betaFeedback

WorksPhysics and Astronomy

Core-corona procedure and microcanonical hadronization to understand strangeness enhancement in proton-proton and heavy ion collisions in the EPOS4 framework

Abstract

The multiplicity dependence of multistrange hadron yields in proton-proton and lead-lead collisions at several TeV allows one to study the transition from very big to very small systems, in particular, concerning collective effects. I investigate this, employing a core-corona approach based on new microcanonical hadronization procedures in the EPOS4 framework, as well as new methods allowing one to transform energy-momentum flow through freeze-out surfaces into invariant-mass elements. I try to disentangle effects due to canonical suppression'' and core-corona separation'', which will both lead to a reduction of the yields at low multiplicity.

Introduction

An enhancement of multistrange hadrons in relativistic heavy ion collisions compared with proton-proton scattering is one of the oldest signals proposed to detect the creation of a “quark-gluon plasma” [1]. It was observed first (as expected) in heavy ion collisions [2, 3, 4, 5, 6] but, unexpectedly, such “signals” have also been detected in proton-protons collisions, where the enhancement concerns high-multiplicity compared with low-multiplicity events [7]. Even more, when one plots ratios of multistrange hadrons to pions, as a function of the multiplicity dn/dηd n/d\eta at rapidity zero, for both proton-proton (at 7 TeV) and heavy ions (PbPb at 2.76 TeV), one observes a unique curve, increasing monotonically from low-multiplicity proton-proton up to central PbPb. Also shown in Ref. [7]: the standard Monte Carlo event generators do not really describe the data.

During the past five years, the EPOS4 project was developed (see first publications [8, 9, 10]), being an attempt to construct a realistic model for describing relativistic collisions of different systems (from proton-proton to nucleus-nucleus) at energies from several GeV per nucleon up to several TeV. So the model should be able to deal with strangeness enhancement, but not only. It is a “general purpose” approach that is meant to describe any observable. The results shown in this paper are only a very small fraction of simulation results, since as a first test of the new approach simulations were performed at low energies, i.e., 7.7, 11.5, 14.5, 19.6, 27, 39, 62.4, 130, and 200 GeV / nucleon, and as well at high energies, i.e., 2.76, 5.02, 7, 8, 13 TeV / nucleon, for different systems, looking for yields, spectra, and flow, for light and heavy flavor. All this is done with the same code version, namely EPOS4.0.0, which is at this moment being published via a dedicated web page. No attempt has been made to “fit” one particular curve for one particular system, the idea is more to see to what extent one understands the enormous amount of data accumulated over the past two decades.

A fundamental ingredient of the EPOS4 approach is the observation that multiple (nucleonic or partonic) scatterings must happen in parallel, and not sequentially, based on very elementary considerations concerning time-scales. To take this into account, EPOS4 brings together ancient knowledge about S-matrix theory (to deal with parallel scatterings) and modern concepts of perturbative QCD and saturation, going much beyond the usual factorization approach. The parallel scattering principle requires sophisticated Monte Carlo techniques, inspired by those used in statistical physics to investigate the Ising model.

In the EPOS4 approach, one distinguishes “primary scatterings” and “secondary scatterings”. The former refer to the above-mentioned parallel scatterings with the initial nucleons (and their partonic constituents) being involved, happening at very high energies instantaneously. The theoretical tool is S-matrix theory, using a particular form of the proton-proton scattering S-matrix (Gribov-Regge approach [11, 12, 13, 14]), which can be straightforwardly generalized to be used for nucleus-nucleus collisions. Although these basic assumptions are not only well-motivated, but also very simple and transparent, the practical application is complicated. This is due to the fact that when developing matrix elements in terms of multiple scattering diagrams, the large majority of the diagrams cancel when it comes to inclusive cross sections. But in EPOS4 one keeps all contributions since one wants to go beyond inclusive cross sections (important when studying high multiplicity events). The challenge for EPOS4 is to use the full parallel scattering scenario, but in a smart way such that for inclusive cross section the cancellations actually work. This is the new part in EPOS4, strongly based on an interplay between parallel scatterings and saturation. This is discussed in detail in separate publications [8, 9, 10]. Our S-matrix approach has a modular structure, it is based on so-called “Pomerons” (representing elementary parton-parton scatterings), and these Pomerons are constructed based on “parton ladders”, which makes the link to perturbative QCD. Also, this part has been completely redone, with particular care concerning the role of heavy flavor [9].

In this paper, I want to focus on the secondary scatterings, and in particular on the hadronization of “plasma droplets”. In Sec. · II, I summarize briefly the “parallel scattering approach” for primary scatterings. In Sec. · III, I discuss how the EPOS4 multiple-scattering diagrams translate into particle production, which means first the production of so-called prehadrons, which may originate from Pomerons or from remnants. Based one these prehadrons, a core-corona procedure will be employed, which allows one to identify the “core”, which will then be treated as a fluid which evolves and eventually decays into hadrons. In Sec. IV, I discuss the main topic of this paper, namely the hadronization of the core.

Parallel Scattering Scenario in EPOS4

Let me briefly summarize the EPOS4 approach, considering first high-energy collisions, where a parallel scattering approach for primary scatterings is mandatory, in AA collisions but also concerning multiple partonic scatterings in pp reactions. In Refs. [8, 9, 10], it is shown in detail how such a “parallel scattering scheme” can be constructed rigorously based on S-matrix theory, which will be sketched in the following.

The starting point is the elastic-scattering T-matrix TT for pp scattering, expressed as a product of “elementary” T-matrices TPomT_{\mathrm{Pom}} representing parton-parton scattering via Pomeron exchange. The expression can be easily generalized for AA scattering. In both cases, pp or AA, this formalism allows a strict parallel scattering picture. The precise content of the Pomerons will be discussed later. The connection with inelastic scattering provides the optical theorem, using so-called cutting rules, which allows one to express the total cross section (which by definition adds up all inelastic processes) in terms “cut Pomerons” GG, as shown for the case of two inelastic scatterings in Figure 1. The

Figure 1. Double scattering, each box representing a cut Pomeron GG (single inelastic scattering).

light-cone momentum fractions x+x^{+} and x−x^{-} are shared between the two Pomerons and the remnants (WW in the plot represents some vertex function). Each cut Pomeron GG represents a squared amplitude of a single inelastic scattering.

The important new issue in Ref. [8, 9, 10] is the understanding of how energy conservation ruins factorization (which strictly speaking makes the model inapplicable), and how to solve the problem via an appropriate definition of GG. The cut Pomeron, representing a single inelastic scattering is the fundamental quantity in the EPOS formalism. For the moment, one considers the Pomeron as a “box” (the precise internal structure will be discussed later), with two external legs representing two incoming partons carrying light-cone momentum fractions x+x^{+} and x−x^{-}, so G=G(x+,x−,s,b)G=G(x^{+},x^{-},s,b), with the energy squared ss, and the impact parameter bb, see Figure 2.

The cut Pomeron G

Figure 2. The cut Pomeron GG.

Let me define the “Pomeron energy fraction” xPE=x+x−=MPom2/sx_{\mathrm{PE}}=x^{+}x^{-}=M_{\mathrm{Pom}}^{2}/s, with MPomM_{\mathrm{Pom}} being the transverse mass of the Pomeron, which is the crucial variable characterizing cut Pomerons: the bigger xPEx_{\mathrm{PE}}, the bigger the Pomeron’s invariant mass and the number of produced particles. Large invariant masses also favor high-pTp_{\mathrm{T}} jet production.

Let me consider a AA collision (including pp as a special case). I define, for a given cut Pomeron connected to projectile nucleon ii and target nucleon jj, a “connection number” Nconn=(NP+NT)/2N_{\mathrm{conn}}=(N_{\mathrm{P}}+N_{\mathrm{T}})/2, with NPN_{\mathrm{P}} being the number of Pomerons connected to ii, and with NTN_{\mathrm{T}} being the number of Pomerons connected to jj. The case Nconn=1N_{\mathrm{conn}}=1 corresponds to an isolated Pomeron, which may take all the energy of the initial nucleons, whereas in case Nconn>1N_{\mathrm{conn}}>1 the energy will be shared. To quantify the effect of the energy sharing, one defines f(Nconn)(xPE)f^{(N_{\mathrm{conn}})}(x_{\mathrm{PE}}) to be the inclusive xPEx_{\mathrm{PE}} distribution, i.e. the probability that a single Pomeron carries an energy fraction xPEx_{\mathrm{PE}}, for Pomerons with given values of NconnN_{\mathrm{conn}}. The main problem which ruins factorization is the fact that the distribution for Nconn>1N_{\mathrm{conn}}>1 will be deformed with respect to the Nconn=1N_{\mathrm{conn}}=1 case, due to energy sharing. I define the corresponding “deformation function” Rdeform(xPE)R_{\mathrm{deform}}(x_{\mathrm{PE}}) as a ratio of f(Nconn)(xPE)f^{(N_{\mathrm{conn}})}(x_{\mathrm{PE}}) over f(1)(xPE)f^{(1)}(x_{\mathrm{PE}}). I also use the notation Rdeform(xPE)R_{\mathrm{deform}}(x_{\mathrm{PE}}) to underline its NconnN_{\mathrm{conn}} dependence. As shown in Refs. [8, 10], this function can be calculated and tabulated. As discussed in very much detail in Ref. [9], one also calculates and tabulates some function GQCD(Q2,x+,x−,s,b)G_{\mathrm{QCD}}(Q^{2},x^{+},x^{-},s,b), which contains as a basic element a cut parton ladder based on Dokshitzer-Gribov-Lipatov-Altarelli-Parisi (DGLAP) parton evolutions [13, 15, 16] from the projectile and target side, with an elementary QCD cross section in the middle, Q2Q^{2} being the low virtuality cutoff in the DGLAP evolution. The latter is usually taken to be constant and of the order of 1 GeV, whereas here one allows any value. With all this preparation, one is now able to connect GG (used in the multi-Pomeron diagrams) and GQCDG_{\mathrm{QCD}} [which contains all the perturbative QCD (pQCD) diagrams], as follows: For each cut Pomeron, for given x±x^{\pm}, ss, bb, and NconnN_{\mathrm{conn}}, one postulates:

G(x+,x−,s,b)=nRdeform(Nconn)(xPE)GQCD(Qsat2,x+,x−,s,b),(1)G(x^{+},x^{-},s,b)=\frac{n}{R_{\mathrm{deform}}^{(N_{\mathrm{conn}})}(x_{\mathrm{PE}})}G_{\mathrm{QCD}}(Q_{\mathrm{sat}}^{2},x^{+},x^{-},s,b), \tag*{(1)}

with

G independent of Nconn.(2)G\ \text{independent of } N_{\mathrm{conn}}. \tag*{(2)}

But Qsat2Q_{\mathrm{sat}}^{2} does depend on NconnN_{\mathrm{conn}} (and also on x±x^{\pm}). The symbol nn is a factor not depending on x±x^{\pm}. This is the fundamental equation in the new EPOS4 approach. As shown in Refs. [8, 10], this deformation in the denominator of Eq. (1) corrects perfectly the deformation of the xPEx_{\mathrm{PE}} distribution, the only effect of energy sharing is a modification of Qsat2Q_{\mathrm{sat}}^{2}, and the latter will only affect low-ptp_{\mathrm{t}} processes. In this way, one recovers factorization, and binary scaling in AA (with RAA=1R_{\mathrm{AA}} = 1) at large transverse momenta for inclusive cross sections (but only for them). In other words, at large ptp_{\mathrm{t}}, the full multiple-scattering machinery produces exactly the same result as compared with simply taking one single Pomeron (single scattering), which allows one to define and compute (in the EPOS framework) parton distribution function, tabulate them, and then compute inclusive jet cross sections based on these (using standard procedures).

But such a “shortcut” (also referred to as “EPOS4 factorization mode”) is only possible for inclusive cross sections, and only at high ptp_{\mathrm{t}}. But this represents only a very small fraction of all possible applications, and there are very interesting cases outside the applicability of that approach. A prominent example, one of the highlights of the past decade in our domain, concerns collective phenomena in small systems. It has been shown that high-multiplicity pp events show very similar collective features as earlier observed in heavy ion collisions [17]. High multiplicity means automatically “multiple parton scattering”. As discussed earlier, this means that one has to employ the full parallel scattering machinery developed earlier, based on S-matrix theory. One cannot use the usual parton distribution functions (representing the partonic structure of a fast nucleon), one has to treat the different scatterings (happening in parallel) individually, and for each scattering, one has a parton evolution according to some evolution function EE (representing the partonic structure of a fast parton), as sketched in Figure 3. One still has DGLAP evolution,

Figure 3. Rigorous parallel scattering scenario, for n=3n = 3 parallel scatterings, including non-linear effects via saturation scales. The red symbols should remind one that the parts of the diagram representing nonlinear effects are replaced by simply using saturation scales.

for each of the scatterings, but one introduces saturation scales. But, most importantly, these scales are not constants, they depend on the number of scatterings, and they depend as well on x+x^{+} and x−x^{-}. An example of a multiple-scattering AA configuration is shown in Figure 4. The diagrams shown in Figure 3 and Figure 4 are meant to be “symbolic”, the real structure is somewhat more complex. Also for simplicity, one consider only gluons in the diagrams. I also do not consider (for simplicity) timelike parton emissions, but in the real EPOS4 simulations they are of course taken care of, based on angular ordering. For a complete description, see Ref. [9].

Figure 4. Rigorous parallel scattering scenario, for n=3n = 3 parallel scatterings for a collision of a nucleus AA with a nucleus BB, including non-linear effects via saturation scales.

But all this “multiple-scattering discussion” is not the full story. The S-matrix part concerns “primary scatterings”, happening instantaneously at t=0t = 0. As a result, in the case of a large number of Pomerons, one has correspondingly a large number of “prehad rons”, and based on these, “secondary interactions” occur: fluid formation and decay and hadronic rescatterings. This will be discussed in the next section.

The Role of Core, Corona, and Remnants

In this section, I will discuss briefly how the EPOS4 multiple scattering diagrams translate into particle production, which means first the production of so-called prehadrons. As discussed below, our Pomerons are mapped into kinky relativistic strings, where string decay traditionally produces string segments which correspond to hadrons. But one considers the possibility of having a dense environment, and here the string segments cannot “evolve” into hadrons. So one uses the term “prehadrons” for these segments, and they either “fuse” to produce the core, or become hadrons if they escape the core. A similar argument is used for excited remnants, which may decay into hadrons, but again this may happen in a dense area. In Ref. [9], one discusses the different types of Pomerons and their relation with PQCD, including technical details for the computations, and one also discusses how the PQCD diagrams translate into kinky strings. String decay into segments (now called prehadrons) is discussed in detail in Ref. [18]. Based on these prehadrons, a core-corona procedure will be employed, which allows identifying the “core”, which will then be treated as a fluid that evolves and eventually decays into hadrons, which still may collide with each other.

In Figure 5, I consider an example of a multiple cut Pomeron (i.e. multiple scattering) configuration of two colliding nuclei AA and BB at Large Hadron Collider (LHC) energies (several TeV), each nucleus composed of two nucleons (just for illustration). Dark blue lines mark active quarks, red dashed lines active antiquarks, and light blue thick lines projectile and target remnants (nucleons minus the active (anti)quarks). I have chosen an example with two scatterings of “sea-sea” type, and one of “val-sea” type (see Ref. [9]). One considers each incident nucleon as a reservoir of three valence quarks plus quark-antiquark pairs. The “objects” which represent the “external legs” of the individual scatterings are colorless: quark-antiquark pairs in most cases as shown in the figure, but one may as well have quark-diquark pairs or even antiquark-antidiquark pairs – in any case, a 33 and a 3ˉ\bar{3} color representation. In general, each of the horizontal gluon lines would develop the so-called timelike cascade, which is not

Figure 5. Multiple scattering configuration of two colliding nuclei A and B at LHC energies, each nucleus being composed of two nucleons, with three scatterings (from three cut Pomerons). Dark blue lines mark active quarks, red dashed lines active antiquarks, and light blue thick lines projectile and target remnants. One of the target nucleons is just a spectator.

considered here for the simplicity of the discussion. I also consider only gluons here, in general, there are as well g→q+qˉg \rightarrow q+\bar{q} splittings. This multiple-scattering picture works perfectly also at lower energies [BNL Relativistic Heavy Ion Collider (RHIC)]. With decreasing energy, it becomes simply more and more likely that the Pomerons in Figure 5 are replaced by purely soft ones, as indicated in Figure 6. Also the Pomerons get less energetic, producing fewer particles.

Lower-energy multiple scattering configuration

Figure 6. As Figure 5, but for lower energy.

For a given diagram as for example Figure 5, one constructs the corresponding color flow diagram (two arrows per gluon, forward and backward arrows for quarks and antiquarks). One then follows the color flow arrows, for example starting with a 33 being an

external leg on the projectile side, until one finds a 33 which is in our example an external leg on the target side. This defines a chain of partons. Assuming that the external legs are simply quarks and antiquarks, one gets six chains of the type qˉ−g−g−…−g−q\bar{q}-g-g-\ldots-g-q, mapped (in a unique fashion) to kinky strings, where each parton corresponds to a kink. This is explained in detail in Ref. [9]. The kinky strings are then decayed into prehadrons.

A second source of particle production are the remnants. In case of multiple scattering as in Figure 5, the projectile and target remnants remain colorless, but they may change their flavor content during the multiple collisions. The quark-antiquark pair “taken out” for a collision (the “external legs” for the individual collisions), may be uu-sˉ\bar{s}, then the remnant for an incident proton has flavor udsuds. In addition, the remnants get massive, much more than a simply resonance excitation. One may have remnants with masses of 10 GeV/c210\,\mathrm{GeV}/c^2 or more, which contribute significantly to particle production (at large rapidities).

In the above discussion, I mentioned the production of “prehadrons” from strings and from remnant decays. Based on these prehadrons, one employs a so-called core-corona procedure (introduced in Ref. [19], updated in Ref. [20]), at some given (early) proper-time τ0\tau_0, see Figure 7. The method is used for all systems, big ones (as

Sketch of the core-corona separation for a big and a small system

Figure 7. Sketch of the core-corona separation for a “big” (a) and a “small” (b) system. The dots are prehadrons in the transverse plane, red refers to core, blue to corona.

central AA) or small ones (peripheral AA, or even pp scattering). One considers all prehadrons at τ0\tau_0, marked as dots in Figure 7. For each prehadron, one computes

ptnew=pt−0.25(fEL1+Z(fEL2−fEL1))ptgEL∫γρhEL dL(3)p_t^{\mathrm{new}} = p_t - 0.25\left(f_{\mathrm{EL1}}+Z(f_{\mathrm{EL2}}-f_{\mathrm{EL1}})\right)p_t^{g_{\mathrm{EL}}}\int_{\gamma}\rho^{h_{\mathrm{EL}}}\,\mathrm{d}L \tag*{(3)}

References

  1. [1]P. Koch, B. Muller, and J. Rafelski, Phys. Rept. 142, 167 (1986).
  2. [2]WA97, E. A. et al., Phys. Lett. B449, 401 (1999).
  3. [3]NA49, S. V. A. et al., Phys. Lett. B538, 275 (2002), arXiv:hep-ex/0202037.
  4. [4]NA57, F. A. et al., Phys. Lett. B595, 68 (2004), arXiv:nucl-ex/0403022.
  5. [5]STAR Collaboration, B. I. Abelev et al., Phys. Rev. C77, 044908 (2008), arXiv:0705.2511.
  6. [6]ALICE, B. B. Abelev et al., Phys. Lett. B 728, 216 (2014), 1307.5543, [Erratum: Phys.Lett.B 734, 409–410 (2014)].
  7. [7]ALICE, J. Adam et al., Nature Phys. 13, 535 (2017), 1606.07424.
  8. [8]K. Werner, Phys. Rev. C 108, 064903 (2023), arXiv:2301.12517.arxiv.org/abs/2301.12517
  9. [9]K. Werner and B. Guiot, Phys. Rev. C 108, 034904 (2023), arXiv:2306.02396.arxiv.org/abs/2306.02396
  10. [10]K. Werner, (2023), arXiv:2310.09380.arxiv.org/abs/2310.09380
  11. [11]V. N. Gribov, Zh. Eksp. Teor. Fiz. 53, 654 (1967).
  12. [12]V. N. Gribov, Sov. Phys. JETP 29, 483 (1969).
  13. [13]V. N. Gribov and L. N. Lipatov, Sov. J. Nucl. Phys. 15, 438 (1972).
  14. [14]V. A. Abramovsky, V. N. Gribov, and O. V. Kancheli, Yad. Fiz. 18, 595 (1973).
  15. [15]G. Altarelli and G. Parisi, Nuclear Physics B. 126, 298 (1977).
  16. [16]Y. L. Dokshitzer, Sov. Phys. JETP 46, 641 (1977).
  17. [17]CMS, V. N. Khachatryan et al., JHEP 09, 091 (2010), 1009.4122.
  18. [18]H. J. Drescher, M. Hladik, S. Ostapchenko, T. Pierog, and K. Werner, Phys. Rept. 350, 93 (2001), hep-ph/0007198.
  19. [19]K. Werner, Phys. Rev. Lett. 98, 152301 (2007), 0704.1270.
  20. [20]K. Werner, B. Guiot, I. Karpenko, and T. Pierog, Phys. Rev. C 89, 064903 (2014), 1312.1233.
  21. [23]Y. Kanakubo, Y. Tachibana, and T. Hirano, Phys. Rev. C 105, 024905 (2022), 2108.07943.
  22. [24]I. Karpenko, P. Huovinen, and M. Bleicher, Computer Physics Communications 185, 3016 (2014), arXiv:1312.4160.DOI
  23. [25]K. Werner, I. Karpenko, T. Pierog, M. Bleicher, and K. Mikhailov, Physical Review C 83 (2011), arXiv:1010.0400.DOI
  24. [26]F. Becattini and L. Ferroni, The European Physical Journal C 35, 243 (2004).
  25. [27]F. Cerulus and R. Hagedorn, Sup. Nuovo. Cim. IX, X, 646 (1958).
  26. [28]F. James, CERN report CERN-68-15 (1968).
  27. [29]Klaus Werner, Jorg Aichelin, Phys.Rev.C 52, 1584 (1995).
  28. [30]C. Bignamini, F. Becattini, and F. Piccinini, The European Physical Journal C 72 (2012).
  29. [31]D. Oliinychenko and V. Koch, Phys. Rev. Lett. 123, 182302 (2019), 1902.09775.
  30. [32]D. Oliinychenko, S. Shhi, and V. Koch, Phys. Rev. C 102, 034904 (2020), 2001.08176.
  31. [33]ALICE, B. Abelev et al., Phys. Rev. C 88, 044910 (2013), 1303.0737.
  32. [34]ALICE, B. Abelev et al., Phys. Rev. Lett. 111, 222301 (2013), 1307.5530.
  33. [35]ALICE, J. Adam et al., Eur. Phys. J. C 75, 226 (2015), 1504.00024.
  34. [36]Anton Andronic, private communication.
  35. [37]S. A. Bass et al., Prog. Part. Nucl. Phys. 41, 225 (1998), nucl-th/9803035.
  36. [38]M. Bleicher et al., J. Phys. G25, 1859 (1999), hep-ph/9909407.
  37. [39]ALICE, J. Adam et al., JHEP 09, 148 (2015), 1505.00664.
  38. [40]N. Metropolis and S. Ulam, Journal of the American Statistical Association 44 No 247, 335 (1949).
  39. [41]N. Metropolis, A.W. Rosenbluth, M.N. Rosenbluth, A.H. Teller, and E. Teller, Journal of Chemical Physics 21 No 6, 1087 (1953).
  40. [42]W.K. Hastings, Biometrika 57, 97 (1970).

Paper details

vlnc:W_hnkjtuf4
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents