betaFeedback

WorksMathematics

Existence of global weak solutions for a simplified Ericksen-Leslie fluid interacting with a rigid body

Abstract

In this paper, we consider a three-dimensional nematic liquid crystal governed by the simplified Ericksen-Leslie system interacting with a moving rigid body. We prove the existence of global weak solutions, where we especially treat the case of contact with the container wall. The director field d\boldsymbol{d} satisfies ∣d∣=1|\boldsymbol{d}| = 1 as well as d3≥0d_3 \ge 0, and its non-homogeneous Dirichlet boundary condition on the body interface, referred to as strong anchoring, is transported with the rigid motion. The moving-domain problem with the above director condition is obtained as a limit of a Ginzburg-Landau regularization. An extension of the director to the body domain yields global compactness, while a compactness argument as in the seminal work by Lin and Wang [39] yields strong convergence away from the interface. If the body is in contact with the wall, we impose a perfectly inelastic sticking law. Since the resulting domain after contact is not necessarily Lipschitz, we prove weak existence for the simplified Ericksen-Leslie model on arbitrary bounded open sets, which is of independent interest.

Introduction

The Ericksen–Leslie theory couples incompressible flow to a unit-vector director describing the local orientation of a nematic liquid crystal. We refer to Ericksen [14] and Leslie [36], the monographs [3, 11], and the surveys [2, 46] for a comprehensive overview of liquid crystal models. The pointwise constraint ∣d∣=1|\mathbf{d}| = 1 present in Ericksen–Leslie models is analytically delicate in three dimensions, because the natural energy bounds give only weak H1H^1-compactness, which does not identify the quadratic Ericksen stress and allows concentration of the director energy.

The interaction problem of an Ericksen–Leslie model with a rigid body combines the Ericksen–Leslie description of a nematic flow with Newton’s laws, giving rise to a moving boundary problem in which the fluid velocity, the molecular orientation, expressed by the director field, and the rigid motion are coupled. Mechanically, a significant difficulty arises due to the so-called anchoring at the surface of the rigid body. It produces viscous forces and additionally distorts the director field, generating elastic forces. Mathematically, this is expressed by a non-homogeneous Dirichlet boundary condition of the director field. Another important aspect in this context of the possibility of contact of the rigid body with the outer boundary of the fluid container.

In this paper, we study this coupling for the simplified Ericksen–Leslie system introduced by Lin [37]. The fluid is subject to no-slip boundary conditions, while the director d=(d1,d2,d3)\mathbf{d} = (d_1,d_2,d_3) satisfies the condition ∣d∣=1|\mathbf{d}| = 1 as well as d3≥0d_3 \ge0, and its boundary values on the body are fixed in material coordinate. Our main result, Theorem 2.3, constructs a finite-energy weak solution up to the first wall contact and continues it afterwards under permanent sticking, i.e., the rigid body is assumed to remain attached to the outer fluid boundary after contact. Moreover, in Corollary 2.10, we provide an explicit lower bound for the contact time.

The solution to the interaction problem of the Ericksen–Leslie model including the aforementioned director condition is obtained by passing to the limit in a Ginzburg–Landau regularization. On fixed domains, the corresponding regularized model was analyzed by Lin and Liu [38]. In their Markdown 2020 Mathematics Subject Classification. 35Q35, 76A15, 74F10, 76D03, 35K59.

Key words and phrases. Simplified Ericksen–Leslie model, fluid – rigid body interaction, global weak solutions, moving-domain singular limits, Ginzburg–Landau approximation, wall contact. seminal work [39], Lin and Wang proved global existence of a weak solution to the simplified Ericksen–Leslie model with director condition. The essential input from [39] for the present work is a strong compactness result for approximate harmonic maps in the interior of the fluid domain, see Lemma 4.3. An additional difficulty in this article is that we need to extend the director through the body. This extension satisfies a transport equation on the whole fluid–rigid body container, which paves the way for global strong L2L^2-compactness.

Since the domain resulting from a contact of the rigid body with the outer boundary may have cusps or several components, we prove in Theorem 2.6 the existence of a weak solution to the simplified Ericksen–Leslie model with director condition on arbitrary open sets. The proof uses the variational Dirichlet Laplacian, compactness of the zero-extension, and a compactness argument à la Lin–Wang in the interior, without imposing regularity on the boundary.

For the analysis of Ericksen–Leslie models on fixed domains, we refer to [20] for smooth relaxation limits, [35] for weak solutions in the axisymmetric setting, [9, 30, 31, 48] for strong solutions, or [34, 49] for singularity formation and regularity. A different description of liquid crystals is due to Beris and Edwards [3], where the molecular orientation is described by tensors that are symmetric and have trace zero. The mathematical analysis of such QQ-tensor models on fixed domains has been carried out in [1, 18, 29, 42, 43, 44, 47].

In the context of interaction problems of viscous incompressible fluids with a rigid body, we refer, e.g., to [10, 12, 13, 16, 17, 27, 45] for existence results of weak solutions, while strong well-posedness and the long-time behavior of such fluid–rigid interaction problems has, for example, been discussed in [15, 22]. Recent work concerns regularity of weak solutions [41], small-body and vanishing-body limits [8, 19, 28], and multi-particle or long-time regimes [7]. The behavior near contact is especially sensitive to the boundary condition. Under no slip, non-collision and blow-up mechanisms were studied in [32, 33], while the case with slip was analyzed in [25, 26].

For liquid crystals coupled to a rigid body, Binz et al. [4] proved local strong well-posedness and global strong existence near equilibria for the simplified Ericksen–Leslie system with Neumann director conditions. Brandt et al. [6] proved similar results in the context of the general QQ-tensor model. Geng et al. [24] constructed global weak solutions for a rigid body in a QQ-tensor fluid, including the discussion of wall contact. Mensah [40] considered a two-dimensional simplified Ericksen–Leslie fluid coupled to a flexible shell.

It is worthwhile comparing our result to the previous works [4, 24]. In fact, we allow for general data in the natural finite-energy class, so in particular, compared to [4], we consider lower regularity for the initial data, and we do not require a smallness assumption to infer the global-in-time existence of a solution. In addition, we discuss the case of contact of the rigid body with the fluid boundary, which has been omitted in the work [4] on strong solutions. Let us emphasize that we address the simplified Ericksen–Leslie model including the director condition ∣d∣=1|d| = 1. This condition as well as the aforementioned anchoring of the rigid body, which is expressed via non-homogeneous Dirichlet boundary conditions, and which requires a delicate extension procedure, pose significant additional challenges compared to the work [24] in the context of the QQ-tensor model. To the best of our knowledge, this work is the first result on the global-in-time existence of solutions to the fluid–rigid body interaction problem of an Ericksen–Leslie liquid crystal model in three dimensions.

The rest of the paper is organized as follows. § 2 introduces the model, the weak formulations, and the main results, including energy estimates for the rigid displacement. In § 3, we construct solutions to the moving domain-problem of the Ginzburg–Landau regularization by removing a Galerkin approximation, a penalization of rigidity, and an artificial viscosity. This section also develops the fixed-domain Ginzburg–Landau theory on arbitrary bounded open sets. § 4 then carries out the singular limit ε→0\varepsilon\to0 on the moving domain. In § 5, the solution obtained from the singular limit passage is continued up to the first contact time and then also continued after impact, completing the proof of Theorem 2.3. Auxiliary results are proved in Appendix A.

Statement of the problem and main results

First of all, let us introduce some notations. We use CC for a general positive constant, C(a,b)C(a,b) for a positive constant that may depend on aa and bb and may change from line to line. For a measurable set QQ, let

Char⁡(Q):={χ∈L∞(Q):χ∈{0,1} a.e. in Q}\operatorname{Char}(Q):=\{\chi\in L^\infty(Q):\chi\in\{0,1\}\ \text{a.e. in }Q\}

denote the class of characteristic functions on QQ. For a fixed spatial domain GG, we abbreviate LtpXx:=Lp(0,T;X(G))L^p_tX_x:=L^p(0,T;X(G)) and Lt,xp:=Lp((0,T)×G)L^p_{t,x}:=L^p((0,T)\times G), and we use the same abbreviations for norms. Here G=ΩG=\Omega unless another domain is specified, and moving spatial domains are always displayed explicitly. We set H−1(G):=(H01(G))′H^{-1}(G):=(H^1_0(G))'. Time slices of Bochner functions are evaluated at their precise representatives on a common set of full measure, unless a continuous representative is specified.

The simplified Ericksen–Leslie model coupled with a rigid body

The simplified Ericksen–Leslie model coupled with a rigid body. We consider a rigid body interacting with a simplified Ericksen–Leslie fluid. The fluid density, viscosity, and solid density are normalized to one, and vector-valued quantities are written in boldface.

2.1.1. Geometric setting. Let Ω⊂R3\Omega\subset\mathbb{R}^3 be an open, bounded, and connected domain with boundary ∂Ω\partial\Omega of class C2C^2, representing the container in which the system evolves. A rigid body occupies, at initial time, an open, bounded, and connected domain S0⊂ΩS_0\subset\Omega with C2C^2-boundary, whose center of mass is located at the origin, i.e.,

1∣S0∣∫S0x dx=0.\frac{1}{|S_0|}\int_{S_0}x\,\mathrm{d}x=0.

Let T>0T>0 be a given final time. At each time t∈(0,T)t\in(0,T), the position of the rigid body is characterized by its center of mass h(t)∈R3h(t)\in\mathbb{R}^3 and a rotation matrix O(t)∈SO(3)O(t)\in SO(3), so that the solid domain is given by

S(t)={h(t)+O(t)y:y∈S0}.S(t)=\{h(t)+O(t)y:y\in S_0\}.

Before contact, S(t)‾⊂Ω\overline{S(t)}\subset\Omega, and the fluid domain at time tt is

F(t):=Ω∖S(t)‾,\mathcal{F}(t):=\Omega\setminus\overline{S(t)},

with initial fluid domain F0:=Ω∖S0‾\mathcal{F}_0:=\Omega\setminus\overline{S_0}. The rigid velocity is

uS(t,x)=ℓ(t)+ω(t)×(x−h(t)),(t,x)∈(0,T)×S(t),u^S(t,x)=\ell(t)+\omega(t)\times(x-h(t)),\qquad(t,x)\in(0,T)\times S(t),

where ℓ(t)=h′(t)\ell(t)=h'(t) denotes the translational velocity and ω(t)\omega(t) the angular velocity. To prescribe the director anchoring on the moving interface, let Z(t,y)Z(t,y) be the rigid flow map. Denote by m(t)m(t) the skew-symmetric matrix satisfying m(t)x=ω(t)×xm(t)x=\omega(t)\times x. Then

∂tZ(t,y)=m(t)(Z(t,y)−h(t))+ℓ(t),in (0,T)×R3,Z(0,y)=y,for y∈R3.(1)\begin{aligned} \partial_tZ(t,y)&=m(t)(Z(t,y)-h(t))+\ell(t), &&\text{in }(0,T)\times\mathbb{R}^3,\\ Z(0,y)&=y, &&\text{for }y\in\mathbb{R}^3. \tag*{(1)} \end{aligned}

Let O(t)∈SO(3)O(t)\in SO(3) solve O′(t)=m(t)O(t)O'(t)=m(t)O(t) with O(0)=I3O(0)=\mathbb{I}_3. Since h(0)=0h(0)=0, the solution of (1) is

Z(t,y)=h(t)+O(t)y.Z(t,y)=h(t)+O(t)y.

Write Zt(y):=Z(t,y)Z_t(y):=Z(t,y). Then S(t)=Zt(S0)S(t)=Z_t(S_0). The inverse (Zt)−1(Z_t)^{-1} solves

∂t(Zt)−1(x)=−O⊤(t)m(t)O(t)(Zt)−1(x)−O⊤(t)ℓ(t),in (0,T)×R3,(Z0)−1(x)=x,for x∈R3.(2)\begin{aligned} \partial_t(Z_t)^{-1}(x)&=-O^\top(t)m(t)O(t)(Z_t)^{-1}(x)-O^\top(t)\ell(t), &&\text{in }(0,T)\times\mathbb{R}^3,\\ (Z_0)^{-1}(x)&=x, &&\text{for }x\in\mathbb{R}^3. \tag*{(2)} \end{aligned}

Simplified Ericksen–Leslie equations

The fluid phase is governed by the simplified Ericksen–Leslie system introduced by Lin [37] and Lin–Liu [38]. The unknowns in the fluid region are the velocity uF\mathbf{u}^{\mathcal{F}}, the pressure π\pi, and the director field d\mathbf{d}. They are defined on (0,T)×F(t)(0,T) \times\mathcal{F}(t). Their values lie in R3\mathbb{R}^{3}, R\mathbb{R}, and S2\mathbb{S}^{2}, respectively, where

S2={f∈R3:∣f∣=1}\mathbb{S}^{2} = \{f \in\mathbb{R}^{3} : \lvert f\rvert= 1\}

denotes the unit sphere in R3\mathbb{R}^{3}. The condition ∣d∣=1\lvert\mathbf{d}\rvert= 1 is the director constraint.

The equations in the fluid domain are

{∂tuF+(uF⋅∇)uF−ΔuF+∇π=−div⁡((∇d)T∇d),in (0,T)×F(t),div⁡uF=0,in (0,T)×F(t),∂td+(uF⋅∇)d−Δd=∣∇d∣2d,in (0,T)×F(t),∣d∣=1,in (0,T)×F(t).(3)\begin{cases} \partial_{t}\mathbf{u}^{\mathcal{F}} + (\mathbf{u}^{\mathcal{F}} \cdot\nabla)\mathbf{u}^{\mathcal{F}} - \Delta\mathbf{u}^{\mathcal{F}} + \nabla\pi= -\operatorname{div}\left((\nabla\mathbf{d})^{\mathsf{T}}\nabla\mathbf{d}\right), & \text{in } (0,T) \times\mathcal{F}(t),\\ \operatorname{div}\mathbf{u}^{\mathcal{F}} = 0, & \text{in } (0,T) \times\mathcal{F}(t),\\ \partial_{t}\mathbf{d} + (\mathbf{u}^{\mathcal{F}} \cdot\nabla)\mathbf{d} - \Delta\mathbf{d} = \lvert\nabla\mathbf{d}\rvert^{2}\mathbf{d}, & \text{in } (0,T) \times\mathcal{F}(t),\\ \lvert\mathbf{d}\rvert= 1, & \text{in } (0,T) \times\mathcal{F}(t). \tag*{(3)} \end{cases}

For ∣d∣=1\lvert\mathbf{d}\rvert= 1, the scalar ∣∇d∣2\lvert\nabla\mathbf{d}\rvert^{2} is the Lagrange multiplier associated with the unit-length constraint in (3)3_3, and −div⁡((∇d)T∇d)-\operatorname{div}\left((\nabla\mathbf{d})^{\mathsf{T}}\nabla\mathbf{d}\right) in (3)1_1 is the Ericksen elastic force. The isotropic part of the elastic stress has been absorbed into the pressure.

Stress tensor

To formulate the fluid–structure coupling through Newton’s laws, we introduce the relevant stress tensors. Let D(uF)=12(∇uF+(∇uF)T)\mathbb{D}(\mathbf{u}^{\mathcal{F}}) = \frac{1}{2}\left(\nabla\mathbf{u}^{\mathcal{F}} + (\nabla\mathbf{u}^{\mathcal{F}})^{\mathsf{T}}\right) denote the symmetric part of the gradient. The Newtonian stress tensor is given by

TN(uF,π)=2D(uF)−πI3,\mathbb{T}_{\mathrm{N}}(\mathbf{u}^{\mathcal{F}},\pi) = 2\mathbb{D}(\mathbf{u}^{\mathcal{F}}) - \pi\mathbb{I}_{3},

where I3\mathbb{I}_{3} denotes the 3×33 \times3 identity matrix. The Ericksen elastic stress is

TE(d)=−(∇d)T∇d.\mathbb{T}_{\mathrm{E}}(\mathbf{d}) = -(\nabla\mathbf{d})^{\mathsf{T}}\nabla\mathbf{d}.

The total Cauchy stress is

T(uF,π,d):=TN(uF,π)+TE(d)=2D(uF)−πI3−(∇d)T∇d.(4)\mathbb{T}(\mathbf{u}^{\mathcal{F}},\pi,\mathbf{d}) := \mathbb{T}_{\mathrm{N}}(\mathbf{u}^{\mathcal{F}},\pi) + \mathbb{T}_{\mathrm{E}}(\mathbf{d}) = 2\mathbb{D}(\mathbf{u}^{\mathcal{F}}) - \pi\mathbb{I}_{3} - (\nabla\mathbf{d})^{\mathsf{T}}\nabla\mathbf{d}. \tag*{(4)}

Rigid body dynamics

With unit solid density, the mass and center of mass are

References

  1. [1]Helmut Abels, Georg Dolzmann, and YuNing Liu. Well-posedness of a fully coupled Navier–Stokes/Q-tensor system with inhomogeneous boundary data. SIAM J. Math. Anal., 46(4):3050–3077, 2014.arxiv.org/abs/1311.3443
  2. [2]John M. Ball. Liquid crystals and their defects. In Mathematical thermodynamics of complex fluids, volume 2200 of Lecture Notes in Math., pages 1–46. Springer, Cham, 2017.arxiv.org/abs/1706.06861
  3. [3]Antony N. Beris and Brian J. Edwards. Thermodynamics of flowing systems with internal microstructure, volume 36 of Oxford Engineering Science Series. The Clarendon Press, Oxford University Press, New York, 1994. Oxford Science Publications.DOI
  4. [4]Tim Binz, Felix Brandt, Matthias Hieber, and Arnab Roy. Interaction of liquid crystals with a rigid body. Trans. Amer. Math. Soc., 377(11):8049–8090, 2024.DOI
  5. [5]M. E. Bogovskiĭ. Solution of the first boundary value problem for an equation of continuity of an incompressible medium. Dokl. Akad. Nauk SSSR, 248(5):1037–1040, 1979.
  6. [6]Felix Brandt, Matthias Hieber, and Arnab Roy. Dynamics of the General Q-Tensor Model Interacting with a Rigid Body. SIAM J. Math. Anal., 58(1):372–410, 2026.arxiv.org/abs/2501.01181
  7. [7]Marco Bravin, Eduard Feireisl, Arnab Roy, and Arghir Zarnescu. On the long-time behaviour of a system of several rigid bodies immersed in a viscous fluid. Proc. Amer. Math. Soc., 154(11):4823–4834, 2026.arxiv.org/abs/2505.04372
  8. [8]Marco Bravin and Šárka Nečasová. On the trajectory of a light small rigid body in an incompressible viscous fluid. J. Nonlinear Sci., 34:Paper No. 42, 2024.arxiv.org/abs/2211.15610
  9. [9]Gregory A. Chechkin, Tudor S. Ratiu, Maxim S. Romanov, and Vyacheslav N. Samokhin. Existence and uniqueness theorems for the full three-dimensional Ericksen–Leslie system. Math. Models Methods Appl. Sci., 27(5):807–843, 2017.DOI
  10. [10]Carlos Conca, Jorge San Martín H., and Marius Tucsnak. Existence of solutions for the equations modelling the motion of a rigid body in a viscous fluid. Comm. Partial Differential Equations, 25(5-6):1019–1042, 2000.
  11. [11]P. G. de Gennes and J. Prost. The Physics of Liquid Crystals, volume 83 of International Series of Monographs on Physics. Clarendon Press, Oxford, 1993. Second edition.
  12. [12]B. Desjardins and M. J. Esteban. Existence of weak solutions for the motion of rigid bodies in a viscous fluid. Arch. Ration. Mech. Anal., 146(1):59–71, 1999.DOI
  13. [13]B. Desjardins and M. J. Esteban. On weak solutions for fluid-rigid structure interaction: compressible and incompressible models. Comm. Partial Differential Equations, 25(7-8):1399–1413, 2000.DOI
  14. [14]J. L. Ericksen. Hydrostatic theory of liquid crystals. Arch. Rational Mech. Anal. 9:371–378, 1962.DOI
  15. [15]Sylvain Ervedoza, Debayan Maity, and Marius Tucsnak. Large time behaviour for the motion of a solid in a viscous incompressible fluid. Math. Ann., 385(1-2):631–691, 2023.
  16. [16]Eduard Feireisl. On the motion of rigid bodies in a viscous incompressible fluid. J. Evol. Equ., 3(3):419–441, 2003. Dedicated to Philippe Bénilan.
  17. [17]Eduard Feireisl, Matthieu Hillairet, and Šárka Nečasová. On the motion of several rigid bodies in an incompressible non-Newtonian fluid. Nonlinearity, 21(6):1349–1366, 2008.DOI
  18. [18]Eduard Feireisl, Elisabetta Rocca, Giulio Schimperna, and Arghir Zarnescu. Evolution of non-isothermal Landau-de Gennes nematic liquid crystals flows with singular potential. Commun. Math. Sci., 12(2):317–343, 2014.arxiv.org/abs/1207.1643
  19. [19]Eduard Feireisl, Arnab Roy, and Arghir Zarnescu. On the motion of a large number of small rigid bodies in a viscous incompressible fluid. J. Math. Pures Appl. (9), 175:216–236, 2023.arxiv.org/abs/2209.09284
  20. [20]Zhewen Feng, Min-Chun Hong, and Yu Mei. Convergence of the Ginzburg–Landau approximation for the Ericksen–Leslie system. SIAM J. Math. Anal., 52(1):481–523, 2020.DOI
  21. [21]Giovanni P. Galdi. An introduction to the mathematical theory of the Navier-Stokes equations. Vol. I, volume 38 of Springer Tracts in Natural Philosophy. Springer-Verlag, New York, 1994. Linearized steady problems.
  22. [22]Matthias Geißert, Karoline Götze, and Matthias Hieber. Lᵖ-theory for strong solutions to fluid-rigid body interaction in Newtonian and generalized Newtonian fluids. Trans. Amer. Math. Soc., 365(3):1393–1439, 2013.DOI
  23. [23]Matthias Geißert, Horst Heck, and Matthias Hieber. On the equation div u = g and Bogovskiĭ’s operator in Sobolev spaces of negative order. In Partial differential equations and functional analysis, volume 168 of Operator Theory Adv. Appl., pages 113–121. Birkhäuser, Basel, 2006.
  24. [24]Zhiyuan Geng, Arnab Roy, and Arghir Zarnescu. Global existence of weak solutions for a model of nematic liquid crystal-colloidal interactions. SIAM J. Math. Anal., 56(4):4324–4355, 2024.arxiv.org/abs/2310.16245
  25. [25]David Gérard-Varet and Matthieu Hillairet. Existence of weak solutions up to collision for viscous fluid–solid systems with slip. Comm. Pure Appl. Math., 67(12):2022–2076, 2014.
  26. [26]David Gérard-Varet, Matthieu Hillairet, and Chao Wang. The influence of boundary conditions on the contact problem in a 3d navier–stokes flow. J. Math. Pures Appl., 103(1):1–38, 2015.
  27. [27]Max D. Gunzburger, Hyung-Chun Lee, and Gregory A. Seregin. Global existence of weak solutions for viscous incompressible flows around a moving rigid body in three dimensions. J. Math. Fluid Mech., 2(3):219–266, 2000.DOI
  28. [28]Jiao He and Pei Su. The vanishing limit of a rigid body in three-dimensional viscous incompressible fluid. Math. Ann., 391:5341–5373, 2025.arxiv.org/abs/2211.16257
  29. [29]Matthias Hieber, Amru Hussein, and Marc Wrona. Strong Well-Posedness of the Q-Tensor Model for Liquid Crystals: The Case of Arbitrary Ratio of Tumbling and Aligning Effects §. Arch. Ration. Mech. Anal., 248(3):Paper No. 40, 2024.
  30. [30]Matthias Hieber, Jinkai Li, and Mathias Wilke. Nematic liquid crystals: Ericksen-Leslie theory with general stress tensors. Arch. Ration. Mech. Anal., 249(6):Paper No. 76, 45, 2025.DOI
  31. [31]Matthias Hieber, Manuel Nensohn, Jan Prüss, and Katharina Schade. Dynamics of nematic liquid crystal flows: the quasilinear approach. Ann. Inst. H. Poincaré C Anal. Non Linéaire, 33(2):397–408, 2016.
  32. [32]Matthieu Hillairet and Takéo Takahashi. Collisions in three-dimensional fluid structure interaction problems. SIAM J. Math. Anal., 40(6):2451–2477, 2009.DOI
  33. [33]Matthieu Hillairet and Takéo Takahashi. Blow up and grazing collision in viscous fluid solid interaction systems. Ann. Inst. H. Poincaré C Anal. Non Linéaire, 27(1):291–313, 2010.
  34. [34]Tao Huang, Fanghua Lin, Chun Liu, and Changyou Wang. Finite time singularity of the nematic liquid crystal flow in dimension three. Arch. Ration. Mech. Anal., 221(3):1223–1254, 2016.DOI
  35. [35]Joshua Kortum and Changyou Wang. Existence and compactness of global weak solutions of three-dimensional axisymmetric ericksen–leslie system. SIAM J. Math. Anal., 57(6):6660–6684, 2025.arxiv.org/abs/2403.18559
  36. [36]F. M. Leslie. Some constitutive equations for liquid crystals. Arch. Ration. Mech. Anal., 28(4):265–283, 1968.
  37. [37]Fang-Hua Lin. Nonlinear theory of defects in nematic liquid crystals; phase transition and flow phenomena. Comm. Pure Appl. Math., 42(6):789–814, 1989.DOI
  38. [38]Fang-Hua Lin and Chun Liu. Nonparabolic dissipative systems modeling the flow of liquid crystals. Comm. Pure Appl. Math., 48(5):501–537, 1995.DOI
  39. [39]Fanghua Lin and Changyou Wang. Global existence of weak solutions of the nematic liquid crystal flow in dimension three. Comm. Pure Appl. Math., 69(8):1532–1571, 2016.DOI
  40. [40]Prince Romeo Mensah. The simplified 2D Ericksen–Leslie liquid crystal model interacting with a 1D flexible shell. arXiv:2605.06463, 2026.arxiv.org/abs/2605.06463
  41. [41]Boris Muha, Šárka Nečasová, and Ana Radošević. On the regularity of weak solutions to the fluid–rigid body interaction problem. Math. Ann., 389:1007–1052, 2024.arxiv.org/abs/2211.03080
  42. [42]Miho Murata and Yoshihiro Shibata. Global well posedness for a Q-tensor model of nematic liquid crystals. J. Math. Fluid Mech., 24(2):Paper No. 34, 30, 2022.DOI
  43. [43]Marius Paicu and Arghir Zarnescu. Global existence and regularity for the full coupled Navier-Stokes and Q-tensor system. SIAM J. Math. Anal., 43(5):2009–2049, 2011.arxiv.org/abs/1004.2192
  44. [44]Marius Paicu and Arghir Zarnescu. Energy dissipation and regularity for a coupled Navier-Stokes and Q-tensor system. Arch. Ration. Mech. Anal., 203(1):45–67, 2012.
  45. [45]Jorge Alonso San Martín, Victor Starovoitov, and Marius Tucsnak. Global weak solutions for the two-dimensional motion of several rigid bodies in an incompressible viscous fluid. Arch. Ration. Mech. Anal., 161(2):113–147, 2002.DOI
  46. [46]Wei Wang, Lei Zhang, and Pingwen Zhang. Modelling and computation of liquid crystals. Acta Numer., 30:765–851, 2021.
  47. [47]Mark Wilkinson. Strictly physical global weak solutions of a Navier-Stokes Q-tensor system with singular potential. Arch. Ration. Mech. Anal., 218(1):487–526, 2015.DOI
  48. [48]Hao Wu, Xiang Xu, and Chun Liu. On the general Ericksen-Leslie system: Parodi’s relation, well-posedness and stability. Arch. Ration. Mech. Anal., 208(1):59–107, 2013.DOI
  49. [49]Zhongbao Zuo. ε-regularity criteria and the number of singular points for the 3d simplified ericksen–leslie system. Math. Nachr., 297(12):4370–4388, 2024.DOI

Paper details

vlnc:W_jn5tyhhx
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY-SA 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Mathematics

Not recorded for this paper

View statement
Looking for related papers…
Contents