betaFeedback

WorksPhysics and Astronomy

Self-sustained deformable rotating liquid He cylinders: The pure normal fluid 3^3He and superfluid 4^4He cases

Abstract

We have studied self-sustained, deformable, rotating liquid He cylinders of infinite length. In the normal fluid 3^3He case, we have employed a classical model where only surface tension and centrifugal forces are taken into account, as well as the Density Functional Theory (DFT) approach in conjunction with a semi-classical Thomas-Fermi approximation for the kinetic energy. In both approaches, if the angular velocity is sufficiently large, it is energetically favorable for the 3^3He cylinder to undergo a shape transition, acquiring an elliptic-like cross section which eventually becomes two-lobed. In the 4^4He case, we have employed a DFT approach that takes into account its superfluid character, limiting the description to vortex-free configurations where angular momentum is exclusively stored in capillary waves on a deformed cross section cylinder. The calculations allow us to carry out a comparison between the rotational behavior of a normal, rotational fluid (3^3He) and a superfluid, irrotational fluid (4^4He).

Introduction

Helium is the only element in nature that may remain liquid at temperatures close to absolute zero. At very low temperatures, liquid helium is the ultimate quantum fluid, able to form nanoscopic droplets and macroscopic samples as well. In particular, 4He^{4}\mathrm{He} droplets are considered as ideal matrices for spectroscopic studies of embedded atoms and molecules, and for the study of superfluidity at the atomic scale, including the study of quantum vortices.

Determining the experimental size and shape of helium droplets is a challenging problem. First determinations focussed on droplets made of up to several thousand atoms produced by the adiabatic expansion of a cold helium gas.1 The experiments analyzed the scattering cross section of Kr atoms dispersed by a jet of 4He^{4}\mathrm{He} or 3He^{3}\mathrm{He} droplets using DFT density profiles as input.2,3 More recently, large helium droplets made of 10810^{8} – 101110^{11} atoms have been created by the hydrodynamic instability of a very low temperature (TT) liquid helium jet passing through the nozzle of a molecular beam apparatus, as reviewed in Ref. 4. These large drops have been analyzed to determine their shape and, in the case of 4He^{4}\mathrm{He}, whether they host arrays of quantized vortices or not.5

Two experimental techniques have been used to characterize large helium drops. Coherent diffractive imaging of x-rays from a free electron laser5–8 gives access to a model-independent determination of the two-dimensional (2D) projection of the drop density on a plane perpendicular to the x-ray incident direction via iterative phase retrieval algorithms. Irradiation of helium droplets with intense extreme ultraviolet pulses9,10 and subsequent measurement of wide-angle diffraction patterns provides access to full three-dimensional information. However, so far the analysis of the densities is model-dependent as their shape has to be parameterized using some guessed solid figure which is then used to produce a diffraction pattern which may be compared to the experimental one. The conclusion drawn from these experiments, which are mostly on 4He^{4}\mathrm{He} drops, is that helium drops are mainly spherical and that only a small fraction of them (about 7%7\%)10 are deformed and host some angular momentum, which is likely acquired during their passage through the nozzle of the experimental apparatus. The experimental results have been compared to calculations made for incompressible viscous droplets only subject to surface tension and centrifugal forces,11–15 or based on a Density Functional Theory (DFT) approach16–18 specifically designed to describe liquid helium.

It has been found6,10 that spinning 4He^{4}\mathrm{He} droplets follow the sequence of shapes characteristic of rotating viscous droplets.11,14 This unexpected result is due to the presence of vortex arrays in the spinning droplets,17,18 that confer to them the appearance of rotating rigid-bodies.

Large 3He^{3}\mathrm{He} drops have been detected as well in the coherent diffractive imaging of x-rays experiments.7,8 It is worth mentioning that classical and DFT calculations for 3He^{3}\mathrm{He} droplets have yielded very similar relationships between angular velocity and angular momentum,23 which is due to the fact that at the experimental temperatures (T∼0.15T \sim0.15 K)24 liquid 3He^{3}\mathrm{He} behaves as a normal fluid with a finite viscosity.

So far, the most reliable approach to study spinning helium droplets is the DFT approach. It has, however, the limitation that the complexity of DFT calculations dramatically grows with droplet size, making them prohibitively costly even for a few tens of thousands of atoms, which is significantly below typical experimental sizes. Addressing large droplets is especially needed to study large vortex array configurations in 4He^{4}\mathrm{He} droplets as well as the recently produced spinning mixed 3He^{3}\mathrm{He}-4He^{4}\mathrm{He} droplets,25 for which classical26,27 and DFT28 calculations are already available. To circumvent this limitation, it is often resorted to a simpler cylindrical geometry which restricts the calculations to less demanding 2D configurations while the basic physics may still be caught by the model. Indeed, self-sustained 4He^{4}\mathrm{He} circular and deformed cylinder configurations have been used to describe the density of spinning 4He^{4}\mathrm{He} droplets on the plane of symmetry perpendicular to the rotation axis.6,29 We stress that these are self-sustained configurations, and not rotating cylindrical vessels (circular or elliptic) filled with helium for which there exists a vast literature, see e.g. Refs. 30, 32, and 51 and references therein.

In this work we describe self-sustained liquid He cylinders of infinite length under rotation. The equilibrium and stability of a rotating column of a viscid fluid subject to planar disturbances have been addressed in detail[33] [27] applying techniques similar to those used to describe rotating viscid droplets.11,13 As in the present study, only translationally symmetric (planar) disturbances leading to non-circular cylinder cross sections have been considered there. Axisymmetric Rayleigh instabilities, always present in fluid columns, were set aside.

In the case of 3He^{3}\mathrm{He}, we have employed a classical model for viscous liquids subject to centrifugal and surface tension forces,13 and a normal liquid DFT[34] [20] plus semiclassical approach, treating the 3He^{3}\mathrm{He} cylinders in the DFT plus rotating Thomas-Fermi (TF) framework.[35] [23] This semiclassical approach is justified by the large number of atoms per unit length in the cylinder. The DFT-TF method represents a realistic framework allowing to make the calculations affordable. It can be extended to mixed helium systems as well.21,28 As for droplets,[36] thermal effects on the energetics and morphology of the cylinder are expected to be negligible at the experimental temperatures, so we shall use a zero temperature method.23 Zero temperature means here a very low TT, but above T∼2.7T \sim2.7 mK at which 3He^{3}\mathrm{He} becomes superfluid.

In the 4He^{4}\mathrm{He} case, we have employed a DFT approach which takes into account its superfluid character,22 limiting the description to vortex-free configurations where angular momentum is exclusively stored in capillary waves on a deformed cross-section cylinder. Under these conditions, the calculations allow us to carry out a sensible comparison between the rotational behavior of a normal fluid (3He^{3}\mathrm{He}) and of an irrotational superfluid (4He^{4}\mathrm{He}) for fixed values of the atom number and angular momentum per unit length. In the presence of vortices in addition to capillary waves, this comparison is obscured as one compares simply connected configurations for 3He^{3}\mathrm{He} cylinders with multiply connected configurations of vortex-hosting 4He^{4}\mathrm{He} cylinders. Let us recall that in the case of droplets, the presence of vortex arrays dramatically changes the appearance of the droplet;18 at fixed angular momentum and atom number in the droplet, the higher the number of vortices the more compact (i.e., closer to an oblate axisymmetric shape) the droplet becomes. Hence, the universal behavior found for classical droplets11 is lost. At variance, we have found that, independently of their size, the 4He^{4}\mathrm{He} equilibrium configurations hosting capillary waves alone lay on a line in the scaled angular momentum and angular velocity plane,11 disclosing a de facto nearly universal behavior. Let us mention that it has recently been found37 that, under appropriate experimental conditions, moderately deformed vortex-free 4He^{4}\mathrm{He} drops prevail when the number of atoms is smaller than about 10810^{8}.

This work is organized as follows. In Sec. II we present the methods used to describe He cylinders, thoroughly described in Refs. 13, 17, and 23 in the case of droplets. The results are discussed in Sec. III, and a summary and discussion are presented in Sec. IV. We outline in Appendix § 2.1 the rationale of how we have defined dimensionless angular velocity and dimensionless angular momentum for the cylinder geometry, and present in Appendices B (3He^{3}\mathrm{He}) and C (4He^{4}\mathrm{He}) the results of a simple model where the cross section of the deformed cylinder is restricted to be elliptical, treating 3He^{3}\mathrm{He} (4He^{4}\mathrm{He}) as a rotational (irrotational) fluid; we call this model Elliptic Deformations (ED) model.

Models

Classical approach to viscous systems subjected to centrifugal and surface tension forces

The incompressible Navier-Stokes equations are solved in a reference frame rotating about a fixed axis perpendicular to the solution domain. An arbitrary Lagrange-Euler technique is employed which allows the solution domain to deform and conform to the evolving shape of the drop. The rate of displacement of the outer boundary is set by the normal velocity at the outer boundary and surface tension effects are modeled as boundary normal stresses that are proportional to the degree of boundary curvature.[38] Models are time dependent and are initialized with elliptical domains, with rotation axis passing through the origin, with semimajor and semiminor axes of (1+δ)(1+\delta) and (1+δ)−1(1+\delta)^{-1} where δ=0.01\delta= 0.01. The small difference from an initial circular shape serves to seed possible non-axisymmetric perturbations. At each time step of the simulation, the moment of inertia of the drop is calculated and used to update the rotation rate of the reference frame, assuming constant angular momentum. Models are run until the drop shapes achieve a steady state.

The equations are solved using the commercial finite element modeling package Comsol Multiphysics.[39] Refs. 26 and 27 give more detailed descriptions of the classical numerical model.

Classical rotating droplets subject to surface tension and centrifugal forces alone are characterized by two dimensionless variables, angular momentum Λ\Lambda and angular velocity Ω\Omega, that allow description of the sequence of droplet shapes in a universal phase diagram, independently of the droplet size.11–13 For the cylinder geometry, the expressions for Ω\Omega and Λ\Lambda are27 (see also Appendix A)

Ω=mρ0R38γ ωΛ=ℏ8γR5mρ0=L(1)\begin{aligned} \Omega&= \sqrt{\frac{m\rho_{0}R^{3}}{8\gamma}}\,\omega\\ \Lambda&= \frac{\hbar}{\sqrt{8\gamma R^{5}m\rho_{0}}}=\mathcal{L} \tag*{(1)} \end{aligned}

where L\mathcal{L} is the angular momentum per unit length in ℏ\hbar units, γ\gamma and ρ0\rho_{0} are the surface tension and atom density of liquid He at zero temperature and pressure, mm is the mass of the He atom, and RR is the sharp radius of the circular He cylinder at rest. If N\mathcal{N} is the number of He atoms per unit length of the cylinder, R=N/(πρ0)R=\sqrt{\mathcal{N}/(\pi\rho_{0})}. For liquid 3He{}^{3}\mathrm{He}, γ=0.1132 K A˚−2\gamma=0.1132\ {\rm K}\,{\rm\AA}^{-2} and ρ0=0.016342 A˚−3\rho_{0}=0.016342\ {\rm\AA}^{-3}. Besides, ℏ2/m=16.0836 K A˚2\hbar^{2}/m=16.0836\ {\rm K}\,{\rm\AA}^{2}. For liquid 4He{}^{4}\mathrm{He} one has γ=0.274 K A˚−2\gamma=0.274\ {\rm K}\,{\rm\AA}^{-2}, ρ0=0.021836 A˚−3\rho_{0}=0.021836\ {\rm\AA}^{-3}, and ℏ2/m=12.1194 K A˚2\hbar^{2}/m=12.1194\ {\rm K}\,{\rm\AA}^{2}. Similar to He droplets made of N\mathcal{N} atoms, which are denoted as HeN_{\mathcal{N}}, we shall denote as HeN_{\mathcal{N}} helium cylinders with N\mathcal{N} atoms per unit length.

DFT plus semiclassical Thomas-Fermi approach to normal fluid 3He{}^{3}\mathrm{He}

We have adapted to the cylindrical geometry the approach used in Ref. 23 to describe rotating 3He{}^{3}\mathrm{He} droplets. Within DFT, the total energy EE of a 3HeN{}^{3}\mathrm{He}_{\mathcal{N}} cylinder at zero temperature is written as a functional of the 3He{}^{3}\mathrm{He} atom density per unit volume ρ\rho, here taken from Ref. 20:

E[ρ]=∫dr ℏ22m∗τ+∫dr Ec[ρ]≡∫dr E[ρ](2)E[\rho]=\int d\mathbf{r}\,\frac{\hbar^{2}}{2m^{*}}\tau+\int d\mathbf{r}\,\mathcal{E}_{c}[\rho]\equiv\int d\mathbf{r}\,\mathcal{E}[\rho] \tag*{(2)}

The first term is the kinetic energy of 3He{}^{3}\mathrm{He} with an effective mass m∗m^{*}, and τ\tau is the kinetic energy density per unit volume, both depending on ρ\rho. In the TF approximation of Ref. 20 (see also Ref. 34),

τ=35(3π2)2/3ρ5/3+118(∇ρ)2ρ(3)\tau=\frac{3}{5}(3\pi^{2})^{2/3}\rho^{5/3}+\frac{1}{18}\frac{(\nabla\rho)^{2}}{\rho} \tag*{(3)}

The second term in Eq. (3) is a Weizsäcker-type gradient correction which is necessary in order to have helium density profiles with an exponential fall-off at the surface. The energy functional, represented by the energy per unit volume E[ρ]\mathcal{E}[\rho] in Eq. (2) within the TF approximation given by Eq. (3) accurately reproduces the equation of state of the bulk liquid and yields the correct value for the 3He{}^{3}\mathrm{He} surface tension.20

The equilibrium configuration of the cylinder is obtained by solving the Euler-Lagrange (EL) equation arising from functional minimization of Eq. (2)

δδρ{ℏ22m∗τ+Ec}=μ(4)\frac{\delta}{\delta\rho}\left\{\frac{\hbar^{2}}{2m^{*}}\tau+\mathcal{E}_{c}\right\}=\mu \tag*{(4)}

where μ\mu is the 3He{}^{3}\mathrm{He} chemical potential corresponding to the number of He atoms per unit length of the cylinder. Defining Ψ=ρ\Psi=\sqrt{\rho}, Eq. (4) can be written as a Schrödinger-like equation20

H[ρ]Ψ=μΨ(5)\mathcal{H}[\rho]\Psi=\mu\Psi \tag*{(5)}

where H\mathcal{H} is the one-body effective Hamiltonian that results from the functional variation.

When the rotating cylinder –made of fermions in the normal phase– is addressed in the TF approximation, the Fermi sphere is shifted by the motion of the cylinder as a whole; this adds to its energy density E[ρ]\mathcal{E}[\rho] a rotational term which has the rigid body appearance[35] [23]

R[ρ]=∫dr R[ρ]=∫dr E[ρ]+12Iω2=∫dr E[ρ]+L22I(6)\mathcal{R}[\rho]=\int d\mathbf{r}\,\mathcal{R}[\rho]=\int d\mathbf{r}\,\mathcal{E}[\rho]+\frac{1}{2}I\omega^{2}=\int d\mathbf{r}\,\mathcal{E}[\rho]+\frac{L^{2}}{2I} \tag*{(6)}

where R[ρ]\mathcal{R}[\rho] is the Routhian density of the cylinder, LL is the angular momentum, ω\omega is the angular velocity, and II is the moment of inertia.

Due to the translational invariance of the system along the symmetry axis of the cylinder (zz direction), the atom density per unit volume only depends on the xx and yy variables and the integral on zz just yields the length ℓ\ell of the cylinder. Hence, Eq. (5) is a two-dimensional partial differential equation on the xx and yy variables, and from now on the energy, Routhian and moment of inertia, integrated on the xx and yy variables are quantities per unit length. In particular,

I=m∫dx dy (x2+y2)ρ(x,y)(7)I=m\int dx\,dy\,(x^{2}+y^{2})\rho(x,y) \tag*{(7)}

is the moment of inertia per unit length of the 3He{}^{3}\mathrm{He} cylinder around the zz-axis, and ℏL=Iω\hbar L=I\omega is the angular momentum per unit length. We stress that the rigid-body moment of inertia is not an imposed ingredient within the DFT-TF framework.[35] [23] It arises naturally from the TF approximation.

Equations (5) and (14) have been solved adapting the 4He{}^{4}\mathrm{He}-DFT-BCN-TLS computing package[40] to the 3He{}^{3}\mathrm{He} functional. To take full advantage of the Fast Fourier Transform[41] used to carry out the convolution integrals in the DFT mean field H[ρ]\mathcal{H}[\rho], we work in Cartesian coordinates and impose periodic boundary conditions (PBC) on the surface of the box where calculations are carried out. In the xx and yy directions, this box has to be large enough to accommodate the cylinder in such a way that the He density is sensibly zero at the box surface, the effective wave function Ψ(r)\Psi(\mathbf{r}) being defined at the nodes of a 2D Nx×NyN_x \times N_y grid spanning the xx and yy directions. The box is made 3D by adding one single point in the zz direction, Nz=1N_z=1. A space step of 0.8 Å has been used. We

have recalculated several configurations in the circular-to-deformed bifurcation region using a space step of 0.4 Å and have found that the values of the magnitudes shown in Table I are strictly the same. The imposed PBC thus make Ψ(r)\Psi(\mathbf{r}) translationally invariant in the zz direction as required by the cylinder geometry and in practice one still handles Nx×NyN_x \times N_y points instead of the Nx×Ny×NzN_x \times N_y \times N_z points needed for droplets. The differential operators in H[ρ]\mathcal{H}[\rho] are approximated by 13-point formulas. The stationary solution corresponding to given values of NN and L\mathcal{L} is obtained starting from an initial guess Ψ0(r)\Psi_0(\mathbf{r}) and relaxing it using an imaginary-time step relaxation method.[42]

Λ\LambdaΩ\Omegaaxa_x (Å)byb_y (Å)ARARI/IcirI/I_{cir}RR (K/Å)
C00171.41171.4111-3641.965
C0.200.12768171.42171.4211.0001-3639.989
C0.400.25525171.45171.4511.0006-3634.064
C0.600.38261171.49171.4911.0013-3624.194
C0.800.50964171.55171.5511.0023-3610.389
C0.900.57300171.59171.5911.0029-3602.013
C0.930.59198171.60171.6011.0031-3599.310
C0.940.59830171.61171.6111.0031-3598.389
C0.950.60463171.61171.6111.0032-3597.458
C0.960.61095171.62171.6211.0033-3596.518
C1.000.63623171.63171.6311.0036-3592.658
C1.100.69933171.68171.6811.0043-3582.326
C1.200.76227171.70171.7011.0051-3571.019
C1.500.95006171.90171.9011.0081-3531.273
D0.900.57297172.43170.781.0101.0029-3602.013
D0.930.59171174.20169.051.0301.0035-3599.305
D0.940.59709177.13166.191.0661.0052-3598.384
D0.950.59563186.72157.021.1891.0184-3597.461
D0.960.59633190.93153.111.2471.0279-3596.539
D1.000.58093210.16136.121.5441.0991-3592.901
D1.100.55159237.00114.552.0691.2733-3584.134
TL1.200.52539256.81100.082.5661.4583-3575.799
TL1.300.50254273.3488.813.0781.6517-3567.855
TL1.500.46269301.7071.084.2452.0699-3552.930
TL1.700.42981326.0757.225.6982.5254-3539.125
TL1.800.41542337.2551.266.5802.7666-3532.583
TL2.000.39071357.8040.728.7883.2683-3520.123
TL2.500.33938403.9218.7421.5504.7035-3492.000

Table I. Configuration characteristics of a rotating 3^{3}HeN_N cylinder with N=1500N = 1500 atoms/Å calculated in this work within DFT. C: circular configurations; D: deformed, elliptic-like configurations; TL: two-lobed configurations. Λ\Lambda and Ω\Omega are the dimensionless angular momentum and velocity, and RR is the Routhian per unit length. ARAR is the aspect ratio (AR=1AR = 1 for circular configurations), and I/IcirI/I_{cir} is the DFT moment of inertia in units of that of the 3^{3}He1500_{1500} circular cylinder of sharp radius at Λ=0\Lambda= 0, Icir=mN2/(2πρ0)I_{cir} = mN^{2}/(2\pi\rho_{0}).

It is worth mentioning that at variance with the classical model for viscous liquids subject to centrifugal and surface tension forces, universality in terms of the scaled Λ\Lambda and Ω\Omega variables is lost when droplets or cylinders are described using more refined models that incorporate other effects, e.g., liquid compressibility and surface thickness effects. Yet, these variables have been found to be very useful as they allow us to scale the properties of the calculated droplets, which have a radius of tens of nanometers,17,23 to those of the experimental ones which have a radius of hundreds of nanometers.5,7

For any stationary configuration obtained by solving the EL equation, a sharp density surface is determined by calculating the locus at which the helium density equals ρ0/2\rho_0/2. Two lengths are defined corresponding to the shortest and largest distances from the zz (rotation) axis to the sharp surface. We call axa_x the largest distance, and byb_y the shortest one. The aspect ratio is defined as AR=ax/byAR=a_x/b_y, being one for cylinders (circular cross section) and larger than one otherwise (deformed cross section).

DFT approach to superfluid 4He{}^{4}\mathrm{He}

Within DFT, the energy of the 4HeN{}^{4}\mathrm{He}_N cylinder is written as a functional of the atom density per unit volume ρ(r)\rho(\mathbf{r}) as22

E[ρ]=T[ρ]+Ec[ρ]=ℏ22m∫dr∣∇Ψ(r)∣2+∫dr Ec[ρ](8)E[\rho]=T[\rho]+E_c[\rho]=\frac{\hbar^2}{2m}\int d\mathbf{r}\lvert\nabla\Psi(\mathbf{r})\rvert^2+\int d\mathbf{r}\,\mathcal{E}_c[\rho] \tag*{(8)}

where the first term is the kinetic energy, with ρ(r)=∣Ψ(r)∣2\rho(\mathbf{r})=\lvert\Psi(\mathbf{r})\rvert^2, and the functional Ec\mathcal{E}_c contains the interaction term (in the Hartree approximation) and additional terms which describe non-local correlation effects.[43]

The equilibrium configuration of the cylinder is obtained by solving the EL equation resulting from the functional minimization of Eq. (8),

{−ℏ22m∇2+δEcδρ}Ψ(r)=H[ρ]Ψ(r)=μΨ(r)(9)\left\{-\frac{\hbar^2}{2m}\nabla^2+\frac{\delta\mathcal{E}_c}{\delta\rho}\right\}\Psi(\mathbf{r})=\mathcal{H}[\rho]\Psi(\mathbf{r})=\mu\Psi(\mathbf{r}) \tag*{(9)}

where μ\mu is the 4He{}^{4}\mathrm{He} chemical potential.

Similarly to the case of 4He{}^{4}\mathrm{He} droplets, to study spinning 4He{}^{4}\mathrm{He} cylinders we work in the corotating frame at angular velocity ω\omega,

E′[ρ]=E[ρ]−ℏω⟨L^z⟩(10)E'[\rho]=E[\rho]-\hbar\omega\langle\hat{L}_z\rangle \tag*{(10)}

where L^z\hat{L}_z is the dimensionless angular momentum operator in the zz-direction; one looks for solutions of the EL equation resulting from the functional variation of E′[ρ]E'[\rho],

{H[ρ]−ℏωL^z}Ψ(r)=μΨ(r)(11)\left\{\mathcal{H}[\rho]-\hbar\omega\hat{L}_z\right\}\Psi(\mathbf{r})=\mu\Psi(\mathbf{r}) \tag*{(11)}

The differential operators in H[ρ]\mathcal{H}[\rho] and the angular momentum operator are approximated by 13-point formulas. As in the 3He{}^{3}\mathrm{He} case, the stationary solution corresponding to given values of NN and L\mathcal{L} is obtained starting from an initial guess Ψ0(r)\Psi_0(\mathbf{r}) and relaxing it using an imaginary-time step relaxation method.[42]

Angular momentum can be stored in a superfluid 4He{}^{4}\mathrm{He} sample in the form of surface capillary waves and/or quantized vortices.6,18 Since we are considering only the contribution of capillary waves, we have used the so-called “imprinting” procedure starting the imaginary time relaxation from for the effective wave function

Ψ0(r)=ρ01/2(r)eiαxy.(12)\Psi_0(\mathbf{r})=\rho_0^{1/2}(\mathbf{r})e^{i\alpha xy}. \tag*{(12)}

The complex phase eiαxye^{i\alpha xy} imprints a surface capillary wave with quadrupolar symmetry around the zz axis,[44] and ρ0(r)\rho_0(\mathbf{r}) is an arbitrary, vortex-free cylinder density. The initial value of α\alpha is guessed, and during the iterative solution of Eq. (11) the shape of the cylinder changes to provide, at convergence, the lowest energy vortex-free configuration for the desired LL value, which requires adjustment of the value of ω\omega every iteration.

Writing Ψ(r)≡ϕ(r)exp⁡[iS(r)]\Psi(\mathbf{r})\equiv\phi(\mathbf{r})\exp[iS(\mathbf{r})], the velocity field of the superfluid is

v(r)=ℏmIm⁡{∇Ψ(r)Ψ(r)}=ℏm∇S(r)(13)\mathbf{v}(\mathbf{r})=\frac{\hbar}{m}\operatorname{Im}\left\{\frac{\nabla\Psi(\mathbf{r})}{\Psi(\mathbf{r})}\right\}=\frac{\hbar}{m}\nabla S(\mathbf{r}) \tag*{(13)}

It can be visualized with streamlines of the superfluid flow.18 In the 3He^{3}\mathrm{He} case, the velocity field consists of circumferences centered at the rotation axis, with v(r)=ωr\mathbf{v}(\mathbf{r})=\omega\mathbf{r}, r\mathbf{r} being the distance to the axis.

Equations (9) and (11) are two-dimensional partial differential equations depending on the xx and yy variables which have been solved using the 4He^{4}\mathrm{He}-DFT-BCN-TLS computing package.[40]

Results

We look for solutions of the EL equation resulting from the functional variation of R[ρ]\mathcal{R}[\rho]:

{H[ρ]−m2(LI)2(x2+y2)}Ψ(x,y)=μΨ(x,y).(14)\left\{\mathcal{H}[\rho]-\frac{m}{2}\left(\frac{L}{I}\right)^2(x^2+y^2)\right\}\Psi(x,y)=\mu\Psi(x,y). \tag*{(14)}

We have carried out detailed DFT calculations for a cylinder with N=1500\mathcal{N}=1500 atoms/Å which has a radius R=170.93R=170.93 Å (3He^{3}\mathrm{He}) or R=147.87R=147.87 Å (4He^{4}\mathrm{He}) at rest. As illustrated in Figure 1 for 3He^{3}\mathrm{He}, liquid helium is fairly incompressible and hence the cross section area of the rotating HeN\mathrm{He}_{\mathcal{N}} cylinder remains sensibly equal to πR2\pi R^2 during deformation.

Figure 1. Density profile of the 3HeN{}^{3}\mathrm{He}_{\mathcal{N}} cylinder with N=1500\mathcal{N}=1500 atoms/Å for two circular configurations corresponding to Λ=0\Lambda=0 (red dashed line) and 1.51.5 (black solid line). The Λ=1.5\Lambda=1.5 cylinder is metastable.

3He^{3}\mathrm{He} cylinders

Table I collects the DFT results obtained for 3He^{3}\mathrm{He} cylinders. To determine the circular-to-deformed bifurcation point, one has to compare the Routhian R[ρ]\mathcal{R}[\rho] of the circular cylinder to that of the deformed cylinder for the same Λ\Lambda and N\mathcal{N} values; the configuration with the smaller R[ρ]\mathcal{R}[\rho] is the equilibrium configuration.

One can see from Table I that the difference between the Routhians of the circular and deformed cylinders is very small in a wide interval of Λ\Lambda values between 0.900 and 0.960, which makes rather delicate to determine the bifurcation point within the DFT. We take the angular momentum at which the aspect ratio AR=ax/byAR=a_x/b_y starts to clearly differ from one as the bifurcation point, having obtained (Λ,Ω)=(0.90,0.573)(\Lambda,\Omega)=(0.90,0.573). In the classical model, bifurcation occurs at (Λ,Ω)=(0.960,0.616)(\Lambda,\Omega)=(0.960,0.616).27

To compare the classical and DFT results for the Routhian (total energy including rotation energy) per unit length, one has to remember that in classical models only surface and rotation energy are considered. Consequently, we have to identify first the energies that are implicitly involved in the DFT calculation. To this end, it is convenient to split the energy per unit length of the cylinder E/ℓE/\ell into different terms, in a way similar in spirit as how the energy of the atomic nucleus is written as a “mass formula”, namely

E/ℓ=ϵ0N+2πRγ+E0=ϵ0πR2ρ0+2πRγ+E0(15)E/\ell=\epsilon_0\mathcal{N}+2\pi R\gamma+E_0=\epsilon_0\pi R^2\rho_0+2\pi R\gamma+E_0 \tag*{(15)}

where ϵ0=−2.49\epsilon_{0} = -2.49 K is the energy per atom in liquid 3^{3}He and E0E_{0} is a constant term. Let us mention that the presence of a constant term in the nuclear mass formula is common in the most elaborated ones[45] and it appears after leading terms of R3R^{3} (volume), R2R^{2} (surface), and RR (curvature) type. In the case of the cylinder, it naturally comes after the surface term. It is worth noticing that mass formulas have also been adjusted for 3^{3}He and 4^{4}He droplets which include a fairly large constant term.[34] [21]

The parameter E0E_{0} can be determined from the DFT values at Λ=0\Lambda= 0. For N=1500N = 1500 atoms/Å, Rˉ=170.93\bar{R} = 170.93 Å and ϵ0N\epsilon_{0}\mathcal{N} is -3735 K/Å, yielding E0=28.58E_{0} = 28.58 K/Å.

We thus see that the volume and constant energy contributions have to be subtracted from the DFT Routhian

for a sensible comparison with the classical results. Since in the classical calculations energies per unit length are made dimensionless dividing them by 8γR8\gamma R, the quantity that can be directly compared with the classical result is the dimensionless reduced DFT Routhian per unit length defined as

18γR{R[ρ]−ϵ0N−E0}(16)\frac{1}{8\gamma R}\left\{R[\rho]-\epsilon_{0}\mathcal{N}-E_{0}\right\} \tag*{(16)}

We have represented it as a function of Λ\Lambda in Figure 2 together with the classical result. It can be seen that they agree very well, with some minor differences showing up at large deformations.

Figure 2. Reduced DFT Routhian per unit length (R[ρ]−ϵ0N−E0)/(8γR)(R[\rho]-\epsilon_0N-E_0)/(8\gamma R) as a function of rescaled angular momentum. Black triangles: DFT circular configurations. Red circles: DFT deformed configurations. Solid blue line: classical circular configurations. Dashed blue line: classical deformed configurations.

Figure 3 shows the aspect ratio as a function of the rescaled angular momentum Λ\Lambda for 3^{3}He cylinders obtained with the DFT, classical and ED approaches. The outlines of several classical shapes are drawn in the inset.

Aspect-ratio versus rescaled angular momentum

Figure 3. Aspect-ratio vs. rescaled angular momentum for the 3He{}^{3}\mathrm{He} cylinder in the DFT, classical and ED approaches. AR=1AR=1 corresponds to circular configurations. The lines are cubic splines of the calculated points. Also shown are the outlines of classical shapes with angular momenta Λ=0.5\Lambda=0.5, 1, 1.5 and 2.

We display in Figure 4 the density of the 3^{3}He cylinder for several values of Λ\Lambda obtained with the DFT method; superposed to the densities we have plotted several circulation lines. In the DFT approach the cross section of the cylinder becomes two-lobed at Λ∼1.1\Lambda\sim1.1. The outlines of classical shapes are superimposed to the two-dimensional DFT densities. It can be seen that they are very similar to the DFT ones except for Λ=1\Lambda= 1, for which the DFT density is more deformed because this configuration is further away from the DFT bifurcation than the classical one is from the classical bifurcation point. This effect diminishes at larger deformations where the differences are minor.

Two-dimensional densities for the ${}^{3}\mathrm{He}_{1500}$ cylinder

Figure 4. Two-dimensional densities for the 3He1500{}^{3}\mathrm{He}_{1500} cylinder in the DFT approach. From top to bottom, they correspond to Λ=0.5\Lambda=0.5, 1, 1.5, and 2. The color bar represents the 3He{}^{3}\mathrm{He} density in Å−3^{-3}. Several streamlines are superimposed. Also shown are the outlines of classical shapes (magenta lines).

Figure 5 shows the Ω(Λ)\Omega(\Lambda) equilibrium line for 3^{3}He obtained with the classical and DFT approaches. This line is very similar for both methods. As for 3^{3}He droplets,23 the minor differences in the deformed branch are attributed to a better description of the droplet surface and to quantum kinetic energy contributions in the DFT approach which, together with compressibility effects, are lacking in classical models. Also shown in Figure 5 is the result obtained with the ED model as explained in Appendix § 9. Just away from the bifurcation point the ED approach yields results very different from the two others, indicating that cross section shapes quickly become non-elliptical.

Figure 5. Rescaled angular velocity Ω\Omega vs. rescaled angular momentum Λ\Lambda for the 3He1500{}^{3}\mathrm{He}_{1500} cylinder in the ED, classical and DFT approaches. Black triangles, circular DFT configurations; red circles, deformed DFT configurations; blue asterisks, classical calculations.27 The DFT configurations to the right of the vertical arrow are two-lobed. The lines are cubic splines of the calculated points.

4^{4}He cylinders

Table II collects the DFT results obtained for 4^{4}He cylinders. Since a superfluid system cannot rotate around a symmetry axis, the cross section of rotating (Λ≠0\Lambda\ne0) vortex-free 4^{4}He cylinders must necessarily be non-circular. The irrotational moment of inertia, defined as Iirr=⟨Lz⟩/ωI_{irr} = \langle L_{z}\rangle/\omega, drops to zero as Λ→0\Lambda\to0. We have plotted IirrI_{irr} in Figure 6 in units of the rigid-body moment of inertia IRBI_{RB}, Eq. (7). It can be seen that IirrI_{irr} approaches IRBI_{RB} at large angular momenta, being rather different even for large deformations. For the sake of comparison, we also display the result of the ED model, that works surprisingly well even for Λ\Lambda values for which the configuration is no longer elliptic-like but two-lobed. The difference between classical and superfluid moments of inertia, also appearing in 4He^{4}\mathrm{He} droplets,16 is a signature of their different response to rotations.

Figure 6. DFT irrotational moment of inertia IirrI_{\mathrm{irr}} in units of the rigid-body moment of inertia IRBI_{\mathrm{RB}} for 4He^{4}\mathrm{He} cylinders as a function of Λ\Lambda. The lines are cubic splines of the calculated points.

Figure 7 shows the aspect ratio as a function of the rescaled angular momentum for 4He^{4}\mathrm{He} cylinders obtained with the DFT and ED approaches. We display in Figure 8 the density of the 4He^{4}\mathrm{He} cylinder for several values of Λ\Lambda obtained with the DFT method; superposed to the densities we have plotted several circulation lines. The cross section of the cylinder becomes two-lobed at Λ∼0.5\Lambda\sim0.5. The outlines of classical shapes are superimposed to the two-dimensional DFT densities. The difference between classical and DFT densities is apparent up to

Figure 7. Aspect-ratio vs. rescaled angular momentum for the 4He^{4}\mathrm{He} cylinder in the ED and DFT approaches. The lines are cubic splines of the calculated points.

Two-dimensional densities for the $^{4}\mathrm{He}_{1500}$ cylinder

Figure 8. Two-dimensional densities for the 4He1500^{4}\mathrm{He}_{1500} cylinder in the DFT approach. From top to bottom, they correspond to Λ=0.5\Lambda= 0.5, 1, 1.5, and 2. The color bar represents the 4He^{4}\mathrm{He} density in A˚−3\mathrm{\mathring{A}}^{-3}. Several streamlines are superimposed. Also shown are the outlines of classical shapes (magenta lines).

Λ\LambdaΩ\Omegaaxa_x (Å)byb_y (Å)ARARIirr/IRBI_{\mathrm{irr}}/I_{\mathrm{RB}}RR (K/Å)
D0.0010.43503150.96145.311.0390.0015-10466.31
D0.010.43537157.12139.251.1280.0145-10465.04
D0.020.43561160.89135.581.1870.0289-10463.63
D0.040.43606166.24130.431.2750.0568-10460.80
D0.050.43627168.42128.351.3120.0705-10459.39
D0.100.43772177.09120.261.4730.1355-10452.30
D0.200.44012189.77108.941.7420.2510-10438.06
D0.300.44188200.00100.371.9930.3498-10423.77
D0.400.44295209.0693.282.2410.4344-10409.43
TL0.500.44335217.4587.162.4950.5069-10395.07
TL0.600.44304225.4481.722.7590.5691-10380.70
TL0.800.44136240.3872.213.3290.6680-10352.24
TL1.000.43536253.3864.133.9510.7502-10323.78
TL1.200.42614269.7756.734.7550.7980-10295.91
TL1.500.40932291.3046.746.2330.8558-10255.26
TL2.000.37564326.5731.6810.3100.9096-10191.55

Table 2. Configuration characteristics of a rotating 4HeN^{4}\mathrm{He}_{N} cylinder with N=1500N = 1500 atoms/Å calculated in this work within DFT. Λ\Lambda and Ω\Omega are the dimensionless angular momentum and velocity, and RR is the Routhian per unit length. ARAR is the aspect ratio, and Iirr/IRBI_{\mathrm{irr}}/I_{\mathrm{RB}} is the DFT moment of inertia in units of that of a rigid-body 4He^{4}\mathrm{He} cylinder for the same Λ\Lambda value. D: deformed elliptic-like configurations; TL: two-lobed configurations.

large Λ\Lambda values, reflecting the distinct rotational response of a normal fluid from that of a superfluid. Figure 9 shows the Ω(Λ)\Omega(\Lambda) equilibrium line for 4He^{4}\mathrm{He} obtained with the ED and DFT methods. As for 3He^{3}\mathrm{He} cylinders, the ED approximation quickly becomes inadequate. The finite value of Ω\Omega at very small values of Λ\Lambda –also found for 4He^{4}\mathrm{He} droplets17– is the equivalent of the “rotational Meissner effect” occurring when liquid helium in a rotating cylinder is cooled through the lambda point: at sufficiently slow rotational speeds the superfluid forms in a state of zero total angular momentum, causing the container to rotate faster.[46]

Figure 9. Rescaled angular velocity Ω\Omega vs. rescaled angular momentum Λ\Lambda for the 4He1500{}^{4}\mathrm{He}_{1500} cylinder in the ED and DFT approaches. The DFT configurations to the right of the vertical arrow are two-lobed. The lines are cubic splines of the calculated points.

Discussion and outlook

As for helium droplets,23 we have expectedly found that the rotating behavior of normal fluid 3He^{3}\mathrm{He} cylinders is very similar to rotating incompressible, viscous cylinders only subject to surface tension and centrifugal forces. Even for fine details such as the aspect ratio as a function of rescaled angular momentum or the Ω(Λ)\Omega(\Lambda) equilibrium line, we have found a good agreement between classical and DFT results.

Figure 4 and Figure 8 clearly illustrate how different is instead the response to rotation of the normal fluid 3He^{3}\mathrm{He} cylinder from that of superfluid 4He^{4}\mathrm{He}, especially at moderate angular momentum values, i.e., at aspect ratios not very different from one. Only when Λ\Lambda is large do the density profiles become similar. It is worth recalling that the number of droplets having large deformations is found to be very small in the experiments.10 It is also worth seeing that even for these very deformed cylinders, the moment of inertia of superfluid 4He{}^{4}\mathrm{He} cylinders is 10-20% smaller that the rigid-body value (Figure 6).

A close look at the appearance of the streamlines in Figure 4 and Figure 8 shows that while 3He{}^{3}\mathrm{He} cylinders do rotate

and streamlines are circumferences around the rotation axis, 4He{}^{4}\mathrm{He} cylinders do not; the streamlines do not correspond to a rigid rotation, but to an irrotational flow. Lets us remember that the fluid motion is a combination of translation, rotation and deformation of the fluid elements, and only when vorticity (defined as ∇×v\nabla\times\mathbf{v})[47] is nonzero, may one speak of a true rotation. Vorticity is distributed inside the cylinder in the normal phase 3He{}^{3}\mathrm{He} and it equals 2ω2\omega as for a rotating rigid body in steady rotation. Since the superfluid flow is irrotational, ∇×v=0\nabla\times\mathbf{v} = 0 for 4He{}^{4}\mathrm{He}. In this case, fluid elements translate and deform, but do not rotate. An illuminating discussion of this behavior, based on a paper by Tritton,[48] can be found in Ref. 32. The different behavior of 3He{}^{3}\mathrm{He} and vortex-free 4He{}^{4}\mathrm{He} cylinders in rotation is also apparent in the Ω(Λ)\Omega(\Lambda) equilibrium line and in the moment of inertia as a function of the angular momentum, Figure 5, Figure 6 and Figure 9.

When the superfluid 4He{}^{4}\mathrm{He} sample hosts linear vortices, the situation dramatically changes, as the vortex array tends to confer to the droplet or cylinder the appearance of a rotating rigid body.[49] [17] To exemplify this key issue, we have redone the calculation of the rotating 4He{}^{4}\mathrm{He} cylinder at Λ=0.5\Lambda= 0.5 when it hosts a large vortex array.

One single vortex along the axis of the circular cylinder has an angular momentum per unit length L=N\mathcal{L} = \mathcal{N}.[50] From the definition of Λ\Lambda, Eq. (1), it corresponds to a rather small value if N=1500\mathcal{N}=1500 atoms/Å, namely Λ=0.0898\Lambda= 0.0898. We have imprinted a nine vortex array to the cylinder by using the wave function18

Ψ0(r)=ρ01/2(r)∏j=1nv(x−xj)+i(y−yj)(x−xj)2+(y−yj)2(17)\Psi_{0}(\mathbf{r}) = \rho_{0}^{1/2}(\mathbf{r}) \prod_{j=1}^{n_v} \frac{(x-x_j)+i(y-y_j)}{\sqrt{(x-x_j)^2+(y-y_j)^2}} \tag*{(17)}

with nv=9n_v = 9, where (xj,yj)(x_j,y_j) is the initial position of the jj-vortex core. We have started from a deformed cylinder and have chosen an initial vortex array with a centered vortex and eight vortices around it at the same distance dd, which is the lowest energy configuration in the classical case.[51] During the iterative solution of Eq. (11) both the vortex core structure and positions, and the shape of the cylinder may change to provide at convergence the lowest Routhian configuration.

The effect caused by the presence of the vortex array on the morphology of the free-standing cylinder can be appreciated in Figure 10: the very deformed vortex-free cylinder, with AR=2.50AR = 2.50 (see Table II), has become circular (AR=1.001AR = 1.001), coinciding with the classical result. For smaller nvn_v values the cylinder may still be deformed, but not as much as the vortex-free cylinder. For instance, when nv=6n_v = 6, AR=1.25AR = 1.25. In this case, vortices and capillary waves coexist.6,18 We have found that for the Λ=0.5\Lambda= 0.5 value used here, the nv=9n_v = 9 configuration is more stable than the vortex-free one.

Two-dimensional density for the ${}^{4}\mathrm{He}_{1500}$ cylinder hosting nine vortex lines

Figure 10. Two-dimensional density for the 4He1500{}^{4}\mathrm{He}_{1500} cylinder hosting nine vortex lines at Λ=0.5\Lambda= 0.5 in the DFT approach. Several streamlines are superimposed. Also shown is the outline of classical shape (magenta line).

It is also worth noticing that for a nvn_v vortex array in a rotating cylinder of radius RR, the total angular momentum can be written as[52]

L=N∑j=1nv[1−(djR)2](18)\mathcal{L} = \mathcal{N} \sum_{j=1}^{n_v} \left[1-\left(\frac{d_j}{R}\right)^2\right] \tag*{(18)}

where djd_j is the distance of the jj-vortex to the symmetry axis, which in our case reduces to L=N+8N[1−(d/R)2]\mathcal{L}=\mathcal{N}+8\mathcal{N}[1-(d/R)^2]. This expression yields d=96.8d=96.8 Å for R=147.87R=147.87 Å and Λ=0.5\Lambda=0.5, in perfect agreement with the averaged DFT result.

All configurations obtained in this work, in particular those displayed in Figure 4 and Figure 8, are stationary in the co-rotating frame –the framework that rotates with angular velocity ω\omega with respect to the laboratory frame. Consequently, they would be seen from the laboratory as if they were rotating like a rigid body with the angular frequency ω\omega imposed to obtain them.[53] The 3He{}^{3}\mathrm{He} cylinder would undergo a true rotation, but this rotation would only be apparent for the 4He{}^{4}\mathrm{He} cylinder. Examples of apparent rotations in the case of 4He{}^{4}\mathrm{He} droplets, obtained within time-dependent DFT, can be found in Refs. 18 and 44.

Ongoing experiments on mixed helium droplets,25 which exhibit a core-shell structure with a crust made of 3He{}^{3}\mathrm{He} atoms in the normal state and a superfluid core mostly made of 4He{}^{4}\mathrm{He} atoms, and calculations on mixed droplets made of immiscible viscous fluids27 call for extending the DFT calculations carried out for mixed helium droplets23 to larger sizes, also relaxing the constraint that 3He{}^{3}\mathrm{He} and 4He{}^{4}\mathrm{He} moieties are concentric. When the 4He{}^{4}\mathrm{He} core displaces with respect to the center of mass of the droplet, the moment of inertia increases from that of centered drops, influencing how angular momentum is stored in the mixed droplet. In particular, it might affect quantum vortex nucleation in the 4He{}^{4}\mathrm{He} core, which could be hindered. The cross section of deformable cylinders is a reasonable representation of the density of a large rotating helium droplet on the plane of symmetry perpendicular to the rotation axis.6 The use of cylindrical geometry would allow the extension of DFT calculations to helium drops of larger cross section that would otherwise be computationally prohibitive.

Acknowledgments

This work has been performed under Grant No. PID2020-114626GB-I00 from the MCIN/AEI/10.13039/501100011033 and benefitted from COST Action CA21101 “Confined molecular systems: form a new generation of materials to the stars” (COSY) supported by COST (European Cooperation in Science and Technology). J. M. E. acknowledges support from the Spanish Research Agency MCIN/AEI/10.13039/501100011033 through the Severo Ochoa Centres of Excellence programme (grant SEV-2017-0706).

Rotating 3He{}^{3}\mathrm{He} cylinders held together by surface tension: the general case

In this Appendix we outline how dimensionless angular momentum Λ\Lambda and dimensionless angular velocity Ω\Omega can be introduced in the case of an incompressible cylinder of length ℓ\ell and radius RR, modeled by viscous cylinders subject to surface tension and centrifugal forces alone. To connect with the 2D DFT results, the length ℓ\ell will be taken as infinite, and eventually all extensive quantities will be referred to per unit length. We closely follow the procedure by Brown and Scriven in the case of droplets.11

In cylindrical coordinates (r,ϕ,z)(r,\phi,z), the radial vector to the surface is described by r=Rf(ϕ)r^\mathbf{r}=R f(\phi)\hat{\mathbf{r}}, where r^\hat{\mathbf{r}} is the unit vector in the radial direction and ϕ\phi is the azimuthal angle. This representation handles circular, elliptic-like and multi-lobed cylinders, with the limitation that rr must not intersect the surface of the cylinder more than once.

If the cylinder rotates around its axis (zz-axis) at angular velocity ω\omega, the energy per unit length is given by

E=γLc+12Iω2,(19)E=\gamma L_c+\frac{1}{2}I\omega^2, \tag*{(19)}

where γ\gamma is the surface tension, LcL_c is the perimeter of the cross section of the cylinder

Lc=2R∫0πdϕf2(ϕ)+(∂f∂ϕ)2,(20)L_c=2R\int_{0}^{\pi}d\phi\sqrt{f^2(\phi)+\left(\frac{\partial f}{\partial\phi}\right)^2}, \tag*{(20)}

and II is the moment of inertia per unit length

I=12mρ0R4∫0πdϕ f4(ϕ)=mρ0R4I(21)I=\frac{1}{2}m\rho_0R^4\int_{0}^{\pi}d\phi\,f^4(\phi)=m\rho_0R^4\mathcal{I} \tag*{(21)}

where I\mathcal{I} is the dimensionless moment of inertia per unit length. Writing the energy per unit length in units of 2γR2\gamma R, we have

E2γR=∫0πdϕ{f2(ϕ)+(∂f∂ϕ)2+mρ0ω2R38γf4(ϕ)}(22)\frac{E}{2\gamma R}=\int_{0}^{\pi}d\phi\left\{\sqrt{f^2(\phi)+\left(\frac{\partial f}{\partial\phi}\right)^2}+\frac{m\rho_0\omega^2R^3}{8\gamma}f^4(\phi)\right\} \tag*{(22)}

The ratio

Σ≡Ω2=mρ0ω2R38γ(23)\Sigma\equiv\Omega^2=\frac{m\rho_0\omega^2R^3}{8\gamma} \tag*{(23)}

is called rotational Bond number,[33, 54] [11] and is the dimensionless measure of the square of angular velocity Ω\Omega. A dimensionless angular momentum Λ\Lambda is introduced such that Λ=IΩ\Lambda=\mathcal{I}\Omega. This yields Eqs. (1) in the main text. Eq. (22) shows that within this model the solution is universal and can be obtained once for all rotating cylinders.

We want to comment that our definition of Ω\Omega coincides with that of Ref. 33; unfortunately, the definition of Λ\Lambda is not given in that reference.

Rotating 3He^{3}\mathrm{He} cylinders held together by surface tension: elliptic deformations

It is illustrative to address the classical rotating cylinder when deformations are restricted to be elliptic, as it is nearly analytical and it is expected to be a fair approximation to describe the circular to deformed bifurcation. Proceeding as in previous Appendix A, the surface energy per unit length of the cylinder is written as Es=γLcE_{\mathrm{s}}=\gamma L_{\mathrm{c}}, where

Lc=4a∫0π/2dϕ1−e2sin⁡2ϕ=4aE(e)(24)L_{\mathrm{c}}=4a\int_{0}^{\pi/2}d\phi\sqrt{1-e^{2}\sin^{2}\phi}=4a\mathbf{E}(e) \tag*{(24)}

is the perimeter of the ellipse

x2a2+y2b2=1(25)\frac{x^{2}}{a^{2}}+\frac{y^{2}}{b^{2}}=1 \tag*{(25)}

with eccentricity e=a2−b2/ae=\sqrt{a^{2}-b^{2}}/a (we take a≥ba\ge b). If the fluid is incompressible, πab=πR2\pi ab=\pi R^{2}. In Eq. (24), E(e)\mathbf{E}(e) is the complete elliptic integral of the second kind[55]

E(e)=∫0π/2dϕ1−e2sin⁡2ϕ(26)\mathbf{E}(e)=\int_{0}^{\pi/2}d\phi\sqrt{1-e^{2}\sin^{2}\phi} \tag*{(26)}

Defining ξ=a/R=(1−e2)−1/4\xi=a/R=(1-e^{2})^{-1/4}, where RR is the radius of the cylinder at rest, the moment of inertia per unit length can be expressed as

I=π4mρ0R4ξ4+1ξ2(27)I=\frac{\pi}{4}m\rho_{0}R^{4}\frac{\xi^{4}+1}{\xi^{2}} \tag*{(27)}

The energy per unit length in units of 8γR8\gamma R is

E8γR=12E(e)+2πΛ2ξ2ξ4+1(28)\frac{E}{8\gamma R}=\frac{1}{2}\mathbf{E}(e)+\frac{2}{\pi}\Lambda^{2}\frac{\xi^{2}}{\xi^{4}+1} \tag*{(28)}

which for the circular cylinder reduces to

E8γR=π4+1πΛ2(29)\frac{E}{8\gamma R}=\frac{\pi}{4}+\frac{1}{\pi}\Lambda^{2} \tag*{(29)}

Determining the equilibrium configuration for a given Λ\Lambda amounts to solving for ee (or ξ\xi) the algebraic equation dE/dξ=0d\mathcal{E}/d\xi=0:

E(e)+2ξ4−1[E(e)−K(e)]+8πΛ2ξ(1−ξ4)(ξ4+1)2=0(30)\mathbf{E}(e)+\frac{2}{\xi^{4}-1}\left[\mathbf{E}(e)-\mathbf{K}(e)\right]+\frac{8}{\pi}\Lambda^{2}\frac{\xi(1-\xi^{4})}{(\xi^{4}+1)^{2}}=0 \tag*{(30)}

where K(e)\mathbf{K}(e) is the complete elliptic integral of the first kind[55]

K(e)=∫0π/2dϕ11−e2sin⁡2ϕ(31)\mathbf{K}(e)=\int_{0}^{\pi/2}d\phi\frac{1}{\sqrt{1-e^{2}\sin^{2}\phi}} \tag*{(31)}

The determination of the equilibrium configuration is facilitated by the existence of accurate easy-to-use approximations for K(e)\mathbf{K}(e) and E(e)\mathbf{E}(e).[56] The dimensionless angular velocity

velocity is obtained from the ξ\xi value of the equilibrium configuration at the given Λ\Lambda as

Ω=4πξ2ξ4+1Λ(32)\Omega=\frac{4}{\pi}\frac{\xi^{2}}{\xi^{4}+1}\Lambda \tag*{(32)}

which reduces to Ω=2Λ/π\Omega=2\Lambda/\pi for the circular cylinder.

We have found that the circular-to-elliptical shape transition occurs at Λ=0.966\Lambda=0.966, i.e., at (Λ,Ω)=(0.966,0.612)(\Lambda,\Omega)=(0.966,0.612). Notice that Σ\Sigma at the bifurcation point is Σ=3/8\Sigma=3/8, 33 which yields Ω=3/8=0.612\Omega=\sqrt{3/8}=0.612. At bifurcation, Ω=2Λ/π\Omega=2\Lambda/\pi and one has $\Lambda=0.966 instead of the value close to 2 shown in Fig. 4a of Ref. 33 (see also Ref. 27). For this reason, we have inferred that the definition of Λ\Lambda in that reference likely is a factor of two larger than ours. As shown in Figure 5, the elliptic deformations model is unrealistic for Λ≳1.1\Lambda\gtrsim1.1 and misses the appearance of two-lobed configurations. We conclude that deformations after bifurcation quickly become complex and representing the cross section of the deformed cylinder by an ellipse is a rough approximation.

Rotating 4He^{4}\mathrm{He} cylinders held together by surface tension: elliptic deformations

It is also illustrative to consider the case of a vortex-free superfluid 4He^{4}\mathrm{He} elliptic cylinder in which angular momentum is stored only in capillary waves. The flow is irrotational and its velocity derives from a velocity potential χ(x,y)=αxy\chi(x,y)=\alpha xy, which yields[44, 50, 57]

v=∇χ(x,y)=ωa2−b2a2+b2(y,x,0)(33)\mathbf{v}=\nabla\chi(x,y)=\omega\frac{a^{2}-b^{2}}{a^{2}+b^{2}}(y,x,0) \tag*{(33)}

The zz-component of

mρ0∫dx dy r×v(34)m\rho_{0}\int dx\,dy\,\mathbf{r}\times\mathbf{v} \tag*{(34)}

is the angular momentum per unit length

L=π4mρ0(a2−b2)2a2+b2abω=Iirrω(35)\mathcal{L}=\frac{\pi}{4}m\rho_{0}\frac{(a^{2}-b^{2})^{2}}{a^{2}+b^{2}}ab\omega=I_{\mathrm{irr}}\omega \tag*{(35)}

where IirrI_{\mathrm{irr}} is the irrotational moment of inertia per unit length. Writing it in terms of RR and ξ\xi we have

Iirr=π4mρ0R4(ξ4−1)2ξ2(ξ4+1)(36)I_{\mathrm{irr}}=\frac{\pi}{4}m\rho_{0}R^{4}\frac{(\xi^{4}-1)^{2}}{\xi^{2}(\xi^{4}+1)} \tag*{(36)}

Notice that the ratio between irrotational (Eq. (36)) and rotational, rigid-body (Eq. (27)) moments of inertia is

IirrIRB=(ξ4−1ξ4+1)2(37)\frac{I_{\mathrm{irr}}}{I_{\mathrm{RB}}}=\left(\frac{\xi^{4}-1}{\xi^{4}+1}\right)^{2} \tag*{(37)}

which is zero for a circular cylinder (ξ=1\xi=1). The energy per unit length in units of 8γR8\gamma R is

E8γR=12ξE(e)+2πΛ2ξ2(ξ4+1)(ξ4−1)2(38)\frac{E}{8\gamma R}=\frac{1}{2}\xi\mathbf{E}(e)+\frac{2}{\pi}\Lambda^{2}\frac{\xi^{2}(\xi^{4}+1)}{(\xi^{4}-1)^{2}} \tag*{(38)}

As for the rotational 3He{}^{3}\mathrm{He} fluid, determining the equilibrium configuration for a given Λ\Lambda amounts to solving for ee (or ξ\xi) the algebraic equation dE/dξ=0\mathrm{d}E/\mathrm{d}\xi=0:

E(e)+2ξ4−1[E(e)−K(e)]−8πΛ2ξ(ξ4−1)3[ξ8+6ξ4+1]=0(39)E(e)+\frac{2}{\xi^{4}-1}\left[E(e)-K(e)\right]-\frac{8}{\pi}\Lambda^{2}\frac{\xi}{\left(\xi^{4}-1\right)^{3}}\left[\xi^{8}+6\xi^{4}+1\right]=0 \tag*{(39)}

The dimensionless angular velocity Ω\Omega is obtained from the ξ\xi value of the equilibrium configuration at the given Λ\Lambda as

Ω=4πξ2(ξ4+1)(ξ4−1)2Λ(40)\Omega=\frac{4}{\pi}\frac{\xi^{2}\left(\xi^{4}+1\right)}{\left(\xi^{4}-1\right)^{2}}\Lambda \tag*{(40)}

References

  1. [33]R. E. Benner Jr., O. A. Basaran, and L. E. Scriven, Proc. R. Soc. Lond. A 433, 81 (1991).
  2. [34]S. Stringari and J. Treiner, J. Chem. Phys. 87, 5021 (1987).
  3. [35]B. Grammaticos, Phys. Rev. C 17, 144 (1978).
  4. [36]D. Mateo, M. Pi, J. Navarro, and J. P. Toennies, J. Chem. Phys. 138, 044321 (2013).
  5. [38]M. A. Walkley, P. H. Gaskell, P. K. Jimack, M. A. Kelmanson, and J. L. Summers, J. of Sci. Comp. 24, 147 (2005).
  6. [39]COMSOL Multiphysics® v. 6.0. www.comsol.com. COMSOL AB, Stockholm, Sweden.
  7. [40]M. Pi, F. Ancilotto, F. Coppens, N. Halberstadt, A. Hernando, A. Leal, D. Mateo, R. Mayol, and M. Barranco, 4He-DTF BCN-TLS: A Computer Package for Simulating Structural Properties and Dynamics of Doped Liquid Helium-4 Systems. https://github.com/bcntls2016/
  8. [41]M. Frigo and S. G. Johnson, ‘The Design and Implementation of FFTW3’, Proceedings of the IEEE 93(2), 216 (2005).DOI
  9. [42]A. Leal, D. Mateo, R. Mayol, and M. Pi, Zero temperature DFT and TDDFT for 4He: A short guide for practitioners. https://github.com/bcntls2016/DFT-Guide/blob/master/dft-guide
  10. [43]F. Ancilotto, M. Barranco, F. Caupin, R. Mayol, and M. Pi, Phys. Rev. B 72, 142522 (2005).
  11. [44]F. Coppens, F. Ancilotto, M. Barranco, N. Halberstadt, and M. Pi, Phys. Chem. Chem. Phys. 19, 24805 (2017).
  12. [45]F. Möller, J. R. Nix, and W. J. Swiatecki, Nucl. Phys. A469, 1 (1987).
  13. [46]G. B. Hess and W. M. Fairbank, Phys. Rev. Lett. 19, 216 (1967).
  14. [47]E. Guyon, J.-P. Hulin, L. Petit, and C. D. Mitescu, Physical Hydrodynamics, 2nd. ed. Oxford University Press, Oxford, UK. (2015).
  15. [48]D. J. Tritton, Am. J. Phys. 50, 421 (1982).
  16. [49]D. V. Osborne, Proc. Phys. Soc. A 63, 909 (1950).
  17. [50]L. Pitaevskii and S. Stringari, Bose-Einstein Condensation and Superfluidity, International Series of Monographs on Physics vol. 164 Oxford University Press, U.K. (2016).
  18. [51]L. J. Campbell and R. M. Ziff, Phys. Rev. B 20, 1886 (1979).
  19. [52]G. B. Hess, Phys. Rev. 161, 189 (1967).
  20. [53]G. M. Seidel and H. J. Maris, Physica B 194-196, 577 (1994).
  21. [54]S. Chandrasekhar, Proc. R. Soc. London, Ser. A, 286, 1 (1965).
  22. [55]I. S. Gradshteyn and I. M. Ryzhik, Table of Integrals, Series, and Products, 7th. edition (Academic Press, Oxford, 2007).
  23. [56]M. Abramowitz and I. A. Stegun, Handbook of Mathematical Functions (Dover Publications, New York, 1965).
  24. [57]A. Bohr and B. R. Mottelson, Nuclear Structure, Vol II, (W.A. Benjamin, Reading, Massachusetts, 1975).

Paper details

vlnc:W_mvdettgb
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents