betaFeedback

WorksEngineering

Energy-Efficient Tri-Hybrid Beamforming with Movable Pattern-Reconfigurable Antennas

Abstract

Conventional hybrid precoding is confined to the digital/analog domains, leaving the spatial and radiation-pattern degrees-of-freedoms (DoFs) largely untapped. To unlock these, we propose a movable pattern-reconfigurable antenna (MPRA) and an energy-efficient tri-hybrid framework that jointly optimizes the precoders, antenna positions, and radiation-pattern states. We develop a hardware-inspired power model capturing the energy and transmission-time costs of antenna reconfiguration. The resulting mixed discrete-continuous fractional problem is solved via an alternating-optimization framework combining fractional programming, Riemannian optimization, and switching-aware pattern optimization. Simulations demonstrate near-exhaustive-search performance and consistent energy-efficiency (EE) gains, validating the complementary benefits of antenna movement, pattern reconfiguration, and tri-hybrid precoding under hardware-inspired power and latency costs.

Introduction

The evolution of multiple-input multiple-output (MIMO) technologies for sixth-generation (6G) and beyond wireless network has continuously expanded the spatial degree-of-freedom (DoF) available for wireless transmission [1, 2]. Nevertheless, conventional fixed-position antenna (FPA) arrays employ predetermined element locations that cannot adapt to the propagation environment, thereby limiting their ability to exploit spatial channel variations. To overcome this limitation, reconfigurable antenna technologies, such as movable antenna (MA) [3, 4] and fluid antenna systems (FAS) [5, 6], have emerged as promising approaches for exploiting spatial channel variations. In representative position-reconfigurable FAS models, selecting favorable antenna locations, termed ports, provides spatial diversity [5, 7]. Such spatial selection can also mitigate multi-user interference by exploiting locations where interfering signals undergo deep fading [8]. In MA systems, spatial reconfiguration is implemented by adaptively adjusting antenna positions within prescribed regions according to the propagation environment [3, 9]. This enables MA to reshape the effective channel, circumvent unfavorable fading regions, and consequently enhance MIMO performance [10].

Recent studies have demonstrated substantial performance gains of MA over FPA. In [9], a field-response channel model characterized spatial multipath variations and revealed the fundamental spatial-diversity gains of MA. Building on this foundation, [10] characterized MA-MIMO capacity by jointly optimizing transmit/receive antenna positions and transmit covariance. For multi-user systems, [11] substantially reduced transmit power through joint antenna-position, power-control, and receive-combining optimization. In array processing, [12] jointly optimized antenna positions and weights to enhance desired multi-beam gains and suppress interference toward undesired directions. For efficient position optimization, [13] developed a discrete-sampling framework with sequential updates and Gibbs sampling to achieve near-optimal performance at low complexity, while [14] used differential evolution and adaptive constraint penalties to reduce the complexity of conventional population-based methods.

The synergy between MA and other technologies has also attracted growing attention. In [15], MA positioning was jointly designed with intelligent reflecting surface (IRS) beamforming, revealing that the additional gain offered by antenna mobility depends on the channel-reconfiguration capability of the IRS. Furthermore, [16] developed a large-timescale MA positioning based on statistical channel-state information (CSI), demonstrating a communication-sensing tradeoff through reduced inter-user channel correlation and sensing ambiguity. In the context of integrated-sensing-and-communications (ISAC), [17] jointly optimized antenna positions and beamforming to enhance the ISAC performance. Overall, these studies have demonstrated the substantial benefits of MA, establishing it as a promising reconfigurable architecture for 6G and beyond.

Despite these advantages, conventional MA primarily exploit spatial DoF through antenna repositioning. With fixed antenna radiation characteristics, however, repositioning changes propagation distances and path-dependent spatial phases [10]. Position optimization alone therefore cannot directly reshape the radiation pattern to favor useful propagation paths or suppress interfering directions. This limitation is particularly relevant in multi-user and multipath environments, where paths arrive or depart along distinct angular directions [18, 19].

To handle this, pattern-reconfigurable antenna (PRA) offers complementary electromagnetic (EM)-domain DoF by dynamically adjusting their radiation patterns [20], redistributing directional gains to enhance desired paths and suppress less useful or interfering directions [21, 22]. Recent studies have demonstrated that PRA can substantially improve the performance of MIMO systems; In [23], joint analog-phase and radiation-state optimization on FAS improved spectral-efficiency (SE), received power, and bit-error-rate (BER), as validated by full-wave simulations and hardware experiments. In [24], spherical-harmonic-based radiation-pattern synthesis was jointly configured with digital precoding, achieving significant SE gains with low channel-estimation overhead. These results highlight PRA as a promising means of adapting the angular response to the propagation environment.

Realizing the benefits of PRA requires jointly optimizing their radiation states with multiple precoding stages. In hardware-efficient multi-antenna systems, precoding is conventionally implemented through hybrid beamforming across the digital baseband and analog radio-frequency (RF) domains [25]. Building upon this two-layer architecture, additional performance gains can be achieved by explicitly incorporating the antenna-domain DoFs provided by PRA, which has motivated the emergence of tri-hybrid beamforming [26], which augments the hybrid layers with an EM-domain precoding layer [27]. By configuring the antenna characteristics, it directly shapes the radiated field and further reduces reliance on costly RF-domain hardware [19, 28, 29], thereby enabling flexible and energy-efficient transmission.

Furthermore, PRA naturally complements MA: MA selects favorable spatial locations, while PRA adapts the angular response at each location. Since both reshape the effective multi-user channel, their gains are best realized through joint design with precoders. Tri-hybrid beamforming therefore supports this integration by combining digital/analog RF processing with EM-domain antenna-state control, alongside spatial position adaptation. However, this couples antenna positions, radiation states, and hybrid precoders through the multipath channel, while movement and pattern switching incur time and energy costs. Existing studies largely address these DoFs separately, leaving their joint optimization under hardware-inspired reconfiguration costs unexplored. Although [30] electronically emulates movement through discrete radiation-position selection, it neither treats physical displacement and pattern shaping as independent DoFs nor accounts for multilayer precoding and realistic reconfiguration overhead.

Motivated by these considerations, we introduce a movable pattern-reconfigurable antenna (MPRA) architecture and develop an energy-efficient tri-hybrid framework for multi-user system that explicitly accounts for hardware-inspired reconfiguration delays and energy costs. We formulate and solve an energy-efficiency (EE) maximization problem that balances the channel gains offered by spatial and pattern reconfiguration against their hardware-inspired costs. The main contributions are summarized as follows:

  • We propose an MPRA-enabled tri-hybrid transmission architecture that jointly leverages antenna positioning, radiation-pattern reconfiguration, and digital-analog precoding. A unified position- and pattern-dependent field-response model is established, in which antenna displacement controls the path-dependent spatial phases, whereas pattern selection reshapes the path-dependent directional gains. The resulting cascade explicitly incorporates pattern selection as an additional EM-domain precoding layer and establishes the tri-hybrid architecture.

  • We formulate a hardware-inspired EE model that captures both the energy expenditure and the loss of data

Illustration of a multi-user downlink system employing a tri-hybrid MPRA architecture at BS

Figure 1. Illustration of a multi-user downlink system employing a tri-hybrid MPRA architecture at BS.

transmission time caused by antenna reconfiguration. We further demonstrate that operating each antenna at its maximum feasible synchronized speed is EE-optimal, thereby eliminating the movement-speed variables. Based on this model, the joint tri-hybrid MPRA design is formulated as a nonsmooth mixed discrete-continuous fractional program.

  • We develop an alternating optimization (AO) framework tailored to the problem. The hybrid-precoder block combines Dinkelbach’s method with weighted minimum mean-squared error (WMMSE) optimization, using closed-form digital updates with bisection and Riemannian conjugate-gradient (RCG) analog updates. Thereafter, a switching-aware cyclic search optimizes discrete patterns while accounting for transition costs and avoiding an exponential number of state enumeration. The antenna-position optimization block uses a quadratic transform and WMMSE-based successive convex approximation (SCA) to yield convex subproblems.

  • We establish that every block update preserves feasibility and does not decrease the original EE; consequently, the resulting EE sequence is monotonically nondecreasing and convergent. Numerical results further show that the proposed framework closely approaches the brute-force search (BFS) benchmark and consistently outperforms baselines in various scenarios.

System Model and Problem Formulation

Network Architecture

As illustrated in Fig. 1, we consider a multi-user downlink system in which a base station (BS) with NRFN_{\mathrm{RF}} RF chains and NN MPRAs simultaneously serves KK single-antenna users. The user, MPRA, RF chains, and radiation-pattern index sets are denoted by K≜{1,⋯ ,K}\mathcal{K} \triangleq\{1,\cdots,K\}, N≜{1,⋯ ,N}\mathcal{N} \triangleq\{1,\cdots,N\}, NRF≜{1,⋯ ,NRF}\mathcal{N}_{\mathrm{RF}} \triangleq\{1,\cdots,N_{\mathrm{RF}}\}, and S≜{1,⋯ ,S}\mathcal{S} \triangleq\{1,\cdots,S\}, respectively, where K≤NRF≤NK \leq N_{\mathrm{RF}} \leq N. Let s=[s1⋯sK]T∼CN(0,IK)\mathbf{s}=[s_1\cdots s_K]^{\mathrm{T}}\sim\mathcal{CN}(0,\mathbf{I}_K) denote the data-symbol vector. The digital/analog precoders are denoted by FBB=[f1⋯fK]∈CNRF×K\mathbf{F}_{\mathrm{BB}}=[\mathbf{f}_1\cdots\mathbf{f}_K]\in\mathbb{C}^{N_{\mathrm{RF}}\times K} and FRF∈CN×NRF\mathbf{F}_{\mathrm{RF}}\in\mathbb{C}^{N\times N_{\mathrm{RF}}}, respectively. The transmit vector delivered to the NN MPRA ports is therefore x=FRFFBBs\mathbf{x}=\mathbf{F}_{\mathrm{RF}}\mathbf{F}_{\mathrm{BB}}\mathbf{s}, with:

E[∥x∥2]=∥FRFFBB∥F2≤Pmax⁡,(1)\mathbb{E}[\|\mathbf{x}\|^2]=\|\mathbf{F}_{\mathrm{RF}}\mathbf{F}_{\mathrm{BB}}\|_{\mathrm{F}}^2\leq P_{\max}, \tag*{(1)}

with power constraint Pmax⁡P_{\max}. We assume a partially-connected phase-shifter network, where each MPRA is connected to exactly one RF chain [25]. Let M≜N/NRF∈ZM\triangleq N/N_{\mathrm{RF}}\in\mathbb{Z} denote the number of MPRAs connected to each RF chain and define Nr≜{(r−1)M+1,⋯ ,rM}N_r \triangleq\{(r-1)M+1,\cdots,rM\} (r∈NRFr\in\mathcal{N}_{\mathrm{RF}}).2 The corresponding FRF\mathcal{F}_{\mathrm{RF}}-feasible set is [25]:

FRF≜{FRF=blkdiag⁡(f1,⋯ ,fNRF)∈CN×NRF,fr∈CM,∣[fr]m∣=1M (m=1,⋯ ,M)}.(2)\mathcal{F}_{\mathrm{RF}}\triangleq\left\{\mathbf{F}_{\mathrm{RF}}=\operatorname{blkdiag}(\mathbf{f}_1,\cdots,\mathbf{f}_{N_{\mathrm{RF}}})\in\mathbb{C}^{N\times N_{\mathrm{RF}}},\mathbf{f}_r\in\mathbb{C}^{M},\left|[\mathbf{f}_r]_m\right|=\frac{1}{\sqrt{M}}\ (m=1,\cdots,M)\right\}. \tag*{(2)}

Since FRF∗FRF=INRF\mathbf{F}_{\mathrm{RF}}^{*}\mathbf{F}_{\mathrm{RF}}=\mathbf{I}_{N_{\mathrm{RF}}} by (2), (1) becomes

∥FRFFBB∥F2=∥FBB∥F2≤Pmax⁡.(3)\left\|\mathbf{F}_{\mathrm{RF}}\mathbf{F}_{\mathrm{BB}}\right\|_{F}^{2}=\left\|\mathbf{F}_{\mathrm{BB}}\right\|_{F}^{2}\leq P_{\max}. \tag*{(3)}

Movable Pattern-Reconfigurable Antenna (MPRA) Model

The nnth MPRA moves inside {Cn⊂R2}\{\mathcal{C}_n\subset\mathbb{R}^{2}\}, a non-overlapping A×AA\times A squares to prohibit physical collisions [10, 32]. Its given original and target positions are denoted by rn0=[xn0 yn0]T\mathbf{r}_n^{0}=[x_n^{0}\ y_n^{0}]^{\mathrm{T}} and rn=[xn yn]T\mathbf{r}_n=[x_n\ y_n]^{\mathrm{T}}, respectively, and let R0≜[r10⋯rN0]∈R2×N\mathbf{R}^{0}\triangleq[\mathbf{r}_1^{0}\cdots\mathbf{r}_N^{0}]\in\mathbb{R}^{2\times N} and R≜[r1⋯rN]∈R2×N\mathbf{R}\triangleq[\mathbf{r}_1\cdots\mathbf{r}_N]\in\mathbb{R}^{2\times N}. To prevent excessive EM coupling [10, 33], {rn}\{\mathbf{r}_n\} satisfy

rn∈Cn (∀n∈N),∥rn−rm∥2≥dmin⁡ (∀n<m),(4)\mathbf{r}_n\in\mathcal{C}_n\ (\forall n\in\mathcal{N}),\quad\left\|\mathbf{r}_n-\mathbf{r}_m\right\|_2\geq d_{\min}\ (\forall n<m), \tag*{(4)}

with minimum separation dmin⁡>0d_{\min}>0 and so for {rn0}\{\mathbf{r}_n^{0}\} but >dmin⁡>d_{\min} instead of ≥\geq; this ensures the feasible initialization developed in Section III-E.

For pattern reconfiguration, each MPRA selects a pattern from a calibrated codebook of size SS [19, 21, 23, 29]:3

ψ‾(Ω)≜[ψ‾1(Ω)⋯ψ‾S(Ω)]T,(5)\overline{\boldsymbol{\psi}}(\Omega)\triangleq[\overline{\psi}_1(\Omega)\cdots\overline{\psi}_S(\Omega)]^{\mathrm{T}}, \tag*{(5)}

where Ω=(θ,ϕ)\Omega=(\theta,\phi) denotes an elevation and azimuth departure direction, respectively, and ψ‾s(Ω)∈R+\overline{\psi}_s(\Omega)\in\mathbb{R}_{+} denotes the ssth normalized field-amplitude response, shared by all MPRAs.4 With state selection zn∈{0,1}S\mathbf{z}_n\in\{0,1\}^{S}, the configured pattern is

ψn(Ω;zn)=ψ‾T(Ω)zn,1STzn=1,(6)\psi_n(\Omega;\mathbf{z}_n)=\overline{\boldsymbol{\psi}}^{\mathrm{T}}(\Omega)\mathbf{z}_n,\quad\mathbf{1}_{S}^{\mathrm{T}}\mathbf{z}_n=1, \tag*{(6)}

and we collect {zn}\{\mathbf{z}_n\} in Z≜[z1⋯zN]∈{0,1}S×N\mathbf{Z}\triangleq[\mathbf{z}_1\cdots\mathbf{z}_N]\in\{0,1\}^{S\times N}.

Tri-Hybrid Architecture with R- and Z-Dependency

We adopt a narrowband geometric block-fading model [18, 19, 34]. The channel between the BS and user kk, varies with (R,Z)(\mathbf{R},\mathbf{Z}) [10, 32, 33], consists of LkL_k far-field propagation paths. The ℓ\ellth path is characterized by Ωk,ℓ=(θk,ℓ,ϕk,ℓ)\Omega_{k,\ell}=(\theta_{k,\ell},\phi_{k,\ell}), i.i.d. channel gain αk,ℓ∈C\alpha_{k,\ell}\in\mathbb{C} with E[∣αk,ℓ∣2]=1\mathbb{E}[|\alpha_{k,\ell}|^2]=1, and path-loss βk\beta_k [19]. For Ω=(θ,ϕ)\Omega=(\theta,\phi), define u(Ω)=[sin⁡θcos⁡ϕ sin⁡θsin⁡ϕ cos⁡θ]T\mathbf{u}(\Omega)=[\sin\theta\cos\phi\ \sin\theta\sin\phi\ \cos\theta]^{\mathrm{T}}. We use k0≜2π/λk_0\triangleq2\pi/\lambda for the wavenumber, and embed rn\mathbf{r}_n into r~n=[rnT 0]T\widetilde{\mathbf{r}}_n=[\mathbf{r}_n^{\mathrm{T}}\ 0]^{\mathrm{T}}. The antenna-wise pattern selections are collected into:

Fsel(Z)≜blkdiag⁡{z1,⋯ ,zN}∈{0,1}NS×N.(7)\mathbf{F}_{\mathrm{sel}}(\mathbf{Z})\triangleq\operatorname{blkdiag}\{\mathbf{z}_1,\cdots,\mathbf{z}_N\}\in\{0,1\}^{NS\times N}. \tag*{(7)}

For (k,ℓ)(k,\ell), define the R\mathbf{R}-dependent spatial-response as

References

  1. [1]Z. Wang et al., “A tutorial on extremely large-scale MIMO for 6G: Fundamentals, signal processing, and applications,” IEEE Commun. Surveys Tuts., vol. 26, no. 3, pp. 1560–1605, Third Quarter 2024.arxiv.org/abs/2307.07340
  2. [2]A. Davydov et al., “Evolution of antenna technology: From 5G massive MIMO to 6G extreme MIMO systems,” IEEE Commun. Mag., vol. 64, no. 6, pp. 66–72, Jun. 2026.DOI
  3. [3]L. Zhu et al., “A tutorial on movable antennas for wireless networks,” IEEE Commun. Surveys Tuts., vol. 28, pp. 3002–3054, 2026.arxiv.org/abs/2502.17905
  4. [4]L. Zhu, “Movable antennas for wireless communication: Opportunities and challenges,” IEEE Commun. Mag., vol. 62, no. 6, pp. 114–120, Jun. 2024.arxiv.org/abs/2306.02331
  5. [5]K.-K. Wong et al., “Fluid antenna systems,” IEEE Trans. Wireless Commun., vol. 20, no. 3, pp. 1950–1962, Mar. 2021.arxiv.org/abs/2005.11561
  6. [6]T. Wu et al., “Fluid antenna systems enabling 6G: Principles, applications, and research directions,” IEEE Wireless Commun., vol. 33, no. 4, pp. 100–108, Aug. 2026.arxiv.org/abs/2412.03839
  7. [7]H.-B. Jeon et al., “Performance analysis and optimization of FAS-ARIS communications for 6G: System modeling and analytical insights,” IEEE Trans. Wireless Commun., vol. 25, pp. 18 965–18 981, 2026.arxiv.org/abs/2603.20011
  8. [8]T. Wu et al., “Variable block-correlation modeling and optimization for secrecy analysis in fluid antenna systems,” IEEE Trans. Wireless Commun., vol. 25, pp. 15 069–15 085, 2026.arxiv.org/abs/2510.03594
  9. [9]L. Zhu et al., “Modeling and performance analysis for movable antenna enabled wireless communications,” IEEE Trans. Wireless Commun., vol. 23, no. 6, pp. 6234–6250, Jun. 2024.arxiv.org/abs/2210.05325
  10. [10]W. Ma et al., “MIMO capacity characterization for movable antenna systems,” IEEE Trans. Wireless Commun., vol. 23, no. 4, pp. 3392–3407, Apr. 2024.arxiv.org/abs/2210.05396
  11. [11]L. Zhu et al., “Movable-antenna enhanced multiuser communication via antenna position optimization,” IEEE Trans. Wireless Commun., vol. 23, no. 7, pp. 7214–7229, Jul. 2024.arxiv.org/abs/2302.06978
  12. [12]W. Ma et al., “Multi-beam forming with movable-antenna array,” IEEE Commun. Lett., vol. 28, no. 3, pp. 697–701, Mar. 2024.arxiv.org/abs/2311.03775
  13. [13]C. Liu et al., “A general optimization framework for movable antenna systems via discrete sampling,” IEEE Wireless Commun. Lett., vol. 15, pp. 475–479, 2026.arxiv.org/abs/2509.20987
  14. [14]Y. Zhang et al., “Movable-antenna position optimization: A new evolutionary framework,” IEEE Trans. Wireless Commun., vol. 25, pp. 5216–5231, 2026.DOI
  15. [15]X. Wei et al., “Movable antennas meet intelligent reflecting surface: Friends or foes?” IEEE Trans. Commun., vol. 73, no. 11, pp. 12 756–12 770, Nov. 2025.arxiv.org/abs/2501.15880
  16. [16]W. Ma et al., “Movable antenna enhanced integrated sensing and communication via antenna position optimization,” IEEE Trans. Signal Process., vol. 74, pp. 1522–1537, 2026.arxiv.org/abs/2501.07318
  17. [17]W. Lyu et al., “Movable antenna enabled integrated sensing and communication,” IEEE Trans. Wireless Commun., vol. 24, no. 4, pp. 2862–2875, Apr. 2025.arxiv.org/abs/2410.19763
  18. [18]H.-J. Moon et al., “Geometry-aware DRL for multi-subband scheduling in satellite-assisted UAM networks,” arXiv:2608.17612, 2026.arxiv.org/abs/2608.17612
  19. [19]P. Zheng et al., “Tri-hybrid multi-user precoding using pattern-reconfigurable antennas: Fundamental models and practical algorithms,” IEEE Trans. Commun., vol. 74, pp. 11 789–11 804, 2026.DOI
  20. [20]M. Liu et al., “Reconfigurable antenna arrays: Bridging electromagnetics and signal processing,” IEEE Commun. Mag., pp. 1–7, 2026.arxiv.org/abs/2510.17113
  21. [21]Y. Zhang et al., “A low-profile microstrip vertically polarized endfire antenna with 360° beam-scanning and high beam-shaping capability,” IEEE Trans. Antennas Propag., vol. 70, no. 9, pp. 7691–7702, Sep. 2022.DOI
  22. [22]W. Zheng et al., “Design of polarization-reconfigurable pixel antennas with optimized PIN-diode implementation,” IEEE Trans. Antennas Propag., vol. 73, no. 2, pp. 851–862, Feb. 2025.DOI
  23. [23]R. Wang et al., “Electromagnetically reconfigurable fluid antenna system for wireless communications: Design, modeling, algorithm, fabrication, and experiment,” IEEE J. Sel. Areas Commun., vol. 44, pp. 1464–1479, 2026.arxiv.org/abs/2502.19643
  24. [24]K. Ying et al., “Reconfigurable massive MIMO: Precoding design and channel estimation in the electromagnetic domain,” IEEE Trans. Commun., vol. 73, no. 5, pp. 3423–3440, May 2025.arxiv.org/abs/2405.02823
  25. [25]X. Yu et al., “Alternating minimization algorithms for hybrid precoding in millimeter wave MIMO systems,” IEEE J. Sel. Topics Signal Process., vol. 10, no. 3, pp. 485–500, Apr. 2016.DOI
  26. [26]R. W. Heath Jr. et al., “The tri-hybrid MIMO architecture,” IEEE Wireless Commun., vol. 33, no. 1, pp. 199–206, Feb. 2026.arxiv.org/abs/2505.21971
  27. [27]M. R. Castellanos et al., “Embracing reconfigurable antennas in the tri-hybrid MIMO architecture for 6G and beyond,” IEEE Trans. Commun., vol. 74, pp. 381–401, 2026.arxiv.org/abs/2501.16610
  28. [28]Y. Li et al., “Tri-hybrid beamforming for radiation-center reconfigurable antenna array: Spectral efficiency and energy efficiency,” IEEE Trans. Wireless Commun., vol. 25, pp. 12 263–12 278, 2026.
  29. [29]M. Liu et al., “Tri-timescale beamforming design for tri-hybrid architectures with reconfigurable antennas,” IEEE Trans. Wireless Commun., vol. 25, pp. 22 195–22 210, 2026.arxiv.org/abs/2503.03620
  30. [30]K. Chen et al., “REMAAA: Reconfigurable pixel antenna-based electronic movable-antenna arrays for multiuser communications,” IEEE Trans. Commun., vol. 73, no. 11, pp. 12 913–12 928, Nov. 2025.arxiv.org/abs/2504.00787
  31. [31]N. T. Nguyen and K. Lee, “Unequally sub-connected architecture for hybrid beamforming in massive MIMO systems,” IEEE Trans. Wireless Commun., vol. 19, no. 2, pp. 1127–1140, Feb. 2020.arxiv.org/abs/1908.10056
  32. [32]Y. Zhang et al., “Movable antenna-aided hybrid beamforming for multi-user communications,” IEEE Trans. Veh. Technol., vol. 74, no. 6, pp. 9899–9903, Jun. 2025.arxiv.org/abs/2404.00953
  33. [33]X. Wei et al., “Energy-efficient movable antennas: Mechanical power modeling and performance optimization,” IEEE Trans. Wireless Commun., vol. 25, pp. 16 888–16 902, 2026.arxiv.org/abs/2509.24433
  34. [34]S. Jang and C. Lee, “Learning-aided channel estimation for wideband mmWave MIMO systems with beam squint,” IEEE Trans. Wireless Commun., vol. 24, no. 1, pp. 706–720, Jan. 2025.DOI
  35. [35]——, “New view of learning-aided channel estimation for movable antenna systems,” IEEE Trans. Wireless Commun., vol. 24, no. 7, pp. 5694–5708, Jul. 2025.DOI
  36. [36]——, “Deep learning-driven channel estimation for movable antenna-aided wideband systems,” IEEE Trans. Wireless Commun., vol. 25, pp. 6954–6969, 2026.DOI
  37. [37]S. Jang and H. Cho, “Near-field channel estimation for movable antenna systems: Angle-to-distance recovery via movement range adjustment,” IEEE Trans. Wireless Commun., vol. 25, pp. 23 097–23 112, 2026.DOI
  38. [38]G. Hu et al., “Fundamental tradeoff in movable antenna systems: How long to move before transmission?” arXiv:2604.20386, 2026.arxiv.org/abs/2604.20386
  39. [39]X. Xiao et al., “Generalized synchronization control of multi-axis motion systems,” Control Eng. Pract., vol. 13, no. 7, pp. 809–819, Jul. 2005.DOI
  40. [40]P. Acarnley, Stepping Motors: A Guide to Theory and Practice. Edison, NJ, USA: IET, 2002.DOI
  41. [41]L. N. Ribeiro et al., “Energy efficiency of mmWave massive MIMO precoding with low-resolution DACs,” IEEE J. Sel. Topics Signal Process., vol. 12, no. 2, pp. 298–312, May 2018.DOI
  42. [42]A. Zappone and E. Jorswieck, “Energy efficiency in wireless networks via fractional programming theory,” Found. Trends Commun. Inf. Theory, vol. 11, no. 3-4, pp. 185–396, 2015.
  43. [43]L. Zhang et al., “A descent modified Polak–Ribière–Polyak conjugate gradient method and its global convergence,” IMA J. Numer. Anal., vol. 26, no. 4, pp. 629–640, Oct. 2006.DOI
  44. [44]K. Shen and W. Yu, “Fractional programming for communication systems—Part I: Power control and beamforming,” IEEE Trans. Signal Process., vol. 66, no. 10, pp. 2616–2630, May 2018.DOI
  45. [45]G. Scutari et al., “Parallel and distributed methods for constrained nonconvex optimization—Part I: Theory,” IEEE Trans. Signal Process., vol. 65, no. 8, pp. 1929–1944, Apr. 2017.
  46. [46]S. Boyd and L. Vandenberghe, Convex Optimization. Cambridge, UK: Cambridge Univ. Press, 2004.

Paper details

vlnc:W_jets5s72
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Engineering

Not recorded for this paper

View statement
Looking for related papers…
Contents