WorksPhysics and Astronomy
Superconducting Fluctuation Driven Quantum Transport in BiSrCaCuO Thin Films
Abstract
Superconducting fluctuations (SF), arising from Cooper-pair-driven interactions and electron-electron interactions within the transition regime, can dominate the magnetoconductance (MC) of superconducting thin films near their transition temperature. In some systems, this fluctuation-dominated regime is preceded by a narrow window in which quantum interference effects are manifested as weak antilocalization (WAL) or weak localization (WL). Here, we report magnetotransport measurements on thin films of the high-temperature superconductor BiSrCaCuO (BSCCO) that establish SF as the dominant mechanism governing MC across the transition regime. In the narrow temperature window well above where SF does not exist, a cusp in MC can be attributed to WAL-like signature well described by the Hikami–Larkin–Nagaoka (HLN) framework. Closer to the transition (), we observe signatures consistent with Berezinskii–Kosterlitz–Thouless (BKT) correlations, underscoring that the dominant physics is set by collective, pairing-driven behavior rather than single-particle quantum interference. Measurements on non-superconducting control samples show no WAL-like features, indicating that the WAL over narrow temperature window, emerges only in conjunction with superconducting fluctuations. Hall measurements further reveal a concomitant sign reversal of the dominant carrier response, pointing to a substantial reorganization of transverse transport coincident with the onset of superconductivity. Together, these observations establish that magnetotransport in BSCCO thin film.
Introduction
Quantum corrections to the normal-state conductivity provide a sensitive probe of the underlying electronic correlations in low-dimensional and disordered systems [1, 2, 3, 4, 5, 6]. In materials proximate to a superconducting instability these corrections are frequently dominated by fluctuation effects rather than by weak localization phenomena alone. Above the superconducting transition temperature, , thermodynamic fluctuations of the superconducting order parameter give rise to transient Cooper pairs, which provide an additional conduction channel known as superconducting fluctuations (SF). This results in excess conductivity comprising contributions from the Aslamazov–Larkin (AL) and Maki–Thompson (MT) correction terms [3]. These fluctuation-induced corrections are strongly temperature- and field-dependent, and in systems with strong spin–orbit coupling or specific disorder configurations they can coexist with, or even dominate, quantum interference corrections [3, 5, 7]. While the Hikami–Larkin–Nagaoka (HLN) formalism [8] is conventionally invoked to describe the low-field magnetoconductance (MC) cusp in such systems, a cusp-like feature of this form is not by itself sufficient to establish a WAL origin, since AL- and MT-type fluctuation corrections can produce a qualitatively similar MC signature in the vicinity of .
This ambiguity becomes particularly relevant at elevated temperatures, where genuine WAL is expected to be strongly suppressed: phase coherence lengths shrink rapidly once inelastic electron–phonon and electron–electron scattering set in. In a purely normal-state picture, WAL-like corrections should survive only over a narrow window of temperature and field except in materials with unusually strong spin–orbit coupling or unconventional band structures [9, 10, 11].
In superconductors, the persistence of a cusp in MC well beyond this expected window is therefore more naturally understood as a signature of superconducting fluctuations that grow in strength as , rather than as an intrinsic weak anti-localization effect. This motivates a quantitative analysis in which the low-field MC is examined not solely within the HLN framework but as a possible crossover between a WAL-like quantum correction at temperatures well above and fluctuation-dominated (AL/MT) regime on approach to the superconducting transition [3].
High-temperature superconductors provide a fertile platform for exploring such unconventional quantum transport phenomena [12, 13, 14, 15]. Among them, (BSCCO) is a prototypical layered superconductor characterized by strong electronic correlations, pronounced anisotropy, and a complex Fermi surface that evolves with temperature and doping [16, 17, 18]. Transport in BSCCO thin films often exhibits quasi-two-dimensional behavior, making them well suited for investigating quantum interference phenomena in close proximity to SF [19, 20]. Fundamentally, the superconducting transition in such systems is described by a Berezinskii–Kosterlitz–Thouless (BKT) mechanism, associated with the unbinding of vortex–antivortex pairs and characterized by a transition temperature [19, 20, 21, 22, 23, 24].
Despite decades of intense investigation, however, a complete microscopic understanding of the normal-state and superconducting properties of the cuprates remains elusive. Whether the concepts developed for simple metals and BCS-like superconductors retain their validity in a strongly correlated high- superconductors is itself an open and largely unanswered question. In particular, the pairing mechanism in cuprate superconductors remains unresolved, and the electronic and transport properties in the vicinity of are considerably more complex than in conventional, weakly correlated superconductors, reflecting the interplay of strong correlations, pseudogap physics, and competing orders [12, 13, 16].
A crossover from WAL/WL-like feature to a rapidly growing SFs contribution has been reported in ultra-thin conventional -wave superconductors such as NbN [24], TiN [5] and [7]. Fluctuation phenomena in cuprates are further complicated by strong electronic correlations, a -wave pairing symmetry. SFs are indeed reported in BSCCO, however, the measurement methods are spectroscopic rather than via electronic transport [25, 26], our work aims to address this lacunae.
In this work, we report a smooth crossover from WAL-like MC to an SF-dominated regime in large-area, sputtered thin films of . We demonstrate that the appearance of WAL-like features is confined to a narrow temperature window immediately preceding the onset of the superconducting transition, where the low-field MC is well described by the HLN framework. As superconducting correlations strengthen, the MC deviates from HLN behavior and crosses over into the fluctuation-dominated regime. Measurements on non-superconducting control samples show no WAL-like features, indicating that these signatures arise specifically in conjunction with superconducting correlations. In addition, Hall measurements reveal a concomitant sign reversal of the dominant carrier response, suggesting a substantial modification of transverse transport coincident with the onset of superconductivity.
Results and Discussion
We initiate our investigation of the BSCCO samples by characterizing their crystal structure. The unit cell of 2212 phase, as obtained via CrystalMaker simulations is shown in Figure 1(a). Transmission electron microscopy (TEM) imaging reveals crystal lattices with incommensurate supermodulation predominantly oriented along the (119) crystallographic axis. Cross-sectional TEM images demonstrate polycrystalline ordering of atomic sites [Figure 1(a)]. Our samples exhibit 2212 phase of BSCCO, as seen via X-ray diffraction [Figure 1(b)] and TEM microscopy over multiple regions (see SI).

Figure 1. Crystal structure and transport measurements of BSCCO thin film: (a) Crystal structure of the 2212 phase of BSCCO generated using CrystalMaker software (left panel). Cross-sectional transmission electron microscopy (TEM) image of the BSCCO crystal, revealing atomic-scale lattice ordering (top right panel). False color optical microscope image of the Hall bar of BSCCO used for measurements (bottom right panel). (b) X-ray diffraction spectrum showing 2212 phase of BSCCO. (c) Schematic of the Hall bar measurement configuration. (d) Temperature-dependent resistance of the BSCCO thin film (thickness nm), with data fitted to SF model [eqn. (6)] and Halperin–Nelson (HN) model [eqn. (7)] as indicated in the legend. (e) Current–voltage (–) characteristics measured at different temperatures, plotted on a log–log scale. The left panel shows low-temperature data (65.5–69 K); the right panel shows high-temperature data (71–80 K). Black solid lines are linear fits using , corresponding to the power-law behavior . (f) Temperature dependence of the extracted exponent . The blue dashed line marks the universal BKT criterion ; its intersection with the curve defines the BKT transition temperature . Results shown are for sample B18, as indicated in the figures.
We probe the electronic transport properties using the standard four-point measurement configuration [Figure 1(c)] by measuring the resistance () as a function of temperature () [Figure 1(d)]. The temperature range of 78–88 K lies in the immediate vicinity above the superconducting transition, where thermally excited Cooper pairs are formed but long-range phase coherence has not yet been established. In this fluctuation regime, the conductivity acquires additional contributions from SFs: the Aslamazov–Larkin (AL) [27, 28], Maki–Thompson (MT) [29, 30, 31], and density-of-states (DOS) terms [32, 33]. The total conductance is
where the normal-state conductance is
with and the fitting parameters for the residual resistance (zero-temperature intercept) and temperature coefficient of resistance, respectively.
The AL term describes direct transport of thermally generated fluctuating Cooper pairs,
where is an effective fitting amplitude incorporating the theoretical prefactors, and is the mean-field transition temperature below which the order parameter acquires finite amplitude.
The MT term arises from coherent quasiparticle scattering mediated by fluctuating Cooper pairs,
where is the phase-coherence (dephasing) time and the corresponding amplitude.
The DOS term accounts for the reduced quasiparticle density of states due to transient Cooper-pair formation,
where is the quasiparticle scattering time and the corresponding amplitude. , , and are phenomenological amplitudes absorbing the theoretical prefactors while accounting for material-specific properties and experimental uncertainties. The experimental data in Figure 1(d) were fitted over 78–88 K using the sum of all SF contributions,
with the red solid line showing the best fit. The normal-state conductance was obtained from a linear fit to the high-temperature resistance. The combined SF fit yields K, with extracted scattering time s and phase-coherence time s. The fitting parameters and were constrained to physically reasonable ranges reported for disordered conductors and superconductors, where the elastic scattering time is typically of the order of – s and the phase-coherence time ranges from to s [34, 4, 35, 36].
The extracted amplitudes , , and are consistent with previously reported analyses of SF conductivity in disordered superconductors, where the AL, MT, and DOS contributions are found to be of comparable magnitude [37, 27, 38]. The good agreement between experiment and the SF fit indicates that transport in the range 78–100 K is governed primarily by SF. Closer to the zero-resistance state, below 78 K, the superconducting amplitude is already well developed, while phase coherence is progressively established. Transport is then controlled by phase fluctuations associated with the proliferation and binding of vortex–antivortex pairs. The resistance in this regime is therefore dominated by vortex dynamics rather than by amplitude fluctuations of the order parameter. The Halperin–Nelson expression [39], derived for the BKT transition, explicitly captures the exponential suppression of resistance due to vortex–antivortex binding and is thus appropriate for modeling the behavior close to the zero-resistance state. The Halperin–Nelson phase fluctuation expression is given by:
where is the BKT transition temperature and are fitting parameters. Applying this model over 68–78 K yields K. An excellent fit to the model implies that the transition is because of vortex-antivortex pairing and unbinding [40]; which is consistent with layered VdW nature of the material. Near , the current–voltage (–) characteristics provide critical insights into the superconducting-to-normal-metal transition mechanism [41, 24]. The BKT transition is characterized by a power-law relation between voltage and current, , where is the power-law exponent. The universal BKT transition is identified by the criterion . The transport measurements performed on the BSCCO thin films exhibit this characteristic power-law scaling in the – curves, consistent with the theoretical predictions of the BKT transition Figure 1(e). In the high-current regime, Ohmic dissipation, dominated by Joule heating, results in a linear – response with finite resistance right panel of Fig. 1(e), corresponding to for K [24]. Conversely, in the superconducting state, the voltage approaches zero due to the formation of bound vortex–antivortex pairs, which suppress free vortex motion and enable dissipationless current transport [40]. Near the superconducting phase boundary, the – characteristics become strongly nonlinear and are well described by the BKT power-law scaling, as illustrated in the left panel of Fig. 1(e).
The temperature-dependent power-law exponent, , was extracted from linear fits to the versus curves [Fig. 1(f)]. The intersection of the experimentally determined curve with the universal line yields a BKT transition temperature of K. This value is in close agreement with K obtained independently from the resistive transition measurements, further confirming the occurrence of a BKT transition in the BSCCO thin films. This minor temperature discrepancy ( K) between the two experimental approaches originates from fundamental differences in the vortex excitation mechanisms inherent to each measurement protocol: (i) – characterization employs current ramping, inducing vortex penetration from sample peripheries at the critical current threshold; (ii) versus measurements utilize thermal activation, promoting homogeneous vortex nucleation throughout the sample volume. These distinct vortex generation pathways result in different effective transition temperatures, reflecting the sensitivity of determination to the specific experimental methodology employed for probing the BKT phase transition. Figure 2(a) shows the normalized magnetoresistance, , of the BSCCO thin film measured with the magnetic field applied perpendicular to the film plane over a wide range of temperatures. At temperatures well below the superconducting transition temperature ( K), the sample exhibits zero resistance up to the lower critical field (). Beyond , the resistance increases gradually with the magnetic field, approaching the normal-state resistance.

Figure 2. (a) Normalized resistance of the sample as a function of out-of-plane magnetic field from T to T at different temperatures, as indicated by the color bar. (b–d) Magnetoconductance () versus out-of-plane magnetic field at 68 K, 72 K, and 78 K, respectively. The red solid lines represent fits to the SF model. (e) Magnetoconductance () versus out-of-plane magnetic field at 80 K, showing individual fits to the SF model (red solid line), a quadratic dependence (; magenta dotted line), and the HLN model (black solid line). (f–g) Magnetoconductance () as a function of the out-of-plane magnetic field at 82 K and 90 K, respectively, showing fits to the HLN model (black solid lines) and a quadratic dependence (; magenta dotted lines). (h) Resistance as a function of temperature, highlighting the different transport regimes identified from the analysis. These results are of sample B08D. The vs of this sample is shown in the Fig. S3, SI.
A pronounced low-field cusp in the magnetoconductance (MC) is observed across a broad temperature range, spanning the superconducting transition region and persisting to temperatures well above . Similar low-field MC cusps have been attributed to several mechanisms, including superconducting fluctuations (SF) [5, 2], vortex dynamics, Fermi-surface reconstruction [42], and quantum interference effects such as weak anti-localization (WAL) [43]. In the present study, the absence of any clear charge density wave-related features in the characteristics suggests that Fermi-surface reconstruction is unlikely to be the primary origin of the observed cusp, although it cannot be completely ruled out based on transport measurements. Therefore, to identify the dominant mechanism responsible for the low-field MC cusp, the experimental data were systematically analyzed using various theoretical models describing SF and quantum interference effects.
The applicability of these models depends on the dimensionality of the system. Since the phase coherence length extracted from the MC analysis at 68 K ( nm) is much larger than the film thickness, and the analysis together with the non-linear – characteristics exhibit BKT behavior, the BSCCO thin film can be treated as a quasi two-dimensional superconductor. This is further supported by an electron scattering time of s and a dephasing time of s extracted from the analysis, satisfying the condition [4, 44, 45] required for quantum interference effects. Therefore, two-dimensional theories of SF and WAL are appropriate for describing the present MC data.
In two-dimensional superconductors, SF persist above due to the formation of transient Cooper pairs, giving rise to fluctuation-induced excess conductivity. This excess conductivity is primarily described by two contributions: the Aslamazov–Larkin (AL) term [27, 28], which originates from the direct formation of transient Cooper pairs and dominates very close to [(], and the Maki-Thompson (MT) term [29, 30, 31], which arises from the coherent scattering of quasiparticles by fluctuating Cooper pairs before phase coherence is lost. Since both the AL and MT contributions are suppressed by an applied magnetic field, the fluctuation-induced conductivity decreases with increasing field, producing a characteristic low-field MC cusp.
A similar low-field cusp can also originate from WAL, a quantum interference effect arising from the destructive interference of time-reversed electron trajectories in the presence of strong spin–orbit coupling. An applied magnetic field suppresses this interference correction and consequently reduces the conductivity. Since SF and WAL give rise to qualitatively similar low-field MC signatures, distinguishing between these mechanisms based solely on the experimental MC curves is challenging.
Based on these considerations, the MC data were analyzed using theoretical models incorporating three quantum corrections to the conductivity: the AL contribution, the MT contribution, and WAL. Their relative contributions across different temperature regimes are discussed in the following sections. The MC can be expressed as the sum of the SF and WAL contributions,
where represents the conductivity correction arising from SF, while corresponds to the quantum interference correction associated with WAL. The WAL contribution is described by the HLN model [43],
where is the phase coherence length, is the digamma function, and is a dimensionless prefactor that characterizes the number of coherent transport channels.
The curves in the temperature range of 90–82 K are well described by the HLN model, as shown in Figure 2(g) and Figure 2(f), yielding excellent agreement with the experimental data. The genesis of WAL may be attributed to spin orbit coupling arising from heavy Bi atoms and the broken inversion symmetry at the film surface and the film/SrTiO interface. The extracted prefactor remains below unity (0.85 at 82 K, 0.15 at 90 K) throughout this temperature range [Figure 2(e)], consistent with transport dominated by weak antilocalization (WAL). In this regime, the WAL-induced MC correction is typically of the order of (approximately a few tens of S). However, below 80 K, the HLN model fails to adequately describe the experimental MC. The fitted prefactor exceeds unity, reaching unphysically large values, along with the drastic increase of the magnitude of from the S scale to the mS scale. The increase in suggests the emergence of additional contributions to the MC. While it may indicate multiple quantum-coherent transport channels [46] arising from the layered crystal structure and structural inhomogeneity of the sputtered BSCCO thin films, it also reflects the increasing contribution of SF as the temperature approaches . Consequently, the enhancement of indicates that both WAL and SF can be contributing simultaneously to the MC in this temperature regime. Non-superconducting control films show no such cusp, so we refer to this feature as WAL-like and to HLN as the functional form that describes it [see SI].
We have further compared a quadratic field dependence, , with the magnetoconductance data in the 82–90 K range [Figure 2(e–Figure 2g)], using the same magnetic-field interval ( to T) as in the HLN analysis. The quadratic model fails to reproduce the measured field dependence adequately, whereas the Hikami–Larkin–Nagaoka (HLN) expression provides a better description. This suggests that the observed magnetoconductance cannot be adequately described by a simple quadratic orbital contribution alone.
The SF contribution, , consists of two main components: the AL and MT contributions [1, 2, 47, 5, 6]. The AL contribution to the MC is given by
where is the quantum conductance, is the digamma function, and is the characteristic magnetic field associated with SF. The characteristic field is related to the Ginzburg–Landau relaxation time, , through
where
and the diffusion constant is given by
where is the upper critical field at zero temperature.
The MT contribution to the MC is expressed as
where
with
Here, represents the Larkin electron–electron interaction parameter in the limit , is the pair-breaking parameter determined by the dephasing time [2, 47], and is an additional fitting coefficient introduced to improve the agreement between the theoretical model and the experimental data [5]. Consequently, the effective strength of the MT contribution is characterized by the parameter .
The SF contribution to the MC is given by
This expression was used to fit the MC data in the temperature range of 68–80 K, as shown in Figure 2(b)–Figure 2(e). The fitting parameters included the superconducting transition temperature (), the MT fitting parameter (), the dephasing time (), and the diffusion constant (). Since is related to the zero-temperature upper critical field, Eq. (13), which for high- cuprates such as BSCCO is typically reported to lie in the range of 50 and 150 T [48, 49], the corresponding was constrained to the range of – m/s during the fitting procedure.
The superconducting transition temperature obtained from the measurements is approximately K. The extracted dephasing time, , increases from approximately s to s as the temperature approaches . Using the extracted values of and , the phase coherence length was calculated from [43, 4]
increases with decreasing temperature, reaching approximately 278 nm at 68 K, indicating the development of long-range phase coherence as the system approaches .
Overall, the experimental MC in the temperature range of 68 K–78 K is well described by the SF model. However, it fails to adequately describe the MC data at 80 K [Fig. 2(e)]. At the same temperature, the prefactor extracted from the HLN fit exceeds unity, indicating that the MC cannot be explained by the WAL or SF model alone. These observations suggest a narrow crossover region around 80 K, where SF and WAL coexist and contribute simultaneously to the observed MC.
Figure 2(h) summarizes the different transport regimes identified from the combined analysis of the temperature-dependent resistance and MC measurements. At temperatures well above the superconducting transition ( K), the sample exhibits normal metallic (NM) behavior, where the curve shows an approximately linear temperature dependence (refer to SI). Upon cooling below K, the transport enters a WAL regime spanning approximately 80 K to 90 K. In this temperature range, the MC is well described by the HLN model, indicating that quantum interference effects dominate the low-field transport.
As the temperature is further reduced below K, SF become significant, and the MC is well described by the SF model, indicating that fluctuation-induced Cooper pairs provide the dominant contribution to the conductivity. Close to K, a finite density of Cooper pairs develops, giving rise to a finite amplitude of the superconducting order parameter even though long-range phase coherence has not yet been established.
The temperature range between and corresponds to the BKT regime. The BKT analysis of the data yields a transition temperature of K (see SI). In this regime ( K–66.5 K), a finite superconducting order-parameter amplitude has already developed, while strong phase fluctuations prevent the establishment of long-range phase coherence. Below , vortex–antivortex pairs become bound, suppressing phase fluctuations and establishing long-range phase coherence, thereby resulting in a fully developed superconducting state with zero resistance.
Although Figure 2(h) divides the transport behavior into distinct regimes for clarity, the transitions between these regimes are expected to be gradual rather than abrupt. Consequently, narrow crossover regions may exist in which adjacent quantum transport mechanisms coexist.

Figure 3. (a) Hall resistance () versus out of plane magnetic field () at different temperature as indicated by the color bar. (b) Hall resistance () versus temperature at different out of plane magnetic field () as indicated by the color bar. These results are of sample B08D.
We next examine the temperature dependence of the Hall resistance in the BSCCO thin-film samples [Fig. 3(a)]. In conventional metals and semiconductors dominated by a single carrier type, the Hall carrier concentration is expected to be largely temperature independent, reflecting a stable carrier density and an essentially unchanged Fermi surface topology [50]. In marked contrast, the superconducting BSCCO films exhibit a strong temperature dependence in the slope of the Hall resistance. This behavior is most clearly evidenced by the temperature at which undergoes a sign reversal [Fig. 3(b)]. Notably, in the vicinity of the superconducting transition temperature, the Hall carrier concentration changes sign from hole-like to electron-like. At sufficiently low temperatures, the Hall resistance vanishes concomitant with the zero-resistance state. Such a Hall sign reversal near the superconducting transition indicates a breakdown of simple single-band transport and points to the participation of additional transport channels or collective excitations [51]. Hall sign reversal has previously been reported in cuprate superconductors and has been attributed to vortex dynamics governed by the Lorentz force and pinning effects [52]. Moreover, superconducting fluctuations and vortex-like excitations are known to strongly modify transverse transport coefficients above and near , giving rise to anomalous Hall responses [53]. This behavior may reflect a competition between normal-state quasiparticle transport and fluctuation-induced channels associated with Cooper pairing and vortex motion. Together, the correlated appearance of WAL-like MC and Hall sign reversal indicates a profound restructuring of the transport landscape in the vicinity of the superconducting transition, calling for theoretical descriptions that explicitly incorporate the interplay between quasiparticles, superconducting fluctuations, and vortex dynamics in cuprate thin films.
Conclusion
In summary, our magnetotransport study of large-area BSCCO thin films demonstrates that the approach to superconductivity in this system is governed primarily by SF rather than by only quantum interference. While a WAL-like correction to the MC is observed, it is confined to a narrow temperature window immediately preceding the SF, is well captured by the HLN framework only within that window, and breaks down rapidly as superconducting correlations strengthen. Furthermore, the results demonstrate a quasi two-dimensional transport as observed via the BKT transition in our thin films. This motivates future theoretical treatments of cuprate magnetotransport that prioritize the interplay between SF and interference corrections, rather than treating the two on equal footing. In addition, the large-area films synthesized and used in the experiments here are readily suitable for nano-fabrication, while the relatively straightforward growth technique offers a practical route toward realizing functional cryogenic devices [54, 55, 56] at high temperatures.
Experimental Section
Thin films of BiSrCaCuO (BSCCO) with thicknesses ranging from 35 nm to 100 nm were deposited using radio-frequency (RF) sputtering. A base pressure of mbar was achieved prior to deposition. Films were grown at a working pressure of mbar with argon introduced at a flow rate of 40 sccm. The RF power was maintained at 100 W, corresponding to a deposition rate of approximately 8–10 nm min. All films were deposited on (100)-oriented SrTiO substrates of size 5 mm 5 mm at room temperature. Following deposition, the films were annealed in an oxygen atmosphere at 850 °C for 1 h to promote crystallization and oxygenation.
Methodology
Film thicknesses were determined using atomic force microscopy (AFM) (see Supporting Information for details). The samples were subsequently patterned into Hall bar geometries by mechanical scribing [lower panel of Figure 1(a)], a procedure chosen to preserve sample integrity by avoiding chemical processing associated with conventional lithography. Electrical transport measurements were performed using a Keithley 6221 current source and 2182 nanovoltmeter in delta-mode configuration. Low-temperature measurements were carried out in a cryogen-free measurement system equipped with a superconducting magnet for applying out-of-plane magnetic fields. Anti-symmetrization
of the Hall signal corresponds to . Therefore, Hall resistance was measured in both and , so that any spurious even-in-field is eliminated.
Supporting Information
Additional supporting information can be found online in the Supporting Information section. Supporting File: SuppMat.docx.
Acknowledgements
DS thanks IISc start-up grant, Ministry of Electronics and Information Technology (MeiTy), Govt. of India, Indian Space Research Organization (ISRO), Govt. of India for funding. Authors are grateful for funding from INOX Airproducts and IN-OXCVA for funding via CSR grants. DS thanks support from Infosys Foundation, Bangalore. PB thanks Anusandhan National Research Foundation, National Postdoctoral fellowship (PDF/2023/000444) for financial support. Authors are grateful to micro and nano characterization facility, CeNSE, IISc and national nano-fabrication facility, CeNSE, IISc both supported by Government of India, for facilities usage.
Supplementary Text for “Superconducting Fluctuation Driven Quantum Transport in Thin Films”
Sohini Guin; Naresh Shyaga; Jagadish Rajendran; Aryaman Das; Subhransu Kumar Negi; Saisab Bhowmik; Pankaj Bhardwaj; Chandni Usha; Dhavala Suri
Structural Characterization of BSCCO Thin Films

Figure S1. Microscopic images: (a) Plot of height versus position used for thickness calculation, with the inset showing an atomic force microscopy (AFM) image of strips of the BSCCO film (sample B08D). (b) Transmission electron microscopy (TEM) image displaying the inter-planar spacing , Inset shows selected area electron diffraction (SAED) pattern.
To calculate the -spacing and identify the phase of our BSCCO films, we analyse the selected area diffraction (SAED) pattern. A line profile from the inverse fast Fourier transform gives the value of -spacing as 0.264 nm, which corresponds to the [119] reflection plane in the 2212 phase of BSCCO. The obtained from the vs measurements agrees with 2212 phase of BSCCO.
Temperature-dependent Magnetoconductance of sample B18

Figure S2. Magnetoconductance of B18 sample: Panel showing magnetoconductance ( vs ) for sample B18 at different temperatures as indicated in the legend. The red solid line represents the SF fitting. The black solid line represents the HLN (WAL) fitting. The extracted fit parameters are shown in the legend.
The detailed and I-V analyses of sample B18 are presented in the main text (Figure 1). Here, we present the corresponding magnetoconductance (MC) analysis of the same sample to demonstrate the reproducibility of our results. From the analysis, the transition temperature was determined to be K using the combined SF fit [Eq. (6) in the main text], while the BKT transition temperature was obtained as K using the HN fit [Eq. (7) in the main text].
The MC data were analyzed over three distinct temperature regimes. In the temperature range of 80-100 K, the MC data are well described by the SF model [Eq. (17) in the main text], indicating that transport is dominated by SF. This is consistent with the analysis (Figure 1), which also identifies this temperature window as the SF regime. Above 100 K, superconducting fluctuations are absent; however, a narrow crossover region between 100 and 110K still exhibits a low-field cusp in the MC, which is well described by the WAL model [Eq. (9) in the main text].
Below (76.19 K) the SF model is no longer applicable since a finite superconducting amplitude has already developed. Instead, transport is dominated by phase fluctuations, where the low-field cusp in the MC can be attributed to vortex-driven transport.
A similar comprehensive MC analysis for another sample is presented in Figure 2 of the main text. The present results demonstrate that the observed transport behavior and the evolution of the MC across different temperature regimes are reproducible across multiple samples.
Resistance vs Temperature analysis of sample B08D
Figure S3 shows the linear fit to the normal state data using Eq. (2) from the main text. The linear dependence of resistance in the range 110–130 K confirms the metallic behavior of the film in the normal state. The fitting parameters, listed in the legend, were subsequently used as input for the combined superconducting fluctuation (SF) fit to the data using Eq. (6) of the main text.

Figure S3. Temperature-dependent resistance, , of sample B08D. (a) Linear fit to the normal-state data in the temperature range of 110–300 K. (b) Combined SF fit to the data in the temperature range of 72–80 K. (c) BKT fit to the data in the temperature range of 55–65 K.
Figure S3 presents the corresponding SF fit to the data in the temperature range of 72–80 K. The fitting yields a transition temperature of K, which is subsequently used in the MC analysis presented in Figure 2 of the main text.
Figure S3 shows the HN fit to the data using Eq. (7) of the main text over the temperature range of 55–65 K, yielding a K.
The combined analysis of the data (Figure S3) and the MC measurements (Figure 2 of the main text) enables the identification of distinct temperature regimes, each governed by a different transport mechanism, as summarized in Figure 2(h) of the main text. The results for sample B08D are in excellent agreement with those obtained for sample B18, demonstrating that the evolution of the transport mechanisms across the superconducting transition is highly reproducible across different samples.
and temperature-dependent measurements of an additional sample, B06C.
Figure S4 presents the transport data for an additional sample, B06C, to further demonstrate the reproducibility of our results. Figure S4 shows the temperature-dependent resistance, , together with the HN fit, confirming the BKT transition and the two-dimensional nature of superconductivity in the film. Figure S4-Figure S4) show the corresponding magnetoresistance, , measured at different temperatures. Similar to samples B18 and B08D, a pronounced low-field dip in (corresponding to a cusp in the magnetoconductance) is observed throughout the superconducting transition region. As discussed in the previous sections of the Supporting Information and in the main text, this cusp originates from different transport mechanisms in different temperature regimes. The observation of the same evolution of the MC in sample B06C further confirms that the transport behavior across the superconducting transition is highly reproducible across multiple samples.

Figure S4. Transport measurements of sample B06C. (a) Temperature-dependent resistance, , together with BKT fit. (b-f) Magnetic field dependence of the resistance, , measured at different temperatures in the range of 90-72 K.
R (T) and R (B) of an additional Non-Superconducting Sample B59g
Figure S5 presents the transport measurements of a non-superconducting BSCCO sample to further support the proposed transport mechanism. As discussed in the main text and the previous sections of the Supporting Information, the superconducting samples exhibit distinct transport regimes, with SF persisting over a broad temperature window above followed by a WAL dominated regime at higher temperatures.

Figure S5. Transport measurements of sample B59g: (a) Resistance versus temperature for an additional sample exhibiting semiconducting behavior down to low temperatures, indicative of localization effects or reduced carrier density. (b) Longitudinal resistance as a function of magnetic field for the semiconducting sample at 2 K.
In contrast, Figure S5 shows the temperature-dependent resistance, , of a semiconducting sample, which exhibits a negative temperature coefficient of resistance over the entire measured temperature range. Consequently, no superconducting transition or superconducting fluctuation regime is observed.
Figure S5 shows the corresponding field-dependent resistance, , measured at 2 K. A pronounced low-field cusp in (corresponding to a dip in the MC) is observed. However, unlike the superconducting samples (B18, B08D, and B06C), this sample does not exhibit superconductivity or superconducting fluctuations. This comparison demonstrates that the low-field cusp in the MC observed in the superconducting samples is fundamentally different in origin, arising from the evolution of superconductivity and its associated fluctuation regimes. In contrast, the dip in the MC of the semiconducting sample originates from disorder-induced weak localization (WL), rather than weak antilocalization (WAL).
Residual of the HLN fit to the magnetoconductance data shown in Figure 2 of the main text.
Figure S6 shows the residual of the HLN fit, defined as , over the same magnetic field range. The residual is randomly distributed about zero and does not exhibit any systematic trend or discernible feature, indicating that the HLN model adequately captures the low-field magnetoconductance at those specific temperature window without the need for an additional background contribution.

Figure S6. Residual analysis of the HLN fit to the MC data of sample B08D. (a) , at 82 K fitted using the HLN model (corresponding to Figure 2(f) in the main text). (b) Residual of the fit, obtained as , over the same magnetic field range.
| Sr. No. | Reference | Year | Sample Type | Thickness | Focus of Study | Remarks |
| 1 | Gorlova et al. Sov. J. Low Temp. Phys. | 1991 | Single crystal | - | BKT transition | Suppression by Abrikosov vortices in BSCCO crystals |
| 2 | Sergeeva et al. Sov. J. Low Temp. Phys. | 1991 | Single crystal | - | BKT transition | BKT-related vortex dynamics |
| 3 | Pradhan et al. Phys. Rev. B | 1993 | Single crystal | - | BKT transition | Vortex dynamics in BSCCO/BPSCCO crystals |
| 4 | Heine et al. Phys. Rev. B | 1999 | Single crystal | - | Magnetoresistance | Suppressed superconducting fluctuations |
| 5 | Zavaritsky et al. EPL | 2000 | Single crystal | - | Magnetoresistance | Quasi-linear negative MR in the normal state |
| 6 | Pallinger et al. Phys. Rev. B | 2008 | Single crystal | - | Magnetoresistance | Flux flow magnetoresistance |
| 7 | Lan et al. Phys. Rev. B | 2024 | Flake | Few-layers | Magnetoresistance | Vortex-driven oscillations |
| 8 | Huang et al. Appl. Phys. Lett. | 2022 | Flake | 2 unit cells | BKT transition | 2D BKT transition in Bi2223 micro-bridges |
| 9 | Latyshev et al. Euro. Phys. Lett. | 1995 | Whisker | - | Magnetoresistance | Suppressed 2D superconducting fluctuations |
| 10 | Gorlova et al. Physica B; JETP Lett. | 1998, 2000 | Whisker | - | BKT transition | Edge effects smear the BKT transition in narrow samples |
| 11 | Sefrioui et al. Phys. Rev. B | 2004 | Thin film | Not reported | BKT transition | Vortex dynamics in BSCCO thin films |
Table S1. Brief summary of works so far on BKT physics and Magnetoresistance studies in BSCCO.
| 12 | Zhang et al. RSC Adv. | 2023 | Thin film | Not reported | BKT transition | Phase evolution in PLD-grown BSCCO thin films |
| 13 | This Work* | 2025 | Thin film | nm | BKT (R–T + I–V), SF and WAL (MR) | Observation of (i)Coexistence of superconducting fluctuation and WAL in BSCCO, (ii) sign reversal of Hall slope in BSCCO, (iv) corroboration of BKT physics via both IV and RT curves |
Table 1.
| Sample ID | Substrate | Substrate Temp (K) | Base Pressure (mbar) | Dep. Pressure (mbar) | RF Power (W) | Ar Flow (sccm) | Target–Substrate Distance (cm) | Annealing Gas O₂ (sccm) | Annealing Temp (°C) | Annealing Duration (hr) |
| B18 | STO | 300 | 100 | 40 | 1 | 880 | 1 | |||
| B08D | STO | 300 | 50 | 40 | 1 | 850 | 1 | |||
| B59g | STO | 300 | 100 | 40 | 1 | 830 | 3 | |||
| B06C | STO | 300 | 100 | 40 | 1 | 850 | 3 |
Table S2. Deposition parameters of all samples experimented on in this work.
| Sl. No. | Sample | Thickness (nm) | (K) | (K) | Coexistence of SF and WAL | Remarks |
| 1 | B18 | 40 | 67 | 79 | Yes | — |
| 2 | B08D | 35 | 33 | 74 | Yes | — |
| 3 | B59g | 120 | — | — | No | Non-superconducting; shows WL at 2 K; no SC, no WAL like cusp in MC |
| 4 | B06C | 100 | 78 | 82 | Yes | — |
Table S3. Summary of all samples experimented on in this report and observations.
References
- [1]G. Bergmann. “Quantum Corrections to the Resistance in Two-Dimensional Disordered Superconductors above T_c: Al, Sn, and Amorphous Bi₀.₉Tl₀.₁ Films.” Phys. Rev. B 29, no. 11 (1984): 6114–6128.
- [2]M. Giannouri, E. Rocofyllou, C. Papastaikoudis, and W. Schilling. “Weak Localization, Aslamazov-Larkin, and Maki-Thompson Superconducting Fluctuation Effects in Disordered Films Above T_c,” Physical Review B 56, no. 10 (1997): 6148–6156.
- [3]B. L. Altshuler, and A. G. Aronov. 1985. “Electron–Electron Interaction in Disordered Conductors.” In Electron–Electron Interactions in Disordered Systems, edited by A. L. Efros and M. Pollak, 1–153. Elsevier.DOI
- [4]P. A. Lee, and T. V. Ramakrishnan. “Disordered electronic systems.” Rev. Mod. Phys. 57, no. 2 (1985): 287–337.
- [5]Sachin Yadav, Bikash Gajar, R P Aloysius, and Sangeeta Sahoo. “Interplay between superconducting fluctuations and weak localization in disordered TiN thin films.” Nanoscale 16, no. 43 (2024): 20319–20330.DOI
- [6]J. Wang, W. Powers, Z. Zhang, M. Smith, B. J. McIntosh, S. K. Bac, L. Riney, M. Zhukovsky, T. Orlova, L. P. Rokhinson, Y. T. Hsu, X. Liu, and B. A. Assaf. “Observation of Coexisting Weak Localization and Superconducting Fluctuations in Strained Sn₁−xInₓTe Thin Films.” Nano Lett. 22, no. 2 (2022): 792–800.DOI
- [7]Jiashu Wang, William Powers, Zhan Zhang, Michael Smith, Bradlee J McIntosh, Seul Ki Bac, Logan Riney, Maksym Zhukovsky, Tatyana Orlova, Leonid P Rokhinson, Yi-Ting Hsu, Xinyu Liu, and Badih A Assaf. “Observation of coexisting weak localization and superconducting fluctuations in strained Sn1-xInxTe thin films.” Nano Lett. 22, no. 2 (2022): 792–800.DOI
- [8]S. Hikami, A. I. Larkin, and Y. Nagaoka. “Spin-orbit interaction and magnetoresistance in the two dimensional random system.” Prog. Theor. Phys. 63, no. 2 (1980): 707–710.DOI
- [9]Z. Li, D. Guo, K. Huang, G. Ma, X. Liu, Y. Wu, J. Yuan, Z. Tao, B. Wang, X. Wang, Z. Zou, N. Yu, G. Yu, J. Xue, Z. Liu, W. Ji, J. Li, and Y. Guo. “Robust weak antilocalization effect up to ∼120 K in the van der Waals crystal Fe₅−xGeTe₂ with near-room-temperature ferromagnetism.” J. Phys. Chem. Lett. 14, no. 23 (2023): 5456–5465.
- [10]Y. A. Salawu, J. H. Yun, J.-S. Rhyhee, M. Sasaki, and H.-J. Kim. “Weak antilocalization, spin–orbit interaction, and phase coherence length of a Dirac semimetal Bi₀.₉₇Sb₀.₀₃.” Sci. Rep. 12, no. 1 (2022): 2845.DOI
- [11]Y. Kumar, R. Sultana, and V. P. S. Awana. “Comprehensive analysis for the high field magneto-conductivity of Bi₂Te₃ single crystal.” Physica B: Condens. Matter 609 (2021): 412759.DOI
- [12]J. Ayres, M. Berben, Ch. Ülo, Y.-T. Hsu, E. van Heumen, Y. Huang, J. Zaanen, T. Kondo, T. Takeuchi, J. R. Cooper, C. Putzke, S. Friedemann, A. Carrington, and N. E. Hussey. “Incoherent transport across the strange-metal regime of overdoped cuprates.” Nature 595, no. 7869 (2021): 661–666.
- [13]D. Pelc, P. Popčević, M. Požek, M. Greven, and N. Barišić. “Unusual behavior of cuprates explained by heterogeneous charge localization.” Sci. Adv. 5, no. 1 (2019): eaau4538.DOI
- [14]Z.-A. Ren, J. Yang, W. Lu, W. Yi, G.-C. Che, X.-L. Dong, L. Sun, and Z. Zhao. “Superconductivity at 52 K in iron-based F-doped layered quaternary compound Pr(O₁₋ₓFₓ)FeAs.” Mater. Res. Innov. 12, no. 3 (2008): 105–106.DOI
- [15]Y. A. Izyumov, and E. Z. Kurmaev. “FeAs systems: a new class of high-temperature superconductors.” Phys.-Usp. 51, no. 12 (2008): 1261.
- [16]I. K. Drozdov, I. Pletikosić, C.-K. Kim, K. Fujita, G. D. Gu, J. C. S. Davis, P. D. Johnson, I. Božović, and T. Valla. “Phase Diagram of Bi₂Sr₂CaCu₂O₈+δ Revisited.” Nat. Commun. 9, no. 1 (2018): 5210.DOI
- [17]Zhi-Xun Shen, D. S. Dessau, and B. O. Wells. 1991. “Electronic Structure and the Superconducting Gap of Bi₂Sr₂CaCu₂O₈+δ.” In High-Temperature Superconductivity: Physical Properties, Microscopic Theory, and Mechanisms, edited by J. Ashkenazi, S. E. Barnes, F. Zuo, G. C. Vezzoli, and B. M. Klein, 113–118. Boston: Springer.DOI
- [18]P. Zareapour, A. Hayat, S. Y. F. Zhao, M. Kreshchuk, A. Jain, D. C. Kwok, N. Lee, S.-W. Cheong, Z. Xu, A. Yang, G. D. Gu, S. Jia, R. J. Cava, and K. S. Burch. “Proximity-induced high-temperature superconductivity in the topological insulators Bi₂Se₃ and Bi₂Te₃.” Nat. Commun. 3, no. 1 (2012): 1056.DOI
- [19]S. Y. Wang, Y. Yu, J. Hao, K. Liang, B. Xiang, J. Zhu, J. Y. S. Lin, Y. Pan, G. Gu, K. Watanabe, T. Taniguchi, Y. Qi, Y. Zhang, and Y. H. Wang. “Oscillating Paramagnetic Meissner Effect and Berezinskii-Kosterlitz-Thouless Transition in Underdoped Bi₂Sr₂CaCu₂O₈+δ.” Natl. Sci. Rev. 11, no. 5 (2023).DOI
- [20]J. Kötzler, and H. S. Kwok. “Two-dimensional fluctuations close to the zero-field transition of Bi₂Sr₂CaCu₂O₈.” Phys. Rev. B 56, no. 21 (1997): 13734–13737.DOI
- [21]Q. Y. Ying, and H. S. Kwok. “Kosterlitz-Thouless transition and conductivity fluctuations in Y-Ba-Cu-O thin films.” Phys. Rev. B 42, no. 4 (1990): 2242–2247.pubmed.ncbi.nlm.nih.gov/9995670
- [22]M. Mondal, S. Kumar, M. Chand, A. Kamlapure, G. Saraswat, G. Seibold, L. Benfatto, and P. Raychaudhuri. “Role of the vortex-core energy on the Berezinskii-Kosterlitz-Thouless transition in thin films of NbN.” Phys. Rev. Lett. 107, no. 21 (2011): 217003.pubmed.ncbi.nlm.nih.gov/22181915
- [23]J. Yong, T. R. Lemberger, L. Benfatto, K. Ilin, and M. Siegel. “Robustness of the Berezinskii-Kosterlitz-Thouless transition in ultrathin NbN films near the superconductor-insulator transition.” Phys. Rev. B 87, no. 18 (2013): 184505.DOI
- [24]A. Weitzel, L. Pfaffinger, I. Maccari, K. Kronfeldner, T. Huber, L. Fuchs, J. Mallord, S. Linzen, E. Il’ichev, N. Paradiso, and C. Strunk. “Sharpness of the Berezinskii-Kosterlitz-Thouless transition in disordered NbN films.” Phys. Rev. Lett. 131, no. 18 (2023): 186002.DOI
- [25]Yu He, Su-Di Chen, Zi-Xiang Li, Dan Zhao, Dongjoon Song, Yoshiyuki Yoshida, Hiroshi Aizaki, Tao Wu, Xian-Hui Chen, Dong-Hui Lu, Christoph Meingast, Thomas P. Devereaux, Robert J. Birgeneau, Makoto Hashimoto, Dung-Hai Lee, and Zhi-Xun Shen. “Superconducting Fluctuations in Overdoped Bi₂Sr₂CaCu₂O₈+δ.” Phys. Rev. X 11 (2021): 031068.
- [26]Su-Di Chen, Makoto Hashimoto, Yu He, Dongjoon Song, Ke-Jun Xu, Jun-Feng He, Thomas P Devereaux, Hiroshi Eisaki, Dong-Hui Lu, Jan Zaanen, and Zhi-Xun Shen. “Incoherent strange metal sharply bounded by a critical doping in Bi₂₂₁₂.” Science 366, no. 6469 (2019): 1099–1102.
- [27]L. G. Aslamasov, and A. I. Larkin. “The influence of fluctuation pairing of electrons on the conductivity of normal metal.” Phys. Lett. A 26, no. 6 (1968): 238–239.DOI
- [28]M. H. Redi. “Two-Dimensional Fluctuation-Induced Conductivity above the Critical Temperatures.” Physical Review B 16, no. 5 (1977): 2027–2033.DOI
- [29]A. I. Larkin. “Effect of Fluctuations on the Properties of a Two-Dimensional Superconductor.” JETP Letters 31, no. 4 (1980): 219–222.
- [30]R. S. Thompson. “Microwave, flux flow, and fluctuation resistance of dirty type-II superconductors.” Phys. Rev. B 1, no. 1 (1970): 327–333.
- [31]K. Maki. “The Critical Fluctuation of the Order Parameter in a Superconductor. I.” Progress of Theoretical Physics 40, no. 2 (1968): 193–200.DOI
- [32]V. V. Dorin, R. A. Klemm, A. A. Varlamov, A. I. Buzdin, and D. V. Livanov. “Fluctuation Conductivity of Layered Superconductors in a Perpendicular Magnetic Field.” Physical Review B 48, no. 17 (1993): 12951–12965.pubmed.ncbi.nlm.nih.gov/10007671
- [33]L. B. Ioffe, A. I. Larkin, A. A. Varlamov, and L. Yu. “Effect of Superconducting Fluctuations on the Transverse Resistance of High-Tc Superconductors.” Physical Review B 47, no. 14 (1993): 8936–8941.pubmed.ncbi.nlm.nih.gov/10004941
- [34]M Truccato, A Agostino, G Rinaudo, S Cagliero, and M Panetta. “Possible dominance of the Maki–Thompson process in the fluctuation conductivity of Bi-2212 superconducting whiskers.” Journal of Physics: Condensed Matter 18, no. 35 (2006): 8295.
- [35]B. L. Altshuler, M. E. Gershenson, and I. L. Aleiner. “Phase relaxation of electrons in disordered conductors.” Physica E: Low-dimensional Systems and Nanostructures 3, no. 1 (1998): 58–68.
- [36]M. A. Skvortsov, A. I. Larkin, and M. V. Feigel’man. “Dephasing in Disordered Metals with Superconductive Grains.” Phys. Rev. Lett. 92 (2004): 247002.
- [37]A. Larkin, and A. Varlamov. 2005. Theory of Fluctuations in Superconductors. Oxford University Press.DOI
- [38]Kazumi Maki, and R. S. Thompson. “Fluctuation conductivity of high-Tc superconductors.” Phys. Rev. B 39 (1989): 2767–2770.pubmed.ncbi.nlm.nih.gov/9948538
- [39]B. I. Halperin, and D. R. Nelson. “Resistive transition in superconducting films.” J Low Temp. Phys. 36, no. 5 (1979): 599–616.DOI
- [40]J. M. Kosterlitz, and D. J. Thouless. “Ordering, metastability and phase transitions in two-dimensional systems.” J. Phys. 6, no. 7 (1973): 1181.
- [41]G. Venditti, J. Biscaras, S. Hurand, N. Bergeal, J. Lesueur, A. Dogra, R. C. Budhani, Mintu Mondal, John Jesudasan, Pratap Raychaudhuri, S. Caprara, and L. Benfatto. “Nonlinear I–V characteristics of two-dimensional superconductors: Berezinskii-Kosterlitz-Thouless physics versus inhomogeneity.” Phys. Rev. B 100, no. 6 (2019): 064506.DOI
- [42]A. E. Koshelev, R. Chapai, D. Y. Chung, J. F. Mitchell, and U. Welp. “Origin of anomalous magnetotransport in kagome superconductors AV₃Sb₅ (A = K,Rb,Cs).” Phys. Rev. B 110 (2024): 024512.
- [43]S. Hikami, A. I. Larkin, and Y. Nagaoka. “Spin-Orbit Interaction and Magnetoresistance in the Two-Dimensional Random System.” Progress of Theoretical Physics 63, no. 2 (1980): 707–710.DOI
- [44]I. L. Aleiner, B. L. Altshuler, and M. E. Gershenson. “Interaction Effects and Phase Relaxation in Disordered Systems.” Waves in Random Media 9, no. 2 (1999): 201–239.DOI
- [45]G. Brunthaler, A. Prinz, G. Bauer, and V. M. Pudalov. “Exclusion of Quantum Coherence as the Origin of the 2D Metallic State in High-Mobility Silicon Inversion Layers.” Physical Review Letters 87, no. 9 (2001): 096802.pubmed.ncbi.nlm.nih.gov/11531587
- [46]N. Shyaga, R. Sarkar, L. Nanda, R. Chakraborty, S. K. Negi, A. Baral, J. Rajendran, S. Narasimhan, and D. Suri. “Multi-channel conduction in electron transport dynamics of three dimensional topological insulators.” J. Phys.: Condens. Matter 37, no. 27 (2025): 275701.DOI
- [47]D. T. Harris, N. Campbell, R. Uecker, M. Brützam, D. G. Schlom, A. Levchenko, M. S. Rzchowski, and C.-B. Eom. “Superconductivity-Localization Interplay and Fluctuation Magnetoresistance in Epitaxial BaPb₁−xBiₓO₃.” Physical Review Materials 2, no. 4 (2018): 041801.
- [48]Yayu Wang, S. Ono, Y. Onose, G. Gu, Yoichi Ando, Y. Tokura, S. Uchida, and N. P. Ong. “Dependence of Upper Critical Field and Pairing Strength on Doping in Cuprates.” Science 299, no. 5603 (2003): 86–89.
- [49]V. N. Zavaritsky, M. Springford, and A. S. Alexandrov. “Negative magnetoresistance and upper critical field of Bi₂Sr₂CaCu₂O₈.” Physica B 294–295 (2001): 363–366.DOI
- [50]N. W. Ashcroft, and N. D. Mermin. 1976. Solid State Physics. Holt, Rinehart and Winston.
- [51]E. Sterpetti, J. Biscaras, A. Erb, and A. Shukla. “Comprehensive phase diagram of two-dimensional space charge doped Bi₂Sr₂CaCu₂O₈+x.” Nat. Commun. 8, no. 1 (2017): 1–8.DOI
- [52]S. Y. F. Zhao, N. Poccia, M. G. Panetta, C. Yu, J. W. Johnson, H. Yoo, R. Zhong, G. D. Gu, K. Watanabe, T. Taniguchi, S. V. Postolova, V. M. Vinokur, and P. Kim. “Sign-reversing Hall effect in atomically thin high-temperature Bi₂.₁Sr₁.₉CaCu₂O₈+δ superconductors.” Phys. Rev. Lett. 122, no. 24 (2019): 247001.
- [53]D. Pelc, M. J. Veit, C. J. Dorow, Y. Ge, N. Barišić, and M. Greven. “Resistivity phase diagram of cuprates revisited.” Phys. Rev. B 102, no. 7 (2020): 075114.DOI
- [54]J. Ingla-Aynés, Y. Hou, S. Wang, E.-D. Chu, O. A. Mukhanov, P. Wei, and J. S. Moodera. “Efficient superconducting diodes and rectifiers for quantum circuitry.” Nat. Electron. 8, no. 5 (2025): 411–416.DOI
- [55]M. Castellani, O. Medeiros, A. Buzzi, R. A. Foster, M. Colangelo, and K. K. Berggren. “A superconducting full-wave bridge rectifier.” Nat. Electron. 8, no. 5 (2025): 417–425.arxiv.org/abs/2406.12175
- [56]S. Ghosh, V. Patil, A. Basu, Kuldeep, A. Dutta, D. A. Jangade, R. Kulkarni, A. Thamizhavel, J. F. Steiner, F. von Oppen, and M. M. Deshmukh. “High-temperature Josephson diode.” Nat. Mater. 23, no. 5 (2024): 612–618.DOI