betaFeedback

WorksPhysics and Astronomy

Topological signatures of criticality: the Ising case

Abstract

Topological properties of microscopic configurations may provide additional insight into phase transitions beyond conventional thermodynamic observables. We investigate this idea in the two-dimensional Ising model on square and triangular lattices by associating cell complexes with the positive and negative spin domains and constructing an Euler-characteristic observable from their difference. We provide the expression relating this quantity to conventional observables of the Ising model. This derivation allows us to understand its expected behavior physically. As a byproduct, we show that at any finite positive temperature the expectation of the Euler characteristic exceeds a positive, lattice-size-independent bound, hence disproving a previously suggested conjecture. Monte Carlo simulations combined with multihistogram reweighting show that this spin-odd topological observable exhibits order-parameter-like behavior near the ferromagnetic transition. Finite-size scaling of its susceptibility yields pseudocritical temperatures that converge to the known critical temperature for both lattice geometries. On the square lattice, the leading-order estimate of the critical exponent obtained from the topological observable depends more strongly on the fitting range than the magnetization estimate. This behavior is consistent with stronger subleading finite-size corrections, as supported by fits including an additional correction term. On the triangular lattice, the corresponding estimate remains consistent with the theoretical Ising value. Our study suggests that topologically defined quantities such as the Euler characteristic can provide an alternative way to locate order-disorder phase transitions in the systems considered here. Since the definition of these observables is purely geometrical, they can provide useful insights in cases in which order parameters cannot be constructed.

Introduction

Equilibrium phase transitions are conventionally characterized by nonanalyticities of thermodynamic functions in the thermodynamic limit and, for continuous transitions, by the emergence of long-range correlations and universal scaling behavior [1]. In many systems these changes are conveniently detected through an order parameter, such as the magnetization in a ferromagnet. A broader question, however, is whether structural properties of microscopic configurations can themselves provide useful signatures of a phase transition. In particular, topology offers a natural way of characterizing changes in the structural organization of microscopic configurations while remaining insensitive to detailed metric information.

Topology has long been recognized as playing a central physical role in phase transitions. The paradigmatic example is the Berezinskii–Kosterlitz–Thouless transition, which is driven by the binding and unbinding of topological defects [2], but topological properties of extended structures are informative also for conventional order-disorder transitions. In the three-dimensional Ising model, the approach to the critical point is accompanied by a proliferation of handles on the interface between the two magnetized phases [3]; in two dimensions, the Euler–Poincaré characteristic of Fortuin–Kasteleyn clusters singles out the transition point of the Potts model [4], and the mean Euler characteristic and mean Betti numbers of the spin domains of Ising models with arbitrary spin display pronounced changes at the critical point [5].

A conceptually distinct line of work, usually referred to as the topological hypothesis, relates equilibrium phase transitions to changes in the topology of energy sublevel sets in configuration space. For smooth, finite-range and confining potentials with continuous degrees of freedom, such topology changes were originally shown to be necessary for a phase transition [6]. However, this result was challenged by a counterexample involving the two-dimensional lattice ϕ4\phi^4 model [7]. Subsequent work has refined the theoretical framework by accounting for topological changes emerging in the thermodynamic limit [8]. The scope and limitations of this approach are also discussed in Ref. [9], and the framework has been extended to discrete spin systems, including the Ising model [10]. The advent of topological data analysis (TDA) [11–14], and of efficient algorithms for persistent homology in particular [15, 16], turned these ideas into quantitative computational tools, first deployed on dynamically sampled configurations of the mean-field XYXY and ϕ4\phi^4 models [17].

More recently, a novel approach has emerged in which topological invariants are computed configuration by configuration on equilibrium ensembles, and their expectation values are treated as statistical-mechanics observables amenable to finite-size-scaling analysis. In condensed matter and statistical systems, persistent-homology observables have provided interpretable order parameters and machine-learning-free detectors of criticality for Ising and other lattice spin models [18, 19, 20], and have yielded quantitative estimates of critical temperatures and exponents in two-dimensional XYXY models [21]. In quantum field theory, the same strategy has been used to probe center vortices and deconfinement in SU(2)SU(2) gauge theory [22], confinement in non-Abelian lattice gauge theories [23, 24], Z2\mathbb{Z}_2 gauge theories [25], dense QCD effective models [26], and monopole networks in compact U(1)U(1) and SU(3)SU(3) Yang–Mills theory [27, 28]. The present work follows this spirit: rather than studying energy sublevel sets in the full configuration space, we associate a cell complex with each individual spin configuration and ask whether its topology, summarized by the Euler characteristic of the spin domains, changes in a characteristic way across the phase transition.

In the present work, we consider the standard two-dimensional Ising model and ask a deliberately simple question: can the topology of the positive and negative spin domains provide an alternative signature of the ferromagnetic-to-paramagnetic phase transition? To this end, for every spin configuration we associate cell complexes with the two spin domains and compute their Euler characteristics, EC+EC^+ and EC−EC^-. We then consider their half-difference, ECsym=(EC+−EC−)/2EC_{\mathrm{sym}} = (EC^+ - EC^-)/2, and their average, ECavg=(EC++EC−)/2EC_{\mathrm{avg}} = (EC^+ + EC^-)/2. The former is odd under global spin reversal and therefore provides a natural topological analog of the magnetization, whereas the latter provides a spin-reversal-even characterization of the domain topology.

We investigate these observables numerically on square and triangular lattices with periodic boundary conditions, using the magnetization as a benchmark throughout. While earlier studies investigated the Euler characteristics of individual spin domains [5], our analysis focuses on their symmetrized combination as a statistical-mechanics observable. Using Monte Carlo sampling and multihistogram reweighting, we study the temperature dependence and fluctuations of the topological observables, extract pseudocritical temperatures from their susceptibility peaks, and perform a quantitative finite-size scaling analysis. This allows us to test whether the topological signal converges to the known critical point and whether its scaling behavior is robust with respect to the microscopic lattice geometry. We also derive exact relations connecting the symmetrized Euler characteristic to the magnetization and the local geometry of spin configurations, and compare its behavior in different cell-complex representations. We further show that the mean Euler characteristic density, computed using the V-construction, remains strictly positive in the thermodynamic limit at any finite, nonzero temperature, contrary to the conjecture of Blanchard et al. [5]. As we show below, the symmetrized Euler characteristic provides a clear and reproducible signature of the transition, although its finite-size corrections are more pronounced than those observed for the magnetization.

The remainder of the paper is organized as follows. Section II introduces the Ising model and summarizes the finite-size scaling framework used in our analysis. Section III defines the topological constructions and the Euler-characteristic observables associated with the positive and negative spin domains. Section IV describes the Monte Carlo simulations, multihistogram reweighting, and the extraction of pseudocritical points. Section V presents the analytical relations between the observables, together with the numerical results and finite-size scaling analysis for the square and triangular lattices; in this section, we also disprove a conjecture put forward in [5] concerning the behavior of the Euler characteristic at low temperatures. Finally, Sec. VI discusses the implications and limitations of the topological observable, and Sec. VII summarizes our conclusions and perspectives for future work.

Statistical mechanics of the Ising model

To fix the notation and the conventions, we provide a brief overview of the Ising model, certainly the best known and celebrated classical spin system. We consider the ferromagnetic Ising model on two-dimensional periodic lattices. A spin variable si∈{−1,+1}s_i \in\{-1, +1\} is associated with each lattice site ii, and the Hamiltonian is

H({si})=−J∑⟨ij⟩sisj−h∑isi,(1)H(\{s_i\}) = -J \sum_{\langle ij\rangle} s_i s_j - h \sum_i s_i, \tag*{(1)}

where J>0J > 0 is the nearest-neighbor ferromagnetic coupling and hh is the external magnetic field. The sum ⟨ij⟩\langle ij\rangle runs over nearest-neighbor pairs, with four nearest neighbors per site on the square lattice and six on the triangular lattice. Throughout this work we set kB=J=1k_B = J = 1 and perform the simulations at h=0h = 0. For the two-dimensional square lattices considered below, the number of spins is Ns=L2N_s = L^2.

The total magnetization is defined as

M=∑isi,(2)M = \sum_i s_i, \tag*{(2)}

and the magnetization per site is

m=MNs=1Ns∑isi.(3)m = \frac{M}{N_s} = \frac{1}{N_s} \sum_i s_i. \tag*{(3)}

At inverse temperature β=1/T\beta= 1/T, the partition function is

Z(β,h)=∑{si}e−βH({si}),(4)Z(\beta,h) = \sum_{\{s_i\}} e^{-\beta H(\{s_i\})}, \tag*{(4)}

and the equilibrium probability of a configuration is

Pβ({si})=1Ze−βH({si}).(5)P_\beta(\{s_i\}) = \frac{1}{Z}e^{-\beta H(\{s_i\})}. \tag*{(5)}

The free-energy density is

f(β,h)=−1βNslog⁡Z(β,h).(6)f(\beta,h) = -\frac{1}{\beta N_s}\log Z(\beta,h). \tag*{(6)}

At zero field, the Hamiltonian is invariant under the global spin reversal si↦−sis_i \mapsto-s_i. In the thermodynamic limit this Z2\mathbb{Z}_2 symmetry is spontaneously broken below the critical temperature TcT_c, with the magnetization serving as the conventional order parameter. For a finite system at h=0h=0, however, spin-reversal symmetry implies ⟨M⟩=0\langle M\rangle= 0. We therefore use ⟨∣M∣⟩\langle|M|\rangle when displaying the finite-volume order parameter.

The magnetic susceptibility per site is related to magnetization fluctuations by

χm=∂⟨m⟩∂h∣h=0=βNs(⟨m2⟩−⟨m⟩2)=βNs(⟨M2⟩−⟨M⟩2).(7)\begin{aligned} \chi_m = \left.\frac{\partial\langle m\rangle}{\partial h}\right|_{h=0} = \beta N_s\left(\langle m^2\rangle-\langle m\rangle^2\right) \\ &= \frac{\beta}{N_s}\left(\langle M^2\rangle-\langle M\rangle^2\right). \tag*{(7)} \end{aligned}

More generally, for an intensive observable OO we define the corresponding fluctuation susceptibility as

χO=βNs(⟨O2⟩−⟨O⟩2).(8)\chi_O = \beta N_s\left(\langle O^2\rangle-\langle O\rangle^2\right). \tag*{(8)}

This quantity will be used below for both conventional and topological observables.

For finite systems at zero field, where the two magnetized sectors are sampled symmetrically, it is often convenient in numerical finite-size analyses to use the finite-volume fluctuation estimator

χm(L)=βNs(⟨m2⟩−⟨∣m∣⟩2).(9)\chi_m^{(L)} = \beta N_s\left(\langle m^2\rangle-\langle|m|\rangle^2\right). \tag*{(9)}

The corresponding estimators used for the observables considered in the finite-size analysis are specified in Sec. IV.

The two-dimensional ferromagnetic Ising model undergoes a continuous phase transition. For the square lattice the exact critical temperature is

Tcsq=2log⁡(1+2)≃2.269185,(10)T_c^{\mathrm{sq}} = \frac{2}{\log(1+\sqrt{2})} \simeq2.269185, \tag*{(10)}

while for the triangular lattice it is

Tctri=4log⁡3≃3.640957(11)T_c^{\mathrm{tri}} = \frac{4}{\log3} \simeq3.640957 \tag*{(11)}

in the units used here [29, 30]. Both models belong to the two-dimensional Ising universality class. Close to the critical point, the correlation length diverges as

ξ∼∣t∣−ν,t=T−TcTc,(12)\xi\sim|t|^{-\nu}, \qquad t = \frac{T-T_c}{T_c}, \tag*{(12)}

which defines the correlation-length critical exponent ν\nu. For the two-dimensional Ising universality class,

ν=1.(13)\nu= 1. \tag*{(13)}

This value is exact and independent of the lattice geometry within the same universality class [1].

Finite-size scaling

In a finite system of linear size LL, the divergence of the correlation length is cut off when ξ\xi becomes comparable with LL. As a consequence, thermodynamic singularities are rounded and their locations become size dependent. Finite-size scaling relates this dependence to the critical exponents [31].

For a finite-size observable OO, let TOc(L)T_O^c(L) denote the pseudocritical temperature identified from the maximum of its fluctuation susceptibility. To leading order, its shift from the thermodynamic critical temperature scales as

TOc(L)−Tc∼L−1/ν.(14)T_O^c(L)-T_c \sim L^{-1/\nu}. \tag*{(14)}

Subleading corrections generally produce deviations from these asymptotic forms at smaller lattice sizes.

In the numerical analysis below, the magnetization provides a benchmark for this finite-size scaling procedure. We then test whether the pseudocritical temperatures defined from the symmetrized Euler characteristic, ECsymEC_{\mathrm{sym}}, follow the same leading shift form. Importantly, this scaling behavior is not assumed to hold exactly for the topological observable at finite LL; its sensitivity to corrections to scaling is one of the questions investigated in this work.

Topological observables

In this section we introduce some general concepts in homology theory and then specialize them to the case of configurations of the Ising model.

Cubical complexes, simplicial complexes, Euler characteristics

To work with homology theory in the context of the Ising model defined on a square lattice, it is natural to provide a basic exposition of the properties of cubical complexes. The reader will find a more detailed formal introduction to cubical complexes and their homology in [32].

We will denote with [n,n+1][n,n+1] for n∈Nn \in\mathbb{N} as a non-degenerated elementary interval and with [n,n][n,n] a degenerated elementary interval. An elementary cube is then simply a Cartesian product of (degenerated or not) elementary intervals. The number of non-degenerated intervals in the product is a dimension of a cube, while the total number of the elementary intervals in the product is the ambient dimension of the cube.

An important object which relates a cube of dimension n>0n>0 to its boundary is the boundary operator. In this paper, for simplicity, we will consider the boundary operator only over the Z2\mathbb{Z}_2 field. Given a non-degenerated elementary interval [n,n+1][n,n+1], its boundary is defined as

∂[n,n+1]=[n+1,n+1]+[n,n].\partial[n,n+1]=[n+1,n+1]+[n,n].

For a degenerated elementary interval [n,n][n,n] we set ∂[n,n]=0\partial[n,n]=0.

Given a cube C=I1×I2×…×InC=I_1 \times I_2 \times\ldots\times I_n its boundary acts on the factors in turn, ∑i=1nI1×I2×…×∂Ii×…×In\sum_{i=1}^{n} I_1 \times I_2 \times\ldots\times\partial I_i \times\ldots\times I_n, and results in a formal sum of cubes. Such a formal sum of cubes with Z2\mathbb{Z}_2 coefficients is an instance of a type of object called chain. It is a standard to check that ∂∂=0\partial\partial=0.

In addition to cubical complexes that are well-suited to hypercubic lattices, we will also make use of a second class of combinatorial objects suited for lattices with a different microscopic structure. These are simplicial complexes. Again, we will only provide an elementary introduction. For a more detailed and formal treatment, please consult Ref [15].

A kk–simplex will be defined as the convex hull of k+1k+1 affinely independent points v0v_0, v1v_1, …\ldots, vkv_k and will be denoted by [v0,v1,…,vk][v_0,v_1,\ldots,v_k]. Its faces are obtained by taking the convex hulls of all nonempty subsets of its vertex set. Hence vertices, edges, and filled triangles correspond to simplices of dimension 00, 11, and 22, respectively.

Working over the field Z2\mathbb{Z}_2, the boundary of a simplex S=[v0,v1,…,vk]S=[v_0,v_1,\ldots,v_k] is defined as the sum of all (k−1)(k-1)–simplices obtained by removing one vertex:

∂S=[v1,v2,…,vk]+[v0,v2,…,vk]+⋯+[v0,v1,…,vk−1].(15)\partial S=[v_1,v_2,\ldots,v_k]+[v_0,v_2,\ldots,v_k]+\cdots+[v_0,v_1,\ldots,v_{k-1}]. \tag*{(15)}

Extending this rule linearly gives the boundary operator on chains, and, as in the cubical case, one verifies that ∂2=0\partial^2=0.

A simplicial complex KK is a collection of simplices satisfying two conditions:

  1. if S∈KS \in K, then every face FF of SS also belongs to KK;

  2. the intersection of any two simplices in KK is either empty or a face of each.

The dimension of KK is the maximal dimension of a simplex contained in it.

Although their construction differs from the cubical setting introduced earlier, simplicial complexes serve the same purpose: they provide a finite combinatorial toolbox suitable for computing homological invariants.

Homology

Given a cubical or simplicial complex KK, let KiK_i denote the set of all ii-dimensional cells in KK. The iith chain group Ci(K)C_i(K) consists of all Z2\mathbb{Z}_2–linear combinations of elements of KiK_i. The boundary operator extends linearly to chains: if

c=∑S∈KiαSS,(16)c=\sum_{S\in K_i}\alpha_S S, \tag*{(16)}

then

∂c=∑S∈KiαS∂S.(17)\partial c=\sum_{S\in K_i}\alpha_S\partial S. \tag*{(17)}

Thus, ∂:Ci(K)→Ci−1(K)\partial:C_i(K)\to C_{i-1}(K) for every i>0i>0, and in all cases ∂2=0\partial^2=0.

An ii–dimensional chain cc is called a cycle if ∂c=0\partial c=0, and a boundary if there exists d∈Ci+1(K)d\in C_{i+1}(K) with ∂d=c\partial d=c. Every boundary is automatically a cycle, again because ∂2=0\partial^2=0. The subgroups of cycles and boundaries are denoted

Zi(K)=ker⁡∂,Bi(K)=im⁡∂.(18)Z_i(K)=\ker\partial,\qquad B_i(K)=\operatorname{im}\partial. \tag*{(18)}

Homology theory classifies cycles up to boundaries. The iith homology group is defined as

Hi(K)=Zi(K)/Bi(K),H_i(K)=Z_i(K)/B_i(K),

and intuitively measures ii–dimensional “holes” in the complex: connected components for i=0i=0, tunnels for i=1i=1, cavities for i=2i=2, and so on. Two cycles are homologous if they differ by a boundary.

The rank of Hi(K)H_i(K), denoted βi(K)\beta_i(K), is the iith Betti number.

A somewhat more fundamental, but very informative, way of encapsulating information about Betti numbers is an Euler characteristic, EC(K)=∑i=0dim⁡(K)(−1)iβiEC(K)=\sum_{i=0}^{\dim(K)}(-1)^i\beta_i. At the same time EC(K)EC(K) is equal to the alternating sum of number of cells of dimension zero minus number of cells of dimension one plus number of cells in dimension two etc, formally EC(K)=∑i=0dim⁡(K)(−1)i∣Ki∣EC(K)=\sum_{i=0}^{\dim(K)}(-1)^i|K_i|, where ∣⋅∣|\cdot| denotes the cardinality of the complex. The later formula give a clear and efficient way of computing the Euler characteristic from a cubical or simplicial complex alone without a need for Homology groups computations.

From Ising model to cubical complexes

There are two natural ways of associating a cubical complex with a configuration of the Ising model. They differ in the geometric object assigned to an individual spin. We will refer to them as the vertex construction (V-construction) and the top-cell construction (T-construction).

In the V-construction, each lattice site, and hence each spin of the Ising configuration, is identified with a vertex of the underlying cubical lattice. In the T-construction, each spin is instead associated with a top-dimensional cubical cell. Thus, in two dimensions a spin corresponds respectively to either a vertex or an elementary square, while in dd dimensions the corresponding top-dimensional object in the T-construction is a dd-dimensional cube.

In both constructions one must additionally choose which of the two spin values is used to generate the complex. Since the Ising spins take values ++ and −-, either spin domain may be selected. We do not assign any a priori physical preference to either choice and therefore construct both the positive and negative complexes.

Throughout these constructions we impose periodic boundary conditions. The underlying cubical lattice is therefore regarded as a cubical decomposition of the dd-dimensional torus TdT^d, which may be represented by the fundamental domain

[l1min⁡,l1max⁡]×[l2min⁡,l2max⁡]×⋯×[ldmin⁡,ldmax⁡],[l_1^{\min},l_1^{\max}] \times[l_2^{\min},l_2^{\max}] \times\cdots\times[l_d^{\min},l_d^{\max}],

with opposite faces identified.

V-construction

Each lattice site, and hence each spin of the Ising configuration, corresponds to a vertex of the cubical lattice located at the same position. For a chosen spin value, we regard the corresponding vertices as active. For example, choosing the positive spins gives a cubical complex KK whose vertices are those associated with spins of value ++, together with all edges and higher-dimensional cubes whose vertices are all active.

The positive complex, K+K^+, is obtained by taking the vertices corresponding to positive spins as active and including all cubical cells whose vertices are active. Analogously, the negative complex, K−K^-, is obtained by taking the vertices corresponding to negative spins as active. In this way, the two complexes describe the geometric structure of the two spin domains on equal footing.

Let L\mathcal{L} denote the cubical complex associated with the full underlying lattice. The positive and negative complexes are complementary at the level of their vertices: every vertex of the underlying cubical lattice belongs to exactly one of the two complexes. Thus,

V(K+)⊔V(K−)=V(L).V(K^+) \sqcup V(K^-) = V(\mathcal{L}).

This complementarity does not, however, extend to higher-dimensional cells. An edge, or more generally a cubical cell, whose vertices contain both positive and negative spins belongs to neither K+K^+ nor K−K^-. Consequently, the union of the two complexes does not in general reproduce the full cubical decomposition of the lattice.

The geometry of the spin domains suggests a possible relation between β1\beta_1 of one complex and β0\beta_0 of the other: a hole in the positive complex contains spins of the opposite sign, and one might expect it to correspond to a connected component of the negative complex. In the square-lattice V-construction, however, the negative spins within a single hole need not form a connected complex. As illustrated in Figure 1, one hole in the positive complex can contain several disconnected components of the negative complex. The same observation applies with the spin signs exchanged. Thus, there is no one-to-one correspondence between holes in one complex and connected components of the other. Moreover, on the torus, β1\beta_1 also counts independent cycles winding around the periodic directions, which do not necessarily enclose a region.

A simple example illustrating the positive and negative cubical complexes

Figure 1. A simple example illustrating that the number of holes in one cubical complex does not uniquely determine the number of connected components of the opposite complex enclosed within them. The positive (red) complex contains a nontrivial one-dimensional cycle enclosing two distinct connected components of the negative (blue) complex, supported at the vertices [3] ×\times [2] and [4] ×\times [3]. Since a single cycle can also enclose just one connected component, there is no one-to-one correspondence between these two counts.

T-construction

We now consider the T-construction. In this case, each lattice site, and hence each spin of the Ising configuration, is associated with a top-dimensional cubical cell. In dd dimensions this is a dd-dimensional cube, while in two dimensions each spin is represented by an elementary square.

For a chosen spin value, the corresponding top-dimensional cells are included in the complex together with all of their boundary cells. Thus, the positive complex K+K^+ is obtained by including the top-dimensional cells associated with positive spins, together with all their faces, while the negative complex K−K^- is constructed analogously from the negative spins. Including the complete boundaries of the selected top-dimensional cells ensures that the resulting objects are cubical complexes.

In contrast to the V-construction, the positive and negative T-complexes are complementary at the level of their top-dimensional cells: every top-dimensional cell belongs to exactly one of the two complexes. Consequently, their union contains all top-dimensional cells of the underlying cubical decomposition. Since each such cell is included together with its boundary, the two complexes together cover the full cubical complex,

K+∪K−=L.\mathcal{K}^{+} \cup\mathcal{K}^{-} = \mathcal{L}.

The complexes themselves are not, however, disjoint. Top-dimensional cells associated with opposite spin values may share lower-dimensional boundary cells, and therefore

K+∩K−≠∅\mathcal{K}^{+} \cap\mathcal{K}^{-} \ne\varnothing

in general.

As in the V-construction, one may expect a relation between the Betti numbers of the positive and negative complexes. In two dimensions, a nontrivial one-dimensional cycle in one complex may surround a region occupied by top-dimensional cells of the opposite complex, suggesting a possible correspondence between β1\beta_1 of one complex and β0\beta_0 of the other.

Such a correspondence is again not one-to-one. The inclusion of all boundary cells allows top-dimensional cells of the same complex to become connected through lower-dimensional cells. In particular, two regions may meet only at a single vertex and nevertheless belong to the same connected component of the cubical complex. As a result, a region enclosed by a nontrivial cycle of one complex need not constitute a separate connected component of the opposite complex. A simple example is shown in Figure 2.

Figure 2. A simple example illustrating that a hole in one complex need not correspond to a separate connected component of the opposite complex in the T-construction. Suppose that the cubes marked in green belong to the positive complex and those marked in red to the negative complex. The positive complex contains a nontrivial one-dimensional cycle surrounding the negative cube [2,3]×[2,3][2,3] \times[2,3]. However, this cube is connected to the remaining part of the negative complex, through the common vertex [3]×[3][3] \times[3]. Thus, although the two regions meet only at a corner, they belong to the same connected component of the negative cubical complex. The enclosed negative cube therefore does not contribute a separate connected component to β0\beta_0 of the negative complex.

Therefore, although the positive and negative T-complexes are complementary at the level of their top-dimensional cells, their Betti numbers do not satisfy a simple duality relation.

From Ising model to simplicial complexes

In addition to cubical complexes arising from the square lattice, we also consider the two-dimensional Ising model defined on a triangular lattice. In this case, the natural topological representation is a simplicial complex. As in the square-lattice construction, each spin is associated with a vertex located at the corresponding lattice site. For a chosen spin value, the vertices corresponding to spins of that sign are regarded as active. Unlike in the cubical case, we restrict attention to this vertex-based construction and use it throughout the simplicial analysis.

Two active vertices are connected by an edge whenever the corresponding lattice sites are nearest neighbors. Whenever the three vertices of an elementary triangle of the lattice are active, the corresponding two-dimensional simplex is included as well. This defines a simplicial subcomplex of the underlying triangular lattice.

As in the cubical case, we do not assign a preferred role to either spin value. We therefore construct two simplicial complexes for each Ising configuration: the positive complex, obtained by taking the vertices corresponding to positive spins as active, and the negative complex, obtained analogously from the negative spins.

In contrast to the cubical constructions discussed above, the simplicial structure of the triangular lattice avoids the local corner-type connections that obstruct a direct relation [33] between the topology of the two spin domains. Let K+\mathcal{K}^{+} and K−\mathcal{K}^{-} denote the positive and negative spin complexes. When both complexes are nonempty, Alexander–Poincaré duality implies

β0(K−)−1=β1(K+)−r+,β0(K+)−1=β1(K−)−r−,(19)\beta_0(\mathcal{K}^{-})-1 = \beta_1(\mathcal{K}^{+})-r_{+}, \qquad\beta_0(\mathcal{K}^{+})-1 = \beta_1(\mathcal{K}^{-})-r_{-}, \tag*{(19)}

where r±∈{0,1,2}r_{\pm} \in\{0,1,2\} is the number of independent homology classes of cycles in K±\mathcal{K}^{\pm} that remain nontrivial in the ambient torus T2T^2. These terms account for cycles winding around the periodic directions, which need not separate distinct components of the opposite spin complex. For the complementary spin domains on the triangular lattice, these ranks satisfy r++r−=2r_{+}+r_{-}=2. Together with Eq. (19) and β2(K±)=0\beta_{2}(K^{\pm})=0 when both complexes are nonempty, this gives EC+=−EC−EC^{+}=-EC^{-}. If one complex is empty, the other is the full torus, and both Euler characteristics are again zero.

Euler observables

For each Ising configuration, we evaluate separately the Euler characteristics of the positive and negative complexes, denoted by EC+EC^{+} and EC−EC^{-}, respectively. Since the choice of which spin value is labeled positive or negative is a matter of convention, it is natural to combine these quantities into combinations that transform simply under the exchange of the two spin domains.

The symmetrized Euler characteristic is defined as

ECsym=EC+−EC−2.(20)EC_{\mathrm{sym}}=\frac{EC^{+}-EC^{-}}{2}. \tag*{(20)}

Under the exchange of positive and negative spins, ECsymEC_{\mathrm{sym}} changes sign.

The averaged Euler characteristic is defined as

ECavg=EC++EC−2.(21)EC_{\mathrm{avg}}=\frac{EC^{+}+EC^{-}}{2}. \tag*{(21)}

In contrast, ECavgEC_{\mathrm{avg}} is invariant under the exchange of the two spin domains.

Since both Euler characteristics are extensive quantities, we also define their densities per lattice site,

ecsym=ECsymNs,ecavg=ECavgNs.(22)ec_{\mathrm{sym}}=\frac{EC_{\mathrm{sym}}}{N_{\mathrm{s}}},\qquad ec_{\mathrm{avg}}=\frac{EC_{\mathrm{avg}}}{N_{\mathrm{s}}}. \tag*{(22)}

These intensive quantities are used in the numerical analysis and in the definition of the corresponding finite-volume fluctuation estimators. For the square lattice, twice the averaged Euler characteristic density in the V-construction, 2ecavgV2ec_{\mathrm{avg}}^{V}, corresponds to the global Euler characteristic density considered by Blanchard et al. [5] for the standard Ising model (Q=1Q=1).

For the simplicial construction on the triangular lattice, as established above, the positive and negative complexes satisfy

EC+=−EC−,(23)EC^{+}=-EC^{-}, \tag*{(23)}

as a consequence of the duality between the two spin domains on the ambient torus. It follows immediately that

ECavg=0,(24)EC_{\mathrm{avg}}=0, \tag*{(24)}

for every spin configuration, while

ECsym=EC+=−EC−.(25)EC_{\mathrm{sym}}=EC^{+}=-EC^{-}. \tag*{(25)}

Consequently, when the absolute value of the symmetrized Euler characteristic is considered,

∣ECsym∣=∣EC+∣=∣EC−∣.(26)\lvert EC_{\mathrm{sym}}\rvert=\lvert EC^{+}\rvert=\lvert EC^{-}\rvert. \tag*{(26)}

Thus, for the triangular lattice, ECavgEC_{\mathrm{avg}} is identically zero and contains no additional information, whereas ECsymEC_{\mathrm{sym}} fully determines the Euler characteristics of both spin complexes.

We now return to the cubical complexes associated with the square lattice. Although the V- and T-constructions generally assign different cubical complexes to the same Ising configuration, we show that the symmetrized Euler characteristic ECsymEC_{\mathrm{sym}} is identical in the two constructions.

Let

FkV,±F_{k}^{V,\pm}

and

FkT,±F_{k}^{T,\pm}

denote the numbers of kk-dimensional cells in the positive and negative complexes obtained using the V- and T-constructions, respectively. We define

ΔFkV=FkV,+−FkV,−,\Delta F_{k}^{V}=F_{k}^{V,+}-F_{k}^{V,-},

and

ΔFkT=FkT,+−FkT,−.\Delta F_{k}^{T}=F_{k}^{T,+}-F_{k}^{T,-}.

For either construction, the symmetrized Euler characteristic is defined as

ECsym=EC+−EC−2.EC_{\mathrm{sym}}=\frac{EC^{+}-EC^{-}}{2}.

Since in two dimensions

EC±=F0±−F1±+F2±,EC^{\pm}=F_{0}^{\pm}-F_{1}^{\pm}+F_{2}^{\pm},

we obtain

2ECsym=(F0+−F0−)−(F1+−F1−)+(F2+−F2−),2EC_{\mathrm{sym}}=(F_{0}^{+}-F_{0}^{-})-(F_{1}^{+}-F_{1}^{-})+(F_{2}^{+}-F_{2}^{-}),

or equivalently,

2ECsym=ΔF0−ΔF1+ΔF2.2EC_{\mathrm{sym}}=\Delta F_{0}-\Delta F_{1}+\Delta F_{2}.

We now compare the three differences ΔFk\Delta F_{k} in the V- and T-constructions.

First, recall the local geometric correspondence between the two constructions. In the V-construction, each spin is represented by a vertex. An edge is determined by a pair of neighbouring spins, while a two-dimensional square is determined by four spins at its vertices. In the T-construction, each spin is instead represented by a two-dimensional square. An edge lies between two neighbouring squares, while a vertex is incident to four squares. Thus, the roles of zero- and two-dimensional cells are exchanged between the two constructions.

We first compare the vertices of the V-construction with the two-dimensional cells of the T-construction. Both are in one-to-one correspondence with individual spins. A positive spin gives one positive vertex in the V-construction and one positive square in the T-construction, while a negative spin gives one negative vertex and one negative square. Hence

F0V,+=F2T,+,F^{V,+}_{0}=F^{T,+}_{2},

and

F0V,−=F2T,−.F^{V,-}_{0}=F^{T,-}_{2}.

Subtracting these two relations gives

F0V,+−F0V,−=F2T,+−F2T,−,F^{V,+}_{0}-F^{V,-}_{0}=F^{T,+}_{2}-F^{T,-}_{2},

and therefore

ΔF0V=ΔF2T.\Delta F^{V}_{0}=\Delta F^{T}_{2}.

We next compare the edge contributions. Let

E++,E−−,E+−E_{++},\qquad E_{--},\qquad E_{+-}

denote the numbers of nearest-neighbour pairs with spins (++), (−−), and mixed sign, respectively.

In the V-construction, an edge is present in the positive complex only when both of its endpoints carry positive spins, and in the negative complex only when both endpoints carry negative spins. Therefore,

F1V,+=E++,F^{V,+}_{1}=E_{++},

and

F1V,−=E−−.F^{V,-}_{1}=E_{--}.

Hence,

ΔF1V=F1V,+−F1V,−=E++−E−−.\Delta F^{V}_{1}=F^{V,+}_{1}-F^{V,-}_{1}=E_{++}-E_{--}.

In the T-construction, an edge belongs to the positive complex whenever at least one of the two adjacent top-dimensional cells corresponds to a positive spin. Thus,

F1T,+=E+++E+−.F^{T,+}_{1}=E_{++}+E_{+-}.

Analogously,

F1T,−=E−−+E+−.F^{T,-}_{1}=E_{--}+E_{+-}.

The mixed-spin edges are therefore contained in both T-complexes and cancel when the difference between the positive and negative edge counts is taken:

ΔF1T=F1T,+−F1T,−=(E+++E+−)−(E−−+E+−)=E++−E−−.\begin{aligned} \Delta F^{T}_{1}&=F^{T,+}_{1}-F^{T,-}_{1}\\ &=(E_{++}+E_{+-})-(E_{--}+E_{+-})\\ &=E_{++}-E_{--}. \end{aligned}

Comparing with the V-construction gives

ΔF1T=ΔF1V.\Delta F^{T}_{1}=\Delta F^{V}_{1}.

Finally, we compare the vertices of the T-construction with the two-dimensional cells of the V-construction. A vertex in the T-construction is incident to four top-dimensional cells and is therefore associated with the same four spins that determine a square in the V-construction.

Let

N+,N−,NmN_{+},\qquad N_{-},\qquad N_{m}

denote the numbers of local 2×22 \times2 spin configurations which are respectively, entirely positive, entirely negative, or mixed.

In the V-construction, a two-dimensional cell belongs to the positive complex only when all four of its vertices carry positive spins, and to the negative complex only when all four carry negative spins. Therefore,

F2V,+=N+,F^{V,+}_{2}=N_{+},

and

F2V,−=N−.F^{V,-}_{2}=N_{-}.

Hence,

ΔF2V=N+−N−.\Delta F^{V}_{2}=N_{+}-N_{-}.

In the T-construction, a vertex belongs to the positive complex whenever at least one of the four incident top-dimensional cells corresponds to a positive spin, and analogously for the negative complex. Therefore,

F0T,+=N++Nm,F^{T,+}_{0}=N_{+}+N_{m},

while

F0T,−=N−+Nm.F^{T,-}_{0}=N_{-}+N_{m}.

The vertices corresponding to mixed local spin configurations are thus contained in both T-complexes and cancel in the difference. Consequently,

ΔF0T=(N++Nm)−(N−+Nm)=N+−N−.\begin{aligned} \Delta F^{T}_{0}&=(N_{+}+N_{m})-(N_{-}+N_{m})\\ &=N_{+}-N_{-}. \end{aligned}

Comparing the two expressions gives

ΔF0T=ΔF2V.\Delta F^{T}_{0}=\Delta F^{V}_{2}.

Collecting the three relations, we obtain

ΔF0V=ΔF2T,ΔF1V=ΔF1T,ΔF2V=ΔF0T.\Delta F^{V}_{0}=\Delta F^{T}_{2},\qquad \Delta F^{V}_{1}=\Delta F^{T}_{1},\qquad \Delta F^{V}_{2}=\Delta F^{T}_{0}.

The symmetrized Euler characteristic in the V-construction is

2ECsymV=ΔF0V−ΔF1V+ΔF2V,2EC^{V}_{\mathrm{sym}}=\Delta F^{V}_{0}-\Delta F^{V}_{1}+\Delta F^{V}_{2},

while in the T-construction it is

2ECsymT=ΔF0T−ΔF1T+ΔF2T.2EC^{T}_{\mathrm{sym}}=\Delta F^{T}_{0}-\Delta F^{T}_{1}+\Delta F^{T}_{2}.

Using the relations derived above,

2ECsymT=ΔF2V−ΔF1V+ΔF0V.2EC^{T}_{\mathrm{sym}}=\Delta F^{V}_{2}-\Delta F^{V}_{1}+\Delta F^{V}_{0}.

Reordering the terms gives

2ECsymT=ΔF0V−ΔF1V+ΔF2V=2ECsymV.2EC^{T}_{\mathrm{sym}}=\Delta F^{V}_{0}-\Delta F^{V}_{1}+\Delta F^{V}_{2}=2EC^{V}_{\mathrm{sym}}.

Therefore,

ECsymT=ECsymV.EC^{T}_{\mathrm{sym}}=EC^{V}_{\mathrm{sym}}.

Thus, the symmetrized Euler characteristic does not depend on whether the spin configuration is represented using the V- or T-construction. In this sense, ECsymEC_{\mathrm{sym}} defines an observable of the spin configuration itself rather than of the particular cubical realization used to represent it.

We can similarly determine how the averaged Euler characteristic transforms under the change from the V- to the T-construction. Since

2ECavg=EC++EC−,2EC_{\mathrm{avg}}=EC^{+}+EC^{-},

we have

2ECavgT=F0T,++F0T,−−(F1T,++F1T,−)+F2T,++F2T,−.2EC^{T}_{\mathrm{avg}}=F^{T,+}_{0}+F^{T,-}_{0}-\left(F^{T,+}_{1}+F^{T,-}_{1}\right)+F^{T,+}_{2}+F^{T,-}_{2}.

Using the notation introduced above, the numbers of vertices in the two T-complexes are

F0T,+=L2−N−,F0T,−=L2−N+.F^{T,+}_{0}=L^{2}-N_{-},\qquad F^{T,-}_{0}=L^{2}-N_{+}.

Indeed, a vertex is absent from the positive T-complex only when all four incident top-dimensional cells correspond to negative spins, and analogously for the negative complex.

For the edges,

F1T,+=E+++E+−,F1T,−=E−−+E+−,F^{T,+}_{1}=E_{++}+E_{+-},\qquad F^{T,-}_{1}=E_{--}+E_{+-},

while every spin corresponds to exactly one top-dimensional cell, so that

F2T,++F2T,−=L2.F^{T,+}_{2}+F^{T,-}_{2}=L^{2}.

Since the square lattice with periodic boundary conditions contains 2L22L^{2} edges,

E+++E−−+E+−=2L2.E_{++}+E_{--}+E_{+-}=2L^{2}.

It follows that

F1T,++F1T,−=2L2+E+−.F^{T,+}_{1}+F^{T,-}_{1}=2L^{2}+E_{+-}.

Therefore,

2ECavgT=2L2−(N++N−)−(2L2+E+−)+L2=L2−(N++N−)−E+−.(27)\begin{aligned} 2EC^{T}_{\mathrm{avg}}&=2L^{2}-(N_{+}+N_{-})-(2L^{2}+E_{+-})+L^{2}\\ &=L^{2}-(N_{+}+N_{-})-E_{+-}. \tag*{(27)} \end{aligned}

For the V-construction,

F0V,++F0V,−=L2,F^{V,+}_{0}+F^{V,-}_{0}=L^{2},
F1V,++F1V,−=E+++E−−=2L2−E+−,F^{V,+}_{1}+F^{V,-}_{1}=E_{++}+E_{--}=2L^{2}-E_{+-},
F2V,++F2V,−=N++N−.F^{V,+}_{2}+F^{V,-}_{2}=N_{+}+N_{-}.

Hence,

2ECavgV=L2−(2L2−E+−)+(N++N−)=−L2+E+−+N++N−.\begin{aligned} 2EC^{V}_{\mathrm{avg}}&=L^{2}-(2L^{2}-E_{+-})+(N_{+}+N_{-})\\ &=-L^{2}+E_{+-}+N_{+}+N_{-}. \end{aligned}

Comparing the two expressions gives

ECavgT=−ECavgV.(28)EC^{T}_{\mathrm{avg}}=-EC^{V}_{\mathrm{avg}}. \tag*{(28)}

Since the choice between the V- and T-constructions leaves ECsymEC_{\mathrm{sym}} unchanged and affects ECavgEC_{\mathrm{avg}} only by an overall sign, the two constructions carry the same information for the Euler observables considered here. We therefore restrict the following analysis to the T-construction.

Numerical Methods

Update algorithm

The properties of the Ising model can be explored numerically using Markov chain Monte Carlo methods. Successive configurations generated by a Markov chain are generally correlated, and these correlations become particularly important near a critical point because of critical slowing down.

To reduce autocorrelations near the transition, we use the Wolff cluster algorithm [34], combined with Metropolis-Hastings [35] updates. In a Wolff update, a seed spin is chosen at random and a cluster of aligned nearest-neighbor spins is grown by activating bonds with probability

p=1−e−2βJ.(29)p=1-e^{-2\beta J}. \tag*{(29)}

All spins belonging to the resulting cluster are then flipped simultaneously. This non-local update substantially reduces critical slowing down compared with purely local updates.

In the simulations used here, one hybrid update step consists of one complete Metropolis-Hastings sweep over the lattice followed by 15 Wolff cluster updates. After thermalization, observables are measured from the recorded configurations according to

Oˉ=1N∑t=1NO({si}t).(30)\bar{O}=\frac{1}{N}\sum_{t=1}^{N}O(\{s_i\}_t). \tag*{(30)}

where {si}t\{s_i\}_t denotes the ttth recorded configuration and NN is the number of recorded configurations.

Collecting observables

For each generated Ising configuration, we construct the positive and negative complexes using the constructions introduced in Sec. III and evaluate their topological properties. In the cubical case, both the V- and T-constructions are available. Since ECsymEC_{\mathrm{sym}} is the primary Euler observable considered in our analysis and, as shown above, is independent of the choice between these two constructions, we use the T-construction for the cubical simulations.

For each of the two spin domains, we compute the Euler characteristic, Betti numbers, and the numbers of cells of each dimension.

To compute ECEC efficiently in the cubical case, we use a local lookup-table method based on overlapping 2×22 \times2 neighborhoods of spins. There are 24=162^4 = 16 possible spin configurations in such a neighborhood, and a local Euler contribution is precomputed for each of them. Because cells of different dimensions occur with different multiplicities when the overlapping neighborhoods are summed over the periodic lattice, the corresponding dimension-dependent weights are incorporated directly into the lookup-table entries. With this convention, the global Euler characteristic is obtained as

EC=14∑Q∈QECLUT(Q),(31)EC = \frac{1}{4} \sum_{Q \in\mathcal{Q}} EC_{\mathrm{LUT}}(Q), \tag*{(31)}

where Q\mathcal{Q} denotes the set of all overlapping 2×22 \times2 neighborhoods, with periodic boundary conditions, and ECLUT(Q)EC_{\mathrm{LUT}}(Q) is the weighted local contribution associated with the spin configuration in QQ.

Reweighting

For each observable OO, the multihistogram reweighting procedure [36] reconstructs the temperature-dependent expectation value ⟨O⟩T\langle O \rangle_T and the corresponding finite-volume susceptibility curve χO(L)(T)\chi_O^{(L)}(T) over the scanned temperature interval. The reweighting is performed directly on the recorded energies of individual configurations, without energy binning. The specific fluctuation estimator used for the Z2\mathbb{Z}_2-odd observables considered in the finite-size analysis is given in § 1.4 F.

For each lattice size LL, we define the pseudocritical temperature as the location of the maximum of the susceptibility,

TOc(L)=arg max⁡T χO(L)(T).(32)T_O^{c}(L) = \underset{T}{\operatorname{arg\,max}} \, \chi_O^{(L)}(T). \tag*{(32)}

Statistical uncertainties are estimated using a circular moving block bootstrap, as described in § 1.4 F. The complete multihistogram reconstruction is repeated for B=200B = 200 bootstrap replicas, and the uncertainty of TOc(L)T_O^{c}(L) is obtained from the standard deviation of the corresponding bootstrap distribution.

Once the pseudocritical temperatures are determined for all system sizes, we perform a finite-size scaling analysis. In particular, we fit their shift according to

TOc(L)=Tc(∞)+AL−1/ν,(33)T_O^{c}(L) = T_c(\infty) + A L^{-1/\nu}, \tag*{(33)}

to extract Tc(∞)T_c(\infty) and the critical exponent ν\nu.

OpenAI’s ChatGPT (GPT-5.6 and GPT-6) was used to assist with reviewing and debugging the Monte Carlo simulation and multihistogram codes, including checks related to autocorrelations and the implementation of the circular moving block bootstrap. It was also used to assist with developing and refining Python scripts for processing simulation outputs, numerical analysis, and figure generation. The authors specified the computational procedures, reviewed the AI-assisted code modifications, and examined the resulting numerical outputs and diagnostics.

Results

In this section, we analyze numerical results obtained from Monte Carlo simulations of the Ising model on regular square (2D) and triangular (2D) lattices with periodic boundary conditions.

Ensembles of configurations were obtained for a set of values of LL and TT using Monte Carlo methods. A combination of the Metropolis-Hastings (MH) and Wolff update algorithms was used. Starting from a random spin configuration, the system was first thermalized by performing 2000 hybrid update steps. Each hybrid update step consisted of one complete MH sweep over all spins of the lattice, followed by 15 Wolff cluster updates. After thermalization, 200 configurations were recorded for each lattice size and temperature, with successive recorded configurations separated by Ndecorr=10N_{\mathrm{decorr}} = 10 hybrid update steps. The simulations were performed for several lattice sizes. Unless otherwise stated, the presented data correspond to L=3072L = 3072 for both lattice types.

For the square lattice, the temperature range spans from T=2.22T = 2.22 to T=2.32T = 2.32 with a step of ΔT=0.0005\Delta T = 0.0005. For the triangular lattice, the temperature range extends from T=3.62T = 3.62 to T=3.72T = 3.72 with the same step size. In all cases, simulations were initialized with the same random seed (123456) to ensure reproducibility. We additionally examined cross-temperature and cross-size correlations between the recorded Monte Carlo time series and found no systematic evidence of statistically significant linear dependence.

Each configuration consists of spin variables si∈{−1,1}s_i \in\{-1,1\}. For each configuration, the corresponding cubical (or simplicial, in the triangular case) complexes were constructed separately for the positive and negative spin domains.

Validation

To validate the numerical implementation and to provide a reference for the forthcoming topological analysis, we report the raw thermodynamic observables of the Ising model near the critical region. Figure 3 shows the magnetization and total energy values obtained from the recorded configurations at each temperature for the square lattice with periodic boundary conditions. The sharp loss of magnetization near the critical temperature clearly signals the transition from the ferromagnetic to the paramagnetic phase, while the change in the total energy curve signals the approach to the critical temperature. These reference plots illustrate the expected physical behavior and will serve as benchmarks for the topological quantities discussed later.

Magnetization and energy versus temperature for the square-lattice Ising model

Figure 3. Magnetization ⟨∣M∣⟩\langle|M| \rangle (left column) and mean energy ⟨H⟩\langle H \rangle (right column) as functions of temperature for the two-dimensional square-lattice Ising model with periodic boundary conditions (L=3072L = 3072, 200 samples per temperature). Points show sample means at each temperature, and error bars denote block-jackknife standard errors estimated from the recorded Monte Carlo time series. The drop of ⟨∣M∣⟩\langle|M| \rangle and the change in slope of ⟨H⟩\langle H \rangle near TcT_c are consistent with the transition from the ordered to the disordered phase.

Euler characteristics

We now examine the temperature dependence of the symmetrized and averaged Euler characteristics shown in Figure 4. The plotted quantities are not normalized by the number of spins, whereas the corresponding per-spin quantities, ecsymec_{\mathrm{sym}} and ecavgec_{\mathrm{avg}}, are used in the finite-size analysis below. The mean absolute symmetrized Euler characteristic ⟨∣ECsym∣⟩\langle|EC_{\mathrm{sym}}|\rangle follows a trend similar to the mean absolute magnetization ⟨∣M∣⟩\langle|M|\rangle: it decreases smoothly with temperature, with a rapid drop near the critical region. This resemblance suggests that ECsymEC_{\mathrm{sym}} encodes information related to the macroscopic imbalance between the two spin phases through the topology of the spin domains. However, this analogy is restricted to the vicinity of the transition and does not extend to the zero-temperature limit, where ECsymEC_{\mathrm{sym}} vanishes despite the magnetization reaching its maximal magnitude, as discussed below.

Symmetrized and averaged Euler characteristics versus temperature for the square-lattice Ising model

Figure 4. Symmetrized ⟨∣ECsym∣⟩\langle|EC_{\mathrm{sym}}| \rangle (left column) and averaged ⟨ECavg⟩\langle EC_{\mathrm{avg}} \rangle (right column) Euler characteristics as functions of temperature for the two-dimensional square-lattice Ising model with periodic boundary conditions (L=3072L = 3072, 200 samples per temperature). Points show sample means at each temperature, and error bars denote block-jackknife standard errors estimated from the recorded Monte Carlo time series. The behavior of ⟨∣ECsym∣⟩\langle|EC_{\mathrm{sym}}| \rangle parallels that of the magnetization, while ⟨ECavg⟩\langle EC_{\mathrm{avg}} \rangle mirrors the total energy (up to a sign), suggesting a close connection between the Euler observables and the conventional thermodynamic observables MM and HH, which is clarified analytically below.

The averaged Euler characteristic ECavgEC_{\mathrm{avg}} exhibits a different behavior. It decreases monotonically with temperature, showing an inflection-like change near TcT_c. Its overall shape resembles the total energy, up to a change of sign. This resemblance is later explained by an exact relation between ECavgEC_{\mathrm{avg}} and the energy.

In the following analysis, we focus mainly on ECsymEC_{\mathrm{sym}}. The reason is that ECsymEC_{\mathrm{sym}} behaves as an order-parameter-like observable, it is sensitive to the imbalance between positive and negative spin domains and becomes small in the disordered phase. This makes it a natural candidate for testing whether a topological observable of the spin-domain structure can reproduce the critical behavior usually detected through the magnetization.

We therefore use ECsymEC_{\mathrm{sym}} as the main topological observable in the finite-size analysis below. In particular, we investigate whether the pseudocritical temperatures extracted from ECsymEC_{\mathrm{sym}} are compatible with the known critical behavior of the Ising model.

Relation between the symmetrized Euler characteristic and magnetization

The similarity between the symmetrized Euler characteristic and the magnetization observed above can be understood more directly through exact relations between the two quantities. We derive such relations separately for the square and triangular lattices. In both cases, the symmetrized Euler characteristic can be expressed as a contribution proportional to the magnetization together with a local geometric correction measuring the imbalance between fully positive and fully negative local spin configurations.

Square lattice

The similarity between the symmetrized Euler characteristic and the magnetization observed above can be understood more directly through an exact relation between the two quantities. We derive this relation using the T-construction. Since ECsymEC_{\mathrm{sym}} is independent of the choice between the V- and T-constructions, the resulting value of ECsymEC_{\mathrm{sym}} is the same in both cubical representations.

Consider the two-dimensional square lattice. In the T-construction, let Fk±F_k^{\pm} denote the number of kk-dimensional cells in the positive and negative complexes, respectively. Since every spin is represented by a two-dimensional cell,

F2+−F2−=M,(34)F_2^{+}-F_2^{-}=M, \tag*{(34)}

where M=∑isiM=\sum_i s_i denotes the total magnetization.

To express the lower-dimensional cell counts, we classify vertices and edges according to their local spin environment. A vertex of the square lattice is incident on four two-dimensional cells. We denote by F0+4F_0^{+4} and F0−4F_0^{-4} the numbers of vertices for which all four incident cells carry positive or negative spins, respectively. We denote by F0+2F_0^{+2} and F0−2F_0^{-2} the numbers of vertices with local spin imbalance +2+2 and −2-2, corresponding to configurations with three spins of one sign and one spin of the opposite sign. Finally, F00F_0^{0} denotes vertices with two positive and two negative incident cells.

Accordingly, the total numbers of vertices belonging to the positive and negative complexes are

F0+=L2−F0−4,(35)F_0^{+}=L^2-F_0^{-4}, \tag*{(35)}
F0−=L2−F0+4.(36)F_0^{-}=L^2-F_0^{+4}. \tag*{(36)}

Hence,

F0+−F0−=F0+4−F0−4(37)F_0^{+}-F_0^{-}=F_0^{+4}-F_0^{-4} \tag*{(37)}

We classify edges in an analogous way. Each edge is shared by two two-dimensional cells. Let F1+2F_1^{+2} denote the number of edges for which both incident cells carry positive spins, and let F1−2F_1^{-2} denote the corresponding number for negative spins. An edge shared by one positive and one negative cell belongs to both complexes and therefore cancels in the difference F1+−F1−F_1^+ - F_1^-.

Hence only edges whose two incident cells have the same sign contribute to this difference. Therefore,

F1+−F1−=F1+2−F1−2.(38)F_1^+ - F_1^- = F_1^{+2} - F_1^{-2}. \tag*{(38)}

Using

2ECsym=EC+−EC−,(39)2EC_{\mathrm{sym}} = EC^+ - EC^-, \tag*{(39)}

together with

EC±=F0±−F1±+F2±,(40)EC^\pm= F_0^\pm- F_1^\pm+ F_2^\pm, \tag*{(40)}

we obtain

2ECsym=(F0+−F0−)−(F1+−F1−)+(F2+−F2−)=M+(F0+4−F0−4)−(F1+2−F1−2).(41)\begin{aligned} 2EC_{\mathrm{sym}} &= (F_0^+ - F_0^-) - (F_1^+ - F_1^-) + (F_2^+ - F_2^-) \\ &= M + (F_0^{+4} - F_0^{-4}) - (F_1^{+2} - F_1^{-2}). \tag*{(41)} \end{aligned}

To eliminate the edge contribution in Eq. (41), we express the difference F1+2−F1−2F_1^{+2} - F_1^{-2} in terms of the local vertex classes. Since each edge is shared by two neighboring 2×22 \times2 vertex environments, the corresponding edge count appears twice in the incidence sum. A vertex of type +4+4 contributes four +2+2 edges, while a vertex of type +2+2 contributes two; the negative configurations contribute analogously. The balanced F00F_0^0 configurations give equal contributions to the positive and negative edge counts and therefore cancel in the difference. Hence,

2(F1+2−F1−2)=4(F0+4−F0−4)+2(F0+2−F0−2).(42)2\left(F_1^{+2}-F_1^{-2}\right)=4\left(F_0^{+4}-F_0^{-4}\right)+2\left(F_0^{+2}-F_0^{-2}\right). \tag*{(42)}

Multiplying (41) by two and substituting (42), we obtain

4ECsym=2M+2(F0+4−F0−4)−2(F1+2−F1−2)=2M−2(F0+4−F0−4)−2(F0+2−F0−2).(43)\begin{aligned} 4EC_{\mathrm{sym}}=2M+2\left(F_0^{+4}-F_0^{-4}\right)-2\left(F_1^{+2}-F_1^{-2}\right) \\ &=2M-2\left(F_0^{+4}-F_0^{-4}\right)-2\left(F_0^{+2}-F_0^{-2}\right). \tag*{(43)} \end{aligned}

The remaining vertex contribution can be related directly to the magnetization. Summing the local spin imbalance over all vertex environments counts each spin four times, since every two-dimensional cell is incident on four vertices. A vertex of type +4 contributes +4 to this sum, a vertex of type +2 contributes +2, and a balanced vertex contributes zero; the corresponding negative configurations contribute −4 and −2, respectively. Therefore,

4M=4(F0+4−F0−4)+2(F0+2−F0−2).(44)4M=4\left(F_0^{+4}-F_0^{-4}\right)+2\left(F_0^{+2}-F_0^{-2}\right). \tag*{(44)}

Using (44) to eliminate F0+2−F0−2F_0^{+2}-F_0^{-2} from (43), we obtain

4ECsym=−2M+2(F0+4−F0−4),(45)4EC_{\mathrm{sym}}=-2M+2\left(F_0^{+4}-F_0^{-4}\right), \tag*{(45)}

and hence

ECsym=−M2+F0+4−F0−42.(46)EC_{\mathrm{sym}}=-\frac{M}{2}+\frac{F_0^{+4}-F_0^{-4}}{2}. \tag*{(46)}

or

M=−2ECsym+(F0+4−F0−4).(47)M=-2EC_{\mathrm{sym}}+\left(F_0^{+4}-F_0^{-4}\right). \tag*{(47)}

Equation (47) gives an exact decomposition of the magnetization into a contribution proportional to the symmetrized Euler characteristic and a local geometric contribution. The latter measures the imbalance between vertices lying entirely inside positive and negative spin domains, since a vertex contributes to F0+4F_0^{+4} or F0−4F_0^{-4} only when all four incident cells belong to the same spin domain. Also, combining Eqs. (44) and (46) yields

ECsym=F0−2−F0+24.(48)EC_{\mathrm{sym}}=\frac{F_0^{-2}-F_0^{+2}}{4}. \tag*{(48)}

Thus, only vertex environments containing three spins of one sign and one of the opposite sign contribute to this representation: those with three negative spins contribute +1/4, while those with three positive spins contribute −1/4.

Triangular lattice

For the triangular lattice, we consider the simplicial construction introduced above. Let Fk±F_k^{\pm} denote the numbers of kk-simplices in the positive and negative complexes, respectively. In this construction, lattice sites are the 0-simplices, nearest-neighbor pairs of equal sign form 1-simplices, and an elementary triangle forms a 2-simplex when all three of its vertices carry the same spin.

Using

2ECsym=EC+−EC−=(F0+−F0−)−(F1+−F1−)+(F2+−F2−).(49)\begin{aligned} 2EC_{\mathrm{sym}}=EC^{+}-EC^{-} \\ &=\left(F_0^{+}-F_0^{-}\right)-\left(F_1^{+}-F_1^{-}\right)+\left(F_2^{+}-F_2^{-}\right). \tag*{(49)} \end{aligned}

we consider the three contributions separately. Since every lattice site corresponds directly to one spin,

F0+−F0−=M.(50)F_0^{+}-F_0^{-}=M. \tag*{(50)}

The difference between the numbers of positive and negative edges can also be expressed directly in terms of the magnetization. For a nearest-neighbor pair ⟨ij⟩\langle ij\rangle, the contribution to F1+−F1−F_1^{+}-F_1^{-} is +1 if both spins are positive, −1 if both spins are negative, and 0 if the pair contains spins of opposite sign. This contribution can be written compactly as

si+sj2.(51)\frac{s_i+s_j}{2}. \tag*{(51)}

Summing over all nearest-neighbor edges gives

F1+−F1−=12∑⟨ij⟩(si+sj).(52)F_1^{+}-F_1^{-}=\frac{1}{2}\sum_{\langle ij\rangle}(s_i+s_j). \tag*{(52)}

Each site of the triangular lattice has six nearest neighbors, so each spin appears six times in the incidence sum. Therefore,

F1+−F1−=3M.(53)F_1^{+}-F_1^{-}=3M. \tag*{(53)}

Substituting Eqs. (50) and (53) into Eq. (49), we obtain

2ECsym=−2M+(F2+−F2−).(54)2EC_{\mathrm{sym}}=-2M+\left(F_2^{+}-F_2^{-}\right). \tag*{(54)}

Equivalently,

ECsym=−M+12(F2+−F2−),(55)EC_{\mathrm{sym}}=-M+\frac{1}{2}\left(F_2^{+}-F_2^{-}\right), \tag*{(55)}

or

M=−ECsym+12(F2+−F2−).(56)M=-EC_{\mathrm{sym}}+\frac{1}{2}\left(F_2^{+}-F_2^{-}\right). \tag*{(56)}

(56) has the same qualitative structure as the corresponding relation for the square lattice. The additional term measures the imbalance between fully positive and fully negative local simplices. Here, F2+F_2^{+} and F2−F_2^{-} count elementary triangles whose three vertices carry positive or negative spins, respectively.

Taken together, these relations suggest a common interpretation for both lattice geometries. In both decompositions, ECsymEC_{\mathrm{sym}} contains a term proportional to the magnetization with a negative coefficient, together with a local geometric correction; their relative signs therefore depend on the balance between these two contributions. Equivalently, the magnetization can be decomposed into a contribution determined by ECsymEC_{\rm sym} and an additional local geometric contribution. The latter measures the imbalance between structures lying in the interior of positive and negative spin domains: vertices surrounded by four equal spins on the square lattice, and fully occupied elementary triangles on the triangular lattice. These terms therefore probe the local bulk, or thickness, of the corresponding spin domains. In this sense, the magnetization contains both a topological contribution, encoded by ECsymEC_{\rm sym}, and a geometric contribution associated with the interior structure of the domains.

The order-parameter-like behavior of ECsymEC_{\rm sym} near the critical point does not imply the same temperature dependence as the magnetization throughout the ordered phase. In particular, in the zero-temperature limit, all spins are aligned and one of the spin complexes covers the entire torus, whose Euler characteristic vanishes, while the other complex is empty. Consequently, ECsym=0EC_{\rm sym}=0 for both lattice geometries, even though the absolute magnetization reaches its maximum value ∣M∣=Ns\lvert M\rvert=N_s.

Beyond this geometric interpretation, the exact representation shows that ECsymEC_{\rm sym} is a local Z2\mathbb{Z}_2-odd lattice observable, placing it in the same symmetry sector as the magnetization. The implications of this observation for its critical scaling are discussed below.

Relation between the averaged Euler characteristic and energy

A similar relation can be obtained for the averaged Euler characteristic. Here we restrict attention to the square lattice, since this observable vanishes identically on the triangular lattice. Using the T-construction, Eq. (27), and the identifications N+=F0+4N_+=F_0^{+4} and N−=F0−4N_-=F_0^{-4}, we have

2ECavgT=L2−(F0+4+F0−4)−E+−.(57)2EC_{\rm avg}^{T}=L^2-\left(F_0^{+4}+F_0^{-4}\right)-E_{+-}. \tag*{(57)}

The energy can be expressed directly in terms of E+−E_{+-}. On the two-dimensional square lattice with periodic boundary conditions there are 2L22L^2 nearest-neighbour edges. With the convention used here,

H=−2L2+2E+−,(58)H=-2L^2+2E_{+-}, \tag*{(58)}

and therefore

E+−=L2+H2.(59)E_{+-}=L^2+\frac{H}{2}. \tag*{(59)}

Substituting Eq. (59) into Eq. (57), we obtain

2ECavgT=L2−(F0+4+F0−4)−(L2+H2)=−H2−(F0+4+F0−4).(60)\begin{aligned} 2EC_{\rm avg}^{T} &=L^2-\left(F_0^{+4}+F_0^{-4}\right)-\left(L^2+\frac{H}{2}\right)\\ &=-\frac{H}{2}-\left(F_0^{+4}+F_0^{-4}\right). \tag*{(60)} \end{aligned}

Hence,

ECavgT=−H4−F0+4+F0−42.(61)EC_{\rm avg}^{T}=-\frac{H}{4}-\frac{F_0^{+4}+F_0^{-4}}{2}. \tag*{(61)}

Equivalently,

H=−4ECavgT−2(F0+4+F0−4).(62)H=-4EC_{\rm avg}^{T}-2\left(F_0^{+4}+F_0^{-4}\right). \tag*{(62)}

(62) expresses the energy as a contribution proportional to the averaged Euler characteristic together with a local geometric term counting vertices whose four incident two-dimensional cells belong entirely to a single spin domain, irrespective of its sign. This relation also gives a simple interpretation of ECavgTEC_{\rm avg}^{T} in terms of local spin configurations. Around each vertex, configurations with three spins of one sign and one of the opposite sign, as well as configurations with two positive and two negative spins with equal signs adjacent in cyclic order, contain two equal-spin and two opposite-spin pairs, whose energy contributions cancel. The four surrounding pairs contribute −4-4 when all spins are equal and +4+4 when they form a checkerboard pattern. Since each nearest-neighbor bond is counted around two vertices, the total energy is

H=−2(F0+4+F0−4)+2F0C,(63)H=-2\left(F_0^{+4}+F_0^{-4}\right)+2F_0^C, \tag*{(63)}

where F0CF_0^C counts vertices surrounded by a checkerboard pattern and satisfies F0C≤F00F_0^C\leq F_0^0. Substituting this expression into Eq. (61), the contributions from vertices surrounded by four equal spins cancel, leaving

ECavgT=−F0C2.(64)EC_{\rm avg}^{T}=-\frac{F_0^C}{2}. \tag*{(64)}

Implications for the averaged Euler characteristic in the low-temperature phase

The relation derived above allows us to revisit a conjecture proposed by Blanchard et al. [5] concerning the mean Euler characteristic of the two-dimensional Ising model. For the standard Ising case (Q=1Q=1), their global Euler characteristic corresponds to the sum of the Euler characteristics of the positive and negative spin complexes, and thus to twice our averaged Euler characteristic in the V-construction. Using Eq. (28) together with Eq. (64), we obtain

χ(σ)=2ECavgV=F0C,(65)\chi(\sigma)=2EC_{\rm avg}^{V}=F_0^C, \tag*{(65)}

where F0CF_0^C counts elementary plaquettes whose four spins form a checkerboard pattern. For periodic boundary conditions, this identity holds for every spin configuration.

The mean Euler characteristic per site considered in Ref. [5], denoted there by χL(β)\chi_L(\beta), can be expressed in our notation as

ECL(T)=2⟨ECavgV⟩L,TL2=⟨F0C⟩L,TL2=PL,T(Cp).(66)EC_L(T)=\frac{2\langle EC_{\rm avg}^{V}\rangle_{L,T}}{L^2}=\frac{\langle F_0^C\rangle_{L,T}}{L^2}=P_{L,T}(C_p). \tag*{(66)}

where CpC_p denotes the event that the four spins at the vertices of a fixed elementary plaquette pp form a checkerboard pattern.

We can establish a strictly positive lower bound on this probability. For the ferromagnetic Ising model with J=1J = 1 and zero external field, each spin has four nearest neighbors. The conditional probability of either prescribed spin value, given all other spins, is therefore bounded below by

pmin⁡(T)=11+e8/T.(67)p_{\min}(T) = \frac{1}{1 + e^{8/T}}. \tag*{(67)}

By applying the chain rule for conditional probabilities, the probability of any prescribed configuration of four spins is at least pmin⁡4p_{\min}^{4}. Since there are two distinct checkerboard configurations, we obtain

ECL(T)≥2(1+e8/T)4>0.(68)EC_L(T) \ge\frac{2}{\left(1 + e^{8/T}\right)^4} > 0. \tag*{(68)}

Importantly, this lower bound is independent of the lattice size. Consequently,

lim inf⁡L→∞ECL(T)≥2(1+e8/T)4>0(69)\liminf_{L\to\infty} EC_L(T) \ge\frac{2}{\left(1 + e^{8/T}\right)^4} > 0 \tag*{(69)}

for every positive temperature TT. For finite square lattices with open boundaries, the relation between the Euler characteristic and the checkerboard count contains additional boundary contributions of order O(L)O(L). These vanish after normalization by L2L^2 in the thermodynamic limit, leaving the conclusion unchanged.

Blanchard et al. [5] conjectured that the mean Euler characteristic per site vanishes in the thermodynamic limit for T<TcT < T_c. Our result shows that exact vanishing is not possible for the standard Ising model at any positive temperature. Although the checkerboard density becomes very small at low temperatures, it remains strictly positive. This does not exclude its vanishing in the zero-temperature limit T→0T \to0.

Pseudocritical temperatures and finite-size scaling

Having established that the topological observables display temperature dependences similar to standard thermodynamic quantities, we now turn to a quantitative finite-size analysis. In this section we use the multihistogram method to interpolate both physical and topological observables between the simulated temperatures, identify their pseudocritical points, and analyze their scaling with the system size. The magnetization is used as a benchmark for the procedure, while ECsymEC_{\mathrm{sym}} is used to test whether a topological observable extracted from the spin-domain geometry can locate the phase transition quantitatively.

Motivated by the exact relations derived above, we additionally consider the local domain-imbalance contribution DD, defined for the two lattice geometries as

D={F0+4−F0−4,square lattice,12(F2+−F2−),triangular lattice.(70)D = \begin{cases} F_0^{+4} - F_0^{-4}, & \text{square lattice},\\ \frac{1}{2}\left(F_2^{+} - F_2^{-}\right), & \text{triangular lattice}. \end{cases} \tag*{(70)}

With this definition, the exact decompositions take the form

M=−2ECsym+D(71)M = -2EC_{\mathrm{sym}} + D \tag*{(71)}

for the square lattice and

M=−ECsym+D(72)M = -EC_{\mathrm{sym}} + D \tag*{(72)}

for the triangular lattice. We also introduce the corresponding quantity per lattice site,

d=DNs.(73)d = \frac{D}{N_s}. \tag*{(73)}

Its finite-size behavior allows us to determine how the critical information contained in the magnetization is distributed between the topological contribution ecsymec_{\mathrm{sym}} and the remaining local geometric term dd.

We first validate the procedure using the magnetization and then apply the same analysis to ecsymec_{\mathrm{sym}} and dd.

For the Z2\mathbb{Z}_2-odd observables considered in the finite-size analysis, O=m,ecsym,dO = m, ec_{\mathrm{sym}}, d, we use the finite-volume fluctuation estimator

χO(L)=βNs(⟨O2⟩−⟨∣O∣⟩2).(74)\chi_O^{(L)} = \beta N_s \left(\langle O^2\rangle- \langle|O|\rangle^2\right). \tag*{(74)}

In the multihistogram calculation, the absolute value of each observable is stored configuration by configuration. Since ∣O∣2=O2\lvert O\rvert^2 = O^2, multiplying the variance of the stored quantity by NsN_s gives

Ns(⟨O2⟩−⟨∣O∣⟩2),(75)N_s\left(\langle O^2\rangle- \langle|O|\rangle^2\right), \tag*{(75)}

while the factor β=1/T\beta= 1/T is included in the subsequent analysis.

For each lattice size LL and each observable OO, we use multihistogram reweighting [36] to reconstruct the finite-volume susceptibility curve χO(L)(T)\chi_O^{(L)}(T) over the scanned temperature interval. The pseudocritical temperature is identified with the position of its maximum.

To assess the reliability of the multihistogram reconstruction, we examined the overlap between energy distributions at adjacent simulation temperatures. For this diagnostic, the energy distributions were represented by normalized histograms with 25 equally spaced bins over a common energy range for each pair of temperatures. On the square lattice, the minimum overlap decreases from 0.725 at L=64L = 64 to 0.415 at L=3072L = 3072, while the median overlap decreases from 0.825 to 0.615. Thus, although the overlap decreases with increasing system size, the adjacent energy distributions retain appreciable overlap even for the largest systems.

Statistical uncertainties are estimated using a circular moving block bootstrap [37] to account for residual autocorrelations between successive recorded configurations. For each lattice size and simulation temperature, we estimate the integrated autocorrelation time of seven time series:

EE, ∣m∣|m|, ∣ecsym∣|e_{\mathrm{csym}}|, ∣d∣|d|, m2m^2, ecsym2e_{\mathrm{csym}}^2, d2d^2.

For a time series XX, the integrated autocorrelation time is estimated as

τint,X(W)=12+∑t=1WρX(t),(76)\tau_{\mathrm{int},X}(W) = \frac{1}{2} + \sum_{t=1}^{W} \rho_X(t), \tag*{(76)}

where ρX(t)\rho_X(t) denotes the normalized autocorrelation function. The summation window WW is determined self-consistently as the first lag satisfying W>4τint,X(W)W > 4\tau_{\mathrm{int},X}(W) [38]. All autocorrelation times are expressed in units of recorded configurations.

The estimated integrated autocorrelation times were typically close to the independent-sample reference value of τint=1/2\tau_{\mathrm{int}} = 1/2, indicating relatively weak residual temporal correlations between successive recorded configurations. For the square lattice, the largest estimated value was 1.10, with no clear systematic dependence on lattice size. For the triangular lattice, the largest estimate reached 1.99, with increased autocorrelation times of the energy observed for the largest lattice sizes.

For each lattice size LL and simulation temperature TiT_i, the bootstrap block length is determined from the largest estimated autocorrelation time across the seven time series,

ℓ(L,Ti)=⌈10max⁡(12,τmax⁡(L,Ti))⌉.(77)\ell(L,T_i) = \left\lceil10\max\left(\frac{1}{2},\tau_{\max}(L,T_i)\right)\right\rceil. \tag*{(77)}

We generate B=200B = 200 bootstrap replicas. Within each replica, circular blocks are sampled with replacement independently for each simulated temperature until the original number of measurements at that temperature is recovered. The energy and all observables are resampled jointly using the same configuration indices, preserving their within-block correlations.

Although weak residual cross-temperature correlations cannot be entirely excluded, our analysis found no evidence of significant dependence. We therefore do not expect such correlations to materially affect the reported results.

For each bootstrap replica bb, we perform a separate multihistogram reconstruction using the resampled measurements from all simulation temperatures at a given lattice size. The resulting susceptibility curve χO,b(L)(T)\chi_{\mathcal{O},b}^{(L)}(T) is used to determine the pseudocritical temperature

TO,bc(L)=arg max⁡T χO,b(L)(T).(78)T_{\mathcal{O},b}^{c}(L) = \underset{T}{\operatorname{arg\,max}}\ \chi_{\mathcal{O},b}^{(L)}(T). \tag*{(78)}

The final pseudocritical-temperature estimate is the mean of the peak positions obtained from the bootstrap replicas,

T^Oc(L)=1B∑b=1BTO,bc(L),(79)\widehat{T}_{\mathcal{O}}^{c}(L) = \frac{1}{B}\sum_{b=1}^{B} T_{\mathcal{O},b}^{c}(L), \tag*{(79)}

and its statistical uncertainty is estimated by their sample standard deviation,

σTOc(L)=1B−1∑b=1B(TO,bc(L)−T^Oc(L))2.(80)\sigma_{T_{\mathcal{O}}^{c}}(L) = \sqrt{\frac{1}{B-1}\sum_{b=1}^{B}\left(T_{\mathcal{O},b}^{c}(L)-\widehat{T}_{\mathcal{O}}^{c}(L)\right)^2}. \tag*{(80)}

The bootstrap procedure was performed with a fixed random seed of 123456 to ensure reproducibility. The scripts used for bootstrap resampling, multihistogram reconstruction, and pseudocritical-temperature extraction are provided in the accompanying reproducibility repository.

Fit window selection

The finite-size scaling relation in Eq. (33) represents the leading asymptotic behavior as L→∞L \to\infty. For finite lattices, subleading corrections to scaling may be present, so it is important to verify whether the smallest simulated system sizes are already compatible with the leading-order scaling form. We therefore repeat the fits while progressively increasing the lower cutoff Lmin⁡L_{\min} and assess the goodness of fit. This procedure allows us to determine whether excluding smaller lattices is necessary.

For each observable O\mathcal{O}, we perform weighted fits of the pseudocritical temperatures to Eq. (33) for different choices of the lower cutoff Lmin⁡L_{\min}. For each fit, we record the fitted parameters, the reduced χ2\chi^2, and the goodness-of-fit probability

Q=P(χdof2≥χobs2),(81)Q = P\left(\chi_{\mathrm{dof}}^2 \ge\chi_{\mathrm{obs}}^2\right), \tag*{(81)}

where dof=n−k\mathrm{dof} = n-k is the number of degrees of freedom, nn is the number of data points, and k=3k=3 is the number of fitted parameters.

We select the smallest value of Lmin⁡L_{\min} for which Q≥0.05Q \ge0.05, corresponding to the fit that retains the largest number of system sizes while remaining statistically compatible with the leading-order scaling form. As additional consistency checks, we monitor the reduced χ2\chi^2.

For all observables considered on the square lattice, this procedure selects the full fitting range beginning at Lmin⁡=64L_{\min}=64. The fitting window is chosen without constraining the fits to reproduce the known Ising values of TcT_c or ν\nu; agreement with theory is assessed only a posteriori.

As established above, ecsyme_{\mathrm{csym}} and dd can both be expressed as local Z2\mathbb{Z}_2-odd lattice observables and are exactly related to the magnetization through the local decomposition derived above. They therefore belong to the same symmetry sector as mm. Provided that they have a non-vanishing overlap with the leading odd scaling operator, standard renormalization-group arguments imply the same leading asymptotic scaling sector. In particular, the pseudocritical temperatures extracted from mm, ec syme_{\mathrm{c\,sym}}, and dd are expected to approach TcT_c with the same leading shift exponent 1/ν1/\nu. Differences between the fitted values of ν\nu obtained from these observables at finite lattice sizes are therefore naturally interpreted as systematics due to finite-size corrections rather than as evidence for different asymptotic critical behavior.

ObservablennTc(∞)T_c(\infty)ν\nuχ2/dof\chi^2/\mathrm{dof}QQ
ec syme_{\mathrm{c\,sym}}122.269 271(74)0.934(15)1.0780.375
mm122.269 137(82)1.005(18)1.1080.353
dd122.269 118(83)1.014(19)1.1500.323

Table 1. Finite-size scaling results for the 2D square lattice, Lmin⁡=64L_{\min}=64. The goodness-of-fit probability QQ is computed from the χ2\chi^2 distribution with n−3n-3 degrees of freedom.

As visible in Figure 5, the pseudocritical temperatures obtained from all three observables approach the expected critical temperature as the system size increases. The magnetization provides the benchmark case. Its dependence on 1/L1/L is nearly linear and the resulting fit gives an exponent close to the theoretical value ν=1\nu=1. The observable dd shows a very similar finite-size behavior and yields a value of ν\nu consistent with that obtained from the magnetization. The topological observable ec syme_{\mathrm{c\,sym}} follows the same overall convergence toward the critical point, but its dependence on 1/L1/L is less linear over the full range of available sizes. This suggests stronger corrections to the leading finite-size scaling form and is reflected in the effective exponent νec sym=0.934(15)\nu_{e_{\mathrm{c\,sym}}}=0.934(15) obtained from this fit, which deviates significantly from the theoretical value ν=1\nu=1, by approximately 4.4 standard errors. The comparison is based on the fitting window selected using the goodness-of-fit criterion reported in Table I. The stronger curvature observed for ec syme_{\mathrm{c\,sym}} makes it useful to examine more explicitly how the fitted parameters depend on the lower cutoff Lmin⁡L_{\min}.

Finite-size scaling of the pseudocritical temperature

Figure 5. Finite-size scaling of the pseudocritical temperature Tc(L)T_c(L) as a function of 1/L1/L for magnetization, ec syme_{\mathrm{c\,sym}} and dd on the two-dimensional square lattice, together with weighted fits to Eq. (33) in the selected fit window.

Stability under changes of the fit window

The comparison above is based on the fitting window selected using the goodness-of-fit criterion Q≥0.05Q\geq0.05. Since the topological observable shows a less linear dependence on 1/L1/L, we further examine how the fitted parameters depend on the range of lattice sizes included in the fit. We repeat the finite-size scaling fits while varying the lower cutoff Lmin⁡L_{\min} and keeping the upper cutoff Lmax⁡L_{\max} fixed. To check that the conclusions are not driven by the largest available lattice size alone, we perform this analysis for two choices of Lmax⁡L_{\max}, namely the largest and the second-largest available sizes.

Figure 6 shows the resulting estimates of Tc(∞)T_c(\infty) and ν\nu for the magnetization, ec syme_{\mathrm{c\,sym}}, and dd. For the critical temperature, the estimates obtained from all three observables remain close to the theoretical value across the considered fitting windows. The observables show small window-dependent variations, but these variations do not change the overall conclusion that both ec syme_{\mathrm{c\,sym}} and dd give consistent estimates of the transition temperature. The estimates obtained from dd generally follow those obtained from the magnetization closely.

Dependence of fitted parameters on the lower cutoff $L_{\min}$ for the two-dimensional square lattice

Figure 6. Dependence of the fitted parameters on the lower cutoff Lmin⁡L_{\min} used in the finite-size scaling fit for the two-dimensional square lattice. The left and right columns correspond to two choices of the upper cutoff Lmax⁡L_{\max}, given by the largest and the second-largest available lattice sizes. The top row shows the extrapolated critical temperature Tc(∞)T_c(\infty), while the bottom row shows the fitted exponent ν\nu. The horizontal lines indicate the exact two-dimensional Ising values. A small horizontal offset is added to the data points only to improve readability of the error bars.

The differences between the observables are more pronounced for the critical exponent. The estimates obtained from the magnetization and dd remain close to each other and to the theoretical value ν=1\nu=1 over the considered fitting windows, whereas the central values extracted from ec syme_{\mathrm{c\,sym}} show larger deviations on the available lattice sizes. When smaller lattices are excluded, the fits are based on fewer points and the uncertainty intervals become wider. For fits with larger lower cutoffs, the theoretical value falls within the uncertainty range of the ec syme_{\mathrm{c\,sym}} estimates, suggesting that the data remain compatible with the expected exponent, although ec syme_{\mathrm{c\,sym}} does not determine it as sharply as the magnetization and dd.

Extension to the triangular lattice

We repeated the same multihistogram reweighting and finite-size scaling analysis for the two-dimensional Ising model on the triangular lattice. This provides a robustness check for the Euler-based construction. The critical temperature depends on the lattice geometry, while the correlation-length exponent is universal within the two-dimensional Ising universality class and is expected to remain ν=1\nu=1. Table II summarizes the fit results obtained using the same finite-size scaling form as in Eq. (33).

ObservableLmin⁡L_{\min}nnTc(∞)T_c(\infty)ν\nuχ2/dof\chi^2/\mathrm{dof}QQ
ecsyme_{\mathrm{csym}}96113.640 924(112)0.985(20)1.6660.101
mm64123.640 920(100)1.006(16)1.8660.052
dd64123.640 906(101)1.010(16)1.8220.059

Table II. Finite-size scaling results for the 2D triangular lattice. The fitting ranges are selected using the goodness-of-fit criterion Q≥0.05Q \ge0.05.

The goodness-of-fit criterion gives the same lower cutoff, Lmin⁡=64L_{\min}=64, for the magnetization and dd, whereas the selected window for ec syme_{\mathrm{c\,sym}} starts at Lmin⁡=96L_{\min}=96. Thus, the topological observable requires discarding one additional lattice size, indicating that the smallest triangular-lattice systems are less well described by the leading scaling form for ecsyme_{\mathrm{csym}}. All three observables give mutually consistent estimates of the thermodynamic-limit critical temperature. The values obtained from mm, ecsyme_{\mathrm{csym}}, and dd agree within their statistical uncertainties and are close to the expected triangular-lattice critical temperature. This shows that both the topological observable ecsyme_{\mathrm{csym}} and the geometric observable dd recover the location of the transition.

The estimates of the correlation-length exponent are also compatible with the Ising value ν=1\nu= 1 within one statistical standard deviation. The magnetization gives ν=1.006(16)\nu= 1.006(16), dd gives ν=1.010(16)\nu= 1.010(16) and ecsyme_{\mathrm{csym}} gives

ν=0.985(20)\nu= 0.985(20). In contrast to the square-lattice results, the triangular-lattice data, therefore show no appreciable deviation of the central value of νecsym\nu_{e_{\mathrm{csym}}} from the expected Ising value. The main distinction is instead the slightly more restrictive fitting window selected for ecsyme_{\mathrm{csym}}.

Overall, the triangular-lattice analysis shows that both ecsyme_{\mathrm{csym}} and dd provide reliable signatures of the transition. They yield thermodynamic-limit critical temperatures consistent with the magnetization benchmark and exponent estimates compatible with the universal Ising value. For ecsyme_{\mathrm{csym}}, the need to discard one additional lattice size indicates that finite-size corrections remain more relevant for the smallest systems, even though the resulting exponent estimate is fully consistent with ν=1\nu= 1.

Discussion

A natural question is why, on the square lattice, the symmetrized Euler characteristic gives a less stable finite-size estimate of the critical exponent than the magnetization, while the observable dd gives results of comparable quality to mm. As discussed above, standard renormalization-group arguments imply the same leading asymptotic shift exponent for the three observables. The observed differences should therefore be associated with finite-size corrections rather than different asymptotic critical behavior.

To verify this interpretation more explicitly, we repeat the fits of the pseudocritical temperatures with the Ising value ν=1\nu=1 fixed and include the first subleading correction,

Tc(L)=Tc+aL+bL2.(82)T_c(L)=T_c+\frac{a}{L}+\frac{b}{L^2}. \tag*{(82)}

The L−2L^{-2} term is included as a phenomenological subleading correction, without attributing it to a specific irrelevant scaling operator or correction-to-scaling exponent. The resulting parameters are reported in Table III. The leading coefficient aa is consistent across all three observables. By contrast, the subleading coefficient is significantly different from zero for eCsymeC_{\mathrm{sym}}, with beCsym=18.6(4.5)b_{eC_{\mathrm{sym}}}=18.6(4.5), while the corresponding coefficients for mm and dd are consistent with zero.

ObservableTc(∞)T_c(\infty)aabbχ2/dof\chi^2/\mathrm{dof}pp
eCsymeC_{\mathrm{sym}}2.269136(56)2.090(49)17.8(44)1.2380.266
mm2.269133(56)2.090(48)−2.8(42)1.0670.384
dd2.269132(56)2.091(48)−5.1(42)1.0540.394

Table III. Fits of the pseudocritical temperatures on the two-dimensional square lattice to Eq. (82), with the Ising value ν=1\nu=1 fixed and Lmin⁡=64L_{\min}=64.

To determine whether these coefficients differ significantly between observables, we perform a paired bootstrap analysis, preserving the correlations between observables within each lattice size. The resulting differences and their 95% confidence intervals are reported in Table IV. The confidence intervals for both beCsym−bmb_{eC_{\mathrm{sym}}}-b_m and beCsym−bdb_{eC_{\mathrm{sym}}}-b_d exclude zero, indicating statistically significant differences in the fitted subleading coefficients on the square lattice.

ComparisonΔb\Delta b95% CI
beCsym−bmb_{eC_{\mathrm{sym}}}-b_m20.57[17.57, 23.94]
beCsym−bdb_{eC_{\mathrm{sym}}}-b_d22.92[19.64, 26.68]

Table IV. Differences between the subleading correction coefficients for the square lattice, obtained from paired bootstrap resampling of the fits to Eq. (82) with Lmin⁡=64L_{\min}=64. The intervals correspond to the 95% bootstrap percentile confidence intervals.

The microscopic origin of these corrections remains less clear. One possible contributing factor is the different effective resolution of the observables at finite lattice size. The magnetization directly measures the imbalance between positive and negative spins, whereas ECsymEC_{\mathrm{sym}} characterizes the topology of the spin domains through the alternating sum of their Betti numbers. Many microscopically distinct configurations can therefore share the same value of ECsymEC_{\mathrm{sym}}, and local spin rearrangements may leave it unchanged. The observable DD, on the other hand, measures the imbalance between interior points of the positive and negative domains and can distinguish certain local rearrangements that leave ECsymEC_{\mathrm{sym}} unchanged. Differences in the local geometric contributions entering these observables may therefore affect their effective resolution, particularly for smaller lattice sizes.

To probe this difference, we analyze 200 recorded configurations at T=2.269T=2.269, close to the critical temperature of the square-lattice Ising model. All three observables, MM, ECsymEC_{\mathrm{sym}}, and DD, are evaluated on the same configurations. Let KK denote the number of distinct values taken by an observable in the sampled ensemble. Since these values generally occur with different frequencies, we also define the entropy-based effective number of sampled values,

Keff=exp⁡(SSh),SSh=−∑i=1Kpilog⁡pi,(83)K_{\mathrm{eff}}=\exp(S_{\mathrm{Sh}}), \qquad S_{\mathrm{Sh}}=-\sum_{i=1}^{K}p_i\log p_i, \tag*{(83)}

where pip_i is the empirical probability of the iith distinct value. By construction, Keff≤KK_{\mathrm{eff}}\le K, with equality when all distinct values occur with equal probability.

Figure 7 shows the ratios K(ECsym)/K(M)K(EC_{\mathrm{sym}})/K(M) and K(D)/K(M)K(D)/K(M), together with their entropy-based counterparts Keff(ECsym)/Keff(M)K_{\mathrm{eff}}(EC_{\mathrm{sym}})/K_{\mathrm{eff}}(M) and Keff(D)/Keff(M)K_{\mathrm{eff}}(D)/K_{\mathrm{eff}}(M). For the smallest lattice sizes, Keff(ECsym)/Keff(M)<1K_{\mathrm{eff}}(EC_{\mathrm{sym}})/K_{\mathrm{eff}}(M)<1, showing directly that ECsymEC_{\mathrm{sym}} distinguishes fewer effective values in the sampled ensemble than the magnetization. In contrast, DD has an effective resolution comparable to or larger than that of MM.

Effective-resolution ratios for the symmetrized Euler characteristic and observable D relative to magnetization

Figure 7. Effective-resolution ratios for the symmetrized Euler characteristic ECsymEC_{\mathrm{sym}} and the observable DD, relative to the magnetization. The effective number of sampled values is defined as Keff=exp⁡(SSh)K_{\mathrm{eff}}=\exp(S_{\mathrm{Sh}}), where SShS_{\mathrm{Sh}} is the Shannon entropy of the empirical distribution. For the smallest lattice sizes, ECsymEC_{\mathrm{sym}} has a lower effective resolution than MM, whereas DD has a comparable or larger effective resolution. Since only 200 configurations are available at each lattice size, Keff≤200K_{\mathrm{eff}}\le200; the approach of the ratios toward unity at large LL therefore reflects, at least in part, the finite-sample saturation of this measure and should not be interpreted as evidence that the underlying resolutions become equal.

This comparison must, however, be interpreted with an important limitation. Since each empirical distribution is constructed from 200 configurations, KeffK_{\mathrm{eff}} is bounded above by 200 and approaches this value once nearly all sampled configurations yield distinct observable values. Consequently, the apparent convergence of the ratios toward unity at larger LL does not demonstrate that the underlying resolutions become equal; rather, the present statistic loses sensitivity once the finite-sample bound is approached. The analysis therefore provides direct evidence for reduced effective resolution of ECsymEC_{\mathrm{sym}} at small lattice sizes, while remaining inconclusive at larger LL.

This observation is consistent with the Lmin⁡L_{\min} analysis. The largest discrepancy between the estimate of ν\nu obtained from ECsymEC_{\mathrm{sym}} and those obtained from MM and DD occurs when the smallest lattice sizes are included, while the estimates move closer together as these sizes are progressively removed. The explicit subleading fits provide a possible explanation for this behavior: when corrections to the leading finite-size scaling form are neglected, their contribution may be partially absorbed into the fitted exponent, resulting in an effective value of ν\nu that deviates from its asymptotic value.

The effective-resolution analysis offers an additional perspective on why this effect may be more pronounced for ECsymEC_{\mathrm{sym}}. The smallest lattice sizes are also those for which the differences in effective resolution between ECsymEC_{\mathrm{sym}} and the other observables are most apparent. This correspondence suggests that the reduced effective resolution of ECsymEC_{\mathrm{sym}} may contribute to its finite-size behavior, although the present analysis does not establish a causal connection between effective resolution and the subleading corrections. Their microscopic origin therefore remains an open question.

Conclusions

In this work, we constructed observables from the spin-domain structure of the two-dimensional Ising model by associating cubical and simplicial complexes with the positive and negative spin configurations. From the corresponding Euler characteristics, EC+EC^{+} and EC−EC^{-}, we introduced the symmetrized Euler characteristic ECsymEC_{\mathrm{sym}} as a topological observable and considered, in addition, the observable DD, which captures the imbalance associated with interior points of the spin domains. Both quantities were compared with the standard magnetization through finite-size scaling.

The numerical results show that both ECsymEC_{\mathrm{sym}} and DD display order-parameter-like behavior and provide consistent estimates of the critical temperature. In particular, the pseudocritical temperatures obtained from these observables converge to the expected critical point on both the square and triangular lattices. This shows that both the topological and geometric descriptions of the spin-domain organization individually contain sufficient

information to identify the phase transition.

The determination of the critical exponent shows a more differentiated picture. On the square lattice, the estimate of ν\nu obtained from ECsymEC_{\mathrm{sym}} exhibits a stronger dependence on the fitting range than the estimates obtained from MM and DD. Fits with ν=1\nu=1 fixed and a subleading correction term included are consistent with the data, supporting the interpretation that the larger deviation of the leading-order estimate of νECsym\nu_{EC_{\mathrm{sym}}} arises from more pronounced finite-size corrections. The distributional analysis provides an additional perspective, revealing a reduced effective resolution of ECsymEC_{\mathrm{sym}} at smaller lattice sizes, where many microscopically distinct configurations can share the same topological value. This may contribute to the observed finite-size behavior, although the microscopic origin of the corrections remains open. The observable DD, by contrast, retains an effective number of distinguishable values comparable to or larger than that of the magnetization and yields a more stable estimate of ν\nu. On the triangular lattice, the estimate obtained from ECsymEC_{\mathrm{sym}} remains consistent with the theoretical Ising value.

An additional theoretical result concerns the averaged Euler characteristic on the square lattice. Its exact relation to the number of local checkerboard configurations allows us to establish a strictly positive lower bound on the mean Euler characteristic density at any nonzero temperature. This rules out the conjecture proposed by Blanchard et al. [5], according to which this density vanishes in the thermodynamic limit throughout the low-temperature phase.

It is important to emphasize that neither ECsymEC_{\mathrm{sym}} nor DD is introduced here as a new independent order parameter for the Ising model. Both observables are strongly related to the magnetic ordering and should instead be viewed as alternative descriptions of the same underlying transition. Their interest lies in the way they separate different aspects of the spin-domain structure: ECsymEC_{\mathrm{sym}} encodes topological information, while DD is sensitive to geometric differences associated with the interiors of the domains. The comparison between them, therefore, provides a way to distinguish which features of the microscopic configuration are retained or compressed by the Euler-characteristic description.

The magnetization should thus be regarded as a benchmark rather than as a competing observable. The Ising model provides a controlled setting in which these constructions can be tested against well-established critical properties. The results show that topology alone is sufficient to recover the location of the transition, while a combined topological and geometric description retains more of the finite-size information relevant for the extraction of critical exponents. This motivates investigating whether analogous topological and geometric observables can provide useful signatures of phase transitions in other systems, including cases in which conventional order parameters are difficult to identify or do not provide a complete description of the transition.

Acknowledgments

T-SC was partially supported by EPSRC Grant No. EP/R018472/1 while employed as a Research Officer at Swansea University. MM was supported by the Dioscuri program initiated by the Max Planck Society, jointly managed with the National Science Centre, Poland and mutually funded by the Polish Ministry of Science and Higher Education and the German Federal Ministry of Research, Technology and Space. PD and JG were supported by the project “Centre of Trustworthy Artificial Intelligence for Life Sciences” implemented under the International Research Agendas programme of the Foundation for Polish Science co-financed by the European Union under the European Funds for Smart Economy 2021–2027 (FENG). PD acknowledge OpenAI for providing access to ChatGPT Pro used in this work. The work of BL was partly supported by STFC Consolidated Grants No. ST/X00063X/1 and No. UKRI4238. The work of DV was partly supported by STFC Consolidated Grants No. ST/X000680/1 and No. UKRI/ST/C004237/1. This research utilized Queen Mary’s Apocrita HPC facility, supported by QMUL Research-IT [39].

Open Access Statement. For the purpose of open access, the authors have applied a Creative Commons Attribution (CC BY) license to any Author Accepted Manuscript version arising.

Research Data Access Statement. The data and analysis code supporting this manuscript, as well as the Monte Carlo simulation code, will be made publicly available on Zenodo upon publication of the article (Refs. [40, 41]).

AI Declaration. OpenAI’s ChatGPT (GPT-5.6 and GPT-6) and Anthropic’s Claude (Fable 5.1) were used to assist with reviewing the manuscript, checking the consistency of the results, and improving the clarity and language of the text. ChatGPT was also used to assist with developing and debugging simulation and analysis scripts, as described in Sec. IV. The authors reviewed the AI-generated suggestions and take full responsibility for the accuracy of the results, analysis, and interpretations presented in this work.

Author contributions

PD contributed to the original conception of the study, the topological background, and the initial manuscript. BL co-designed the original investigation, suggesting the target model and the use of ensemble averages of topological quantities as phase indicators. BL also contributed to the design of the simulations and analysis strategy, critically discussed the results and their interpretation, drafted the first version of the introduction, and reviewed and commented on the manuscript. DV developed the original Monte Carlo simulation of the Ising model, contributed to a preexisting multihistogram implementation, and contributed to the statistical physics background and the initial manuscript. T-SC further developed the simulation and observable computation code, including the lookup-table method for calculating the Euler characteristic, and contributed to the formulation of the symmetrized Euler characteristic and its extension beyond square lattices. MM extended and corrected the numerical codes, performed the simulations and numerical analysis, derived the theoretical results, prepared the figures, and wrote and revised the majority of the present manuscript. JG supervised the research and contributed through scientific discussions and manuscript review. All authors reviewed and approved the final manuscript.

References

  1. [15]H. Edelsbrunner and J. L. Harer, Computational Topology: An Introduction (AMS, Providence, 2010).
  2. [16]N. Otter, M. A. Porter, U. Tillmann, P. Grindrod, and H. A. Harrington, A roadmap for the computation of persistent homology, Eur. Phys. J. Data Sci. 6, 17 (2017), arXiv:1506.08903 [math.AT].DOI
  3. [17]I. Donato, M. Gori, M. Pettini, G. Petri, S. De Nigris, R. Franzosi, and F. Vaccarino, Persistent homology analysis of phase transitions, Phys. Rev. E 93, 052138 (2016), arXiv:1601.03641 [cond-mat.stat-mech].
  4. [18]A. Cole, G. J. Loges, and G. Shiu, Quantitative and interpretable order parameters for phase transitions from persistent homology, Phys. Rev. B 104, 104426 (2021), arXiv:2009.14231 [cond-mat.stat-mech].DOI
  5. [19]B. Olsthoorn, J. Hellsvik, and A. V. Balatsky, Finding hidden order in spin models with persistent homology, Phys. Rev. Res. 2, 043308 (2020), arXiv:2009.05141 [cond-mat.stat-mech].DOI
  6. [20]Q. H. Tran, M. Chen, and Y. Hasegawa, Topological persistence machine of phase transitions, Phys. Rev. E 103, 052127 (2021), arXiv:2004.03169 [cond-mat.stat-mech].DOI
  7. [21]N. Sale, J. Giansiracusa, and B. Lucini, Quantitative analysis of phase transitions in two-dimensional XY models using persistent homology, Phys. Rev. E 105, 024121 (2022), arXiv:2109.10960 [cond-mat.stat-mech].DOI
  8. [22]N. Sale, B. Lucini, and J. Giansiracusa, Probing center vortices and deconfinement in SU(2) lattice gauge theory with persistent homology, Phys. Rev. D 107, 034501 (2023), arXiv:2207.13392 [hep-lat].DOI
  9. [23]D. Spitz, J. M. Urban, and J. M. Pawlowski, Confinement in non-Abelian lattice gauge theory via persistent homology, Phys. Rev. D 107, 034506 (2023), arXiv:2208.03955 [hep-lat].DOI
  10. [24]D. Spitz, J. M. Urban, and J. M. Pawlowski, Topological data analysis of the deconfinement transition in SU(3) lattice gauge theory, Phys. Rev. D 111, 114519 (2025), arXiv:2412.09112 [hep-lat].DOI
  11. [25]D. Sehayek and R. G. Melko, Persistent homology of Z2 gauge theories, Phys. Rev. B 106, 085111 (2022), arXiv:2201.09856 [cond-mat.stat-mech].
  12. [26]K. Kashiwa, T. Hirakida, and H. Kouno, Persistent homology analysis for dense QCD effective model with heavy quarks, Symmetry 14, 1783 (2022), arXiv:2103.12554 [hep-lat].
  13. [27]X. Crean, J. Giansiracusa, and B. Lucini, Topological data analysis of monopole current networks in U(1) lattice gauge theory, SciPost Phys. 17, 100 (2024), arXiv:2403.07739 [hep-lat].DOI
  14. [28]X. Crean, J. Giansiracusa, and B. Lucini, Simplicity of confinement in SU(3) Yang–Mills theory (2026), arXiv:2602.10088 [hep-lat].arxiv.org/abs/2602.10088
  15. [29]L. Onsager, Crystal statistics. I. A two-dimensional model with an order-disorder transition, Phys. Rev. 65, 117 (1944).DOI
  16. [30]R. M. F. Houtappel, Order-disorder in hexagonal lattices, Physica 16, 425 (1950).
  17. [31]M. E. Fisher and M. N. Barber, Scaling theory for finite-size effects in the critical region, Phys. Rev. Lett. 28, 1516 (1972).
  18. [32]T. Kaczynski, K. Mischaikow, and M. Mrozek, Computational Homology (Springer, New York, 2004).DOI
  19. [33]A. Hatcher, Algebraic Topology (Cambridge University Press, Cambridge, 2002).
  20. [34]U. Wolff, Collective Monte Carlo updating for spin systems, Phys. Rev. Lett. 62, 361 (1989).pubmed.ncbi.nlm.nih.gov/10040213
  21. [35]D. P. Landau and K. Binder, A Guide to Monte Carlo Simulations in Statistical Physics, 4th ed. (Cambridge University Press, Cambridge, 2014).
  22. [36]A. M. Ferrenberg and R. H. Swendsen, Optimized Monte Carlo data analysis, Phys. Rev. Lett. 63, 1195 (1989).
  23. [37]D. N. Politis and J. P. Romano, A circular block-resampling procedure for stationary data, in Exploring the Limits of Bootstrap, edited by R. LePage and L. Billard (Wiley, New York, 1992) pp. 263–270.
  24. [38]N. Madras and A. D. Sokal, The pivot algorithm: A highly efficient Monte Carlo method for the self-avoiding walk, J. Stat. Phys. 50, 109 (1988).DOI
  25. [39]T. King, S. Butcher, and L. Zalewski, Apocrita - High Performance Computing Cluster for Queen Mary University of London (2017).
  26. [40]US, Data release (2026).
  27. [41]US, Code release (2026).

Paper details

vlnc:W_meg2hzpp
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 11

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Claude Fable 5.1 (bare)

View statement
Looking for related papers…
Contents