betaFeedback

WorksPhysics and Astronomy

A thermodynamically consistent and conservative diffuse-interface model for gas-liquid-solid multiphase flows

Abstract

In this work, a thermodynamically consistent and conservative diffuse-interface model for gas-liquid-solid multiphase flows is proposed. In this model, a novel free energy for the gas-liquid-solid multiphase flows is established according to a ternary phase-field model, and it not only contains the standard bulk and interface free energies for two-phase flows, but also includes some additional terms to reflect the penalty in the solid phase and the wettability on the solid surface. Furthermore, a smooth indicator function of the solid phase is also introduced in the consistent Navier-Stokes equations to achieve a high viscosity in the solid phase and preserve the velocity boundary conditions on the solid surface. Based on the proposed diffuse-interface model, the fluid interface dynamics, the fluid-structure interaction, and the wetting property of the solid surface can be described simply and efficiently. Additionally, the total energy is also proved to be dissipative for the two-phase flows in the stationary geometries. To test the present diffuse-interface model, we develop a consistent and conservative lattice Boltzmann method and conduct some simulations. The numerical results also confirm the energy dissipation and good capability of the proposed diffuse-interface model in the study of two-phase flows in complex geometries and gas-liquid-particle multiphase flows.

Introduction

Gas-liquid-solid multiphase flows are ubiquitous in nature and many industrial processes, such as the rain drops impacting on leaves and the ships ploughing through sea waves [1]. With the development of computer science and scientific computing, the numerical simulation has become an effective tool to reveal the principles of such multiphase flows and to provide guidance on industrial manufacturing processes.

For the complex gas-liquid-solid multiphase flows, there are several common challenges in numerical simulations, i.e., the fluid interfacial dynamics, the fluid-structure interaction (FSI) with moving boundaries, and the contact line dynamics. To track or capture the fluid interface in multiphase flows, there are two categories of methods: the sharp-interface method [2, 3] and the diffuse-interface method [4, 5]. As a diffuse-interface approach, the phase-field model (PFM) [5, 6] has been widely used in the study of the fluid interfacial dynamics in multiphase flows through the fourth-order Cahn-Hilliard (CH) equation [7] or the conservative second-order Allen-Cahn (AC) equation [8] due to the conservation of mass and the no need of explicit interface-tracking. Furthermore, the FSI usually plays an important role in the multiphase flows with moving solid objects, such as particle sedimentation, dynamics of fluttering and tumbling plates [9]. To accurately resolve the FSI problems, a popular numerical tool is the immersed boundary method (IBM) [10, 11], in which the solid boundary is marked by a set of Lagrangian points, and the FSI between the immersed boundary and the neighboring fluid is depicted by introducing an extra force term with the Dirac delta function. Recently, some other effective methods have also been proposed for the FSI problems, for instance, the partially saturated method [12, 13], the volume penalization method [14, 15], and the smoothed profile method (SPM) [16, 17]. In the SPM, a smooth indicator function is introduced to represent the local volume fraction of the solid phase, and the extra force included in the Navier-Stokes (NS) equations is similar to that in the IBM. Additionally, the wettability of the solid surface is also needed to be considered in the gas-liquid-solid multiphase flows, especially for the case with a small capillary number. To describe the wetting property on solid surface, a wetting boundary condition was proposed from the viewpoint of the geometrical relation [18], and it has been widely used in the past years [19, 20]. On the other hand, in the PFM, the wetting boundary condition can be constructed through introducing an additional wall free energy functional [21, 22], which also shows a good performance [23, 24]. However, when the two-phase flows in complex geometries are considered, the discretization of the wetting boundary condition is more complicated. To avoid the direct treatment of wetting boundary condition at complex boundaries, some diffuse domain approaches [25, 26, 27] have been developed in recent years. In these methods, as shown in Figure 1, the boundary conditions at the boundary Γ\Gamma are treated as the source terms in the governing equations on a larger and regular computational domain Ω\Omega. However, the reconstruction of the governing equations or numerical schemes is also an important issue, and some additional treatments are needed. More recently, Hong et al. [28] proposed a phase-field approach to investigate the two-phase flows in complex domains with moving contact lines. In their model, the original boundary integral of wall free energy density for the wettability at the fluid-solid boundary is rewritten as a volume integral in the larger rectangular domain by considering an approximation of the surface delta function, and an additional penalty term is also introduced into the free energy to preserve the mass conservation of the AC equation. However, in this model, the value of the penalty parameter needs to be determined through some numerical tests, and the velocity boundary conditions at the fluid-solid boundary are not preserved in the rectangular domain.

Computational domain showing the fluid domain, solid domain, and interface

Figure 1. The computational domain Ω\Omega is the union of the fluid domain Ωf\Omega_f and the solid domain Ωs\Omega_s, and the interface between these two domains is Γ\Gamma.

To address the above issues for complex gas-liquid-solid flows and consider the FSI and the wettability simultaneously, some diffuse-interface models have been proposed. Shinto [29] presented a phase-field free energy functional for fluid domain and colloid domain, and an additional term is introduced to describe the wetting surface of colloids. In this model, the positive parameter in the additional term must be chosen to be a large value such that the free energy density in colloids exhibits a single-well profile, and the minimum value of the single-well function can control the wettability of the colloid surface. Based on the similar idea, Lecrivain et al. [30, 31, 32, 33] developed some phase-field models to simulate the attachment of particles, the arbitrarily shaped particle at the fluid interface, and the elasto-capillary deformation of a flexible fiber. Additionally, Mino et al. [34, 35] coupled the free energy lattice Boltzmann (LB) method with the improved SPM, and the minimum value of the single-well profile controlling the wettability can be given by a theoretical estimation [36]. More recently, Zheng et al. [37] developed a phase-field based LB equation to simulate gas-liquid-particle fluid dynamics together with the SPM. In their model, the SPM is applied to both the conservative AC equation and the incompressible NS equations, and the contact angle is also determined by an affinity parameter through a cubic polynomial [36]. However, to preserve the mass conservation of the modified AC equation, a remedial strategy should be adopted.

In this paper, we will propose a unified diffuse-interface model for the gas-liquid-solid multiphase flows, where the fluid interfacial dynamics, the FSI, and the wettability of solid surface can be described simply and efficiently. Based on a classical ternary PFM, we develop a novel free energy functional for the gas-liquid-solid multiphase flows, and the free energy functional can be divided into three parts: the first one is the standard form for two-phase flows, the second one is a penalty for the phase-field variable in solid phase, and the third one can reflect the wetting property of solid surface. It is worth noting that the contact angle is explicitly included in the third part of the free energy, instead of using a user-defined control parameter in the previous models [29, 33, 37], and we can show that under some proper approximations, the third part is also consistent with the previous wall energy for two-phase flows [38, 39]. Through minimizing the present free energy functional, one can obtain the conservative fourth-order CH equation for interface capturing. In addition, the FSI between fluid and free solid object can be depicted by a simplified form of the diffuse-interface method [40], and it has the similar form with the IBM and SPM at the leading order.

The rest of this paper is organized as follows. In Section 2, according to a ternary free energy functional, a thermodynamically consistent and conservative PFM for gas-liquid-solid multiphase flows is first proposed, followed by the consistent and conservative NS equations for fluid flows. Then the proposed phase-field-NS system is proved to possess an energy dissipation law for two-phase flows in the stationary geometries, and for the multiphase flows with free rigid particles, the governing equations for particle motion are also introduced. The numerical methods are developed in Section 3, where the LB method is the primary numerical tool for partial differential equations due to its features of simplicity in coding and fully parallel algorithm [41, 42, 43]. In § 4, several typical benchmark problems are adopted to test the proposed diffuse-interface model, and the total energy is also numerically confirmed to be dissipative for two-phase flows in stationary geometries. Furthermore, the present diffuse-interface model is applied to study some complex gas-liquid-solid multiphase flows. Finally, some conclusions are summarized in § 5.

Mathematical model for gas-liquid-solid multiphase flows

Phase-field model for interface capturing

In the phase-field theory for two-phase flows, the free energy density can be given by [5]

f1(ϕ,∇ϕ)=3σ124D(ϕ−1)2(ϕ+1)2+3Dσ1216∣∇ϕ∣2,(1)f_1(\phi,\nabla\phi)=\frac{3\sigma_{12}}{4D}(\phi-1)^2(\phi+1)^2+\frac{3D\sigma_{12}}{16}|\nabla\phi|^2, \tag*{(1)}

where the order parameter ϕ\phi is smoothly changed from 1 in phase 1 to -1 in phase 2, DD is the interface thickness, and σ12\sigma_{12} is the surface tension coefficient between phase 1 and phase 2. Through minimizing the free energy functional, one can obtain the following CH equation,

∂ϕ∂t+∇⋅(ϕu)=∇⋅M∇μϕ,(2)\frac{\partial\phi}{\partial t}+\nabla\cdot(\phi\mathbf{u})=\nabla\cdot M\nabla\mu_\phi, \tag*{(2)}

where MM is the mobility, u\mathbf{u} is the velocity of fluid, μϕ\mu_\phi is the chemical potential and can be obtained by applying the variational operator to the free energy functional.

Furthermore, to extend the PFM to depict multiphase systems, Boyer and Lapuerta [44] elaborately designed the following mix free energy for three-component flows,

E=∫Ω[F(ϕ0,ϕ1,ϕ2)+3D8∑k=02γk∣∇ϕk∣2]dΩ,(3)E=\int_{\Omega}\left[F(\phi_0,\phi_1,\phi_2)+\frac{3D}{8}\sum_{k=0}^{2}\gamma_k|\nabla\phi_k|^2\right]\mathrm{d}\Omega, \tag*{(3)}

where ϕk∈[0,1]\phi_k\in[0,1] represents the volume fraction of phase kk and satisfies ϕ0+ϕ1+ϕ2=1\phi_0+\phi_1+\phi_2=1. The spreading coefficient γk\gamma_k is related to the pairwise symmetric surface tension coefficient σkl\sigma_{kl},

γ0=σ01+σ02−σ12,γ1=σ01+σ12−σ02,γ2=σ02+σ12−σ01,(4)\begin{aligned} \gamma_0 &= \sigma_{01}+\sigma_{02}-\sigma_{12},\\ \gamma_1 &= \sigma_{01}+\sigma_{12}-\sigma_{02},\\ \gamma_2 &= \sigma_{02}+\sigma_{12}-\sigma_{01}, \tag*{(4)} \end{aligned}

and the bulk free energy density is given by [44]

F(ϕ0,ϕ1,ϕ2)=12D[γ02ϕ02(1−ϕ0)2+γ12ϕ12(1−ϕ1)2+γ22ϕ22(1−ϕ2)2].(5)F(\phi_0,\phi_1,\phi_2)=\frac{12}{D}\left[\frac{\gamma_0}{2}\phi_0^2(1-\phi_0)^2+\frac{\gamma_1}{2}\phi_1^2(1-\phi_1)^2+\frac{\gamma_2}{2}\phi_2^2(1-\phi_2)^2\right]. \tag*{(5)}

In this work, we introduce a phase-field variable ϕ=ϕ1−ϕ2\phi=\phi_1-\phi_2, and then obtain the formulas ϕ1=(1−ϕ0+ϕ)/2\phi_1=(1-\phi_0+\phi)/2 and ϕ2=(1−ϕ0−ϕ)/2\phi_2=(1-\phi_0-\phi)/2. Based on these two relations, the three-component mix free energy (3) can be expressed by ϕ0\phi_0, ϕ\phi, and their gradients,

E=E0+E1+E2,E1=∫Ωf1(ϕ,∇ϕ) dΩ,E2=∫Ωf2(ϕ0,ϕ,∇ϕ0,∇ϕ) dΩ,(6)E=E_0+E_1+E_2,\quad E_1=\int_{\Omega}f_1(\phi,\nabla\phi)\,\mathrm{d}\Omega,\quad E_2=\int_{\Omega}f_2(\phi_0,\phi,\nabla\phi_0,\nabla\phi)\,\mathrm{d}\Omega, \tag*{(6)}

where E0E_0 is only the function of ϕ0\phi_0, E1E_1 is related to ϕ\phi and exactly is the integral of the free energy density (1), while f2(ϕ0,ϕ,∇ϕ0,∇ϕ)f_2(\phi_0,\phi,\nabla\phi_0,\nabla\phi) contains the cross terms, and is given by

f2(ϕ0,ϕ,∇ϕ0,∇ϕ)=9σ122Dϕ02ϕ2+3D(σ02−σ01)ϕ0ϕ(ϕ2+ϕ02−1)+3D8(σ02−σ01)∇ϕ0⋅∇ϕ.(7)f_2(\phi_0,\phi,\nabla\phi_0,\nabla\phi)=\frac{9\sigma_{12}}{2D}\phi_0^2\phi^2+\frac{3}{D}(\sigma_{02}-\sigma_{01})\phi_0\phi(\phi^2+\phi_0^2-1)+\frac{3D}{8}(\sigma_{02}-\sigma_{01})\nabla\phi_0\cdot\nabla\phi. \tag*{(7)}

According to the above reformulation of the three-component free energy, we can set ϕ0\phi_0 to be the smooth indicator function of the solid phase when considering the gas-liquid-solid multiphase flows, and develop a novel free energy for the total system where the fluid and solid domains are included (see the diagram in Figure 1),

EF=∫Ω[f1(ϕ,∇ϕ)+f2(ϕ0,ϕ,∇ϕ0,∇ϕ)] dΩ=∫Ω[3σ124D(1−ϕ)2(1+ϕ)2+3Dσ1216∣∇ϕ∣2+9σ122Dϕ02ϕ2+3σ12cos⁡θDϕ0ϕ(ϕ2+ϕ02−1)+3Dσ12cos⁡θ8∇ϕ0⋅∇ϕ] dΩ.(8)\begin{aligned} \mathcal{E}_F=\int_{\Omega}\left[f_1(\phi,\nabla\phi)+f_2(\phi_0,\phi,\nabla\phi_0,\nabla\phi)\right]\,\mathrm{d}\Omega\\ &=\int_{\Omega}\left[\frac{3\sigma_{12}}{4D}(1-\phi)^2(1+\phi)^2+\frac{3D\sigma_{12}}{16}|\nabla\phi|^2+\frac{9\sigma_{12}}{2D}\phi_0^2\phi^2+\frac{3\sigma_{12}\cos\theta}{D}\phi_0\phi(\phi^2+\phi_0^2-1)+\frac{3D\sigma_{12}\cos\theta}{8}\nabla\phi_0\cdot\nabla\phi\right]\,\mathrm{d}\Omega. \tag*{(8)} \end{aligned}

where the Young’s law [45] is adopted, i.e., σ02−σ01=σ12cos⁡θ\sigma_{02}-\sigma_{01}=\sigma_{12}\cos\theta with θ\theta being the contact angle of phase 1 to the solid phase, as shown in Figure 2. Here we note that the proposed free energy can reduce to the standard one for binary flows when solid phase ϕ0\phi_0 disappears. Actually, the free energy density in Eq. (8) can be divided into three parts: the first two terms are the original bulk and interface parts for two-phase flows, the third term can be seen as the penalty of ϕ=0\phi=0 when ϕ0=1\phi_0=1, and the last two terms are related to the wettability on the solid surface.

Three-phase contact diagram

Figure 2. Three-phase contact diagram.

Then the chemical potential can be given by the following variational form,

μϕ=δEFδϕ=3σ12Dϕ(ϕ−1)(ϕ+1)−3Dσ128∇2ϕ+9σ12Dϕ02ϕ+3σ12cos⁡θDϕ0(3ϕ2+ϕ02−1)−3Dσ12cos⁡θ8∇2ϕ0.(9)\mu_\phi=\frac{\delta\mathcal{E}_F}{\delta\phi}=\frac{3\sigma_{12}}{D}\phi(\phi-1)(\phi+1)-\frac{3D\sigma_{12}}{8}\nabla^2\phi+\frac{9\sigma_{12}}{D}\phi_0^2\phi+\frac{3\sigma_{12}\cos\theta}{D}\phi_0(3\phi^2+\phi_0^2-1)-\frac{3D\sigma_{12}\cos\theta}{8}\nabla^2\phi_0. \tag*{(9)}

With the above modified chemical potential μϕ\mu_\phi, the CH equation (2) can be used to describe the gas-liquid-solid multiphase flows with different wetting properties.

In addition, to make a clear explanation of the energy density terms in Eq. (8), we first define a new bulk free energy density,

fb(ϕ,ϕ0)=3σ124D(1−ϕ)2(1+ϕ)2+9σ122Dϕ02ϕ2,(10)f_b(\phi,\phi_0)=\frac{3\sigma_{12}}{4D}(1-\phi)^2(1+\phi)^2+\frac{9\sigma_{12}}{2D}\phi_0^2\phi^2, \tag*{(10)}

and plot it in Figure 3. From this figure, one can see that when ϕ0=0\phi_0 = 0 in fluid domain, the bulk free energy density fbf_b reduces to the original double-well function with two minima located at ϕ=±1\phi= \pm1, while it turns into a single-well profile with the minimum located at ϕ=0\phi= 0 in solid phase when ϕ0=1\phi_0 = 1. These results indicate that the last term in Eq. (10) can be considered as a penalty.

The bulk free energy density

Figure 3. The bulk free energy density.

Furthermore, we also present an analysis on the part of free energy related to the wettability. We now define the following free energy,

Ew=∫Ω[3σ12cos⁡θDϕ0ϕ(ϕ2+ϕ02−1)+3Dσ12cos⁡θ8∇ϕ0⋅∇ϕ]dΩ,(11)\mathcal{E}_w = \int_{\Omega}\left[\frac{3\sigma_{12}\cos\theta}{D}\phi_0\phi\left(\phi^2+\phi_0^2-1\right)+\frac{3D\sigma_{12}\cos\theta}{8}\nabla\phi_0\cdot\nabla\phi\right]\mathrm{d}\Omega, \tag*{(11)}

when the variational operator is used to the above free energy (11), one can obtain

δEw=∫Ω[3σ12cos⁡θDϕ0(3ϕ2+ϕ02−1)−3Dσ12cos⁡θ8∇2ϕ0]δϕdΩ,(12)\delta\mathcal{E}_w = \int_{\Omega}\left[\frac{3\sigma_{12}\cos\theta}{D}\phi_0\left(3\phi^2+\phi_0^2-1\right)-\frac{3D\sigma_{12}\cos\theta}{8}\nabla^2\phi_0\right]\delta\phi\mathrm{d}\Omega, \tag*{(12)}

where the condition nΩ⋅∇ϕ0=0\mathbf{n}_{\Omega}\cdot\nabla\phi_0 = 0 is used. Additionally, we can suppose the indicator function of solid phase ϕ0\phi_0 to be always at the equilibrium state and satisfy a hyperbolic tangent profile ϕ0=[1+tanh⁡(2ζ/D)]/2\phi_0 = [1+\tanh(2\zeta/D)]/2, where ζ\zeta is the signed distance function, then we can get the following relations,

∇2ϕ0=16D2ϕ0(1−ϕ0)(1−2ϕ0),∣∇ϕ0∣=4ϕ0(1−ϕ0)D.(13)\nabla^2\phi_0=\frac{16}{D^2}\phi_0(1-\phi_0)(1-2\phi_0),\qquad\lvert\nabla\phi_0\rvert=\frac{4\phi_0(1-\phi_0)}{D}. \tag*{(13)}

Substituting Eq. (13) into Eq. (12) yields

δEw=∫Ω3σ12cos⁡θ4∣∇ϕ0∣[3ϕ21−ϕ0−3(1−ϕ0)]δϕdΩ.(14)\delta\mathcal{E}_w=\int_{\Omega}\frac{3\sigma_{12}\cos\theta}{4}\lvert\nabla\phi_0\rvert\left[\frac{3\phi^2}{1-\phi_0}-3(1-\phi_0)\right]\delta\phi\mathrm{d}\Omega. \tag*{(14)}

Usually, the surface delta function of the fluid-solid interface can be approximated by ∣∇ϕ0∣\lvert\nabla\phi_0\rvert in a diffuse-interface method, and satisfies ∫Ω∣∇ϕ0∣hdΩ=∫ΓhdA\int_{\Omega}\lvert\nabla\phi_0\rvert h\mathrm{d}\Omega=\int_{\Gamma}h\mathrm{d}A for any smooth function hh. For this reason, the free energy Ew\mathcal{E}_w in Ω\Omega can be written as a boundary integral at the fluid-solid interface Γ\Gamma,

Ew=3∫Γψw(ϕ,ϕ0)dA,ψw(ϕ,ϕ0)=σ01+σ022[3ϕ(1−ϕ0)−ϕ31−ϕ0]−σ124[3ϕ(1−ϕ0)−ϕ31−ϕ0]cos⁡θ.(15)\mathcal{E}_w=3\int_{\Gamma}\psi_w(\phi,\phi_0)\mathrm{d}A,\qquad\psi_w(\phi,\phi_0)=\frac{\sigma_{01}+\sigma_{02}}{2}\left[3\phi(1-\phi_0)-\frac{\phi^3}{1-\phi_0}\right]-\frac{\sigma_{12}}{4}\left[3\phi(1-\phi_0)-\frac{\phi^3}{1-\phi_0}\right]\cos\theta. \tag*{(15)}

Here one can observe that when ϕ0=0\phi_0 = 0, the above energy density ψw\psi_w is consistent with the standard wall energy function for wettability in two-phase flows [38, 39]. In other words, the free energy (11) of present diffuse-interface model can accurately control the wettability on solid surface.

The incompressible Navier-Stokes equations for fluid flows

To describe the fluid flows, the following consistent and conservative NS equations are applied,

∇⋅u=0,(16)\nabla\cdot\mathbf{u} = 0, \tag*{(16)}
∂(ρu)∂t+∇⋅[(ρu−S)u]=−∇P+∇⋅{μ1−ϕ0[∇u+(∇u)T]}+μϕ∇ϕ+ρf+Fb,(17)\frac{\partial(\rho\mathbf{u})}{\partial t} + \nabla\cdot[(\rho\mathbf{u} - \mathbf{S})\mathbf{u}] = -\nabla P + \nabla\cdot\left\{\frac{\mu}{1-\phi_0}[\nabla\mathbf{u} + (\nabla\mathbf{u})^{\mathsf{T}}]\right\} + \mu_{\phi}\nabla\phi+ \rho\mathbf{f} + \mathbf{F}_b, \tag*{(17)}

where PP is the pressure, the dynamic viscosity μ\mu is modified by including the term of 1−ϕ01-\phi_0 to achieve a high viscosity in the solid phase with ϕ0=1\phi_0 = 1 and a normal viscosity in fluid region when ϕ0=0\phi_0 = 0. The fluid density ρ\rho and the viscosity μ\mu are usually related to the order parameter by

ρ=ρ1−ρ22ϕ+ρ1+ρ22,(18)\rho= \frac{\rho_1-\rho_2}{2}\phi+ \frac{\rho_1+\rho_2}{2}, \tag*{(18)}
μ=μ1−μ22ϕ+μ1+μ22,(19)\mu= \frac{\mu_1-\mu_2}{2}\phi+ \frac{\mu_1+\mu_2}{2}, \tag*{(19)}

where ρ1\rho_1, μ1\mu_1 as well as ρ2\rho_2 and μ2\mu_2 are the material properties of the pure fluid 1 and fluid 2, respectively. The mass diffusion flux between two phases is given by S=M∇μϕ(ρ1−ρ2)/2\mathbf{S} = M\nabla\mu_{\phi}(\rho_1-\rho_2)/2 according to the phase-field equation (2), μϕ∇ϕ\mu_{\phi}\nabla\phi is the surface tension force, ρf\rho\mathbf{f} is the force caused by the FSI, and Fb\mathbf{F}_b is other body force, such as the gravity. We would like to point out that with above definition of the consistent mass flux, the conservative NS equations (16) satisfy the consistency of reduction, the consistency of mass and momentum transport, and the consistency of mass conservation [46, 47, 48].

In addition, it should be noted that when the solid object is free moving at the fluid interface, such as gas-liquid-particle multiphase flows, an additional force μϕ0∇ϕ0\mu_{\phi_0}\nabla\phi_0 should be included with μϕ0\mu_{\phi_0} being given by

μϕ0=∂EF∂ϕ0=9σ12Dϕ0ϕ2+3σ12cos⁡θDϕ(3ϕ02+ϕ2−1)−3Dσ12cos⁡θ8∇2ϕ.(20)\mu_{\phi_0} = \frac{\partial\mathcal{E}_F}{\partial\phi_0} = \frac{9\sigma_{12}}{D}\phi_0\phi^2 + \frac{3\sigma_{12}\cos\theta}{D}\phi(3\phi_0^2+\phi^2-1) - \frac{3D\sigma_{12}\cos\theta}{8}\nabla^2\phi. \tag*{(20)}

Here one can also find from Eq. (20) that for the particle flows in a single-phase homogeneous medium, i.e., ϕ=0\phi= 0, above chemical potential μϕ0\mu_{\phi_0} becomes zero and thus the additional force μϕ0∇ϕ0\mu_{\phi_0}\nabla\phi_0 disappears.

The energy dissipation law

Now we will show the second law of thermodynamics of the phase-field-NS system for the two-phase flows in the stationary geometries. The second law of thermodynamics states that the total energy of an isothermal multiphase system, including both the free energy and kinetic energy, is not increasing without any external energy input.

We denote the total energy of the system to be Etotal=EF+EK\mathcal{E}_{\mathrm{total}} = \mathcal{E}_F + \mathcal{E}_K, where EK=∫ΩeKdΩ\mathcal{E}_K = \int_{\Omega} e_K\mathrm{d}\Omega is the kinetic energy with energy density defined by eK=ρu2/2e_K = \rho u^2/2.

Theorem 1. The phase-field-NS system [Eqs. (2), (9) and (16)] possesses the following energy dissipation law,

dEtotaldt=−∫Ω{M∇μϕ⋅∇μϕ+μ2(1−ϕ0)[∇u+(∇u)T]⋅[∇u+(∇u)T]}dΩ≤0.(21)\frac{\mathrm{d}\mathcal{E}_{\mathrm{total}}}{\mathrm{d}t} = -\int_{\Omega}\left\{M\nabla\mu_{\phi}\cdot\nabla\mu_{\phi} + \frac{\mu}{2(1-\phi_0)}[\nabla\mathbf{u}+(\nabla\mathbf{u})^{\mathsf{T}}]\cdot[\nabla\mathbf{u}+(\nabla\mathbf{u})^{\mathsf{T}}]\right\}\mathrm{d}\Omega\le0. \tag*{(21)}

Proof. Performing the dot product between u\mathbf{u} and the momentum equation (16b), one can obtain the following expression,

u⋅{∂(ρu)∂t+∇⋅[(ρu−S)u]}=∂eK∂t+∇⋅[(ρu−S)u⋅u2]+u⋅u2[∂ρ∂t+∇⋅(ρu−S)]=−∇⋅(Pu)+∇⋅{μ1−ϕ0[∇u+(∇u)T]⋅u}−μ2(1−ϕ0)[∇u+(∇u)T] ⁣: ⁣[∇u+(∇u)T]+μϕ∇ϕ⋅u+(ρf+Fb)⋅u.\begin{aligned} \mathbf{u}\cdot\left\{\frac{\partial(\rho\mathbf{u})}{\partial t}+\nabla\cdot[(\rho\mathbf{u}-\mathbf{S})\mathbf{u}]\right\}=\frac{\partial e_K}{\partial t}+\nabla\cdot\left[(\rho\mathbf{u}-\mathbf{S})\frac{\mathbf{u}\cdot\mathbf{u}}{2}\right]+\frac{\mathbf{u}\cdot\mathbf{u}}{2}\left[\frac{\partial\rho}{\partial t}+\nabla\cdot(\rho\mathbf{u}-\mathbf{S})\right] \\ &=-\nabla\cdot(P\mathbf{u})+\nabla\cdot\left\{\frac{\mu}{1-\phi_0}[\nabla\mathbf{u}+(\nabla\mathbf{u})^{\mathsf{T}}]\cdot\mathbf{u}\right\}-\frac{\mu}{2(1-\phi_0)}[\nabla\mathbf{u}+(\nabla\mathbf{u})^{\mathsf{T}}]\!:\![\nabla\mathbf{u}+(\nabla\mathbf{u})^{\mathsf{T}}]+\mu_{\phi}\nabla\phi\cdot\mathbf{u}+(\rho\mathbf{f}+\mathbf{F}_b)\cdot\mathbf{u}. \end{aligned}

Here the last term on the right-hand side of the first line in the above equation is zero according to the mass conservation from CH equation. Therefore, the variation of the kinetic energy can be given by

dEKdt=∫Ω∂eK∂t dΩ=∫∂Ω{(ρu−S)u⋅u2−Pu+μ1−ϕ0[∇u+(∇u)T]⋅u}⋅ds+∫Ω(ρf+Fb)⋅u dΩ+∫Ωμϕ∇ϕ⋅u dΩ−∫Ωμ2(1−ϕ0)[∇u+(∇u)T]:[∇u+(∇u)T] dΩ.(22)\begin{aligned} \frac{\mathrm{d}\mathcal{E}_{K}}{\mathrm{d}t} &= \int_{\Omega}\frac{\partial e_{K}}{\partial t}\,\mathrm{d}\Omega\\ &= \int_{\partial\Omega}\left\{(\rho\mathbf{u}-\mathbf{S})\frac{\mathbf{u}\cdot\mathbf{u}}{2}-P\mathbf{u}+\frac{\mu}{1-\phi_{0}}\left[\nabla\mathbf{u}+(\nabla\mathbf{u})^{\mathrm{T}}\right]\cdot\mathbf{u}\right\}\cdot\mathrm{d}\mathbf{s}+\int_{\Omega}(\rho\mathbf{f}+\mathbf{F}_{b})\cdot\mathbf{u}\,\mathrm{d}\Omega\\ &\quad+\int_{\Omega}\mu_{\phi}\nabla\phi\cdot\mathbf{u}\,\mathrm{d}\Omega-\int_{\Omega}\frac{\mu}{2(1-\phi_{0})}\left[\nabla\mathbf{u}+(\nabla\mathbf{u})^{\mathrm{T}}\right]:\left[\nabla\mathbf{u}+(\nabla\mathbf{u})^{\mathrm{T}}\right]\,\mathrm{d}\Omega. \tag*{(22)} \end{aligned}

Similarly, the following relations can be derived by multiplying μϕ\mu_{\phi} and ∂tϕ\partial_{t}\phi to the CH equation (2) and the chemical potential (9), respectively,

μϕ∂tϕ=−μϕu⋅∇ϕ−M∇μϕ⋅∇μϕ+∇⋅(Mμϕ∇μϕ),(23)\mu_{\phi}\partial_{t}\phi=-\mu_{\phi}\mathbf{u}\cdot\nabla\phi-M\nabla\mu_{\phi}\cdot\nabla\mu_{\phi}+\nabla\cdot\left(M\mu_{\phi}\nabla\mu_{\phi}\right), \tag*{(23)}
μϕ∂tϕ=∂tϕ[3σ12Dϕ(ϕ−1)(ϕ+1)+9σ12Dϕ02ϕ+3σ12cos⁡θDϕ0(3ϕ2+ϕ02−1)]−3Dσ128∇⋅[∂tϕ(∇ϕ+cos⁡θ∇ϕ0)]+3Dσ128∇(∂tϕ)⋅(∇ϕ+cos⁡θ∇ϕ0),(24)\begin{aligned} \mu_{\phi}\partial_{t}\phi={}&\partial_{t}\phi\left[\frac{3\sigma_{12}}{D}\phi(\phi-1)(\phi+1)+\frac{9\sigma_{12}}{D}\phi_{0}^{2}\phi+\frac{3\sigma_{12}\cos\theta}{D}\phi_{0}(3\phi^{2}+\phi_{0}^{2}-1)\right] \\ &-\frac{3D\sigma_{12}}{8}\nabla\cdot\left[\partial_{t}\phi(\nabla\phi+\cos\theta\nabla\phi_{0})\right]+\frac{3D\sigma_{12}}{8}\nabla(\partial_{t}\phi)\cdot(\nabla\phi+\cos\theta\nabla\phi_{0}), \tag*{(24)} \end{aligned}

where the incompressible condition (16a) is applied. With the help of above equations, the variation of free energy can be expressed as

dEFdt=ddt∫Ω[f1(ϕ,∇ϕ)+f2(ϕ0,ϕ,∇ϕ0,∇ϕ)] dΩ=∫Ω{∂tϕ[3σ12Dϕ(ϕ−1)(ϕ+1)+9σ12Dϕ02ϕ+3σ12cos⁡θDϕ0(3ϕ2+ϕ02−1)]+3Dσ128∇(∂tϕ)⋅(∇ϕ+cos⁡θ∇ϕ0)} dΩ=∫Ω{∂tϕμϕ+3Dσ128∇⋅[∂tϕ(∇ϕ+cos⁡θ∇ϕ0)]} dΩ=∫∂Ω[Mμϕ∇μϕ+3Dσ128∂tϕ(∇ϕ+cos⁡θ∇ϕ0)]⋅ds−∫Ωμϕu⋅∇ϕ dΩ−∫ΩM∇μϕ⋅∇μϕ dΩ.(25)\begin{aligned} \frac{\mathrm{d}\mathcal{E}_{F}}{\mathrm{d}t} &=\frac{\mathrm{d}}{\mathrm{d}t}\int_{\Omega}\left[f_{1}(\phi,\nabla\phi)+f_{2}(\phi_{0},\phi,\nabla\phi_{0},\nabla\phi)\right]\,\mathrm{d}\Omega\\ &=\int_{\Omega}\left\{\partial_{t}\phi\left[\frac{3\sigma_{12}}{D}\phi(\phi-1)(\phi+1)+\frac{9\sigma_{12}}{D}\phi_{0}^{2}\phi+\frac{3\sigma_{12}\cos\theta}{D}\phi_{0}(3\phi^{2}+\phi_{0}^{2}-1)\right]+\frac{3D\sigma_{12}}{8}\nabla(\partial_{t}\phi)\cdot(\nabla\phi+\cos\theta\nabla\phi_{0})\right\}\,\mathrm{d}\Omega\\ &=\int_{\Omega}\left\{\partial_{t}\phi\mu_{\phi}+\frac{3D\sigma_{12}}{8}\nabla\cdot\left[\partial_{t}\phi(\nabla\phi+\cos\theta\nabla\phi_{0})\right]\right\}\,\mathrm{d}\Omega\\ &=\int_{\partial\Omega}\left[M\mu_{\phi}\nabla\mu_{\phi}+\frac{3D\sigma_{12}}{8}\partial_{t}\phi(\nabla\phi+\cos\theta\nabla\phi_{0})\right]\cdot\mathrm{d}\mathbf{s}-\int_{\Omega}\mu_{\phi}\mathbf{u}\cdot\nabla\phi\,\mathrm{d}\Omega-\int_{\Omega}M\nabla\mu_{\phi}\cdot\nabla\mu_{\phi}\,\mathrm{d}\Omega. \tag*{(25)} \end{aligned}

Finally, when all boundary integrals vanish with some proper boundary conditions, and the other body forces are ignored except for the pressure gradient, the time derivative of the total energy can be written as

dEtotaldt=dEFdt+dEKdt=−∫Ω{M∇μϕ⋅∇μϕ+μ2(1−ϕ0)[∇u+(∇u)T]:[∇u+(∇u)T]} dΩ≤0,(26)\frac{\mathrm{d}\mathcal{E}_{\mathrm{total}}}{\mathrm{d}t}=\frac{\mathrm{d}\mathcal{E}_{F}}{\mathrm{d}t}+\frac{\mathrm{d}\mathcal{E}_{K}}{\mathrm{d}t}=-\int_{\Omega}\left\{M\nabla\mu_{\phi}\cdot\nabla\mu_{\phi}+\frac{\mu}{2(1-\phi_{0})}\left[\nabla\mathbf{u}+(\nabla\mathbf{u})^{\mathrm{T}}\right]:\left[\nabla\mathbf{u}+(\nabla\mathbf{u})^{\mathrm{T}}\right]\right\}\,\mathrm{d}\Omega\leq0, \tag*{(26)}

where Eqs. (22) and (24) are adopted. The proof is complete.

Governing equations for free rigid particles

When free rigid particles are considered in the multiphase flows, the following governing equations for particle motion are also needed,

Mpdupdt=Ff+Ffin+(1−ρρp)Mpg,(27)M_{p}\frac{\mathrm{d}\mathbf{u}_{p}}{\mathrm{d}t}=\mathbf{F}_{f}+\mathbf{F}_{f}^{\mathrm{in}}+\left(1-\frac{\rho}{\rho_{p}}\right)M_{p}\mathbf{g}, \tag*{(27)}
Ipdωpdt=Tf+Tfin,(28)I_{p}\frac{\mathrm{d}\boldsymbol{\omega}_{p}}{\mathrm{d}t}=\mathbf{T}_{f}+\mathbf{T}_{f}^{\mathrm{in}}, \tag*{(28)}
dxpdt=up,(29)\frac{\mathrm{d}\mathbf{x}_p}{\mathrm{d}t}=\mathbf{u}_p, \tag*{(29)}

where MpM_p and IpI_p are the mass and rotational inertia of the particle, ρp\rho_p is the particle density, xp\mathbf{x}_p is the mass center of the particle, up\mathbf{u}_p is the corresponding translational velocity of the centroid and ωp\boldsymbol{\omega}_p is the angular velocity. g\mathbf{g} is the gravity acceleration, Ff\mathbf{F}_f and Tf\mathbf{T}_f are the hydrodynamic force and torque, and they are related to the force ρf\rho\mathbf{f},

Ff=−∫Ωρf dΩ,Tf=−∫Ω(x−xp)×ρf dΩ.(30)\mathbf{F}_f=-\int_{\Omega}\rho\mathbf{f}\,\mathrm{d}\Omega,\qquad\mathbf{T}_f=-\int_{\Omega}(\mathbf{x}-\mathbf{x}_p)\times\rho\mathbf{f}\,\mathrm{d}\Omega. \tag*{(30)}

In addition, as introduced in some IBMs [49, 50], the force and torque Ffin\mathbf{F}^{\mathrm{in}}_f and Tfin\mathbf{T}^{\mathrm{in}}_f are the corrections to the internal fluid effect that compel the velocity of the artificial fluid inside the particle to be consistent with the translational and rotational velocities of the particle [49],

Ffin=ddt∫Vpρu dVp=ρVpdudt=ρVpdupdt,Tfin=ddt∫VpIfωf dVp=Ifdωfdt=Ifdωpdt,(31)\mathbf{F}^{\mathrm{in}}_f=\frac{\mathrm{d}}{\mathrm{d}t}\int_{V_p}\rho\mathbf{u}\,\mathrm{d}V_p=\rho V_p\frac{\mathrm{d}\mathbf{u}}{\mathrm{d}t}=\rho V_p\frac{\mathrm{d}\mathbf{u}_p}{\mathrm{d}t},\qquad\mathbf{T}^{\mathrm{in}}_f=\frac{\mathrm{d}}{\mathrm{d}t}\int_{V_p}I_f\boldsymbol{\omega}_f\,\mathrm{d}V_p=I_f\frac{\mathrm{d}\boldsymbol{\omega}_f}{\mathrm{d}t}=I_f\frac{\mathrm{d}\boldsymbol{\omega}_p}{\mathrm{d}t}, \tag*{(31)}

where VpV_p is the volume of the particle, IfI_f is the moment of inertia for internal fluid, and can be calculated by If=Ipρ/ρpI_f=I_p\rho/\rho_p.

Numerical methods

In this section, we will present numerical methods for the mathematical models mentioned above. For the governing equations for particle motion in § 2.4, the first-order explicit Euler scheme is applied, and the details are not shown here. In the following, the multiple-relaxation-time (MRT) LB models for phase and flow fields are presented. The general evolution equation of LB method for convection-diffusion and NS equations can be written as [51, 52]

fi,k(x+ciΔt,t+Δt)=fi,k(x,t)−Λijk[fj,k(x,t)−fj,keq(x,t)]+Δt(δij−Λijk2)Fj,k,(32)f_{i,k}(\mathbf{x}+\mathbf{c}_i\Delta t,t+\Delta t)=f_{i,k}(\mathbf{x},t)-\Lambda_{ij}^{k}\left[f_{j,k}(\mathbf{x},t)-f_{j,k}^{\mathrm{eq}}(\mathbf{x},t)\right]+\Delta t\left(\delta_{ij}-\frac{\Lambda_{ij}^{k}}{2}\right)F_{j,k}, \tag*{(32)}

where fi,k(x,t)f_{i,k}(\mathbf{x},t) is the distribution function at position x\mathbf{x} and time tt along the ii-th direction in the discrete velocity space (k=1,2,⋯k=1,2,\cdots for different fields), fi,keq(x,t)f_{i,k}^{\mathrm{eq}}(\mathbf{x},t) is the corresponding equilibrium distribution function, and Fi,k(x,t)F_{i,k}(\mathbf{x},t) is the distribution function of source/force term. ci\mathbf{c}_i is the lattice speed, Δt\Delta t is the time step, and Λk=(Λijk)\boldsymbol{\Lambda}^{k}=(\Lambda_{ij}^{k}) represents an invertible collision matrix.

It is worth noting that through properly choosing some specific moments of the distribution functions fi,keqf_{i,k}^{\mathrm{eq}} and Fi,kF_{i,k}, and the relation between the characteristic parameter in the governing equation and an eigenvalue of the collision matrix, one can get the LB models for different macroscopic equations via some asymptotic analysis methods, such as the direct Taylor expansion or Chapman-Enskog analysis.

Lattice Boltzmann model for phase field

Similar to the LB model for CH equation in some previous works [53, 54], the equilibrium and source distribution functions are expressed as

fi,1eq={ϕ+(ωi−1)ημϕ,i=0,ωiημϕ+ωici⋅ϕu/cs2,i≠0,Fi,1=ωici⋅∂t(ϕu)cs2,(33)f_{i,1}^{\mathrm{eq}}= \begin{cases} \phi+(\omega_i-1)\eta\mu_\phi, & i=0,\\ \omega_i\eta\mu_\phi+\omega_i\mathbf{c}_i\cdot\phi\mathbf{u}/c_s^2, & i\ne0, \end{cases} \qquad F_{i,1}=\frac{\omega_i\mathbf{c}_i\cdot\partial_t(\phi\mathbf{u})}{c_s^2}, \tag*{(33)}

where ωi\omega_i is the weight coefficient, csc_s is the lattice sound speed, and η\eta represents an adjustable parameter.

Through the direct Taylor expansion under the general LB framework [51, 52], Eq. (2) can be correctly recovered from the LB evolution equation with the relation M=(1/s1ϕ−1/2)ηcs2ΔtM=(1/s_{1\phi}-1/2)\eta c_s^2\Delta t, where s1ϕs_{1\phi} is an eigenvalue of the collision matrix Λ\boldsymbol{\Lambda}. Finally, the order parameter is computed by

ϕ=∑ifi,1.(34)\phi=\sum_i f_{i,1}. \tag*{(34)}

Lattice Boltzmann model for flow field

To derive the incompressible NS equations, the equilibrium distribution function for the flow field is designed as

fi,2eq=λi+ωici⋅ρucs2+ωi[(ciαciα−cs2)(ρuαuα−Sαuα)c2cs2−cs4+ciαciαˉcs4(ρuαuαˉ−Sαuαˉ+uαSαˉ2)],(35)f_{i,2}^{\mathrm{eq}}=\lambda_i+\frac{\omega_i\mathbf{c}_i\cdot\rho\mathbf{u}}{c_s^2}+\omega_i\left[\frac{(c_{i\alpha}c_{i\alpha}-c_s^2)(\rho u_\alpha u_\alpha-S_\alpha u_\alpha)}{c^2c_s^2-c_s^4}+\frac{c_{i\alpha}c_{i\bar{\alpha}}}{c_s^4}\left(\rho u_\alpha u_{\bar{\alpha}}-\frac{S_\alpha u_{\bar{\alpha}}+u_\alpha S_{\bar{\alpha}}}{2}\right)\right], \tag*{(35)}

where λ0=(ω0−1)P/cs2\lambda_0=(\omega_0-1)P/c_s^2, λi=ωiP/cs2\lambda_i=\omega_iP/c_s^2 (i≠0i\ne0), α=1,2,…,d\alpha=1,2,\ldots,d, α<αˉ≤d\alpha<\bar{\alpha}\le d with dd being the dimensionality, c=Δx/Δtc=\Delta x/\Delta t, and Δx\Delta x is the lattice spacing. Here the two terms in the square bracket correspond to the diagonal and non-diagonal parts of the momentum flux, respectively. In addition, the distribution function of force term can be given by

Fi,2=ωi[u⋅∇ρ+ci⋅(F+ρf)cs2+(ciαciα−cs2)Mαα2Fc2cs2−cs4+ciαciαˉMααˉ2Fcs4],(36)F_{i,2}=\omega_i\left[\mathbf{u}\cdot\nabla\rho+\frac{\mathbf{c}_i\cdot(\mathbf{F}+\rho\mathbf{f})}{c_s^2}+\frac{(c_{i\alpha}c_{i\alpha}-c_s^2)M_{\alpha\alpha}^{2F}}{c^2c_s^2-c_s^4}+\frac{c_{i\alpha}c_{i\bar{\alpha}}M_{\alpha\bar{\alpha}}^{2F}}{c_s^4}\right], \tag*{(36)}

where F=μϕ∇ϕ+μϕ0∇ϕ0+Fb+Fc\mathbf{F}=\mu_\phi\nabla\phi+\mu_{\phi_0}\nabla\phi_0+\mathbf{F}_b+\mathbf{F}_c, Fc=∇⋅(Su−uS)/2\mathbf{F}_c=\nabla\cdot(\mathbf{S}\mathbf{u}-\mathbf{u}\mathbf{S})/2 is a corrected force term to recover the consistent momentum equation (17), and the tensor Mαβ2FM_{\alpha\beta}^{2F} is defined by

M2F=∂t(ρuu−Su+uS2)+cs2∇ρ u+cs2(∇ρ)u+(c2−3cs2)(u⋅∇ρ)I.(37)\mathbf{M}_{2F}=\partial_t\left(\rho\mathbf{u}\mathbf{u}-\frac{\mathbf{S}\mathbf{u}+\mathbf{u}\mathbf{S}}{2}\right)+c_s^2\nabla\rho\,\mathbf{u}+c_s^2(\nabla\rho)\mathbf{u}+(c^2-3c_s^2)(\mathbf{u}\cdot\nabla\rho)\mathbf{I}. \tag*{(37)}

Based on above expressions, the NS equations (16) can be correctly recovered with the following relation [52],

μρ(1−ϕ0)=(1s2a−12)c2−cs22Δt=(1s2b−12)cs2Δt,(38)\frac{\mu}{\rho(1-\phi_0)}=\left(\frac{1}{s_{2a}}-\frac{1}{2}\right)\frac{c^2-c_s^2}{2}\Delta t=\left(\frac{1}{s_{2b}}-\frac{1}{2}\right)c_s^2\Delta t, \tag*{(38)}

where s2as_{2a} and s2bs_{2b} are two relaxation parameters, and will be stated below.

Finally, the macroscopic velocity and pressure are calculated by

u∗=1ρ∑icifi,2+Δt2ρF,(39)\mathbf{u}^*=\frac{1}{\rho}\sum_i\mathbf{c}_if_{i,2}+\frac{\Delta t}{2\rho}\mathbf{F}, \tag*{(39)}
u=u∗+Δt2f,P=cs21−ω0[∑i≠0fi,2+(12+H)Δtu⋅∇ρ−ω0(ρu−S)⋅uc2−cs2+Kc2Δt2∂t(ρu⋅u−S⋅u)],(40)\mathbf{u}=\mathbf{u}^*+\frac{\Delta t}{2}\mathbf{f},\qquad P=\frac{c_s^2}{1-\omega_0}\left[\sum_{i\ne0}f_{i,2}+\left(\frac{1}{2}+H\right)\Delta t\mathbf{u}\cdot\nabla\rho-\omega_0\frac{(\rho\mathbf{u}-\mathbf{S})\cdot\mathbf{u}}{c^2-c_s^2}+\frac{K}{c^2}\frac{\Delta t}{2}\partial_t(\rho\mathbf{u}\cdot\mathbf{u}-\mathbf{S}\cdot\mathbf{u})\right], \tag*{(40)}

where u∗\mathbf{u}^* is the velocity without considering the fluid-solid interaction, u\mathbf{u} is the corrected velocity. The force f\mathbf{f} can be discretized by ϕ0(us−u∗)/Δt\phi_0(\mathbf{u}_s-\mathbf{u}^*)/\Delta t with us=up+ωp×(x−xp)\mathbf{u}_s=\mathbf{u}_p+\boldsymbol{\omega}_p\times(\mathbf{x}-\mathbf{x}_p) being the velocity of the solid point. KK and HH are two factors, for instance, K=1−d0K=1-d_0 and H=K[(1−d0)/s0−(2−4d0)/s2a+(1−3d0)/2]H=K[(1-d_0)/s_0-(2-4d_0)/s_{2a}+(1-3d_0)/2] for two-dimensional problem, while for three-dimensional case, K=1−2d0K=1-2d_0 and H=K[(1−d0)/s0−(3−7d0)/s2a+(1−3d0)]H=K[(1-d_0)/s_0-(3-7d_0)/s_{2a}+(1-3d_0)]. Here s0s_0 is a relaxation parameter related to the collision matrix, d0=cs2/c2d_0=c_s^2/c^2 is an adjustable scale factor, and is fixed as 1/31/3 in classical MRT-LB methods. ∂t(ρuu)\partial_t(\rho\mathbf{u}\mathbf{u}) is usually approximated by uF+Fu\mathbf{u}\mathbf{F}+\mathbf{F}\mathbf{u}, while other temporal derivatives are discretized by the explicit Euler scheme, and the gradient and Laplacian operators are computed by the second-order isotropic central schemes [54, 55].

Computational procedure

The computational produce of the numerical algorithm is listed as follows.

  1. Initialize physical variables and the distribution functions by the equilibrium distribution functions.

  1. Implement LB evolution equation (32) for phase and flow fields in the computational domain.

  1. Compute the order parameter ϕ\phi and density ρ\rho through Eqs. (34) and (18).

  1. Calculate the surface tension forces μϕ∇ϕ\mu_\phi\nabla\phi and μϕ0∇ϕ0\mu_{\phi_0}\nabla\phi_0.

  1. Compute the velocity u∗\mathbf{u}^{*} and the fluid-solid interaction force f\mathbf{f}.

  1. Update the velocity and pressure by using Eq. (36b).

  1. Calculate the hydrodynamic force Ff\mathbf{F}_{f} and torque Tf\mathbf{T}_{f} through the discretization of Eq. (30).

  1. Compute the translational velocity, angular velocity, and position of the particle according to Eq. (26).

  1. Update the smooth indicator function ϕ0\phi_{0} for the particle by using the hyperbolic tangent function.

  1. Calculate the inside force Ffin\mathbf{F}_{f}^{\mathrm{in}} and torque Tfin\mathbf{T}_{f}^{\mathrm{in}} according to the explicit discretization of Eq. (31).

  1. Repeat steps 2–10 until the convergence is reached.

Numerical validations and discussion

In the framework of LB method, there are some LB models based on different collision matrices, such as the classical MRT-LB model [56, 57, 58], the cascaded or central-moment LB model [59, 60], the Hermite moment LB model [61], central-Hermite moment LB model [62, 63] and so on. However, under the unified framework of modeling of the MRT-LB model in Refs. [51, 52], different forms of the collision matrices can be converted into each other through a specific lower triangular matrix with the diagonal element of unity. In this work, the Hermite moment model is applied, and the collision matrix can be written as

Λk=MH−1SHkMH=M0−1S0kM0,(41)\Lambda^{k}=\mathbf{M}_{H}^{-1}\mathbf{S}_{H}^{k}\mathbf{M}_{H}=\mathbf{M}_{0}^{-1}\mathbf{S}_{0}^{k}\mathbf{M}_{0}, \tag*{(41)}

where MH\mathbf{M}_{H} and SHk\mathbf{S}_{H}^{k} are the transformation matrix and relaxation matrix of the Hermite-moment based LB model. As shown in Ref. [52], MH\mathbf{M}_{H} can be written as NHM\mathbf{N}_{H}\mathbf{M}, NH\mathbf{N}_{H} is the lower triangular matrix associated with MH\mathbf{M}_{H} and natural transformation matrix M=CdM0\mathbf{M}=\mathbf{C}_{d}\mathbf{M}_{0}, and Cd\mathbf{C}_{d} is a diagonal matrix formed by the powers of lattice speed cc. S01=Cd−1NH−1SH1NHCd\mathbf{S}_{0}^{1}=\mathbf{C}_{d}^{-1}\mathbf{N}_{H}^{-1}\mathbf{S}_{H}^{1}\mathbf{N}_{H}\mathbf{C}_{d} is the new lower triangular relaxation matrix in the moment space formed by M0\mathbf{M}_{0}. In our simulations for two-dimensional problems, the D2Q9 lattice structure is applied to both phase field and flow field, and the weight coefficients in all directions are given by ω0=1−2d0+d02\omega_{0}=1-2d_{0}+d_{0}^{2}, ω1−4=(d0−d02)/2\omega_{1-4}=(d_{0}-d_{0}^{2})/2, and ω5−8=d02/4\omega_{5-8}=d_{0}^{2}/4. Other matrices are listed as follows:

Cd=diag⁡(1,c,c,c2,c2,c2,c3,c3,c4),\mathbf{C}_{d}=\operatorname{diag}\left(1,c,c,c^{2},c^{2},c^{2},c^{3},c^{3},c^{4}\right),
SH1=diag⁡(s0,s1ϕ,s1ϕ,s2,s2,s2,s3,s3,s4),SH2=diag⁡(s0,s1,s1,s2a,s2a,s2b,s3,s3,s4),\mathbf{S}_{H}^{1}=\operatorname{diag}\left(s_{0},s_{1\phi},s_{1\phi},s_{2},s_{2},s_{2},s_{3},s_{3},s_{4}\right),\qquad \mathbf{S}_{H}^{2}=\operatorname{diag}\left(s_{0},s_{1},s_{1},s_{2a},s_{2a},s_{2b},s_{3},s_{3},s_{4}\right),
M0=(111111111010−101−1−110010−111−1−1010101111001011111000001−1−1−1000001−1−1100000111−1000001111),NH=(100000000010000000001000000−cs200100000−cs2000100000000010000−cs2000010000−cs2000010cs400−cs2−cs20001).(42)\mathbf{M}_{0}= \begin{pmatrix} 1&1&1&1&1&1&1&1&1\\ 0&1&0&-1&0&1&-1&-1&1\\ 0&0&1&0&-1&1&1&-1&-1\\ 0&1&0&1&0&1&1&1&1\\ 0&0&1&0&1&1&1&1&1\\ 0&0&0&0&0&1&-1&-1&-1\\ 0&0&0&0&0&1&-1&-1&1\\ 0&0&0&0&0&1&1&1&-1\\ 0&0&0&0&0&1&1&1&1 \end{pmatrix}, \qquad \mathbf{N}_{H}= \begin{pmatrix} 1&0&0&0&0&0&0&0&0\\ 0&1&0&0&0&0&0&0&0\\ 0&0&1&0&0&0&0&0&0\\ -c_{s}^{2}&0&0&1&0&0&0&0&0\\ -c_{s}^{2}&0&0&0&1&0&0&0&0\\ 0&0&0&0&0&1&0&0&0\\ 0&-c_{s}^{2}&0&0&0&0&1&0&0\\ 0&0&-c_{s}^{2}&0&0&0&0&1&0\\ c_{s}^{4}&0&0&-c_{s}^{2}&-c_{s}^{2}&0&0&0&1 \end{pmatrix}. \tag*{(42)}

In the following, some problems are used to test the present diffuse-interface model for the gas-liquid-solid multiphase flows.

Phase separation in a porous medium

We first consider the phase separation in a porous medium based on a 256×256256 \times256 micro-CT image of the poorly sorted unconsolidated fluvial sandpack [64]. The no-flux boundary condition is imposed on all boundaries, and some parameters are set as M=0.1M=0.1, σ12=0.001\sigma_{12}=0.001, D=4D=4, ρ1=ρ2=1\rho_{1}=\rho_{2}=1, μ1=μ2=0.1\mu_{1}=\mu_{2}=0.1, d0=0.4d_{0}=0.4, si=1s_{i}=1, and Δx=Δt=1\Delta x=\Delta t=1. To adopt the present diffuse-interface method, the original data of this porous medium needs to be smoothed by a standard CH equation with finite-time iterations (20 times in this work). As shown in Figure 4, the phase-field variable is randomly initialized by ϕ(x,y)=[1−ϕ0(x,y)]rand⁡(x,y)\phi(x,y)=[1-\phi_0(x,y)]\operatorname{rand}(x,y), where rand⁡(x,y)\operatorname{rand}(x,y) is a function with the random value between -1 and 1. We perform some simulations at the contact angles of θ=45∘,90∘,135∘\theta=45^\circ,90^\circ,135^\circ, and plot the evolution process in Figure 5. In this figure, the droplet sizes increase in time, and some of them also coalesce into the larger ones, which leads to the eventual separation of binary fluid components. Due to the difference of the wetting property on the solid surface, the droplets also show hydrophilic or hydrophobic phenomena in the long-time evolutions, and the accuracy of present diffuse-interface model in predicting the contact angle will be tested in detail in the next part. Figure 6 shows the evolutions of the total energy EtotalE_{\mathrm{total}} at different contact angles. From this figure, one can observe that the total energy of this system decreases with time, which is consistent with the energy dissipation law given by Theorem 1.

Figure 4. The random initialization of two phases in a porous medium.

Figure 5. The evolution processes of the binary phase separation in the porous medium at t=1×104t = 1 \times10^4, 1×1051 \times10^5, 1×1061 \times10^6, 1×1071 \times10^7 (from left to right columns).

Figure 6. The evolution of the total energy Etotal\mathcal{E}_{total} for the binary phase separation in a porous medium.

A droplet spreading on a stationary cylinder surface

In this part, we continue to consider a droplet spreading on a cylinder surface in the square domain [−L/2,L/2]×[−L/4,3L/4][-L/2,L/2]\times[-L/4,3L/4] with L=256L=256 to test the capacity of the present diffuse-interface model in capturing the fluid interface and predicting the contact angle. In the following simulations, the periodic boundary condition is used in xx-direction and no-flux boundary condition is imposed at the bottom and top boundaries, a solid cylinder with radius RpR_p is located at (0,0)(0,0), and a droplet with radius R0R_0 is placed on the cylinder surface. Some physical parameters are set as R0=Rp=50R_0=R_p=50, ρ1=1\rho_1=1, ρ2=0.1\rho_2=0.1, and the others are the same as those in Section 4.1. Initially, the phase-field variables are given as

ϕ0(x,y)=12+12tanh⁡Rp−x2+y2D/2,ϕ(x,y)=[1−ϕ0(x,y)]tanh⁡R0−x2+(y−Rp)2D/2.(43)\begin{aligned} \phi_0(x,y)&=\frac{1}{2}+\frac{1}{2}\tanh\frac{R_p-\sqrt{x^2+y^2}}{D/2},\\ \phi(x,y)&=[1-\phi_0(x,y)]\tanh\frac{R_0-\sqrt{x^2+(y-R_p)^2}}{D/2}. \tag*{(43)} \end{aligned}

We conduct some simulations and plot the final equilibrium shapes of the droplet at a large range of contact angles in Figure 7. As shown in this figure, the shapes of the droplet agree well with the analytical solutions. To give a quantitative comparison, the maximum height of the droplet at equilibrium state (Hmax⁡H_{\max}) is measured, and it actually can be obtained by the initial shape under the condition of equal area,

Equilibrium droplet shape comparing Analytical and Numerical results

(a) θ=30∘\theta=30^\circ

Equilibrium droplet shape comparing Analytical and Numerical results

(b) θ=60∘\theta=60^\circ

Equilibrium droplet shape comparing Analytical and Numerical results

(c) θ=90∘\theta=90^\circ

Equilibrium droplet shape comparing Analytical and Numerical results

(d) θ=120∘\theta=120^\circ

Figure 7. The equilibrium shapes of the droplet at different contact angles.

Hmax⁡=r+k,πr2−r2cos⁡−1(k2+r2−Rp22kr)−Rp2cos⁡−1(k2−r2+Rp22kRp)+kRp2−(k2−r2+Rp22k)2=A0,(44)H_{\max}=r+k,\quad\pi r^2-r^2\cos^{-1}\left(\frac{k^2+r^2-R_p^2}{2kr}\right)-R_p^2\cos^{-1}\left(\frac{k^2-r^2+R_p^2}{2kR_p}\right)+k\sqrt{R_p^2-\left(\frac{k^2-r^2+R_p^2}{2k}\right)^2}=A_0, \tag*{(44)}

where A0A_0 is the initial area, kk is related to the finial radius rr and contact angle θ\theta,

k=r2+Rp2−2rRpcos⁡θ.(45)k=\sqrt{r^2+R_p^2-2rR_p\cos\theta}. \tag*{(45)}

Figure 8 presents the corresponding normalized maximum height of the droplet, and the present results are in a good agreement with the analytical and previous data [65, 66]. Additionally, there is no external force in this system such that the total energy should also decrease with time, and the numerical results in Figure 9 indeed confirm this property.

Figure 8. The normalized droplet heights at different contact angles.

Figure 9. The evolution of normalized total energy Etotal∗=Etotal/Etotaleq−1\mathcal{E}_{total}^{*} = \mathcal{E}_{total}/\mathcal{E}_{total}^{eq} - 1, Etotaleq\mathcal{E}_{total}^{eq} is the total energy at the final equilibrium moment.

Sedimentation of a particle

We further consider the problem of a single particle sedimentation in a stratified medium to test the accuracy of the present diffuse-interface model in predicting the hydrodynamic force. Initially, a circular particle with the radius Rp=0.125R_p = 0.125 and density ρp=1.25\rho_p = 1.25 is placed at the centerline of a channel with the width W=2W = 2 and length H=6H = 6, and it will free fall from the position (1,4)(1, 4) under the gravity acceleration ∣g∣=980|\mathbf{g}| = 980. In the channel, the fluid 1 is placed in the lower region of y≤H/2y \leq H/2 and the upper half region y>H/2y > H/2 is filled with fluid 2, and the no-slip boundary condition is applied on all boundaries. Additionally, a body force (ρ−ρ2)g(\rho- \rho_2)\mathbf{g} is imposed on the fluids. In the simulation of this problem, the lattice spacing and time step are fixed as Δx=1/192\Delta x = 1/192 and Δt=Δx/64\Delta t = \Delta x/64. We first focus on the homogeneous medium with ρ1=ρ2=1\rho_1 = \rho_2 = 1 and μ1=μ2=0.1\mu_1 = \mu_2 = 0.1, and present the time histories of the vertical position ypy_p and the vertical translational velocity vpv_p of the particle in Figure 10, from which one can find that when the interface width DD becomes smaller, the numerical results are more consistent with the data based on some sharp-interface methods [67, 68, 69].

Figure 10. Time histories of some quantities of the particle [(a) the vertical position ypy_p, (b) the vertical translational velocity vpv_p].

However, when we consider the stratified medium with a density difference by the phase-field model, the interface width should be greater than 2Δx2\Delta x at least to ensure to capture the large deformation of the fluid interface. We then present a comparison of different values of ρ1\rho_1 in Figure 11 where the interface width is set to be D=2ΔxD = 2\Delta x and other parameters are the same as those stated previously. As shown in Figure 11(a), when ρ1=1.1\rho_1 = 1.1, the particle needs more time to fall to the bottom boundary, compared to the homogeneous case, this is because it is subjected to a larger buoyancy in fluid 1. When ρ1=1.2\rho_1 = 1.2, the buoyancy becomes much larger but still less than the gravity of the particle, and thus the particle finally falls to the bottom of the channel after some oscillations at the fluid interface and the long-time sedimentation in fluid 1. For the last case with ρ1=1.3\rho_1 = 1.3, the gravity of the particle is smaller than the buoyancy from fluid 1 such that the particle oscillates at the fluid interface until the kinetic energy is dissipated and reaches a steady state. What is more, the wettability almost has no effect on the vertical position of the particle, except for the case of ρ1=1.2\rho_1 = 1.2 where the sedimentation is slower with a larger contact angle. The time histories of the vertical velocity of a neutral particle with different values of the density ρ1\rho_1 are also shown in Figure 11(b), from which one can observe that the velocity takes a longer time to go back to zero at a larger density ρ1\rho_1. In addition, we also present the dynamics of the particle and the surrounding fluids in Figure 12, where ρ1=1.2\rho_1 = 1.2, θ=45∘\theta= 45^\circ and 135∘135^\circ. From this figure, one can see that a hydrophilic particle immerses in fluid 1 faster than a hydrophobic particle. When the particle is immersed in fluid 1, the hydrophilic particle is fully surrounded by fluid 1, while a bubble is adhered to the hydrophobic particle all the way.

Figure 11. Time histories of some quantities of the particle [(a) the vertical position ypy_p, (b) the vertical translational velocity vpv_p].

Snapshots of particle sedimentation for (a) $\theta = 45^\circ$ and (b) $\theta = 135^\circ$, at $t = 1$, $1.5$, $2$, $3$, and $4$

Figure 12. Snapshots of the particle sedimentation in a stratified medium at t=1,1.5,2,3,4t = 1, 1.5, 2, 3, 4 (from left to right columns).

Balance of wetting particles on the liquid-liquid interface

The fourth problem we consider is the balance of wetting particles on the liquid-liquid interface in presence of gravity. The computational domain is a square chamber with the length LL, the periodic boundary condition is applied at left and right boundaries and no-flux boundary condition is adopted at upper and lower boundaries. The liquid-liquid interface is initialized at y=L/2y=L/2, and the wetting particles with the same radius RpR_p are half immersed in two fluids. To conduct a comparison with the theoretical solution [34], the density ratio of two fluids is set to be the same (ρ1=ρ2=ρf\rho_1=\rho_2=\rho_f). The particles will move to the equilibrium positions under the balance of gravity and surface tension, which can be depicted by the Bond number,

Bo=(ρp−ρf)Rp2∣g∣σ.(46)Bo=\frac{(\rho_p-\rho_f)R_p^2|\mathbf{g}|}{\sigma}. \tag*{(46)}

We first study a single particle placed at the central of the liquid-liquid interface. As shown in Figure 13(c), the downward distance hh from the fluid interface at the left (or right) boundary to the center of the particle can be obtained from the following geometric relation,

Figure 13. Snapshots of the mechanical equilibrium states of a neutral particle trapped at fluid-fluid interface in presence of gravity.

h=Rpcos⁡(θ−α)+LπBo(1−cos⁡α),(47)h=R_p\cos(\theta-\alpha)+\frac{L}{\pi Bo}(1-\cos\alpha), \tag*{(47)}

where α\alpha is the slope angle of the fluid-fluid interface, and can be determined from the force balance [34],

L2=Rpsin⁡(θ−α)+LπBosin⁡α.(48)\frac{L}{2}=R_p\sin(\theta-\alpha)+\frac{L}{\pi Bo}\sin\alpha. \tag*{(48)}

For this problem, we set L=256L=256, Rp=32R_p=32, ρf=1\rho_f=1, ∣g∣=2×10−6|\mathbf{g}|=2\times10^{-6}, and the other parameters are the same as those in Section 4.1. We perform some simulations, and show the results in Figure 13. From this figure, one can find that the particle moves toward its mechanically equilibrium position in the gravitational field, and it moves upwards with Bo<0Bo<0 but downwards when the gravity is larger than the buoyancy. Figure 14 presents a comparison of the measured distance hh with the theoretical solution (43), and an agreement between them is observed.

Figure 14. The downward distance hh from the fluid interface to the center of the particle.

We also consider the case of two symmetrical particles with the horizontal distance being 2δ2\delta. The particle radius is set as Rp=16R_p=16, and D=3ΔxD=3\Delta x is used for these two small particles. The theoretical solution of distance from the interface to the center of the particle hh (or the vertical distance of the two particles dd) can also be derived from the force balance equations in horizontal and vertical directions (for more details, see Ref. [34]),

Flat=σ(cos⁡α−cos⁡β)+Rp[−sin⁡(π2−θ+α)+sin⁡(π2−θ+β)]Δp,(49)F^{\mathrm{lat}}=\sigma(\cos\alpha-\cos\beta)+R_p\left[-\sin\left(\frac{\pi}{2}-\theta+\alpha\right)+\sin\left(\frac{\pi}{2}-\theta+\beta\right)\right]\Delta p, \tag*{(49)}
σ(sin⁡α+sin⁡β)+Rp[cos⁡(π2−θ+α)+cos⁡(π2−θ+β)]−π(ρp−ρf)Rp2∣g∣=0,(50)\sigma(\sin\alpha+\sin\beta)+R_p\left[\cos\left(\frac{\pi}{2}-\theta+\alpha\right)+\cos\left(\frac{\pi}{2}-\theta+\beta\right)\right]-\pi(\rho_p-\rho_f)R_p^2|\mathbf{g}|=0, \tag*{(50)}

where α\alpha is the slope angle of the wide-gap fluid-fluid interface at the point of contact between the interface and the particle surface, and β\beta is that of the narrow-gap fluid-fluid interface (see the right column in Figure 15). Flat>0F^{lat} > 0 and Flat<0F^{lat} < 0 represent repulsive and attractive forces between two particles in the horizontal direction, respectively. Here it should be noted that through imposing the force FlatF^{lat} in the horizontal direction, the two particles are only allowed to move in the vertical direction. Once they are allowed to move in all directions, only the case of 2δ=L/22\delta= L/2 can reach the steady state without particles touching together.

Figure 15. (a) ρp,1=ρp,2=0.5\rho_{p,1} = \rho_{p,2} = 0.5; (b) ρp,1=ρp,2=1.5\rho_{p,1} = \rho_{p,2} = 1.5; (c) ρp,1=1.5\rho_{p,1} = 1.5, ρp,2=0.5\rho_{p,2} = 0.5. The mechanical equilibrium states of the two particles trapped at fluid-fluid interface in presence of gravity with distance δ=24Δx\delta= 24\Delta x, 48Δx48\Delta x, 64Δx64\Delta x (from left to right columns).

We present some results under different densities and initially horizontal distances of the two particles in Figure 15, and find that when ρp,1=ρp,2\rho_{p,1} = \rho_{p,2}, the value of hh decreases with the increase of δ\delta, while for other cases, an opposite trend is observed. We also conduct some quantitative comparisons of distances (hh and dd) and force (FlatF^{lat}) in Figure 16, and the numerical results agree well with the theoretical solutions. These validations indicate that the present diffuse-interface model can accurately describe the gas-liquid-solid multiphase flows, and in the following, it will be applied to study more complex multiphase flows.

Figure 16. Comparisons of numerical predictions and the theoretical solutions for two particles trapped at the fluid-fluid interface under gravity [(a) the downward distance hh from the interface to the center of the particles with the same density and the vertical distance 2d2d between two particles, (b) the repulsive or attractive force FlatF^{lat} between two particles in the horizontal direction].

Mixing of two immiscible fluids and particles in an annulus with an inner rotating cylinder

Rotary drums are widely used in a range of chemical engineering industries to deal with liquid-solid mixing [70]. In this part, we consider a simple case of gas-liquid-particle mixing in an annular gap with an inner rotating cylinder. As illustrated in Figure 17, two immiscible fluids and 15 particles are initialized in an annulus with the outer radius Rout=2.56R_{out} = 2.56 and inner radius Rin=0.64R_{in} = 0.64, and the inner cylinder rotates with a rotating speed ωin\omega_{in} to mix them. To study this problem, a larger square region [−2.56,2.56]×[−2.56,2.56][-2.56, 2.56] \times[-2.56, 2.56] is used as the computational domain, and no-flux boundary condition is imposed on all boundaries. To depict the outer neutral solid region and the inner neutral cylinder of the annulus, two additional phase-field variables (ϕ0,out\phi_{0,out} and ϕ0,in\phi_{0,in}) are introduced, and the initialization of all the phase-field variables are given by

An annulus with the inner rotating cylinder

Figure 17. An annulus with the inner rotating cylinder.

ϕ0,out(x,y)=12+12tanh⁡x2+y2−RoutD/2,ϕ0,in(x,y)=12+12tanh⁡Rin−x2+y2D/2,ϕ0,k(x,y)=12+12tanh⁡Rp,k−(x−xp,k)2+(y−yp,k)2D/2,ϕ(x,y)=[1−ϕ0,out(x,y)−ϕ0,in(x,y)−∑k=115ϕ0,k(x,y)]tanh⁡−2yD,(51)\begin{aligned} \phi_{0,out}(x,y) &= \frac{1}{2}+\frac{1}{2}\tanh\frac{\sqrt{x^2+y^2}-R_{out}}{D/2},\\ \phi_{0,in}(x,y) &= \frac{1}{2}+\frac{1}{2}\tanh\frac{R_{in}-\sqrt{x^2+y^2}}{D/2},\\ \phi_{0,k}(x,y) &= \frac{1}{2}+\frac{1}{2}\tanh\frac{R_{p,k}-\sqrt{(x-x_{p,k})^2+(y-y_{p,k})^2}}{D/2},\\ \phi(x,y) &= \left[1-\phi_{0,out}(x,y)-\phi_{0,in}(x,y)-\sum_{k=1}^{15}\phi_{0,k}(x,y)\right]\tanh\frac{-2y}{D}, \tag*{(51)} \end{aligned}

where Rp,kR_{p,k} and xp,k=(xp,k,yp,k)\mathbf{x}_{p,k}=(x_{p,k},y_{p,k}) are the radius and initial position of the kk-th particle, respectively. In our simulations, the gravity with ∣g∣=0.01|\mathbf{g}|=0.01 is imposed on particles, and the material properties of particles are randomly determined in the given regions, i.e., Rp,kR_{p,k} is selected between 0.2 and 0.3, the density of kk-th particle is given between 0.95 and 1.05, and the contact angle θk\theta_k of kk-th particle is set between 45∘45^\circ and 135∘135^\circ. Additionally, the physical parameters of two fluids are given as ρ1=ρ2=1\rho_1=\rho_2=1, μ1=μ2=0.1\mu_1=\mu_2=0.1, and σ12=0.001\sigma_{12}=0.001.

In addition, to avoid the overlap between particles or between the particles and walls, the following short-range repulsive forces are considered [68],

Fk,jpp={0,dkj>Rp,k+Rp,j+ξ,1ϵ(xp,k−xp,j)(Rp,k+Rp,j+ξ−dkj)2,Rp,k+Rp,j≤dkj≤Rp,k+Rp,j+ξ,1ϵ(xp,k−xp,j)(Rp,k+Rp,j−dkj),dkj≤Rp,k+Rp,j,(52)\mathbf{F}_{k,j}^{pp}= \begin{cases} 0, & d_{kj}>R_{p,k}+R_{p,j}+\xi,\\ \frac{1}{\epsilon}(\mathbf{x}_{p,k}-\mathbf{x}_{p,j})(R_{p,k}+R_{p,j}+\xi-d_{kj})^2, & R_{p,k}+R_{p,j}\le d_{kj}\le R_{p,k}+R_{p,j}+\xi,\\ \frac{1}{\epsilon}(\mathbf{x}_{p,k}-\mathbf{x}_{p,j})(R_{p,k}+R_{p,j}-d_{kj}), & d_{kj}\le R_{p,k}+R_{p,j}, \end{cases} \tag*{(52)}
Fkpw={0,dk′>2Rp,k+ξ,1ϵ(xp,k−xp,k′)(2Rp,k+ξ−dk′)2,2Rp,k≤dk′≤2Rp,k+ξ,1ϵ(xp,k−xp,k′)(2Rp,k−dk′),dk′≤2Rp,k,(53)\mathbf{F}_{k}^{pw}= \begin{cases} 0, & d'_k>2R_{p,k}+\xi,\\ \frac{1}{\epsilon}(\mathbf{x}_{p,k}-\mathbf{x}'_{p,k})(2R_{p,k}+\xi-d'_k)^2, & 2R_{p,k}\le d'_k\le2R_{p,k}+\xi,\\ \frac{1}{\epsilon}(\mathbf{x}_{p,k}-\mathbf{x}'_{p,k})(2R_{p,k}-d'_k), & d'_k\le2R_{p,k}, \end{cases} \tag*{(53)}

where xp,k′\mathbf{x}'_{p,k} is the position of the nearest imaginary particle on the boundary wall, dkj=∣xp,k−xp,j∣d_{kj}=|\mathbf{x}_{p,k}-\mathbf{x}_{p,j}| and dk′=∣xp,k−xp,k′∣d'_k=|\mathbf{x}_{p,k}-\mathbf{x}'_{p,k}|. ξ\xi is the threshold of the repulsion forces, and ϵ\epsilon is the stiff parameter of the scheme.

We perform some simulations with Δx=0.01\Delta x = 0.01, Δt=0.001\Delta t = 0.001, M=0.01M = 0.01, D=5ΔxD = 5\Delta x, ξ=D/2\xi= D/2, ϵ=Δx/2\epsilon= \Delta x/2, and show the mixing processes at some specific moments in Figure 18 where ωin=0.1\omega_{\mathrm{in}} = 0.1. From this figure, one can observe that the two layered fluids mix into each other as time goes on, and the particles also move in the annular gap under the effects of rotating speed, gravity, surface tension and repulsive forces. Additionally, the trajectories of the particles in some specific time intervals are plotted in Figure 19. In this figure, the overall movement trends of particles are rotating in time, but there are many special changes at some moments. For instance, in Figure 19(a), the moving direction of the 6-th particle is changed by the repulsive force of the outer wall, the direction of the 3-rd particle is turned by the repulsive forces between particles, and the 14-th particle becomes close to the 11-th particle because of the low-pressure wake created by the 11-th particle.

The mixing of the fluids and particles in an annulus with inner rotating cylinder

Figure 18. The mixing of the fluids and particles in an annulus with inner rotating cylinder (ωin=0.1\omega_{\mathrm{in}} = 0.1).

The trajectories of the particles in some specific time intervals

Figure 19. The trajectories of the particles in some specific time intervals [(a) 0≤t≤1000 \le t \le100, (b) 100≤t≤400100 \le t \le400, (c) 500≤t≤1000500 \le t \le1000, and (d) 1500≤t≤20001500 \le t \le2000].

To quantitatively describe the mixing degree, we calculate the information entropy of phase-field variable by the following formula,

H(ϕ)=−∑np(ϕn)log⁡2p(ϕn),(54)H(\phi)=-\sum_n p(\phi_n)\log_2 p(\phi_n), \tag*{(54)}

where p(ϕn)p(\phi_n) is the probability of the nn-th value range of ϕ\phi. As shown in Figure 20, the value of H(ϕ)H(\phi) increases with the mixing of fluids and particles at first, and then oscillates near a certain value when the rotating speed reaches a quasi-steady state. One can also find from this figure that the value of H(ϕ)H(\phi) also increases with the increase of the rotating speed due to a larger driving force.

The evolution of information entropy of the phase-field variable $\phi$

Figure 20. The evolution of information entropy of the phase-field variable ϕ\phi.

Displacement of immiscible fluids and particles in a complex channel

The displacement of immiscible fluids is an important issue for industry applications, such as the geological sequestration of carbon dioxide and oil recovery [71, 72]. In recent years, the simplified problem of displacement in a cavity has been widely studied [73, 74, 75], but the effect of free solid objects on the displacement has not been considered in these previous works, which may also play an important role in the above-mentioned applications. Here we assume the free solid objects to be the circular particles, and investigate the immiscible displacement in a cavity structure. The schematic of the problem is shown in Figure 21 where the width and length of the computational domain are L=2.56L = 2.56 and 5L5L, respectively. The periodic boundary condition is applied in the horizontal direction, while the no-flux boundary condition is imposed on the neutral bottom and top walls.

Schematic of the complex channel

Figure 21. Schematic of the complex channel, the gray region represents the solid wall.

Initially, 16 particles are placed in the channel with random radius (0.16≤Rp,k≤0.2)(0.16 \le R_{p,k} \le0.2), density (0.95≤ρp,k≤1.05)(0.95 \le\rho_{p,k} \le1.05) as well as contact angle (80∘≤θp,k≤100∘)(80^\circ\le\theta_{p,k} \le100^\circ), and most of them are placed in the left cavity. In addition, a droplet of the displaced fluid 1 with ρ1=1\rho_1 = 1 and μ1=0.1\mu_1 = 0.1 is located in the right cavity, and other parts of the domain are filled by the driving fluid 2 with ρ2=1\rho_2 = 1 and μ2=0.01\mu_2 = 0.01. To achieve the above settings, the phase-field variables are initialized by

ϕ0,bot(x,y)=(12+12tanh⁡L/4−yD/2)[12+12tanh⁡(x−L)2+(y−L)2−LD/2][12+12tanh⁡(x−5L/4)2+(y−L/4)2−L/4D/2],\phi_{0,\mathrm{bot}}(x,y)=\left(\frac{1}{2}+\frac{1}{2}\tanh\frac{L/4-y}{D/2}\right)\left[\frac{1}{2}+\frac{1}{2}\tanh\frac{\sqrt{(x-L)^2+(y-L)^2}-L}{D/2}\right]\left[\frac{1}{2}+\frac{1}{2}\tanh\frac{\sqrt{(x-5L/4)^2+(y-L/4)^2}-L/4}{D/2}\right],
ϕ0,k(x,y)=12+12tanh⁡Rp,k−(x−xp,k)2+(y−yp,k)2D/2,\phi_{0,k}(x,y)=\frac{1}{2}+\frac{1}{2}\tanh\frac{R_{p,k}-\sqrt{(x-x_{p,k})^2+(y-y_{p,k})^2}}{D/2},
ϕ(x,y)=[1−ϕ0,bot(x,y)−∑k=116ϕ0,k(x,y)]tanh⁡L/4−(x−5L/4)2+(y−L/4)2D/2.(55)\phi(x,y)=\left[1-\phi_{0,\mathrm{bot}}(x,y)-\sum_{k=1}^{16}\phi_{0,k}(x,y)\right]\tanh\frac{L/4-\sqrt{(x-5L/4)^2+(y-L/4)^2}}{D/2}. \tag*{(55)}

To drive the fluids and particles, a body force Fb=(0.001,0)\mathbf{F}_b=(0.001,0) along the positive xx-direction is imposed on the fluids, and the effect of the gravity is neglected in this case. In the following simulations, other parameters are set the same as those in § 4.5.

We consider three different cases of the displacement problem, case A: single fluid and particles, case B: only immiscible fluids, and case C: immiscible fluids and particles. As shown in Figure 22, in the early stage of displacement when the particles do not contact with the fluid 1, the particles show the same trajectories for cases A and C, while

Figure 22. The dynamics of displacement in a complex channel (cases A, B and C from left to right columns).

the fluid 1 shows a slower displacement for case C due to the hindrance of the particles in the upstream of the droplet, compared to case B. On the other hand, when the particles interact with the fluid 1 (see case C), it seems that more fluid 1 is displaced from the cavity, and some particles are trapped by viscous force and surface tension, and thus move slower in the channel.

To give a quantitative comparison of the displacement efficiency, we define DeD_e to be the ratio of the volume of the fluid 1 out the right cavity (x<2Lx < 2L and x>5L/2x > 5L/2) to the total volume of fluid 1, and plot the results in Figure 23(a). From this figure, one can find that when t<250t < 250, the presence of particles in the upstream reduces the fluid velocity, which leads to a lower displacement efficiency. However, when some particles catch up with and exceed the fluid 1, they promote some fluid 1 out of the cavity because of the effects of FSI and wettability, and thus the value of DeD_e becomes larger than that of the case without particles. In addition, the horizontal positions of some typical particles of cases A and C are shown in Figure 23(b). In this figure, the 15-th particle shows the same position for two cases since it does not interact with fluid 1. However, the trajectories of the 12-th and 16-th particles have some differences in the later stage: the 16-th particle is trapped by the viscous resistance of fluid 1, while the 12-th particle moves slowly due to a small driving velocity caused by the obstruction of particles in the downstream. These results illustrate that the presence of the particles can improve the displacement efficiency to a certain extent.

Figure 23. Time histories of some quantities [(a) displacement efficiency, (b) horizontal positions of some particles].

Conclusions

In this paper, a thermodynamically consistent and conservative diffuse-interface model for gas-liquid-solid multiphase flows is proposed based on a ternary phase-field model. In the present diffuse-interface model, a novel free energy including the original part for two-phase flows, the penalty term in solid phase as well as the term reflecting the wettability on the solid surface is also developed, and under some reasonable approximations, we can show that the last term is consistent with the wall energy in the classic phase-field model for two-phase flows. In addition, a consistent and conservative NS equations is also constructed for the fluid flows, in which the volume fraction of solid phase is introduced to depict the FSI and the high viscosity in solid phase. Furthermore, the total energy of the present phase-field-NS system is also proved to be dissipative for the two-phase flows. We note that the present diffuse-interface model not only can be used to describe the two-phase flows in complex geometries, but also can be applied to study the gas-liquid-particle multiphase flows by including the governing equations of particle motion. To solve the proposed diffuse-interface model, a general LB method is also developed where the scale factor d0d_0, instead of the fixed value in classical LB methods, can be adjusted to improve the numerical stability. The accuracy and the energy dissipation of the diffuse-interface model for gas-liquid-solid multiphase flows are first tested by several benchmark problems, then some multiphase flows in complex geometries with complex interfacial dynamics and FSI are further considered, and the numerical results demonstrate the good capability of the present diffuse-interface model.

Acknowledgments

This research was supported by the National Natural Science Foundation of China (Grants No. 12072127 and No 51836003), and the Interdisciplinary Research Program of HUST (2023JCYJ002). The computation was completed on the HPC Platform of Huazhong University of Science and Technology.

References

  1. [1]A. Lloyd, Seakeeping: Ship behaviour in rough weather, Ellis Horwood (1989).
  2. [2]S. O. Unverdi, G. Tryggvason, A front-tracking method for viscous, incompressible, multi-fluid flows, Journal of Computational Physics 100 (1) (1992) 25–37.
  3. [3]M. Sussman, K. Smith, M. Hussaini, M. Ohta, R. Zhi-Wei, A sharp interface method for incompressible two-phase flows, Journal of Computational Physics 221 (2) (2007) 469–505.DOI
  4. [4]D. M. Anderson, G. B. McFadden, A. A. Wheeler, Diffuse-interface methods in fluid mechanics, Annual Review of Fluid Mechanics 30 (1) (1998) 139–165.
  5. [5]D. Jacqmin, Calculation of two-phase Navier–Stokes flows using phase-field modeling, Journal of Computational Physics 155 (1) (1999) 96–127.DOI
  6. [6]V. Badalassi, H. Ceniceros, S. Banerjee, Computation of multiphase systems with phase field models, Journal of Computational Physics 190 (2) (2003) 371–397.
  7. [7]J. W. Cahn, C. M. Elliott, A. Novick-Cohen, The Cahn–Hilliard equation with a concentration dependent mobility: motion by minus the laplacian of the mean curvature, European Journal of Applied Mathematics 7 (3) (1996) 287–301.DOI
  8. [8]P.-H. Chiu, Y.-T. Lin, A conservative phase field method for solving incompressible two-phase flows, Journal of Computational Physics 230 (1) (2011) 185–204.
  9. [9]A. Andersen, U. Pesavento, Z. J. Wang, Unsteady aerodynamics of fluttering and tumbling plates, Journal of Fluid Mechanics 541 (2005) 65–90.DOI
  10. [10]C. S. Peskin, Numerical analysis of blood flow in the heart, Journal of Computational Physics 25 (3) (1977) 220–252.DOI
  11. [11]A. L. Fogelson, C. S. Peskin, A fast numerical method for solving the three-dimensional Stokes’ equations in the presence of suspended particles, Journal of Computational Physics 79 (1) (1988) 50–69.DOI
  12. [12]D. R. Noble, J. R. Torczynski, A lattice-Boltzmann method for partially saturated computational cells, International Journal of Modern Physics C 09 (08) (1998) 1189–1201.DOI
  13. [13]B. K. Cook, D. R. Noble, J. R. Williams, A direct simulation method for particle-fluid systems, Engineering Computations 21 (2004) 151–168.
  14. [14]P. Angot, C.-H. Bruneau, P. Fabrie, A penalization method to take into account obstacles in incompressible viscous flows, Numerische Mathematik 81 (1999) 497–520.
  15. [15]D. Kolomenskiy, K. Schneider, A Fourier spectral method for the Navier–Stokes equations with volume penalization for moving solid obstacles, Journal of Computational Physics 228 (16) (2009) 5687–5709.DOI
  16. [16]Y. Nakayama, R. Yamamoto, Simulation method to resolve hydrodynamic interactions in colloidal dispersions, Physical Review E 71 (2005) 036707.pubmed.ncbi.nlm.nih.gov/15903633
  17. [17]Y. Nakayama, K. Kim, R. Yamamoto, Simulating (electro)hydrodynamic effects in colloidal dispersions: Smoothed profile method, The European Physical Journal E 26 (2008) 361–368.
  18. [18]H. Ding, P. D. M. Spelt, Wetting condition in diffuse interface simulations of contact line motion, Physical Review E 75 (2007) 046708.
  19. [19]Y. Sui, H. Ding, P. D. Spelt, Numerical simulations of flows with moving contact lines, Annual Review of Fluid Mechanics 46 (1) (2014) 97–119.
  20. [20]Q. Li, K. Luo, Q. Kang, Y. He, Q. Chen, Q. Liu, Lattice Boltzmann methods for multiphase flow and phase-change heat transfer, Progress in Energy and Combustion Science 52 (2016) 62–105.
  21. [21]P. G. de Gennes, Wetting: statics and dynamics, Reviews of Modern Physics 57 (1985) 827–863.
  22. [22]M. R. Moldover, J. W. Cahn, An interface phase transition: Complete to partial wetting, Science 207 (4435) (1980) 1073–1075.pubmed.ncbi.nlm.nih.gov/17759838
  23. [23]J.-J. Huang, H. Huang, X. Wang, Wetting boundary conditions in numerical simulation of binary fluids by using phase-field method: Some comparative studies and new development, International Journal for Numerical Methods in Fluids 77 (3) (2015) 123–158.
  24. [24]H. Liang, H. Liu, Z. Chai, B. Shi, Lattice Boltzmann method for contact-line motion of binary fluids with high density ratio, Physical Review E 99 (2019) 063306.
  25. [25]S. Aland, J. Lowengrub, A. Voigt, Two-phase flow in complex geometries: A diffuse domain approach, Computer Modeling in Engineering & Sciences 57 (1) (2010) 77–106.
  26. [26]Z. Guo, F. Yu, P. Lin, S. Wise, J. Lowengrub, A diffuse domain method for two-phase flows with large density ratio in complex geometries, Journal of Fluid Mechanics 907 (2021) A38.
  27. [27]Y. Yang, Z. Tan, J. Wang, J. Kim, Modified diffuse interface fluid model and its consistent energy-stable computation in arbitrary domains, Journal of Computational Physics 488 (2023) 112216.
  28. [28]Q. Hong, Y. Gong, J. Zhao, Thermodynamically consistent hydrodynamic phase-field computational modeling for fluid-structure interaction with moving contact lines, Journal of Computational Physics 492 (2023) 112409.
  29. [29]H. Shinto, Computer simulation of wetting, capillary forces, and particle-stabilized emulsions: From molecular-scale to mesoscale modeling, Advanced Powder Technology 23 (5) (2012) 538–547.
  30. [30]G. Lecrivain, R. Yamamoto, U. Hampel, T. Taniguchi, Direct numerical simulation of a particle attachment to an immersed bubble, Physics of Fluids 28 (8) (2016) 083301.
  31. [31]G. Lecrivain, R. Yamamoto, U. Hampel, T. Taniguchi, Direct numerical simulation of an arbitrarily shaped particle at a fluidic interface, Physical Review E 95 (2017) 063107.
  32. [32]G. Lecrivain, Y. Kotani, R. Yamamoto, U. Hampel, T. Taniguchi, Diffuse interface model to simulate the rise of a fluid droplet across a cloud of particles, Physical Review Fluids 3 (2018) 094002.
  33. [33]G. Lecrivain, T. B. P. Grein, R. Yamamoto, U. Hampel, T. Taniguchi, Eulerian/Lagrangian formulation for the elasto-capillary deformation of a flexible fibre, Journal of Computational Physics 409 (2020) 109324.
  34. [34]Y. Mino, H. Shinto, Lattice Boltzmann method for simulation of wettable particles at a fluid-fluid interface under gravity, Physical Review E 101 (2020) 033304.
  35. [35]Y. Mino, H. Tanaka, K. Nakaso, K. Gotoh, H. Shinto, Lattice boltzmann model for capillary interactions between particles at a liquid-vapor interface under gravity, Physical Review E 105 (2022) 045316.
  36. [36]D. Iwahara, H. Shinto, M. Miyahara, K. Higashitani, Liquid drops on homogeneous and chemically heterogeneous surfaces: A two-dimensional lattice Boltzmann study, Langmuir 19 (21) (2003) 9086–9093.
  37. [37]L. Zheng, S. Zheng, Q. Zhai, Phase-field lattice Boltzmann equation for wettable particle fluid dynamics, Physical Review E 108 (2023) 025304.
  38. [38]D. Jacqmin, Contact-line dynamics of a diffuse fluid interface, Journal of Fluid Mechanics 402 (2000) 57–88.
  39. [39]P. Yue, C. Zhou, J. J. Feng, Sharp-interface limit of the Cahn–Hilliard model for moving contact lines, Journal of Fluid Mechanics 645 (2010) 279–294.
  40. [40]J. Liu, C. Huang, Z. Chai, B. Shi, A diffuse-interface lattice Boltzmann method for fluid–particle interaction problems, Computers & Fluids 233 (2022) 105240.
  41. [41]F. J. Higuera, S. Succi, R. Benzi, Lattice gas dynamics with enhanced collisions, Europhysics Letters 9 (4) (1989) 345.
  42. [42]S. Chen, G. D. Doolen, Lattice Boltzmann method for fluid flows, Annual Review of Fluid Mechanics 30 (1) (1998) 329–364.
  43. [43]C. K. Aidun, J. R. Clausen, Lattice-Boltzmann method for complex flows, Annual Review of Fluid Mechanics 42 (1) (2010) 439–472.DOI
  44. [44]F. Boyer, C. Lapuerta, Study of a three component Cahn-Hilliard flow model, ESAIM: Mathematical Modelling and Numerical Analysis 40 (4) (2006) 653–687.DOI
  45. [45]T. Young, III. An essay on the cohesion of fluids, Philosophical Transactions of the Royal Society of London 95 (1805) 65–87.
  46. [46]H. Abels, H. Garcke, G. Grün, Thermodynamically consistent, frame indifferent diffuse interface models for incompressible two-phase flows with different densities, Mathematical Models and Methods in Applied Sciences 22 (03) (2012) 1150013.arxiv.org/abs/1104.1336
  47. [47]Z. Huang, G. Lin, A. M. Ardekani, Consistent, essentially conservative and balanced-force Phase-Field method to model incompressible two-phase flows, Journal of Computational Physics 406 (2020) 109192.DOI
  48. [48]S. Mirjalili, A. Mani, Consistent, energy-conserving momentum transport for simulations of two-phase flows using the phase field equations, Journal of Computational Physics 426 (2021) 109918.arxiv.org/abs/1912.10096
  49. [49]K. Suzuki, T. Inamuro, Effect of internal mass in the simulation of a moving body by the immersed boundary method, Computers & Fluids 49 (1) (2011) 173–187.DOI
  50. [50]Z. Chen, M. Wang, An improved immersed moving boundary for hydrodynamic force calculation in lattice Boltzmann method, International Journal for Numerical Methods in Engineering 121 (20) (2020) 4493–4508.DOI
  51. [51]Z. Chai, B. Shi, Multiple-relaxation-time lattice Boltzmann method for the Navier-Stokes and nonlinear convection-diffusion equations: Modeling, analysis, and elements, Physical Review E 102 (2020) 023306.DOI
  52. [52]Z. Chai, X. Yuan, B. Shi, Rectangular multiple-relaxation-time lattice Boltzmann method for the Navier-Stokes and nonlinear convection-diffusion equations: General equilibrium and some important issues, Physical Review E 108 (2023) 015304.DOI
  53. [53]H. Liang, B. Shi, Z. Guo, Z. Chai, Phase-field-based multiple-relaxation-time lattice Boltzmann model for incompressible multiphase flows, Physical Review E 89 (2014) 053320.pubmed.ncbi.nlm.nih.gov/25353927
  54. [54]H. Wang, X. Yuan, H. Liang, Z. Chai, B. Shi, A brief review of the phase-field-based lattice Boltzmann method for multiphase flows, Capillarity 2 (2) (2019) 33–52.DOI
  55. [55]C. Zhan, Z. Chai, B. Shi, Consistent and conservative phase-field-based lattice Boltzmann method for incompressible two-phase flows, Physical Review E 106 (2022) 025319.DOI
  56. [56]D. d’Humières, Generalized Lattice-Boltzmann Equations, Vol. 159, AIAA, Washington, DC, 1992, pp. 450–458.
  57. [57]P. Lallemand, L.-S. Luo, Theory of the lattice Boltzmann method: Dispersion, dissipation, isotropy, Galilean invariance, and stability, Physical Review E 61 (2000) 6546–6562.pubmed.ncbi.nlm.nih.gov/11088335
  58. [58]P. V. Coveney, S. Succi, D. d’Humières, I. Ginzburg, M. Krzaczyk, P. Lallemand, L.-S. Luo, Multiple-relaxation–time lattice Boltzmann models in three dimensions, Philosophical Transactions of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences 360 (1792) (2002) 437–451.
  59. [59]M. Geier, A. Greiner, J. G. Korvink, Cascaded digital lattice Boltzmann automata for high Reynolds number flow, Physical Review E 73 (2006) 066705.pubmed.ncbi.nlm.nih.gov/16907021
  60. [60]K. N. Premnath, S. Banerjee, Inertial frame independent forcing for discrete velocity Boltzmann equation: Implications for filtered turbulence simulation, Communications in Computational Physics 12 (3) (2012) 732–766.DOI
  61. [61]C. Coreixas, G. Wissocq, G. Puigt, J.-F. Boussugue, P. Sagaut, Recursive regularization step for high-order lattice Boltzmann methods, Physical Review E 96 (2017) 033306.DOI
  62. [62]C. Coreixas, B. Chopard, J. Latt, Comprehensive comparison of collision models in the lattice Boltzmann framework: Theoretical investigations, Physical Review E 100 (2019) 033305.DOI
  63. [63]K. K. Mattila, P. C. Philippi, L. A. Hegele, Jr., High-order regularization in lattice-Boltzmann equations, Physics of Fluids 29 (4) (2017) 046103.DOI
  64. [64]J. E. Santos, M. J. Pyrcz, M. Prodanović, 3D Dataset of binary images: A collection of synthetically created digital rock images of complex media, Data in Brief 40 (2022) 107797.DOI
  65. [65]A. Fakhari, D. Bolster, Diffuse interface modeling of three-phase contact line dynamics on curved boundaries: A lattice Boltzmann model for large density and viscosity ratios, Journal of Computational Physics 334 (2017) 620–638.DOI
  66. [66]X. Liu, Z. Chai, C. Zhan, B. Shi, W. Zhang, A diffuse-domain phase-field lattice Boltzmann method for two-phase flows in complex geometries, Multiscale Modeling & Simulation 20 (4) (2022) 1411–1436.DOI
  67. [67]R. Glowinski, T. Pan, T. Hesla, D. Joseph, P. Périaux, A fictitious domain approach to the direct numerical simulation of incompressible viscous flow past moving rigid bodies: Application to particulate flow, Journal of Computational Physics 169 (2) (2001) 363–426.DOI
  68. [68]D. Wan, S. Turek, Direct numerical simulation of particulate flow via multigrid FEM techniques and the fictitious boundary method, International Journal for Numerical Methods in Fluids 51 (5) (2006) 531–566.DOI
  69. [69]J. Wu, C. Shu, Particulate flow simulation via a boundary condition-enforced immersed boundary-lattice Boltzmann scheme, Communications in Computational Physics 7 (4) (2010) 793–812.DOI
  70. [70]Y. Tang, Y. Yue, S. Wang, Y. Shen, Modeling of gas-solid-liquid flow and particle mixing in a rotary drum, Powder Technology 409 (2022) 117758.DOI
  71. [71]V. Alvarado, E. Manrique, Enhanced oil recovery: An update review, Energies 3 (9) (2010) 1529–1575.DOI
  72. [72]C. Fan, D. Elsworth, S. Li, L. Zhou, Z. Yang, Y. Song, Thermo-hydro-mechanical-chemical couplings controlling CH₄ production and CO₂ sequestration in enhanced coalbed methane recovery, Energy 173 (2019) 1054–1077.DOI
  73. [73]G. Zhou, Z. Chen, W. Ge, J. Li, SPH simulation of oil displacement in cavity-fracture structures, Chemical Engineering Science 65 (11) (2010) 3363–3371.DOI
  74. [74]H. Liang, Z. Chai, B. Shi, Z. Guo, Q. Li, Numerical simulations of immiscible displacement in the cavities via lattice Boltzmann method, International Journal of Modern Physics C 26 (07) (2015) 1550074.DOI
  75. [75]Q. Lou, C. Zang, M. Yang, H. Xu, Lattice Boltzmann simulation of immiscible displacement in the cavity with different channel configurations, International Journal of Modern Physics C 28 (11) (2017) 1750136.DOI

Paper details

vlnc:W_m8h4y95r
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents