betaFeedback

WorksPhysics and Astronomy

Gravitational form factors of the proton from near-threshold vector meson photoproduction

Abstract

We embark on a systematical analysis of the quark and gluon gravitational form factors (GFFs) of the proton, by connecting energy-momentum tensor (EMT) and the near-threshold vector meson photoproduction (NTVMP). Concretely, the quark contributions of GFFs are determined by global fitting the cross section of the lightest vector meson ρ0ρ^0 photoproduction. Combined with the gluon GFFs achieved from heavy quarkonium J/ψJ/ψ photoproduction data, the complete GFFs are obtained and compared with the experimental results and Lattice QCD determinations. In addition, we use the Resonances Via Padé (RVP) method based on the Schlessinger Point Method (SPM) to obtain a model-independent quark DD-term distribution by direct analytical continuation of Deep Virtual Compton Scattering (DVCS) experimental data. If errors are considered, the results obtained by RVP are basically consistent with those obtained by NTVMP. Moreover, the comprehensive information on GFFs helps us to uncover the mass distribution and mechanical properties inside the proton. This work is not only an important basis for delving the proton enigmatic properties, unraveling the secrets of the proton internal nature but also have significance theoretical guiding for future JLab and EICs experimental measurements.

Introduction

The structure of hadrons, the bound states of strong interactions, is conveniently probed by exploring the other fundamental forces: electromagnetic, weak, and gravitational interactions. For the proton’s overall properties, both electromagnetic and weak form factors can be well determined, while our understanding on gravitational form factors (GFFs) is inadequate. As the gravity couples to matter via the energy-momentum tensor (EMT), the distributions of energy, angular momentum, and various mechanical properties can be obtained from the matrix elements of EMT [1, 2]. These properties are encoded in the GFFs. Concretely, the GFFs provide critical information about the fundamental properties: mass MM, spin JJ, and the Druck term (DD term), and offer direct access to the proton’s internal structure [3, 4, 5]. The sum GFFs, which are divided into quark and gluon contributions, are measurable quantities defined purely for the total system, providing information on the quantum origin of mass and the internal dynamics of the proton.

The mass and pressure distributions in the proton are constructed from the AA-term and DD-term GFFs. However, besides the precise measurement of the proton mass and quark DD-term extracted from deeply virtual Compton scattering (DVCS) experiment [6], the complete information on the proton GFFs is very meager. Recently, one study obtained the DD-term under the assumptions of the quark and gluon DD-term is the same, as there is no information on the gluon DD-term from experiment [6]. On the other hand, the quark and gluon contributions to DD-term have been researched using lattice quantum chromodynamics (LQCD) [7, 8, 9, 10], enhancing our understanding of the proton GFFs. To date, the exact value of DD-term, which varies with the squared momentum transfer tt, remains a subject of ongoing research.

To address this problem, the near-threshold vector meson photoproduction (NTVMP) process should be considered as a indispensable way. This is because in the indirect measurement of GFFs in exclusive processes, besides DVCS, γγ∗\gamma\gamma^{*} reaction, time-like Compton scattering and double DVCS [11], the vector meson production experiment are regarded as an advantageous part and abundant experiment data have been collected by comparison. Actually, the proton internal nature can be explored by using a photon as a probe in the γp→Vp\gamma p\to Vp process, with the same vector quantum numbers as a photon and the vector meson which is JPC=1−−J^{PC}=1^{--}, such as the proton mass radius [5, 12, 13], the trace anomaly contribution to the proton mass [14, 15, 16, 17], as well as the quarkonium–proton scattering length [18, 19, 20, 21, 22]. Moreover, the near-threshold heavy quarkonium photoproduction offers a superior path to access the gluon GFFs [5, 23, 24, 25, 26, 27, 28, 29, 30]. One mainly reason is that the scalar gluon operator is dominant in the production amplitude of heavy quarkonium (such as J/ψJ/\psi), and sensitive to the gluonic structure of the proton [5]. Actually, the light vector meson (such as ρ0\rho^{0}) photoproduction mainly reflects the quark part of the GFFs [13], since the exchange of a scalar quark-antiquark pair is not suppressed and far exceeds the contribution of scalar gluon exchange [13, 31]. To date, the systematic researches of proton GFFs is very scarce and challenging. The separate quark and gluon EMT operators are not conserved, for the additional form factors appear in the decompositions of their matrix elements. Moreover, the individual quark and gluon GFFs studies acquire scale- and scheme-dependence. Therefore, we find it promising to obtain the complete information proton GFFs from the light and heavy NTVMP process, which is essential for us to extract the related properties inside the proton.

Even though the DVCS experiments is almost insensitive to gluon DD-term, the future experiments is crucial to gain insight into the proton’s remaining GFFs, for instance, Jefferson Lab (JLab) [32], Electron-Ion Colliders (EICs) [33, 34, 35]. And this work will set important benchmarks for revealing the internal character inside the proton in future experiments at JLab and EICs.

The internal nature of the proton

The expression of the GFFs is analogous to the electric charge distribution which can be mapped out by means of electron scattering experiments [36]. In a similar way, scattering off gravitons would allow one to access information on the spatial distribution of the energy inside a proton. The physical content of the information encoded in the EMT form factors is revealed in the so-called Breit frame [4]. Here, the (00) component of the EMT donate the isotropous energy density inside the proton, which can be expressed as [4]

T00(r)=∫d3Δ(2π)3e−irΔG(t)(1)T_{00}(r) = \int\frac{d^{3}\Delta}{(2\pi)^{3}} e^{-i\mathbf{r}\Delta} G(t) \tag*{(1)}

where t=−Δ2t=-\Delta^{2} is the squared momentum transfer, the gravitational form factors G(t)G(t) can be written as [4, 16, 23]

G(t)=MA(t)−t4M(A(t)−2J(t)+D(t))(2)G(t) = MA(t) - \frac{t}{4M}\left(A(t)-2J(t)+D(t)\right) \tag*{(2)}

where MM is the proton mass. The form factors A(t)A(t), J(t)J(t) and D(t)D(t) can derive the proton mass distribution, angular momentum distribution and mechanical properties, respectively. Here A(0)=1A(0)=1, J(0)=12J(0)=\frac{1}{2}, and the form factor B(t)=2J(t)−A(t)B(t)=2J(t)-A(t) is consistent with zero basically [8, 27, 37]. The proton GFFs are the sum contributions of the quark and gluon GFFs, which are given as [4]

Gq/g(t)=MAq/g(t)−t4M(−Bq/g(t)+Dq/g(t))+MCˉq/g(t)(3)G_{q/g}(t) = MA_{q/g}(t)-\frac{t}{4M}\left(-B_{q/g}(t)+D_{q/g}(t)\right)+M\bar{C}_{q/g}(t) \tag*{(3)}

here the Cˉg(t)\bar{C}_{g}(t) form factor can be written as [23, 38]

Cˉg(t)=−Ag(t)4+−t16M2(Bg(t)−3Dg(t))\bar{C}_{g}(t)=-\frac{A_{g}(t)}{4}+\frac{-t}{16M^{2}}\left(B_{g}(t)-3D_{g}(t)\right)

the Cˉ\bar{C}-GFFs satisfies the constraint Cˉq(t)+Cˉg(t)=0\bar{C}_{q}(t)+\bar{C}_{g}(t)=0 due to EMT conservation [4]. As the contribution of the Bg(t)+Dg(t)B_{g}(t)+D_{g}(t) is negligible [23, 38, 39, 40], the component of the gluon GFFs part become [23]

Gg(t)=34MAg(t)−t4MDg(t)+3t16M(Bg(t)+Dg(t))≈34MAg(t)−t4MDg(t)(4)\begin{aligned} G_{g}(t) &= \frac{3}{4}MA_{g}(t)-\frac{t}{4M}D_{g}(t)+\frac{3t}{16M}\left(B_{g}(t)+D_{g}(t)\right)\\ &\approx\frac{3}{4}MA_{g}(t)-\frac{t}{4M}D_{g}(t) \tag*{(4)} \end{aligned}

The quark GFFs are obtained as follows

Gq(t)=MAq(t)−t4M(−Bq(t)+Dq(t))−MCˉg(t)≈MAq(t)+14MAg(t)−t4MDq(t)−3t16M(Bg(t)+Dg(t))≈MAq(t)+14MAg(t)−t4MDq(t)(5)\begin{aligned} G_{q}(t) &=MA_{q}(t)-\frac{t}{4M}\left(-B_{q}(t)+D_{q}(t)\right)-M\bar{C}_{g}(t)\\ &\approx MA_{q}(t)+\frac{1}{4}MA_{g}(t)-\frac{t}{4M}D_{q}(t)-\frac{3t}{16M}\left(B_{g}(t)+D_{g}(t)\right)\\ &\approx MA_{q}(t)+\frac{1}{4}MA_{g}(t)-\frac{t}{4M}D_{q}(t) \tag*{(5)} \end{aligned}

as the form factor B(t)=Bq(t)+Bg(t)≈0B(t)=B_{q}(t)+B_{g}(t)\approx0.

For AA-GFFs, the mass distribution of the proton are encoded in the AA-term, which can be expressed under the dipole form parametrization as

A(t)=Aq(0)(1−t/mq2)2+Ag(0)(1−t/mg2)2(6)A(t)=\frac{A_{q}(0)}{\left(1-t/m_{q}^{2}\right)^{2}}+\frac{A_{g}(0)}{\left(1-t/m_{g}^{2}\right)^{2}} \tag*{(6)}

where the constraint Aq(0)+Ag(0)=1A_{q}(0)+A_{g}(0)=1 is the consequence of momentum conservation [4, 41]. mqm_{q} and mgm_{g} are free parameters. The gluon contribution Ag(0)=0.414A_{g}(0)=0.414 was obtained from global QCD analysis [42], and agrees with other LQCD results [9, 43, 44]. In this work, to mirror the mass distribution inside the proton, a mean square radius of the mass distribution (AA-term mass radius) is defined as

⟨RA-term2⟩=∫d3r r2A(r)∫d3r A(r)=12(Aq(0)mq2+Ag(0)mg2)(7)\left\langle R_{A\text{-term}}^{2}\right\rangle=\frac{\int d^{3}r\,r^{2}A(r)}{\int d^{3}r\,A(r)}=12\left(\frac{A_{q}(0)}{m_{q}^{2}}+\frac{A_{g}(0)}{m_{g}^{2}}\right) \tag*{(7)}

where A(r)=∫d3Δ(2π)3e−irΔA(t)A(r)=\int\frac{d^{3}\Delta}{(2\pi)^{3}}e^{-i\mathbf{r}\Delta}A(t). In previous work [5], the expression G(t)G(t) in Eq. (2) is considerd as a mass distribution when ∣t∣|t| is enough small as G(t)≈MA(t)G(t)\approx MA(t). Through the extraction of the form factor from the J/ψJ/\psi photoproduction at small ∣t∣|t| [5, 12, 28], the result of considering gluon contribution can derive the gluon radius of the proton; while the radius derived from the ρ0\rho^{0} differential cross section can be regarded as the quark contribution without the gluon part [13]. Actually, A(t)=Aq(t)+Ag(t)A(t)=A_{q}(t)+A_{g}(t) denote the sum contribution inside the proton, which allow us to define the proton mass radius from AA-term as Eq. (7).

The DD-term in GFFs is an area of significant interest, and can define pressure and shear forces distributions inside the proton. The DD-term is typically parameterized in the tripole form as [7, 45, 46]

D(t)=Dq(0)(1−t/dq2)3+Dg(0)(1−t/dg2)3(8)D(t)=\frac{D_{q}(0)}{\left(1-t/d_{q}^{2}\right)^{3}}+\frac{D_{g}(0)}{\left(1-t/d_{g}^{2}\right)^{3}} \tag*{(8)}

where Dq(0),dqD_{q}(0),d_{q} and Dg(0),dgD_{g}(0),d_{g} correspond to the quark and gluon parameters, respectively.

As the gravity couples to matter via the EMT, the proton GFFs offers direct access to the proton’s mechanical structure from the matrix elements of EMT [1, 2]. Concretely, the pressure p(r)p(r) and shear forces s(r)s(r) are “good observables” to report the pressure and shear forces distributions inside the proton, which can be expressed as [3, 4]

s(r)=−12rddr1rddrD~(r),p(r)=13r2ddrr2ddrD~(r)(9)s(r)=-\frac{1}{2}r\frac{d}{dr}\frac{1}{r}\frac{d}{dr}\widetilde{D}(r),\qquad p(r)=\frac{1}{3r^{2}}\frac{d}{dr}r^{2}\frac{d}{dr}\widetilde{D}(r) \tag*{(9)}

here D~(r)\widetilde{D}(r) is the Fourier transform of D(t)D(t) as [3, 4]

D~(r)=∫d3Δ2M(2π)3e−irΔ(Dg(−Δ2)+Dq(−Δ2))(10)\widetilde{D}(r)=\int\frac{d^{3}\Delta}{2M(2\pi)^{3}}e^{-i\mathbf{r}\Delta}\left(D_{g}(-\Delta^{2})+D_{q}(-\Delta^{2})\right) \tag*{(10)}

The positive combination Fn(r)=23s(r)+p(r)F_{n}(r)=\frac{2}{3}s(r)+p(r) has the meaning of the normal force distribution in the composed particle system [4]. One can define the proton mechanical radius

@page 2/9 starts_mid=1 ends_mid=1 ... in term of the meaning of the normal forces distribution in the system, which can be described as [4]

⟨Rmech2⟩=∫d3r r2[Fnq+g(r)]∫d3r[Fnq+g(r)]=12(Dq(0)dq+Dg(0)dg)Dq(0)dq+Dg(0)dg(11)\langle R_{\mathrm{mech}}^{2}\rangle= \frac{\int d^{3}r\,r^{2}\left[F_{n}^{q+g}(r)\right]}{\int d^{3}r\left[F_{n}^{q+g}(r)\right]} = \frac{12\left(\frac{D_{q}(0)}{d_{q}}+\frac{D_{g}(0)}{d_{g}}\right)}{D_{q}(0)d_{q}+D_{g}(0)d_{g}} \tag*{(11)}

The energy density T00(r)T_{00}(r) in Eq. (1) can only be defined for the total system, which can be written as [4]

T00(r)=∫d3Δ(2π)3e−irΔ(Gq(t)+Gg(t))=∑a=q,g16M2Aa(0)ma3e−mar−(−3+dar)Da(0)da5e−dar128πM(12)\begin{aligned} T_{00}(r)=\int\frac{d^{3}\Delta}{(2\pi)^{3}}e^{-ir\Delta}\left(G_{q}(t)+G_{g}(t)\right) \\ &=\sum_{a=q,g}\frac{16M^{2}A_{a}(0)m_{a}^{3}e^{-m_{a}r}-(-3+d_{a}r)D_{a}(0)d_{a}^{5}e^{-d_{a}r}}{128\pi M} \tag*{(12)} \end{aligned}

Moreover, the energy density satisfies T00(r)>0T_{00}(r)>0 in a mechanical system, this allows us to introduce the mean square radius of the energy density (energy radius) as [4]

⟨RE2⟩=∫d3r r2T00(r)∫d3rT00(r)=⟨RA−term2⟩−3(Dq(0)+Dg(0))2M2(13)\langle R_{E}^{2}\rangle=\frac{\int d^{3}r\,r^{2}T_{00}(r)}{\int d^{3}rT_{00}(r)}=\left\langle R_{A-\mathrm{term}}^{2}\right\rangle-\frac{3\left(D_{q}(0)+D_{g}(0)\right)}{2M^{2}} \tag*{(13)}

The proton energy radius can be associated with the slope of A(t)A(t) in Eq. (7) and the D-term GFFs, while covering the proton A-term mass radius.

The GFFS AND VECTOR MESON PHOTOPRODUCTION

Next, we demonstrate the complete analysis of the gluon and quark GFFs from the near-threshold heavy quarkonium and light vector meson photoproduction, respectively. For gluon GFFs, a recent work achieve great success [28], with the help of the pure nature of J/ψJ/\psi photoproduction, where the quark exchange is strongly suppressed by the Okubo-Zweig-Izuki (OZI) rule. Thus the heavy quarkonium photoproduction is a promising path to access the gluon GFFs due to the gluon exchange dominant (Figure 1(a)). On the other hand, the quark GFFs can be naturally associated with the ρ0\rho^{0} photoproduction, as the exchange between the proton and the meson states are occupied by valence quarks (Figure 1(b)), and the gluon exchange is quite meager when ∣t∣|t| is small [13, 31, 47].

Image not extracted

Figure 1. The Feynman diagrams for J/ψJ/\psi production (Figure 1(a)) and ρ0\rho^{0} production (Figure 1(b)) in the γp→V(ρ0,J/ψ)p\gamma p\to V(\rho^{0},J/\psi)p reaction.

Typically, the photoproduction cross section of the vector meson is given by [48]

dσγp→Vpdt=164πW21∣pγ∣∣Mγp→Vp∣2(14)\frac{d\sigma_{\gamma p\to Vp}}{dt}=\frac{1}{64\pi W^{2}}\frac{1}{|\mathbf{p}_{\gamma}|}\left|\mathcal{M}_{\gamma p\to Vp}\right|^{2} \tag*{(14)}

where pγ\mathbf{p}_{\gamma} and WW are the center of mass (c.m.) photon momentum and c.m. energy in the γp→Vp\gamma p\to Vp process, respectively. As an assumption, the amplitude of light and heavy quarkonium primarily attributes to the quark and gluon part of the EMT of QCD in this work, respectively, which can be written as [5]

Mγp→Vp=−Qec22Mg2q(g)⟨P′∣T00q(g)∣P⟩(15)\mathcal{M}_{\gamma p\to Vp}=-Q_{e}c_{2}2Mg_{2}^{q(g)}\langle P'|T_{00}^{q(g)}|P\rangle \tag*{(15)}

where QeQ_{e} represents the coupling of the photon to the electric charge of the quarks in vector meson. c2c_{2} is the short-distance coefficient, and g2=4g^{2}=4 is the QCD coupling with αs≈0.32\alpha_{s}\approx0.32 [30]. Combining Eqs. (4) and (5), the component of the quark and gluon part EMT form factors become

⟨P′∣T00g∣P⟩=uˉ(P′)u(P)(34MAg(t)−t4MDg(t))\langle P'|T_{00}^{g}|P\rangle=\bar{u}(P')u(P)\left(\frac{3}{4}MA_{g}(t)-\frac{t}{4M}D_{g}(t)\right)
⟨P′∣T00q∣P⟩=uˉ(P′)u(P)(MAq(t)+14MAg(t)−t4MDq(t))(16)\langle P'|T_{00}^{q}|P\rangle=\bar{u}(P')u(P)\left(MA_{q}(t)+\frac{1}{4}MA_{g}(t)-\frac{t}{4M}D_{q}(t)\right) \tag*{(16)}

where the spinor normalization uˉ(P′)u(P)=2M\bar{u}(P')u(P)=2M. By integrating the differential cross section (Eq. (14)) over the allowed kinematical range from tmin⁡t_{\min} to tmax⁡t_{\max}, the total cross section are computed and can be expressed as

σ=∫tmin⁡tmax⁡dt(dσdt)(17)\sigma=\int_{t_{\min}}^{t_{\max}}dt\left(\frac{d\sigma}{dt}\right) \tag*{(17)}

It has been determined that the form factor Gq/g(t)G_{q/g}(t) in Eqs. (4) and (5) satisfy

Gq(0)=MAq(0)+14MAg(0)andGg(0)=34MAg(0)(18)G_{q}(0)=MA_{q}(0)+\frac{1}{4}MA_{g}(0)\quad\text{and}\quad G_{g}(0)=\frac{3}{4}MA_{g}(0) \tag*{(18)}

whereby, the coefficient c2c_{2} in Eq. (15) can be determined by extrapolating the near-threshold differential cross section at t=0t=0. So far, we have established the relationship between the complete GFFs and the NTVMP, including the differential and total cross section in Eqs. (14) and (17).

As discussed in Ref. [23], the parameters mgm_{g}, Dg(0)D_{g}(0) and dgd_{g} in gluon GFFs are attained by global fitting the near-threshold J/ψJ/\psi photoproduction data, including the differential and total cross section [28, 49, 50, 51, 52, 53]. The quark GFFs calculation are resemblance to the gluon GFFs (as described in Ref. [23]). We consider the squared momentum transfer tt of the differential cross section to be in the range of ∣t∣<1 GeV2|t|<1\ \mathrm{GeV}^{2}. A meticulously global fitting of the ρ0\rho^{0} photoproduction experimental data is employed [54], to extract the parameters mqm_{q}, Dq(0)D_{q}(0) and dqd_{q} in quark GFFs (Eqs. (14)). These obtained parameters as presented in Table 1. The comparison between the differential cross section of ρ0\rho^{0} photoproduction and the experimental measurements is manifested in Figure 2, exhibiting a good agreement. To check the accuracy of the differential cross sections fitting, we compare these integrals vulue through Eq. (17) with the total cross section experimental data [54], as depicted in Figure 3. Our result demonstrates agreement with the value and trend of experimental data, which has proven the reliable fitting.

mqm_q (GeV)Dq(0)D_q(0)dqd_q (GeV)
quark GFFs (this work)0.85±0.050.85 \pm0.05−1.76±0.30-1.76 \pm0.300.88±0.050.88 \pm0.05
gluon GFFs [23]mgm_g (GeV)Dg(0)D_g(0)dgd_g (GeV)
1.43±0.101.43 \pm0.10−2.08±0.25-2.08 \pm0.250.90±0.070.90 \pm0.07

Table 1. Top: obtained values of the parameters mqm_q, Dq(0)D_q(0) and dqd_q in quark GFFs by a global fitting of the ρ0\rho^0 differential cross section experimental data [54]. Bottom: the parameters mgm_g, Dg(0)D_g(0) and dgd_g in gluon GFFs achieved from global fitting the J/ψJ/\psi photoproduction data [28, 49, 50, 51, 52, 53].

Image not extracted

Figure 2. Global fitting result of γp→ρ0p\gamma p \to\rho^0 p differential cross section as a function of −t-t at c.m. energy 1.92 GeV, 2.02 GeV, 2.11 GeV, 2.20 GeV, 2.28 GeV, and 2.36 GeV. The blue bands reflect the statistical error of mqm_q, Dq(0)D_q(0) and dqd_q. Reference of data can be found in [54].

Image not extracted

Figure 3. The total cross sections calculated by integrating the functions fitted to the differential cross sections for the six beam energy regions, with the statistical uncertainties of mqm_q, Dq(0)D_q(0) and dqd_q shown, and compared with the experimental results (black squares) [54].

As shown in Figure 4, the value of quark and gluon A-term and D-term are compared with the DVCS experiment data and LQCD determinations [10]. Here the errors of parameters include all uncertainties of the GFFs. For quark GFFs, the quark D-term exhibits a notable agreement with the DVCS experiment data and LQCD determinations, while our statement on A-term is approximately half smaller than the LQCD results [10]. The converse gluon A- and D-term are displayed in Figure 4, to avoid the overlapping of the data points. Notably, the gluon D-term contributes to more than the quark D-term lightly, and our statement obtained for gluon A and D-term are approximately comparable with the LQCD results [10]. The total GFFs are shown in Figure 5, compared with the LQCD results [10]. For the D(t)D(t), our results are found to be consistent with LQCD result, while both A(t)A(t), J(t)J(t) is a slightly small. The deviation of A(t)A(t) can be attributed to the absence of ss quark contribution in our calculations, then the J(t)=12A(t)J(t) = \frac{1}{2}A(t) can be derived. Therefore, further follow-up sufficient work is still necessary.

Image not extracted

Figure 4. Top panel: The Aq(t)A_q(t) (red solid curve) and converse Ag(t)A_g(t) (green dash-dotted curve) compared with LQCD results [10]. Bottom panel: The Dq(t)D_q(t) (red dotted curve) and converse Dg(t)D_g(t) (green dashed curve) compared with LQCD results [10] and the result extracted from DVCS experiments [6].

Image not extracted

Figure 5. The three GFFs of the proton, including A(t)A(t), J(t)J(t), and D(t)D(t), as a function of tt, are compared with LQCD results [10].

The proton A-term mass radius, mechanical radius and energy radius in Eq. (7), (11) and (13) are computed, as listed in Table II. Two important mechanical quantity, the pressure and energy density in the center proton, are also revealed. Astonishingly, the obtained proton A-term mass radius is a notable achievement that the corresponding ratio of the radius derived from mass and electromagnetic form factor is 0.82±0.050.82 \pm0.05, which approach to the π\pi meson’s determination 0.79(3)0.79(3) [55]. It turns out that the ratio of the mass radius and charge radius of different hadrons seems to be consistent.

AA-term mass radius (fm)mechanical radius (fm)energy radius (fm)
0.69±0.040.69 \pm0.040.77±0.050.77 \pm0.050.85±0.060.85 \pm0.06
p(0)p(0) (GeV/fm3^3)T00(0)T_{00}(0) (GeV/fm3^3)—
1.49−0.60+0.871.49^{+0.87}_{-0.60}5.40−2.76+2.545.40^{+2.54}_{-2.76}—

Table II. The extracted internal nature of the proton from the GFFs: AA-term mass radius ⟨RA-term2⟩\sqrt{\langle R_{A\text{-}term}^{2}\rangle}, mechanical radius ⟨Rmech2⟩\sqrt{\langle R_{\mathrm{mech}}^{2}\rangle}, energy radius ⟨RE2⟩\sqrt{\langle R_E^{2}\rangle}, the pressure and energy density in the center of the proton.

Notably, the energy radius derived from GFFs in Eq. (13) can also be written as

⟨RE2⟩=∫d3rr2T00(r)∫d3rT00(r)=−6G(0)dG(t)dt∣t=0(19)\langle R_E^2\rangle= \frac{\int d^3r r^2 T_{00}(r)}{\int d^3r T_{00}(r)} = -\frac{6}{G(0)}\left.\frac{dG(t)}{dt}\right|_{t=0} \tag*{(19)}

which bears a striking resemblance to proton charge and magnetic radius defined from the electric and magnetic form factor [57]. Astonishingly, the proton energy radius 0.85±0.060.85 \pm0.06 fm is close in size to its charge and magnetic radius, as shown in Figure 6. The proton A-term mass radius and mechanical radius are also compared. It reveals an intriguing pattern that the electric, magnetic, as well as gravitational form factor is homologous and delicately governs the enigmatic properties of the proton. Therefore, the accurate measurement of the proAA-term energy radius deserves the same attention as charge and magnetic radius in the future study.

Image not extracted

Figure 6. Cimparison of different proton radius, including the AA-term mass radius, mechanical radius and energy radius from this work and LQCD [10]. The proton charge and magnetic radius are also shown [57].

The pressure and shear forces distributions inside the proton are obtained and displayed in Figure 7. Here the positive sign means repulsion towards the outside, and the negative sign indicates attraction directed towards the inside. The total pressure and shear forces distributions of the sum of the quark and gluon contributions are illustrated as the blue-solid curve in Figure 7. It was found that the pressure is positive

Image not extracted

Figure 7. Left panel: the pressure distribution r2p(r)r^{2}p(r) of the proton. Right panel: the shear forces distribution r2s(r)r^{2}s(r) of the proton. The blue solid curve corresponds to the total pressure and shear forces distribution, while the red dotted and green dashed curve denote the quark and gluon contributions to the total, respectively.

in the inner region, and negative in the outer region, with a zero crossing near r=0.63r=0.63 fm, which shows that the repulsive and binding pressures dominate in the proton are separated in radial space. Moreover, the shear forces reaches its distribution peaking near r=0.66r=0.66 fm in our observation.

Dq(t)D_q(t) Result with Model-Independent Algorithm

In our previous work, Dq(t)D_q(t) results for the NTVMP process were given. However, comparison with the results of other models in Ref. [4] that there are large differences between the different models. Therefore we introduce a generalized model-independent algorithm for further validation, which is called the Resonances Via Padé (RVP) method based on the Schlessinger Point Method (SPM) [58, 59, 60]. The method is essentially an interpolation approximation that relies only on experimental data points. When given a finite dataset {(xi,yi)∣i=1,2,⋯ ,N}\{(x_i,y_i)|_{i=1,2,\cdots,N}\} with a data volume of NN, the function y(x)y(x) can be accurately reconstructed by constructing the interpolating continuous partition CN(x)C_N(x) via SPM.

CN(x)=y11+a1(x−x1)1+a2(x−x2)1+⋯aN−1(x−xN−1)(20)C_N(x)=\frac{y_1}{1+\frac{a_1(x-x_1)}{1+\frac{a_2(x-x_2)}{1+\cdots\frac{a_{N-1}(x-x_{N-1})}{}}}} \tag*{(20)}

where the coefficients {ai∣i=1,2,⋯ ,N−1}\{a_i|i=1,2,\cdots,N-1\} can be constructed recursively via Eq. (21) and ensured that y(xi)=CN(xi)y(x_i)=C_N(x_i).

a1=y1/y2−1x2−x1a_1=\frac{y_1/y_2-1}{x_2-x_1}
ai=1xi−xi+1[1+ai−1(xi+1−xi−1)1+⋯a1(xi+1−x1)1−y1/yi+1](21)a_i=\frac{1}{x_i-x_{i+1}}\left[1+\frac{a_{i-1}(x_{i+1}-x_{i-1})}{1+\cdots\frac{a_1(x_{i+1}-x_1)}{1-y_1/y_{i+1}}}\right] \tag*{(21)}

For GFFs, only experimental data from DVCS were available. Therefore the form of Dq(t)D_q(t) under the RVP method can be obtained by bringing the experimental data points from DVCS into Eqs. (20) (21) and simplifying it:

DqRVP(Q)=0.061913−0.346966Q−0.004908Q2−0.033875+0.010085Q+Q2(22)D_q^{\mathrm{RVP}}(Q)=\frac{0.061913-0.346966Q-0.004908Q^2}{-0.033875+0.010085Q+Q^2} \tag*{(22)}

where Q=−tQ=-t.

The comparison of the numerical results of Eq. (22) with the NTVMP process is shown in Figure 8. It can be seen that the result of Dq(t)D_q(t) of this model-independent algorithm is more supportive of NTVMP process. In addition, comparing to other models in Ref. [4], the results of these works seem to conform better to the experimental data and LQCD determinations. However, there are several issues that need to be clarified regarding the results obtained by the RVP method:

Image not extracted

Figure 8. Blue solid line: quark DD-term results obtained by reconstructing the DVCS experimental data points using the RVP method based on SPM; Red dashed line: quark DD-term in NTVMP process; And compared with the LQCD results.

  • Feasibility of interpolation and extrapolation: The RVP method based on the SPM belongs to a kind of Padé approximation, which can accurately reconstruct an underlying function from data points. Its radius of convergence is determined by a branch point of the function, which is located near the real-axis domain of the data sample. Also the discrete nature of the method ensures that its results can be reasonably extended over a wider range. For example, ∣t∣∈[0.1,0.4] GeV2|t| \in[0.1,0.4]\,\mathrm{GeV}^{2} in the experimental data of DVCS, whereas we finally extrapolate our results to ∣t∣=2 GeV2|t|=2\,\mathrm{GeV}^{2} and are in good agreement with both NTVMP process and LQCD determinations. In addition, other hadron physics related problems are accurately calculated and their feasibility is illustrated in Ref. [60, 61, 62, 63] by this method.

  • Identification of threshold energies and poles: From the results in Figure 8, it can be noticed that the results shown by the RVP method have a pole at ∣t∣=0.178 GeV2|t|=0.178\,\mathrm{GeV}^{2} and that the point also corresponds to the result with the largest error in the LQCD. This may be a coincidence, but it was pointed out in Ref. [60, 61] that the RVP method has the ability to identify threshold energies and poles. Because the underlying function reconstructed by this method exhibits non-canonicality as it approaches the poles, and this non-canonical behaviour provides a clear indication of the region where the poles are located. Therefore, we conjecture that there may

be some kind of interesting physics phenomenology at ∣t∣=0.178 GeV2|t| = 0.178\,\mathrm{GeV}^{2}, which we will investigate in our subsequent work.

At present, due to the limited experimental data, we only calculate the quark DD-term in GFFs by RVP method. In the future, with the updating of experimental data, we will use this method to systematically study the GFFs of proton more deeply.

Summary and Discussion

In this work, based on the present light vector meson ρ0\rho^{0} and heavy quarkonium J/ψJ/\psi photoproduction data, a groundbreaking analysis of the complete proton GFFs connecting the energy-momentum tensor and the NTVMP are investigated. The obtained GFFs are compared with the DVCS experimental results and LQCD determinations [10]. It turns out that the quark DD-term is comparable with the current result, while differences persist between our statements on the quark AA-term and the LQCD results [10]. For gluon GFFs, the value of gluon AA- and DD-term are approximately consistent with the LQCD results [10]. These results presented within this work illustrate the remarkable revelation that the NTVMP process offer tremendous potential for obtaining the complete proton GFFs. Conversely, the connection between heavy quarkonium photoproduction and gluon GFFs also faces challenges. One study revealed that this process is light-cone dominated and has no direct connection with gluon GFFs [56]. Thereby, further exploration of the physical mechanisms becomes imperative.

This work employ a first-ever definition pattern about the mean square radius of the mass distribution, comprising the sum contributions of quark and gluon inside the proton. This definition pattern in Eq. (7) differs from that of the previous works. From our perspective, the previous direct extraction from vector meson photoproduction [5, 12, 13, 28] reflects the energy distribution (see Eqs. (13) and (19)) instead of the mass distribution inside the proton. Because these works assume that G(t)G(t) can be considered as a mass distribution when ∣t∣|t| is small enough that G(t)≈MA(t)G(t) \approx MA(t). This study tries to clarify this point and develops the specific values of the AA-term mass radius and energy radius from the mass and energy distribution. Moreover, the total DD-form factor is helpful for investigating their applications in descripting the mechanical properties. Correspondingly, the pressure and shear forces distributions inside proton are obtained. We achieve the internal nature of the proton, including the proton AA-term mass radius, mechanical radius and energy radius, normal forces and energy density distribution in the proton system, respectively.

Considering that there are differences in the distributions of GFFs of proton given by different theoretical models [4]. In order to reduce the influence of parameters and models on physical results, we use RVP method to compute quark DD-term based on DVCS experimental data . The results demonstrate that this model-independent generalized algorithm is more supportive of the NTVMP process in this work. Subsequently, we also consider other computational methods, such as machine learning [60, 61, 62, 63, 64], to do further research targeting other contributions of GFFs.

In this work, the NTVMP process offer significant information for the study of proton GFFs. Therefore, the high-precision photo/electroproduction data of light and heavy vector mesons (including ρ0\rho^{0}, ω\omega, ϕ\phi, J/ψJ/\psi, and Υ\Upsilon) are very needed, which can be realized in the future at the EIC and EICs [32] and EICs [33, 34, 35]. Moreover, this study will offer theoretical reference for the GFFs measurement in the future DVCS experiments and other indirect measurement in exclusive processes.

Acknowledgments

This work is supported by the National Natural Science Foundation of China under Grant Nos. 12065014 and 12047501, and by the Natural Science Foundation of Gansu province under Grant No. 22JR5RA266. We acknowledge the West Light Foundation of The Chinese Academy of Sciences, Grant No. 21JR7RA201.

References

  1. [1]I. Y. Kobzarev and L. B. Okun, “GRAVITATIONAL INTERACTION OF FERMIONS,” Zh. Eksp. Teor. Fiz. 43, 1904-1909 (1962).
  2. [2]H. Pagels, “Energy-Momentum Structure Form Factors of Particles,” Phys. Rev. 144, 1250-1260 (1966).DOI
  3. [3]M. V. Polyakov, “Generalized parton distributions and strong forces inside nucleons and nuclei,” Phys. Lett. B 555, 57-62 (2003).DOI
  4. [4]M. V. Polyakov and P. Schweitzer, “Forces inside hadrons: pressure, surface tension, mechanical radius, and all that,” Int. J. Mod. Phys. A 33, 26, 1830025 (2018).DOI
  5. [5]D. E. Kharzeev, “Mass radius of the proton,” Phys. Rev. D 104(5), 054015 (2021).DOI
  6. [6]V. D. Burkert, L. Elouadrhiri and F. X. Girod, “The pressure distribution inside the proton,” Nature 557, 7705, 396-399 (2018).DOI
  7. [7]P. E. Shanahan and W. Detmold, “Pressure Distribution and Shear Forces inside the Proton,” Phys. Rev. Lett. 122, 072003 (2019).DOI
  8. [8]P. E. Shanahan and W. Detmold, “Gluon gravitational form factors of the nucleon and the pion from lattice QCD,” Phys. Rev. D 99, 014511 (2019).DOI
  9. [9]D. A. Pefkou, D. C. Hackett and P. E. Shanahan, “Gluon gravitational structure of hadrons of different spin,” Phys. Rev. D 105, 054509 (2022).DOI
  10. [10]D. C. Hackett, D. A. Pefkou and P. E. Shanahan, “Gravitational form factors of the proton from lattice QCD,” [arXiv:2310.08484].DOI
  11. [11]V. D. Burkert, L. Elouadrhiri, F. X. Girod, C. Lorcé, P. Schweitzer and P. E. Shanahan, “Colloquium: Gravitational Form Factors of the Proton,” [arXiv:2303.08347].arxiv.org/abs/2303.08347
  12. [12]X. Y. Wang, F. Zeng, and Q. Wang, “Systematic analysis of the proton mass radius based on photoproduction of vector charmoniums,” Phys. Rev. D 105, 096033 (2022).DOI
  13. [13]X. Y. Wang, F. Zeng, Q. Wang and L. Zhang, “First extraction of the proton mass radius and scattering length |αₚ₀| from ρ⁰ photoproduction,” Sci. China Phys. Mech. Astron. 66, 232012 (2023).DOI
  14. [14]R. Wang, J. Evslin and X. Chen, “The origin of proton mass from J/ψ photo-production data,” Eur. Phys. J. C 80, 507 (2020).DOI
  15. [15]X. Ji and Y. Liu, “Quantum anomalous energy effects on the nucleon mass,” Sci. China Phys. Mech. Astron. 64, 281012 (2021).arxiv.org/abs/2101.04483
  16. [16]X. Ji, “Proton mass decomposition: naturalness and interpretations,” Front. Phys. (Beijing) 16, 64601 (2021).arxiv.org/abs/2102.07830
  17. [17]X. Y. Wang, J. Bu and F. Zeng, “Analysis of the contribution of the quantum anomaly energy to the proton mass,” Phys. Rev. D 106, 094029 (2022).DOI
  18. [18]I. I. Strakovsky, S. Prakhov, Y. I. Azimov, P. Aguar-Bartolomé, J. R. M. Annand, H. J. Arends, K. Bantawa, R. Beck, V. Bekrenev and H. Berghäuser, et al. “Photoproduction of the ω meson on the proton near threshold,” Phys. Rev. C 91, 045207 (2015).DOI
  19. [19]I. I. Strakovsky, L. Pentchev and A. Titov, “Comparative analysis of ωp, ϕp, and J/ψp scattering lengths from A2, CLAS, and GlueX threshold measurements,” Phys. Rev. C 101, 045201 (2020).DOI
  20. [20]I. Strakovsky, D. Epifanov and L. Pentchev, “J/ψp scattering length from GlueX threshold measurements,” Phys. Rev. C 101, 044201 (2020).DOI
  21. [21]I. I. Strakovsky, W. J. Briscoe, L. Pentchev and A. Schmidt, “Threshold Upsilon-meson photoproduction at the EIC and EicC,” Phys. Rev. D 104, 074028 (2021).DOI
  22. [22]X. Y. Wang, F. Zeng and I. I. Strakovsky, “ψ(∗)p scattering length based on near-threshold charmonium photoproduction,” Phys. Rev. C 106, 015202 (2022).DOI
  23. [23]X. Y. Wang, F. Zeng and Q. Wang, “Gluon gravitational form factors of protons from charmonium photoproduction*,” Chin. Phys. C 47, 074101 (2023).DOI
  24. [24]Y. Guo, X. Ji and Y. Liu, “QCD Analysis of Near-Threshold Photon-Proton Production of Heavy Quarkonium,” Phys. Rev. D 103, 096010 (2021).DOI
  25. [25]X. Ji, Y. Liu and I. Zahed, “Mass structure of hadrons and light-front sum rules in the ’t Hooft model,” Phys. Rev. D 103, 074002 (2021).DOI
  26. [26]P. Sun, X. B. Tong and F. Yuan, “Perturbative QCD analysis of near threshold heavy quarkonium photoproduction at large momentum transfer,” Phys. Lett. B 822, 136655 (2021).DOI
  27. [27]K. A. Mamo and I. Zahed, “Diffractive photoproduction of J/ψ and ϒ using holographic QCD: gravitational form factors and GPD of gluons in the proton,” Phys. Rev. D 101, 086003 (2020).DOI
  28. [28]B. Durand, Z. E. Meziani, S. Joosten, M. K. Jones, S. Prasad, C. Peng, W. Armstrong, H. Atac, E. Chudakov and H. Bhatt, et al. “Determining the gluonic gravitational form factors of the proton,” Nature 615, 813-816 (2023).
  29. [29]Y. Hatta, A. Rajan and D. L. Yang, “Near threshold J/ψ and ϒ photoproduction at JLab and RHIC,” Phys. Rev. D 100, 014032 (2019).DOI
  30. [30]Y. Hatta and D. L. Yang, “Holographic J/ψ production near threshold and the proton mass problem,” Phys. Rev. D 98, 074003 (2018).DOI
  31. [31]Q. Zhao, Z. p. Li and C. Bennhold, “Omega and rho photoproduction with an effective quark model Lagrangian,” Phys. Lett. B 436, 42-48 (1998).DOI
  32. [32]A. Accardi, P. Achenbach, D. Adhikari, A. Afanasev, C. S. Akondi, N. Akopov, M. Albaladejo, H. Albataineh, M. Albrecht and B. Almeida-Zamora, et al. “Strong Interaction Physics at the Luminosity Frontier with 22 GeV Electrons at Jefferson Lab,” [arXiv:2306.09360].arxiv.org/abs/2306.09360
  33. [33]A. Accardi, J. L. Albacete, M. Anselmino, N. Armesto, E. C. Aschenauer, A. Bacchetta, D. Boer, W. K. Brooks, T. Burton and N. B. Chang, et al. “Electron Ion Collider: The Next QCD Frontier: Understanding the glue that binds us all,” Eur. Phys. J. A 52, 268 (2016).
  34. [34]V. D. Burkert, L. Elouadrhiri, A. Afanasev, J. Arrington, M. Contalbrigo, W. Cosyn, A. Deshpande, D. I. Glazier, X. Ji and S. Liuti, et al. “Precision Studies of QCD in the Low Energy Domain of the EIC,” doi:10.1016/j.ppnp.2023.104032.DOI
  35. [35]D. P. Anderle, V. Bertone, X. Cao, L. Chang, N. Chang, G. Chen, X. Chen, Z. Chen, Z. Cui and L. Dai, et al. “Electron-ion collider in China,” Front. Phys. (Beijing) 16, 64701 (2021).DOI
  36. [36]H. Fleurbaey, S. Galtier, S. Thomas, M. Bonnaud, L. Julien, F. Biraben, F. Nez, M. Abgrall and J. Guéna, “New Measurement of the 1S − 3S Transition Frequency of Hydrogen: Contribution to the Proton Charge Radius Puzzle,” Phys. Rev. Lett. 120, 183001 (2018).DOI
  37. [37]K. A. Mamo and I. Zahed, “Nucleon mass radii and distribution: Holographic QCD, Lattice QCD and GlueX data,” Phys. Rev. D 103, 094010 (2021).DOI
  38. [38]X. B. Tong, J. P. Ma and F. Yuan, “Perturbative calculations of gravitational form factors at large momentum transfer,” JHEP 10, 046 (2022).DOI
  39. [39]V. Braun, R. J. Fries, N. Mahnke and E. Stein, “Higher twist distribution amplitudes of the nucleon in QCD,” Nucl. Phys. B 589, 381-409 (2000).DOI
  40. [40]V. M. Braun, A. Lenz and M. Wittmann, “Nucleon Form Factors in QCD,” Phys. Rev. D 73, 094019 (2006).DOI
  41. [41]X. D. Ji, “Lorentz symmetry and the internal structure of the nucleon,” Phys. Rev. D 58, 056003 (1998).DOI
  42. [42]T. J. Hou, J. Gao, T. J. Hobbs, K. Xie, S. Dulat, M. Guzzi, J. Huston, P. Nadolsky, J. Pumplin and C. Schmidt, et al. “New CTEQ global analysis of quantum chromodynamics with high-precision data from the LHC,” Phys. Rev. D 103, 014013 (2021).DOI
  43. [43]C. Alexandrou, S. Bacchio, M. Constantinou, J. Finkenrath, K. Hadjiyiannakou, K. Jansen, G. Koutsou, H. Panagopoulos and G. Spanoudes, “Complete flavor decomposition of the spin and momentum fraction of the proton using lattice QCD simulations at physical pion mass,” Phys. Rev. D 101, 094513 (2020).DOI
  44. [44]Y. B. Yang, J. Liang, Y. J. Bi, Y. Chen, T. Draper, K. F. Liu and Z. Liu, “Proton Mass Decomposition from the QCD Energy Momentum Tensor,” Phys. Rev. Lett. 121, 212001 (2018).DOI
  45. [45]R. Fiore, L. Jen-kowsky and M. Oleksiienko, “On Matter and Pressure Distributions in Nucleons,” Phys. Part. Nucl. Lett. 18, 5, 540-547 (2021).arxiv.org/abs/2112.00605
  46. [46]G. P. Lepage and S. J. Brodsky, “Exclusive Processes in Perturbative Quantum Chromodynamics,” Phys. Rev. D 22, 2157 (1980).
  47. [47]M. Battaglieri et al. [CLAS], “Photoproduction of the rho0 meson on the proton at large momentum transfer,” Phys. Rev. Lett. 87, 172002 (2001).
  48. [48]R. L. Workman et al. [Particle Data Group], “Review of Particle Physics,” PTEP 2022, 083C01 (2022).
  49. [49]A. Ali et al. [GlueX], “First Measurement of Near-Threshold J/ψ Exclusive Photoproduction off the Proton,” Phys. Rev. Lett. 123, 072001 (2019).DOI
  50. [50]B. Gittelman, K. M. Hanson, D. Larson, E. Loh, A. Silverman and G. Theodosiou, “Photoproduction of the psi (3100) Meson at 11-GeV,” Phys. Rev. Lett. 35, 1616 (1975).
  51. [51]U. Camerini, J. G. Learned, R. Prepost, C. M. Spencer, D. E. Wiser, W. Ash, R. L. Anderson, D. Ritson, D. Sherden and C. K. Sinclair, “Photoproduction of the psi Particles,” Phys. Rev. Lett. 35, 483 (1975).
  52. [52]P. L. Frabetti et al. [E687], “A Measurement of elastic J / psi photoproduction cross-section at fermilab E687,” Phys. Lett. B 316, 197-206 (1993).DOI
  53. [53]M. J. Amarian, “Strangeness and charm production with HERMES,” Few Body Syst. Suppl. 11, 359-362 (1999).DOI
  54. [54]C. Wu, J. Barth, W. Braun, J. Ernst, K. H. Glander, J. Hannappel, N. Jopen, H. Kalinowsky, F. J. Klein and F. Klein, et al. “Photoproduction of rho0 mesons and Delta-baryons in the reaction gamma p --> pi+ pi- pi+ at energies up to s**(1/2) = 2.6-GeV,” Eur. Phys. J. A 23, 317-344 (2005).
  55. [55]Y. Z. Xu, K. Raya, Z. F. Cui, C. D. Roberts and J. Rodríguez-Quintero, “Empirical Determination of the Pion Mass Distribution,” Chin. Phys. Lett. 40, 041201 (2023).DOI
  56. [56]P. Sun, X. B. Tong and F. Yuan, “Near threshold heavy quarkonium photoproduction at large momentum transfer,” Phys. Rev. D 105, 054032 (2022).DOI
  57. [57]J. C. Bernauer, “The proton radius puzzle – 9 years later,” EPJ Web Conf. 234, 01001 (2020).DOI
  58. [58]L. Schlessinger and C. Schwartz, “Analyticity as a Useful Computation Tool,” Phys. Rev. Lett. 16, 1173-1174 (1966).DOI
  59. [59]L. Schlessinger, “Use of Analyticity in the Calculation of Nonrelativistic Scattering Amplitudes,” Phys. Rev. 167, 1411 (1968).DOI
  60. [60]R. A. Tripolt, I. Haritan, J. Wambach and N. Moiseyev, “Threshold energies and poles for hadron physical problems by a model-independent universal algorithm,” Phys. Lett. B 774, 411-416 (2017).DOI
  61. [61]D. Binosi, A. Pilloni and R. A. Tripolt, “Study for a model-independent pole determination of overlapping resonances,” Phys. Lett. B 839, 137809 (2023).
  62. [62]Z. F. Cui, D. Binosi, C. D. Roberts and S. M. Schmidt, “Fresh Extraction of the Proton Charge Radius from Electron Scattering,” Phys. Rev. Lett. 127, 092001 (2021).DOI
  63. [63]Z. F. Cui, D. Binosi, C. D. Roberts and S. M. Schmidt, “Pauli Radius of the Proton,” Chin. Phys. Lett. 38, no.12, 121401 (2021).DOI
  64. [64]H. Dutrieux, C. Lorcé, H. Moutarde, P. Sznajder, A. Trawiński and J. Wagner, “Phenomenological assessment of proton mechanical properties from deeply virtual Compton scattering,” Eur. Phys. J. C 81, 300 (2021).DOI

Paper details

vlnc:W_k29j48xg
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents