WorksPhysics and Astronomy
Dipolar boson stars as static two-body systems: an effective-one-body description
Abstract
Dipolar boson stars consist of two scalar-field lumps held in static equilibrium by the balance between gravitational attraction and scalar repulsion. The repulsion stems from a phase difference between the harmonically varying complex scalar field sourcing each lump. We construct sequences of these configurations numerically and describe them analytically as bound states of two boson stars within the effective-one-body (EOB) formalism. We map the EOB potential previously derived for the scattering of two boson stars onto an energy-dependent Schwarzschild-like radial potential. We find that the EOB-based analytical prediction for the binding energy of the system agrees remarkably well with the numerical values. The analytical prediction for the critical gravitational coupling beyond which no static equilibrium exists is also consistent with the numerical results.
Introduction
A century after its formulation, General Relativity (GR) continues to withstand every experimental test to which it has been subjected, particularly in the strong-field, dynamical regime probed by gravitational-wave astronomy. Since the first detection of a binary black hole merger in 2015 [1], the LIGO-Virgo-KAGRA network has accumulated several hundred confident gravitational-wave events, most recently compiled in the fifth Gravitational-Wave Transient Catalog (GWTC-5.0) [2], bringing the total to 390 detections.
Most gravitational-wave signals detected so far are consistent with the coalescence of binary black holes. In particular, the loudest signal observed to date, GW250114, enabled for the first time a multi-mode measurement of the ringdown of the remnant object, thereby providing a very stringent confirmation of the GR-predicted structure of black holes [3]. The other events are consistent with the GR-predictions for the merger of binary neutron stars or neutron star-black hole systems. Nevertheless, the possibility that some of these signals instead originate from the coalescence of horizonless exotic compact objects remains open [4, 5]. Scalar boson stars are among the most tractable examples of such objects, as they arise as regular, horizonless, self-gravitating solutions of the Einstein-Klein-Gordon equations [6, 7] (see Refs. [8, 9] for reviews). Recent studies point to a significant degeneracy between signals from boson-star and black-hole binaries within the sensitivity of current detectors [10, 11, 12] (see also Refs. [13, 14], which interpret several gravitational-wave events as vector-boson-star mergers). Boson stars have also attracted increasing attention in other contexts, such as dark matter searches [8, 15], structure formation [16, 17], and black hole mimickers [18, 19, 20, 21].
The simplest boson stars are static, spherically symmetric, self-gravitating lumps of scalar-field energy sourced by a harmonically varying complex scalar field . They possess an established formation mechanism [22, 23] and satisfy the criteria for dynamical stability over part of their domain of existence [24, 25, 26, 27, 28, 29]. Besides spherically symmetric boson stars, there also exist angular-momentum-carrying (rotating) axially symmetric boson stars [30, 31, 32] and, more surprisingly, dipolar boson stars, i.e. axisymmetric, static systems consisting of two separate lumps of scalar-field energy density held in static equilibrium. Dipolar boson stars were first described in the pioneering work of Yoshida and Eriguchi [33] (and even earlier, in the Newtonian approximation, by Schupp and van der Bij [34]). They can be interpreted as two “monopolar” boson stars in equilibrium, with their gravitational attraction balanced by a scalar repulsion arising from a relative phase difference of [35, 36] between the scalar field above and below the equatorial plane separating the two lumps. Remarkably, when self-interactions are included in the scalar field potential, the dipolar boson stars exhibit similar stability property as the spherically symmetric stars, with in particular, a part of the parameter space where they can be dynamically stable [37].
The construction of dipolar boson stars is relatively straightforward from the numerical point of view: the relative phase difference of is imposed by requiring the real (time-independent) scalar-field amplitude to be antisymmetric with respect to the equatorial plane. The solutions can then be obtained using standard numerical techniques for elliptic field equations. However, a consistent analytical description of the interaction between the two scalar lumps is still lacking in the literature. Reference [36] considered a heuristic analytical model, combining a Newtonian potential for the gravitational attraction with a Yukawa term accounting for the scalar repulsion. However, neither the range nor the strength of the scalar repulsion needed to balance the gravitational attraction were derived from first principles in Ref. [36]; they were instead fitted to numerical data. In this work, we instead propose a more elaborate analytical description of the competing interactions using two first-principle ingredients: (i) the notion of scalar charge (distinct from the Noether charge ) sourcing the scalar field; and (ii) the effective-one-body (EOB) formalism [38, 39]. A similar approach has recently been applied to the gravitational scattering of boson stars [40], showing good agreement with numerical relativity simulations and paving the way toward analytic waveform templates of exotic compact object binaries. Since dipolar boson stars are static, the present work provides, for the first time, an application of the EOB formalism to describe a static two-body interaction.
The rest of the paper is organized as follows. In Sec. II, we introduce the (solitonic) boson star model and its global charges. In Sec. III, we present our numerical approach to solving the field equations, together with the appropriate ansätze and boundary conditions; we also present in this section the numerical solutions describing isolated and dipolar boson stars, along with their physical observables. The analytical model describing the static two-body interaction, based on the EOB approach, is presented in Sec. IV, while the comparison with the numerical results is given in Sec. V. Finally, our conclusions are presented in Sec. VI.
Throughout the paper, we use the metric signature and units in which . We do not set to 1, as we will vary the strength of gravity relative to the scalar self-interactions through the dimensionless parameter , see below.
The model
We consider the theory of a complex scalar field minimally coupled to Einstein’s gravity. It is described by the following action
where is the Ricci scalar of the spacetime metric , is Newton’s constant, and is the scalar field potential. In this work, we employ the so-called solitonic potential [41]
which adds to the mass term an attractive quartic and a repulsive sextic self-interaction. Here is the scalar field mass, and is the location of the nontrivial zero of the potential characterizing the self-interactions.
The corresponding Einstein-Klein-Gordon equations are obtained by varying the action with respect to the metric and scalar field
where is the Ricci tensor and is the stress-energy tensor of the scalar field which reads
The model (2.1) is invariant under the global U(1) transformation , with a constant . This symmetry is associated with a conserved current, with . Integrating over a spacelike hypersurface of its timelike component gives the conserved Noether charge
where is the future-directed unit normal vector to . At the microscopic level, this quantity counts the number of scalar particles in the field configuration.
We are interested in static geometrical configurations where the metric admits a timelike Killing vector (in adapted coordinates). We consider boson star solutions that are spatially localized and have finite mass, hence, spacetime is asymptotically flat. The total mass is given by the Tolman-Komar volume integral [42],
A boson star configuration is parametrized by two dimensionless parameters which can be taken to be,
Numerically, we work with units where and , so that and . For simplicity, we shall henceforth often drop the hat notation.
Numerical construction
In this section, we describe the numerical construction of the boson star solutions. We employ the following metric ansatz describing a static and axially-symmetric spacetime
The three functions , , and depend only on the quasi-isotropic radial coordinate and the polar angle . For the complex scalar field, we adopt the harmonic ansatz
where is the (real) scalar-field amplitude and is the scalar field internal frequency. Although the scalar field itself depends explicitly on time, this harmonic dependence leaves the stress-energy tensor in Eq. (5) time-independent. Such harmonic time dependence is a characteristic feature of boson stars and allows non-trivial, localized configurations to exist by circumventing Derrick’s obstruction [43, 44] to static solitons.
Substituting the line element (9) and scalar field (10) into the Einstein–Klein–Gordon equations (3) and (4) yields a coupled system of four partial differential equations (PDEs) for the bivariate functions , , , and . This system is elliptic, and is solved numerically as a boundary-value problem, with appropriate boundary conditions imposed to ensure asymptotic flatness and regularity.
We are interested in two classes of solutions:
Isolated boson stars: these are spherically symmetric self-gravitating scalar-field lumps. We restrict our attention to the ground state, for which the scalar field has no radial nodes. They can be obtained by setting in Eq. (9), and requiring , , and to depend only on the radial coordinate (which then becomes exactly isotropic). The appropriate boundary conditions in this case are
Dipolar boson stars: these consist of two identical lumps of scalar-field energy density separated along a symmetry axis. The two lumps are held in static equilibrium by a balance between (long-range) gravitational attraction and (short-range) scalar repulsion [33, 36]. They are obtained by requiring the scalar-field amplitude to be antisymmetric with respect to the equatorial plane, . Restricting the polar variable to owing to this equatorial symmetry, the boundary conditions read
In our numerical approach, we compactify the semi-infinite interval using a new radial coordinate , which allows us to integrate the field equations up to infinity without relying on a cut-off radius. For isolated boson stars, the computational domain then reduces to the finite segment , while for dipolar boson stars the field equations are solved on the rectangle .
We solve the field equations with the finite-element solver FreeFem [45]. This solver operates on the weak form of the PDEs, obtained by recasting them as integral equations. The unknown functions are expanded over elementary basis functions associated with a chosen discretization of the computational domain. The resulting discrete problem is a system of nonlinear algebraic equations, which we solve using a Newton-Raphson algorithm. We estimate the numerical accuracy of the solutions using a relativistic virial identity (see Eq. (7.39) of Ref. [46]). The solutions constructed in this work typically reach an accuracy of for isolated boson stars and for dipolar boson stars. Further details on the application of this solver to strong-gravity problems can be found in Ref. [47].
In the code, numerical solutions are specified by two input parameters: the gravitational coupling (alias ) and the scalar-field frequency (alias ). The Noether charge (alias ) is therefore not an input parameter but rather an output. For the ansatz (9)–(10), is obtained by evaluating the on-shell integral
Nevertheless, we are able to construct solutions for a given (instead of a given ) by iteratively adjusting with a quasi-Newton method until the desired value of is reached.
This control over allows us to compare isolated and dipolar boson stars at fixed Noether charge (in other words, at fixed particle number): namely, we compare isolated boson stars of Noether charge to dipolar boson stars of total Noether charge . The latter are then viewed as bound configurations of two identical boson stars, each carrying a charge , held in static equilibrium. In this picture, the difference between the mass of the dipolar configuration and twice the mass of the isolated star measures the gravitational binding energy of the system, which will be our primary physical variable.
In Figure 1, we compare the scalar profile of an isolated boson star with to that of a dipolar boson star with . The profiles are shown along the -axis, with , for two values of the gravitational coupling . In the weak-gravity regime, , the two scalar lumps in the dipolar configuration are sufficiently far apart that the scalar profile in the upper hemisphere () closely matches that of the isolated boson star. The scalar interaction between the two lumps exists, preventing them from collapsing, but is weak: the dipole profile can be well approximated by a simple superposition of two isolated star profiles, , where denotes the location of the maximum of along the -axis. By contrast, for , the two lumps are quite close to each other and overlap significantly, so that the exponential tail of the isolated boson star profile no longer provides a good approximation in the region between them. We refer to this regime as strong gravity.

Figure 1. Comparison (in units ) of the scalar profiles along the -axis for an isolated boson star with Noether charge (green curves) and a dipolar boson star with total Noether charge (purple curves). Solid and dashed lines correspond to (weak gravity) and (strong gravity), respectively. The isolated boson star profiles are shifted along the -axis so that their maximum coincides with that of the corresponding dipolar configuration (on the axis).
| \multicolumn{6}{c}{Isolated BS} | \multicolumn{3}{c}{Dipolar BS} | ||||||||||
| 40 | 0.8510 | 40.80 | 0.0068 | 2.638 | 0.8476 | 81.48 | 13.30 | ||||
| 60 | 0.7443 | 56.59 | 0.0105 | 5.485 | 0.7407 | 112.9 | 11.71 | ||||
| 80 | 0.6880 | 70.87 | 0.0132 | 8.799 | 0.6840 | 141.3 | 11.47 | ||||
| 40 | 0.6710 | 36.73 | 0.0825 | 3.077 | 646.2 | 0.6232 | 71.47 | 6.682 | |||
| 60 | 0.5676 | 49.02 | 0.1161 | 5.710 | 125.1 | 0.4990 | 93.78 | 5.778 | |||
| 80 | 0.5025 | 59.68 | 0.1440 | 8.665 | 40.74 | 884.5 | - | - | - |
Table 1. Physical quantities characterizing the isolated and dipolar boson star configurations. The dipolar configurations reported here carry twice the Noether charge of the corresponding isolated boson star, . Note that for and , no dipolar boson star solution exists.
Both isolated and dipolar boson stars exhibit a similar domain of existence, usually represented in diagrams, see e.g. Ref. [37]. Here, instead, we show the families of solutions in diagrams in Figure 2. The solutions emerge from the trivial vacuum at (i.e. in physical units) and exist for . When the solutions are very dilute, and as decreases, (and ) rapidly increases up to a local maximum (close to for small ). The regime between this maximum and is called the Newtonian branch.
Figure 2. Noether charge (in units of ) against the scalar-field frequency (in units of ) for isolated boson stars (left) and dipolar boson stars (right), for five values of (in units of ). The horizontal black lines mark three representative values, (corresponding to for the dipolar configurations), which we use to construct sequences of solutions with varying .
increases, (and ) rapidly increases up to a local maximum (close to for small ). The regime between this maximum and is called the Newtonian branch. The Noether charge then decreases to a local minimum before increasing again up to the global maximum1. The region between the local minimum and the global maximum is called the relativistic branch, as the solutions there are typically more compact. Boson stars are dynamically stable on both the Newtonian and relativistic branches, whereas the intermediate branch is unstable [29, 37]. The families of solutions extend beyond the relativistic branch, down to a minimal frequency, whose value depends on , below which no solutions are found2.
Let us now focus on the relativistic branch of isolated boson stars and select three reference charge values, , along with the corresponding dipolar configurations with . For each of these fixed Noether charge values, we vary the gravitational coupling , thereby scanning the parameter space along the black horizontal lines shown in Figure 2. The resulting solution sequences will be used for comparison with the analytical model of § 2.2, describing the static two-body interaction. For now, we present various physical quantities of interest obtained numerically.
In addition to the mass and scalar-field frequency , we report in Table I three physical characteristics of isolated boson stars: (i) the compactness , where is the effective areal radius enclosing 99% of the total mass; (ii) the scalar charge [40] (not to be confused with the Noether charge ), extracted from the asymptotic behavior of the scalar field around an isolated boson star:
where and is Euler’s constant; and (iii) the electric- and magnetic-type tidal Love numbers , , and , obtained by solving the static perturbation equations of an isolated boson star [48, 49, 50]. For dipolar boson stars, we also report the proper separation between the two scalar lumps, defined as
The physical quantities for the sequences of solutions with are shown in Figure 3. The gravitational coupling is varied from up to a maximal value beyond which no solutions are found (marked by the dots in the plots). This maximal value depends on and differs between isolated and dipolar boson stars, though for the values of considered here it is always of order . We start from because the numerical construction of dipolar boson stars becomes increasingly challenging as . We recall that they do not admit a flat-spacetime limit [36].
Figure 3. Dependence on the gravitational coupling of various quantities characterizing isolated and dipolar boson stars, for the Noether charge values , 60, 80 (corresponding to , 120, 160). Dots mark the end of each solution sequence (no solutions are found for larger ). Top left: mass of the isolated stars, compared to half the mass of the corresponding dipoles. Top right: scalar-field frequency for the isolated and dipolar configurations. Bottom left: effective radius of the isolated boson stars, compared to the proper separation between the two lumps of the dipolar configurations. Bottom right: scalar charge of the isolated boson stars.
In the top left panel, we compare the mass of isolated boson stars with half the mass of the dipoles. One always has , reflecting the negative binding energy of the dipolar configurations. In the top right panel, we show the scalar-field frequency . Its values
for the isolated and dipolar boson stars approach each other in the small- limit. In the bottom left panel, we compare the radius of isolated boson stars with the proper separation of the dipolar configurations. Both quantities increase as decreases, but approaches a finite value for small , where isolated boson stars approach flat-spacetime -balls [51], whereas rapidly grows. This behavior of is expected: since gravitational attraction is required to balance the repulsion of the two scalar lumps, the dipole can only be maintained as if the lumps move arbitrarily far apart. In this weak-gravity regime, the two lumps therefore barely interact and behave as two essentially isolated boson stars, consistent with and approaching the isolated-boson-star values as . Finally, the bottom right panel shows the scalar charge of the isolated boson stars. It exhibits a non-monotonic behavior with respect to , but grows with increasing .
Analytical Method: An Effective-One-Body Approach
In this section, we discuss an analytical method describing the dipolar boson stars of Sec. III, viewed as two identical boson stars held in static equilibrium by the balance between long-range gravitational attraction and short-range scalar repulsion. The latter arises from the relative phase imposed by the antisymmetry of with respect to the equatorial plane. An simple effective model of this balance was proposed in Ref. [36]. Here, we improve the heuristic model of Ref. [36] in two important ways: (i) following Ref. [40] we use the concept of scalar charge of each boson star (and we will see that the relative phase implies a sign difference ); and, (ii) we use a recent, accurate version [52] of the EOB formalism to describe both the gravitational and the scalar interactions between the two constituents of a dipolar system.
EOB description
The EOB formalism maps the two-body dynamics onto the motion of an effective particle moving in an effective metric [38, 39]. However, this mapping is not unique. Different gauge choices, related by canonical transformations, change the effective metric (or the effective Hamiltonian) while leaving the physical observables invariant. Depending on the considered physical situation, a given observable may be better captured in one gauge than in another.
A general feature of the EOB formalism is to use as basic energy variable an effective energy, , given in terms of the real, total energy of the considered binary system by
where , denote the individual (rest) masses of the components of the binary. We will work here with the dimensionless effective energy
where is the usual effective mass of the binary. The (dimensionless) effective energy contains the same information as the (negative) fractional binding energy . Note that for bound binary systems, while for scattering states.
For bound orbits, the standard post-Newtonian-based EOB uses an energy-independent, Schwarzschild-like gauge [38, 39] which encodes the dynamics in three functions: two metric potentials , and (where is a Schwarzschild radial coordinate), and a Finsler potential (where is the radial momentum). For scattering (unbound) orbits, treated within post-Minkowskian gravity, it is often convenient to use an energy-dependent isotropic gauge [53] which encodes the dynamics in a single energy-dependent effective radial potential , where denotes the isotropic radial coordinate. Recently, Ref. [52] introduced an energy-dependent, Schwarzschild-like gauge, in which the dynamics is described by a single energy-dependent metric potential . The latter Lagrange-EOB (LEOB) description, allows one to combine the knowledge recently acquired from post-Minkowskian gravity, with the Schwarzschild-like structure of the post-Newtonian-based EOB which is well adapted to the description of bound systems. This is the approach we shall use here.
Reference [40] gave the analytical description of the interaction between two boson stars in the -EOB gauge including next-to-leading order (NLO) scalar and tidal contributions, for scattering configurations. In the next sub-section, we show how to transform the NLO scalar-potential results of Ref. [40] from the -EOB gauge to the energy-dependent metric potential of a corresponding LEOB gauge.
Relation between A-LEOB and w-EOB potentials
In general, two EOB descriptions can be related to each other either by identifying a common gauge-invariant observable (such as the scattering angle ), or by using a canonical transformation. However, since we are essentially dealing in both cases with a simple (energy-dependent) geodesic action , the -EOB and LEOB descriptions can be connected by a simple, energy-dependent radial-coordinate transformation, , without the need of a canonical transformation involving both coordinates and momenta. The needed radial-coordinate transformation can be easily constructed by comparing the two mass-shell conditions. In the following we use dimensionless EOB variables, notably , , , , as well as a dimensionless angular momentum of the system: (which is the same in all EOB gauges).
In the -EOB gauge, with the isotropic radial momentum , the mass-shell condition reads
The LEOB gauge uses as effective metric (in the equatorial plane)
with , so that the corresponding mass-shell condition yields
Comparing (4.3) to (4.5), we see that we can transform the LEOB mass-shell condition into a -EOB equivalent one by transforming, via an energy-dependent radial change of variables, , the Schwarzschild-like LEOB metric (4.4) into a corresponding isotropic form, namely
Indeed, the mass-shell condition corresponding to the isotropic LEOB metric (4.6) reads
Requiring the transformation to transform (4.4) into (4.6) yields the relations
Using the (Schwarzschild-gauge) condition and eliminating gives a simple ordinary differential equation (ODE) for the radial map,
In addition, given the knowledge of the radial map , equating the right-hand side of the isotropic-gauge LEOB mass-shell condition (4.7) with that of the -EOB mass-shell condition (4.3) gives the following exact link between the and potentials:
Considered jointly, the two equations (4.9) and (4.10) give an algebraic-differential system allowing one, if is known, to determine both the radial map and .
To obtain the corrections to the potential due to the scalar interactions, we solve the above equations perturbatively by setting
where and describe the known point-particle (or black hole) contributions and is a book-keeping parameter for the scalar contributions (including the boson-star gravitational tidal contributions (see § 2.3). Correspondingly, the radial map can be written as
Our problem is to transform our current (NLO) knowledge of [40] into the knowledge of the corresponding .
Inserting the expansions above into Eq. (24), we obtain at zeroth order , and at first order
Similarly, the first-order terms of Eq. (25) give
Defining
and the zeroth-order quantity
Eq. (30) can be written as
Using , which follows from the zeroth order of Eq. (24), we obtain
Inserting Eq. (34) into Eq. (29) gives a first-order linear ODE for the function ,
Given the function , the algebraic-differential system of equations (34), (35) determines the looked-for function .
The coefficients with the subscript “0” entering the latter equations are fixed by the known point-particle dynamics, while the function is known (at NLO level) from Ref. [40] (see (38) below). In view of the fractional first-post-Minkowskian knowledge of , it is enough to integrate the system (34), (35), by using only a corresponding first-post-Minkowskian accuracy in , i.e. , leading to defined by solving .
We solve (for each given value of ) Eq. (35) with the boundary condition as , since the short-range scalar interactions become negligible at large separations. We then insert the result into Eq. (34) to obtain the NLO LEOB potential corresponding to . In view of the analytical complexity of the system of equations (34), (35) we determine the function by numerical integration.
Numerical vs analytical comparison
We now compare our analytical prediction with three numerical sequences of dipolar boson star configurations with individual Noether charges , , and varying gravitational coupling . Our analytical model is an LEOB potential given by the sum
where the point-mass (or black hole) contribution is taken at the third post-Minkowskian accuracy, i.e. (denoting )
with the coefficient given in Eq. (2.69a) of [52], and where is the scalar contribution obtained from through Eqs. (35) and (34). The scalar potential for two boson stars reads [40]
Here, the relative phase of dipolar configurations induces opposite scalar charges (yielding repulsion rather than attraction) of the isolated boson stars of mass (and total rest mass ), is their scalar-field frequency, and [with ] is the dimensionless inverse range of the interaction. For each value of along a given sequence, the mass , the frequency , and the scalar charge are taken from our numerical solutions for isolated boson stars with the same Noether charges as the individual lumps in the dipole.
We recall that the mass-shell condition in LEOB gauge says that the effective energy of a binary system is related to the orbital angular momentum , and the (relative) radial momentum, , by
The right-hand side of the latter equation is naturally interpreted as the sum of a potential-energy term, , a centrifugal term , and a radial kinetic-energy term .
In the present work, we are considering binary systems with zero angular momentum, and we look for equilibrium solutions with vanishing radial kinetic energy. Such solutions clearly correspond to minimizing the potential energy contribution with respect to the radial variable . However, as our radial potential also depends on , the analytical effective energy must be self-consistently determined by bootstrapping the latter equilibrium condition, i.e. by finding solutions of
This is equivalent to finding solutions of the two equations and , together with the inequality . We solve Eq. (40) for with a root-finding algorithm. Given values of and , our analytical equilibrium condition (5.5) determines at most one solution, say .
The analytical prediction (when it exists) is then compared with the corresponding numerical value which, using Eq. (15), is given by,
where is the mass of the dipolar configuration, and is the mass of the isolated boson star carrying the same Noether charge as each of the two lumps composing the dipole. The results for Noether charges , , are shown in Figure 4 (a–Figure 4c), where the numerical values of (black solid line) are compared with the analytical predictions (red solid lines). For all three sequences, the analytical predictions agree very well (given our limited analytical accuracy) with the numerical results over the whole range of , and for the three values of we have selected. In Figure 4 (d), we show
Figure 4. (a)–(c) Comparison of the effective energy of static dipolar boson stars as a function of the gravitational coupling , for Noether charge , 60, 80 of the individual boson star constituents. The numerical results are shown as a black solid line, and the analytical results, obtained by bootstrapping the effective energy, as a red solid line. The green dashed line shows the analytical results including tidal contributions. The black dot marks the last numerical dipolar boson star configuration, and the red dot represents the turning point beyond which the analytical model predicts no static equilibrium. (d) Fractional difference in % between the numerical and analytical values (without tides) of as a function of , for , 60, 80.
the fractional difference in percent. Overall, the deviation grows with and remains below for all three sequences.
As increases along a sequence, the gravitational attraction between the two stars grows relative to their scalar repulsion. As already highlighted in Sec. III, beyond a critical value of , the scalar repulsion can no longer balance the gravitational pull, and no stable equilibrium exists, i.e., we do not find dipolar boson star solutions in this regime. In the analytical model, this corresponds to the disappearance of the minimum of the LEOB potential. As increases, one indeed finds that the minimum of becomes shallower and eventually merges with a neighboring maximum, thereby creating an inflection point and no minimum. At this critical configuration, the function has a triple zero:
For a given , the latter three equations determine a critical radius , a critical effective energy , and a critical gravitational coupling . For , the LEOB potential admits no static equilibrium, and the analytical description predicts no dipolar boson star configuration. These critical configurations are shown as red solid dots in Figure 4 (a–Figure 4c). For all three sequences, we find that the analytical critical coupling lies close to, but slightly away from the value at which the numerical sequence ends.
We also include the tidal contributions (see Eq. (8) of Ref. [40]) due to both electric-type and magnetic-type Love numbers in , in the same way as the scalar contribution, and find that their effect on is negligible. The tidal results are shown as green dashed lines in Figure 4 (a–Figure 4c). We find that the tidal effects are consistently less important for these static configurations than in the scattering of boson stars, where they were found to improve the agreement with numerical simulations at small impact parameters [40].
The effective energy (related to the binding energy of the dipole) is the only gauge invariant variable that makes sense both in our numerical approach and in the EOB approach, for the systems considered here. By contrast, the equilibrium EOB radial variable is not gauge invariant and therefore cannot be meaningfully quantitatively compared with the numerical equilibrium proper distance . Nevertheless, it is instructive to compare the two to see if they are in qualitative agreement. We found that they are in reasonable qualitative agreement. Let us give a few examples of the comparison between and along with the structure of the potential .
Figure 5 compares the potential in the two cases , (for ) by displaying not only the complete potential but also its two building blocks and , see Eq. (36). The figure explicitly shows how the attractive third-postMinkowskian Schwarzschild-like gravitational potential (blue solid line) combines with the repulsive Yukawa-like scalar potential (orange solid line) to create a local minimum in the total potential (green solid line) at (green dashed line). In the examples shown, the radius (self-consistently) minimizing the total is for and for , corresponding to the bootstrapped values and , respectively. These are quite close to their corresponding numerical values and . In order to compare the dimensionless Schwarzschild-like radial coordinates and to the corresponding numerical proper distances and , we need to recall that while , so that . In the present case, the conversion factor is and , respectively.
Therefore the equilibrium radii displayed in Figure 5 corresponds (in units of ) to and , respectively, which are reasonably close to and . In Table II we give a few more examples of the comparison between and . In view of the lack of gauge-invariance of , this comparison can only be qualitative, and we consider the level of agreement shown in Table II to be reasonable.
Figure 5. LEOB potential (green solid line) for the sequence, evaluated at the bootstrapped analytical value (without tides) of the effective energy , for (a) () and (b) (). Also shown are its two building blocks, the attractive 3PM Schwarzschild-like gravitational potential (blue solid line) and the repulsive Yukawa-like scalar potential (orange solid line). Their combination produces a local minimum of at (green dashed line), where , corresponding to the static equilibrium.
Conclusions
In this work, we studied static dipolar boson stars, interpreted as bound states of two identical boson stars held in equilibrium by the balance between long-range gravitational attraction and short-range scalar repulsion. On the numerical side, we constructed sequences of isolated and dipolar boson stars in the solitonic model, with Noether charge , , and (in units of ) for each individual star, by varying the gravitational coupling (in units of ) for solutions along the relativistic branch.
On the analytical side, we described these configura-
| 40 | 0.001 | 0.08160 | 0.994583 | 0.994641 | 13.0534 | 13.3217 |
| 40 | 0.003 | 0.23975 | 0.979366 | 0.979969 | 9.75697 | 10.2903 |
| 40 | 0.0065 | 0.49922 | 0.943195 | 0.945853 | 6.89321 | 7.80928 |
| 40 | 0.009 | 0.67002 | 0.909096 | 0.913522 | 5.43847 | 6.45993 |
| 40 | 0.011 | 0.79715 | 0.873806 | 0.878831 | 4.2972 | 5.26799 |
| 60 | 0.001 | 0.11317 | 0.99129 | 0.991354 | 11.4026 | 11.624 |
| 60 | 0.00375 | 0.40768 | 0.958162 | 0.95926 | 8.09264 | 8.75263 |
| 60 | 0.0065 | 0.67689 | 0.914328 | 0.917377 | 6.08609 | 7.11274 |
| 60 | 0.0085 | 0.85596 | 0.872908 | 0.87723 | 4.75373 | 5.97222 |
| 60 | 0.0095 | 0.93987 | 0.8465 | 0.850894 | 4.01694 | 3.28954 |
| 80 | 0.0005 | 0.07146 | 0.994861 | 0.994872 | 12.422 | 12.5517 |
| 80 | 0.0015 | 0.21082 | 0.982067 | 0.982263 | 10.2319 | 10.6061 |
| 80 | 0.0045 | 0.59998 | 0.932575 | 0.934483 | 7.21471 | 8.12184 |
| 80 | 0.0065 | 0.83469 | 0.889489 | 0.893143 | 5.68847 | 6.91947 |
| 80 | 0.0085 | 1.04846 | 0.831025 | 0.836144 | 3.97207 | 5.57342 |
Table 2. Comparison between the bootstrapped analytical and numerical values of the effective energy , and between the EOB equilibrium radius and the numerical proper separation of the two lumps, for , , . Here converts (in units of ) into (in units of ).
tions using the effective-one-body formalism. Starting from a recently derived first-post-Minkowskian accurate -EOB scalar potential [40], we derived a corresponding energy-dependent Schwarzschild-like Lagrange-EOB metric potential by solving the algebraic-differential system defined by the two equations (4.20), (4.19). This gives a description of the interaction between two boson stars via a radial potential of the additive form (5.1) involving the sum of a purely gravitational (point-mass) contribution, , and of a scalar contribution, . While the gravitational contribution is given by the simple closed-form third-post-Minkowskian expression (5.2), the analytic expression of the Yukawa-like scalar contribution defined by solving Eqs. (4.20), (4.19) would be rather complicated. In practice we resorted to numerically solving the linear ODE (4.20). Figure 5 illustrates the shape of the two building blocks of our final .
In the Lagrange-EOB description, a static dipolar configuration then corresponds to an effective particle of mass at rest at a local minimum of the radial potential . Since the potential depends on the effective energy , we determined the latter self-consistently by bootstrapping the equilibrium condition , with the properties of the isolated boson star as input from our numerical solutions. For all three sequences, our analytical predictions agree quite well with the numerical results for the dipolar boson stars over the whole range of . We also included the tidal contributions and found that their effect on is negligible. See Figure 4 (a–c) for a display of our results.
As increases, the gravitational attraction grows relative to the scalar repulsion, and the minimum of the LEOB potential becomes shallower until it merges with a neighboring maximum into an inflection point. According to the analytical model, this critical configuration, defined by a triple zero of , marks the end of the sequence of static equilibria corresponding to dipolar boson stars. The analytical prediction for this turning point lies close to the end of the numerical sequences, with a difference in () of 5.41% for , 1.01% for and 2.96% for . See Figure 4 (a–Figure 4c) where the end points of the analytical and numerical equilibrium curves are marked as dots. The overall conclusion is that the Schwarzschild-like EOB description introduced here to describe the interaction of two boson stars accurately captures not only the binding energy of equilibrium dipolar boson stars, but also the maximal coupling beyond which no static configuration exists. A natural next step would be to explore whether it can also accurately capture the interaction between two boson stars in dynamical, gravitationally bound systems, such as inspiralling binaries.
Data availability statement
All numerical data underlying this work are available from the authors upon reasonable request.
Acknowledgments
T. J. is supported by a LabEx Junior Research Chair Fellowship at ENS, Paris. T. J. and R. G. thank the hospitality and the stimulating environment of the Institut des Hautes Etudes Scientifiques (IHES). The present research was partially supported by the 2021 Balzan Prize for Gravitation: Physical and Astrophysical Aspects, awarded to T. Damour.
References
- [1]B. P. Abbott et al., “Observation of Gravitational Waves from a Binary Black Hole Merger,” Phys. Rev. Lett., vol. 116, no. 6, p. 061102, 2016.
- [2]A. G. Abac et al., “GWTC-5.0: An Introduction to Version 5.0 of the Gravitational-Wave Transient Catalog,” 5 2026.arxiv.org/abs/2605.27223
- [3]A. G. Abac et al., “GW250114: Testing Hawking’s Area Law and the Kerr Nature of Black Holes,” Phys. Rev. Lett., vol. 135, no. 11, p. 111403, 2025.
- [4]V. Cardoso and P. Pani, “Testing the nature of dark compact objects: a status report,” Living Rev. Rel., vol. 22, no. 1, p. 4, 2019.DOI
- [5]E. Maggio, P. Pani, and G. Raposo, Testing the Nature of Dark Compact Objects with Gravitational Waves, pp. 1–37. Springer Singapore, 2021.
- [6]D. J. Kaup, “Klein-Gordon Geon,” Phys. Rev., vol. 172, pp. 1331–1342, 1968.DOI
- [7]R. Ruffini and S. Bonazzola, “Systems of selfgravitating particles in general relativity and the concept of an equation of state,” Phys. Rev., vol. 187, pp. 1767–1783, 1969.DOI
- [8]S. L. Liebling and C. Palenzuela, “Dynamical boson stars,” Living Rev. Rel., vol. 26, no. 1, p. 1, 2023.
- [9]F. E. Schunck and E. W. Mielke, “General relativistic boson stars,” Class. Quant. Grav., vol. 20, pp. R301–R356, 2003.DOI
- [10]T. Evstafyeva, U. Sperhake, I. Romero-Shaw, and M. Agathos, “Gravitational-wave data analysis with high-precision numerical relativity simulations of boson star mergers,” Phys. Rev. Lett., vol. 133, no. 13, p. 131401, 2024. arXiv:2406.02715 [gr-qc].DOI
- [11]T. Evstafyeva, A. Seifert, U. Sperhake, C. J. Moore, and T. Jain, “Lessons from binary dynamics of inspiralling equal-mass boson-star mergers,” Physical Review D, vol. 114, no. 6, 2026.
- [12]S. Vangstein and C. J. Moore, “On the Interpretation of Tests of the Horizon Area Law,” 10 2026.arxiv.org/abs/2610.36162
- [13]J. C. Bustillo, N. Sanchis-Gual, A. Torres-Forné, J. A. Font, A. Vajpeyi, R. Smith, C. Herdeiro, E. Radu, and S. H. W. Leong, “GW190521 as a Merger of Proca Stars: A Potential New Vector Boson of 8.7 × 10−13 eV,” Phys. Rev. Lett., vol. 126, no. 8, p. 081101, 2021.DOI
- [14]J. Calderon Bustillo, N. Sanchis-Gual, S. H. W. Leong, K. Chandra, A. Torres-Forne, J. A. Font, C. Herdeiro, E. Radu, I. C. F. Wong, and T. G. F. Li, “Searching for vector boson-star mergers within LIGO-Virgo intermediate-mass black-hole merger candidates,” 6 2022.arxiv.org/abs/2206.02551
- [15]H. Kim, J. Park, and M. Son, “Axion dark matter from cosmic string network,” JHEP, vol. 07, p. 150, 2024.arxiv.org/abs/2402.00741
- [16]T. Vachaspati and A. Vilenkin, “Large scale structure from wiggly cosmic strings,” Phys. Rev. Lett., vol. 67, pp. 1057–1061, 1991.pubmed.ncbi.nlm.nih.gov/10045065
- [17]D. Inman and Y. Ali-Haïmoud, “Early structure formation in primordial black hole cosmologies,” Phys. Rev. D, vol. 100, no. 8, p. 083528, 2019.DOI
- [18]F. S. Guzman and J. M. Rueda-Becerril, “Spherical boson stars as black hole mimickers,” Phys. Rev. D, vol. 80, p. 084023, 2009.DOI
- [19]P. V. P. Cunha, C. Herdeiro, E. Radu, and N. Sanchis-Gual, “Exotic Compact Objects and the Fate of the Light-Ring Instability,” Phys. Rev. Lett., vol. 130, no. 6, p. 061401, 2023.DOI
- [20]N. Siemonsen, “Nonlinear Treatment of a Black Hole Mimicker Ringdown,” Phys. Rev. Lett., vol. 133, no. 3, p. 031401, 2024.DOI
- [21]G. A. Marks, S. J. Staelens, T. Evstafyeva, and U. Sperhake, “Long-Term Stable Nonlinear Evolutions of Ultracompact Black-Hole Mimickers,” Physical Review Letters, vol. 135, no. 13, 2025.DOI
- [22]E. Seidel and W.-M. Suen, “Formation of solitonic stars through gravitational cooling,” Phys. Rev. Lett., vol. 72, pp. 2516–2519, 1994. gr-qc/9309015.pubmed.ncbi.nlm.nih.gov/10055903
- [23]S. Kasuya and M. Kawasaki, “Q-ball formation through the Affleck-Dine mechanism,” Phys. Rev. D, vol. 61, no. 4, p. 041301, 2000.
- [24]M. Gleiser, “Stability of Boson Stars,” Phys. Rev. D, vol. 38, p. 2376, 1988. [Erratum: Phys.Rev.D 39, 1257 (1989)].pubmed.ncbi.nlm.nih.gov/9959398
- [25]M. Gleiser and R. Watkins, “Gravitational Stability of Scalar Matter,” Nucl. Phys. B, vol. 319, pp. 733–746, 1989.DOI
- [26]T. D. Lee and Y. Pang, “Stability of mini-boson stars,” Nuclear Physics B, vol. 315, no. 2, pp. 477–516, 1989.DOI
- [27]F. V. Kusmartsev, E. W. Mielke, and F. E. Schunck, “Gravitational stability of boson stars,” Physical Review D, vol. 43, no. 12, pp. 3895–3901, 1991.pubmed.ncbi.nlm.nih.gov/10013355
- [28]F. V. Kusmartsev and F. E. Schunck, “Analogies and differences between neutron and boson stars studied with catastrophe theory,” Physica B: Condensed Matter, vol. 178, no. 1-4, pp. 24–34, 1992.DOI
- [29]T. Tamaki and N. Sakai, “How does gravity save or kill Q-balls?,” Physical Review D, vol. 83, no. 4, p. 044027, 2011.DOI
- [30]F. E. Schunck and E. W. Mielke, “Rotating boson star as an effective mass torus in general relativity,” Phys. Lett., vol. A249, pp. 389–394, 1998.DOI
- [31]S. Yoshida and Y. Eriguchi, “Rotating boson stars in general relativity,” Phys. Rev. D, vol. 56, pp. 762–771, 1997.DOI
- [32]B. Kleihaus, J. Kunz, and M. List, “Rotating boson stars and Q-balls,” Phys. Rev. D, vol. 72, p. 064002, 2005.DOI
- [33]S. Yoshida and Y. Eriguchi, “New static axisymmetric and nonvacuum solutions in general relativity: Equilibrium solutions of boson stars,” Phys. Rev. D, vol. 55, pp. 1994–2001, 1997.DOI
- [34]B. Schupp and J. J. van der Bij, “An axially symmetric Newtonian boson star,” Phys. Lett. B, vol. 366, pp. 85–88, 1996.DOI
- [35]C. Palenzuela, I. Olabarrieta, L. Lehner, and S. L. Liebling, “Head-on collisions of boson stars,” Phys. Rev. D, vol. 75, p. 064005, 2007.DOI
- [36]P. Cunha, C. Herdeiro, E. Radu, and Y. Shnir, “Two boson stars in equilibrium,” Phys. Rev. D, vol. 106, no. 12, p. 124039, 2022.
- [37]P. Ildefonso, M. Zilhão, C. Herdeiro, E. Radu, and N. M. Santos, “Self-interacting dipolar boson stars and their dynamics,” Physical Review D, vol. 108, no. 6, p. 064011, 2023.
- [38]A. Buonanno and T. Damour, “Effective one-body approach to general relativistic two-body dynamics,” Phys. Rev. D, vol. 59, p. 084006, 1999. gr-qc/9811091.DOI
- [39]A. Buonanno and T. Damour, “Transition from inspiral to plunge in binary black hole coalescences,” Phys. Rev. D, vol. 62, p. 064015, 2000. gr-qc/0001013.DOI
- [40]T. Damour, T. Jain, and U. Sperhake, “Gravitational Scattering of Solitonic Boson Stars: Analytics vs Numerics,” Phys. Rev. Lett., vol. 137, no. 2, p. 021401, 2026.DOI
- [41]R. Friedberg, T. D. Lee, and Y. Pang, “Scalar soliton stars and black holes,” Phys. Rev. D, vol. 35, pp. 3658–3677, 1987.pubmed.ncbi.nlm.nih.gov/9957626
- [42]R. M. Wald, General Relativity. The University of Chicago Press, Chicago and London, 1984.
- [43]G. H. Derrick, “Comments on Nonlinear Wave Equations as Models for Elementary Particles,” Journal of Mathematical Physics, vol. 5, no. 9, pp. 1252–1254, 1964.DOI
- [44]S. Carloni and J. a. L. Rosa, “Derrick’s theorem in curved spacetime,” Phys. Rev. D, vol. 100, no. 2, p. 025014, 2019.DOI
- [45]F. Hecht, “New development in freeem+−,” J. Numer. Math., vol. 20, no. 3-4, pp. 251–265, 2012.
- [48]V. Cardoso, E. Franzin, A. Maselli, P. Pani, and G. Raposo, “Testing strong-field gravity with tidal Love numbers,” Phys. Rev. D, vol. 95, no. 8, p. 084014, 2017. [Addendum: Phys.Rev.D 95, 089901 (2017)].DOI
- [49]T. Damour and A. Nagar, “Relativistic tidal properties of neutron stars,” Physical Review D, vol. 80, no. 8, p. 084035, 2009.DOI
- [50]N. Sennett, T. Hinderer, J. Steinhoff, A. Buonanno, and S. Ossokine, “Distinguishing Boson Stars from Black Holes and Neutron Stars from Tidal Interactions in Inspiraling Binary Systems,” Phys. Rev. D, vol. 96, no. 2, p. 024002, 2017.DOI
- [51]S. R. Coleman, “Q-balls,” Nucl. Phys. B, vol. 262, no. 2, p. 263, 1985. [Addendum: Nucl.Phys.B 269, 744 (1986)].DOI
- [52]T. Damour, A. Nagar, A. Placidi, and P. Rettegno, “Novel Lagrange-multiplier approach to the effective-one-body dynamics of binary systems in post-Minkowskian gravity,” Phys. Rev. D, vol. 113, no. 2, p. 024042, 2026.
- [53]T. Damour and P. Rettegno, “Strong-field scattering of two black holes: Numerical relativity meets post-Minkowskian gravity,” Phys. Rev. D, vol. 107, no. 6, p. 064051, 2023.DOI



