betaFeedback

WorksPhysics and Astronomy

Fluctuation modes in the initial state of heavy-ion collisions: from 2D to 3D hybrid simulations

Abstract

This dissertation investigates how the initial stages of relativistic heavy-ion collisions shape the evolution of the quark-gluon plasma (QGP) and the observables measured experimentally. Particular attention is given to the initial state and pre-equilibrium dynamics, which constitute the main sources of uncertainty in hybrid simulations. The first part of the dissertation reviews the framework underlying state-of-the-art hybrid simulations and the numerical tools used in phenomenological analyses. The second part studies the matching between pre-equilibrium evolution and viscous hydrodynamics. Since commonly used conformal kinetic-theory descriptions are inconsistent with the non-conformal hydrodynamic equation of state, an entropy-density matching prescription is proposed. This prescription reduces the artificial bulk pressure generated at the switching time and improves the consistency of the hybrid framework. The third part develops a mode-by-mode decomposition of initial energy-density profiles to isolate fluctuation modes and quantify their contributions to final observables. Applied to Pb-Pb collisions across centrality classes and extended to a fully three-dimensional O-O collision system, the method shows that initial fluctuations survive hydrodynamic evolution and leave measurable imprints on final observables. In O-O collisions, fluctuations can dominate over geometric effects from the impact parameter, demonstrating that intermediate-sized systems are not simply scaled-down versions of large systems. Overall, these results provide tools for constraining the early stages of heavy-ion collisions and for understanding how fluctuations propagate through the QGP evolution.

Dissertation

Supervisor and 1st Reviewer: Prof. Dr. N. Borghini

2nd Reviewer: Prof. Dr. S. Schlichting

UNIVERSITÄT BIELEFELD

Faculty of Physics

Universität Bielefeld

Fakultät für Physik

In memory of my father.

Introduction to the physics of the quark–gluon plasma

With the goal of facilitating the understanding of the analysis presented in this work, it is necessary to introduce the research field and its current status. The state of matter explored in this dissertation is known as the quark–gluon plasma (QGP), and this chapter provides the basic background required to understand the context and the main properties of QGP physics.

This chapter is divided into four sections to build this introductory framework. § 1.1 presents the main properties of quantum chromodynamics (QCD), the theory responsible for describing hadronic matter. § 1.2 explores the properties of hadronic matter under different conditions of temperature and baryonic potential. Particular attention is given to extreme temperatures and vanishing baryonic potential, where the QGP can be produced through heavy-ion collisions, which are discussed in § 1.3. Finally, § 1.4 discusses the relevance of this research field and how this work contributes to advancing the current frontier of knowledge in the area.

It is important to emphasize that this dissertation uses natural units. Therefore, the fundamental physical constants, such as the reduced Planck constant ℏ\hbar, the speed of light cc, and the Boltzmann constant kBk_{B}, are set equal to 1. Consequently, for convenience, physical quantities are expressed in units of energy and length.

Quantum chromodynamics (QCD)

Throughout the history of humanity, there has been a persistent effort to better understand nature and its fundamental laws. In this pursuit, the identification of the most elementary constituents of matter became a central objective. As a result, the Standard Model of particle physics was established, providing a successful theoretical framework that describes matter as being composed of 12 fermions and 5 bosons responsible for the fundamental interactions [1].

There are four fundamental interactions in nature: the gravitational force, originating from the dynamics of massive bodies; the electromagnetic force, generated by electric charges; the weak nuclear force, responsible for atomic decays; and the strong nuclear force, generated by the color charge of quarks and gluons [1]. Among these, the Standard Model is still not able to associate a boson that explains gravitation within a quantum framework.

In this dissertation, the focus is on hadronic matter, which is composed of quarks and is subject to the strong interaction. Although quarks can also interact through the other forces, the relevant energy scale for studying internal nuclear structure is sufficiently high that these contributions become negligible compared to the strong force, as shown in Table 1.1.

ForceRelative intensityBoson mediatorForce range
Strong nuclear1Gluon10−15 m10^{-15}\ \mathrm{m}
Electromagnetic10−310^{-3}Photon∞\infty
Weak nuclear10−810^{-8}W±\mathrm{W}^{\pm} and Z\mathrm{Z}10−13 m10^{-13}\ \mathrm{m}
Gravitational10−3710^{-37}?∞\infty

Table 1.1. Information about the fundamental interactions. The relative intensity of each force is approximately given for the interaction between two fundamental particles separated by a distance on the order of the atomic radius 1 fm=10−15 m1\ \mathrm{fm}=10^{-15}\ \mathrm{m}. These values are estimations and should not be interpreted as exact. The table is adapted from Ref. [2].

The strong nuclear interaction was proposed to explain atomic stability. Since atoms contain positively charged protons concentrated within a very small nucleus, one would expect a strong electrostatic repulsion among them. The existence of nuclei therefore indicates the presence of an interaction stronger than the electromagnetic repulsion and limited to nuclear dimensions, which explains the origin of its name.

The first attempt to describe this interaction was the Yukawa model, which proposed that it is mediated by mesons, namely pions. Because these mediators are massive, the interaction is naturally limited to a short range compatible with nuclear scales. This description relies on isospin symmetry, in which protons and neutrons are understood as two different states of the same particle. However, this symmetry is not exact, since protons and neutrons present a small mass difference.

In 1964, the quark model was independently proposed by Gell-Mann and Zweig, explaining that protons and neutrons are composed of more fundamental particles named quarks. A few years later, experimental evidence for quarks was obtained through deep inelastic scattering experiments [3].

The modern description of the strong interaction is given by QCD [1, 4], with quarks interacting via gluons. The allowed bound states include three quarks or three antiquarks, forming baryons such as protons and neutrons, and quark–antiquark pairs, forming mesons such as pions and kaons. In all cases, the resulting particles are neutral with respect to color charge due to confinement. This property also allows exotic states, such as tetraquarks and pentaquarks, which combine four and five quarks/antiquarks, respectively, while still preserving overall color neutrality. Consequently, color charge is not observed at macroscopic scales.

Confinement is not directly derived from the QCD Lagrangian density; instead, it is incorporated phenomenologically to explain why isolated color charges are not observed. For this reason, its formal mathematical description is still not fully understood. Current phenomenological models associate confinement with a linear potential [2], analogous to the restoring force of an elastic spring.

Another fundamental property of QCD is asymptotic freedom. This feature refers to the energy dependence of the strong coupling constant, as shown in Figure 1.1. In QCD, the gauge bosons that mediate the interaction, namely gluons, also carry color charge and can therefore interact among themselves. This self-interaction distinguishes QCD from quantum electrodynamics (QED). As a consequence, the coupling constant decreases at high energies, allowing QCD to be treated perturbatively in this regime. At low energies, however, the coupling becomes large and perturbative methods are no longer applicable. In this case, a first-principles numerical approach known as lattice QCD is employed, in which space-time is discretized in order to evaluate the QCD path integrals. Nevertheless, this method is limited to vanishing chemical potential due to the QCD sign problem [5], although extensions to small chemical potentials are possible as an approximation.

QCD coupling constant as a function of the energy scale

Figure 1.1. QCD coupling constant αs\alpha_s as a function of the energy scale QQ. This behavior reflects a fundamental property of QCD: a strong coupling at low energies and a weaker coupling at high energies. Figure from Ref. [6].

The properties of confinement and asymptotic freedom are central to QCD. At sufficiently high energies, the coupling constant becomes small enough to significantly weaken the interaction between quarks and gluons. Under such conditions, it is expected that a new state of matter can be formed, in which quarks and gluons are no longer confined inside hadrons but become deconfined in the QGP, which will be discussed in the next section.

The QCD phase diagram

A phase diagram is a representation of the relevant thermodynamic variables that, when varied, modify the microscopic state of matter and may lead to phase transitions. According to statistical mechanics [7], a phase transition can be first order, characterized by a discontinuity in the first derivative of the Helmholtz free energy; second order, when the discontinuity appears in the second or higher-order derivative; or a crossover, when the microscopic structure of matter changes smoothly without any discontinuity. A simple everyday example is water at atmospheric pressure: when heated from the solid phase, its molecular structure gradually reorganizes until it reaches 0 ∘C0\,^{\circ}\mathrm{C}, where the transition to the liquid phase occurs. This first-order transformation is easily identified because it is accompanied by a clear macroscopic change in the system.

The phase diagram of hadronic matter is shown in Figure 1.2. It should be understood as a schematic representation, since several regions of the diagram have not yet been experimentally accessed. Nuclear matter under ordinary conditions is represented by the black circle, located at finite baryonic chemical potential and low temperature. In this region of low to moderate temperature and baryonic chemical potential, quarks are confined within bound states, as described in § 1.1. As suggested by the behavior of the QCD coupling constant shown in Figure 1.1, the transition from nuclear matter to other phases is expected to occur only under conditions of extremely high energy.

Schematic phase diagram of QCD matter

Figure 1.2. Schematic phase diagram of QCD matter in terms of the relevant thermodynamic variables, temperature TT and baryonic chemical potential μB\mu_B. Figure from Ref. [8].

One way to increase the energy of the system is by increasing the baryonic chemical potential. In this direction of the diagram, a first-order phase transition is expected, which may lead to a color superconducting phase. In this phase, quarks form correlated states that allow color charge to be transported analogously to electric charge in an electrical superconductor. This region of the phase diagram is believed to be realized in the cores of neutron stars, where the baryonic density is sufficiently high [9].

Alternatively, the energy of nuclear matter can be increased by raising the temperature while keeping the baryonic chemical potential close to zero. In this regime, matter undergoes a crossover transition to a new phase known as the QGP, in which quarks and gluons are deconfined within a strongly interacting medium. The temperatures reached in this transition are of the same order as those of the early universe, which is why the QGP is often described as the matter that filled the primordial universe shortly after the Big Bang. The possibility of such a phase was first discussed theoretically in 1975 by Collins and Perry [10], who proposed the existence of superdense matter, and independently by Cabibbo and Parisi [11]. Experimental evidence for the QGP, however, was only reported decades later, when CERN announced strong indications for the formation of a new state of matter in heavy-ion collisions [12].

Because of the extreme conditions involved, neither high baryonic density nor extremely high temperature is easily accessible. Therefore, it is necessary to recreate such conditions in the laboratory in order to study these phase transitions. One way to achieve this is through heavy-ion collisions, in which highly energetic nuclei are accelerated and collide, producing a small and short-lived system that can reach the required energy densities, as discussed in the next section.

In this work, we focus exclusively on the region of vanishing baryonic chemical potential and high temperature. Nevertheless, other regions of the QCD phase diagram remain active areas of research, including studies of the internal structure of neutron stars [9, 13] and the search for a possible critical point [14, 15].

Ultrarelativistic heavy ion collisions

As briefly introduced in the previous section, the QGP cannot be accessed under ordinary natural conditions. Therefore, it is necessary to consider how this state of matter can be produced in the laboratory. In this context, ultrarelativistic heavy ion collisions are used to create the QGP, since they provide a dense hadronic environment at sufficiently high energy to undergo the crossover phase transition of QCD matter, as discussed previously. Currently, two main colliders collect data from such collisions: the Large Hadron Collider (LHC) at CERN, located on the border between France and Switzerland, where the principal heavy ion results are obtained by the ALICE detector; and the Relativistic Heavy Ion Collider (RHIC), located at Brookhaven National Laboratory in New York.

The basic idea is to accelerate heavy nuclei, such as Pb at the LHC and Au at RHIC, to velocities close to the speed of light. Along the direction of motion, Lorentz contraction occurs, and the collision can be described as a collision between two pancakes,1 as shown in Figure 1.3. The plasma created in such collisions [16] is an extremely small system, with a characteristic size on the order of 10−1410^{-14} m, and highly short-lived, surviving for only about 10−2310^{-23} s. The small size results from the challenge of concentrating hadronic matter at such high energies, since the ion beams must be precisely aligned. The short lifetime of the QGP is a consequence of the rapid expansion that follows the collision, which lowers the temperature and drives the system back to a confined state when T<155T < 155 MeV [16]. Consequently, only the final confined particles are detected experimentally, as illustrated in the time evolution shown in Figure 1.3.

Illustrative schema of the time evolution during a heavy ion collision

Figure 1.3. Illustrative schema of the time evolution during a heavy ion collision. Initially, the nuclei are Lorentz contracted into a pancake shape. After the collision, the QGP is produced as a continuous medium. As the system expands, the temperature decreases and hadronization occurs. Figure from Ref. [17].

Since the QGP produced in heavy ion collisions cannot be observed directly, its study relies on reconstructing the evolution of the system from the final state particles. Collision simulations provide a valuable tool for this purpose, allowing theoretical models to be tested by verifying whether they reproduce the experimentally measured observables under comparable initial conditions [18]. The theoretical description of the full-time evolution shown in Figure 1.3 is complex and involves multiple physical concepts; a more detailed discussion will be presented in the next chapter.

However, since the QGP cannot be measured directly, how can we determine whether it is indeed produced? When a collision occurs and the two nuclei are not perfectly aligned, they typically overlap in an elliptical region, as illustrated in Figure 1.4a. In Figure 1.4b, the resulting spatial anisotropy from this elliptical geometry is shown. If the produced matter exhibits collective behavior, its time evolution converts this spatial anisotropy into momentum anisotropy, as depicted in Figure 1.4c. This conversion arises from the anisotropic pressure gradients generated by the initial elliptical shape of the plasma, represented by the blue arrows in Figure 1.4b.

Illustration of the initial elliptical shape and its transformation into final momentum anisotropy

Figure 1.4. a) Illustration of the initial elliptical shape produced by the superposition of two nuclei that are not aligned. b) Emphasis on the initial spatial anisotropy, which generates different pressure gradients. c) During the time evolution, this spatial anisotropy is transformed into momentum anisotropy. This results in an enhanced production of final-state particles in a specific direction, which can serve as indirect evidence of QGP formation. Figure adapted from Ref. [19].

Experimentally, the number of hadrons produced in these collisions is measured as a function of the azimuthal angle. A larger particle yield observed along a preferred direction provides evidence that collective behavior is present. If no QGP were formed, one would expect, statistically, an isotropic particle distribution in azimuthal angle, independent of the initial geometric configuration. In that case, the initial elliptical overlap would not influence the directions of the emitted particles.

Several final state observables are used to quantify this collective behavior. One of the most important is the set of flow coefficients [20, 21]. These coefficients arise from expressing the azimuthal distribution of final state particles as a Fourier series [22]:

dNchdϕ∝1+2∑n=1∞vncos⁡n(ϕ−Φn),(1)\frac{\mathrm{d}N_{\mathrm{ch}}}{\mathrm{d}\phi} \propto1 + 2\sum_{n=1}^{\infty} v_n \cos n(\phi-\Phi_n), \tag*{(1)}

where ϕ\phi is the emission angle, Φn\Phi_n is the event plane angle, and vnv_n are the flow coefficients, which constitute key final observables in heavy ion collisions. In particular, the experimental observation of a nonzero v2v_2, known as elliptic flow, provides strong evidence of collectivity in these systems [23].

For small collision systems [24,25], the situation is somewhat different. In these cases, the initial geometry is closer to spherical, and anisotropies arise predominantly from event-by-event fluctuations rather than from a well-defined elliptical overlap region, as discussed later in this dissertation.

Why is this work important?

After this brief introduction to the field, the reader should now have a general understanding of the context of heavy-ion physics and how heavy-ion collisions can be used to investigate QCD matter under extreme conditions.

The primary objective of this dissertation is to study the early stages of heavy-ion collisions, a stage of the system evolution where most of the model uncertainties are concentrated. To achieve this, a phenomenological approach is employed to investigate fluctuations in the initial energy density profiles and their evolution toward the final observables. Through this analysis, it is possible to gain a deeper understanding of QCD properties in extreme regimes.

This dissertation begins in Chapter 2 with a detailed description of the standard hybrid framework used in heavy-ion collision simulations, including the numerical codes employed throughout this work. The following chapters then present the original analyses developed in this dissertation. Chapter 3 proposes a new matching procedure between the initial state and the pre-equilibrium phase based on entropy density. Chapter 4 introduces the mode formalism to investigate initial fluctuations as a function of centrality. Chapter 5 extends the framework to three-dimensional analyses in smaller collision systems. Finally, Chapter 6 interconnects the main ideas presented in this dissertation and provides an outlook for future research.

In this context, this dissertation focuses on the dynamics of QCD matter, particularly in out-of-equilibrium regimes and at high energies, contributing to the advancement of knowledge at the frontier of nuclear physics.

Hybrid model for heavy-ion collisions

After the brief introduction to the properties of QCD and the discussion of QGP production, it becomes necessary to better understand ultrarelativistic heavy-ion collisions, since they provide a valuable tool for studying this state of matter. As discussed in § 1.3, due to the indirect experimental measurements, it is essential to develop theoretical frameworks and test them through numerical simulations of such collisions. In this context, this chapter reviews the standard hybrid approach used to describe these collisions numerically. Since different physical regimes are reached throughout the system evolution, distinct theoretical models must be employed. As a consequence, different numerical codes need to be consistently connected.

We reproduce Figure 1.3 from § 1.3, now emphasizing the numerical steps represented by the bubbles in Figure 2.1. From a physical perspective, this process is described as a collision between two Lorentz-contracted nuclei, followed by QGP production and collective evolution. The subsequent rapid expansion leads to a decrease in temperature until hadronization takes place, followed by final-state particle interactions that continue until detection in the experimental apparatus.

Illustrative schema of the standard hybrid evolution for heavy ion collisions

Figure 2.1. Illustrative schema of the standard hybrid evolution for heavy ion collisions, including the initial state, pre-equilibrium phase, hydrodynamic evolution, particlization, and Boltzmann transport. Figure adapted from Ref. [17].

This physical evolution is now decomposed into the numerical steps shown in Figure 2.1, each corresponding to a different underlying physical theory. The collision between the two nuclei that leads to QGP formation is referred to as the initial state or initial condition. Because the produced matter is far from equilibrium, a pre-equilibrium model is required to drive the system to near-equilibrium, where a hydrodynamic description becomes valid. The hydrodynamic evolution then describes the collective behavior of the matter, covering the QGP phase. However, at a certain stage, determined by the equation of state and freeze-out conditions, the continuous fluid description must be replaced by a microscopic approach. The particlization procedure is the computational step that converts continuous fluid degrees of freedom into discrete particles. Finally, particle interactions continue through a Boltzmann transport approach until the system reaches the detectors.

This chapter is organized such that each section describes in detail the physical theory underlying each numerical step shown in Figure 2.1. Within each section, subsections present the specific codes used in the analyses throughout this dissertation, thereby providing both the necessary background for their understanding and a concise reference for the model parameters discussed in the following chapters.

Initial Condition

The initial condition model aims to take specific nuclear configurations and collision energy as input and provide, as output, an energy or entropy density profile. This profile can be determined in either two or three dimensions. By convention, the zz-axis is defined as the collision axis. In the two-dimensional case, the energy or entropy density deposition is studied in the transverse plane xT=(x,y)\mathbf{x}_{\mathrm{T}} = (x,y), and in the three-dimensional case, the deposition happens on (x,y,ηs)(x,y,\eta_s), where ηs\eta_s is the longitudinal variable explained later in this section.

The first step is to arrange the AA nucleons inside each nucleus, since the collision dynamics depend on the positions of these sources. The nucleon positions can be described using a parametric nucleon density distribution [26], or obtained from ab initio nuclear structure calculations [27]. Then, the geometry of the collision must be determined. This geometry is characterized by the impact parameter bb, defined as the transverse distance between the centers of the two colliding nuclei. A schematic representation is shown in Figure 2.2, where the darker overlapping region corresponds to the interaction zone.

Visual connection between impact parameter, number of participants, centrality bins, fraction of total cross section, and final charged particle multiplicity

Figure 2.2. Visual connection between impact parameter bb, number of participants NpartN_{\mathrm{part}}, centrality bins, the fraction of the total cross section σ/σtot\sigma/\sigma_{\mathrm{tot}}, and the final charged particle multiplicity NchN_{\mathrm{ch}}. More peripheral events correspond to larger centrality values and larger bb, whereas central events are associated with smaller centrality bins and smaller values of bb. The numerical values shown on the scales are illustrative, as they depend on the collision system and beam energy. Figure adapted from Ref. [26].

An event is referred to as central when bb is close to zero, corresponding to an

Initial Condition

almost complete overlap of the nuclei. Conversely, an event is called peripheral when bb is larger and the nuclei overlap only partially. In principle, the impact parameter can vary from zero up to approximately twice the nuclear radius.1 However, this quantity cannot be measured directly in experiments. Instead, experimentalists measure the final number of produced particles and their angular distribution. From these measurements, a histogram can be constructed and divided into centrality classes. Consequently, collisions are categorized according to centrality percentiles, ranging from 0% for the most central events to 100% for the most peripheral events. The relation between the impact parameter and the centrality classes is illustrated in Figure 2.2. This procedure further highlights the importance of performing minimum bias simulations to capture all geometries for comparison with experimental data [29].

The inelastic nucleon–nucleon cross section is used to identify the nucleons that interact during the collision and subsequently contribute to the initial energy density deposition. These are called participants, NpartN_{\mathrm{part}}, while those that pass through without interacting are referred to as spectators. From NpartN_{\mathrm{part}}, the thickness function of each nucleus is calculated, followed by the reduced thickness function, which is proportional to the energy deposition in the collision.

Every initial-state model contains a normalization constant that controls the overall amount of energy deposited after the collision and must be calibrated to reproduce the observed charged-particle multiplicity. In this dissertation, this parameter is referred to as the KK-factor. Its physical interpretation depends on the model under consideration: in more physically motivated approaches, it accounts for small corrections arising from approximations in the theoretical calculations, whereas in parametric models it acts simply as an overall normalization parameter. A more detailed discussion of its calibration and the procedure used to match the final charged multiplicity will be presented in Chapter 3.

When comparing theory, simulations, and experimental data, it is essential to adopt a consistent coordinate system. In high-energy collisions, Milne coordinates are commonly used because they naturally incorporate longitudinal expansion and simplify the description under the assumption of boost invariance. The Milne coordinates (τ,x,y,ηs)(\tau, x, y, \eta_s) are related to Minkowski coordinates (t,x,y,z)(t, x, y, z) through

τ=t2−z2,x=x,y=y,ηs=12ln⁡t+zt−z,(2)\tau= \sqrt{t^2 - z^2}, \qquad x = x, \qquad y = y, \qquad\eta_s = \frac{1}{2} \ln\frac{t+z}{t-z}, \tag*{(2)}

where τ\tau is the proper time and ηs\eta_s is the space-time rapidity. The metric in these coordinates is given by gμν=diag⁡(1,−1,−1,−τ2)g_{\mu\nu} = \operatorname{diag}(1, -1, -1, -\tau^2).

Two additional important kinematic variables are the rapidity yy and the pseudorapidity η\eta:

y=12ln⁡E+pzE−pz,η=−ln⁡(tan⁡θ2)=12ln⁡∣p⃗∣+pz∣p⃗∣−pz,(3)y = \frac{1}{2} \ln\frac{E+p_z}{E-p_z}, \qquad\eta= -\ln\left(\tan\frac{\theta}{2}\right) = \frac{1}{2} \ln\frac{|\vec{p}|+p_z}{|\vec{p}|-p_z}, \tag*{(3)}

where EE is the energy, pp is the momentum of the particle, and pzp_z is the zz component of the momentum. The pseudorapidity is defined in terms of the polar angle θ\theta with respect to the beam axis. This variable is particularly useful in experiments, since θ\theta corresponds directly to the angle measured in detectors. For this reason, final observables are commonly expressed as functions of η\eta, for example, the charged particle multiplicity dNch/dη\mathrm{d}N_{\mathrm{ch}}/\mathrm{d}\eta. It is important to emphasize that quantities in the initial state are functions of the space-time rapidity ηs\eta_s, while final-state observables depend on the pseudorapidity η\eta, which encodes information about both the particle momentum and the measurable emission angle. It is also useful to present the transformation [30] between pseudorapidity η\eta and rapidity yy

η=12ln⁡(mT2cosh⁡2y−m2+mTsinh⁡ymT2cosh⁡2y−m2−mTsinh⁡y),(4)\eta= \frac{1}{2} \ln\left(\frac{\sqrt{m_{\mathrm{T}}^2 \cosh^2 y - m^2} + m_{\mathrm{T}}\sinh y}{\sqrt{m_{\mathrm{T}}^2 \cosh^2 y - m^2} - m_{\mathrm{T}}\sinh y}\right), \tag*{(4)}

where mm is the rest mass and mT=m2+pT2m_{\mathrm{T}} = \sqrt{m^2 + p_{\mathrm{T}}^2} is the transverse mass of the particle.

When two-dimensional profiles are considered, the boost-invariance approximation is typically employed. In this case, the energy density is assumed to be independent of space-time rapidity, such that e(τ,x,y,ηs)=e(τ,x,y)e(\tau, x, y, \eta_s) = e(\tau, x, y). Boost invariance implies that the total transverse energy per unit space-time rapidity is flat. Experimentally, this approximate boost invariance is reflected in the charged-particle multiplicity distribution, which exhibits an almost plateau around midrapidity η∼0\eta\sim0. This behavior characterizes the Bjorken flow [31].

In this dissertation, the characterization of initial quantities from the initial energy density is referred to as “initial observables”. In addition to the total energy, an important set of quantities is given by the spatial eccentricities:

ε1eiΨ1≡−∫r3eiθf(r,θ) r dr dθ∫r3f(r,θ) r dr dθ,εneinΨn≡−∫rneinθf(r,θ) r dr dθ∫rnf(r,θ) r dr dθ,for n>1,(5)\varepsilon_1 e^{i\Psi_1} \equiv-\frac{\int r^3 e^{i\theta} f(r,\theta)\,r\,\mathrm{d}r\,\mathrm{d}\theta}{\int r^3 f(r,\theta)\,r\,\mathrm{d}r\,\mathrm{d}\theta}, \qquad \varepsilon_n e^{in\Psi_n} \equiv-\frac{\int r^n e^{in\theta} f(r,\theta)\,r\,\mathrm{d}r\,\mathrm{d}\theta}{\int r^n f(r,\theta)\,r\,\mathrm{d}r\,\mathrm{d}\theta}, \qquad\text{for } n>1, \tag*{(5)}

where εn\varepsilon_n is the magnitude of the spatial anisotropy (eccentricity), Ψn\Psi_n is the participant-plane angle with respect to the reaction plane, and f(r,θ)f(r,\theta) represents a weight function, typically the energy or entropy density profile. These quantities characterize the initial geometry and fluctuations of the system and are related to the final flow coefficients [32, 33], due to the mechanism discussed previously in Figure 1.4.

Although we refer to the eccentricities as initial observables in this dissertation, it is important to emphasize that they are not directly measured in detectors. Instead, they are initial-state quantities estimated from the energy or entropy density profile, which influence measurable final-state observables such as the flow coefficients.

Finally, there are two main classes of codes used to model initial conditions in heavy ion collisions: parametric and non-parametric models. The latter are based on physical descriptions inspired by the color glass condensate (CGC) framework, which is a QCD-based effective theory applicable in the high-energy regime where gluon saturation effects become important [34]. Examples of such models include IP-Glasma [35, 36] and MC-Dipper [37], the latter of which will be discussed in § 2.2.2. In contrast, parametric models employ a set of parameters to describe the initial energy deposition and are often combined with Bayesian analyses to constrain these parameters efficiently via experimental data. Examples include TRENTo [38] and MC-Glauber [26], the latter of which will be presented in § 2.2.1.

Monte Carlo Glauber

As a parametric model, the Monte Carlo Glauber (MC-Glauber) approach [26,39] uses phenomenological input to model initial energy deposition in a collision based on the eikonal approximation, which assumes straight-line propagation of the colliding nuclei. The model begins by sampling the positions of nucleons inside each nucleus, using a nucleon density described by the Woods–Saxon distribution,

ρ(r⃗)=ρ01+exp⁡{r−Ra}(6)\rho(\vec{r}) = \frac{\rho_0}{1+\exp\left\{\frac{r-R}{a}\right\}} \tag*{(6)}

where ρ0\rho_0 is the nucleon density in the center of the nucleus, RR is the nuclear radius, and aa is the skin depth, two parameters specific to each nucleus.

In the MC-Glauber approach, a nucleon position is randomly sampled within 0≤r≤2R0 \le r \le2R, and the Woods–Saxon distribution is used to determine whether that position is accepted. A minimum inter-nucleon distance of 0.4 fm is enforced. After sampling the nucleon positions, an impact parameter is also sampled as a random number within 0≤b≤2.5R0 \le b \le2.5R. In this dissertation, the impact parameter is fixed along the xx-direction.2 The two nuclei are then shifted such that their centers are located at ±b/2\pm b/2.

The MC-Glauber model uses the geometric criterion d≤σinelNN/πd \le\sqrt{\sigma_{\mathrm{inel}}^{\mathrm{NN}}/\pi} to determine whether a collision occurs between two nucleons. This criterion treats each nucleon–nucleon interaction independently and relies solely on the experimental value of the inelastic nucleon–nucleon cross section σinelNN\sigma_{\mathrm{inel}}^{\mathrm{NN}}. Based on this condition, the number of participants Npart(xT)N_{\mathrm{part}}(\mathbf{x}_{\mathrm{T}}) and the number of binary collisions Ncoll(xˉT)N_{\mathrm{coll}}(\bar{\mathbf{x}}_{\mathrm{T}}) are calculated, where xˉT\bar{\mathbf{x}}_{\mathrm{T}} denotes the average position of the two nucleons involved in each collision. Since these quantities are initially defined as discrete sources at specific spatial points, each source is smeared using a Gaussian profile with width σ=0.4\sigma= 0.4 fm in order to obtain continuous density distributions. The deposited energy density is then taken to be proportional to a linear combination of the participant and collision densities [?]

e(xT)=12(1−α)Npart(xT)+αNcoll(xT),(7)e(\mathbf{x}_{\mathrm{T}}) = \frac{1}{2}(1-\alpha)N_{\mathrm{part}}(\mathbf{x}_{\mathrm{T}}) + \alpha N_{\mathrm{coll}}(\mathbf{x}_{\mathrm{T}}), \tag*{(7)}

with α\alpha which depends on the energy collision, in this dissertation α=0.2\alpha= 0.2. This model does not include any internal substructure of the nucleons. After this procedure, the energy density is multiplied by the normalization KK-factor, which, as discussed previously, is a global multiplicative constant used to reproduce the observed final multiplicity. Finally, the energy density profile is recentered on the computational grid by shifting the center of mass to the center of the grid.

One of the focuses of this dissertation is the study of event-by-event fluctuations in the initial energy density defined above. These fluctuations arise naturally from the random sampling of nucleon positions [?]. In this context, it is also important to introduce the optical limit of the Glauber model. In this approach, individual nucleon positions are not sampled, and therefore, the type of initial-state fluctuations studied in this work is absent. For this reason, the optical model provides a useful baseline for comparison, as will be discussed in Chapter 4.

The optical Glauber model [?, ?] is also based on the eikonal approximation. In this framework, the projectile sees the target as a smooth continuous density, and the discrete nucleon structure is replaced by continuous nuclear densities. The model employs the nuclear thickness function for each nucleus,

T^A,B(x,y)=∫ρA,B(x,y,z) dz,(8)\hat{T}_{A,B}(x,y) = \int\rho_{A,B}(x,y,z)\,\mathrm{d}z, \tag*{(8)}

References

  1. [109]P. Carzon, S. Rao, M. Luzum, M. Sievert, and J. Noronha-Hostler, “Possible octupole deformation of ²⁰⁸Pb and the ultracentral v₂ to v₃ puzzle,” Phys. Rev. C, vol. 102, no. 5, p. 054905, 2020.
  2. [110]H.-j. Xu, D. Xu, S. Zhao, W. Zhao, H. Song, and F. Wang, “Investigation of an octupole breathing mode of ²⁰⁸Pb as a resolution to the elliptical-to-triangular azimuthal anisotropy puzzle in ultracentral relativistic heavy ion collisions,” Phys. Rev. C, vol. 112, no. 5, p. L051901, 2025.DOI
  3. [111]M. Frosini, T. Duguet, J.-P. Ebran, and V. Somà, “Multi-reference many-body perturbation theory for nuclei: I. Novel PGCM-PT formalism,” Eur. Phys. J. A, vol. 58, no. 4, p. 62, 2022.
  4. [112]A. Belyaev et al., “Centrality dependence of charged-hadron pseudorapidity distributions in oxygen-oxygen collisions at √sNN = 5.36 TeV,” 6 2026. arXiv:2606.02285 [nucl-ex].arxiv.org/abs/2606.02285
  5. [113]C. Shen and S. Alzhrani, “Collision-geometry-based 3D initial condition for relativistic heavy-ion collisions,” Phys. Rev. C, vol. 102, no. 1, p. 014909, 2020.
  6. [114]F. G. Gardim, F. Grassi, Y. Hama, M. Luzum, and J.-Y. Ollitrault, “Directed flow at mid-rapidity in event-by-event hydrodynamics,” Phys. Rev. C, vol. 83, p. 064901, 2011.DOI
  7. [115]M. Luzum and J.-Y. Ollitrault, “Directed flow at midrapidity in heavy-ion collisions,” Phys. Rev. Lett., vol. 106, p. 102301, 2011.pubmed.ncbi.nlm.nih.gov/21469787
  8. [116]P. Bozek and I. Wyskiel, “Directed flow in ultrarelativistic heavy-ion collisions,” Phys. Rev. C, vol. 81, p. 054902, 2010.DOI
  9. [117]G. Aad et al., “Measurement of the azimuthal anisotropy of charged particles in √sNN = 5.36 TeV ¹⁶O+¹⁶O and ²⁰Ne+²⁰Ne collisions with the ATLAS detector,” Phys. Rev. C, vol. 113, no. 4, p. 045205, 2026.
  10. [118]J. Noronha-Hostler, L. Yan, F. G. Gardim, and J.-Y. Ollitrault, “Linear and cubic response to the initial eccentricity in heavy-ion collisions,” Phys. Rev. C, vol. 93, no. 1, p. 014909, 2016.
  11. [119]M. D. Sievert and J. Noronha-Hostler, “CERN Large Hadron Collider system size scan predictions for PbPb, XeXe, ArAr, and OO with relativistic hydrodynamics,” Phys. Rev. C, vol. 100, no. 2, p. 024904, 2019.DOI
  12. [120]V. Khachatryan et al., “Evidence for transverse momentum and pseudorapidity dependent event plane fluctuations in PbPb and pPb collisions,” Phys. Rev. C, vol. 92, no. 3, p. 034911, 2015.
  13. [121]W. H. Press, Numerical recipes 3rd edition: The art of scientific computing. Cambridge university press, 2007.
  14. [122]L. Lista, Statistical Methods for Data Analysis. Lecture Notes in Physics, Switzerland: Springer, 2023. [Erratum: Lect.Notes Phys. 1010, C1–C2 (2024)].

Paper details

vlnc:W_hz6c7zhm
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

BIKI

View statement
Looking for related papers…
Contents