betaFeedback

WorksPhysics and Astronomy

On the nature of low-energy electronic states in twisted bilayer graphene: a first-principles study

Abstract

The nature of low-energy electronic states in twisted bilayer graphene (TBG) near the magic angle has been extensively discussed in the literature on qualitative grounds, since these states play a key role in the construction of effective few-band models toward a many-body theory. Here, we report extensive and systematic first-principles calculations of TBG electronic states in the magic-angle range, using density functional theory with no further approximations. We construct moiré-scale localized Wannier states for the low-energy bands and develop an effective ten-band model for each KK valley. The Wannier orbitals contain both atomic and moiré-scale details and are centered near the high-symmetry stackings in the moiré cell. We calculate Coulomb and exchange integrals of these localized states, quantities that are the basic ingredients in many-body models. We also compare the values of these integrals to those obtained or assumed in previous works. By symmetrizing the ten-band Hamiltonians and basis orbitals, we provide insight into how the dominant hoppings between the flat-band orbitals evolve as a function of twist angle.

Introduction

Since the observation of numerous exotic phenomena in twisted bilayer graphene (TBG) near the magic angle, including superconductivity [1, 2, 3, 4, 5, 6, 7], correlated insulating behavior [8, 9], and topological phases [10, 11, 12, 13, 14, 15, 16], recent experimental advances have begun to shed light on the origin of these phenomena with increasing resolution. Scanning tunneling microscopy (STM) can probe the spatial variation of wavefunctions in TBG with atomic-scale resolution, revealing symmetry-broken textures thought to be related to correlated states and superconductivity [17]. Quantum twisting microscopy can directly measure the electronic band structure of twisted interfaces [18] and has revealed that the flat bands of TBG under strong electron correlations are drastically changed from their non-interacting counterparts [19]. Related optical probes have also begun to access the role of quantum geometry and interactions in the flat bands [20].

Understanding these experimental observations requires a rigorous, microscopic, single-particle model describing the bands of interest that can serve as the foundation for many-body models. A traditional approach to obtaining such a fundamental model has been to derive reduced tight-binding models of the low-energy bands from single-particle Hamiltonians of TBG, such as continuum models [21, 22, 23, 24, 25, 26, 27, 28, 29, 30] or parameterized tight-binding models [31, 32, 33, 34, 35, 36]. The resulting basis orbitals of such reduced models can then be used to calculate electronic interactions [37, 38, 39, 40, 41]. However, early works isolating only the flat bands of TBG encountered the Wannier obstruction associated with the fragile topology of TBG [42, 43, 44, 45, 46], resulting in highly delocalized Wannier orbitals that are not ideal for modeling local interactions. Moreover, models derived from continuum Hamiltonians or parameterized tight-binding descriptions do not contain the full atomic-scale

wavefunctions or the effect of atomic relaxation as obtained from realistic first-principles treatment.

In this work, we build upon the DFT framework of Refs. [47, 48, 49] to derive reduced tight-binding models and real-space Wannier orbitals for magic-angle TBG entirely from first-principles calculations. Starting from fully relaxed DFT structures, we Wannierize the DFT bands within a manifold closest to the charge neutrality point (CNP), which is separated from the rest of the spectrum by a kk-dependent gap. The resulting tight-binding Hamiltonian naturally splits into two blocks, which we identify with the two valleys of TBG. This approach provides a valley-resolved, ab initio model that retains the spatial information contained in the DFT wavefunctions while reducing the electronic structure to a lower-dimensional manifold for further analysis. The corresponding Wannier orbitals exhibit both atomic and moiré-scale character, with centers and weight distributed near the AA, domain-wall (DW), and AB/BA regions of the moiré unit cell.

Using these orbitals as a basis, we compute on-site and nearest-neighbor Coulomb interactions, as well as exchange interactions, as a function of twist angle. To contextualize our findings and compare with previous work, we project the reduced models into a symmetrized basis commonly used in related tight-binding models of TBG. This process reveals a dramatic twist-angle dependence in certain orbital hoppings relevant to the dispersion of the flat bands. The results provide a route from ab initio electronic structure to reduced, rigorous tight-binding models of magic-angle TBG and offer the necessary ingredients for modeling of electron correlations in the context of a many-body theory completely derived from first principles.

Methods

Fully relaxed atomic structures, electronic bands, and Bloch states of TBG were calculated using the SIESTA DFT code [50] for commensurate twist angles between 21.79∘21.79^\circ and

0.78∘0.78^\circ, with a summary of the electronic bands shown in Figure 1 (for details of the DFT calculations, see Refs. [48, 49]). For commensurate angles θ\theta in the range [0.93∘,1.41∘][0.93^\circ,1.41^\circ], Wannier orbitals were obtained using the WANNIER90 package [51, 52] by minimizing the total spread Ω\Omega of NN Wannier orbitals ∣wn(r)⟩\lvert w_n(\mathbf{r})\rangle:

Features of the DFT electronic bands in twisted bilayer graphene

Figure 1. Features of the DFT electronic bands in TBG as a function of twist angle θ\theta. (a) Fermi velocity vFv_{\mathrm{F}} of the Dirac cones at the K point in the moiré Brillouin zone, normalized by the Fermi velocity vF0v_{\mathrm{F}}^{0} of monolayer graphene. (b) Bandwidth EwE_{\mathrm{w}}, defined as the energy difference between the highest and lowest energy states in the flat bands, as shown in the inset. The dashed line at 30 meV denotes the bandwidth cutoff we use to define the magic range in the DFT calculations. (c) Band gaps EgE_{\mathrm{g}} between the flat bands and the remote bands. The upper (lower) band gap is defined as the energy difference between the upper (lower) flat band and its neighboring remote band at the Γ\Gamma point, as shown in the inset. The shaded region in each panel denotes the magic range. The bottom axis gives the twist angle θ\theta in degrees, while the top axis shows the corresponding number of atoms per moiré cell.

Ω=∑n=1NΩn=∑n=1N[⟨r2⟩n−∣⟨r⟩n∣2],(1)\Omega= \sum_{n=1}^{N}\Omega_n = \sum_{n=1}^{N}\left[\langle r^2\rangle_n-\lvert\langle\mathbf{r}\rangle_n\rvert^2\right], \tag*{(1)}

where ⟨r2⟩n=⟨wn(r)∣r2∣wn(r)⟩\langle r^2\rangle_n=\langle w_n(\mathbf{r})\lvert r^2\lvert w_n(\mathbf{r})\rangle, and ⟨r⟩n=⟨wn(r)∣r∣wn(r)⟩\langle\mathbf{r}\rangle_n=\langle w_n(\mathbf{r})\lvert\mathbf{r}\lvert w_n(\mathbf{r})\rangle. We select the bands to be included in the summation by observing that there exists a manifold of N=20N=20 states (10 above and 10 below the CNP), which are separated from the rest of the energy spectrum by a k\mathbf{k}-dependent band gap, as shown in Figure 2 (a). As such, disentanglement of these bands from the rest is not required. The spread Ω\Omega can be written in terms of the overlaps Mmnk,b=⟨um,k∣un,k+b⟩M_{mn}^{\mathbf{k},\mathbf{b}}=\langle u_{m,\mathbf{k}}\lvert u_{n,\mathbf{k}+\mathbf{b}}\rangle between periodic parts of the Bloch states um,k(r)u_{m,\mathbf{k}}(\mathbf{r}) on a discrete k\mathbf{k}-point grid [51]. We calculate the Bloch states ψm,k(r)=eik⋅rum,k(r)\psi_{m,\mathbf{k}}(\mathbf{r})=e^{i\mathbf{k}\cdot\mathbf{r}}u_{m,\mathbf{k}}(\mathbf{r}) on a uniform 6×66\times6 k\mathbf{k}-point grid, the minimal grid that includes the high-symmetry points Γ\Gamma, K, and M in the moiré Brillouin zone (mBZ). The overlaps Mmnk,bM_{mn}^{\mathbf{k},\mathbf{b}} are then used to determine the unitary matrices U(k)U^{(\mathbf{k})} for constructing each wn,R(r)w_{n,\mathbf{R}}(\mathbf{r}) from the Bloch states:

Wannierization procedure and resulting tight-binding model for $\theta = 1.05^\circ$

Figure 2. Wannierization procedure and resulting tight-binding model for θ=1.05∘\theta= 1.05^\circ. (a) Band structure of TBG in the magic range obtained from DFT, with the 20 bands selected for Wannierization in black. (b) The 20 initial orbital centers used for Wannierization. Intersections of white lines denote the AA regions. 6 orbitals (red) are centered on a triangular lattice (AA region), 6 orbitals (green) are centered on a Kagome lattice (DW) with 2 per site, and 8 orbitals (blue) are centered on a honeycomb lattice (AB/BA) with 4 per site. (c) Amplitude of the real-space hopping matrix elements ∣Hij(R)∣\lvert H_{ij}(\mathbf{R})\rvert, in units of eV. Each element Hij(R)H_{ij}(\mathbf{R}) denotes hopping from orbital jj in the unit cell shifted by R=na1+ma2≡(n,m)\mathbf{R}=n\mathbf{a}_1+m\mathbf{a}_2\equiv(n,m) to orbital ii in the original cell. (d) Momentum-dependent tight-binding Hamiltonian H(k)H(\mathbf{k}) assembled from Hij(R)H_{ij}(\mathbf{R}) via Eq. (3) for k=K\mathbf{k}=\mathrm{K}. (e) Band structures obtained for individual valleys by diagonalizing the 10×1010\times10 blocks of H(k)H(\mathbf{k}) outlined in blue and magenta in (d).

wn,R(r)=1Nk∑k[∑mUmn(k)ψm,k(r)]e−ik⋅R,(2)w_{n,\mathbf{R}}(\mathbf{r})=\frac{1}{N_k}\sum_{\mathbf{k}}\left[\sum_m U_{mn}^{(\mathbf{k})}\psi_{m,\mathbf{k}}(\mathbf{r})\right]e^{-i\mathbf{k}\cdot\mathbf{R}}, \tag*{(2)}

where NkN_k is the number of k\mathbf{k}-points in the summation. We use a set of trial orbitals gn(r)g_n(\mathbf{r}) as an initial guess for the Wannier orbitals. Motivated by the choice of orbitals in previous ten-band models [24, 44], we choose 20 such gn(r)g_n(\mathbf{r}) with atomic pzp_z character with centers in the moiré cell shown in Figure 2 (b): 6 at the AA regions (corresponding to a triangular lattice); 2 at each of the three DW centers (forming a Kagome lattice); and 4 in each of the AB and BA regions (forming a honeycomb lattice). The Wannierization procedure is then iterated until Ω\Omega converges.

Results

Electronic band structure features

We calculate the electronic bands of TBG for commensurate twist angles as small as 0.78∘0.78^\circ, corresponding to over 20,000 atoms per moiré cell, from first-principles DFT. In Figure 1 we show the Fermi velocity vFv_{\mathrm{F}}, bandwidth EwE_{\mathrm{w}} of the flat bands, and band gaps EgE_{\mathrm{g}} between the flat bands and the remote bands as a function of twist angle θ\theta. The Fermi velocity and bandwidth both attain a minimum between 0.93∘0.93^\circ and 0.96∘0.96^\circ (vF/vF0=0.3%v_{\mathrm{F}}/v_{\mathrm{F}}^{0}=0.3\% and Ew=3E_{\mathrm{w}}=3 meV at 0.93∘0.93^\circ), while the band gaps reach a maximum in that range (upper Eg=35E_{\mathrm{g}}=35 meV and lower Eg=28E_{\mathrm{g}}=28 meV at 0.96∘0.96^\circ). At an angle θ∗\theta^{*} between 0.93∘0.93^\circ and 0.96∘0.96^\circ, the flat bands touch at the Γ\Gamma point, exchange wavefunction character, and then cross along the Γ\Gamma–M path as the twist angle decreases [36, 48]. (We note that the flat bands do not cross each other at the Dirac points.) We thus define the magic angle in the SIESTA DFT calculations to be 0.96∘0.96^\circ, the commensurate angle above θ∗\theta^{*} with the smallest Fermi velocity and bandwidth. We note that the precise value of the magic angle calculated from DFT depends on the choice of exchange-correlation functional and van der Waals interactions [49]; however, the Fermi velocity, bandwidth, and band gaps calculated from DFT are consistent with other models aside from a small offset in twist angle [49].

In our case, the magic angle in the SIESTA DFT calculations is somewhat smaller than the value of the magic angle typically used in prior literature (∼1.05∘\sim1.05^\circ), the angle at which the Fermi velocity vanishes in the Bistritzer–MacDonald model [22]. However, because the Fermi velocity never truly vanishes in models accounting for atomic relaxation, such as our DFT calculations and Refs. [24, 36], we also define a “magic range” where the flat bands remain isolated and possess a small enough bandwidth (∼30\sim30 meV or less) such that electronic interactions become important. In Figure 1 (c), the smallest angle at which the flat bands are isolated is 0.84∘0.84^\circ; at that angle, the bandwidth of the flat bands is ∼30\sim30 meV. The largest angle at which the bandwidth remains below ∼30\sim30 meV is 1.05∘1.05^\circ. We thus define [0.84∘,1.05∘][0.84^\circ,1.05^\circ] as the magic range of our calculations, as shown by the shaded region in Figure 1. The width of our magic range is in agreement with the range of angles, 0.93∘0.93^\circ to 1.16∘1.16^\circ, where experimental studies report correlated phases and superconductivity [1, 7].

Tight-binding models

The tight-binding Hamiltonian in the basis of the localized orbitals obtained during Wannierization is specified by the matrix elements for hopping from orbital jj in the unit cell located at R=na1+ma2≡(n,m)\mathbf{R}=n\mathbf{a}_1+m\mathbf{a}_2\equiv(n,m) to orbital ii in the original cell, R=(0,0)\mathbf{R}=(0,0), where a1\mathbf{a}_1 and a2\mathbf{a}_2 are the moiré lattice vectors. A representative tight-binding model is shown in Figure 2 (c) and (d) for θ=1.05∘\theta=1.05^\circ. In Figure 2 (c) we show the 20×2020\times20 blocks Hij(n,m)H_{ij}^{(n,m)} located at the (n,m)(n,m) moiré cell corresponding to the initial orbital jj.

tial orbital jj. The squares at position i,ji,j within each 20×2020\times20 block are colored based on the magnitude of the hopping from wj,(n,m)w_{j,(n,m)} to wi,(0,0)w_{i,(0,0)}. The 20 by 20 matrix of hoppings can be block-diagonalized into two 10×1010\times10 blocks, with all elements in the off-diagonal blocks less than 1 meV, that is, less than 1% of the largest matrix element, in magnitude. The momentum-dependent tight-binding Hamiltonian H(k)H(\mathbf{k}) is constructed as follows:

Hij(k)=∑RHij(R)1gR∑Teik⋅(R+T),(3)H_{ij}(\mathbf{k})=\sum_{\mathbf{R}}H_{ij}(\mathbf{R})\frac{1}{g_{\mathbf{R}}}\sum_{\mathbf{T}}e^{i\mathbf{k}\cdot(\mathbf{R}+\mathbf{T})}, \tag*{(3)}

where T\mathbf{T} is a correction vector for each R\mathbf{R} used by Wannier90 to account for finite hopping distances and gRg_{\mathbf{R}} is the number of T\mathbf{T} vectors for each R\mathbf{R} shell. After this transformation, the off-diagonal blocks of H(k)H(\mathbf{k}) remain small in comparison to the on-diagonal blocks. We thus neglect the off-diagonal blocks of H(k)H(\mathbf{k}) and work with the two 10×1010\times10 on-diagonal blocks.

We compute the eigenvalues of the two 10×1010\times10 on-diagonal blocks of H(k)H(\mathbf{k}) along the K–Γ\Gamma–M–K path in the mBZ, yielding the band structures shown in Figure 2 (e). We observe that diagonalizing the 10×1010\times10 block outlined in blue in Figure 2 (d) results in the band structure highlighted in blue in Figure 2 (e) that closely reproduces 10 of the 20 DFT bands, corresponding to one K valley. Similarly, diagonalizing the block outlined in magenta closely reproduces the remaining 10 bands, corresponding to the other KK valley, as seen in Figure 2 (e). By comparing these results with continuum models [22, 24], which are parameterized for a single valley, we verify that each 10×1010 \times10 on-diagonal block corresponds to one KK valley. Consequently, each 10×1010 \times10 block can be treated as a ten-band model of TBG, and all subsequent analysis will be done for a single valley using a single ten-band model. The agreement between the bands from the effective model Hamiltonian and the DFT results is of similar quality for all other angles, especially for the bands closest to the CNP. When the Wannierization process results in poorer agreement, only the bands farthest away from the CNP are affected, which does not have any impact on the usefulness of the model.

Properties of Wannier orbitals

The basis states for our ten-band models are the twist-angle-dependent real-space Wannier orbitals; some examples are shown in Figure 3. In Figure 3 (a) we show the atomic-scale probability density ∣w(r)∣2|w(\mathbf{r})|^2 of a representative orbital w(r)w(\mathbf{r}) for θ=1.41∘\theta= 1.41^\circ. Close to the center of the Wannier orbital (near the AA region), ∣w(r)∣2|w(\mathbf{r})|^2 is a local maximum at the positions of the atoms. In contrast, near the edge of the Wannier orbital (closer to the AB/BA and DW regions), ∣w(r)∣2|w(\mathbf{r})|^2 reaches a local maximum along bonds in between atoms. To obtain a moiré-scale description of the orbital, we perform a convolution of ∣w(r)∣2|w(\mathbf{r})|^2 with a Gaussian N(r′)\mathcal{N}(\mathbf{r}') centered at r\mathbf{r}:

Wannier orbitals from first principles

Figure 3. Wannier orbitals from first principles. (a) Probability density ∣w(r)∣2|w(\mathbf{r})|^2 integrated along the out-of-plane direction for a single Wannier orbital w(r)w(\mathbf{r}) for θ=1.41∘\theta= 1.41^\circ. Green dots indicate atomic positions. (b) Convolution of ∣w(r)∣2|w(\mathbf{r})|^2 in (a) with a Gaussian with a standard deviation of 10 Å. (c) Shapes and locations of all 10 Wannier orbitals from one valley for θ=1.05∘\theta= 1.05^\circ. Yellow parallelogram in the top left denotes the moiré cell containing circles that denote the centers of the orbitals within the cell. Closed circles denote orbital centers in one valley; open circles denote orbital centers in the other valley. The colors of the circles correspond to the classification of each orbital as described in the text. The probability densities of orbitals 1 through 10 are shown.

∣w~nR(r)∣2≡(∣wnR∣2∗N)(r)=∑r′∣wnR(r′)∣2N(r′).(4)|\widetilde{w}_{n\mathbf{R}}(\mathbf{r})|^2 \equiv(|w_{n\mathbf{R}}|^2 * \mathcal{N})(\mathbf{r}) = \sum_{\mathbf{r}'} |w_{n\mathbf{R}}(\mathbf{r}')|^2 \mathcal{N}(\mathbf{r}') . \tag*{(4)}

The corresponding moiré-scale orbital is shown in Figure 3 (b), while in Figure 3 (c) we show the shape and location of all 10 moiré-scale orbitals for θ=1.05∘\theta= 1.05^\circ. We classify the Wannier orbitals into three categories, based on the spread and center position: (i) AA orbitals (labeled 1–3 in Figure 3 (c)), (ii) DW orbitals (labeled 4–6), and (iii) AB/BA orbitals (2 in each region, labeled 7, 9 and 8, 10, respectively). The dot within each orbital denotes its center and is color-coded red (AA), green (DW), or blue (AB/BA). The top left corner of Figure 3 (c) shows how the orbitals for each valley are centered within a single moiré unit cell, with filled and open circles denoting the centers of the orbitals corresponding to the two valleys.

For further analysis of the orbital character, we show in Figure 4 (a) the radius rnr_n of each orbital type, defined as rn=Ωnr_n = \sqrt{\Omega_n} with Ωn\Omega_n defined in Eq. (1). The AA orbitals have the smallest radius, rn∼45r_n \sim45 Å for θ=1.41∘\theta= 1.41^\circ, and it increases only slightly as the twist angle decreases. The AB/BA and DW orbitals have larger radii, rn∼55r_n \sim55 Å for θ=1.41∘\theta= 1.41^\circ, that increase more rapidly to rn≳70r_n \gtrsim70 Å, as the twist angle decreases from 1.41∘1.41^\circ to 0.93∘0.93^\circ. In Figure 4 (b) we plot the distances of the AA and DW orbital centers from the high-symmetry stacking regions of the moiré cell. The distance dτd_\tau of the AA and DW orbitals from the triangular lattice sites (exact AA-stacking regions) generally increases as the twist angle decreases, with the trend being more pronounced for the DW orbitals. The offset dτ−τd_{\tau-\tau} of the AA and DW orbitals from the nearest domain wall, although smaller than dτd_\tau, shows similar trends.

Properties of the Wannier orbitals

Figure 4. Properties of the Wannier orbitals. (a) Radius rn=Ωnr_n = \sqrt{\Omega_n} of the orbitals as a function of θ\theta. (b) Distance of the AA and DW Wannier centers from the AA stacking site (dτd_\tau, filled circles) and from the nearest domain wall (dτ−τd_{\tau-\tau}, open circles). Both distances are illustrated in the insets and plotted as a function of θ\theta.

On-site and nearest-neighbor interactions

We use the Wannier orbitals to calculate Coulomb and exchange interactions in our ten-band model. The Coulomb interaction parameters UU and exchange interaction parameters JJ are given by

Unm(R)=e24πϵ0∬∣wn,0(r)∣2∣wm,R(r′)∣2ϵ∣r−r′∣ dr dr′(5)U_{nm}(\mathbf{R}) = \frac{e^2}{4\pi\epsilon_0} \iint\frac{|w_{n,0}(\mathbf{r})|^2 |w_{m,\mathbf{R}}(\mathbf{r}')|^2}{\epsilon|\mathbf{r}-\mathbf{r}'|}\,d\mathbf{r}\,d\mathbf{r}' \tag*{(5)}

and

Jnm(R)=e24πϵ0∬wn,0∗(r)wm,R∗(r′)wm,R(r)wn,0(r′)ϵ∣r−r′∣ dr dr′(6)J_{nm}(\mathbf{R}) = \frac{e^2}{4\pi\epsilon_0} \iint\frac{w_{n,0}^*(\mathbf{r})w_{m,\mathbf{R}}^*(\mathbf{r}')w_{m,\mathbf{R}}(\mathbf{r})w_{n,0}(\mathbf{r}')}{\epsilon|\mathbf{r}-\mathbf{r}'|}\,d\mathbf{r}\,d\mathbf{r}' \tag*{(6)}

respectively, where wn,R(r)w_{n,\mathbf{R}}(\mathbf{r}) is a Wannier orbital in a moiré cell located at a lattice vector R\mathbf{R} and ϵ\epsilon is the dimensionless dielectric function that captures the Coulomb screening by electrons in remote bands. In this work, we consider on-site and nearest-neighbor interactions; thus, we consider ∣R∣=0|\mathbf{R}| = 0 or ∣R∣=λ|\mathbf{R}| = \lambda, where λ\lambda is the moiré length. Furthermore, we remain agnostic regarding the value of the dielectric function ϵ\epsilon since a range of values from ϵ∼4\epsilon\sim4 to 12 have been used in the literature [37, 40, 53, 54, 55]. In general, the value of ϵ\epsilon varies spatially and depends on specific experimental conditions, such as encapsulation with hexagonal boron nitride. Here we treat ϵ\epsilon as a constant and report values of UϵU\epsilon and JϵJ\epsilon. A careful first-principles calculation of ϵ\epsilon is an important next step.

Figure 5 (a) shows the on-site and nearest-neighbor Coulomb interactions, Unm(0)U_{nm}(0) and Unm(λ)U_{nm}(\lambda), for each orbital type. The AA orbitals exhibit the largest Coulomb interactions, with Unm(0)ϵU_{nm}(0)\epsilon in the range of 450 to 550 meV for twist angles between 0.93∘0.93^\circ and 1.41∘1.41^\circ. The on-site interactions in the

Figure 5. Coulomb and exchange interactions in the ten-band model. (a) On-site (circles) and nearest-neighbor (squares) Coulomb interactions as a function of twist angle. Nearest-neighbor interactions are calculated between the same Wannier orbital in neighboring moiré cells. (b) Coulomb interactions UnmϵU_{nm}\epsilon and exchange interactions JnmϵJ_{nm}\epsilon (denoted collectively as XnmϵX_{nm}\epsilon, with X=UX = U or JJ) between all pairs of distinct orbitals as a function of the distance rr between the orbitals, all for θ=1.05∘\theta= 1.05^\circ. Colors correspond to the orbital types involved in the interaction. The black dashed curve fit to the Coulomb interactions is proportional to 1/r1/r, while the red dashed curve fit to the exchange interactions is proportional to e−0.024re^{-0.024r} (with rr in units of Å).

AB/BA and DW orbitals are somewhat weaker. All on-site Unm(0)U_{nm}(0) values decrease roughly linearly as the twist angle decreases, with the interactions of the AA orbitals decreasing more slowly than the other orbital types. The nearest-neighbor interactions in Figure 5 (a) are computed for the same Wannier orbital located in nearest-neighbor moiré cells. They are generally 1/4 to 1/3 the size of the on-site interactions and almost identical for the different orbital types, indicating that all Wannier orbitals have decayed significantly and to a similar extent after one moiré length.

Figure 5 (b) shows the Coulomb interactions between orbitals of different types as a function of the distance rr between the orbital centers for a single twist angle θ=1.05∘\theta= 1.05^\circ. The Coulomb interactions decrease proportionally with 1/r1/r when rr is greater than half of the moiré length λ\lambda, independent of the twist angle. In fact, for all twist angles between 0.93∘0.93^\circ and 1.41∘1.41^\circ, the Coulomb interactions decrease with the same ∼15000/r\sim15000/r scaling (with rr in units of Å), indicating that the magnitude of interactions between different orbitals produced by WANNIER90 is determined predominantly by the distance separating them, not the twist angle or orbital type.

The exchange interactions between orbitals of different types are also shown in Figure 5 (b). All exchange interactions are on the order of Jε∼10J_{\varepsilon} \sim10 meV or smaller, less than 5% of the on-site Coulomb interactions. Furthermore, they decrease exponentially as the distance between the orbitals increases.

Electronic states with increased interlayer interactions

Finally, we study the effect of increased interlayer interactions on the Wannier states, achieved via compression of the layers of TBG using the same procedure as Ref. [48]. Letting zz denote the mean distance between the two layers, we define Δz\Delta z as the amount by which zz is perturbed from its equilibrium value, with negative Δz\Delta z corresponding to compression. For each structure characterized by a specific Δz\Delta z value, we Wannierize the same set of 20 DFT bands using the same trial orbitals and kk-point grid of Bloch states, as described in § 1.1.

Figure 6 shows the results of the Wannierization procedure for θ=1.08∘\theta=1.08^\circ TBG for various values of Δz\Delta z. We observe that compression of the layers has the largest impact on the DW orbitals. For example, in Figure 6 (a), as the amount of compression increases (corresponding to a more negative Δz\Delta z value), the radius of the DW orbitals decreases significantly from ∼70\sim70 Å for uncompressed layers to ∼60\sim60 Å for a compression of 0.090.09 Å. The radius of the AB/BA orbitals also decreases slightly, while the radius of the AA orbitals is essentially unchanged. The decreased radius of the DW orbitals is accompanied by a shift in their centers towards the AA regions, also shown in Figure 6 (a). In contrast, the AA orbital centers shift slightly away from the AA regions upon compression of the layers. When the compression reaches Δz=−0.08\Delta z=-0.08 Å, we observe an exchange of projected orbital character between the upper and lower flat bands near Γ\Gamma, consistent with the exchange of wavefunction character reported in Ref. [48]. Such an exchange also occurs when the twist angle decreases to 0.93∘0.93^\circ.

Figure 6. Wannierization of compressed TBG layers for a twist angle of 1.08∘1.08^\circ. (a) Radius (solid lines) and distance from AA site (dashed lines) of different Wannier orbitals as a function of compression. (b) On-site (circles) and nearest-neighbor (squares) Coulomb interactions of different orbitals as a function of compression.

Figure 6 (b) shows the on-site and nearest-neighbor Coulomb interactions of the Wannier orbitals for compressed layers. As the compression increases, the on-site interactions of the DW orbitals increase significantly from Unn(0)ε∼320U_{nn}(0)\varepsilon\sim320 meV at Δz=0\Delta z=0 to Unn(0)ε≳400U_{nn}(0)\varepsilon\gtrsim400 meV at Δz=−0.09\Delta z=-0.09 Å, mirroring the trend in the radius and center of the DW orbitals. The on-site interactions of the AA and AB/BA orbitals also increase slightly as the layers are compressed. In contrast, the nearest-neighbor interactions remain constant and almost exactly the same for all orbital types.

Discussion

Symmetry and hopping parameters

Compared to the orbitals in previous tight-binding and many-body models of TBG [39, 40, 41, 44], the orbitals produced by the first-principles Wannierization in this work differ slightly in their positions in the moiré unit cell. For example, previous models include p⊥p_\perp and pzp_z orbitals centered at triangular lattice sites and ss orbitals at Kagome lattice sites. In comparison, the orbitals directly produced by WANNIER90 are systematically offset from the triangular and Kagome lattice sites. We attribute this feature to differences in the Wannierization procedures. For example, in the ten-band model of Ref. [39], the Wannier orbitals are centered at the triangular and Kagome lattice sites, whereas no such constraints were imposed in our use of WANNIER90. Furthermore, WANNIER90 is designed to “maximally localize” the total spread of the orbitals without explicit consideration of the orbital symmetry. Nevertheless, we symmetrize the orbitals and tight-binding Hamiltonians to extract the relevant physics and compare with previous tight-binding and many-body models of TBG. A detailed discussion of the symmetrization procedure is provided in Appendix A.

The symmetrized version of the WANNIER90 model satisfies all TBG symmetries exactly, and obeys the representation matching equation that has been shown to resolve the topological obstruction in TBG [44]. The symmetrization procedure produces the following set of ten basis orbitals,

(τ,pz)AA⊕(τ,p±)AA⊕(τ,s)DW⊕(τ,p±)DW⊕(η,p±),(7)(\tau,p_z)_{\mathrm{AA}} \oplus(\tau,p_{\pm})_{\mathrm{AA}} \oplus(\tau,s)_{\mathrm{DW}} \oplus(\tau,p_{\pm})_{\mathrm{DW}} \oplus(\eta,p_{\pm}), \tag*{(7)}

where τ\tau and η\eta denote the centers of the Wannier orbitals and correspond to the triangular and honeycomb lattices, respectively, and ss, pzp_z, and p±p_{\pm} refer to the atomic-like symmetry of the Wannier orbitals, tabulated in Table I. We use the subscript AA (DW) to denote orbitals that are predominantly composed of the original AA (DW) orbitals (∼80%\sim80\% to 90%90\%). We refer to this new basis as the “symmetrized basis.”

Orbital characterC3C_3C2yC_{2y} (MyM_y)C2TC_2T
ssssssss
pzp_zpzp_z−pz-p_zpzp_z
p+p_+ωp+\omega p_+p−p_-p−p_-
p−p_-ω∗p−\omega^* p_-p+p_+p+p_+

Table I. Transformation of the different orbital characters under the C3C_3, C2yC_{2y}, and C2TC_2T symmetries [44]. We let ω=e2πi/3\omega=e^{2\pi i/3}. Because C2TC_2T is antiunitary, its entries are defined only once the phases of the orbitals are chosen (see Appendix A for details). C2TC_2T additionally exchanges the AB and BA sites, whereas C3C_3 and C2yC_{2y} leave them fixed.

Figure 7 shows the τ\tau-centered symmetrized orbitals for θ=1.05∘\theta= 1.05^\circ, with the orbitals produced by WANNIER90 in (a) and the symmetrized orbitals in (b). We note that the symmetrized orbitals, especially (τ,s)DW(\tau,s)_{\mathrm{DW}}, (τ,pz)AA(\tau,p_z)_{\mathrm{AA}}, and (τ,p±)DW(\tau,p_{\pm})_{\mathrm{DW}}, are more delocalized than the orbitals directly obtained by WANNIER90. Furthermore, the symmetrized orbitals do not perfectly respect the symmetries outlined in Table I. Due to the atomic-scale details of the orbitals, achieving exact symmetry in the orbitals would require a more complicated procedure, such as symmetry-adapted Wannierization [56, 57].

Figure 7. Transformation of the original Wannier orbitals to the basis in Eq. (7). (a) Original Wannier orbitals produced by WANNIER90. (b) Symmetrized Wannier orbitals (for details see Appendix). The inset at the bottom of each panel gives the on-site energies of the orbitals relative to EFE_{\mathrm{F}}.

In Figure 8 we show the band structures obtained from the original Wannier orbitals and the symmetrized orbitals, along with the contribution of each type of orbital. First, we note that the flat bands and closest remote bands remain nearly unchanged upon symmetrization. Only the farthest remote bands are affected, and they are ∼200\sim200 meV away from the CNP and thus unimportant for the low-energy physics of TBG. This result highlights the importance of including all ten bands in an accurate, first-principles Wannierization of TBG: the most remote bands may not be reproduced accurately under the symmetries of TBG, but they act as a buffer such that the low-energy bands of interest can be reproduced with high fidelity.

Figure 8. Projected bands in the ten-band model. (a) Projection onto the original basis: AA, DW, and AB/BA orbitals. (b) Projection onto the symmetrized basis: (τ,p±)AA(\tau,p_{\pm})_{\mathrm{AA}}, (τ,pz)AA(\tau,p_z)_{\mathrm{AA}}, (τ,p±)DW(\tau,p_{\pm})_{\mathrm{DW}}, (τ,s)DW(\tau,s)_{\mathrm{DW}}, and (η,p±)(\eta,p_{\pm}).

Additionally, it is evident from this analysis that the dominant contributions to the flat bands come from the (τ,p±)AA(\tau,p_{\pm})_{\mathrm{AA}} orbitals throughout the mBZ, except in the neighborhood of Γ\Gamma, where significant contributions come from (τ,pz)AA(\tau,p_z)_{\mathrm{AA}}, an AA-related orbital (for electron states) and (τ,s)DW(\tau,s)_{\mathrm{DW}}, a DW-related orbital (for hole states). These features are consistent with the topological obstruction of the flat bands [44]. The DW orbitals, particularly (τ,s)DW(\tau,s)_{\mathrm{DW}}, make a significant contribution to the flat bands near Γ\Gamma, as well as to the more dispersive bands through the rest of the mBZ. Finally, the (η,p±)(\eta,p_{\pm}) AB/BA-related orbitals do not contribute to the flat bands, but rather to the dispersive bands throughout the mBZ.

The predominance of the (τ,p±)DW(\tau,p_{\pm})_{\mathrm{DW}} and (η,p±)(\eta,p_{\pm}) orbitals in the dispersive bands is consistent with the observation that hoppings involving these orbitals tend to be the largest in magnitude. For example, as shown in Table A1, the hopping between (τ,p±)DW(\tau,p_{\pm})_{\mathrm{DW}} and (η,p±)(\eta,p_{\pm}) orbitals is the largest of all intracell hoppings, and as shown in Table A2, the largest intercell hoppings involve the (τ,p±)DW(\tau,p_{\pm})_{\mathrm{DW}} orbitals. The full set of hopping coefficients for angles between θ=0.93∘\theta= 0.93^\circ and θ=1.05∘\theta= 1.05^\circ is provided in [58]. For angles above θ=1.05∘\theta= 1.05^\circ, the symmetrized model is unable to accurately reproduce the DFT band structure, indicating that the symmetry breaking during Wannierization was too severe to be undone.

pzp_zp+AAp^{\mathrm{AA}}_+p−AAp^{\mathrm{AA}}_-ssp+DWp^{\mathrm{DW}}_+p−DWp^{\mathrm{DW}}_-p+ABp^{\mathrm{AB}}_+p−ABp^{\mathrm{AB}}_-p+BAp^{\mathrm{BA}}_+p−BAp^{\mathrm{BA}}_-
pzp_z−30.40-30.40−0−-0-−0−-0-−0−-0-−0−-0-−0−-0-25.1025.1025.1025.1025.1025.1025.1025.10
p+AAp^{\mathrm{AA}}_+−10.17-10.17−0−-0-−0−-0-12.7012.70−0−-0-9.659.6517.8617.869.659.6517.8617.86
p−AAp^{\mathrm{AA}}_-−10.17-10.17−0−-0-−0−-0-12.7012.7017.8617.869.659.6517.8617.869.659.65
ss−45.39-45.39−0−-0-−0−-0-26.3926.3926.3926.3926.3926.3926.3926.39
p+DWp^{\mathrm{DW}}_+−99.76-99.76−0−-0-11.3611.3641.7641.7611.3611.3641.7641.76
p−DWp^{\mathrm{DW}}_-−99.76-99.7641.7641.7611.3611.3641.7641.7611.3611.36
p+ABp^{\mathrm{AB}}_+74.2474.24−0−-0-23.7423.7415.6215.62
p−ABp^{\mathrm{AB}}_-74.2474.2415.6215.6223.7423.74
p+BAp^{\mathrm{BA}}_+74.2474.24−0−-0-
p−BAp^{\mathrm{BA}}_-74.2474.24

Table A1. On-site energies and magnitude of hoppings (in meV) between orbitals at positions denoted by the red markers in Figure A1, for θ=1.05∘\theta=1.05^\circ. “−0−-0-” denotes that the hopping is forbidden by symmetry.

pzp_zp+AAp^{\mathrm{AA}}_+p−AAp^{\mathrm{AA}}_-ssp+DWp^{\mathrm{DW}}_+p−DWp^{\mathrm{DW}}_-p+ABp^{\mathrm{AB}}_+p−ABp^{\mathrm{AB}}_-p+BAp^{\mathrm{BA}}_+p−BAp^{\mathrm{BA}}_-
pzp_z6.256.252.312.314.234.232.422.4210.9810.982.932.933.073.073.073.073.073.073.073.07
4.234.232.312.312.932.9310.9810.98
p+AAp^{\mathrm{AA}}_+1.341.343.183.181.641.645.765.762.002.001.661.661.961.961.661.661.961.96
0.860.861.761.760.420.424.244.24
p−AAp^{\mathrm{AA}}_-1.341.341.761.764.244.240.420.421.961.961.661.661.961.961.661.66
1.641.642.002.005.765.76
ss4.544.543.863.866.026.022.942.942.942.942.942.942.942.94
6.026.023.863.86
p+DWp^{\mathrm{DW}}_+10.5610.565.355.355.415.412.242.245.415.412.242.24
7.027.02
p−DWp^{\mathrm{DW}}_-10.5610.562.242.245.415.412.242.245.415.41
p+ABp^{\mathrm{AB}}_+2.902.904.254.252.042.043.253.25
2.942.94
p−ABp^{\mathrm{AB}}_-2.902.903.253.252.042.04
p+BAp^{\mathrm{BA}}_+2.902.904.254.25
2.942.94
p−BAp^{\mathrm{BA}}_-2.902.90

Table A2. Magnitude of hoppings (in meV) between orbitals at positions denoted by the orange markers in Figure A1, for θ=1.05∘\theta=1.05^\circ. Cells with two entries correspond to the two distinct sets of equidistant C3C_3-related neighbors (filled and empty markers in Figure A1) that can have different hopping magnitudes.

We next discuss the twist-angle dependence of the nearest-neighbor hoppings and on-site energies, shown in Figure 9. The greatest changes involve the (τ,s)DW(\tau,s)_{\mathrm{DW}} orbital. As the twist angle decreases, the on-site energy of the (τ,s)DW(\tau,s)_{\mathrm{DW}} orbital increases sharply compared to the on-site energy of the (τ,p±)AA(\tau,p_{\pm})_{\mathrm{AA}} and (τ,pz)AA(\tau,p_z)_{\mathrm{AA}} orbitals, mirroring a decrease in the hopping between nearest-neighbor (τ,s)DW(\tau,s)_{\mathrm{DW}} orbitals. In contrast, the hoppings between other nearest-neighbor orbitals remain relatively constant even as the twist angle decreases. (We note that although the on-site energy of the (τ,p±)DW(\tau,p_{\pm})_{\mathrm{DW}} orbitals also increases by ∼50\sim50 meV over this range, those orbitals are predominant in the lowest-energy remote bands.) The decrease in magnitude of dominant hoppings involving the (τ,s)DW(\tau,s)_{\mathrm{DW}} orbitals as the twist angle decreases from 1.05∘1.05^\circ to 0.93∘0.93^\circ is consistent with the rapidly decreasing dispersion of the lower flat band near the Γ\Gamma point, where the (τ,s)DW(\tau,s)_{\mathrm{DW}} orbital dominates. Furthermore, between 0.96∘0.96^\circ and 0.93∘0.93^\circ, the character of the flat bands inverts near Γ\Gamma, and during the inversion, the dispersion near Γ\Gamma becomes very small, mirroring the decrease of the (τ,s)DW(\tau,s)_{\mathrm{DW}} nearest-neighbor hopping to below 0.10.1 meV. This is an interesting finding: as the twist angle decreases, and the moiré scale increases, the on-site energy of the DW symmetrized orbitals increases by around 5050 meV relative to the on-site energies of the (τ,pz)AA(\tau,p_z)_{\mathrm{AA}} and (τ,p±)AA(\tau,p_{\pm})_{\mathrm{AA}} orbitals, while the hopping between (τ,s)DW(\tau,s)_{\mathrm{DW}} orbitals at nearest-neighbor sites within the moiré cell, which used to be significant at 55 meV, becomes almost negligible.

Figure 9. (a) Magnitude of dominant hoppings involving orbitals with significant weight in the flat bands. For (τ,p±)AA(\tau,p_{\pm})_{\mathrm{AA}}–(τ,p∓)AA(\tau,p_{\mp})_{\mathrm{AA}}, which contains distinct hoppings in two different C3C_{3} orientations (see Appendix A), the hoppings of larger magnitude are shown. (b) On-site energy of the (τ,s)DW(\tau,s)_{\mathrm{DW}}, (τ,pz)AA(\tau,p_{z})_{\mathrm{AA}}, (τ,p±)AA(\tau,p_{\pm})_{\mathrm{AA}}, and (τ,p±)DW(\tau,p_{\pm})_{\mathrm{DW}} orbitals.

The fact that only the hopping between nearest-neighbor (τ,s)DW(\tau,s)_{\mathrm{DW}} orbitals decreases by such a large factor suggests that this hopping plays a major role in determining the dispersion of the flat bands, particularly in the lower flat band near the Γ\Gamma point, since the (τ,s)DW(\tau,s)_{\mathrm{DW}} orbital dominates the character of those electronic states, as shown in Figure 8 (b). The absence of this orbital in the upper flat band near Γ\Gamma, which is instead dominated by the (τ,pz)AA(\tau,p_z)_{\mathrm{AA}} orbital whose hoppings remain relatively constant with twist angle, further suggests that the hoppings between nearest-neighbor (τ,s)DW(\tau,s)_{\mathrm{DW}} orbitals may be responsible for particle-hole asymmetry in superconducting and correlated phases. Such an implication is consistent with experimental evidence thus far showing that superconductivity is more robust with hole doping at angles slightly above 1∘1^\circ [59] and with electron doping at a smaller angle of 0.93∘0.93^\circ [7], corresponding to the angles in our model in which the (τ,s)DW(\tau,s)_{\mathrm{DW}} orbital dominates the lower and upper flat band, respectively. Determining the role of this hopping at different fillings and in the presence of electronic interactions, which have been shown to reshape the bands in both theoretical models and experimental measurements [19, 41, 60], is an important future direction.

Coulomb and exchange integrals

Turning next to a discussion of Coulomb and exchange interactions as described by different theoretical models, Table II gives a comparison of our results calculated with the symmetrized orbitals to those in an eight-band model [40] and the heavy fermion model of TBG [41]. To make such comparisons meaningful due to the different number of orbitals in each model, we compare two types of orbitals: (I) orbitals with significant contributions to the flat bands, and (II) orbitals with secondary contributions to the flat bands. For example, in our work, orbitals of type I are the (τ,p±)AA(\tau,p_{\pm})_{\mathrm{AA}} orbitals while orbitals of type II are the (τ,pz)AA(\tau,p_{z})_{\mathrm{AA}}, (τ,s)DW(\tau,s)_{\mathrm{DW}}, and (τ,p±)DW(\tau,p_{\pm})_{\mathrm{DW}} orbitals. In the heavy fermion model, orbitals of type I are the ff orbitals (which are centered at the triangular lattice sites with p±p_{\pm} symmetry, hence similar in character to our (τ,p±)AA(\tau,p_{\pm})_{\mathrm{AA}} orbitals), while orbitals of type II are the cc orbitals. To compare our values directly with those in the eight-band model, we take ε=12\varepsilon= 12 as used in Ref. [40]. However, as each work assumes a different value of ε\varepsilon and different screening potentials, we compare not only the absolute values of the interaction parameters, but also the ratio of each interaction parameter to the on-site Coulomb integral of the type I orbitals in each model, UnnI(0)U_{\mathrm{nn}}^{\mathrm{I}}(0).

This workThis work[40][41]
0.96∘0.96^\circ1.05∘1.05^\circ
UnnI(0)U_{\mathrm{nn}}^{\mathrm{I}}(0) (meV)37394258
UnnII(0)U_{\mathrm{nn}}^{\mathrm{II}}(0) (meV)23212148
UnnII(0)/UnnI(0)U_{\mathrm{nn}}^{\mathrm{II}}(0)/U_{\mathrm{nn}}^{\mathrm{I}}(0)0.620.540.50.83
Unn(∣R∣=λ)U_{\mathrm{nn}}(|\mathbf{R}|=\lambda) (meV)8.89.69.42.3
Unn(∣R∣=λ)/UnnI(0)U_{\mathrm{nn}}(|\mathbf{R}|=\lambda)/U_{\mathrm{nn}}^{\mathrm{I}}(0)0.240.240.220.04
JnmJ_{\mathrm{nm}} (meV)≤6.7\leq6.7≤6.2\leq6.2≤3\leq316
Jnm/UnnI(0)J_{\mathrm{nm}}/U_{\mathrm{nn}}^{\mathrm{I}}(0)≤0.18\leq0.18≤0.16\leq0.16≤0.07\leq0.070.28

Table 2. Comparison of Coulomb and exchange interaction parameters in our ten-band model (taking ε=12\varepsilon= 12), an eight-band model [40], and a heavy fermion model [41], all with θ=1.05∘\theta= 1.05^\circ; for our model, values at θ=0.96∘\theta= 0.96^\circ are also shown. UnnI(0)U_{\mathrm{nn}}^{\mathrm{I}}(0) denotes the on-site interactions of the type I orbitals (those predominant in the flat bands), and UnnII(0)U_{\mathrm{nn}}^{\mathrm{II}}(0) denotes the on-site interactions of the type II orbitals (those predominant in the remote bands with secondary contribution to the flat bands).

In Table II, we report comparisons of our Coulomb and exchange interaction values in the symmetrized basis with Refs. [40] and [41]. We show values at two twist angles, 1.05∘1.05^\circ and 0.96∘0.96^\circ (the magic angle in our DFT calculations), and find that they are similar. As such, we primarily compare the values calculated at 1.05∘1.05^\circ. With ε=12\varepsilon= 12, we find a value of UnnI(0)=39U_{\mathrm{nn}}^{\mathrm{I}}(0) = 39 meV at θ=1.05∘\theta= 1.05^\circ, in reasonable agreement with UnnI(0)∼42U_{\mathrm{nn}}^{\mathrm{I}}(0) \sim42 meV for the corresponding orbitals in Ref. [40] (Table II, first row). The on-site interactions for our type II orbitals, UnnII(0)U_{\mathrm{nn}}^{\mathrm{II}}(0), are also similar to those in Ref. [40], both in their absolute values and ratios to the type I on-site UU in each model (Table II, second row). This result may be expected due to the similarity in the character and positions of the orbitals in each model.

Comparison of the absolute value of on-site interaction terms with the heavy fermion model is more difficult due to its use of a more complex dielectric screening potential. Furthermore, it should be noted that the on-site interactions of the ff orbitals in the heavy fermion model are sensitive to the parameters chosen for the Bistritzer–MacDonald model [22], such as vFv_{\mathrm{F}} and w0/w1w_{0}/w_{1}, and can vary from approximately 37 to 70 meV for reasonable choices of parameters [41]. However, taking a representative value of UnnI(0)∼58U_{\mathrm{nn}}^{\mathrm{I}}(0) \sim58 meV for the ff orbitals and UnnII(0)∼48U_{\mathrm{nn}}^{\mathrm{II}}(0) \sim48 meV for the cc orbitals in the heavy fermion model, we find that the ratio of cc to ff on-site interactions is larger than the ratio of type II to type I on-site interactions in the symmetrized Wannier model, as shown in the second row of Table II.

The third row of Table II compares the nearest-neighbor Coulomb interactions in these three models. Because the nearest-neighbor interactions in our model and in Ref. [40] are nearly independent of orbital type, comparisons can be made without classifying the orbitals. The nearest-neighbor interactions in our model and in Ref. [40] are quite close, while the nearest-neighbor interactions between ff orbitals in the heavy fermion model are significantly smaller, suggesting that the ff orbitals in the heavy fermion construction are more localized.

The last row of Table II compares the exchange interaction parameters between type I and type II orbitals in our model with those in the other two models. Since the exchange interactions in our model and the eight-band model span a range of values depending on the specific orbitals involved, we compare the largest exchange interaction in the eight-band model and in our model, which is between the (τ,p±)AA(\tau,p_{\pm})_{\mathrm{AA}} and (τ,pz)AA(\tau,p_z)_{\mathrm{AA}} orbitals, against the exchange interaction between the ff and cc orbitals in the heavy fermion model. We find that the ratio of the exchange interaction to the type I on-site UU in our model is ∼0.16\sim0.16, larger than the ratio of ∼0.07\sim0.07 in the eight-band model and smaller than the ratio of ∼0.28\sim0.28 for the exchange interaction between the ff and cc orbitals in the heavy fermion model. Note that the exchange value we report is between orbitals in the symmetrized basis, whereas those reported in Figure 5 are between orbitals in the original WANNIER90 basis.

Conclusions

In this work we have presented tight-binding models with real-space Wannier orbitals for TBG over a range of twist angles including the magic angle, derived entirely from first principles. By Wannierizing the 20 DFT bands closest to the Fermi level, we obtain a ten-band model for each of the two valleys. Using the real-space orbitals, we compute on-site and nearest-neighbor Coulomb interaction parameters, finding that the on-site interaction values of the AA orbitals are largest and decrease with decreasing twist angle, while the nearest-neighbor interaction values are approximately one quarter of the on-site interaction values and nearly independent of orbital type. We study the effect of increased interlayer interactions on the Wannier states by compressing the layers of TBG, finding that the DW orbitals are most affected by compression and confirming that a critical interlayer interaction strength exists at which an exchange of character occurs between the upper and lower flat bands. Finally, we symmetrize the tight-binding models and orbitals and observe hoppings between certain flat-band orbitals to exhibit a strong dependence on the twist angle within the magic range.

The detailed comparison of various interactions leads us to expect that in a Hubbard-like model based on the Wannier states the nearest-neighbor Coulomb interactions will play a larger role than they would in a model based on the heavy fermion approach. However, the on-site interactions in our model are still by far the dominant energy scale, and thus we expect them to play the largest role in many-body models. Hartree–Fock calculations will be an important future step to draw further comparisons between our models and similar works [40, 41, 60] and to determine the importance of the different interactions for the many-body physics of TBG. By using the orbitals and interactions in our ten-band model as input for such calculations, we open the possibility of modeling the many-body physics of TBG entirely from first principles to make more rigorous comparisons with experimental observations of the many-body ground state of TBG.

Acknowledgments

The authors acknowledge support from the Simons Foundation award No. 896626. A.Z. is supported by the U.S. Department of Energy, Office of Science, Office of Advanced Scientific Computing Research, Department of Energy Computational Science Graduate Fellowship under Award Number DE-SC0025528. D.B. acknowledges support from the NTU Startup Grant (Award Number 025661-00003). M.M.A.E. acknowledges support from the Ministry of Education, Singapore (Research Centre of Excellence award to the Institute for Functional Intelligent Materials, I-FIM, project No. EDUNC-33-18-279-V12) and the National Research Foundation, Singapore, under its AI Singapore Programme (AISG Award No: AISG3-RP-2022-028). E. M. acknowledges the hospitality of the Harvard Physics Department, where part of this work was done. Computing resources were provided by the Harvard University FAS Division of Science Research Computing Group and the Texas Advanced Computing Center (TACC) at The University of Texas at Austin.

Data Availability

Relaxed atomic structures, DFT band structures, and symmetrized tight-binding model parameters are publicly available at the GitHub link in [58].

Use of AI Tools

The authors used Claude Code (Opus 5) to assist with the implementation of the symmetrization procedure of the tight-binding Hamiltonians and orbitals described in the Appendix. All AI-generated code was independently verified by the authors who take full responsibility for the accuracy of the content of this manuscript.

Symmetrization of the Wannier90 tight-binding model

Symmetry operations and representation matrices

The tight-binding Hamiltonians produced by WANNIER90 do not exactly obey the lattice symmetries of TBG. This is an artifact of the Wannierization rather than a property of the underlying physics, as it was previously shown that the relaxed structure of TBG obeys a universal D6D_6 symmetry [61]. Here we show that the tight-binding models can be projected onto a subspace of Hamiltonians that exactly obey these symmetries. We note that an alternative route is to impose the symmetry during the Wannierization itself, constraining the spread minimization so that the orbitals come out symmetry-adapted by construction [56, 57]. However, symmetry-adapted Wannierization requires symmetry information about the Bloch states that the interface between SIESTA and WANNIER90 does not currently provide.

Working within a single valley, the relevant operations are those that do not exchange the two valleys: C3C_{3}, a threefold rotation about the zz-axis defined to be perpendicular to the plane of the bilayer; C2yC_{2y}, a twofold rotation about the yy-axis defined to be parallel to the plane of the bilayer (sometimes referred to as MyM_{y} in purely 2D models); and C2TC_{2}T, a twofold rotation about the zz-axis followed by time-reversal symmetry (complex conjugation). The operations C3C_{3}, C2yC_{2y}, C2TC_{2}T, and their compositions form a group GG with ∣G∣=12|G|=12 elements acting within a single valley. Defining D(g)D(g) to be the 10×1010 \times10 representation matrix of g∈Gg \in G in the basis of the 10 Wannier orbitals ∣wn⟩|w_{n}\rangle of a single valley, we have

g∣wn⟩=∑mDmn(g)∣wm⟩,(8)g|w_{n}\rangle= \sum_{m}D_{mn}(g)|w_{m}\rangle, \tag*{(8)}

with D(g)†D(g)=ID(g)^{\dagger}D(g)=I for every g∈Gg \in G (both unitary and antiunitary). Furthermore, in a composition gigjg_{i}g_{j} in which gjg_{j} acts first, D(gigj)=D(gi)D(gj)D(g_{i}g_{j})=D(g_{i})D(g_{j}) if gig_{i} is unitary and D(gigj)=D(gi)D(gj)∗D(g_{i}g_{j})=D(g_{i})D(g_{j})^{*} if gig_{i} is antiunitary, in either case irrespective of whether gjg_{j} is unitary or antiunitary. Let gRg\mathbf{R} denote the image of a moiré lattice vector R\mathbf{R} under gg, and gkg\mathbf{k} the image of a momentum vector k\mathbf{k}, which for antiunitary gg includes the reversal k→−k\mathbf{k}\to-\mathbf{k} due to TT. A matrix of hoppings H(R)H(\mathbf{R}) from orbitals in the unit cell translated by R\mathbf{R} to orbitals in the home cell must then satisfy

H(gR)=D(g)H(R)D(g)†,(9)H(g\mathbf{R})=D(g)H(\mathbf{R})D(g)^{\dagger}, \tag*{(9)}

with complex conjugation applied to H(R)H(\mathbf{R}) if gg is antiunitary. Equivalently, in terms of the Bloch Hamiltonian H(k)=∑Reik⋅RH(R)H(\mathbf{k})=\sum_{\mathbf{R}}e^{i\mathbf{k}\cdot\mathbf{R}}H(\mathbf{R}),

H(gk)=D(g)H(k)D(g)†,(10)H(g\mathbf{k})=D(g)H(\mathbf{k})D(g)^{\dagger}, \tag*{(10)}

again with H(k)H(\mathbf{k}) conjugated if gg is antiunitary.

Determining the representation matrices

The matrices D(g)D(g) are not known in advance. WANNIER90 returns the orbitals in a basis that minimizes the total spread of the orbitals, so the way each operation permutes and mixes the basis orbitals must be measured from the model itself. We do this by fitting D(g)D(g) to satisfy Eq. (10) using the WANNIER90 Hamiltonian H0H_{0}, one generator at a time. Only the matrices of the three generators, D(C3)D(C_{3}), D(C2y)D(C_{2y}), and D(C2T)D(C_{2}T), are fitted; the representations of the remaining nine elements of GG are obtained from them by composition. For a fixed gg, define

Bg(k)={H0(g−1k),g unitary,H0(g−1k)∗,g antiunitary,(11)B_{g}(\mathbf{k})= \begin{cases} H_{0}(g^{-1}\mathbf{k}), & g\text{ unitary},\\ H_{0}(g^{-1}\mathbf{k})^{*}, & g\text{ antiunitary}, \end{cases} \tag*{(11)}

so that Eq. (10) becomes D(g)Bg(k)D†(g)=H0(k)D(g)B_{g}(\mathbf{k})D^{\dagger}(g)=H_{0}(\mathbf{k}) at every k\mathbf{k}. Since no D(g)D(g) satisfies this equality exactly due to the broken symmetries, we take D(g)D(g) to be the unitary matrix that minimizes the difference,

D(g)=arg min⁡D†D=I∑k∥H0(k)−DBg(k)D†∥2,(12)D(g)=\underset{D^{\dagger}D=I}{\operatorname{arg\,min}}\sum_{\mathbf{k}}\left\|H_{0}(\mathbf{k})-DB_{g}(\mathbf{k})D^{\dagger}\right\|^{2}, \tag*{(12)}

where ∥X∥\|X\| is the Frobenius norm of XX, ∥X∥2=∑ij∣Xij∣2\|X\|^{2}=\sum_{ij}|X_{ij}|^{2}, and the sum runs over a uniform 12×1212\times12 grid of k\mathbf{k} points in the mBZ. Equation (A5) is a two-sided orthogonal Procrustes problem [62], which has no closed-form solution due to the sum over k\mathbf{k}. We thus solve it by iterating

D(i+1)=P[U(∑kH0(k)D(i)Bg(k)†)](13)D^{(i+1)}=\mathcal{P}\left[\mathcal{U}\left(\sum_{\mathbf{k}}H_{0}(\mathbf{k})D^{(i)}B_{g}(\mathbf{k})^{\dagger}\right)\right] \tag*{(13)}

from an initial guess D(0)D^{(0)}, where the superscript labels the iteration, until the maximum element of ∣D(i+1)−D(i)∣|D^{(i+1)}-D^{(i)}| becomes less than 10−1110^{-11} or 500 iterations are reached. Several initial guesses D(0)D^{(0)} are used, and the one that achieves the minimum of Eq. (12) is taken as D(g)D(g).

In each iteration, we first form the matrix X=∑kH0(k)D(i)Bg(k)†X=\sum_{\mathbf{k}}H_{0}(\mathbf{k})D^{(i)}B_{g}(\mathbf{k})^{\dagger} appearing in Eq. (13) and compute Y=U(X)=UV†Y=\mathcal{U}(X)=UV^{\dagger}, the unitary matrix nearest to XX, where UU and VV come from the singular value decomposition X=UΣV†X=U\Sigma V^{\dagger} [63]. Each iteration thereby holds D†D^{\dagger} constant on the right-hand side of Eq. (12) fixed at its current value, which leaves a one-sided Procrustes problem that Y=UV†Y=UV^{\dagger} solves exactly [64]. We then compute P(Y)\mathcal{P}(Y), the projection of YY onto the subspace of matrices that possess the structure of a genuine representation of gg. P(Y)\mathcal{P}(Y) first enforces YY to only connect orbitals that can be transformed into each other by gg based on their positions in the moiré cell. Letting ∣wτ⟩|w_{\tau}\rangle denote either an AA orbital ∣wAA⟩|w_{\mathrm{AA}}\rangle or DW orbital ∣wDW⟩|w_{\mathrm{DW}}\rangle, and letting ∣wAB⟩|w_{\mathrm{AB}}\rangle and ∣wBA⟩|w_{\mathrm{BA}}\rangle denote the AB and BA orbitals, respectively,

  • D(C3)D(C_{3}) can only have nonzero elements connecting ∣wτ⟩|w_{\tau}\rangle to other ∣wτ⟩|w_{\tau}\rangle (including itself), ∣wAB⟩|w_{\mathrm{AB}}\rangle to ∣wAB⟩|w_{\mathrm{AB}}\rangle, and ∣wBA⟩|w_{\mathrm{BA}}\rangle to ∣wBA⟩|w_{\mathrm{BA}}\rangle;

  • D(C2y)D(C_{2y}) can only have nonzero elements connecting ∣wτ⟩|w_{\tau}\rangle to ∣wτ⟩|w_{\tau}\rangle, ∣wAB⟩|w_{\mathrm{AB}}\rangle to ∣wAB⟩|w_{\mathrm{AB}}\rangle, and ∣wBA⟩|w_{\mathrm{BA}}\rangle to ∣wBA⟩|w_{\mathrm{BA}}\rangle;

  • D(C2T)D(C_{2}T) can only have nonzero elements connecting ∣wτ⟩|w_{\tau}\rangle to ∣wτ⟩|w_{\tau}\rangle, ∣wAB⟩|w_{\mathrm{AB}}\rangle to ∣wBA⟩|w_{\mathrm{BA}}\rangle, and ∣wBA⟩|w_{\mathrm{BA}}\rangle to ∣wAB⟩|w_{\mathrm{AB}}\rangle.

As a result, D(C3)D(C_{3}) and D(C2y)D(C_{2y}) have 3 diagonal blocks corresponding to the orbitals at each of the three high-symmetry stacking centers (AA, AB, and BA), while D(C2T)D(C_{2}T) has 2 diagonal blocks corresponding to the AA and AB/BA sites. P(Y)\mathcal{P}(Y) imposes further structure on YY for each gg. Since D(C3)3=ID(C_{3})^{3}=I, the eigenvalues λb\lambda_{b} of D(C3)D(C_{3}) are diag⁡(λb)P−1\operatorname{diag}(\lambda_{b})P^{-1} must be the cube roots of unity ωmb\omega^{m_{b}} with mb∈{0,±1}m_{b}\in\{0,\pm1\} and ω=e2πi/3\omega=e^{2\pi i/3}. P\mathcal{P} enforces this structure by rounding each λb\lambda_{b} to the nearest cube root of unity and rebuilding D(C3)D(C_{3}) as Pdiag⁡(ωmb)P−1P\operatorname{diag}(\omega^{m_{b}})P^{-1} with PP being a unitary matrix. Furthermore, within each diagonal block of D(C3)D(C_{3}), the number of eigenvalues with mb=+1m_{b}=+1 must equal the number of eigenvalues with mb=−1m_{b}=-1 as required by C2yC_{2y}; a C2yC_{2y} rotation flips the eigenvalue of an orbital under C3C_{3} and thus must map an orbital with eigenvalue ωmb\omega^{m_{b}} to an orbital with eigenvalue ω−mb\omega^{-m_{b}}. Solutions that do not satisfy this constraint are discarded. Similar structural constraints can be derived for D(C2y)D(C_{2y}) and D(C2T)D(C_{2}T):

  • D(C2y)2=ID(C_{2y})^2=I and D(C2y)†D(C2y)=ID(C_{2y})^\dagger D(C_{2y})=I, so D(C2y)=D(C2y)†D(C_{2y})=D(C_{2y})^\dagger and P\mathcal{P} maps YY to 12(Y+Y†)\frac{1}{2}(Y+Y^\dagger).

  • D(C2T)D(C2T)∗=ID(C_{2T})D(C_{2T})^*=I and D(C2T)†D(C2T)=ID(C_{2T})^\dagger D(C_{2T})=I, so D(C2T)∗=D(C2T)†=(D(C2T)∗)⊤⟹D(C2T)=D(C2T)⊤D(C_{2T})^*=D(C_{2T})^\dagger=(D(C_{2T})^*)^\top\Longrightarrow D(C_{2T})=D(C_{2T})^\top and P\mathcal{P} maps YY to 12(Y+Y⊤)\frac{1}{2}(Y+Y^\top).

Since C2TC_{2T} commutes with C2yC_{2y}, which for an antiunitary D(C2T)D(C_{2T}) requires D(C2T)=D(C2y)D(C2T)D(C2y)⊤D(C_{2T})=D(C_{2y})D(C_{2T})D(C_{2y})^\top rather than ordinary matrix commutation, P\mathcal{P} further maps D(C2T)D(C_{2T}) to 12(D(C2T)+D(C2y)D(C2T)D(C2y)⊤)\frac{1}{2}\left(D(C_{2T})+D(C_{2y})D(C_{2T})D(C_{2y})^\top\right). Unitarity is then restored by a second application of U\mathcal{U}.

The representations of C3C_3, C2yC_{2y}, and C2TC_{2T} are fitted sequentially. D(C3)D(C_3) is fitted first; its eigenvectors define a unitary matrix QQ, and the WANNIER90 Hamiltonian H0H_0 is rotated into this eigenbasis to form HC3=Q†H0QH_{C_3}=Q^\dagger H_0Q. In that basis the representation of C3C_3 becomes diagonal: Q†D(C3)Q=diag⁡(ωmb)Q^\dagger D(C_3)Q=\operatorname{diag}(\omega^{m_b}). D(C2y)D(C_{2y}) and D(C2T)D(C_{2T}) are then both fitted to HC3H_{C_3}, in that same basis, with D(C2T)D(C_{2T}) fitted last so that it can also be required to commute with the D(C2y)D(C_{2y}) just found. With all representations fitted, the tight-binding Hamiltonian produced by WANNIER90 H0H_0 is projected onto a Hamiltonian HprojH_{\mathrm{proj}} that obeys the symmetries of TBG by averaging over the group GG [65]:

Hproj(R)=1∣G∣∑g∈GD(g)H0(g−1R)D(g)†(14)H_{\mathrm{proj}}(\mathbf{R})=\frac{1}{|G|}\sum_{g\in G}D(g)H_0(g^{-1}\mathbf{R})D(g)^\dagger \tag*{(14)}

again with complex conjugation applied to H0H_0 if gg is antiunitary.

Relation to other ten-band models

The construction of HprojH_{\mathrm{proj}} also reveals the relation between the basis of the tight-binding model produced by WANNIER90 and the basis of previously proposed ten-band models, such as that in Ref. [44]. As shown below, the basis of HprojH_{\mathrm{proj}} can be transformed to satisfy the representation-matching equation,

(τ,pz)AA⊕(τ,p±)AA⊕(τ,s)DW⊕(τ,p±)DW⊕(η,p±)0=rep.(η,p±)1⊕(target)⊕(η,p±)2(15)(\tau,p_z)_{\mathrm{AA}}\oplus(\tau,p_\pm)_{\mathrm{AA}}\oplus(\tau,s)_{\mathrm{DW}}\oplus(\tau,p_\pm)_{\mathrm{DW}}\oplus(\eta,p_\pm)_0 \mathrel{\overset{\mathrm{rep.}}{=}}(\eta,p_\pm)_1\oplus(\mathrm{target})\oplus(\eta,p_\pm)_2 \tag*{(15)}

thereby respecting the lattice symmetries of TBG and resolving the topological obstruction. Here, τ\tau and η\eta denote the centers of the Wannier orbitals and correspond to the triangular (AA-stacking) and honeycomb (AB and BA) lattices, respectively. The characters ss, pzp_z, and p±p_\pm refer to the atomic-like symmetry of the Wannier orbitals, with “target” referring to the representations required for the flat bands. (The subscripts 0 to 2 are added following the convention in Ref. [44] to denote that the orbitals have different physical degrees of freedom.) Table I shows the transformation of the ss, pzp_z, and p±p_\pm orbitals under these symmetries.

As a result of the projection previously described, the basis of HprojH_{\mathrm{proj}} possesses the C3C_3 eigenvalues in Table I. To make the other representation matrices, D(C2y)D(C_{2y}) and D(C2T)D(C_{2T}), match those of Table I, we apply a unitary transformation Φ\Phi to HprojH_{\mathrm{proj}},

Hproj(R)⟶Φ†Hproj(R)Φ.(16)H_{\mathrm{proj}}(\mathbf{R})\longrightarrow\Phi^\dagger H_{\mathrm{proj}}(\mathbf{R})\Phi. \tag*{(16)}

Under Φ\Phi, the representation matrices transform as D(g)→Φ†D(g)ΦD(g)\to\Phi^\dagger D(g)\Phi for unitary gg and as D(g)→Φ†D(g)Φ∗D(g)\to\Phi^\dagger D(g)\Phi^* for antiunitary gg. Φ\Phi must preserve the representation D(C3)=diag⁡(ωmb)D(C_3)=\operatorname{diag}(\omega^{m_b}), requiring Φ†D(C3)Φ=D(C3)\Phi^\dagger D(C_3)\Phi=D(C_3), i.e.,

Φab(ωma−ωmb)=0,(17)\Phi_{ab}(\omega^{m_a}-\omega^{m_b})=0, \tag*{(17)}

so that Φab=0\Phi_{ab}=0 unless ma=mbm_a=m_b. Φ\Phi must also not mix orbitals belonging to different stacking centers. Together, these requirements render Φ\Phi block diagonal in stacking site (AA, AB, or BA) and C3C_3 eigenvalue (11, ω\omega, or ω∗\omega^*).

To illustrate how Φ\Phi is determined, we consider the six τ\tau-centered orbitals which contain two orbitals per C3C_3 eigenvalue (Eq. (15)). Thus, the block of Φ\Phi acting on the τ\tau site has the following block-diagonal form,

Φτ=Φ0⊕Φ+⊕Φ−,(18)\Phi_\tau=\Phi_0\oplus\Phi_+\oplus\Phi_-, \tag*{(18)}

where each Φm\Phi_m is a 2×22\times2 unitary matrix acting within the pair of orbitals with C3C_3 eigenvalue ωm\omega^m. To satisfy Table I, Φ0\Phi_0 must satisfy

Φ0†[D(C2y)]0Φ0=(−1001),Φ0†[D(C2T)]0Φ0∗=I,(19)\Phi_0^\dagger[D(C_{2y})]_0\Phi_0= \begin{pmatrix} -1 & 0\\ 0 & 1 \end{pmatrix}, \qquad \Phi_0^\dagger[D(C_{2T})]_0\Phi_0^*=I, \tag*{(19)}

where [D(C2y)]0[D(C_{2y})]_0 and [D(C2T)]0[D(C_{2T})]_0 denote the blocks of the two representation matrices acting on the pair of orbitals with C3C_3 eigenvalue 11. Φ0\Phi_0 can thus be determined by diagonalizing [D(C2y)]0[D(C_{2y})]_0 to find the eigenbasis U0U_0, which determines Φ0\Phi_0 up to phase on each eigenstate:

Φ0=U0diag⁡(eiφ1,eiφ2).(20)\Phi_0=U_0\operatorname{diag}(e^{i\varphi_1},e^{i\varphi_2}). \tag*{(20)}

[D(C2T)]0[D(C_{2T})]_0 is then rotated into the eigenbasis U0U_0, resulting in a unitary diagonal matrix as D(C2T)D(C_{2T}) is unitary and C2TC_{2T} commutes with C2yC_{2y}:

U0†[D(C2T)]0U0∗=diag⁡(eiα1,eiα2).(21)U_0^\dagger[D(C_{2T})]_0U_0^*=\operatorname{diag}(e^{i\alpha_1},e^{i\alpha_2}). \tag*{(21)}

So by Eq. (19), ei(αb−2φb)=1⟹φb=αb/2e^{i(\alpha_b-2\varphi_b)}=1\Longrightarrow\varphi_b=\alpha_b/2, which determines Φ0\Phi_0.

Φ+\Phi_+ and Φ−\Phi_- can be determined in a similar manner. Requiring that C2yC_{2y} and C2TC_{2T} exchange p+p_+ and p−p_- forces the block of D(C2y)D(C_{2y}) and D(C2T)D(C_{2T}) involving those orbitals to take the form (0110)\begin{pmatrix}0&1\\1&0\end{pmatrix}, with the two blocks being labeled by the C3C_3 eigenvalues ω\omega and ω∗\omega^*. Defining [⋅]−+[\cdot]_{-+} as the block of a matrix coupling the p+p_+ and p−p_- orbitals at the τ\tau site, this requirement results in

Φ+†[D(C2y)]−+Φ+=I,Φ−†[D(C2T)]−+Φ+∗=I(22)\Phi_+^\dagger[D(C_{2y})]_{-+}\Phi_+=I,\qquad \Phi_-^\dagger[D(C_{2T})]_{-+}\Phi_+^*=I \tag*{(22)}

Eliminating Φ−\Phi_- between these equations leaves the single condition

Φ+Φ+⊤=S,S=[D(C2y)]−+−1[D(C2T)]−+.(23)\Phi_+\Phi_+^\top=S,\qquad S=[D(C_{2y})]_{-+}^{-1}[D(C_{2T})]_{-+}. \tag*{(23)}

Since SS is a symmetric, unitary matrix, it can be written as S=Vdiag⁡(eiβb)V⊤S=V\operatorname{diag}(e^{i\beta_b})V^\top [66, 67], so

Φ+=Vdiag⁡(eiβb/2)V⊤.(24)\Phi_+=V\operatorname{diag}(e^{i\beta_b/2})V^\top. \tag*{(24)}

where VV is a real orthogonal matrix. We then have Φ−=[D(C2y)]−−−1Φ+\Phi_- = [D(C_{2y})]_{--}^{-1}\Phi_+. Note that Eq. (23) does not fix Φ+\Phi_+ completely. If Φ+\Phi_+ is one solution, then so is Φ+O\Phi_+O for any real orthogonal matrix OO:

(Φ+O)(Φ+O)T=Φ+OOTΦ+T=S.(25)(\Phi_+O)(\Phi_+O)^{\mathsf{T}}=\Phi_+OO^{\mathsf{T}}\Phi_+^{\mathsf{T}}=S. \tag*{(25)}

We choose to tune OO to maximize the difference in the spread between the (τ,p±)AA(\tau,p_{\pm})_{\mathrm{AA}} and (τ,p±)DW(\tau,p_{\pm})_{\mathrm{DW}} orbitals and take the final value of Φ+\Phi_+ to be Φ+O\Phi_+O.

Symmetrized hoppings

We provide the dominant hopping parameters of the symmetrized ten-band model HprojH_{\mathrm{proj}} at θ=1.05∘\theta=1.05^\circ in Table A1 and Table A2, with the full set of hopping parameters for angles down to 0.93∘0.93^\circ available in [58]. The neighbor shells and C3C_3 orbits that these tables refer to are shown in Figure A1.

Orbital positions corresponding to the on-site energies and hoppings listed in Tables A1 and A2

Figure A1. Orbital positions corresponding to the on-site energies and hoppings listed in Tables A1 (red) and A2 (orange). (a) Hoppings from an orbital waw_a centered at τ\tau to an orbital wbw_b centered at τ\tau. (b) Hoppings from an orbital centered at τ\tau to an orbital centered at η\eta. (c) Hoppings from an orbital centered at η\eta to an orbital centered at η\eta. Dashed circles mark hoppings that are equidistant from the central orbital in each panel. Filled and empty markers denote two distinct sets of equidistant C3C_3-related neighbors whose hopping magnitudes can differ. The shaded parallelograms indicate the moiré cell, with lower left corner at τ\tau.

Symmetrization of the orbital basis

In a given valley, each symmetrized orbital ψb(r)\psi_b(\mathbf{r}) is a linear combination of the ten WANNIER90 orbitals wn(r)w_n(\mathbf{r}),

ψb(r)=∑n=110Wnbwn(r),b=1,…,10,(26)\psi_b(\mathbf{r})=\sum_{n=1}^{10}W_{nb}w_n(\mathbf{r}),\qquad b=1,\ldots,10, \tag*{(26)}

where W=QΦW=Q\Phi is assembled from the two basis changes: the rotation QQ into the eigenbasis of the fitted D(C3)D(C_3), which gives every orbital a C3C_3 eigenvalue ωbm\omega^m_b, and the transformation Φ\Phi of Eq. (16), which brings D(C2y)D(C_{2y}) and D(C2T)D(C_{2\mathcal{T}}) to the form of Table I. The ten orbitals that result have the symmetry eigenvalues corresponding to the representations of the left-hand side of Eq. (15). The symmetrization of the Hamiltonian therefore reproduces the representation content of Ref. [44] with no input regarding the shapes of the orbitals.

References

References

  1. [1]Y. Cao, V. Fatemi, S. Fang, K. Watanabe, T. Taniguchi, E. Kaxi- ras, and P. Jarillo-Herrero, Unconventional superconductivity in magic-angle graphene superlattices, Nature 556, 43 (2018).DOI
  2. [2]X. Lu, P. Stepanov, W. Yang, M. Xie, M. A. Aamir, I. Das, C. Urgell, K. Watanabe, T. Taniguchi, G. Zhang, et al., Superconductors, orbital magnets and correlated states in magic- angle bilayer graphene, Nature 574, 653 (2019).DOI
  3. [3]M. Yankowitz, S. Chen, H. Polshyn, Y. Zhang, K. Watanabe, T. Taniguchi, D. Graf, A. F. Young, and C. R. Dean, Tuning su- perconductivity in twisted bilayer graphene, Science 363, 1059 (2019).DOI
  4. [4]M. Oh, K. P. Nuckolls, D. Wong, R. L. Lee, X. Liu, K. Watan- abe, T. Taniguchi, and A. Yazdani, Evidence for unconventional superconductivity in twisted bilayer graphene, Nature 600, 240 (2021).DOI
  5. [5]M. Tanaka, J. í.-j. Wang, T. H. Dinh, D. Rodan-Legraín, S. Za- man, M. Hays, A. Alamanalky, B. Kannan, D. K. Kim, B. M. Niedzielski, et al., Superfluid stiffness of magic-angle twisted bilayer graphene, Nature 638, 99 (2025).DOI
  6. [6]A. Banerjee, Z. Hao, M. Kreidel, P. Ledwith, I. Phinney, J. M. Park, A. Zimmerman, M. E. Wesson, K. Watanabe, T. Taniguchi, et al., Superfluid stiffness of twisted trilayer graphene superconductors, Nature 638, 93 (2025).DOI
  7. [7]E. Codec ido, Q. Wang, R. Koester, C. He, H. Tian, R. Lv, S. Tran, K. Watanabe, T. Taniguchi, F. Zhang, et al., Correlated insulating and superconducting states in twisted bilayer graphene below the magic angle, Sci. Adv. 5, eaaw9770 (2019).
  8. [8]Y. Cao, V. Fatemi, A. Demir, S. Fang, S. L. Tomarken, J. Y. Luo, J. D. Sanchez-Yamagishi, K. Watanabe, T. Taniguchi, E. Kaxiras, et al., Correlated insulator behaviour at half-filling in magic-angle graphene superlattices, Nature 556, 80 (2018).
  9. [9]H. Tian, E. Codec ido, D. Mao, K. Zhang, S. Che, K. Watan- abe, T. Taniguchi, D. Smirnov, E.-A. Kim, M. Bockrath, et al., Dominant 1/3-filling correlated insulator states and orbital ge- ometric frustration in twisted bilayer graphene, Nat. Phys. 20, 1407 (2024).DOI
  10. [10]A. L. Sharpe, E. J. Fox, A. W. Barnard, J. Finney, K. Watanabe, T. Taniguchi, M. Kastner, and D. Goldhaber-Gordon, Emer- gent ferromagnetism near three-quarters filling in twisted bi- layer graphene, Science 365, 605 (2019).DOI
  11. [11]M. Serlin, C. Tschirhart, H. Polshyn, Y. Zhang, J. Zhu, K. Watanabe, T. Taniguchi, L. Balents, and A. Young, Intrin- sic quantized anomalous hall effect in a moiré heterostructure, Science 367, 900 (2020).DOI
  12. [12]K. P. Nuckolls, M. Oh, D. Wong, B. Lian, K. Watanabe, T. Taniguchi, H. A. Bernevig, and A. Yazdani, Strongly corre- lated Chern insulators in magic-angle twisted bilayer graphene, Nature 588, 610 (2020).
  13. [13]S. Wu, Z. Zhang, K. Watanabe, T. Taniguchi, and E. Y. An- drei, Chern insulators, van Hove singularities and topological flat bands in magic-angle twisted bilayer graphene, Nat. Mater. 20, 488 (2021).DOI
  14. [14]Y. Choi, H. Kim, Y. Peng, A. Thomson, C. Lewandowski, R. Polski, Y. Zhang, H. S. Arora, K. Watanabe, T. Taniguchi, et al., Correlation-driven topological phases in magic-angle twisted bilayer graphene, Nature 589, 536 (2021).DOI
  15. [15]Y. Xie, A. T. Pierce, J. M. Park, D. E. Parker, E. Khalaf, P. Ledwith, Y. Cao, S. H. Lee, S. Chen, P. R. Forrester, et al., Fractional Chern insulators in magic-angle twisted bi- layer graphene, Nature 600, 439 (2021).DOI
  16. [16]P. Stepanov, M. Xie, T. Taniguchi, K. Watanabe, X. Lu, A. H. MacDonald, B. A. Bernevig, and D. K. Efetov, Competing zero-field Chern insulators in superconducting twisted bilayer graphene, Phys. Rev. Lett. 127, 197701 (2021).
  17. [17]K. P. Nuckolls, R. L. Lee, M. Oh, D. Wong, T. Soejima, J. P. Hong, D. Călugăru, J. Herzog-Arbeitman, B. A. Bernevig, K. Watanabe, et al., Quantum textures of the many-body wave- functions in magic-angle graphene, Nature 620, 525 (2023).DOI
  18. [18]A. Inbar, J. Birkbeck, J. Xiao, T. Taniguchi, K. Watanabe, B. Yan, Y. Oreg, A. Stern, E. Berg, and S. Ilani, The quantum twisting microscope, Nature 614, 682 (2023).DOI
  19. [19]J. Xiao, A. Inbar, J. Birkbeck, N. Gershon, Y. Zamir, Y. Vituri, T. Taniguchi, K. Watanabe, E. Berg, and S. Ilani, Imaging the flat bands of magic-angle graphene reshaped by interactions, Nature 653, 68 (2026).DOI
  20. [20]R. Krishna Kumar, G. Li, R. Bertini, S. Chaudhary, K. Nowakowski, J. M. Park, S. Castilla, Z. Zhan, P. A. Pan- taleón, H. Agarwal, et al., Terahertz photocurrent probe of quantum geometry and interactions in magic-angle twisted bi- layer graphene, Nat. Mater. 1 (2025).DOI
  21. [21]J. M. B. Lopes dos Santos, N. M. R. Peres, and A. H. Cas- tro Neto, Graphene bilayer with a twist: Electronic structure, Phys. Rev. Lett. 99, 256802 (2007).DOI
  22. [22]R. Bistritzer and A. H. MacDonald, Moire bands in twisted double-layer graphene, PNAS 108, 12233 (2011).
  23. [23]J. M. B. Lopes dos Santos, N. M. R. Peres, and A. H. Castro Neto, Continuum model of the twisted graphene bilayer, Phys. Rev. B 86, 155449 (2012).
  24. [24]S. Carr, S. Fang, Z. Zhu, and E. Kaxiras, Exact contin- uum model for low-energy electronic states of twisted bilayer graphene, Phys. Rev. Res. 1, 013001 (2019).DOI
  25. [25]S. Fang, S. Carr, Z. Zhu, D. Massatt, and E. Kaxiras, Angle- dependent ab initio low-energy hamiltonians for a relaxed twisted bilayer graphene heterostructure, arXiv:1908.00058 (2019).arxiv.org/abs/1908.00058
  26. [26]F. Guinea and N. R. Walet, Continuum models for twisted bi- layer graphene: Effect of lattice deformation and hopping pa- rameters, Phys. Rev. B 99, 205134 (2019).DOI
  27. [27]J. Kang and O. Vafek, Pseudomagnetic fields, particle-hole asymmetry, and microscopic effective continuum hamiltonians of twisted bilayer graphene, Phys. Rev. B 107, 075408 (2023).
  28. [28]O. Vafek and J. Kang, Continuum effective hamiltonian for graphene bilayers for an arbitrary smooth lattice deformation from microscopic theories, Phys. Rev. B 107, 075123 (2023).DOI
  29. [29]W. Miao, C. Li, X. Han, D. Pan, and X. Dai, Truncated atomic plane wave method for subband structure calculations of moiré systems, Phys. Rev. B 107, 125112 (2023).DOI
  30. [30]M. M. A. Ezzi, G. N. Pallewela, C. De Beule, E. J. Mele, and S. Adam, Analytical model for atomic relaxation in twisted moiré materials, Phys. Rev. Lett. 133, 266201 (2024).DOI
  31. [31]G. Trambly de Laissardière, D. Mayou, and L. Magaud, Lo- calization of dirac electrons in rotated graphene bilayers, Nano Lett. 10, 804 (2010).DOI
  32. [32]J. Jung and A. H. MacDonald, Accurate tight-binding models for the π bands of bilayer graphene, Phys. Rev. B 89, 035405 (2014).DOI
  33. [33]S. Fang and E. Kaxiras, Electronic structure theory of weakly interacting bilayers, Phys. Rev. B 93, 235153 (2016).DOI
  34. [34]S. Carr, D. Massatt, S. Fang, P. Cazeaux, M. Luskin, and E. Kaxiras, Twistronics: manipulating the electronic properties of two-dimensional layered structures through their twist angle, Phys. Rev. B 95, 075420 (2017).
  35. [35]B. A. Bernevig, Z.-D. Song, N. Regnault, and B. Lian, Twisted bilayer graphene. I. Matrix elements, approximations, perturbation theory, and a k · p two-band model, Phys. Rev. B 103, 205411 (2021).DOI
  36. [36]D. Bennett, D. T. Larson, L. Sharma, S. Carr, and E. Kaxiras, Twisted bilayer graphene revisited: Minimal two-band model for low-energy bands, Phys. Rev. B 109, 155422 (2024).DOI
  37. [37]M. Koshino, N. F. Q. Yuan, T. Koretsune, M. Ochi, K. Kuroki, and L. Fu, Maximally localized Wannier orbitals and the extended Hubbard model for twisted bilayer graphene, Phys. Rev. X 8, 031087 (2018).
  38. [38]J. Kang and O. Vafek, Symmetry, maximally localized Wannier states, and a low-energy model for twisted bilayer graphene narrow bands, Phys. Rev. X 8, 031088 (2018).DOI
  39. [39]S. Carr, S. Fang, H. C. Po, A. Vishwanath, and E. Kaxiras, Derivation of Wannier orbitals and minimal-basis tight-binding Hamiltonians for twisted bilayer graphene: first-principles approach, Phys. Rev. Res. 1, 033072 (2019).
  40. [40]M. J. Calderón and E. Bascones, Interactions in the 8-orbital model for twisted bilayer graphene, Phys. Rev. B 102, 155149 (2020).DOI
  41. [41]Z.-D. Song and B. A. Bernevig, Magic-angle twisted bilayer graphene as a topological heavy fermion problem, Phys. Rev. Lett. 129, 047601 (2022).DOI
  42. [42]L. Zou, H. C. Po, A. Vishwanath, and T. Senthil, Band structure of twisted bilayer graphene: Emergent symmetries, commensurate approximants, and Wannier obstructions, Phys. Rev. B 98, 085435 (2018).DOI
  43. [43]H. C. Po, L. Zou, A. Vishwanath, and T. Senthil, Origin of Mott insulating behavior and superconductivity in twisted bilayer graphene, Phys. Rev. X 8, 031089 (2018).
  44. [44]H. C. Po, L. Zou, T. Senthil, and A. Vishwanath, Faithful tight-binding models and fragile topology of magic-angle bilayer graphene, Phys. Rev. B 99, 195455 (2019).DOI
  45. [45]J. Ahn, S. Park, and B.-J. Yang, Failure of Nielsen-Ninomiya theorem and fragile topology in two-dimensional systems with space-time inversion symmetry: Application to twisted bilayer graphene at magic angle, Phys. Rev. X 9, 021013 (2019).DOI
  46. [46]Z. Song, Z. Wang, W. Shi, G. Li, C. Fang, and B. A. Bernevig, All magic angles in twisted bilayer graphene are topological, Phys. Rev. Lett. 123, 036401 (2019).DOI
  47. [47]D. Bennett, M. Pizzocchero, J. Junquera, and E. Kaxiras, Accurate and efficient localized basis sets for two-dimensional materials, Phys. Rev. B 111, 125123 (2025).arxiv.org/abs/2411.12566
  48. [48]A. Zhu, D. Bennett, D. T. Larson, M. M. A. Ezzi, E. Manousakis, and E. Kaxiras, Wavefunction textures in twisted bilayer graphene from first principles, Phys. Rev. B 113, L041112 (2026).DOI
  49. [49]A. Zhu, D. Bennett, D. T. Larson, M. M. A. Ezzi, E. Manousakis, and E. Kaxiras, Twisted bilayer graphene from first principles: Structural and electronic properties, Phys. Rev. B 113, 205125 (2026).DOI
  50. [50]J. M. Soler, E. Artacho, J. D. Gale, A. García, J. Junquera, P. Ordejón, and D. Sánchez-Portal, The SIESTA method for ab initio order-N materials simulation, J. Phys. Condens. Matter 14, 2745 (2002).DOI
  51. [51]N. Marzari and D. Vanderbilt, Maximally localized generalized wannier functions for composite energy bands, Phys. Rev. B 56, 12847 (1997).DOI
  52. [52]A. A. Mostofi, J. R. Yates, Y.-S. Lee, I. Souza, D. Vanderbilt, and N. Marzari, wannier90: A tool for obtaining maximally-localised Wannier functions, Computer physics communications 178, 685 (2008).DOI
  53. [53]J. Kang and O. Vafek, Strong coupling phases of partially filled twisted bilayer graphene narrow bands, Phys. Rev. Lett. 122, 246401 (2019).DOI
  54. [54]Z. A. H. Goodwin, F. Corsetti, A. A. Mostofi, and J. Lischner, Attractive electron-electron interactions from internal screening in magic-angle twisted bilayer graphene, Phys. Rev. B 100, 235424 (2019).DOI
  55. [55]Z. A. H. Goodwin, F. Corsetti, A. A. Mostofi, and J. Lischner, Twist-angle sensitivity of electron correlations in moiré graphene bilayers, Phys. Rev. B 100, 121106 (2019).DOI
  56. [56]R. Sakuma, Symmetry-adapted Wannier functions in the maximal localization procedure, Phys. Rev. B 87, 235109 (2013).DOI
  57. [57]G. Pizzi, V. Vitale, R. Arita, S. Blügel, F. Freimuth, G. Géranton, M. Gibertini, D. Gresch, C. Johnson, T. Koretsune, J. Ibáñez-Azpiroz, H. Lee, J.-M. Lihm, D. Marchand, A. Marrazzo, Y. Mokrousov, J. I. Mustafa, Y. Nohara, Y. Nomura, L. Paulatto, S. Poncé, T. Ponweiser, J. Qiao, F. Thöle, S. S. Tsirkin, M. Wierzbowska, N. Marzari, D. Vanderbilt, I. Souza, A. A. Mostofi, and J. R. Yates, Wannier90 as a community code: new features and applications, J. Phys.: Condens. Matter 32, 165902 (2020).
  58. [58]Relaxed atomic structures, electronic bands, and tight-binding Hamiltonians are available at https://github.com/albertzhu01/TBG-from-first-principles.
  59. [59]L. Balents, C. R. Dean, D. K. Efetov, and A. F. Young, Superconductivity and strong correlations in moiré flat bands, Nat. Phys. 16, 725 (2020).DOI
  60. [60]R. Kim, W. Kim, K. D. Stubbs, S. G. Louie, and L. Lin, Ab initio quantum embedding description of magic-angle twisted bilayer graphene at even-integer fillings, Phys. Rev. B 114, 185131 (2026).arxiv.org/abs/2603.10433
  61. [61]M. M. Al Ezzi, A. Zhu, D. Bennett, D. T. Larson, and E. Kaxiras, Universal symmetries in twisted moiré materials, Phys. Rev. B 114, 125116 (2026).
  62. [62]P. H. Schönemann, On two-sided orthogonal Procrustes problems, Psychometrika 33, 19 (1968).pubmed.ncbi.nlm.nih.gov/5239567
  63. [63]K. Fan and A. J. Hoffman, Some metric inequalities in the space of matrices, Proc. Amer. Math. Soc. 6, 111 (1955).
  64. [64]P. H. Schönemann, A generalized solution of the orthogonal Procrustes problem, Psychometrika 31, 1 (1966).DOI
  65. [65]D. Gresch, Q. Wu, G. W. Winkler, R. Häuselmann, M. Troyer, and A. A. Soluyanov, Automated construction of symmetrized Wannier-like tight-binding models from ab initio calculations, Phys. Rev. Materials 2, 103805 (2018).
  66. [66]R. A. Horn and C. R. Johnson, Matrix Analysis, 2nd ed. (Cambridge University Press, Cambridge, 2013).
  67. [67]K. D. Ikramov, Takagi’s decomposition of a symmetric unitary matrix as a finite algorithm, Comput. Math. Math. Phys. 52, 1 (2012).DOI

Paper details

vlnc:W_h9u73eet
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Claude Code

View statement
Looking for related papers…
Contents