betaFeedback

WorksPhysics and Astronomy

High Quality Microscopic Nuclear Masses of Superheavy Nuclei

Abstract

To synthesize new superheavy elements, the accurate prediction of nuclear masses of superheavy nuclei is essential for calculations of reaction QQ values, neutron separation energies and αα-decay energies, which are important for estimating beam energies, survival probabilities and also for identifications. In this work, we include existing αα-decay energies of superheavy nuclei in the fitting procedure of extended Skyrme density functionals as corresponding nuclear masses are not available. Systematic αα-decay energies are well reproduced with deviations smaller than 0.2 MeV. The high quality αα-decay energies make it feasible for direct identification of new elements and new isotopes. The resulting binding energies in the heaviest region are surprisingly close to the inferences by AME2020. Our work should be useful for guiding experimental synthesis of new elements 119 and 120.

introduction

To synthesize new elements in the 8th row of the periodic table is now one of the major scientific problems. To date, superheavy elements up to Z=118Z=118 have been synthesized [1]. Experimental attempts to synthesize Z=119Z = 119 and 120 elements were performed in laboratories using reactions such as 58Fe+244Pu{}^{58}\mathrm{Fe} + {}^{244}\mathrm{Pu} [2] at JINR, 51V+248Cm{}^{51}\mathrm{V} + {}^{248}\mathrm{Cm} [3] at RIKEN, and 64Ni+238U{}^{64}\mathrm{Ni} + {}^{238}\mathrm{U}, 50Ti+249Bk{}^{50}\mathrm{Ti} + {}^{249}\mathrm{Bk}, 50Ti+249Cf{}^{50}\mathrm{Ti} + {}^{249}\mathrm{Cf}, 54Cr+248Cm{}^{54}\mathrm{Cr} + {}^{248}\mathrm{Cm} [4, 5] at GSI, but no evidence of new elements was observed yet. This is now a highly competitive field and reliable theoretical guidance is very desirable for such extremely difficult experiments.

For experiments, nuclear masses are important for guiding the synthesis of superheavy nuclei in several aspects. The reaction QQ values and excitation energy of compound nuclei are important in calculations of production cross sections [5, 6, 7, 8, 9]. The neutron separation energies SnS_n are important for calculations of survival probabilities of compound nuclei after multiple neutron evaporations and thus optimal bombarding energies [6, 10, 11]. The α\alpha-decay energies are important for identifying new elements and α\alpha-decay chains [1, 12, 13]. However, experimental binding energies are only available up to Z=110Z=110 nuclei [14]. Fortunately, α\alpha-decay energies are available up to Z=118Z=118, providing precious constrains on theories.

In theoretical estimations of cross sections, nuclear masses from FRDM model are widely adopted [15], which has high precision compared with available experimental data. Besides, machine learning of nuclear masses and other mass models are very precise for existing data [16, 17, 18, 19, 20, 21]. However, the extrapolation for superheavies is difficult since superheavy nuclei with strong repulsive Coulomb potential can redistribute density distributions and shell structures, so that exotic bubble or semi-bubble structures are possible [22, 23, 24, 25]. In this respect, self-consistent microscopic theories have powerful predictive capabilities for calculating nuclear masses of superheavy nuclei. It has been a longstanding issue that the precision of self-consistent microscopic theory for nuclear masses is not very satisfactory. In this work, we aim to optimize the Skyrme energy density functional theory (DFT) especially for superheavy nuclei, in which experimental α\alpha-decay energies are included in the fitting. It is known that nuclear DFT is not precise for light nuclei as quantum corrections play a significant role [26]. Actually superheavy nuclei are similar to mesoscopic systems and DFT should be a very suitable tool. As a result, we obtain high quality microscopic nuclear masses of superheavy nuclei.

methods

In this work we performed new optimizations of extended Skyrme forces by including α\alpha-decay energies of superheavy nuclei up to Z=118Z=118. The extension of Skyrme forces with an additional higher-order density dependent term is expected to provide better descriptions of finite nuclei and nuclear matter within a large range of densities [27]. The Skyrme interaction includes a two-body interaction vij(2)v_{ij}^{(2)} and a three-body interaction vijk(3)v_{ijk}^{(3)}. The low-momentum effective two-body interaction can be written as [28],

vij(2)=t0(1+x0Pσ)δ(ri−rj)+12t1(1+x1Pσ)[δ(ri−rj)k2+k′2δ(ri−rj)]+t2(1+x2Pσ)k′⋅δ(ri−rj)k+iW0(σi+σj)⋅k′×δ(ri−rj)k(1)v_{ij}^{(2)} = t_0(1+x_0P_\sigma)\delta(r_i-r_j) + \frac{1}{2}t_1(1+x_1P_\sigma)[\delta(r_i-r_j)\mathbf{k}^2+\mathbf{k}'^2\delta(r_i-r_j)] + t_2(1+x_2P_\sigma)\mathbf{k}'\cdot\delta(r_i-r_j)\mathbf{k} + iW_0(\boldsymbol{\sigma}_i+\boldsymbol{\sigma}_j)\cdot\mathbf{k}'\times\delta(r_i-r_j)\mathbf{k} \tag*{(1)}

The three-body interaction can be transformed into a density dependent two-body interaction, and an additional term is adopted in this work [27].

vijk(3)=16t3(1+x3Pσ)ρ(R)γδ(ri−rj)+16t3E(1+x3EPσ)ρ(R)γEδ(ri−rj).(2)v_{ijk}^{(3)} = \frac{1}{6}t_3(1+x_3P_\sigma)\rho(\mathbf{R})^\gamma\delta(r_i-r_j) + \frac{1}{6}t_{3E}(1+x_{3E}P_\sigma)\rho(\mathbf{R})^{\gamma_E}\delta(r_i-r_j). \tag*{(2)}

In Eqs.(1, 2), tit_i, xix_i and W0W_0 are parameters of the Skyrme interaction. The spin-orbit term can be extended to include isospin dependence and W0W_0 is replaced by b4b_4 and b4′b'_4 [29]. Besides, t3Et_{3E} and x3Ex_{3E} are additional high-order parameters. The power factor γ\gamma takes 1/6, which is the same as SLy4 [28], and the high-order power γE\gamma_E takes 1/2 [27]. The effective mass is taken as m∗/m=0.8m^*/m=0.8, while it is 0.68 for SLy4 [28]. In our work, systematic calculations are based on the self-consistent deformed Skyrme-Hartree-Fock+BCS (SHF-BCS) method [30]. In addition, the two-body center-of-mass correction is included after variations [33], which has been studied systematically before [34]. The mixed pairing interaction [31] is adopted and the pairing strengths are Vp=480V_p=480 MeV and Vn=440V_n=440 MeV. The Hartree-Fock-BCS equations are solved by the SKYAX code in axial-symmetric coordinate-spaces [30].

In the fitting procedure, we minimize the quantity

χ2=(e∞+16.00.2)2+(ρs−0.160.005)2+∑i(⟨r2⟩ch(i)−⟨r2⟩chexp(i)0.02)2+∑i(Qα(i)−Qαexp(i)0.004)2+∑i(E(i)−Eexp(i)2.0)2.(3)\chi^2 = \left(\frac{e_{\infty}+16.0}{0.2}\right)^2 + \left(\frac{\rho_s-0.16}{0.005}\right)^2 + \sum_i \left(\frac{\sqrt{\langle r^2\rangle_{\mathrm{ch}}(i)}-\sqrt{\langle r^2\rangle_{\mathrm{ch}}^{\mathrm{exp}}(i)}}{0.02}\right)^2 + \sum_i \left(\frac{Q_{\alpha}(i)-Q_{\alpha}^{\mathrm{exp}}(i)}{0.004}\right)^2 + \sum_i \left(\frac{E(i)-E^{\mathrm{exp}}(i)}{2.0}\right)^2 . \tag*{(3)}

where e∞e_{\infty} is the average energy per nucleon about -16.0 MeV at the saturation density and the saturation density

ParametersValuesParametersValues
t0t_0-2352.7014x0x_00.3103
t1t_1387.8619x1x_1-0.6574
t2t_2-133.2639x2x_2-0.04187
t3t_311819.3660x3x_30.5810
t3Et_{3E}2608.4635x3Ex_{3E}-1.0028
b4b_461.8862b4′b'_443.0657
γ\gamma1/6γE\gamma_E0.5
ρ0\rho_00.1596e∞e_{\infty}-15.9953
K∞K_{\infty}233.2128asa_s32.3017

Table 1. The refitted Skyrme parameters (Sk-SHE1) in this work by including QαQ_{\alpha} of superheavy nuclei. The incompressibility K∞K_{\infty} (MeV) and symmetry energy asa_s (MeV) at saturation density are also given.

ρs\rho_s is constrained to be around 0.16 fm−3^{-3}; Eexp⁡(i)E^{\exp}(i) and ⟨r2⟩chexp⁡(i)\sqrt{\langle r^2\rangle_{\mathrm{ch}}^{\exp}(i)} denote binding energies and charge radii of selected nuclei, as listed in the Appendix. The nuclear matter properties such as incompressibility and symmetry energy at ρs\rho_s are not strictly constrained in the fitting. The optimization is realized by the simulated annealing method via gradually decreasing temperatures, which as been applied in Refs. [27, 32]. We adjust t2t_2, t3t_3, x2x_2, x3x_3, x3Ex_{3E}, b4b_4, b4′b'_4 and determine the rest parameters are determined by relations in the equation of state. The obtained Skyrme parameters are given in the Table I.

PresentFRDM2012WS4Expt.
118294Og^{294}_{118}\mathrm{Og}11.64212.36612.19911.87
117293Ts^{293}_{117}\mathrm{Ts}11.32211.39611.62211.32
117291Ts^{291}_{117}\mathrm{Ts}11.56311.74611.71911.5
116292Lv^{292}_{116}\mathrm{Lv}10.88110.81611.12710.791
116290Lv^{290}_{116}\mathrm{Lv}11.08011.05611.08511
115291Mc^{291}_{115}\mathrm{Mc}10.4259.72610.19210.3
115289Mc^{289}_{115}\mathrm{Mc}10.48910.09610.29610.49
115287Mc^{287}_{115}\mathrm{Mc}10.69410.21610.50210.76

Table 2. Calculated QαQ_{\alpha} (MeV) in the heaviest region in this work with comparisons with experimental data [14], and predictions by FRDM2012 [15] and WS4 [20] models.

Results

Firstly the calculated α-decay energies in the heavy and superheavy region are shown from Am to Z=120Z=120. The results of even-ZZ nuclei are shown in Figure 1(a) and odd-ZZ are shown in Figure 1(b). It can be seen that the systematics of QαQ_{\alpha} are nicely reproduced. The deformed shell effects around N=162N=162 are also exhibited in QαQ_{\alpha}, but the deformed shell effects around N=152N=152 are much underestimated. Note that only QαQ_{\alpha} of even-even nuclei are included in the fitting. However, the systematics of QαQ_{\alpha} are also well reproduced for odd-ZZ nuclei. In particular, the systematics above Z=110Z=110 are very well described. Table II displays QαQ_{\alpha} in the heaviest region calculated by different models compared with experiments. Our results agree

Figure 1. Systematically calculated QαQ_{\alpha} of heavy and superheavy nuclei from Am to Z=120, using the fitted extended Skyrme parameterizations in this work. The experimental data [14] are given in dots.

with experimental data [14] within 0.2 MeV, while the largest deviations of FRDM2012 [15] and WS4 [20] are around 0.5 MeV and 0.3 MeV, respectively. This means QαQ_{\alpha} of new superheavy elements or new isotopes can be reliably predicted. Several microscopic calculations of QαQ_{\alpha} of even-even nuclei are presented in Ref. [12], in which the best average standard deviation is around 0.3 MeV. Some models such as SLy4 are not good at descriptions of binding energies but rather good at QαQ_{\alpha}. The models that are good at binding energies don’t promise good descriptions of QαQ_{\alpha} values. For example, QαQ_{\alpha} of 294Og^{294}\mathrm{Og} is much underestimated by UNEDF0 for more than 1.5 MeV [35].

Currently there are strong interests in experimental synthesis of next superheavy element 119 via 50Ti+249Bk^{50}\mathrm{Ti}+^{249}\mathrm{Bk} [5] and 54Cr+243Am^{54}\mathrm{Cr}+^{243}\mathrm{Am} [36] reactions. Figure 2 displays the possible α-decay chains after evaporations of 2 to 4 neutrons from primary Z=119Z=119 compound nuclei. It can be seen that the existing experimental data can be well reproduced. For even-NN nuclei, the experimental QαQ_{\alpha} is reproduced perfectly within 0.1 MeV. However, for odd-odd nuclei, the deviations in QαQ_{\alpha} are larger and the largest deviation is about 0.4 MeV. This is because QαQ_{\alpha} values in odd-odd nuclei are sensitive to orbital structures. QαQ_{\alpha} values of 119 isotopes by UNEDF0 are significantly smaller than our results, QαQ_{\alpha} of 294Og^{294}\mathrm{Og} is also much underestimated by UNEDF0 [35]. Our high quality microscopic results of QαQ_{\alpha} are due to the inclusion of experimental QαQ_{\alpha} in the fitting, which provides a stepping stone for reliable inferences of QαQ_{\alpha} of 119 and 120 elements. We hope our accurate QαQ_{\alpha} values are useful for direct identifications of new elements or new isotopes.

Figure 2. Calculated QαQ_{\alpha} of possible α-decay chains from Z=119Z=119 nuclei in future experiments. The experimental known data [14] are also given in blue colour.

In calculations of survival probabilities of highly excited compound superheavy nuclei after evaporations of multiple neutrons, the accurate calculations of neutron separation energies are important. Figure 3 shows results of neutron separation energies (SnS_n) of No isotopes with experimental data and Z=119Z=119 isotopes. For comparison, SnS_n from FRDM mass model are also shown. For No isotopes, SnS_n can be well reproduced except for N=152N=152, where the deformed shell at N=152N=152 is underestimated. This means the adopted pairing strength is reasonable for the superheavy region. For Z=119Z=119 isotopes, the two models are very close except for N=180N=180. The SnS_n in our calculations at N=180N=180 is 7.57 MeV, which is larger than 7.12 MeV of FRDM2012 [15] by 0.45 MeV, due to the shell effects around N=184N=184. It is known that spherical shell effects in Skyrme density functionals are usually overestimated as the effective mass is smaller than 1 [27]. Besides, SnS_n from WS4 model is close to that of FRDM2012 at N=180N=180. SnS_n at N=180N=180 by UNEDF0 is about 7.27 MeV. Thus it is likely that SnS_n is slightly overestimated by our calculations at N=180N=180. The production cross sections of superheavy nuclei are very much dependent on fission of compound nuclei, which will be studied in a forthcoming work.

Figure 3. Calculated neutron separation energies SnS_n of No and Z=119Z=119 isotopes with comparison with experimental data and FRDM2012 results.

The systematically calculated binding energies of superheavy nuclei are shown in Table IV in the Appendix. For comparison, the binding energies from FRDM2012 [15], WS4 [20] and AME2020 [14] are also listed. In the superheavy region, it can be seen that our results are systematically smaller than experiments about 0.6 MeV. However, the trends of systematics are rather stable. Generally, our results are surprisingly close to AME2020 evaluations. The FRDM2012 binding energies are overestimated by ∼4\sim4 MeV compared to AME2020 in the heaviest region. The WS4 binding energies are generally larger than AME2020 by 1∼\sim2 MeV in the heaviest region. There are already very good descriptions of global nuclear masses by UNEDF0 [35], which are also close to AME2020. Based on the binding energies, the reaction QQ values can be calculated. For 50Ti+249Bk^{50}\mathrm{Ti}+^{249}\mathrm{Bk} and 54Cr+243Am^{54}\mathrm{Cr}+^{243}\mathrm{Am} reactions, the reaction QQ values are -192.381 and -208.395 MeV, respectively. Considering the systematical underestimation of binding energies about 0.6 MeV, QQ values should be around -191.78 and -207.79 MeV, respectively. The corrected QQ values are close to that of WS4 model, while it is overestimated by FRDM2012 about 4 MeV. This is important for calculating excitation energies of compound nuclei and beam energies. In the future, the direct mass measurements of superheavy nuclei are expected to be very useful [37].

ZZNNEBE_{\mathrm{B}}QαQ_{\alpha}RcR_{\mathrm{c}}
88✓✓
1020✓
1212✓
1224✓
1428✓
2020✓✓
2028✓✓
2220✓
2426✓
2640✓
2644✓
2828✓✓
2844✓
2850✓
3434✓
3864✓
4042✓
4060✓
4850✓
4878✓
4882✓
5070✓✓
5082✓
5692✓
6096✓
6274✓
6496✓✓
7082✓
72104✓
72114✓
74108✓
74116✓
76100✓
76108✓
78104✓
8296✓
82116✓
82126✓✓
82128✓
88142✓
90126✓
90144✓
92126✓
92144✓
94146✓
94152✓
96154✓
98150✓
98152✓
98154✓✓
98156✓✓
100148✓
100150✓
100152✓
100154✓
100156✓
102150✓✓
102152✓✓
102154✓✓
104152✓✓
104154✓✓
106154✓✓

Table IV. The selected nuclei used for fitting, in which binding energies (EBE_{\mathrm{B}}), charge radii (RcR_{\mathrm{c}}) and QαQ_{\alpha} of some nuclei are employed.

summary

We have optimized the extended Skyrme density functional in particular for the superheavy mass region. Compared to existing parameterizations, experimental QαQ_{\alpha} of even-even superheavy nuclei up to Z=118Z=118 are included in the fitting. As a result, QαQ_{\alpha} of all existing superheavy nuclei can be very well reproduced, while the discrepancies are slightly larger for odd-odd superheavy nuclei. The precise prediction of QαQ_{\alpha} should be helpful for direct identification of new superheavy elements or new isotopes. The obtained binding energies are also very satisfactory, which are surprisingly close to AME2020 inferences. Neutron separation energies and reaction QQ values are also studied in details aiming the synthesis of new element 119. Thanks to the powerful supercomputing capabilities, the inferences of masses of superheavy nuclei have made great progress in recent years. We expect the present high quality microscopic nuclear masses in the heaviest region are useful for guiding experimental synthesis of superheavy nuclei.

Acknowledgments

We are grateful for discussions in the workshop on “machine learning in synthesis of superheavy nuclei” in Huizhou in August 23th, 2023. This work was supported by the National Key R&D Program of China (Grant No. 2023YFE0101500,2023YFA1606403) and National Natural Science Foundation of China under Grants No. 12335007 and 11961141003.. We also acknowledge the funding support from the State Key Laboratory of Nuclear Physics and Technology, Peking University (No. NPT2023ZX01).

References

ZNPresentFRDM2012WS4AME2020
110157-1933.996-1936.12-1934.44711935.216 (#)
110158-1942.618-1944.79-1943.14111943.536 (#)
110159-1949.511-1951.94-1950.12991950.29304
110160-1958.001-1960.4-1958.69711958.5152
110161-1964.840-1967.33-1965.58941965.292 (#)
110162-1972.780-1975.56-1973.87631973.36 (#)
110163-1978.782-1981.96-1980.10131979.25 (#)
110164-1985.995-1989.4-1987.69341986.226 (#)
110165-1991.582-1995.01-1993.35551991.825 (#)
110166-1998.668-2001.98-2000.48991999.068 (#)
110167-2004.127-2007.44-2006.03752004.649 (#)
110168-2010.957-2014.24-2013.02862011.608 (#)
110169-2016.205-2020.04-2018.52952016.891 (#)
110170-2022.996-2027.16-2025.50512023.56 (#)
110171-2028.193-2032.83-2030.84382028.82 (#)
110172-2035.035-2039.68-2037.66132035.194 (#)
110173-2040.384-2045.17-2042.95872040.43 (#)
110174-2046.708-2051.83-2049.63332046.788 (#)
111161-1965.071-1967.58-1965.59331965.744 (#)
111162-1973.226-1975.85-1973.86251973.79 (#)
111163-1979.556-1982.66-1980.53451980.198 (#)
111164-1986.930-1990.07-1988.18141987.425 (#)
111165-1992.940-1996.16-1994.33261993.548 (#)
111166-2000.068-2003.26-2001.5952000.494 (#)
111167-2005.782-2009.13-2007.57212006.604 (#)
111168-2012.870-2016.14-2014.7032013.264 (#)
111169-2018.320-2022.35-2020.66422019.36 (#)
111170-2025.342-2029.49-2027.62082025.729 (#)
111171-2030.762-2035.51-2033.3332031.528 (#)
111172-2037.770-2042.45-2040.18912037.883 (#)
111173-2043.283-2048.29-2045.87682043.38 (#)
111174-2049.756-2055-2052.52172049.72 (#)
111175-2055.032-2060.56-2057.85182054.91 (#)
112164-1988.916-1991.96-1990.25041989.684 (#)
112165-1995.115-1998.13-1996.47171995.785 (#)
112166-2002.530-2005.54-2004.21012003.268 (#)
112167-2008.476-2011.65-2010.23212009.358 (#)
112168-2015.739-2019.2-2017.9232016.56 (#)
112169-2021.486-2025.5-2023.84832022.357 (#)
112170-2028.774-2033.11-2031.1842029.554 (#)
112171-2034.411-2039.21-2036.98232035.336 (#)
112172-2041.626-2046.49-2044.2572042.244 (#)
112173-2047.353-2052.34-2049.90772047.725 (#)
112174-2054.002-2059.36-2056.91942054.338 (#)
112175-2059.485-2064.93-2062.19192059.512 (#)
112176-2065.856-2071.54-2068.8222066.112 (#)
113165-1995.663-1998.44-1996.58841996.318 (#)
113166-2003.302-2006.5-2004.3372004.057 (#)
113167-2009.459-2013.01-2010.81842010.4 (#)
113168-2016.894-2020.81-2018.60712017.861 (#)
113169-2022.906-2027.42-2024.96232023.914 (#)
113170-2030.422-2034.99-2032.59082031.091 (#)
113171-2036.262-2041.39-2038.8452037.132 (#)
113172-2043.656-2048.67-2046.10632044.02 (#)
113173-2049.558-2054.84-2052.13792050.048 (#)
113174-2056.361-2061.86-2059.14012056.642 (#)
113175-2061.992-2067.75-2064.82692062.08 (#)
113176-2068.481-2074.49-2071.49832068.662 (#)
113177-2073.864-2080.25-2076.98852074.08 (#)

Table 3. Calculated binding energies (MeV) of superheavy nuclei, with comparison with AME2020 evaluations, FRDM2012, and WS4 models.

ZNPresentFRDM2012WS4AME2020
114170-2033.000-2037.98-2035.64612034.292 (#)
114171-2039.038-2044.36-2041.86382040.315 (#)
114172-2046.647-2051.93-2049.512047.474 (#)
114173-2052.771-2058.11-2055.50782053.485 (#)
114174-2059.756-2065.62-2062.90722060.352 (#)
114175-2065.595-2071.58-2068.59792066.061 (#)
114176-2072.280-2078.82-2075.69512072.63 (#)
114177-2077.876-2084.47-2081.21882078.031 (#)
115172-2048.024-2053.07-2050.3852048.893 (#)
115173-2054.334-2059.55-2056.74372054.88 (#)
115174-2061.463-2066.87-2064.10642062.015 (#)
115175-2067.457-2073.1-2070.15012067.99 (#)
115176-2074.232-2080.43-2077.24392074.539 (#)
115177-2079.886-2086.46-2083.19092080.208 (#)
116173-2056.513-2061.56-2058.98412057.391 (#)
116174-2063.864-2069.17-2066.72122064.8 (#)
116175-2070.084-2075.39-2072.68292070.756 (#)
116176-2077.171-2083.1-2080.07642077.872 (#)
116177-2083.154-2089.1-2086.10082083.523 (#)
117174-2064.758-2069.62-2066.96172065.518 (#)
117175-2070.929-2076.14-2073.28692071.74 (#)
117176-2078.436-2083.77-2080.78032078.835 (#)
117177-2084.568-2090.11-2087.06932085.048 (#)
118175-2072.815-2077.52-2075.03812073.854 (#)
118176-2080.518-2085.1-2082.81862081.226 (#)
118177-2086.899-2091.77-2089.07592087.42 (#)
119174-2066.370-2070.51-2068.063
119175-2073.123-2077.41-2074.7834
119176-2080.821-2084.98-2082.499
119177-2087.623-2091.46-2089.1077
119178-2095.446-2099.17-2096.6519
119179-2101.854-2105.32-2102.6516
119180-2109.429-2112.41-2109.7751
119181-2115.578-2118.38-2115.7083
119182-2122.734-2125.1-2122.6296
119183-2128.614-2130.8-2128.2368
119184-2135.202-2137.2-2134.7913
120176-2082.245-2085.7-2083.6599
120177-2088.936-2092.17-2090.1904
120178-2096.862-2100.16-2098.1074
120179-2103.110-2106.33-2104.1125
120180-2110.237-2113.73-2111.5974
120181-2117.857-2119.7-2117.5237
120182-2125.210-2126.77-2124.8457
120183-2131.218-2132.47-2130.4778
120184-2137.956-2139.18-2137.4419

Table 4.

ZZNNEBE_{\mathrm{B}}QαQ_{\alpha}RcR_{\mathrm{c}}
106156✓✓
106160✓
108156✓
108158✓✓
108162✓
110160✓✓
112170✓
114174✓
114176✓
116174✓
116176✓
118176✓

Table 5.

References

  1. [1]Yu. Ts. Oganessian, et al., Phys. Rev. Lett. 109, 162501(2012).
  2. [2]Yu. Ts. Oganessian, et al., Phys. Rev. C 79, 024603(2009).
  3. [3]K. Chapman, Hunt for Element 119 to Begin, Chemistry World (September 12, 2017), https://www.chemistryworld.com/news/hunt-for-element-119-to-begin/3007977.article
  4. [4]S. Hofmann, A. Heinz, R. Mann, J. Maurer, G. Munzenberg, S. Antalic et al., Eur. Phys. J. A 52, 180 (2016).
  5. [5]J. Khuyagbaatar, A. Yakushev, C. E. Dullmann, Ch. E. Dullmann, D. Ackermann, L.-L. Andersson et al., Phys. Rev. C 102, 064602 (2020).
  6. [6]V. I. Zagrebaev, A. V. Karpov, and W. Greiner, Phys. Rev. C 85, 014608(2012)
  7. [7]Long Zhu, Wen-Jie Xie, and Feng-Shou Zhang, Phys. Rev. C 89, 024615(2014).
  8. [8]Xiang-Qun Deng and Shan-Gui Zhou, Phys. Rev. C 107, 014616 (2023)
  9. [9]Ming-Hao Zhang, Yu-Hai Zhang, Ying Zou, Chen Wang, Long Zhu, and Feng-Shou Zhang, Phys. Rev. C 109, 014622 (2024)
  10. [10]A. S. Zubov, G. G. Adamian, N. V. Antonenko, S. P. Ivanova, and W. Scheid, Phys. Rev. C 65, 024308(2002).
  11. [11]C. Y. Qiao and J. C. Pei, Phys. Rev. C 106, 014608(2022)
  12. [12]E. Olsen and W. Nazarewicz, Phys. Rev. C 99, 014317 (2019)
  13. [13]Yibin Qian and Zhongzhou Ren, Phys. Rev. C 88, 044329 (2013)
  14. [14]Meng Wang et al., Chin. Phys. C 45, 030003(2021)
  15. [15]P. Möller, A.J. Sierk, T. Ichikawa, H. Sagawa, At. Data Nucl. Data Tables 109–110, 1(2016)
  16. [16]L. Neufcourt, Y. Cao, S. A. Giuliani, W. Nazarewicz, E. Olsen, and O. B. Tarasov, Phys. Rev. C 101, 044307 (2020).
  17. [17]R. Utama, J. Piekarewicz, and H. B. Prosper, Phys. Rev. C 93, 014311 (2016).
  18. [18]Wanbing He, Qingfeng Li, Yugang Ma, Zhongming Niu, Junchen Pei, Yingxun Zhang, Sci. China Phys. Mech. Astron. 66, 282001 (2023).
  19. [19]Z. M. Niu and H. Z. Liang, Phys. Lett. B 778, 48 (2018).
  20. [20]Ning Wang, Min Liu, Xizhen Wu, Jie Meng, Phys. Lett. B 734, 215(2014)
  21. [21]C. Ma, M. Bao, Z. M. Niu, Y. M. Zhao, and A. Arima, Phys. Rev. C 101, 045204 (2020)
  22. [22]W. Nazarewicz, M. Bender, S. Ćwiok, P. H. Heenen, A. T. Kruppa, P.-G. Reinhard, and T. Vertse, Nucl. Phys. A701, 165 (2002).
  23. [23]Klaus Dietrich and Krzysztof Pomorski, Phys. Rev. Lett. 80, 37(1998).
  24. [24]Yongle Yu, Aurel Bulgac, and Piotr Magierski, Phys. Rev. Lett. 84, 412(2000).
  25. [25]J. C. Pei, F. R. Xu, and P. D. Stevenson, Phys. Rev. C 71, 034302(2005).
  26. [26]M. Bender, G. F. Bertsch, and P.-H. Heenen, Phys. Rev. Lett. 94, 102503 (2005)
  27. [27]X. Y. Xiong, J.C. Pei, W.J. Chen, Phys. Rev. C 93, 024311 (2016).
  28. [28]E. Chabanat, P. Bonche, P. Haensel, J. Meyer, R. Schaeffer, Nucl. Phys. A 635, 231 (1998).
  29. [29]P.-G. Reinhard and H. Flocard, Nucl. Phys. A 584, 467(1995).
  30. [30]P.-G. Reinhard, B. Schuetrumpf, and J. A. Maruhn, Comp. Phys. Commun. 258, 107603(2020).
  31. [31]J. Dobaczewski, W. Nazarewicz, and M.V. Stoitsov, Eur. Phys. J. A 15, 21(2002).
  32. [32]B. K. Agrawal, S. Shlomo, and V. Kim Au, Phys. Rev. C 72, 014310(2005)
  33. [33]M. Bender, K. Rutz, P.-G. Reinhard and J.A. Maruhn, Eur. Phys. J. A 7, 467(2000)
  34. [34]Z.W. Zuo, J.C. Pei, X.Y. Xiong, Y. Zhu, Chin. Phys. C 42 (6), 064106(2018).
  35. [35]M. Kortelainen, T. Lesinski, J. Moré, W. Nazarewicz, J. Sarich, N. Schunck, M. V. Stoitsov, and S. Wild, Phys. Rev. C 82, 024313 (2010)
  36. [36]B. M. Kayumov, O. K. Ganiev, A. K. Nasirov, and G. A. Yuldasheva, Phys. Rev. C 105, 014618(2022)
  37. [37]J.M. Gates, et al., Phys. Rev. Lett. 121, 222501(2018)

Paper details

vlnc:W_mr8nc4rb
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents