betaFeedback

WorksPhysics and Astronomy

ERLC (Twin LC) and LHC/FCC Based eA Colliders

Abstract

Construction of the ERLC (twin LC) collider tangential to LHC or FCC will give opportunity to realize eA collisions at multi-TeV center-of-mass energies. Luminosity estimations show that values comparable with that of ERL60 based eA colliders are achievable while center of mass energies are essentially higher. Certainly, proposed eA colliders have great potential for clarifying QCD basics and nuclear structure.

Introduction

Recently, V. I. Telnov has proposed ERLC (twin LC) scheme to improve ILC luminosity by two orders [1]. In previous paper we have considered possible use of the ERLC for HL-LHC, HE-LHC and FCC based epep colliders [2]. It was shown that using ERLC is much more advantageous comparing to ERL60, which is considered as baseline option for HL/HE-LHC and FCC based lepton-hadron colliders [3].

In this paper, possible use of the ERLC for HL/HE-LHC and FCC based eAeA colliders have been considered. (for earlier eAeA collider proposals see review [4] and references therein, as well as [5] and [6] for FCC and SppC, respectively) Main parameters of ERLC electron and LHC/FCC lead beams are presented in § 2. In next section we evaluate parameters of corresponding eAeA colliders. In § 4, we briefly discuss physics search potential of these machines. Our conclusion and recommendations are given in § 5.

Parameters of ERLC, LHC and FCC

In this section, we present parameters of ERLC, HL-LHC, HE-LHC and FCC, which are used for estimation of main parameters of eAeA colliders in the following section. Parameters of ERLC and ILC are given in Table 1 (Table 2 of Reference [1]). Table 2 presents parameters of HL-LHC, HE-LHC and FCC lead beams upgraded for ERL60 eAeA colliders (Table 9 in Reference [3]).

Parameter [unit]ERLCILC
Beam Energy [GeV]125125
N per bunch [101010^{10}]0.52.0
Norm. emit., ϵx,n\epsilon_{x,n} [μ\mum]2010
Norm. emit., ϵy,n\epsilon_{y,n} [μ\mum]0.0350.035
βx\beta_x at IP [cm]251.3
βy\beta_y at IP [cm]0.030.04
σx\sigma_x at IP [μ\mum]4.50.73
σy\sigma_y at IP [nm]6.17.7
Rep. rate, ff [Hz]2×1082 \times10^86560
Bunch distance [m]1.5166
Duty cycle1/3n/a

Table 1. Main parameters of ERLC and ILC

Parameter [unit]HL-LHCHE-LHCFCC
EPbE_{\mathrm{Pb}} [PeV]0.5741.03 (1.11)4.1
EeE_e [GeV]606060
seN\sqrt{s_{eN}} [TeV]0.81.12.2
Bunch spacing [ns]5050100
Number of Bunches120012002072
Ions per Bunch [10810^8]1.81.81.8
Norm. emit., ϵA\epsilon_A [μ\mum]1.51.00.9
Electrons per bunch [10910^9]4.676.212.5
Electron current [mA]152020
IP beta function, βA∗\beta_A^* [cm]71015
Hourglass factor HgeomH_{\mathrm{geom}}0.90.90.9
Pinch Factor Hb−bH_{\mathrm{b-b}}1.31.31.3
Bunch filling HcollH_{\mathrm{coll}}0.80.80.8
LeNL_{eN} [103210^{32} cm−2^{-2}s−1^{-1}]71854
seA\sqrt{s_{eA}} [TeV]3.75.19.9
LeAL_{eA} (AloHEP) [103010^{30} cm−2^{-2}s−1^{-1}]2.546.3517.4

Table 2. LHC/FCC lead beam parameters upgraded for ERL60 based eAeA colliders

Last two rows are added by us. Then, energy value of lead beam for HE-LHC option is incorrect, real value is 1.11 PeV instead of 1.03 PeV.

Luminosity of eAeA Colliders

In this section luminosity, disruption and beam-beam tune shift parameters have been calculated using parameters of electron and nucleus beams given in previous section. Several years ago, the software AloHEP has been developed for estimation of main parameters of linac-ring type epep colliders [7, 8]. Recently, AloHEP has been upgraded [9] for all types of colliders (linear, circular and linac-ring) as well as colliding beams (electron, positron, muon, proton and nuclei).

Main parameters of HL-LHC, HE-LHC and FCC based eAeA colliders, calculated by using the AloHEP software and parameters of electron (lead) beam from Table 1 (Table 2), are presented in Table 3. It is seen that luminosity of ERLC based colliders is more than 2 orders higher comparing to luminosity of ILC based ones.

Lead beamee-beamLeAL_{eA} [cm−2^{-2}s−1^{-1}]ξ\xi [10−410^{-4}]DD
HL-LHCILC5.26×10275.26 \times10^{27}5.3×10−25.3 \times10^{-2}0.4
HL-LHCERLC9.03×10299.03 \times10^{29}1.3×10−21.3 \times10^{-2}0.4
HE-LHCILC1.00×10281.00 \times10^{28}8.0×10−28.0 \times10^{-2}0.7
HE-LHCERLC1.70×10301.70 \times10^{30}2.0×10−22.0 \times10^{-2}0.7
FCCILC2.96×10282.96 \times10^{28}8.9×10−28.9 \times10^{-2}2.1
FCCERLC2.31×10302.31 \times10^{30}2.2×10−22.2 \times10^{-2}2.1

Table 3. eAeA collider parameters using nominal parameters from Tables 1 and 2

Bunch distance of LHC/FCC lead beam (bunch spacing 50 ns corresponds to bunch distance 15 m) is 10 times higher than electron beam bunch distance (1.5 m). This means that only 1/10 of electron bunches take part in eAeA collisions. Therefore, one can consider following upgrade of ERLC parameters: 10 times lower repetition rate and 10 times higher number of electrons per bunch. With this upgrade, we have obtained parameters of eAeA collisions presented in Table 4. Let us mention that ξ\xi values should be decreased by an order which can be handled by using of crab-waist scheme in collision region [10].

Parameter [unit]HL-LHCHE-LHCFCC
seA\sqrt{s_{eA}} [TeV]16.923.545.3
LeAL_{eA} [cm−2^{-2}s−1^{-1}]9.04×10309.04 \times10^{30}1.70×10311.70 \times10^{31}2.32×10312.32 \times10^{31}
σx,y\sigma_{x,y} at IP [μ\mum]5.94×10−65.94 \times10^{-6}4.33×10−64.33 \times10^{-6}2.52×10−62.52 \times10^{-6}
Disruption, DD0.40.72.1
Tune Shift, ξ\xi1.3×10−11.3 \times10^{-1}2.0×10−12.0 \times10^{-1}2.2×10−12.2 \times10^{-1}

Table 4. eAeA collider parameters for upgraded ERLC

Finally, luminosity of the ERLC based eAeA colliders can be further improved using dynamic focusing scheme [11]. After all, LeA≈1032cm−2s−1L_{eA} \approx10^{32}\mathrm{cm}^{-2}\mathrm{s}^{-1} seems achievable for all options with reasonable modifications of ERLC and LHC/FCC parameters.

Physics Potential

Energy frontier eAeA colliders are a must to providing precision PDFs for adequate interpretation of LHC/FCC pApA and AAAA experimental data. On the other hand, construction of lepton-nucleus colliders is very important for clarifying QCD basics and nuclear structure. Physics search program of eAeA colliders were widely discussed within LHeC [12] and EIC [13] projects. Several examples are following: physics of non-linear color fields and gluon saturation, particle propagation through matter and transport properties of nuclei, parton fragmentation, production mechanism for quarkonia, confiment mechanism and so on.

Obviously, ERLC is more advantageous than ERL60 for both luminosity and center-of-mass energy aspects. Let us emphasize that ERLC will provide opportunity to increase the electron beam energy by extending the length of linacs. For instance, 1 TeV e+e−e^{+}e^{-} will enhance the seA\sqrt{s_{eA}} by a factor of two, which allows investigation of 4-times smaller values of xx Bjorken (one order smaller xx Bjorken comparing to ERL60 based eAeA colliders).

Conclusion

Certainly, the ERLC [1] opens new horizons for linear e+e−e^{+}e^{-} colliders. It seems that the ERLC may have essentially impact on future linac-ring type lepton-hadron colliders, too. The ERLC and LHC/FCC based lepton-hadron colliders will essentially enlarge physics search potential of the LHC and FCC for both the SM and BSM phenomena.

Keeping in mind potential of proposed colliders for SM and BSM searches, we invite HEP community to start systematic studies of accelerator, detector and physics search aspects of ERLC and LHC/FCC based epep and eAeA colliders.

Acknowledgement

The authors are grateful to U. Kaya and B. B. Oner for useful discussions.

References

  1. [1]V. I. Telnov. “A high-luminosity superconducting twin e⁺e⁻ linear collider with energy recovery”, arXiv:2105.11015.DOI
  2. [2]B. Dagli, B. Ketenoglu, S. Sultansoy, “ERLC (Twin LC) and LHC/FCC Based Electron-Proton Colliders”, e-Print: 2107.04850 [hep-ex]arxiv.org/abs/2107.04850
  3. [3]F. Bordry et al “Machine Parameters and Projected Luminosity Performance of Proposed Future Colliders at CERN”, arXiv:1810.13022.arxiv.org/abs/1810.13022
  4. [4]A. N. Akay, H. Karadeniz and S. Sultansoy, “Review of Linac-Ring Type Collider Proposals”, International Journal of Modern Physics A, vol. 25, no. 25, pp. 4589-4602, 2010. DOI: 10.1142/S0217751X10049165, arXiv:0911.3314 (2009).DOI
  5. [5]Y. C. Acar et al., “Future circular collider based lepton–hadron and photon–hadron colliders: Luminosity and physics”, Nucl. Instrum. Meth. A871 (2017) 47, DOI: 10.1016/j.nima.2017.07.041, e-Print: arXiv:1608.02190.DOI
  6. [6]B. Ketenoglu, “Main parameters of SppC-based “linac-ring eA” and “ring-ring μA” colliders” Can. J. Phys. 99 (2021) 259–262.DOI
  7. [7]http://yef.etu.edu.tr/ALOHEP_eng.html
  8. [8]https://alohep.hepforge.org
  9. [9]B. B. Oner, B. Dagli, S. Sultansoy and B. Ketenoglu, “Beam-Beam Simulations for Lepton-Hadron Colliders: ALO-HEP Software”, International Particle Accelerator Conference (IPAC21) Proceedings, WEPAB278, Campinas, SP, Brazil, 2021.DOI
  10. [10]S. Verdú-Andrés, S. Belomestnykh, I. Ben-Zvi, R. Calaga, Q. Wu, and B. Xiao, “Crab cavities for colliders: Past, present and future,” Nuclear and Particle Physics Proceedings, vol. 273-275, pp. 193–197, 2016.
  11. [11]R. Brinkmann and M. Dohlus. “A Method to overcome the bunch length limitations on Beta(p)* for electron-proton colliders”, Report number: DESY-M-95-11.
  12. [12]J. L. Abelleira Fernandez et al., “A Large Hadron Electron Collider at CERN”, Journal of Physics G- Nuclear and Particle Physics 39 (2012) 075001. DOI:10.1088/0954-3899/39/7/075001.
  13. [13]R. Abdul Khalek et al., “Science Requirements and Detector Concepts for the Electron-Ion Collider: EIC Yellow Report”, e-Print: 2103.05419 [physics.ins-det]

Paper details

vlnc:W_kke7gn5b
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents