betaFeedback

WorksPhysics and Astronomy

Intrinsic Chiral HOTI Stabilized by a Single Diagonal Reflection

Abstract

Higher-order topological insulators and superconductors, under combined point and fundamental symmetries, display topological modes supported by boundaries of higher codimensions, such as a corner mode. In this work, we explain a theoretical device that enables us to claim that there exists one and only one intrinsic chiral-symmetric higher-order topological phase for the quarter-plane geometry with point-symmetry given by reflection about the diagonal of the corner. Furthermore, we supply a minimal tight-binding model of this phase and design an acoustic crystal whose dynamics reproduce that of the model. The robust properties of the corner mode are investigated by COMSOL simulations.

Introduction

In their seminal works, Benalcazar, Bernevig, and Hughes [1, 2] discovered a new class of crystalline topological phases exhibiting electronic dynamics confined not only along edges or surfaces, but also on “boundaries of boundaries,” such as hinges and corners. In particular, they demonstrated that certain point-groups can stabilize quantized bulk multipole moments, inducing topologically protected modes localized at intersections of boundaries. Their predictions were confirmed shortly afterward using laboratory models based on microwave circuits [3] and pononic crystals [4]. These ideas were subsequently expanded by Schindler et al. in [5], giving rise to the notion of higher-order topological insulators (HOTIs). Under space terminations that preserve a subgroup of the crystal’s space-group symmetries, HOTIs exhibit topological modes localized on boundary features of co-dimension n>1n > 1 relative to the bulk. For example, a flat boundary has co-dimension 1, a hinge has co-dimension 2 and a corner has co-dimension 3. Ever since, HOTI has been a very active research topic, explored theoretically and experimentally for a wide variety of crystalline symmetries with or without other fundamental symmetries [7], and even beyond the crystalline setting [8].

From a mathematical-physics point of view, HOTIs presented several outstanding challenges: (1) The bulk topology and the predicted boundary phenomena, strictly speaking, exist only in the thermodynamic limit, for otherwise the expected boundary modes couple through their evanescent tails and the spectra become gapped. In that infinite-size limit, how are we going to remember (aka encode) how the crystal was terminated?

(2) The notion of gappable edges or surfaces, needed to expose the topological modes supported by their higher co-dimensional defects, make good sense at the intuitive level. It infers that there are no topological obstructions against deforming a bulk model and the boundary conditions until the dynamics near a specific co-boundary becomes spectrally gapped. Can this notion be formulated within the established language of topology, which first and foremost calls for a clear identification of the relevant topological spaces where those deformations occur? (3) HOTI phenomena have an intrinsic character, i.e. they are protected by bulk’s topology and symmetries: Different compatible boundary conditions can shuffle, add or remove boundary modes but never fully destroy them. (For equally interesting extrinsic HOTIs, see [9].) Can this intrinsic character be formulated within the established language of topology?

Operator algebras, and in particular C*-algebras, have a long and fruitful history of interactions with condensed matter physics. In the following, we summarize a sequence of such interactions that led to affirmative answers for the three stated challenges. First and foremost, C*-algebras come equipped with natural topologies that can be used naturally to encode locality and continuity of the physical Hamiltonians under various deformations, supplying in the same time a framework to perform computations in real-space and directly in the thermodynamic limit [10, 11, 12, 13]. Their KK-theories are devices that sort gapped Hamiltonians in stable homotopy equivalence classes [14, 15]. Furthermore, the bulk-boundary correspondence principle for flat boundaries of class A insulators has found an elegant formulation in the operator algebraic setting. Indeed, it was shown in [16] that the half-space Hamiltonians, with all physically sound boundary conditions, form a C*-algebra. Inside this algebra, one can naturally identify an ideal containing all potentials responsible for various boundary conditions, which enters the exact sequence

boundary alg.↔half-space alg.→bulk alg.\text{boundary alg.} \leftrightarrow\text{half-space alg.} \to\text{bulk alg.}

In turn, this sets in motion standard exact sequences between corresponding KK-theories, creating precise bridges between the topologies of the bulk and of the boundary. In particular, one can identify all bulk models which generate topological boundary states when restricted to half space, regardless of the boundary condition. See [17] for an extension of these ideas to the full classification table of topological insulators and superconductors.

Besides flat boundaries, there are many other elementary geometric defects in condensed matter systems [18], which can support topological states too [19, 20]. While [19] developed a framework based on a mixed momentum-real spaces approach, the operator algebraic framework enables a clean real-space formulation [21, 22], which e.g. can incorporate disorder. As it was pointed out in [21], the key to a bulk-defect correspondence is the structure of the phason space ΞL\Xi_{\mathcal{L}} of a lattice L\mathcal{L} in the presence of an elementary geometric defect (see Sec. II B). In a nutshell, the phason space contains all the different images of the same lattice as seen by an observer located at different points in space, and it is this phason space that determines the C∗C^*-algebra of physical Hamiltonians (see Sec. II C). In the presence of an elementary geometric defect, the phason space decomposes as ΞL=ΞL∞∪ΞLc\Xi_{\mathcal{L}} = \Xi_{\mathcal{L}}^\infty\cup\Xi_{\mathcal{L}}^c, where ΞL∞\Xi_{\mathcal{L}}^\infty encodes the images of the lattice seen by an observer asymptotically far from the defect. By a standard mechanism for (groupoid) C∗C^*-algebras [23], this splitting prompts again an exact sequence sequence

defect alg.↪full alg.↠bulk alg.\text{defect alg.} \hookrightarrow\text{full alg.} \twoheadrightarrow\text{bulk alg.}

which again trickles-down to the level of KK-theory, enabling one to identify all bulk models which generate topological defect states for a given geometry.

Higher-order boundaries, such as hinges and corners are not elementary geometric defects. Indeed, in the presence of such defects, the phason space has a rich structure, specifically, it accepts a unique maximal filtration

{Lbulk}=Ξ0⊂Ξ1⊂⋯⊂Ξd=ΞL\{\mathcal{L}_{\mathrm{bulk}}\} = \Xi_0 \subset\Xi_1 \subset\cdots\subset\Xi_d = \Xi_{\mathcal{L}}

by closed and invariant subsets that are compatible with the point-symmetry of the crystal (see Sec. II E). Here, Ξr∖Ξr−1\Xi_r \setminus\Xi_{r-1} contains the images of the lattice as seen by an observer close to a defect of co-dimension rr and asymptotically far from all other defects. This sets in motion a long sequence of C∗C^*-algebras that can be naturally associated with the dynamics near defects with specified co-dimensions. In turn, this induces a spectral sequence at the level of KK-theories and, one …

The outcome of the operator theoretic framework is a device that can identify all non-trivial higher-order bulk-defect correspondences compatible with given symmetries and boundary geometry. The scope of this paper is to demonstrate how these operator theoretic devices developed in [24] can be used as engines for discovery in the HOTI program. At the same time, we aim to translate the formalism into a language familiar to the materials science community, using the simple case of a (intrinsic) HOTI stabilized by chiral symmetry and just one reflection (x1,x2)↦(x2,x1)(x_1,x_2) \mapsto(x_2,x_1) along the diagonal intersecting a corner. While we chose this setting for its simplicity, to authors’ knowledge, it was actually never explored before. For example, the original works [1, 2] consider two separate reflections and same in [6], [25] considers an additional time reversal symmetry, and the chiral HOTIs identified in [26, 27] are extrinsic (boundary-obstructed).

In the stated setting, we introduce and characterize the phason space in the presence of a corner, as well as the algebras capturing all physically sound Hamiltonians. Using the structure of the phason space and of the mentioned algebras, we formulate the notion of gappable bulk models at the edges, and define an intrinsic bulk-corner correspondence map. Lastly, we evaluate this map and show that the intrinsic chiral topological states for the corner geometry have a Z2\mathbb{Z}_2-classification hence, up to stable equivariant homotopies, there is one and only one elementary HOTI model for this combination of geometry and symmetry. We supply the minimal tight-binding model for it.

In the second part, we use coupled-mode theory for acoustic resonators to demonstrate the emergence of a topological corner mode in an acoustic crystal, which is built and characterized in COMSOL [28]. Almost as a rule, even the minimal tight-binding models of HOTIs are still challenging for laboratory implementations. As we shall see, our model requires four resonators per cell and eight connections per resonator, of which several connect second-nearest neighbors. The implementation relies on the so-called H-resonators [29], already proven advantageous when dealing with complex structures [30], but the couplings require several engineering innovations. Indeed, the complexity of the minimal model forces on us to work with acoustic bridges of different lengths, some exceeding the wavelength of sound at the probed frequencies. A controlled procedure to engineer such couplings, inspired from [27], is explained in Sec. IV.

HOTI by Operator Algebras

Our main task is to convince the reader that what we are presenting here is not a convenient mathematical framework, but that the operator algebras we are going to reveal accurately describe the dynamics of the truncated lattices without simplifying assumptions. We will be dealing with discrete collections of uniformly separated points of R2\mathbb{R}^2, which are closed subsets of R2\mathbb{R}^2 where the lattices live. The spaces of closed subsets of topological spaces, sometimes called hyperspaces, are well studied in mathematics [31] and prominently featured in image analysis [32]. Consideration of the topological space C(R2)C(\mathbb{R}^2) of closed subsets of R2\mathbb{R}^2 (endowed with Fell’s topology [33]) enables us to represent a lattice L\mathcal{L} as a single point of C(R2)C(\mathbb{R}^2), hence to give sense to statements like “continuous deformations of lattice” or “depends continuously on the lattice.” This is the point of departure for the operator theoretic approach.

Emergence of the phason space from dynamical considerations

We can describe electronic and acoustic crystals simultaneously if we view the acoustic cavities and their resonant modes as synthetic atoms with synthetic orbitals. For the start, let us consider a generic lattice L\mathcal{L}, which can have boundaries. The Hilbert space of the collective dynamics is spanned by ∣α,x⟩|\alpha,x\rangle representing the orbital α=1,…,N\alpha=1,\ldots,N carried by the atom x∈Lx\in\mathcal{L}, hence we are dealing with CN⊗ℓ2(L)\mathbb{C}^{N}\otimes\ell^{2}(\mathcal{L}). Like any bounded linear operator over this Hilbert space, the Hamiltonian generating the collective dynamics takes the tight-binding form

HL=∑x,x′∈Lwx,x′(L)⊗∣x⟩⟨x′∣.H_{\mathcal{L}}=\sum_{x,x'\in\mathcal{L}}w_{x,x'}(\mathcal{L})\otimes|x\rangle\langle x'|.

Here, ww’s are N×NN\times N coupling matrices acting on the α\alpha part of the mode ∣α,x⟩|\alpha,x\rangle, and, by writing wx,x′(L)w_{x,x'}(\mathcal{L}), we indicate that the entries of these matrices are fully determined by the lattice L\mathcal{L}. In other words, we have a well defined continuous map L↦HL\mathcal{L}\mapsto H_{\mathcal{L}} from lattices to Hamiltonians. Furthermore, as a direct consequence of Galilean invariance of the physical laws governing the mode-coupling, we have

wx−a,x′−a(L−a)=wx,x′(L)(1)w_{x-a,x'-a}(\mathcal{L}-a)=w_{x,x'}(\mathcal{L}) \tag*{(1)}

for all a∈Rda\in\mathbb{R}^{d} and x,x′∈Lx,x'\in\mathcal{L}. These relations say that a rigid motion of the lattice will go un-noticed by someone observing the dynamics from a frame tide to the lattice.

As a result, the dynamical matrices have a particular structure

HL=∑x,x′∈Lw0,x′−x(L−x)⊗∣x⟩⟨x′∣.(2)H_{\mathcal{L}}=\sum_{x,x'\in\mathcal{L}}w_{0,x'-x}(\mathcal{L}-x)\otimes|x\rangle\langle x'|. \tag*{(2)}

This form automatically encodes the Galilean invariance of the physical laws, which is a separate mater from the symmetries of the lattice itself. Now, note that ww’s in (2) are evaluated on the subset

{L−x,x∈L}⊂C(R2).(3)\{\mathcal{L}-x,x\in\mathcal{L}\}\subset\mathcal{C}(\mathbb{R}^{2}). \tag*{(3)}

The closure ΞL\Xi_{\mathcal{L}} of this subset in the topology of C(R2)\mathcal{C}(\mathbb{R}^{2}) coincides with the phason space in all cases studied by materials scientists, and in particular for quasi-crystals [35]. In the mathematics of patterns, ΞL\Xi_{\mathcal{L}} is called the transversal of L\mathcal{L} [15] because it is a genuine Poincaré section of the orbit {L−a,a∈R2}\{\mathcal{L}-a,a\in\mathbb{R}^{2}\} inside the pattern space C(R2)\mathcal{C}(\mathbb{R}^{2}).

The phason space in the presence of a higher-order boundary

We now consider L0\mathcal{L}_0 to be the quarter-plane lattice shown in Figure 1, as seen by an observer sitting right at its tip. Our task is resolve the topological type of the transversal ΞL0\Xi_{\mathcal{L}_0}, i.e. of the closure of the set (3) for this L0\mathcal{L}_0, which lives in the space of patterns C(R2)\mathcal{C}(\mathbb{R}^{2}). It will be a discrete set with accumulation points. Note that the operation L0−x\mathcal{L}_0-x brings resonator xx to the origin of R2\mathbb{R}^{2}, so we can understand L0−x\mathcal{L}_0-x as the lattice seen by an observer located at the point xx of the lattice. This small observation is very much the key for mapping the transversals of patterns.

An observer inspecting the lattice from different points

Figure 1. An observer inspecting the lattice from different points, with emphasis on the asymptotic regions.

Now, if the observer steps on the lattice in any direction while the corner is in its field of view, the observer will perceive a different lattice every time. In the space C(R2)\mathcal{C}(\mathbb{R}^2) of patterns, we put down these (shifted) lattices as the discrete black points seen in Figure 2. However, if the observer steps in a straight line to the right, the pattern of points will start to look more and more like in inset A of Figure 1. When the corner falls beyond the horizon, the observer reached a limit point, which we represent as a green dot in Figure 2. There are many green dots because the observer still sees the horizontal edge, hence, while stepping vertically away from the edge, the observer will still perceive different patterns of points. It should be obvious that the observer will become trapped in these limiting patterns, since it will be impossible to walk back and bring the corner in the field of view.

Mapping the phason space of $\mathcal{L}_0$

Figure 2. Mapping the phason space of L0\mathcal{L}_0.

A similar story will unfold if the observer walks vertically in a straight lines. In this case, the observer reaches the limiting patterns shown in inset B of Figure 1, which are represented by the orange dots in the space of patterns shown in Figure 2. However, if the observer steps diagonally on the lattice, the corner as well as the edges will fall beyond the horizon and the observer will perceive the pattern shown in the inset C of Figure 1. This is the bulk lattice Lb\mathcal{L}_b, which we represent as the red dot in the space of patterns. This limiting pattern can be also reached by walking away from the edges, so the transversal must look like as depicted in Figure 2.

The algebra of physical Hamiltonians

For a bulk system Lb−x=Lb\mathcal{L}_b-x=\mathcal{L}_b, hence the equivariance relation (1) forces the following structure on the physical Hamiltonians

HLb=∑x,x′∈Lbwx′−x∣x⟩⟨x′∣=∑q∈Lbwq⊗∑x∈Lb∣x⟩⟨x+q∣.H_{\mathcal{L}_b}=\sum_{x,x'\in\mathcal{L}_b}w_{x'-x}|x\rangle\langle x'|=\sum_{q\in\mathcal{L}_b}w_q\otimes\sum_{x\in\mathcal{L}_b}|x\rangle\langle x+q|.

The last sum is nothing but the shift operator Sq=S1q1S2q2S^q=S_1^{q_1}S_2^{q_2} on the lattice, hence

HLb=∑q∈Lbwq⊗Sq=∑q∈Lbwq⊗S1q1S2q2.(4)H_{\mathcal{L}_b}=\sum_{q\in\mathcal{L}_b}w_q\otimes S^q=\sum_{q\in\mathcal{L}_b}w_q\otimes S_1^{q_1}S_2^{q_2}. \tag*{(4)}

and on the right we see the standards elements of the group algebra CZ2\mathbb{C}\mathbb{Z}^2, as canonically represented on ℓ2(Lb)\ell^2(\mathcal{L}_b), tensored by M∞M_\infty. The latter is the algebra of infinite-rank matrices that can be approximated by finite rank matrices. Any finite-rank matrix can be naturally embedded in M∞M_\infty, and having them inside one space it enables us to turn on and off orbitals, e.g. during a material deformation, as we should because (2) are only low energy approximations of the exact Hamiltonians.

In the presence of a boundary, the Z2\mathbb{Z}^2-symmetry of the lattice is lost, but the systems still obey the equivariance relation (1). To take advantage of it, we must pass from groups to the more general notion of groupoids. Specifically, for a fixed aperiodic architecture L0\mathcal{L}_0, its groupoid GΞL0\mathcal{G}_{\Xi_{\mathcal{L}_0}} consists of triples

τ=(L−x,x,L),L∈ΞL0 & x∈L,(5)\tau=(\mathcal{L}-x,x,\mathcal{L}),\qquad\mathcal{L}\in\Xi_{\mathcal{L}_0}\ \&\ x\in\mathcal{L}, \tag*{(5)}

and two such triples (L′−x′,x′,L′)(\mathcal{L}'-x',x',\mathcal{L}') and (L−x,x,L)(\mathcal{L}-x,x,\mathcal{L}) are composable if and only if L′=L−x\mathcal{L}'=\mathcal{L}-x, in which case

(L′−x′,x′,L′)(L−x,x,L)=(L−x−x′,x+x′,L).(\mathcal{L}'-x',x',\mathcal{L}')(\mathcal{L}-x,x,\mathcal{L})=(\mathcal{L}-x-x',x+x',\mathcal{L}).

There is also a natural inversion,

(L−x,x,L)−1=(L−x,x,L−x).(\mathcal{L}-x,x,\mathcal{L})^{-1}=(\mathcal{L}-x,x,\mathcal{L}-x).

Furthermore, ΞL0\Xi_{\mathcal{L}_0} inherits a topology from the space ΞL0×R2×ΞL0\Xi_{\mathcal{L}_0}\times\mathbb{R}^2\times\Xi_{\mathcal{L}_0} where the triples live. One should be fully aware that the topology and the algebraic structure of the groupoid are equally important.

Remark 1. For orientation, if we replace L0\mathcal{L}_0 by the bulk lattice Lb\mathcal{L}_b, then Lb−x=Lb\mathcal{L}_b-x=\mathcal{L}_b and, as such, the phason space contains just one point, Lb\mathcal{L}_b itself, and the groupoid reduces to the group Lb≅Z2\mathcal{L}_b\cong\mathbb{Z}^2.

Note that each triple takes an L∈ΞL0\mathcal{L}\in\Xi_{\mathcal{L}_0} and sends it into L−x\mathcal{L}-x, which is also a point of ΞL0\Xi_{\mathcal{L}_0}. This is called the groupoid action on the phason space and will play an important role in the following. Indeed, we will be seeking closed subsets of ΞL0\Xi_{\mathcal{L}_0} that are invariant under this groupoid action.

Now, like groups, a groupoid accepts a natural algebra. Its elements are complex-valued function with compact support, defined over the groupoid itself. Thus, in our context, we are talking about functions mapping triples τ\tau to C\mathbb{C}, and we will denote this algebra as CGΞL0\mathbb{C}\mathcal{G}_{\Xi_{\mathcal{L}_0}}, as one will do for group algebras. Addition is just the ordinary addition for complex-valued functions, while the product is given by the convolution

(f⋅f′)(τ)=∑τ1τ2=τf(τ1)f′(τ2).(f\cdot f')(\tau)=\sum_{\tau_1\tau_2=\tau}f(\tau_1)f'(\tau_2).

One can verify that this product reduces to the one of the group algebra CZ2\mathbb{C}\mathbb{Z}^2 if we replace L0\mathcal{L}_0 with the bulk lattice.

The algebra itself is a linear space, so we can generate a canonical representation of CGΞL0\mathbb{C}\mathcal{G}_{\Xi_{\mathcal{L}_0}} by letting it act on itself from the left. This representation, called the left-regular representation, breaks down into a direct sum indexed by the phason space πL=⨁L∈ΞL0πL\pi_{\mathcal{L}}=\bigoplus_{\mathcal{L}\in\Xi_{\mathcal{L}_0}}\pi_{\mathcal{L}}, were the Hilbert space of πL\pi_{\mathcal{L}} is spanned by ∣x⟩|x\rangle with x∈Lx\in\mathcal{L} and

πL(f)=∑x,x′∈Lf(L−x+x′,x′−x,L)∣x⟩⟨x′∣.(6)\pi_{\mathcal{L}}(f)=\sum_{x,x'\in\mathcal{L}}f(\mathcal{L}-x+x',x'-x,\mathcal{L})|x\rangle\langle x'|. \tag*{(6)}

The punch line is that, after we take the tensor with M∞M_\infty and make the choice

f(L−x,x,L)=w0,x(L)f(\mathcal{L}-x,x,\mathcal{L})=w_{0,x}(\mathcal{L})

for all L∈ΞL0\mathcal{L}\in\Xi_{\mathcal{L}_0} and x∈Lx\in\mathcal{L}, expressions (2) and (6) coincide. Thus, M∞⊗CGΞL0M_\infty\otimes\mathbb{C}\mathcal{G}_{\Xi_{\mathcal{L}_0}} can produce with its standard family of representations all generators of the collective dynamics, as observed from any point of the lattice L0\mathcal{L}_0. In the same time, we can be sure that any self-adjoint element from this algebra produces a physically sound finite-range dynamics, because we insisted that the functions ff have compact supports.

As a last step, let us observe that, even for finite-range Hamiltonians, the Green functions and spectral projectors are not of finite-range type, hence not inside M∞⊗CGΞ0M_{\infty} \otimes\mathbb{C}\mathcal{G}_{\Xi_0}. To generate the minimal algebra that includes all of that, we close CGΞ0\mathbb{C}\mathcal{G}_{\Xi_0} inside the algebra of linear operators over the Hilbert space of the left-regular representation, finally leading us to the C∗\mathrm{C}^{*}-algebra M∞⊗C∗GΞ0M_{\infty} \otimes\mathrm{C}^{*}\mathcal{G}_{\Xi_0} of physical Hamiltonians.

Symmetries

We can quickly introduce the general framework for mixed space and fundamental symmetries and then particularize to the case of just one space symmetry, the reflection σr\sigma_r along the first diagonal (x1,x2)↦(x2,x1)(x_1,x_2) \mapsto(x_2,x_1), augmented by chiral symmetry. Henceforth, let Σ\Sigma be a finite group of isometry σ\sigma of R2\mathbb{R}^2 which leave Ξ0\Xi_0 invariant. Any such σ\sigma induces an automorphism of algebra C∗GL0\mathrm{C}^{*}\mathcal{G}_{L_0},

[ασ(f)](L−x,x,L)=f(σ⋅(L−x),σ⋅x,σ⋅L).[\alpha_{\sigma}(f)](\mathcal{L}-x,x,\mathcal{L})=f(\sigma\cdot(\mathcal{L}-x),\sigma\cdot x,\sigma\cdot\mathcal{L}).

The fundamental symmetries are generated by time-reversal TT and particle-hole exchange PP and, at the first step, they are accounted for by the larger group Σ‾=Z2×Z2×Σ\overline{\Sigma}=\mathbb{Z}_2\times\mathbb{Z}_2\times\Sigma. One lets this group act on C∗GL0\mathrm{C}^{*}\mathcal{G}_{L_0} by ignoring the augmented part. However, TT and PP are always represented by anti-unitary operators, hence the generators of the two Z2\mathbb{Z}_2 subgroups must act anti-linearly on the algebras of observables. This is effectively dealt with by passing to an extension of Σ‾\overline{\Sigma} by T\mathbb{T} [34]. Up to isomorphisms, such extensions are enumerated by group morphisms ϕ:Σ‾→Out⁡(T)≃Z2\phi:\overline{\Sigma}\to\operatorname{Out}(\mathbb{T})\simeq\mathbb{Z}_2 and by two-cocycles ξ∈H2(Σ‾,T)\xi\in H^2(\overline{\Sigma},\mathbb{T}). We denote a group extension with such data by Σ‾ξϕ\overline{\Sigma}^{\phi}_{\xi}. As a set, Σ‾ξϕ=T×Σ‾\overline{\Sigma}^{\phi}_{\xi}=\mathbb{T}\times\overline{\Sigma} with multiplication determined by ϕ\phi and τ\tau. The twist ϕ\phi fixes which group elements will act anti-linearly and the twisting cocycle ξ\xi specifies whether TT or PP square to 11 or −1-1. In addition, the elements of Σ‾\overline{\Sigma} are graded by a homomorphism c:Σ‾→Z2c:\overline{\Sigma}\to\mathbb{Z}_2, which assigns c(P)=1c(P)=1, c(T)=0c(T)=0 and c(σ)=0c(\sigma)=0 for all σ∈Σ\sigma\in\Sigma, to force the particle-hole exchange to be a graded symmetry that reverses the sign of a symmetric Hamiltonian.

The next task is to endow the algebra M∞⊗C∗GΞ0M_{\infty}\otimes\mathrm{C}^{*}\mathcal{G}_{\Xi_0} of physical Hamiltonians with a natural cc-graded action of this extension group. On C∗GΞ0\mathrm{C}^{*}\mathcal{G}_{\Xi_0}, Σ‾ξϕ\overline{\Sigma}^{\phi}_{\xi} acts as

(t,σ‾)⋅f={tασ‾(f)if ϕ(σ‾)=1,tασ‾(f)if ϕ(σ‾)=0.(t,\overline{\sigma})\cdot f= \begin{cases} t\alpha_{\overline{\sigma}}(f) & \text{if }\phi(\overline{\sigma})=1,\\ t\alpha_{\overline{\sigma}}(f) & \text{if }\phi(\overline{\sigma})=0. \end{cases}

As for M∞M_{\infty}, we recall that it can be endowed with a canonical action of any group GG with countable set of irreducible representations (irreps) that are all finite dimensional. Indeed, by considering the universal representation Hilbert space

HG=⨁irrepsVirrep⊗ℓ2(N),\mathcal{H}_G=\bigoplus_{\mathrm{irreps}}V_{\mathrm{irrep}}\otimes\ell^2(\mathbb{N}),

we can present M∞M_{\infty} as the algebra of compact operators over HG\mathcal{H}_G. The latter algebra accepts an action β\beta by GG which is canonically induced from the action of GG on HG\mathcal{H}_G. It is uniquely determined by the requirement π(g)(Kv)=βg(K)πg(v)\pi(g)(Kv)=\beta_g(K)\pi_g(v) for any g∈Gg\in G and v∈HGv\in\mathcal{H}_G. When this is present, we restrict the above sum to the cc-graded representations. Applying these elements to Fξϕ\mathcal{F}^{\phi}_{\xi}, we can and we do endow the algebra of physical Hamiltonians with the required action.

We now focus on the setting of this paper where Σ=⟨σr⟩\Sigma=\langle\sigma_r\rangle, and where time-reversal and particle-hole symmetries are broken, but chiral symmetry S=TPS=TP is not. Thus, we have the symmetry group Γ=⟨S,σr⟩⊂Σ‾\Gamma=\langle S,\sigma_r\rangle\subset\overline{\Sigma}. As a combination of two anti-unitary transformations, SS is unitary, hence the data (ϕ,τ)(\phi,\tau) is trivial, but the grading c(S)=1c(S)=1 is odd. All cc-graded representations of Γ\Gamma are of the form M2⊗L(V)M_2\otimes L(V), where SS is implemented by conjugation with the diagonal (1,−1)⊗I(1,-1)\otimes I, and VV is a representation space for Σ\Sigma. As such, the symmetric Hamiltonians are encoded by self-adjoint elements

\begin{pmatrix} 0 & W^{*}\\ W & 0 \end{pmatrix},\qquad W\in M_{\infty}\otimes\mathrm{C}^{*}\mathcal{G}_{\Xi_0} \tag*{(7)}\end{pmatrix}

where M∞M_{\infty}, hence M∞⊗C∗GΞ0M_{\infty}\otimes\mathrm{C}^{*}\mathcal{G}_{\Xi_0} too, are endowed with the canonical action by Σ\Sigma. Then WW must be fixed by this action to have a fully symmetric Hamiltonian.

We now inspect the action of Σ\Sigma on the transversal Ξ0\Xi_0 displayed in Figure 2. It is simply given by reflection of the diagram w.r.t. the main diagonal. What is important is the existence of closed subsets invariant to the groupoid and Σ\Sigma actions. They are Ξ2=ΞL0\Xi_2=\Xi_{L_0}, i.e. the whole phason space, Ξ1\Xi_1, and Ξ0={Lb}\Xi_0=\{ \mathcal{L}_b\}, i.e. the bulk lattice, both shown in Figure 3. They generate a maximal filtration of the phason space

Maximal filtration of the phason space

Figure 3. Maximal filtration of the phason space.

{Lb}=Ξ0⊂Ξ1⊂Ξ2=ΞL0(8)\{\mathcal{L}_b\}=\Xi_0\subset\Xi_1\subset\Xi_2=\Xi_{L_0} \tag*{(8)}

by invariant closed subsets. As noted in [24] and emphasized in again in our introduction, such canonical structures of the phason space are key to the operator theory approach to HOTIs.

Defect algebras, gappable edges, and all that

Given a closed subset Ξ\Xi of the phason space ΞL0\Xi_{L_0}, invariant against the groupoid's action, we can make sense of the groupoid GΞ\mathcal{G}_{\Xi} by simply restricting the triples (5) to those with L∈Ξ\mathcal{L}\in\Xi. Thus, for each set Ξi\Xi_i in (8), we have the C∗\mathrm{C}^{*}-algebra C∗GΞi\mathrm{C}^{*}\mathcal{G}_{\Xi_i} and, since we insisted that each Ξi\Xi_i be Σ\Sigma-symmetric, these algebras come each with a canonical graded action of desired symmetries. Furthermore, they enter the relation

C∗GΞ2→p2C∗GΞ1→p1C∗GΞ0,(9)\mathrm{C}^{*}\mathcal{G}_{\Xi_2}\xrightarrow{p^2}\mathrm{C}^{*}\mathcal{G}_{\Xi_1}\xrightarrow{p^1}\mathrm{C}^{*}\mathcal{G}_{\Xi_0}, \tag*{(9)}

where the surjective maps pip^i are Σ\Sigma-equivariant and simply given by restrictions of functions defined over GΞi\mathcal{G}_{\Xi_i} to the smaller GΞi−1\mathcal{G}_{\Xi_{i-1}}. The above relation amplifies without problem when we take the tensor product with M2⊗M∞M_{2}\otimes M_{\infty} so, to simplify the next discussion, we momentarily leave this tensoring aside.

The kernel of C∗GΞi↠C∗GΞi−1C^{*}\mathcal{G}_{\Xi_i}\twoheadrightarrow C^{*}\mathcal{G}_{\Xi_{i-1}} is simply C∗GΞi∖Ξi−1C^{*}\mathcal{G}_{\Xi_i\setminus\Xi_{i-1}} and, by examining which L\mathcal{L}’s are contained in Ξi∖Ξi−1\Xi_i\setminus\Xi_{i-1} in Figure 3, we see that Ξ2∖Ξ1\Xi_2\setminus\Xi_1 contains the black dots, while Ξ1∖Ξ0\Xi_1\setminus\Xi_0 contains the green and orange dots, excluding the accumulation red point. In other words, if L∈Ξ2∖Ξ1\mathcal{L}\in\Xi_2\setminus\Xi_1, then the observer is examining the dynamics with the corner inside of its field of view. We want to explain how algebra C∗GΞ2∖Ξ1C^{*}\mathcal{G}_{\Xi_2\setminus\Xi_1} generates operators that are confined near the corner. To start, we restrict the discussion to the dense subalgebra CGΞ2∖Ξ1C\mathcal{G}_{\Xi_2\setminus\Xi_1}, which contains the functions with compact support. Now, Ξ2∖Ξ1\Xi_2\setminus\Xi_1 is a discrete set, so its compact subsets are actually finite subsets. Similarly, any L\mathcal{L} is a discrete subset so again its compact subsets are finite subsets. As a result, a function over Ξ2∖Ξ1\Xi_2\setminus\Xi_1 with compact support will have non-zero values only for a finite number of triples engaging a finite number of black dots in Figure 3. Lastly, by examining the expression of the representations (6), we see that, indeed, all matrix elements there are confined in a finite region which has the corner in its field of view. The passage to the C∗C^{*} algebra relaxes this condition but still imposes a localization of the operators. Indeed, the operators from the C∗C^{*}-algebra can all be approximated by operator from CGΞ2∖Ξ1C\mathcal{G}_{\Xi_2\setminus\Xi_1}, which assures us that their matrix elements fade away as we move away from the corner. In conclusion, we can call C∗GΞ2∖Ξ1C^{*}\mathcal{G}_{\Xi_2\setminus\Xi_1} the corner algebra.

Similarly, if L∈Ξ1∖Ξ0\mathcal{L}\in\Xi_1\setminus\Xi_0, then the observer is examining the dynamics with one of the edges in its field of view but the corner is beyond the horizon. By the same mechanism explained above, the algebra C∗GΞ1∖Ξ0C^{*}\mathcal{G}_{\Xi_1\setminus\Xi_0} produces operators with matrix elements localized around the edges, hence it should be called the edge algebra.

Now, let h∈M2⊗M∞⊗C∗GΞ0h\in M_2\otimes M_{\infty}\otimes C^{*}\mathcal{G}_{\Xi_0} be a self-adjoint element encoding a dynamics of the system. As we already emphasized, this dynamics can be observed from many points in space and what will be reported from there is fully encoded in the representation πL(h)\pi_{\mathcal{L}}(h) (see (6)), where L∈Ξ0\mathcal{L}\in\Xi_0 is the lattice seen by the observer. As a result,

we can translate the intuitive notions of gapped and gappable dynamics at the edges into very precise statements:

Definition 2. The dynamics is said to be

  • Gapped in the bulk if πLb(h)\pi_{\mathcal{L}_b}(h) is a gapped operator.

  • Gapped at the edges if the operator πL(h)\pi_{\mathcal{L}}(h) is gapped for all L∈Ξ1∖Ξ0\mathcal{L}\in\Xi_1\setminus\Xi_0.

  • Gappable at the edges while gapped in the bulk if hh admits an equivariant homotopy inside M2⊗M∞⊗C∗GΞ0M_2\otimes M_{\infty}\otimes C^{*}\mathcal{G}_{\Xi_0} that stays gapped in the bulk and the end result is gapped at the edges.

Note that this definition makes statements about a dynamics in the presence of a corner, but how can we declare a bulk Hamiltonian as being gapped or gappable at the edges? Here is one of many places where the maps in (9) will come handy. Note that the map id⁡⊗p2\operatorname{id}\otimes p^2 associates to any hh from M2⊗M∞⊗C∗GΞ0M_2\otimes M_{\infty}\otimes C^{*}\mathcal{G}_{\Xi_0} a unique bulk-edge Hamiltonian hbe=(id⁡⊗p2)(h)∈M2⊗M∞⊗C∗GΞ1h_{be}=(\operatorname{id}\otimes p^2)(h)\in M_2\otimes M_{\infty}\otimes C^{*}\mathcal{G}_{\Xi_1}, and this bulk-edge Hamiltonian is further mapped by id⁡⊗p1\operatorname{id}\otimes p^1 to a unique bulk Hamiltonian hb=(id⁡⊗p1)(hbe)∈M2⊗M∞⊗C∗GΞ0h_b=(\operatorname{id}\otimes p^1)(h_{be})\in M_2\otimes M_{\infty}\otimes C^{*}\mathcal{G}_{\Xi_0}. Because the maps pip^i are surjective, any bulk Hamiltonian can be produced by either projecting all the way from M2⊗M∞⊗C∗GΞ0M_2 \otimes M_\infty\otimes C^*\mathcal{G}_{\Xi_0} or from M2⊗M∞⊗C∗GΞ1M_2 \otimes M_\infty\otimes C^*\mathcal{G}_{\Xi_1}. Since (id⁡⊗πL)(h)(\operatorname{id} \otimes\pi_L)(h) being gapped for all L∈Ξ1L \in\Xi_1 is equivalent to (id⁡⊗p1)(h)(\operatorname{id}\otimes p^1)(h) being gapped as an element of the algebra M2⊗M∞⊗C∗GΞ1M_2 \otimes M_\infty\otimes C^*\mathcal{G}_{\Xi_1}, the following definition of gappable bulk Hamiltonian writes by itself:

Definition 3. A gapped bulk Hamiltonian hb∈M2⊗M∞⊗C∗GΞ0h_b \in M_2 \otimes M_\infty\otimes C^*\mathcal{G}_{\Xi_0} is gappable at the edges if we can find a gapped equivariant homotopy hb(s)h_b(s) inside M2⊗M∞⊗C∗GΞ0M_2 \otimes M_\infty\otimes C^*\mathcal{G}_{\Xi_0} such that hb(1)h_b(1) has a pre-image in M2⊗M∞⊗C∗GΞ1M_2 \otimes M_\infty\otimes C^*\mathcal{G}_{\Xi_1}, under id⁡⊗p1\operatorname{id} \otimes p^1 which is gapped.

Since the difference between two such pre-images belongs to the kernel of id⁡⊗p1\operatorname{id} \otimes p^1, hence to the edge algebra M2⊗M∞⊗C∗GΞ1∖Ξ0M_2 \otimes M_\infty\otimes C^*\mathcal{G}_{\Xi_1\setminus\Xi_0}, the above statement effectively says that we can adiabatically and equivariantly deform hbh_b until we are presented with the opportunity of adding an edge potential that gaps the dynamics at the edges.

The intrinsic bulk-corner correspondence

We will engage Σ\Sigma-equivariant KK-theories of the C∗C^* algebras we already introduced. Given a generic C∗C^*-algebra A\mathcal{A} equipped with a Σ\Sigma-action, the K0ΣK^\Sigma_0 and K1ΣK^\Sigma_1 theories that we need can be presented in two equivalent ways, which both are useful in the present context (see [36] for a detailed account). In one description, an entry of K0Σ(A)K^\Sigma_0(\mathcal{A}) is a set containing all gapped self-adjoint Σ\Sigma-symmetric elements from M∞⊗AM_\infty\otimes\mathcal{A} that can be connected by gapped homotopies, while an entry of K1Σ(A)K^\Sigma_1(\mathcal{A}) is a set containing all gapped self-adjoint Σ\Sigma-symmetric odd-graded elements from M2⊗M∞⊗AM_2\otimes M_\infty\otimes\mathcal{A} that can be connected by gapped homotopies. Thus any gapped Σ\Sigma and chiral symmetric Hamiltonian hh defines a K1ΣK^\Sigma_1-class [h]1[h]_1 and, when topological class of a Σ\Sigma and chiral symmetric Hamiltonian is mentioned in a discussion, the reference is really about its K1ΣK^\Sigma_1-class.

It should be noted that, in equivariant KK-theory, the algebra is automatically stabilized by tensoring with M∞M_\infty or M2⊗M∞M_2 \otimes M_\infty, which are both endowed with the canonical group action. This allows for a natural addition operation of classes by stacking: If hh and h′h' are gapped Hamiltonians from M2⊗MN⊗AM_2 \otimes M_N \otimes\mathcal{A} and M2⊗MN′⊗AM_2 \otimes M_{N'} \otimes\mathcal{A}, respectively, then [h]1⊕[h′]1=[h⊕h′]1[h]_1 \oplus[h']_1 = [h \oplus h']_1, where h⊕h′h \oplus h' seen as an element of M2⊗MN+N′⊗AM_2 \otimes M_{N+N'} \otimes\mathcal{A}. Furthermore, it should become clear that HOTI phenomena that are stable against switching on and off orbitals emerge entirely from the groupoid algebras. The orbital spaces’ only role is to accommodate the generators of the KK-theories.

We want to show now how KK-theory answers challenge (2) stated in our introduction. For this, let us recall the simple fact that if p:A→B\mathfrak{p} : \mathcal{A} \to\mathcal{B} is a unital morphism of C∗C^*-algebras, then gapped self-adjoint elements are mapped into gapped self-adjoint elements. As such, we have a well defined maps pi\mathfrak{p}_i at the level of KK-theories, [h]i↦[pi(h)]i[h]_i \mapsto[\mathfrak{p}_i(h)]_i, i=0,1i = 0,1. Definition 3 can then be reformulated as follows:

Definition 4. A symmetric bulk Hamiltonian hbh_b is gappable at the edges if [hb]1∈K1Σ(C∗GΞ0)[h_b]_1 \in K^\Sigma_1(C^*\mathcal{G}_{\Xi_0}) accepts a pre-image under the map p11:K1Σ(C∗GΞ1)→K1Σ(C∗GΞ0)p^1_1 : K^\Sigma_1(C^*\mathcal{G}_{\Xi_1}) \to K^\Sigma_1(C^*\mathcal{G}_{\Xi_0}).

We are now in the position to identify all symmetric Hamiltonians gappable at the edges. Indeed, according to this definition, which embodies the intuitive picture and nothing else, all symmetric bulk Hamiltonians gappable at the edges are contained in the KK-theoretic classes found inside the image Im⁡p11⊂K1Σ(C∗GΞ0)\operatorname{Im} p^1_1 \subset K^\Sigma_1(C^*\mathcal{G}_{\Xi_0}).

In the second picture of KK-theories, the entries of K0ΣK^\Sigma_0 are classes of stably homotopic Σ\Sigma-symmetric projections, while the entries of K1ΣK^\Sigma_1-group are classes of stably homotopic symmetric unitaries. This picture is useful because, in order to identify the topological defect modes, we are not looking for a Hamiltonian but rather for either projections or unitaries that encode or expose them. KK-theory offers a machinery to do just that, which we now explain for the present context.

Consider a surjective equivariant homomorphism p:A→B\mathfrak{p} : \mathcal{A} \to\mathcal{B}. Then there exist canonical maps in KK-theories

∂i:KiΣ(B)→Ki+1Σ(Ker⁡p),i=0,1,(10)\partial_i : K^\Sigma_i(\mathcal{B}) \to K^\Sigma_{i+1}(\operatorname{Ker}\mathfrak{p}), \quad i = 0,1, \tag*{(10)}

called boundary maps. If a gapped Hamiltonian from the stabilization of B\mathcal{B} lands in a non-trivial KK-theoretic class of Ker⁡p⊂A\operatorname{Ker}\mathfrak{p} \subset\mathcal{A} under this map, we can be sure that it does not have a gapped pre-image in the stabilization of A\mathcal{A}. Otherwise, we can be sure that it does. Now, if p\mathfrak{p} is p2\mathfrak{p}^2 in (9), its boundary map ∂12\partial^2_1 enables us to identify all gapped Σ\Sigma and chiral symmetric elements from M2⊗M∞⊗C∗GΞ1M_2 \otimes M_\infty\otimes C^*\mathcal{G}_{\Xi_1} that become gapped when lifted to M2⊗M∞⊗C∗GΞ0M_2 \otimes M_\infty\otimes C^*\mathcal{G}_{\Xi_0}, i.e. to the full quarter-plane geometry. Now, Definition 3 assures us that any symmetric bulk Hamiltonian gappable at the edges has at least one gapped symmetric pre-image in M2⊗M∞⊗C∗GΞ1M_2 \otimes M_\infty\otimes C^*\mathcal{G}_{\Xi_1}, and these pre-images will produce corner modes when extended to quarter-plane geometry, provided they are mapped by ∂12\partial^2_1 into a nontrivial K0ΣK^\Sigma_0-theoretic class of the corner algebra C∗GΞ2∖Ξ1C^*\mathcal{G}_{\Xi_2\setminus\Xi_1}. In such cases, those classes correspond to the difference of Σ\Sigma-symmetric finite-rank projections [P0+]0−[P0−]0[P^+_0]_0 - [P^-_0]_0, where P0=P0++P0−P_0 = P^+_0 + P^-_0 is the projection onto the 0-energy corner modes, as resolved by the chiral sectors (see Prop. 4.3.3 in [37] and comments in [24]).

As a last step, we need to address what happens when we impose different boundary conditions at the edges. This is related to the fact that there can be many pre-images of [hb]1[h_b]_1, differentiated by the many symmetry-compliant boundary conditions we can impose. These pre-images can be pushed by ∂12\partial^2_1 into different corner projections displaying different corner modes, but they should be counted as being the same under intrinsic HOTI paradigm. To do so, we note that the difference between two pre-images is always inside Ker⁡p11∈K1Σ(C∗GΞ1∖Ξ0)\operatorname{Ker}p^1_1 \in K^\Sigma_1(C^*\mathcal{G}_{\Xi_1\setminus\Xi_0}) and, if we want to list the topological corner modes up to shuffling under different allowed boundary conditions, we need to quotient out ∂12(Ker⁡p11)\partial^2_1(\operatorname{Ker}p^1_1) from the range of ∂12\partial^2_1. This removes the ambiguities related to the pre-images, hence with the boundary conditions, and we obtain a well defined bulk-corner correspondence map give by the sequence,

bulk-model→pre-image→Im⁡∂12→Im⁡∂12∂12(Ker⁡p∗1),\text{bulk-model}\to\text{pre-image}\to\operatorname{Im}\partial_{1}^{2}\to\frac{\operatorname{Im}\partial_{1}^{2}}{\partial_{1}^{2}(\operatorname{Ker}p_{*}^{1})},

which answers challenge (3) stated in our introduction:

Proposition 5 ([24]). There is a map

δBC ⁣:Ker⁡p11→Im⁡∂12∂12(Ker⁡p∗1)(11)\delta_{BC}\colon\operatorname{Ker}p_{1}^{1}\to\frac{\operatorname{Im}\partial_{1}^{2}}{\partial_{1}^{2}(\operatorname{Ker}p_{*}^{1})} \tag*{(11)}

whose image identifies all intrinsic topological corner modes generated by symmetric gappable models. Furthermore, a symmetric bulk model is an intrinsic HOTI if and only if its K1ΣK_{1}^{\Sigma}-class belongs to the domain of δBC\delta_{BC} but is outside of Ker⁡δBC\operatorname{Ker}\delta_{BC}.

This can be formulated in a far more streamlined language, which we reproduce here from [24] for the experts, without explaining it (see [24] for details). The cofiltration (9) gives rise to a spectral sequence (Ep,qr,dp,qr)(E_{p,q}^{r},d_{p,q}^{r}) converging to the equivariant KK-theories of C∗GΞ0C^{*}\mathcal{G}_{\Xi_{0}}. Then the bulk–corner correspondence map, defined above, coincides with d0,12d_{0,1}^{2}, which has exactly the same domain and target space as in (11). Thus, despite its highly specialized form, the bulk-corner correspondence map can be identified with standard objects in topology. This picture accepts an extremely broad generalization (see Thm. 1.4 and examples in [24]).

Identifying the HOTIs

For the corner algebra, we have

K0Σ(C∗GΞ2\Ξ1)=Z[χ+⊗E0]0⊕Z[χ−⊗E0]0,K_{0}^{\Sigma}(C^{*}\mathcal{G}_{\Xi_{2}\backslash\Xi_{1}})=\mathbb{Z}[\chi_{+}\otimes E_{0}]_{0}\oplus\mathbb{Z}[\chi_{-}\otimes E_{0}]_{0},

where E0=∣0⟩⟨0∣E_{0}=|0\rangle\langle0| is the rank-one projection onto the corner site, and χ+\chi_{+} denote the central projections supporting the trivial and non-trivial irreducible representations of Σ≃Z2\Sigma\simeq\mathbb{Z}_{2} on C2\mathbb{C}^{2}. Furthermore, for the bulk algebra,

K1Σ(C∗GΞ0)=Z[U]1⊕Z[W]1,K_{1}^{\Sigma}(C^{*}\mathcal{G}_{\Xi_{0}})=\mathbb{Z}[U]_{1}\oplus\mathbb{Z}[W]_{1},

where the unitaries are

U=χ+⊗S1S2+χ−⊗1U=\chi_{+}\otimes S_{1}S_{2}+\chi_{-}\otimes\mathbf{1}

and

W=12(−S1∗−S2∗S1∗−S2∗S1−S2S1+S2)(12)W=\frac{1}{2}\begin{pmatrix} -S_{1}^{*}-S_{2}^{*} & S_{1}^{*}-S_{2}^{*}\\ S_{1}-S_{2} & S_{1}+S_{2} \end{pmatrix} \tag*{(12)}

with the latter written as an element of M2(C)⊗C∗Z2M_{2}(\mathbb{C})\otimes C^{*}\mathbb{Z}^{2} with the mirror action on the orbitals given by M=(100−1)M=\begin{pmatrix}1&0\\0&-1\end{pmatrix}, such that (Ad⁡M⊗σr)(W)=W(\operatorname{Ad}_{M}\otimes\sigma_{r})(W)=W. To get a geometric description of the generators, observe first that C∗GΞ0≃C∗Z2≃C(T2)C^{*}\mathcal{G}_{\Xi_{0}}\simeq C^{*}\mathbb{Z}^{2}\simeq C(\mathbb{T}^{2}). Viewing T2\mathbb{T}^{2} as the square with opposite edges identified, the unitary UU has winding number 1 along each pair of opposite edges and WW becomes diagonal matrix when restricted to the diagonal of the square; in that restriction, its components have winding numbers 1 and −1-1 in the eigenspaces of χ+\chi_{+} and χ−\chi_{-}, respectively. From this observation, it follows that Im⁡p11=Z[W]1\operatorname{Im} p_1^1 = \mathbb{Z}[W]_1, thus the gappable models are all stacks of an elementary Hamiltonian obtained by inserting WW into (7).

Now, a computation shows that

∂12(Im⁡p11)=Z[χ+⊗E0]0,\partial_1^2(\operatorname{Im} p_1^1) = \mathbb{Z}[\chi_+ \otimes E_0]_0,

while

∂12(Ker⁡p11)=2Z[χ+⊗E0]0,\partial_1^2(\operatorname{Ker} p_1^1) = 2\mathbb{Z}[\chi_+ \otimes E_0]_0,

from where we conclude that,

Im⁡δBC=Z2[χ+⊗E0]0.\operatorname{Im}\delta_{BC} = \mathbb{Z}_2[\chi_+ \otimes E_0]_0.

One can summarize all this information as:

Theorem 6. The symmetric bulk Hamiltonian HH derived from WW exhibits non-trivial corner modes whose parity is protected by the bulk topology and the symmetry Σ\Sigma. Moreover, any other symmetric Hamiltonian with same characteristics is stably homotopic with odd number of stakings of HH.

Mirror winding number

We present a practical method to decide if a symmetric bulk model gappable at the edges is a HOTI. We will work in the momentum space and identify the bulk algebra with C(T2)C(\mathbb{T}^2), where T2\mathbb{T}^2 is regarded as the square [0,1]2[0,1]^2 with opposite edges identified. Denote by DD the diagonal of T2\mathbb{T}^2, which is a closed Σ\Sigma-invariant subset of T2\mathbb{T}^2. Then the restriction map ∂:C(T2)→C(D)\partial: C(\mathbb{T}^2) \to C(D) defines a surjective Σ\Sigma-equivariant ∗*-homomorphism. Consequently, ∂\partial induces maps in the equivariant KK-theory ∂i:KiΣ(C(T2))→KiΣ(C(D))\partial_i: K_i^\Sigma(C(\mathbb{T}^2)) \to K_i^\Sigma(C(D)). One can easily check K0Σ(C(D))≃Z2≃K1Σ(C(D))K_0^\Sigma(C(D)) \simeq\mathbb{Z}^2 \simeq K_1^\Sigma(C(D)) by noticing that D≃S1D \simeq S^1 and Σ\Sigma acts trivially on DD. The generators of K1Σ(C(D))K_1^\Sigma(C(D)) can be identified with u=χ+⊗uD+χ−⊗1Du = \chi_+ \otimes u_D + \chi_- \otimes1_D and w=χ+⊗1D+χ−⊗uDw = \chi_+ \otimes1_D + \chi_- \otimes u_D, where uD:D→S1u_D : D \to S^1 is any function with winding number 1. Therefore, ∂1([U]1)=2[u]1\partial_1([U]_1) = 2[u]_1 and ∂1([W]1)=[u∗w]1\partial_1([W]_1) = [u^*w]_1.

Let now hb∈M2⊗MN(C)⊗C(T2)h_b \in M_2 \otimes M_N(\mathbb{C}) \otimes C(\mathbb{T}^2) be a gapped Hamiltonian that is Σ\Sigma and chiral symmetric, and let the unitary UhbU_{h_b} be the off-diagonal part of sign⁡(hb)\operatorname{sign}(h_b). Then ∂(Uhb)∈MN(C)⊗C(D)\partial(U_{h_b}) \in M_N(\mathbb{C}) \otimes C(D) is also a unitary so one may define ν±(∂(Uhb))\nu_\pm(\partial(U_{h_b})) as the winding number of ∂(Uhb)\partial(U_{h_b}) in the eigenspace of χ±\chi_\pm, respectively.

Definition 7. The mirror winding number of hbh_b is the integer number

ν(hb)=ν+(∂(Uhb))−ν−(∂(Uhb))2.(13)\nu(h_b) = \frac{\nu_+(\partial(U_{h_b})) - \nu_-(\partial(U_{h_b}))}{2}. \tag*{(13)}

Theorem 8. Let hb∈MN(C)⊗C(T2)h_b \in M_N(\mathbb{C}) \otimes C(\mathbb{T}^2) be a symmetric bulk Hamiltonian as above, which in addition is gappable at the edges. Then hbh_b is an intrinsic HOTI iff ν(hb)\nu(h_b) is odd.

Proof. In K1Σ(C(T2))K_1^\Sigma(C(\mathbb{T}^2)), the class of UhbU_{h_b} decomposes as

[Uhb]1=n1[U]1⊕n2[W]1.[U_{h_b}]_1 = n_1[U]_1 \oplus n_2[W]_1.
endsmid=1{ends_mid=1}

Since hbh_b is assumed gappable on the edges, n1=0n_1 = 0. Therefore ∂1([Uhb]1)=n2[u∗w]1\partial_1([U_{h_b}]_1) = n_2 [u^*w]_1 and one checks directly that the mirror winding number of the representative u∗wu^*w is 1. As such ν(hb)=n2\nu(h_b) = n_2. This tells us that hbh_b is stably equivalent with a stack of ν(hb)\nu(h_b) elementary HOTIs identified in the previous section. Then the statement follows from Thm. 6.

Implementation of HOTI with acoustics

We already identified a model representing the unique class of chiral HOTIs for the quarter-space geometry with mirror symmetry against the main diagonal. However, by construction, the model induced by the unitary WW from (12) has flat bands because the Hamiltonian squares to the identity. We prefer a model for which waves have dispersion and, therefore, we will present here a slightly modified HOTI model and its implementation with acoustics. All simulations were conducted via COMSOL Multiphysics’s acoustic module [28], where the boundaries were treated as hard walls and the speed of sound was fixed at 343 m/s.

The model

We will work with the two-dimensional model

H=2(0W+14I2W∗+14I20)H = 2\begin{pmatrix} 0 & W + \frac{1}{4}I_2 \\ W^* + \frac{1}{4}I_2 & 0 \end{pmatrix}

where WW is as in (12). One can check that W+sI2×2W + sI_{2\times2} is invertible for s∈[0,14]s \in[0,\frac{1}{4}] and obviously remains Σ\Sigma-symmetric, hence the seen modification preserves the topological class of the model. The factor in front is an energy rescaling and is irrelevant but practically convenient. The model is invariant to mirroring against the main diagonal, which switches S1↔S2S_1 \leftrightarrow S_2 and acts on the orbital by conjugation with I2⊗σzI_2 \otimes\sigma_z.

To reveal the coupling matrices, we write the Hamiltonian as in (4):

H=w(1,0)⊗S1+w(0,1)⊗S2+w(0,0)⊗1+h.c.,(14)H = w_{(1,0)} \otimes S_1 + w_{(0,1)} \otimes S_2 + w_{(0,0)} \otimes1 + \mathrm{h.c.}, \tag*{(14)}

where

w(0,0)=12(02I20202)w_{(0,0)} = \frac{1}{2}\begin{pmatrix} 0_2 & I_2 \\ 0_2 & 0_2 \end{pmatrix}

and

w(1,0)=(00000011−10001000),w(0,1)=(000000−11−1000−1000).w_{(1,0)} = \begin{pmatrix} 0 & 0 & 0 & 0 \\ 0 & 0 & 1 & 1 \\ -1 & 0 & 0 & 0 \\ 1 & 0 & 0 & 0 \end{pmatrix}, \qquad w_{(0,1)} = \begin{pmatrix} 0 & 0 & 0 & 0 \\ 0 & 0 & -1 & 1 \\ -1 & 0 & 0 & 0 \\ -1 & 0 & 0 & 0 \end{pmatrix}.

From these matrices, we can read the required couplings for the network of acoustic cavities and build the coupling diagram illustrated in Figure 5. Note that the second and third internal degrees of freedom are interchanged to obtain a more compact layout.

Coupling diagram of the acoustic system

Figure 5. Coupling diagram of the acoustic system as derived from (14), with the acoustic cavities shown as black disks. Since the model has four orbitals per atom, the acoustic system will consist of four 2-dimensional layers, each of which representing one orbital (see the orbital indices displayed in each panel). The left panel displays the mode-couplings at the same site. The middle (right) panel displays the mode-couplings between neighboring sites in the x1x_{1} (x2x_{2}) directions. Green bonds indicate couplings of strength 1/21/2. Orange bonds represent negative while indigo bonds indicate positive couplings of strength 1.

We report the spectrum of the Hamiltonian (14) in Figure 4, as computed on a finite 5×55 \times5 lattice with open (Dirichlet) boundary conditions (hence similar to our COMSOL model). There are four zero modes and their corresponding eigenvectors are displayed in the same figure. These are hybridizations of four corner modes, whose mix-up is unavoidable on a finite lattice. The minimal model with open boundary conditions has an accidental additional symmetry and only two of the four zero modes are robust under boundary conditions that respect the mirror symmetry against the first diagonal.

Spectrum and renderings of the zero modes of the tight-binding Hamiltonian

Figure 4. Spectrum and renderings of the zero modes of the tight-binding Hamiltonian (14), as computed on a 5×55\times5 lattice with open boundary conditions. The vertical degrees of freedom represent the four orbital indices. The site-amplitudes of the modes are encoded in the sizes of the spheres, while colors encode their signs, with red for negative and teal for positive.

Methods and Design

The coupling diagram seen in Figure 5 can be considered highly complex when compared with the typical acoustic crystals reported in the literature. Indeed, it requires as many as eight couplings per resonator, both positive and negative, and there are second-nearest neighbor couplings. To account for the large number of sign-varying couplings per resonator, we rely on the H-resonator [29], which was introduced precisely for this purpose [30]. Here we use a double-bridged configuration, shown in Figure 6, operated in its chamber-antisymmetric mode at f0=4.85f_0 = 4.85 kHz, which will serve as the orbital of the synthetic atom. In this mode the pressure is nearly uniform inside each chamber and opposite in the two chambers, so a bridge attached to one chamber or to the other couples with opposite sign. The next mode of the same resonator (8.45 kHz) does not offer this freedom, because there the two chambers oscillate in phase. The resonator couplings will be implemented by acoustic bridges, as illustrated in Figure 6(b) for a dimer.

The H-resonators and their coupling

Figure 6. The H-resonators and their coupling. a) Acoustic pressure profile of the chamber-antisymmetric mode of a single resonator at f0=4.85f_{0}=4.85 kHz, which serves as the base mode prior to coupling. The two chambers oscillate in antiphase with nearly uniform pressure, so the sign of a coupling is set by the chamber on which a bridge lands. b) COMSOL geometry of two coupled resonators, with the coupling length (CL) and the coupling width (CW) labeled. c) Relevant dimensions of the double-bridged H-resonator: H1=20H_{1}=20 mm, W1=10W_{1}=10 mm (each of the two large rectangular prisms is H1×W1×W1H_{1}\times W_{1}\times W_{1}), W2=3W_{2}=3 mm, H2=5H_{2}=5 mm (each bridge is an H2×H2×W2H_{2}\times H_{2}\times W_{2} rectangular prism centered on W1W_{1}), D1=6D_{1}=6 mm.

The key to a model implementation, in general, is a reproducible map from bridge’s geometry to tight-binding parameters. This is typically done via the so-called hybridization diagram, where the resonant frequencies of a dimer (and sometime trimer) are observed as function of one or more geometric parameters. In our case, it will be the cross-section of the acoustic bridges.

Of course, if this cross-section is zero, there is no connection and we will observe two modes at exactly the frequency f0f_0 of the individual H-resonators. As the cross-section is increased, mode hybridization takes place and the frequencies split and drift. The frequencies and mode hybridizations are well characterized by a tight-binding model

f1∣1⟩⟨1∣+f2∣2⟩⟨2∣+Δf(∣1⟩⟨2∣+∣2⟩⟨1∣),f_1|1\rangle\langle1| + f_2|2\rangle\langle2| + \Delta f(|1\rangle\langle2| + |2\rangle\langle1|),

where ∣i⟩|i\rangle represent the already mentioned modes carried by the H-resonators of the dimer. We need to implement pure hopping terms, hence no on-site potentials, otherwise is almost impossible to enforce the chiral symmetry. For this, we must force f1f_1 and f2f_2 to stay at the f0f_0 value. Note that, in such cases, Δf\Delta f is genuinely equal to half of the frequency splitting observed in the hybridization diagrams.

Being able to eliminate on-site terms and control Δf\Delta f by varying the geometry of the bridges is our primary challenge, which is intensified by the complexity of the model. Indeed, as it can be already seen in the coupling diagram from Figure 5, we are forced to work with bridges of three different lengths, and the one accommodating the second-near neighbor coupling will inherently exceed the wavelength of sound waves. This introduces a known challenge in meta-materials science, because the bridges themselves can support resonant modes that can strongly affect our control over the mode-couplings. Key to overcoming this challenge, is the observation that the resonances supported by the bridges move in frequency as their lengths are varied. As observed in [27], there are certain windows of lengths, which occur more or less periodically, where the bridge resonances stay away from the base frequency f0f_0 of the H-resonators and, as such, the coupling strengths induced by the bridges become predictable.

In Figure 7, we report the COMSOL simulated resonant frequencies of a dimer as function of bridge length, for a fixed bridge width of 2.3 mm. As one can see, there are wild swings in frequencies, except for well defined windows where the resonant frequencies occur close to f0f_0. It is in those windows where the mode-hybridization picture is valid. These windows occur at odd multiples of a quarter wavelength, CL≈(2m+1)λ/4CL \approx(2m+1)\lambda/4 with λ=c/f0=70.7\lambda= c/f_0 = 70.7 mm, where a bridge does not shift the frequencies of the resonators it connects, and consecutive windows give couplings of opposite sign. The sign of every coupling is therefore fixed by two geometric choices: the chambers on which the bridge lands and the window of its length. Using this data, we identified the bridge lengths CL1≈18CL_1 \approx18 mm, CL2≈53CL_2 \approx53 mm and CL3≈88CL_3 \approx88 mm. In the lattice, where the bridges must bend around the resonators, their lengths are 16.5 mm (on-site couplings), 54–55 mm and 89–91 mm.

Dimer’s resonant spectrum as a function of bridge length

Figure 7. Dimer’s resonant spectrum as a function of bridge length, for a bridge width of 2.3 mm. Boxes mark the windows where the two resonator modes sit symmetrically about f0f_0, so that the bridge implements a pure hopping. They occur at odd multiples of a quarter wavelength, CL≈18CL \approx18, 53, 88 and 124 mm, and consecutive windows give couplings of opposite sign (green and purple boxes). The arrows mark the three windows used, CL1CL_1, CL2CL_2, CL3CL_3. In the lattice, where the bridges bend around the resonators, their lengths are CL1=16.5CL_1 = 16.5 mm (on-site couplings), CL2=54CL_2 = 54–55 mm and CL3=89CL_3 = 89–91 mm. While only three distinct couplings are required for this implementation, the spectrum can be extended to accommodate additional coupling values.

Figure 8 reports the hybridization diagrams as functions of the width of the bridges, for the three chosen lengths. As one can see, the frequency splittings are symmetric relative to f0f_0, assuring us that these bridges implement pure hoppings. Furthermore, Δf\Delta f increases from 0 monotonically with the width of the acoustic bridge. This enables us to identify the widths WiW_i of the bridges that implement coupling strengths 1 and 1/2, in some fixed frequency units. In the lattice, each resonator is shared by several bridges, which reduces every coupling to about 0.8 of its dimer value. We therefore re-tuned the widths once on the full lattice (final widths 2.17–2.67 mm) and trimmed each bridge length within its window. The coupling matrix reconstructed from the simulated lattice modes then matches Eq. (14), including all coupling signs, with every coupling type within 2% of its target and on-site offsets of 2.7 Hz rms, compared with a coupling strength of 40 Hz.

Hybridization diagrams

Figure 8. Hybridization diagrams. a) Dimer’s resonant frequencies as function of bridge width for the three chosen coupling lengths (CLs), computed with the bridge geometries used in the lattice (CL=16.5CL = 16.5, 55.1 and 89.1 mm). Parameter σ\sigma denotes the standard deviation of the average frequency from f0f_0, indicated by the dotted line (σ=3.71\sigma= 3.71, 1.85 and 0.97 Hz), confirming the high symmetry of the hybridization diagrams. b) Coupling strength Δf\Delta f of the three CLs in a). The intersections with the target strengths (dotted lines: 24.1 Hz for strength 1/2 and 46.3 Hz for strength 1) determine the widths W1=2.17W_1 = 2.17, W2=2.34W_2 = 2.34 and W3=2.50W_3 = 2.50 mm that yield equivalent coupling strengths across different CL values.

Numerical Validation

The finalized COMSOL model, a 5×55 \times5 lattice of 100 H-resonators, can be seen in Figure 10, together with its simulated lattice modes. ulated resonant spectrum under various conditions. Its repeating unit cell, shown in Figure 9, consists of one column of four stacked H-resonators, the two on-site bridges between them, and the eight bridges that connect it to the neighboring cells in the x1x_1 and x2x_2 directions. This should be compared with schematic of the couplings in Figure 5, derived from the tight-binding Hamiltonian.

Repeating unit cell of the acoustic lattice

Figure 9. Repeating unit cell of the acoustic lattice. Four H-resonators are stacked in one column (orbitals 2, 4, 3, 1 from bottom to top); those carrying orbitals 1 and 2 are oriented along x1x_1, those carrying 3 and 4 along x2x_2. The two on-site bridges (CL1CL_1, green) join the stacked resonators, and eight bridges of lengths CL2CL_2 (blue) and CL3CL_3 (magenta) connect the cell to its neighbors in the x1x_1 and x2x_2 directions (translucent). Bridge widths are 2.17–2.67 mm.

Band spectra and acoustic pressure profiles of the 5 × 5 lattice

Figure 10. a) Band spectrum of the 5×55 \times5 system shown in d) (100 resonator modes). Four modes lie inside the bulk gap (4807–4893 Hz), within 2.5 Hz of f0f_0 (inset), one at each corner: 1) (0, 4), orbitals 3/4; 2) and 3) the (0, 0) (orbital 1) and (4, 0) (orbitals 3/4) corner modes, which are degenerate to within 0.09 Hz and therefore appear hybridized; 4) (4, 4), orbital 2. b) Band spectrum of the system shown in e), where the corner cell (0, 0) is removed, a perturbation that preserves the mirror symmetry. Each in-gap mode is labeled according to its corresponding pressure profile shown in e). In-gap states: 2) (0, 4) and 3) (4, 0), orbitals 3/4, at 4850.0 and 4850.6 Hz; 4) the (0, 0) corner mode, which has moved onto orbital 1 of the cells (0, 1) and (1, 0), at 4851.5 Hz; 5) (4, 4), orbital 2, at 4852.9 Hz. States 1) and 6), at 4836.2 and 4865.2 Hz, are defect states bound to the removed corner. c) The band spectrum of the periodic 5×55 \times5 lattice (Floquet unit cell evaluated at k=2πn/5k = 2\pi n/5) is cleanly gapped (4792–4906 Hz), with no modes inside the gap. d) The acoustic pressure profiles of the in-gap modes in a). e) Acoustic pressure profiles of the in-gap modes in b). All three-dimensional views share one orientation: the origin (0, 0) is the back column, the x1x_1 and x2x_2 directions point towards the viewer, and the corner columns are labeled.

First, as predicted, a simulation with periodic boundary conditions returns a clean gapped spectrum, assuring us the bulk phase has the expected characteristic (Figure 10(c)); this calculation applies Floquet-periodic boundary conditions to the unit cell of Figure 9. Secondly, in an open configuration, the model exhibits mid-gap modes localized at the corners, with resonant frequencies within 2.5 Hz of f0f_0, while the bulk gap extends ±43\pm43 Hz around it (Figure 10(a,Figure 10d)). Each of the four corners of the sample hosts one mode: the corners on the mirror diagonal host modes on orbitals 1 and 2, and the two off-diagonal corners host modes on the combination of orbitals 3 and 4, as predicted by the tight-binding model.

Indeed, up to hybridizations which are ultrasensitive to small details and are impossible to control, the zero modes seen in the COMSOL simulation reported in Figure 10(a,Figure 10d) are very similar to the ones reported in Figure 4.

Lastly, we demonstrate that the corner can be modified yet, as long as we preserve the mirror symmetry, the mid-gap corner modes endure (Figure 10(b,Figure 10e)). Removing the corner cell (0, 0) moves the (0, 0) corner mode onto orbital 1 of the neighbouring cells (0, 1) and (1, 0), where it stays mid-gap (4851.5 Hz), exactly as the tight-binding model predicts, while the other three corner modes shift by less than 1 Hz. The perturbation also lifts the near-degeneracy of the (0, 0) and (4, 0) modes seen in Figure 10(a), so that each corner mode in Figure 10(b) sits on a single corner. Two further states, at 4836 and 4865 Hz, are bound to the defect itself and remain well separated from the corner modes.

References

References

  1. [1]W. A. Benalcazar, B. A. Bernevig, T. L. Hughes, Quantized electric multipole insulators, Science 357, 61 (2017).DOI
  2. [2]W. A. Benalcazar, B. A. Bernevig, T. L. Hughes, Electric tricultipole moments, topological multipole moment pumping, and chiral hinge states in crystalline insulators, Phys. Rev. B 96, 245115 (2017).DOI
  3. [3]C. Peterson, W. Benalcazar, T. Hughes, G. Bahl, A quantized microwave quadrupole insulator with topologically protected corner states, Nature 555, 346–350 (2018).DOI
  4. [4]M. Serra-Garcia, V. Peri, R. Süsstrunk, O. R. Bilal, T. Larsen, L. G. Villanueva, S. D. Huber, Observation of a phononic quadrupole topological insulator, Nature 555, 342–345 (2018).
  5. [5]F. Schindler, A. M. Cook, M. G. Vergniory, Z. Wang, S. S. P. Parkin, B. A. Bernevig, T. Neupert, Higher-order topological insulators, Sci. Adv. 4, eaat0346 (2018).DOI
  6. [6]F. Schindler, T. Neupert, Topological crystalline insulators, in Topological Matter, edited by D. Bercioux, J. Cayssol, M. Vergniory, M. Reyes Calvo, Springer Series in Solid-State Sciences, Vol. 190 (Springer, Cham, 2018).DOI
  7. [7]B. Xie, H.-X. Wang, X. Zhang, P. Zhang, J.-H. Jiang, M. Lu, Y. Chen, Higher-order band topology, Nat Rev Phys 3, 520–532 (2021).DOI
  8. [8]Y.-B. Yang, J.-H. Wang, K. Li, Y. Xu, Higher-order topological phases in crystalline and non-crystalline systems: a review, J. Phys.: Condens. Matter 36, 283002 (2024).DOI
  9. [9]S. Hayashi, Classification of topological invariants related to corner states, Lett Math Phys 111, 118 (2021).DOI
  10. [10]J. Bellissard, C*-algebras in solid state physics, in Evans, D.E., Kaˇcinski, editors, “Operator algebras and applications Vol. II.,” (University Press, Cambridge, 1988).DOI
  11. [11]J. Bellissard, Noncommutative Geometry of Aperiodic Solids, in H. Ocampo, E. Pariguan, S. Paycha, editors, Geometric and Topological Methods for Quantum Field Theory (World Sci. Publ., River Edge, NJ, 2003).DOI
  12. [12]J. Bellissard, Coherent and Dissipative Transport in Aperiodic Solids, 413–86. Lecture Notes in Physics 597. Berlin: Springer, 2003.
  13. [13]E. Prodan, Quantum transport in disordered systems under magnetic fields: A study based on operator algebras, Applied Mathematics Research Express 2013, 176-255 (2013).DOI
  14. [14]J. Bellissard, K-theory of C*-algebras in solid state physics, Lecture Notes in Physics 257, 99-156, (1986).
  15. [15]J. Kellendonk, Noncommutative geometry of tilings and gap labelling, Rev. Math. Phys. 7, 1133–1180 (1995).DOI
  16. [16]J. Kellendonk, T. Richter, H. Schulz-Baldes, Edge current channels and Chern numbers in the integer quantum Hall effect, Rev. Math. Phys. 14, 87–119 (2002).
  17. [17]C. Bourne, J. Kellendonk, A. Rennie, The K-theoretic bulk-edge correspondence for topological insulators, Ann. Henri Poincaré 18, 1833–1866 (2017).DOI
  18. [18]N. D. Mermin, The topological theory of defects in ordered media, Rev. Mod. Phys. 51, 591-648 (1979).DOI
  19. [19]J. C. Y. Teo, C. L. Kane, Topological defects and gapless modes in insulators and superconductors, Phys. Rev. B 82, 115120 (2010).DOI
  20. [20]J. C. Y. Teo, T. L. Hughes, Topological defects in symmetry-protected topological phases, Annu. Rev. Condens. Matter Phys. 8, 211–237 (2017).DOI
  21. [21]E. Prodan, Topological lattice defects by groupoid methods and Kasparov’s KK-theory, J. Phys. A: Math. Theor. 54, 424001 (2021).DOI
  22. [22]D. Polo Ojito, E. Prodan, and T. Stoiber, A space-adiabatic approach for bulk-defect correspondences in lattice models of topological insulators, arXiv:2410.24097 (2024).arxiv.org/abs/2410.24097
  23. [23]D. P. Williams, A tool kit for groupoid C*-algebras, (AMS, Providence, 2019).DOI
  24. [24]D. Polo Ojito, E. Prodan, T. Stoiber, C*-framework for higher-order bulk-boundary correspondence, Commun. Math. Phys. 406, 233 (2025).DOI
  25. [25]S. Sarkar, X. Mao, K. Sun, “Mirror symmetry protected higher-order topological zero-frequency boundary and corner modes in Maxwell lattices,” Phys. Rev. B 108, L060103 (2023).DOI
  26. [26]W. A. Benalcazar and A. Cerjan, Chiral-symmetric higher-order topological phases of matter, Phys. Rev. Lett. 128, 127601 (2022).
  27. [27]D. Wang, Y. Deng, J. Ji, M. Oudich, W. A. Benalcazar, G. Ma, Y. Jing, Realization of a ℤ-classified chiral-symmetric higher-order topological insulator in a coupling-inverted acoustic crystal, Phys. Rev. Lett. 131, 157201 (2023).DOI
  28. [28]COMSOL Multiphysics® v. 6.4. www.comsol.com. COMSOL AB, Stockholm, Sweden.
  29. [29]J. Saunders, C. Prodan, E. Prodan, Acoustic metamaterials with positive and negative couplings using H-shaped resonators, arXiv:2510.26598 (2025).
  30. [30]S.-Q. Wu, W. Cheng, X.-Y. Liu, B.-Q. Wu, E. Prodan, C. Prodan, J.-H. Jiang, Observation of D-class topology in an acoustic metamaterial, Sci. Bull. 69, 893–900 (2024).DOI
  31. [31]S. B. Nadler, Jr., Hyperspaces of sets, (Marcel Dekker Inc, New York, 1978).
  32. [32]M. Barnsley, Fractals everywhere, (Academic Press, San Diego, USA, 1993).
  33. [33]J. M. G. Fell, A Hausdorff topology for the closed subsets of a locally compact non-Hausdorff space, Proc. Amer. Math. Soc. 13, 472–476 (1962).DOI
  34. [34]D. S. Freed, G. W. Moore, Twisted Equivariant Matter, Ann. Henri Poincaré 14, 1927–2023 (2013).DOI
  35. [35]J. Kellendonk, E. Prodan, Bulk-boundary principle in Sturmian Kohmoto type models, Annals of Henri Poincaré 20, 2039-2070 (2019).
  36. [36]E. Prodan, H. Schulz-Baldes, Generalized Connes–Chern characters in KK-theory with an application to weak in-variants of topological insulators, Reviews in Mathematical Physics 28, 1650024 (2016).DOI
  37. [37]E. Prodan, H. Schulz-Baldes, Bulk and Boundary Invariants for Complex Topological Insulators: From K-Theory to Physics (Springer, Berlin, 2016).

Paper details

vlnc:W_hayaf4az
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 10

downloads · 1

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents