WorksPhysics and Astronomy
Modified Homotopic approach for diffractive production
Abstract
We review the recent developments of the use of the homotopy method for solving the non-linear evolution equation for the diffractive production in deep inelastic scattering. We introduce part of the non-linear corrections in the linear term. This simplified non-linear evolution equation is solved analytically taking into account the initial and boundary conditions for the process. It turns out that these corrections are rather small and can be estimated in the regular iterative procedure.
Introduction
In this paper we present a procedure to solve the non-linear equations for diffractive process that in QCD govern the dynamics in the saturation region. In our previous paper [1, 2] we found a solution of the Balitsky-Kovchegov (BK) equation [3, 4] that gives the dipole scattering amplitude using the homotopy approach. It has been shown that this approach allows us to collect all essential contribution into the linear equation which can be solved analytically, and to propose an iteration procedure, which is partly numerical and leads to small corrections.
For diffractive production we have several different kinematic regions for , where is the cross section of diffractive production with the rapidity gap larger than . The non-linear evolution equation for that describes these diffraction production in deep inelastic scattering has been derived in Ref. [5] and has the following form:
where is the elastic scattering amplitude of a dipole with size and rapidity and is the cross section of the diffractive production with the rapidity gap larger than at the impact parameter for the same scattering process.
In general, the homotopy method can be used as an effective procedure for solving an equation of the form , where the linear part is a differential or integral-differential operator, and the non-linear part has an arbitrary form. To solve it, we introduce the following equation for the homotopy function : . Solving this expression, we reconstruct the function
with . (2) gives the solution to the non-linear equation for . The hope is that several terms in this series will give a good approximation to the solution of the non-linear equation.
The linear equation is obvious in the perturbative QCD region (see Figure 1), where it is the BFKL equation. However, we will show that inside the saturation region (see Figure 1) we can find the linearized equation based on the approach of Ref. [6]. We demonstrate that the non-linear term, which includes the remains of the non-linear corrections, leads to small contributions and can be treated in the perturbation approach. This aspect has been discussed in Ref. [2], whose results are here briefly described.
Figure 1. Saturation region of QCD for the elastic scattering amplitude with and is the BFKL characteristic function. The critical line () is shown in red. The initial condition for scattering is given at and for heavy nuclei the initial condition is shown by the blue line. At the vertical blue dotted line the amplitudes described in region I and II are matched.
The kinematic region where we are looking for the solution for the scattering amplitude of a dipole () with a nucleus target in the plot with and axes is shown in Figure 1, where and . One can see that for we have the perturbative QCD region where the non-linear corrections are small and we can safely use the BFKL linear equation for the scattering amplitude. The geometrical scaling variable is defined as , with the saturation moment , , and denotes , where is the number of nucleons in a nucleus.
For the non-linear corrections become essential and we enter the saturation region. For the scattering with nuclei, the saturation region can be divided in two parts. For the amplitude has the geometric scaling behaviour [1] and depends only on one variable, . For this geometric scaling behaviour is broken. This process can be characterized by two kinematic regions: for and we can replace by the BFKL Pomeron. For and the elastic amplitude is in the saturation region and the production of gluons can be computed using the BFKL Pomeron exchange. Finally, and is the kinematic region where non-linear corrections for gluon production are essential.
It turns out that Eq. (1) can be rewritten in a simple form introducing a new function,
where is the solution of the BK equation. The new variables and are defined as and . This function has clear physics meaning: the inelastic cross section of all events with rapidity gap from to . Then, Eq. (1) in terms of the function takes the form of the BK equation, viz.
with the initial conditions ; it holds only in the region I, while in region II we have to use a more general expressions for the elastic scattering amplitudes (see Ref. [1]).
Our strategy for finding solution looks as follows: first we solve Eq. (4) with , and after that we return to Eq. (1).
Modified homotopy approach for and numerical estimation for
Including part of the non-linear term into the definition of , we can find the solution to non-linear equation of Eq. (4), suggested in Refs. [1]. Following the main ideas of Ref. [6], we solve Eq. (4) replacing by . For this function the equation takes the form
with the corresponding initial conditions for . We suggest to simplify the non-linear term replacing it by
This contribution stems from the region (see Ref. [6]) and, to find the solution , we need to solve the equation . Introducing , we can obtain the next general equation ,
which in the region I has traveling wave solution (Ref. [7]) with the geometric scaling behaviour, that can be found from the following implicit equation:
as well as can be found using the boundary conditions. We can solve the Eq. (8) for , and obtain which is given by
where is the Levin-Tuchin solution [6]. In the region II, is described by the equation
where and , whose solution is given again by the implicit traveling wave solution (see Eq. (8)). Therefore for we have
Now, we are in condition to use the homotopic approach to obtain the first correction from the general equation valid in the region I and II:
where the non-linear contribution is given by
For numerical estimation we have to insert in the non-linear term and the particular solution in the region I with geometric scaling is given by
In Figure 2 we present the numerical estimates for and the ratio turns out to be small. In the region II has been found in our previous paper [1] (see Eq. 58-67) and has the same form as Eq. (13) with . Finally, the solution has the following form:
!Plot of bbox=0.27,0.20,0.47,0.29
(a) Fig. 2-a

(b) Fig. 2-b
Figure 2. Fig. 2-a describes the ratio . Fig. 2-b describes versus for . is taken to be 3, .
which vanishes at and in the region of large this contribution is rather small.
Conclusions
Using the modified homotopy approach we found that the first iteration of the homotopy approach gives the main contribution in both kinematic regions which we consider for the diffractive production. We also found that for our solution shows the geometric scaling behaviour, while for this behaviour is strongly violated. We found that the analytical solution of the non-linear equation, reproduces the initial and boundary conditions. The second iteration with zero initial and boundary conditions turns out to be small and could be taken into account together with higher iterations using the regular perturbative procedure.
Acknowledgments
This research was supported by Fondecyt (Chile) grant No. 1231829. J.G. express his gratitude to the PhD scholarship USM-DP No. 029/2024.
References
- [1]C. Contreras, E. Levin, and R. Meneses, Phys. Rev. D, 107(9):094030, 2023.
- [2]C. Contreras, J. Garrido, E. Levin, and R. Meneses, Phys. Rev. D, 110(5):054045, 2024.
- [3]I. Balitsky, Nucl. Phys. B, 463:99, 160, 1996.
- [4]Y.V. Kovchegov, Phys. Rev. D, 60:014020, 034008, 1999.
- [5]Y. V. Kovchegov and E. Levin, Nucl.Phys. B, 577:221, 239, 2000.
- [6]E. Levin and K. Tuchin, Nucl.Phys. B, 573:833, 852, 2000.
- [7]A.D. Polyanin and V.F. Zaitsev, CRC Press, 2004.
