betaFeedback

WorksPhysics and Astronomy

Quantum encoding of structured light into in-plane topological spin textures

Abstract

Structured light offers a powerful means of controlling light-matter interactions through multiple tunable optical degrees of freedom. Using micromagnetic simulations, we investigate the nucleation of asymmetric bimerons and antibimerons by pulsed Laguerre-Gaussian optical vortices in chiral ferromagnetic thin films with CnvC_{nv} and D2dD_{2d} symmetries, respectively. For optical vortices with orbital angular momentum (OAM) ∣m∣=1|m|=1, circularly polarized beams deterministically nucleate a single bimeron or antibimeron via the interplay of spin angular momentum, OAM, and magnetic chirality, whereas linearly polarized beams produce textures whose topological charge directly follows the OAM (Q=mQ=m). Optical vortices with OAM ∣m∣>1|m|>1 nucleate clusters and other configurations composed of multiple spin textures, whose morphology and topological charge depend sensitively on the optical quantum numbers and pulse parameters. These findings reveal a route to topology-selective writing through the encoding of optical quantum numbers into distinct in-plane topological magnetic states.

Introduction

Topological spin textures [1, 2], such as skyrmions [3, 4, 5, 6] and bimerons [7, 8, 9, 10], have emerged as promising candidates for encoding and processing information in nonvolatile memory and logic devices [11, 12, 13]. Their topological robustness, particle-like nature, nanoscale size, and current-driven manipulation make them appealing information carriers [14, 15] in the pursuit of higher storage density, faster operation, and device miniaturization. Furthermore, the ability to stabilize some of these spin textures in multiple distinct topological states [16, 17] makes them compelling building blocks for multi-valued logic [18, 19], enabling enhanced data capacity and energy-efficient operation [20]. Realizing the potential of these topological spin textures in practical spintronic devices requires the ability to reliably write, manipulate, and annihilate them on demand.

Writing magnetic skyrmions and other topological textures locally and with minimal energy consumption remains one of the central challenges for spintronic device engineering [21]. Conventional approaches rely on injecting local currents [22, 23], applying magnetic fields to shrink labyrinth domains into skyrmions [24, 25], exploiting transient Joule heating induced by nanosecond current pulses [26, 27], and utilizing strain-mediated control [28, 29]. Despite significant advances, these methods remain subject to limitations that include high current densities [30], excessive Joule heating losses [31], stochastic nucleation [32], and the need for intricate device architectures [33, 34]. These limitations have motivated growing interest in noncontact approaches for the deterministic and local creation of target spin textures.

All-optical control of magnetization [35] provides a noncontact route to the ultrafast generation of topological spin textures. While spatially uniform laser pulses have been shown to nucleate skyrmions and bimerons by transiently modifying magnetic interactions [36, 37, 38, 39], structured light offers a far more selective paradigm of optical control because its polarization, azimuthal phase winding, and radial structure are explicitly governed by optical quantum numbers. In particular, optical vortices (OVs) [40, 41, 42] have been theoretically proposed as a powerful means of deterministically generating topological spin textures in magnetic media [43]. To date, however, theoretical studies have focused primarily on

out-of-plane magnetized systems, predicting the creation of skyrmions and related out-of-plane textures [44, 45, 46]. By contrast, the use of structured light to nucleate topological spin textures within in-plane magnetized systems remains largely unexplored.

Here, we demonstrate the encoding of the optical quantum numbers of structured light into in-plane topological magnetic states. Using micromagnetic simulations, we model pulsed Laguerre-Gaussian (LG) OVs as spatially structured magnetic fields coupled to chiral ferromagnetic (FM) thin films through the Zeeman interaction [see Figure 1(a)]. For modes with orbital angular momentum (OAM) ∣m∣=1|m| = 1, circularly polarized OVs enable the deterministic writing of single asymmetric bimeron [Figure 1(b)] and antibimeron [Figure 1(c)] textures through the interplay of spin angular momentum (SAM), OAM, and magnetic chirality, whereas linearly polarized OVs directly encode the OAM into the topological charge QQ of the nucleated texture, yielding Q=mQ = m. For modes with ∣m∣>1|m| > 1, we demonstrate the nucleation of clusters and other configurations composed of multiple spin textures, with the final state depending sensitively on the optical quantum numbers and pulse parameters. Our results point to structured light as a powerful tool for the topology-selective writing of in-plane spin textures.

Schematic illustration of an optical vortex incident on a chiral magnetic thin film, with asymmetric bimeron and antibimeron configurations

Figure 1. (a) Schematic illustration of the model. An OV beam is incident on a chiral magnetic thin film. The spiral represents the helical phase front of the OV, the magenta arrow indicates its propagation direction, and the red arrows denote the initial uniform in-plane magnetization of the chiral magnet. (b) Magnetic configuration of an asymmetric bimeron. (c) Magnetic configuration of an asymmetric antibimeron. The sketches below panels (b) and (c) show the vortex-antivortex pair forming each spin texture.

Optical vortex micromagnetic model

We consider an ultrathin FM film lying in the xyxy-plane. The film is positioned at the focal plane (z=0z = 0) of a pulsed OV beam propagating along the zz-direction. The magnetic free energy of the system is given by

F=∫d3r{A(∇m)2+ϵa+ϵDM−Msm⋅[Bst+B(r,t)]},(1)F = \int d^3r \left\{ A(\nabla\mathbf{m})^2 + \epsilon_a + \epsilon_{\mathrm{DM}} - M_s \mathbf{m} \cdot[\mathbf{B}_{\mathrm{st}} + \mathbf{B}(\mathbf{r},t)] \right\}, \tag*{(1)}

where A>0A > 0 is the exchange stiffness constant, m=M/Ms\mathbf{m} = \mathbf{M}/M_s is the normalized magnetization, MsM_s is the saturation magnetization, and ϵa=Kx[1−(m⋅ex)2]\epsilon_a = K_x[1 - (\mathbf{m} \cdot\mathbf{e}_x)^2] is the in-plane easy-axis anisotropy energy density with the effect of magnetostatic interactions being accounted for via a local shape anisotropy contribution to the effective constant Kx>0K_x > 0. We consider two distinct forms of the Dzyaloshinskii-Moriya interaction (DMI) energy density ϵDM\epsilon_{\mathrm{DM}}. For a CnvC_{nv}-symmetric system, which stabilizes asymmetric bimerons [16], it is expressed as

ϵDM=D[mz(∇⋅m)−(m⋅∇)mz],(2)\epsilon_{\mathrm{DM}} = D \left[m_z(\nabla\cdot\mathbf{m}) - (\mathbf{m} \cdot\nabla)m_z\right], \tag*{(2)}

whereas for a D2dD_{2d}-symmetric system, which hosts asymmetric antibimerons [17], it takes the form

ϵDM=D(ex⋅m×∂ym+ey⋅m×∂xm),(3)\epsilon_{\mathrm{DM}} = D \left(\mathbf{e}_x \cdot\mathbf{m} \times\partial_y \mathbf{m} + \mathbf{e}_y \cdot\mathbf{m} \times\partial_x \mathbf{m}\right), \tag*{(3)}

where DD is the DMI constant, whose sign determines the preferred magnetic chirality. The static external magnetic field Bst=Bxex\mathbf{B}_{\mathrm{st}} = B_x\mathbf{e}_x is applied along the easy axis, and B(r,t)\mathbf{B}(\mathbf{r},t) denotes the time-dependent magnetic field of the OV pulse. In the initial state, the film is uniformly magnetized along the +x+x-direction. In our micromagnetic simulations, we adopt the following material parameters: Ms=111M_s = 111 kA m−1^{-1}, A=0.6A = 0.6 pJ m−1^{-1}, D=0.13D = 0.13 mJ m−2^{-2}, and Kx=8.5K_x = 8.5 kJ m−3^{-3}, together with a static magnetic field Bx=40B_x = 40 mT.

To model the structured optical excitation, we represent the OV magnetic field using the focal-plane profiles of LG modes within the paraxial approximation [40]. Within our model, the magnetic component of the OV couples to the magnetization through the Zeeman term in Eq. (1) [47]. At the focal plane (z=0z = 0), its spatial profile is written as

Bm,p(ρ,ϕ)=B0(ρW)∣m∣e−ρ2W2+imϕLp∣m∣(2ρ2W2)es,(4)\mathbf{B}_{m,p}(\rho,\phi) = B_0 \left(\frac{\rho}{W}\right)^{|m|} e^{-\frac{\rho^2}{W^2}+im\phi} L_p^{|m|}\left(\frac{2\rho^2}{W^2}\right)\mathbf{e}_s, \tag*{(4)}

where (ρ,ϕ)(\rho,\phi) are polar coordinates in the film plane, B0B_0 is the amplitude coefficient of the OV magnetic field, WW is the effective size (waist) of the beam, and Lp∣m∣L_p^{|m|} are the generalized Laguerre polynomials. The vector es\mathbf{e}_s represents the polarization state of the OV, with the index ss labeling the polarization-dependent SAM of the optical field. Here, s=0s = 0 denotes linear polarization, which carries no net SAM, whereas s=±1s = \pm1 denote circular polarizations carrying opposite SAM projections along the propagation direction. In this convention, s=+1s = +1 and s=−1s = -1 correspond to left- and right-handed circular polarizations, respectively. The integer mm is the azimuthal index that determines the OAM of the mode, with the phase factor exp⁡(imϕ)\exp(im\phi) describing the azimuthal phase winding, whereas the integer pp is the radial index governing the radial mode structure.

The spatial profiles of representative LG modes are shown in Figure 2. The first and second rows display the real and imaginary parts of the OV magnetic field, Re⁡[Bm,p]\operatorname{Re}[\mathbf{B}_{m,p}] and Im⁡[Bm,p]\operatorname{Im}[\mathbf{B}_{m,p}], respectively, while the third row shows the corresponding intensity ∣Bm,p∣2|\mathbf{B}_{m,p}|^2. For (m,p)=(0,0)(m,p) = (0,0), the field has a Gaussian profile with maximum intensity at the beam center [Figure 2(i)]. For m≠0m \ne0, the factor (ρ/W)∣m∣(\rho/W)^{|m|} forces the field amplitude

Figure 2. Normalized spatial profiles of LG modes at the focal plane (z=0z = 0). The first row, panels (a) to (d), shows the real part Re⁡[Bm,p]\operatorname{Re}[\mathbf{B}_{m,p}] of the OV magnetic field. The second row, panels (e) to (h), shows its imaginary part Im⁡[Bm,p]\operatorname{Im}[\mathbf{B}_{m,p}]. The third row, panels (i) to (l), shows the corresponding intensity ∣Bm,p∣2|\mathbf{B}_{m,p}|^2. The columns correspond to (m,p)=(0,0)(m,p) = (0,0), (1,0)(1,0), (2,0)(2,0), and (2,1)(2,1), respectively. The fields and intensities are normalized to their respective peak values, with the color scales indicated by the colorbars.

to vanish at ρ=0\rho= 0, producing an annular intensity structure Figure 2(j)–(Figure 2l). The azimuthal index mm sets the azimuthal phase winding of the mode: upon encircling the beam center, the phase accumulates 2πm2\pi m, and the real and imaginary field profiles exhibit 2∣m∣2|m| sign changes around the phase singularity. The radial index pp determines the number of radial nodes, resulting in p+1p+1 concentric intensity maxima, as illustrated by the two-ring intensity profile of the (m,p)=(2,1)(m, p) = (2, 1) mode in Figure 2(l). Modes with p=0p = 0 and m=±1m = \pm1 are utilized to study the nucleation of single spin textures, whereas modes with ∣m∣>1|m| > 1 or p>0p > 0 are used to generate multiple spin textures and clusters.

For our micromagnetic studies, we apply a pulsed OV to drive magnetization dynamics. The time-dependent magnetic field of the OV pulse is described by

B(r,t)=g(t)Re⁡[Bm,p(ρ,ϕ)e−iω(t−τ1)].(5)\mathbf{B}(\mathbf{r}, t) = g(t) \operatorname{Re}\left[\mathbf{B}_{m,p}(\rho, \phi)e^{-i\omega(t-\tau_{1})}\right]. \tag*{(5)}

Here ω=2πf\omega= 2\pi f is the angular frequency, r=(ρ,ϕ)\mathbf{r} = (\rho, \phi) is the coordinate in the film plane, and the spatial profile of the vortex field Bm,p(ρ,ϕ)\mathbf{B}_{m,p}(\rho, \phi) is defined in Eq. (4). The smooth time-dependent envelope g(t)g(t) accounts for the consecutive turn-on and turn-off ramps:

g(t)={sin⁡2(πt2τ1),0≤t<τ1,cos⁡2(π(t−τ1)2τ2),τ1≤t<τ1+τ2,0,otherwise,(6)g(t) = \begin{cases} \sin^{2}\left(\frac{\pi t}{2\tau_{1}}\right), & 0 \le t < \tau_{1},\\ \cos^{2}\left(\frac{\pi(t-\tau_{1})}{2\tau_{2}}\right), & \tau_{1} \le t < \tau_{1}+\tau_{2},\\ 0, & \text{otherwise}, \end{cases} \tag*{(6)}

where τ1\tau_{1} and τ2\tau_{2} are the rise and fall times of the pulse, respectively, and the total pulse duration is tpulse=τ1+τ2t_{\mathrm{pulse}} = \tau_{1} + \tau_{2}. The envelope reaches its maximum at t=τ1t = \tau_{1}.

The magnetization dynamics under the OV field is governed by the Landau-Lifshitz-Gilbert equation,

dmdt=γ0Heff×m+αm×dmdt,(7)\frac{d\mathbf{m}}{dt} = \gamma_{0}\mathbf{H}_{\mathrm{eff}} \times\mathbf{m} + \alpha\mathbf{m} \times\frac{d\mathbf{m}}{dt}, \tag*{(7)}

where γ0\gamma_{0} is the gyromagnetic ratio, Heff=−(μ0Ms)−1δF[m]/δm\mathbf{H}_{\mathrm{eff}} = -(\mu_{0}M_{\mathrm{s}})^{-1}\delta F[\mathbf{m}]/\delta\mathbf{m} is the effective magnetic field obtained from the free energy in Eq. (1), with the time-dependent OV field B(r,t)\mathbf{B}(\mathbf{r}, t) defined in Eq. (5), and α\alpha is the Gilbert damping constant. Unless stated otherwise, the simulations are performed for a film with lateral dimensions of 300×300300 \times300 nm2^{2} and a thickness of 2 nm, discretized into 2×2×22 \times2 \times2 nm3^{3} cells with periodic boundary conditions imposed in the film plane. We use a beam waist W=15W = 15 nm, frequency f=0.1f = 0.1 THz, amplitude coefficient B0=10B_{0} = 10 T, pulse fall time τ2=0.5\tau_{2} = 0.5 ps, and damping constant α=0.15\alpha= 0.15.

To study the generation of topological spin textures, we use the following three-stage writing protocol. Prior to the pulse, the magnetization in the film is relaxed into a uniform in-plane state. Then, during the pulse, the spatially inhomogeneous OV field drives rapid nonuniform precessional dynamics. The field amplitude reaches its maximum at t=τ1t = \tau_{1}. After the field is switched off at tpulse=τ1+τ2t_{\mathrm{pulse}} = \tau_{1} + \tau_{2}, the subsequent magnetization evolution is governed by magnetic interactions and Gilbert damping, which relax the driven magnetization configuration either back to the uniform state or quench it into a nontrivial topological texture. Importantly, the optical parameters (s,m,p)(s, m, p) determine the symmetry and characteristic length scales of the transient magnetization pattern, while the subsequent magnetic relaxation stabilizes the resulting topological state as a single bimeron or antibimeron, or as a configuration of multiple spin textures. After full relaxation, the resulting magnetic state is characterized by the topological charge

Q=14π∫dx dy m⋅(∂xm×∂ym),(8)Q = \frac{1}{4\pi}\int dx\,dy\,\mathbf{m}\cdot\left(\partial_{x}\mathbf{m}\times\partial_{y}\mathbf{m}\right), \tag*{(8)}

where for the in-plane systems studied below, nonzero values of QQ characterize single asymmetric bimerons or antibimerons, as well as clusters and other configurations composed of multiple spin textures. For configurations containing multiple textures, QQ represents the net topological charge and may have magnitude greater than one or vanish when textures with opposite charges compensate. Consequently, the value of QQ must be considered together with the spatial magnetization profile when characterizing multicomponent states. Note that the systems with the DMI types given by Eqs. (2) and (3) can host energetically degenerate spin textures with opposite topological charges [17].

The distinction between asymmetric bimerons and asymmetric antimerons is determined by the symmetry of the DMI that stabilizes these noncollinear textures. Both consist of a bound vortex-antivortex pair, but the DMI lifts the energetic equivalence of the two constituents by favoring one over the other. In a CnvC_{nv}-symmetric system, the DMI favors the vortex constituent. The higher-energy antivortex consequently deforms into a crescent-shaped structure surrounding the vortex, thereby forming an asymmetric bimeron. Conversely, in a D2dD_{2d}-symmetric system, the DMI favors the antivortex constituent [17]. The vortex then deforms into a crescent-shaped structure surrounding the antivortex, producing an asymmetric antimeron. Hereafter, asymmetric bimerons and antimerons implicitly denote the textures stabilized by the DMI in Eq. (2) and Eq. (3), respectively.

Generation of single in-plane spin textures

Having established the micromagnetic framework and the writing protocol, we now investigate how the spatial profiles of LG beams, governed by their optical quantum numbers, nucleate in-plane topological spin textures in chiral FM films with CnvC_{nv} (or D2dD_{2d}) symmetry. For the nucleation of single spin textures, we focus on beams with the radial index p=0p = 0 and OAM m=0,±1m = 0, \pm1, considering both linear (s=0s = 0) and circular (s=±1s = \pm1) polarizations.

Figure 3 summarizes the nucleation outcomes under circularly polarized OVs for systems with both DMI types and two signs of the DMI constant DD. Specifically, the topological charge QQ of the nucleated magnetic texture is mapped as a function of the pulse duration tpulset_{\mathrm{pulse}} and the OAM mm. A minimum pulse duration of tpulse=10t_{\mathrm{pulse}} = 10 ps (one optical cycle at f=0.1f = 0.1 THz) is necessary to initiate nucleation, below which no topological transition occurs. For longer durations, the generation of the single texture remains robust across the entire investigated range up to 100 ps. For the CnvC_{nv}-symmetric system, the stabilized configurations are asymmetric bimerons: an incident beam with s=1s = 1 and m=−1m = -1 nucleates a state with Q=1Q = 1 when D>0D > 0 [Fig. 3(a)], whereas reversing the signs to s=−1s = -1 and m=1m = 1 under D<0D < 0 yields a state with Q=−1Q = -1 [Fig. 3(b)]. Conversely, the D2dD_{2d}-symmetric system hosts asymmetric antibimerons: an incident beam with m=1m = 1 and s=1s = 1 stabilizes a state with Q=−1Q = -1 when D>0D > 0 [Fig. 3(c)], whereas a beam with s=−1s = -1 and m=−1m = -1 yields a state with Q=+1Q = +1 when D<0D < 0 [Fig. 3(d)]. Notably, in all cases, a standard Gaussian beam (m=0m = 0) fails to induce a topological transition (Q=0Q = 0).

Nucleation outcome diagrams for circularly polarized OVs

Figure 3. Nucleation outcome diagrams for circularly polarized OVs. The color maps show the topological charge QQ as a function of the pulse duration tpulset_{\mathrm{pulse}} and the OAM mm. Panels (a) and (b) correspond to the CnvC_{nv}-symmetric system hosting asymmetric bimerons for (a) D>0D > 0 with beam polarization s=1s = 1, and (b) D<0D < 0 with s=−1s = -1. Panels (c) and (d) correspond to the D2dD_{2d}-symmetric system hosting asymmetric antibimerons for (c) D>0D > 0 with s=1s = 1, and (d) D<0D < 0 with s=−1s = -1.

The magnetization dynamics illustrated in Figure 4 elucidate the mechanism underlying the distinct nucleation outcomes for right- and left-handed circular polarizations summarized in Figure 3. For a fixed OAM m=1m = 1, the two circular polarization states (s=±1s = \pm1) generate distinct nonuniform magnetization patterns during the OV pulse. As shown in Figure 4(a)–(Figure 4c), an OV pulse with s=−1s = -1 induces a transient vortex pattern, which is required for the subsequent stabilization of an asymmetric bimeron [Figs. 4(d)–(g)]. Conversely, in Figure 4(h)–(Figure 4j), the pulse with s=1s = 1 excites an antivortex configuration that relaxes into an asymmetric antibimeron [Figs. 4(k)–(n)]. These distinct pathways demonstrate that the transient vortex (antivortex) configuration directly determines the subsequent stabilization of bimeron (antibimeron), under the corresponding DMI type in the system. Interestingly, during the postpulse relaxation stage, a reversal of the out-of-plane magnetization is observed within the central cores: the initially positive [mz>0m_z > 0, red in Figure 4(c)] vortex core flips to negative [mz<0m_z < 0, blue in Figure 4(g)] in the final bimeron state, while the initially negative antivortex core in Figure 4(j) switches to positive in Figure 4(n). Finally, as shown in Figure 4, choosing a beam waist WW comparable to the characteristic size of the target spin texture is important. This spatial matching enables the OV pulse to generate a localized transient configuration on the appropriate length scale, allowing it to relax efficiently into a stable asymmetric spin texture.

Figure 4. Nucleation of single in-plane topological spin textures in a chiral FM driven by circularly polarized OVs. The OV pulse carries OAM index m=1m = 1 and has a total duration of tpulse=36.5t_{\mathrm{pulse}} = 36.5 ps. The top row [panels (a)–(g)] corresponds to right-handed circular polarization (s=−1s = -1), leading to the nucleation of an asymmetric bimeron. The bottom row [panels (h)–(n)] corresponds to left-handed circular polarization (s=1s = 1), leading to the nucleation of an asymmetric antibimeron. Panels (a)–(c) and (h)–(j) show the magnetization dynamics during the OV pulse, while panels (d)–(f) and (k)–(m) show the subsequent relaxation after the pulse is switched off, with time reset to t=0t = 0 at the start of the relaxation stage. Panels (g) and (n) show the corresponding final fully relaxed states. The initial state is a uniform in-plane FM state with all spins aligned along the +x+x direction. The color scale represents the out-of-plane component of the magnetization.

Furthermore, the nucleation outcomes shown in Figure 3 reveal an OAM-dependent response governed by the compatibility between the chirality of the OV and the intrinsic chirality of the FM film. The OAM-dependent OV field induces a twist in the magnetization, with the sign of the OAM (m=±1m = \pm1) determining the direction of this twist. The sign of the DMI constant DD sets the intrinsic chirality of the film by energetically favoring a particular rotational sense of the magnetization. Thus, in the presence of DMI, the OV-induced twist either matches or competes with the film’s intrinsic chirality. When the two chiralities are compatible, the transient magnetization pattern can relax into a topological spin texture. In contrast, opposing chiralities prevent stabilization and suppress the topological transition. Therefore, the OAM-sign dependence of the nucleation outcomes can be understood as arising from the competition between optical and material chiralities.

We next consider the nucleation of topological spin textures induced by linearly polarized OVs with s=0s = 0, where the polarization is chosen along the yy-direction. Unlike the circularly polarized case, in which B0=10B_0 = 10 T was sufficient to induce nucleation, the same value of B0B_0 under linear polarization does not produce stable topological textures after relaxation. Therefore, instead of varying the pulse duration, we sweep B0B_0 to determine the threshold for stable nucleation. Figure 5(a) summarizes the nucleation outcomes for m=0m = 0 and m=±1m = \pm1 at a fixed pulse duration of tpulse=10t_{\mathrm{pulse}} = 10 ps. The results show that successful nucleation requires B0≃12B_0 \simeq12 T. This higher threshold arises because a linearly polarized field can be viewed as an equal superposition of the two circularly polarized states with s=±1s = \pm1. Consequently, the net SAM vanishes, suppressing the transient magnetic vortex (or antivortex) that mediates nucleation in the corresponding circularly polarized cases. Instead, the transient states formed during the pulse exhibit magnetization patterns lacking such well-defined structures [see Figs. 5(b) and 5(d)]. Below this threshold, the induced transient magnetization configuration is insufficient to relax into a stable topological texture. Above B0≃12B_0 \simeq12 T, the relaxed state produced by a standard Gaussian beam (m=0m = 0) remains topologically trivial with Q=0Q = 0, whereas vortex beams with m=±1m = \pm1 successfully nucleate corresponding topological spin textures.

Figure 5. (a) Nucleation outcome diagram for linearly polarized OVs. The color map shows the topological charge QQ as a function of the OV magnetic-field amplitude coefficient B0B_0 and OAM mm. (b)–(e) Nucleation of asymmetric bimerons. Panels (b) and (d) show the magnetization states at t=5t=5 ps during the OV pulse for m=1m=1 and m=−1m=-1 at B0=12B_0=12 T and B0=16B_0=16 T, respectively. The corresponding equilibrium states after relaxation are shown in (c), with Q=1Q=1, and in (e), with Q=−1Q=-1. The color in panels (b)–(e) represents the out-of-plane magnetization component.

Crucially, under linear polarization, the topological charge of the nucleated texture directly follows the OAM through the relation Q=mQ = m. An incident beam with m=+1m = +1 produces an equilibrium texture with Q=+1Q = +1 [Fig. 5(c)], whereas a beam with m=−1m = -1 produces a texture with Q=−1Q = -1 [Fig. 5(e)]. This correspondence is independent of the DMI type. The DMI only determines whether the resulting equilibrium state is an asymmetric bimeron or antibimeron, but it does not change its topological charge. Thus, linear polarization enables direct one-to-one encoding of the beam’s OAM into the topological charge of the nucleated spin texture.

Generation of in-plane clusters and multiple spin textures

Asymmetric spin textures, including bimerons and antibimerons, can be stabilized not only as isolated objects but also as clusters [16, 48]. This clustering tendency arises because, unlike symmetric bimerons [8], asymmetric in-plane textures with the same topological charge exhibit an attractive interaction along the direction perpendicular to the easy axis. This attraction promotes the formation of clusters with a broad range of total topological charges QQ. In the following, we show that OV beams with higher OAM (∣m∣>1|m| > 1) or nonzero radial indices (p>0p > 0) can nucleate such clusters, as well as other multicomponent states in which several spin textures coexist.

In Figure 6, we demonstrate the nucleation of various topological states using OV field profiles with OAM ∣m∣>1|m| > 1. Each case is labeled by the optical quantum numbers (s,m,p)(s, m, p). The upper panels show the magnetization patterns generated during the pulse, whereas the lower panels show the corresponding equilibrium states after relaxation. The black arrows indicate the evolution from the transient magnetization state during the pulse to the final relaxed state. We first consider cases in which the OAM of the OV is encoded into the magnetic film as the total topological charge of the nucleated cluster, i.e., Q=mQ = m. For example, an OV profile with (s,m,p)=(0,2,0)(s, m, p) = (0, 2, 0), B0=18B_0 = 18 T, and tpulse=10t_{\mathrm{pulse}} = 10 ps nucleates a bimeron cluster with Q=2Q = 2 [Figure 6(a,Figure 6b)]. Conversely, the (0,−2,0)(0, -2, 0) OV profile with B0=18.5B_0 = 18.5 T and tpulse=10t_{\mathrm{pulse}} = 10 ps nucleates a bimeron cluster with Q=−2Q = -2 [Figure 6(c,Figure 6d)]. This topological encoding also extends to larger OAM values: for the (0,3,0)(0, 3, 0) OV profile with B0=22B_0 = 22 T and tpulse=18.5t_{\mathrm{pulse}} = 18.5 ps nucleates an antibimeron cluster with Q=3Q = 3 [Figure 6(e,Figure 6f)]. These examples show that, by tuning B0B_0 and pulse duration tpulset_{\mathrm{pulse}}, OVs with ∣m∣>1|m| > 1 can

Figure 6. Nucleation of multiple in-plane topological spin textures induced by OVs. For each LG mode (s,m,p)(s,m,p), the upper and lower panels show the magnetization state at t=10t=10 ps and the corresponding equilibrium state after relaxation, respectively. Results are shown for the following modes: (a,b) (0,2,0)(0,2,0), which nucleates a bimeron cluster with Q=2Q=2; (c,d) (0,−2,0)(0,-2,0), which nucleates a bimeron cluster with Q=−2Q=-2; (e,f) (0,3,0)(0,3,0), which nucleates an antibimeron cluster with Q=3Q=3; (g,h) (0,3,0)(0,3,0), which nucleates isolated antibimerons with Q=+1Q=+1 and Q=−1Q=-1; (i,j) (−1,3,0)(-1,3,0), which nucleates an antibimeron cluster with Q=−2Q=-2; and (k,l) (0,3,1)(0,3,1), which nucleates a bimeron cluster with Q=2Q=2 and an isolated bimeron with Q=1Q=1. The color represents the out-of-plane component of the magnetization.

be tailored to nucleate clusters whose total topological charge is exactly equal to the beam OAM.

The need for such precise parameter tuning originates from the spatial structure of OV fields. For beams with ∣m∣>1|m| > 1, the annular field profile splits azimuthally into 2∣m∣2|m| petals of alternating sign and equal magnitude [see, e.g., Figure 2(c)]. Each petal acts as a localized field maximum, creating multiple competing nucleation sites. At a fixed beam waist WW, increasing the OAM index produces sharper spatial gradients within the same area and reduces the size of individual petals below the characteristic length scale of the target spin textures. This length-scale mismatch can suppress nucleation altogether or prevent cluster formation, instead producing decoupled spin textures. An example of this breakdown is shown in Figure 6(g,Figure 6h) for the same (0,3,0)(0, 3, 0) mode used in Figure 6(e,Figure 6f), but with a different pulse configuration: B0=30B_0 = 30 T and tpulse=24.5t_{\mathrm{pulse}} = 24.5 ps. In this case, the OV field nucleates a pair of isolated antibimerons with opposite topological charges, Q=+1Q = +1 and Q=−1Q = -1. The appearance of textures with opposite topological charges reflects complex transient magnetization dynamics, including possible annihilation events, which complicate deterministic control over the final equilibrium state.

Moreover, the clusters tend to align along the yy-axis [see, e.g., Figure 6(f)], whereas OV fields combine a cylindrically symmetric radial envelope with an OAM-controlled azimuthal phase winding [see, e.g., Figure 2(c)]. This symmetry mismatch between the preferred cluster orientation and the structure of the driving field makes the final magnetization state sensitive to additional optical degrees of freedom. For example, changing the SAM and using the (−1,3,0)(-1, 3, 0) mode with B0=30B_0 = 30 T and tpulse=54.5t_{\mathrm{pulse}} = 54.5 ps nucleates an antibimeron cluster with Q=−2Q = -2 [Figure 6(i,Figure 6j)]. Alternatively, introducing a radial node by choosing the (0,3,1)(0, 3, 1) mode with B0=22B_0 = 22 T and tpulse=30.5t_{\mathrm{pulse}} = 30.5 ps produces a concentric multi-ring field profile.

Upon relaxation, this complex spatial pattern evolves into a coexistence state consisting of a Q=2Q=2 bimeron cluster and a single Q=1Q=1 bimeron Figure 6(k,Figure 6l). Thus, although one-to-one encoding of OAM into topological charge is no longer straightforwardly preserved in this regime, the expanded optical parameter space provides access to a rich variety of topological states.

Conclusion

In this work, we have demonstrated a rich and promising approach at the intersection of structured photonics [49] and spintronics for creating in-plane topological spin textures in chiral magnets. Using micromagnetic simulations, we have shown that the spatial structure of OVs provides a direct route for encoding topological charge into these systems. By leveraging control over the optical quantum numbers of the incident LG beams, namely the SAM, OAM, and radial index, we have generated a broad variety of nontrivial topological spin textures, spanning from isolated asymmetric bimerons and antibimerons to their clusters.

For OVs with ∣m∣=1|m|=1, we have achieved the deterministic writing of single asymmetric bimerons or antibimerons, stabilized by the respective DMI allowed under CnvC_{nv} or D2dD_{2d} symmetries. For circularly polarized OVs, the encoding of the beam’s OAM into the topological charge QQ requires matching the SAM and OAM with the magnetic chirality selected by the DMI type and sign. For linearly polarized OVs, the absence of net SAM simplifies the nucleation process, enabling direct encoding in which the topological charge QQ is set by the sign and magnitude of the OAM, independent of the DMI type. For OVs with ∣m∣>1|m| > 1, clusters of spin textures can be generated under appropriate conditions. Fine tuning of the OV parameters allows a direct encoding, where the topological charge exactly matches the OAM, Q=mQ = m. Introducing a nonzero radial index p>0p > 0 or nonzero SAM further enriches this encoding, producing spin textures with diverse topological charges. For combinations of ∣m∣>1|m| > 1 and p>0p > 0, the OV spatial profile may be incompatible with the preferred geometry of the clusters, which tend to elongate along the yy-direction. This mismatch can give rise to distinct topological states, including configurations in which clusters coexist with isolated textures.

In our micromagnetic framework, the optical stimulus is implemented as a pulsed sub-THz optical vortex with a nanoscale beam waist. This choice provides a proof-of-principle implementation in which the beam profile is matched to the characteristic size of the target spin textures. Experimentally, such tight spatial confinement below the far-field diffraction limit may be achieved using near-field optical techniques, including near-field scanning optical microscopy [50, 51], plasmonic antennas [52], or near-field photoconductive antennas [53]. Furthermore, specialized metasurfaces provide another route for generating topologically structured THz fields [54]. Overall, our findings establish structured light as a versatile tool for encoding optical quantum numbers into in-plane spin textures in chiral magnets, offering a pathway toward topology-selective writing for spintronic applications.

Acknowledgments

O.A.T. acknowledges support from the Australian Research Council (Grant No. DP240101062), NCMAS grant, International Excellence Fellowship of KIT, and visiting program of ICC-IMR, Tohoku University (Japan).

References

References

  1. [1]N. Nagaosa and Y. Tokura, Topological properties and dynamics of magnetic skyrmions, Nat. Nanotechnol. 8, 899 (2013).DOI
  2. [2]B. Göbel, I. Mertig, and O. A. Tretjakov, Beyond skyrmions: Review and perspectives of alternative magnetic quasiparticles, Phys. Rev. 895, 1 (2021).DOI
  3. [3]T. H. R. Skyrme, A unified field theory of mesons and baryons, Nucl. Phys. 31, 556 (1962).DOI
  4. [4]A. A. Belavin and A. M. Polyakov, Metastable states of two-dimensional isotropic ferromagnets, JETP Lett. 22, 503 (1975).
  5. [5]A. N. Bogdanov, U. K. Rößler, M. Wolf, and K.-H. Müller, Magnetic structures and reorientation transitions in noncentrosymmetric uniaxial antiferromagnets, Phys. Rev. B 66, 214410 (2002).DOI
  6. [6]S. Mühlbauer, B. Binz, F. Jonietz, C. Pfleiderer, A. Rosch, A. Neubauer, R. Georgii, and P. Böni, Skyrmion lattice in a chiral magnet, Science 323, 915 (2009).DOI
  7. [7]Y. A. Kharkov, O. P. Sushkov, and M. Mostovoy, Bound states of skyrmions and merons near the Lifshitz point, Phys. Rev. Lett. 119, 207201 (2017).DOI
  8. [8]B. Göbel, A. Mook, J. Henk, I. Mertig, and O. A. Tretjakov, Magnetic bimerons as skyrmion analogues in in-plane magnets, Phys. Rev. B 99, 060407 (2019).DOI
  9. [9]N. Gao, S.-G. Je, M.-Y. Im, J. W. Choi, M. Yang, Q. Li, T. Y. Wang, S. Lee, H.-S. Han, K.-S. Lee, W. Chao, C. Hwang, J. Li, and Z. Q. Qiu, Creation and annihilation of topological meron pairs in in-plane magnetized films, Nat. Commun. 10, 5603 (2019).DOI
  10. [10]J. Chen, X. Li, L. Shen, Z. Wang, H. Zhang, A. Litvinenko, J. Åkerman, X. Xu, O. A. Tretiakov, and Y. Zhou, Current-induced dynamics of Bloch domain-wall bimerons, Phys. Rev. B 112, 224420 (2025).arxiv.org/abs/2505.00959
  11. [11]A. Fert, N. Reyren, and V. Cros, Magnetic skyrmions: advances in physics and potential applications, Nat. Rev. Mater. 2, 17031 (2017).DOI
  12. [12]G. Yu, P. Upadhyaya, Q. Shao, H. Wu, G. Yin, X. Li, C. He, W. Jiang, X. Han, P. K. Amiri, and K. L. Wang, Room-temperature skyrmion shift device for memory application, Nano Lett. 17, 261 (2017).DOI
  13. [13]M. M. Rajib, N. Bindal, R. K. Raj, B. K. Kaushik, and J. Atulasimha, Skyrmion-mediated nonvolatile ternary memory, Sci. Rep. 14, 17199 (2024).DOI
  14. [14]A. Fert, V. Cros, and J. Sampaio, Skyrmions on the track, Nat. Nanotechnol. 8, 152 (2013).DOI
  15. [15]J. Sampaio, V. Cros, S. Rohart, A. Thiaville, and A. Fert, Nucleation, stability and current-induced motion of isolated magnetic skyrmions in nanostructures, Nat. Nanotechnol. 8, 839 (2013).DOI
  16. [16]X. Li, L. Shen, Y. Bai, J. Wang, X. Zhang, M. E. J. Xia, O. A. Tretiakov, X. Xu, M. Mruczkiewicz, M. Krawczyk, Y. Xu, R. F. Evans, R. W. Chantrell, and Y. Zhou, Bimeron clusters in chiral antiferromagnets, npj Comput. Mater. 6, 169 (2020).
  17. [17]P. A. Vorobyev, D. Kurebayashi, and O. A. Tretiakov, Asymmetric antimerons: Statics and dynamics, APS Open Sci. 1, 000075 (2026).
  18. [18]S. L. Hurst, Multiple-valued logic—its status and its future, IEEE Trans. Comput. C-33, 1160 (1984).DOI
  19. [19]M. M. Andreev, S. Seo, K.-S. Jung, and J.-H. Park, Looking beyond 0 and 1: Principles and technology of multi-valued logic devices, Adv. Mater. 34, 2108830 (2022).DOI
  20. [20]S. B. Jo, J. Kang, and J. H. Cho, Recent advances on multivalued logic gates: A materials perspective, Adv. Sci. 8, 2004216 (2021).DOI
  21. [21]Y. Zhou, S. Li, X. Liang, and Y. Zhou, Topological spin textures: Basic physics and devices, Adv. Mater. 37, 2312935 (2025).DOI
  22. [22]A. Hrabec, J. Sampaio, M. Belmeguenai, I. Gross, R. Weil, S. M. Chérif, A. Stashkevich, V. Jacques, A. Thiaville, and S. Rohart, Current-induced skyrmion generation and dynamics in symmetric bilayers, Nat. Commun. 8, 15765 (2017).DOI
  23. [23]F. Büttner, I. Lemesh, M. Schneider, B. Pfau, C. M. Günther, P. Hessing, J. Geilhufe, L. Caretta, D. Engel, B. Krüger, J. Viehfaus, S. Eisebitt, and G. S. D. Beach, Field-free deterministic ultrafast creation of magnetic skyrmions by spin–orbit torques, Nat. Nanotechnol. 12, 1040 (2017).DOI
  24. [24]A. Soumyanarayanan, M. Raju, A. L. Gonzalez Oyarce, A. K. C. Tan, M.-Y. Im, A. P. Petrovic, P. Ho, K. H. Khoo, M. Tran, C. K. Gan, F. Ernult, and C. Panagopoulos, Tunable room-temperature magnetic skyrmions in Ir/Fe/Co/Pt multilayers, Nat. Mater. 16, 898 (2017).
  25. [25]K. Fallon, S. Hughes, K. Zeissler, W. Legrand, F. Ajejas, D. Maccariello, S. McFadzean, W. Smith, D. McGrouther, S. Collin, N. Reyren, V. Cros, C. H. Marrows, and S. McVitie, Controlled individual skyrmion nucleation at artificial defects formed by ion irradiation, Small 16, 1907450 (2020).
  26. [26]W. Legrand, D. Maccariello, N. Reyren, K. Garcia, C. Moureaul-Luchaire, S. Collin, K. Bouzehouane, V. Cros, and A. Fert, Room-temperature current-induced generation and motion of sub-100 nm skyrmions, Nano Lett. 17, 2703 (2017).DOI
  27. [27]I. Lemesh, K. Litzius, M. Böttcher, P. Bassirian, N. Kerber, D. Heinze, J. Zázvorka, F. Büttner, L. Caretta, M. Mann, M. Weigand, S. Finizio, J. Raabe, M.-Y. Im, H. Stoll, G. Schütz, B. Dupé, M. Kläui, and G. S. D. Beach, Current-induced skyrmion generation through morphological thermal transitions in chiral ferromagnetic heterostructures, Adv. Mater. 30, 1805461 (2018).
  28. [28]Y. Nii, T. Nakajima, A. Kikkawa, Y. Yamasaki, K. Ohishi, J. Suzuki, Y. Taguchi, T. Arima, Y. Tokura, and Y. Iwasa, Uniaxial stress control of skyrmion phase, Nat. Commun. 6, 8539 (2015).DOI
  29. [29]C. Feng, F. Meng, Y. Wang, J. Jiang, N. Mehmood, Y. Cao, X. Lv, F. Yang, L. Wang, Y. Zhao, S. Xie, Z. Hou, W. Mi, Y. Peng, K. Wang, X. Gao, G. Yu, and J. Liu, Field-free manipulation of skyrmion creation and annihilation by tunable strain engineering, Adv. Funct. Mater. 31, 2008715 (2021).DOI
  30. [30]X. Zhang, Y. Zhou, K. Mee Song, T.-E. Park, J. Xia, M. Ezawa, X. Liu, W. Zhao, G. Zhao, and S. Woo, Skyrmion-electronics: writing, deleting, reading and processing magnetic skyrmions toward spintronic applications, J. Phys. Condens. Matter 32, 143001 (2020).DOI
  31. [31]K. Litzius, J. Lelaiert, P. Bassirian, D. Rodrigues, S. Kromin, I. Lemesh, J. Zázvorka, K.-J. Lee, J. Mulkers, N. Kerber, D. Heinze, N. Keil, R. M. Reeve, M. Weigand, B. Van Waeyenberge, G. Schütz, K. Everschor-Sitte, G. S. D. Beach, and M. Kläui, The role of temperature and drive current in skyrmion dynamics, Nat. Electron. 3, 30 (2020).DOI
  32. [32]D. Kurebayashi and O. A. Tretiakov, Skyrmion nucleation on the surface of a topological insulator, Phys. Rev. Res. 4, 043105 (2022).DOI
  33. [33]W. Jiang, P. Upadhyaya, W. Zhang, G. Yu, M. B. Jungfleisch, F. Y. Fradin, J. E. Pearson, Y. Tserkovnyak, K. L. Wang, O. Heinonen, S. G. E. te Velthuis, and A. Hoffmann, Blowing magnetic skyrmion bubbles, Science 349, 283 (2015).DOI
  34. [34]R. Juge, N. Sisodia, J. U. Larrañaga, Q. Zhang, V. T. Pham, K. G. Rana, B. Sarpi, N. Mille, S. Stanescu, R. Belkhou, M.-A. Mawass, N. Novakovic-Marinkovic, F. Kronast, M. Weigand, J. Gräfe, S. Wintz, S. Finizio, J. Raabe, L. Aballe, M. Foerster, M. Belmeguenai, L. D. Buda-Preibeanu, J. Pelloux-Prayer, J. M. Shaw, H. T. Nembach, L. Ranno, G. Gaudin, and O. Boulle, Skyrmions in synthetic antiferromagnets and their nucleation via electrical current and ultra-fast laser illumination, Nat. Commun. 13, 4807 (2022).DOI
  35. [35]C.-H. Lambert, S. Mangin, B. S. D. C. S. Varaprasad, Y. K. Takahashi, M. Hehn, M. Cinchetti, G. Malinowski, K. Hono, Y. Fainman, M. Aeschlimann, and E. E. Fullerton, All-optical control of ferromagnetic thin films and nanostructures, Science 345, 1337 (2014).
  36. [36]M. Finazzi, M. Savoini, A. R. Khorsand, A. Tsukamoto, A. Itoh, L. Duò, A. Kirilyuk, T. Rasing, and M. Ezawa, Laser-induced magnetic nanostructures with tunable topological properties, Phys. Rev. Lett. 110, 177205 (2013).DOI
  37. [37]W. Koshibae and N. Nagaosa, Creation of skyrmions and antiskyrmions by local heating, Nat. Commun. 5, 5148 (2014).DOI
  38. [38]S.-G. Je, P. Vallobra, T. Srivastava, J.-C. Rojas-Sánchez, T. H. Pham, M. Hehn, G. Malinowski, C. Baraduc, S. Auffret, G. Gaudin, S. Mangin, H. Béa, and O. Boulle, Creation of magnetic skyrmion bubble lattices by ultrafast laser in ultrathin films, Nano Lett. 18, 7362 (2018).DOI
  39. [39]K. Zhu, F. N. Rybakov, Z. Wang, W. Gao, S. Sun, W. Wang, J. Li, H. Tian, O. Eriksson, H. Yang, Y. Zhang, N. S. Kiselev, Z. Li, and J. Li, Light-induced bimerons in a chiral magnet, Nat. Commun. 17, 3185 (2026).
  40. [40]L. Allen, M. W. Beijersbergen, R. J. C. Spreeuw, and J. P. Woerdman, Orbital angular momentum of light and the transformation of Laguerre-Gaussian laser modes, Phys. Rev. A 45, 8185 (1992).
  41. [41]S. Franke-Arnold, L. Allen, and M. Padgett, Advances in optical angular momentum, Laser Photonics Rev. 2, 299 (2008).
  42. [42]Y. Shen, X. Wang, Z. Xie, C. Min, X. Fu, Q. Liu, M. Gong, and X. Yuan, Optical vortices 30 years on: OAM manipulation from topological charge to multiple singularities, Light Sci. Appl. 8, 90 (2019).DOI
  43. [43]H. Fujita and M. Sato, Encoding orbital angular momentum of light in magnets, Phys. Rev. B 96, 060407 (2017).DOI
  44. [44]H. Fujita and M. Sato, Ultrafast generation of skyrmionic defects with vortex beams: Printing laser profiles on magnets, Phys. Rev. B 95, 054421 (2017).DOI
  45. [45]S. H. Guan, Y. Liu, Z. P. Hou, D. Y. Chen, Z. Fan, M. Zeng, X. B. Lu, X. S. Gao, M. H. Qin, and J.-M. Liu, Optically controlled ultrafast dynamics of skyrmion in antiferromagnets, Phys. Rev. B 107, 214429 (2023).DOI
  46. [46]Q. Zhang, S. Lin, and W. Zhang, Skyrmion generation through the chirality interplay of light and magnetism, Commun. Phys. 9, 55 (2026).arxiv.org/abs/2502.16197
  47. [47]Potentially, the electric-field component of the OV may also couple to the magnetization through material-dependent magnetoelectric or spin-orbit mediated mechanisms. In systems with sufficiently strong magnetoelectric response, this coupling could provide an excitation channel comparable to, or stronger than, the direct Zeeman coupling considered here.
  48. [48]P. A. Vorobyev, D. Kurebayashi, and O. A. Tretiakov, Topology-constrained spin-wave modes of asymmetric antibimerons and their clusters, arXiv:2604.09178 (2026).arxiv.org/abs/2604.09178
  49. [49]A. Forbes, M. de Oliveira, and M. R. Dennis, Restricted light, Nat. Photonics 15, 253 (2021).
  50. [50]E. Prinz, M. Hartelt, G. Spektor, M. Orenstein, and M. Aeschlimann, Orbital angular momentum in nanoplasmonic vortices, ACS Photonics 10, 340 (2023).DOI
  51. [51]X. Guo, K. Bertling, B. C. Donose, M. Brüning, A. Cernescu, A. A. Goyvadinov, and A. D. Rakić, Terahertz nanoscopy: Advances, challenges, and the road ahead, Appl. Phys. Rev. 11, 021306 (2024).
  52. [52]R. W. Heeres and V. Zwiller, Subwavelength focusing of light with orbital angular momentum, Nano Lett. 14, 4598 (2014).DOI
  53. [53]A. Tuniz and B. T. Kuhlmey, Subwavelength terahertz imaging via virtual superlensing in the radiating near field, Nat. Commun. 14, 6393 (2023).
  54. [54]L. Niu, X. Feng, X. Zhang, W. Yu, Q. Wang, Y. Lang, Q. Xu, X. Chen, J. Ma, H. Qiu, Y. Shen, W. Zhang, and J. Han, Electric-magnetic-switchable free-space skyrmions in toroidal light pulses via a nonlinear metasurface, Optica 13, 203 (2026).

Paper details

vlnc:W_m4j28tat
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents