betaFeedback

WorksPhysics and Astronomy

Second-Order Raman Scattering in Exfoliated Black Phosphorus

Abstract

Second-order Raman scattering has been extensively studied in carbon-based nanomaterials, e.g. nanotube and graphene, because it activates normally forbidden Raman modes that are sensitive to crystal disorder, such as defects, dopants, strain, etc. The sp2^2-hybridized carbon systems are, however, the exception among most nanomaterials, where first-order Raman processes usually dominate. Here we report the identification of four second-order Raman modes, named D1D_1, D1′D_1', D2D_2 and D2′D_2', in exfoliated black phosphorus (P(black)), an elemental direct-gap semiconductor exhibiting strong mechanical and electronic anisotropies. Located in close proximity to the Ag1A^1_g and Ag2A^2_g modes, these new modes dominate at an excitation wavelength of 633 nm. Their evolutions as a function of sample thickness, excitation wavelength, and defect density indicate that they are defect-activated and involve high-momentum phonons in a doubly-resonant Raman process. Ab initio simulations of a monolayer reveal that the D′D' and DD modes occur through intravalley scatterings with split contributions in the armchair and zigzag directions, respectively. The high sensitivity of these DD modes to disorder helps explaining several discrepancies found in the literature.

Introduction

Raman spectroscopy produces rich signals involving not only first-order Raman scattering (one phonon processes), but also higher-order processes that can be efficiently exploited to characterize 2D materials. [1, 2] An intriguing example is the doubly-resonant Raman (DRR) mode [3], known also as the phonon-defect mode, in which an electron-phonon interaction is activated by an impurity, a localized defect, or an edge, and involves a phonon with large quasi-momentum, qq. As prime examples of the phonon-defect modes (DD modes), the so-called DD and D′D' bands in graphene have played an instrumental role in the development of graphene because they provided valuable information on the number of layers [4], the carrier mobility [1], the level of doping [5], the presence of disorder [6], and phonon dispersion [7]. Under specific wavelengths excitation, few studies only have reported the presence of phonon-defect modes in other 2D materials and most, if not all, involved dichalcogenides, such as MoS2_2 [3] [8, 9], WS2_2 [10], WSe2_2 [11] and ReS2_2 [12]. Black phosphorus (P(black)), an elemental semiconductor of P atoms [13, 14], is a particularly interesting case since it presents some of the key elements found in graphene. Besides its lamellar structure, band structure calculations of the isolated monolayer of P(black) predict low energy bands and multiple valleys [15], which can promote, in given conditions, high-order resonances. More specifically, the electronic band structure of the monolayer exhibits a single valence band at the center of the Brillouin zone and two valleys in the conduction band, one of lowest energy centered at Γ\Gamma and another in the zigzag direction [15]. Compared to graphene, few-layer P(black) is, however, significantly different because a reduction of the layer thickness increases the bandgap from 0.34 eV for the bulk [16] to ∼1.7\sim1.7 eV for the monolayer [17, 18], whereas graphene remains semimetallic irrespective of the number of layers. Furthermore, P(black) material is anisotropic [19], which makes it particularly interesting to explore high-order resonances using polarization-resolved Raman spectroscopy.

The monolayer of P(black) is often called phosphorene in the recent literature, but the name 2D-phosphane is used hereafter to better comply with IUPAC nomenclature. [20] Of the six Raman-active modes of the bulk P(black), only three are allowed in the backscattering configuration for all thicknesses down to the monolayer: Ag1A_{g}^{1}, B2gB_{2g} and Ag2A_{g}^{2} [20, 21, 22, 23]. In Ref. [24], we fully characterized these modes for thin layers with polarization-resolved Raman spectroscopy and reported a new first-order mode, labeled Ag2(B2u)A_{g}^{2}(B_{2u}), in samples with a number of atomic layers, nn, between 2 and 5. The latter is nearly degenerate with Ag2A_{g}^{2} and was assigned to a Davydov-induced conversion of the B2uB_{2u} infrared (IR) mode. Additional unexpected Raman features were also observed from pristine and oxidized 2D-phosphane for thicknesses ranging from n=1n = 1 to 5: i) relatively intense shoulders or well-resolved peaks in the close vicinity of Ag1A_{g}^{1} and Ag2A_{g}^{2}; ii) a wide band sensitive to degradation located between B2gB_{2g} and Ag2A_{g}^{2} [20, 24]; and iii) an evolution of the Ag1/Ag2A_{g}^{1}/A_{g}^{2} integrated intensity ratio during sample oxidation in ambient conditions [20]. Unexpected from a first-order Raman analysis, these new Raman features have not yet been the subject of a systematic experimental study and their origins remain largely unexplained.

In this article we present a Raman study of exfoliated P(black) samples with n=1n = 1–7, 9, 12 and 18 layers performed at three excitation wavelengths (λex=488\lambda_{\mathrm{ex}} = 488 nm, 532 nm and 633 nm). The spectra are analyzed and structured according to the explicit trends observed for the mode frequency and intensity as a function of nn and excitation wavelengths. Combined with polarization-resolved experiments, this procedure leads to the identification of four new totally-symmetric modes, labelled D1D_{1}, D1′D'_{1} and D2D_{2}, D2′D'_{2}, which are located very close to the bulk Ag1A_{g}^{1} and Ag2A_{g}^{2} modes, respectively. The degradation kinetics of the trilayer (n=3n = 3) 2D-phosphane indicates that these new Raman modes are sensitive to the presence of defects. Ab initio calculations of the monolayer electronic and phonon band structures and Raman spectra simulations support the assignment that these DD modes are defect-phonon modes due to second-order Raman involving high-qq phonons with dominant contributions either along the zigzag (DD) or armchair (D′D') directions. This assignment is further supported by the observed dependence of the mode intensities on laser frequency and by the change in the intensity ratio of the second to the first-order AgA_g modes with degradation time. Finally, the properties of all Raman modes are reviewed to explain various behaviors reported in the literature, such as shifts in mode frequencies with layer thickness and changes in Ag1/Ag2A_g^1/A_g^2 ratio with degradation.

Results

Bulk P(black) has a base-centered orthorhombic Bravais lattice, a primitive cell containing 4 atoms, and a D2h18\mathrm{D}_{2h}^{18} space group symmetry [25]. Although this group yields 6 Raman-allowed modes, the out-of-plane excitation used in typical backscattering experiments allows for the observation of only three modes: Ag1A_g^1, Ag2A_g^2 and B2gB_{2g}. The AgA_g Raman tensor is composed of three distinct diagonal elements while that of B2gB_{2g} is composed of two identical non-diagonal elements. For 2D-phosphane, the factor-group D2hD_{2h} is preserved irrespective of the sample thickness, which implies that all vibrational modes are non-degenerate and that the bulk nomenclature for identifying these modes remains valid for all nn. Figure 1a presents typical Raman spectra measured at 300 K from several nn-layer 2D-phosphane samples with an excitation wavelength of λex=633\lambda_{\mathrm{ex}} = 633 nm and in the polarization configuration which maximizes the AgA_g intensity (θex.\theta_{\mathrm{ex.}} and θmeas.\theta_{\mathrm{meas.}} both aligned along the armchair direction). As B2gB_{2g} did not reveal any behavior not already reported in the literature, the following discussion is limited to the totally-symmetry modes. In contrast with the single vibrational mode expected from a first-order Raman analysis, excitation at 633 nm leads to rather complex multimode structures in the close vicinity of both Ag1A_g^1 and Ag2A_g^2. The spectra of Figure 1a alone do not allow resolving the overlapping modes, but, since their relative intensities are sensitive to the excitation wavelength, an analysis of the Raman responses obtained at three distinct excitation wavelengths (488, 532, and 633 nm) allows discriminating the various contributions to these multimode structures (see Figure 1b and supplementary, Figure S1). For example, the bilayer multimode structure in the vicinity of Ag1A_g^1 is the sum of three contributions at distinct frequencies: a single mode dominating at 532 nm and two additional and clearly resolved modes at 633 nm.

Raman spectra of 2D-phosphane samples and zooms of multimodal structures

Figure 1. Raman experiments on 2D-phosphane samples with n=1n = 1–7, 9, 12 and 18 layers deposited on a SiO2_2/Si substrate and measured at 300 K. a, Raman spectra taken at λex=633\lambda_{\mathrm{ex}} = 633 nm. b, Zoom of the multimodal structures in the Ag1A_g^1 and Ag2A_g^2 regions at λex=488\lambda_{\mathrm{ex}} = 488 nm (blue), 532 nm (green) and 633 nm (red). In panel a, the spectra are normalized relative to the Ag2A_g^2 maximum and they are vertically shifted and scaled to enhance the weaker Ag1A_g^1 regions. Fit to the multimodal peaks is shown in panel b along with the expected position of each of the DD modes. The spread in frequency of the DD modes are roughly shown using brackets. Dagger symbols mark the wider peaks and highlight nearly degenerated modes.

Three Raman spectra panels for exfoliated 2D-phosphane at excitation wavelengths 488 nm, 532 nm, and 633 nm

Figure S1. Raman experiments on exfoliated 2D-phosphane with n=1n = 1-77, 9, 12 and 18 layers deposited on a SiO2/SiSiO_2/Si substrate at 300 K. Raman spectra at λex=488\lambda_{ex} = 488 nm (a), 532 nm (b) and 633 nm (c). For better clarity, the spectra are normalized relative to the Ag2A_g^2 maximum, vertically shifted and scaled to enhance the weaker Ag1A_g^1 regions. Note that a calibrated energy offset (less than 1 cm−1^{-1}) is applied to the monolayer spectrum at λex=633\lambda_{ex} = 633 nm (recorded at 77 K) to match the Raman shift expected at 300 K.

The frequency and intensity of all Raman modes identified in Figure 1 and Figure S1 are reported in Figure 2 as a function of the number of layer, nn, and excitation wavelength. These results suggests the presence of 6 Raman modes in these two narrow frequency ranges: D1D_1 and D1′D_1' are found near Ag1A_g^1 and D2′D_2' accompanies Ag2A_g^2 and Ag2(B2u)A_g^2(B_{2u}). Several important considerations were used to discriminate the overlapping evolution of these Raman modes with thickness. First, the spectra measured on thick samples (n>10n > 10) should be dominated by the well-established first-order bulk P(black) vibrational modes and should not be sensitive to excitation wavelength. Second, the frequency evolution of first-order allowed Ag2A_g^2 and Davydov-induced Ag2(B2u)A_g^2(B_{2u}) with thickness should be very similar, since they involve nearly degenerate but out-of-phase atomic motions in the armchair direction [24] and have been shown to easily couple and mix character [26]. Third, the intensity of DD and D′D' modes generally increases with the excitation wavelength, reaching a maximum at 633 nm and making it easier to discriminate between first-order (Ag1A_g^1, Ag2A_g^2 and Ag2(B2u)A_g^2(B_{2u})) and DD or D′D' modes. The forth consideration involves resonant effects in the mono- and bilayer. At λex=633\lambda_{\mathrm{ex}} = 633 nm (1.96 eV), the excitation is in near resonance with the optical bandgap of the monolayer (∼1.75\sim1.75 eV) [17, 18]. Similarly, excitation at λex=532\lambda_{\mathrm{ex}} = 532 nm (2.33 eV) is resonant with the transition between the second valence and second conduction bands of the bilayer. [20, 24, 18] These resonant conditions singularly enhance the Raman response from first-order modes and help identify the frequencies of both Ag1A_g^1 and Ag2A_g^2 in the monolayer and bilayer. Finally, polarization-resolved Raman experiments on the D

Evolution of Raman peaks as a function of the number of layers and excitation wavelength

Figure 2. Evolution of the first-order (blue-stripes) and second-order (gray stripes) Raman peaks as a function of the number of layers, nn, and wavelength excitation in the Ag1A_g^1 (a) and Ag2A_g^2 (b) regions. The area of the markers is proportional to the integrated intensity relative to each region. The blue stripes are guides to the eyes for the assignations of the Ag1A_g^1, Ag2A_g^2 and Ag2(B2u)A_g^2(B_{2u}) modes and the gray stripes are the same for the D1D_1, D1′D'_1 and D2′D'_2 modes. The widths of the stripes indicate approximately the spread of the DD modes.

modes reveal that the atomic motions involve crystalline vibrations associated to the AgA_g representation. As a representative example, the polar dependence of D1′D'_1 on a trilayer in a parallel configuration (θex.=θmeas.\theta_{\mathrm{ex.}}=\theta_{\mathrm{meas.}}), shown in Figure S3 (supplementary), is characteristics of a diagonal Raman tensor composed of two anisotropic elements (RaaR_{aa} and RccR_{cc}). Like the case for bulk AgA_g modes, the armchair element dominates (Rcc>RaaR_{cc}>R_{aa}) at lambda=532 nm. [24].

Perpendicular polarization measurements

Figure S3. Perpendicular polarization measurements performed on a n=5n = 5 layer 2D-phosphane presented in Figure 3a-Figure 3c, which are the perpendicular counterparts of the measurements for the Ag1A^{1}_{g}, Ag2A^{2}_{g} and D2D_{2} modes, respectively, as presented in Figure 3d. The parallel polarization, noted D1′D^{\prime}_{1} in ff, comes from a trilayer at λex=532\lambda_{ex} = 532 nm and T=300T = 300 K, with no exposition to ambient condition.

These considerations provides the rationale for the mode assignment illustrated by the colored bands in Figure 2: the purple and gray stripes represent the evolution with thickness of first-order (Ag1A^1_g, Ag2A^2_g and Ag2(B2u)A^2_g(B_{2u})) and D (D1D_1, D1′D'_1, and D2′D'_2) modes, respectively. All first-order vibrational modes soften with increasing layer thickness. This observed trend matches that calculated from density functional theory [27] and confirms the overall validity of the mode assignment. Both D1′D'_1 and D2D_2 increase in frequency with nn, but D2′D'_2 appears to exhibit a non-monotonic dependence. The intensity of D modes fades with nn, which is consistent with bulk-forbidden modes activated through a mechanism that is not of first order. As will be discussed later, no simple thickness dependence can be expected from D modes.

The results presented above were obtained from pristine samples exfoliated in a controlled environment (See Methods). However, important clues on the origin of D modes can be obtained from samples exposed to conditions known to induce degradation [28, 20]. We discuss next the appearance of a fourth D mode and the change in intensity of D1D_1, D1′D'_1, and D2′D'_2, which are found to be much more sensitive to degradation than first-order modes. These observations suggest that additional scattering mechanisms are activated by defects.

D2D_2 appears when pristine black phosphorus is exposed to ambient light and humidity conditions. As shown in Figure 3a, a broad band appears underneath B2gB_{2g} and Ag2A_g^2 after exposing this 5-layer 2D-phosphane sample to ambient light and atmospheric conditions for 15 minutes. This feature can often be observed in samples of suboptimal quality [20], but it has never been discussed. Subsequent exposures to ambient conditions lead to the spectra shown in Figure S2. The ratio of D2D_2 intensity to that of Ag2A_g^2 is shown by the green squares in Figure 3c and shows that the D2D_2 relative intensity grows for the first 15 min of exposure and then remains constant for up to 120 min of cumulative exposure. The polarization response from Ag1A_g^1, Ag2A_g^2 and D2D_2 after 120 min are shown in Figure 3a,Figure 3d. As for the other DD modes, the polarization dependence of D2D_2 is that of a totally symmetric vibrational mode. An analysis of the Raman tensor elements as a function of exposure time is presented in supplementary, Figure S3. Note that the polarization-resolved Raman intensities were adjusted with the dichroism of n=3n = 3 samples and the birefringence of black phosphorus, following the procedure described elsewhere [24]. A detailed analysis of D2D_2 is complicated by its large linewidth, hence we focus next on the other three DD modes first presented in Figure 2.

Presentation of the mode $D_2$ along with its polarization properties and evolution during degradation in ambient conditions

Figure 3. Presentation of the mode D2D_2 along with its polarization properties and evolution during degradation in ambient conditions. a, Sample with n=5n=5 layers at λex=532\lambda_{\mathrm{ex}}=532 nm after an exposure of 15 minutes to ambient conditions at T=300T=300 K. Inset: a polarization plot of the Raman intensity of the D2D_2 mode in the parallel configuration (θexc=θmes\theta_{\mathrm{exc}}=\theta_{\mathrm{mes}}) after 120 minutes in ambient conditions. b, Spectra of the Ag1A^1_g region normalized with the Ag2A^2_g peak after 0, 15, 30, and 120 min exposures in ambient conditions. c, Temporal evolution of integrated intensity of the D2/Ag2D_2/A^2_g (green square) and Ag1/Ag2A^1_g/A^2_g (red circle) ratios. d, Polarization plot of the Raman intensity of the Ag1A^1_g and Ag2A^2_g modes in the parallel configuration after 120 minutes in ambient conditions. The spectra in a is the sum of all of the parallel polarization spectra.

Raman spectra of a five-layer 2D-phosphane sample after different exposure times

Figure S2. Raman spectra of a n=5n = 5 layer 2D-phosphane presented in Figure 3 after an exposure time of 0, 15, 30 and 120 minutes to ambient conditions at T=300T = 300 K.

At 532 nm, the integrated intensity ratio of all Raman features in the vicinity of Ag1A_g^1 to that of all those in the vicinity of Ag2A_g^2, i.e. the Ag1A_g^1(all)/Ag2A_g^2(all) ratio, decreases with exposure time to oxidation in ambient conditions (red circles in Figure 3c), as previously reported [20, 29]. This ratio can be used as a marker for sample quality, but its strong variation is somewhat unexpected from first-order contributions alone, suggesting again that defect-activated scattering mechanisms are involved. This is further illustrated in Figure 4, where the absolute Raman signal measured from a trilayer 2D-phosphane is shown as a function of exposure time to ambient light and humidity conditions and measured at three distinct excitation wavelengths, 488 nm (panels a,ba,b), 532 nm (panels c,dc,d) and 633 nm (panels e,fe,f). To emphasize the effect of degradation on relative intensities, spectra normalized to the intensity of Ag2A_g^2 mode are shown in panels bb, dd, and ff. As noted earlier, the intensity of DD modes are enhanced at longer excitation wavelengths. Therefore, the degradation dynamics at 488 nm (panel aa and bb) are minimally influenced by DD modes, which are overlapping with Ag1A_g^1 and Ag2A_g^2 in the trilayer, and mostly determined by first-order contributions. Although a net decrease in intensity is observed (panel aa), the relative intensity of Ag1A_g^1 (panel bb) barely evolves up to an exposure time of 135 min, indicating that Ag1A_g^1 and Ag2A_g^2 are similarly affected by sample degradation. At 532 nm, the contribution from DD modes becomes more important and significantly affects the relative intensity of Ag1A_g^1. The intensity evolution observed in Figure 3c can be explained by the sensitivity of DD modes to degradation and the fact that two DD modes are found near Ag1A_g^1 against only one near Ag2A_g^2.

Degradation experiment in ambient conditions on a trilayer 2D-phosphane at excitation wavelengths 488 nm, 532 nm and 633 nm

Figure 4. Degradation experiment in ambient conditions on a trilayer 2D-phosphane at λex=488\lambda_{\mathrm{ex}} = 488 nm (a, b), 532 nm (c, d) and 633 nm (e, f) under a constant fluence of 400 μW/μm2\mu\mathrm{W}/\mu\mathrm{m}^{2}. The Ag1A^{1}_{g} and Ag2A^{2}_{g} regions in panels a, c and e are normalized to the silicon peak at ∼520\sim520 cm−1\mathrm{cm}^{-1}. Panels b, d and f present the complete spectra normalized by the Ag2A^{2}_{g} intensity.

As already illustrated in Figure 2, D1′D_1^\prime and D2′D_2^\prime dominate over first-order modes at an excitation wavelength of 633 nm (Figure 4e). However, degradation quickly quenches their intensity, resulting in a significant red-shift and narrowing of the Raman lines. After 135 min, the spectrum is dominated by first-order modes Ag1A_g^1 and Ag2A_g^2. Although the intensity of both Ag1A_g^1 and Ag2A_g^2 is affected by degradation, their relative ratio is not (panel ff), confirming that bulk-like modes are equally affected by degradation.

Our Raman results unambiguously identify several new bulk-forbidden modes in few-layers 2D-phosphane: D1D_1, D1′D_1^\prime, D2D_2 and D2′D_2^\prime. These features add to the other bulk-forbidden modes discussed so far in the literature for n≥2n \ge2 samples: i) The Davydov-induced Ag2(B2u)A_g^2(B_{2u}) mode [24], already presented above, and ii) the breathing modes identified in the low frequency region of the spectrum (≤100 cm−1\le100\ \mathrm{cm}^{-1}) [30, 31]. These modes involve

first-order Raman scattering, whereas the present study suggests that the DD modes are associated to higher-order Raman scattering, a mechanism that is not obvious at first sight. Some elements come, however, in support of a second-order mechanism involving the scattering of a large-qq phonon and a defect. First, the DD modes are present even in the case of the monolayer, which rules out first-order processes such as Davydov-induced modes due to interlayer coupling, Davydov broadening, and other mechanisms related to interlayer interactions. Second, the AgA_g symmetry of D1′D'_1 and D2D_2, as determined by polarization experiments in the inset of Figure 3a (supplementary, Figure S3), indicates that they are crystalline vibrations. Third, the degradation experiments in Figure 3a,Figure 3c demonstrate that the presence of defects increases the relative intensity of the D2D_2 mode. Combined together with the analysis in Figure 4, it appears that all four DD modes share a similar origin.

Inspired by the second-order Raman effects in graphene, namely the phonon-defect (DD band) and the two-phonons (2D2D band) [1], we have explored theoretically all possible mechanisms for DD modes in 2D-phosphane. Figure 5e presents the calculated electronic band structure (see Method) of a monolayer 2D-phosphane, on which we have schematically drawn a phonon-defect scattering process involving a large-qq phonon with a localized defect. The characters of the bands is also indicated, which shows that intra-valley transitions (e.g. between the bands in blue) are active, while inter-valley transitions (mixed coloured bands) are not possible within the energy window considered [32]. As for the possible phonons, we have considered processes of both single phonon of momentum qq and two phonons of opposite qq and appropriate symmetry. Because the two-phonon condition is matched by a rather limited number of available phonons, we have calculated all of the most relevant cases, i.e. the LA+LALA+LA, LA+B2uLA+B_{2u}, B2u+B2uB_{2u}+B_{2u}, B1g+B1gB_{1g}+B_{1g} and B3g+B3gB_{3g}+B_{3g} processes, and found no satisfactory combinations matching the energies of the Ag1A^1_g and Ag2A^2_g regions (supplementary, section S4). We have also considered other multiphonon processes [1] [33, 34], identified in bulk P(black) crystals using Raman [35] and mid-infrared [36] spectroscopies, but they have also been ruled out. That is, the reported broad responses [16] are inconsistent with the sharp signatures of DD modes and the most relevant ones with AgA_g symmetry, i.e. the B1g+B1gB_{1g}+B_{1g} at 386 cm−1386\ \mathrm{cm}^{-1}, the 2Au−Ag22A_u-A^2_g at 353 cm−1353\ \mathrm{cm}^{-1}, and the B3g+B3gB_{3g}+B_{3g} at 444 cm−1444\ \mathrm{cm}^{-1} [27, 25, 37, 38, 39, 40], are all off in frequency. The other alternatives, e.g. the combination of a regular mode and an acoustic phonon of small qq, would add an asymmetrical broadening to first-order modes, which is inconsistent with our data. Furthermore, the thickness dependence involves a crossing in frequency between Ag1A^1_g and D1D_1 and between Ag2A^2_g and D2′D'_2, which is not compatible with the two phonons hypothesis. Considering the calculated phonon diagram (supplementary, Figure S4), this analysis suggests that the phonons related to the Ag1A^1_g and Ag2A^2_g phonon bands located in a region near the center of the zone are the most likely candidates for DD modes.

Phonon-defect scattering model in a monolayer 2D-phosphane

Figure 5. Phonon-defect scattering model in a monolayer 2D-phosphane. a, Calculated phonon-defect modes of a monolayer (black curve) and corresponding Raman spectrum at λex=633\lambda_{\mathrm{ex}} = 633 nm (red curve). b, Calculated phonon-defect modes of a monolayer (black curve) and corresponding Raman spectrum at λex=532\lambda_{\mathrm{ex}} = 532 nm (green curve). c, d, Momentum histogram of the phonon involved in the phonon-defect process at λex=532\lambda_{\mathrm{ex}} = 532 nm superposed on top of the calculated phonon dispersion for the Ag1A^{1}_{g} and Ag2A^{2}_{g} modes, respectively. e, The calculated band structure for the monolayer and the symmetry character (on the right) of the bands at Γ\Gamma. A sketch of an example of a phonon-defect process on top of the electronic band structure of the monolayer in which the excited electron is scattered by a phonon and the hole is scattered by a defect (eheh). A photon is absorbed (upward arrow in green), which promotes the electron-hole pair in the conduction and valence bands. Here, the sketch depicts that the double-resonance occurs through the scattering of a high −q-q phonon (red dash line) in which the electron scatters to a non-virtual state with momentum k+qk+q. The hole is scattered by a defect at k+qk+q (black line) and a photon is emitted when the electron recombines with the hole (downward arrow in green).

Phonon energy calculated for monolayer 2D-Phosphane and bulk P

Figure S4. a, b, Phonon energy calculated respectively for the monolayer 2D-Phosphane and bulk bulk P(black). The red and green curves in a represent the phonon range that is involved in the phonon-defect process simulated for an excitation of λex=633\lambda_{ex} = 633 nm and 532 nm, respectively.

The phonon-defect scattering mechanism is simulated using material properties obtained from density functional theory calculations. To highlight second-order processes, we excluded from the simulation first-order Raman scattering processes and concentrated on the second-order terms that involve one phonon and one defect. In the context of the rigid band approximation, where excited states are given by the differences in the single-electron eigenenergies, the intensity of the second-order Raman scattering mentioned above is given by the following formula [41]:

IDR(ϵ)∝∑q,μ∣∑k,α,ν,cKα(k,q,μ)∣2δ(ϵL−ϵ−ℏω−qμ)[n(ω−qμ)+1](1)I_{\mathrm{DR}}(\epsilon) \propto\sum_{q,\mu} \left| \sum_{k,\alpha,\nu,c} K_{\alpha}(k,q,\mu) \right|^2 \delta\left(\epsilon_L-\epsilon-\hbar\omega_{-q}^{\mu}\right)\left[n\left(\omega_{-q}^{\mu}\right)+1\right] \tag*{(1)}

where the KαK_\alpha represent the different possible processes labeled α\alpha. For instance, the process, illustrated in Figure 5e, where the excited electron is scattered by a phonon and the hole by a defect (eheh) has an amplitude given by:

Keh(k,q,μ)=⟨k,v∣HD∣k+q,v⟩⟨k+q,v∣Dout∣k+q,c⟩⟨k+q,c∣ΔHqμ∣k,c⟩⟨k,c∣Din∣k,v⟩(ϵL−ϵk+qc+ϵk+qv−ℏωqμ)(ϵL−ϵk+qc+ϵkv−ℏωqμ)(ϵL−ϵkc+ϵkv)(2)K_{eh}(\mathbf{k},\mathbf{q},\mu)=\frac{\langle\mathbf{k},v|H_D|\mathbf{k}+\mathbf{q},v\rangle\langle\mathbf{k}+\mathbf{q},v|D_{\mathrm{out}}|\mathbf{k}+\mathbf{q},c\rangle\langle\mathbf{k}+\mathbf{q},c|\Delta H_{\mathbf{q}\mu}|\mathbf{k},c\rangle\langle\mathbf{k},c|D_{\mathrm{in}}|\mathbf{k},v\rangle}{(\epsilon_L-\epsilon_{\mathbf{k}+\mathbf{q}}^c+\epsilon_{\mathbf{k}+\mathbf{q}}^v-\hbar\omega_{\mathbf{q}}^\mu)(\epsilon_L-\epsilon_{\mathbf{k}+\mathbf{q}}^c+\epsilon_{\mathbf{k}}^v-\hbar\omega_{\mathbf{q}}^\mu)(\epsilon_L-\epsilon_{\mathbf{k}}^c+\epsilon_{\mathbf{k}}^v)} \tag*{(2)}

where vv and cc stand for valence and conduction bands, respectively, n(ωqμ)n(\omega_{\mathbf{q}}^\mu) is the Bose-Einstein distribution, ϵL\epsilon_L is the incoming photon energy, DinD_{\mathrm{in}} and DoutD_{\mathrm{out}} are the electron-photon coupling operators for the incoming and outgoing photons, respectively, HDH_D is the defect operator, ΔHqμ\Delta H_{\mathbf{q}\mu} is the electron-phonon coupling operator and ∣kb⟩|\mathbf{k}b\rangle represents an electron in the k\mathbf{k} state in the bb band. All the other equations describing the scattering processes of either holes or electrons by phonons and defects are given in the supplementary.

A double-resonant process occurs when two of the three terms of the denominators of any of the KαK_\alpha in the above equation tend to zero. As depicted in Figure 5e, the physical meaning of this condition implies that the following are satisfied: i) the laser excites resonantly a band to band transition; ii) one of the produced electron or hole is scattered by a phonon with a quasi-momentum and an energy that matches the electronic band states; iii) one of the produced electron or hole is scattered by a defect with a quasi-momentum that matches the electronic band states. Our goal was to identify the phonon energies of all double-resonant processes as they will contribute to the Raman spectrum. Furthermore, because we expect the resonance to be enhanced when the photon energy matches an electronic transition, we considered only processes that satisfy condition i) and searched for events that satisfy either condition ii) or iii). In all cases, these events occur such that, after all scatterings, the electron can recombine with the hole to emit the outgoing photon. More details on the calculations are provided in the supplementary, section S3.

Figure 5a,Figure 5b present the simulation results of the phonon-defect process and compare them with the actual experimental spectra of the monolayer taken at λex=633\lambda_{ex}=633 nm and 532532 nm excitations, respectively. The general signature of the calculated phonon-defect process is the presence of central peaks associated to near-zone-center phonons that are slightly red-shifted from that of the bulk A1g1A_{1g}^{1} and A2g1A_{2g}^{1} modes. These bulk modes are not simulated, but their positions are indicated in the figure by dotted lines. Interestingly, the simulations reveal other features nearby these central peaks. In the A1g1A_{1g}^{1} region, a second peak is resolved on the low-energy side of the central peak. In addition, we note the presence of a small shoulder at λex=532\lambda_{ex}=532 nm that is blue shifted relative to the central peak. Changing the excitation energy leaves the central peak largely unperturbed, but shifts the features on each side (supplementary, Figure S5). The simulation of the A2g1A_{2g}^{1} region is characterized again by a central dominant peak elongated by a wide shoulder. The shoulder extends in the low energy side to a position even below the B2gB_{2g} peak. Changing the excitation wavelength accentuates the shoulder at lower energy and produces two peaks near B2gB_{2g} (supplementary, Figure S5).

Simulations of the phonon-defect process

Figure S5. Simulations of the phonon-defect process. a, b, Simulated Raman spectra of phonon-defect modes for a monolayer excited at energies between 1.9 and 2.4 eV in the Ag1A_g^1 and Ag2A_g^2 mode regions, respectively. c, d, Simulated momentum histogram of the phonons involved in the phonon-defect process at λex=633\lambda_{\mathrm{ex}} = 633 nm in the mode Ag1A_g^1 and Ag2A_g^2 mode regions, respectively. For comparison, the colored line show the region that can participate to the momentum histograms are also shown for excitation energies between 1.9 and 2.4 eV.

The comparison with the experimental results highlights important similarities between theory and experiment. While the spectral overlaps of the central phonon-defect peaks and bulk-allowed modes cannot be disentangled, calculated D1D_1 and D2′D'_2 modes clearly match the experimentally measured shoulders and peaks found in both the A1g1A_{1g}^{1} and A2g1A_{2g}^{1} regions. We note, however, that the experiments on the monolayer do not exhibit the calculated blue shifted shoulder near the A1g1A_{1g}^{1} mode, nor the broad feature between the B2gB_{2g} and A2g1A_{2g}^{1} modes. As discussed below, these features are seen, however, in few layers samples.

Considering the approximations made for the evaluations of the matrix elements (see supplementary), it is noteworthy to mention that the simulations can not reproduce the relative intensity of these phonon-defect modes. The simulations of the double resonances at λex=532\lambda_{\mathrm{ex}} = 532 nm can, however, be rationalized using the phonon dispersion curves as a function of quasi-momentum (qx,qy)(q_x, q_y) shown in Figure 5c,Figure 5d and superposed on top of the momentum (electronic) histograms for the Ag1A_g^1 and Ag2A_g^2 regions, respectively. This superposition highlights, for instance, the distortion in the phonon dispersions and momentum histograms along the zigzag direction, which is due to the important crystal anisotropy of P(black). Surprisingly, the calculations also show a nesting in the resonance profile near Γ\Gamma along the zigzag direction, which is visible in the middle of the histogram as two parallel stripes and pointed doughnut-like shape near q=0q = 0. This nesting is linked to the strong asymmetry of the valence band dispersion (supplementary, Figure S6) and contributes to the unexpectedly narrow peaks seen in the simulated spectra. Hence, these second-order contributions appear similar to the D′D' modes in graphene, except that the strong anisotropy of P(black) splits the contributions according to specific lattice directions.

Four momentum histograms of the phonon-defect process

Figure S6. Simulation details of the phonon-defect process. a, b, Simulated momentum histograms of the phonon involved in the phonon-defect process at λex=633\lambda_{\mathrm{ex}} = 633 nm in the Ag1A^{1}_{g} and Ag2A^{2}_{g} mode regions, respectively. c, d, Momentum histograms of the phonons distributed following the contribution of the path where the phonons are emitted in the conduction band and in the valence band, respectively. A nesting is clearly seen in a, b, d in the middle of the histograms as two narrow stripes in the zigzag direction.

Further analyses of the diagrams in Figure 5c,Figure 5d show that the red-shifted features relative to the central peaks emerge mostly from contributions in the zigzag direction, while the blue shifted features come from the armchair direction. This is visible in the figures by considering the phonon dispersion, which decreases with qq in the zigzag direction and increases in the armchair direction. These characteristics impose a signature or shape for each of the DD modes. For instance, the feature associated to the D1D_1 modes in Figure 5c is very likely due to contributions in the zigzag direction because this is the main direction leading to red-shifted contributions. The strong anisotropy in the dispersion relation was in fact used in our analysis of DD modes to determine the character of the DD and D′D' families associated to dominant contributions in the zigzag and armchair directions, respectively. Obviously, further experiments would be required to provide a more quantitative assignment for each of the DD modes, but this is beyond the scope of the present study. By combining this model and the observations, the origin of the DD modes emerges, nevertheless, as being due to second-order Raman processes involving intra-valley interactions with near-zone-center phonons and defects. The simulations show also that the frequency of the DD modes shifts with the excitation wavelength (supplementary, Figure S5 and Figure S6), but the behavior is rather complex and reflects the anisotropic phonon shifts within the momentum histograms in armchair and zigzag directions.

The evolution of the Raman response with defect density shown in Figure 3 and Figure 4 is consistent with similar simulations of graphene predicting an increase in intensity at low defect density and then a decrease when the exciton diffusion length gets much longer than the defect interaction length [6]. According to this model, only the bulk modes (Ag1A_g^1 and Ag2A_g^2) should survive at very large defect density, which is clearly seen in the results of Figure 4e. Based on our simulations (see more details in the supplementary) and consistent with the numbers given by the suppliers for our P(black) samples (Methods), we estimate a concentration of defects of about 0.005% before degradation. Using the trilayer 2D-phosphane results after 135 min exposure to ambient conditions (Figure 4), we also estimate that a defect concentration of ∼1%\sim1\% is enough to observe sharp bulk-allowed Raman modes, after which broadening and intensity loss are expected. Further experiments using calibrated defect density are required to explore these various regimes.

Because of the nature of the interaction, the Raman intensity of the DD modes should depend on the excitation wavelength, which is also seen in Figure 4. In the case of phonondefect modes associated to Ag1A_g^1, the wavelength dependence is predicted to follow [42]:

I(D1+D1′)I(Ag1)⋅Elaser4=FD(3)\frac{I(D_1+D_1')}{I(A_g^1)} \cdot E_{\mathrm{laser}}^4 = F_D \tag*{(3)}

where I(Ag1)I(A_g^1) and I(D1+D1′)I(D_1+D_1') are the integrated intensities of the first and second-order Raman modes in the Ag1A_g^1 region, respectively. ElaserE_{\mathrm{laser}} is the energy of the excitation and FDF_D is a function with an explicit dependence over the mean distance between defects. The ratio of the Raman spectra presented in Figure 4 was fitted using a model based on random defect distribution and the explicit Elaser4E_{\mathrm{laser}}^4 term for the Raman process. We show in the supplementary, Figure S8, that the experimental (D1+D1′)/Ag1(D_1+D_1')/A_g^1 ratio overlaps nicely with the simulated Elaser4E_{\mathrm{laser}}^4 dependency. This provides yet another support in favour of a phonon-defect scattering mechanism for D modes. Another observation is about the intensity of the D modes compared to first order modes, which is strong here, similar to the D modes in graphene. This behaviour contrasts with other D modes in dichalcogenides [3] [8, 11, 12], which appear much weaker at the defect density considered here.

D modes in two panels showing ratios versus mean distance between defects

Figure S8. DD modes in Ag1A_{g}^{1} to Ag1A_{g}^{1} ratio versus the estimated mean distance between defects (LDL_{D}) at λex=488\lambda_{\mathrm{ex}} = 488 nm, 532 nm and 633 nm. a, b, are respectively the direct (D1+D1′)/Ag1(D_{1}+D_{1}^{\prime})/A_{g}^{1} ratio and the ratio multiplied by the fourth power of the excitation energy. Note that the first Raman spectrum at λex=633\lambda_{\mathrm{ex}} = 633 nm is excluded from the analysis and added by a red star in panel a. The dash line in panel b is a fit based on the equation in Ref. [5].

The peculiar behavior of the Ag1/Ag2A_g^1/A_g^2 ratio at λex=532\lambda_{\mathrm{ex}} = 532 nm with degradation observed in Figure 3 and 4 and reported elsewhere [20] can now be rationalized using the phonon-defect model. For example, the apparent blue shifted Ag1A_g^1 peak in Figure 3b is associated with a change in intensity of the overlapping Ag1A_g^1 and D1D_1, while the broadening of the Ag2A_g^2 mode (supplementary, Figure S2) is associated with a relative increase of the D2′D_2' mode with defect density. Because of the peak degeneracy in Figure 3, the interplay between bulk-modes and D modes is difficult to resolve, but this could be addressed by considering the results in Figure 4 at different excitation wavelengths. At λex=633\lambda_{\mathrm{ex}} = 633 nm, the spectra are dominated by D modes, and hence the Ag1/Ag2A_g^1/A_g^2 ratio remains constant with oxidation time because of a loss of the D-mode intensities in both the Ag1A_g^1 and Ag2A_g^2 regions. The ratio grows only when the intensity of the bulk-allowed modes dominates due to more extensive oxidation. At λex=532\lambda_{\mathrm{ex}} = 532 nm, the relative contributions of D modes are similar to that of bulk modes, but with a bigger contribution of D modes in the Ag1A_g^1 than in the Ag2A_g^2 regions, resulting in an overall decrease of the ratio with oxidation. The situation at λex=488\lambda_{\mathrm{ex}} = 488 nm is similar, but provides lower contributions to the total signal from D modes, which explains the relatively constant ratio with oxidation. In the light of the results in Figure 4, it becomes apparent that the situation at λex=532\lambda_{\mathrm{ex}} = 532 nm fits in a narrow window of excitation energy where defect and bulk mode intensities is well-balanced, giving stronger variations in this ratio for sample quality assessments. Based on the model, we estimate that the intensity of D modes at λex=532\lambda_{\mathrm{ex}} = 532 nm represents nearly half the integrated intensity in the Ag1A_g^1 region of Figure 4c,Figure 4d before degradation and that it decreases much faster than the bulk-allowed Ag1A_g^1 and Ag2A_g^2 modes. This is consistent with an Ag1/Ag2A_g^1/A_g^2 ratio dominated by the phonon-defect modes at low defect level and by the bulk-allowed modes at higher defect level, which favours lower ratios.

A review of the Raman studies reported so far in the literature on mono-, bi- and few-layers 2D-phosphane films prepared using different procedures, such as i) mechanical exfoliation in inert atmosphere [20, 24, 23, 43] and ii) in ambient conditions [31, 44, 30, 21], iii) by ultrasounds in aqueous conditions [45] and iv) using plasma treatments in controlled conditions [46, 22], reveal contradictory results currently undermining the use of Raman spectroscopy for quantitative analysis. For example, no consensus on the frequency evolution of Ag1A_g^1 from P(black) to monolayer 2D-phosphane has so far emerged: some report no obvious shift [30, 22] while others report a red-shift[43, 24]. For the bilayer, many have reported blue-shifts [45, 46, 24, 20], while some have reported a red-shift [23]. We believe that the influence of the newly characterized D modes with defect density in the Ag1A_g^1 region explains these discrepancies. It is interesting to note that red-shifted Ag1A_g^1 in both the monolayer and bilayer measured at λex=532\lambda_{ex}=532 nm were obtained from high-quality samples prepared in environmentally-controlled conditions [24, 23, 43]. As shown in Figure 1b, D1D_1, located below Ag1A_g^1 in the monolayer, dominates the Raman spectrum at 532 nm. However, slight level of degradation induces a fast extinction of D1D_1, which blue shifts of the emission towards that of Ag1A_g^1. Since D1D_1 appears to be present in the highest quality samples, this defect-activated mode can be used as an indicator of sample quality. The data shown in Figure 2b indicates that Ag1A_g^1 blue-shifts from the bulk to the monolayer.

Being less affected by the presence of DD modes, Ag2A_g^2 measured at λex=532\lambda_{ex}=532 nm may prove to be a more useful indicator of sample thickness. Nonetheless, the magnitude of the blue-shift of Ag2A_g^2 reported in the literature for the monolayer varies considerably. For instance, mechanical exfoliation leads to a blue-shift of about 2.0±0.4 cm−12.0 \pm0.4\ \mathrm{cm}^{-1} [31, 43, 23, 20, 24, 30, 21]. Plasma- and ultrasound-based exfoliation in aqueous conditions leads to slightly larger blue-shifts: 2.22.2-3.6 cm−13.6\ \mathrm{cm}^{-1} and 5.0 cm−15.0\ \mathrm{cm}^{-1}, respectively. Our results suggest that shorter excitation wavelengths would lead to more reliable quantitative analyses of few-layer 2D-phosphane by suppressing the influence of DD modes in high-quality samples.

Conclusions

In conclusion, we have characterized the presence of second-order Raman peaks in the spectra of n-layer black phosphorus. Based on the trends observed with sample thickness at three different excitation wavelengths, four new DDR modes, D1D_1, D1′D'_1, D2D_2 and D2′D'_2, are identified in the Ag1A_g^1 and Ag2A_g^2 regions. Using degradation experiments and simulations, we associate these DD modes to bulk-forbidden Raman modes occurring through second-order scattering. The signatures of the D1D_1, D2D_2 and D1′D'_1, D2′D'_2 are due to phonon-defect scattering involving predominantly intra-valley contributions in the zigzag and the armchair directions, respectively. These assignations, along with the sensitivity of DD modes to defects, explain the evolution of the Ag1/Ag2A_g^1/A_g^2 intensity ratio during oxidation experiments. Through the use of the information obtained from DD modes in Raman spectroscopy, the present study rationalizes the discrepancies of Raman peak intensities and frequencies found in the literature and opens at the same time new ways to explore the properties of exfoliated P(black), such as carrier mobility, defect density, doping levels as well as chemical reactivity and mechanical stress.

Methods

Two different sources of black phosphorus samples have been used for the study: Smart Element (99.998% purity) and HQgraphene (99.995% purity). Despite a lower nominal purity, the second source provides wider mono-crystal (∼1 cm2\sim1\ \mathrm{cm}^2) and better processability to make atomically thin layers. The samples were mechanically exfoliated using an adapted scotch-tape method with polydimethylsiloxane (PDMS) stamps [47]. They were transferred on a thermally oxidized (290 nm) silicon substrate that was previously cleaned by acid treatments and baked at 300°C for one hour. The produced thin layers were identified first by optical microscopy using optical contrast measurements and then measured by AFM (AutoProbe CP ThermoMicroscope) to determine the thicknesses before transferring to a Raman cryostat. The procedures were carried out at all times in a purified nitrogen glovebox.

The Raman measurements were performed in a custom micro-Raman set-up at λex=\lambda_{ex}= 488 nm, 532 nm and 633 nm laser excitations. The laser was focused on the sample with a 50 x (NA 0.5) objective with a resolution approaching the diffraction limit and a fluence ranging between 200 and 500 μW⋅μm−2\mu\mathrm{W} \cdot\mu\mathrm{m}^{-2}. The spectra were acquired using a nitrogen cooled charged-coupled device camera (JY Symphony) mounted on a Jobin-Yvon Triax iHR550 spectrometer (grating 1,800 g⋅mm−1g\cdot\mathrm{mm}^{-1} blazed at 630 nm) with a precision of 0.2 cm−1\mathrm{cm}^{-1}. During laser exposure, the sample was maintained in a homemade cell coupled to a vacuum pump providing a residual pressure of <10−5< 10^{-5} Torr. All the spectra were calibrated in energy using the silicon peak at 520 cm−1\mathrm{cm}^{-1}.

All material properties were calculated in the framework of density functional theory (DFT) with a plane wave basis as implemented in the ABINIT code [48]. We used the PBE functional [49] with a van-der-Waals (vdW) correction [50] and a plane wave cutoff energy of 30 Ha. The vdW correction is needed to get an accurate spacing between the layers in bulk P(black) calculations and was kept in the monolayer calculations for consistency. In order to converge the electronic density, we used k-point grids of 12×12×112 \times12 \times1 and 12×12×1212 \times12 \times12 for the monolayer and the bulk, respectively. The phonon dispersion was calculated using density functional perturbation theory [51, 52] with the same converged parameters. The phonon eigenenergies were computed on 12×12×112 \times12 \times1 and 6×6×66 \times6 \times6 q-point grids for the monolayer and bulk, respectively. For the double resonant Raman intensity calculations, band structures for both electrons and phonons required much finer grids. The converged electronic density was used to calculate the electronic band structure on a fine 1000×1000×11000 \times1000 \times1 k-point grid. The monolayer phonon band structure was interpolated on a fine 500×500×1500 \times500 \times1 q-point grid. For the sake of comparisons with experimental results, a scissor shift was applied to the electronic band structure to force the band gap to be the same as seen experimentally.[53] Also, for the phonon band structure, a scale factor was applied to get the same experimental phonon eigenenergies at Γ\Gamma as seen in the Raman spectrum. Details of the electronic structure results are given in the Supporting Information.

Acknowledgements

The authors thank E. Gaufres, D. Cardinal, and P. L. Lévesque for technical assistance and for insightful discussions. This work was made possible by financial support from the Natural Sciences and Engineering Research Council of Canada (NSERC), the Canada Research Chairs program, the Institut de l’Énergie Trottier, and the Fonds de Recherche du Québec - Nature et Technologie (FRQNT). Computations were made on the supercomputer Briarée from Université de Montréal, managed by Calcul Québec and Compute Canada. The operation of this supercomputer is funded by the Canada Foundation for Innovation (CFI), the ministère de l’Économie, de la science et de l’innovation du Québec (MESI) and the Fonds de recherche du Québec - Nature et technologies (FRQNT).

Supplementary file: Second-Order Raman Scattering in Exfoliated Black Phosphorus

Alexandre Favron; Félix Antoine Goudreault; Vincent Gosselin; Julien Groulx; Michel Côté; Richard Leonelli; Jean-Francis Germain; Anne-Laurence Phaneuf-L’Heureux; Sébastien Francoeur; Richard Martel

Additional results in support to the main text are presented in this supporting information. The model used to compute the Raman spectra is also developed in greater details.

Raw Data and Polarization Experiments

The Figure S1 presents the Raman spectra of all of the exfoliated black phosphorus samples at 300 K taken at three excitation wavelengths in the polarization configuration which maximizes the AgA_g signals (θexcitation=θmeasured\theta_{\mathrm{excitation}} = \theta_{\mathrm{measured}}). Figure S2 presents the spectra of a 5-layer 2D-phosphane, presented in Figure 3, in the Ag1A_g^1 region near 468 cm−1\mathrm{cm}^{-1} after multiple consecutive exposures to ambient atmosphere and illumination. The D2D_2 modes increases between 0 and 15 minutes. A small broadening of the Ag2A_g^2 mode is also observed, which is associated to contributions from the D2′D_2' mode.

The evolution of the fitted Raman tensor elements of Ag1A_g^1, Ag2A_g^2 and D2D_2 as a function of cumulative degradation is presented in Figure S3. The RaaR_{aa} and RccR_{cc} represent the diagonal elements in the zigzag and armchair directions, respectively. ψac\psi_{ac} is the relative phase between the aa and cc directions. Information on the simulation details are available in [1]. For both the Ag1A_g^1 and Ag2A_g^2 modes, the Raa/RccR_{aa}/R_{cc} ratios decrease with degradation

due to a loss in anisotropy. In contrast, the ratio is significantly lower for the D2D_{2} mode after 20 min exposure in ambient conditions (Raa/Rcc∼0.1R_{aa}/R_{cc} \sim0.1) and increases by a factor 5 after 120 min degradation. The Figure S3 presents the relative phase ψac\psi_{ac}, but no trend for D2D_{2} can be established. The Figure S3-Figure S3 presents the polarization measurements in perpendicular polarization (θexcitation=θmeasured+90\theta_{excitation} = \theta_{measured} + 90), which complement the polarization presented in Figure 3d, main text. The figure also presents the polarization measurements on a n=3n = 3 layer 2D-phosphane and focuses on the D1′D^{\prime}_{1} mode for which simulations were performed. The Raa/RccR_{aa}/R_{cc} were fitted to 0.32±0.040.32 \pm0.04 and ψac\psi_{ac} to 119±17∘119 \pm17^{\circ}. The tensor ratio (not shown) is very close to that of Ag1A^{1}_{g}, but with a slightly high relative phase (Raa/Rcc=0.45±0.09R_{aa}/R_{cc} = 0.45 \pm0.09 and ψac=91±12∘\psi_{ac} = 91 \pm12^{\circ}).

Electronic structure calculations

The relaxed lattice parameters obtained are: for the bulk case along the zigzag atom arrangement, a1=3.324a_{1} = 3.324 Å, along the armchair atom arrangement, a2=4.425a_{2} = 4.425 Å and perpendicular to the layers, a3=10.470a_{3} = 10.470 Å, and for the monolayer case, a1=3.306a_{1} = 3.306 Å and a2=4.570a_{2} = 4.570 Å. These values are less than 1% away from previous calculations and experimental values.[2]

Figure S4 and Figure S4 shows the phonon band structures on a conventional path in reciprocal space for the monolayer P (black) and bulk P (black), respectively, where branches labels are shown and interesting regions highlighted in green and red. Few differences are noted between both diagrams from what is seen in the figures. Since the monolayer band structure should approach the bulk band structure when adding layers, this gives a good idea of the phonon band structure for any number of layers.

The calculated phonon energies at Γ\Gamma for the monolayer is 352.6352.6 cm−1^{-1} for the Ag1A^{1}_{g} mode and 455.9455.9 cm−1^{-1} for the Ag1=2A^{1}_{g} = 2 mode which are within 3% of the measured values. Note that the phonon energies have been scaled to the experimental values to ease the comparison. Furthermore, the electronic band gap which is known to be underestimated with the functional used has been corrected to the experimental value to ensure that the appropriate electronic states involved in the transition are considered in the calculations.

Phonon-defect model

As mentioned in the main text, we used equation (1) to compute the double resonant Raman spectra:

IDR(ϵ)∝∑q,μ∣∑∣k,α,v,c⟩Kα(k,q,μ)∣2δ(ϵL−ϵ−ℏω−qμ)[n(ω−qμ)+1]I_{\mathrm{DR}}(\epsilon) \propto\sum_{\mathbf{q},\mu} \left|\sum_{\lvert k,\alpha,v,c\rangle} K_{\alpha}(\mathbf{k},\mathbf{q},\mu)\right|^2 \delta(\epsilon_L-\epsilon-\hbar\omega_{-\mathbf{q}}^\mu)[n(\omega_{-\mathbf{q}}^\mu)+1]

where all the considered KαK_{\alpha} terms are listed below:

Kee(k,q,μ)=⟨k,v∣Dout∣k,c⟩⟨k,c∣HD∣k+q,c⟩⟨k+q,c∣ΔHqμ∣k,c⟩⟨k,c∣Din∣k,v⟩(ϵL−ϵkc+ϵkv−ℏω−qμ)(ϵL−ϵk+qc+ϵkv−ℏω−qμ)(ϵL−ϵkc+ϵkv)(4)K_{ee}(\mathbf{k},\mathbf{q},\mu)=\frac{\langle k,v|D_{\mathrm{out}}|k,c\rangle\langle k,c|H_D|k+q,c\rangle\langle k+q,c|\Delta H_{q\mu}|k,c\rangle\langle k,c|D_{\mathrm{in}}|k,v\rangle}{(\epsilon_L-\epsilon_k^c+\epsilon_k^v-\hbar\omega_{-q}^{\mu})(\epsilon_L-\epsilon_{k+q}^c+\epsilon_k^v-\hbar\omega_{-q}^{\mu})(\epsilon_L-\epsilon_k^c+\epsilon_k^v)} \tag*{(4)}
Keh(k,q,μ)=⟨k,v∣HD∣k+q,v⟩⟨k+q,v∣Dout∣k+q,c⟩⟨k+q,c∣ΔHqμ∣k,c⟩⟨k,c∣Din∣k,v⟩(ϵL−ϵk+qc+ϵk+qv−ℏω−qμ)(ϵL−ϵk+qc+ϵkv−ℏω−qμ)(ϵL−ϵkc+ϵkv)(5)K_{eh}(\mathbf{k},\mathbf{q},\mu)=\frac{\langle k,v|H_D|k+q,v\rangle\langle k+q,v|D_{\mathrm{out}}|k+q,c\rangle\langle k+q,c|\Delta H_{q\mu}|k,c\rangle\langle k,c|D_{\mathrm{in}}|k,v\rangle}{(\epsilon_L-\epsilon_{k+q}^c+\epsilon_{k+q}^v-\hbar\omega_{-q}^{\mu})(\epsilon_L-\epsilon_{k+q}^c+\epsilon_k^v-\hbar\omega_{-q}^{\mu})(\epsilon_L-\epsilon_k^c+\epsilon_k^v)} \tag*{(5)}
Khe(k,q,μ)=⟨k,v∣ΔHqμ∣k−q,v⟩⟨k−q,v∣Dout∣k−q,c⟩⟨k−q,c∣HD∣k,c⟩⟨k,c∣Din∣k,v⟩(ϵL−ϵk−qc+ϵk−qv−ℏω−qμ)(ϵL−ϵkc+ϵk−qv−ℏω−qμ)(ϵL−ϵkc+ϵkv)(6)K_{he}(\mathbf{k},\mathbf{q},\mu)=\frac{\langle k,v|\Delta H_{q\mu}|k-q,v\rangle\langle k-q,v|D_{\mathrm{out}}|k-q,c\rangle\langle k-q,c|H_D|k,c\rangle\langle k,c|D_{\mathrm{in}}|k,v\rangle}{(\epsilon_L-\epsilon_{k-q}^c+\epsilon_{k-q}^v-\hbar\omega_{-q}^{\mu})(\epsilon_L-\epsilon_k^c+\epsilon_{k-q}^v-\hbar\omega_{-q}^{\mu})(\epsilon_L-\epsilon_k^c+\epsilon_k^v)} \tag*{(6)}
Khh(k,q,μ)=⟨k,c∣Din∣k,v⟩⟨k,v∣ΔHqμ∣k−q,v⟩⟨k−q,v∣HD∣k,v⟩⟨k,v∣Dout∣k,c⟩(ϵL−ϵkc+ϵkv−ℏω−qμ)(ϵL−ϵkc+ϵk−qv−ℏω−qμ)(ϵL−ϵkc+ϵkv)(7)K_{hh}(\mathbf{k},\mathbf{q},\mu)=\frac{\langle k,c|D_{\mathrm{in}}|k,v\rangle\langle k,v|\Delta H_{q\mu}|k-q,v\rangle\langle k-q,v|H_D|k,v\rangle\langle k,v|D_{\mathrm{out}}|k,c\rangle}{(\epsilon_L-\epsilon_k^c+\epsilon_k^v-\hbar\omega_{-q}^{\mu})(\epsilon_L-\epsilon_k^c+\epsilon_{k-q}^v-\hbar\omega_{-q}^{\mu})(\epsilon_L-\epsilon_k^c+\epsilon_k^v)} \tag*{(7)}

The sum on α\alpha is done over all possible scattering processes. All the considered KK are listed in equations (1) to (4) and each of them represents a different scattering process. In all cases, the represented scattering process starts with the production of an electron-hole pair by the incoming photon. Before the electron and the hole are recombined, they can both scatter on a phonon and/or on a defect as long as the scattering process gets them on the same kk-point in the end. Equation (1) represents a process where both the electron scatters on a phonon and a defect (eeee), equation (2) represents a diffusion of the electron by a phonon and the hole by a defect (eheh), equation (3) represents the scattering of the hole by a phonon and the electron by a defect (hehe) and, finally, equation (4) represents a process where the hole is scattered by both a phonon and a defect (hhhh). It is noteworthy that, due to electron-phonon coupling and defect scattering, the electronic eigenstates yield a finite lifetime which would appear as an imaginary addition to all the terms in the denominator of equations (1) to (4). But, for simplicity, they have been left out as they should only broaden the simulated peaks.

A double-resonance is defined as a particular event for which the corresponding KαK_{\alpha} factor diverges because two of its three terms in the denominator being close to 0. In other words, when the difference between the total system energy (the sum of each quasiparticle’s energies) and the laser energy is zero. Because of numerical discretization (see below) and to make sure not to miss any resonances, we define that a transition is resonant if this difference is below a certain threshold aa. For all our calculations, we have set a=0.005a = 0.005 eV, which is large enough to not miss any double-resonance events and low enough to prevent an excessive broadening of the resonance line. The same threshold is used for scattering over a phonon or a defect. Moreover, one could find this threshold of 0.005 eV is physically meaningful as it acts like a lifetime factor of ∼100\sim100 fs, which is the same order of magnitude of measured relaxation times in monolayered black phosphorus [3, 4] for visible light excitations.

The calculated Raman spectrum is a histogram of all the phonon energies involved in a double-resonant process described above. We approximated all matrix elements in the numerators of the KαK_{\alpha} terms to be 1 or 0 depending of whether the process was allowed due to symmetry considerations of the wavefunction. Thus, the allowed KeeK_{ee} terms can be written as following:

Keepd(k,q,ν)={1if ∣ϵL−ϵk+qc+ϵkv−ℏωqν∣≤a or if ∣ϵL−ϵkc+ϵkv−ℏωqν∣≤a,0otherwise or if ∣ϵL−ϵkc+ϵkv∣>a(8)K_{ee}^{\mathrm{pd}}(\mathbf{k},\mathbf{q},\nu) = \begin{cases} 1 & \text{if } \left|\epsilon_L-\epsilon^c_{\mathbf{k}+\mathbf{q}}+\epsilon^v_{\mathbf{k}}-\hbar\omega^\nu_{\mathbf{q}}\right|\leq a \text{ or if } \left|\epsilon_L-\epsilon^c_{\mathbf{k}}+\epsilon^v_{\mathbf{k}}-\hbar\omega^\nu_{\mathbf{q}}\right|\leq a,\\ 0 & \text{otherwise or if } \left|\epsilon_L-\epsilon^c_{\mathbf{k}}+\epsilon^v_{\mathbf{k}}\right|>a \end{cases} \tag*{(8)}

Similar rules apply to the other KαK_{\alpha} terms for all considered events. The resulting energy histogram is then convolved using a Gaussian kernel with a 1.8 cm−1^{-1} FWHM to smooth the histogram and replicate the experimental resolution.

As mentioned in the section Method, main text, calculations were done on discrete dense kk-point and qq-point grids. This discretization imposed the introduced threshold factor aa to accommodate the numerical broadening between adjacent points in the grids. In all considered double-resonance processes, the electron-hole pair always scatters first on a phonon before scattering on a defect. If we had considered that the pair could scatter first on a defect (momentum transfer only), it was subject to an almost null scattering in kk-space since the particle could just scatter on a neighbor state with an energy difference of less than aa from the initial state. Thus, this would increase the signal from near Γ\Gamma phonons by an arbitrarily factor for no apparent physical reasons. It was then decided not to consider those processes.

Finally, as discussed in the main text, we only considered phonon transitions using Ag1A_g^1 and Ag2A_g^2 branches. The Ag2A_g^2 phonon dispersion had to be corrected manually to preserve the band character throughout the whole Brillouin zone because the calculated eigenvalues are given by the software in ascending order, preventing any crossing between branches. Also, electronic transitions to the second conduction valley in the armchair direction are forbidden due to the symmetries of the wavefunction (see main text). To prevent such transitions to occur, we applied a mask such that electrons do not scatter far from the first resonances.

Double-phonon simulations

A model based on the scattering of two phonons of opposite momenta, qq, was investigated for the monolayer using equation (1), main text, with the same assumptions than for the phonon-defect mode. As possible candidates, we retain every combinations that can be considered as plausible prospects due to the total energy of the sum compared to the Ag1A^{1}_{g} and Ag2A^{2}_{g} energies at some point in the Brillouin zone.

In addition, we consider for the double resonance only two-phonons having specific momenta that could contribute to the Raman process. The momenta that are not accessible, which are delimited in the Figure 5c,Figure 5d for the n=1n = 1 layer 2D-phosphane are avoided. Based on the polarization experiments, the final transition should have the AgA_{g} symmetry. With this in hand, only four possibilities remain in the 363 cm−1363\ \mathrm{cm}^{-1} region (LA+LA, LA+B2uB_{2u}, B2uB_{2u}+B2uB_{2u} and B1gB_{1g}+B1gB_{1g}) and two in the 468 cm−1468\ \mathrm{cm}^{-1} region (B3gB_{3g}+B3gB_{3g} and Ag1A^{1}_{g}+LA).

The simulation over these six candidates of two-phonon modes for n=1n = 1 layer 2D-phosphane is presented in Figure S7 for different excitation wavelengths. In general, the FWHMs are too high and the simulated frequencies are completely off. In addition, the simulation predicts a large shift of the peaks between λex=532 nm\lambda_{ex} = 532\ \mathrm{nm} and 633 nm633\ \mathrm{nm}, which is not observed in our experiments. The two-phonon mode simulated cannot, however, produce sharp modes with Raman shift comparable to Ag1A^{1}_{g} or Ag2A^{2}_{g} modes, nor that they can they the trend seen with excitation energy.

Simulation of different combinations of double-phonon resonances

Figure S7. Simulation of different combinations of double-phonon resonances at four excitation energies (1.9, 2.1 2.3 and 2.5 eV) for n=1n = 1 layer 2D-Phosphane. a – d, The combination of double-phonon candidates expected to appear around 363 cm−1363\ \mathrm{cm}^{-1}: LA+LA, LA+B2uB_{2u}, B2uB_{2u}+B2uB_{2u} and B1gB_{1g}+B1gB_{1g}. e – f, The two combinations of double-phonon candidates expected to appear around 468 cm−1468\ \mathrm{cm}^{-1}: B3gB_{3g}+B3gB_{3g} and Ag1A^{1}_{g}+LA. The dash line marks the position of the Ag1A^{1}_{g} and Ag2A^{2}_{g} modes.

Defect:phonon ratio

There is no calibration in our experiments of the density of defects with exposure time, but this number can be inferred in the limits of the experiments performed on the sample degradation. We first considered similar experiments on graphene that have shown that the Raman signatures (e.g. the G band) is weakly affected with defects, even when the concentration reaches 1:2 (defect:C atoms) [5]. Although black phosphorus is more reactive [6], it is expected that its Raman characteristics with disorder exhibit a similar behavior than graphene: i.e. we expect a gradual increase of the FWHM of the Raman modes with defect density. As for the G band of graphene, the FWHM of the bulk modes should roughly remain constant up to a disorder level of ∼1%\sim1\%. Interestingly, the FWHMs of the Ag1A_{g}^{1} and Ag2A_{g}^{2} modes remain constant in Figure 4e. Hence, we estimate that an exposition of 135 minutes for the n=3n = 3 layer 2D-phosphane, which is the upper limit of degradation considered here, induces a defect density that is most likely lower than 1%. Assuming a defect density proportional to exposition time, the density of defects should therefore be limited to ∼6⋅1010 cm−2\sim6 \cdot10^{10}\ \mathrm{cm}^{-2} per minute.

In the pristine state, few-layer 2D-phosphane cannot have a lower defect density than the nominal purity of the exfoliated black phosphorus, which is for some samples ∼0.005%\sim0.005\%, giving a surface density of ∼3.5⋅1010 cm−2\sim3.5 \cdot10^{10}\ \mathrm{cm}^{-2}. While we did not know the initial degradation state of the n=3n=3 layer 2D-phosphane, it is clear therefore that it is most likely higher than 3.5⋅1010 cm−23.5 \cdot10^{10}\ \mathrm{cm}^{-2} in the initial state right after the exfoliation of the sample. Moreover, we estimate a degradation rate of 5⋅1010 cm−2min−15 \cdot10^{10}\ \mathrm{cm}^{-2}\mathrm{min}^{-1} for the n=3n = 3 layer 2D-phosphane, which gives an initial density of defects of 5⋅1010 cm−25 \cdot10^{10}\ \mathrm{cm}^{-2}. The simulation in Figure S8 presents the dependence of (D1+D1′)/Ag1(D_{1}+D_{1}^{\prime})/A_{g}^{1} ratio for three different wavelengths with the mean distance between defect (LDL_{D}) based on the estimation of the density.

References

  1. [1]Anne-Laurence Phaneuf-L’Heureux et al. “Polarization-Resolved Raman Study of Bulk-like and Davydov-Induced Vibrational Modes of Exfoliated Black Phosphorus”. In: Nano Letters 16.12 (Dec. 2016), pp. 7761–7767. ISSN: 1530-6984. DOI: 10.1021/acs.nano lett.6b03907. URL: https://doi.org/10.1021/acs.nano lett.6b03907 (visited on 07/05/2018).
  2. [2]Yanqing Feng et al. “Raman spectra of few-layer phosphorene studied from first-principles calculations”. In: Journal of Physics: Condensed Matter 27.18 (2015), p. 185302. URL: http://stacks.iop.org/0953-8984/27/i=18/a=185302.DOI
  3. [3]Y. Wang et al. “Ultrafast recovery time and broadband saturable absorption properties of black phosphorus suspension”. In: Appl. Phys. Lett. 107 (2015), 091905:1–5. URL: https://aip.scitation.org/doi/abs/10.1063/1.4930077.DOI
  4. [4]K. Wang et al. “Ultrafast Nonlinear Excitation Dynamics of Black Phosphorus Nanosheets from Visible to Mid-Infrared”. In: ACS Nano 10 (2016), pp. 6923–6932. URL: https://pubs.acs.org/doi/abs/10.1021/acsnano.6b02770.DOI
  5. [5]M. M. Lucchese et al. “Quantifying ion-induced defects and Raman relaxation length in graphene”. In: Carbon 48.5 (2010), pp. 1592–1597. URL: https://www.sciencedirect.com/science/article/pii/S0008622310000138.DOI
  6. [6]S. L. Yau et al. “Stm of the (010) Surface of Orthorhombic Phosphorus”. In: Chem. Phys. Lett. 198.3-4 (1992), pp. 383–388. URL: http://bard.cm.utexas.edu/resources/Bard-Reprint/537.pdf.DOI

Paper details

vlnc:W_mhk3k9gm
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents