betaFeedback

WorksPhysics and Astronomy

Non-uniform magnetization profile in ferromagnetic heterostructures leading to topological Hall effect like signatures

Abstract

Anomalous Hall effect (AHE), which arises when a current is passed through a ferromagnetic material subjected to a perpendicular magnetic field, is proportional to the magnetization of the sample.Additional hump-like features in AHE are often attributed to the presence of non trivial spin textures leading to topological Hall effect (THE). However, several recent reports have emphasized in context of ferromagnetic SrRuO3_3 based heterostructures that the sample inhomogeneity can also result in THE-like features. In order to investigate this issue in general for any ferromagnetic heterostructure, we have considered a phenomenological model to calculate the changes in the shape of hysteresis loop due to various interfacial effects. These changes in the magnetization have been accounted for by considering that the interdomain magnetic coupling parameter (αα) varies exponentially with the distance from the interface along the growth direction of the heterostructure. In case of symmetric interfaces on both sides of a ferromagnet, we have considered the variation of αα as a Gaussian function. We have found that the additional AHE contribution due to the net change in magnetization in such cases are akin to experimentally observed THE, even though we have not considered any topological quantity explicitly in our model. Thus, we propose another situation with nonuniform magnetization profile that may be used to explain additional features in AHE, which might not necessarily be intrinsic THE.

I Introduction

Transition metal oxides (TMOs) are host of a plethora of collective phenomena such as magnetism, ferroelectricity, metal-insulator transition, unconventional superconductivity, charge ordering, etc[1, 2, 3, 4]. The tremendous advancement in thin film growth technologies over the last two decades have enabled the research community to grow artificial structures of these complex oxides with unit cell precision[5, 6, 7, 8, 9, 10, 11]. Such heterostructuring[9, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25] leads to subtle modifications in spin, charge, orbital, and lattice sectors at the interface, resulting in a variety of emergent magnetic behaviors such as interfacial ferromagnetism, exchange bias, spin spiral magnetic phase, enhanced magnetic ordering temperature, topological Hall effect (THE), etc. THE arises in materials with non-zero scalar spin chirality [χi,j,k=Si⋅(Sj×Sk),Si[\chi_{i,j,k} = \mathbf{S}_i \cdot(\mathbf{S}_j \times\mathbf{S}_k), \mathbf{S}_i denotes localized moment]], which results in an internal fictitious magnetic field due to the real space Berry phase. Since the first report of the observation of THE in MnSi[26], THE has been demonstrated in a variety of systems having chiral spin configurations[27, 28, 29, 30, 31]. As the simultaneous presence of broken inversion symmetry and finite spin orbit coupling (either intrinsic or Rashba-type or both) can lead to a sizeable Dzyaloshinskii-Moriya (D-M) interaction, interfacial engineering of TMOs has become a successful approach to achieve THE[25, 32, 33, 34].

Bulk SrRuO3_3 (SRO) is a metallic ferromagnet with a magnetic transition temperature of 165 K[35]. The origin of THE-like signal in SRO-based heterostructures is under intense scrutiny in recent years[25, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45]. While the origin of this phenomenon has been linked with the stabilization of nontrivial spin textures like skyrmions near the interface[25, 36, 37, 38, 39], another set of studies have emphasized that the sample inhomogeneity gives rise to THE-like features[40, 41, 42, 43, 44]. Since the shape of ferromagnetic hysteresis loop is generally affected due to the electronic, magnetic and structural changes across the interface[46, 47], we have considered another possible scenario with a nonuniform magnetization profile along the growth direction of the heterostructure[48]. We have examined whether layer dependent hysteresis loops in such systems can lead to these THE-like signature without invoking any topological interpretation.

In this work, we have simulated the hysteresis loops using a phenomenological approach for a ferromagnet having layer dependent internal molecular field (we refer one unit cell along the growth direction as ‘layer’ throughout the paper). We have followed the mathematical model of Jiles et al. (Ref. [49]), which was developed to calculate the hysteresis loop for an isotropic ferromagnet. In the simplest form, the effective magnetic field felt by an individual domain within a ferromagnet can be expressed as He=H+αMH_e = H + \alpha M, where HH is the actual magnetic field within the domain and MM represents the total sample magnetization per unit volume. The interdomain coupling is represented by a mean field parameter α\alpha. It is assumed here that the change in the magnetization due to any interfacial effect can be accounted phenomenologically by considering α\alpha to be non-uniform and strongly dependent on the distance (zz) from the interface. For a ferromagnet, having an interface on one side, hysteresis curves have been simulated considering that α\alpha varies exponentially with zz below a critical length scale z0z_0 and it becomes equal to α0\alpha_0 (mean field parameter of an uniformly magnetized ferromagnet) above that. To investigate effect of symmetric interfaces on both sides of a ferromagnet, α\alpha has been considered to vary as a Gaussian function. We have found that the additional AHE, which is proportional to the change in magnetization ΔM\Delta M (defined as the change in magnitude of magnetization between the cases with constant and layer-dependent α\alpha), appears very similar to what have been claimed experimentally as THE signature in several systems.[33, 39, 50, 51, 52, 53].

Details of simulation

Under the assumption of the presence of non-trivial spin textures like skyrmions [25, 36, 37, 38, 39], the Hall resistivity (ρH\rho_H) is expressed as

ρH=ρOHE+ρadditional=ρ0H+ρadditional(1)\rho_H = \rho_{\mathrm{OHE}} + \rho_{\mathrm{additional}} = \rho_0 H + \rho_{\mathrm{additional}} \tag*{(1)}

where ρadditional=ρAHE+ρTHE=RaM+ρTHE\rho_{\mathrm{additional}}=\rho_{\mathrm{AHE}}+\rho_{\mathrm{THE}}=R_aM+\rho_{\mathrm{THE}} with ρOHE\rho_{\mathrm{OHE}}, ρAHE\rho_{\mathrm{AHE}}, ρTHE\rho_{\mathrm{THE}} denoting ordinary Hall effect (OHE), AHE and THE, respectively. ρ0\rho_0, RaR_a are constant and MM is the magnetization.

In case of a heterostructure with nonuniform magnetization along the growth direction, the total magnetization (MM) can be considered as summation of two terms: M′M' (magnetization of a uniform ferromagnet) and ΔM\Delta M (this corresponds to the change in M′M' due to all interfacial effects). In such system, we can also express ρadditional\rho_{\mathrm{additional}} as a combination of two AHE contributions instead of considering any intrinsic THE

ρadditional=RaM′+RaΔM(2)\rho_{\mathrm{additional}} = R_aM' + R_a\Delta M \tag*{(2)}

We have simulated hysteresis loops for MM and M′M' using the method described in Ref. [49], which we briefly discuss here. The magnetization MM is related to the HeH_e and can be written as

M=Msf(He)(3)M = M_{sf}(H_e) \tag*{(3)}

where f(He)f(H_e) is an arbitrary function with the following properties: f→0f \to0 when He=0H_e=0 and f→1f \to1 as He→∞H_e \to\infty. MsM_s is the saturation magnetization. Equation (3) does not consider any hindrance to the change in magnetization such as pinning of domain wall motion; therefore, represents only the anhysteretic magnetization curve (ManM_{an}) of a ferromagnet in reality.

Thus, one may rewrite equation (3) as

Man(He)=Msf(He)(4)M_{an}(H_e) = M_s f(H_e) \tag*{(4)}

Jiles et al.[49] further modelled ManM_{an} by a modified Langevin function[54]

Man(He)=Ms[coth⁡(He/a)−(a/He)](5)M_{an}(H_e) = M_s\left[\coth(H_e/a) - (a/H_e)\right] \tag*{(5)}

The shape of the anhysteretic magnetization is determined by the parameter aa, which has the same dimension as HeH_e.

In presence of an external magnetic field, the size of ferromagnetic domains, which are oriented along the direction of the field, would grow in size. However, pinning sites such as structural imperfections, impurity atoms, etc. disrupt domain wall motion and result in irreversible changes in magnetization curves. The energy loss per unit volume due to the pinning can be represented as (see Ref. 49 for the derivation)

Epin(M)=K∫0MdM′(6)E_{pin}(M) = K \int_{0}^{M} dM' \tag*{(6)}

where KK is a constant and related to the average density of pinning sites, the average pinning energy of all sites for 180° oriented walls and the magnetization density of a domain aligned along the direction of the field.

The magnetization energy is defined as the difference between the ideal, lossless case ∫Man(He)dBe\int M_{an}(H_e)dB_e (BeB_e is the effective magnetic induction) and the loss due to hysteresis K∫dMK\int dM i.e.

∫M dBe=∫Man(He)dBe−K∫dMdBedBe(7)\int M\,dB_e = \int M_{an}(H_e)dB_e - K\int\frac{dM}{dB_e}dB_e \tag*{(7)}

The corresponding differential form of the equation is

M=Man−βKdMdBe(8)M = M_{an} - \beta K\frac{dM}{dB_e} \tag*{(8)}

where β\beta is +1 (-1) for the positive (negative) sweep of HH as the pinning process opposes the direction of the applied field. This is the master equation that we have used to simulate the hysteresis curve. Since both sides of the equation (8) contain MM, we have evaluated first a trial magnetization

M1M_1 as a function of external magnetic field HH by the relation M1(H)=Ms[coth⁡(H/a)−(a/H)]M_1(H) = M_s[\coth(H/a) - (a/H)].

The effective field is treated as He=H+αM1H_e = H + \alpha M_1. We have used equation (5) and 8 sequentially to simulate hysteresis loops. Also, we have considered HeH_e in Gaussian units, hence Be=HeB_e = H_e and so can be written as dMdBe=dMdHe\frac{dM}{dB_e} = \frac{dM}{dH_e}. The derivative of MM with respect to HeH_e has been calculated using the method of finite differences[55]. The parameter aa is taken as 11 through out the paper.

Results and Discussions

We first discuss the results of hysteresis loop simulation for a ferromagnet without any interfacial effects [see inset of Figure 1(a)]. For this, the material has been considered to be consisting of N=100N=100 unit cells along the growth direction. The total magnetization has been evaluated by summing the magnetization of each individual unit cell, characterized by a same constant value of the mean field parameter α=α0\alpha=\alpha_0. Figure 1(a) summarizes the results of simulation for different values of α0\alpha_0 for a fixed value of the parameter K=10K=10. While the remanent magnetization (MRM_R) is independent of α0\alpha_0, the coercive field (HcH_c) decreases with the increase in α0\alpha_0. Moreover, a lower value of α0\alpha_0 generates the typical ‘sigmoid’ type ferromagnetic hysteresis loop, whereas the magnetization approaches to its saturation value very near to the zero field when larger values of α0\alpha_0 (e.g. 500) are considered in our simulation. Thus, the parameter α0\alpha_0 can be tuned to study soft and hard ferromagnets, having same MRM_R. Since the parameter KK represents the energy loss due to all pinning processes, our simulations for a fixed α0\alpha_0 found a decrease in both HcH_c and MRM_R with a lowering of the parameter KK [Fig. 1(b)]. We have also simulated hysteresis with a larger range of HH for much larger values of KK and the results have been shown in the Supplementary Materials.

Simulated hysteresis curves of a uniform ferromagnet

Figure 1. Simulated hysteresis curves of a uniform ferromagnet (without any interface): (a) for different values of α0\alpha_0 keeping K=10K=10, (b) for different values of KK with α0=10\alpha_0=10.

Effect of interface on one side of the ferromagnet

When the ferromagnetic material is grown on a substrate or heterostructured with another compound, the interfacial effects are very likely to affect the ferromagnetic response of the layers near the interface. We take into account such interfacial effects on the ferromagnetic hysteresis by considering that the parameter α\alpha is no longer uniform through out all unit cells along the zz directions. Since interfacial effects very often vary exponentially with the distance from the interface[13, 56, 57], it is reasonable to assume that the α\alpha has the following exponential dependence with the distance from the interface α=α0e(z−z0)/l\alpha= \alpha_0 e^{(z-z_0)/l} for z<z0z < z_0 and α=α0\alpha= \alpha_0 for z>z0z > z_0, where z0z_0 is a critical distance from the interface, above which interfacial effects are insignificant. ll is a parameter with the dimension of the length. The corresponding variation of α\alpha across the ferromagnetic material is plotted in the right panel of Figure 2(a) as a function of the fractional distance from the interface for different values of z0/Lz_0/L (l/L=0.1l/L=0.1 and α0=100\alpha_0=100 were used for these plots).

Modification of ferromagnet hysteresis loop in presence of interfacial effects

Figure 2. Modification of ferromagnet hysteresis loop in presence of interfacial effects. (a) The mean field parameter α\alpha is a considered as function of the distance (zz) from the interface: α=α0e(z−z0)/l\alpha=\alpha_0e^{(z-z_0)/l} for z<z0z<z_0 and α=α0\alpha=\alpha_0 for z>z0z>z_0 (a) α\alpha versus z/Lz/L for several values of z0/Lz_0/L. l/Ll/L is taken as 0.1. Corresponding (b) M/MsM/M_s vs. HH and (c) ΔM/Ms\Delta M/M_s vs. HH for z0/L=0.1z_0/L=0.1, 0.3, 0.5 and 0.7. The dotted and solid line represents field sweep from +H+H to −H-H, and −H-H to +H+H, respectively. Inset in (c) is a magnified view of M/MsM/M_s for z0/L=0.1z_0/L=0.1.

The hysteresis curves for these distance dependent α\alpha with K=10K=10 have been simulated for a ferromagnetic system, consisting of N=100N=100 unit cells, similar to the previously discussed case of a uniform ferromagnet (Figure 1). As expected, the hysteresis loop for the zz-dependent α\alpha looks quite different compared to the case of the uniform ferromagnet [see the right most panel of Figure 2(b)]. As we reduce the extent of interfacial effects by decreasing z0/Lz_0/L, the hysteresis loop gradually becomes similar to the hysteresis of a uniform ferromagnet. This is further evident in Figure 2(c), where the difference (ΔM\Delta M) between the magnetization response of the layer dependent case and the layer independent case have been shown for the same set of z0/Lz_0/L. Though the ΔM/Ms\Delta M/M_s decreases with the reduction of z0/Lz_0/L, the interfacial effect is still prominent even in case of the simulation with z0/L=0.1z_0/L=0.1 [see inset in Figure 2(c)]. The hysteresis in ΔM/Ms\Delta M/M_s (difference between forward and backward field sweep) also increases with z0/Lz_0/L. Our most surprising finding is that these ΔM\Delta M would lead to an extra contribution (=RaΔM=R_a\Delta M in equation (2)) in the Hall effect measurement, which would resemble THE-features, reported in a variety of quantum materials in recent years[33, 39, 45, 50, 51, 52, 53]. Interestingly, the ΔM\Delta M, obtained from our simulations, also varies linearly near H=0H=0 - akin to the linear variation of ρTHE\rho_{THE} observed experimentally[58].

The effect of the parameter ll has been explored with a fixed value of z0/L=0.5z_0/L=0.5 (results are shown in Supplementary Materials). As expected, smaller value of ll would correspond to a stronger interfacial effect, leading to an increase of ΔM/Ms\Delta M/M_s.

We have already demonstrated in context of a uniform ferromagnet (Figure 1(a)) that we can explore both soft and hard ferromagnetic behaviour by changing the parameter α=α0\alpha=\alpha_0. In order to explore how α0\alpha_0 affects the hysteresis loop in presence of interfacial effects, we have simulated magnetization curves considering different values of α0\alpha_0 for z0/L=0.5z_0/L=0.5, l/L=0.5l/L=0.5, and K=10K=10. Clearly, ΔM/Ms\Delta M/M_s is reduced with the lowering of α0\alpha_0 (Figure 3(a)), signifying that the change in the magnetic hysteresis due to interfacial effects would be lower in a hard ferromagnet. The impact of the pinning energy scale on the interfacial effect (ΔM/Ms\Delta M/M_s) has been examined by varying the parameter KK. The outcomes of our simulations with lowering KK have been shown in Figure 3(b) [z0/L=0.5z_0/L=0.5, l/L=0.1l/L=0.1, and α0=100\alpha_0=100]. The hysteresis in ΔM/Ms\Delta M/M_s, which is very strong for the case of K=20K=20, decreases with lowering KK and is completely absent for the K=1K=1 case. Similar behaviors have been observed in ρTHE\rho_{\mathrm{THE}} vs. HH measurements at different TT for SrRuO3_3 [34, 59].

Difference between magnetization with and without interfacial effects

Figure 3. Difference between magnetization with and without interfacial effects ΔM/Ms\Delta M/M_s versus HH (a) for several values of α0\alpha_0 with z0/L=0.5z_0/L=0.5, l/L=0.5l/L=0.5 and K=100K=100; (b) for several values of KK with z0/L=0.5z_0/L=0.5, l/L=0.1l/L=0.1 and α0=100\alpha_0=100. The dotted and solid line represents field sweep from +H+H to −H-H, and −H-H to +H+H, respectively.

Effect of interfaces on both sides of the ferromagnet

So far, we have investigated hysteresis of a ferromagnet with interfacial effects on one side while the other side retains it’s bulk-like interdomain magnetic coupling parameter. The inversion symmetry is broken in such a heterostructure, which can lead to finite D-M interaction. Since the net D-M interaction would vanish in case of a ferromagnet having interface on both sides, the possibilities of getting THE-like features has been also examined in SrRuO3_3-based heterostructures with such symmetric interfaces[58, 60]. To explore the modification of hysteresis loop in such an artificial structure (see middle panel of Figure 4(a)), we have considered the variation of α\alpha as a Gaussian function, where the centre of the ferromagnetic compound is taken as the z=0z=0 reference point. The variations of α=α0e−(z−z0)2/l′\alpha=\alpha_0e^{-(z-z_0)^2/l'} for different values of l′l' and α0=100\alpha_0=100 have been shown in left panel of Figure 4(a). The corresponding variations of ΔM/Ms\Delta M/M_s are shown in Figure 4(b). Changes in magnetization due to interfacial effects are enhanced with the lowering of the parameter l′l'. overall behavior of ΔM/Ms\Delta M/M_s vs. HH is very similar to the previously discussed ferromagnet having interfacial changes on one side. We also consider a possible scenario where α\alpha is enhanced towards the interface [α=α0+α0(1−e−(z−z0)2/l′)\alpha= \alpha_0 + \alpha_0(1-e^{-(z-z_0)^2/l'})]. The sign of ΔM/Ms\Delta M/M_s is reversed compared to the previous case (Figure 4(c)). Thus, our model predicts that THE-like features can be observed in a heterostructure with symmetric interfaces as well due to the layer dependent interdomain magnetic coupling even though the net D-M interaction is zero.

Difference between magnetization with and without interfacial effects

Figure 4. Difference between magnetization with and without interfacial effects ΔM/Ms\Delta M/M_s versus HH for l/L=0.1l/L=0.1, 0.3, 0.5 and 0.7, keeping z0/L=0.5z_0/L=0.5. Inset: α\alpha versus z/Lz/L for the corresponding values of ll. The dotted and solid line in (b) and (c) represents field sweep from +H+H to −H-H, and −H-H to +H+H, respectively.

We also note that the observed maximum magnitude of topological Hall resistivity in experiment is around one order of magnitude smaller compared to the maximum magnitude of anomalous Hall resistivity[37, 58]. Although we have not explicitly calculated resistivity here, the relative magnitudes of the extra AHE (∝ΔM\propto\Delta M) and the AHE (∝M\propto M) component in present case can be used for the comparison. With the ranges of parameters we have explored in this paper, we have found that the maximum of ΔM/Ms\Delta M/M_s is around one order of magnitude smaller compared to the maximum of M/MsM/M_s as well.

Conclusion

To summarize, motivated by several recent experimental papers on SrRuO3_3 based heterostructures that claim that additional features in AHE that are often attributed to THE may not necessarily be a result of non trivial spin textures and may arise from an inhomogeneity in the ferromagnetic structure[40, 41, 42, 43, 44], we have developed a simple model to investigate changes in ferromagnetic hysteresis loop due to interfacial effects. Within the formalism of a phenomenological approach, developed by Jiles et al.[49], we have considered that the strength of the interdomain magnetic coupling parameter within the ferromagnetic material as a function of the distance from the interface. The resultant change in magnetization, obtained from our simulations, would lead to an additional contribution in AHE, which resembles experimental aspects of THE seen in several cases. While we do not claim that all experimental reports of THE in oxide heterostructures can be accounted by multi-channel AHE due to layer dependent hysteresis, we want to emphasize that such possibility must be examined before assigning these additional features in AHE to non trivial spin textures. Though we have discussed about interfacial effects in oxide heterostructure only in this paper, our present model is very general and can be applied for any heterostructure consisting of elemental ferromagnets, chalcogenides, heavy fermions etc.

See the supplementary material for simulations with larger range of HH, and the effect of the parameter l/Ll/L in the case of simulations having interfacial effects on one side.

Acknowledgements

We thank Shashank Kumar Ojha and Prithwijit Mandal for insightful comments about this paper. SM acknowledges financial supports from DST Nanomission grant (Grant No. DST/NM/NS/2018/246) and Infosys Foundation, Bangalore.

References

Supplementary Materials

Hysteresis simulation with a larger range of HH

We have simulated hysteresis for a uniformly magnetized ferromagnet with larger range of HH by considering a=1100a=1100 (Figure S1).

Simulated hysteresis curves of a uniform ferromagnet for different values of $K$

Figure S1. Simulated hysteresis curves of a uniform ferromagnet (without any interface) for different values of KK keeping α0=1\alpha_0=1, for higher values of HH.

Role of the parameter l/Ll/L

For the case of the ferromagnet having interfacial effects on one side, we have plotted the ΔM/Ms\Delta M/M_s curves for various values of z0/Lz_0/L in Figure 3 of main text. Another parameter that affects the exponential nature of α\alpha is ll. We expect to have similar trends in the plots of ΔM/Ms\Delta M/M_s if we consider different values of ll. The results of the simulations with different values of l/Ll/L are shown in Figure S2.

Modification of ferromagnet hysteresis loop in presence of interfacial effects

Figure S2. Modification of ferromagnet hysteresis loop in presence of interfacial effects. The mean field parameter α\alpha is considered as a function of the distance (zz) from the interface: α=α0e(z−z0)/l\alpha= \alpha_0 e^{(z-z_0)/l} for z<z0z < z_0 and α=α0\alpha= \alpha_0 for z>z0z > z_0, ΔM/Ms\Delta M/M_s vs. HH for l/L=0.7l/L = 0.7, 0.50.5, 0.30.3 and 0.10.1, inset: α\alpha versus z/Lz/L for several values of l/Ll/L. z0/Lz_0/L is taken as 0.50.5.

References

  1. [1]M. Imada, A. Fujimori, and Y. Tokura, Rev. Mod. Phys. 70, 1039 (1998).
  2. [2]Y. Tokura, Reports on Progress in Physics 69, 797 (2006).
  3. [3]B. Keimer, S. A. Kivelson, M. R. Norman, S. Uchida, and J. Zaanen, Nature 518, 179 (2015).
  4. [4]N. P. Armitage, P. Fournier, and R. L. Greene, Rev. Mod. Phys. 82, 2421 (2010).
  5. [5]D. G. Schlom, L.-Q. Chen, X. Pan, A. Schmehl, and M. A. Zurbuchen, Journal of the American Ceramic Society 91, 2429 (2008).
  6. [6]P. Zubko, S. Gariglio, M. Gabay, P. Ghosez, and J.-M. Triscone, Annual Review of Condensed Matter Physics 2, 141 (2011), https://doi.org/10.1146/annurev-conmatphys-062910-140445.
  7. [7]H. Y. Hwang, Y. Iwasa, M. Kawasaki, B. Keimer, N. Nagaosa, and Y. Tokura, Nature Mater. 11, 103 (2012).
  8. [8]J. Chakhalian, J. W. Freeland, A. J. Millis, C. Panagopoulos, and J. M. Rondinelli, Rev. Mod. Phys. 86, 1189 (2014).
  9. [9]A. Bhattacharya and S. J. May, Annual Review of Materials Research 44, 65 (2014), http://dx.doi.org/10.1146/annurev-matsci-070813-113447.
  10. [10]S. Stemmer and S. James Allen, Annual Review of Materials Research 44, 151 (2014).
  11. [11]S. Middey, J. Chakhalian, P. Mahadevan, J. W. Freeland, A. J. Millis, and D. D. Sarma, Annual Review of Materials Research 46, 305 (2016).
  12. [12]F. Hellman, A. Hoffmann, Y. Tserkovnyak, G. S. D. Beach, E. E. Fullerton, C. Leighton, A. H. Mac-Donald, D. C. Ralph, D. A. Arena, H. A. Dürr, P. Fischer, J. Grollier, J. P. Heremans, T. Jungwirth, A. V. Kimel, B. Koopmans, I. N. Krivorotov, S. J. May, A. K. Petford-Long, J. M. Rondinelli, N. Samarth, I. K. Schuller, A. N. Slavin, M. D. Stiles, O. Tchernyshyov, A. Thiaville, and B. L. Zink, Rev. Mod. Phys. 89, 025006 (2017).
  13. [13]J. Chakhalian, J. W. Freeland, G. Srajer, J. Strempfer, G. Khaliullin, J. C. Cezar, T. Charlton, R. Dal-gliesh, C. Bernhard, G. Cristiani, H. U. Habermeier, and B. Keimer, Nat Phys 2, 244 (2006).
  14. [14]J. Chakhalian, J. W. Freeland, H.-U. Habermeier, G. Cristiani, G. Khaliullin, M. van Veenendaal, and B. Keimer, Science 318, 1114 (2007), http://www.sciencemag.org/content/318/5853/1114.full.pdf.
  15. [15]A. Brinkman, M. Huijben, M. van Zalk, J. Huijben, U. Zeitler, J. C. Maan, W. G. van der Wiel, G. Rijnders, D. H. A. Blank, and H. Hilgenkamp, Nature Materials 6, 493 (2007).
  16. [16]S. J. May, P. J. Ryan, J. L. Robertson, J.-W. Kim, T. S. Santos, E. Karapetrova, J. L. Zarestky, X. Zhai, S. G. E. te Velthuis, J. N. Eckstein, S. D. Bader, and A. Bhattacharya, Nature Materials 8, 892 (2009).
  17. [17]A. V. Boris, Y. Matiks, E. Benckiser, A. Frano, P. Popovich, V. Hinkov, P. Wochner, M. Castro-Colin, E. Detemple, V. K. Malik, C. Bernhard, T. Prokscha, A. Suter, Z. Salman, E. Morenzoni, G. Cristiani, H.-U. Habermeier, and B. Keimer, Science 332, 937 (2011), http://www.sciencemag.org/content/332/6032/937.full.pdf.
  18. [18]C. He, A. J. Grutter, M. Gu, N. D. Browning, Y. Takamura, B. J. Kirby, J. A. Borchers, J. W. Kim, M. R. Fitzsimmons, X. Zhai, V. V. Mehta, F. J. Wong, and Y. Suzuki, Phys. Rev. Lett. 109, 197202 (2012).
  19. [19]M. Gibert, P. Zubko, R. Scherwitzl, J. Iniguez, and J.-M. Triscone, Nat Mater 11, 195 (2012).
  20. [20]A. J. Grutter, H. Yang, B. J. Kirby, M. R. Fitzsimmons, J. A. Aguiar, N. D. Browning, C. A. Jenkins, E. Arenholz, V. V. Mehta, U. S. Alaan, and Y. Suzuki, Phys. Rev. Lett. 111, 087202 (2013).
  21. [21]E. J. Moon, R. Colby, Q. Wang, E. Karapetrova, C. M. Schlepütz, M. R. Fitzsimmons, and S. J. May, Nature Communications 5 (2014), 10.1038/ncomms6710.
  22. [22]J. D. Hoffman, B. J. Kirby, J. Kwon, G. Fabbris, D. Meyers, J. W. Freeland, I. Martin, O. G. Heinonen, P. Steadman, H. Zhou, C. M. Schlepütz, M. P. M. Dean, S. G. E. te Velthuis, J.-M. Zuo, and A. Bhattacharya, Phys. Rev. X 6, 041038 (2016).
  23. [23]R. K. Patel, D. Meyers, X. Liu, P. Mandal, M. Kareev, P. Shafer, J.-W. Kim, P. J. Ryan, S. Middey, and J. Chakhalian, APL Materials 8, 041113 (2020), https://doi.org/10.1063/5.0004530.
  24. [24]D. Yi, J. Liu, S.-L. Hsu, L. Zhang, Y. Choi, J.-W. Kim, Z. Chen, J. D. Clarkson, C. R. Serrao, E. Arenholz, P. J. Ryan, H. Xu, R. J. Birgeneau, and R. Ramesh, Proceedings of the National Academy of Sciences 113, 6397 (2016).
  25. [25]J. Matsuno, N. Ogawa, K. Yasuda, F. Kagawa, W. Koshibae, N. Nagaosa, Y. Tokura, and M. Kawasaki, Science Advances 2, e1600304 (2016).
  26. [26]A. Neubauer, C. Pfleiderer, B. Binz, A. Rosch, R. Ritz, P. G. Niklowitz, and P. Böni, Phys. Rev. Lett. 102, 186602 (2009).
  27. [27]N. Kanazawa, Y. Onose, T. Arima, D. Okuyama, K. Ohoyama, S. Wakimoto, K. Kakurai, S. Ishiwata, and Y. Tokura, Phys. Rev. Lett. 106, 156603 (2011).
  28. [28]C. Sürgers, G. Fischer, P. Winkel, and H. v. Löhneysen, Nature Communications 5 (2014), 10.1038/ncomms4400.
  29. [29]T. Kurumaji, T. Nakajima, M. Hirschberger, A. Kikkawa, Y. Yamasaki, H. Sagayama, H. Nakao, Y. Taguchi, T. hisa Arima, and Y. Tokura, Science 365, 914 (2019).
  30. [30]C. Liu, Y. Zang, W. Ruan, Y. Gong, K. He, X. Ma, Q.-K. Xue, and Y. Wang, Phys. Rev. Lett. 119, 176809 (2017).
  31. [31]S. K. Ojha, S. K. Gogoi, M. M. Patidar, R. K. Patel, P. Mandal, S. Kumar, R. Venkatesh, V. Ganesan, M. Jain, and S. Middey, Advanced Quantum Technologies 3, 2000021 (2020).
  32. [32]L. Vistoli, W. Wang, A. Sander, Q. Zhu, B. Casals, R. Cichelero, A. Barthélémy, S. Fusil, G. Herranz, S. Valencia, R. Abrudan, E. Weschke, K. Nakazawa, H. Kohno, J. Santamaria, W. Wu, V. Garcia, and M. Bibes, Nature Physics 15, 67 (2018).
  33. [33]Q. Shao, Y. Liu, G. Yu, S. K. Kim, X. Che, C. Tang, Q. L. He, Y. Tserkovnyak, J. Shi, and K. L. Wang, Nature Electronics 2, 182 (2019).
  34. [34]E. Skoropata, J. Nichols, J. M. Ok, R. V. Chopdekar, E. S. Choi, A. Rastogi, C. Sohn, X. Gao, S. Yoon, T. Farmer, R. D. Desautels, Y. Choi, D. Haskel, J. W. Freeland, S. Okamoto, M. Brahlek, and H. N. Lee, Science Advances 6, eaaz3902 (2020).
  35. [35]G. Cao, S. McCall, M. Shepard, J. E. Crow, and R. P. Guertin, Phys. Rev. B 56, 321 (1997).
  36. [36]Y. Ohuchi, J. Matsuno, N. Ogawa, Y. Kozuka, M. Uchida, Y. Tokura, and M. Kawasaki, Nature Communications 9 (2018), 10.1038/s41467-017-02629-3.
  37. [37]L. Wang, Q. Feng, Y. Kim, R. Kim, K. H. Lee, S. D. Pollard, Y. J. Shin, H. Zhou, W. Peng, D. Lee, W. Meng, H. Yang, J. H. Han, M. Kim, Q. Lu, and T. W. Noh, Nature Materials 17, 1087 (2018).
  38. [38]Q. Qin, L. Liu, W. Lin, X. Shu, Q. Xie, Z. Lim, C. Li, S. He, G. M. Chow, and J. Chen, Advanced Materials 31, 1807008 (2019).
  39. [39]K.-Y. Meng, A. S. Ahmed, M. Bácani, A.-O. Mandru, X. Zhao, N. Bagués, B. D. Esser, J. Flores, D. W. McComb, H. J. Hug, and F. Yang, Nano Letters 19, 3169 (2019).
  40. [40]D. Kan, T. Moriyama, K. Kobayashi, and Y. Shimakawa, Phys. Rev. B 98, 180408 (2018).
  41. [41]L. Wu, F. Wen, Y. Fu, J. H. Wilson, X. Liu, Y. Zhang, D. M. Vasiukov, M. S. Kareev, J. H. Pixley, and J. Chakhalian, Physical Review B 102, 220406 (2020).
  42. [42]G. Kimbell, P. M. Sass, B. Woltjes, E. K. Ko, T. W. Noh, W. Wu, and J. W. A. Robinson, Phys. Rev. Materials 4, 054414 (2020).
  43. [43]L. Wang, Q. Feng, H. G. Lee, E. K. Ko, Q. Lu, and T. W. Noh, Nano Letters 20, 2468 (2020).
  44. [44]L. Wysocki, L. Yang, F. Gunkel, R. Dittmann, P. H. M. van Loosdrecht, and I. Lindfors-Vrejoiu, Phys. Rev. Materials 4, 054402 (2020).
  45. [45]D. J. Groenendijk, C. Autieri, T. C. van Thiel, W. Brzezicki, J. Hortensius, D. Afanasiev, N. Gauquelin, P. Barone, K. van den Bos, S. van Aert, et al., Physical Review Research , 023404 (2020).
  46. [46]A. Alberca, N. M. Nemes, F. J. Mompean, N. Biskup, A. de Andres, C. Munuera, J. Tornos, C. Leon, A. Hernando, P. Ferrer, G. R. Castro, J. Santamaria, and M. Garcia-Hernandez, Phys. Rev. B 84, 134402 (2011).
  47. [47]F. Y. Bruno, J. Garcia-Barriocanal, M. Varela, N. M. Nemes, P. Thakur, J. C. Cezar, N. B. Brookes, A. Rivera-Calzada, M. Garcia-Hernandez, C. Leon, S. Okamoto, S. J. Pennycook, and J. Santamaria, Phys. Rev. Lett. 106, 147205 (2011).
  48. [48]S. Singh, M. R. Fitzsimmons, T. Lookman, J. D. Thompson, H. Jeen, A. Biswas, M. A. Roldan, and M. Varela, Phys. Rev. Lett. 108, 077207 (2012).
  49. [49]D. Jiles and D. Atherton, Journal of Magnetism and Magnetic Materials 61, 48 (1986).
  50. [50]Z. Liu, A. Burigu, Y. Zhang, H. M. Jafri, X. Ma, E. Liu, W. Wang, and G. Wu, Scripta Materialia 143, 122 (2018).
  51. [51]W. Wang, Y.-F. Zhao, F. Wang, M. W. Daniels, C.-Z. Chang, J. Zang, D. Xiao, and W. Wu, Nano letters 21, 1108 (2021).
  52. [52]Y. Li, L. Zhang, Q. Zhang, C. Li, T. Yang, Y. Deng, L. Gu, and D. Wu, ACS applied materials & interfaces 11, 21268 (2019).
  53. [53]Y. Yun, Y. Ma, T. Su, W. Xing, Y. Chen, Y. Yao, R. Cai, W. Yuan, and W. Han, Phys. Rev. Materials 2, 034201 (2018).
  54. [54]P. Langevin, Ann. chim. et phys. , 203 (1905).
  55. [55]Z. Li, Z. Qiao, and T. Tang, Numerical solution of differential equations: introduction to finite difference and finite element methods (Cambridge University Press, 2017).
  56. [56]A. Ohtomo, D. A. Muller, J. L. Grazul, and H. Y. Hwang, Nature 419, 378 (2002).
  57. [57]Y. Liu and X. Ke, ChemInform 46, 373003 (2015).
  58. [58]W. Wang, M. W. Daniels, Z. Liao, Y. Zhao, J. Wang, G. Koster, G. Rijnders, C.-Z. Chang, D. Xiao, and W. Wu, Nature materials 18, 1054 (2019).
  59. [59]S. D. Seddon, D. E. Dogaru, S. J. R. Holt, D. Rusu, J. J. P. Peters, A. M. Sanchez, and M. Alexe, Nature Communications 12 (2021), 10.1038/s41467-021-22165-5.
  60. [60]L. Yang, L. Wysocki, J. Schöpf, L. Jin, A. Kovács, F. Gunkel, R. Dittmann, P. H. M. van Loosdrecht, and I. Lindfors-Vrejoiu, Phys. Rev. Materials 5, 014403 (2021).

Paper details

vlnc:W_nd5ba5z8
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents