betaFeedback

WorksPhysics and Astronomy

Sustainability-informed materials design

Abstract

While material innovation can enable sustainable development, environmental and social impacts of emerging materials are often assessed only after design choices are "locked in." Here, we argue for a shift in perspective: life cycle thinking should enter at the earliest stages of materials development, where uncertainty is highest but design freedom is greatest. Rather than treating incomplete knowledge as a barrier, we reframe it as an inherent feature that can illuminate trajectories, tradeoffs, and consequences – and enable intervention while change remains possible. Focusing on inorganic solid materials, we identify disconnects between materials science and sustainability analysis, propose an adaptable, decision-oriented framework to embed sustainability into material design across evolving technology stages, and highlight how recent advances such as predictive synthesis can help operationalize this integration. Guided by the framework's governing principles, we outline a cross-stakeholder agenda to shift from retrospective correction to anticipatory, responsible material design from the outset.

Motivation

The transition to a low-carbon future will require technologies enabled by advances in functional materials, yet the sustainability of these new materials is not guaranteed from the outset. Early design choices can have cascading consequences, shaping downstream impacts that are difficult to mitigate once systems scale. An illustrative example is lithium-ion battery cathode materials, where cobalt-use has led to social and environmental harms, and delayed industry response has necessitated costly redesigns.[1, 2] Because early choices in the research cycle constrain future sustainability outcomes, responsible deployment of new materials will require designing for reduced adverse impacts alongside performance and cost.

Life cycle thinking (LCT) and its quantitative tool, life cycle assessment (LCA), provide a comprehensive framework for evaluating environmental burdens from extraction through end-of-life.[3, 4] However, as illustrated in Figure 1, LCA is typically applied retrospectively at from the pilot stage onward, where harmful impacts may be “locked in” and redesign is costly.[5] LCA is often perceived as impractical at low technology readiness levels (TRLs) due to high uncertainty, limited process data, and unknown scale-up trajectories. Yet at low-TRLs this uncertainty reflects substantial remaining design freedom—precisely where assessment can still inform scale-up decisions and meaningfully influence outcomes. For emerging technologies, uncertainty and decision relevance are thus inseparable.

Schematic representation of the current state of sustainability impact assessment in inorganic solid-state materials across various technology readiness levels

Figure 1. Schematic representation of the current state of sustainability impact assessment in inorganic solid-state materials across various technology readiness levels (TRLs). “Design flexibility” reflects the degrees of freedom in material and process choices, while “assessment likelihood” reflects the practical feasibility and commonness of practice of applying life cycle assessment (LCA) or related life cycle thinking (LCT) methods. TRL positions and curve shapes are illustrative and not intended to represent precise, quantitative relationships.

In parallel, recent years have seen the emergence of data-driven workflows for inorganic solid-state materials discovery, increasingly coupled with machine learning (ML) and autonomous experimentation.[6, 7, 8] These developments are moving the field toward inverse design, marked by searches over vast design spaces for both candidate materials with targeted properties and for plausible pathways to synthesize them. In principle, predictive synthesis tools could generate candidate reaction pathways, precursors, and processing conditions to help address data gaps and construct the life cycle inventories (LCIs) used as input to early-stage LCA; while

retrosynthesis-informed LCA workflows are emerging in organic and green chemistry,[9, 10, 11] analogous integration remains limited for inorganic solids.

Here, we argue there is both an opportunity and a need to break down disciplinary silos between materials discovery and sustainability assessment. We propose a framework and concrete actions to integrate LCT into materials design from the earliest stages (∼TRL 1–3), where choices about composition, synthesis, and performance targets remain most flexible—and thus most impactful. Early focus also enables a reframing of sustainability assessment itself: rather than relying on conventional LCA constraints of well-defined data, we advocate for an LCT approach that starts from just the basic information available at discovery and leverages uncertainty to define tunable design spaces. As technologies mature, this approach can be iteratively refined with increasing data and fidelity, ultimately converging towards the conventional LCA common at higher TRLs. Our discussion highlights environmental impacts of solid-state materials, but its principles are broadly applicable across materials, impact categories, and complementary methods such as techno-economic analysis (TEA).

Vision: Life Cycle Thinking as a Design Principle

We propose a framework to embed LCT in materials discovery at the point of material selection to inform concrete research decisions, rather than deferring until key design choices are fixed. Figure 2 outlines how LCT can guide early-stage materials design while remaining compatible with higher-fidelity assessment as technologies mature, and is constructed to align with the five core principles.

A vision and framework for life cycle thinking in materials design

Figure 2. A vision and framework for life cycle thinking (LCT) in materials design. (a) Comparison of conventional material R&D’s focus on performance and cost (i) with a proposed pathway integrating LCT into early-stage materials design (ii). Conventional workflows occasionally consider sustainability ad hoc checks (e.g., “earth-abundance” or toxicity, based on elemental composition), but rarely consider process-level implications across the life cycle. The proposed pathway introduces a dedicated life-cycle–informed design step. (b) Modular framework for incorporating LCT into early-stage materials design, with tasks organized according to the four ISO-standardized phases of LCA[3, 4]: goal and scope (system boundaries, functional units, and available process parameters), life cycle inventory (LCI) (candidate synthesis routes; estimated material and energy flows), life cycle impact assessment (LCIA) (impact quantification; note most LCA focuses on environmental impact factors, but emerging social LCA is shown here for reference) and interpretation (contextualizing results). Tasks within each phase need not be applied simultaneously; early-stage analyses may focus on a subset sufficient to bound dominant drivers. The schematic highlights representative considerations for low TRLs and is not exhaustive—tasks may be added, refined, or omitted as technologies mature and new data becomes available (e.g., microstructure unlikely relevant at TRL 1; reaction prediction unnecessary once synthesis is demonstrated).

  1. Bottom-up construction. At early TRLs, sustainability assessment should begin from information available at discovery (or inferrable from first-principles), e.g., composition, structure, plausible synthesis pathways. In contrast to a conventional top-down LCA approach—requiring complete process flows, supply chains, operating conditions, and use-phase details—a bottom-up approach builds outward from the material itself and treats unknowns as scenarios or bounds. This makes assessment actionable for discovery-stage research, where multiple pathways remain open and knowledge is necessarily partial but still informative.

  1. Uncertainty as information. Rather than a reason to defer analysis, uncertainty at low TRLs can be reframed as an explicit modeling feature. Applied as a source of insight, uncertainty bounds and scenarios can reveal dominant drivers and leverage points, even when precise estimates are not possible. Framed this way, uncertainty becomes productive: it can help define tunable design spaces and guide where additional R&D focus could most effectively reduce impacts.

  1. Enabling progressive, iterative refinement across TRLs. Early-stage LCT, while not itself a full LCA, should be structured to preserve compatibility with high-TRL assessments by aligning with ISO-defined methodological steps[3, 4]—goal and scope, LCI, life cycle impact assessment (LCIA), and interpretation—and conventional life cycle phases. This allows continuous evolution towards a full LCA as technologies mature, with assumptions progressively refined, proxies replaced by measured data, and uncertainty narrowed through iteration rather than model replacement. As TRL increases, the role of assessment shifts from broad screening and bounding to pathway-specific comparison and higher-fidelity evaluation, reframing sustainability assessment as an iterative loop that co-evolves with design.

  1. Decision relevance over precision. The purpose of low-TRL LCT is distinct from that of high-TRL LCA: it is not to produce or certify definitive impact values, but to inform choices and support ranking and prioritization among materials, pathways, and research directions. Emphasizing decision relevance over numerical precision allows sustainability considerations to shape which options are explored and which tradeoffs are pursued, without imposing inappropriate expectations of accuracy under deep uncertainty.

  1. Integration through interoperable, modular design. Materials databases, process models, and life-cycle inventories are fragmented across platforms, use incompatible taxonomies, and are often subject to access restrictions. Interoperability, shared ontologies, and open access are therefore essential for materials informatics and LCT tools to work together, and to enable a shift from static datasets toward dynamic, science-grounded models that can evolve as knowledge improves.

Together, these principles define an approach to LCT that treats sustainability as a performance metric—alongside functionality and cost—to inform early design decisions without constraining exploration.

Enabling Advances: From Principles to Practice

Recent developments mark a shift towards the feasibility of early-stage LCT, enabled not by a single breakthrough but by a convergence of advances across disciplines. Figure 2 outlines a practical implementation of our LCT framework, intended as modular rather than prescriptive (e.g., only a subset of tasks might be considered at low TRLs). It begins with a modified ISO-defined “goal and scope” phase (Figure 2b, phase 1) to define the decision context and establish bounds on material parameters (e.g., available precursors). Here, we highlight recent advances that enable implementation of the framework—especially in LCI setup, decision-relevant assessment, and data integration—and identify remaining challenges.

Early-Stage Life Cycle Inventory Construction

The primary challenge of estimating impacts for new materials without fully specified process data is translation: mapping structure-level materials information to plausible material and energy flows without a fully specified process. Here, we introduce how a foreground LCIs could be bottom-up constructed by assembling bounded, scenario-based models of material and energy flows from what is knowable at discovery (see Figure 2 panel 2). A key enabling factor is the rapid acceleration of materials informatics and generative modeling.

While synthesis routes were historically established through experimental trial-and-error, new techniques now allow plausible processing pathways to be enumerated much earlier.[12, 13, 14, 15] Starting from just the target material (e.g., a crystal structure), as well as constraints such as available precursors and synthesis methods, predictive synthesis can propose potential reaction sequences and thermodynamic processing ranges (e.g., temperature, pressure). Approaches in inorganic solids span from physics-based models (e.g., reaction networks)[16, 17, 18, 19] to ML-based methods (e.g., graph, sequence, diffusion, large language models),[20, 21, 22, 23, 24, 25, 26, 27, 28] and can support explicit uncertainty quantification (e.g., ensemble or Bayesian approaches)[18, 19, 25] These models—as well as literature-, patent-, and data-mined synthesis routes for known materials[29, 30, 31, 32, 33]—are increasingly published as open datasets, providing access without needing to run models, but work is needed to standardize synthesis terminology and representations.[34] Crucially, these reactions could be used to define input/output (i/o) flows sufficient to construct LCIs, yet they remain underutilized in LCT workflows.

Beyond stoichiometric reactions, the energetic transformations required to achieve a specific material form (e.g., purity, morphology, or microstructure) often drive life cycle impacts. For example, in silicon solar cells, purification to solar-grade (>99.999999%>99.999999\% pure Si)[35] and melting into crystalline ingots dominate energy and carbon intensity.[36] Conventional process simulation tools (e.g., Aspen Plus) can model energy in chemical processes for LCI,[37] but often rely on proprietary environments and rigid process definitions that limit interoperability with both materials and LCA platforms.[38] Integrating estimates into end-to-end workflows would require open, scalable tools that leverage reaction energetics, phase behavior, and process heuristics—such as surrogate,[39, 40] ML,[41, 42, 43] and other open process modeling tools (e.g., DWSIM,[44] biosteam, “ideas”[45])—to provide physically grounded bounds on processing energy that can be incorporated as i/o flows.

As technologies advance through TRLs, experimental measurements can progressively replace or refine these modeled bounds. Alternatively, when research begins in the lab rather than via computation, documenting synthesis routes in inventory-relevant terms—such as precursor choices, reaction stoichiometry, yields, and processing conditions—could allow build-up of similar i/o models, and evolution alongside process development and scale-up aligned with prospective LCA methods. In this setting, inventory-informed synthesis optimization could also be explored, e.g., through autonomous labs or Bayesian-inference approaches that iteratively refine synthesis conditions while evaluating impact implications.[46]

Once candidate i/o models are defined, parametric foreground LCIs can explicitly encode uncertainty into stoichiometry, yields, energy-intensities, or process-level efficiencies. Recent developments across prospective LCA[47, 48] and statistical proxy methods (e.g., underspecification[49]) allow LCI construction based on ranges, analog processes, and scenario assumptions rather than as fully specified unit operations. Scenario-based and probabilistic representations can propagate uncertainty across alternative synthesis routes, processing conditions, and learning trajectories, preserving multiple plausible inventories (e.g., scale-up scenarios).[50, 51]

Decision-Relevant Life Cycle Impact Assessment (LCIA) and Interpretation

Existing LCIA methods can be applied to any LCI, including those derived from early-stage, highly uncertain data. As in conventional LCA, the challenge is typically not the impact calculation itself—since mapping the LCI to impact indicators is largely embedded within standard LCA software—but rather in selecting which impact categories (e.g., greenhouse gas (GHG) emissions, water use) are most relevant and interpreting results under deep uncertainty.[52]

A unique challenge of novel materials is that their environmental and health interactions are not well characterized, and therefore likely lack established characterization factors, the coefficients used in LCIA to translate inventory flows into impact indicators (e.g., climate or toxicity impacts).[53, 54] Nevertheless, analysis remains informative because upstream “background” processes (e.g., energy supply, solvents, common precursors) are relatively well characterized and often dominate cradle-to-gate impacts of materials.[5, 55] An early-stage LCT framework should therefore flexibly support multiple LCIA methods while allowing for provisional mappings, proxy indicators, or scenario-based characterization where factors are unavailable.

At low TRLs, assigning precise impact scores or rankings can be misleading, as apparent differences often reflect modeling assumptions rather than real distinctions.[56, 57] Applying principles of “uncertainty as information” and “decision relevance over precision,” the aim shifts from confirmation to guiding exploration of feasible trajectories within design space.[58] Established LCA methods—e.g., stochastic and sensitivity analyses, scenario comparison, and simple bounding—can be integrated to evaluate outcomes as conditional and distributional rather than fixed.[5, 47, 59, 60, 61] Emerging probabilistic frameworks further enable representation of low-TRL uncertainty, propagation of parameterized inventories, and evaluation across evolving scenarios, supporting identification of hotspots and decision-relevant thresholds with associated confidence.[55, 62, 63, 64, 65, 66, 67] Relatedly, early-stage LCT is often benchmarked against incumbents, but such comparisons require caution due to TRL mismatches and uncertain scale-up;[5, 68] prospective LCA methods help account for learning effects, process improvements, and evolving benchmarks.[69, 70, 71]

When interpreting early-stage LCT, it is important to keep in mind both the presence of value-laden choices and the distinction between informing versus making decisions. LCA structures information about potential consequences and tradeoffs, but interpreting results—such as weighting impacts or setting acceptable uncertainty thresholds—necessarily involves contextual, value-laden choices.[4, 72] Early-stage LCT can help anticipate and communicate potential implications transparently to inform decision-making, but—as with standard LCA—actually making decisions remains the responsibility of informed stakeholders.

Integration, Interoperability, and Accessibility

Emerging advances in open data and infrastructure further enable this vision, especially tools following FAIR principles: Findability, Accessibility, Interoperability, and Reuse.[73] On the engineering side, open databases of materials calculations[74, 75, 76, 77, 78] and chemical data[79, 80, 81] provide access to property and process information, while corresponding open software enables analysis.[38, 44, 45, 82, 83, 84] Meanwhile, open-source LCA frameworks like Brightway support parametric LCI construction and dynamic integration with uncertainty analyses tools and other open software,[65, 85, 86] while open LCI databases (the exception, not the norm) provide standardized background systems that can be coupled to chemistry-informed foreground models.[87, 88]

Within this ecosystem, ML models can function as translators across layers—not as a fully-automated replacement to LCT. In addition to ML-enabled advances across synthesis prediction[89, 90] and chemical process simulation,[91, 92] data-driven LCA methods are rapidly increasing[93, 94, 95], with promising low-TRL applications in surrogate process modeling,[96] e.g., automated LCI construction,[97] scenario generation for prospective LCA,[10] and guiding uncertainty assessment.[98] Data-driven methods could help bridge materials, processes, and inventory modeling within unified workflows, and enable multi-objective exploration of performance, cost, and sustainability impacts under uncertainty.

At the same time, this integration highlights an important boundary: automatically filling data gaps risks optimizing the wrong objective when sustainability priorities are implicit or undefined. Integrating LCT into materials discovery therefore requires transparent coupling of models and metrics, with automation supporting interpretation and comparison rather than resolving value-laden tradeoffs. Furthermore, the rapid proliferation of competing ML models, limited standardization and unclear validation practices hinder reliable application in decision-relevant LCA workflows, and adherence with FAIR principles (e.g., cross-domain interoperability) remains an open challenge.[73]

A Plan for Coordination Across Fields

While many building blocks are in place, realizing life cycle–aware materials design at early TRLs will require coordinated effort across materials science, engineering, assessment, and research infrastructure. We outline below concrete priorities, grouped by stakeholder(s), and emphasize that many of these are not specific to LCA, and are complementary with other research priorities.

  • Align predictive synthesis with LCT relevance

    Stakeholder(s): Computational materials scientists

    Extend predictive synthesis tools beyond equilibrium and single-step reactions to capture non-equilibrium pathways, metastability, morphology dependence, purification, and multi-step routes. Expand tools beyond solid-state synthesis routes (e.g., sol-gel, solvothermal, microwave, thin film). Standardize synthesis taxonomies and data formats, and benchmark predictive performance so outputs can inform process modeling and early-stage LCIs.

  • Link process modeling to material design data

    Stakeholder(s): Process engineers & modelers

    Build on existing methods to estimate processing energy at low TRLs, including heating, cooling, mixing, separations, and purification. Better link process models to synthesis routes and material properties, and formalize concept-to-commercial scale-up and learning trajectories. For such assumption-sensitive and cross-disciplinary workflows, open models and data are essential for critical evaluation, interoperability, and cumulative improvement.

  • Expand materials-informed inventories

    Stakeholder(s): LCA data curators & materials scientists

    Extend LCI data structures to represent chemistry-, form-, and especially purity-specific variants of materials, informed by thermodynamic and materials property data. Support parametric inventories that evolve with increasing TRL. Advance approaches for handling emerging materials that lack established LCA characterization factors (e.g., proxy mappings, grouping strategies, semi-automated provisional characterization).[53, 99, 100, 101]

  • Establish best practices for early-stage LCT

    Stakeholder(s): LCA/LCA analysts & methods developers

    Build consensus on protocols for LCT of emerging technologies, including uncertainty representation, scale-up modeling, incumbent comparisons, impact category selection, treatment of novel materials without LCIA characterization factors, and decision-informed interpretation appropriate to low TRLs.

  • Build interoperable, open data infrastructures Stakeholder(s): Data scientists across fields Develop open, interoperable data structures and modular workflows linking materials, synthesis, process, and LCI databases, supported by standardized taxonomies and shared ontologies that make benchmarking, comparison, and tool integration possible.

  • Practice uncertainty-informed, LCT at low TRLs Stakeholder(s): Materials designers & R&D teams Integrate provisional LCT considerations into early materials selection, synthesis planning, and performance screening. Reframe uncertainty as a design feature: work with bounds, ranges, and feasible design windows to compare options and guide prioritization, even under incomplete knowledge.

  • Leverage & integrate early-stage LCT incentives Stakeholder(s): Decision-makers & funders Embed LCT into funding calls, review criteria, technology due diligence, and project milestones, recognizing competitive advantages LCT can bring. Co-integration with TEA is particularly tractable, leveraging overlapping process and inventory data needs. Reward uncertainty-aware analysis, transparency, and independent review to reduce bias. Support shared infrastructure and standardized reporting to enable integration across materials, process, and sustainability communities.

  • Coordinate targeted cross-disciplinary efforts Stakeholder(s): Funders, institutions & leaders across fields Integration will not emerge through ad hoc collaboration alone;[102] it requires committed champions, explicit incentives, sustained funding, and coordination hubs.[103, 104] Priorities include targeted workshops and facilitated dialogue to build shared language, mentoring and co-advised trainee models to sustain integration, paired funding calls to incentivize joint projects, and stewardship of shared datasets and open models—and learning from past cross-disciplinary successes.[73, 78, 105, 106, 107]

Conclusion

Sustainability leverage is greatest at the earliest stages of materials design, when choices about composition and process remain flexible and consequential. This Perspective proposes an epistemic, bottom-up framework for integrating LCT into early-stage materials discovery, enabling results to inform design decisions before impacts are locked in. Uncertainty at low TRLs is not a barrier to action, but rather a source of insight to bound outcomes, identify dominant drivers, and guide experiments. Early-stage LCT places agency above precision—using incomplete but structured information to shape materials innovation before trajectories become fixed.

Rather than prescribing specific tools or automated workflows, we intend this framework as a conceptual roadmap to connect fragmented communities and emerging workflows—including synthesis prediction, process modeling, and parametric inventory construction—to enable LCT from the point of materials selection and synthesis design onward. Complementary early-stage integrative approaches in green chemistry,[27, 108, 109] energy technologies (e.g., batteries[110]), and environmental justice (e.g., JUST-R[111, 112, 113]) point to broader efforts toward ethical science guided by the precautionary principle.[114]

Although our focus has been primarily environmental impacts through LCT and LCA, the modular structure of the framework could support additional forms of evaluation, including social LCA, TEA, or sustainable-by-design approaches. More broadly, the principles outlined here should extend across materials systems and research workflows. Realizing this vision will require closer coordination across materials science, sustainability analysis, process engineering, and decision science to align methods, share data, and develop interoperable tools—so that LCT informs materials innovation from the outset rather than through downstream correction.

Acknowledgments

The authors thank Celeste Melamed, Evan Spotte-Smith, Lizzie Mahoney, Michael Machala, and Taylor Ueckert for insightful discussions and constructive feedback during the preparation of this manuscript. R.W.R. was supported by a Distinguished Postdoctoral Fellowship at the University of Washington’s Clean Energy Institute. This work was supported by funding from Toyota Research Institute.

References

  1. [1]Li, M. & Lu, J. Cobalt in lithium-ion batteries. Science 367, 979–980 (2020).
  2. [2]IEA. Global Critical Minerals Outlook 2025 en. Tech. rep. (International Energy Agency (IEA), 2025).
  3. [3]ISO. ISO 14040: Environmental Management - Life Cycle Assessment - Principles and Framework en. International Standard. 2006.
  4. [4]ISO. ISO 14044: Environmental Management-Life Cycle Assessment-Requirements and Guidelines en. International Standard. 2006.
  5. [5]Arvidsson, R. et al. Environmental Assessment of Emerging Technologies: Recommendations for Prospective LCA. en. Journal of Industrial Ecology 22, 1286–1294. ISSN: 1530-9290 (2018).DOI
  6. [6]Otyepka, M., Pykal, M. & Otyepka, M. Advancing materials discovery through artificial intelligence. en. Applied Materials Today 47, 102981. ISSN: 23529407 (2025).
  7. [7]Tom, G. et al. Self-Driving Laboratories for Chemistry and Materials Science. en. Chemical Reviews 124, 9633–9732. ISSN: 0009-2665, 1520-6890 (2024).DOI
  8. [8]Tobias, A. V. & Wahab, A. Autonomous ‘self-driving’ laboratories: a review of technology and policy implications. en. Royal Society Open Science 12, 250646. ISSN: 2054-5703 (2025).DOI
  9. [9]Mikolajczyk, A. et al. Retrosynthesis from transforms to predictive sustainable chemistry and nanotechnology: a brief tutorial review. en. Green Chemistry 25, 2971–2991. ISSN: 1463-9270 (2023).DOI
  10. [10]Blanco, C., Pauliks, N., Donati, F., Engberg, N. & Weber, J. Machine learning to support prospective life cycle assessment of emerging chemical technologies. en. Current Opinion in Green and Sustainable Chemistry 50, 100979. ISSN: 24522236 (2024).DOI
  11. [11]Chen, S. et al. Life cycle assessment for all organic chemicals 2026.
  12. [12]Szczypiński, F. T., Bennett, S. & Jelfs, K. E. Can we predict materials that can be synthesised? en. Chemical Science 12, 830–840. ISSN: 2041-6520, 2041-6539 (2021).DOI
  13. [13]Kovnir, K. Predictive Syntheses. en. Chemistry of Materials 33, 4835–4841. ISSN: 0897-4756, 1520-5002 (2021).
  14. [14]Aziz, A. & Carrasco, J. Towards Predictive Synthesis of Inorganic Materials Using Network Science. en. Frontiers in Chemistry 9, 798838. ISSN: 2296-2646 (2021).DOI
  15. [15]Leeman, J. et al. Challenges in High-Throughput Inorganic Materials Prediction and Autonomous Synthesis. en. PRX Energy 3, 011002. ISSN: 2768-5608 (2024).DOI
  16. [16]Aykol, M. et al. Network analysis of synthesizable materials discovery. en. Nature Communications 10, 2018. ISSN: 2041-1723 (2019).
  17. [17]Aykol, M., Montoya, J. H. & Hummelshøj, J. Rational Solid-State Synthesis Routes for Inorganic Materials. en. Journal of the American Chemical Society 143, 9244–9259. ISSN: 0002-7863, 1520-5126 (2021).DOI
  18. [18]McDermott, M. J., Dawkranath, S. S. & Persson, K. A. A graph-based network for predicting chemical reaction pathways in solid-state materials synthesis. en. Nature Communications 12, 3097. ISSN: 2041-1723 (2021).DOI
  19. [19]Gallant, M. C., McDermott, M. J., Li, B. & Persson, K. A. ReactCA: A Cellular Automaton for Predicting Phase Evolution in Solid-State Reactions. en. 2024.
  20. [20]Malik, S. A., Goodall, R. E. A. & Lee, A. A. Predicting the Outcomes of Material Syntheses with Deep Learning. en. Chemistry of Materials 33, 616–624. ISSN: 0897-4756, 1520-5002 (2021).DOI
  21. [21]Huo, H. et al. Machine-Learning Rationalization and Prediction of Solid-State Synthesis Conditions. en. Chemistry of Materials 34, 7323–7336. ISSN: 0897-4756, 1520-5002 (2022).DOI
  22. [22]Szymanski, N. J., Nevatia, P., Bartel, C. J., Zeng, Y. & Ceder, G. Autonomous and dynamic precursor selection for solid-state materials synthesis. en. Nature Communications 14, 6956. ISSN: 2041-1723 (2023).DOI
  23. [23]Szymanski, N. J. et al. An autonomous laboratory for the accelerated synthesis of novel materials. en. Nature 624, 86–91. ISSN: 0028-0836, 1476-4687 (2023).DOI
  24. [24]Williamson, E. M. & Brutchey, R. L. Using Data-Driven Learning to Predict and Control the Outcomes of Inorganic Materials Synthesis. Inorganic Chemistry 62, 16251–16262. ISSN: 0020-1669 (2023).DOI
  25. [25]Kim, S., Noh, J., Gu, G. H., Chen, S. & Jung, Y. Predicting synthesis recipes of inorganic crystal materials using elementwise template formulation. en. Chemical Science 15, 1039–1045. ISSN: 2041-6520, 2041-6539 (2024).DOI
  26. [26]Kim, S., Jung, Y. & Schrier, J. Large Language Models for Inorganic Synthesis Predictions. en. Journal of the American Chemical Society 146, 19654–19659. ISSN: 0002-7863, 1520-5126 (2024).DOI
  27. [27]Chen, Z. et al. Data-driven prediction of solid state reaction pathways in the synthesis of ferrites. en. Journal of Solid State Chemistry 359, 125914. ISSN: 00224596 (2026).DOI
  28. [28]Pan, E. et al. DiffSyn: a generative diffusion approach to materials synthesis planning. en. Nature Computational Science, 1–13. ISSN: 2662-8457 (2026).
  29. [29]Kononova, O. et al. Text-mined dataset of inorganic materials synthesis recipes. en. Scientific Data 6, 203. ISSN: 2052-4463 (2019).DOI
  30. [30]Kim, E. et al. Inorganic Materials Synthesis Planning with Literature-Trained Neural Networks. en. Journal of Chemical Information and Modeling 60, 1194–1201. ISSN: 1549-9596, 1549-960X (2020).
  31. [31]Makino, K., Kuniyoshi, F., Ozawa, J. & Miwa, M. Extracting and analyzing inorganic material synthesis procedures in the literature en. 2021.
  32. [32]Wang, Z. et al. Dataset of solution-based inorganic materials synthesis procedures extracted from the scientific literature. en. Scientific Data 9, 231. ISSN: 2052-4463 (2022).DOI
  33. [33]Chung, V., Walsh, A. & J. Payne, D. Solid-state synthesizability predictions using positive-unlabeled learning from human-curated literature data. en. Digital Discovery 4, 2439–2453. ISSN: 2635-098X (2025).DOI
  34. [34]Wang, Z. et al. ULSA: unified language of synthesis actions for the representation of inorganic synthesis protocols. en. Digital Discovery 1, 313–324. ISSN: 2635-098X (2022).arxiv.org/abs/2201.09329
  35. [35]SEMI. SEMI PV17-1012 (Reapproved 0419): Specification for Polysilicon Materials Used in Photovoltaic Applications. en. Photovoltaic. 2019.
  36. [36]Frischknecht, R. et al. Life Cycle Inventories and Life Cycle Assessments of Photovoltaic Systems. en. Tech. rep. NREL/TP-6A20-73853, 1561526 (2020), NREL/TP–6A20–73853, 1561526.
  37. [37]Parvatker, A. G. & Eckelman, M. J. Simulation-Based Estimates of Life Cycle Inventory Gate-to-Gate Process Energy Use for 151 Organic Chemical Syntheses. en. ACS Sustainable Chemistry & Engineering 8, 8519–8536. ISSN: 2168-0485, 2168-0485 (2020).DOI
  38. [38]Lee, A. et al. The IDAES process modeling framework and model library—Flexibility for process simulation and optimization. en. Journal of Advanced Manufacturing and Processing 3, e10095. ISSN: 2637-403X (2021).DOI
  39. [39]Alizadeh, R., Allen, J. K. & Mistree, F. Managing computational complexity using surrogate models: a critical review. en. Research in Engineering Design 31, 275–298. ISSN: 1435-6066 (2020).DOI
  40. [40]Misener, R. & Biegler, L. Formulating data-driven surrogate models for process optimization. Computers & Chemical Engineering 179, 108411. ISSN: 0098-1354 (2023).
  41. [41]Brumen, B., Černezel, A. & Bošnjak, L. Overview of Machine Learning Process Modelling. en. Entropy 23. ISSN: 1099-4300 (2021).
  42. [42]Schweidtmann, A. M. et al. Machine Learning in Chemical Engineering: A Perspective. en. Chemie Ingenieur Technik 93, 2029–2039. ISSN: 1522-2640 (2021).
  43. [43]Schweidtmann, A. M. Mining Chemical Process Information from Literature for Generative Process Design: A Perspective. en. in (Breckenridge, Colorado, USA, 2024), 84–91.DOI
  44. [44]Medeiros, D. W. d. DWSIM: Open-Source Process Simulator 2025.
  45. [45]Cortes-Peña, Y., Kumar, D., Singh, V. & Guest, J. S. BioSTEAM: A Fast and Flexible Platform for the Design, Simulation, and Techno-Economic Analysis of Biorefineries under Uncertainty. ACS Sustainable Chemistry & Engineering 8, 3302–3310 (2020).DOI
  46. [46]Shields, B. J. et al. Bayesian reaction optimization as a tool for chemical synthesis. en. Nature 590, 89–96. ISSN: 1476-4687 (2021).DOI
  47. [47]Thonemann, N., Schulte, A. & Maga, D. How to Conduct Prospective Life Cycle Assessment for Emerging Technologies? A Systematic Review and Methodological Guidance. en. Sustainability 12, 1192. ISSN: 2071-1050 (2020).DOI
  48. [48]Langkau, S. et al. A stepwise approach for Scenario-based Inventory Modelling for Prospective LCA (SIMPL). en. The International Journal of Life Cycle Assessment 28, 1169–1193. ISSN: 1614-7502 (2023).
  49. [49]Olivetti, E., Patanavanich, S. & Kirchain, R. Exploring the Viability of Probabilistic Under-Specification To Streamline Life Cycle Assessment. Environmental Science & Technology 47, 5208–5216. ISSN: 0013-936X (2013).DOI
  50. [50]Erakca, M., Baumann, M., Helbig, C. & Weil, M. Systematic review of scale-up methods for prospective life cycle assessment of emerging technologies. Journal of Cleaner Production 451, 142161. ISSN: 0959-6526 (2024).
  51. [51]Nurdiawati, A., Mir, B. A. & Al-Ghamdi, S. G. Recent advancements in prospective life cycle assessment: Current practices, trends, and implications for future research. Resources, Environment and Sustainability 20, 100203. ISSN: 2666-9161 (2025).
  52. [52]Hauschild, M. Z. et al. Identifying best existing practice for characterization modeling in life cycle impact assessment. en. The International Journal of Life Cycle Assessment 18, 683–697. ISSN: 1614-7502 (2013).
  53. [53]Cucurachi, S., van der Giesen, C. & Guinée, J. Ex-ante LCA of Emerging Technologies. Procedia CIRP. 25th CIRP Life Cycle Engineering (LCE) Conference, 30 April – 2 May 2018, Copenhagen, Denmark 69, 463–468. ISSN: 2212-8271 (2018).DOI
  54. [54]Cucurachi, S. & Blanco Rocha, C. F. en. in Nanotechnology in Eco-efficient Construction 815–846 (Elsevier, 2019). ISBN: 978-0-08-102641-0.
  55. [55]Wender, B. A. et al. Anticipatory life-cycle assessment for responsible research and innovation. en. Journal of Responsible Innovation 1, 200–207. ISSN: 2329-9460, 2329-9037 (2014).DOI
  56. [56]Blanco, C. F. et al. Assessing the sustainability of emerging technologies: A probabilistic LCA method applied to advanced photovoltaics. en. Journal of Cleaner Production 259, 120968. ISSN: 09596526 (2020).
  57. [57]Prado, V., Seager, T. P. & Guglielmi, G. Challenges and risks when communicating comparative LCA results to management. en. The International Journal of Life Cycle Assessment 27, 1164–1169. ISSN: 1614-7502 (2022).DOI
  58. [58]Mendoza Beltran, A. et al. Quantified Uncertainties in Comparative Life Cycle Assessment: What Can Be Concluded? en. Environmental Science & Technology 52, 2152–2161. ISSN: 0013-936X, 1520-5851 (2018).DOI
  59. [59]Huijbregts, M. A. J. Part I: Application of uncertainty and variability in LCA. en. The International Journal of Life Cycle Assessment 3, 273–280. ISSN: 1614-7502 (1998).DOI
  60. [60]Igos, E., Benetto, E., Meyer, R., Baustert, P. & Othoniel, B. How to treat uncertainties in life cycle assessment studies? en. The International Journal of Life Cycle Assessment 24, 794–807. ISSN: 1614-7502 (2019).
  61. [61]Heijungs, R. Probability, Statistics and Life Cycle Assessment: Guidance for Dealing with Uncertainty and Sensitivity en. ISBN: 978-3-031-49317-1 (Springer Nature, 2024).DOI
  62. [62]Lacirignola, M., Blanc, P., Girard, R., Pérez-López, P. & Blanc, I. LCA of emerging technologies: addressing high uncertainty on inputs’ variability when performing global sensitivity analysis. en. Science of The Total Environment 578, 268–280. ISSN: 00489697 (2017).
  63. [63]Mendoza Beltran, A. et al. When the Background Matters: Using Scenarios from Integrated Assessment Models in Prospective Life Cycle Assessment. en. Journal of Industrial Ecology 24, 64–79. ISSN: 1088-1980, 1530-9290 (2018).
  64. [64]Ravikumar, D., Seager, T. P., Cucurachi, S., Prado, V. & Mutel, C. L. Novel Method of Sensitivity Analysis Improves the Prioritization of Research in Anticipatory Life Cycle Assessment of Emerging Technologies. en. Environmental Science (2018).
  65. [65]Sacchi, R. et al. Prospective Environmental Impact asSEssment (premise): A streamlined approach to producing databases for prospective life cycle assessment using integrated assessment models. en. Renewable and Sustainable Energy Reviews 160, 112311. ISSN: 13640321 (2022).
  66. [66]Douziech, M. et al. Life cycle assessment of prospective trajectories: A parametric approach for tailor-made inventories and its computational implementation. en. Journal of Industrial Ecology, jiec.13432. ISSN: 1088-1980, 1530-9290 (2023).
  67. [67]Jounanais, P., Blanco, C. F. & Pizzol, M. Environmental Success under Uncertainty and Risk (ENSURe): A procedure for probability evaluation in ex-ante LCA. Technological Forecasting and Social Change 201, 123265. ISSN: 0040-1625 (2024).DOI
  68. [68]Woods-Robinson, R. et al. Controversy and consensus: common ground and best practices for life cycle assessment of emerging technologies 2025.
  69. [69]Caduff, M., Huijbregts, M. A., Koehler, A., Althaus, H.-J. & Hellweg, S. Scaling Relationships in Life Cycle Assessment. en. Journal of Industrial Ecology 18, 393–406. ISSN: 1530-9290 (2014).
  70. [70]Piccinno, F., Hischier, R., Seeger, S. & Som, C. From laboratory to industrial scale: a scale-up framework for chemical processes in life cycle assessment studies. en. Journal of Cleaner Production 135, 1085–1097. ISSN: 09596526 (2016).
  71. [71]Weyand, S., Kawajiri, K., Mortan, C. & Schebek, L. Scheme for generating upscaling scenarios of emerging functional materials based energy technologies in prospective LCA (UpFunMatLCA). en. Journal of Industrial Ecology 27, 676–692. ISSN: 1088-1980, 1530-9290 (2023).
  72. [72]Prado, V. et al. Sensitivity to weighting in life cycle impact assessment (LCIA). en. The International Journal of Life Cycle Assessment 25, 2393–2406. ISSN: 1614-7502 (2020).DOI
  73. [73]Wilkinson, M. D. et al. The FAIR Guiding Principles for scientific data management and stewardship. en. Scientific Data 3, 160018. ISSN: 2052-4463 (2016).DOI
  74. [74]Curtarolo, S. et al. AFLOWLIB.ORG: A distributed materials properties repository from high-throughput ab initio calculations. Comput. Mater. Sci. 58, 227–235 (2012).
  75. [75]Jain, A. et al. The Materials Project: A materials genome approach to accelerating materials innovation. APL Materials 1, 011002. ISSN: 2166532X (2013).
  76. [76]Saal, J. E., Kirklin, S., Aykol, M., Meredig, B. & Wolverton, C. Materials design and discovery with high-throughput density functional theory: the open quantum materials database (OQMD). Jom 65, 1501–1509 (2013).
  77. [77]Draxl, C. & Scheffler, M. The NOMAD laboratory: from data sharing to artificial intelligence. en. Journal of Physics: Materials 2, 036001. ISSN: 2515-7639 (2019).DOI
  78. [78]Horton, M. K. et al. Accelerated data-driven materials science with the Materials Project. en. Nature Materials 24, 1522–1532. ISSN: 1476-1122, 1476-4660 (2025).
  79. [79]Linstrom, P. J. & Mallard, W. G. The NIST Chemistry WebBook: A Chemical Data Resource on the Internet. Journal of Chemical & Engineering Data 46, 1059–1063. ISSN: 0021-9568 (2001).
  80. [80]Kim, S. et al. PubChem Substance and Compound databases. Nucleic Acids Research 44, D1202–D1213. ISSN: 0305-1048 (2016).
  81. [81]Kearnes, M. S. et al. The Open Reaction Database. en. Journal of the American Chemical Society 143, 18820–18826. ISSN: 0002-7863, 1520-5126 (2021).
  82. [82]Ong, S. P. et al. Python Materials Genomics (pymatgen): A robust, open-source python library for materials analysis. Comput. Mater. Sci. 68, 314–319. ISSN: 0927-0256 (2013).
  83. [83]Hjorth Larsen, A. et al. The atomic simulation environment—a Python library for working with atoms. en. Journal of Physics: Condensed Matter 29, 273002. ISSN: 0953-8984 (2017).
  84. [84]Bento, A. P. et al. An open source chemical structure curation pipeline using RDKit. en. Journal of Cheminformatics 12, 51. ISSN: 1758-2946 (2020).
  85. [85]Mutel, C. Brightway: An open source framework for Life Cycle Assessment. en. Journal of Open Source Software 2, 236. ISSN: 2475-9066 (2017).
  86. [86]Jolivet, R. et al. lca_algebraic: a library bringing symbolic calculus to LCA for comprehensive sensitivity analysis. en. The International Journal of Life Cycle Assessment 26, 2457–2471. ISSN: 1614-7502 (2021).
  87. [87]National Renewable Energy Laboratory. U.S. Life Cycle Inventory Database LCI database. 2025.
  88. [88]Federal Office for the Environment. Database of the Swiss Federal Administration LCI database.
  89. [89]Karpovich, C., Pan, E., Jensen, Z. & Olivetti, E. Interpretable Machine Learning Enabled Inorganic Reaction Classification and Synthesis Condition Prediction. en. Chemistry of Materials 35, 1062–1079. ISSN: 0897-4756, 1520-5002 (2023).
  90. [90]Wu, Y. et al. How to accelerate the inorganic materials synthesis: from computational guidelines to data-driven method? National Science Review 12, nwafo81. ISSN: 2095-5138 (2025).
  91. [91]Sharma, N. & Liu, Y. A. A hybrid science-guided machine learning approach for modeling chemical processes: A review. en. AIChE Journal 68, e17609. ISSN: 1547-5905 (2022).
  92. [92]Srinivasan, K. et al. Artificial intelligence and machine learning at various stages and scales of process systems engineering. en. The Canadian Journal of Chemical Engineering 103, 1004–1035. ISSN: 1939-019X (2025).
  93. [93]Ghoroghi, A., Rezgui, Y., Petri, I. & Beach, T. Advances in application of machine learning to life cycle assessment: a literature review. en. The International Journal of Life Cycle Assessment 27, 433–456. ISSN: 1614-7502 (2022).
  94. [94]Romeiko, X. X. et al. A review of machine learning applications in life cycle assessment studies. Science of The Total Environment 912, 168969. ISSN: 0048-9697 (2024).
  95. [95]Popowicz, M., Katzer, N. J., Kettele, M., Schöggl, J.-P. & Baumgartner, R. J. Digital technologies for life cycle assessment: a review and integrated combination framework. en. The International Journal of Life Cycle Assessment 30, 405–428. ISSN: 1614-7502 (2025).
  96. [96]Martínez-Ramón, N., Calvo-Rodríguez, F., Iribarren, D. & Dufour, J. Frameworks for the application of machine learning in life cycle assessment for process modeling. en. Cleaner Environmental Systems 14, 100221. ISSN: 26667894 (2024).
  97. [97]Köck, B., Friedl, A., Loaiza, S. S., Wukovits, W. & Mihalyi-Schneider, B. Automatisation of Life Cycle Assessment—A Critical Review of Developments in the Field of Life Cycle Inventory Analysis. en. Sustainability 15. ISSN: 2071-1050 (2023).
  98. [98]Akrami, M., Porter, M. D. & Colosi, L. M. Addressing uncertainty in machine learning-integrated life cycle assessment (ML+LCA). Journal of Environmental Management 389, 126225. ISSN: 0301-4797 (2025).
  99. [99]Holmquist, H. et al. The potential to use QSAR to populate ecotoxicity characterisation factors for simplified LCIA and chemical prioritisation. en. The International Journal of Life Cycle Assessment 23, 208–2216. ISSN: 1614-7502 (2018).
  100. [100]Hou, P., Jolliet, O., Zhu, J. & Xu, M. Estimate ecotoxicity characterization factors for chemicals in life cycle assessment using machine learning models. Environment International 135, 105393. ISSN: 0160-4120 (2020).
  101. [101]Von Borries, K. et al. Potential for Machine Learning to Address Data Gaps in Human Toxicity and Ecotoxicity Characterization. Environmental Science & Technology 57, 18259–18270. ISSN: 0013-936X (2023).
  102. [102]Bromham, L., Dinnage, R. & Hua, X. Interdisciplinary research has consistently lower funding success. en. Nature 534, 684–687. ISSN: 0028-0836, 1476-4687 (2016).
  103. [103]Börner, K. et al. A Multi-Level Systems Perspective for the Science of Team Science. Science translational medicine 2, 49cm24. ISSN: 1946-6234 (2010).
  104. [104]Cravens, A. E., Jones, M. S., Ngai, C., Zarestky, J. & Love, H. B. Science facilitation: navigating the intersection of intellectual and interpersonal expertise in scientific collaboration. en. Humanities and Social Sciences Communications 9, 256. ISSN: 2662-9992 (2022).
  105. [105]Collins, F. S., Morgan, M. & Patrinos, A. The Human Genome Project: Lessons from Large-Scale Biology. Science 300, 286–290 (2003).
  106. [106]Eyring, V. et al. Overview of the Coupled Model Intercomparison Project Phase 6 (CMIP6) experimental design and organization. English. Geoscientific Model Development 9, 1937–1958. ISSN: 1991-959X (2016).
  107. [107]Fichtner, M. et al. Rechargeable Batteries of the Future—The State of the Art from a BATTERY 2030+ Perspective. en. Advanced Energy Materials 12, 2102904. ISSN: 1614-6830 (2022).
  108. [108]Zhu, X., Ho, C.-H. & Wang, X. Application of Life Cycle Assessment and Machine Learning for High-Throughput Screening of Green Chemical Substitutes. ACS Sustainable Chemistry & Engineering 8, 11141–11151 (2020).
  109. [109]Reyes, K. M. D., Bruce, K. & Shetranjawala, S. Green Chemistry, Life Cycle Assessment, and Systems Thinking: An Integrated Comparative-Complementary Chemical Decision-Making Approach. Journal of Chemical Education 100, 209–220. ISSN: 0021-9584 (2023).
  110. [110]Putsche, V. L. et al. A framework for integrating supply chain, environmental, and social justice factors during early stationary battery research. en. Frontiers in Sustainability. Sustainable Technology Management 4 (2023).
  111. [111]Dutta, N. S. et al. JUST-R metrics for considering energy justice in early-stage energy research. en. Joule 7, 431–437. ISSN: 25424351 (2023).
  112. [112]Arkhurst, B. K. et al. Evaluating energy justice metrics in early-stage science and technology research using the JUST-R metrics framework. en. Frontiers in Environmental Science 11. ISSN: 2296-665X (2023).
  113. [113]Dutta, N. S. et al. Applying energy justice metrics to photovoltaic materials research. en. MRS Advances 9, 962–969. ISSN: 2059-8521 (2024).
  114. [114]Kriebel, D. et al. The precautionary principle in environmental science. Environmental Health Perspectives 109, 871–876. ISSN: 0091-6765 (2001).

Paper details

vlnc:W_kcahh8pg
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents