betaFeedback

WorksPhysics and Astronomy

HINSPHERES: Spherically Symmetric Radiative Transfer Modeling of HINSA and the Radial HI-to-H2_2 Transition in Molecular Clouds

Abstract

The transition from atomic hydrogen (HI) to molecular hydrogen (H2_2) is the first step in the evolution from diffuse interstellar gas to dense star-forming cores. HI narrow self-absorption (HINSA), produced by cold atomic gas mixed with molecular material, provides a direct tracer of the HI-to-H2_2 transition in molecular clouds. Existing HINSA analyses typically model HINSA as a single Gaussian component with a uniform spin temperature. This approach cannot recover the radial HI distribution and yields large errors for young cores whose profiles deviate from a Gaussian shape. Here we present hinspheres, an open-source framework that models the core as onion-like spherically symmetric concentric shells, solves radiative transfer along the line of sight and jointly fits the HI abundance, temperature, and kinematic parameters. The framework recovers all parameters with a mean relative error of 4.6-6.8% on our synthetic data with different ages. A combined resolution-noise grid shows that the median recovery error remains below 16% for cores within 1 kpc observed at FAST resolution with noise levels below 0.2 K. Applying it to the dark cores L1574 and L1544, we reveal radial HI abundance profiles that span about three orders of magnitude, which were missed by the single-Gaussian method. The derived chemical ages are 6.5×1066.5\times10^6 and 8.7×1068.7\times10^6 yr, respectively. Compared with the commonly used single-Gaussian method, hinspheres characterizes the radial profile of HINSA structures more accurately, making it well suited to identifying and analyzing young cores undergoing the HI-to-H2_2 transition.

Introduction

The conversion of atomic hydrogen (HI) to molecular hydrogen (H2_2) is the first step of the evolution from diffuse interstellar gas to dense star-forming cores [1, 35]. In the standard picture, a diffuse atomic cloud contracts and shields itself from the interstellar radiation field. Once self-shielding is sufficient, H2_2 forms on grain surfaces and the cloud transitions from atomic to molecular [14, 8]. The timescale and spatial structure of this HI-to-H2_2 transition remain poorly constrained observationally [1, 11], yet they set the initial conditions for all subsequent star formation.

Tracing this conversion is difficult: H2_2 lacks a permanent electric dipole moment, and its first rotational level lies far above the typical kinetic energy of particles in the cold gas. Carbon monoxide, the standard surrogate tracer, has its own limitations: in the dense, well-shielded interior CO freezes onto dust grains [4], while in the translucent outer layers CO photodissociation creates large volumes of “CO-dark” molecular gas [3, 40]. HI narrow self-absorption (HINSA) usually shows up as a narrow absorption dip on the Email: [email protected] broader 21 cm HI emission line. It is produced by cold (T≲20T \lesssim20 K) atomic gas mixed with molecular material absorbing the warmer background HI emission (D. Li & P. F. Goldsmith 2003). Note that whether this cold gas layer shows absorption, emission, or no detectable feature at all is not an intrinsic property of the gas itself but a radiative-transfer effect set by the contrast between its spin temperature and the background brightness, together with the line opacity [35] (D. Li & P. F. Goldsmith 2003). Because the cold HI producing HINSA is physically co-spatial with the molecular gas in which it is embedded, HINSA is a direct tracer of the HI-to-H2_2 transition.

HINSA is commonly detected in cold dark clouds and is frequently associated with molecular tracers such as CO, OH, and HC3_3N. D. Li & P. F. Goldsmith (2003) detected HINSA in 77% of surveyed dark cores in the Taurus/Perseus region and showed that HINSA correlates with the accompanying OH and 13^{13}CO emission in position, velocity, and non-thermal line width. M. Krčo & P. F. Goldsmith (2010) detected HINSA in 40 dark clouds within 700 pc and measured a mean projected HI abundance fHI,2Df_{\mathrm{HI},2\mathrm{D}} of 10−2.810^{-2.8}, confirming that cold HI is typically the third most abundant component in molecular clouds. A pilot HI survey of 17 Planck Galactic cold clumps using FAST detected HINSA in 58% of the clumps [34], and a subsequent FAST survey guided by HC3_3N emission achieved HINSA detection rates of 92% overall and 87% among clumps with HC3_3N detections [24]. HINSA has also been found toward the dense “bones” filaments of the inner Galaxy [32] as well as in CO-dark molecular gas in the outer Galactic disk [25].

The radial distribution of the HI abundance fHI(r)f_{\mathrm{HI}}(r) is central to understanding the chemical evolution of molecular clouds. Time-dependent models of H2_2 formation on grains show that the dense inner regions approach reaction equilibrium faster than the diffuse outer envelope, so that at late times the HI abundance rises toward the cloud edge, from ∼10−4\sim10^{-4} in well-shielded cores to a much higher value at the warm boundary [11]. Direct evidence for such radial structure was obtained by P. Zuo et al. [43], who combined HINSA with CO, dust, and extinction measurements toward the isolated core B227. They revealed a ring of enhanced HI abundance, measured the projected HI abundance varying from 2% to 0.2% within the core, and derived a cloud formation timescale of ∼6×106\sim6 \times10^6 yr. The predicted radial variation implies that, during the HI-to-H2_2 transition, the high-density core converts faster than the envelope and reaches a lower HI abundance at the center. At equilibrium, the equilibrium HI abundance decreases with increasing density [10], so the densest central region also attains the lowest HI abundance.

HINSA is typically treated as a single absorbing component with uniform spin temperature. In the three-component framework of D. Li & P. F. Goldsmith (2003), the observed HI brightness temperature is understood as the line-of-sight result of background, cold, and foreground HI layers, with the cold cloud in the middle producing the HINSA feature. The foreground correction is estimated from a simplified model of the Galactic HI distribution and the cloud distance, while the background emission is reconstructed by fitting polynomials around the absorption feature to isolate the HINSA component. The HINSA profile is then fitted with a single Gaussian to obtain the optical depth and column density. M. Krčo et al. (2008) adopt a forward-fitting approach with a second-order derivative optimization, modeling the line-of-sight as a background component and a single cold-cloud component with a Gaussian HINSA profile. The optical depth is obtained through iterative fitting. In both approaches, a single absorption profile cannot by itself separate the opacity from the temperature, so the spin temperature must be assumed (typically 10 K). Subsequent HINSA studies have largely followed one of these two frameworks. Studies based on D. Li & P. F. Goldsmith (2003) have experimented with higher-order polynomial backgrounds and multi-Gaussian decompositions [34, 23, 22], while studies based on M. Krčo et al. (2008) have refined the forward-fitting approach [24, 25] (M. Krčo & P. F. Goldsmith 2010). Both approaches assume that the HINSA profile is single-component Gaussian and cannot invert observed spectra to recover the underlying radial HI distribution. This is especially problematic for cores undergoing the HI-to-H2_2 transition, whose HINSA profiles are expected to deviate from Gaussian and which are key objects for studying the atomic-to-molecular conversion.

In this paper, we present hinspheres, a Python framework that fills this gap. The framework models spherically symmetric clouds with parametric density and temperature profiles and a discrete radial HI abundance distribution, performing layer-by-layer radiative transfer along every line of sight through a three-dimensional data cube. By fitting all lines of sight simultaneously, hinspheres constrains the full radial HI abundance distribution, as well as the spin temperature and opacity. Compared with the single-Gaussian method, which returns only one column-density value per line of sight and no radial information, hinspheres characterizes the radial profile of HINSA structures more accurately, making it well suited to identifying and analyzing young cores undergoing the HI-to-H2_2 transition.

The paper is organized as follows. § 2 describes the physical model and radiative transfer calculation. § 3 presents the data preparation and fitting algorithm, and discusses the fundamental parameter degeneracies. § 4 validates the pipeline on synthetic data. § 5 demonstrates an application to observational data. § 6 examines the non-Gaussianity of HINSA absorption profiles, compares the hinspheres three-dimensional fitting approach with the conventional single-Gaussian method, and discusses the applicability and limitations of the framework. § 7 summarizes the results.

Physical Model and Radiative Transfer

The hinspheres model represents a spherically symmetric cloud as NN concentric shells spanning the outer radius RoutR_{\rm out} (Figure 1). Shell kk (k=1,…,Nk = 1,\ldots,N) occupies the radial interval rk−1≤r<rkr_{k-1} \le r < r_k with r0=0r_0 = 0 and outer boundaries rk=kRout/Nr_k = kR_{\rm out}/N. Physical quantities are evaluated at the shell midpoints and taken as constant across each shell.

Figure 1. Profiles and NHN_{\mathrm{H}} map of our synthetic core in § 4.1. (a) Density profile for the synthetic core. (b) Temperature profile. (c) NHN_{\mathrm{H}} map generated from the density profile, convolved to a Planck-like resolution of 5′5' with a pixel scale of 1.72′1.72'. Gaussian noise of ∼4×1020 cm−2 pixel−1\sim4 \times10^{20}\ \mathrm{cm}^{-2}\ \mathrm{pixel}^{-1} is added to mimic the Planck τ353\tau_{353} uncertainty. (d) HI abundance fHIf_{\mathrm{HI}} profiles at four chemical ages calculated from the time-dependent model of P. F. Goldsmith et al. [11].

For a line of sight at impact parameter bb from the cloud center, the path length through shell kk is

δlk(b)=rk2−b2−rk−12−b2,(1)\delta l_k(b) = \sqrt{r_k^2-b^2}-\sqrt{r_{k-1}^2-b^2}, \tag*{(1)}

where the second square-root term is set to zero if b≥rk−1b \ge r_{k-1}. Each intersected shell is traversed twice (back and front hemispheres), including at the cloud center (b=0b = 0), where the line of sight pierces the full cloud diameter.

We adopt a generalized Plummer profile for the density structure, a form that has been widely used in core modeling ([33, 26, 41]) because it captures the flat central region and power-law outer envelope characteristic of both Bonnor–Ebert spheres (α≈2.4\alpha\approx2.4) and collapsing power-law profiles (smaller r0r_0):

nH(r)=n01+(r/r0)α,(2)n_{\rm H}(r) = \frac{n_0}{1+(r/r_0)^\alpha}, \tag*{(2)}

where n0n_0 is the central hydrogen-nucleus number density, r0r_0 is the Plummer core radius, and the index α\alpha governs the outer falloff. Here nH(r)n_{\rm H}(r) is the total hydrogen-nucleus number density, defined as nH(r)=nHI(r)+2nH2(r)n_{\rm H}(r) = n_{\rm HI}(r) + 2n_{\rm H_2}(r), where nHIn_{\rm HI} is the number density of atomic hydrogen and nH2n_{\rm H_2} is the number density of molecular hydrogen molecules. The factor of 2 accounts for the two hydrogen nuclei per H2_2 molecule. We define the radial HI abundance as

fHI(r)=nHI(r)nH(r)=nHI(r)nHI(r)+2nH2(r).(3)f_{\rm HI}(r) = \frac{n_{\rm HI}(r)}{n_{\rm H}(r)} = \frac{n_{\rm HI}(r)}{n_{\rm HI}(r)+2n_{\rm H_2}(r)}. \tag*{(3)}

In hinspheres, the radial HI abundance fHIf_{\rm HI} is parameterized in discrete form.

The spin temperature follows a Plummer-like profile, which offers the flexibility to describe a wide range of temperature gradients, from centrally heated cores (T0>T1T_0 > T_1) to externally heated shells (T0<T1T_0 < T_1):

T(r)=T1+T0−T11+(r/rT)p,(4)T(r) = T_1 + \frac{T_0-T_1}{1+(r/r_T)^p}, \tag*{(4)}

where T0T_0 is the central temperature, T1T_1 is the ambient temperature, rTr_T is the transition radius, and p=2p = 2 is used by default. Throughout this paper, TT in temperature profiles denotes the HI spin temperature, defined by the ratio of the hyperfine level populations. The spin temperature TT and the kinetic temperature TkinT_{\rm kin} have T=TkinT = T_{\rm kin} under the assumption of local thermodynamic equilibrium (LTE).

The model includes both infall and rotational velocity fields. The free-fall velocity at radius rr is

vff(r)=2GM(r)r,(5)v_{\rm ff}(r) = \sqrt{\frac{2GM(r)}{r}}, \tag*{(5)}

where M(r)M(r) is the enclosed mass within radius rr:

M(r)=∫0r4πr′2nH(r′) μHmH dr′,(6)M(r) = \int_0^r 4\pi r^{\prime2} n_{\rm H}(r^\prime)\,\mu_{\rm H}m_{\rm H}\,dr^\prime, \tag*{(6)}

with μH=1.40\mu_{\rm H} = 1.40 the mean gas mass per H nucleus ([27]). The actual infall velocity is vinf(r)=fffvff(r)v_{\rm inf}(r) = f_{\rm ff}v_{\rm ff}(r), where ffff_{\rm ff} is a free parameter (0≤fff≤10 \le f_{\rm ff} \le1). For a line of sight at impact parameter bb, the radial infall velocity is projected onto the line of sight:

vlos(b,z)=vinf(r)⋅zr,(7)v_{\rm los}(b,z) = v_{\rm inf}(r)\cdot\frac{z}{r}, \tag*{(7)}

where r=b2+z2r = \sqrt{b^2+z^2} and zz is the depth along the line of sight (z>0z > 0 toward the observer). Rigid-body rotation at angular velocity Ω=vrot/Rout\Omega= v_{\rm rot}/R_{\rm out} is included as an additional velocity component:

vrot,los=Ω(−sin⁡(PA) y−cos⁡(PA) x),(8)v_{\rm rot,los} = \Omega\left(-\sin({\rm PA})\,y-\cos({\rm PA})\,x\right), \tag*{(8)}

where PA (position angle) is the orientation of the rotation axis on the sky.

The peak line-center optical depth of a layer with HI column density NHI=nHI⋅δlN_{\rm HI} = n_{\rm HI}\cdot\delta l, spin temperature TT, and velocity dispersion σv\sigma_v is

τ0=3hc3A1032πkBν212nHI⋅δlTσv2π.(9)\tau_0 = \frac{3hc^3A_{10}}{32\pi k_{\rm B}\nu_{21}^2}\frac{n_{\rm HI}\cdot\delta l}{T\sigma_v\sqrt{2\pi}}. \tag*{(9)}

where A10=2.884×10−15 s−1A_{10} = 2.884 \times10^{-15}\ \mathrm{s}^{-1} is the Einstein spontaneous transition probability for the 21 cm transition [12], ν21=1.420 GHz\nu_{21} = 1.420\ \mathrm{GHz} is the line frequency, and the column density is in cm−2\mathrm{cm}^{-2} and σv\sigma_v in cm/s. The local velocity distribution is assumed to be Gaussian:

τ(v)=τ0exp⁡(−(v−vc)22σv2),(10)\tau(v) = \tau_0 \exp\left(-\frac{(v-v_c)^2}{2\sigma_v^2}\right), \tag*{(10)}

where vcv_c is the layer’s center-of-mass velocity projected onto the line of sight. The total local velocity dispersion is the quadrature sum of thermal and turbulent contributions:

σv=σth2+σturb2,(11)\sigma_v = \sqrt{\sigma_{\mathrm{th}}^2+\sigma_{\mathrm{turb}}^2}, \tag*{(11)}

where σth=kBTkin/mH\sigma_{\mathrm{th}} = \sqrt{k_{\mathrm{B}}T_{\mathrm{kin}}/m_{\mathrm{H}}} and σturb\sigma_{\mathrm{turb}} is a free parameter. In the dense, well-shielded interiors of molecular clouds, collisional coupling and Wouthuysen–Field pumping by Lyα\alpha photons drive the HI spin temperature TT close to the gas kinetic temperature TkinT_{\mathrm{kin}} [30] (G. B. Field 1958). In the low-density envelope, spin temperature may differ from TkinT_{\mathrm{kin}}, but the HI column density there is small, so its contribution to the modeled spectrum is limited. Therefore, we adopt the approximation Tkin∼TT_{\mathrm{kin}} \sim T.

We model the observed HI spectrum as background emission transmitted through the layered cloud. The background brightness temperature Tbg(v)T_{\mathrm{bg}}(v) enters the far side of the cloud and is attenuated and re-emitted by each layer in turn. Denoting the brightness temperature after passing through layer ii as T(i)(v)T^{(i)}(v), the radiative transfer is solved iteratively from the far side to the observer:

T(i)(v)=T(i−1)(v)⋅e−τi(v)+Ti⋅(1−e−τi(v)),(12)T^{(i)}(v) = T^{(i-1)}(v) \cdot e^{-\tau_i(v)} + T_i \cdot\left(1-e^{-\tau_i(v)}\right), \tag*{(12)}

with the initial condition T(0)(v)=Tbg(v)T^{(0)}(v) = T_{\mathrm{bg}}(v). The iteration proceeds from the far side of the cloud toward the observer (i=1,2,…,Ni = 1, 2, \ldots, N), so that each layer receives the emergent brightness from all layers behind it. After the last layer the emergent brightness equals the predicted observed spectrum, which is Tobs(v)T_{\mathrm{obs}}(v). The HI absorption spectrum is defined as

ΔT(v)=Tbg(v)−Tobs(v),(13)\Delta T(v) = T_{\mathrm{bg}}(v) - T_{\mathrm{obs}}(v), \tag*{(13)}

where positive values indicate absorption. Because the cloud has a temperature gradient (warm outer layers and a cold interior), the result is not necessarily pure absorption: when the outer layers are warmer than Tbg(v)T_{\mathrm{bg}}(v), they contribute emission that can partially fill in or even reverse the absorption dip [11].

Workflow of hinspheres

Data Preparation

The radiative-transfer fitting loop in hinspheres requires two observed data cubes as inputs: the HI brightness-temperature cube Tobs(v)T_{\mathrm{obs}}(v) and the background HI emission cube Tbg(v)T_{\mathrm{bg}}(v). The user may supply both cubes directly (e.g. from an independent background extraction), or provide only the observed data cube and use the built-in tool of hinspheres to extract the background.

In the built-in background extraction tool, the background is estimated pixel-by-pixel by fitting a high-order polynomial (default order 5) to the line wings outside the HINSA velocity range. The velocity mask that defines the absorption region is selected interactively by the user: a single pair of velocity bounds may be chosen for the entire data cube, or, for clouds with more complex kinematics, the user may pick multiple anchor positions on a 2D map and the program automatically interpolates smooth per-pixel mask boundaries by distance weighting. In addition, the user may mark extra velocity ranges to mask out other complex HI structures along the line of sight (e.g. unrelated HINSA components on the Galactic plane). Channels falling inside the HINSA mask, together with any additional excluded spectral ranges, are omitted when performing the polynomial fit. The resulting background estimate Tbg(v)T_{\mathrm{bg}}(v) is saved as a FITS file for use by the fitting pipeline.

Fitting Algorithm

In hinspheres, the fitting process uses the background HI emission cube as a reference. It iteratively adjusts the parameters of the spherical cloud to generate simulated data cubes, which are then fitted against the observed data cube. The fitting pipeline jointly determines the cloud structure, kinematics, and HI abundance profile by minimizing the discrepancy between the model and the observed data cube. All physical parameters are normalized to [0,1][0,1] before optimization. This ensures that all parameters contribute equally regardless of their physical scales, which span several orders of magnitude.

In a 2D projected map of a spherically symmetric cloud, the pixels in an annulus at impact parameter bb occupy an area proportional to b dbb\,\mathrm{d}b, so equal-per-pixel weighting would result in the outer annuli dominating the cost function. We instead apply a radial weight w(b)=1/bw(b)=1/b to the squared residuals, normalized by the total weight so that the cost is independent of map size:

S2=∑iw(bi) ϵi2∑iw(bi)(14)S^2 = \frac{\sum_i w(b_i)\,\epsilon_i^2}{\sum_i w(b_i)} \tag*{(14)}

where ϵi\epsilon_i is the residual at pixel ii (model minus observation in brightness temperature). This gives every radial annulus approximately equal statistical weight. The central pixel is assigned the weight of the innermost pixel (impact parameter set to one pixel). In hinspheres we minimize χ2=S2/σ2\chi^2=S^2/\sigma^2, where σ\sigma is the noise level of the data. The weighted residual and χ2\chi^2 are computed within r≤Routr\le R_{\mathrm{out}}.

The HI abundance profile supports two encoding modes. In direct mode, each shell has an independent fHIf_{\mathrm{HI}} value, yielding NshellsN_{\mathrm{shells}} free parameters. In parametric mode, the profile is unimodal: the abundance peaks at a shell with value fHI,peakf_{\mathrm{HI,peak}} and decreases monotonically via multiplicative factors (≤1\le1, one factor per shell boundary, Nshells−1N_{\mathrm{shells}}-1 factors in total) on both sides of the peak. This peaked structure is physically motivated: in molecular clouds, far-UV radiation photodissociates H2\mathrm{H}_2 into HI at the cloud surface, while the interior is shielded and dominated by H2\mathrm{H}_2, producing a radial HI abundance profile that naturally peaks between the fully dissociated surface and the fully molecular core. The parametric mode yields NshellsN_{\mathrm{shells}} continuous abundance parameters (fHI,peakf_{\mathrm{HI,peak}} plus the Nshells−1N_{\mathrm{shells}}-1 multipliers) and a discrete peak-shell index, trading a modest increase in parameters for a physically regular profile. The algorithm performs an exhaustive grid scan, each candidate peak shell triggers an independent optimization over the continuous parameters, and the overall best solution is selected. Global optimization is performed with the Covariance Matrix Adaptation Evolution Strategy (CMA-ES) ([13]), a derivative-free method well suited to non-convex landscapes with multiple local minima. Convergence is assessed from the step size and function-value tolerance.

Parameter Degeneracies

To illustrate the inherent parameter degeneracies of the spherical HINSA model, we run Markov chain Monte Carlo (MCMC) on a synthetic 5×1065\times10^6 yr core whose density, temperature, and kinematic parameters are listed in Table 1. To minimize the impact of spatial smearing on the degeneracy geometry, we use a beam size of 1.0 arcmin and a pixel scale of 0.5 arcmin. The velocity resolution is 0.2 km/s. Gaussian noise with a root-mean-square (RMS) of σ=0.17\sigma=0.17 K per channel (the noise level of the CRAFTS survey, [5]) is added to the data.

CategoryParameterValue
*Densityn0n_0 (cm−3^{-3})1.6×1041.6 \times10^4
r0r_0 (pc)0.146
α\alpha2.0
*TemperatureT0T_0 (K)10.0
T1T_1 (K)58.0
rTr_T (pc)0.73
*OthersRoutR_{\mathrm{out}} (pc)1.46
NshellsN_{\mathrm{shells}}7
*Kinematicsσturb\sigma_{\mathrm{turb}} (km/s)0.2
ffff_{\mathrm{ff}}0.1
vrotv_{\mathrm{rot}} (km/s)0.2
PA (deg)45.0
*ObservationDistance (pc)300
Beam (arcmin)3.0
Pixel scale (arcmin)1.5
Velocity resolution (km/s)0.2
Angular radius of RoutR_{\mathrm{out}} † (arcmin)16.7
Angular radius of r0r_0 † (arcmin)1.67
*Agestt (yr)10510^5, 5×1065 \times10^6, 10710^7, 5×1085 \times10^8

Table 1. Physical and observational parameters of the synthetic cores.

We fix the density to the synthetic input values (n0=16000 cm−3n_0=16000\ \mathrm{cm}^{-3}, r0=0.146 pcr_0=0.146\ \mathrm{pc}, α=2.0\alpha=2.0) and fit the remaining free parameters with MCMC. The resulting corner plot (Figure 2) uses 48 walkers and 10410^4 iterations, discarding a burn-in of roughly 1700 steps per walker. The Gelman–Rubin statistic satisfies R^∈[1.02,1.04]\hat{R}\in[1.02,1.04] for all free parameters. We use a seven-shell model in the fitting. For clarity, only the HI abundances of shells 1, 4, and 7 are shown. The three temperature parame† Angular radii are computed as θ=R/d\theta= R/d at the adopted distance of 300 pc.

Figure 2. Corner plot for the 5 × 10^6 yr synthetic core. During the MCMC fitting, the density parameters are fixed to their true value. For clarity, only layers 1, 4, and 7 of the seven-layer HI abundance are shown.

T0T_0, T1T_1, rTr_T are positively correlated. A higher T0T_0 or T1T_1 can be compensated by a larger rTr_T to produce a similar overall temperature structure. Some fHIf_{\mathrm{HI}} parameters also correlate with temperature, for example fHI,1f_{\mathrm{HI},1} is positively correlated with T0T_0 and fHI,7f_{\mathrm{HI},7} is positively correlated with T1T_1. It is because a joint change in temperature and HI density can maintain the same optical depth. Apart from the correlations mentioned above, most free parameters exhibit near-circular contours in the joint probability distributions, suggesting no strong degeneracy among them.

Validation on Synthetic Data

Synthetic cores and their fitting results

To validate our fitting framework, we generate 7-shell synthetic cores as in Table 1 and fit them with hinspheres. The density, temperature, and HI abundance profiles of these cores are shown in Figure 1. The four cores share the same density, temperature, and kinematic parameters. The central density n0n_0 and the total radius RoutR_{\mathrm{out}} are adopted from Model 1 of P. F. Goldsmith et al. [11], while the ambient temperature T1=58T_1 = 58 K follows the interstellar radiation field (ISRF) model of J. Le Bourlot et al. [19]. The four cores have different ages, and their HI abundance follows the time-dependent chemical model of P. F. Goldsmith & D. Li [10]:

fHI(r,t)=1−2k′nH(r)2k′nH(r)+ζH2[1−exp⁡(−tτ(r))](15)f_{\mathrm{HI}}(r,t) = 1 - \frac{2k'n_{\mathrm{H}}(r)}{2k'n_{\mathrm{H}}(r) + \zeta_{\mathrm{H}_2}} \left[1 - \exp\left(-\frac{t}{\tau(r)}\right)\right] \tag*{(15)}

where k′=1.2×10−17k' = 1.2 \times10^{-17} cm3^3 s−1^{-1} is the H2_2 formation rate coefficient on grains, ζH2=5.2×10−17\zeta_{\mathrm{H}_2} = 5.2 \times10^{-17} s−1^{-1} is the cosmic-ray H2_2 dissociation rate (F. F. S. van der Tak & E. F. van Dishoeck 2000), and τ(r)=1/[2k′nH(r)+ζH2]\tau(r) = 1/[2k'n_{\mathrm{H}}(r) + \zeta_{\mathrm{H}_2}] is the local HI-to-H2_2 conversion timescale. Panel (d) of Figure 1 shows the resulting fHI(r)f_{\mathrm{HI}}(r) for four ages, produced by the four evolutionary stages summarized in Table 1.

We adopt an angular resolution of 3′ and a velocity resolution of 0.2 km/s, approximately matching the FAST beam and the CRAFTS survey channels [5] (D. Li et al. 2018). At the adopted distance of 300 pc, the Plummer core radius r0=0.146r_0 = 0.146 pc subtends 1.7′, marginally resolved by the 3′ beam. To mimic realistic observing conditions, we do not use a uniform constant background. Instead, the synthetic HI background is taken from an off-position spectrum in the L1574 region [43], re-gridded to the same spatial and velocity grid. This single fixed background spectrum is used for all four evolutionary ages. A CRAFTS level of noise (σn=0.17\sigma_n = 0.17 K RMS per 0.2 km/s channel, [5] is added to the synthetic cores. Figure 3 shows the spatial and spectral structure of the synthetic cores. The synthetic HI spectra vary strongly with age. At the youngest stage (10510^{5} yr) the HI abundance is high throughout the core, producing a deep absorption line whose central optical depth is strongly saturated, and the projected infall velocity gradient along the line of sight gives the profile a double-peaked, non-Gaussian shape. At 5×1065 \times10^{6} yr the absorption remains non-Gaussian but weaker, and by 10710^{7} and 5×1085 \times10^{8} yr the declining HI abundance brings the line shape close to a single Gaussian at the CRAFTS noise level. As evolution proceeds, the HINSA absorption depth decreases, making the core appear progressively fainter in the averaged absorption map.

Figure 3. HINSA spectra and averaged absorption maps of the four synthetic cores. (a) HINSA spectra at the center (solid) and at the 23Rout\frac{2}{3}R_{\mathrm{out}} on the eastern side (dashed) of the simulated cores. The corresponding HINSA-free background spectra at these two positions are shown as dotted lines. (b) Averaged absorption over ±2\pm2 km/s for each synthetic core. White ‘+’ symbols mark the center and the 23Rout\frac{2}{3}R_{\mathrm{out}} positions.

The degeneracy between nHIn_{\mathrm{HI}} and the HI abundance fHIf_{\mathrm{HI}} arises because the HINSA optical depth only constrains the product nHI⋅δl/Tn_{\mathrm{HI}} \cdot\delta l/T (Equation (9)). An independent measurement of the total hydrogen column density NHN_{\mathrm{H}}, for instance, from dust continuum or extinction data, breaks this degeneracy by fixing the overall density normalization. To more realistically assess the potential errors of hinspheres in practical applications, we construct a synthetic NHN_{\mathrm{H}} map from the true density profile, add Gaussian noise mimicking the Planck 353 GHz thermal dust optical depth τ353\tau_{353} observations ([28]), and then fit the Plummer parameters from the noisy map. The fitted values of n0n_0, r0r_0, and α\alpha are subsequently fixed in the hinspheres fitting. Specifically, the total hydrogen column is NH=τ353/σ353N_{\mathrm{H}} = \tau_{353}/\sigma_{353}, with σ353=6.3×10−27 cm2\sigma_{353} = 6.3 \times10^{-27}\ \mathrm{cm}^{2} being the dust absorption cross-section per H nucleon at 353 GHz for the diffuse ISM ([28], Fig. 21). We generate a synthetic NHN_{\mathrm{H}} map (20 ×\times 20 pixels, 3 ×\times 3 pc) by projecting the Plummer density profile, convolving it to the Planck 5′5' beam, and adding Gaussian noise with per-pixel στ353∼2.5×10−6\sigma_{\tau_{353}} \sim2.5 \times10^{-6}, a typical value for diffuse high-latitude ISM from the Planck modified blackbody fit uncertainty maps ([28]). This corresponds to σNH=στ353/σ353∼4×1020 cm−2\sigma_{N_{\mathrm{H}}} = \sigma_{\tau_{353}}/\sigma_{353} \sim4 \times10^{20}\ \mathrm{cm}^{-2}. The obtained noisy map is shown in panel (c) of Figure 1. As in Table 2, fitting this noisy map recovers all three Plummer parameters within 10% errors. The resulting density parameters are then used as fixed inputs in the subsequent hinspheres fitting.

ParameterInputFitted68% CIError
n0n_0 (104 cm−310^4\ \mathrm{cm}^{-3})1.601.74[1.44, 2.45]+9%
r0r_0 (pc)0.1460.143[0.112, 0.164]−2%
α\alpha2.002.08[2.00, 2.14]+4%

Table 2. Recovery of Plummer density parameters from the synthetic NHN_{\mathrm{H}} map with Planck-like noise.

With the density parameters fixed, we fit the remaining 15 parameters, including three temperature parameters, peak HI abundance fHI,peakf_{\mathrm{HI,peak}}, six abundance multipliers, infall fraction ffff_{\mathrm{ff}}, turbulent velocity σturb\sigma_{\mathrm{turb}}, velocity offset δv\delta v, rotation velocity vrotv_{\mathrm{rot}}, and rotation position angle PA, together with the discrete peak-shell index kpeakk_{\mathrm{peak}} (grid-scanned, see § 3.2). We use 50 candidate solutions per generation and at most 10510^5 generations for the CMA-ES fitting in hinspheres. Recovery errors for the abundance profile are reported as the unweighted mean over the seven shells of the per-shell relative errors, ⟨δfHI⟩=17∑k∣fHI,kfit−fHI,ktrue∣/fHI,ktrue\langle\delta f_{\mathrm{HI}}\rangle= \frac{1}{7}\sum_k \left|f_{\mathrm{HI},k}^{\mathrm{fit}} - f_{\mathrm{HI},k}^{\mathrm{true}}\right|/f_{\mathrm{HI},k}^{\mathrm{true}}. The all-parameter diagnostic ⟨δall⟩\langle\delta_{\mathrm{all}}\rangle extends the same to the mean relative error over the seven shell abundances together with the eight scalar temperature and kinematic parameters (T0T_0, T1T_1, TTT_{\mathrm{T}}, σturb\sigma_{\mathrm{turb}}, δv\delta v, ffff_{\mathrm{ff}}, vrotv_{\mathrm{rot}}, PA).

Table 3 summarizes the fitting results. With the opacity calibration and the beam convolution included self-consistently in the forward model, the abundance profile is recovered without pathological shell errors at any stage. The all-parameter diagnostic ranges over ⟨δall⟩=4.6\langle\delta_{\mathrm{all}}\rangle= 4.6–6.8% across the four stages, lowest for the mid-age stages (4.6% and 4.9% at 5×1065 \times10^6 and 10710^7 yr) and slightly higher for the young (6.8%) and oldest (6.3%) stages. The shell-averaged abundance errors grow with age, ⟨δfHI⟩=4.1%\langle\delta f_{\mathrm{HI}}\rangle= 4.1\% (10510^5 yr) rising to 10.4% (5×1085 \times10^8 yr), with the largest per-shell errors in the outer shells of the older stages (up to ∼18%\sim18\% at 5×1085 \times10^8 yr). For the 10510^5 yr stage the innermost shell is recovered to within 5.4% (fitted 42.4% against the true 44.8%), the largest relative error being 13.6% in shell 3. The temperature parameters are also recovered well. The T0T_0 errors are 38.8%, 7.0%, 7.9%, and 2.6% for the four cores, respectively. τT\tau_{\mathrm{T}} is recovered to within 4% except for the youngest stage (13.3%), which is because of the strong optical-depth saturation in the young core center. T1T_1 is recovered to within 3.4% in all cases. The infall fraction ffff_{\mathrm{ff}}, turbulent velocity σturb\sigma_{\mathrm{turb}}, and rotation parameters are reliably recovered across all stages (≲14%\lesssim14\%). At the three older stages, the best-fit residual is 0.0285, consistent with the RMS of ∼0.17\sim0.17 K of our data. The 10510^5 yr stage shows a higher residual (0.0784, RMS ∼0.28\sim0.28 K). It is the only stage whose residual substantially exceeds the noise level.

StagefHIf_{\mathrm{HI}} (%)1234567Temperature T0T_0 (K)T1T_1 (K)rTr_T (pc)σturb\sigma_{\mathrm{turb}} (km/s)δv\delta v (km/s)ffff_{\mathrm{ff}}vrotv_{\mathrm{rot}} (km/s)PA (°)⟨δfHI⟩\langle\delta f_{\mathrm{HI}}\rangle (%)⟨δall⟩\langle\delta_{\mathrm{all}}\rangle (%)Residual (K²)
10510^5 yrTrue44.8380.5291.5795.4597.1898.0998.6210.0058.000.730.200.000.100.2045.00
Fitted42.3978.9979.0797.0999.8099.90100.006.1256.010.630.230.000.100.2045.084.16.80.0784
5×1065 \times10^6 yrTrue0.020.081.399.9624.1338.2850.1010.0058.000.730.200.000.100.2045.00
Fitted0.020.081.4510.8326.7443.3957.159.3057.710.710.200.000.100.2045.027.94.60.0285
10710^7 yrTrue0.020.080.201.286.1514.9825.4010.0058.000.730.200.000.100.2045.00
Fitted0.020.080.201.406.8117.0729.149.2157.940.720.200.000.110.2045.107.64.90.0285
5×1085 \times10^8 yrTrue0.020.080.190.350.570.841.1710.0058.000.730.200.000.100.2045.00
Fitted0.020.080.200.400.641.001.359.7457.610.700.190.000.110.2045.9010.46.30.0285
L1574Fitted0.030.150.220.2221.79--5.00†5.00^\dagger100.00†100.00^\dagger0.980.54-0.270.00-0.2057.987.2551
L1544Fitted0.000.020.030.030.77--11.5052.850.70†0.70^\dagger0.00-0.100.00-0.2764.732.0356

Table 3. Best-fit parameter recovery with NHN_{\mathrm{H}} density constraint for the synthetic cores, L1574, and L1544.

Combined Resolution–Noise Analysis

To assess how observational conditions affect parameter recovery, we perform a joint two-dimensional sweep over beam size and noise level with the density parameters fixed. We use the 5×1065 \times10^6 yr synthetic core and set n0n_0, r0r_0, and α\alpha to the values derived in § 4.1. All remaining 15 continuous parameters are left free. We sweep seven beam sizes (1′1', 3′3', 6′6', 10′10', 15′15', 20′20', 30′30') and seven noise levels (0.0, 0.05, 0.10, 0.17, 0.30, 0.60, 1.0 K RMS). Since the synthetic cloud is placed at 300 pc, these beam sizes are equivalent to observing the same cloud at distances from 0.1 to 3 kpc with a fixed 3′3' beam. At each beam size, the data are regridded to a pixel scale of half the beam full width at half maximum (FWHM), and the velocity channels are interpolated to 0.2 km/s. Each combination of beam and noise is run with 20 different random seeds, giving 7×7×20=9807 \times7 \times20 = 980 total fits.

Figure 4 shows the median relative error over all 15 fitted parameters across the 20 seeds. In Figure 5, we show the median relative errors separately for the three temperature parameters, the seven HI abundance layers, and the other parameters (collectively referred to as kinematic parameters). Overall, the parameters recovered by hinspheres show relatively low sensitivity to beam size and noise level. For a typical FAST angular resolution and a core with Rout=1.46R_{\mathrm{out}} = 1.46 pc located within 1 kpc, the median error over all 15 parameters remains below 34%. For common HINSA targets with RMS noise below 0.2 K, the median error is expected to be less than 16%. The median relative error exceeds 50% only for beams of 20′20' at noise levels of 0.6 K and above, or at 30′30' nearly independently of the noise level (equivalent to observing the same core at distances beyond 2 kpc with FAST). With the density fixed, the temperature structure is tightly constrained at high resolution: the median error is ∼1%\sim1\% at 1′1' and stays below 8% up to 6′6' and below 13% up to 10′10' at CRAFTS noise, rising to 20–59% at 1515–30′30'. The kinematic parameters are less affected by noise and resolution. They are recovered to 1–2% for beams up to 10′10' at CRAFTS noise, and degrade to 20–39% at 1515–30′30' under 1 K noise. The shell-averaged abundance error ⟨δfHI⟩\langle\delta f_{\mathrm{HI}} \rangle is most influenced by noise and beam sizes. Its median error is 8–9% at the fully resolved 1′1' beam and grows with beam size, reaching 69–136% at 30′30' depending on the noise level. Higher noise causes earlier degradation. At 0.6–1 K the error already reaches 25–30% at 6′6' and rises to 40–136% at 1010–30′30'. Even at 1′1', the error does not drop to zero but saturates at about 8%. This floor stems from the density–abundance degeneracy: because the density profile is fixed to the NHN_{\mathrm{H}}-map derived values (which deviate slightly from the true profile), the fit compensates for the incorrect column by adjusting fHI,peakf_{\mathrm{HI,peak}} and the shell multipliers. This compensation is bounded by the constraints of the fitted spectrum and cannot be fully removed.

Figure 4. Median relative recovery error ⟨δall⟩\langle\delta_{\mathrm{all}} \rangle averaged over all 15 fitted parameters, as a function of beam FWHM and noise RMS. The result is obtained from the 5×1065 \times10^6 yr synthetic core with the density profile fixed to the NHN_{\mathrm{H}}-map derived values. 20 random noise realizations are used in the calculation.

Figure 5. Same as Figure 4 but grouped by parameter family: (a) temperature structure (T0T_0, T1T_1, rTr_T), (b) HI abundance (seven shells), (c) kinematic parameters (σturb\sigma_{\mathrm{turb}}, δv\delta v, ffff_{\mathrm{ff}}, vrotv_{\mathrm{rot}}, PA).

Effects of Density and Temperature Constraints

As discussed in the subsections above, the strong degeneracy between total hydrogen density and HI abundance in the fitting of HI radiative transfer necessitates external constraints on the density. Moreover, the inherent degeneracy between temperature and density suggests that imposing a temperature prior may also improve the fit. In the previous analysis, we broke the density–abundance degeneracy by fixing the density parameters to values derived from the total hydrogen column density map, which successfully stabilized the hinspheres fitting but inevitably introduced systematic

errors. In this subsection, we use the 5×1065 \times10^6 yr synthetic core in Table 1 to systematically investigate how different levels of constraints on the density and temperature parameters affect the hinspheres recovery.

We consider three density constraint schemes: (i) unconstrained; (ii) 1σ1\sigma constrained, where the three density parameters n0n_0, r0r_0, and α\alpha are restricted to the ±1σ\pm1\sigma intervals obtained from the NHN_{\mathrm{H}} map fit; and (iii) fixed, where n0n_0, r0r_0, and α\alpha are set to the best-fit values from the NHN_{\mathrm{H}} map fit (identical to the approach used in the previous subsections). For temperature, we test two configurations: (i) unconstrained; and (ii) fixed T0T_0, with T0T_0 held at its true value of 10 K for the synthetic core. In real observations, such an external constraint on T0T_0 could be provided by independent chemical tracers. For example, by assuming that the excitation temperature of 13CO{}^{13}\mathrm{CO} or C18O{}^{\mathrm{C}18}\mathrm{O} is representative of the core center. We thus evaluate a total of 2×3=62 \times3 = 6 scenarios, each scenario with રસ 10 random seeds of noise realization, and summarize the results in Table 4.

T0T_0 freeT0T_0 fixed to 10 K
Density constraintNone±1σ\pm1\sigmaFixedNone±1σ\pm1\sigmaFixed
n0n_0 error95.8%18.0%9.0%72.0%8.1%9.0%
r0r_0 error409.0%13.4%2.3%96.7%10.7%2.3%
α\alpha error69.2%4.4%4.0%53.9%3.0%4.0%
T0T_0 error16.6%5.4%6.2%———
T1T_1 error0.5%0.2%0.3%0.2%0.1%0.1%
ffff_{\rm ff} error40.6%11.3%3.6%49.5%9.5%3.2%
σturb\sigma_{\rm turb} error0.3%0.3%0.3%0.3%0.3%0.3%
⟨δfHI⟩\langle\delta f_{\rm HI}\rangle182.0%21.9%9.0%66.4%15.7%8.4%
Residual0.02880.02880.02890.02880.02880.0288

Table 4. Recovery errors for the 5×1065 \times10^6 yr core under different density and temperature constraints. Errors are median across 10 random noise realizations. ⟨δfHI⟩\langle\delta f_{\rm HI}\rangle is the unweighted mean of per-shell fHIf_{\rm HI} relative errors.

The strength of the density constraint is the dominant factor governing the recovery of all physical parameters. Without any constraint, the errors on n0n_0, r0r_0, and α\alpha are as large as 96%, 409%, and 69%, respectively, and the fit wanders wildly across the broad priors. Introducing the loose ±1σ\pm1\sigma constraint reduces these errors dramatically to 18%, 13%, and 4.4%, while simultaneously the free-fall coefficient ffff_{\rm ff} drops from 40.6% to 11.3%, and the shell-averaged abundance deviation ⟨δfHI⟩\langle\delta f_{\rm HI}\rangle plummets from 182% to 21.9%. This confirms that even approximate column-density priors effectively break the density–abundance degeneracy. Fixing the density exactly further reduces the abundance deviation from 21.9% to 9.0%.

The temperature constraint provides a secondary but quantifiable improvement, particularly when the density prior is only loose. Fixing T0T_0 to its true value, in the ±1σ\pm1\sigma density-constrained case, reduces the n0n_0 error from 18% to 8.1%, α\alpha from 4.4% to 3.0%, ffff_{\rm ff} from 11.3% to 9.5%, and ⟨δfHI⟩\langle\delta f_{\rm HI}\rangle from 21.9% to 15.7%. When the density is already fixed exactly, the additional improvement from fixing T0T_0 is much smaller (e.g., the abundance deviation only drops from 9.0% to 8.4%), implying that the temperature prior is most valuable when the density prior is not exact. When T0T_0 is left free, it is recovered to within ∼6%\sim6\% as long as the density is constrained (compared to 16.6% without a density constraint), while the outer temperature T1T_1 is recovered to within 0.5% in all cases (and to 0.1–0.2% when T0T_0 is fixed). This shows that the absorption spectrum alone provides substantial constraints on the temperature structure. The residuals remain constant at 0.0288–0.0289 across all scenarios, equal to the square of the 0.17 K RMS noise, confirming that the forward model compensates for an incorrect density by adjusting the abundance profile.

In practical applications of hinspheres, we therefore recommend that users prioritize applying density constraints. Even an approximate column-density prior derived from dust continuum or far-infrared emission (e.g., the ±1σ\pm1\sigma intervals used here) suffices to reduce the recovery errors in density parameters and abundance profiles from several hundred percent to about twenty percent, representing the most critical step in breaking the density–abundance degeneracy. If a reliable independent density estimate is available, fixing the density value is also a viable option. Regarding temperature priors, constraining T0T_0 via excitation temperatures from chemical tracers can provide a secondary improvement when the density constraint is loose.

Effect of Rout Misestimation

The total radius RoutR_{\rm out} of the core can be hard to constrain in observations, yet it affects the radiative-transfer calculation by setting the shell boundaries. To quantify the impact of an incorrect estimate RestR_{\rm est}, we run hinspheres on the 5×1065 \times10^6 yr synthetic core (true Rout=1.46R_{\rm out}=1.46 pc), sampling RestR_{\rm est} from 0.50 Rout0.50\,R_{\rm out} to 1.71 Rout1.71\,R_{\rm out}. The density profile is fixed to the NHN_{\rm H}-map derived values from Section 4.1 (n0=1.74×104 cm−3n_0=1.74 \times10^4\ {\rm cm}^{-3}, r0=0.143r_0=0.143 pc, α=2.08\alpha=2.08). For each trial, we generate 10 independent noise realizations and perform a full CMA-ES optimization.

Table 5 summarizes the median relative errors and 1σ1\sigma spreads across seeds for each trial RestR_{\rm est}. With the correct RestR_{\rm est} (1.46 pc), all parameters recover to within ∼5%\sim5\% of truth, matching the baseline results. Underestimating RestR_{\rm est} by more than ∼18%\sim18\% (≤1.20\leq1.20 pc) raises the residual within the assumed radius from 0.029 to 1.38–5.81 and produces qualitatively incorrect fits: the errors in T0T_0, rTr_T, and ffff_{\rm ff} all exceed 30%. Overestimating by 23–71% (1.80–2.50 pc) yields moderate residuals (0.11–0.27), but the retrieved parameters are also systematically biased, especially T0T_0, which is overestimated by 23–62%.

RestR_{\rm est} (pc)0.731.001.201.461.802.002.50
T0T_0 error133.3% ±\pm 4.4%76.4% ±\pm 39.4%111.1% ±\pm 104.7%4.9% ±\pm 4.8%62.1% ±\pm 16.8%49.5% ±\pm 1.8%23.3% ±\pm 10.1%
T1T_1 error82.8% ±\pm 0.0%33.2% ±\pm 0.0%29.6% ±\pm 0.0%0.8% ±\pm 0.6%4.9% ±\pm 4.6%1.9% ±\pm 0.3%4.6% ±\pm 0.9%
rTr_T error62.3% ±\pm 4.0%98.6% ±\pm 0.0%97.7% ±\pm 2.0%2.1% ±\pm 3.0%23.9% ±\pm 9.3%11.4% ±\pm 0.7%11.9% ±\pm 3.7%
ffff_{\rm ff} error262.1% ±\pm 4.3%128.4% ±\pm 4.5%99.6% ±\pm 2.7%5.3% ±\pm 2.0%2.2% ±\pm 9.7%1.0% ±\pm 1.4%3.0% ±\pm 2.0%
Residual5.8133 ±\pm 0.02142.4612 ±\pm 0.01221.3793 ±\pm 0.00580.0288 ±\pm 0.00060.2713 ±\pm 0.10270.1086 ±\pm 0.00140.1135 ±\pm 0.0013

Table 5. Parameter recovery under RestR_{\rm est} misestimation. Errors are median ±1σ\pm1\sigma across 10 realizations.

Figure 6 compares the recovered temperature (top) and HI abundance (bottom) profiles against the true ones. The true abundance increases from shell 1 (fHI=2×10−4f_{\rm HI}=2 \times10^{-4}) to shell 7 (fHI=0.50f_{\rm HI}=0.50), as expected for a 5×1065 \times10^6 yr core with our Plummer-like density profile. When RestR_{\rm est} is underestimated (≤1.20\leq1.20 pc), the fitter pushes the abundance peak to the outermost available shell, concentrating essentially all HI at the cloud edge while the inner shells become nearly empty (fHI<0.001f_{\rm HI}<0.001). Concurrently, the inner temperature is overestimated by a factor of 2–4 to compensate for the missing absorption, effectively erasing the expected central-cold, outer-warm temperature gradient. With the correct RestR_{\rm est} (1.46 pc), both profiles closely track the true curves. Overestimation (≥1.80\geq1.80 pc) shifts the abundance peak inward to the shell near 1.46 pc. The fitted profile matches the true one for r<1.46r<1.46 pc but drops sharply beyond, creating an additional low-fHIf_{\rm HI} envelope outside that region.

Figure 6. Temperature and HI abundance profiles recovered under different RestR_{\rm est} assumptions, compared to the true profiles (dashed black curves). Each profile is the median across 10 noise realizations.

The above results expose a clear asymmetry. Underestimating RestR_{\rm est} severely compresses the available volume, causing the temperature gradient within the true cloud radius to be flattened and forcing all HI into the outermost shell. It destroys the physical temperature structure that the HINSA diagnostic relies on. In contrast, overestimating RestR_{\rm est} preserves the inner temperature gradient to within a smaller error, and the extra shells beyond 1.46 pc contribute limited absorption, so the internal solution remains largely intact. Therefore, in practice, when RoutR_{\rm out} is uncertain, we recommend that users adopt a generous upper bound rather than a tight lower bound, as underestimating the outer radius is far more damaging than overestimating it.

Application to Observational Data

We apply the hinspheres pipeline to two dark cores observed in HINSA: L1574 and L1544. We selected these two sources because their HI centers coincide with their dust centers, their HINSA structures have been carefully studied in previous works ([10, 43]), while no ring-like HI abundance distribution analogous to that of B227 was identified in either of them.

L1574 (or L1574b) is a low-mass dark core located at a distance of d=300d = 300 pc ([16]). It exhibits clear HINSA features at around 0 km/s ([10]), who found that its spectral profiles are highly consistent with those of the 13CO{}^{13}\mathrm{CO}, C18O{}^{\mathrm{C}}{}^{18}\mathrm{O}, and OH molecular emission in both velocity and line width. This consistency suggests that cold HI is well mixed with the molecular gas within the core. They obtained an observed HI abundance of approximately 10−310^{-3}, implying a core age on the order of 10610^6 to 10710^7 years. The core was mapped with the Arecibo 305 m telescope’s ALFA feed array as part of the observations by P. Zuo et al. [43]. Although it is located close to B227 on the plane of the sky, P. Zuo et al. [43] did not detect the central HI abundance depression seen in B227. Here, we utilize their destriped three-dimensional HI data cube (beam size 3.83′, velocity resolution 0.184 km/s). The per-channel noise we measured from line-free channels is σ∼50\sigma\sim50 mK.

L1544 is a well-studied prestellar core located at d=170d = 170 pc [9]. The core exhibits extremely low gas temperatures in its inner regions, with interferometric NH3_3 observations resolving a gas temperature drop from 12 K to 5.5 K within the innermost ∼5000\sim5000 AU at the center [7]. L1544 possesses an exceptionally rich molecular line spectrum. CO isotopologues are heavily depleted toward the center, with a depletion factor of ∼10\sim10 at the dust peak [4]. In contrast, species such as N2_2H+^+ and N2_2D+^+ remain in the gas phase throughout the core, exhibiting a high deuterium fraction [6]. L1544 hosts a variety of complex organic molecules [37, 15]. Additionally, carbon-chain molecules and cyanopolyynes have been detected, revealing the chemical complexity of the source [31, 2]. The chemical age of L1544 has been estimated using various molecular tracers and modeling approaches, yielding a wide range of values. Early estimates based on CO depletion suggested a young age of ∼104\sim10^4 yr [4]. A. I. Vasyunin et al. [39] employed a multilayer gas-grain chemical model and found that the peak abundances of COMs in L1544 are reached at timescales of (1−2)×105(1 - 2) \times10^5 yr, corresponding to the epoch when the modeled CO depletion factor matches the observed value. In contrast, sulfur chemistry modeling by C. Vastel et al. [38] yielded a best-fit age of 10610^6–10710^7 yr. P. F. Goldsmith & D. Li [10] carried out a multi-species study of L1544, combining HINSA, OH, 13^{13}CO, C18^{18}O, and CI observations. The spatial distributions of HINSA, 13^{13}CO, and C18^{18}O are found closely correlated. Using a triaxial Gaussian model, they obtained an HI abundance of 2.3×10−42.3 \times10^{-4}–4.8×10−44.8 \times10^{-4}, from which they inferred a cloud age of 106.510^{6.5}–10710^7 yr as a lower limit. For L1544, we use HI data cube from the FAST CRAFTS survey. The data have an angular resolution of 2.9′2.9' and a velocity resolution of 0.201 km/s. The nominal RMS noise of the CRAFTS data is expected to be 0.17 K [5]. However, the per-channel noise measured from line-free channels is σ∼91\sigma\sim91 mK. We therefore adopt this measured value.

For L1574 and L1544, we construct the total hydrogen column density NHN_{\mathrm{H}} map from the Planck 353 GHz dust optical depth map (σ353=6.3×10−27\sigma_{353} = 6.3 \times10^{-27} cm2^2; Planck Collaboration et al. [28]). We then fit the map to get the Plummer density parameters (n0n_0, r0r_0, α\alpha; Table 6). RoutR_{\mathrm{out}} and central coordinates of the two cores are determined from both the NHN_{\mathrm{H}} map and the HI data. RoutR_{\mathrm{out}} are set to be 1.3 and 0.7 pc, respectively. The background HI emission cube was extracted using the built-in background extraction tool of hinspheres in its simple mode. For L1574, we mask -2.12–1.93 km/s and model the background by fitting a default fifth-order polynomial over a range of ±8\pm8 km/s around the line center. For L1544, we mask 5.24–7.35 km/s. Because the line-of-sight velocity structure toward L1544 is complex, to avoid contamination from the component at 3.0 km/s, we instead perform a third-order polynomial background fit over ±3\pm3 km/s around the line center. The mean HI intensity maps and line-center spectra for both cores are shown in Figure 7. We then fix the density profile and optimize the remaining parameters. In the fits, we used five radial shells for both cores.

CoreαJ2000\alpha_{\mathrm{J2000}} (h m s)δJ2000\delta_{\mathrm{J2000}} (° ′ ″)dd (pc)vlsrv_{\mathrm{lsr}} (km/s)RoutR_{\mathrm{out}} (pc)Beam (′)Δv\Delta v (km/s)σrms\sigma_{\mathrm{rms}} (mK)n0n_0 (cm−3^{-3})r0r_0 (pc)α\alpha
L157406:08:05.0+18 33 363000.01.33.830.184501.60×1041.60 \times10^40.3392.63
L154405:04:17.2+25 12 361707.00.72.90.201911.68×1051.68 \times10^50.0782.55

Table 6. Observational and fitted density parameters adopted for L1574 and L1544.

Figure 7. Central-beam spectra (left) and line-center channel-averaged maps (middle and right) for L1574 (top) and L1544 (bottom). Left: observed, best-fit model, and polynomial background spectra extracted as the Gaussian-weighted mean over the synthesized beam centered on the core (3.83′ for L1574 and 2.9′ for L1544). Middle and right: observed and model cubes averaged over ±2\pm2 km/s around the fitted line-center velocity. Each map is centered on the adopted core center. The white dashed circle marks RoutR_{\mathrm{out}}.

The best-fit parameters for both cores are listed in Table 3, and the obtained radial profiles are shown in Figure 8. On scales from 0.1 pc to RoutR_{\mathrm{out}}, L1544 exhibits a steeper density profile than that of L1574. Its central density, n0=1.68×105n_0 = 1.68 \times10^5 cm−3^{-3} is high, while r0=0.078r_0 = 0.078 pc remains below the data’s resolution of 0.14 pc. Therefore, its density profile is overall power-law-like, and r0r_0 is not sufficiently constrained. In contrast, the density profile of L1574 is closer to a Bonnor-Ebert profile, with r0r_0 close to its resolution of 0.33 pc. Table 3 shows that the central temperature T0T_0 and the envelope temperature T1T_1 of L1574, and the temperature transition radius rTr_T of L1544, lie at the boundaries of our adopted parameter ranges (T0T_0: 5–30 K, T1T_1: 10–100 K, rTr_T: 0.01 pc to RoutR_{\mathrm{out}}, marked by †). The upper bound of rTr_T is set to RoutR_{\mathrm{out}} so that the temperature transition occurs inside the modeled cloud. These boundary values are formal parameters of the parametric profile rather than temperature measurements, and the physical temperature structure is the resolved profile within RoutR_{\mathrm{out}} shown in Figure 8. From the resolution limit to RoutR_{\mathrm{out}}, the temperatures are approximately 15.0–65.8 K for L1574 and 13.2–32.2 K for L1544. Both cores exhibit radial temperature profiles with lower values in central regions. Because the beam sizes of the two data sets are 3.8′ for L1574 and 2.9′ for L1544, corresponding to physical scales of 0.33 and 0.14 pc at their respective distances, the data constrain the temperature profile only on scales larger than the beam. Values at smaller radii, including the formal central temperature T0T_0, are extrapolations of the parametric form. For example, the fitted temperature of L1544 at its 2.9′ beam, 13.2 K, represents an average over a region about 6 times larger than the innermost ∼5000\sim5000 AU, where A. Crapsi et al. [7] resolve gas at only a few K, and is therefore not directly comparable to their value. We obtain HI abundance profiles with lower central abundances in both cores, similar to the case of B227 reported by P. Zuo et al. [43]. Previous HINSA studies (P. F. Goldsmith & D. Li [10]; P. Zuo et al. [43]) failed to detect this phenomenon in these two cores, demonstrating the necessity of our hinspheres framework. The peak HI shells lie at the outermost radius, qualitatively consistent with the inside-out HI-to-H2_2 transition picture of P. F. Goldsmith et al. [11]. For these two cores, the fitted abundance profiles span about three orders of magnitude. Among them, L1544 shows a lower central HI abundance, reaching 0.003%. Neither of these two cores shows significant infall. In the fitting, we simply set vlsrv_{\mathrm{lsr}} to 0.0 and 7.0 km/s. Combined with the fitted δv\delta_v, we derive HINSA line-center velocities of −0.27 and 6.90 km/s for the two cores, respectively. The residuals of the two fits are not dominated by noise. For both cores, uncertainties in the polynomial background extraction introduce additional residuals. Moreover, as shown in Figure 7, L1574 exhibits a more elliptical morphology, which leads to a larger residual.

Figure 8. Radial density, temperature, and HI abundance profiles recovered for L1574 and L1544.

We use the fitted radial density and HI abundance profiles to calculate the chemical age of each core. Following P. F. Goldsmith & D. Li [10], the age of a shell with measured HI abundance fHIf_{\mathrm{HI}} can be obtained by inverting Equation (15). The age is finite only for fHI>feqf_{\mathrm{HI}}>f_{\mathrm{eq}}, where feq=ζH2/(2k′n+ζH2)f_{\mathrm{eq}}=\zeta_{\mathrm{H}_2}/(2k'n+\zeta_{\mathrm{H}_2}) is the equilibrium abundance. Shells with fHI≲feqf_{\mathrm{HI}}\lesssim f_{\mathrm{eq}} have already reached chemical equilibrium and yield only a lower limit on the age.

For L1574, all five shells have abundances above the equilibrium values, yielding chemical ages of 7.68×1057.68 \times10^5, 1.37×1061.37 \times10^6, 3.61×1063.61 \times10^6, 1.01×1071.01 \times10^7, 3.43×1063.43 \times10^6 yr, respectively. Given that each shell of a given core is expected to share a common chemical age, and that a direct arithmetic average of the shell-by-shell ages would be overly weighted by extreme values, we choose not to adopt the simple average (3.8×1063.8 \times10^{6} yr for L1574) as the derived age. Instead, we fit a single common age tt to the entire radial HI abundance profile by minimizing χ2(t)=∑i[log⁡10fHI,i−log⁡10xHI(t;nH,i)]2\chi^{2}(t) = \sum_i [\log_{10} f_{\mathrm{HI},i} - \log_{10} x_{\mathrm{HI}}(t; n_{\mathrm{H},i})]^2 over all shells, where xHI(t;nH,i)x_{\mathrm{HI}}(t; n_{\mathrm{H},i}) is Equation (15) evaluated at the density of shell ii. This logarithmic objective weights every shell equally in relative terms, and tt is restricted to the range 10310^{3}–10910^{9} yr. The quoted 1σ1\sigma interval is the 16th–84th percentile range of 2000 bootstrap realizations, each of which perturbs the shell abundances by the fit residual rms in log space. The fit yields a chemical age of (6.52±1.29)×106(6.52 \pm1.29) \times10^{6} yr (1σ1\sigma) for L1574. This value is in good agreement with the 106.510^{6.5}–10710^{7} yr range derived by P. F. Goldsmith & D. Li (2005). For L1544, not all shells are above the equilibrium abundance: the two innermost shells give ages of 1.60×1051.60 \times10^{5} and 1.08×1061.08 \times10^{6} yr, shell 3 has reached chemical equilibrium and yields only a lower limit of 1.67×1061.67 \times10^{6} yr, shell 4 lies far below the equilibrium abundance and gives no useful age constraint, and the outermost shell gives 8.41×1068.41 \times10^{6} yr. Applying the same single-age fitting method to the L1544 profile gives an overall chemical age of (8.66±1.70)×106(8.66 \pm1.70) \times10^{6} yr, indicating that the core is still in the HI-to-H2_2 transition phase.

Discussion

Non-Gaussianity of HINSA Profiles

The HINSA absorption profile ΔT(v)\Delta T(v) is not intrinsically Gaussian. In the multi-layer radiative transfer framework of hinspheres, each shell absorbs and re-emits at its own spin temperature, so the effective excitation temperature seen by the observer is in general a function of velocity. When the cloud has a radial temperature gradient and the line-of-sight optical depth is non-negligible, the resulting ΔT(v)\Delta T(v) deviates from a single Gaussian. Two independent physical effects contribute to this non-Gaussianity. First, an inward velocity field projects onto the line of sight as a radial velocity gradient, causing the HINSA to be distributed over a wider velocity range. For the moderate infall fraction adopted here (fff=0.1f_{\mathrm{ff}} = 0.1), this effect is small. Second, when the optical depth at the core center is large, the warm foreground layers no longer act as absorbers in the radiative transfer. Instead, their own emission fills in the line center, turning the single-dip absorption into a double dip [11].

To quantify the degree of non-Gaussianity across evolutionary stages, we generate noise-free synthetic cubes at ages between 10510^{5} and 5×1085 \times10^{8} yr, using the same fiducial cloud parameters as in Table 1. For each age we extract the central-beam spectrum and fit a single Gaussian to ΔT(v)\Delta T(v) in the velocity range ∣v∣≤3\lvert v \rvert\leq3 km/s, measuring the residual as the normalized RMS difference ⟨(ΔT−ΔTgauss)2⟩/max⁡(ΔT)\sqrt{\langle(\Delta T-\Delta T_{\mathrm{gauss}})^{2}\rangle}/\max(\Delta T). We use this residual to represent the deviation of the HINSA profile from a Gaussian.

Figure 9 shows the results. For the youngest cores, the saturation-flattened spectra with double-peaked features produce a deviation of ∼14.8%\sim14.8\%. As the cloud ages and the HI abundance decreases, the line saturation weakens and the profile becomes more Gaussian. The slight rise beyond ∼107\sim10^{7} yr is a normalization artifact: the absolute residual remains nearly constant while the peak ΔT\Delta T continues to decrease toward its steady-state value, inflating the ratio. Overall, at ages greater than ∼1×107\sim1 \times10^{7} yr, the deviation drops to ∼1.6%\sim1.6\%, making it possible to describe HINSA with a single Gaussian.

Figure 9. Deviation of the HINSA absorption profile from a single Gaussian as a function of chemical age. The normalized RMS residual between the central-beam ΔT(v)\Delta T(v) spectrum and its best-fitting single Gaussian is used as a measure of this deviation, computed for ages from 10510^{5} to 5×1085 \times10^{8} yr. Vertical dashed lines mark the ages of our synthetic cores.

These results show that the younger cores undergoing the HI-to-H2_2 transition are precisely those whose profiles deviate most strongly from a single Gaussian. Given that these younger cores are the key targets for studying the HI-to-H2_2 transition in molecular clouds, the need for our hinspheres tool is clear. By contrast, for clouds near or at chemical equilibrium, where the HI abundance is low and the profile approaches a Gaussian, the conventional approach remains applicable.

Pixel-by-Pixel Gaussian Fitting

Using the synthetic cores in § 4.1, we compare the hinspheres results with the pixel-by-pixel Gaussian fitting approach widely used in HINSA studies (D. Li & P. F. Goldsmith 2003). For each pixel, the absorption spectrum ΔT(v)=Tbg(v)−Tobs(v)\Delta T(v) = T_{\mathrm{bg}}(v) - T_{\mathrm{obs}}(v) is fitted with a Gaussian profile to extract the peak amplitude AA, central velocity v0v_{0}, and velocity dispersion σv\sigma_{v}. Unlike D. Li & P. F. Goldsmith (2003), who have to re-construct TbgT_{\mathrm{bg}} by fitting a polynomial across the narrow absorption feature, the background is known exactly from the setup for our synthetic cores. This constitutes a best-case baseline for the pixel-by-pixel Gaussian method. Later improvements (M. Krčo et al. 2008) use molecular-line templates and second-derivative spectra to constrain the background, reducing the ambiguity inherent in the polynomial fit, but the underlying inversion of the absorption profile, in which the HINSA feature is treated as a single Gaussian component, remains the same.

Since there is no foreground component for our synthetic cores, we apply two-component radiative transfer fitting to every pixel of these cores. Under the two-component radiative transfer comprising only the background HI emission and the dark cloud, the observed brightness temperature at velocity vv is

Tobs(v)=Tbg(v)e−τ(v)+T[1−e−τ(v)],(16)T_{\mathrm{obs}}(v) = T_{\mathrm{bg}}(v)e^{-\tau(v)} + T\left[1-e^{-\tau(v)}\right], \tag*{(16)}

where TT is the HI spin temperature. Rearranging gives the optical depth at the line center,

τ0=−ln⁡(1−ATbg(v0)−T).(17)\tau_{0} = -\ln\left(1-\frac{A}{T_{\mathrm{bg}}(v_{0})-T}\right). \tag*{(17)}

We adopt T=15T = 15 K, a representative value for cold HINSA gas within the 10–25 K range reported by D. Li & P. F. Goldsmith (2003). The HI column density is then obtained from

NHI=1.95×1018τ0ΔVkm s−1TK cm−2,(18)N_{\mathrm{HI}} = 1.95 \times10^{18}\tau_{0}\frac{\Delta V}{\mathrm{km\,s^{-1}}}\frac{T}{\mathrm{K}}\ \mathrm{cm^{-2}}, \tag*{(18)}

with ΔV=8ln⁡2 σv\Delta V = \sqrt{8\ln2}\,\sigma_{v}, the Gaussian FWHM (D. Li & P. F. Goldsmith 2003, Equation 13). This formula is equivalent to the standard relation NHI=1.823×1018T∫τ(v) dvN_{\mathrm{HI}} = 1.823 \times10^{18} T \int\tau(v)\,\mathrm{d}v evaluated for a Gaussian line profile: since ∫τ(v) dv=τ0σv2π\int\tau(v)\,\mathrm{d}v = \tau_{0}\sigma_{v}\sqrt{2\pi} and ΔV=22ln⁡2 σv\Delta V = 2\sqrt{2\ln2}\,\sigma_{v}, the coefficient becomes 1.823×1018×2π/(22ln⁡2)∼1.95×10181.823 \times10^{18} \times\sqrt{2\pi}/(2\sqrt{2\ln2}) \sim1.95 \times10^{18}.

Combining the resulting NHIN_{\mathrm{HI}} map with our derived NHN_{\mathrm{H}} map (see § 4.1) yields the two-dimensional projected abundance fHI,2D=NHI/NHf_{\mathrm{HI,2D}} = N_{\mathrm{HI}}/N_{\mathrm{H}}, where NH=NHI+2NH2N_{\mathrm{H}} = N_{\mathrm{HI}} + 2N_{\mathrm{H_{2}}} is the total hydrogen column. For studies using the pixel-by-pixel 2D fitting approach, it is usually difficult to recover the three-dimensional abundance fHI=nHI/nHf_{\mathrm{HI}} = n_{\mathrm{HI}}/n_{\mathrm{H}}. Therefore, they typically treat fHI,2Df_{\mathrm{HI,2D}} as the derived HI abundance for subsequent analysis [34, 43] (D. Li & P. F. Goldsmith 2003; M. Krčo et al. 2008; M. Krčo & P. F. Goldsmith 2010). Using the resulting fHI,2Df_{\mathrm{HI,2D}} distribution, we derive the radial abundance profile and present it in Figure 10. The figure also shows the true 3D radial abundance and the hinspheres-recovered 3D profile for all four evolutionary stages.

Figure 10. True and fitted radial abundance profiles for the four synthetic cores. Here the 3D volume abundance is fHI(r)=nHI(r)/nH(r)f_{\mathrm{HI}}(r)=n_{\mathrm{HI}}(r)/n_{\mathrm{H}}(r) and the 2D projected column abundance is fHI,2D(b)=NHI(b)/NH(b)f_{\mathrm{HI,2D}}(b)=N_{\mathrm{HI}}(b)/N_{\mathrm{H}}(b), where nH=nHI+2nH2n_{\mathrm{H}}=n_{\mathrm{HI}}+2n_{\mathrm{H}_2} and NH=NHI+2NH2N_{\mathrm{H}}=N_{\mathrm{HI}}+2N_{\mathrm{H}_2} are the total hydrogen-nucleus volume and column densities. Black solid lines show the true 3D volume abundance. Gray lines show the 3D volume abundance obtained with hinspheres. Blue solid lines show fHI,2D(b)f_{\mathrm{HI,2D}}(b) from pixel-by-pixel single-Gaussian fitting, and blue dashed lines show its inverse-Abel deprojection back to the 3D volume abundance.

As shown in the figure, the pixel-by-pixel Gaussian approach systematically underestimates the peak abundance and smooths the radial gradient. For the youngest core, the true abundance rises from fHI∼0.45f_{\mathrm{HI}} \sim0.45 at the innermost shell to near unity at 1.46 pc. The radially averaged 2D abundance peaks at only ∼0.08\sim0.08 at the outermost bin, which is a factor of 13 below the true value at the same radius. At the oldest stage, the HI abundance spans two orders of magnitude, from ∼10−4\sim10^{-4} at the core to ∼10−2\sim10^{-2} in the outermost shell. The 2D profile, however, is only ∼0.001\sim0.001–0.0030.003 and is much flatter than the true profile, overestimating the abundance in the central part and underestimating it in the outermost shell. In real observations, owing to the complex morphology of the core, relatively high noise, and background-fitting errors, this tiny 0.001–0.003 abundance gradient can easily be washed out, making it impossible to observe the ring-like distribution of HI abundance. By contrast, the fitting results of hinspheres recover the full radial trend. Even the innermost shell of the 10510^5 yr core, whose line-center opacity is the largest of any shell, is recovered to within ∼5%\sim5\%.

The systematic bias of the 2D method has three physical origins. The first is saturation. In young cores the inner shells have high HI density (nHI∼5×103 cm−3n_{\mathrm{HI}} \sim5 \times10^3\ \mathrm{cm}^{-3} for the 10510^5 yr core), giving a cumulative line-center optical depth τ0∼103\tau_0 \sim10^3 toward the center. Each layer along the line of sight both absorbs and re-emits at its own spin temperature. The cold, optically thick interior absorbs a significant part of the background radiation and lowers the brightness temperature transmitted to the foreground layers. The warm, optically thinner foreground layers can then contribute net emission if their spin temperature exceeds this transmitted brightness temperature, partially filling in the absorption dip. The observed line-center brightness is therefore a mixture of the transmitted background and the foreground emission, rather than the pure absorption signal of the gas.

The pixel-by-pixel method models the cloud as a single isothermal slab (T=15T = 15 K) and inverts the measured amplitude through Equation (17). Because the warm foreground raises the observed brightness above what the cold interior alone would produce, the absorption dip is shallower than the single-slab model expects. As a result, the maximum τ0\tau_0 recoverable from Equation (17) is τ0max⁡∼0.96\tau_0^{\max} \sim0.96 at T=15T = 15 K (∼0.90\sim0.90 at 2525 K, ∼1.1\sim1.1 at 1010 K), regardless of the true value. The derived column density therefore saturates at ∼4\sim4–8×1019 cm−28 \times10^{19}\ \mathrm{cm}^{-2}, far below the Planck NH≳4.5×1020 cm−2N_{\mathrm{H}} \gtrsim4.5 \times10^{20}\ \mathrm{cm}^{-2}, keeping fHI,2Df_{\mathrm{HI,2D}} below ∼0.1\sim0.1 at all radii.

Even when the optical depth is moderate and the line shape is close to Gaussian, the 2D projected abundance is a column-weighted average over all shells along each line of sight. For a sight line through the cloud center, the HI-rich outer layers contribute long path lengths at every impact parameter, pulling the recovered abundance at inner radii up toward the high outer-shell values. At the largest impact parameters the sight line reaches only the outermost shell and projection contamination is negligible. The residual underestimate there is set by the single-TT assumption discussed below.

The pixel-by-pixel method assumes a single representative TT (here 1515 K) for all velocity channels. In a cloud with a radial temperature gradient, the spin temperature of the absorbing column is in fact velocity-dependent: line-center channels probe deeper, colder layers while the wings sample warmer outer gas. The assumed TT therefore does not represent the true radially varying excitation, introducing a systematic offset in the derived τ0\tau_0 and NHIN_{\mathrm{HI}}. This effect is secondary compared with saturation and projection mixing, but it contributes to the residual underestimate at large impact parameters where the optical depth is moderate.

The 2D projected abundance can in principle be improved by deprojection. The inverse Abel transform converts the projected column profile of a spherically symmetric cloud into a volume profile without assuming a particular radial functional form ([29, 42]). We apply it separately to NHI(b)N_{\mathrm{HI}}(b) and NH(b)N_{\mathrm{H}}(b) and combine into fHI,Abel(r)=nHI(r)/nH(r)f_{\mathrm{HI,Abel}}(r) = n_{\mathrm{HI}}(r)/n_{\mathrm{H}}(r) (blue dashed line in Figure 10). The deprojection does sharpen the radial gradient compared with the flat 2D profile, but it cannot fully recover the true abundance because the input NHIN_{\mathrm{HI}} map itself is already compromised by saturation and the single-TT assumption. For the 10510^5 yr core, the deprojected inner abundance remains a factor of ∼270\sim270 below the true value. For the 5×1085 \times10^8 yr core, the recovered profile stays flat at ∼0.0006\sim0.0006–0.00160.0016 (shell-averaged relative error 84%84\%), barely changed from the 2D result. The Abel formula is also ill-conditioned: the volume density n(r)n(r) depends on the derivative dN/db\mathrm{d}N/\mathrm{d}b over all b>rb > r, so noise and truncation errors at large radii propagate toward the center where the signal is weakest.

To assess how these systematic biases translate into errors on the inferred chemical age, we compare the ages derived from hinspheres and the Gaussian-based methods with the true ages of the synthetic cores in Figure 11. We consider a shell to have reached equilibrium when at least 99.9%99.9\% of its convertible HI at the corresponding density has been converted. For the hinspheres results in the three older cores, the method reasonably well recovers the corresponding HI abundances regardless of whether a specific shell reached equilibrium. Consequently, the inferred ages of the various shells within the same core remain similar to the true age. In the outer shells of the oldest core, the fitted abundances lie above the plotted curves (up to ∼18%\sim18\% above the true abundances, see Table 3), yet these shells are still at equilibrium. The reason is that our hinspheres fitting adopts densities derived from our NHN_{\mathrm{H}}-map. Density errors from fitting this map result in adopted densities being lower than the true values at the outer shells. Since the equilibrium HI abundance scales as fHI∼nH−1f_{\mathrm{HI}} \sim n_{\mathrm{H}}^{-1} (see Equation (15)), both the fitted abundance and the equilibrium value are raised. Thus, this offset merely shifts the data point vertically relative to the true-density curve without changing its equilibrium status. For the 10510^5 yr core, because its fHIf_{\mathrm{HI}} is relatively close to 1, hinspheres yields underestimated ages for the three outermost shells, while the ages calculated for the four inner shells remain close to 10510^5 yr. The pixelby-pixel Gaussian method yields large age errors for the three younger cores, with inferred ages spreading over 10610^{6}–3×1073\times10^{7} yr regardless of their true ages, making the age inference for these cores highly uncertain. The inverse Abel correction narrows this spread slightly. However, for the 5×1085\times10^{8} yr core, both Gaussian-based methods correctly identify the fact that the core has reached equilibrium.

Figure 11. HI abundance evolution and inferred chemical ages derived from hinspheres and two Gaussian-based methods. (a) HI abundance evolution at the densities of the seven shells of our fiducial model. Colored dashed vertical lines mark the true ages of the four synthetic cores, and colored symbols show the hinspheres results. Curves and symbols sharing the same shell index refer to the same shell at different densities: curves use the true density, while fitted abundances reference the NHN_{\rm H}-map density adopted in the fit. This leads to a small vertical offset between the curves and the symbols due to the density normalization. Circles denote shells with an invertible age, right-pointing triangles denote shells that have reached equilibrium (>99.9%> 99.9\% of convertible HI converted), and left-pointing triangles denote shells with fHI→1f_{\rm HI} \to1 (<0.1%< 0.1\% converted). For clarity, right-pointing triangles for shells that truly reached equilibrium are plotted at their corresponding true ages. (b) Inferred chemical age for each core and method (hinspheres, Gaussian, and Gaussian after inverse Abel correction). All shells of a given core and method share the same horizontal position, with more transparent circles indicating lower-density shells. Shells correctly identified as equilibrium are shown as up-triangles at the core’s true age. Shells claimed to be at equilibrium but not truly reached appear in the upper row. Shells with fHI→1f_{\rm HI} \to1 appear as down-triangles in the lower row. Dashed horizontal segments mark the true age of each core, and numbers indicate the shell counts when triangle markers overlap.

In summary, the pixel-by-pixel Gaussian method’s bias is dominated by optical-depth saturation at young stages and by projection mixing at later stages, with the single-TT assumption playing a secondary role throughout. More fundamentally, this approach presupposes that the HINSA feature is a pure absorption dip, whereas in reality each layer both absorbs and re-emits. The conventional approach is therefore reliable only when the HINSA profile is close to Gaussian, that is, when the cloud is near chemical equilibrium and the line-center optical depth is small. In practice, observers can assess this by inspecting the absorption profile: a clean, symmetric single-dip shape indicates that the single-Gaussian inversion is applicable, while a double-peaked, flattened, or otherwise non-Gaussian profile signals serious bias. For such sources, forward multi-shell radiative-transfer fitting as implemented in hinspheres is necessary.

Applicability and Limitations

The comparisons above demonstrate that multi-shell radiative-transfer fitting substantially improves over the single-Gaussian inversion, particularly for young cores where the HINSA profile departs strongly from a Gaussian shape. hinspheres achieves this by modeling the cloud as a spherically symmetric, multi-layer system with parametric density and temperature profiles. These assumptions enable efficient, physically motivated fitting, but they also define the regime in which the results can be trusted. Real cores may deviate from spherical geometry, and the density–abundance degeneracy and the sensitivity to the outer radius impose further constraints.

Our forward model assumes spherical symmetry (§ 2). L1574 and L1544 approximately satisfy this criterion, though L1574 shows mild ellipticity. Both these cores are relatively isolated, low-mass cores with centrally concentrated HINSA structures. The pipeline recovers physically meaningful radial profiles for them, and the chemical ages derived from the abundance profiles are reasonable. The clearest counter-example is B227, where the dust-emission peak and the ring-like HINSA center are offset by several arcmin [43 {xrefext}]Fig. 1), making a single spherically symmetric model inappropriate. This prevents us from fitting B227 with hinspheres, even though P. Zuo et al. [43] has already identified its ring-like HI abundance structure using a pixel-by-pixel single-Gaussian approach. In addition to cases where the dust emission peak and the HI core are offset, cores with pronounced morphological asymmetry (e.g., elongated or filamentary morphology) or those in complex environments (e.g., a one-sided illuminating radiation field) also break the spherical-symmetry assumption and therefore cannot be well described by the parametric model implemented here.

Beyond the geometric requirement, the density-abundance degeneracy is the dominant source of parameter uncertainty. In § 4.3, without any density prior, ⟨δfHI⟩\langle\delta f_{\rm HI} \rangle reaches 182%182\%, while even a loose ±1σ\pm1\sigma Planck constraint reduces this to ∼22%\sim22\%. This degeneracy is intrinsic to the radiative transfer of the HI line. The density profile must therefore be anchored by dust continuum, dust extinction, or CO isotopologue data before the HI abundance can be recovered meaningfully.

Finally, the outer radius must be correctly estimated. § 4.4 showed that underestimating RoutR_{\rm out} by more than ∼18%\sim18\% is catastrophic, while overestimating by up to 71%71\% produces only moderate biases. When RoutR_{\rm out} is uncertain, a generous upper bound should therefore be adopted.

If one or more of these conditions is violated, the fit residuals increase and the derived abundance profiles become unreliable. For such sources, axially symmetric or fully three-dimensional models, potentially coupled with non-LTE line transfer, would be more appropriate. When all of these conditions are satisfied, however, hinspheres can yield reasonably reliable results.

Summary

We have presented hinspheres, an open-source Python pipeline for spherically symmetric radiative transfer modeling and fitting of HINSA. The package models a cloud as NN concentric shells with parametric Plummer density and temperature profiles, a discrete radial HI abundance distribution, and optional infall and rigid-body rotation velocity fields. Layer-by-layer radiative transfer is solved through a three-dimensional data cube, and a derivative-free CMA-ES optimizer jointly determines the cloud structure, kinematics, and HI abundance profile by minimizing a radially weighted residual between the model and observed data cube.

The pipeline is validated on synthetic HINSA spectra generated from time-dependent chemical models of four evolutionary stages spanning 10510^5 to 5×1085 \times10^8 yr. Application to the real dark cores L1544 and L1544 demonstrates recovery of radially varying HI abundance profiles and chemical ages consistent with independent estimates. Key results include:

  1. With an independent column-density constraint from NHN_{\mathrm{H}} column density mapping, the Plummer density parameters (n0,r0,α)(n_0, r_0, \alpha) are recovered within ∼10%\sim10\%, and the CMA-ES fit recovers the remaining 15 parameters (temperature structure, seven-shell HI abundance, kinematics) with a mean relative error of ⟨δall⟩=4.6\langle\delta_{\mathrm{all}}\rangle= 4.6–6.8%6.8\% across the four evolutionary stages.

  1. A combined resolution–noise grid with 7×77 \times7 beam–noise combinations and 980 total fits shows that for a core within 1 kpc observed at FAST resolution, the median recovery error of all 15 parameters remains below 16% for RMS <0.2< 0.2 K under our synthetic conditions, and only exceeds 50% for beams of 20′20' or larger at RMS ≥0.6\ge0.6 K, or at 30′30' nearly independently of the noise level.

  1. A systematic study of density and temperature constraint schemes demonstrates that the density–abundance degeneracy is the dominant source of uncertainty. Without any density prior, ⟨δfHI⟩\langle\delta_{f_{\mathrm{HI}}}\rangle reaches 182%, while even a loose ±1σ\pm1\sigma Planck constraint reduces it to ∼22%\sim22\%, and fixing the density reduces it further to ∼9%\sim9\%. A temperature prior provides secondary improvement, most valuable when the density constraint is only approximate.

  1. Underestimating the total cloud radius RoutR_{\mathrm{out}} by more than ∼18%\sim18\% is catastrophic, while overestimating by up to 71% produces only moderate biases. When RoutR_{\mathrm{out}} is uncertain, a generous upper bound should therefore be adopted.

  1. HINSA profiles of young, HI-rich cores (≲107\lesssim10^7 yr) deviate strongly from a single Gaussian due to line-center saturation and the projected velocity gradient, rendering single-Gaussian analysis unreliable for these objects.

  1. A comparison with the conventional pixel-by-pixel single-Gaussian method reveals that the two-dimensional approach suffers from three systematic biases. Optical-depth saturation caps the recoverable column density when the line center is optically thick. Projection mixing causes shells of different abundances to be superposed along each line of sight. The single spin-temperature assumption ignores the velocity-dependent excitation structure. The method remains applicable when the cloud is near chemical equilibrium and the HINSA profile is close to Gaussian, but for young, HI-rich cores whose profiles deviate strongly from a Gaussian, forward multi-shell radiative transfer fitting as implemented in hinspheres is necessary.

  1. Application of hinspheres to L1574 and L1544 yields HI abundance profiles spanning about three orders of magnitude and single-age chemical fits of (6.52±1.29)×106(6.52 \pm1.29) \times10^6 yr and (8.66±1.70)×106(8.66 \pm1.70) \times10^6 yr, respectively, both consistent with the inside-out HI-to-H2_2 transition picture.

hinspheres is publicly available at https://github.com/olozhika/hinspheres under the MIT license.

Acknowledgments

This work is supported by National Natural Science Foundation of China (NSFC) grants Nos. 12588202. We thank Professor Diego Mardones for his insightful discussions.

References

  1. [1]Bergin, E. A., & Tafalla, M. 2007, ARA&A, 45, 339, doi: 10.1146/annurev.astro.45.071206.100404DOI
  2. [2]Bianchi, E., Remijan, A., Codella, C., et al. 2023, ApJ, 944, 208, doi: 10.3847/1538-4357/acb5e8DOI
  3. [3]Bolatto, A. D., Wolfire, M., & Leroy, A. K. 2013, ARA&A, 51, 207, doi: 10.1146/annurev-astro-082812-140944DOI
  4. [4]Caselli, P., Walmsley, C. M., Tafalla, M., Dore, L., & Myers, P. C. 1999, ApJL, 523, L165, doi: 10.1086/312280DOI
  5. [5]CHINA Survey Team. 2024, The CRAFTS HI Narrow All-sky (CHINA) Survey,, http://groups.bao.ac.cn/ism/CRAFTS/202404/t20240411_774079.html
  6. [6]Crapsi, A., Caselli, P., Walmsley, C. M., et al. 2005, ApJ, 619, 379, doi: 10.1086/426472DOI
  7. [7]Crapsi, A., Caselli, P., Walmsley, M. C., & Tafalla, M. 2007, A&A, 470, 221, doi: 10.1051/0004-6361:20077613DOI
  8. [8]Draine, B. T. 2011, Physics of the Interstellar and Intergalactic Medium Field, G. B. 1958, Proceedings of the IRE, 46, 240, doi: 10.1109/JRPROC.1958.286741
  9. [9]Galli, P. A. B., Loinard, L., Bouy, H., et al. 2019, A&A, 630, A137, doi: 10.1051/0004-6361/201935928DOI
  10. [10]Goldsmith, P. F., & Li, D. 2005, ApJ, 622, 938, doi: 10.1086/428032DOI
  11. [11]Goldsmith, M. F., Li, D., & Krčo, M. 2007, ApJ, 654, 273, doi: 10.1086/509067DOI
  12. [12]Gould, R. J. 1994, ApJ, 423, 522, doi: 10.1086/173830DOI
  13. [13]Hansen, N. 2016, in arXiv:1604.00772, doi: 10.48550/arXiv.1604.00772
  14. [14]Hollenbach, D., & Salpeter, E. E. 1971, ApJ, 163, 155, doi: 10.1086/150754DOI
  15. [15]Jiménez-Serra, I., Vasyunin, A. I., Caselli, P., et al. 2016, ApJL, 830, L6, doi: 10.3847/2041-8205/830/1/L6
  16. [16]Kawamura, A., Onishi, T., Yonekura, Y., et al. 1998, ApJS, 117, 387, doi: 10.1086/313119DOI
  17. [19]Le Bourlot, J., Pineau Des Forets, G., Roueff, E., & Flower, D. R. 1993, A&A, 267, 233
  18. [22]Li, Y., Xu, Y., Xu, J.-L., et al. 2022, ApJL, 933, L26, doi: 10.3847/2041-8213/ac7b7cDOI
  19. [23]Liu, B., Li, D., Staveley-Smith, L., et al. 2019, ApJ, 887, 242, doi: 10.3847/1538-4357/ab54cdDOI
  20. [24]Liu, X., Wu, Y., Zhang, C., et al. 2022, A&A, 658, A140, doi: 10.1051/0004-6361/202141477DOI
  21. [25]Luo, G., Li, D., Zhang, Z.-Y., et al. 2024, A&A, 685, L12, doi: 10.1051/0004-6361/202450067DOI
  22. [26]Marsh, K. A., Griffin, M. J., Palmeirim, P., et al. 2014, MNRAS, 439, 3683, doi: 10.1093/mnras/stu219DOI
  23. [27]McKee, C. F., & Ostriker, E. C. 2007, ARA&A, 45, 565, doi: 10.1146/annurev.astro.45.051806.110602DOI
  24. [28]Planck Collaboration, Abergel, A., Ade, P. A. R., et al. 2014, A&A, 571, A11, doi: 10.1051/0004-6361/201323195
  25. [29]Roy, A., André, P., Palmeirim, P., et al. 2014, A&A, 562, A138, doi: 10.1051/0004-6361/201322236DOI
  26. [30]Shaw, G., Ferland, G. J., & Hubeny, I. 2017, ApJ, 843, 149, doi: 10.3847/1538-4357/aa7747DOI
  27. [31]Snell, R. L., Schloerb, F. P., Young, J. S., Hjalmarson, A., & Friberg, P. 1981, ApJ, 244, 45, doi: 10.1086/158683DOI
  28. [32]Sun, S., Wang, K., Liu, X., & Xu, F. 2024, ApJL, 973, L27, doi: 10.3847/2041-8213/ad77ceDOI
  29. [33]Tafalla, M., Myers, P. C., Caselli, P., & Walmsley, C. M. 2004, Ap&SS, 292, 347, doi: 10.1023/B:ASTR.0000045036.76044.bdDOI
  30. [34]Tang, N.-Y., Zuo, P., Li, D., et al. 2020, Research in Astronomy and Astrophysics, 20, 077, doi: 10.1088/1674-4527/20/5/77DOI
  31. [35]Tielens, A. G. G. M. 2005, The Physics and Chemistry of the Interstellar Medium
  32. [37]Vastel, C., Ceccarelli, C., Lefloch, B., & Bachiller, R. 2014, ApJL, 795, L2, doi: 10.1088/2041-8205/795/1/L2DOI
  33. [38]Vastel, C., Quénard, D., Le Gal, R., et al. 2018, MNRAS, 478, 5514, doi: 10.1093/mnras/sty1336DOI
  34. [39]Vasyunin, A. I., Caselli, P., Dulieu, F., & Jiménez-Serra, I. 2017, ApJ, 842, 33, doi: 10.3847/1538-4357/aa72ecDOI
  35. [40]Xia, J., Tang, N., Bisbas, T. G., et al. 2026, Science China Physics, Mechanics, and Astronomy, 69, 269513, doi: 10.1007/s11433-025-2940-7DOI
  36. [41]Xing, Y., Li, D., Yue, N., et al. 2026, MNRAS, 550, stag1311, doi: 10.1093/mnras/stag1311DOI
  37. [42]Zhang, Y., Liu, Z., An, W., Ping, Y., & Zhong, J. 2023, ApJ, 952, 83, doi: 10.3847/1538-4357/acd75eDOI
  38. [43]Zuo, P., Li, D., Peek, J. E. G., et al. 2018, ApJ, 867, 13, doi: 10.3847/1538-4357/aad571DOI

Paper details

vlnc:W_krk9avkr
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 3

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents