WorksPhysics and Astronomy
Shell-model study for GT-strengths corresponding to decay of Ge and Ge
Abstract
In the present work, we have reported a comprehensive shell-model study of GT-strengths for recently available experimental data for Ga and Ga from RIKEN Nishina Center [Phys. Rev. C 103, 014324 (2021)] populated by decay of the Ge and Ge, respectively. We have performed shell-model calculations in two different model spaces, the first set of calculations in the model space using KB3G and GXPF1A interactions, while the second set in model space using JUN45 and jj44b effective interactions. Our shell-model results in model space are in a reasonable agreement with the available experimental data.
Introduction
The study of nuclei away from the stability line is one of the major goals in nuclear physics [1, 2, 3]. It is possible to extract several useful information about nuclear structure using the study of Gamow-Teller (GT) transition strengths. The GT-transition is the weak interaction process of spin-isospin () type in nuclei [4]. The study of GT-strengths is also important for the astrophysics process, and it is responsible for electron capture during the core collapse of supernovae. The experimental B(GT) strengths can be obtained using -decay and charge-exchange (CE) reactions. One can only access the states lower than the decay -value in the -decay, while it is possible to measure GT-transitions at higher energies using CE reactions such as , , , or . A recent review of the experimental and theoretical status on the single and double beta decays is available in [5].
There are several recent experimental data of GT-strengths available for the shell nuclei. The observation of the -delayed -proton decay of and its impact on the Gamow-Teller strength evaluation is reported in Ref. [6]. Also, they observed evidence for fragmentation of the isobaric analogue state (IAS) in due to isospin mixing. The results of the decay of three proton-rich nuclei with , namely , , and were reported in [7]. The beta decay results of nuclei , , , and produced in fragmentation reactions at GSI are reported in Ref. [8], further, these results are compared with the charge exchange reaction results corresponding to to performed at RCNP-Osaka. Adachi et al. were performed a high-energy-resolution (, t) CE reaction experiment on nuclei and for the study of GT transition strengths to the daughter nuclei and , respectively [9, 10].
Apart from the above, several other experiments have been carried out to investigate the GT strength for the decay of , some are direct decay measurements while others are nuclear reactions based. The decay of was measured at NSCL, MSU, and found with a 100% branching fraction and half-life ms [11]. Another experiment was performed to study the decay of at GANIL and determined the half-life (129 35) ms [12]. The decay properties of the nucleus were measurement for the first time in [13] by using the fusion-evaporation reaction . The study of the GT strength for the decay of the , ground state of into the different excited states of the odd-odd nucleus is given in [14]. In this work, they have measured total six excited states of , below 2.5 MeV through decay. In Ref. [15], they have measured total 16 decay transitions of neutron-deficient nuclei ranging from chromium to germanium with and . The rotational structure of and bands in the nucleus using shell model and cranked Nilsson-Strutinsky model is studied in [16]. The spectroscopy of the nucleus is studied for the high-spin states using the shell-model and deformed shell-model given in Ref. [17]. The role of neutron-proton pairing and its impact on GT-transitions for nuclei is reported by Pittel et al. in Ref. [18]. In Ref. [18], it was observed that the varying strength parameters for the isoscalar and isovector showed different but systematic effects on GT-transition properties and also on the corresponding energy spectra.
Recently, an experiment has been performed at RIKEN in which they have populated several new excited states and -feeding branching fractions corresponding to these states of [19]. In this experiment decay schemes, absolute Gamow-Teller and Fermi transition strengths have been determined for the decay of . Also, they have improved the precision in the half-lives of [73.5(1) ms], [25.0(3) ms] and [69.4(2) ms] from the literature [11, 15, 13, 14]. New information has been reported for the energy levels of and on the a first excited state in . Also, evidences of populations of levels in four nuclei , , , and in the decay chain of are reported. These new experimental data for the decay of motivated us to perform the shell-model calculations for the GT-strengths and analyze the nuclear structure.
In the present work, our aim is to explain the recently available experimental data [19] for the Gamow-Teller transition strengths corresponding to and transitions in the framework of the nuclear shell-model. We have used two different model spaces such as and , using GXPF1A and KB3G interactions for shell and JUN45 and jj44b for shell, respectively. First, we have calculated the energy spectra for low-lying states in order to test the predictive power of our computed wave functions and found the energy spectra are in good agreement with the available experimental data. After that, we have used those wavefunctions to compute GT-strengths.
This paper is organized as follows. In Sec. 2, we give a short overview of GT-formalism. Results and discussions about energy spectra and the GT-strengths are presented in Sec. 3. Finally, in Sec. 4 the summary and conclusions are discussed.
Theoretical Formalism
In the present work, we have performed theoretical calculations using the nuclear shell-model. The Hamiltonian contains single-particle energy and a two-body matrix elements (TBMEs). The shell-model Hamiltonian can be written as
where is a single-particle state and the corresponding single-particle energy is . and are the creation and annihilation operators, respectively. are the antisymmetrized TBMEs.
The Gamow-Teller transition strength is calculated using the following expression,
where , , the index runs over the single-particle orbitals, and describe the states of the parent and daughter nuclei, respectively. The is the quenching factor.
In the beta decay, the value corresponding to transition from the initial state of the parent nucleus to the final state in the daughter nucleus is expressed as
where B(GT) is the Gamow-Teller transition strength, is the free-nucleon value of the axial-vector coupling constants and is the axial-vector phase space factor that contains the lepton kinematics. We have calculated the phase space factor using the parameters given by Wilkinson and Macefield [20] together with the correction factors given in Refs. [21, 22].
The total half-life is related to the partial half-life as
where runs over all the possible daughter states that are populated through transitions.
We have also computed the values in this work, which can be defined as
where is the nuclear binding energy of the interaction of the valence particles among themselves calculated using shell-model, the valence space Coulomb energy is given by [23], and subscripts and denote the parent and daughter nuclei, respectively.
A comprehensive study of GT-strengths for and shell nuclei is reported in Refs. [24, 25]. In our previous work, we have reported GT-strengths for and shell nuclei in Refs. [26, 27, 28, 29, 30, 31, 32]. The shell-model results for high-spin states and band terminations in we have recently reported in Ref. [33] using JUN45 and jj44b effective interactions.
Results and Discussions
Adopted model space and Hamiltonian
In this work, we have performed shell-model calculations for two different model spaces i.e. in and spaces. In model space, we have used two different effective interactions JUN45 [34] and jj44b [35], while in model space used KB3G [36] and GXPF1A [37] effective interactions. The is taken as the inert core with the spherical orbits , , , and in model space, while in space, the is taken as inert core with the spherical orbits , , , and .
The JUN45 interaction is established from Bonn-C potential, further, the single-particle energies and two-body matrix elements of JUN45 interaction were modified empirically in the mass region . The jj44b interaction was fitted with 600 experimental binding energies and excitation energies from nuclei with and . The 30 linear combinations of coupled two-body matrix elements (TBME) are varied and giving the rms deviation of about 250 keV from the experiment.
The KB3G interaction is based on KB3 [38], the mass dependence and original monopole changes employed into KB3 to get a new version KB3G. The idea behind this was to treat properly the shell closure and its surroundings.
The modified GXPF1 [39] interaction is referred to as GXPF1A interaction, GXPF1 is derived from the Bonn-C potential. Further, the 70 well-determined linear combinations of 4 single-particle energies and 195 two-body matrix elements are modified by iterative fitting calculations to about 700 experimental energy data out of 87 nuclei. The shell-model interactions which we have taken in the present study are isospin symmetric, thus they will give the same results for mirror nuclei.
Further, to see the importance of lower orbit, we have also reported the shell-model results in valence space corresponding two different effective interactions KB3G and GXPF1A. Due to the huge dimensions of the energy matrix, we have imposed truncation to protons/neutrons in space. For the case of decay of , we have fixed the minimum six protons in the orbital while in the case of we have fixed minimum six protons/neutrons and two in and orbitals, respectively. We did not impose any truncation on nucleons for shell-model calculations in model space. The shell-model calculations are performed using the code NuShellX@MSU [40] and KShell [41]. The energy spectra corresponding to and are shown in Figure 1 and Figure 2, respectively.
Figure 1. Comparison of energy levels between calculated and experimental data for .
Figure 2. Comparison of energy levels between calculated and experimental data for .
For the further calculations of the and summed values, we have used the quenching factors in axial-vector coupling constants from our previous work [28], these values are q = for JUN45 and jj44b, while q = , for KB3G and GXPF1A interactions.
In Table 1, we have reported the number of GT transitions up to the excitation energy in MeV corresponding to experimental data and theoretical results. In Table 2, we have reported a comparison of the theoretical -decay half-lives with the experimental data for the concerned transitions. For the calculations of half-lives, we have used the experimental -values [19]. We have also calculated values from the shell-model, and corresponding results are presented in this Table. The comparison of the theoretical excitation energies with the experimental data for the concerned transitions together with the quenched GT strengths is reported in Table 3.
Present table shows initial and final nuclei, the number of GT transitions, transitions up to the excitation energy in MeV and the references are given in the last column for comparison with the theoretical results.
Table 1. Present table shows initial and final nuclei, the number of GT transitions, transitions up to the excitation energy in MeV and the references are given in the last column for comparison with the theoretical results.
Comparison of the theoretical Q values and -decay half-lives with the experimental data for the concerned transitions.
| Process | Q (MeV) | Half-life (ms) | ||||||||
| Expt. | JUN45 | jj44b | KB3G | GXPF1A | EXPT. | JUN45 | jj44b | KB3G | GXPF1A | |
| 12.338(27) | 14.904 | 14.396 | 12.907 | 14.220 | 25.0(3) | 28.2 | 23.5 | 42.7 | 87.9 | |
| 10.839 | 10.839 | 11.072 | 11.074 | 73.5(1) | 117.8 | 112.1 | 417.9 | 576.0 |
Table 2. Comparison of the theoretical Q values and -decay half-lives with the experimental data for the concerned transitions.
| EXPT. | JUN45 | jj44b | KB3G | GXPF1A | EXPT. | JUN45 | jj44b | KB3G | GXPF1A | Ref. | ||
| 0.837 | 0.476 | 0.229 | 0.000 | 0.321 | 0.11(3) | 0.0053 | 0.0087 | 0.0265 | 0.0636 | [19] | ||
| 0.910 | 0.549 | 0.684 | 0.517 | 0.700 | 0.044(6) | 0.2830 | 0.0836 | 0.5423 | 0.0010 | |||
| 1.166 | 0.971 | 0.878 | 0.850 | 1.107 | 0.074(9) | 0.3512 | 1.1962 | 0.0066 | 0.2339 | |||
| 1.450 | 1.975 | 1.392 | 1.102 | 1.417 | 0.11(1) | 1.3280 | 0.2629 | 0.1153 | 0.1413 | |||
| 1.774 | 2.811 | 2.031 | 1.594 | 2.160 | 0.11(1) | 0.0029 | 0.3826 | 0.2024 | 0.0013 | |||
| 3.071 | 3.130 | 2.102 | 1.744 | 2.376 | 0.18(2) | 0.0026 | 0.0024 | 0.1894 | 0.1767 | |||
| 3.580 | 3.382 | 2.723 | 1.961 | 2.554 | 0.14(1) | 0.5885 | 0.5417 | 0.0048 | 0.0685 | |||
| 0.571 | 0.000 | 0.147 | 0.248 | 0.000 | 0.068(6) | 0.0290 | 0.1904 | 0.0000 | 0.0000 | [19] | ||
| 0.978 | 0.480 | 0.510 | 1.135 | 1.310 | 0.047(4) | 1.0806 | 0.3730 | 0.3777 | 0.3631 | |||
| 1.017 | 0.844 | 0.756 | 1.681 | 1.826 | 0.067(6) | 0.0429 | 0.6114 | 0.1174 | 0.0000 | |||
| 1.117 | 1.448 | 1.357 | 1.781 | 2.857 | 0.011(2) | 0.0466 | 0.2142 | 0.0017 | 0.0541 | |||
| 1.360 | 2.031 | 1.479 | 2.255 | 3.252 | 0.022(2) | 0.0053 | 0.0086 | 0.0024 | 0.0060 | |||
| 1.899 | 2.146 | 2.397 | 2.366 | 3.429 | 0.025(3) | 0.0183 | 0.0098 | 0.0043 | 0.0809 | |||
| 2.011 | 2.617 | 2.476 | 2.759 | 3.523 | 0.045(5) | 0.0032 | 0.0168 | 0.0859 | 0.0213 | |||
| 2.164 | 2.981 | 2.502 | 2.939 | 3.757 | 0.13(1) | 0.0027 | 0.0036 | 0.0054 | 0.0067 | |||
| 2.642 | 3.164 | 2.782 | 2.999 | 4.063 | 0.029(7) | 0.0037 | 0.0058 | 0.0080 | 0.0027 | |||
| 2.967 | 3.504 | 2.826 | 3.041 | 4.174 | 0.028(5) | 0.0133 | 0.0070 | 0.0009 | 0.0017 | |||
| 3.340 | 3.554 | 3.254 | 3.193 | 4.360 | 0.030(7) | 0.0001 | 0.0051 | 0.0166 | 0.0000 | |||
| 3.595 | 3.698 | 34.00 | 3.364 | 4.469 | 0.070(1) | 0.0732 | 0.0012 | 0.0004 | 0.0000 |
Table 3. Comparison of the theoretical excitation energies with the experimental data for the concerned transitions together with the quenched GT strengths.
In the next section the theoretical results corresponding to and transitions are compared with the experimental data as reported in Ref. [19].
GT-strengths corresponding to transitions
Figure 3 displays a comparison between the shell-model calculations and the experimental GT strength distribution for the transition . Figure 3(a) presents the experimental data observed through the -decay up to the excitation energy MeV [19]. Figure 3(b) depicts the shell-model calculation using the JUN45 interaction, Figure 3(c), the shell-model calculation using the jj44b interaction, Figure 3(d), the shell-model calculation using the KB3G interaction, Figure 3(e), the shell-model calculation using the GXPF1A interaction, Figure 3(f), the running sums of B(GT) as a function of the excitation energy.
Figure 3. Comparison of GT-strengths between theory and experiment for transitions.
The seven experimental GT transitions are observed corresponding to transitions at 0.837, 0.910, 1.166, 1.450, 1.774, 3.071, and 3.580 MeV. The calculated GT strengths using JUN45 and jj44b interactions in space are comparatively larger than model space as well as experimental ones. It is noticed that the effective interactions JUN45 and jj44b generated excitation energy closer to the experimental one than the energy obtained employing the KB3G and GXPF1A interactions, while the opposite is true for the GT strength. The KB3G effective interaction predicts as a ground state and as a first excited state which is 204 keV higher than , while the order of the energy levels using GXPF1A interaction is exactly matching with the experiment. The calculated energy levels in the shell-model
using KB3G and GXPF1A interactions are compressed as compared to the experimental ones this is because of the truncation imposed while filling the protons/neutrons in the model space, the truncation was necessary due to the computational limitations. Both the calculated GT strengths using KB3G and GXPF1A interactions in space are closer to experiments than the calculated results using JUN45 and jj44b interactions in space. This indicates that the orbital plays an important role in the calculations of B(GT) strengths for the transition. The close similarity in the B(GT) strength predicted using the GXPF1A interaction is visible in the summed strength plot.
GT-strengths corresponding to Ge() Ga() transitions
The comparison between the shell-model calculations and the experimental GT strength distribution for the Ge Ga transition are displayed in Figure 4. Figure 4(a) presents the experimental data observed through the -decay of GeGa up to the excitation energy MeV [19]. Figure 4(b) depicts the shell-model calculation using the JUN45 interaction, Figure 4(c), the shell-model calculation using the jj44b interaction, Figure 4(d), the shell-model calculation using the KB3G interaction, Figure 4(e), the shell-model calculation using the GXPF1A interaction, Figure 4(f), the running sums of B(GT) as a function of the excitation energy.
Figure 4. Comparison of GT-strengths between theory and experiment for Ge() Ga() transitions.
The twelve GT strengths are observed corresponding to the Ge Ga transitions between 0.571 - 3.595 MeV. At lower excitation energies, the JUN45 and jj44b effective interactions reported larger B(GT) values than the experimental data, while beyond MeV the calculated results are closer to the experimental data. Similar to the transition, the KB3G and GXPF1A interactions generated GT strengths closer to the experimental one than the GT strengths obtained employing the JUN45 and jj44b interactions, while the opposite is true for the excitation energy. The JUN45 and GXPF1A interactions are predicting as a ground state and as a first excited state. The difference between these two states is 5 and 352 keV in JUN45 and GXPF1A interactions, respectively. The truncated energy levels using KB3G interaction are better than GXPF1A interaction, while the overall GT strengths and summed B(GT) using GXPF1A interaction are better than KB3G interaction. The GT strengths from shell-model in model space are closer to the experimental data which reflects the importance of orbital. The sum of the B(GT) strength predicted by KB3G and GXPF1A interactions are similar to the experimental data as shown in Figure 4(f). The predicted half-lives using GXPF1A for and are very large.
Different orbitals contribution to GT strengths
In the Tables 4-5, the contributions from the different orbitals in the total M(GT)-strengths corresponding to for KB3G and GXPF1A are shown. For GXPF1A, the lowest state predicted at 0.321 MeV, we see that the matrix elements of the configurations , and are in the phase. In the case of KB3G interaction for the lowest state (see table 5), the contribution from , , , and are in the phase. It is clear that the role of orbital is important, it is contributing significantly to the total M(GT)-strengths. In Figure 5, we have shown a comparison of GT-strength contribution from different orbitals between GXPF1A and KB3G for transition.
Figure 5. Comparison of GT-strength contribution from different orbitals between GXPF1A and KB3G for transition.
Summary and Conclusions
In the present work, we have performed shell-model calculations for GT-strengths corresponding to recently available experimental data for and transitions. To know the importance of and orbitals we have performed calculations in two different model spaces. For model space we have used KB3G and GXPF1A interactions, while for model space we have used JUN45 and jj44b effective interactions. The calculated results are in a reasonable agreement with the model space. To show the importance of different orbitals, we have also shown a contribution of dif-
Table 4. Results of the -shell SM calculation using the GXPF1A interaction. The matrix elements M(GT) of GT transitions corresponding to transitions are shown for each configuration. The results are shown for all excited GT states predicted in the region up to 2.554 MeV. The notation f7 → f7 stands for the transition with the type. The summed value of the matrix elements is denoted by M(GT) and its squared value is the B(GT). In the last column, we have shown results corresponding to the quenched value.
| Configurations | |||||||||||||
| (MeV) | f7→f7 | f7→f5 | p3→p3 | p3→f5 | p3→p1 | f5→f7 | f5→p3 | f5→f5 | p1→p3 | p1→p1 | M(GT) | B(GT) | B(GT) |
| 0.321 | 0.0067 | -0.1736 | 0.6391 | 0.0000 | -0.0154 | -0.3208 | 0.0000 | -0.0754 | 0.3621 | -0.0407 | 0.3820 | 0.1459 | 0.0636 |
| 0.700 | 0.0104 | 0.0860 | 0.2193 | 0.0000 | -0.6783 | -0.0272 | 0.0000 | 0.1103 | 0.1883 | 0.0403 | 0.0500 | 0.0025 | 0.0010 |
| 1.107 | 0.0549 | -0.2544 | 1.1126 | 0.0000 | 0.0456 | -0.1373 | 0.0000 | -0.0871 | -0.0073 | 0.0058 | 0.7328 | 0.5371 | 0.2339 |
| 1.417 | 0.0314 | -0.3385 | -0.1860 | 0.0000 | 0.8166 | -0.2786 | 0.0000 | 0.1355 | 0.4024 | -0.0132 | 0.5695 | 0.3244 | 0.1413 |
| 2.160 | -0.0005 | 0.0909 | -0.0481 | 0.0000 | 0.0971 | 0.0449 | 0.0000 | -0.4118 | 0.1932 | -0.0209 | 0.0547 | 0.0030 | 0.0013 |
| 2.376 | 0.0190 | -0.4268 | 0.3875 | 0.0000 | 0.3629 | -0.1324 | 0.0000 | 0.3358 | 0.0995 | -0.0085 | 0.6371 | 0.4059 | 0.1767 |
| 2.554 | -0.0561 | 0.1439 | -0.2656 | 0.0000 | 0.1807 | 0.0662 | 0.0000 | -0.2830 | -0.0378 | -0.1446 | 0.3963 | 0.1571 | 0.0685 |
Table 4.
Table 5. Same as Table 4, but for KB3G effective interaction in the case of transitions.
| Configurations | |||||||||||||
| (MeV) | f7→f7 | f7→f5 | p3→p3 | p3→f5 | p3→p1 | f5→f7 | f5→p3 | f5→f5 | p1→p3 | p1→p1 | M(GT) | B(GT) | B(GT) |
| 0.000 | 0.0097 | 0.0661 | -0.2823 | 0.0000 | -0.2189 | 0.1222 | 0.0000 | 0.1719 | -0.1352 | 0.0199 | 0.2466 | 0.0608 | 0.0265 |
| 0.517 | 0.0177 | -0.2810 | 0.7486 | 0.0000 | 0.6124 | -0.1821 | 0.0000 | -0.0334 | 0.2453 | -0.0124 | 1.1152 | 1.2436 | 0.5423 |
| 0.850 | 0.0012 | -0.0149 | 0.5104 | 0.0000 | -0.5272 | -0.1518 | 0.0000 | 0.0673 | 0.2405 | -0.0024 | 0.1232 | 0.0152 | 0.0066 |
| 1.102 | -0.0300 | 0.0590 | -0.8177 | 0.0000 | 0.1395 | -0.0502 | 0.0000 | 0.1576 | 0.0516 | -0.0240 | 0.5144 | 0.2646 | 0.1153 |
| 1.594 | -0.0146 | 0.1742 | -0.0122 | 0.0000 | -0.5397 | 0.1552 | 0.0000 | -0.0094 | -0.4379 | 0.0024 | 0.6819 | 0.4650 | 0.2024 |
| 1.744 | -0.0249 | 0.2527 | -0.2277 | 0.0000 | -0.0169 | 0.1304 | 0.0000 | -0.7449 | -0.0137 | -0.0145 | 0.6596 | 0.4351 | 0.1894 |
| 1.961 | 0.0008 | 0.0626 | 0.0119 | 0.0000 | -0.2311 | -0.0316 | 0.0000 | 0.0673 | 0.1987 | 0.0262 | 0.10148 | 0.0110 | 0.0048 |
Table 5.
ferent orbitals in the calculated values. Present theoretical work will add more information to Ref. [19] where experimental data are reported.
Acknowledgments
V.K. acknowledges financial support from SERB Project (EEQ/2019/000084), Govt. of India. The support and the resources provided by PARAM Shivay Facility under the National Supercomputing Mission, Government of India at the Indian Institute of Technology, Varanasi are gratefully acknowledged. P.C.S. acknowledges a research grant from SERB (India), CRG/2019/000556. We would like to thank Prof. Y. Fujita and Dr. S. E. A. Orrigo for useful discussions during this work.
References
References
- [1]S. R. Stroberg, J. D. Holt, A. Schwenk, and J. Simonis, Phys. Rev. Lett. 126, 022501 (2021).
- [2]F. Nunes, Physics Today 74, 5, 34 (2021).
- [3]T. Otsuka, A. Gade, O. Sorlin, T. Suzuki, and Y. Utsuno, Rev. Mod. Phys. 92, 015002 (2020).
- [4]Y. Fujita, B. Rubio and W. Gellettly, Prog. Part. Nucl. Phys. 66, 549 (2011).
- [5]H. Ejiri, J. Suhonen and K. Zuber, Phys. Rep. 797, 1 (2019).
- [6]S. E. A. Orrigo et al., Phys. Rev. Lett. 112, 222501 (2014).
- [7]S. E. A. Orrigo et al., Phys. Rev. C 93, 044336 (2016).
- [8]F. Molina et al., Phys. Rev. C 91, 014301 (2015).
- [9]T. Adachi et al., Phys. Rev. C 85, 024308 (2012).
- [10]T. Adachi et al., Phys. Rev. C 73, 024311 (2006).
- [11]A. A. Ciemny et al., Eur. Phys. J. A 52, 89 (2016).
- [12]M. J. López Jiménez et al. Phys. Rev. C 66, 025803 (2002).
- [13]C .Mazzocchi et al. Eur. Phys. J. A 12, 269 (2001).
- [14]E. Grodner et al., Phys. Rev. Lett. 113, 092501 (2014).
- [15]L. Kucuk et al., Eur. Phys. J. A 53, 134 (2017).
- [16]A. Juodagalvis and S. Aberg, Nucl. Phys. A 683, 207 (2001).
- [17]P.C. Srivastava, R. Sahu and V.K.B. Kota, Eur. Phys. J. A 51, 3 (2015).
- [18]S. Pittel, A. Carranza M., and J. G. Hirsch, Journal of Physics: Conference Series 1610, 012012 (2020).
- [19]S.E.A. Orrigo et al., Phys. Rev. C 103, 014324 (2021).
- [20]D. H. Wilkinson and B. E. F. Macefield, Nucl. Phys. A 232, 58 (1974).
- [21]A. Sirlin and R. Zucchini, Phys. Rev. Lett. 57, 1994 (1986).
- [22]D. H. Wilkinson, A. Gallmann, and D. E. Alburger, Phys. Rev. C 18, 401 (1978).
- [23]E. Caurier, G. Martínez-Pinedo, F. Nowacki, A. Poves, J. Retamosa, and A. P. Zuker, Phys. Rev. C 59, 2033 (1999).
- [24]B. A. Brown and B. H. Wildenthal, At. Data Nucl. Data Tables 33, 347 (1985).
- [25]G. Martinez-Pinedo and A. P. Zuker, Phys. Rev. C 53, R2602(R) (1996).
- [26]A. Saxena, P.C. Srivastava and T. Suzuki, Phys. Rev. C 97, 024310 (2018).
- [27]A. Kumar, P.C. Srivastava and T. Suzuki, Prog. Theo. Expt. Phys. 2020, 033D01 (2020).
- [28]V. Kumar, P.C. Srivastava, and H. Li, Jour. Phys. G: Nucl. and Part. Phys. 43, 105104 (2016).
- [29]V. Kumar and P.C. Srivastava, Eur. Phys. J. A 52, 181 (2016).
- [30]A. Kumar, P. C. Srivastava, J. Kostensalo and J. Suhonen, Phys. Rev. C. 101, 064304 (2020).
- [31]A. Kumar, P. C. Srivastava and J. Suhonen, Eur. Phys. J. A, 57, 225 (2021).
- [32]P. Choudhary, A. Kumar, P.C. Srivastava, T. Suzuki, Phys. Rev. C 103, 064325 (2021) .
- [33]V. Kumar and P.C. Srivastava, Nucl. Phys. A 1002, 121989 (2020).
- [34]M. Honma, T. Otsuka, T. Mizusaki and M. Hjorth-Jensen, Phys. Rev. C 80, 064323 (2009).
- [35]B.A. Brown and A.F. Lisetskiy (unpublished); see also endnote (28) in B. Cheal et al., Phys. Rev. Lett. 104, 252502 (2010).
- [36]E. Caurier, K. Langanke, G. Martínez-Pinedo, F. Nowacki, Nucl. Phys. A 653, 439 (1999).
- [37]M. Honma et al., Eur. Phys. J. A 25, 499 (2005).
- [38]A. Poves and A. Zuker, Phys. Rep. 70, 235 (1981).
- [39]M. Honma et al., Phys. Rev. C 69, 034335 (2004).
- [40]B. A. Brown et al., Nucl. Data Sheets 120, 115 (2014).
- [41]N. Shimizu et al., Comp. Phys. Com. 244, 372 (2019).