betaFeedback

Reading v1View latest version

WorksPhysics and Astronomy

Sand Supported Mixed-Phase TiO2_2 Photocatalysts for Water Decontamination Applications

Abstract

Using an organometallic precursor, TiO2_2 coatings were fabricated on surfaces of quartz, zircon and rutile sands. X ray Diffraction, X ray Fluorescence, UV Vis spectroscopy and surface area measurement were used to characterise support materials. The phase composition and morphology of the coatings were characterised by laser Raman spectroscopy and SEM respectively. A packed bed reactor was used to study the inactivation of Escherichia coli in recirculating water by the supported photocatalysts. It was found that the sand grains were well coated with a homogenous layer of TiO2 and coatings were well adhered, exhibiting a mixed anatase rutile composition after firing at 850C. Photocatalytic activity was highest in coatings applied to quartz sand, although sterilisation of the recirculating water was not achieved with any of the materials investigated. The advantages of quartz as a TiO2_2 photocatalyst support material are likely a result of this materials higher purity and optical transmittance. Potential enhancement through Si doping cannot be ruled out.

Paper details

vlnc:W_jggpsz3v
Published
Added
License
arXiv nonexclusive license
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…