit technique. This generalizes the well-known constancy condition, related to static correlation error, in approximate density functional theory (DFT). The magnetic analog of the DFT Koopmans' theorem is also derived. Moving to fractional electron count, the tilted plane condition is derived, lifting certain assumptions in previous works. This generalization of the flat plane condition characterizes the total energy surface of a finite system for all values of electron count N and magnetization M. This result is used in combination with tabulated spectroscopic data to show the flat plane-structure of the oxygen atom, among others. We find that derivative discontinuities with respect to electron count sometimes occur at non-integer values. A diverse set of tilted plane structures is shown to occur in d-orbital subspaces, depending on chemical coordination. General occupancy-based total-energy expressions are demonstrated thereby to be necessarily dependent on the symmetry-imposed degeneracies.
Density Functional Theory (DFT), a workhorse of computational chemistry and condensed matter physics [1, 2, 3], owes its success to the development of relatively efficient, reliable and accurate approximations to the exchange-correlation (XC) functional [4, 5, 6, 7, 8, 9, 10, 11]. These approximations can be developed by enforcing exact conditions and appropriate norms on a functional of given mathematical form [12]. Two well-known such exact conditions are the piecewise linearity condition with respect to electron count [13] and the constancy condition with respect to spin-magnetization (henceforth referred to as magnetization for concision) [14, 15] that, as we will discuss, is a special case of a more general linearity condition. The former condition states that the total ground state energy of a system with external potential and electron count is given by
where and [13, 14, 16]. A DFT calculation for a finite system with a non-integer electron count necessitates fractional occupancy of at least one Kohn Sham (KS) orbital. Assuming this fractional occupancy is limited to one KS orbital, the slope of the linear segment of the curve is given by
where is the fractionally occupied KS eigenvalue [17, 18, 19, 20]. A derivative discontinuity must therefore occur at integer values of electron count [21, 22, 23, 24, 25, 26], at least. The left-hand partial such derivative is given by the highest occupied KS eigenvalue. The right-hand partial derivative is given by the lowest unoccupied KS eigenvalue, , with an additional contribution from the derivative discontinuity of the exact XC functional, that is by
The piecewise linearity condition with respect to electron count [13], as given by Eq. (1), follows from the convexity condition [27], namely that
The second of the two aforementioned exact conditions is the constancy condition with respect to magnetization [14, 15], which states that the total ground state energy of a system with electron count and magnetization satisfies, for any magnetization ,
Here, is the maximum magnetization of the lowest-energy state for a given integer electron count . denotes the ground state energy of the system with specified electron count and magnetization , noting that these are independent parameters in DFT, subject to . Here, and in what follows, it is supposed that no ambient field coupling to spin is present.
The linearity and constancy conditions given by equations 1 and 5 have been combined and generalized [14, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37] to give the flat plane condition
for , where and is the maximum magnetization of the lowest-energy state for the electron system.
Many approximate XC functionals violate these exact conditions, and this failure has been directly linked to poor performance in the prediction of band gaps [38, 39, 40], molecular dissociation [41] [42, 43, 44], and electronic transport [45]. A small number of functionals enforce, fully or to some extent, the flat plane condition [37] [46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56].
It has long been recognised in the literature that the constancy condition with respect to magnetisation and the accompanying flat-plane condition apply only to the aforementioned limited interval of magnetization states. In previous works to generalize this, X. Yang et al. [36] proposed the existence of two types of flat planes, for example, and Gál and Geerlings [34] proposed a piecewise linearity condition for magnetization by invoking a zero-temperature grand canonical ensemble.
In this Letter, we rigorously classify the surface for all values of magnetization , as opposed to the limited interval , across all formulations of DFT that satisfy three minimum requirements. These are that the total energy functional is (a) exact for all -representable spin-densities, (b) size-consistent, which is connected to the idea of near-sightedness, and (c) translationally invariant. We derive a piecewise linearity condition with respect to magnetisation (Thm. 1) and an accompanying, general ‘tilted plane’ condition (Thm. 2). A tilted plane may have a non-zero partial derivative with respect to both and , while a flat plane (as defined by Eq. 6) can only have a non-zero partial derivative with respect to . In certain cases only, the tilted plane simplifies to the well-known flat plane.
Thms. 1 & 2 are exact conditions for the XC functional, and so may inform and stimulate the development of improved XC approximations. They highlight the opportunity for functionals that incorporate explicit derivative discontinuities with respect to electron count and magnetization . Thm. 1 opens a new avenue for incorporating spin-polarised atomic reference data as guidance for spin-polarized functional generalizations [57–59]. Furthermore, these two theorems demonstrate that occupancy-based functionals, such as in DFT+U type methods [46, 47, 49, 60–63] and certain machine-learning based methods [64–66], might beneficially take on different analytical expressions depending on symmetry-imposed degeneracies, as we approach exactitude.
In SM IV, Corollary 1.1 provides the analogue of the DFT Koopmans’ condition for spin, i.e., an exact condition on the spin-splitting of the effective (e.g., Kohn-Sham) potential. In spin-polarized systems, this splitting underpins the prediction of magnetic excitations and exchange couplings from a DFT starting point.
Thm. 2 classifies the curve for all values of magnetisation . Higher-energy magnetisation states are the subject of inherent interest and intense research. For example, the lowest energy triplet state plays a crucial role in phosphorescence [67, 68], thermally activated delayed fluorescence [69, 70] and singlet fission [71, 72]. Within spin-DFT, such higher energy magnetization states are accessible, as one may compute the lowest energy state of each symmetry [73].
Theorem 1. The curve is piecewise linear with respect to magnetization .
The structure of the curve (where ) can be elucidated by employing the technique, developed in W. Yang et al. [14], of constructing a system with external potential that is composed of copies of the same finite system with external potential , with all copies being infinitely separated in space. The duplication of the system, at infinite separation, is a theoretical device used to consider its possible fractional charge and spin, without resorting to an ensemble treatment. The proof proceeds by analysing the overall system of duplicates, however it is the individual finite sub-system (which may be strongly multi-reference in character) with which we are ultimately concerned. We have that
The total electron count is denoted by , where . It follows from the convexity condition that, at the infinite separation limit, electrons will localize on each of the sites. For brevity, we will not repeat the electron count constraint , but note that it holds throughout Thm. 1 and Cor. 1.1. The total magnetization of the system is denoted by , where and . Typically, but (which is supposed to be sufficiently dense in for present purposes). The ground state of the system will be composed of sites with a magnetization , and sites with a magnetization , where
For fixed values of the external parameters and , the total number of sites is chosen, together with the minimum and maximum , such that the total energy per site is minimized while satisfying the constraints of Eq. (7). Often one finds , but not always. For example, in the nitrogen atom and for . The choice of and is discussed further in SM I.
One of the degenerate ground state wave functions of the system will consist of sites with magnetisation and sites with magnetisation . As we describe in detail in SM II, we may take the average of all such ground state wave functions, and analyse the associated spin-resolved site electron density. The piecewise linearity condition for magnetisation, i.e.,
thereby follows for all total energy functionals that are (a) exact for all -representable spin-densities, (b) size-consistent, and (c) translationally invariant.
We note that Gál and Geerlings [34] arrived at a similar piecewise linearity condition for magnetization by invoking a zero-temperature grand canonical ensemble.
Approximate total energy functionals typically do not obey the piecewise linearity condition with respect to magnetization. We may refer to the intrinsic deviation of from the piecewise linear curve, between the (often inexact) energies at integer magnetization, as magnetic piecewise linearity error (MPLE),
Here the electron count is a constant integer value and , , and are given by equation S11. Figure 1 shows the for the neutral helium atom.
Figure 1. The magnetic piecewise linearity error (MPLE) for the neutral Helium atom exhibited by a variety of local [74], semi-local [5] [75], hybrid [7, 8, 9] [76] and van der Waals corrected [77] XC functionals, as well as Hartree-Fock (HF). As defined in Eq. (9), the MPLE for each approximate functional vanishes at certain integer values of spin-magnetization. MLPE exhibits a substantial cubic component for all functionals shown. It approximately vanishes near full magnetization (but not elsewhere) for the hybrid functionals, reflecting the negative sign of MPLE for HF in this test system and hence cancellation of error [78]. Calculation details [79–81] can be found in SM III.
MPLE differs from static correlation error (SCE) [15] [82], which is defined as the spurious difference in total energy, due to the use of an approximate XC functional, between states that should be degenerate. MPLE instead is an error in the total energy of non-integer magnetization states, irrespective of whether such a state should be degenerate with one with integer magnetization. It would not be so, typically, in tilted-plane regions, or in a finite external magnetic field. Conversely, not all SCE can be described as MPLE, because SCE may refer to spurious energy differences between states of the same magnetization. An example of an SCE that is not an MPLE is the energy error that may arise in the description of the spherically symmetric boron atom [15].
Corollary 1.1. The partial derivative of the curve with respect to magnetization is equal to half the difference between the spin-dependent frontier KS eigenvalues , whenever the partial derivative exists,
A simple proof of this corollary is given in SM IV (see also references [24, 28, 34] [83, 84, 85, 86] therein), which avoids the need to invoke total single-particle energies or grand canonical ensembles.
Theorem 2. The surface obeys the tilted plane condition described by Eq. (13).
Analysis of the curve may be extended to include states with not only fractional magnetization but also fractional electron count . Again, one may construct an external potential given by Eq. (6), in this case typically both and , such that the total system electron count and magnetization, and . The ground state of this system will be composed of sites with electron count and magnetization , where ranges from 1 to with:
The values of , and are constrained so that
Following an analogous derivation to that outlined in Thm. 1 (inc. SM I and II), one finds that, for ,
Vertices in the energy landscape will occur at the specified integer values of electron count and magnetization . is the number of vertices associated with a particular plane, typically equal to 3 or 4, however higher numbers of vertices are possible in very rare circumstances, as discussed in SM V. To simplify discussion, we restrict , however, the method used to generate Figure 2 includes no restriction on .
!Projection of the surfaces of oxygen, chromium, manganese, and iron atoms onto the plane bbox=0.08,0.07,0.92,0.48
Figure 2. The projection of the surface of the oxygen, chromium, manganese and iron atoms onto the plane. The curves are composed of a series of three- and four-sided planes with vertices at integer values of and . (The vertical axis is labelled in terms of the total atomic charge as opposed to total electron count.) The total energy varies linearly across each plane. Each plane is outlined in black. Energy contour lines are plotted at intervals of eV. For each atom, the total energy values are based on available experimental NIST reference data [87] and are given relative to the ground state total energy of the neutral atom in its lowest energy magnetization state, which is set to 1 eV for visualization purposes. Orbital and nuclear moments are not included. The surface of the oxygen atom for charged states between and is composed of a series of five triangular shaped planes, four of which can neither be classed as a type 1 or a type 2 flat plane of X. Yang et al. [36]. Note that planes at the edges are omitted due to absence of experimental reference data. If any additional experimental reference data points not currently included are found to be low enough in energy, they could also affect the shape of the outlying, high-magnetization surfaces shown here.
In cases where the electron counts of the four states at the vertices satisfy and the magnetizations , , with , Eq. (13) simplifies to the flat-plane condition as outlined in Eq. 6. X. Yang et al. [36] and Cuevas-Saavedra et al. [37] report the existence of two types of flat plane structures. These types are special cases (non-exhaustive ones; see Figure 2 for an exception) of the more general condition outlined by Eq. (13), specifically when . Generally, restricting to be zero prohibits the correct flat plane structure of systems, e.g., the oxygen atom for and , as highlighted in white in Figure 2. The correct expression for this energy surface is detailed in SM VI, along with further analysis of Figure 2.
Gál and Geerlings [34] reported the existence of a tilted plane energy surface but their energy expressions also have the restriction, meaning that values in their energy expression will not always represent vertices in the energy landscape. The same is true for Chan’s energy expression [28]. To the best of our knowledge, a lifting of the restriction of the generalized flat plane condition has only been discussed to date in the unpublished Ref. [35]. If we assume that values represent vertices in the energy landscape, the restriction allows for triangular shaped planes but neglects planes of other shapes, such as isosceles trapezoids, which occur in the oxygen atom (Figure 2).
A consequence worthy of future investigation is the appearance of derivative discontinuities both at non-integer values of total electron count , and of spin-electron count , as seen, e.g., in the oxygen atom between charge states and with (Figure 2). Knowledge of the occurrence of a tilted plane energy surface has already been applied to correct the PBE total energy of dissociated triplet in Ref. [46]. An analysis of the tilted plane shape of the surface for the He atom is shown in SM III and the surface for the multi-reference, quintuple bonded VCr, VMo and CrMo hetero-dimers [88] are presented in SM VII. Sample degeneracy-dependent tilted plane structures for an isolated -orbital subspace are shown in SM VIII.
In conclusion, the piecewise linearity condition with respect to magnetization and the tilted plane condition were derived from first principles using the infinite-separation-limit technique, and the magnetic analogue of the DFT Koopmans’ theorem was derived from the chain rule. These exact conditions have been derived for all formulations of DFT that are exact for all -representable spin-densities, size-consistent, and translationally invariant. It is important to note that these exact conditions apply only to the lowest energy surface. By performing a constrained search over states of a specified spin multiplicity [73], it is possible to access other quantum states within DFT that are not located on this energy surface, for example, the lowest energy singlet state of a system with a triplet ground state.
We have found that many standard density functional approximations violate these exact conditions. These three exact quantum mechanical conditions may aid in the development of post-DFT methods and functional approximations, machine learning and alchemical approaches in both condensed matter physics and quantum chemistry, and error-correction techniques involving total energies in quantum science. We find that in order to approach the exact limit, energy functionals of occupancies must necessarily take different forms depending on symmetry-imposed degeneracies.
Acknowledgments
The research conducted in this publication was funded by the Irish Research Council under grant number GOIPG/2020/1454. EL gratefully acknowledges financial support from the Swiss National Science Foundation (grant number 213082). This research was supported by the NCCR MARVEL, a National Centre of Competence in Research, funded by the Swiss National Science Foundation (grant number 205602).
References
SM-I. The correct choice of site magnetizations
In the derivation of the piecewise linearity condition for magnetization, care must be taken in determining the site magnetizations and . Here we have given values of the external parameters and , where and are, respectively, the total electron count and the total magnetization of the system composed of infinitely separated sites. The minimum and maximum values which minimize the total energy per site, while satisfying the constraint of Eq. (7), are determined by the following three conditions.
The site magnetizations and must satisfy
For any values of site magnetization where , the ground-state energy of the system with magnetization must satisfy
The equivalent condition for must also be true.
For any integer value of site magnetization in the range , the ground-state energy must satisfy
Thus, the same values of and will satisfy these criteria for all values of the external parameter that satisfy Eq. (14).
SM-II. The Piecewise Linearity Condition for Magnetization
Given a system of infinitely separated sites with total electron count and magnetization , where the ground state of the system is composed of sites with a magnetization , and sites with a magnetization , subject to the constraints of Eq. (7) in the main text, we explicate in full the proof of Eq. (8) in the main text, which specifies the piecewise linearity condition for magnetization. The correct choice in values of and have already been discussed in SM-I.
The system has a set of degenerate ground state wave functions. At least one of these degenerate wave functions will be the antisymmetrized product of ground state wave functions at each site [14, 16]. This follows because in the infinite separation limit, each site cannot interact with its neighbours and, thus, minimizing the energy of the total system is equivalent to separately minimizing the energy associated with each site subject to the constraints of Eq. (7). One such ground state will have the first sites with magnetization and wave function , and the remaining sites with magnetization and wave function . The ground state wave function of the total system is
It is important to note that the ground state wave function of Eq. (17) holds regardless of whether each finite sub-system can be well-described by a single-determinant wave function or not.
Exchanging the magnetizations and at any two sites results in a degenerate ground state wave function. Therefore, the average of all such wave functions is also a ground state wave function of the system. The ground state spin density of is given by
where is the spin spin density of site with a magnetization of . In this case, each of the (and separately ) sites have identical spin-resolved densities. We emphasize that Eq. (18) is one of the degenerate ground state spin densities of the system with total magnetization , where is the number of sites and is limited to the interval .
To deduce the piecewise linearity condition for magnetization, we make three reasonable assertions about the nature of the total energy functional, namely that it is (a) exact for all -representable spin-densities, (b) size-consistent, and (c) translationally invariant. We expect that the exact functional satisfies these in all DFT formulations where the ground state is generally accessible.
From (a), the total energy function should be exact for the spin resolved density of Eq. (18), so that
From (b), the total energy functional should be size-consistent, whereupon
Eq. (20) can be simplified by application of (c), translational invariance, following which
From Eqs. (19) and (21), the total energy of the isolated site with magnetization is given by
where the site magnetization is given by
An equivalent argument will hold for any value of in the range . Making the change of variable and relabelling the site potential simply as , we may succinctly state that
Therefore, a spin density functional satisfying the three aforementioned conditions obeys a piecewise linearity condition with respect to magnetization, as opposed to simply a constancy condition.
Helium atom at Fractional Magnetization
It is instructive to apply our analysis on the helium energy surface at fractional values of and . The surface for the helium atom with electron count in the range and magnetization is given by
This plane will have a non-zero partial derivative with respect to magnetization and thus has a ‘tilted plane’ shape as opposed to a simple ‘flat plane’ shape. Approximate XC functionals typically do not obey the tilted plane condition. For example, Figure S1 displays the energy of the helium atom when using the PBE XC functional, with respect to the exact tilted plane outlined in Eq. (25).

Figure S1. A plot of the deviation of the total energy using the PBE XC functional from the tilted plane condition for the Helium atomic system with spin up and spin down electron counts in the range and , assuming the PBE total energy is exact at integer values of and .
All DFT calculations on the helium atom, as presented also in Figure 1 of the main text, were performed using the pw.x code of the Quantum Espresso package [79]. Kintetic-energy cutoffs of 75 Ry and 300 Ry were set for the Kohn Sham wavefunctions and charge density, respectively. Martyna-Tuckerman periodic boundary corrections [80] were applied, along with a Gaussian occupancy smearing of 0.02 Ry. Davidson diagonalization was employed with Broyden charge density mixing, a mixing factor of 0.7, and a convergence threshold of Ry. The helium atom was positioned in the centre of a
Å cell, with Γ-point only reciprocal space sampling. The Optimized Norm-Conserving Vanderbilt helium pseudopotential [81] from the SG15 collection was used, which is available at www.quantum-simulation.org. In the case of Hartree-Fock, B3LYP, HSE and PBE0, the fully magnetized () helium calculations would not converge. In this case, the total energy at was evaluated by linear extrapolation of the total energies from the , & calculations.
The magnetic analogue of the DFT Koopmans’ theorem
Corollary 1.1. The partial derivative of the curve with respect to magnetization is equal to half the difference between the spin-dependent frontier KS eigenvalues , whenever the partial derivative exists.
The magnetic analogue of the DFT Koopmans’ theorem can be derived by simple application of the chain rule in conjunction with the well studied (spin resolved) DFT Koopmans’ theorem. This dispenses with the need to invoke total single particle energies or grand canonical ensembles used in previous proofs [34] [84] of this theorem. The partial derivative of the total energy with respect to magnetization may be expressed in terms of the spin resolved electron counts
whenever the necessary partial derivatives exist. The right and left partial derivatives of with respect to are given, respectively, by
and
where is the highest occupied spin- KS eigenvalue and is the lowest unoccupied spin- KS eigenvalue. is the explicit derivative discontinuity of the exact XC functional through its explicit dependence on . Eq. (27) is the spin resolved analogue of Eqs. [(2)] and [(3)]. For further details, see Refs. [24, 28] [85, 86, 87].
The right and left partial derivatives of the total energy with respect to magnetization of a system with no fractional KS orbital occupations is thus given by
and
since the partial derivative of with respect to is equal to one half. For systems with one fractionally occupied spin up frontier KS orbital of eigenvalue , and one fractionally occupied spin down one of eigenvalue , the expression given by Eq. (28) simplifies to
Typical XC functionals will break this exact condition. In Figure S2 the slope of the curve for the Helium atom, as evaluated from the PBE KS eigenvalues, is plotted as a function of magnetization. Use of the exact XC functional would result in a perfect step function.
Figure S2. Half the difference of the fractionally occupied KS eigenvalues for the He atom, plotted as a function of magnetization , for a variety of local [74], semi-local [5] [75], hybrid [7, 8, 9] [76] and van der Waals corrected XC functionals [77], as well as Hartree-Fock (HF). The exact constant line, based on experimental NIST reference data [88], is also displayed. The lack of a derivative discontinuity within certain XC approximations can result in very large deviations from the magnetic analogue of Koopmans’ theorem at certain integer values of , as is the case shown here for the PBEsol, PBE and RVV10 functionals at . As discussed in SM-III, the hybrid functionals as well as Hartree-Fock were evaluated at , & but not at .
Cases of high vertex count
In special cases, the vertex count of a given plane can be higher than four. For example, let us assume that the maximum magnetization of the lowest energy state of the , and electron systems are given by , , and , respectively, where . It is assumed that the convexity condition of Eq. (4) is satisfied for the , and electron systems. In the special case where
the plane in question will have an hexagonal shape (stretched in the magnetization direction whenever $M > Such a plane would require the summation in Eq. (13) to be extended over six vertices
Higher numbers of vertices will occur when there is a fortuitous equality of certain energy derivatives. Eq. (30) specifies the energy derivative equality for this particular example. It is worth noting that Eq. (30) simplifies to
however this simplification will not occur in all cases of high vertex count.
SM-VI. Further Analysis of Figure 2
A number of other interesting observations can be made from Figure 2 in the main text, for simplicity we have included the same figure here, labelled Figure S3. If we look, for example, at the 5+ oxygen anion, we can read from the graph that the energy is minimized at (the spin-doublet configuration ), with a piecewise constant segment for , while the next lowest magnetization state is (the spin-quartet configuration ), with piecewise linear (not piecewise constant) segments connecting these for .
!Projection of the surfaces of oxygen, chromium, manganese, and iron onto the plane bbox=0.0875,0.239,0.875,0.535
Figure S3. The projection of the surface of the oxygen, chromium, manganese and iron atoms onto the plane. The curves are composed of a series of three- and four-sided planes with vertices at integer values of and . (The vertical axis is labelled in terms of the total atomic charge as opposed to total electron count.) The total energy varies linearly across each plane. Each plane is outlined in black. Energy contour lines are plotted at intervals of . For each atom, the total energy values are based on available experimental National Institute of Standards and Technology reference data [88] and are given relative to the ground state total energy of the neutral atom in its lowest energy magnetization state, which is set to 1 eV for visualization purposes. Orbital and nuclear moments are not included. The surface of the oxygen atom for charged states between +5 and +6 is composed of a series of five triangular shaped planes, four of which can neither be classed as a type 1 or a type 2 flat plane of X. Yang et al. [36]. Within this region, the energy surface has been incorrectly produced by Gál and Geerlings in Fig. 3 of their work [34], highlighting the challenge of mapping these planes. Note that planes at the edges are omitted due to absence of experimental reference data. If any additional experimental reference data points not currently included are found to be low enough in energy, they could also affect the shape of the outlying, high-magnetization surfaces shown here. The flat plane described by Eq. (33) is highlighted in white.
It is also worth noting that the neutral chromium atom violates the Madelung rule, with a ground state electron configuration of . This can been seen in the central uppermost plane of the surface for Cr, which extends from to at zero charge as opposed to to , which would be the case if the configuration followed the Madelung rule ().
The correct energy expression for the oxygen atom, without the restriction, may be written as
for all and . The flat plane described by Eq. (33) is highlighted in white in Figure S3.
Despite and for the oxygen atom, reduction of Eq. (33) to the sum of two terms with coefficients and would wrongly give
The black lines within the surfaces of Figure 2 (Figure S3), correspond to values of & where derivative discontinuities in the total energy occur. As shown in the surface of the oxygen atom, these derivative discontinuities do not solely occur at integer values of & , or at integer values of the spin up and spin down electron counts ( and ).
For example, there is a line segment stretching from the point to the point . This line represents a ‘seam’ which, in this case, both of the partial derivatives change. Thus, there is a derivative discontinuity in the total energy for all values of total charge (8 being the atomic number of oxygen) and total magnetization on this line segment. The equation of the line segment is , and so derivative discontinuities occur, e.g., at and as well as at the integer magnetization and . This discontinuity (for varying at constant ) has a magnitude of approximately 10.2 eV.
This example also provides that a derivative discontinuity may be encountered while one spin occupancy alone is varied, at possibly non-integer values. Recall that the spin-indexed occupancies are given by and . We may consider traversing from point (which corresponds to and ) to point (which corresponds to and . A derivative discontinuity is encountered at half-integer filling , which is at the aforementioned point , half-way along the line segment. It is worth noting that there appears to be no possible absent NIST spectroscopic data in the region in question that might correspond to higher-energy spin states, the existance of which might otherwise change the fracturing of the landscape and affect this prediction.
SM-VII. surface of sample transition metal hetero-dimers
The projection of the surface onto the plane for the strongly correlated CrMo, VCr and VMo transition metal hetero-dimers are presented in Figure S4. In particular, please note that the surfaces are composed of a series of three and four sided planes with vertices at integer values of and , as is the case with the oxygen, chromium, manganese and iron atoms. The total energy varies linearly across each plane but, for ease of visualization, each plane is colored based on the average of the energies at the vertices. The total energy values for the strongly correlated CrMo, VCr and VMo transition metal hetero-dimers are based on CASSCF/CASPT2 reference calculations on vertical excitations from Ref. [89]. This study classified the ground state of each dimer, in both the neutral and anionic state, as having a pronounced multi-reference character, as well as an effective bond order indicative of a quintuple bond.
!Projection of the surface onto the plane for the CrMo, VCr, and VMo hetero-dimers bbox=0.08,0.07,0.48,0.34
Figure S4. The projection of the surface onto the plane for the CrMo (A), VCr (B) and VMo (C) hetero-dimers based on CASSCF/CASPT2 reference calculations for vertical charge and spin excitations [89]. The y-axis is labelled in terms of total charge as opposed to total electron count.
For each system, the total energy values are relative to the ground state total energy of the neutral dimer in its lowest energy magnetization state. Note that only a subset of the full surface is presented for these systems, this is due to the limited data available. If any additional reference data points not currently included are found to be low enough in energy, they could also affect the shape of the surfaces shown here.
SM-VIII. Model crystal/ligand field-dependent tilted plane structures for a d-orbital subspace
The energies of localized electronic states within a solid material also obey the tilted plane condition in the limit where the subspace-bath interaction energy varies linearly with spin resolved occupancy. This of course includes the case where the subspace-bath interaction becomes negligible. Figure S5 displays sample tilted plane structures for a -orbital subspace in the subspace-bath linear interaction limit under octahedral, tetrahedral, and square-planar crystal field splittings. The total energy of the electronic states with integer spin-resolved orbital occupancies were approximated using the model

Figure S5. Sample tilted plane structures for a -orbital subspace in the subspace-bath linear interaction limit, under octahedral (A), tetrahedral (B) and square-planar (C) crystal field splittings. In the model energy (see Eq. (35)), parameters were chosen to show a sample of the the rich coordination-dependence of flat plane shapes. The interaction parameters and were set at 11 eV and 10 eV, respectively, and the orbital energy levels were chosen so that eV. The set of orbital energy levels , and , in eV, were used for the octahedral, tetrahedral and square-planar crystal fields, respectively. The total energy varies linearly across each plane but, for ease of visualization, each plane is colored based on the average of the energies at the vertices. In each example, the energies are reported relative to the plane with lowest average energy, whose energy was set to 1 eV to allow a logarithmic color scale.
where and are the intra-orbital and inter-orbital interaction parameters, respectively. The values and are the energy level and spin- electron count, respectively, of orbital . For each crystal field splitting, and hence degeneracy pattern, a wide variety of possible tilted plane structures exist. Total-energy approximations defined for non-integer spin-occupancies arise in a wide variety of DFT-related methods, e.g., in DFT+ type XC-corrections and in machine learning proxies for total-energy components. These and perhaps next-generation XC approximations, as we approach exactitude, could beneficially (recalling Figure S5 (a) change expressions discretely between different tilted-plane segments, and (b) change in the manner of that change, depending on symmetry-imposed degeneracy patterns.
References
- [1]P. Hohenberg and W. Kohn, Phys. Rev. 136, B864 (1964).
- [2]W. Kohn and L. J. Sham, Phys. Rev. 140, A1133 (1965).
- [3]A. M. Teale, T. Helgaker, A. Savin, C. Adamo, B. Aradi, A. V. Arbuznikov, P. W. Ayers, E. Jan Baerends, V. Barone, P. Calaminici, E. Cances, E. A. Carter, P. Kumar Chattaraj, H. Chermette, I. Ciofini, T. Daniel Crawford, F. D. Proft, J. F. Dobson, C. Draxl, T. Frauenheim, E. Fromager, P. Fuentealba, L. Gagliardi, G. Galli, J. Gao, P. Geerlings, N. Gidopoulos, P. M. W. Gill, P. Gori-Giorgi, A. Görling, T. Gould, S. Grimme, O. Gritsenko, H. J. Aagaard Jensen, E. R. Johnson, R. O. Jones, M. Kaupp, A. M. Köster, L. Kronik, A. I. Krylov, S. Kvaal, A. Laestadius, M. Levy, M. Lewin, S. Liu, P.-F. Loos, N. T. Maitra, F. Neese, J. P. Perdew, K. Pernal, P. Pernot, P. Piecuch, E. Rebolini, L. Reining, P. Romaniello, A. Ruzsinszky, D. R. Salahub, M. Scheffler, P. Schwerdtfeger, V. N. Staroverov, J. Sun, E. Tellgren, D. J. Tozer, S. B. Trickey, C. A. Ullrich, A. Vela, G. Vignale, T. A. Wesolowski, X. Xu, and W. Yang, Phys. Chem. Chem. Phys. 24, 28700 (2022).
- [4]S. H. Vosko, L. Wilk, and M. Nusair, Can. J. Phys. 58, 1200 (1980).
- [5]J. P. Perdew, K. Burke, and M. Ernzerhof, Phys. Rev. Lett. 77, 3865 (1996).
- [6]A. D. Becke, Phys. Rev. A 38, 3098 (1988).
- [7]A. D. Becke, J. Chem. Phys. 98, 5648 (1993).
- [8]J. Heyd, G. E. Scuseria, and M. Ernzerhof, J. Chem. Phys. 118, 8207 (2003).
- [9]C. Lee, W. Yang, and R. G. Parr, Phys. Rev. B 37, 785 (1988).
- [10]J. P. Perdew, K. Burke, and Y. Wang, Phys. Rev. B 54, 16533 (1996).
- [11]J. P. Perdew and Y. Wang, Phys. Rev. B 45, 13244 (1992).
- [12]J. Sun, A. Ruzsinszky, and J. P. Perdew, Phys. Rev. Lett. 115, 036402 (2015).
- [13]J. P. Perdew, R. G. Parr, M. Levy, and J. L. Balduz, Phys. Rev. Lett. 49, 1691 (1982).
- [14]W. Yang, Y. Zhang, and P. W. Ayers, Phys. Rev. Lett. 84, 5172 (2000).
- [15]A. J. Cohen, P. Mori-Sánchez, and W. Yang, J. Chem. Phys. 129, 121104 (2008).
- [16]P. W. Ayers, J. Math. Chem. 43, 285 (2008).
- [17]J. F. Janak, Phys. Rev. B 18, 7165 (1978).
- [18]T. Koopmans, Physica 1, 104 (1934).
- [19]J. P. Perdew and M. Levy, Phys. Rev. B 56, 16021 (1997).
- [20]L. Kronik and S. Kümmel, Phys. Chem. Chem. Phys. 22, 16467 (2020).
- [21]J. P. Perdew and M. Levy, Phys. Rev. Lett. 51, 1884 (1983).
- [22]L. J. Sham and M. Schlüter, Phys. Rev. Lett. 51, 1888 (1983).
- [23]E. Sagvolden and J. P. Perdew, Phys. Rev. A 77, 012517 (2008).
- [24]W. Yang, A. J. Cohen, and P. Mori-Sánchez, J. Chem. Phys. 136, 204111 (2012).
- [25]P. Mori-Sánchez and A. J. Cohen, Phys. Chem. Chem. Phys. 16, 14378 (2014).
- [26]T. Gould and J. Toulouse, Phys. Rev. A 90, 050502(R) (2014).
- [27]A. C. Burgess, E. Linscott, and D. D. O’Regan, J. Chem. Phys. 159, 211102 (2023).
- [28]G. K.-L. Chan, J. Chem. Phys. 110, 4710 (1999).
- [29]P. Mori-Sánchez, A. J. Cohen, and W. Yang, Phys. Rev. Lett. 102, 066403 (2009).
- [30]J. P. Perdew and E. Sagvolden, Can. J. Chem. 87, 1268 (2009).
- [31]X. De Vriendt, L. Lemmens, S. De Baerdemacker, P. Bultinck, and G. Acke, J. Chem. Theory Comput. 17, 6808 (2021).
- [32]X. De Vriendt, D. Van Hende, S. De Baerdemacker, P. Bultinck, and G. Acke, J. Chem. Phys. 156, 244115 (2022).
- [33]B. G. Janesko, Chem. Soc. Rev. 50, 8470 (2021).
- [34]T. Gál and P. Geerlings, J. Chem. Phys. 133, 144105 (2010).
- [35]A. M. Malek and R. Balawender, “Discontinuities of energy derivatives in spin-density functional theory,” (2013), arXiv:1310.6918 [physics].arxiv.org/abs/1310.6918
- [36]X. D. Yang, A. H. G. Patel, R. A. Miranda-Quintana, F. Heidar-Zadeh, C. E. González-Espinoza, and P. W. Ayers, J. Chem. Phys. 145, 031102 (2016).
- [37]R. Cuevas-Saavedra, D. Chakraborty, S. Rabi, C. Cárdenas, and P. W. Ayers, J. Chem. Theory Comput. 8, 4081 (2012).
- [38]J. P. Perdew, Int. J. Quantum Chem. 28, 497 (1985).
- [39]P. Borlido, T. Aull, A. W. Huran, F. Tran, M. A. L. Marques, and S. Bottl, J. Chem. Theory Comput. 15, 5069 (2019).
- [40]A. J. Cohen, P. Mori-Sánchez, and W. Yang, Phys. Rev. B 77, 115123 (2008).
- [41]A. Ruzsinszky, J. P. Perdew, G. I. Csonka, O. A. Vydrov, and G. E. Scuseria, J. Chem. Phys. 125, 194112 (2006).