betaFeedback

WorksPhysics and Astronomy

Effect of the interference in overlapped double-pulse irradiation at the silicon surface

Abstract

We studied the excitation process of silicon under an intense double pulse. We employed the three-temperature (electron, hole, and lattice) model (3TM) together with Maxwell's equations. We solved Maxwell's equations by the finite-difference time-domain approach. The lattice temperature and absorbed energy at the surface increase significantly when the two laser pulses overlap with constructive interference. On the other hand, destructive interference substantially reduces the efficiency of laser excitation. On average, the overlapped double pulse increases the efficiency to about twice the distinct two-pulse case.

Introduction

In the recent years, we have been able to use intense laser pulses of duration ranging from femto- to pico-second time scales to investigate laser-matter interaction. In particular, laser processing of semiconductors using ultrashort pulses attracts great interest, due to its application in nano-structuring [1, 2]. Ultrafast laser pulse enables precise processing of the material, without causing damage in the surrounding area [3]. There are two approaches to study the laser processing, single-shot and multi-shot.

The single-shot experiment is suitable to study excitation process during the laser pulse [4, 5, 6], while the multi-shot experiments can study how to control the efficiency of laser processing [7, 8].

In the multi-shot experiment, a pulse-train with distinct laser pulses is employed. Recently, enhancement of laser ablation and processing by an overlapped double-pulse irradiation has been reported [9, 10, 11].

When the two pulses are overlapped, the interference between them plays a crucial role as shown in Figure 1. If the two pulses with same irradiance (Ir∝E2I_r \propto E^2) overlap perfectly, constructive interference makes 4-times intense laser field (4Ir∝(2E)24I_r \propto(2E)^2), while the destructive interference makes a zero intensity region [12]. In the case of non-collinear configuration (Figure 1(a)), position-dependent intensity distribution occurs. The collinear configuration (Figure 1(b)) makes constructive and destruction pulse after the second half mirror. Since the laser intensity at the target depends on the relative phase of two pulses, overlapped double-pulse experiments have been done between 4Ir4I_r and 0 intensity, we should take into account the effect of interference.

Two possible ways to make double pulse

Figure 1. Tow possible way to make double pulse. (a) Non-collinear configuration by the two sources. (b) Collinear configulation by the interferometer.

Some theoretical approaches have been proposed as the extension of two-temperature-model (TTM) [13, 14, 15]. Recently, we have developed a new numerical model including the time-evolution of electron, hole, and lattice temperatures (3 temperature model=3TM), for the laser excitation process of the silicon [16]. One of the features of 3TM is the direct treatment of electromagnetic field (EM-field) with finite-difference time-domain (FDTD) method. In the previous work, we have reported that the 3TM-FDTD reproduces the pulse-duration dependence of the damage threshold of silicon not only qualitatively but also quantitatively.

This paper is organized as follows: § 2 describes the analytical formulation of 3TM and numerical method for FDTD method, § 3 presents results of excitation in silicon for different delay time of the two pulses and laser intensity, and then finally, we would like to summarize the work in § 4.

Formulation

3TM

The time-evolution of electron and hole densities, nen_e and nhn_h is described as:

∂ne(h)∂t=αIℏω0+βI22ℏω0−γenenenh−γhnhnhne+12(θene+θhnh)+∇De(h)⋅J⃗e(h)+De(h)∇⋅J⃗e(h)−(+)μe(h)(∇⋅ne(h)F⃗+∇ne(h)⋅F⃗+ne(h)∇⋅F⃗)(1)\begin{aligned} \frac{\partial n_{e(h)}}{\partial t}={}&\frac{\alpha I}{\hbar\omega_0}+\frac{\beta I^2}{2\hbar\omega_0}-\gamma_e n_e n_e n_h-\gamma_h n_h n_h n_e+\frac{1}{2}\left(\theta_e n_e+\theta_h n_h\right)\\ &+\nabla D_{e(h)}\cdot\vec{J}_{e(h)}+D_{e(h)}\nabla\cdot\vec{J}_{e(h)}-(+)\mu_{e(h)}\left(\nabla\cdot n_{e(h)}\vec{F}+\nabla n_{e(h)}\cdot\vec{F}+n_{e(h)}\nabla\cdot\vec{F}\right) \tag*{(1)} \end{aligned}

where ω0\omega_0 is the laser frequency and α\alpha is the single photon absorption coefficient for transition from VB to CB [17]. β\beta is the two-photon absorption coefficient for which we use the interpolation of the DFT calculation when 2ℏω0>Eo2\hbar\omega_0>E_o [18], where EoE_o is the optical gap, and we employ the model described in Ref.[19, 20] for Eo≥2ℏω0≥EgE_o\geq2\hbar\omega_0\geq E_g. γe(h)\gamma_{e(h)} is the Auger re-combination coefficient [15] and θe(h)\theta_{e(h)} is the impact ionization coefficient [14]. Equation (1) also includes the effect of spatial charge distribution and the associated electric field, and J⃗e(h)\vec{J}_{e(h)}, De(h)D_{e(h)} and F⃗\vec{F} are the charge current,

J⃗e(h)=∇ne(h)+mr,e(h)ne(h)H1/2−1/2(ηe(h))kBTe(h)∇Eg+ne(h)Te(h)(2H1/2−1/2(ηe(h))H01(ηe(h))−32)∇Te(h)(2)\vec{J}_{e(h)}=\nabla n_{e(h)}+\frac{m_{r,e(h)}n_{e(h)}H_{1/2}^{-1/2}(\eta_{e(h)})}{k_BT_{e(h)}}\nabla E_g+\frac{n_{e(h)}}{T_{e(h)}}\left(2H_{1/2}^{-1/2}(\eta_{e(h)})H_0^1(\eta_{e(h)})-\frac{3}{2}\right)\nabla T_{e(h)} \tag*{(2)}

diffusion coefficient

De(h)=μe(h)0kBTe(h)−(+)eH−1/20(ηe(h)),(3)D_{e(h)}=\frac{\mu_{e(h)}^0 k_BT_{e(h)}}{-(+)e}H_{-1/2}^0(\eta_{e(h)}), \tag*{(3)}

and the electric field induced by the electron–hole separation [15], respectively. Here ηe(h)\eta_{e(h)} is the reduced Fermi level:

ηe=ϕe−ECkBTe(4)\eta_e=\frac{\phi_e-E_C}{k_BT_e} \tag*{(4)}
ηh=EV−ϕhkBTh,(5)\eta_h=\frac{E_V-\phi_h}{k_BT_h}, \tag*{(5)}

and

Hξζ(η)=Fξ(η)Fζ(η)(6)H_\xi^\zeta(\eta)=\frac{F_\xi(\eta)}{F_\zeta(\eta)} \tag*{(6)}

where Fξ(η)F_\xi(\eta) is the Fermi integral given by

Fξ(η)=1Γ(ξ+1)∫0∞dx xξ1+exp⁡(x−η).(7)F_\xi(\eta)=\frac{1}{\Gamma(\xi+1)}\int_0^\infty dx\,\frac{x^\xi}{1+\exp(x-\eta)}. \tag*{(7)}

Fξ(η)F_\xi(\eta) are used depending on whether η\eta is positive [21] or negative [22].

The total dielectric function along with the effect of band structure re-normalization [23] is expressed by

ϵ(ω)=1+n0−nen0ϵL(ω+δEg/ℏ)+ϵD(ω)(8)\epsilon(\omega)=1+\frac{n_0-n_e}{n_0}\epsilon_L(\omega+\delta E_g/\hbar)+\epsilon_D(\omega) \tag*{(8)}

where n0n_0 is the density of valence electrons. It should be noted that nen_e and nhn_h are nearly the same due to the effect of F⃗\vec{F} and can be approximated at nen_e. ϵL(ω)\epsilon_L(\omega) is the innate dielectric function, δEg\delta E_g represents the band re-normalization by carrier density, and ϵD\epsilon_D is the complex dielectric function calculated from Drude model. The temperature dependent optical parameters of silicon are referred to from Ref.[17]. Since this temperature dependence in ϵL(ω)\epsilon_L(\omega) does not include band re-normalization, we shift the photon energy by δEg\delta E_g (Table 2). ϵD\epsilon_D accounts for the effect of plasma in the excited system. Considering the electron and hole sub-systems,

κl\kappa_lLattice thermal conductivity [28]1585Tl−1.23 W/(cm K)1585T_l^{-1.23}\ \mathrm{W/(cm\ K)}
ClC_lLattice heat capacity [28]1.978+3.54×10−4Tl−3.68Tl−2 J/(cm3 K)1.978+3.54\times10^{-4}T_l-3.68T_l^{-2}\ \mathrm{J/(cm^3\ K)}
τ\taue-ph relaxation time [29, 30, 31]τ0(1+(ne/(8×1020))2)\tau_0(1+(n_e/(8\times10^{20}))^2)
τ0\tau_0e-ph relaxation time constant [14, 32]240 fs240\ \mathrm{fs}
me∗m^*_eDensity-of-State effective mass of electron at 300 K [33, 34]0.36me0.36m_e
mh∗m^*_hDensity-of-State effective mass of hole at 300 K [33, 34]0.81me0.81m_e
me,cd∗m^*_{e,cd}Effective mass of electron for conduction [24]0.26me0.26m_e
mh,cd∗m^*_{h,cd}Effective mass of hole conduction [24]0.37me0.37m_e
μe0\mu^0_eElectron mobility [34] [35]8.5×10−3 m2/Vs8.5\times10^{-3}\ \mathrm{m^2/Vs}
μh0\mu^0_hHole mobility [34] [35]1.9×10−3 m2/Vs1.9\times10^{-3}\ \mathrm{m^2/Vs}
γe\gamma_eAuger recombination coefficient [15, 36]2.3×10−31 cm6/s2.3\times10^{-31}\ \mathrm{cm^6/s}
γh\gamma_hAuger recombination coefficient [15, 36]7.8×10−32 cm6/s7.8\times10^{-32}\ \mathrm{cm^6/s}
θe(h)\theta_{e(h)}Impact ionization coefficient [28]3.6×1010exp⁡(−1.5Eg/kBTe(h))s−13.6\times10^{10}\exp(-1.5E_g/k_BT_{e(h)})\mathrm{s}^{-1}
EgE_gBand gap function1.16−0.72×10−4Tl2/(Tl+1108)−1.5×10−8ne1/3 eV1.16-0.72\times10^{-4}T_l^2/(T_l+1108)-1.5\times10^{-8}n_e^{1/3}\ \mathrm{eV} [14]
δEg\delta E_gBand re-normalization−1.5×10−8ne1/3 eV-1.5\times10^{-8}n_e^{1/3}\ \mathrm{eV}

Table 2. List of parameters

ϵD(ω)=−4πnee2ω02[1me,cd∗(1+iνeω0)+1mh,cd∗(1+iνhω0)](9)\epsilon_D(\omega)=-\frac{4\pi n_e e^2}{\omega_0^2}\left[\frac{1}{m^*_{e,cd}\left(1+i\frac{\nu_e}{\omega_0}\right)}+\frac{1}{m^*_{h,cd}\left(1+i\frac{\nu_h}{\omega_0}\right)}\right] \tag*{(9)}

where me(h),cd∗m^*_{e(h),cd} is the effective mass for the conductivity [24] and νe\nu_e and νh\nu_h are the collision frequencies, describing the electron-hole (e−he-h), electron-phonon (e−phe-ph) and hole-phonon (h−phh-ph) collisions. The e−phe-ph and h−phh-ph collisions are assumed to have the same frequency which is dependent on lattice temperature [24]. Effect of electron-ion core collisions is also considered [25]. The electron temperature dependence of the electron-ion core collisions is fitted to the damping time data from Sato et al. [25] as τe−ion=0.98+0.2(kBT)−3.5 fs\tau_{e-ion}=0.98+0.2(k_BT)^{-3.5}\,\mathrm{fs}. The collision frequencies for e−he-h interactions are calculated as per the model presented in Ref.[26]. The total one-photon absorption coefficient including free-carrier absorption is

αf=2πλℑ[ϵ(ω)],(10)\alpha_f=\frac{2\pi}{\lambda}\Im\left[\sqrt{\epsilon(\omega)}\right], \tag*{(10)}

where λ\lambda is the laser wavelength in vacuum.

Since 3TM considers three sub-systems, viz. electron, hole and lattice, their temperatures also evolve separately. The temperature evolution is expressed as:

Ce∂Te∂t=mr,e(αfI+βI2)+Egγenenh−Ceτ(Te−Tl)−∇⋅w⃗e−∂ne∂t(mr,eEg+32kBTeH−1/21/2(ηe))−mr,ene(∂Eg∂Tl∂Tl∂t+∂Eg∂ne∂ne∂t),(11)\begin{aligned} C_e\frac{\partial T_e}{\partial t}={}&m_{r,e}(\alpha_f I+\beta I^2)+E_g\gamma_e n_e n_h\\ &-\frac{C_e}{\tau}(T_e-T_l)-\nabla\cdot\vec{w}_e\\ &-\frac{\partial n_e}{\partial t}\left(m_{r,e}E_g+\frac{3}{2}k_BT_eH^{1/2}_{-1/2}(\eta_e)\right)\\ &-m_{r,e}n_e\left(\frac{\partial E_g}{\partial T_l}\frac{\partial T_l}{\partial t}+\frac{\partial E_g}{\partial n_e}\frac{\partial n_e}{\partial t}\right), \tag*{(11)} \end{aligned}
Ch∂Th∂t=mr,h(αfI+βI2)+Egγhnhne−Chτ(Th−Tl)−∇⋅w⃗h−∂nh∂t(mr,hEg+32kBThH−1/21/2(ηh))−mr,hnh(∂Eg∂Tl∂Tl∂t+∂Eg∂nh∂nh∂t),(12)\begin{aligned} C_h\frac{\partial T_h}{\partial t}={}&m_{r,h}(\alpha_f I+\beta I^2)+E_g\gamma_h n_h n_e\\ &-\frac{C_h}{\tau}(T_h-T_l)-\nabla\cdot\vec{w}_h\\ &-\frac{\partial n_h}{\partial t}\left(m_{r,h}E_g+\frac{3}{2}k_BT_hH^{1/2}_{-1/2}(\eta_h)\right)\\ &-m_{r,h}n_h\left(\frac{\partial E_g}{\partial T_l}\frac{\partial T_l}{\partial t}+\frac{\partial E_g}{\partial n_h}\frac{\partial n_h}{\partial t}\right), \tag*{(12)} \end{aligned}
Cl∂Tl∂t=−∇⋅(κl∇Tl)+Ceτ(Te−Tl)+Chτ(Th−Tl).(13)C_l\frac{\partial T_l}{\partial t}=-\nabla\cdot(\kappa_l\nabla T_l)+\frac{C_e}{\tau}(T_e-T_l)+\frac{C_h}{\tau}(T_h-T_l). \tag*{(13)}

The third and fourth terms in Eq. (11) account for the loss of energy due to electron-lattice interaction and energy current. The last two terms on right hand side include the changes in carrier density and band gap energy. The heat capacities Ce(h)C_{e(h)} are defined from the internal energy as

Ce(h)=∂Ue(h)∂Te(h)=∂∂Te(h)ne(h)(mr,e(h)Eg+32kBTe(h)H1/23/2(ηe(h))),(14)\begin{aligned} C_{e(h)}&=\frac{\partial U_{e(h)}}{\partial T_{e(h)}}\\ &=\frac{\partial}{\partial T_{e(h)}}n_{e(h)}\left(m_{r,e(h)}E_g+\frac{3}{2}k_BT_{e(h)}H^{3/2}_{1/2}(\eta_{e(h)})\right), \tag*{(14)} \end{aligned}
Ce=−32nekBηe(1−H1/23/2(ηe)H1/2−1/2(ηe))+32nekBH1/23/2(ηe),Ch=−32nhkBηh(1−H1/23/2(ηh)H1/2−1/2(ηh))+32nhkBH1/23/2(ηh).(15)\begin{aligned} C_e&=-\frac{3}{2}n_ek_B\eta_e\left(1-H^{3/2}_{1/2}(\eta_e)H^{-1/2}_{1/2}(\eta_e)\right)\\ &\quad+\frac{3}{2}n_ek_BH^{3/2}_{1/2}(\eta_e),\\ C_h&=-\frac{3}{2}n_hk_B\eta_h\left(1-H^{3/2}_{1/2}(\eta_h)H^{-1/2}_{1/2}(\eta_h)\right)\\ &\quad+\frac{3}{2}n_hk_BH^{3/2}_{1/2}(\eta_h). \tag*{(15)} \end{aligned}

w⃗e(h)\vec{w}_{e(h)} are the energy currents given by

w⃗e=−1e(2kBTeH01(ηe)+mr,eEg)j⃗e−κe∇Te,(16)\vec{w}_e=-\frac{1}{e}\left(2k_BT_eH^1_0(\eta_e)+m_{r,e}E_g\right)\vec{j}_e-\kappa_e\nabla T_e, \tag*{(16)}

and

w⃗h=1e(2kBThH01(ηh)+mr,hEg)j⃗h−κh∇Th.(17)\vec{w}_h=\frac{1}{e}\left(2k_BT_hH^1_0(\eta_h)+m_{r,h}E_g\right)\vec{j}_h-\kappa_h\nabla T_h. \tag*{(17)}

Here

j⃗e=neμe0H1/20(ηe){mr,e∇Eg+kB∇ηeTe+2kBH01(ηe)∇Te}(18)\vec{j}_e=n_e\mu^0_eH^0_{1/2}(\eta_e)\left\{m_{r,e}\nabla E_g+k_B\nabla\eta_eT_e+2k_BH^1_0(\eta_e)\nabla T_e\right\} \tag*{(18)}

and

j⃗h=−nhμeH1/20(ηh){mr,h∇Eg+kB∇ηhTh+2kBH10(ηh)∇Th}(19)\vec{j}_{h}=-n_{h}\mu_{e}H_{1/2}^{0}(\eta_{h})\left\{m_{r,h}\nabla E_{g}+k_{B}\nabla\eta_{h}T_{h}+2k_{B}H_{1}^{0}(\eta_{h})\nabla T_{h}\right\} \tag*{(19)}

are the electrical current by the Zeeback effect and gradient of the quasi Fermi-levels of electron and hole.

FDTD

The propagation of the laser pulse is described by solving the Maxwell’s equations using FDTD method. Mur’s absorbing boundary condition is employed to prevent reflection from the boundary [27]. Another salient feature is that the electric field is considered to be complex for the calculation of laser intensity, to ensure a non-zero field at all points in time and space. Assuming a one-dimensional system, the electric field is:

E(x,t)=E1(x,t)eiωt+E2(x,t)ei(ωt+ϕ)(20)E(x,t)=E_{1}(x,t)e^{i\omega t}+E_{2}(x,t)e^{i(\omega t+\phi)} \tag*{(20)}

Here E1(2)E_{1(2)} includes Gaussian envelope, and ϕ\phi is the relative phase between the two pulses. The electric field of the two pulses are expressed as

E1(x,t)∣x=0=E0e−(t−Tpeak)2T2,\left.E_{1}(x,t)\right|_{x=0}=E_{0}e^{-\frac{(t-T_{\mathrm{peak}})^{2}}{T^{2}}},
E2(x,t)∣x=0=E0e−(t−Tpeak−Td)2T2,(21)\left.E_{2}(x,t)\right|_{x=0}=E_{0}e^{-\frac{(t-T_{\mathrm{peak}}-T_{d})^{2}}{T^{2}}}, \tag*{(21)}

where T=tp/(4ln⁡2)T=t_{p}/(4\sqrt{\ln2}), tpt_{p} being the FWHM pulse duration, TpeakT_{\mathrm{peak}} is the time of peak intensity, and TdT_{d} is the delay time. In this work we assume only two replica pulses. We define the peak of the first pulse (TpeakT_{\mathrm{peak}}) as 4T4T to ensure the negligible field intensity at t=0t=0. The laser irradiance (Ir(x,t)I_{r}(x,t)) is defined by the absolute value of the electric field as

Ir(x,t)=c8πRe[ϵ]∣E(x,t)∣2.(22)I_{r}(x,t)=\frac{c}{8\pi}\mathfrak{Re}[\sqrt{\epsilon}]|E(x,t)|^{2}. \tag*{(22)}

Evaluation of charge current induced by the laser field is a crucial part of the module. We calculate the current with and without excitation i.e., for photo-absorption and dielectric response. For dielectric response, j0(x,t)j_{0}(x,t) is calculated as:

j0(x,t)=χr(ω)∂P(x,t)∂t=−χr(ω)∂2A(x,t)c∂t2(23)j_{0}(x,t)=\chi_{r}(\omega)\frac{\partial P(x,t)}{\partial t}=-\chi_{r}(\omega)\frac{\partial^{2}A(x,t)}{c\partial t^{2}} \tag*{(23)}

where A(x,t)A(x,t) is the vector potential, PP is the polarization and χr\chi_{r} is the real part of susceptibility (χ=(ϵ−1)/4π\chi=(\epsilon-1)/4\pi). The Maxwell’s equation thus, becomes

1c2(1+4πχr(ω))∂2A(x,t)∂t2−∂2A(x,t)∂x2=4πcj(x,t)(24)\frac{1}{c^{2}}(1+4\pi\chi_{r}(\omega))\frac{\partial^{2}A(x,t)}{\partial t^{2}}-\frac{\partial^{2}A(x,t)}{\partial x^{2}}=\frac{4\pi}{c}j(x,t) \tag*{(24)}

where

j(x,t)=(αf(ω)+β(ω)Ir(x,t))cRe[ϵ]4πE(x,t)(25)j(x,t)=\left(\alpha_{f}(\omega)+\beta(\omega)I_{r}(x,t)\right)\frac{c\mathfrak{Re}[\sqrt{\epsilon}]}{4\pi}E(x,t) \tag*{(25)}

is the current associated with photo-absorption.

Results and Discussions

The behavior of the EM-field with constructive and destructive interference is the important point of overlapped double pulse. Figure 2 shows the time-evolution of laser field at the Si surface. The irradiance of the single pulse is 1×10121 \times10^{12} W/cm2^{2}, the frequency is 1.55 eV, and the pulse duration in FWHM is 100 fs. Since our approach includes reflection at the surface, the irradiance at the surface is decreased from the incident pulse.

Irradiance at the silicon surface with constructive and destructive interference

Figure 2. Irradiance at the silicon surface with (a) constructive and (b) destructive interference. The irradiance of the incident lasers are 1×10121 \times10^{12} W/cm2^2.

The constructive interference makes a 4-times more intense pulse with Td=0T_{d}=0 fs, while the destructive interference makes net zero intensity. As TDT_{D} increases, the peak intensity of pulse approaches the intensity of a single pulse. With Td=200T_{d}=200 fs, we cannot distinguish the difference between ϕ=0\phi=0 and π\pi.

The constructive interference (ϕ=0\phi=0) may be important because it increases the efficiency of laser processing. Figure 3 shows the time-evolution of electron, hole, and lattice temperatures at the surface together with the laser irradiance. We can see an abrupt increase of electron and hole temperatures with Td≤100T_{d}\leq100 fs. Above

Time-evolution of electron, hole, and lattice temperatures with different delay time

Figure 3. Time-evolution of electron (red-solid), hole (green-dotted), and lattice (blue-dashed) temperatures with different delay time.

ne(h)n_{e(h)}electron(hole) densityTe(h)T_{e(h)}electron(hole) temperature
n0n_0Density of valence electronsTlT_lLattice temperature
ηe(h)\eta_{e(h)}Reduced quasi Fermi-levelϕe(h)\phi_{e(h)}Quasi Fermi-level
μe(h)0\mu^0_{e(h)}Electron(hole) mobility for Maxwell-Boltzmann distributionECE_CLower energy limit of Conduction band
μe(h)\mu_{e(h)}Electron(hole) mobilityEVE_VUpper energy limit of Valence band
κe(h)\kappa_{e(h)}kB2σe(h)Tce2[6H20(ηe(h))−4H01(ηe(h))2]\frac{k_B^2\sigma_{e(h)}T_c}{e^2}[6H^0_2(\eta_{e(h)})-4H^1_0(\eta_{e(h)})^2]: Thermal conductivitymr,e(h)m_{r,e(h)}me(h)∗me∗+mh∗\frac{m^*_{e(h)}}{m^*_e+m^*_h}: Ratio of the effective mass
ϕe(h)\phi_{e(h)}quasi Fermi-levelσe(h)\sigma_{e(h)}−(+)ene(h)μe(h)0H1/20(ηe(h))-(+)en_{e(h)}\mu^0_{e(h)}H^0_{1/2}(\eta_{e(h)}): electrical conductivity

Table 1. List of symbols and notations used in the text

Td=200T_d = 200 fs, there is a knee structure after the first pulse. In particular, with Td=400T_d = 400 fs, we can see a kink at the second pulse in the TlT_l. This “kink” structure in TlT_l may occur with TDT_D longer than the typical time scale of electron-phonon energy transfer (τ0=240\tau_0 = 240 fs).

In some cases, the ϕ\phi is random. The ϕ\phi-dependence of the TlT_l-dependence at 10 ps and absorbed energy are shown in Figure 4. The ϕ\phi-dependence is significant in Td<200T_d < 200 fs. The thick-solid line indicates the average. On average, the interference effect increases the TlT_l to about 1.53 times and absorbed energy to about 2.5 times with respect to distinct two-pulse case (Td=500T_d = 500 fs).

Relative phase dependence of the (a) Tl and (b) absorbed energy

Figure 4. Relative phase dependence of the (a) TlT_l and (b) absorbed energy.

The TdT_d-dependence for Td>200T_d > 200 fs shows slow increase as TdT_d. This relatively weak TdT_d-dependence may due to the TlT_l-dependence of the excitation rate. The most intense TlT_l-dependence in our approach is the phonon-assisted one-photon absorption in α\alpha[17]. The increase in α\alpha induces the increase of TlT_l and energy absorption at the second pulse.

The two horizontal lines indicates the results with different laser parameters which gives same fluence as the case of two distinct pulses. The double-pulse excitation is more efficient than a longer pulse (200 fs), while it is less efficient than an intense pulse (2×10122 \times10^{12} W/cm2^2). Since our calculation includes the two photon absorption, higher peak intensity induces more efficient photo-absorption. In the case of same peak intensity, the excitation by double pulse is efficient due to the TlT_l-dependence in α\alpha.

Figure 5 shows the incident intensity dependence of (a) TlT_l at 10 ps and (b) absorbed energy. The intensity-dependence is significant as TdT_d decreases. At intensity of 1×10111 \times10^{11} W/cm2^2, the excitation is negligible with all TdT_d, while the TlT_l exceeds melting temperature (1687 K) with 5×10115 \times10^{11} W/cm2^2, and the energy exceeds the bonding energy (2.3 eV/atom) between 7×10117 \times10^{11} and 1×10121 \times10^{12} W/cm2^2 overlapped double-pulse.

Irradiance-dependence with constructive interference

Figure 5. Irradiance-dependence with constructive interference.

Summary

In this work we apply the 3TM [16] for silicon to the double-pulse excitation process. We found that the constructive and destructive interference between the two overlapped pulses affect the excitation efficiency significantly. On the average, the overlapped double-pulse increases the efficiency about two times compared to the distinct double-pulse case. Our results indicates that we can enhance and control the excitation of silicon by the overlapped double pulse. Also, our result indicates that the excitation efficiency with two pulses increases depending on the time-delay due to the decrease of the band gap by the lattice temperature.

Aknowledgements

This research is supported by MEXT Quantum Leap Flagship Program (MEXT Q-LEAP) under Grant No. JPMXS0118067246. This research is also partially supported by JST-CREST under Grant No. JP-MJCR16N5. The numerical calculations are carried out using the computer facilities of the SGI8600 at Japan Atomic Energy Agency (JAEA).

References

  1. [1]Gattass, R.R., Mazur, E.: Femtosecond laser micromachining in transparent materials. Nat. Photonics 2(4), 219–225 (2008). https://doi.org/10.1038/nphoton.2008.47
  2. [2]Stoian, R., Colombier, J.-P.: Advances in ultrafast laser structuring of materials at the nanoscale. Nanophotonics 9(16), 4665–4688 (2020). https://doi.org/10.1515/nanoph-2020-0310
  3. [3]Sugioka, K., Cheng, Y.: Ultrafast lasers—reliable tools for advanced materials processing. Light Sci. Appl 3(4), 149–149 (2014). https://doi.org/10.1038/lsa.2014.30
  4. [4]Kumada, T., Akagi, H., Itakura, R., Otobe, A. Tomohitoand Yokoyama: Femtosecond laser ablation dynamics of fused silica extracted from oscillation of time-resolved reflectivity. Journal of Applied Physics 115(10), 103504 (2014) https://doi.org/10.1063/1.4867438. https://doi.org/10.1063/1.4867438
  5. [5]Kumada, T., Otobe, T., Nishikino, M., Hasegawa, N., Hayashi, T.: Dynamics of spallation during femtosecond laser ablation studied by time-resolved reflectivity with double pump pulses. Applied Physics Letters 108(1), 011102 (2016) https://doi.org/10.1063/1.4939231. https://doi.org/10.1063/1.4939231
  6. [6]Dinh, T.-H., Medvedev, N., Ishino, M., Kitamura, T., Hasegawa, N., Otobe, T., Higasiguchi, T., Sakaue, K., Washio, M., Hatano, T., Kon, A., Kubota, Y., Inubushi, Y., Owada, S., Shibuya, T., Ziaja, B., Nishikino, M.: Controlled strong excitation of silicon as a step towards processing materials at sub-nanometer precision. Communications Physics 2(1), 150 (2019). https://doi.org/10.1038/s42005-019-0253-2
  7. [7]Nakamura, A., Mizuta, T., Shimotsuma, Y., Sakakura, M., Otobe, T., Shimizu, M., Miura, K.: Picosecond burst pulse machining with temporal energy modulation [invited]. Chin. Opt. Lett. 18(12), 123801 (2020)DOI
  8. [8]Otobe, T., Hayashi, T., Nishikino, M.: Effect of plasma formation on the double pulse laser excitation of cubic silicon carbide. Applied Physics Letters 111(17), 171107 (2017) https://doi.org/10.1063/1.4997363. https://doi.org/10.1063/1.4997363
  9. [9]Zhang, K.H., Li, X., Rong, W.L., Ran, P., Li, B., Feng, P., Yang, Q.Q.: Control of surface ablation on fused silica with ultra-fast laser double-pulse based on seed electrons dynamics control. In: Li, J., Hong, M., Jiang, L. (eds.) AOPC 2015: Micro-/Nano Optical Manufacturing Technologies; and Laser Processing and Rapid Prototyping Techniques, vol. 9673, pp. 206–213. SPIE, ??? (2015). https://doi.org/10.1117/12.2202346. International Society for Optics and Photonics. https://doi.org/10.1117/12.2202346
  10. [10]Zhang, J., Wang, S., Wang, M., Chu, Z.: Femtosecond laser double pulses nanofabrication on silicon. IOP Conference Series: Materials Science and Engineering 565(1), 012018 (2019). https://doi.org/10.1088/1757-899X/565/1/012018
  11. [11]Wang, M., Guo, Q., Wang, S., Zhu, W., Tian, F., Wei, Y., Ji, P., Li, X., Yang, J.: Interference femtosecond laser stamping of micro-grating structures and time-resolved observation of its dynamics. Opt. Express 28(12), 18376–18386 (2020). https://doi.org/10.1364/OE.390012
  12. [12]Drosd, R., Minkin, L., Shapovalov, A.S.: Interference and the law of energy conservation. The Physics Teacher 52(7), 428–430 (2014) https://doi.org/10.1119/1.4895362. https://doi.org/10.1119/1.4895362
  13. [13]Anisimov, S., Kapeliovich, B., Perelman, T., et al.: Electron emission from metal surfaces exposed to ultrashort laser pulses. Zh. Eksp. Teor. Fiz 66(2), 375–377 (1974)
  14. [14]Chen, J.K., Tzou, D.Y., Beraun, J.E.: Numerical investigation of ultrashort laser damage in semiconductors. Int. J. Heat Mass Transf. 48(3), 501–509 (2005). https://doi.org/10.1016/j.ijheatmasstransfer.2004.04.09. 015
  15. [15]Silaeva, E.P., Vella, A., Sevelin-Radiguet, N., Martel, G., Decanini, A., Itina, T.E.: Ultrafast laser-triggered field ion emission from semiconductor tips. New J. Phys. 14(11), 113026 (2012). https://doi.org/10.1088/1367-2630/14/11/113026
  16. [16]Venkat, P., Otobe, T.: Three-temperature modeling of laser-induced damage process in silicon. arXiv:2202.01964 (2022) https://arxiv.org/abs/2202.01964
  17. [17]Green, M.A.: Self-consistent optical parameters of intrinsic silicon at 300k including temperature coefficients. Sol. Energy Mater. Sol. Cells 92(11), 1305–1310 (2008). https://doi.org/10.1016/j.solmat.2008.06.009
  18. [18]Murayama, M., Nakayama, T.: Ab initio calculations of two-photon absorption spectra in semiconductors. Phys. Rev. B 52, 4986–4997 (1995). https://doi.org/10.1103/PhysRevB.52.4986
  19. [19]Garcia, H., Kalyanaraman, R.: Phonon-assisted two-photon absorption in the presence of a dc-field: the nonlinear franz–keldysh effect in indirect gap semiconductors. Journal of Physics B: Atomic, Molecular and Optical Physics 39(12), 2737–2746 (2006). https://doi.org/10.1088/0953-4075/39/12/009
  20. [20]Furey, B.J., Barba-Barba, R.M., Carriles, R., Bernal, A., Mendoza, B.S., Downer, M.C.: I{χ(3)} spectra of 110-cut gaas, gap, and si near the two-photon absorption band edge. Journal of Applied Physics 129(18), 183109 (2021) https://doi.org/10.1063/5.0047478. https://doi.org/10.1063/5.0047478
  21. [21]Fukushima, T.: Precise and fast computation of generalized fermi–dirac integral by parameter polynomial approximation. Appl. Math. Comput. 270, 802–807 (2015). https://doi.org/10.1016/j.amc.2015.08.094
  22. [22]Cloutman, L.D.: Numerical Evaluation of the Fermi-Dirac Integrals. Astrophys. J., Suppl. Ser. 71, 677 (1989). https://doi.org/10.1086/191393
  23. [23]Sokolowski-Tinten, K., von der Linde, D.: Generation of dense electron-hole plasmas in silicon. Phys. Rev. B 61, 2643–2650 (2000). https://doi.org/10.1103/PhysRevB.61.2643
  24. [24]Rämer, A., Osmani, O., Rethfeld, B.: Laser damage in silicon: Energy absorption, relaxation, and transport. J. Appl. Phys. 116(5), 053508 (2014). https://doi.org/10.1063/1.4891633
  25. [25]Sato, S.A., Shinohara, Y., Otobe, T., Yabana, K.: Dielectric response of laser-excited silicon at finite electron temperature. Phys. Rev. B 90, 174303 (2014). https://doi.org/10.1103/PhysRevB.90.174303
  26. [26]Terashige, T., Yada, H., Matsui, Y., Miyamoto, T., Kida, N., Okamoto, H.: Temperature and carrier-density dependence of electron-hole scattering in silicon investigated by optical-pump terahertz-probe spectroscopy. Phys. Rev. B 91, 241201 (2015). https://doi.org/10.1103/PhysRevB.91.241201
  27. [27]Mur, G.: Absorbing boundary conditions for the finite-difference approximation of the time-domain electromagnetic-field equations. IEEE Trans. Electromagn. Compat. EMC-23(4), 377–382 (1981). https://doi.org/10.1109/TEMC.1981.303970
  28. [28]van Driel, H.M.: Kinetics of high-density plasmas generated in si by 1.06- and 0.53-μm picosecond laser pulses. Phys. Rev. B 35, 8166–8176 (1987). https://doi.org/10.1103/PhysRevB.35.8166
  29. [29]Yoffa, E.J.: Screening of hot-carrier relaxation in highly photoexcited semiconductors. Phys. Rev. B 23, 1909–1919 (1981). https://doi.org/10.1103/PhysRevB.23.1909
  30. [30]Sjodin, T., Petek, H., Dai, H.-L.: Ultrafast carrier dynamics in silicon: A two-color transient reflection grating study on a (111) surface. Phys. Rev. Lett. 81, 5664–5667 (1998). https://doi.org/10.1103/PhysRevLett.81.5664
  31. [31]Harb, M., Ernstorfer, R., Dartigalongue, T., Hebeisen, C.T., Jordan, R.E., Miller, R.J.D.: Carrier relaxation and lattice heating dynamics in silicon revealed by femtosecond electron diffraction. The Journal of Physical Chemistry B 110(50), 25308–25313 (2006) https://doi.org/10.1021/jp064649n. https://doi.org/10.1021/jp064649n. PMID: 17165976
  32. [32]Ichibayashi, T., Tanimura, K.: Ultrafast carrier relaxation in si studied by time-resolved two-photon photoemission spectroscopy: Intravalley scattering and energy relaxation of hot electrons. Phys. Rev. Lett. 102, 087403 (2009). https://doi.org/10.1103/PhysRevLett.102.087403
  33. [33]Barber, H.D.: Effective mass and intrinsic concentration in silicon. Solid-State Electronics 10(11), 1039–1051 (1967). https://doi.org/10.1016/0038-1101(67)90122-0
  34. [34]Lipp, V.P., Rethfeld, B., Garcia, M.E., Ivanov, D.S.: Atomistic-continuum modeling of short laser pulse melting of si targets. Phys. Rev. B 90, 245306 (2014). https://doi.org/10.1103/PhysRevB.90.245306 Meyer, J.R., Kruer, M.R., Bartoli, F.J.: Optical heating in semiconductors: Laser damage in ge, si, insb, and gaas. J. Appl. Phys. 51(10), 5513–5522 (1980). https://doi.org/10.1063/1.327469
  35. [36]Dziewior, J., Schmid, W.: Auger coefficients for highly doped and highly excited silicon. Applied Physics Letters 31(5), 346–348 (1977) https://doi.org/10.1063/1.89694. https://doi.org/10.1063/1.89694

Paper details

vlnc:W_mrrsuwkv
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents