betaFeedback

WorksPhysics and Astronomy

Spin-orbit torque generation in NiFe/IrO2 bilayers

Abstract

The 5d transition-metal oxides have a unique electronic structure dominated by strong spin-orbit coupling and hence they can be an intriguing platform to explore spin-current physics. Here, we report on room-temperature generation of spin-orbit torque (SOT) from a conductive 5d iridium oxide, IrO2. By measuring second-harmonic Hall resistance of Ni81Fe19/IrO2 bilayers, we find both dampinglike and fieldlike SOTs. The former is larger than the latter, enabling easier control of magnetization. We also observe that the dampinglike SOT efficiency has a significant dependence on IrO2 thickness, which is well described by the drift-diffusion model based on the bulk spin Hall effect. We deduce the effective spin Hall angle of +0.093 +- 0.003 and the spin-diffusion length of 1.7 +- 0.2 nm. By comparison with control samples Pt and Ir, we show that the effective spin Hall angle of IrO2 is comparable to that of Pt and seven times higher than that of Ir. The fieldlike SOT efficiency has a negative sign without appreciable dependence on the thickness, in contrast to the dampinglike SOT. This suggests that the fieldlike SOT likely stems from the interface. These experimental findings suggest that the uniqueness of the electronic structure of 5d transition-metal oxides is crucial for highly efficient charge to spin-current conversion.

The spin-orbit coupling (SOC) is the relativistic effect that couples the orbital angular momentum of an electron with its spin angular momentum. Nowadays, interfaces with SOC become a rich playground with emergent spin-orbit driven phenomena and the underlying physics [1]. Among them, one of the most highlighted subjects is a current-driven spin-orbit torque (SOT) [2, 3], resulting from charge to spin current conversion. The SOT is generated from either bulk spin Hall effect (SHE) [4] or interface Rashba-Edelstein effect (REE) [5] via the strong SOC. Within the last decade, the SOT has been manifested to give rise to highly efficient magnetization switching [2, 3, 6] and motion of chiral spin textures such as magnetic domain walls [7, 8, 9, 10, 11] and skyrmions [12, 13]. These phenomena have been first demonstrated in 5d5d heavy metal (HM)/ferromagnet (FM) bilayers due to the strong SOC of the 5d5d electrons. The study on SOT has been further extended to a variety of bilayers such as antiferromagnet/FM [14, 15], topological insulator/FM [16, 17], rare earth metal/FM [18, 19], and HM/ferrimagnet [20, 21, 22]. Thus, the SOT has been well established as a powerful tool to investigate the charge to spin current conversion in various material systems.

The strong SOC also plays important role on 5d5d transition-metal oxides due to their unique electronic structures. Their density of states in the vicinity of the Fermi level is dominated by 5d5d electrons with strong SOC, while that in 5d5d HM consists of 5d5d and 6s6s bands. Among 5d5d oxides, conductive IrO2_2 oxides have been actually proven to be ideal materials for spin-current physics; Fujiwara et al observed the inverse SHE in an amorphous IrO2_2 using the non-local spin valve measurement [23]. Since this result indicates an efficient spin to charge conversion, the charge to spin conversion via SOT measurement is anticipated as well. Shortly afterwards, however, the spin Seebeck effect in the amorphous IrO2_2 [24] shows that the inverse SHE is much smaller than one expected from Ref. [23]; whether or not the amorphous IrO2_2 is a potential spintronic compound still remains an open question. It is thus important to investigate the generation of SOT and its underling mechanism in the amorphous IrO2_2.

In this paper, we demonstrate the efficient SOT generation from a conductive IrO2_2. In order to investigate the spin-transport mechanism, we systematically characterize the IrO2_2 thickness dependence of SOT in Ni81_{81}Fe19_{19}|IrO2_2 bilayers using harmonic Hall measurement. The SOT exhibits both dampinglike (DL) and fieldlike (FL) characteristics; the former is well explained by bulk SHE. Effective spin Hall angle of IrO2_2 is comparable with that of Pt and is much larger than that of Ir metal, suggesting that the unique electronic structure inherent to 5d5d orbitals plays a crucial role in spin-transport mechanism.

Sample structures are represented by Sub.|1.5 Ti|4 Ni81_{81}Fe19_{19}|tIrO2_{\mathrm{IrO_2}} IrO2_2, where the numbers indicate layer thickness in nanometer. Thermally oxidized Si is used as a substrate. The thin Ti layer acts as a smoothing layer. Since Ti is a poor conductor and is likely to be oxidized, its influence for electrical measurement is negligible. Ni81_{81}Fe19_{19} also known as permalloy (Py) is a soft ferromagnet with in-plane magnetic anisotropy. The IrO2\mathrm{IrO}_2 layer plays as a SOT source. Ti and Py layers were grown via a radio frequency magnetron sputtering at Ar deposition pressures of 0.2 Pa. Control samples of Sub.|1.5 Ti|4 Py|5 Pt and Sub.|1.5 Ti|4 Py|5 Ir were grown in the same manner. The amorphous IrO2\mathrm{IrO}_2 layer was grown by a reactive sputter method [23, 25] on the Py layer at the rate of Ar:O2_2 = 8:2 in the total deposition pressure of 0.2 Pa. No annealing treatments before/after the deposition were provided. The amorphous state of IrO2\mathrm{IrO}_2 is confirmed by the x-ray diffraction. The IrO2\mathrm{IrO}_2 films are fully oxidized judging from resistivity which is found to be insensitive to O2_2 partial pressure during growth [25]. We change the IrO2\mathrm{IrO}_2 thickness (tt) from 3 to 18 nm. In order to estimate layer thicknesses, the growth rate of a thick film (∼\sim30 nm) were determined for each layer by the x-ray reflectivity beforehand.

Figure 1(a) shows an image of SOT generation in bilayer Py|IrO2\mathrm{IrO}_2. Injection of an ac current IacI_{\mathrm{ac}} induces the SOT and concomitant effective field. The field can be resolved into two components with different symmetries, namely, dampinglike (BDLB_{\mathrm{DL}}) and fieldlike (BFLB_{\mathrm{FL}}) fields. Since direction of accumulated spins at interface is fixed to y direction in our setup, directions of the fields are expressed by BDL∥y×MB_{\mathrm{DL}} \parallel\mathbf{y} \times\mathbf{M}, and BFL∥yB_{\mathrm{FL}} \parallel\mathbf{y} when magnetization M\mathbf{M} is in the sample plane; only the DL-SOT is responsible for magnetization switching [2, 3]. We independently quantify these SOT effective fields not only to demonstrate a path toward spintronic applications but also to better understand an origin of the SOT. Figure 1(b) displays the saturation magnetization MsM_{\mathrm{s}} as a function of IrO2\mathrm{IrO}_2 thickness and MsM_{\mathrm{s}} of Pt and Ir control samples, measured by the superconducting quantum interference device magnetometer. The MsM_{\mathrm{s}} are nearly independent of IrO2\mathrm{IrO}_2 thickness; the values of 6.06.0–6.7×1056.7 \times10^5 A m−1^{-1} are in good agreement with those for typical Py thin films [26, 27]. These values are also comparable to our control samples: Ms=7.3×105M_{\mathrm{s}} = 7.3 \times10^5 A m−1^{-1} for Py|Pt and Ms=6.9×105M_{\mathrm{s}} = 6.9 \times10^5 A m−1^{-1} for Py|Ir. These suggest that degradation of the Py layer by oxidation is negligible. The bilayer films were fabricated into a Hall bar device by photolithography and postdeposition lift-off. 5 Ta|60 Au contact pads were attached at the end of devices for electrical measurements. The Hall bar has channel dimensions of 36 μ\mum length (LL) and 6 μ\mum width (ww) as illustrated in Figure 1(c). The θ\theta and ϕ\phi represents the polar and azimuthal angles, respectively, of the external magnetic field (BextB_{\mathrm{ext}}). The IacI_{\mathrm{ac}} is applied along the x-axis direction to detect Hall resistance (RHR_{\mathrm{H}}) in the y-axis direction and longitudinal resistance (RR) in the x-axis direction. By measuring RR, L/RwL/Rw as a function of tt was plotted in Figure 1(d), showing a linear trend with increase of the tt. From the linear fitting to the data, we estimate resistivities of IrO2\mathrm{IrO}_2 and Py layers to be ρIrO2=370\rho_{\mathrm{IrO}_2} = 370 μΩ\mu\Omegacm and ρPy=85\rho_{\mathrm{Py}} = 85 μΩ\mu\Omegacm, in agreement with previous reports [19, 24, 25, 27]. Assuming the parallel resistor model with these resistivities, the current fraction versus tt [28] was obtained in order to calculate an accurate current density flowing in IrO2\mathrm{IrO}_2. All the measurements were carried out at room temperature using a standard lock-in technique by applying Iac=2Irmssin⁡(2πft)I_{\mathrm{ac}} = \sqrt{2} I_{\mathrm{rms}} \sin(2\pi f t) with frequency f=13f = 13 Hz and a root mean square of current IrmsI_{\mathrm{rms}}.

Schematic illustration of SOTs, saturation magnetization, Hall bar device, and thickness dependence

Figure 1. (a) Schematic illustration of SOTs in Ni81_{81}Fe19_{19} (Py)|IrO2_2 bilayers. The ac current (IacI_{\mathrm{ac}}) drives SOTs acting on magnetization (MM), giving rise to damping-like effective field (BDLB_{\mathrm{DL}}) and field-like effective field (BFLB_{\mathrm{FL}}). (b) Saturation magnetization MSM_{\mathrm{S}} as a function of IrO2_2 thickness and MSM_{\mathrm{S}} of Pt and Ir control samples. (c) Image of a patterned Hall bar device with width w=6w = 6 μm and length L=36L = 36 μm between two branches on transport and harmonic Hall resistance measurement. The θ\theta and ϕ\phi represent the polar and azimuthal angles of the external magnetic field (BextB_{\mathrm{ext}}), respectively. The IacI_{\mathrm{ac}} is applied along the xx-axis direction to detect Hall resistance (RHR_{\mathrm{H}}) in the yy-axis direction and longitudinal resistance (RR) in the xx-axis direction. (d) The IrO2_2 thickness dependence of L/RwL/Rw. The solid line is a linear fit.

We set IrmsI_{\mathrm{rms}} to ~ 50 μA\mu\mathrm{A} for measurements of RR and ~ 1.0–2.0 mA\mathrm{mA} for harmonic Hall measurements; we applied Bext=50B_{\mathrm{ext}}=50–500 mT\mathrm{mT} for the latter measurements as well.

We measure harmonic Hall resistance in order to independently quantify effective fields with DL (BDLB_{\mathrm{DL}}) and FL (BFLB_{\mathrm{FL}}) SOTs [29, 30, 31]. While the first harmonic resistance RH1ωR_{\mathrm{H}}^{1\omega} is equivalent to conventional Hall resistance, the second harmonic resistance RH2ωR_{\mathrm{H}}^{2\omega} provides information about the SOT; an injection of IacI_{\mathrm{ac}} produces SOTs that cause the small modulation of the magnetization about its equilibrium position against magnetic field. In the analysis of the harmonic Hall measurement established by Avci [31], the following relation is used when magnetization sufficiently lies in-plane (θ=90∘\theta=90^\circ):

RH1ω=RPHEsin⁡2ϕ(1)R_{\mathrm{H}}^{1\omega}=R_{\mathrm{PHE}}\sin2\phi \tag*{(1)}
RH2ω=−(RAHEBDLBk+Bext+R∇T)cos⁡ϕ+2RPHEBFL+BOeBext(2cos⁡3ϕ−cos⁡ϕ).(2)R_{\mathrm{H}}^{2\omega}=-\left(R_{\mathrm{AHE}}\frac{B_{\mathrm{DL}}}{B_k+B_{\mathrm{ext}}}+R_{\nabla T}\right)\cos\phi+2R_{\mathrm{PHE}}\frac{B_{\mathrm{FL}}+B_{\mathrm{Oe}}}{B_{\mathrm{ext}}}\left(2\cos^3\phi-\cos\phi\right). \tag*{(2)}
≡RDL+∇Tcos⁡ϕ+RFL+Oe(2cos⁡3ϕ−cos⁡ϕ).(3)\equiv R_{\mathrm{DL}+\nabla T}\cos\phi+R_{\mathrm{FL}+\mathrm{Oe}}\left(2\cos^3\phi-\cos\phi\right). \tag*{(3)}

Here, RPHER_{\mathrm{PHE}}, RAHER_{\mathrm{AHE}}, BkB_k, R∇TR_{\nabla T}, and BOeB_{\mathrm{Oe}} correspond to planar Hall resistance, anomalous Hall resistance, out-of-plane anisotropy field, thermal induced second harmonic resistance, and current induced Oersted field, respectively. Since both the DL and the thermal induced contributions have the same symmetry, they appear in pairs in Eq. (2); it is also the case for the FL and Oersted field contributions. As indicated in Eq. (3), we define RDL+∇TR_{\mathrm{DL}+\nabla T} and RFL+OeR_{\mathrm{FL}+\mathrm{Oe}} as the coefficients of cos⁡ϕ\cos\phi and (2cos⁡3ϕ−cos⁡ϕ)(2\cos^3\phi-\cos\phi) components, which can be separated by the fitting on RH2ωR_{\mathrm{H}}^{2\omega} versus ϕ\phi. In order to extract all the relevant parameters, both RH2ωR_{\mathrm{H}}^{2\omega} and RH1ωR_{\mathrm{H}}^{1\omega} are measured as a function of ϕ\phi with different BextB_{\mathrm{ext}}.

First we present that the SOT is really observed in the Py|IrO2_2 bilayers. Figure 2(a) shows RH1ωR_{\mathrm{H}}^{1\omega} as a function of ϕ\phi for 4 Py|12 IrO2_2 with Bext=100B_{\mathrm{ext}}=100 mT (blue open circle) and 300 mT (pink open circle). The amplitudes of RH1ωR_{\mathrm{H}}^{1\omega} were found to be independent of BextB_{\mathrm{ext}}, indicating fully saturated magnetization in in-plane xyxy axis; RPHE=0.28 ΩR_{\mathrm{PHE}}=0.28\ \Omega was obtained as the fitting results (pink and blue curves) in accordance with Eq. (1). Figure 2(b) shows RH2ωR_{\mathrm{H}}^{2\omega} simultaneously measured with RH1ωR_{\mathrm{H}}^{1\omega}. In contrast to RH1ωR_{\mathrm{H}}^{1\omega}, the raw data of RH2ωR_{\mathrm{H}}^{2\omega} (top panel) has a significant suppression by larger BextB_{\mathrm{ext}}, reflecting the modulation of SOT. Fits to the data according to Eq. (2) are shown as solid curves for DL (middle panel) and FL contributions (bottom panel) which correspond to cos⁡ϕ\cos\phi and 2cos⁡3ϕ−cos⁡ϕ2\cos^3\phi-\cos\phi components, respectively. Since these curves also have clear suppression by the larger BextB_{\mathrm{ext}}, both DL and FL SOTs induced by current are experimentally confirmed. For control samples of Pt and Ir, the corresponding results on RH2ωR_{\mathrm{H}}^{2\omega} with Bext=100B_{\mathrm{ext}}=100 mT are shown in Figure 2(c) and (d). With the apparent signals (blue clear symbol), the data was fitted by the blue curve using Eq. (2). The solid and dotted curves indicate separated DL and FL contributions, respectively. As displayed in Figure 2(b)–(Figure 2d), the RH2ωR_{\mathrm{H}}^{2\omega} for both DL and FL contributions have the same sign for IrO2_2, Pt, and Ir.

Four-panel harmonic Hall resistance measurements for IrO₂ and Pt devices

Figure 2. (a) RH1ωR_{\mathrm{H}}^{1\omega} of 4 Py|12 IrO₂ device measured at 100 mT (blue open circle) and 300 mT (pink open circle) (b) RH2ωR_{\mathrm{H}}^{2\omega} of 4 Py|12 IrO₂ measured at 100 mT and 300 mT for raw data (top panel). The solid curves are fits to the data using Eq. (2). Separated cos⁡ϕ\cos\phi and (2cos⁡3ϕ−cos⁡ϕ)(2\cos^{3}\phi-\cos\phi) components from RH2ωR_{\mathrm{H}}^{2\omega} indicate DL contribution and FL contribution, respectively. (c) 4 Py|5 Pt and (d) 4 Py|5 Ir measured at 100 mT for raw data (blue open circle) and the separation of DL (blue solid curve) and FL (blue dotted curve) contributions. The blue solid curves are fits to the data using Eq. (2).

Next we extract two SOT effective fields BDLB_{\mathrm{DL}} and BFLB_{\mathrm{FL}} through the coefficients RDL+∇TR_{\mathrm{DL}+\nabla T} and RFL+OeR_{\mathrm{FL}+\mathrm{Oe}}. The material parameters RPHER_{\mathrm{PHE}}, RAHER_{\mathrm{AHE}}, and BkB_k were independently evaluated; RPHER_{\mathrm{PHE}} has been already known from RH1ωR_{\mathrm{H}}^{1\omega} as state above while RAHER_{\mathrm{AHE}} and BkB_k were estimated by applying BextB_{\mathrm{ext}} along zz-axis direction (at θ=0∘\theta= 0^{\circ}) as shown in [28]. Figure 3(a)-(Figure 3c) display the estimated RDL+∇T/RAHER_{\mathrm{DL}+\nabla T}/R_{\mathrm{AHE}} and RFL+Oe/RPHER_{\mathrm{FL}+\mathrm{Oe}}/R_{\mathrm{PHE}} for 4 Py|12 IrO2_2, which indicate a linear dependence on 1/(Bext+Bk)1/(B_{\mathrm{ext}}+B_k) or 1/Bext1/B_{\mathrm{ext}}, respectively. This suggests that our data is well explained by Eq. (3). The corresponding results of Pt and Ir control samples are displayed in [28]. Since the slope shown in Figure 3(a) is quite small, we display the magnified data in Figure 3(b) to clearly observe the slope equal to BDLB_{\mathrm{DL}}. This confirms that there is an evident DL-SOT contribution despite of the significant thermal contribution from the anomalous Nernst effect [32] and/or the spin Seebeck effect [33]. The DL-SOT and thermal contribution were extracted by a linear fit to the data, yielding the value of slope for BDLB_{\mathrm{DL}} and yy-axis interception for R∇T/RAHER_{\nabla T}/R_{\mathrm{AHE}}. In order to understand the large thermal effect of our samples, the thickness dependence of current fraction and R∇TR_{\nabla T} was carefully examined [28]. We find that large thermal effect in Py|IrO2_2 is mainly caused by the highly resistive IrO2_2 with respect to Py, showing good agreement with HMs|FM with contrasting resistivities [31]. With a linear fit to the data in Figure 3(c), BFL+OeB_{\mathrm{FL}+\mathrm{Oe}} for FL contribution was also obtained; we reached BFLB_{\mathrm{FL}} by subtracting the contribution of BOeB_{\mathrm{Oe}} in accordance with simplified Ampere’s law through IIrO2/2wI_{\mathrm{IrO}_2}/2w, where IIrO2I_{\mathrm{IrO}_2} is the charge current flowing in IrO2_2. By considering JIrO2=IIrO2/(t⋅w)J_{\mathrm{IrO}_2}=I_{\mathrm{IrO}_2}/(t\cdot w), we estimate effective fields per current density flowing in IrO2_2 defined as BDL(FL)/JIrO2B_{\mathrm{DL(FL)}}/J_{\mathrm{IrO}_2}. The BDL/JIrO2B_{\mathrm{DL}}/J_{\mathrm{IrO}_2} and BFL/JIrO2B_{\mathrm{FL}}/J_{\mathrm{IrO}_2} were thus determined to be +1.04±0.12+1.04 \pm0.12 mT/(101110^{11} Am−2^{-2}) and −0.19±0.02-0.19 \pm0.02 mT/(101110^{11} Am−2^{-2}), respectively in case of 4 Py|12 IrO2_2. The SOT effective fields per JIrO2J_{\mathrm{IrO}_2} as a function of thickness and the corresponding results of control samples are displayed in Figure 3(d) and (e), respectively. We define JJ as a charge current density in IrO2_2, Pt, or Ir there. All the material parameters used in this analysis such as BkB_k, RAHER_{\mathrm{AHE}}, and RPHER_{\mathrm{PHE}} with various thickness are summarized as shown in [28]. We observe sizable SOT effective fields, indicating that all of IrO2_2, Pt, and Ir act on magnetization of Py films. We also note that the sign of DL-SOT for IrO2_2 is positive and hence the same with that for Pt and Ir, whereas the FL-SOT for IrO2_2 has a negative sign in contrast to a positive sign for Pt and Ir. These SOT effective fields including their signs will be a starting point for future discussion on spin-transport mechanism of IrO2_2 based on its electronic structure.

Thickness dependence of spin–orbit torque parameters

Figure 3. (a) Obtained RDL+∇T/RAHER_{\mathrm{DL}+\nabla T}/R_{\mathrm{AHE}} as a function of 1/(Bext+Bk)1/(B_{\mathrm{ext}}+B_k) in 4 Py|12 IrO2\mathrm{IrO}_2 sample. (b) Magnified view of the data in (a). (c) Obtained RFL+Oe/2RPHER_{\mathrm{FL}+\mathrm{Oe}}/2R_{\mathrm{PHE}} as a function of 1/Bext1/B_{\mathrm{ext}}. The red solid lines represent linear fits. Thickness dependence of (d) BDL/JB_{\mathrm{DL}}/J and (e) BFL/JB_{\mathrm{FL}}/J and BOe/JB_{\mathrm{Oe}}/J. Dotted lines indicate guide to the eye.

Finally we evaluate the efficiency of the SOTs (ξ\xi) with DL and FL characteristics in accordance with the following relation [34]

ξDL(FL)=2eMStFMℏBDL(FL)J(4)\xi_{\mathrm{DL(FL)}} = \frac{2eM_{\mathrm{S}}t_{\mathrm{FM}}}{\hbar}\frac{B_{\mathrm{DL(FL)}}}{J} \tag*{(4)}

where, ee, tFMt_{\mathrm{FM}}, and ℏ\hbar represent the elementary charge, the ferromagnet thickness, and the Dirac constant, respectively. Based on the experimental results of SOTs fields [Figure 3(d)-(Figure 3e)] and various MSM_{\mathrm{S}} on tt [Figure 1(b)], the ξDL\xi_{\mathrm{DL}} and ξFL\xi_{\mathrm{FL}} as a function of tt were obtained in Figure 4(a)-(Figure 4b). It was found that ξDL\xi_{\mathrm{DL}} is enhanced with increasing the thickness and gets saturated at thick regime, spanning the range in 0.064–0.104. Assuming constant values in resistivity, effective spin Hall angle θSHeff\theta_{\mathrm{SH}}^{\mathrm{eff}}, and the spin diffusion length λ\lambda, we use the drift-diffusion model indicated by the following formula [26]:

DL-SOT and FL-SOT efficiency as a function of IrO₂ thickness

Figure 4. (a) DL-SOT efficiency and (b) FL-SOT efficiency as a function of IrO₂ thickness, and of Pt and Ir control samples. The red solid curve denotes the fitting result based on the drift-diffusion model in Eq. (5).

ξDL=θSHeff[1−sech⁡(tλ)].(5)\xi_{\mathrm{DL}}=\theta_{\mathrm{SH}}^{\mathrm{eff}}\left[1-\operatorname{sech}\left(\frac{t}{\lambda}\right)\right]. \tag*{(5)}

The thickness-dependent DL-SOT efficiency is well described by the model based on the bulk SHE, providing the θSH,IrO2eff=+0.093\theta_{\mathrm{SH},\mathrm{IrO_2}}^{\mathrm{eff}}=+0.093 and λIrO2=1.7\lambda_{\mathrm{IrO_2}}=1.7 nm with the fitting curve in Figure 4(a). Using λPt=1.4\lambda_{\mathrm{Pt}}=1.4 nm [35] and λIr=1.0\lambda_{\mathrm{Ir}}=1.0 nm [36], θSH,Pteff=+0.103\theta_{\mathrm{SH},\mathrm{Pt}}^{\mathrm{eff}}=+0.103 and θSH,Ireff=+0.014\theta_{\mathrm{SH},\mathrm{Ir}}^{\mathrm{eff}}=+0.014 for control samples were extracted, showing agreement with previous studies [30, 36]. The estimated θSHeff\theta_{\mathrm{SH}}^{\mathrm{eff}} of IrO2_2 is thus almost the same as that of Pt and much higher than that of Ir.

The FL-SOT efficiency ξFL\xi_{\mathrm{FL}} ranges from −0.013 to −0.028 as displayed in Figure 4(b). These values are much smaller than those for the above-mentioned DL-SOT. This indicates that IrO2_2 is favorable for magnetization control since the DL-SOT is proven to be effective in switching magnetization [2, 3]. The sign of ξFL\xi_{\mathrm{FL}} is negative, apparently opposite to that of ξDL\xi_{\mathrm{DL}}. In spite of some experimental uncertainties in the absolute values, ξFL\xi_{\mathrm{FL}} can be independent of the thickness. If the bulk SHE scenario is the case, ξFL\xi_{\mathrm{FL}} would have the positive sign with thickness dependence similar to that of ξDL\xi_{\mathrm{DL}}. We thus suppose that the FL-SOT is attributed to be the interfacial effect. In some of the metallic bilayer films, the interfacial effect such as the REE can give rise to FL-SOT with the opposite sign to that of DL-SOT [35, 37, 38] and with the thickness-independent behavior [39, 40]. If we assume that our film thickness is sufficiently larger than the length scale of the interface, no thickness dependence is expected. Based on the similarity between our result and the previous reports [35, 37, 38, 39, 40], we speculate that the REE is the possible origin of the generation of FL-SOT.

We now concentrate on the discussion of the DL-SOT efficiency observed in our Py|IrO2_2 bilayers. The enhanced effective spin Hall angle of IrO2_2 seven times larger than that of Ir metal signifies that IrO2_2 is not a degraded Ir metal but has a qualitatively different characteristics suitable for spin-transport properties. This strongly suggests the importance of 5d5d electrons in IrO2_2; its density of states in the vicinity of the Fermi level is dominated by 5d5d electrons with strong SOC, while that of Ir metal consists of 5d5d and 6s6s electrons. While this unique electronic structure has been already related to the spin transport [23], our results provide more robust evidences since both IrO2_2 and Ir are compared under the same experimental setups. In contrast to the inverse SHE used in Ref. [23], the obtained DL-SOT here is due to SHE and hence the uniqueness of 5d5d oxides is supported in a different manner. The value of θSH,IrO2eff=+0.093\theta_{\mathrm{SH},\mathrm{IrO_2}}^{\mathrm{eff}}=+0.093 is roughly consistent with 0.065 obtained from inverse SHE [23] considering that the two data obtained by different experimental techniques do not necessarily coincide with each other due to different contribution from the interfaces. The effective spin Hall angle comparable with Pt also provides that IrO2\mathrm{IrO}_2 is a promising compound for spintronics in addition to the uniqueness. Ir oxides as spintronic materials have been already suggested [23] but have been questioned [24]; our results established that the former is the case even in the amorphous state without well-defined band structure, emphasizing the role of 5d5d electrons in spintronics. In order to gain deep insight on the SOTs of 5d5d oxides, further study focusing on their electronic structure is required. Since complex Ir oxides have been widely examined due to the discovery of emergent electronic phases such as the correlated Dirac semimetal [41, 42, 43], the topological Weyl semimetal [44, 45], and spin-orbital Mott insulator [46, 47], these can be a good candidate for pursuing intriguing spin-current properties. Indeed SrIrO3\mathrm{SrIrO}_3 thin films have been very recently utilized for efficient SOT generation [48, 49]. Together with them, our results will open up a way for oxide spintronics using 5d5d electron systems.

In conclusion, we have demonstrated an efficient room-temperature generation of SOTs in bilayers Py∣IrO2\mathrm{Py}\mid\mathrm{IrO}_2 by measuring harmonic Hall resistance with various IrO2\mathrm{IrO}_2 thickness. We also characterized two spin transport properties of IrO2\mathrm{IrO}_2: effective spin Hall angle and spin diffusion length. The thickness dependence of SOTs reveals that DL-SOT is dominated by the bulk SHE. The large effective spin Hall angle of IrO2\mathrm{IrO}_2 not only support the significance of 5d5d electrons in the SOT generation but demonstrate the possibility of efficient room-temperature spintronics based on 5d5d transition-metal oxides. Towards further understanding of the charge to spin current conversion, our findings will inspire future works on the other Ir oxides with a variety of the electronic structures; significant enhancement of SHE is indeed predicted based on the unique electronic structures of Ir oxides [50, 51].

Acknowledgements

The authors thank T. Arakawa for technical support and fruitful discussion. This work was carried out at the Center for Advanced High Magnetic Field Science in Osaka University under the Visiting Researcher's Program of the Institute for Solid State Physics, the University of Tokyo. This work was partly supported by Japan Society for the Promotion of Science Grant-in-Aid for Young Scientists (Grant No. 19K15434), Scientific Research (B) (Grant No. 17H02791), and JPMJCR1901 (JST-CREST). We acknowledge the stimulated discussion in the meeting of the Cooperative Research Project of the Research Institute of Electrical Communication, Tohoku University.

References

  1. [1]Y. Otani, M. Shiraishi, A. Oiwa, E. Saitoh, S. Murakami, Nat. Phys. 13, 829 (2017).
  2. [2]I. M. Miron, K. Garello, G. Gaudin, P.-J. Zermatten, M. V. Costache, S. Auffret, S. Bandiera, B. Rodmacq, A. Schuhl, and P. Gambardella, Nature 476, 189 (2011).
  3. [3]L. Liu, C.-F. Pai, Y. Li, H. W. Tseng, D. C. Ralph, and R. A. Buhrman, Science 336, 555 (2012).
  4. [4]A. Hoffmann, IEEE Trans. Magn. 49, 5172 (2013).
  5. [5]V. M. Edelstein, Solid State Commun. 73, 233 (1990).
  6. [6]C.-F. Pai, L. Liu, Y. Li, H. W. Tseng, D. C. Ralph, and R. A. Buhrman, Appl. Phys. Lett. 101, 122404 (2012).
  7. [7]S. Emori, U. Bauer, S. M. Ahn, E. Martinez, and G. S. D. Beach, Nat. Mater. 12, 611 (2013).
  8. [8]K.-S. Ryu, L. Thomas, S.-H. Yang, and S. S. P. Parkin, Nat. Nanotechnol. 8, 527 (2013).
  9. [9]J. Torrejon, J. Kim, J. Sinha, S. Mitani, M. Hayashi, M. Yamanouchi, and H. Ohno, Nat. Commun. 5, 4655 (2014).
  10. [10]K. Ueda, K.J. Kim, Y. Yoshimura, R. Hiramatsu, T. Moriyama, D. Chiba, H. Tanigawa, T. Suzuki, E. Kariyada, and T. Ono, Appl. Phys. Express 7, 053006 (2014).
  11. [11]K. Ueda, K. J. Kim, T. Taniguchi, T. Tono, T. Moriyama, T. Ono, Phys. Rev. B 91, 060405(R) (2015).
  12. [12]W. Jiang, P. Upadhyaya, W. Zhang, G. Yu, M. B. Jungfleisch, F. Y. Fradin, J. E. Pearson, Y. Tserkovnyak, K.L. Wang, O. Heinonen, S.G.E. te Velthuis, and A. Hoffmann, Science 349, 283 (2015).
  13. [13]S. Woo, K. Litzius, B. Krüger, M.-Y. Im, L. Caretta, K. Richter, M. Mann, A. Krone, R. Reeve, M. Weigand, P. Agrawal, P. Fischer, M. Kläui, and G. S. D. Beach, Nat. Mater.15, 501 (2016).
  14. [14]S. Fukami, C. Zhang, S. DuttaGupta, A. Kurenkov, and H. Ohno, Nat. Mater. 15, 535 (2016).
  15. [15]Y.-W. Oh, S.-h. C. Baek, Y. M. Kim, H. Y. Lee, K.-D. Lee, C.-G. Yang, E.-S. Park, K.-S. Lee, K.-W. Kim, G. Go et al., Nat. Nanotechnol. 11, 878 (2016).
  16. [16]A. R. Mellnik, J. S. Lee, A. Richardella, J. L. Grab, P.J. Mintun, M.H. Fischer, A. Vaezi, A. Manchon, E.-A. Kim, N. Samarth, and D. C. Ralph, Nature (London) 511, 449 (2014).
  17. [17]K. Kondou, R. Yoshimi, A. Tsukazaki, Y. Fukuma, J. Matsuno, K.S. Takahashi, M. Kawasaki, Y. Tokura, and Y. Otani, Nat. Phys. 12, 1027 (2016).
  18. [18]K. Ueda, C. F. Pai, A. J. Tan, M. Mann, G. S. D. Beach, Appl. Phys. Lett. 108, 232405 (2016).
  19. [19]N. Reynolds, P. Jadaun, J. T. Heron, C.L. Jermain, J. Gibbons, R. Collette, R. A. Buhrman, D. G. Schlom, and D. C. Ralph, Phys. Rev. B 95, 064412 (2017).
  20. [20]J. Finley and L. Liu, Phys. Rev. Appl. 6, 054001 (2016).
  21. [21]K. Ueda, M. Mann, P. W. P. de Brouwer, D. Bono, and G. S. D. Beach, Phys. Rev. B 96, 064410 (2017).
  22. [22]R. Mishra, J. Yu, X. Qiu, M. Motapothula, T. Venkatesan, and H. Yang, Phys. Rev. Lett. 118, 167201 (2017).
  23. [23]K. Fujiwara, Y. Fukuma, J. Matsuno, H. Idzuchi, Y. Niimi, Y. Otani, and H. Takagi, Nat. Commun. 4, 2893 (2013).
  24. [24]Z. Qiu, D. Hou, T. Kikkawa, K.-I. Uchida, and E. Saitoh, Appl. Phys. Express 8, 083001 (2015).
  25. [25]T. Ishikawa, Y. Abe, M. Kawamura, and K. Sakai, Jpn. J. Appl. Phys. 42, 213 (2003).
  26. [26]L. Liu, T. Moriyama, D. C. Ralph, R. A. Buhrman, Phys. Rev. Lett. 106, 036601 (2011).
  27. [27]T. Nan, S. Emori, C.T. Boone, X. Wang, T. M. Oxholm, J.G. Jones, B.M. Howe, G.J. Brown, and N.X. Sun, Phys. Rev. B 91, 214416 (2015).
  28. [28]See the Supplemental Material for the supporting experimental results
  29. [29]J. Kim, J. Sinha, M. Hayashi, M. Yamanouchi, S. Fukami, T. Suzuki, S. Mitani, and H. Ohno, Nat. Mater. 12, 240 (2013).
  30. [30]K. Garello, I. M. Miron, C. O. Avci, F. Freimuth, Y. Mokrousov, S. Blügel, S. Auffret, O. Boulle, G. Gaudin, and P. Gambardella, Nat. Nanotechnol. 8, 587 (2013).
  31. [31]C. O. Avci, K. Garello, M. Gabureac, A. Ghosh, A. Fuhrer, S. F. Alvarado, and P. Gambardella, Phys. Rev. B 90, 224427 (2014).
  32. [32]G. E. Bauer, E. Saitoh, and B. J. van Wees, Nat. Mater. 11, 391 (2012).
  33. [33]K. Uchida, S. Takahashi, K. Harii, J. Ieda, W. Koshibae, K. Ando, S. Maekawa, and E. Saitoh, Nature (London) 455, 778 (2008).
  34. [34]A. V. Khvalkovskiy, V. Cros, D. Apalkov, V. Nikitin, M. Krounbi, K. A. Zvezdin, A. Anane, J. Grollier, and A. Fert, Phys. Rev. B 87, 020402(R) (2013).
  35. [35]C. F. Pai, Y. X. Ou, L. H. Vilela-Leao, D. C. Ralph, and R. A. Buhrman, Phys. Rev. B 92, 064426 (2015).
  36. [36]Y. Ishikuro, M. Kawaguchi, N. Kato, Y.-C. Lau, and M. Hayashi, Phys. Rev. B 99, 134421 (2019).
  37. [37]Y. Ou, C. F. Pai, S. Shi, D. C. Ralph, and R. A. Buhrman, Phys. Rev. B 94, 140414(R) (2016).
  38. [38]S. Karube, N. Tezuka, M. Kohda, and J. Nitta, Phys. Rev. Appl. 13, 024009 (2020).
  39. [39]Y. Takeuchi, C. Zhang, A. Okada, H. Sato, S. Fukami, and Hideo Ohno, Appl. Phys. Lett. 112, 192408 (2018).
  40. [40]A. Ghosh, K. Garello, C. O. Avci, M. Gabureac, and P. Gambardella, Phys. Rev. Appl. 7, 014004 (2017).
  41. [41]Y. F. Nie, P. D. C. King, C. H. Kim, M. Uchida, H. I. Wei, B. D. Faeth, J. P. Ruf, J. P. C. Ruff, L. Xie, X. Pan, C. J. Fennie, D. G. Schlom, and K. M. Shen, Phys. Rev. Lett. 114, 016401 (2015).
  42. [42]D. Hirai, J. Matsuno, D. Nishio-Hamane, and H. Takagi, Appl. Phys. Lett. 107, 012104 (2015).
  43. [43]Z. T. Liu, M. Y. Li, Q. F. Li, J. S. Liu, W. Li, H. F. Yang, Q. Yao, C. C. Fan, X. G. Wan, Z. Wang, and D. W. Shen, Sci. Rep. 6 30309 (2016)
  44. [44]T. C. Fujita, Y. Kozuka, M. Uchida, A. Tsukazaki, T. Arima, and M. Kawasaki, Sci. Rep. 5 9711 (2015).
  45. [45]J. C. Gallagher, B. D. Esser, R. Morrow, S. R. Dunsiger, R. E. A. Williams, P. M. Woodward, D. W. McComb, and F. Y. Yang, Sci. Rep. 6 22282 (2016).
  46. [46]J. Matsuno, K. Ihara, S. Yamamura, H. Wadati, K. Ishii, V. V. Shankar, H.-Y. Kee, and H. Takagi, Phys. Rev. Lett. 114, 247209 (2015).
  47. [47]D. J. Groenendijk, C. Autieri, J. Girovsky, M. Carmen Martinez-Velarte, N. Manca, G. Mattoni, A. M. R. V. L. Monteiro, N. Gauquelin, J. Verbeeck, A. F. Otte, M. Gabay, S. Picozzi, and A. D. Caviglia, Phys. Rev. Lett. 119, 256403 (2017).
  48. [48]A. S. Everhardt, Mahendra DC, X. Huang, S. Sayed, T. A. Gosavi, Y. Tang, C.-C. Lin, S. Manipatruni, I. A. Young, S. Datta, J.-P. Wang, and R. Ramesh, Phys. Rev. Mater. 3, 051201 (2019).
  49. [49]T. Nan. T. J. Anderson, J. Gibbons, K. Hwang, N. Campbell, H. Zhou, Y. Q. Dong, G. Y. Kim, D. F. Shao, T. R. Paudel, N. Reynolds, X. J. Wang, N. X. Sun, E. Y. Tsymbal, S. Y. Choi, M. S. Rzchowski, Y. B. Kim, D. C. Ralph, and C. B. Eom, Proc. Natl. Acad. Sci. U. S. A. 116, 16186 (2019).
  50. [50]Y. Sun, Y. Zhang, C.-X. Liu, C. Felser, and B. Yan Phys. Rev. B 95, 235104 (2017).
  51. [51]P. Jadauna, L. F. Registera, and S. K. Banerjeea, Proc. Natl. Acad. Sci. U. S. A. 117, 11878 (2020).

Paper details

vlnc:W_j6eev969
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 1

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents