betaFeedback

Reading v1View latest version

WorksEngineering

Reducing 6G Energy Consumption: TDD-Aligned Drain Voltage Modulation for Power Amplifiers

Abstract

The Power Amplifier (PA) of a base station operates inefficiently at partial load, where back-off from the peak output power wastes supply headroom. Adapting the PA drain voltage to the instantaneous signal recovers this loss but requires frequent switching, increasing hardware cost. We propose TDD-Aligned Drain Voltage Modulation (TDD-DVM), a drain voltage modulation scheme that instead selects the drain voltage level once per Time-Division Duplex (TDD) period based on the downlink resource load and switches the voltage during the uplink window. This is enabled by the authors' previous work on POLITE link adaptation, which spreads the transmit power over resources left unused at partial load and moves the PA into a regime where a lower drain voltage suffices. In a 3GPP Urban Macro system-level simulation across traffic loads, we compare TDD-DVM against baseline approaches under conventional and POLITE link adaptation. At equal delivered throughput, TDD-DVM with POLITE keeps the packet failure ratio of the full drain voltage while consuming up to 35% less power than it under conventional link adaptation and up to 7% less than it under POLITE, roughly half of the gain of an idealized reference.

Paper details

vlnc:W_kmdwge85
Published
Fresh — added to the Hub within the last 30 days
Added
License
arXiv nonexclusive license
Usage

views · 9

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Engineering

Not recorded for this paper

View statement
Looking for related papers…