betaFeedback

WorksPhysics and Astronomy

The R-index: A universal metric for evaluating OAM content and mode purity in optical fields

Abstract

Despite its pivotal role in optical manipulation, high-capacity communications, and quantum information, a general measure of orbital angular momentum (OAM) in structured light remains elusive. In optical fields, where multiple vortices coexist, the local nature of vortex OAM and the absence of a common rotation axis make the total OAM of the field difficult to quantify. Here, we introduce the R-index, a metric that captures the intrinsic OAM content of any structured optical field, from pure Laguerre-Gaussian modes to arbitrary multi-vortex superpositions. Not only does this metric quantify the total OAM, it also assesses field purity, providing insight into the fidelity and robustness of the OAM generation. By unifying OAM characterization into a single figure of merit, the R-index enables direct comparison across diverse beam profiles and facilitates the identification of optimal configurations for both foundational studies and applied technologies.

Introduction

Since the seminal work of Allen et al. [1], which demonstrated that electromagnetic waves can carry well-defined orbital angular momentum (OAM), this discrete, and in principle unbounded, property of light has evolved from a theoretical concept into a practical resource. The ladder of OAM eigenstates offers high-dimensional encoding capacity for classical and quantum communication [2, 3, 4], facilitates the transfer of rotational torque in optical micromanipulation [5, 6], and underpins emerging OAM-enhanced spectroscopic techniques [7]. Recent advances in wavefront-shaping optics, spiral phase plates, computer-generated holograms, and spatial light modulators, now permit the routine generation and analysis of OAM beams [8, 9, 10, 11], thereby broadening their applicability across photonics and related disciplines [12, 13, 14, 15], also including quantum information processing [16], particle manipulation [17], and light-matter interaction [18, 19, 20, 21].

The total angular momentum of an optical beam comprises an intrinsic component, determined solely by the internal field distribution, and an extrinsic component that depends on the displacement of the beam axis relative to the observation axis. Within the intrinsic part, one distinguishes spin angular momentum (SAM), related to the polarization of light, and OAM, which stems predominantly from the optical vortices [1]. In a coherent light wave, represented by a complex scalar field propagating in free space, optical vortices arise at points of zero intensity, called nodes, where the phase is undefined. Around these singularities, the phase gradient forms a circulating pattern, characterized by an azimuthal phase

dependence of the form exp⁡(ilϕ)\exp(il\phi), where ll is the topological charge and ϕ\phi is the azimuthal angle. Such a phase structure in an optical vortex corresponds to a quantized angular momentum of magnitude ℏl\hbar l per photon. As clarified in Ref. [22], the helical phase factor exp⁡(ilϕ)\exp(il\phi) is the principal descriptor of the intrinsic OAM. It gives rise to a precession of the Poynting vector and the associated azimuthal orbital flow density (OFD). In contrast, SAM arises from the rotation of electric field vectors and is quantified by the spin flow density (SFD) [23]. Together, OFD and SFD exhaust the intrinsic angular momentum content of an optical beam. These complementary flow densities offer experimentally accessible measures of the respective angular momentum contributions.

For an ideal paraxial beam containing a single vortex, all photons share the same helical phase factor, and the OAM can be unambiguously defined with respect to the common propagation axis. But, in practice, many beams are spatially structured optical fields (SSOFs) that contain multiple vortices. In such cases, three considerations preclude a straightforward definition of the total orbital angular momentum:

  1. Local character of a vortex OAM. Each vortex is associated with a unique phase singularity, whose topological charge may differ from charges of other vortices. The associated OAM remains local to the singularity and does not extend globally on the beam.

  1. Vortex interference. Superposition of individual vortex wavefronts generates intricate interference patterns and secondary phase singularities, such that a simple sum of single-vortex OAM does not describe the composite field.

  1. Absence of a common rotation axis. Whereas a single vortex beam, such as a Laguerre-Gaussian mode, has a single optical axis, the vortex array in

a generic SSOF is described by several, in general different, rotational axes. Subsequently, the overall field lacks global rotational symmetry.

Collectively, these factors imply that the total OAM content of an elaborately structured field cannot be deduced by enumerating vortices or by projecting onto a standard mode basis. Accessing the fitness of the field for applications, for instance, OAM-enhanced spectroscopy [7] requires a quantitative measure of the rotational energy flux in terms of a more rigorous metric.

In this paper, we introduce a unified measure, the R-index, based on the relative amplitude of the solenoidal component of the OFD, which provides an estimate of the photon fraction available for OAM-mediated interactions. Our calculations demonstrate its efficacy in identifying the OAM content across a broad range of beam types, including Laguerre-Gaussian (LG), Gaussians, superpositions of Hermite-Gaussian (HG) beams and vortex-bearing optical lattices making it a universal tool for structured light analysis. The ability of the R-index to reduce the OAM content characterization to a single figure-of-merit makes it an attractive tool for selecting the appropriate structure of the electric field for OAM-enabled fundamental studies or technological applications. Moreover, we demonstrate its ability to act as a quality factor by assessing the mode purity of LG modes generated by spiral phase plates. This application is particularly important for mid-infrared applications where high-fidelity optical vortex generating apparatuses, such as spatial light modulators are unavailable.

Our paper is structured as follows. In Sec. II we review how the orbital flow density of a light field can be extracted from its phase gradients. In Sec. III we introduce our main tool the Helmholtz-Hodge decomposition, via which we can separate the solenoidal, OAM bearing, phase gradients from the irrotational part. In Sec. IV we define the main quantity discussed in our paper, the R-index. Section V summarizes the numerical techniques employed for the evaluation of the R-index. The focal parts of our work are Sec. VI describing our numerical findings for various field profiles and Sec. VII providing the analytical evaluation of the R-index for Laguerre-Gaussian beams. Sec. VIII summarizes our findings and provides future perspectives. Finally, Appendix A provides extended data tables for various superpositions of Hermite-Gaussian modes.

Orbital flow characteristics

Our approach consists of tracing the internal energy flows of the field, also known as optical currents, one of its intrinsic features that reveals details of its structure and dynamics [24]. These paths can be represented as curves that are everywhere tangent to the Poynting vector, a quantity that links to the dynamical attributes of optical fields. We consider a field ψ(r)=∣E(r)∣eiφ(r)\psi(\mathbf{r}) = |E(\mathbf{r})|e^{i\varphi(\mathbf{r})} and E(r)=e^pψ(r)\mathbf{E}(\mathbf{r}) = \hat{\mathbf{e}}_p\psi(\mathbf{r}) and e^p\hat{\mathbf{e}}_p is the polarization of light, assumed here to be homogeneous so we can treat the electric field as scalar.

The optical current associated to the field ψ(r)\psi(\mathbf{r}) is j(r)\mathbf{j}(\mathbf{r}) [24], it equals the time-averaged energy flow and is given by

j(r)=I(r)∇φ(r),(1)\mathbf{j}(\mathbf{r}) = I(\mathbf{r})\nabla\varphi(\mathbf{r}), \tag*{(1)}

where I(r)=cε02ψ(r)ψ∗(r)I(\mathbf{r}) = \frac{c\varepsilon_0}{2}\psi(\mathbf{r})\psi^*(\mathbf{r}) is the intensity and ψ∗(r)\psi^*(\mathbf{r}) is the conjugate of ψ(r)\psi(\mathbf{r}), ∇\nabla represents the gradient operator, and φ(r)≡arg⁡(ψ(r))\varphi(\mathbf{r}) \equiv\arg(\psi(\mathbf{r})) is the phase of the optical field. The optical current is closely associated with the Poynting vector P(r)\mathbf{P}(\mathbf{r}), indicating the flow of energy and is directly proportional to the canonical energy flow density. The Poynting vector reads

P(r)=Im⁡[ψ∗(r)∇ψ(r)]2μ0ω=∣ψ∣2∇φ(r)2μ0ω=1kI(r)∇φ(r),(2)\mathbf{P}(\mathbf{r}) = \frac{\operatorname{Im}[\psi^*(\mathbf{r})\nabla\psi(\mathbf{r})]}{2\mu_0\omega} = \frac{|\psi|^2\nabla\varphi(\mathbf{r})}{2\mu_0\omega} = \frac{1}{k}I(\mathbf{r})\nabla\varphi(\mathbf{r}), \tag*{(2)}

The right hand side of the above directly yields the relation P(r)=j(r)/k\mathbf{P}(\mathbf{r}) = \mathbf{j}(\mathbf{r})/k. This expression also shows the association of both j(r)\mathbf{j}(\mathbf{r}) and P(r)\mathbf{P}(\mathbf{r}) with the probability current in quantum mechanics Im⁡[ψ∗(r)∇ψ(r)]\operatorname{Im}[\psi^*(\mathbf{r})\nabla\psi(\mathbf{r})] and which is sometimes used synonymously with the Poynting vector in electromagnetic fields. P(r)\mathbf{P}(\mathbf{r}) is essential for calculating the OAM of any optical field and aids in understanding how small particles interact with the field [25]. This momentum density has a transverse azimuthal component produced by the helical phase of the optical vortex and is a signature of the vortex modes. It is canonical and proportional to the local gradient of the phase of the field, that is, to the local wave vector. Therefore, the canonical orbital energy flow is independent of the polarization in uniformly polarized fields and can be equally defined for a scalar wave field ψ(r)\psi(\mathbf{r}).

As manifested in Eq. (1) and Eq. (2) both of these quantities can be expressed in terms of the phase gradient given by

∇φ(r)=Im⁡[∇log⁡ψ(r)]=Im⁡[∇ψ(r)ψ(r)].(3)\nabla\varphi(\mathbf{r}) = \operatorname{Im}[\nabla\log\psi(\mathbf{r})] = \operatorname{Im}\left[\frac{\nabla\psi(\mathbf{r})}{\psi(\mathbf{r})}\right]. \tag*{(3)}

This gradient points in the direction where there is a maximum change in phase. Gradients are normal to contour surfaces, and hence the phase gradient is always normal to the wavefront [26]. The phase gradient ∇φ(r)\nabla\varphi(\mathbf{r}) is a vector field that can provide information about light propagation as ∇φ(r)∝k(r)\nabla\varphi(\mathbf{r}) \propto\mathbf{k}(\mathbf{r}), with k(r)\mathbf{k}(\mathbf{r}) the local wavevector, and the associated energy flow.

We are mainly concerned with the energy flow on a plane perpendicular to the propagation axis of the beam, which dictates how a planar probe interacts with light. The associated phase gradient field reads

F(r)≡∇φ(r)−k∣k∣2k⋅∇φ(r).(4)\mathbf{F}(\mathbf{r}) \equiv\nabla\varphi(\mathbf{r}) - \frac{\mathbf{k}}{|\mathbf{k}|^2}\mathbf{k}\cdot\nabla\varphi(\mathbf{r}). \tag*{(4)}

By applying the Helmholtz-Hodge Decomposition, discussed in Sec. III, we isolate the rotational energy flows or solenoidal phase gradients within the field [27], enabling us to distill the OAM content of the beam.

Helmholtz-Hodge Decomposition

The Helmholtz-Hodge Decomposition (HHD) is grounded in the Helmholtz theorem [28], which asserts that any field F\mathbf{F}, defined in a region Ω\Omega on a bounded domain, can be segregated into an irrotational (curl-free) fIR\mathbf{f}_{\mathrm{IR}} and a solenoidal (divergence-free) fR\mathbf{f}_{\mathrm{R}} component, determined by

F(r)=∇Φ(r)+∇×A(r),(5)\mathbf{F}(\mathbf{r}) = \nabla\Phi(\mathbf{r}) + \nabla\times\mathbf{A}(\mathbf{r}), \tag*{(5)}

where Φ(r)\Phi(\mathbf{r}) and A(r)\mathbf{A}(\mathbf{r}) are the scalar and vector potentials of F(r)\mathbf{F}(\mathbf{r}), respectively, not to be confused with the corresponding scalar and vector potentials of the electric and magnetic field. These quantities can be obtained from Poisson’s equations:

Φ(r)=14π∫V∇⋅F(r′)∣r−r′∣ dV′,(6)\Phi(\mathbf{r}) = \frac{1}{4\pi}\int_{V} \frac{\nabla\cdot\mathbf{F}(\mathbf{r}')}{\lvert\mathbf{r}-\mathbf{r}'\rvert}\,\mathrm{d}V', \tag*{(6)}
A(r)=14π∫V∇×F(r′)∣r−r′∣ dV′.(7)\mathbf{A}(\mathbf{r}) = \frac{1}{4\pi}\int_{V} \frac{\nabla\times\mathbf{F}(\mathbf{r}')}{\lvert\mathbf{r}-\mathbf{r}'\rvert}\,\mathrm{d}V'. \tag*{(7)}

These potentials Φ(r)\Phi(\mathbf{r}) and A(r)\mathbf{A}(\mathbf{r}) allow the field F\mathbf{F} to be segregated into the curl-free and divergence-free components within a volume VV. The boundary conditions that are imposed in this decomposition ensure a normal boundary flow on the curl-free component and a tangential flow on the divergence-free component. Considering n^\hat{\mathbf{n}} as the outward normal to the boundary Ω\Omega, this implies that for a unique decomposition:

  • The irrotational component is normal to the boundary dΩ\mathrm{d}\Omega of Ω\Omega, i.e., fIR×n^=0\mathbf{f}_{\mathrm{IR}} \times\hat{\mathbf{n}} = 0, and

  • The solenoidal component is parallel to the boundary dΩ\mathrm{d}\Omega of Ω\Omega, i.e., fR⋅n^=0\mathbf{f}_{\mathrm{R}} \cdot\hat{\mathbf{n}} = 0.

Main Quantities: the definition of the R-Index and the solenoidal current

The R-Index represents the fraction of the rotational orbital angular energy density in a structured optical field. The magnitude of the rotational part of the decomposed vector field, ∣fR(r)∣\lvert\mathbf{f}_{\mathrm{R}}(\mathbf{r})\rvert, quantifies the total solenoidal currents or the azimuthal currents present in the field. In other words, the associated Poynting vector component PR(k)=∣fR(r)∣I(r)/k\mathbf{P}_{\mathrm{R}}(k) = \lvert\mathbf{f}_{\mathrm{R}}(\mathbf{r})\rvert I(\mathbf{r})/k determines the total circulating power within a cross section of area AA of the beam at a plane zz. Mathematically, the R-index is defined as:

R(z)=∬∣fR(r)∣I(r) dA∬(∣fR(r)∣+∣fIR(r)∣)I(r) dA,(8)R(z) = \frac{\iint\lvert\mathbf{f}_{\mathrm{R}}(\mathbf{r})\rvert I(\mathbf{r})\,\mathrm{d}A}{\iint\left(\lvert\mathbf{f}_{\mathrm{R}}(\mathbf{r})\rvert+ \lvert\mathbf{f}_{\mathrm{IR}}(\mathbf{r})\rvert\right) I(\mathbf{r})\,\mathrm{d}A}, \tag*{(8)}

Thus, it quantifies the fraction of the average solenoidal power over the average total power transport within the z=const.z = \mathrm{const.} plane. The R-Index serves as a valuable metric for determining the available intrinsic orbital energy flow in structured fields, offering insight into their suitability for various OAM-based applications. The total orbital flow density in a field is responsible for the beam divergence, self-diffraction, and transverse energy circulation. The R-index is therefore associated with the extracted azimuthal flow component that leads to the OAM of the beam. In other words, the R-index directly correlates to the number of photons that possess OAM and are available for interaction for a planar probe.

Notice, that the R-index is not a measure of the strength of the solenoidal current since it only relies on its fraction relative to the irrotational component. This means that the comparison of two beams in terms of their R-index does not lead to a conclusion on which beams has a larger amplitude of solenoidal currents. To resolve this in our analysis we additionally calculate the normalized solenoidal current strength reading

JˉS(z)=∬∣fR(r)∣I(r) dA∬I(r) dA,(9)\bar{J}_{\mathrm{S}}(z) = \frac{\iint\lvert\mathbf{f}_{\mathrm{R}}(\mathbf{r})\rvert I(\mathbf{r})\,\mathrm{d}A}{\iint I(\mathbf{r})\,\mathrm{d}A}, \tag*{(9)}

which directly probes the amplitude of the solenoidal currents in the beam. Notice that this quantity is not dimensionless but it scales inversely proportional to the characteristic length scale of the spatial structure of the light field. For beams, JˉS∝w0−1\bar{J}_{\mathrm{S}} \propto w_{0}^{-1} implying that tighter beams involve stronger currents, due to the increased involved phase gradients, see Eq. (1).

Numerical approach

The HHD of the phase gradient vector field was carried out by employing Fast Fourier Transform (FFT) techniques. The field F(r)\mathbf{F}(\mathbf{r}) was first sampled on a uniform Cartesian grid by employing Eq. (3) and Eq. (4) for its extraction from ψ(r)\psi(\mathbf{r}) and its on-plane projection respectively. The grid was chosen such as it corresponds to a FFT Discrete Variable Representation (DVR) [29] enabling the efficient calculation of derivatives and integrals. Since FFT introduces periodic boundary conditions the value of ψ(r)\psi(\mathbf{r}) at the edges of our numerical grid were masked by Tukey windows to avoid artifacts. Notice that the mask of the Tukey windows addresses only regions of I<10−6I0I < 10^{-6}I_{0}, which are subsequently dropped from our analysis.

The HHD was performed by numerically solving the Poisson equation

∇2Φ(r)=∇⋅F(r),(10)\nabla^{2}\Phi(\mathbf{r}) = \nabla\cdot\mathbf{F}(\mathbf{r}), \tag*{(10)}

resulting to fIR(r)=∇Φ(r)\mathbf{f}_{\mathrm{IR}}(\mathbf{r}) = \nabla\Phi(\mathbf{r}) and fR(r)=F(r)−∇Φ(r)\mathbf{f}_{\mathrm{R}}(\mathbf{r}) = \mathbf{F}(\mathbf{r}) - \nabla\Phi(\mathbf{r}). The right hand side ∇⋅F(r)\nabla\cdot\mathbf{F}(\mathbf{r}) can exhibit steep behavior close to the vortices, we resort to a FFT-based finite difference solver for the Poisson equation [30] in order to avoid issues with spectral ringing. Within this approach the solution in Fourier space reads

F[Φ](kx,ky)=12(cos⁡2πkxNx−1Δx2+cos⁡2πkyNy−1Δy2)−1×F[∇⋅F](kx,ky),(11)\mathcal{F}[\Phi](k_x,k_y)=\frac{1}{2}\left(\frac{\cos\frac{2\pi k_x}{N_x}-1}{\Delta x^2}+\frac{\cos\frac{2\pi k_y}{N_y}-1}{\Delta y^2}\right)^{-1}\times\mathcal{F}[\nabla\cdot\mathbf{F}](k_x,k_y), \tag*{(11)}

where kμk_\mu, NμN_\mu, Δμ\Delta_\mu, with μ={x,y}\mu=\{x,y\} are the grid positions, number of grid points, grid spacing for the μ\mu direction respectively and F\mathcal{F} represents the FFT. The boundary condition fIR×n^=0\mathbf{f}_{\mathrm{IR}}\times\hat{\mathbf{n}}=0 is enforced geometrically by the mirror symmetry of the source ∇⋅F(r)\nabla\cdot\mathbf{F}(\mathbf{r}) for x→−xx\to-x and y→−yy\to-y that we impose by appropriately choosing the orientation of the beam ψ(r)\psi(\mathbf{r}) and the periodic boundary conditions naturally stemming from the FFT.

All calculations were performed in MATLAB. The FFT DVR employed consists of 4096 points for each direction, while it extents between ∣x∣,∣y∣<4ω0|x|,|y|<4\sqrt{\omega_0}, where o≥1o\geq1 is the maximum mode order of the Laguerre–Gaussian or Hermite–Gaussian components. The Tuckey windows affect the outer 20% of the grid. The above choices provide sufficient resolution to capture both the fine structure of the field and allow for the smooth decay towards the boundaries.

Results: Evaluation of R-Index across various field profiles

We conducted extensive numerical calculations to compute the R-index for diverse SSOF profiles, demonstrating its universal applicability in quantifying the OAM content. This quantity, defined as the intensity-weighted fraction of solenoidal optical currents, (8), serves as a direct metric for OAM accessibility in photons. To quantify the solenoidal field flow we also evaluate the normalized solenoidal current strength, Jˉs\bar{J}_s, see (9).

Throughout our analysis we use scaled units with respect to w0w_0 and zRz_R. Since we consider fixed z/zRz/z_R, the precise value of λ\lambda for fixed w0w_0 does not affect our calculations except for a shift of the phase ∼e−ikz\sim e^{-ikz}, that affects neither Jˉs\bar{J}_s or the R-index.

Our key findings are summarized below:

Pure Laguerre-Gaussian (LG) beams– The profile of these beams reads

ψp,lLG(r)=E0w0w(z)(2rw(z))∣l∣Lp∣l∣(2r2w2(z))×exp⁡(−r2w2(z))exp⁡(−ikr22R(z))×exp⁡(−ikz)exp⁡(iξ(z))exp⁡(ilϕ),(12)\psi_{p,l}^{\mathrm{LG}}(\mathbf{r})=E_0\frac{w_0}{w(z)}\left(\frac{\sqrt{2}r}{w(z)}\right)^{|l|}L_p^{|l|}\left(\frac{2r^2}{w^2(z)}\right)\times\exp\left(-\frac{r^2}{w^2(z)}\right)\exp\left(-i\frac{kr^2}{2R(z)}\right)\times\exp(-ikz)\exp(i\xi(z))\exp(il\phi), \tag*{(12)}

where E0E_0 is the field amplitude, w0w_0 the beam waist, w(z)=w01+(z/zR)2w(z)=w_0\sqrt{1+(z/z_R)^2}, zR=πw02/λz_R=\pi w_0^2/\lambda is the Rayleigh range, R(z)=z[1+(zR/z)2]R(z)=z[1+(z_R/z)^2] is the radius of curvature, and ξ(z)=(∣l∣+p+1)tan⁡−1(z/zR)\xi(z)=(|l|+p+1)\tan^{-1}(z/z_R) is the Gouy phase.

Exactly at the focus z=0z=0, these beams have a purely azimuthal F(r)\mathbf{F}(\mathbf{r}), leading to a purely solenoidal current since ∇⋅F(r)=0\nabla\cdot\mathbf{F}(\mathbf{r})=0, and hence an R-index of 1. The strength of this solenoidal current increases with the topological charge Jˉs∼2l\bar{J}_s\sim\sqrt{2l} as revealed in Figure 1. However, as the beam propagates away from its focus its divergence leads to additional radial currents that cause the reduction of the R-index. Details on the z/zRz/z_R dependence of the R-index for Laguerre–Gaussian beams are discussed in Sec. VII. For comparison to other field profiles, here, we consider a beam propagated to z=0.1 zRz=0.1\,z_R. Table 1 reveals that such a beam with p=0p=0 and l=1l=1 achieves an R-index of 0.87 thus retaining near-ideal OAM purity (87% rotational energy flow).

Figure 1. The normalized solenoidal current strength, Jˉs\bar{J}_s, as a function of the topological charge for LG beams (p=0p=0 and l=1l=1 to 9) for z=0z=0.

SSOF profilePure LG beam (l=1l=1 and z=0.1zRz=0.1z_R)Gaussian beam with imprinted LG phase (l=1l=1 and z=0.1zRz=0.1z_R)Honeycomb optical lattice
Jˉs\bar{J}_s (units of w0−1w_0^{-1})1.2471.85627.53 (0.0964λ−10.0964\lambda^{-1})
R-index0.870.110.70
Intensity profile of SSOF

Table 1. TABLE I. Numerically obtained OAM content characteristics for three example SSOF profiles. The OAM is characterized in terms of the R-index and Jˉs\bar{J}_s and the corresponding intensity pattern (the phase appears in the inset) is additionally provided. For the comparison of the beam and lattice Jˉs\bar{J}_s and phase λ=0.0035w0\lambda=0.0035w_0 is considered.

The fraction of solenoidal orbital optical current density values were computed for LG beams with varying topological charges, revealing the increasing relationship (see Table II and Fig. 1).

Phase-imprinted Gaussian beam (Hypergeometric Gaussian beams)– A usual way that vortex beams of experimentally implementing vortex beams by imprinting the azimuthal phase of a Laguerre–Gaussian beam on a Gaussian mode. This is because Gaussian modes can be generated with very high fidelity [31, 32] and phase imprinting can be achieved with readily available methods such as spiral phase plates or spatial light modulators (SLM) [33]. To consider such a phase imprinting process we use the ideal case for both the focused Gaussian beam with the additional spiral phase corresponding to l=1l=1

ψIM(r,ϕ,z=0)=E0exp⁡(−r2w02)eiϕ.(13)\psi^{\mathrm{IM}}(r,\phi,z=0)=E_0\exp\left(-\frac{r^2}{w_0^2}\right)e^{i\phi}. \tag*{(13)}

The solution of the paraxial equation with the above field at the focus z=0z=0 is known to be an example of a Hypergeometric Gaussian mode (HyGG) and in particular a modified Bessel-Gauss mode [34]. The field of this beam reads

Topological Charge llJˉs\bar{J}_s units of w0−1w_0^{-1}R-index
11.2470.869
21.8710.889
32.3390.896
42.7280.899
53.0690.901
63.3760.902
73.6570.903
83.9180.904
94.1630.905

Table 2. TABLE II. Magnitude of extracted solenoidal phase gradient Jˉs\bar{J}_s and R-index for LG beams (topological charges 1–9) at z=0.1zRz=0.1z_R from focus.

ψIM(r~,ϕ,z~)=E0π2r~z~(z~+i)3/2exp⁡(−ir~2z~)[I0(r~22z~(z~+i))−I1(r~22z~(z~+i))](14)\psi^{\mathrm{IM}}(\tilde{r},\phi,\tilde{z})=E_0\frac{\sqrt{\pi}}{2}\frac{\tilde{r}}{\sqrt{\tilde{z}}(\tilde{z}+i)^{3/2}}\exp\left(-\frac{i\tilde{r}^{2}}{\tilde{z}}\right)\left[I_0\left(\frac{\tilde{r}^{2}}{2\tilde{z}(\tilde{z}+i)}\right)-I_1\left(\frac{\tilde{r}^{2}}{2\tilde{z}(\tilde{z}+i)}\right)\right] \tag*{(14)}
exp⁡(−r~22z~(z~+i)+iϕ−ikz),\exp\left(-\frac{\tilde{r}^{2}}{2\tilde{z}(\tilde{z}+i)}+i\phi-ikz\right),

where we have introduced the scaled coordinates z~=z/zR\tilde{z}=z/z_R and r~=r/w0\tilde{r}=r/w_0. A distinctive property of this beam is the factor e−ir~2/z~e^{-i\tilde{r}^{2}/\tilde{z}} corresponding to a steep phase gradient in the direction away from the focus. This gradient corresponds to a radial current j(r)\mathbf{j}(r) that forces the intensity away from r=0r=0 where the optical vortex is imprinted.

Table 1 manifests that while the solenoidal current Jˉs\bar{J}_s is similar in amplitude to the case of the vortex beam, the R-index is very small taking a value of 0.11. This behavior occurs exactly because of the large radial current described above which contributes to the irrotational part of the phase gradient, fIR(r)f_{\mathrm{IR}}(r).

The above shows that the R-index is a sensitive probe of the purity of the generated OAM mode. By quantifying SPP-generated beam purity, the R-index provides a tool for optical vortex generation protocols. Its measurement by state-of-the-art phase measurement approaches such as phase-shifting holography [35], provides a detection pathway for optimizing fabrication tolerances of optical elements and alignment protocols. This is particularly crucial for mid-infrared applications where spatial light modulators are unavailable necessitating the development of novel optical vortex creation techniques.

Honeycomb optical lattice– An interference of three plane waves produces an optical vortex lattice, the field profile of which reads

ψL(r)=E0∑j=13exp⁡[−ik(sin⁡θcos⁡ϕjx+sin⁡θsin⁡ϕjy+cos⁡θz)],(15)\psi^{\mathrm{L}}(\mathbf{r})=E_0\sum_{j=1}^{3}\exp\left[-ik\left(\sin\theta\cos\phi_j x+\sin\theta\sin\phi_j y+\cos\theta z\right)\right], \tag*{(15)}

where k=2π/λk=2\pi/\lambda, θ=1.7∘\theta=1.7^\circ is the angle of the plane-waves with respect to zz-axis, and ϕj\phi_j are the corresponding azimuthal angles (ϕ1=120∘\phi_1=120^\circ, ϕ2=240∘\phi_2=240^\circ, ϕ3=360∘\phi_3=360^\circ).

This lattices exhibits an R-index of 0.70, when measured in the z=0z=0 plane, see Table I. This structure yields a large local solenoidal current as indicated by Jˉs\bar{J}_s, but fragmentation of dark cores leads to low percentage of OAM content. Notice that in the case of the lattice Jˉs\bar{J}_s is only dependent on λ\lambda. Here the value of Jˉs\bar{J}_s in terms of w0−1=0.0035λ−1w_0^{-1}=0.0035\lambda^{-1} is provided for comparison of the lattice and beam currents.

Hermite-Gaussian (HG) superpositions– Hermite-Gaussian beams of order m,nm,n, HGm,n\mathrm{HG}_{m,n}, are described by the well-known expression:

ψm,nHG(r)=E0w0w(z)Hm(2xw(z))Hn(2yw(z))×exp⁡(−x2+y2w(z)2)×exp⁡(−ikx2+y22R(z))×exp⁡(−iξ(z))exp⁡(−ikz).(16)\psi_{m,n}^{\mathrm{HG}}(\mathbf{r})=E_0\frac{w_0}{w(z)}H_m\left(\frac{\sqrt{2}x}{w(z)}\right)H_n\left(\frac{\sqrt{2}y}{w(z)}\right) \begin{aligned} &\times\exp\left(-\frac{x^2+y^2}{w(z)^2}\right)\\ &\times\exp\left(-ik\frac{x^2+y^2}{2R(z)}\right)\\ &\times\exp\left(-i\xi(z)\right)\exp(-ikz). \end{aligned} \tag*{(16)}

where HmH_m and HnH_n are Hermite polynomials of orders mm and nn, and w(z)w(z), R(z)R(z), and ξ(z)=(m+n+1)tan⁡−1(z/zR)\xi(z)=(m+n+1)\tan^{-1}(z/z_R) denote the beam radius, radius of curvature, and Gouy phase, respectively. The expressions for w(z)w(z) and R(z)R(z) are identical to the case of Laguerre–Gaussian beams, see Eq. (12).

Complex modes exhibiting optical vortices are formed by superpositions of such HG modes [36, 37] with varied phase differences introduced between them.

HG superposed profiles showed reduced R-index values, underscoring mode interference as a critical purity-limiting factor. It is evident that the phase difference between superposed modes significantly influences the R-index, as anticipated. For example, Table III shows that a superposition of HG2,0_{2,0} and HG0,2_{0,2} modes with a phase difference of π/2\pi/2 yields an R-index of 0.74, which decreases to 0.66 when the phase difference is modified to π/4\pi/4. In comparison, a superposition of HG1,3_{1,3} and HG3,1_{3,1} modes with a phase difference of π/2\pi/2 achieves an R-index of 0.83, indicating that nearly 83% of the photons in this configuration are available for OAM-based experimental applications.

SSOF ProfileHG2,0+HG0,2\mathrm{HG}_{2,0}+\mathrm{HG}_{0,2}HG2,0+HG0,2\mathrm{HG}_{2,0}+\mathrm{HG}_{0,2}HG1,3+HG3,1\mathrm{HG}_{1,3}+\mathrm{HG}_{3,1}
Phase Differenceπ/2\pi/2π/4\pi/4π/2\pi/2
Jˉs\bar{J}_s units of w0−1w_0^{-1}1.4101.3831.653
R-index0.740.660.83
Intensity Profileintensity profile imageintensity profile imageintensity profile image

Table III. Comparison of different SSOFs generated by superpositions of Hermite-Gaussian modes. The OAM is characterized in terms of the R-index and Jˉs\bar{J}_s and the corresponding intensity pattern (and phase in the case of phase imprinted Gaussian profile) is additionally provided. In all cases the field at the focus z=0z=0 is considered.

Table IV in Appendix A presents R-index values for a more diverse collection of structurally singular optical fields (SSOFs) formed through Hermite–Gaussian mode superpositions.

Our analysis demonstrates that Laguerre–Gaussian beams are optimal for efficient OAM transfer to planar targets. However, realizing high-purity LG beams necessitates the use of high-fidelity beam generation, which can be challenging, particularly in the mid-infrared (Mid-IR) spectral range. Given the absence of spatial light modulators (SLMs) in the Mid-IR and the current limitations in continuous SPP fabrication, it may be advantageous in some cases to employ superpositions of HG modes or structured alternatives like vortex arrays which become viable substitutes, as they achieve comparable intrinsic OAM densities despite variations in spatial profiles and mode compositions. This flexibility enables adaptable OAM system design. The R-index thus serves as a fundamental metric for field optimization, enabling performance equivalent substitutions.

Critical Insights

  • Universal purity quantification: The R-index enables direct comparison of OAM content across arbitrary fields, from single vortices to complex superpositions, addressing a longstanding gap in structured light characterization.

  • Phase-imprinting performance validation: By quantifying the beam purity of beams generated by phase manipulation, the R-index provides a tool for optimizing experimental vortex creation methodology. This is particularly crucial for mid-infrared applications where spatial light modulators are unavailable.

  • Design optimization: The metric identifies LG modes as theoretical optima while revealing HG superpositions as viable alternatives when LG generation is impractical, guiding experimental design choices.

Analytical Calculation of the R-index for LG Beams

To analytically corroborate our numerical findings in this section we analytically evaluate the R-index for all Laguerre–Gaussian beams, Eq. (12), with p=0p=0 and arbitrary ll.

The intensity profile of these beams is

I(r)=I0(w0w(z))2(2rw(z))2∣l∣exp⁡(−2r2w(z)2),(17)I(r)=I_0\left(\frac{w_0}{w(z)}\right)^2\left(\frac{\sqrt{2}r}{w(z)}\right)^{2|l|}\exp\left(-\frac{2r^2}{w(z)^2}\right), \tag*{(17)}

with I0=ϵ0cϵ2∣E0∣2I_0=\frac{\epsilon_0 c\epsilon}{2}|E_0|^2, and the phase profile reads

φ=−kr22R(z)−kz+ξ(z)+lϕ.(18)\varphi=-\frac{kr^2}{2R(z)}-kz+\xi(z)+l\phi. \tag*{(18)}

The phase gradient can be analyzed in simple terms when expressed in cylindrical coordinates

∇φ=∂φ∂rr^+1r∂φ∂ϕϕ^+∂φ∂zz^.(19)\nabla\varphi=\frac{\partial\varphi}{\partial r}\hat{r}+\frac{1}{r}\frac{\partial\varphi}{\partial\phi}\hat{\phi}+\frac{\partial\varphi}{\partial z}\hat{z}. \tag*{(19)}

By taking the curl and divergence of each component in the above expression, it is easy to verify that only the azimuthal component is of solenoidal character, fR(r)=lrϕ^\mathbf{f}_{R}(r)=\frac{l}{r}\hat{\phi}. The radial component is irrotational, fIR(r)=−krR(z)r^\mathbf{f}_{IR}(r)=-\frac{kr}{R(z)}\hat{r}, while the zz component does not contribute to F(r)=fIR(r)+fR(r)\mathbf{F}(r)=\mathbf{f}_{IR}(r)+\mathbf{f}_{R}(r) due to its projection on the perpendicular plane, see Eq. (4).

The R-index of Eq. (8) can then be calculated analytically by employing the integral [38]

∫0∞r2ke−2r2w2 dr=(2k)!23k+1k!π2w2k+1,(20)\int_0^\infty r^{2k}e^{-\frac{2r^2}{w^2}}\,dr=\frac{(2k)!}{2^{3k+1}k!}\sqrt{\frac{\pi}{2}}w^{2k+1}, \tag*{(20)}

The numerator straightforwardly evaluates to

∬∣fR(r)∣I(r) dA=π32∣l∣(2∣l∣)!22∣l∣∣l∣!×I0w01+(z/zR)2.(21)\iint|\mathbf{f}_{R}(r)|I(r)\,dA=\sqrt{\frac{\pi^3}{2}}\frac{|l|(2|l|)!}{2^{2|l|}|l|!}\times\frac{I_0w_0}{\sqrt{1+(z/z_R)^2}}. \tag*{(21)}

The integral for ∣fIR(r)∣|\mathbf{f}_{IR}(r)| can also be straightforwardly calculated

∬∣fIR(r)∣I(r) dA=π32(2∣l∣+2)!22∣l∣+2(∣l∣+1)!×I0w01+(z/zR)2zzR.(22)\iint|\mathbf{f}_{IR}(r)|I(r)\,dA=\sqrt{\frac{\pi^3}{2}}\frac{(2|l|+2)!}{2^{2|l|+2}(|l|+1)!}\times\frac{I_0w_0}{\sqrt{1+(z/z_R)^2}}\frac{z}{z_R}. \tag*{(22)}

Therefore, by using Eq. (21) and Eq. (22) the R-index yields

R(z)=(1+2∣l∣+12∣l∣zzR)−1(23)R(z)=\left(1+\frac{2|l|+1}{2|l|}\frac{z}{z_R}\right)^{-1} \tag*{(23)}

This expression reveals that at the focus, z=0z=0, of any Laguerre-Gaussian beam the propagation of light is purely solenoidal and thus a planar probe would identify purely OAM bearing current. However, as the probed plane moves away from the focus the OAM content decreases as the beam diverges. The decrease is more pronounced for beams of smaller ll, e.g. l=1l=1 yields R(z)≈1−32zzRR(z)\approx1-\frac{3}{2}\frac{z}{z_R}, while for larger l≫1l\gg1, the decrease is smoother tending towards R(z)≈1−zzRR(z)\approx1-\frac{z}{z_R}. This behavior independently verifies the numerical results of Table II and can be used for the determination of the ll quantum numbers of beams of low ll.

Conclusion

In this work, we introduced the R-index, a robust metric to quantify the intrinsic OAM content of spatially structured optical fields. It establishes a unified framework for quantifying intrinsic OAM content. By directly measuring the relative intensity-weighted solenoidal energy, the R-index provides a quantitative assessment of mode purity and the fraction of photons available for OAM-mediated interactions, even in complex fields with multiple vortices.

Unlike traditional approaches based on vortex counting or modal decomposition, the R-index decouples beam purity from topological charge and provides a quantitative measure of mode purity. It offers a robust tool for enabling empirical optimization of OAM sources. Our calculations demonstrate its applicability across a range of beam types, including Laguerre-Gaussian, Gaussian, spiral phase plate-generated, and Hermite-Gaussian beams, making it a universal tool for structured light analysis. To our knowledge, this is the first demonstration of a universal OAM quantification method based on a single index, enabling direct comparison of disparate field structures, including LG beams and complex multi-vortex superpositions, on an equal footing. This facilitates the identification of the most OAM-efficient configuration, regardless of field complexity. Future directions include extending the R-index framework to vectorial fields, experimental validation through interferometry or modal decomposition, and exploring its behavior under beam propagation or turbulence.

Acknowledgments

This research was funded in whole or in part by the Austrian Science Fund (FWF) [10.55776/F1004]. For open access purposes, the author has applied a CC BY public copyright license to any author accepted manuscript version arising from this submission.

Data Availability Statement

Data underlying the results presented in this paper are not publicly available at this time but may be obtained from the authors upon reasonable request.

Solenoidal phase gradient magnitudes and R-index values for various SSOFs

This appendix includes the Table 4 providing an extensive array of examples of SSOFs with their associated Jˉs\bar{J}_s and R-index values.

SSOF ProfilePhase DifferenceJˉs\bar{J}_s units of w0−1w_0^{-1}R-indexIntensity Profile
HG3,0+HG0,3HG_{3,0} + HG_{0,3}π/2\pi/21.5490.71!Intensity profile
HG3,0+HG0,3HG_{3,0} + HG_{0,3}π/4\pi/41.5560.62!Intensity profile
HG1,2+HG2,1HG_{1,2} + HG_{2,1}π/2\pi/22.2270.73!Intensity profile
HG1,2+HG2,1HG_{1,2} + HG_{2,1}π/4\pi/41.6360.67!Intensity profile
HG1,3+HG3,1HG_{1,3} + HG_{3,1}π/4\pi/41.6430.67!Intensity profile
HG1,3+HG3,1HG_{1,3} + HG_{3,1}π/3\pi/31.6430.75!Intensity profile
HG2,4+HG4,2HG_{2,4} + HG_{4,2}π/2\pi/22.6650.69!Intensity profile
HG2,4+HG4,2HG_{2,4} + HG_{4,2}π/4\pi/42.6360.61!Intensity profile
HG2,4+HG4,2HG_{2,4} + HG_{4,2}π/3\pi/32.6470.65!Intensity profile
HG3,2+HG2,3HG_{3,2} + HG_{2,3}π/2\pi/22.8400.74!Intensity profile
HG3,2+HG2,3HG_{3,2} + HG_{2,3}π/4\pi/42.8220.64!Intensity profile
HG3,4+HG4,3HG_{3,4} + HG_{4,3}π/2\pi/23.3200.74!Intensity profile

Table 4. Same as Table III but for an extended selection of Hermite-Gaussian superpositions.

References

References

  1. [1]L. Allen, M. W. Beijersbergen, R. J. C. Spreeuw, and J. P. Woerdman, Orbital angular momentum of light and transformation of laguerre-gaussian laser modes, Phys. Rev. A 45, 8185 (1992).
  2. [2]A. E. Willner, H. Huang, Y. Yan, Y. Ren, N. Ahmed, G. Xie, C. Bao, L. Li, Y. Cao, Z. Zhao, J. Wang, M. P. J. Lavery, M. Tur, S. Ramachandran, A. F. Molisch, N. Ashrafi, and S. Ashrafi, Optical communica- tions using orbital angular momentum beams, Adv. Opt. Photon. 7, 66 (2015).
  3. [3]A. M. Yao and M. J. Padgett, Orbital angular momentum: origins, behavior and applications, Adv. Opt. Photon. 3, 161 (2011).DOI
  4. [4]C. Yang, R. Liu, W. Ni, S. Wang, Y. Tian, J. Hou, S. Chen, and P. P. Shum, High-order oam states unwrapping in multiplexed optical links, APL Photonics 8, 056110 (2023).
  5. [5]H. He, M. E. J. Friese, N. R. Heckenberg, and H. Rubinsztein-Dunlop, Direct observation of transfer of angular momentum to absorptive particles from a laser beam with a phase singularity, Phys. Rev. Lett. 75, 826 (1995).
  6. [6]G. Volpe, O. M. Maragò, H. Rubinsztein-Dunlop, G. Pesce, A. B. Stilgoe, and et al., Roadmap for optical tweezers, Journal of Physics: Photonics 5, 022501 (2023).
  7. [7]M. Maslov, G. M. Koutentakis, M. Hrast, O. H. Heckl, and M. Lemeshko, Theory of angular momentum transfer from light to molecules, Phys. Rev. Res. 6, 033277 (2024).DOI
  8. [8]Ruchi, P. Senthilkumaran, and S. K. Pal, Phase singularities to polarization singularities, Int. J. Opt. 2020, 2812803 (2020).DOI
  9. [9]P. Senthilkumaran, Singularities in Physics and Engineering: Properties, Methods, and Applications, 2nd ed., IOP Series in Advances in Optics, Photonics and Optoelectronics (Institute of Physics Publishing, Bristol, UK, 2024).
  10. [10]S. Awasthi and S. Kang, Generation of few μm high optical vortex using tunable spiral plates, Journal of Physics: Photonics 4, 034001 (2022).DOI
  11. [11]C. Rosales-Guzmán, B. Perez-Garcia, and M. A. Cox, The compact cookbook of structured modes of light, Journal of Physics: Photonics 6, 043004 (2024).
  12. [12]D. Andrews, L. Romero, and M. Babiker, On optical vortex interactions with chiral matter, Opt. Commun. 237, 133 (2004).DOI
  13. [13]M. Babiker, C. R. Bennett, D. L. Andrews, and L. C. Dávila Romero, Orbital angular momentum exchange in the interaction of twisted light with molecules, Phys. Rev. Lett. 89, 143601 (2002).pubmed.ncbi.nlm.nih.gov/12366045
  14. [14]D. L. Andrews and M. Babiker, eds., The Angular Momentum of Light (Cambridge University Press, 2012).
  15. [15]K. A. Forbes and D. L. Andrews, Orbital angular momentum of twisted light: chirality and optical activity, Journal of Physics: Photonics 3, 022007 (2021).DOI
  16. [16]Z. Y. Zhou, Y. Li, D. S. Ding, B. S. Shi, and G. C. Guo, Orbital angular momentum photonic quantum interface, Light Sci. Appl. 5, e16019 (2016).DOI
  17. [17]G. Molina-Terriza, J. P. Torres, and L. Torner, Twisted photons, Nat. Phys. 3, 305 (2007).
  18. [18]M. Babiker, C. R. Bennett, D. L. Andrews, and L. C. Dávila Romero, Orbital angular momentum exchange in the interaction of twisted light with molecules, Phys. Rev. Lett. 89, 143601 (2002).pubmed.ncbi.nlm.nih.gov/12366045
  19. [19]K. A. Forbes, Raman optical activity using twisted photons, Phys. Rev. Lett. 122, 103201 (2019).DOI
  20. [20]S. M. Lloyd, M. Babiker, and J. Yuan, Interaction of electron vortices and optical vortices with matter and processes of orbital angular momentum exchange, Phys. Rev. A 86, 023816 (2012).DOI
  21. [21]C. Schmiegelow, J. Schulz, H. Kaufmann, T. Ruster, U. Poschinger, and F. Schmidt-Kaler, Transfer of optical orbital angular momentum to a bound electron, Nat. Commun. 7, 12998 (2016).DOI
  22. [22]K. Y. Bliokh and F. Nori, Transverse and longitudinal angular momenta of light, Phys. Rep. 592, 1 (2015), transverse and longitudinal angular momenta of light.DOI
  23. [23]A. Bekshaev, K. Y. Bliokh, and M. Soskin, Internal flows and energy circulation in light beams, J. Opt. 13, 053001 (2011).DOI
  24. [24]M. V. Berry, Optical currents, J. Opt. A: Pure Appl. Opt. 11, 094001 (2009).DOI
  25. [25]K. McDonald, Orbital and spin angular momentum of electromagnetic fields (2015).
  26. [26]M. Born, E. Wolf, A. B. Bhatia, P. C. Clemmow, D. Gabor, A. R. Stokes, A. M. Taylor, P. A. Wayman, and W. L. Wilcock, Principles of Optics: Electromagnetic Theory of Propagation, Interference and Diffraction of Light, 7th ed. (Cambridge University Press, 1999).
  27. [27]M. Bahl and P. Senthilkumaran, Helmholtz hodge decomposition of scalar optical fields, J. Opt. Soc. Am. A 29, 2421 (2012).DOI
  28. [28]J. Ku and L. Reichel, A novel iterative method for discrete helmholtz decomposition, Appl. Numer. Math. 151, 161 (2020).DOI
  29. [29]J. C. Light and T. Carrington Jr., Discrete-variable representations and their utilization, in Advances in Chemical Physics (John Wiley & Sons, Ltd, 2000) pp. 263–310.DOI
  30. [30]U. Schumann and R. A. Sweet, Fast fourier transforms for direct solution of poisson’s equation with staggered boundary conditions, J. Comp. Phys. 75, 123 (1988).DOI
  31. [31]J. Yang, Z. Wang, J. Song, R. Lv, X. Wang, J. Zhu, and Z. Wei, Diode-pumped 10 μm femtosecond yb:calgo laser with high beam quality, High Power Laser Sci. Eng. 9, e33 (2021).DOI
  32. [32]Y. Yang, D. Li, Y. Zhang, P. Li, Y. Wu, P. Yan, M. Gong, and Q. Xiao, 3 kw narrow-linewidth linearly polarized fiber laser with high-purity single-mode output and high power enabled by suppressing mode and polarization coupling, Opt. Laser Technol. 186, 112729 (2025).DOI
  33. [33]K. Sueda, G. Miyaji, N. Miyanaga, and M. Nakatsuka, Laguerre-gaussian beam generated with a multilevel spiral phase plate for high intensity laser pulses, Opt. Express 12, 3548 (2004).
  34. [34]E. Karimi, G. Zito, B. Piccirillo, L. Marrucci, and E. Santamato, Hypergeometric-gaussian modes, Opt. Lett. 32, 3053 (2007).DOI
  35. [35]J. M. Andersen, S. N. Alperin, A. A. Voitiv, W. G. Holtzmann, J. T. Gopinath, and M. E. Siemens, Characterizing vortex beams from a spatial light modulator with collinear phase-shifting holography, Appl. Opt. 58, 404 (2019).DOI
  36. [36]T. Ohtomo, S.-C. Chu, and K. Otsuka, Generation of vortex beams from lasers with controlled hermite- and ince-gaussian modes, Opt. Express 16, 5082 (2008).
  37. [37]S.-C. Chu, Y.-T. Chen, K.-F. Tsai, and K. Otsuka, Generation of high-order hermite-gaussian modes in end-pumped solid-state lasers for square vortex array laser beam generation, Opt. Express 20, 7128 (2012).DOI
  38. [38]D. Zwillinger, V. Moll, I. Gradshteyn, and I. Ryzhik, Table of Integrals, Series, and Products (Eighth Edition), eighth edition ed. (Academic Press, Boston, 2014).

Paper details

vlnc:W_naxms8yx
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents