betaFeedback

WorksPhysics and Astronomy

Comparative study of Kondo effect in Vanadium dichalcogenides VX2_2 (X=Se & Te)

Abstract

We report on the electrical transport, magnetotransport, and magnetic properties studies on the transition metal dichalcogenides VSe2_2 and VTe2_2 and draw a comprehensive comparison between them. We observe Kondo effect in both systems induced by the exchange interaction between localized moments and conduction electrons at low temperature, resulting into resistance upturn at 6 K for VSe2_2 and 17 K for VTe2_2. From the field dependent resistance measurements we find that the data is fitted best with modified Hamann equation corrected by the quantum Brillouin function for VSe2_2, while the data is fitted best with modified Hamann equation corrected by the classical Langevin function for VTe2_2. Interestingly, we observe a contrasting magnetoresistance (MR) property between these systems across the Kondo temperature. That means, negative MR is found in both systems in the Kondo state. In the normal state MR is positive for VSe2_2, while it is negligible for VTe2_2. In addition, both systems show weak ferromagnetism at low temperature due to intercalated V atoms.

Introduction

For more than six decades, the TMDCs are widely discussed in the verge of the ground state properties like CDW and superconductivity [1, 2, 3, 4, 5, 6, 7, 8, 9]. Among them, from the group V TMDCs, the ditelluride-based compounds are isostructural to each other having the monoclinic crystal structure with 1T′1T^{\prime} phase below 300 K [10, 11, 12, 13, 14, 15], while the diselenide- and the disulfur-based compounds are available in the trigonal crystal structure with 1T1T or 2H2H phase [16, 17, 18, 19, 20, 21]. Despite being isostructural, these compounds show differing electronic and magnetic properties. For instance, VTe2\mathrm{VTe}_{2} shows a normal to commensurate CDW (C-CDW) transition at 474 K [13, 22, 23], while NbTe2\mathrm{NbTe}_{2} shows incommensurate CDW (IC-CDW) transition at 550 K and IC-CDW to C-CDW transition at room temperature [11, 24], in addition to a superconducting transition (TcT_{\mathrm{c}}) at ≈0.5\approx0.5 K [25, 26]. On the other hand, TaTe2\mathrm{TaTe}_{2} shows a normal to IC-CDW transition at 170 K [27, 28, 29]. Similarly, VSe2\mathrm{VSe}_{2} shows an IC-CDW transition at around 110 K and an IC-CDW to C-CDW at 70 K [30, 31, 32, 33]. NbSe2\mathrm{NbSe}_{2} shows an IC-CDW transition at 33 K and superconductivity at 7.2 K [34]. TaSe2\mathrm{TaSe}_{2} shows an IC-CDW transition at 600 K and a C-CDW transition at 473 K in the 1T1T phase [35], while an IC-CDW transition at 122 K and a C-CDW transition at 90 K is found in the 2H2H phase [16, 36]. VS2\mathrm{VS}_{2} is reported to show a CDW transition below 304 K [21, 37, 38]. Though NbS2\mathrm{NbS}_{2} is not found to show a clear CDW order, recently it was suggested to be at the verge of a CDW order following the diverse electronic properties in NbS2\mathrm{NbS}_{2} [20, 39]. On the other hand, TaS2\mathrm{TaS}_{2} shows IC-CDW phase below 550 K and a nearly commensurate CDW (NC-CDW) phase below 350 K and C-CDW phase was found below 180 K in the 1T1T phase [40], while a short range CDW transition is found below 75 K in the 2H2H phase [41]. Magnetotransport studies on TaTe2\mathrm{TaTe}_{2} and NbTe2\mathrm{NbTe}_{2} suggest a linear dependence of MR on the applied field [11, 27], while a quadratic MR is found from VTe2\mathrm{VTe}_{2} [42]. In contrast to TaTe2\mathrm{TaTe}_{2} and NbTe2\mathrm{NbTe}_{2}, VTe2\mathrm{VTe}_{2} shows a weak ferromagnetic ordering at low temperature. Also, VTe2\mathrm{VTe}_{2} is found to show a resistivity upturn due to Kondo effect [33, 42, 43, 44]. However, the resistivity upturn found in VSe2\mathrm{VSe}_{2} is still under debate. Some reports interpreted the resistivity upturn to the Kondo effect in the paramagnetic regime [43], while the other reports interpreted it to a weak localization [42]. TaSe2\mathrm{TaSe}_{2} in 2H2H phase is reported to show antiferromagnetic ordering [45]. TaS2\mathrm{TaS}_{2} in the 1T1T phase shows ferromagnetic ordering due to localized spins [46]. As a matter of fact, Kondo effect was not observed in TaTe2\mathrm{TaTe}_{2} and NbTe2\mathrm{NbTe}_{2} systems.

In this contribution, we report a comprehensive comparison study between VSe2\mathrm{VSe}_{2} and its isovalent compound VTe2\mathrm{VTe}_{2} on their electrical transport, magnetotransport, and magnetic properties. We observe a low temperature resistivity upturn in both systems due to Kondo effect induced by the exchange interaction between localized moments and conduction electrons at low temperature. The electrical transport data of VSe2\mathrm{VSe}_{2} measured under various applied magnetic fields can be explained well with the modified Hamann equation following the Brillouin function [47] using the quantum mechanical behaviour of magnetic moments [48]. From a similar transport study on VTe2\mathrm{VTe}_{2} we find that the data can be fitted well with modified Hamann equation following the Langevin function [42] using the classical theory [48]. Foremost these observations confirm the presence of Kondo effect in both systems, specifically for VSe2\mathrm{VSe}_{2} in which the mechanism of resistivity upturn is elusive [33, 42, 43]. Further, we find negative magnetoresistance (MR) from both systems in the Kondo state, while MR behaves differently in the normal state.

Experimental Details

Single crystal of VTe2\mathrm{VTe}_{2} was grown by the chemical vapor transport (CVT) technique using iodine (crystalline, 99.99%, metals basis, Alfa Aesar) (2 mg/cm3^{3}) as a transport agent[49]. In the first step, stoichiometric amounts of V (powder, 99.5%, metals basis, Alfa Aesar) and Te (powder, 99.99%, metals basis, Alfa Aesar) were mixed thoroughly and sealed in a quartz ampoule under vacuum. The ampoule was then slowly heated to 1000°C at a rate of 2.5°C/min and kept there for 8 h before quenched in the normal water. The powder was regrinded, sealed in quartz ampoule under vacuum together with pieces of crystallized iodine (crystalline, 99.99%, metals basis, Alfa Aesar) (2 mg/cm3^{3}). The ampoule was loaded into a three-zone tube furnace where the temperatures were set at 900°C at the hot-zone and 810°C was set at the cold-zone. After 5 days of reaction, we obtained shiny single crystals with a typical dimension of 5 mm×5 mm at the cold-zone. Similarly, single crystals of VSe2\mathrm{VSe}_{2} were grown by the above method my mixing the stoichiometric amounts of V (powder, 99.5%, metals basis, Alfa Aesar) and Se (shot, 99.999%, metals basis, Alfa Aesar), except that 1000°C was set at the hot-zone and 950°C was set at the cold-zone. After 5 days of reaction, we obtained shiny single crystals of typical dimension 15 mm×6 mm at the cold-zone.

Chemical composition of the single crystals were determined by the energy-dispersive X-ray analysis (EDX) equipped with a scanning electron microscope (Quanta 250 FEG) and phase purity was checked by X-ray diffraction (XRD) patterns measured using Cu-kαk_{\alpha}-radiation (Rigaku MiniFlex II and Rigaku SmartLab 9KW). Differential scanning calorimetry (DSC) (Q2000 of TA Instruments) was performed to measure the heat flow curve of the sample in both heating and cooling modes.

Electrical transport measurements were done in a physical property measurement system (Quantum Design PPMS-9T) using a standard four-probe method, with the electrical current applied along the plane of sample (abab-plane). For magnetotransport measurements the magnetic field was applied at different polar angles with respect to the abab-plane. Copper (Cu) leads were connected to the sample by vacuum compatible silver epoxy Epo-Tek H2OE. The sample temperature was varied between 2 K and 330 K during the transport measurements. DC magnetization measurements were performed using the magnetic property measurement system (Quantum Design MPMS-7T) equipped with vibrating sample magnetometer superconducting quantum interference device (VSM-SQUID). Temperature dependence of the magnetization in zero-field-cooled (ZFC) and field-cooled (FC) modes has been carried out under different applied magnetic fields up to 7 T in the temperature range of 5-300 K. Field dependent magnetization [M(H)][M(H)] has also been carried out at different temperatures.

Results and Discussions

Single crystals of VTe₂ and VSe₂ were structurally analyzed using the powder X-ray diffraction (XRD) at room temperature. High intense diffraction peaks corresponding to the (001) plane of VTe₂ are shown in Figure 1(a) and (001) plane of VSe₂ are shown in Figure 1(b). VTe₂ crystallizes into the monoclinic structure with the space group C2/m (12) in the 1T′ phase at room temperature, while VSe₂ crystalizes into the trigonal structure with space group of Pˉ3m1\bar{P}3m1 (164) in the 1T phase [13, 50]. From EDX measurements as shown in Figure 1(c) and Figure 1(d) we identify that the studied samples have actual compositions of V1.08_{1.08}Te₂ and V0.86_{0.86}Se₂, respectively. Thus, we obtained 8% vanadium excess VTe₂ and 14% vanadium deficient VSe₂ single crystals. Herein, for the convenience, we represent these crystals by their nominal compositions of VSe₂ and VTe₂.

Image not extracted

Figure 1. (a) and (b) Powder X-ray diffraction (XRD) pattern of VTe₂ and VSe₂ single crystals. Insets in (a) and (b) are the optical images of the single crystals. (c) and (d) Energy dispersive X-ray spectroscopy (EDX) data of VTe₂ and VSe₂ single crystals, respectively.

Figure 2(a) shows temperature dependent in-plane electrical resistance of VTe₂. The resistance curve shows a metallic nature, in principle, except that an upturn is noticed at low temperature with a resistance minima at Tm=17T_{\mathrm{m}}=17 K as can be seen from the inset of Figure 2(a). To explore further on the resistance upturn mechanism, it was measured at various magnetic fields within the temperature range of 2-40 K as plotted in Figure 2(b). We observe decrease in resistance upturn with increasing magnetic field up to 9 T. Further, the field dependent resistance curves are perfectly fitted with the (1) and (2) without and with applied magnetic field, respectively. In (1), the first term (R0R_0) is residual resistance, the second term (qT2qT^2) represents the electron-electron interaction, and the third term is the Hamann expression [51] due to s−ds-d exchange interaction [42, 52]. Hamann expression is an empirical equation used to calculate the exchange between localized magnetic moments and conduction electrons. In the third term, RK0R_{\mathrm{K0}} is the temperature-independent Kondo resistance, TKT_{\mathrm{K}} is the Kondo temperature, and S is the total spin of the magnetic impurities. Teff=T2+TW2T_{\mathrm{eff}}=\sqrt{T^2+T_{\mathrm{W}}^2}, where kBTWk_{\mathrm{B}}T_{\mathrm{W}} is the effective Ruderman-Kittel-Kasuya-Yosida (RKKY) interaction strength. From the fitting, we obtained a Kondo temperature TK=12T_{\mathrm{K}}=12 K and S=0.5. These values are in good agreement with previous report on VTe₂ single crystal [42]. In (2), the Hamann term is multiplied by [1−L2(μHHkBTeff)]\left[1-L^2\left(\frac{\mu_{\mathrm{H}}H}{k_{\mathrm{B}}T_{\mathrm{eff}}}\right)\right] where L(x)L(x) is Langevin function L(x)=coth⁡(x)−1/xL(x)=\coth(x)-1/x (see Table 1 for the fitting parameters). Primarily, Hamann equation involves Brillouin function [47] to describe the quantum mechanical behavior of magnetic moments and provides a more accurate description of their statistical distribution. In quantum theory, the magnetic moments are quantized and the orientations of magnetic moment with respect to applied magnetic field are specified by some possible components of magnetic moment along field direction [48]. On the other hand, the Langevin function [42] is a simplified model derived from classical statistical mechanics. In Langevin’s classical theory, it is assumed that the mutual interaction between the magnetic dipoles is negligible and magnetic moments can possess any orientation with respect to applied magnetic field [48].

Figure 2. (a) In-plane electrical resistance of VTe2_2 plotted as a function of temperature. Inset in (a) shows low-temperature resistance upturn at a temperature minima Tm=17T_\mathrm{m}=17 K. (b) Temperature dependent electrical resistance plotted for various magnetic fields applied parallel to cc-axis. Solid lines in (b) are fittings to Eq. (1) and Eq. (2). (c) Magnetoresistance, MR (%), plotted as a function of field applied parallel to the cc-axis (θ=0∘\theta= 0^\circ). (d) MR (%) plotted as function of applied field angle. Measuring geometry is shown in the inset of (d). (e) Symmetrized MR (%) of (d) is plotted in the polar graph. (f) Differential scanning calorimetry (DSC) data is plotted as function of temperature for both cooling and heating cycle. In (f), the charge density wave ordering temperature (TCDWT_\mathrm{CDW}) is marked from both heating and cooling cycles.

HH (T)R0R_0 (mΩ\Omega)qq (μΩ\mu\Omega/K2^2)RK0R_{\mathrm{K0}} (mΩ\Omega)TWT_W (K)μ\mu (μB\mu_B)
016.6140(4)0.5719(4)1.0782(4)3.900(3)
116.6530(4)0.5645(4)1.0316(4)2.423(3)4.042(3)
216.6563(4)0.5641(4)1.0295(4)2.665(3)2.569(3)
316.6786(4)0.5596(4)1.0028(4)2.823(3)2.045(3)
416.7015(4)0.5561(4)0.9740(4)3.147(3)1.789(3)
516.7343(4)0.5508(4)0.9331(4)3.396(3)1.631(3)
616.7778(4)0.5435(4)0.8780(4)3.632(3)1.510(3)
716.8104(4)0.5398(4)0.8334(4)3.916(3)1.445(3)
816.8592(4)0.5320(4)0.7692(4)4.135(3)1.379(3)
916.9061(4)0.5263(4)0.7054(4)4.332(3)1.329(3)

Table 1. Kondo fitting parameters of VTe2_2

R(T)=R0+qT2+RKO[1−ln⁡(TeffTK)ln⁡2(TeffTK)+S(S+1)π2](1)R(T) = R_0 + qT^2 + R_{KO}\left[1 - \frac{\ln\left(\frac{T_\mathrm{eff}}{T_K}\right)}{\sqrt{\ln^2\left(\frac{T_\mathrm{eff}}{T_K}\right) + S(S+1)\pi^2}}\right] \tag*{(1)}
R(T)=R0+qT2+RKO[1−ln⁡(TeffTK)ln⁡2(TeffTK)+S(S+1)π2][1−L2(μHkBTeff)](2)R(T) = R_0 + qT^2 + R_{KO}\left[1 - \frac{\ln\left(\frac{T_\mathrm{eff}}{T_K}\right)}{\sqrt{\ln^2\left(\frac{T_\mathrm{eff}}{T_K}\right) + S(S+1)\pi^2}}\right]\left[1 - L^2\left(\frac{\mu H}{k_B T_\mathrm{eff}}\right)\right] \tag*{(2)}

Figure 2(c) depicts magnetoresistance (MR%), MR%=R(H)−R(0)R(0)×100MR\% = \frac{R(H)-R(0)}{R(0)} \times100, plotted as a function of applied field measured at below (2 K) and above (25 K & 50 K) the Kondo temperatures. We notice that at 2 K, below the Kondo temperature, VTe2_2 shows a negative MR and above Kondo temperature, the MR is negligible. This is because the magnetic field reduces fluctuations of localized impurity magnetic moments and spin dependent exchange scattering [53]. Hence, below a critical magnetic field (BcB_\mathrm{c}), the MR is negative and above BcB_\mathrm{c}, the Kondo effect vanishes. In case of VTe2_2 the value of BcB_c is very high [42] which is beyond our experimental scope. Figure 2(d) shows MR (%) plotted as a function of field angle with respect to the sample surface normal (cc-axis) at an applied field of 6 T. Measuring geometry is shown in the inset of Figure 2(d). Red solid-lines in Figure 2(d) are fittings to the Eq. (3). In Eq. (3), the first tern is a constant and α\alpha is an amplitude. Figure 2(e) shows symmetrized angular dependent MR plotted in the polar graph for the temperatures 2 K, 8 K, and 50 K. As can be seen from Figure 2(e), MR shows in-plane small anisotropy in the Kondo state (2 K) but becomes completely isotropic in the normal state (8 and 50 K). Ideally Kondo systems show isotropic MR but a small anisotropy could be there due to the presence of a crystal anisotropy [53]. DSC measurements are performed in both heating and cooling modes with a ramp rate of dT/dt=10 K/min as depicted in Figure 2(f). During cooling and heating cycles of DSC measurements we noticed a hump and a dip, respectively, at a sample temperature of 470±5470\pm5 K that is originated from the charge density wave (CDW) [22].

MR(θ)=MR0+αcos⁡(2θ)(3)MR(\theta) = MR_0 + \alpha\cos(2\theta) \tag*{(3)}

Figure 3 shows magnetic measurements on VTe2_2 with field applied parallel to the cc-axis. Figure 3(a) shows temperature dependent magnetic susceptibility measured with a field of 1 T within the temperature range of 3-300 K in the field-cooled (FC) and zero-field-cooled (ZFC) modes. Here, it can be seen that ZFC and FC are identical. Further, we measured the temperature dependent magnetic susceptibility by varying the field in the FC mode as shown in Figure 3(b). A broad hump-like structure with a maximum at around 17 K has been noticed in the susceptibility data when measured with a magnetic field of 1 T, which is then enhanced at higher magnetic fields above 3 T as we increase the field due to the crossover from high temperature localized moments of Kondo impurities to fully compensated moments at low temperature [42, 54]. However, at higher magnetic fields this crossover gets weaker as a result the resistance upturn decreases. Figure 3(c) shows magnetization isotherms, M(H)M(H), measured at 5 and 300 K. From the M(H)M(H) data we notice a soft ferromagnetic-like ordering at the room temperature which is in agreement with previous reports on VTe2_2 [47, 55, 56].

Image not extracted

Figure 3. (a) Magnetic susceptibility of VTe2_2 plotted as a function of temperature with a field of 1 T applied parallel to cc-axis measured in the FC and ZFC modes. (b) Same as (a) but measured for different magnetic fields in the FC mode. (c) Magnetization isotherms M(H)M(H) measured at 5 K and 300 K.

Next, Figure 4(a) shows temperature dependent zero-field in-plane electrical resistance of VSe2_2. Overall, the resistance curve suggests a metallic behaviour except that a hump at around 100 K and a resistance upturn at low temperature is observed. The hump at 100 K is due to the incommensurate charge density order (IC-CDW) as noticed in the previous reports from this system [30, 33, 43, 44, 57] [58, 59, 60, 61]. Inset in Figure 4(a) shows a resistance minima (TmT_m) at 6 K. To understand the resistance upturn mechanism, we performed field dependent resistance measurements within the temperature range of 2 K to 12 K by varying the magnetic fields up to 9 T as plotted in Figure 4(b). As can be seen from Figure 4(b), resistance upturn decreases with increasing field and disappears at 7 T, suggesting Kondo effect as the possible origin of the resistance upturn. Solid-lines in Figure 4(b) are the fittings to Eq. (4) in absence of applied magnetic field and Eq. (5) in presence of applied magnetic field with a modified Hamann term [43, 44, 47] [62]. Eq. (4) is almost similar to Eq. (1), except that the second term (qT3qT^3) in Eq. (4) represents the interband (s−ds-d) e−phe-ph scattering while it is e−ee-e scattering (qT2qT^2) contribution in Eq. (1). From the fitting, we estimated a Kondo temperature (TKT_K) of about 6 K and the spin component SS=0.5, which are in good agreement with previous report on VSe2 [43]. In Eq. (5), the Hamann expression is modified using the Brillouin function, B(x)=2S+12Scoth⁡2S+12Sx−12Scoth⁡12SxB(x)=\frac{2S+1}{2S}\coth\frac{2S+1}{2S}x-\frac{1}{2S}\coth\frac{1}{2S}x in the quantum limit. See Table 2 for the fitting parameters.

Figure 4. (a) In-plane electrical resistance of VSe2 plotted as a function of temperature. A hump at CDW transition temperature of 100 K is noticed on the resistance curve. Inset in (a) shows the resistance upturn at a temperature minima TmT_m=6 K. (b) Temperature dependent electrical resistance plotted for various magnetic fields applied parallel to the cc-axis. Solid lines in (b) are fittings to Eq. (4) and Eq. (5). (c) Magnetoresistance, MR (%), plotted as a function of field applied parallel to the cc-axis (θ=0∘\theta= 0^\circ) is in the left panel and for the field applied perpendicular to the cc-axis (θ=90∘\theta= 90^\circ) is shown in the right panel. (d) MR (%) is plotted as function of the field angle with applied field of 9 T (left panel) and 3 T (right panel). (e) Symmetrized MR (%) of (d) is plotted in the polar graph with an applied field of 9 T. (f) Symmetrized MR (%) of (d) is plotted in the polar graph with an applied field of 3 T.

H (T)R0R_0 (mΩ\Omega)qq (μΩ/K3\mu\Omega/\mathrm{K}^3)RKOR_{KO} (mΩ\Omega)TWT_W (K)
09.4223(4)0.0483(4)0.1121(4)2.455(3)
19.3600(4)0.0485(4)0.1751(4)2.023(3)
29.4211(4)0.0480(4)0.1124(4)1.452(3)
39.4017(4)0.0497(4)0.1367(4)2.160(3)
49.4301(4)0.0497(4)0.1061(4)1.832(3)
59.4508(4)0.0480(4)0.0843(4)1.385(3)
69.4440(4)0.0506(4)0.0965(4)1.694(3)

Table 2. Kondo fitting parameters of VSe2\mathrm{VSe}_2

R(T)=R0+qT3+RKO[1−ln⁡(TeffTK)ln⁡2(TeffTK)+S(S+1)π2](4)R(T)=R_0+qT^3+R_{K O}\left[1-\frac{\ln\left(\frac{T_{eff}}{T_K}\right)}{\sqrt{\ln^2\left(\frac{T_{eff}}{T_K}\right)+S(S+1)\pi^2}}\right] \tag*{(4)}
R(T)=R0+qT3+RKO[1−ln⁡(TeffTK)ln⁡2(TeffTK)+S(S+1)π2][1−B2(gμBSHkBTeff)](5)R(T)=R_0+qT^3+R_{K O}\left[1-\frac{\ln\left(\frac{T_{eff}}{T_K}\right)}{\sqrt{\ln^2\left(\frac{T_{eff}}{T_K}\right)+S(S+1)\pi^2}}\right]\left[1-B^2\left(\frac{g\mu_BSH}{k_BT_{eff}}\right)\right] \tag*{(5)}

Left panel in Figure 4(c) depicts the field dependent MR(%), measured at various temperatures for the field applied parallel to cc-axis (θ=0∘\theta= 0^\circ). The right panel in Figure 4(c) depicts MR(%) measured perpendicular to cc-axis (θ=90∘\theta= 90^\circ). We can see from Figure 4(c) that for both field orientations the MR is negative (positive) below (above) the Kondo temperature (6 K). Figure 4(d) depicts the angle dependent MR(%) measured at various temperatures with a magnetic field of 9 T (left panel) and 3 T (right panel). From Figure 4(d) we can see that the MR(%) has a maximum for H∥c and minimum for H⊥c under the magnetic field of 9 T. On the other hand it is reversed when the applied field is 3 T, which means that the MR(%) is minimum for H∥cH\parallel c and maximum for H⊥cH\perp c. Nevertheless, MR (%) sinusoidally depends on the field angle in going from H∥cH\parallel c to H⊥cH\perp c. The Red solid lines are the fits to Eq. (3). Figure 4 (e) and Figure 4 (f) represents the polar maps of the symmetrized data shown left and right panels of Figure 4 (d), respectively. Figure 4 (e) and Figure 4 (f) clearly show the out-of-plane anisotropic MR(%) in VSe2\mathrm{VSe}_2. Interestingly, the anisotropy is rotated by 90∘90^\circ between 3 T and 9 T. Anisotropic MR at 9 T is in good agreement with previous study [59]. Also, note here that the anisotropic MR is significant above the Kondo state, i.e. at higher magnetic fields (9 T) irrespective of the temperature. In the Kondo state (3 T), a small anisotropic behaviour is observed which is negligible.

Figure 5 shows magnetic properties studies on the VSe2\mathrm{VSe}_2 single crystals. Figure 5(a) shows temperature dependent magnetic susceptibility measured with a magnetic field of 1 T applied parallel to the c-axis within the temperature range of 3-300 K in the ZFC and FC modes. Here, it can be seen that ZFC and FC are identical. To observe the effect of Kondo screening on the magnetic properties, we measured the susceptibility by varying the magnetic field of up to 7 T within the temperature range of 3-30 K in FC mode as shown in Figure 5(b). Unlike in VTe2\mathrm{VTe}_2, we do not find a significant change in the susceptibility of VSe2\mathrm{VSe}_2 as a function of applied field, probably due to the low Kondo temperature (6 K) found in VSe2\mathrm{VSe}_2. Figure 5(b) shows the magnetization isotherm M(H)M(H) measured at 5 and 300 K. We clearly notice a sigmoid like M(H)M(H) curve at 5 K due to soft ferromagnetic ordering. This observation is different from previous reports where VSe2\mathrm{VSe}_2is found in bulk to be paramagnetic at all temperatures [60, 61, 63]. However, a strong ferromagnetic ordering is reported in monolayer VSe2\mathrm{VSe}_2 grown on HOPG or MoS2\mathrm{MoS}_2substrate at the room temperature [63]. Another recent report also demonstrated a small ferromagnetic signal in stoichiometric bulk VSe2\mathrm{VSe}_2, which they suggest to arise from vanadium impurities intercalated between the van der Waals layers.

Figure 5. (a) Magnetic susceptibility of VSe2\mathrm{VSe}_2 plotted as a function of temperature measured with a field of 1 T applied parallel to the c-axis in the FC and ZFC modes. (b) Same as (a) but measured for different magnetic fields in the FC mode. A hump in the magnetic susceptibility is noticed both in FC and ZFC modes at a CDW transition temperature of 100 K. (c) Magnetization isotherms M(H)M(H) measured at 5 K and 300 K.

Finally, on comparing the electrical resistivity, magnetotransport, and magnetic properties between VTe2\mathrm{VTe}_2 and VSe2\mathrm{VSe}_2, we find that both systems show low temperature resistivity upturn due to the Kondo effect with a Kondo temperature of 12 K for the former and 6 K for the later, suggesting stronger magnetic correlations in VTe2\mathrm{VTe}_2 compared to VSe2\mathrm{VSe}_2. Both systems show negative MR in the Kondo state. VSe2\mathrm{VSe}_2 shows negative to positive MR switching across the Kondo temperature of 6 K, while VTe2\mathrm{VTe}_2 shows negligible MR above the Kondo temperature of 12 K. Moreover, above the Kondo state, a strong anisotropic MR is observed in the case of VSe2\mathrm{VSe}_2, while it is almost negligible in VTe2\mathrm{VTe}_2. In case of VTe2\mathrm{VTe}_2 a weak anisotropic MR in the Kondo state is observed, whereas above the Kondo state the MR is negligible. Interestingly, though both systems show a low-temperature resistivity upturn due to the Kondo effect, under the magnetic field it behaves differently for different compounds. That means, VTe2_2 follows the Hamann law modified with the classical Langevin function with dominant contribution from the e−ee-e scattering, while VSe2_2 follows the Hamann law modified with the quantum Brillouin function (see Eq. (5)) with the dominant contribution from the interband (s−d)(s-d) e−phe-ph scattering. Different functions applicable to the same Kondo effect observed in different compounds can be understood from their differing Kondo temperatures. That means, the Kondo temperature of VTe2_2 (12 K) is almost two times higher than the Kondo temperature of VSe2_2 (6 K). On the other hand, a previous study on the single-crystalline nanoplates of VTe2_2 reported a Kondo temperature of 6 K and the resistivity data was best fitted following the Brillouin function [47]. These observations suggest that the Kondo temperature of these systems is thickness sensitive [64].

Conclusions

In conclusion, we have drawn a comprehensive comparison between the transition-metal dichalcogenides VSe2_2 and VTe2_2 on their electrical transport, magnetotransport, and magnetic properties. We observe the Kondo effect in both systems induced by the exchange interaction between localized moments and conduction electrons at low temperature, resulting into resistance upturn at Kondo temperature of 6 K for VSe2_2 and 12 K for VTe2_2. From the field dependent resistance measurements we find that the data is fitted best with modified Hamann equation corrected by the quantum Brillouin function for VSe2_2, while the data is best fitted with modified Hamann equation corrected by the classical Langevin function for VSe2_2. Interestingly, we observe a contrasting magnetoresistance (MR) properties between these systems across the Kondo temperature. In both systems examined, there is a manifestation of weak ferromagnetism at low temperatures. This phenomenon can be attributed to the presence of intercalated V atoms in both systems.

Acknowledgements

S. T. greatly acknowledges the financial support given by SERB-DST through the Grant no. SRG/2020/00393. This research is made use of the Technical Research Centre (TRC) Instrument Facilities of S. N. Bose National Centre for Basic Sciences, established under the TRC project of Department of Science and Technology, Govt. of India. The authors thank Prof. Priya Mahadevan for fruitful discussions.

References

  1. [1]L. H. Brixner. Preparation and properties of the single crystalline AB₂-type selenides and tellurides of niobium, tantalum, molybdenum and tungsten. Journal of Inorganic and Nuclear Chemistry, 24(3):257–263, 1962.DOI
  2. [2]B. E. Brown. The crystal structures of NbTe₂ and TaTe₂. Acta Crystallographica, 20(2):264–267, feb 1966.DOI
  3. [3]R. Nitsche, H. U. Bölsterli, and M. Lichtensteiger. Crystal growth by chemical transport reactions—I. Journal of Physics and Chemistry of Solids, 21(3-4):199–205, dec 1961.DOI
  4. [4]J. A. Wilson and A. D. Yoffe. The transition metal dichalcogenides discussion and interpretation of the observed optical, electrical and structural properties. Advances in Physics, 18(73):193–335, may 1969.DOI
  5. [5]J. A. Wilson, F. J. Di Salvo, and S. Mahajan. Charge-density waves and superlattices in the metallic layered transition metal dichalcogenides. Advances in Physics, 24(2):117–201, mar 1975.
  6. [6]S. Sharma, L. Nordström, and B. Johansson. Stabilization of charge-density waves in 1T-TaX₂ (X=S,Se,Te): First-principles total energy calculations. Physical Review B, 66(19), nov 2002.DOI
  7. [7]Robert E. Thorne. Charge-Density-Wave Conductors. Physics Today, 49(5):42–47, may 1996.DOI
  8. [8]C. M. WAYMAN and H. K. D. H. BHADESHIA. PHASE TRANSFORMATIONS, NONDIFFUSIVE. In Physical Metallurgy, pages 1507–1554. Elsevier, 1996.DOI
  9. [9]Indrani Kar, Joydeep Chatterjee, Luminita Harnagea, Y. Kushnirenko, A. V. Fedorov, Deepika Shrivastava, B. Büchner, P. Mahadevan, and S. Thirupathaiah. Metal-chalcogen bond-length induced electronic phase transition from semiconductor to topological semimetal in ZrX₂ (X=Se and Te). Physical Review B, 101(16), apr 2020.DOI
  10. [10]Kari Selte, Arne Kjekshus, H. Listou, Hertta Kyyhkynen, Ragnar A. Hoffman, and Anders Westerdahl. On the Magnetic Properties of Niobium Selenides and Tellurides. Acta Chemica Scandinavica, 19:258–260, 1965.DOI
  11. [11]Hongxiang Chen, Zhihlin Li, Xiao Fan, Liwei Guo, and Xiaolong Chen. Quantum linear magnetoresistance in NbTe₂. Solid State Communications, 275:16–20, jul 2018.DOI
  12. [12]F. Clerc, C. Battaglia, H. Cercellier, C. Monney, H. Berger, L. Despont, M. G. Garnier, and P. Aebi. Fermi surface of layered compounds and bulk charge density wave systems. Journal of Physics: Condensed Matter, 19(35):355002, aug 2007.DOI
  13. [13]K. D. Bronsema, G. W. Bus, and G. A. Wiegers. The crystal structure of vanadium ditelluride, V₍₁₊ₓ₎Te₂. Journal of Solid State Chemistry, 53(3):415–421, jul 1984.
  14. [14]Y. Liu, D. F. Shao, L. J. Li, W. J. Lu, X. D. Zhu, P. P. Tong, R. C. Xiao, L. S. Ling, C. Y. Xi, L. Pi, H. F. Tian, H. X. Yang, J. Q. Li, W. H. Song, X. B. Zhu, and Y. P. Sun. Nature of charge density waves and superconductivity in 1T-TaSe₂₋ₓTeₓ. Physical Review B, 94(4), jul 2016.DOI
  15. [15]T. Sörgel, J. Nuss, U. Wedig, R. K. Kremer, and M. Jansen. A new low temperature modification of TaTe₂—Comparison to the room temperature and the hypothetical 1T-TaTe₂ modification. Materials Research Bulletin, 41(5):987–1000, may 2006.DOI
  16. [16]Tomohisa Kumakura, Hiroki Tan, Tetsuya Handa, Masashi Morishita, and Hiroshi Fukuyama. Charge density waves and superconductivity in 2H-TaSe₂. Czechoslovak Journal of Physics, 46(S5):2611–2612, may 1996.DOI
  17. [17]K. Terashima, T. Sato, H. Komatsu, T. Takahashi, N. Maeda, and K. Hayashi. Charge-density wave transition of 1T-VSe₂ studied by angle-resolved photoemission spectroscopy. Physical Review B, 68(15), oct 2003.DOI
  18. [18]Gyeongcheol Gye, Eunseok Oh, and Han Woong Yeom. Topological Landscape of Competing Charge Density Waves in 2H-NbSe₂. Physical Review Letters, 122(1), jan 2019.DOI
  19. [19]T. Ritschel, J. Trinckauf, K. Koepernik, B. Büchner, M. v. Zimmermann, H. Berger, Y. I. Joe, P. Abbamonte, and J. C. Geck. Orbital textures and charge density waves in transition metal dichalcogenides. Nature Physics, 11(4):328–331, mar 2015.DOI
  20. [20]Maxime Leroux, Laurent Cario, Alexei Bosak, and Pierre Rodière. Traces of charge density waves in NbS₂. Physical Review B, 97(19), may 2018.DOI
  21. [21]M. Mulazzi, A. Chainani, N. Katayama, R. Eguchi, M. Matsunami, H. Ohashi, Y. Senba, M. Nohara, M. Uchida, H. Takagi, and S. Shin. Absence of nesting in the charge-density-wave system 1T-VS₂ as seen by photoelectron spectroscopy. Physical Review B, 82(7), aug 2010.DOI
  22. [22]T. Ohtani, K. Hayashi, M. Nakahira, and H. Nozaki. Phase transition in V₁₊ₓTe₂ (0.04≤x≤0.11). Solid State Communications, 40(5):629–631, nov 1981.DOI
  23. [23]T. Ohtani, S. Onoue, and M. Nakahira. Phase relationships and properties in the V-Te system. Materials research bulletin, 19(10):1367–1375, 1984.
  24. [24]Corsin Battaglia, Hervé Cercellier, Florian Clerc, Laurent Despont, Michael Gunnar Garnier, Christian Koitzsch, Philipp Aebi, Helmut Berger, László Forró, and Claudia Ambrosch-Draxl. Fermi-surface-induced lattice distortion in NbTe₂. Physical Review B, 72(19), nov 2005.
  25. [25]Shoichi Nagata, Tsuyoshi Abe, Shuji Ebisu, Yutaka Ishihara, and Kitomi Tsutsumi. Superconductivity in the metallic layered compound NbTe₂. Journal of Physics and Chemistry of Solids, 54(8):895–899, aug 1993.DOI
  26. [26]M. H. Van Maaren and G. M. Schaeffer. Some new superconducting group Vᵃ dichalcogenides. Physics Letters A, 24(12):645–646, 1967.DOI
  27. [27]Hongxiang Chen, Zhilin Li, Liwei Guo, and Xiaolong Chen. Anisotropic magneto-transport and magnetic properties of low-temperature phase of TaTe₂. EPL (Europhysics Letters), 117(2):27009, jan 2017.DOI
  28. [28]Chen Chen, Heung-Sik Kim, Alemayehu S. Admasu, Sang-Wook Cheong, Kristjan Haule, David Vanderbilt, and Weida Wu. Trimer bonding states on the surface of the transition-metal dichalcogenide TaTe₂. Physical Review B, 98(19), nov 2018.DOI
  29. [29]Y. Liu, W. J. Lu, D. F. Shao, L. Zu, X. C. Kan, W. H. Song, and Y. P. Sun. Structural, electrical, and thermoelectric properties of distorted 1T-Ta₁₋ₓNbₓTe₂ single crystals. EPL (Europhysics Letters), 109(1):17003, jan 2015.
  30. [30]A. H. Thompson and B. G. Silbernagel. Magnetic properties of VSe₂: Inferences from the study of metal-rich V₁₊δSe₂ compounds. Journal of Applied Physics, 49(3):1477–1479, mar 1978.DOI
  31. [31]L. F. Schneemeyer and M. J. Sienko. The effect of niobium substitution on charge density wave anomalies in vanadium diselenide. Journal of the Less Common Metals, 62:343–348, nov 1978.DOI
  32. [32]A. H. Thompson and B. G. Silbernagel. Correlated magnetic and transport properties in the charge-density-wave states of VSe₂. Physical Review B, 19(7):3420–3426, apr 1979.DOI
  33. [33]Juhi Pande and Ajay Soni. Electron-phonon interactions and two-phonon modes associated with charge density wave in single crystalline 1T-VSe₂. Physical Review Research, 2(3), jul 2020.
  34. [34]T. Valla, A. V. Fedorov, P. D. Johnson, P. A. Glans, C. McGuinness, K. E. Smith, E. Y. Andrei, and H. Berger. Quasiparticle Spectra, Charge-Density Waves, Superconductivity, and Electron-Phonon Coupling in 2H- NbSe₂. Physical review letters, 92(8):086401, 2004.pubmed.ncbi.nlm.nih.gov/14995798
  35. [35]F. J. Di Salvo, J. A. Wilson, B. G. Bagley, and J. V. Waszczak. Effects of doping on charge-density waves in layer compounds. Physical Review B, 12(6):2220, 1975.
  36. [36]F. Borsa, D. R. Torgerson, and H. R. Shanks. Charge-density wave amplitudes in 2H − NbSe₂ and 2H − TaSe₂ determined by ⁷⁷Se NMR. Phys. Rev. B, 15:4576–4579, May 1977.DOI
  37. [37]T. Tsuda, H. Yasuoka, Y. Kitaoka, and F. J. Di Salvo. ⁵¹V NMR study of the phase transition in 1T-VS₂. Journal of Magnetism and Magnetic Materials, 31:1101–1102, 1983.DOI
  38. [38]Xu Sun, Tao Yao, Zhenpeng Hu, Yuqiao Guo, Qinghua Liu, Shiqiang Wei, and Changzheng Wu. In situ unravelling structural modulation across the charge-density-wave transition in vanadium disulfide. Physical Chemistry Chemical Physics, 17(20):13333–13339, 2015.DOI
  39. [39]M. Leroux, M. Le Tacon, M. Calandra, L. Cario, M.-A. Méasson, P. Diener, E. Borrissenko, A. Bosak, and P. Rodière. Anharmonic suppression of charge density waves in 2H-NbS₂. Physical Review B, 86:155125, Oct 2012.
  40. [40]Y. D. Wang, W. L. Yao, Z. M. Xin, T. T. Han, Z. G. Wang, L. Chen, C. Cai, Yuan Li, and Y. Zhang. Band insulator to Mott insulator transition in 1T-TaS₂. Nature communications, 11(1):1–7, 2020.
  41. [41]Jaydeep Joshi, Heather M. Hill, Sugata Chowdhury, Christos D. Malliakas, Francesca Tavazza, Utpal Chatterjee, Angela R. Hight Walker, and Patrick M. Vora. Short-range charge density wave order in 2H-TaS₂. Physical Review B, 99(24):245144, 2019.
  42. [42]Xiaxin Ding, Jie Xing, Gang Li, Luis Balicas, Krzysztof Gofryk, and Hai-Hu Wen. Crossover from Kondo to Fermi-liquid behavior induced by high magnetic field in 1T-VTe₂ single crystals. Physical Review B, 103(12), mar 2021.DOI
  43. [43]Sourabh Barua, M. Ciomaga Hatnean, M. R. Lees, and G. Balakrishnan. Signatures of the Kondo effect in VSe₂. Scientific Reports, 7(1), sep 2017.DOI
  44. [44]Qiang Cao, Frank F. Yun, Lina Sang, Feixiang Xiang, Guolei Liu, and Xiaolin Wang. Defect introduced paramagnetism and weak localization in two-dimensional metal VSe₂. Nanotechnology, 28(47):475703, oct 2017.DOI
  45. [45]H. N. S. Lee, M. Garcia, H. McKinzie, and A. Wold. The low-temperature electrical and magnetic properties of TaSe₂ and NbSe₂. Journal of Solid State Chemistry, 1(2):190–194, 1970.
  46. [46]Akio Furukawa, Yoshihide Kimishima, Yasukage Oda, Hiroshi Nagano, and Yoshichika Ōnuki. Magnetic behavior of 1T-TaS₂ in the Anderson localized state. Journal of the Physical Society of Japan, 54(11):4300–4305, 1985.
  47. [47]Hongtao Liu, Yunzhou Xue, Jin-An Shi, Roger A. Guzman, Panpan Zhang, Zhang Zhou, Yangu He, Ce Bian, Liangmei Wu, Ruisong Ma, Jiancun Chen, Jiahao Yan, Haitao Yang, Cheng-Min Shen, Wu Zhou, Lihong Bao, and Hong-Jun Gao. Observation of the Kondo Effect in Multilayer Single-Crystalline VTe₂ Nanoplates. Nano Letters, 19(12):8572–8580, nov 2019.DOI
  48. [48]Charles Kittel. Introduction to solid state physics. John Wiley & sons, inc, 2005.
  49. [49]H. SCHÄFER. Chemical Transport Processes as an Aid in Preparative Chemistry. Combination of Transport Reactions with Other Processes. In Chemical Transport Reactions, pages 115–131. Elsevier, 1964.DOI
  50. [50]G. A. Wiegers. Physical properties of first-row transition metal dichalcogenides and their intercalates. Physica B+C, 99(1-4):151–165, jan 1980.DOI
  51. [51]D. R. Hamann. New Solution for Exchange Scattering in Dilute Alloys. Phys. Rev., 158:570–580, Jun 1967.DOI
  52. [52]Kei Yosida. Anomalous Electrical Resistivity and Magnetoresistance Due to an s − d Interaction in Cu-Mn Alloys. Phys. Rev., 107:396–403, Jul 1957.DOI
  53. [53]Tsuyoshi Sekitani, Michio Naito, and Noboru Miura. Kondo effect in underdoped n-type superconductors. Phys. Rev. B, 67:174503, May 2003.DOI
  54. [54]K. Park, L. S. Wu, Y. Janssen, M. S. Kim, C. Marques, and M. C. Aronson. Field-tuned Fermi liquid in quantum critical YFe₂Al₁₀. Phys. Rev. B, 84:094425, Sep 2011.
  55. [55]Hui Pan. Magnetic and Electronic Evolutions of Hydrogenated VTe₂ Monolayer under Tension. Scientific Reports, 4(1), dec 2014.DOI
  56. [56]Huei-Ru Fuh, Ching-Ray Chang, Yin-Kuo Wang, Richard F. L. Evans, Roy W. Chantrell, and Horng-Tay Jeng. Newtype single-layer magnetic semiconductor in transition-metal dichalcogenides VX₂ (X = S, Se and Te). Scientific Reports, 6(1), sep 2016.DOI
  57. [57]C. J. Sayers, L. S. Farrar, S. J. Bending, M. Cattelan, A. J. H. Jones, N. A. Fox, G. Kociok-Köhn, K. Koshmak, J. Laverock, L. Pasquali, and E. Da Como. Correlation between crystal purity and the charge density wave in 1T-VSe₂. Physical Review Materials, 4(2), feb 2020.

Paper details

vlnc:W_hgm7srag
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 2

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents