WorksPhysics and Astronomy
Data-Efficient Adaptation of DPA-4 Force Fields to DFT+U Energetics: A Case Study in NiO
Abstract
Foundation machine-learned force fields (MLFFs) are often pretrained on broad materials datasets whose electronic-structure conventions may not reproduce the phase energetics required for a specific correlated material. Using NiO as a case study, we examine whether incorrect source-level phase energetics can be corrected efficiently through target-level fine-tuning. Along a common structural interpolation, non-spin-polarized PBE and ferromagnetic PBE+U predict opposite energetic orderings of the octahedral Oct and square-planar Sqr phases. Pretrained DPA-4 models adapt rapidly to the NiO PBE+U surface, reaching energy and force root-mean-square errors (RMSEs) of approximately 0.5 meV/atom and 30 meV/Å, respectively, with approximately 170 PBE+U labels. Crucially, models previously fine-tuned to the opposing no-U surface recover the qualitative PBE+U phase ordering with nearly the same target-data efficiency as models fine-tuned directly from their respective pretrained initializations. Our results show that incorrect source-level phase energetics can be reversed through target-level fine-tuning, and suggest a practical multi-fidelity strategy in which pretraining prioritizes broad, consistent, and affordable data, while compact target-level datasets impose energetics through application-specific fine-tuning.
Introduction
In transition-metal compounds, conventional semilocal density-functional theory (DFT) may over-delocalize the electrons and inadequately describe the associated magnetic moments. Corrective approaches such as DFT+ are therefore frequently employed to improve the description of localization, magnetism, and relative phase energetics [1, 2, 3]. In some cases, these corrections are not merely quantitative. The relative stability of competing crystal structures can be sensitive to the treatment of localized electronic states, and the inclusion or choice of an on-site interaction can even reverse their energetic ordering [4, 5, 6]. A machine-learned force field (MLFF) trained on uncorrected DFT calculations will generally inherit the corresponding reference-level errors and may consequently predict incorrect phase stability.
Nevertheless, using DFT+ for large-scale MLFF pretraining may introduce a separate difficulty. Commonly used materials databases, such as Materials Project (MP) [7, 8], Alexandria [9, 10] and OMat24 [11] may combine calculations performed under composition-dependent DFT and DFT+ conventions [3, 12]. Although these conventions were often designed to improve agreement between calculated and experimental thermodynamics for transition-metal compounds, they effectively mix labels generated by different Hamiltonians into a single training set. Consequently, an MLFF must reconcile potentially incompatible energetic descriptions across chemical environments, which may lead to non-physical interpolation. Recent work [13] has investigated the effect of such dataset inconsistency in depth and argued that consistently generated data without could be more suitable for pretraining foundation MLFFs than datasets containing heterogeneous conventions.
This proposal naturally suggests a separation of roles between pretraining and system-specific fine-tuning. During pretraining, an MLFF learns broadly transferable chemical interactions from an affordable and consistently parameterized reference DFT dataset. Quantitative energetics for a particular correlated material can subsequently be imposed through fine-tuning with a compact dataset at a more appropriate theory level, such as DFT+ or hybrid-functional DFT. For this strategy to be practically useful, an MLFF pretrained without must remain adaptable even when its pretraining encodes qualitatively incorrect phase energetics. Our previous work demonstrated that foundation MLFFs can be fine-tuned for specific materials with remarkable data efficiency [14]. However, it remains unclear whether prior fine-tuning to an incorrect potential-energy surface impedes subsequent adaptation, and whether a small target dataset can efficiently reverse a strongly learned energetic preference.
Here, we investigate these questions using NiO, an archetypal strongly correlated transition-metal oxide, as a case study. We consider a rocksalt-like structure with octahedrally coordinated Ni, denoted Oct, and a PdO-like tetragonal structure with square-planar Ni coordination, denoted Sqr (Figure 1). Along a common structural interpolation between these phases, non-spin-polarized PBE and spin-polarized PBE+ predict opposite relative energetics. The PBE+ trend is qualitatively supported by HSE06 and is preserved under both ferromagnetic (FM) and antiferromagnetic (AFM) ordering. This pronounced reversal provides a stringent test of whether an MLFF carrying an incorrect source-level energetic preference can be efficiently adapted to a target-level surface.
Figure 1. Crystal structures of NiO with octahedral (Oct) and square-planar (Sqr) Ni coordination. The upper row shows the conventional rocksalt-like cubic cell of Oct-NiO containing four formula units (left) and the conventional PdO-like tetragonal cell of Sqr-NiO containing two formula units (right). The lower row shows the corresponding triclinic cells of Oct-NiO (left) and Sqr-NiO (right), each containing two formula units. The two-formula-unit triclinic cells were used for the structural interpolation and as the parent cells for constructing the AIMD supercells.
We fine-tune several pretrained DPA models[15, 16] using a NiO dataset generated with ferromagnetic PBE+ under consistent computational settings. With 170 training configurations, the fine-tuned models reproduce the PBE+ energies, forces, virials, and the Oct–Sqr phase ordering. For the DPA-4 models, fine-tuning reduces the energy root-mean-square error (RMSE) from approximately 15–20 meV/atom to below 0.5 meV/atom and the force RMSE from approximately 125–175 meV/Å to below 30 meV/Å. Most importantly, DPA-4 models previously fine-tuned on non-spin-polarized PBE data, and therefore encoded the opposite Oct–Sqr energetic preference, can be transferred to the ferromagnetic PBE+ surface with nearly the same data efficiency as models fine-tuned directly from the corresponding pretrained initialization.
Our results demonstrate that incorrect source-level phase energetics do not necessarily make a pretrained MLFF unsuitable for subsequent target-level adaptation. More broadly, they suggest a practical multi-fidelity strategy for developing and using foundation MLFFs. Pretraining can prioritize broad configurational coverage, consistency of the DFT labels, and computational affordability, whereas compact target-level datasets can provide the electronic and energetic fidelity required for a specific application. This suggestion does not imply that arbitrary source-level errors are harmless. Rather, the present NiO example shows that target-level phase ordering need not be reproduced during pretraining for the resulting MLFF representation to remain useful. Foundation MLFFs should therefore be regarded as transferable priors that require target-specific validation and, where necessary, appropriate target-level fine-tuning.
Methods
DFT calculations
All DFT calculations, including structural relaxations and single-point calculations, were carried out using the Vienna ab initio Simulation Package (VASP) with the projector-augmented-wave (PAW) method[17, 18, 19, 20]. A plane-wave cutoff of 520 eV was used. Input files were generated using the default PBE_52 pseudopotentials provided through pymatgen [21], with Ni 3p electrons treated as valence electrons. Electronic convergence was set to eV/atom, and ionic steps were converged to 0.02 eV/Å for all structural relaxations. For all DFT+ calculations, we consistently employed the rotationally invariant form introduced by Dudarev et al.[22] with eV applied to the Ni 3d orbitals, following the convention implemented in pymatgen.
In order to compare Oct–Sqr energetics under different correlation treatments, we employed PBE[23, 24], PBE+, r2SCAN[25] and HSE06[26]. No additional Hubbard correction was applied to r2SCAN and HSE06. In these computations, we used triclinic cells containing two NiO formula units (Figure 1, lower panels), and applied a -centered -point mesh. The Oct and Sqr endpoint structures were first relaxed using non-spin-polarized PBE without U. Intermediate configurations were then generated by linearly interpolating both the atomic coordinates and lattice matrices. The resulting fixed interpolation pathway was evaluated using single-point calculations at each electronic-structure level.
To obtain PBE and FM PBE+-level datasets for fine-tuning MLFFs, we performed ab initio molecular dynamics (AIMD) in the isothermal–isobaric (NPT) ensemble at , 600, 900 K and bar. Both the cell volume and the cell shape were allowed to vary. The AIMD trajectories were propagated using the Langevin thermostat and barostat, with lattice friction coefficients of and a fictitious lattice mass of 1000 atomic mass units. At each temperature, we performed two simulations, initialized from the Oct and the Sqr structures, respectively. Each simulation lasted 250 steps with a time step of 4.0 fs. From the resulting PBE trajectories of the Oct and the Sqr phases, we extracted 750 electronically converged frames for each phase. From the FM PBE+ trajectories, we extracted 750 and 250 electronically converged frames for the Oct and the Sqr phases, respectively. These extracted frames subsequently formed the datasets for fine-tuning and validating MLFFs. For AIMD, the two-formula-unit cells were replicated , yielding supercells containing 16 NiO formula units to sample a broader range of local configurations.
Dataset preparation
For the datasets generated from AIMD calculations, we first held out 10% of all configurations at random for testing. Training configurations were then selected from the remaining configurations by maximizing the information entropy implemented in QUESTS[27]. The information entropy of a set of structures () is defined as[28]
where denotes the vectorized local atomic features of structure , is a Gaussian kernel, and is the kernel bandwidth, set to in this work. The local atomic features were constructed using 32 channels and a radial cutoff of 5.0 Å. The differential entropy gain upon adding a candidate structure into the existing dataset is given by
All DFT-labeled structures were ranked by , and the top configurations were selected to maximize the information diversity of the training set for a given training-set size.
Using this approach, we selected configurations from the PBE dataset to fit the pretrained MLFFs accurately to the non-spin-polarized PBE surface. For the PBE+ dataset, we varied from 50 to 290 in increments of 40 to investigate how rapidly test errors decrease with increasing training set size. For each , three independent train–test splits were generated in order to assess the reproducibility of test errors across different data splits.
Foundation MLFFs and fine-tuning
We compared four foundation MLFFs: the MPtraj branch and the OMat24 branch of DPA-3.1-3M[15] [29], denoted as DPA3-MP and DPA3-OMAT, respectively, and two DPA4[16] models, denoted as DPA4-Air-MP and DPA4-Neo-OMAT. The neighbor cutoff radius were set to 6 Å for all these models. Models were fine-tuned and evaluated using deepmd-kit[30].
Models were trained for approximately 120 epochs, corresponding to steps. Automatic batch sizing was used with a target of 128 atoms per batch. The gradient norm was clipped to a maximum of 1.0. For DPA-3, the learning rate decayed exponentially from 0.001 to over the full training schedule at an interval of steps. The DPA-3 loss function combined energy, force, and virial mean square error (MSE) terms. Their weights were varied from 0.2:100:0.02 at the beginning of training to 20:60:1 at the end. For DPA-4, the learning rate followed a warmup-stable-decay (WSD) schedule, starting at , warming up to in steps, remaining stable until 65% of the total training steps had been completed, after which it decayed cosinusoidally to . The DPA-4 loss combined energy, force, and virial mean absolute error (MAE) terms with fixed weights of 1:1:0.25, respectively.
All DFT data and fine-tuned MLFFs are available on Figshare at https://doi.org/10.6084/m9.figshare.33191403.
Results
Correlation-sensitive phase energetics in NiO
Figure 2 compares the relative energies of NiO configurations along a common structural interpolation from Oct to Sqr. We first relaxed the endpoint structures using non-spin-polarized PBE (black diamonds, solid line), and generated the intermediate configurations by linear interpolation. We subsequently performed single-point calculations with PBE+, r2SCAN, and HSE06 under FM and AFM orderings on the same set of fixed geometries, in order to isolate differences arising from the electronic-structure method from those caused by method-dependent structural relaxation. The interpolation therefore represents a fixed configurational path rather than a minimum-energy path. The final two HSE06 configurations are omitted because consistent magnetic solutions could not be reached.
Figure 2. Correlation-sensitive energetics and site-resolved magnetic moments along the Oct–Sqr interpolation path in NiO. (a) Energy per NiO formula unit relative to the Oct configuration () as a function of the interpolation coordinate between the PBE-relaxed Oct () and Sqr () endpoints. The configurational energies were evaluated on the same set of fixed configurations. PBE+, r2SCAN, and HSE06 results are shown as red circles, blue squares, and green triangles, while solid and dash-dotted lines denote FM and AFM ordering, respectively. Non-spin-polarized PBE results are shown as open black diamonds connected by a solid line. Sqr-endpoint values, , are annotated for the consistently converged PBE, PBE+ and r2SCAN calculations. The final two HSE06 points are omitted because magnetic solutions could not be converged consistently. (b) Local magnetic moments on the two Ni sites from the AFM calculations as functions of . Colors and marker shapes follow panel (a). Ni 1 and Ni 2 are distinguished by filled and open markers and by solid and dashed lines, respectively.
The calculated energy profiles depend qualitatively on the treatment of electronic correlation. At the fixed PBE-relaxed endpoint geometries, non-spin-polarized PBE places Sqr 0.793 eV per NiO formula unit (eV/f.u.) below Oct. PBE+ reverses this ordering, placing Sqr 0.936 and 0.951 eV/f.u. above Oct under FM and AFM orderings, respectively. HSE06 exhibits the same destabilization toward Sqr as PBE+ over the portion of the path for which consistent magnetic solutions were obtained. The qualitative agreement between PBE+ and the independent, higher-cost HSE06 reference supports the use of PBE+ as the target electronic-structure level in the subsequent transfer experiments.
Even though pretraining exclusively on r2SCAN data has recently been suggested as a possible route toward improving the thermodynamic accuracy and zero-shot phase predictions of foundation MLFFs[31–33], r2SCAN pretraining cannot by itself guarantee the elimination of material-dependent errors in the underlying reference theory. In the present case, r2SCAN without places Sqr below Oct by 0.018 eV/f.u. under FM ordering and by 0.236 eV/f.u. under AFM ordering along the Oct–Sqr interpolation, in qualitative disagreement with both PBE+ and HSE06. As shown in Figure 2(b), the change in the r2SCAN energy profile coincides with a collapse of the local Ni moments, indicating that r2SCAN does not preserve the localized-moment branch throughout the interpolation. Thus, although r2SCAN may improve pre-training fidelity on average, r2SCAN pretraining should not be assumed to provide universally reliable zero-shot phase energetics. System-specific validation and fine-tuning at the target reference level remain essential.
The qualitative reversal makes NiO a stringent test of adaptation from an incorrect source-level energetic preference to the target PBE+ surface. Because the differences between the FM and AFM PBE+ profiles are much smaller than the differences among electronic-structure methods and both yield the same qualitative Oct–Sqr ordering, we use the consistently converged FM PBE+ branch as a single, well-defined target surface for the subsequent MLFF transfer experiments.
Data-efficient fine-tuning of pretrained MLFFs to PBE+
We next examine whether pretrained MLFFs can be efficiently adapted to the FM PBE+ reference surface. Figure 3 shows the energy and force RMSEs on the held-out PBE+ test set as functions of the number of target-level training configurations, . The results at correspond to zero-shot predictions. We compare four pretrained models spanning three architectures: DPA3, DPA4-Air, and DPA4-Neo. For DPA3, we consider two pretrained branches, DPA3-MP and DPA3-OMAT, trained on the MP[7] and OMat24[11] datasets, respectively. For DPA4-Air and DPA4-Neo, we use the separately released DPA4-Air-MP and DPA4-Neo-OMAT checkpoints, pretrained on MP and OMat24, respectively. For each , we train and evaluate each model using three independent train–test splits; for the zero-shot case we evaluate the pretrained models on the corresponding test sets.
Figure 3. Data-efficient adaptation of pretrained MLFFs to the NiO PBE+ reference surface. Test-set RMSEs for (a) energies and (b) forces as functions of the number of PBE+ training configurations, . Results at correspond to zero-shot predictions of the pretrained models. Symbols show results from individual train–test splits. Open blue circles along with dashed lines denote DPA3-MP, while the filled blue circles, green triangles and red squares along with solid lines denote DPA3-OMAT, DPA4-Air-MP and DPA4-Neo-OMAT, respectively. Shaded regions indicate the interquartile range across independent train–test splits at each . The horizontal dash-dotted lines indicate energy and force RMSEs of 0.5 meV/atom in panel (a) and 30 meV/Å in panel (b).
All four models improve substantially upon fine-tuning with a small amount of PBE+ data. In particular, the zero-shot energy RMSEs of the DPA-4 models are approximately 15–20 meV/atom and decrease to approximately 1–2 meV/atom with only 50 training configurations and approach 0.5 meV/atom after fine-tuning on 170 configurations. Their force RMSEs similarly decrease from approximately 125–175 meV/Å for zero-shot predictions to approximately 30 meV/Å with 170 training configurations and improve further with additional training data. These results show that foundation MLFFs pretrained on large materials datasets can be transferred efficiently to a consistently defined, system-specific PBE+ surface, despite differences between the electronic-structure conventions represented during pretraining and the consistently defined target level used for fine-tuning.
Under the present fine-tuning protocol (see Methods Section II C), the tested DPA-4 models exhibit greater data efficiency than the tested DPA-3 models. Although the DPA-3 models also benefit from target-level fine-tuning, their energy RMSEs remain approximately 1–2 meV/atom over much of the investigated range, and their force RMSEs reach approximately 30 meV/Å only for the largest training subsets (). In comparison, both DPA-4 models reach lower energy and force RMSEs with fewer PBE+ labels.
Recovery after no- fine-tuning
We further test a more demanding transfer scenario in which the pretrained models are first fine-tuned on non-spin-polarized PBE data without and subsequently transferred to the FM PBE+ target surface. The intermediate fine-tuning stage deliberately shifts the models to the potential-energy surface that favors over , allowing us to test whether prior learning of a qualitatively incorrect phase preference impedes subsequent target-level adaptation.
To verify accurate fitting to the no- reference surface, we examine DPA4-Neo-OMAT, which was first fine-tuned using 660 non-spin-polarized PBE configurations. As shown in Figure 4(c) and Figure 4(d), the resulting model reproduces the test-set no- energies and forces with RMSEs of 0.12 meV/atom and 6.49 meV/Å, respectively. The intermediate model therefore reproduces the no- surface accurately, rather than merely acquiring only a weak source-level bias.
Figure 4. Second-stage adaptation from the non-spin-polarized PBE surface without to the FM PBE+ target surface. (a–b) Test-set RMSEs for (a) energies and (b) forces as functions of the number of FM PBE+ training configurations, , used in the second fine-tuning stage. Before this stage, each model was fine-tuned on non-spin-polarized NiO PBE data without . Symbols show results from independent train–test splits. Blue circles, green triangles and red squares denote DPA3, DPA4-Air and DPA4-Neo, respectively; solid lines show the corresponding trends. Shaded regions indicate the interquartile range across independent train–test splits at each . The horizontal dash-dotted lines indicate energy and force RMSEs of 0.5 meV/atom in panel (a) and 30 meV/Å in panel (b). (c–f) Parity plots of MLFF predictions against the corresponding DFT labels. The dashed diagonal lines denote ideal agreement. (c) Energy and (d) force parity plots for DPA4-Neo after the first-stage fine-tuning on 660 non-spin-polarized PBE configurations without . (e) Energy and (f) force parity plots for DPA4-Neo after second-stage fine-tuning on 170 FM PBE+ configurations.
Figure 4(a) and Figure 4(b) show the test errors obtained when the no--adapted models are further fine-tuned using FM PBE+ data. Despite their prior alignment with the opposing energetic preference, both DPA-4 models adapt rapidly to the PBE+ surface. Their RMSEs decrease with increasing training set size at rates comparable to those obtained by direct fine-tuning from the corresponding foundation models in Figure 3. With 170 PBE+ training configurations, DPA4-Neo reaches energy and force RMSEs of 0.59 meV/atom and 31.96 meV/Å, respectively, as further shown in Figure 4(e) and Figure 4(f). Therefore, prior alignment with the no- surface does not substantially increase the number of target-level configurations required by DPA-4.
More importantly, second-stage fine-tuning corrects not only the aggregate test errors but also the qualitative phase energetics. Figure 5 compares the relative-energy profiles predicted by the no--adapted, directly PBE+-fine-tuned, and two-stage-fine-tuned DPA4-Neo models along the common – interpolation path. The no--adapted model places the endpoint 0.796 eV/f.u. below . In contrast, after second-stage fine-tuning with PBE+, the recovered model places 0.765 eV/f.u. above , reproducing the sign and closely following the profile obtained from direct PBE+ fine-tuning. The inherited source-level phase preference can therefore be reversed, and a compact target-level dataset is sufficient to redirect DPA-4 toward the opposing phase preference. Although both direct and two-
Figure 5. Predicted relative energies, , along the common – structural interpolation path (), where and correspond to and , respectively. For each model, energies are referenced to its prediction for at , such that . Red circles denote predictions from the model fine-tuned on non-spin-polarized PBE data without , while green diamonds and blue squares denote the model fine-tuned directly from its pretrained initialization to PBE+ and the model first fine-tuned on PBE without and subsequently fine-tuned on PBE+, respectively. All predictions are obtained with DPA4-Neo.
stage PBE+ fine-tuning yield a positive – energy difference, both underestimate its magnitude, predicting 0.765 eV/f.u. compared with the PBE+ value of 0.936 eV/f.u. This residual error is consistent with uneven coverage of the target dataset. AIMD trajectories initialized near tended to evolve away from this region, while electronic convergence failures further reduced the number of retained -like configurations. Consequently, the target dataset contains substantially greater coverage of the -like region. These results therefore demonstrate recovery of the qualitative phase ordering, whereas quantitatively accurate endpoint energies may require targeted enrichment of the underrepresented -like region.
DPA-3 also benefits from second-stage fine-tuning, but its energy and force RMSEs remain substantially higher than those of the DPA-4 models over the investigated training-set sizes, and the greater variation among its independent fine-tuning runs indicates greater sensitivity to the training subset or optimization trajectory under the present fine-tuning protocol. DPA-4 therefore exhibits greater adaptability and reproducibility.
Discussion and Conclusions
In this work, we investigated whether an MLFF carrying qualitatively incorrect source-level energetics can be efficiently adapted to a target-level surface. Using NiO as a case study, we considered transfer from a non-spin-polarized PBE surface, which favors over , to an FM PBE+ surface with the opposite – ordering. The pretrained DPA-4 models adapted rapidly to the target energies and forces, reaching energy RMSEs below approximately 0.5 meV/atom and force RMSEs near or below 30 meV/Å using 170 PBE+ configurations. More importantly, models that had first been fine-tuned to the no- surface could subsequently recover the opposing PBE+ phase ordering with nearly the same data efficiency as models fine-tuned directly from pretraining. Prior learning of an incorrect phase ordering therefore does not preclude efficient downstream adaptation.
Our results also indicate that downstream adaptability is an important criterion for evaluating foundation MLFFs. Foundation MLFFs should be assessed not only by their zero-shot errors but also by how efficiently and reproducibly they can be fine-tuned with limited target data. Under the present fine-tuning protocol, the tested DPA-4 models reach lower target errors with fewer configurations and show less variation among independent fine-tuning runs than the tested DPA-3 models. Because the models differ in both architecture and pretraining history, the observed difference cannot be attributed uniquely to architecture. The tested DPA-4 models are more adaptive in the present NiO benchmark.
Several limitations define the scope of these conclusions. First, the source and target datasets differ in both correlation treatment and magnetic polarization. The source surface is defined by non-spin-polarized PBE, whereas the target surface is defined by FM PBE+. The process demonstrated here must therefore be interpreted as transfer between two consistently defined electronic-structure reference surfaces, rather than as an isolated correction from DFT to DFT+. Second, the present results do not establish that arbitrary source-level errors can always be corrected across model architectures, data-selection schemes, and material systems. Transfer may become more difficult when the source data lack relevant coordination environments, the target surface introduces new bonding motifs, or multiple electronic or magnetic states must be represented simultaneously. Finally, an MLFF based only on atomic structure cannot determine the appropriate magnetic state independently. It instead learns the particular electronic-structure branch encoded in its training labels. Consistent magnetic initialization and convergence are therefore essential when constructing target-level datasets for correlated materials.
Together, these observations suggest a division of roles between universal pretraining and application-specific fine-tuning. Recent work has emphasized that mixing composition-dependent DFT and DFT+ conventions within a pretraining dataset can compromise label consistency and has advocated consistent pretraining without [13]. Our results complement this argument by showing that omitting at the source level need not prevent the resulting model from later adapting to a PBE+ target surface. Pretraining may therefore prioritize broad chemical and configurational coverage, label consistency, and computational affordability, rather than quantitative agreement with the target-level phase ordering of every possible target material. Before system-specific applications, however, a foundation MLFF should be validated against a consistently generated target-level dataset and, when necessary, fine-tuned using a compact set of higher-fidelity calculations. Foundation MLFFs should therefore be viewed not as universally accurate zero-shot calculators but as transferable priors whose practical value depends both on broad prior knowledge and efficient target-level adaptability.
Acknowledgments
This work was supported by the National Key R&D Program of China (Grant No. 2021YFA0718900), the National Natural Science Foundation of China (Grant Nos. 12574069, 92477114, and 12374096) and the Suzhou Municipal Science and Technology Program (Gusu Innovation and Entrepreneurship Leading Talent Program, Grant No. ZXL2025304). We thank DP Technology for providing computational resources through the Bohrium platform and data hosting services via AIS Square.
References
References
- [1]V. I. Anisimov, J. Zaanen, and O. K. Andersen, Band theory and Mott insulators: Hubbard U instead of Stoner I, Physical Review B 44, 943 (1991).
- [2]M. Cococcioni and S. de Gironcoli, Linear response approach to the calculation of the effective interaction parameters in the LDA + U method, Physical Review B 71, 035105 (2005).DOI
- [3]A. Jain, G. Hautier, S. P. Ong, C. J. Moore, C. C. Fischer, K. A. Persson, and G. Ceder, Formation enthalpies by mixing GGA and GGA + U calculations, Physical Review B 84, 045115 (2011).DOI
- [4]D. Spagnoli, K. Refson, K. Wright, and J. D. Gale, Density functional theory study of the relative stability of the iron disulfide polymorphs pyrite and marcasite, Physical Review B 81, 094106 (2010).DOI
- [5]O. Y. Long, G. Sai Gautam, and E. A. Carter, Evaluating optimal U for 3 d transition-metal oxides within the SCAN+ U framework, Physical Review Materials 4, 045401 (2020).
- [6]R. L. Kam, L. Binci, A. D. Kaplan, K. A. Persson, N. Marzari, and G. Ceder, Interplay between electron localization, magnetic order, and Jahn-Teller distortion dictates LiMnO 2 phase stability, Physical Review B 111, 245132 (2025).arxiv.org/abs/2412.16816
- [7]A. Jain, S. P. Ong, G. Hautier, W. Chen, W. D. Richards, S. Dacek, S. Cholia, D. Gunter, D. Skinner, G. Ceder, and K. A. Persson, Commentary: The Materials Project: A materials genome approach to accelerating materials innovation, APL Materials 1, 011002 (2013).DOI
- [8]M. K. Horton, P. Huck, R. X. Yang, J. M. Munro, S. Dwaraknath, A. M. Ganose, R. S. Kingsbury, M. Wen, J. X. Shen, T. S. Mathis, A. D. Kaplan, K. Berket, J. Riebesell, J. George, A. S. Rosen, E. W. C. Spotte-Smith, M. J. McDermott, O. A. Cohen, A. Dunn, M. C. Kuner, G.-M. Rignanese, G. Pretto, D. Waroquiers, S. M. Griffin, J. B. Neaton, D. C. Chrzan, M. Asta, G. Hautier, S. Cholia, G. Ceder, S. P. Ong, A. Jain, and K. A. Persson, Accelerated data-driven materials science with the Materials Project, Nature Materials 10.1038/s41563-025-02272-0 (2025).DOI
- [9]J. Schmidt, H.-C. Wang, T. F. T. Cerqueira, S. Botti, and M. A. L. Marques, A dataset of 175k stable and metastable materials calculated with the PBEsol and SCAN functionals, Scientific Data 9, 64 (2022).
- [10]J. Schmidt, N. Hoffmann, H.-C. Wang, P. Bordio, P. J. M. A. Carriço, T. F. T. Cerqueira, S. Botti, and M. A. L. Marques, Machine-Learning-Assisted Determination of the Global Zero-Temperature Phase Diagram of Materials, Advanced Materials 35, 2107788 (2023).DOI
- [11]L. Barros-Luque, M. Shuaibi, X. Fu, B. M. Wood, M. Dzamba, M. Gao, A. Rizvi, M. Uyttendaele, C. L. Zitnick, and Z. W. Ulissi, The Open Materials 2024 (OMat24) inorganic materials dataset and models, Nature Computational Science 6, 642 (2026).
- [12]F. Zhou, M. Cococcioni, C. A. Marianetti, D. Morgan, and G. Ceder, First-principles prediction of redox potentials in transition-metal compounds with LDA + U, Physical Review B 70, 235121 (2004).DOI
- [13]T. Warford, F. L. Thiemann, and G. Csányi, Better without U: Impact of selective Hubbard U correction on foundational MLIPs, Machine Learning: Science and Technology 7, 035033 (2026).
- [14]R. Wang, Y. Gao, H. Wu, and Z. Zhong, Pre-training, fine-tuning, and distillation (PFD): Automatically generating machine learning force fields from universal models, Physical Review Materials 9, 113802 (2025).DOI
- [15]D. Zhang, A. Peng, C. Cai, W. Li, Y. Zhou, J. Zeng, M. Guo, C. Zhang, B. Li, H. Jiang, T. Zhu, W. Jia, L. Zhang, and H. Wang, A graph neural network for the era of large atomistic models, npj Computational Materials 10.1038/s41524-026-02146-2 (2026).
- [16]T. Li, W. Li, A. Peng, J. Xue, L. Zhang, D. Zhang, and H. Wang, DPA4: Pushing the Accuracy-Cost Frontier of Interatomic Potentials with EMFA SO(2) Convolution (2026), arXiv:2606.02419 [physics.chem-ph].arxiv.org/abs/2606.02419
- [17]G. Kresse and J. Hafner, Ab initio molecular dynamics for liquid metals, Physical Review B 47, 558 (1993).
- [18]G. Kresse and J. Furthmüller, Efficiency of ab-initio total energy calculations for metals and semiconductors using a plane-wave basis set, Computational Materials Science 6, 15 (1996).DOI
- [19]G. Kresse and J. Furthmüller, Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set, Physical Review B 54, 11169 (1996).pubmed.ncbi.nlm.nih.gov/9984901
- [20]G. Kresse and D. Joubert, From ultrasoft pseudopotentials to the projector augmented-wave method, Physical Review B 59, 1758 (1999).DOI
- [21]S. P. Ong, W. D. Richards, A. Jain, G. Hautier, M. Kocher, S. Cholia, D. Gunter, V. L. Chevrier, K. A. Persson, and G. Ceder, Python Materials Genomics (pymatgen): A robust, open-source python library for materials analysis, Computational Materials Science 68, 314 (2013).DOI
- [22]S. L. Dudarev, G. A. Botton, S. Y. Savrasov, C. J. Humphreys, and A. P. Sutton, Electron-energy-loss spectra and the structural stability of nickel oxide: An LSDA+U study, Physical Review B 57, 1505 (1998).DOI
- [23]J. P. Perdew, K. Burke, and M. Ernzerhof, Generalized Gradient Approximation Made Simple, Physical Review Letters 77, 3865 (1996).pubmed.ncbi.nlm.nih.gov/10062328
- [24]J. P. Perdew, K. Burke, and M. Ernzerhof, Generalized Gradient Approximation Made Simple [Phys. Rev. Lett. 77, 3865 (1996)], Physical Review Letters 78, 1396 (1997).pubmed.ncbi.nlm.nih.gov/10062328
- [25]J. W. Furness, A. D. Kaplan, J. Ning, J. P. Perdew, and J. Sun, Accurate and Numerically Efficient r2SCAN Meta-Generalized Gradient Approximation, The Journal of Physical Chemistry Letters 11, 8208 (2020).DOI