betaFeedback

WorksMathematics

A Second-Order Parallel Neumann-Robin Splitting for the Stokes-Biot System with a Linear Time-Step Restriction

Abstract

In this paper we develop a second-order, fully decoupled, non-iterative partitioned method for the time-dependent Stokes–Biot problem on fixed domains. In previous work \cite{WangLeeCanic2026SecondOrder}, a Robin–Robin scheme with these features was introduced, and its stability and error estimates were established under the sufficient parabolic CFL-type condition Δt≲C∗h2Δt\lesssim C_*h^2. The main improvement of the new scheme is weakening the CFL-type condition to a linear CFL-type condition Δt≲C∗hΔt \lesssim C_*h. This can be achieved with a new splitting approach by replacing the poroelastic mechanical normal Robin condition by its physical Neumann-type traction condition, which results in a Neumann–Robin splitting. For fixed coefficients satisfying the stated assumptions, we prove a fully discrete energy bound under a restriction of Δt≲C∗hΔt\lesssim C_*h. The improvement over the parabolic restriction in the earlier Robin–Robin analysis follows from eliminating the interface residual that requires two inverse-trace estimates. We also establish an energy-norm error bound of order hk+Δt2h^k+Δt^2 under explicit regularity, finite element approximation, and initialization assumptions. Numerical experiments with manufactured solutions examine spatial and temporal accuracy and compare the Neumann–Robin and Robin–Robin schemes. A 3D cylindrical pressure-pulse benchmark further investigates their numerical stability behavior. The results distinguish the less restrictive sufficient stability condition established analytically from the observed stability thresholds of the two schemes.

Introduction

Fluid–poroelastic structure interaction couples free fluid motion with deformation and filtration in a saturated porous material. Such interactions arise in tissue perfusion, arterial-wall mechanics, filtration devices, and subsurface flow. A standard mathematical description combines the incompressible Stokes or Navier–Stokes equations with Biot poroelasticity [2, 3]. The interface conditions enforce conservation of normal fluid flux, accounting for both the porous skeleton motion and Darcy filtration, together with traction of balance and the Beavers–Joseph–Saffman tangential slip law. These conditions connect the fluid velocity and stress to both the skeleton motion and the pore-fluid response. Early computational work on the Navier–Stokes–Biot coupling includes the monolithic and partitioned formulations of Badia, Quaini, and Quarteroni [4]. Since then, numerical methods for Stokes–Biot problems with various formulations and finite element discretizations have been developed. We refer to [5, 6, 7, 8, 9, 10, 11] for related formulations and discretizations. The numerical treatment depends in part on the variational formulation chosen for each component. In a primal Darcy formulation, the filtration velocity is eliminated through Darcy’s law and the pore pressure is sought in an H1H^1 space. Coupled with displacement-based elasticity, this leads to a poroelastic displacement–pressure formulation, with structure velocity introduced when inertia is retained. In a dual-mixed Darcy formulation, filtration velocity and pore pressure are independent unknowns, typically in H(div⁡)H(\operatorname{div}) and L2L^2, respectively. The normal filtration flux is then a natural trace variable, and the normal-flux transmission condition is of essential type for the mixed Darcy formulation; it may be imposed weakly, for example through a Lagrange multiplier or Nitsche-type interface operators.

Several methods have been developed for the mixed setting. Bukač, Yotov, Zakerzadeh, and Zunino [5] used a mixed Darcy formulation and Nitsche interface operators to construct and analyze partitioned Stokes–Biot discretizations. Ambartsumyan, Khattatov, Yotov, and Zunino [7] imposed normal-flux continuity through a Lagrange multiplier and established stability and error estimates for mixed finite element approximations. Mixed formulations can also be applied to the mechanical variables: Li and Yotov [8] combined weakly symmetric stress–displacement–rotation elasticity with mixed Darcy flow and a velocity–pressure Stokes formulation. Caucao, Li, and Yotov [9] developed a fully mixed Stokes–Biot formulation and a multipoint stress–flux method, using interface multipliers and local elimination of stress, rotation, and filtration variables. Thus, the terms primal and mixed must be interpreted componentwise, rather than as interchangeable descriptions of the entire coupled system.

Other formulations address complementary discretization issues. Ruiz-Baier, Taffetani, Westermeyer, and Yotov [10] introduced total poroelastic pressure as an additional unknown and developed a mixed-primal Biot–Stokes formulation using Stokes-stable pairs for the fluid and mechanical variables. Their transmission conditions are incorporated without interface Lagrange multipliers. Cesmelioglu, Lee, and Rhebergen [11] proposed hybridizable discontinuous Galerkin methods with H(div⁡)H(\operatorname{div})-conforming velocity and displacement approximations, elementwise satisfaction of the compressibility equations, and a locking-free error analysis. These developments concern the spatial formulation and interface enforcement; the design of a time-splitting method requires an additional analysis of the lagged interface exchange.

The use of Robin transmission conditions in partitioned Stokes–Biot methods is closely related to developments in incompressible fluid–structure interaction. Fernández, Mullaert, and Vidrascu [12] developed explicit Robin–Neumann schemes for incompressible fluids coupled to thin-walled elastic structures, incorporating fluid–solid inertia into the interface treatment. Burman, Durst, Fernández, and Guzmán [13] established fully discrete stability and error estimates for a non-iterative Robin–Robin fluid–structure scheme, with interfacial stresses evaluated variationally. The same authors subsequently provided a unified Robin–Robin splitting analysis for parabolic–parabolic and parabolic–hyperbolic interface problems [14]. These works provide foundations for explicit interface coupling, while their models differ from Stokes–Biot interaction, where filtration and pore pressure introduce additional transmission terms.

For fluid–poroelastic interaction itself, Bukač, Yotov, and Zunino [6] developed a Lie operator-splitting method for a fluid interacting with a multilayered structure containing a thin elastic membrane and a thick poroelastic layer. The Nitsche-based method in [5] instead separates the Stokes, Darcy, and elasticity equations through time lagging and stabilization of the interface operators. Dalal, Durst, Quaini, and Yotov [15] developed a Robin–Robin splitting with an auxiliary interface variable representing the Robin data and one fluid and one Biot solve per time step, together with stability and time-discretization error analysis. Guo, Sun, Wang, Yue, and Zheng [16] proposed a fully parallelizable loosely coupled method for moving-domain Navier–Stokes–Biot interaction, using previous-time-level interface data to advance the fluid and poroelastic subproblems independently. The partition of the Biot equations, the interface unknowns, and the order in which data are exchanged differ among these approaches.

Second-order temporal accuracy introduces further requirements on the interface approximation. Oyekole and Bukač [17] developed loosely coupled methods based on BDF2 with extrapolated coupling terms and on a Crank–Nicolson/leap-frog construction. Kunwar, Lee, and Seelman [18] studied second-order time discretizations for a coupled quasi-Newtonian fluid–poroelastic system. Parrow and Bukač [19] developed a strongly coupled Robin–Robin partitioned method based on a refactorized Cauchy θ\theta-like scheme. Subsequently, they analyzed a loosely coupled Robin–Robin method with conditional stability and a suboptimal temporal error estimate of Δt\sqrt{\Delta t}, and investigated an iterative higher-order alternative exhibiting second-order convergence in numerical experiments [20].

The immediate starting point of the present work is the second-order explicit splitting of Wang, Lee, and Čanić [1]. That method uses a primal Darcy formulation, displacement-based elasticity, BDF2 time stepping, and second-order extrapolation of the interface data. The Stokes and Biot blocks are independent at each time step and can be solved concurrently. Its mechanical normal condition on the Biot side contains an auxiliary Robin term involving the normal structure velocity. This term cancels from the continuous transmission condition, but produces a second time difference of normal structure velocity when one occurrence is imposed at the new time and the other is extrapolated. The earlier fully discrete analysis controls this contribution under a parabolic restriction, Δt≲C∗h2\Delta t \lesssim C_{*}h^{2}.

In this paper, we retain the same two-block partition and second-order time discretization, but replace the Biot mechanical normal Robin condition by the physical Neumann-type condition

np⋅σp(η,ϕ)np+ϕ=0.\mathbf{n}_{p}\cdot\boldsymbol{\sigma}_{p}(\boldsymbol{\eta},\phi)\mathbf{n}_{p}+\phi=0.

Both stress and pore pressure are evaluated within the current Biot solve. Since pore pressure is already a Biot unknown, this treatment preserves the independence of the fluid and poroelastic solves. The fluid normal condition, Darcy interface condition, and tangential Robin/BJS conditions retain their Robin form. We refer to the resulting algorithm as a Neumann–Robin splitting, listing the poroelastic mechanical normal condition first. The modification concerns the normal mechanical coupling, while filtration and tangential slip remain coupled through their respective transmission conditions.

The principal analytical benefit is the removal of the extrapolated normal structure-velocity residual. In the earlier energy argument, this residual is paired with the current normal structure velocity, and estimating both traces through bulk L2L^{2} norms generates the factor associated with the parabolic restriction. In the modified scheme, each remaining explicit interface term can be estimated using at most one inverse trace, together with fluid viscous dissipation, Darcy dissipation, or tangential slip control. For fixed positive material and interface coefficients, we establish a closed homogeneous fully discrete energy estimate under the linear restriction Δt≤C∗h\Delta t\leq C_{*}h. The extension to nonhomogeneous source terms is discussed separately. Our comparison here only concerns the sufficient conditions obtained for this scheme and the specific second-order method in [1], and thus it does not imply that all Robin–Robin formulations require a parabolic restriction.

We establish unique solvability of the two independent subproblems and derive an exact BDF2 discrete energy identity for the proposed Neumann–Robin algorithm. For the homogeneous problem, we prove a fully discrete energy stability estimate under a linear mesh-dependent time-step restriction. Under stated regularity, finite element approximation, and initialization assumptions, we further establish a bulk energy-norm error estimate of order hk+Δt2h^{k}+\Delta t^{2} for the fluid velocity, structure velocity, pore pressure, and displacement. The error analysis uses a common elasticity projection for displacement and structure velocity, together with a discrete summation-by-parts argument to control the pore-pressure projection traction term without requiring normal structure-velocity dissipation. Finally, we construct a smooth polynomial manufactured solution satisfying the physical interface conditions without additional interface loads and present spatial and temporal convergence studies. These experiments assess the accuracy of the proposed splitting scheme, while the improvement in the sufficient time-step restriction is established through the theoretical stability analysis.

The paper is organized as follows. Section 2 introduces the continuous problem and Section 3 presents the Neumann–Robin algorithm. Stability is established in Section 4, and the error estimate is proved in Section 5. Section 6 discusses the improvement in comparison with the Robin–Robin splitting, and Section 7 presents spatial and temporal convergence studies using manufactured solutions, compares the Neumann-Robin and Robin-Robin splitting schemes, and investigates their numerical stability behavior in a 3D cylindrical pressure-pulse benchmark.

The continuous Stokes–Biot problem

Domains and equations

Let Ωf,Ωp⊂Rd\Omega_f,\Omega_p \subset\mathbb{R}^d, d∈{2,3}d \in\{2,3\}, be bounded Lipschitz domains with common interface Γ\Gamma. The remaining boundaries are denoted by Σf\Sigma_f and Σp\Sigma_p. Both subdomains and the interface are fixed. Their outward normals satisfy np=−nfn_p=-n_f on Γ\Gamma, and

Pv:=v−(v⋅nf)nf=v−(v⋅np)npP v := v - (v \cdot n_f)n_f = v - (v \cdot n_p)n_p

is the common tangential projector. We assume that the exterior Dirichlet portions have positive measure and provide the Korn and Poincaré inequalities used below.

The fluid velocity and pressure are (u,pf)(u,p_f), and the poroelastic displacement, velocity, and pore pressure are (η,ξ,ϕ)(\eta,\xi,\phi). With D(v)=(∇v+∇vT)/2D(v)=(\nabla v+\nabla v^{\mathsf T})/2, define

σf(u,pf)=2μfD(u)−pfI,σp(η,ϕ)=2μpD(η)+λp(∇⋅η)I−αϕI,(1)\begin{aligned} \sigma_f(u,p_f) &= 2\mu_f D(u)-p_f I,\\ \sigma_p(\eta,\phi) &= 2\mu_p D(\eta)+\lambda_p(\nabla\cdot\eta)I-\alpha\phi I, \tag*{(1)} \end{aligned}

where II is the d×dd \times d identity matrix. The governing equations are

{ρf∂tu−∇⋅σf(u,pf)=ff,in Ωf,∇⋅u=0,in Ωf,ρp∂tξ−∇⋅σp(η,ϕ)=fp,in Ωp,∂tη=ξ,in Ωp,C0∂tϕ+α∇⋅ξ−∇⋅(K∇ϕ)=gp,in Ωp,up=−K∇ϕ,in Ωp.(2)\left\{ \begin{aligned} \rho_f\partial_t u-\nabla\cdot\sigma_f(u,p_f)&=f_f, &&\text{in }\Omega_f,\\ \nabla\cdot u&=0, &&\text{in }\Omega_f,\\ \rho_p\partial_t\xi-\nabla\cdot\sigma_p(\eta,\phi)&=f_p, &&\text{in }\Omega_p,\\ \partial_t\eta&=\xi, &&\text{in }\Omega_p,\\ C_0\partial_t\phi+\alpha\nabla\cdot\xi-\nabla\cdot(K\nabla\phi)&=g_p, &&\text{in }\Omega_p,\\ u_p&=-K\nabla\phi, &&\text{in }\Omega_p. \end{aligned} \right. \tag*{(2)}

Here ρf,ρp,μf,μp,C0>0\rho_f,\rho_p,\mu_f,\mu_p,C_0>0, λp≥0\lambda_p\ge0, and the Biot–Willis coefficient α∈R\alpha\in\mathbb{R} is fixed [1]. The time-independent conductivity K∈L∞(Ωp)d×dK \in L^\infty(\Omega_p)^{d\times d} is symmetric and uniformly positive definite. We impose the homogeneous Dirichlet boundary conditions, namely u=0u=0 on Σf\Sigma_f, η=ξ=0\eta=\xi=0 on Σp\Sigma_p, and ϕ=0\phi=0 on Σp\Sigma_p, and prescribe compatible initial data. We note that these boundary conditions are part of the analytical setting, rather than a claim covering every application boundary condition.

Coupling conditions and energy

On the fluid structure interface Γ\Gamma, we consider the following physical coupling conditions, as reported in (cf. [1])

u⋅nf=(ξ−K∇ϕ)⋅nf,(3)\mathbf{u}\cdot\mathbf{n}_{f}=(\boldsymbol{\xi}-K\nabla\phi)\cdot\mathbf{n}_{f}, \tag*{(3)}
Pσfnf=−γP(u−ξ),(4)P\boldsymbol{\sigma}_{f}\mathbf{n}_{f}=-\gamma P(\mathbf{u}-\boldsymbol{\xi}), \tag*{(4)}
nf⋅σfnf=−ϕ,(5)\mathbf{n}_{f}\cdot\boldsymbol{\sigma}_{f}\mathbf{n}_{f}=-\phi, \tag*{(5)}
σfnf=−σpnp.(6)\boldsymbol{\sigma}_{f}\mathbf{n}_{f}=-\boldsymbol{\sigma}_{p}\mathbf{n}_{p}. \tag*{(6)}

Where γ>0\gamma>0 is the Beavers–Joseph–Saffman coefficient. In particular, we can derive the mechanical normal condition on the porous side from (5) and (6), satisfying

np⋅σp(η,ϕ)np+ϕ=0.(7)\mathbf{n}_{p}\cdot\boldsymbol{\sigma}_{p}(\boldsymbol{\eta},\phi)\mathbf{n}_{p}+\phi=0. \tag*{(7)}

It is Neumann-type with respect to the mechanics equation and remains coupled to the unknown pore pressure.

We consider the following function spaces

Vf={v∈H1(Ωf)d:v∣Σf=0},Qf=L2(Ωf),\mathbf{V}_{f}=\{\mathbf{v}\in H^{1}(\Omega_{f})^{d}:\mathbf{v}|_{\Sigma_{f}}=0\},\qquad Q_{f}=L^{2}(\Omega_{f}),
Vp={ζ∈H1(Ωp)d:ζ∣Σp=0},Qp={ψ∈H1(Ωp):ψ∣Σp=0}.\mathbf{V}_{p}=\{\boldsymbol{\zeta}\in H^{1}(\Omega_{p})^{d}:\boldsymbol{\zeta}|_{\Sigma_{p}}=0\},\qquad Q_{p}=\{\psi\in H^{1}(\Omega_{p}):\psi|_{\Sigma_{p}}=0\}.

For inner products (⋅,⋅)i(\cdot,\cdot)_{i} on L2(Ωi)L^{2}(\Omega_{i}) (i=f,p)(i=f,p) and interface pairing ⟨⋅,⋅⟩Γ\langle\cdot,\cdot\rangle_{\Gamma}, we introduce the following bilinear forms and norm:

af(u,v)=2μf(D(u),D(v))f,a_{f}(\mathbf{u},\mathbf{v})=2\mu_{f}(D(\mathbf{u}),D(\mathbf{v}))_{f},
ae(η,ζ)=2μp(D(η),D(ζ))p+λp(∇⋅η,∇⋅ζ)p,a_{e}(\boldsymbol{\eta},\boldsymbol{\zeta})=2\mu_{p}(D(\boldsymbol{\eta}),D(\boldsymbol{\zeta}))_{p}+\lambda_{p}(\nabla\cdot\boldsymbol{\eta},\nabla\cdot\boldsymbol{\zeta})_{p},
d(ϕ,ψ)=(K∇ϕ,∇ψ)p,∥η∥ae2=ae(η,η).d(\phi,\psi)=(K\nabla\phi,\nabla\psi)_{p},\qquad\|\boldsymbol{\eta}\|_{a_{e}}^{2}=a_{e}(\boldsymbol{\eta},\boldsymbol{\eta}).

The coupled weak formulation of (2), with ∂tη=ξ\partial_{t}\boldsymbol{\eta}=\boldsymbol{\xi}, is

References

  1. [1]Yifan Wang, Jeonghun Lee, and Sunčica Čanić. Second order explicit splitting scheme for fluid-poroelastic structure interaction problems. arXiv:2606.19811, 2026. https://doi.org/10.48550/arXiv.2606.19811.
  2. [2]Maurice A. Biot. General theory of three-dimensional consolidation. Journal of Applied Physics, 12:155–164, 1941.DOI
  3. [3]Maurice A. Biot. Theory of elasticity and consolidation for a porous anisotropic solid. Journal of Applied Physics, 26:182–185, 1955.DOI
  4. [4]Santiago Badia, Annalisa Quaini, and Alfio Quarteroni. Coupling Biot and Navier–Stokes equations for modelling fluid–poroelastic media interaction. Journal of Computational Physics, 228(21):7986–8014, 2009. https://doi.org/10.1016/j.jcp.2009.07.019.
  5. [5]Martina Bukač, Ivan Yotov, R. Zakerzadeh, and Paolo Zunino. Partitioning strategies for the interaction of a fluid with a poroelastic material based on a Nitsche’s coupling approach. Computer Methods in Applied Mechanics and Engineering, 292:138–170, 2015. https://doi.org/10.1016/j.cma.2014.10.047.
  6. [6]Martina Bukač, Ivan Yotov, and Paolo Zunino. An operator splitting approach for the interaction between a fluid and a multilayered poroelastic structure. Numerical Methods for Partial Differential Equations, 31(4):1054–1100, 2015. https://doi.org/10.1002/num.21936.
  7. [7]Ilona Ambartsumyan, Eldar Khattatov, Ivan Yotov, and Paolo Zunino. A Lagrange multiplier method for a Stokes–Biot fluid–poroelastic structure interaction model. Numerische Mathematik, 140:513–553, 2018. https://doi.org/10.1007/s00211-018-0967-1.
  8. [8]Tongtong Li and Ivan Yotov. A mixed elasticity formulation for fluid–poroelastic structure interaction. ESAIM: Mathematical Modelling and Numerical Analysis, 56(1):1–40, 2022. https://doi.org/10.1051/m2an/2021083.
  9. [9]Sergio Caucão, Tongtong Li, and Ivan Yotov. A multipoint stress–flux mixed finite element method for the Stokes–Biot model. Numerische Mathematik, 152:411–473, 2022. https://doi.org/10.1007/s00211-022-01310-2.
  10. [10]Ricardo Ruiz-Baier, Matteo Taffetani, Hans D. Westermeyer, and Ivan Yotov. The Biot–Stokes coupling using total pressure: Formulation, analysis and application to interfacial flow in the eye. Computer Methods in Applied Mechanics and Engineering, 389:114384, 2022. https://doi.org/10.1016/j.cma.2021.114384.
  11. [11]A. Cesmelioglu, J. J. Lee, and S. Rhebergen. Hybridizable discontinuous Galerkin methods for the coupled Stokes–Biot problem. Computers & Mathematics with Applications, 144:12–33, 2023. https://doi.org/10.1016/j.camwa.2023.05.024.
  12. [12]Miguel A. Fernández, Jimmy Mullaert, and Marina Vidrascu. Explicit Robin–Neumann schemes for the coupling of incompressible fluids with thin-walled structures. Computer Methods in Applied Mechanics and Engineering, 267:566–593, 2013. https://doi.org/10.1016/j.cma.2013.09.020.
  13. [13]Erik Burman, Rebecca Durst, Miguel A. Fernández, and Johnny Guzmán. Fully discrete loosely coupled Robin–Robin scheme for incompressible fluid–structure interaction: Stability and error analysis. Numerische Mathematik, 151:807–840, 2022. https://doi.org/10.1007/s00211-022-01295-y.
  14. [14]Erik Burman, Rebecca Durst, Miguel A. Fernández, and Johnny Guzmán. Loosely coupled, non-iterative time-splitting scheme based on Robin–Robin coupling: Unified analysis for parabolic/parabolic and parabolic/hyperbolic problems. Journal of Numerical Mathematics, 31(1):59–77, 2023. https://doi.org/10.1515/jnma-2021-0119.
  15. [15]Aashi Dalal, Rebecca Durst, Analisa Quaini, and Ivan Yotov. A Robin–Robin splitting method for the Stokes–Biot fluid–poroelastic structure interaction model. Mathematics of Computation, 2025. https://doi.org/10.1090/mcom/4156.
  16. [16]Shihan Guo, Yizhong Sun, Yifan Wang, Xiaohe Yue, and Haibiao Zheng. A fully parallelizable loosely coupled scheme for fluid–poroelastic structure interaction problems. SIAM Journal on Scientific Computing, 47(4):B951–B975, 2025. https://doi.org/10.1137/24M1695713.
  17. [17]O. Oyekole and Martina Bukač. Second-order, loosely coupled methods for fluid-poroelastic material interaction. Numerical Methods for Partial Differential Equations, 36:800–822, 2020. https://doi.org/10.1002/num.22452.
  18. [18]Hemanta Kunwar, Hyesuk Lee, and Kyle Seelman. Second-order time discretization for a coupled quasi-Newtonian fluid-poroelastic system. International Journal for Numerical Methods in Fluids, 92(7):687–702, 2020. https://doi.org/10.1002/fld.4801.
  19. [19]Connor Parrow and Martina Bukač. A Robin–Robin strongly coupled partitioned method for fluid–poroelastic structure interaction. Journal of Numerical Mathematics, 33:289–312, 2025. https://doi.org/10.1515/jnma-2024-0057.
  20. [20]Connor Parrow and Martina Bukač. Stability and error analysis of a partitioned Robin–Robin method for fluid poroelastic structure interaction. Journal of Scientific Computing, 106:40, 2026. https://doi.org/10.1007/s10915-025-03143-1.
  21. [21]Douglas N. Arnold, Franco Brezzi, and Michel Fortin. A stable finite element for the Stokes equations. Calcolo, 21(4):337–344, 1984.DOI
  22. [22]C. Taylor and P. Hood. A numerical solution of the Navier–Stokes equations using the finite element technique. Computers & Fluids, 1(1):73–100, 1973.DOI
  23. [23]Daniele Boffi, Franco Brezzi, and Michel Fortin. Mixed Finite Element Methods and Applications, volume 44 of Springer Series in Computational Mathematics. Springer, Berlin, Heidelberg, 2013.DOI
  24. [24]Daniele Antonio Di Pietro and Alexandre Ern. Mathematical Aspects of Discontinuous Galerkin Methods, volume 69 of Mathématiques et Applications. Springer, 2012.
  25. [25]Susanne C. Brenner and L. Ridgway Scott. The Mathematical Theory of Finite Element Methods, volume 15 of Texts in Applied Mathematics. Springer, 3 edition, 2008.

Paper details

vlnc:W_naqvnzzw
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Mathematics

Not recorded for this paper

View statement
Looking for related papers…
Contents