betaFeedback

WorksPhysics and Astronomy

Unitary Design of Quantum Spin Networks for Robust Routing, Entanglement Generation, and Phase Sensing

Abstract

Spin chains can be used to describe a wide range of platforms for quantum computation and quantum information. They enable the understanding, demonstration, and modeling of numerous useful phenomena, such as high fidelity transfer of quantum states, creation and distribution of entanglement, and creation of resources for measurement-based quantum processing. In this paper, a more complex spin system, a 2D spin network (SN) engineered by applying suitable unitaries to two uncoupled spin chains, is studied. Considering only the single-excitation subspace of the SN, it is demonstrated that the system can be operated as a router, directing information through the SN. It is also shown that it can serve to generate maximally entangled states between two sites. Furthermore, it is illustrated that this SN system can be used as a sensor device able to determine an unknown phase applied to a system spin. A detailed modeling investigation of the effects of static disorder in the system shows that this system is robust against different types of disorder.

Introduction

Spin chains provide a generic model for the behaviour of a range of useful tasks in quantum information processing [1]. They can be used to transfer information through the chain [1, 2, 3] or to create and distribute entanglement [4, 5, 6, 7, 8, 9]. Unlike gate-based schemes, spin chains do not necessarily require the switching on and off of couplings between qubits. A desirable process may be achieved through exploiting the natural dynamics of the system with a fixed Hamiltonian [10, 11]. Furthermore, spin chain systems can describe and be used to model a wide variety of different physical implementations. Examples include quantum dots [3, 12, 13], trapped ions [14], superconducting qubits [15, 16] and coupled optical waveguides [17].

Spin Networks (SN), on the other hand, can have a topology more complex than linear spin chains [18, 19] and have applications which include quantum sensing [20, 21, 22, 23]. Simple examples of SN systems can be generated by connecting spin chains. If this is effected via suitably chosen unitary transformations, clearly the spectrum is preserved and so the physical behaviour of the SN can be engineered by design. The SN that we investigate here is designed via the application of a Hadamard-like unitary on two uncoupled spin chains.

In this paper, we show that the SN system we explore can be used as a router that sends quantum information through the network according to an external control. In a perfect SN, the information can be directed through the network to a chosen site with unit fidelity, also known as perfect state transfer (PST). We also demonstrate that the SN system can be used to create a maximally entangled state between two sites. Furthermore, we will introduce a protocol for using our SN as a sensor device that retrieves any unknown phase applied to a particular spin in the system. Finally, in order for our results to be applied to realistic situations, we will investigate in detail the effect of different types of static disorder in the system.

The Model

A linear spin chain system with nearest-neighbor interaction can be described by the time-independent XY-Hamiltonian as follows:

HXY=12∑i=1N−1Ji,i+1(σixσi+1x+σiyσi+1y)+∑i=1Nϵi2(σiz)(1)\mathcal{H}_{XY} = \frac{1}{2}\sum_{i=1}^{N-1} J_{i,i+1}(\sigma_i^x\sigma_{i+1}^x+\sigma_i^y\sigma_{i+1}^y)+\sum_{i=1}^{N}\frac{\epsilon_i}{2}(\sigma_i^z) \tag*{(1)}

where NN is the total number of sites, Ji,i+1J_{i,i+1} is the nearest-neighbor interaction between sites ii and i+1i+1, and σix\sigma_i^x, σiy\sigma_i^y, σiz\sigma_i^z are Pauli operators that represent the spin components for site ii. In the second term, in Eq. (1), each ϵi\epsilon_i represents the on-site energy for an excitation at site ii. We will generally consider situations where the on-site energy is independent of the site ii and so we can set ϵi=0\epsilon_i=0. However, when we investigate the effect of diagonal disorder in the system, ϵi\epsilon_i must be considered.

In a spin chain prepared to have spin down ∣0⟩\lvert0\rangle at all sites, a single-excitation at a site ii is defined as a spin up ∣ri⟩=∣00…1i00…⟩\lvert r_i\rangle=\lvert00\ldots1_i 00\ldots\rangle. The number of excitations N=∑i=1N12(σiz+I)N=\sum_{i=1}^{N}\frac{1}{2}(\sigma_i^z+I), where II is the relevant identity, is conserved. As NN commutes with HXY\mathcal{H}_{XY}, even in the presence of disorder, the different excitation-number subspaces decouple. In our calculations, we will only consider the single-excitation subspace, as this suffices to achieve the desired phenomena.

We initially consider trimer chains where the coupling parameters are constant, so Ji,i+1=JJ_{i,i+1}=J. The advantage of such trimer chains is that information can be transferred through the system with PST. Extension to longer spin chains can be achieved by using different PST schemes (e.g. tuning the boundary couplings, J1,2J_{1,2} and JN−1,NJ_{N-1,N} [24, 25, 26, 27] or controlling each coupling parameter, Ji,i+1J_{i,i+1} [3, 28, 29, 30, 31, 32]).

To test how well a quantum process is performed, we use fidelity, which calculates the overlap of an evolved initial state ∣ψ(0)⟩\lvert\psi(0)\rangle with a desirable state ∣ψdes⟩\lvert\psi_{des}\rangle at a later time tt

F(t)=∣⟨ψdes∣e−iHt∣ψ(0)⟩∣2,(2)F(t)=\left|\langle\psi_{des}|e^{-i\mathcal{H}t}|\psi(0)\rangle\right|^2, \tag*{(2)}

for the relevant static system Hamiltonian H\mathcal{H} and with the reduced Plank constant set to be ℏ=1\hbar=1. For the trimer chain, an example of PST is achieved when the fidelity of an evolved initial state ∣r1⟩=∣100⟩\lvert r_1\rangle=\lvert100\rangle against the desirable state ∣r3⟩=∣001⟩\lvert r_3\rangle=\lvert001\rangle is equal to 1. This happens at time tm=π/(2J)t_m=\pi/(\sqrt{2}J). Since at this time any initial state evolves to its reflection about the mid point of the chain, this is called the mirroring time tmt_m [32]. In the presence of errors, the mirroring time and the fidelity change, depending on the type of error, as will be discussed below.

In order to quantify how much a quantum state is entangled we use the Entanglement of Formation (EOF), which gives the entanglement of any arbitrary pair of qubits AA and BB independent of whether they are in a pure or mixed state. The EOF is defined as [33]

EOFAB=−xlog⁡2x−(1−x)log⁡2(1−x)(3)\mathrm{EOF}_{AB}=-x\log_2x-(1-x)\log_2(1-x) \tag*{(3)}

where x=1+1−τ2x=\frac{1+\sqrt{1-\tau}}{2}, τ=[max⁡(λ1−λ2−λ3−λ4,0)]2\tau=[\max(\lambda_1-\lambda_2-\lambda_3-\lambda_4,0)]^2, λi=ϵi\lambda_i=\sqrt{\epsilon_i}, and ϵi\epsilon_i are the eigenvalues of the matrix ρABρ‾AB\rho_{AB}\overline{\rho}_{AB}. Here ρAB\rho_{AB} is the reduced density matrix of sites AA and BB, and ρ‾AB\overline{\rho}_{AB} is the spin-flipped ρAB\rho_{AB}, so ρ‾AB=(σyA⊗σyB)ρAB∗(σyA⊗σyB)\overline{\rho}_{AB}=(\sigma_y^A\otimes\sigma_y^B)\rho_{AB}^*(\sigma_y^A\otimes\sigma_y^B).

Off-Diagonal Disorder

Off-diagonal disorder (also called coupling disorder) affects the system coupling parameters. We investigate the effect of the coupling errors on the system by adding these to the coupling parameters of the Hamiltonian Hxy\mathcal{H}_{xy} in Eq. (1)

Ji,i+1perturbed=Ji,i+1+Ji,i+1′(4)J^{\mathrm{perturbed}}_{i,i+1}=J_{i,i+1}+J'_{i,i+1} \tag*{(4)}

where Ji,i+1′=Edi,i+1J'_{i,i+1}=Ed_{i,i+1}; the parameter EE, reported in the figures in units of max⁡{Ji,i+1}\max\{J_{i,i+1}\}, sets the scale of the error; and di,i+1d_{i,i+1} is a random number that depends on a particular distribution. Two physically reasonable distributions (uniform and Gaussian distribution) will be considered, each with zero mean value.

The normalised uniform (or flat) distribution of random numbers is chosen to be of unit weight within the window [−0.5,0.5][-0.5, 0.5]. For zero mean, the normalised Gaussian distribution with a standard deviation of ww takes

the form f(d)=1w2πexp⁡(−d2/2w2)f(d)=\frac{1}{w\sqrt{2\pi}}\exp(-d^2/2w^2). As the standard deviation of our chosen flat distribution is w=123w=\frac{1}{2\sqrt{3}}, we use this value of ww in the Gaussian distribution to model Gaussian errors equivalent to the flat case. As will be seen, our disorder modelling is then essentially independent of the form of the random distribution used (flat or Gaussian), until the regime of very large disorder is reached. For error regimes of interest for useful devices, no dependence on the form of the error distribution used will be apparent.

Diagonal Disorder

The second type of disorder considered here is the diagonal disorder (i.e., on-site energy disorder). Therefore, the second term in Eq. (1) is now present. The site-dependent errors are represented as ϵi=Edi\epsilon_i=Ed_i, where EE and the random did_i have the same definitions as before.

Spin Network

Unitary transformations can play a very useful role in designing and engineering new physical SN systems. Such transformations can be used to simplify complex networks, while retaining the spectrum and desirable features of the system dynamics [9]. Correspondingly, here we use such transformations to couple together smaller SNs into larger systems, again retaining or engineering in desirable features. We stress that this unitary transformation approach is a mathematical design stage, so the resultant SN is then the network that should be constructed physically, in order to deliver the desirable dynamics or properties.

In this work, our proposed SN is a 2D system of spins that is realized by connecting two identical spin chains. In fact, in general, multiple spin chains can be connected to form a larger spin network system. However, the applications we study here only require a small SN, realized by connecting just two identical spin chains.

Design and Realisation of Our SN

First, we consider two identical uncoupled trimers as illustrated in Figure 1. Each trimer acts as a separate spin chain and exhibits PST for a single excitation transferring between site 1 and site 3; similarly, for the second chain, PST is achieved between sites 4 and 6.

Two uncoupled trimers

Figure 1. Two uncoupled trimers.

The Hamiltonian for these two uncoupled chains is given as

H=(0J0000J0J0000J00000000J0000J0J0000J0)(5)\mathcal{H} = \begin{pmatrix} 0 & J & 0 & 0 & 0 & 0 \\ J & 0 & J & 0 & 0 & 0 \\ 0 & J & 0 & 0 & 0 & 0 \\ 0 & 0 & 0 & 0 & J & 0 \\ 0 & 0 & 0 & J & 0 & J \\ 0 & 0 & 0 & 0 & J & 0 \end{pmatrix} \tag*{(5)}

The two uncoupled spin chains can be connected in order to form a SN by applying an appropriate unitary transformation UU to the Hamiltonian H\mathcal{H}. For the example presented here, we apply a unitary that is a Hadamard transformation between site 3 and site 6:

U=(10000001000000120012000100000010001200−12)(6)U = \begin{pmatrix} 1 & 0 & 0 & 0 & 0 & 0 \\ 0 & 1 & 0 & 0 & 0 & 0 \\ 0 & 0 & \frac{1}{\sqrt{2}} & 0 & 0 & \frac{1}{\sqrt{2}} \\ 0 & 0 & 0 & 1 & 0 & 0 \\ 0 & 0 & 0 & 0 & 1 & 0 \\ 0 & 0 & \frac{1}{\sqrt{2}} & 0 & 0 & -\frac{1}{\sqrt{2}} \end{pmatrix} \tag*{(6)}

Here, U−1=UU^{-1}=U, and therefore the transformed Hamiltonian is given as

H=UHU−1=(0J0000J0J200J20J200J200000J000J2J0−J20J200−J20)(7)\mathcal{H}=U\mathcal{H}U^{-1} = \begin{pmatrix} 0 & J & 0 & 0 & 0 & 0 \\ J & 0 & \frac{J}{\sqrt{2}} & 0 & 0 & \frac{J}{\sqrt{2}} \\ 0 & \frac{J}{\sqrt{2}} & 0 & 0 & \frac{J}{\sqrt{2}} & 0 \\ 0 & 0 & 0 & 0 & J & 0 \\ 0 & 0 & \frac{J}{\sqrt{2}} & J & 0 & -\frac{J}{\sqrt{2}} \\ 0 & \frac{J}{\sqrt{2}} & 0 & 0 & -\frac{J}{\sqrt{2}} & 0 \end{pmatrix} \tag*{(7)}

Using this transformation, we have designed a SN system of six sites (Figure 2). We stress that it is this coupled SN that should be constructed physically, in order to deliver the various applications. We choose to design the SN via a unitary transformation because we know that the spectrum is unchanged. Therefore UU is chosen to produce interesting and useful transformed dynamics. In order to demonstrate this, we require the eigenvectors and eigenvalues (see appendix A) of the Hamiltonian H\mathcal{H}. The system is first prepared to be in the state ∣000…⟩\lvert000\ldots\rangle where all sites have spin-down. Then, the dynamics of the system is initialised by the simple injection of a single-excitation at site 1 at t=0t=0:

Scheme of the 6 sites SN system

Figure 2. Scheme of our 6 sites SN system. The dashed lines are the new couplings that connect the two uncoupled chains as a result of the unitary transformation of the Hamiltonian. Note that on top of these two additional couplings the energy associated to some of the already existing ones has changed.

∣ψ1(0)⟩=∣r1⟩,(8)\lvert\psi_1(0)\rangle=\lvert r_1\rangle, \tag*{(8)}

where ∣r1⟩=∣100000⟩\lvert r_1\rangle=\lvert100000\rangle.

This state is clearly not an eigenstate, so it will evolve in a non-trivial way. The state evolution is then found numerically[34] or analytically by decomposing the initial state Eq. (8) into the eigenvectors of the Hamiltonian H\mathcal{H}. The excitation will then evolve, through the natural dynamics of the system, to a state that is a superposition between site 3 and site 6 at the mirroring time tmt_m

∣ψ1(tm)⟩=−12(∣r3⟩+∣r6⟩).(9)\lvert\psi_1(t_m)\rangle=-\frac{1}{\sqrt{2}}\left(\lvert r_3\rangle+\lvert r_6\rangle\right). \tag*{(9)}

Then it evolves back to site 1 at 2tm2t_m and so ∣ψ1(0)⟩=∣ψ1(2tm)⟩\lvert\psi_1(0)\rangle=\lvert\psi_1(2t_m)\rangle.

Similarly, if at t=0t=0 we inject the single-excitation at site 4 instead of site 1, then the excitation will evolve at tmt_m to a superposition state between site 3 and site 6 but with a relative phase of −1-1

∣ψ4(tm)⟩=−12(∣r3⟩−∣r6⟩).(10)\lvert\psi_4(t_m)\rangle=-\frac{1}{\sqrt{2}}\left(\lvert r_3\rangle-\lvert r_6\rangle\right). \tag*{(10)}

Then, it evolves back to site 4 at 2tm2t_m.

This dynamics is engineered by constructing a Hadamard-based unitary to connect the chains; unitary based on different gates could be used for engineering alternative behaviours/state superpositions.

For demonstration, in what follows, we will use just the case where the single-excitation is injected at site 1.

Router

Routing is clearly an important function to have in quantum networks. Spin chains have been proposed as routers via time-dependent driving of the chain couplings [35, 36] or modulating the on-site energies [37]. In our scheme, the Hamiltonian parameters will instead remain unchanged.

We now explain how our SN can be used as a router, so to control whether the excitation is allowed to return to site 1 or to propagate to site 4. We have seen above that the excitation evolves from site 1 to a superposition of being at site 3 and site 6 and then it evolves back to site 1. For routing, we perform a sudden (on the timescale of the dynamics) operation at the time tmt_m, when the excitation arrives at site 3 and site 6, to force the excitation to evolve to site 4. This is done by applying a local phase flip of (eiπ=−1)(e^{i\pi}=-1) at either site 3 or site 6 at tmt_m. For illustration, we choose to apply the phase flip at site 6, such that under the sudden approximation the state at tmt_m becomes:

∣ψ1(tm)⟩π=−12(∣r3⟩+eiπ∣r6⟩).(11)\lvert\psi_1(t_m)\rangle_{\pi}=-\frac{1}{\sqrt{2}}\left(\lvert r_3\rangle+e^{i\pi}\lvert r_6\rangle\right). \tag*{(11)}

As a result, the evolution of ∣ψ1(tm)⟩π\lvert\psi_1(t_m)\rangle_\pi will transfer the excitation to site 4 at 2tm2t_m. Therefore, the system will be operated as a router such that the excitation will not evolve back to site 1, but it will evolve to site 4 instead.

Clearly, by design as it is based on PST, the router will operate perfectly for a perfect SN. However, in anticipation of considering practical systems with disorder present, we use fidelity to asses how well the excitation is transferred to site 4. In order to do so, we should take into account that the evolution changes when a phase factor is applied to the system. Consequently, there are two fidelities to be calculated, (i.e., the fidelity before and after the phase factor is applied to the system). For instance, if the system is initialized with a single-excitation injected at site 1 at t=0t=0 and we add a phase factor eiθe^{i\theta} at site 6 at tmt_m, the fidelity of the excitation being at the desirable site ∣ψdes⟩\lvert\psi_{\mathrm{des}}\rangle is calculated as follows:

  1. The fidelity for 0≤t<tm0\leq t<t_m is calculated as:

F(t)=∣⟨ψdes∣exp⁡(−iHt)∣ψ1(0)⟩∣2,F(t)=\left\lvert\langle\psi_{\mathrm{des}}\rvert\exp(-iHt)\lvert\psi_1(0)\rangle\right\rvert^2,

with the initial state being ∣ψ1(0)⟩=∣r1⟩\lvert\psi_1(0)\rangle=\lvert r_1\rangle.

  1. The fidelity for t≥tmt\geq t_m is calculated as:

F(t)=∣⟨ψdes∣exp⁡(−iHt)∣ψ1(tm)⟩θ∣2,F(t)=\left\lvert\langle\psi_{\mathrm{des}}\rvert\exp(-iHt)\lvert\psi_1(t_m)\rangle_\theta\right\rvert^2,

with the new initial state being ∣ψ1(tm)⟩θ=−12(∣r3⟩+eiθ∣r6⟩)\lvert\psi_1(t_m)\rangle_\theta=-\frac{1}{\sqrt{2}}\left(\lvert r_3\rangle+e^{i\theta}\lvert r_6\rangle\right).

The desirable state for the routing device is an excitation being at site 4, ∣ψdes⟩=∣r4⟩\lvert\psi_{\mathrm{des}}\rangle=\lvert r_4\rangle. In Figure 3, the fidelity of an excitation being at each site is plotted as a function of time, which shows that the excitation is transferred from site 1 to site 4 with PST. The excitation will then keep oscillating between site 4 and a superposition state of site 3 and site 6. If the phase flip is applied repeatedly at site 6, each time the excitation is in a superposition of site 3 and site 6 (i.e., tmt_m, 3tm3t_m, 5tm5t_m, …\ldots), then the excitation will keep oscillating between site 1 and site 4. The protocol for operating the SN as a router is shown in Figure 4.

The fidelity of an excitation being at each of the six sites as a function of time

Figure 3. The fidelity of an excitation being at each of the six sites as a function of time. PST is achieved from site 1 to site 4 when a phase flip is applied at site 6 at tmt_m. The colored bar shows the fidelity values ranging from 0 to 1.

The routing protocol is achieved by injecting a single-excitation at site 1 at $t=0$ and injecting a phase flip at site 6 at $t_m$.

Figure 4. The routing protocol is achieved by injecting a single-excitation at site 1 at t=0t=0 and injecting a phase flip at site 6 at tmt_m.

Router Robustness

In order to test the robustness of our routing protocol we apply two types of disorder, diagonal and off-diagonal disorder. We then measure the fidelity against ∣r4⟩\lvert r_4\rangle at different times 2tm2t_m, 4tm4t_m, and 6tm6t_m. These are the times where the excitation is found to be at site 4 for the ideal case with no errors. For both types of disorder we have considered a Gaussian and a flat distribution for the random error did_i, with error scale E/JE/J. Since the error is random, we consider a large number of realisations so each point in Figure 5 and Figure 6 is the average value of 1000 realisations of the fidelity in the presence of disorder.

Fidelity peaks $F_{\mathrm{pk}}$ for the routing protocol in the presence of diagonal disorder.

Figure 5. Fidelity peaks FpkF_{\mathrm{pk}} (F(t)F(t) against the state ∣r4⟩\lvert r_4\rangle for t=2tmt=2t_m, 4tm4t_m, and 6tm6t_m) for the routing protocol in the presence of diagonal disorder with different error scales E/JE/J and for random Gaussian and flat distributions (solid orange and dashed blue line, respectively). Each point has been averaged over 1000 realisations of the fidelity.

Fidelity peaks $F_{\mathrm{pk}}$ for the routing protocol in the presence of off-diagonal disorder.

Figure 6. Fidelity peaks FpkF_{\mathrm{pk}} (F(t)F(t) against the state ∣r4⟩\lvert r_4\rangle for t=2tmt=2t_m, 4tm4t_m, and 6tm6t_m) for the routing protocol in the presence of off-diagonal disorder with different error scales E/JE/J and for random Gaussian and flat distributions (solid orange and dashed blue line, respectively). Each point has been averaged over 1000 realisations of the fidelity.

A very robust behaviour of the fidelity against diagonal disorder can be seen in Figure 5 where the fidelity remains above 99% at 2tm2t_m and >95%>95\% at a later time, 6tm6t_m, even with large error scale, E/J=15%E/J=15\%. With significant error scale, E/J=25%E/J=25\%, the fidelity at 2tm2t_m, 4tm4t_m, and 6tm6t_m remains above 98%, 94%, and 88%, respectively. On other hand, the fidelity is not so robust against off-diagonal disorder, as shown in Figure 6, rapidly decreasing as E/J≥20%E/J \ge20\%. The plots also show that both random number distributions (Gaussian and flat distributions) give results which are indistinguishable on the scale of the plots for error scale up to E/J=20%E/J=20\%, while for E/J>20%E/J>20\% the Gaussian distribution has slightly less impact on the fidelity compared to the flat distribution. The routing protocol is very robust for both types of disorder when the error scale is up to E/J≤10%E/J \le10\%. Both

figures illustrate that when E/J≤10%E/J \le10\%, the routing fidelity remains above 97% at three consecutive times (2tm2t_m, 4tm4t_m, and 6tm6t_m) with diagonal disorder, while it remains above 90% at the same three consecutive times with off-diagonal disorder. It is important to note that in real implementations the error scale could reasonably be expected to be E/J<10%E/J<10\%, and since the robustness of our routing protocol remains high for such error scales, we highlight the potential of our SN for short-distance routing applications.

Entanglement Generation

The SN system initialized as ∣r1⟩\lvert r_1\rangle naturally generates the maximally entangled state Eq. (9) between sites 3 and 6 at times ntmnt_m with nn odd. However, it can also be used to create a maximally entangled state between sites 1 and 4. This is done as follows: We inject a single excitation at site 1 at t=0t=0 and we then apply a phase shift of eiπ/2e^{i\pi/2} at site 6 at tmt_m. As a result, the state will evolve at 2tm2t_m to be

∣ψ1(2tm)⟩=1+eiπ/22∣r1⟩+1−eiπ/22∣r4⟩.(12)\lvert\psi_1(2t_m)\rangle= \frac{1+e^{i\pi/2}}{2}\lvert r_1\rangle+\frac{1-e^{i\pi/2}}{2}\lvert r_4\rangle. \tag*{(12)}

The state of the system then keeps oscillating between a superposition state of site 1 and site 4 and a superposition state of site 3 and site 6, such that the state at 3tm3t_m will be

∣ψ1(3tm)⟩∣π/2=−12(∣r3⟩+eiπ/2∣r6⟩)(13)\left.\lvert\psi_1(3t_m)\rangle\right|_{\pi/2}=-\frac{1}{\sqrt{2}}\left(\lvert r_3\rangle+e^{i\pi/2}\lvert r_6\rangle\right) \tag*{(13)}

and the state at 4tm4t_m will return to be

∣ψ1(4tm)⟩=∣ψ1(2tm)⟩(14)\lvert\psi_1(4t_m)\rangle=\lvert\psi_1(2t_m)\rangle \tag*{(14)}

The state ∣ψ1(2tm)⟩|\psi_1(2t_m)\rangle is a maximally entangled state between site 1 and site 4. We note that as the SN could be engineered from longer spin chains, this is an effective way to entangle distant qubits and can be used as a resource for quantum information processing purposes.

Entanglement Robustness

We now wish to investigate the robustness of our protocol to generate an entangled state against error. This is done by calculating the effect of errors on the EOF of the relevant maximally entangled state between site 1 and site 4 at different times 2tm2t_m, 4tm4t_m, and 6tm6t_m. These are the times where the state of the system, for no error, is found to be maximally entangled. Two types of error have been considered, the presence of on-site energy error Figure 7 and coupling imperfections Figure 8. Since the errors are random, we consider a large number of realisations and each point in Fig.(7) and Fig.(8) has been averaged over 1000 realisations of EOF in the presence of errors.

EOF between sites 1 and 4 at 2tm, 4tm, and 6tm in the presence of diagonal disorder

Figure 7. EOF between sites 1 and 4 at 2tm2t_m, 4tm4t_m, and 6tm6t_m in the presence of diagonal disorder with different error scales E/JE/J and for random Gaussian and flat distributions (solid orange and dashed blue line, respectively). Each point has been averaged over 1000 realisations of the EOF.

EOF between sites 1 and 4 at 2tm, 4tm, and 6tm in the presence of off-diagonal disorder

Figure 8. EOF between sites 1 and 4 at 2tm2t_m, 4tm4t_m, and 6tm6t_m in the presence of off-diagonal disorder with different error scales E/JE/J and for random Gaussian and flat distributions (solid orange and dashed blue line, respectively). Each point has been averaged over 1000 realisations of the EOF.

We observe that the generation of the entangled state seems to be very robust against diagonal disorder Figure 7, with an EOF that remains above 99% at 2tm2t_m for error scale up to E/J=15%E/J = 15\% and above 95% for a significant error scale of E/J=25%E/J = 25\%. Furthermore, the EOF at times up to 6tm6t_m remains above 90% with a large error scale of E/J=10%E/J = 10\%. In the off-diagonal disorder case, Figure 8, the EOF remains above 97% and 95% when the error scale is E/J=10%E/J = 10\% at 2tm2t_m and 4tm4t_m, respectively. However, it decreases fast as E/J≥20%E/J \ge20\%, particularly at later times (4tm4t_m and 6tm6t_m).

It is clear for the diagonal disorder case that the effects of the random Gaussian and flat distributions are identical at 2tm2t_m up to E/J=40%E/J = 40\% and very similar at

later times. In the case of off-diagonal disorder, results from both random number distributions remain identical at 2tm2t_m and 4tm4t_m up to E/J=30%E/J = 30\% and extremely close at 6tm6t_m up to E/J=30%E/J = 30\%. Therefore, the EOF behaviour is independent of the form of the random distribution used (Gaussian or flat), until the regime of significant error strength of E/J≥30%E/J \ge30\% is reached. The robustness of our protocol for a significant error scale makes it a promising candidate to generate entangled states in real applications.

Phase Sensor Device

Quantum sensors now form a recognised sector within the whole quantum technologies landscape [20, 21, 22, 38, 39, 40, 41, 42]. Use of quantum resources for sensing enables the ultimate (Heisenberg-limited) sensitivity to be pursued. In essentially all such applications, the field or effect being sensed is arranged to impart a phase on the quantum resources (qubits) in some chosen interferometric system. Thus measurement of this phase through interference enables sensing of the field or effect that caused it.

In both implementations mentioned above, a chosen phase is applied at site 6 at tmt_m, to perform a specific operation. We now consider the case where the sudden phase factor eiθe^{i\theta} applied at site 6 is unknown and arises from an external field or effect, which is to be investigated by the phase it generates. The task is to retrieve this unknown phase θ\theta (modulo 2π2\pi), in order to sense the field or effect that produced it. We can derive analytically how an arbitrary phase θ\theta will modify the occupation of sites 1 and 4 at 2tm2t_m, see appendix B. From a practical perspective, we assume that the only information we could determine is the fidelity measurement at either sites 1 or site 4 against ∣r1⟩|r_1\rangle or ∣r4⟩|r_4\rangle respectively, at 2tm2t_m. In what follows, we will assume we can retrieve the fidelity against ∣r1⟩|r_1\rangle.

When an initial excitation is injected at site 1 at t=0t=0 and an unknown phase θ\theta is applied suddenly at site 6 at tmt_m, the state of the system at 2tm2t_m will be given by

∣ψ1(2tm)⟩=1+eiθ2∣r1⟩+1−eiθ2∣r4⟩.(15)|\psi_1(2t_m)\rangle= \frac{1+e^{i\theta}}{2}|r_1\rangle+\frac{1-e^{i\theta}}{2}|r_4\rangle. \tag*{(15)}

Thus, by considering the overlap of the initial state ∣ψ1(0)⟩=∣r1⟩|\psi_1(0)\rangle=|r_1\rangle with the system state at 2tm2t_m, Eq. (15), the fidelity against ∣r1⟩|r_1\rangle at 2tm2t_m can be written as

F1=12(1+cos⁡θ).(16)F_1=\frac{1}{2}(1+\cos\theta). \tag*{(16)}

More details are given in appendix B. Therefore, in the ideal case, the unknown angle can be obtained as θ=cos⁡−1(2F1−1)\theta=\cos^{-1}(2F_1-1). It is important to note that this would enable us to retrieve any unknown angle in the range from 00 to π\pi. However, the unknown angle could be in the range from 00 to 2π2\pi. Thus, we also need a separate fidelity as a function of sin⁡θ\sin\theta, alongside F1F_1, in order to be able to obtain any unknown angle in the range from 00 to 2π2\pi.

In order to obtain a fidelity as a function of sin⁡θ\sin\theta, an additional sudden phase factor of ±i\pm i should be applied to either site 3 or site 6. For example, a known shift of −π2-\frac{\pi}{2} applied to site 6 gives a total sudden phase factor of (exp⁡i(θ−π2))(\exp i(\theta-\frac{\pi}{2})). As a result, the fidelity against ∣r1⟩|r_1\rangle at 2tm2t_m can now be written as

F2=12(1+cos⁡(θ−π2))(17)F_2=\frac{1}{2}(1+\cos(\theta-\frac{\pi}{2})) \tag*{(17)}
=12(1+sin⁡θ).(18)=\frac{1}{2}(1+\sin\theta). \tag*{(18)}

We label the fidelity index here by 2 in order to distinguish between two fidelities. F1F_1 is the fidelity against ∣r1⟩|r_1\rangle at 2tm2t_m when the unknown phase is applied at site 6, whereas F2F_2 is the fidelity against ∣r1⟩|r_1\rangle at 2tm2t_m when the additional shift of −π2-\frac{\pi}{2} is added to the unknown phase, Figure 9.

Demonstration of two separate experiments used to obtain $F_1$ and $F_2$

Figure 9. Demonstration of two separate experiments used to obtain F1F_1 (left) and F2F_2 (right). In both experiments we choose to measure the fidelity against ∣r1⟩\lvert r_1\rangle.

Phase Sensor Protocol and Its Robustness

Here, we discuss details of the retrieval protocol and results in the presence of imperfections. Both fidelities F1F_1 and F2F_2 are needed for this protocol, so the injection of the unknown phase must be repeatable. In practical implementations there will be some disorder, or imperfections, in the system and so we will consider the performance of the phase-sensing protocol in the presence of disorder in the system. Results for the fidelities F1F_1 and F2F_2 in the presence of off-diagonal disorder are presented in Figure 10 and Figure 11. Results are for a set of unknown phases ranging from 00 to 2π2\pi, and are averaged over 1000 realisations. It is apparent that the fidelity is more sensitive to off-diagonal disorder when it is approaching unity, see Figure 10 and Figure 11. The diagonal disorder on the other hand has very weak effect on the fidelity, see appendix C.

Fidelity $F_1$ against $\lvert r_1\rangle$ at $2t_M$ in the presence of off-diagonal disorder

Figure 10. Fidelity F1F_1 against ∣r1⟩\lvert r_1\rangle at 2tM2t_M in the presence of off-diagonal disorder. The orange line corresponds to the ideal case where there is no error. The dots are the averaged fidelity of 1000 fidelity realisations for each unknown phase with error scaled up to 30%. The angles are given in degrees.

Fidelity $F_2$ against $\lvert r_1\rangle$ at $2t_M$ in the presence of off-diagonal disorder

Figure 11. Fidelity F2F_2 against ∣r1⟩\lvert r_1\rangle at 2tM2t_M in the presence of off-diagonal disorder. The orange line corresponds to the ideal case where there is no error. The dots are the averaged fidelity of 1000 fidelity realisations for each unknown phase with error scaled up to 30%. The angles are given in degrees.

The phase-sensing protocol given below is designed to account for the more damaging type of disorder, which is the off-diagonal disorder. The distribution of the random number error considered here is the Gaussian distribution.

It is clear from Figure 10 and Figure 11 that the fidelities approaching unity are reduced in the presence of error, from the actual unit fidelity in the ideal case. As a result, the angles retrieved from these high fidelities will suffer greater error and deviate more from their actual values. To overcome this problem, we propose a flexible protocol based on the behaviour of F1F_1 and F2F_2 for different unknown phases in the presence of error.

Our phase-sensing protocol, that includes error-mitigation, can be understood by examining the behaviour of F1F_1 and F2F_2 in Figure 10 and Figure 11. This shows that, for a given unknown phase, when F1F_1 is more affected by the error, F2F_2 is less affected, and vice versa. Therefore, our protocol uses both F1F_1 and F2F_2 to obtain two angles θ1\theta_1 and θ2\theta_2, respectively. Then, we choose the angle with less standard deviation as the best estimate to the unknown angle.

For a given data set {F1,F2}\{F_1,F_2\} associated to an unknown phase, the protocol works as follows:

  1. Use F1F_1 to find θ1\theta_1 such that θ1=cos⁡−1(2F1−1)\theta_1=\cos^{-1}(2F_1-1) Then, use F2F_2 to determine in which range the theta is: if F2≥0.5F_2\geq0.5, then 0≤θ1≤π0\leq\theta_1\leq\pi if F2<0.5F_2<0.5, then π≤θ1≤2π\pi\leq\theta_1\leq2\pi

  1. Use F2F_2 to find θ2\theta_2 such that θ2=sin⁡−1(2F2−1)\theta_2=\sin^{-1}(2F_2-1) Then, use F1F_1 to determine in which range the theta is: if F1≥0.5F_1\geq0.5, then −π2≤θ2≤π2-\frac{\pi}{2}\leq\theta_2\leq\frac{\pi}{2} if F1<0.5F_1<0.5, then π2≤θ2≤3π2\frac{\pi}{2}\leq\theta_2\leq\frac{3\pi}{2}

Step 2 employs the angle range from −π2-\frac{\pi}{2} to 3π2\frac{3\pi}{2}, because with this range the use of F1F_1 to determine the range of the F2F_2 angle then uniquely distinguishes between just two continuous regions of θ2\theta_2. This is necessary in order for the averaging of angles to work, as we now describe.

If for an unknown phase we have a set of 1000 random realisations of data {{F1,F2}1,{F1,F2}2,…,{F1,F2}1000}\{\{F_1,F_2\}_1,\{F_1,F_2\}_2,\ldots,\{F_1,F_2\}_{1000}\} and we use the above protocol for each set of data, we will obtain {{θ1,θ2}1,{θ1,θ2}2,…,{θ1,θ2}1000}\{\{\theta_1,\theta_2\}_1,\{\theta_1,\theta_2\}_2,\ldots,\{\theta_1,\theta_2\}_{1000}\}. We then take the average of all θ1\theta_1 and θ2\theta_2 as well as the separate average of all θ2\theta_2. Note that for some unknown phases the averaged θ‾2\overline{\theta}_2 can be negative because of the negative ranges in step 2 and therefore we need to add 2π2\pi to the negative angles to shift them to be in the range 3π/23\pi/2 to 2π2\pi. Each averaged angle θ‾1\overline{\theta}_1 and θ‾2\overline{\theta}_2 corresponds to the unknown phase angle, but one of these will deviate more from the actual unknown angle, due to the larger error that affects higher fidelities. Therefore, we use the standard deviations of θ1\theta_1 and θ2\theta_2 to determine which approach in the protocol (1 or 2) gives a lower standard deviation and so corresponds to the most accurate value of the unknown angle.

The graph generated in Figure 12 illustrates the performance of our sensing protocol in retrieving unknown

Obtained angles versus unknown phase, with inset showing the standard deviation

Figure 12. The obtained angles vs the unknown angles, in degrees. This is in the presence of off-diagonal disorder with error scale E/J=20%E/J = 20\% with angles being averaged over 1000 realisations. Inset: the standard deviation, σθ\sigma_\theta, of the mean of the obtained angles. It is clear that the angle around 45∘45^\circ has the highest standard deviation.

phases in the presence of a large off-diagonal disorder with error scale E/J=20%E/J = 20\%. The inset in the graph shows that the standard deviation of the mean of the obtained phases for an unknown angle of about 45∘45^\circ carries the worst error. With reference to Figure 10 and Figure 11 this is because the first quadrant is where both F1F_1 and F2F_2 lie between 0.5 and 1, and therefore carry non-negligible error. Still even the standard deviation for ≈45∘\approx45^\circ is just a small fraction of one degree, therefore, our SN system can be used as an accurate phase sensor device, with quantified performance, even when the SN device being used contains significant errors.

Conclusion

We have demonstrated the possibility of using ad-hoc unitary transformations to design multifunctional spin-networks starting from uncoupled components of known properties, in our case two short PST chains. The simple spin network system we obtained can deliver useful tasks for quantum communication, quantum information, and quantum sensing. It can be used as a router device for short-distance quantum communication or to create a maximally entangled state between two chosen network sites, preparing a resource that could be used in quantum information processing. Furthermore, we have demonstrated that the spin network we constructed can be used as a phase sensor device, that determines with quantified accuracy an unknown phase applied to a site within the system.

Our modelling investigations of disorder in the system shows that all these applications function with very high fidelity, even in the presence of significant (∼10\sim10-20%20\%) fabrication or slowly varying imperfections. In more detail, modelling investigations of the effect of off-diagonal disorder (the most damaging type of disorder) demonstrate that our SN system retains EOF of 90% or higher for errors up to E/J=20%E/J = 20\% and E/J=10%E/J = 10\% when the maximally entangled state is collected when it first forms and at 4tm4t_m, respectively. In the phase sensing protocol, it suffers a maximum error of a fraction of a degree for imperfections up to E/J=20%E/J = 20\%. High quality devices might be expected to have errors with E/J<10%E/J < 10\% or lower, therefore the robustness observed in our SN system suggests this device could support various tasks in the practical application of quantum technology.

In general, off-diagonal disorder is somewhat more damaging than diagonal disorder, so reduction of off-diagonal disorder would be the highest experimental priority. However, the system demonstrates significant robustness against all practical levels of disorder, as detailed above. In the analysis, we have considered two types of error distributions, Gaussian and flat distribution. We conclude that the flat distribution is slightly more damaging than the Gaussian distribution for very large errors, but else essentially no dependence on the form of the error distribution is exhibited.

We have demonstrated that by using ad hoc unitaries to link building blocks with special properties new behaviors emerge in the network, which can be exploited for a variety of quantum information tasks. The application of this method can be extended well beyond the examples given in this paper. The simplest case would be to consider longer PST chains, which would lead, for example, to longer-distance router or entanglement distributors. Also, here we only considered the single-excitation subspace of the SN. However, multiple excitation subspaces extend the range of possible applications of SN systems, one example being the possibility of engineering unitaries for quantum gates using the zero-, one-, and two-excitation subspaces. Furthermore, the method we propose—the engineering of coupled networks via appropriate unitaries applied to uncoupled spin chains—is also applicable to higher-excitation subspaces. We plan to explore this in future work.

Acknowledgment

AHA acknowledges support from the WW Smith Fund at the University of York.

Eigenvalues and Eigenvectors of the Hamiltonian

The eigenvalues and eigenvectors of the Hamiltonian H\mathcal{H} are given in table I. They are expressed in the site basis as labelled in Figure 2.

EigenvaluesEigenvectors
λ1=−2J\lambda_1=-\sqrt{2}J∣ϕ1⟩=122(2−21001)|\phi_1\rangle=\frac{1}{2\sqrt{2}}\begin{pmatrix}\sqrt{2}\\-2\\1\\0\\0\\1\end{pmatrix}
λ2=−2J\lambda_2=-\sqrt{2}J∣ϕ2⟩=122(00−1−221)|\phi_2\rangle=\frac{1}{2\sqrt{2}}\begin{pmatrix}0\\0\\-1\\-\sqrt{2}\\2\\1\end{pmatrix}
λ3=2J\lambda_3=\sqrt{2}J∣ϕ3⟩=122(221001)|\phi_3\rangle=\frac{1}{2\sqrt{2}}\begin{pmatrix}\sqrt{2}\\2\\1\\0\\0\\1\end{pmatrix}
λ4=2J\lambda_4=\sqrt{2}J∣ϕ4⟩=122(00122−1)|\phi_4\rangle=\frac{1}{2\sqrt{2}}\begin{pmatrix}0\\0\\1\\\sqrt{2}\\2\\-1\end{pmatrix}
λ5=0\lambda_5=0∣ϕ5⟩=12(−201001)|\phi_5\rangle=\frac{1}{2}\begin{pmatrix}-\sqrt{2}\\0\\1\\0\\0\\1\end{pmatrix}
λ6=0\lambda_6=0∣ϕ6⟩=12(00−1201)|\phi_6\rangle=\frac{1}{2}\begin{pmatrix}0\\0\\-1\\\sqrt{2}\\0\\1\end{pmatrix}

Table I. Eigenvalues (left) and eigenvectors (right) of the Hamiltonian H\mathcal{H}

The SN is first prepared so that all sites have spin down ∣00…⟩|00\ldots\rangle. Since the Hamiltonian of our system preserves the number of spin up (down), the system will not evolve unless an excitation is injected to the system. Therefore, when a single-excitation is injected at site 1 at t=0t=0

∣ψ1(0)⟩=∣r1⟩(19)|\psi_1(0)\rangle=|r_1\rangle \tag*{(19)}

the system will start evolving within the single-excitation (single spin-up) subspace. The state of the system at later time can be found by decomposing the initial state ∣ψ1(0)⟩|\psi_1(0)\rangle into the eigenvectors of the Hamiltonian (table I) using the following decomposition equation

∣ψ1(t)⟩=∑j=1N⟨ϕj∣ψ1(0)⟩e−iλjt∣ϕj⟩,(20)|\psi_1(t)\rangle=\sum_{j=1}^{N}\langle\phi_j|\psi_1(0)\rangle e^{-i\lambda_jt}|\phi_j\rangle, \tag*{(20)}

where ∣ϕj⟩|\phi_j\rangle are the eigenvectors, and λj\lambda_j are the eigenvalues. Therefore, the state of the system at tmt_m will be

∣ψ1(tm)⟩=−12(∣r3⟩+∣r6⟩).(21)|\psi_1(t_m)\rangle=-\frac{1}{\sqrt{2}}\left(|r_3\rangle+|r_6\rangle\right). \tag*{(21)}

If now an unknown phase eiθe^{i\theta} is instantaneously applied at site 6, the state of the system becomes

∣ψ1(tm)⟩θ=−12(∣r3⟩+eiθ∣r6⟩).(22)|\psi_1(t_m)\rangle_\theta=-\frac{1}{\sqrt{2}}\left(|r_3\rangle+e^{i\theta}|r_6\rangle\right). \tag*{(22)}

By decomposing the state (22) into the eigenvectors of the Hamiltonian, using (20), and then evolving the system for an additional time t=tmt=t_m, the state of the system at 2tm2t_m can be found to be

∣ψ1(2tm)⟩=1+eiθ2∣r1⟩+1−eiθ2∣r4⟩.(23)|\psi_1(2t_m)\rangle=\frac{1+e^{i\theta}}{2}|r_1\rangle+\frac{1-e^{i\theta}}{2}|r_4\rangle. \tag*{(23)}

Therefore, (23) determines the occupation of site 1 and the site 4 depending on the unknown phase θ\theta. The fidelity against ∣r1⟩|r_1\rangle at 2tm2t_m is then

∣⟨r1∣ψ1(2tm)⟩∣2=∣1+eiθ2⟨r1∣r1⟩+1−eiθ2⟨r1∣r4⟩∣2=∣1+eiθ2∣2=∣eiθ2(e−iθ2+eiθ22)∣2=cos⁡2θ2=1+cos⁡(θ)2=12(1+cos⁡θ)=F1.(24)\begin{aligned} |\langle r_1|\psi_1(2t_m)\rangle|^2 &=\left|\frac{1+e^{i\theta}}{2}\langle r_1|r_1\rangle+\frac{1-e^{i\theta}}{2}\langle r_1|r_4\rangle\right|^2\\ &=\left|\frac{1+e^{i\theta}}{2}\right|^2=\left|e^{i\frac{\theta}{2}}\left(\frac{e^{-i\frac{\theta}{2}}+e^{i\frac{\theta}{2}}}{2}\right)\right|^2\\ &=\cos^2\frac{\theta}{2}=\frac{1+\cos(\theta)}{2}\\ &=\frac{1}{2}(1+\cos\theta)=F_1. \tag*{(24)} \end{aligned}

We now have the fidelity against ∣r1⟩|r_1\rangle at 2tm2t_m as a function of θ\theta which can be used in our sensing protocol by measuring the fidelity against ∣r1⟩|r_1\rangle. However, if we choose to measure the fidelity against ∣r4⟩|r_4\rangle instead, then the sensing protocol will still work with a slight modification as the fidelity against ∣r4⟩|r_4\rangle differs from the fidelity against ∣r1⟩|r_1\rangle, and can be calculated in a similar way.

Robustness of the Phase-Sensing Protocol in the Presence of Diagonal Disorder

The fidelities F1F_1 and F2F_2 are very robust against diagonal disorder, see Figure 13 and Figure 14.

Fidelity F₁ against |r₁⟩ at 2tM in the presence of diagonal disorder

Figure 13. Fidelity F1F_1 against ∣r1⟩\lvert r_1\rangle at 2tM2t_M in the presence of diagonal disorder. The orange line corresponds to the ideal case where there is no error. The dots are the averaged fidelity of 1000 fidelity realisations for each unknown phase with error scaled up to 30%. The angles are given in degrees.

Fidelity F₂ against |r₁⟩ at 2tM in the presence of diagonal disorder

Figure 14. Fidelity F2F_2 against ∣r1⟩\lvert r_1\rangle at 2tM2t_M in the presence of diagonal disorder. The orange line corresponds to the ideal case where there is no error. The dots are the averaged fidelity of 1000 fidelity realisations for each unknown phase with error scaled up to 30%. The angles are given in degrees.

References

  1. [1]Sougato Bose. Phus. Rev. Lett., 91:207901, 2003.
  2. [2]Sougato Bose. Cont. Phys., 48(1):13–30, 2007.
  3. [3]Georgios M Nikolopoulos, David Petrosyan, and P Lambropoulos. Journal of Physics: Condensed Matter, 16(28):4991, 2004.
  4. [4]Man-Hong Yung and Sougato Bose. Phys. Rev. A., 71(3):032310, 2005.
  5. [5]L Campos Venuti, C Degli Esposti Boschi, and Marco Roncaglia. Phys. Rev. Lett., 96(24):247206, 2006.
  6. [6]Irene D’Amico, Brendon W Lovett, and Timothy P Spiller. Phys. Rev. A., 76(3):030302, 2007.
  7. [7]Marta P Estarellas, Irene D’Amico, and Timothy P Spiller. Phys. Rev. A., 95(4):042335, 2017.
  8. [8]Kieran N Wilkinson, Marta P Estarellas, Timothy P Spiller, and Irene D’Amico. Quantum Information and Computation, 18(4), 2018.
  9. [9]Jan Riegemeyer, Dan Wignall, Marta P Estarellas, Irene D’Amico, and Timothy P Spiller. Generation and robustness of quantum entanglement in spin graphs. Quantum Information Processing, 20(1):1–20, 2021.
  10. [10]Simon C. Benjamin and Sougato Bose. Phys. Rev. Lett., 90:247901, 2003.
  11. [11]Xingxiang Zhou, Zheng-Wei Zhou, Guang-Can Guo, and Marc J Feldmann. Phys. Rev. Lett., 89(19):197903, 2002.
  12. [12]Daniel Loss and David P DiVincenzo. Phys. Rev. A., 57(1):120, 1998.
  13. [13]Irene D’Amico. Microelectron. J., 37(12):1440–1441, 2006.
  14. [14]Kenneth R Brown, Jungsang Kim, and Christopher Monroe. In: npj Quantum Information, 2(1):16034, 2016.
  15. [15]Karl K Berggren. Proceedings of the IEEE, 92(10):1630–1638, 2004.
  16. [16]Amir H Karamlou, Jochen Braumüller, Yariv Yanay, Agustin Di Paolo, Patrick Harrington, Bharath Kannan, David Kim, Morten Kjaergaard, Alexander Melville, Sarah Muschinske, Bethany Niedzielski, Antti Vepsäläinen, Roni Winik, Jonilyn L Yoder, Mollie Schwartz, Charles Tahan, Terry P Orlando, Simon Gustavsson, and William D Oliver. npj quantum information, 8(1), 2022.
  17. [17]Andrea Blanco-Redondo, Imanol Andonegui, Matthew J Collins, Gal Harari, Yaakov Lumer, Mikael C Rechtsman, Benjamin J Eggleton, and Mordechai Segev. Phys. Rev. Lett., 116(16):163901, 2016.
  18. [18]Matthias Christandl, Nilanjana Datta, Tony C Dorlas, Artur Ekert, Alastair Kay, and Andrew J Landahl. Phys. Rev. A., 71(3), 2005.
  19. [19]Alastair Kay. Phys. Rev. A., 84(2), 2011.
  20. [20]Christian L Degen, F Reinhard, and Paola Cappellaro. Rev. of Mod. Phys., 89(3):035002, 2017.
  21. [21]Vittorio Giovannetti, Seth Lloyd, and Lorenzo Maccone. Nature photonics, 5(4):222–229, 2011.
  22. [22]Li-Zheng Liu, Yu-Zhe Zhang, Zheng-Da Li, Rui Zhang, Xu-Fei Yin, Yue-Yang Fei, Li Li, Nai-Le Liu, Feihu Xu, Yu-Ao Chen, et al. Nature Photonics, 15(2):137–142, 2021.
  23. [23]Xueshi Guo, Casper R Breum, Johannes Borregaard, Shuro Izumi, Mikkel V Larsen, Tobias Gehring, Matthias Christandl, Jonas S Neergaard-Nielsen, and Ulrik L Andersen. Nature Physics, 16(3):281–284, 2020.
  24. [24]Antoni Wojcik, Tomasz Łuczak, Pawel Kurzynski, Andrzej Grudka, Tomasz Gdala, and Małgorzata Bednarska. Unmodulated spin chains as universal quantum wires. Physical Review A, 72(3):034303, 2005.DOI
  25. [25]Sangchul Oh, Yun-Pil Shim, Jianjia Fei, Mark Friesen, and Xuedong Hu. Phys. Rev. B., 85(22):224418, 2012.
  26. [26]Leonardo Banchi, Tony John George Apollaro, Alessandro Cuccoli, Ruggero Vaia, and Paola Verrucchi. Phys. Rev. A., 82(5):052321, 2010.
  27. [27]Leonardo Banchi, Abolfazl Bayat, Paola Verrucchi, and Sougato Bose. Phys. Rev. Lett., 106(14):140501, 2011.
  28. [28]Alastair Kay. International Journal of Quantum Information, 8(04):641–676, 2010.
  29. [29]Peter Karbach and Joachim Stolze. Phys. Rev. A., 72(3):030301, 2005.
  30. [30]V Kostak, GM Nikolopoulos, and I Jex. Phys. Rev. A., 75(4):042319, 2007.
  31. [31]Matthias Christandl, Nilanjana Datta, Artur Ekert, and Andrew J Landahl. Phys. Rev. Lett., 92(18):187902, 2004.
  32. [32]Matthias Christandl, Nilanjana Datta, Tony C Dorlas, Artur Ekert, Alastair Kay, and Andrew J Landahl. Phys. Rev. A., 71(3), 2005.
  33. [33]William K Wootters. Quantum Inf. Comput., 1(1):27–44, 2001.
  34. [34]we use the Python library: scipy.linalg.expm(−iℏt).
  35. [35]Abolfazl Bayat, Sougato Bose, and Pasquale Sodano. Physical review letters, 105(18):187204, 2010.
  36. [36]Simone Paganelli, Salvatore Lorenzo, Tony JG Apollaro, Francesco Plastina, and Gian Luca Giorgi. Physical Review A, 87(6):062309, 2013.
  37. [37]David Zueco, Fernando Galve, Sigmund Kohler, and Peter Hänggi. Physical Review A, 80(4):042303, 2009.
  38. [38]Stefano Pirandola, B Roy Bardhan, Tobias Gehring, Christian Weedbrook, and Seth Lloyd. Nature Photonics, 12(12):724–733, 2018.
  39. [39]Luca Pezzè and Augusto Smerzi. PRX Quantum, 2(4):040301, 2021.
  40. [40]Yusef Maleki and M Suhail Zubairy. Physical Review A, 105(3):032428, 2022.
  41. [41]Uwe Dorner, Rafal Demkowicz-Dobrzanski, Brian J Smith, Jeff S Lundeen, Wojciech Wasilewski, Konrad Banaszek, and Ian A Walmsley. Physical review letters, 102(4):040403, 2009.
  42. [42]Quntao Zhuang, Zheshen Zhang, and Jeffrey H Shapiro. Physical Review A, 97(3):032329, 2018.

Paper details

vlnc:W_mmkpkbq5
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents