betaFeedback

WorksPhysics and Astronomy

Nano-ARPES observation of a flat band at the \bar{M} point in 2.4° twisted bilayer graphene

Abstract

The emergence of flat bands in twisted bilayer graphene at the so-called magic angle reveals a range of intriguing phases, such as superconductivity and Mott insulating states, resulting from electrons entering a correlated state. This establishes twisted bilayer graphene as an excellent platform for exploring correlation effects in many-body phases and across various twist angles. However, in most cases, the twist angle is not an easy parameter to control because it exhibits structural instabilities such as relaxation and reconstruction that reduce the correlation effects. Here, we report the unexpected appearance of a flat band at the \bar{M} point far from the Fermi level in a 2.4° twisted bilayer graphene, directly visualized by angle-resolved photoemission spectroscopy. Our work is the first observation of flat bands away from the \bar{K} point in twisted bilayer graphene and highlights the need to probe the entire Brillouin zone to fully capture electronic states in twisted structures.

Introduction

Single-layer graphene has been extensively explored over the last few decades, revealing remarkable optical, thermal, and, above all, electronic properties [1, 2, 3]. Its special electronic properties arise from a linear energy dispersion E(k)E(k) at the K‾\overline{\mathrm{K}} points of its Brillouin zone. As a consequence, graphene displays exceptional transport properties, characterized by very high carrier mobility, making it highly attractive for electronic applications [3]. The success of graphene has naturally motivated the investigation of more complex multilayer graphene-based systems, whose electronic properties can differ significantly from those of a single layer [4, 5, 6]. In addition to stacking multiple layers, the weak interlayer coupling characteristic of van der Waals materials such as graphene, allows the layers to be rotated relative to one another, introducing an additional structural degree of freedom that is generally unavailable in conventional three-dimensional crystals [7].

This relative rotation of the two layers gives rise to twisted van der Waals structures and it is closely associated with the emergence of the moiré effect [8, 9]. In particular, when one graphene layer is placed on top of another with a twist angle θ\theta the interference between the two atomic lattices produces a larger-scale periodic pattern known as a moiré pattern. This moiré pattern forms a superlattice arising from the long-range modulation of the atomic density and its characteristic periodicity depends on the twist angle between the layers and for commensurate lattices can be written as: λM=a2sin⁡(θ/2)\lambda_{\mathrm{M}} = \frac{a}{2\sin(\theta/2)}; where λM\lambda_{\mathrm{M}} is the wavelength of the moiré pattern and aa the lattice constant which amounts to 2.46 Å in graphene [8, 9]. In certain conditions, the moiré superlattice can effectively modulate the electronic properties of the material [10]. For graphene, this effect is particularly significant at a 1.1° twist angle, also called the magic angle, where twisted bilayer graphene (TBG) presents flat bands in the vicinity of the Fermi level, and the electrons are extremely localized [11]. The reduced kinetic-energy scale enhances the relative importance of electron-electron interactions, giving rise to a rich phase diagram that includes correlated insulating and superconducting states [9, 12, 13]. The remarkable range of phenomena observed in TBG, along with the relative ease of experimentally probing them, makes it an ideal platform for investigating how geometry, interlayer coupling, and electronic correlations combine to generate emergent quantum phases. This provides strong motivation for a better understanding of graphene’s twisted electronic band structure. Consequently, most experimental and theoretical studies of TBG, including those using angle-resolved photoemission spectroscopy (ARPES) studies, have focused on the electronic structure near the Kˉ\bar{K} point and at twist angles close to the magic-angle regime. ARPES, particularly in its spatially resolved nano- and micro-ARPES implementations, provides direct access to the momentum-resolved band structure and has been instrumental in visualizing moiré-induced electronic states [14]. Flat bands and hybridization gaps have been observed close to the magic angle, [15] but weakly dispersive states have also been reported at larger twist angles, including angles of approximately 3° and 12.2°, as well as in twisted monolayer–bilayer graphene structures. [16, 17, 18, 19] A flat feature has furthermore been detected in the proximity of the Kˉ\bar{K} point near the Fermi level for TBG with a twist angle of approximately 3.2° [20]. These observations indicate that weakly dispersive states are not necessarily restricted to the immediate vicinity of the magic angle. Nevertheless, the electronic structure of TBG at larger twist angles remains incompletely understood, particularly away from the Kˉ\bar{K} point. This limitation partly reflects the experimental and theoretical emphasis on the low-energy Dirac bands due to their importance for transport, despite the possibility that moiré coupling, structural relaxation, strain, or interfacial interactions may generate localized states elsewhere in momentum space. For example, the Mˉ\bar{M} point hosts van Hove singularities [5] that are relevant for optical conductivity [21], can enhance electron-phonon coupling [22] and induce superconductivity if brought near the Fermi level via doping [23, 24] and can even host emergent symmetries [25]. In TBG, the moiré superlattice may modify these states; however, the electronic structure of TBG at the Mˉ\bar{M} point has not been experimentally probed by ARPES to date.

In this study we report the electronic structure of twisted bilayer graphene with a measured twist angle of 2.4° via nano-ARPES measurements along the Γˉ−Mˉ\bar{\Gamma}-\bar{M} and Γˉ−Kˉ\bar{\Gamma}-\bar{K} high-symmetry directions. No flat band is observed near the Kˉ\bar{K} point. In contrast, a pronounced weakly dispersive feature is detected near the Mˉ\bar{M} point at higher binding energy. Tight-binding and density functional theory (DFT) calculations reproduce the principal dispersive bands but do not account for this additional feature. The discrepancy suggests that its origin may involve structural or interfacial effects that are not captured by the present models. Our findings therefore extend the experimental exploration of TBG beyond the conventional focus on the low-energy electronic structure near Kˉ\bar{K} point and motivate further investigation of moiré-derived states throughout the full Brillouin zone.

Methods

The mechanical exfoliation method was used to obtain monolayer graphene (HQ graphene) and thin hh-BN (HQ graphene) flakes on SiO2\mathrm{SiO_2}/Si (University wafer) substrates [26]. This process involves repeatedly pressing Scotch tape against the material to peel off layers until a single or few-layered flake is achieved. Once the desired thin flakes are obtained on the substrates, the dry transfer technique is employed to precisely position them onto a target substrate. This sample was fabricated using the conventional “tear and stack” dry transfer method with a rotation involved [27]. A polymer stamp, consisting of a glass slide, a polydimethylsiloxane (PDMS, Sigma Aldrich) substrate, and a poly (bisphenol A carbonate) (PC, Sigma Aldrich) film, was used to pick up one of the cut graphene pieces at 90 °C. This piece was then rotated by 2°, with the rotational transfer stage offering a resolution of 1/60°. The rotated graphene layer was carefully placed on top of the remaining half. After assembling the TBG stack, a thick hh-BN flake was picked up at approximately 100 °C and positioned onto a 30 nm thick Ti/Au film on a marked SiO2\mathrm{SiO_2}/Si wafer by melting the PC film at temperatures above 180 °C. The PC film was removed by immersing the assembly in chloroform heated at 45 °C, for 40 min.

While a gold layer provides a reliable conductive substrate for ARPES measurements to avoid charging, the use of h-BN was motivated by the need for an atomically flat surface in order to obtain sharp band features [28]. To avoid the formation of a significant moiré pattern with graphene, a large twist angle between graphene and h-BN was chosen. At sufficiently large angles, the moiré wavelength becomes very short, suppressing the electronic influence of an additional moiré pattern [29, 30]. To ensure that the sample surface was atomically clean, as necessary for ARPES measurements, atomic force microscopy (AFM) was performed after each step to check the quality of the flakes and clean the surface from impurities and bubbles trapped between the layers. The sample was also annealed for 30 min in situ at 150 °C right before the ARPES measurement to desorb water and hydrocarbons that accumulated during the transfer through air to the beamline [18].

A conductive-mode AFM (c-AFM) system, operating in contact mode (Dimension, Bruker), was employed to simultaneously map topography (height channel), tunnelling current (current channel), and friction (lateral force channel, LFM) across the sample surface. These measurements allow to visualize the moiré structure and the 2D fast Fourier transform of the moiré pattern served to determine the twist angle between the two graphene layers.

Nano-ARPES measurements were performed at the ANTARES beamline of the SOLEIL synchrotron (Saint-Aubin, France), equipped with a hemispherical analyzer (MB Scientific, type A-1) using a beam spot with a diameter of 600 nm. All measurements were carried out in ultra-high vacuum at a temperature of 70 K, using linearly horizontally polarized light with a photon energy of 100 eV. The energy resolution was 70 meV and the angular resolution 0.5° [31].

The simulations of TBG were performed using two different techniques – tight-binding (TB) method and DFT. The TB calculations were performed using an in-house Python implementation based on an atomistic π\pi-orbital model, following the general approach of Ref. [32]. Each carbon atom was represented by a single pzp_z orbital. The intralayer interactions were described by a nearest-neighbor hopping parameter of t=−2.7t = -2.7 eV, while the interlayer hopping was modeled using an exponentially decaying function of the interatomic distance, t⊥(d)=γ1exp⁡[−(d−d0)/λ]t_{\perp}(d) = \gamma_1 \exp[-(d - d_0)/\lambda], with γ1=−0.35\gamma_1 = -0.35 eV, d0=3.35d_0 = 3.35 Å, and λ=0.45\lambda= 0.45 Å. Interlayer interactions were included up to a cutoff distance of 4.2 Å. To enable direct comparison with experiment, the calculated bands were unfolded onto the primitive Brillouin zone (BZ) of monolayer graphene. The unfolding procedure projects the supercell eigenstates onto primitive-cell Bloch states, yielding the spectral weight along the (Γ‾\overline{\Gamma}–M‾\overline{\mathrm{M}}–K‾\overline{\mathrm{K}}–Γ‾\overline{\Gamma}) high-symmetry path, following the formalism of Ref. [32].

The atomic supercells were generated using the supercell-core package [33], which searches for computationally tractable periodic supercells at a prescribed twist angle by optimizing the supercell geometry while minimizing the lattice strain required to accommodate the rotated layers. For the TB calculations, a supercell with a twist angle of 2.4°, containing 6892 carbon atoms (3446 atoms per layer), was selected. The supercell was defined by the matrix M=[[42,41],[−41,1]]M = [[42, 41], [-41, 1]] and exhibited a maximum absolute strain-tensor component of approximately 0.018%, corresponding to a nearly unstrained structure. For the DFT calculations, a smaller supercell with a twist angle of 2.31° was selected to reduce the computational cost. The corresponding structure contained 390 carbon atoms (198 and 192 atoms in the bottom and top layers, respectively) and was defined by the matrix M=[[11,6],[11,−3]]M = [[11, 6], [11, -3]]. The maximum absolute strain-tensor component was approximately 3.81%.

DFT calculations were carried out using the Quantum ESPRESSO simulation package [34] [35]. The electron-ion interactions were described via the projector-augmented wave method [36] [37]. We used the Perdew-Burke-Ernzerhof (PBE) parametrization of the generalized gradient approximation, and expanded the wave functions in a plane wave basis set with a cutoff of 60 Ry. A vacuum region of 17 Å along the c-axis was employed to separate the spurious images of bilayers, minimizing interactions between system replicas. Atomic positions were fully relaxed until the residual forces were below 10−410^{-4} Ry/Bohr, including van der Waals corrections via the DFT-D3 approach [38]. BZs were sampled on k-meshes of 3×3×13 \times3 \times1. The unfolding was performed using the BandUP(py) code [39, 40, 41].

Results and discussion

Structural characterization

TBG samples were prepared following the procedure described in the Methods section. The relative orientation of the two graphene layers was determined by conductive atomic force microscopy (c-AFM), which directly visualizes the moiré superlattice arising from the interference between the two graphene lattices. The c-AFM image in Figure 1 (a) presents a well-defined periodic moiré pattern extending over the investigated region, while its two-dimensional fast Fourier transform (Figure 1b) exhibits the expected sixfold symmetry. From the Fourier transform the wavelength of the moiré pattern, λM\lambda_{\mathrm{M}}, was determined to be 5.8 ± 0.2 nm corresponding to a twist angle ϑ\vartheta of 2.4 ± 0.2° [42]. This value places the sample well above the first magic angle while remaining in the regime where moiré-induced modifications of the electronic structure are expected to be significant [8]. Importantly, no secondary periodicity associated with the hh-BN substrate is observed in the c-AFM image. This confirms that the large rotational misalignment between graphene and the underlying hh-BN effectively suppresses the formation of an additional graphene/hh-BN moiré superlattice. Consequently, the electronic structure discussed below can be attributed predominantly to the TBG itself.

Image not extracted

Figure 1. (a) Conductive atomic force microscopy (c-AFM) image showing a moiré pattern caused by the interference of the atom densities. (b) 2D fast Fourier transform of the moiré pattern exhibiting a hexagonal symmetry.

Electronic band structure measured by nano-ARPES

The electronic band structure measured by nano-ARPES is presented in Figure 2 along the high symmetry directions Γˉ−Kˉ\bar{\Gamma}-\bar{K} (a) and Γˉ−Mˉ\bar{\Gamma}-\bar{M} (b) of the Brillouin zone, additional data along the Aˉ−Kˉ−Aˉ\bar{A}-\bar{K}-\bar{A} direction of symmetry can be found in Figure S1 in the Supplementary Material, together with the energy distribution curves that show the separation of the bands at the Kˉ\bar{K} point (Figure S2). The spectra exhibit sharp and well-defined bands, demonstrating the high quality of the transferred structure and the suitability of the sample for momentum-resolved electronic structure measurements. Along the Γˉ−Kˉ\bar{\Gamma}-\bar{K} direction two highly dispersive bands are resolved, corresponding to electronic states of the top and bottom graphene layers [43]. The valence band maximum (VBM) occurs at the Kˉ\bar{K} point, in agreement with the theoretical predictions and existing literature for TBG [44]. A markedly different behavior is observed along the Γˉ−Mˉ\bar{\Gamma}-\bar{M} direction (Figure 2b). While the two expected dispersive bands remain visible, [43] an additional band with substantially reduced dispersion appears close to the M‾\overline{\mathrm{M}} point at a binding energy of approximately 2.6 eV. The coexistence of this weakly dispersive feature with the ordinary graphene-derived bands immediately suggests an electronic state that cannot be explained by the conventional band structure alone [45]. A similar behavior is theoretically observed at the M‾\overline{\mathrm{M}} point in ref. [46] in bilayer graphene containing hexagonal vacancies, and in this case the flat dispersion is associated with the structural defects. However, due to the quality and sharpness of the bands at the M‾\overline{\mathrm{M}} and K‾\overline{\mathrm{K}} points, it is unlikely that these bands originate from vacancies [47, 48].

Image not extracted

Figure 2. Energy band dispersion of twisted bilayer graphene (twist angle 2.4±0.2∘2.4 \pm0.2^\circ) along the two high symmetry directions Γ‾−K‾\overline{\Gamma} - \overline{\mathrm{K}} (a) and Γ‾−M‾\overline{\Gamma} - \overline{\mathrm{M}} (b). The high-symmetry directions are indicated in the Brillouin zone sketch in the inset in panel (b).

Curvature analysis reveals a flat band at the M‾\overline{\mathrm{M}} point

To examine the weakly dispersive band observed around the M‾\overline{\mathrm{M}} point in greater detail, we conducted a 2D curvature analysis of the nano-ARPES spectra. This procedure enhances weak dispersive features while preserving their momentum dependence, allowing closely spaced bands to be distinguished with improved clarity [49]. The results are shown in Figure 3 for both the Γ‾−K‾\overline{\Gamma} - \overline{\mathrm{K}} direction and Γ‾−M‾\overline{\Gamma} - \overline{\mathrm{M}} directions. Along the Γ‾−K‾\overline{\Gamma} - \overline{\mathrm{K}} direction (Figure 3a), only the two dispersive graphene bands remain visible, confirming the absence of any weakly dispersive states in the vicinity of the K‾\overline{\mathrm{K}} point and indicating possible weak interlayer coupling [17, 50]. In contrast, the 2D curvature image along the Γ‾−M‾\overline{\Gamma} - \overline{\mathrm{M}} direction (Figure 3b) clearly resolves an additional band with negligible dispersion (bandwidth 0.2 eV) around the M‾\overline{\mathrm{M}} point. The enhanced contrast provided by the curvature analysis demonstrates that this feature is not an artefact arising from overlapping dispersive bands but represents a distinct flat electronic state. Furthermore, at the M‾\overline{\mathrm{M}} point the Fermi velocity is 6.82×1046.82 \times10^{4} m/s, almost two orders of magnitude less than the Fermi velocity at the K‾\overline{\mathrm{K}} point, 1.14×1061.14 \times10^{6} m/s, which is comparable to that reported in literature for monolayer graphene [51], indicating weak interaction [8, 10].

The pronounced difference between the two high-symmetry directions highlights the strong momentum dependence of the electronic structure in the present TBG. While previous ARPES studies have focused primarily on flat bands in the vicinity of the K‾\overline{\mathrm{K}} point, our measurements reveal that weakly dispersive states may also emerge at other locations in reciprocal space. This observation underlines the importance of probing multiple momentum directions when investigating moiré-derived electronic states. To the best of our knowledge, this is the first observation of flat bands at a twist angle larger than the magic angle and away from the K‾\overline{\mathrm{K}} point.

Flat bands are typically observed only in the vicinity of the magic angle (1.1∘1.1^\circ for TBG) where interlayer coupling, and band hybridization strongly suppress the Fermi velocity. At larger twist angles, the increased separation of the Dirac cones generally weakens the hybridization, leading to more dispersive electronic bands [8]. The observation of a flat band under these conditions, and, moreover, near the M‾\overline{\mathrm{M}} point rather than the K‾\overline{\mathrm{K}} point, cannot be readily explained within the standard framework of magic-angle physics. Although the present measurements establish the existence of this flat electronic state, they do not by themselves identify its microscopic origin. To gain further insight, we compare the experimental electronic structure with atomistic calculations based on tight-binding and density functional theory.

Image not extracted

Figure 3. 2D curvature of the band structure of twisted bilayer graphene (twist angle 2.4±0.2∘2.4 \pm0.2^\circ) along the two high symmetry directions Γ‾−K‾\overline{\Gamma}-\overline{\mathrm{K}} (a) and Γ‾−M‾\overline{\Gamma}-\overline{\mathrm{M}} (b). 2D curvature data correspond to the energy dispersion spectra shown in Figure 2. Flat band dispersion is only present at the high symmetry point M‾\overline{\mathrm{M}}, and completely absent at the K‾\overline{\mathrm{K}} point. High-symmetry points are indicated in the Brillouin zone sketch inset in (b)

Comparison with theoretical calculations

To understand the nature of the flat band at the M‾\overline{\mathrm{M}} point, we calculated the electronic structure of TBG performed within both the TB and DFT methods. Figure 4 shows the TB calculation performed for a twist angle ϑ=2.4∘\vartheta= 2.4^\circ, obtained using the supercell containing 6892 atoms. The calculation reproduces the principal features of the experimental electronic structure remarkably well. In particular, the dispersive bands around the K‾\overline{\mathrm{K}} point closely match the measured spectra, while the calculated band onsets near the M‾\overline{\mathrm{M}} point agree well with the experimentally observed dispersive states. This good overall agreement demonstrates that the electronic structure of the twisted bilayer is generally well described within the rigid-lattice approximation. However, despite reproducing the main dispersive bands, the TB calculation does not predict the additional flat band observed experimentally around the M‾\overline{\mathrm{M}} point. This indicates that the weakly dispersive state cannot be explained solely by the electronic structure of an ideal rigid TBG. One possible explanation is that the rigid-lattice π\pi-orbital-based approximation neglects structural effects, which also involve σ\sigma orbitals, known to occur in twisted van der Waals systems. Although lattice relaxation becomes progressively less pronounced with increasing twist angle, local structural distortions, residual strain, or domain boundaries may still modify the local electronic potential and give rise to electronic states that are absent in an idealized geometry. To explore this possibility, we performed complementary DFT calculations which include structural relaxation. The DFT calculations, carried out for a bilayer with twist angle of 2.31∘2.31^\circ, likewise fail to reproduce the experimentally observed flat band (Figure S3 in Supplementary Material). Moreover, the overall agreement with experiment is less satisfactory than for the TB calculations.

Image not extracted

Figure 4. (a) The supercell of twisted bilayer graphene (twist angle 2.4°) used in the TB calculations. (b) TB calculations along the Γ‾−M‾−K‾−Γ‾\overline{\Gamma}-\overline{M}-\overline{K}-\overline{\Gamma} direction. Different colors refer to different intensity of the bands.

This limitation primarily reflects the computational constraints imposed by the very large moiré supercell. The accessible supercell contains only 390 atoms, considerably fewer than required to faithfully describe the long-period moiré structure and possible local distortions associated with corrugation [52, 53, 54] and domain boundaries. Such domain walls can support quasi-one-dimensional electronic states [55, 56, 57], which may appear as flat or weakly dispersing bands in momentum-resolved measurements. Consequently, the calculations cannot fully capture long-range structural inhomogeneities that may influence the electronic band structure. The combined experimental and theoretical results therefore suggest that the observed flat band is not an intrinsic feature of an ideal periodic TBG. Instead, its appearance is consistent with an origin involving structural perturbations that are not incorporated in the present theoretical models. Such perturbations may include local strain, reconstruction, or other forms of symmetry breaking within the moiré lattice, including domain walls. At the same time, an additional contribution arising from residual interaction with the hh-BN substrate cannot be completely excluded. Although the large graphene–hh-BN twist angle suppresses the formation of an electronic moiré superlattice, weak hybridization effects at higher binding energies remain conceivable. Furthermore, one should also consider possible effects of strong electron-phonon coupling which is present across the range of angles in TBG [58], as electron phonon coupling has been known to induce kinks in monolayer graphene σ\sigma bands far from the Fermi level [59, 60, 61, 62]. Distinguishing between these possible mechanisms will require calculations capable of treating realistic relaxed structures together with systematic experimental studies, for example combining spatially resolved structural characterization, electron energy loss spectroscopy [63] and nano-ARPES measurements on the same regions of the sample.

Conclusions

In this work we investigated the electronic band structure of TBG with a twist angle of 2.4° by nano-ARPES, complemented by tight-binding and density functional theory calculations. The measurements reveal a pronounced weakly dispersing state around the M‾\overline{M} point at a binding energy of approximately 2.6 eV, while no comparable feature was observed near the K‾\overline{K} point. This distinguished the observed state from the flat bands associated with magic-angle TBG, which occur near the Fermi level and in the vicinity of the K‾\overline{K} point. The theoretical calculations successfully reproduce the principal dispersive features of the measured band structure but do not account for the additional flat band. This discrepancy indicates that the observed feature is unlikely to originate from the electronic structure of an ideal TBG and suggests that additional structural or interfacial effects, not captured by the present models, may contribute to its formation. Our findings demonstrate that moiré-induced electronic structure changes in TBG are not necessarily confined to the low binding-energy region near the K‾\overline{K} point. Instead, they point to a richer electronic landscape in which unexpected, localized states may emerge at larger twist angles, at different locations in the Brillouin zone, and at the higher binding energies. These results motivate further experimental and theoretical studies aimed at identifying the microscopic origin of such states and at developing more realistic models that incorporate structural relaxation, local inhomogeneity and substrate interaction.

Acknowledgements

This work was financially supported by the National Science Centre, Poland under project 2018/30/E/ST5/00667 (P.P. and P.D.). The calculations were carried out on the Dutch national e-infrastructure with the support of SURF Cooperative (EINF-17379) and on the Hábrók high performance computing cluster of the University of Groningen. AGC acknowledges the financial support of the Zernike Institute for Advanced Materials.

References

Nano-ARPES observation of a flat band at the M‾\overline{\mathrm{M}} point in 2.4∘2.4^\circ twisted bilayer graphene

Giovanna Feraco; Przemysław Przybysz; Oreste De Luca; Ying Wang; Pavel Dudin; José Avila; Jianting Ye; Paweł Dąbrowski; Paweł J. Kowalczyk; Jagoda Sławińska; Petra Rudolf; Antonija Grubišić-Čabo

Supplementary informatio_arXiv

Supplementary Material

for

TBG_arXiv

#Present address: European X-ray Free Electron Laser GmbH, Holzkoppel 4, 22869 Schenefeld, Germany

$Present address: Dipartimento di Fisica, Università della Calabria, Via Pietro Bucci, 87036 Rende, Italy.

%Present address: Department of Biomedical Signals and Systems, University of Twente, 7500 AE Enschede, The Netherlands

*Author to whom any correspondence should be addressed.

E-mail: [email protected]

Additional ARPES data

The electronic band structure measured by nano-ARPES along the Aˉ−Kˉ−Aˉ\bar{A} - \bar{K} - \bar{A} direction of symmetry can be found in Figure S1, while with the energy distribution curves that show the separation of the bands at the Kˉ\bar{K} point are presented in Figure S2.

Image not extracted

Figure 1 (PDF p. 13). Nano-ARPES along the Aˉ−Kˉ−Aˉ\bar{A} - \bar{K} - \bar{A} symmetry direction; the data show no flat band.

Image not extracted

Figure 2 (PDF p. 13). Energy distribution curves that show the separation of bands at the Kˉ\bar{K} point.

Additional theoretical data

The DFT calculations, carried out for a bilayer with twist angle of 2.31°, do not show the experimentally observed flat band.

Image not extracted

Figure 3 (PDF p. 14). DFT calculations of the band structure of bilayer graphene with a twist angle ϑ=2.31∘\vartheta= 2.31^\circ. The data show no flat band.

References

  1. [1]Tiwari S K, Sahoo S, Wang N and Huczko A 2020 Graphene research and their outputs: Status and prospect Journal of Science: Advanced Materials and Devices 5 10-29DOI
  2. [2]Lei Y, Zhang T, Lin Y-C, Granzier-Nakajima T, Bepete G, Kowalczyk D A, Lin Z, Zhou D, Schranghamer T F, Dodda A, Sebastian A, Chen Y, Liu Y, Pourtois G, Kempa T J, Schuler B, Edmonds M T, Quek S Y, Wurstbauer U, Wu S M, Glavin N R, Das S, Dash S P, Redwing J M, Robinson J A and Terrones M 2022 Graphene and Beyond: Recent Advances in Two-Dimensional Materials Synthesis, Properties, and Devices ACS Nanoscience Au 2 450-85DOI
  3. [3]Castro Neto A H, Guinea F, Peres N M R, Novoselov K S and Geim A K 2009 The electronic properties of graphene Rev. Mod. Phys. 81 109-62DOI
  4. [4]Zhou Z, Watanabe K, Taniguchi T, Lin X, Mao J and Gao H-J 2023 Emergence of correlations in twisted monolayer–trilayer graphene heterostructures Chinese Physics B 32 097203DOI
  5. [5]McCann E and Koshino M 2013 The electronic properties of bilayer graphene Rep. Prog. Phys. 76 056503
  6. [6]Perrin M L, Jayaraj A, Ghawri B, Watanabe K, Taniguchi T, Passerone D, Calame M and Zhang J 2024 Electric field tunable bandgap in twisted double trilayer graphene npj 2D Materials and Applications 8 14DOI
  7. [7]Bagchi S, Johnson H T and Chew H B 2020 Rotational stability of twisted bilayer graphene Phys. Rev. B 101 054109DOI
  8. [8]Andrei E Y and MacDonald A H 2020 Graphene bilayers with a twist Nat. Mater. 19 1265-75DOI
  9. [9]Feraco G, Boubaker W, Rudolf P and Grubišić-Čabo A 2025 Exotic quantum phenomena in twisted bilayer graphene Europhys. Lett. 151 56001
  10. [10]Bistritzer R and MacDonald A H 2011 Moiré bands in twisted double-layer graphene Proc Natl Acad Sci U S A 108 12233-7DOI
  11. [11]Tilak N, Lai X, Wu S, Zhang Z, Xu M, Ribeiro R d A, Canfield P C and Andrei E Y 2021 Flat band carrier confinement in magic-angle twisted bilayer graphene Nat. Commun. 12 4180
  12. [12]Cao Y 2020 Study Of electronic Correlation And Superconductivity In Twisted Graphene Superlattices (Ph.D. thesis). Massachusetts Institute of Technology)
  13. [13]Cao Y, Fatemi V, Demir A, Fang S, Tomarken S L, Luo J Y, Sanchez-Yamagishi J D, Watanabe K, Taniguchi T, Kaxiras E, Ashoori R C and Jarillo-Herrero P 2018 Correlated insulator behaviour at half-filling in magic-angle graphene superlattices Nature 556 80-4
  14. [14]Zhang H, Pincelli T, Jozwiak C, Kondo T, Ernstofer R, Sato T and Zhou S 2022 Angle-resolved photoemission spectroscopy Nature Reviews Methods Primers 2 54
  15. [15]Jiang Z, Hsieh K, Jones A J H, Majchrzak P, Sahoo C, Watanabe K, Taniguchi T, Miwa J A, Chen Y P and Ulstrup S 2023 Revealing flat bands and hybridization gaps in a twisted bilayer graphene device with microARPES 2D Mater. 10 045027DOI
  16. [16]Dale N, Utama M I B, Lee D, Leconte N, Zhao S, Lee K, Taniguchi T, Watanabe K, Jozwiak C, Bostwick A, Rotenberg E, Koch R J, Jung J, Wang F and Lanzara A 2023 Layer-Dependent Interaction Effects in the Electronic Structure of Twisted Bilayer Graphene Devices Nano Lett. 23 6799-806DOI
  17. [17]Jones A J H, Muzzio R, Majchrzak P, Pakdel S, Curcio D, Volckaert K, Biswas D, Gobbo J, Singh S, Robinson J T, Watanabe K, Taniguchi T, Kim T K, Cacho C, Lanata N, Miwa J A, Hofmann P, Katoch J and Ulstrup S 2020 Observation of Electrically Tunable van Hove Singularities in Twisted Bilayer Graphene from NanoARPES Adv. Mater. 32 2001656
  18. [18]Zhang H, Li Q, Park Y, Jia Y, Chen W, Li J, Liu Q, Bao C, Leconte N, Zhou S, Wang Y, Watanabe K, Taniguchi T, Avila J, Dudin P, Yu P, Weng H, Duan W, Wu Q, Jung J and Zhou S 2024 Observation of dichotomic field-tunable electronic structure in twisted monolayer-bilayer graphene Nat. Commun. 15 3737DOI
  19. [19]Nunn J E, McEllistrim A, Weston A, Garcia-Ruiz A, Watson M D, Mucha-Kruczynski M, Cacho C, Gorbachev R V, Fal’ko V I and Wilson N R 2023 ARPES Signatures of Few-Layer Twistronic Graphenes Nano Lett. 23 5201-8
  20. [20]Imori T, Visikovskiy A, Imamura H, Miyamachi T, Kitamura M, Horiba K, Kumagishira H, Mase K, Nakatsuji K, Tanaka S and Komori F 2021 Electronic structure of 3° twisted bilayer graphene on 4H-SiC(0001) Physical Review Materials 5 L051001
  21. [21]Havener R W, Liang Y, Brown L, Yang L and Park J 2014 Van Hove Singularities and Excitonic Effects in the Optical Conductivity of Twisted Bilayer Graphene Nano Lett. 14 3353-7DOI
  22. [22]Link S, Forti S, Stöhr A, Küster K, Rösner M, Hirschemeier D, Chen C, Avila J, Asensio M C, Zakharov A A, Wehling T O, Lichtenstein A I, Katsnelson M I and Starke U 2019 Introducing strong correlation effects into graphene by gadolinium intercalation Phys. Rev. B 100 121407DOI
  23. [23]McChesney J L, Bostwick A, Ohta T, Seyller T, Horn K, González J and Rotenberg E 2010 Extended van Hove Singularity and Superconducting Instability in Doped Graphene Phys. Rev. Lett. 104 136803pubmed.ncbi.nlm.nih.gov/20481902
  24. [24]Rosenzweig P, Karakachian H, Marchenko D, Küster K and Starke U 2020 Overdoping Graphene beyond the van Hove Singularity Phys. Rev. Lett. 125 176403DOI
  25. [25]Călugăru D, Jiang Y, Hu H, Pi H, Yu J, Vergniory M G, Shan J, Felser C, Schoop L M, Efetov D K, Mak K F and Bernevig B A 2025 Moiré materials based on M-point twisting Nature 643 376-81DOI
  26. [26]Yi M and Shen Z-G 2015 A review on mechanical exfoliation for the scalable production of graphene Journal of Materials Chemistry A 3 11700-15DOI
  27. [27]Wang L, Meric I, Huang P Y, Gao Q, Gao Y, Tran H, Taniguchi T, Watanabe K, Campos L M, Muller D A, Guo J, Kim P, Hone J, Shepard K L and Dean C R 2013 One-Dimensional Electrical Contact to a Two-Dimensional Material Science 342 614-7DOI
  28. [28]Damascelli A 2004 Probing the Electronic Structure of Complex Systems by ARPES Phys. Scr. T109 61-74DOI
  29. [29]Shi J, Zhu J and MacDonald A H 2021 Moiré commensurability and the quantum anomalous Hall effect in twisted bilayer graphene on hexagonal boron nitride Phys. Rev. B 103 075122DOI
  30. [30]Lisi S, Lu X, Benschop T, de Jong T A, Stepanov P, Duran J R, Margot F, Cucchi I, Cappelli E, Hunter A, Tamai A, Kandyba V, Giampietri A, Barinov A, Jobst J, Stalman V, Leeuwenhoek M, Watanabe K, Taniguchi T, Rademaker L, van der Molen S J, Allan M P, Efetov D K and Baumberger F 2021 Observation of flat bands in twisted bilayer graphene Nat. Phys. 17 189-93DOI
  31. [31]Avila J, Lorcy S and Dudin P 2023 ANTARES: Space-resolved electronic structure J. Electron. Spectrosc. Relat. Phenom. 266 147362DOI
  32. [32]Nishi H, Matsushita Y-I and Oshiyama A 2017 Band-unfolding approach to moiré-induced band-gap opening and Fermi level velocity reduction in twisted bilayer graphene Phys. Rev. B 95 085420DOI
  33. [33]Necio T and Birowska M 2020 Supercell-core software: A useful tool to generate an optimal supercell for vertically stacked nanomaterials AIP Advances 10 105105DOI
  34. [35]Giannozzi P, Andreussi O, Brumme T, Bunau O, Buongiorno Nardelli M, Calandra M, Car R, Cavazzoni C, Ceresoli D, Cococcioni M, Colonna N, Carnimeo I, Dal Corso A, de Gironcoli S, Delugas P, DiStasio J R A, Ferretti A, Floris A, Fratesi G, Fugallo G, Gebauer R, Gerstmann U, Giustino F, Gorni T, Jia J, Kawamura M, Ko H-Y, Kokalj A, Küçükbenli E, Lazzeri M, Marsili M, Marzari N, Mauri F, Nguyen N L, Nguyen H-V, Otero-de-la-Roza A, Paulatto L, Poncé S, Rocca D, Sabatini R, Santra B, Schlipf M, Seit­sonen A P, Smogunov A, Timrov I, Tonhauser T, Umari P, Vast N, Wu X and Baroni S 2017 Advanced capabilities for materials modelling with Quantum ESPRESSO J. Phys.: Condens. Matter 29 465901
  35. [37]Blöchl P E 1994 Projector augmented-wave method Phys. Rev. B 50 17953-79pubmed.ncbi.nlm.nih.gov/9976227
  36. [38]Perdew J P, Burke K and Ernzerhof M 1996 Generalized Gradient Approximation Made Simple Phys. Rev. Lett. 77 3865-8pubmed.ncbi.nlm.nih.gov/10062328
  37. [39]Medeiros P V C, Stafström S and Björk J 2014 Effects of extrinsic and intrinsic perturbations on the electronic structure of graphene: Retaining an effective primitive cell band structure by band unfolding Phys. Rev. B 89 041407DOI
  38. [40]Medeiros P V C, Tsirkin S S, Stafström S and Björk J 2015 Unfolding spinor wave functions and expectation values of general operators: Introducing the unfolding-density operator Phys. Rev. B 91 041116DOI
  39. [41]Iraola M, Mañes J L, Bradlyn B, Horton M K, Neupert T, Vergniory M G and Tsirkin S S 2022 IrRep: Symmetry eigenvalues and irreducible representations of ab initio band structures Comput. Phys. Commun. 272 108226DOI
  40. [42]Zhang L, Wang Y, Hu R, Wan P, Zheliuk O, Liang M, Peng X, Zeng Y-L and Ye J 2022 Correlated States in Strained Twisted Bilayer Graphenes Away from the Magic Angle Nano Lett. 22 3204-11DOI
  41. [43]Ohta T, Bostwick A, Seyller T, Horn K and Rotenberg E 2006 Controlling the Electronic Structure of Bilayer Graphene Science 313 951-4
  42. [44]Ould NE M L, Boujnah M, Benyoussef A and El Kenz A 2017 Electronic and Electrical Conductivity of AB and AA-Stacked Bilayer Graphene with Tunable Layer Separation Journal of Superconductivity and Novel Magnetism 30 1263-7
  43. [45]Jung J and MacDonald A H 2014 Accurate tight binding models for the π bands of bilayer graphene Phys. Rev. B 89 035405DOI
  44. [46]Kishimoto K and Okada S 2016 Influence of defects on the electronic structures of bilayer graphene Surface Science 644 18-23DOI
  45. [47]Kot P, Parnell J, Habibian S, Straßer C, Ostrovsky P M and Ast C R 2020 Band dispersion of graphene with structural defects Phys. Rev. B 101 235116DOI
  46. [48]Maddumapatabandi T D, Bussolotti F, Fu W, Kawai H and Johnson Goh K E 2024 Influence of Substrate Defects on the Electronic Properties of the WS2 Monolayer/Highly Oriented Pyrolytic Graphite Heterostructure ACS Applied Electronic Materials 6 7980-8DOI
  47. [49]Zhang P, Richard P, Qian T, Xu Y-M, Dai X and Ding H 2011 A precise method for visualizing dispersive features in image plots Rev. Sci. Instrum. 82 043712DOI
  48. [50]Yin L-J, Qiao J-B, Wang W-X, Zuo W-J, Yan W, Xu R, Dou R-F, Nie J-C and He L 2015 Landau quantization and Fermi velocity renormalization in twisted graphene bilayers Phys. Rev. B 92 201408DOI
  49. [51]Knox K R, Wang S, Morgante A, Cvetko D, Locatelli A, Mentes T O, Niño M A, Kim P and Osgood R M 2008 Spectromicroscopy of single and multilayer graphene supported by a weakly interacting substrate Phys. Rev. B 78 201408DOI
  50. [52]Uchida K, Furuya S, Iwata J-I and Oshiyama A 2014 Atomic corrugation and electron localization due to Moiré patterns in twisted bilayer graphenes Phys. Rev. B 90 155451DOI
  51. [53]Gargiulo F and Yazyev O V 2018 Structural and electronic transformation in low-angle twisted bilayer graphene 2D Mater. 5 015019DOI
  52. [54]Lucignano P, Alfè D, Cataudella V, Ninno D and Cantele G 2019 Crucial role of atomic corrugation on the flat bands and energy gaps of twisted bilayer graphene at the magic angle θ 1.08° Phys. Rev. B 99 195419DOI
  53. [55]Alden J S, Tsen A W, Huang P Y, Hovden R, Brown L, Park J, Muller D A and McEuen P L 2013 Strain solitons and topological defects in bilayer graphene Proc. Natl. Acad. Sci. USA 110 11256-60DOI
  54. [56]Wen L, Lv X and Li Z 2024 Local optical conductivity of strain solitons in bilayer graphene with arbitrary soliton angle Phys. Rev. B 110 235402DOI
  55. [57]Pinto A K M, Frazão N F, Azevedo D L and Moraes F 2020 Evidence for flat zero-energy bands in bilayer graphene with a periodic defect lattice Physica E: Low-dimensional Systems and Nanostructures 119 113987DOI
  56. [58]Zhu Z and Devereaux T P 2026 Microscopic theory for electron-phonon coupling in twisted bilayer graphene Phys. Rev. B 113 035446DOI
  57. [59]Mazzola F, Wells J W, Yakimov R, Ulstrup S, Miwa J A, Balog R, Bianchi M, Leandersson M, Adell J, Hofmann P and Balasubramanian T 2013 Kinks in the sigma Band of Graphene Induced by Electron-Phonon Coupling Phys. Rev. Lett. 111 216806
  58. [60]Jung S W, Shin W J, Kim J, Moreshini L, Jeon H W, Rotenberg E, Bostwick A and Kim K S 2016 Sublattice Interference as the Origin of $\sqrt{3}\times\sqrt{3}$ Band Kinks in Graphene Phys. Rev. Lett. 116 186802
  59. [61]Thingstad E, Kamra A, Wells J W and Sudbø A 2020 Phonon-mediated superconductivity in doped monolayer materials Phys. Rev. B 101 214513DOI
  60. [62]Mazzola F, Frederiksen T, Balasubramanian T, Hofmann P, Hellsing B and Wells J W 2017 Strong electron-phonon coupling in the sigma band of graphene Phys. Rev. B 95 075430DOI
  61. [63]Lin Y-C, Motoyama A, Solís-Fernández P, Matsumoto R, Ago H and Suenaga K 2021 Coupling and Decoupling of Bilayer Graphene Monitored by Electron Energy Loss Spectroscopy Nano Lett. 21 10386-91DOI

Paper details

vlnc:W_gqmfkfwv
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents