WorksPhysics and Astronomy
Molecular beam deposition of a new layered pnictide with distorted Sb square nets
Abstract
While the family of layered pnictides ( : rare or alkaline earth metals, : transition metals, : Sb/Bi) can host Dirac dispersions based on Sb/Bi square nets, nearly half of them has not been synthesized yet for possible combinations of the and cations. Here we report the fabrication of EuCdSb with the largest -site ionic radius, which is stabilized for the first time in thin film form by molecular beam deposition. EuCdSb crystallizes in an orthorhombic structure and exhibits antiferromagnetic ordering of the Eu magnetic moments at K. Our successful growth will be an important step for further exploring novel Dirac materials using film techniques.
Dirac materials with linear energy dispersions have attracted growing attention in the light of exploring new compounds and elucidating their magnetotransport [1]. In particular, Dirac dispersions interacting with magnetism have significant potential for producing rich quantum transport [2, 3, 4]. Recently, ternary layered pnictides ( : rare or alkaline earths, : transition metals, : Sb/Bi) have been reported to host highly anisotropic Dirac or Weyl dispersions [5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22], and unprecedented quantum transport has been observed originating from the interplay between the Dirac dispersion and magnetic ordering, as exemplified by bulk half-integer quantum Hall effect in EuMnBi [5, 6], BaMnSb [7, 8], and SrMnSb [9]. Therefore, exploring new compounds especially with magnetic and/or ions is important for systematically investigating their unique magnetotransport.
As summarized in Figure 1(a), there are four space groups (, , , and ) for Sb. Sb have two types of Sb atoms in the unit cell: one with valence (defined as Sb1) consisting of the Sb net which hosts Dirac or Weyl dispersions and the other with valence (defined as Sb2) forming Sb tetrahedra around the -site cations, which are separated by layers. The -site cations are coincidently stacked across the Sb1 net in and , while they are staggeredly stacked in and . The Sb1 square nets are slightly distorted in and , resulting in a zig-zag chainlike structure along the -axis.
Figure 1. (a) Crystal structures of the three space groups in systems (, , , and ). They have two types of Sb atoms (valence states of for Sb1 and for Sb2), which are separated by layers. One unit cell of each structure is represented by black lines. (b) Mapping of previously synthesized bulks (open squares) [9, 10, 11, 12, 13, 14, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37] and the newly stabilized EuCdSb film in this study (filled square), as a function of (= Ca, Yb, Eu, Sr, and Ba) and (= Mn, Zn, and Cd)-site ionic radii. Depending on their space groups, the squares are colored in blue (), black (), green (), or red (). This map clearly shows that the or structure becomes stable for smaller, while and do for larger -site ionic radius. Regarding BaMnSb, its detailed structure has been recently found [7, 8], while it was originally characterized as [30, 31, 32].
As seen in the map in Figure 1(b), it becomes difficult to stabilize Sb with smaller -site and larger -site ionic radii, and nearly half of Sb has not been synthesized yet for all the possible combinations of the and cations [9, 10, 11, 12, 13, 14, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37]. In this lower right region of the map in Figure 1(b), phase separation may occur, for example, from EuCdSb to EuSb with valence [38, 39] and EuCdSb with valence [40], because Sb has different and valence states in one structure. Especially in the case of , its high vapor pressure also makes the fabrication difficult.
In this context, developing techniques for stabilizing new Sb compounds is strongly called for advancing this research field. Here we report the fabrication of its new member EuCdSb, which is stabilized for the first time in thin film form by molecular beam deposition. EuCdSb crystallizes in the orthorhombic structure and exhibits unique nonmetallic transport.
Single-crystalline (0001) AlO substrates were annealed at 850 °C in a base pressure about Pa and then EuCdSb films were grown on it in an Epiquest RC1100 chamber [41] The molecular beams were simultaneously provided from conventional Knudsen cells containing 3N Eu, 6N Cd, and 6N Sb. The growth temperature was set at 390 °C, and the beam equivalent pressures, measured by an ionization gauge, were set to Pa for Eu, Pa for Cd, and Pa for Sb (for details see Supplementary Materials [42]). To avoid Cd deficiency, the Cd flux was set 40 times higher than the Eu flux. The film thickness was typically set at 25 nm for structural characterization and magnetotransport measurements, and 50 nm for magnetization measurements. The growth rate was about 0.07 Å/s. Magnetotransport was measured by a standard four-probe method for 200 m-width multi-terminal Hall bars. Longitudinal and Hall resistivities were measured up to 22.4 T using a non-destructive pulsed magnet [43] at the International MegaGauss Science Laboratory in the Institute for Solid State Physics at the University of Tokyo. Temperature dependence of the resistivity and magnetization was measured using a Quantum Design Physical Properties Measurement System and a Magnetic Property Measurement System, respectively.
Figure 2 shows structural characterization of an obtained EuCdSb film. As shown in the x-ray diffraction (XRD) - scan in Figure 2(a), the reflections from the (200) EuCdSb lattice planes are observed without any impurity phases. Its out-of-plane lattice constant along the -axis is calculated to be 22.53 Å. As confirmed in Figure 2(b), clear Laue fringes indicate highly coherent lattice ordering along the out-of-plane direction. A rocking curve taken for the (800) film peak in Figure 2(c) is very sharp with a full width at half maximum of 0.11 degrees, ensuring high crystallinity of the film. On the other hand, the in-plane XRD reciprocal space map shown in Figure 2(d) suggests that the - and -axes are rather randomly oriented forming domain structures. In-plane (020) and (002) EuCdSb peaks are also indiscernible, indicating that the in-plane lattice constants of the - and -axes are almost the same. The atomic force microscopy image in Figure 2(e) reveals a flat surface with a root mean square (RMS) roughness of 0.27 nm.

Figure 2. (a) XRD - scan of a EuCdSb film grown on a (0001) AlO substrate. AlO substrate peaks are marked with an asterisk. (b) Enlarged view of the - scan and (c) rocking curve around the (800) EuCdSb film peak. (d) In-plane reciprocal space mapping measured by grazing incidence. (e) Surface morphology of the film, taken by atomic force microscopy.
The crystal structure of this new compound is closely examined by taking high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) images. A cross-sectional image of the EuCdSb film in Figure 3(a) shows clear stacking of the Sb square nets and other layers. Its in-plane lattice constant along the -axis is calculated to be 4.47 Å by comparing with the -axis length determined by the XRD - scan. Higher resolution HAADF-STEM image and corresponding elemental maps in Figure 3(b)–Figure 3(e) reveal additional details of the atomic arrangement. Staggered stacking of Eu atoms across the Sb1 layers rules out the and structures among the four possible space groups as shown in Figure 1(a). As confirmed in the intensity profiles in Figure 3(f), moreover, alternate left and right shifts of the Sb atoms are clearly resolved in the Sb1 layers, in contrast to the equally spaced Cd atoms. These Sb shifts correspond to the distorted Sb square nets as shown in Figure 3(g) and thus we conclude that the EuCdSb crystal structure is . The structure is a nonsymmorphic structure which protects band crossings of Dirac dispersions [21].

Figure 3. (a) Cross-sectional high-angle annular dark-field (HAADF) scanning transmission electron microscopy (STEM) image of the EuCdSb film. (b) Higher resolution HAADF-STEM image for the boxed region in (a) and energy dispersive X-ray spectrometry map for (c) Eu , (d) Cd , and (e) Sb edges. The Eu, Cd, and Sb atoms are aligned as expected for the compounds shown in Figure 1(a). (f) Intensity line profiles of Cd and Sb1 layers extracted from dotted horizontal lines in (b). In contrast to the equally spaced Cd atoms, alternate left and right shifts are clearly resolved in the Sb1 layers, as marked with arrows. (g) Cross-sectional structure, viewed along the -axis. Arrows represent the atomic shift or distorted square nets in the Sb1 layers.
Figure 4 summarizes fundamental transport and magnetic properties of the EuCdSb films. Temperature dependence of the magnetization in Figure 4(a) shows a kink at K, which is ascribed to antiferromagnetic (AFM) ordering of the Eu magnetic moments as detailed in the following. This kink is observed much sharper for the in-plane field, while an almost constant behavior below is found for the out-of-plane field. This indicates that the Eu magnetic moments are antiferromagnetically ordered in the in-plane. Similar to other Eu compounds [5, 6, 14, 25, 26, 36], the Eu magnetic moments of EuCdSb probably forms the A-type AFM structure where ferromagnetic (FM) in-plane layers are antiferromagnetically stacked along the out-of-plane direction. Figure 4(b) shows the nonmetallic temperature dependence of the longitudinal resistivity. A drastic upturn at 15 K coincides with the AFM ordering, as also confirmed by its shift upon increasing the magnetic field. This nonmetallic temperature dependence is a common feature only with EuMnSb [14, 25, 26], and the further upturn below appears only in EuCdSb, while other ABSb compounds shown in Figure 1(b) exhibit metallic behavior [9, 10, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37].

Figure 4. (a) Temperature dependence of magnetization , taken with applying the out-of-plane or in-plane magnetic field of 0.1 T. Both curves exhibit a kink at K. (b) Temperature dependence of longitudinal resistivity . The inset shows an enlarged view at low temperatures around . A drastic upturn observed below 15 K shifts to lower temperatures for 9 T. (c) Magnetoresistance ratios (MRR ) taken with sweeping the out-of-plane field at various temperatures. The saturation field is estimated to be T at 1.4 K. The inset compares low-field MRR, taken for the out-of-plane (solid line) and in-plane (dashed line, ) fields at 1.4 K. For the in-plane field, transition from positive to negative magnetoresistance is found at 1.7 T. (d) Hall resistivity taken at various temperatures.
Figure 4(c) presents magnetoresistance (MR) taken by out-of-plane magnetic field sweeps at various temperatures. Negative MR at the base temperature of 1.4 K saturates at T, which shifts to lower fields with increasing temperature and then disappears above . Therefore, it can be understood that this saturation corresponds to the phase transition from an AFM to a forced ferromagnetic (FM) phase and electron scattering by the Eu magnetic moments is suppressed through this canting process. For the in-plane field as shown in the inset, on the other hand, a transition from positive to negative MR is observed. This is ascribed to a spin-flop transition, consistent with the in-plane AFM ordering in the ground state (see Supplementary Materials [42]). After the spin-flop transition, a similar negative MR is observed also for the in-plane field.
Finally, Figure 4(d) shows Hall resistivity measured at various temperatures. While more than one types of carriers contribute in the conduction in most of the , an almost linear Hall resistivity is observed for EuCdSb in the entire temperature range. Carrier density and mobility are estimated at and by single-carrier fitting at 1.4 K. Despite the large Eu magnetic moments, there are no clear indications of anomalous Hall effect for EuCdSb, similar to other magnetic Sb [7, 8, 9, 10, 25, 29, 30, 31, 32, 33, 34, 35, 36].
In summary, we have demonstrated the fabrication of a new Sb compound using molecular beam deposition. EuCdSb crystallizes in orthorhombic structure and exhibits unique nonmetallic transport properties in addition to in-plane AFM ordering. Our successful growth of EuCdSb by film-technique paves the way for further exploring systems and designing their heterostructures.
Supplementary Material
Phase diagram for optimizing growth condition, wide-range TEM image, and magnetization curves confirming the spin flop transition are provided in the supplementary material.
Acknowledgments
The authors would like to thank H. Sakai for helpful discussions. This work was supported by JST PRESTO Grant No. JPMJPR18L2 and JST CREST Grant No. JPMJCR16F1, Japan and by Grant-in-Aid for Scientific Research (B) No. JP18H01866 from MEXT, Japan. The data that support the findings of this study are available from the corresponding author upon reasonable request.
Data Availability
The data that support the findings of this study are available from the corresponding author upon reasonable request.
Figures
References
- [2]T. Jungwirth, J. Sinova, A. Manchon, X. Marti, J. Wunderlich, and C. Felser, Nat. Phys. 14, 200 (2018).
- [3]L. Šmejkal, Y. Mokrousov, B. Yan, and A. H. MacDonald, Nat. Phys. 14, 242 (2018).
- [4]D. F. Shao, G. Gurung, S. H. Zhang, and E. Y. Tsymbal, Phys. Rev. Lett. 122, 077203 (2019).
- [5]H. Masuda, H. Sakai, M. Tokunaga, Y. Yamasaki, A. Miyake, J. Shiogai, S. Nakamura, S. Awaji, A. Tsukazaki, H. Nakao et al., Sci. Adv. 2, e1501117 (2016).
- [6]H. Masuda, H. Sakai, M. Tokunaga, M. Ochi, H. Takahashi, K. Akiba, A. Miyake, K. Kuroki, Y. Tokura, and S. Ishiwata, Phys. Rev. B 98, 161108(R) (2018).
- [7]J. Y. Liu, J. Yu, J. L. Ning, H. M. Yi, L. Miao, L. J. Min, Y. F. Zhao, and W. Ning, arXiv:1907.106318 (2019).
- [8]H. Sakai, H. Fujimura, S. Sakuragi, M. Ochi, R. Kurihara, A. Miyake, M. Tokunaga, T. Kojima, D. Hashizume, T. Muro et al., Phys. Rev. B 101, 081104(R) (2020).
- [9]J. Ling, Y. Liu, Z. Jin, S. Huang, W. Wang, C. Zhang, X. Yuan, S. Liu, E. Zhang, C. Huang et al., Chin. Phys. B 27, 017504 (2018).
- [10]R. Kealhofer, S. Jang, S. M. Griffin, C. John, K. A. Benavides, S. Doyle, T. Helm, P. J. Moll, J. B. Neaton, J. Y. Chan et al., Phys. Rev. B 97, 045109 (2018).
- [11]C. P. Weber, M. G. Masten, T. C. Ogloza, B. S. Berggren, M. K. Man, K. M. Dani, J. Liu, Z. Mao, D. D. Klug, A. A. Adeleke et al., Phys. Rev. B 98, 155115 (2018).
- [12]S. V. Ramankutty, J. Henke, A. Schiphorst, R. Nutakki, S. Bron, G. Araizi-Kanoutas, S. Mishra, L. Li, Y. Huang, T. Kim et al., Sci. Phys. 4, 010 (2018).
- [13]Z. Qiu, C. Le, Z. Liao, B. Xu, R. Yang, J. Hu, Y. Dai, and X. Qiu, Phys. Rev. B 100, 125136 (2019).
- [14]J. R. Soh, P. Manuel, N. M. Schröter, C. J. Yi, F. Orlandi, Y. G. Shi, D. Prabhakaran, and A. T. Boothroyd, Phys. Rev. B 100, 174406 (2019).
- [15]J. Park, G. Lee, F. Wolff-Fabris, Y. Y. Koh, M. J. Eom, Y. K. Kim, M. A. Farhan, Y. J. Jo, C. Kim, J. H. Shim et al., Phys. Rev. Lett. 107, 126402 (2011).
- [16]K. Wang, D. Graf, L. Wang, H. Lei, S. W. Tozer, and C. Petrovic, Phys. Rev. B 85, 041101(R) (2012).
- [17]G. Lee, M. A. Farhan, J. S. Kim, and J. H. Shim, Phys. Rev. B 87, 245104 (2013).
- [18]X. Yan, C. Zhang, S. S. Liu, Y. W. Liu, D. W. Zhang, F. X. Xiu, and P. Zhou, Front. Phys. 12, 127209 (2017).
- [19]J. Y. Liu, J. Hu, Q. Zhang, D. Graf, H. B. Cao, S. M. Radmanesh, D. J. Adams, Y. L. Zhu, G. F. Cheng, X. Liu et al., Nat. Mater. 16, 905 (2017).
- [20]S. Klemenz, S. Lei, and L. M. Schoop, Annu. Rev. Mater. Res. 49, 185 (2019).
- [21]S. Klemenz, L. Schoop, and J. Cano, Phys. Rev. B 101, 165121 (2020).
- [22]K. Takahashi, J. Shiogai, H. Inoue, S. Ito, S. Kimura, S. Awaji, and A. Tsukazaki, AIP Adv. 10, 105216 (2020).
- [23]G. Cordier and H. Schäfer, Z. Naturforsch. 32b, 383 (1977).
- [24]E. Brechtel, G. Cordier, and H. Schäfer, J. Less-Common Met. 79, 131 (1981).
- [25]C. Yi, S. Yang, M. Yang, L. Wang, Y. Matsushita, S. Miao, Y. Jiao, J. Cheng, Y. Li, K. Yamaura et al., Phys. Rev. B 96, 205103 (2017).
- [26]D. Gong, S. Huang, F. Ye, X. Gui, J. Zhang, W. Xie, and R. Jin, Phys. Rev. B 101, 224422 (2020).
- [27]J. S. You, I. Lee, E. S. Choi, Y. J. Jo, J. H. Shim, and J. S. Kim, Curr. Appl. Phys. 19, 230 (2019).
- [28]A. F. May, E. S. Toberer, and G. J. Snyder, J. Appl. Phys. 106, 013706 (2009).
- [29]H. J. Park, L. J. Sandilands, J. S. You, H. S. Ji, C. H. Sohn, J. W. Han, S. J. Moon, K. W. Kim, J. H. Shim, J. S. Kim et al., Phys. Rev. B 93, 205122 (2016).
- [30]J. Liu, J. Hu, H. Cao, Y. Zhu, A. Chuang, D. Graf, D. J. Adams, S. M. Radmanesh, L. Spinu, I. Chiorescu et al., Sci. Rep. 6, 30525 (2016).
- [31]S. Huang, J. Kim, W. A. Shelton, E. W. Plummer, and R. Jin, Proc. Natl. Acad. Sci. USA 114, 6256 (2017).
- [32]S. Huang, L. Xing, R. Chapai, R. Nepal, and R. Jin, Phys. Rev. Mater. 4, 065001 (2020).
- [33]J. B. He, Y. Fu, L. X. Zhao, H. Liang, D. Chen, Y. M. Leng, X. M. Wang, J. Li, S. Zhang, M. Q. Xue et al., Phys. Rev. B 95, 045128 (2017).
- [34]Y. Y. Wang, S. Xu, L. L. Sun, and T. L. Xia, Phys. Rev. Mater. 2, 021201(R) (2018).
- [35]Y. Liu, T. Ma, L. Zhou, W. E. Straszheim, F. Islam, B. A. Jensen, W. Tian, T. Heitmann, R. A. Rosenberg, J. M. Wilde et al., Phys. Rev. B 99, 054435 (2019).
- [36]A. Wang, S. Baranets, Y. Liu, X. Tong, E. Stavitski, J. Zhang, Y. Chai, W.-G. Yin, S. Bobev, and C. Petrovic, Phys. Rev. Res. 2, 033462 (2020).
- [37]J. Liu, P. Liu, K. Gordon, E. Emmanouilidou, J. Xing, D. Graf, B. C. Chakoumakos, Y. Wu, H. Cao, D. Dessau et al., Phys. Rev. B 100, 195123 (2019).
- [38]F. Hulliger and R. Schmelczer, J. Solid State Chem. 26, 389 (1978).
- [39]M. Ohno, M. Uchida, R. Kurihara, S. Minami, Y. Nakazawa, S. Sato, M. Kriener, M. Hirayama, A. Miyake, Y. Taguchi et al., submitted.
- [40]H. Su, B. Gong, W. Shi, H. Yang, H. Wang, W. Xia, Z. Yu, P. J. Guo, J. Wang, L. Ding et al., APL Mater. 8, 011109 (2020).
- [41]Y. Nakazawa, M. Uchida, S. Nishihaya, S. Sato, A. Nakao, J. Matsuno, and M. Kawasaki, APL Mater. 7, 071109 (2019).
- [42]See Supplementary Materials for detailed characterization at [URL will be inserted by publisher].
- [43]M. Uchida, Y. Nakazawa, S. Nishihaya, K. Akiba, M. Kriener, Y. Kozuka, A. Miyake, Y. Taguchi, M. Tokunaga, N. Nagaosa et al., Nat. Commun. 8, 2274 (2017).
