betaFeedback

WorksPhysics and Astronomy

Contact Angle Hysteresis on Rough Surfaces Part I: Mechanical Energy Balance Framework

Abstract

Using as a starting point conservation of momentum, a multiphase mechanical energy balance equation is derived that accounts for multiple material phases and interfaces present within a moving control volume. This balance is applied to a control volume that is anchored to a three phase contact line as it advances over the surface of a rough and chemically homogeneous solid. Using semi-quantitative models for the material behaviour occurring within the control volume, an order-of-magnitude analysis is performed to find what terms within the balance are significant, producing an equation that can be used to predict contact angle hysteresis from a knowledge of interface dynamics occurring around the three phase contact line. In addition to this equation, the theory also answers several questions that have been discussed within the wetting literature: Namely that (static) contact angle hysteresis is a function of conditions around the three phase contact line, as opposed to the surrounding flow system; That contact angle hysteresis results from interface `jumps' that dissipate energy, rather than directly from contact line deformation; That interfacial dynamics is required to predict contact angle hysteresis, but that these dynamics should be interpreted via energy conservation, and; That dynamic contact angles depend on kinetic energy transport around the three phase contact line, as well as local energy dissipation. The framework has been derived using assumptions of incompressible Newtonian fluids, reversible interface formation and zero-strain solids – future work could relax these assumptions to make the theory more generally applicable.

Banner appropriate to article type will appear here in typeset article

Introduction

The ability of a liquid to ‘wet’ a solid is described by the angle that the liquid makes with the solid when the interface is stationary — the static contact angle. For a liquid in contact with an ideal, smooth and chemically homogeneous surface, this angle θe\theta_{\mathrm{e}} is unique and given by Young’s Equation. Real surfaces, which are often rough on a variety of length scales, are chemically heterogeneous and/or involve some type of irreversible work of adhesion, display a range of equilibrium contact angles: The maximum is the static advancing angle

Abstract must not spill onto p.2 θa\theta_a, above will the interface will advance, and the minimum the static receding angle, θr\theta_r, below which it will recede. The difference between these two angles is defined as the range of contact angle hysteresis (CAH). CAH, θa\theta_a and θr\theta_r are critical wetting parameters that determine (for example) how easily drops can move over solid surfaces, under what conditions liquid films will smoothly coat surfaces or whether gas injection will aid particle floatation. Technologies that depend on CAH angles include established processes such as industrial separation devices or the wetting behaviour of fabrics, through to more novel processes such as transparent self-cleaning surfaces for solar power generation or low-energy liquid fuel separation membranes [7, 43, 22] (Cassie & Baxter 1944; Wu et al. 2002; Callies & Quéré 2005). For the design and optimisation of these processes general and validated wetting theories are needed that can predict the CAH range. However, as highlighted via several recent works such theories are not yet available, with fundamental questions remaining about the nature of the wetting process [15] (Eral et al. 2013; Butt et al. 2022). The purpose of this study is to derive an energy conservation framework that can be applied to predict CAH angles.

The early energy-based wetting theories of Wenzel and Cassie remain influential in interpreting wetting phenomena. Considering the energy change that occurs as a liquid/gas interface advances a small distance over the surface of a rough solid, Wenzel [45] proposed that the apparent contact angle is related to the roughness rr of the surface, defined as the total to projected surface area ratio (see § 4.1). In deriving this theory, Wenzel assumed that the liquid completely wets each surface undulation. Cassie & Baxter (1944) recognised that such ‘complete’ wetting did not necessarily occur, and derived an expression for the apparent contact angle on a partially wet surface in terms of the wetted and non-wetted liquid areas per projected solid area, being f1f_1 and f2f_2, respectively (see § 4.1). The Wenzel and Cassie & Baxter equations are useful for understanding and interpreting experimental data, however, theories based solely on these concepts (e.g. Bico et al. 2002; Patankar 2003) are not predictive as the proportion of solid surface wetted by a liquid is not known a priori. Also, these theories give only one static contact angle for a rough structured surface, rather than the CAH range that is observed experimentally.

Another series of works is based on the concept of energy minimisation of an entire drop sitting on a rough surface. Johnson Jr & Dettre [17] computed the free energy of drops residing at the centre of concentric sinusoidal roughness rings, showing that the energy of the system oscillated as the drop volume increased and the interface advanced over each ring. They interpreted the amplitude of these energy oscillations as energy barriers that must be overcome by macroscopic vibrational energy to allow interface movement, implying that as the height of surface roughness decreases, the range of CAH should also decrease. This conclusion is contrary to experimental evidence however which shows that roughness-induced CAH strongly depends on surface topology (relative shape), rather than absolute roughness size, provided that gravitational and Laplace pressure effects can be neglected on the lengthscale of the roughness [30, 3, 21, 15]. Other studies have used similar static free-energy minimisation concepts to explain CAH for a variety of periodically shaped surfaces [5, 24, 25] (Brandon et al. 2003), however in general the results do not qualitatively agree with observation. For example, Brandon et al. (2003) used minimal surface energy modelling to show that the apparent contact angle range for a drop on a doubly periodic undulating surface approached a single value (the Cassie angle) as the drop size to roughness ratio increased, again contradicting the above referenced experimental observations that show that the CAH range becomes quite constant at large droplet to roughness size ratios. A related question also remains about these analyses: Is it really necessary to consider the energy of the entire flow system (most commonly a droplet) to calculate the CAH range, or is it instead a property associated with the three phase contact line (TPCL) that can be applied to a wide variety of surrounding flow systems? This is an unresolved question that has garnered conflicting opinions [26, 29, 32, 25] (Gao & McCarthy 2007; Gao & McCarthy 2007).

Other studies conclude that CAH is substantially a property of the TPCL region[29, 32] and that CAH has its origin in the energy dissipation that occurs around the TPCL as it advances over the rough solid. Central to this concept is that the advancing and receding angles are defined as those measured while the interface is moving (albeit at a vanishingly slow velocity) rather than being determined solely by static thermodynamic states. An influential study in this vein is Joanny & de Gennes [16] who proposed a model for CAH on a surface that contains a dilute number of ‘strong defects’ as a model for surface contamination or dilutely distributed surface roughness. The theory considered the ‘pinning’ and subsequent ‘depinnning’ or ‘jumping’ of the contact line as it advanced over a surface, assuming that during each interface jump surface potential energy is dissipated to heat. Joanny & de Gennes calculated this energy dissipation amount under ideal conditions and incorporated it into an equation for CAH relevant to dilute defect surfaces. More recent works have experimentally observed the pinning/depinnning behaviour of the fluid interface near the TPCL[15, 37, 9]. Other studies have used a variety of energy conservation principles to extend Joanny & de Gennes’s work to periodic surfaces[40, 15] (Butt et al. 2017) or interpreted measurements of CAH in terms contact line energy dissipation and interfacial ‘jumping’ dynamics[38, 39, 3, 42]. Despite these successes however questions remain about this conceptual model of CAH; around what specific TPCL region should energy be conserved, how should the energies of real rough surfaces that may contain randomly shaped structures or micro bubbles/droplets be incorporated in the energy analysis, and why must the energy dissipated due to interface jumping dynamics be balanced by only interfacial (rather than material) stress movements?

On a slightly different track Joanny & de Gennes [16]’s work also explored the influence of ’weak’ surface defects on CAH, referring to smooth defects as those that cause the fluid interface near the solid to become distorted, but that do not result in the aforementioned ‘pinning’ and ‘depinnning’ behaviour of the TPCL. Joanny & de Gennes’s conclusion was that isolated weak defects do not generally result in hysteresis, however other works have extended this analysis to conclude that distributions of weak surface heterogeneities can cause CAH[35, 41, 31]. In related work Cox (1983) examined how an interface changes as it moves over a gently undulating sinusoidal periodic rough surface, showing that when the interface moved in the direction of roughness periodicity TPCL ‘jumps’ occurred (i.e., ‘strong’ defects leading to CAH), but when advancing in other directions relative to the periodicity direction the interface moved continuously (i.e., ‘weak’ defects producing no CAH). It should be noted that these theoretical studies predict the possible shapes that a fluid interface can take when passing over arrangements of surface heterogeneities, and from these the range of CAH angles are inferred: In general the link between CAH angles calculated via these interface topology methods and those calculated by energy conservation has not been established.

Reviewing this body of literature key questions about wetting behaviour remain. Specifically there is conjecture regarding how energy conservation, fluid interface distortion and the dynamics of interface ‘jumping’ can be combined to predict CAH. Critically, there is no experimental consensus or fundamental analysis that shows how energy conservation should be applied to predict CAH — works that are based on energy conservation around entire droplets in general do not predict experimentally observed CAH trends, while studies that are based on energy changes around a moving TPCL lack a rigorous energy conservation basis. Further, while many studies do view contact line jumping as a source of CAH (‘strong’ defects), there is confusion over whether fluid interface distortion (‘weak’ defects) in isolation can produce CAH, and how studies that predict CAH angles via interface topology and dynamics can be mathematically related to CAH angles resulting from energy conservation.

This study addresses these questions. Specifically we derive a rigorous energy conservation framework which when applied to the moving TPCL can be used to predict contact angle hysteresis (CAH). We do this by first deriving a general multiphase mechanical energy balance (MMEB) equation that (§ 2) is equivalent to the conventional single phase mechanical energy balance equation but includes terms associated with interfacial stresses acting between each of the material phases. We then apply this MMEB equation to a cylindrical control volume that is anchored to a TPCL as it moves across a rough solid surface at a vanishingly slow speed (§ 3). By adopting order-or-magnitude models that describe how each of the materials behave within the control volume during the advance, we neglect terms that are insignificant to the calculation and derive a resulting energy conservation equation that predicts CAH given knowledge of the interfacial dynamics occurring within the TPCL. A strength of the analysis is that mathematical constraints are derived that determine under what physical conditions the theory will be valid (§ 4), giving insight into past and future modelling theories and experimental wetting studies.

Macroscopic Mechanical Energy Balance for Immiscible Multiphase Mixtures

In this section we derive a macroscopic mechanical energy balance for a moving control volume that contains a number of immiscible phases (see Figure 1). The derivation is similar to that of Bird et al. (2002, p221, §7.8) except that interfacial tension acts at the interface between each pair of phases, and the balance is not specific to Newtonian liquids1.

Image not extracted

Figure 1. The macroscopic mechanical energy balance is performed on a moving control volume that contains multiple immiscible phases bounded by multiple interface types. Each interface type has an associated unit normal vector nS,ij\mathbf{n}_{S,ij} that is directed into phase ii (where i<ji<j). The velocity and outward unit normal of the control volume boundary are vCV\mathbf{v}_{\mathrm{CV}} and nCV\mathbf{n}_{\mathrm{CV}}, respectively. In the indicated configuration four material phases are present within the control volume, and they intersect along four different interface types.

Our starting point is a momentum equation for a mixture of immiscible phases,

∂∂tρv+∇⋅ρvv=∇⋅[TM+TS]+ρg.(1)\frac{\partial}{\partial t}\rho\mathbf{v} + \nabla\cdot\rho\mathbf{v}\mathbf{v} = \nabla\cdot[\mathbf{T}_{\mathrm{M}} + \mathbf{T}_{\mathrm{S}}] + \rho\mathbf{g}. \tag*{(1)}

Here v\mathbf{v} is the local phase velocity (assumed to vary continuously throughout), ρ\rho the local phase density, TM\mathbf{T}_{\mathrm{M}} the local total material stress at any point within any phase and TS\mathbf{T}_{\mathrm{S}} the local surface stress acting on the interfaces between phases. The functional form of the material stress tensor TM(x)\mathbf{T}_{\mathrm{M}}(\mathbf{x}) is a property of the material type present at x\mathbf{x}.

Formally, for equation (2.1) to be valid everywhere within VCVV_{\mathrm{CV}} all terms appearing in the equation must be defined not only within each phase but also on the interfaces between phases. This includes terms such as TM\mathbf{T}_{\mathrm{M}} and ρ\rho that are associated with a particular material type. Such formal definitions could be made; however as equation (2.1) is integrated over space in the following analysis, as long as any phase-specific terms are finite on each interface then their interface values do not affect the final energy balance. Hence, we simply assume that the interface values for TM(x)\mathbf{T}_{\mathrm{M}}(\mathbf{x}) and ρ\rho are finite.

The effects of interfacial tension on material movement are captured using a surface stress tensor, TS(x)\mathbf{T}_{\mathrm{S}}(\mathbf{x}). The form of this tensor is taken from Lafaurie et al. [20], but generalised here to include interfaces between multiple phases;

TS(x)=∑i<jσij(I−nS,ijnS,ij)δS,ij.(2)\mathbf{T}_{S}(\mathbf{x}) = \sum_{i<j} \sigma_{ij}\left(\mathbf{I}-\mathbf{n}_{S,ij}\mathbf{n}_{S,ij}\right)\delta_{S,ij}. \tag*{(2)}

In this equation σij\sigma_{ij} is the constant surface energy per unit area (or interfacial tension) associated with the ‘ijij interface’ (i.e., the interface between phases ii and jj), I\mathbf{I} is the identity tensor, nS,ij\mathbf{n}_{S,ij} is a unit vector directed normal to the ijij interface and into phase ii, and δS,ij\delta_{S,ij} is a ‘surface’ delta function that is nonzero only on the ijij interface. The surface delta function is essentially a multidimensional analogue of the Dirac delta function and has been utilised extensively in the development of computational fluid dynamics methods [20] (Brackbill et al. 1992). In the present context it has the property that

∫VCVδS,ij dV=Aij,(3)\int_{V_{\mathrm{CV}}} \delta_{S,ij}\,\mathrm{d}V = A_{ij}, \tag*{(3)}

where AijA_{ij} is the total area of the ijij interface existing within the control volume VCVV_{\mathrm{CV}}. Further, under conditions where nCV⋅nS,ij\mathbf{n}_{\mathrm{CV}}\cdot\mathbf{n}_{S,ij} is uniform over a particular intersection between a surface SCVS_{\mathrm{CV}} and an interface defined by δS,ij\delta_{S,ij}, the surface integral of the surface delta function is given by

∫ScvδS,ij dS=lij1−(ncv⋅nS,ij)2,(4)\int_{S_{\mathrm{cv}}} \delta_{S,ij}\,dS = \frac{l_{ij}}{\sqrt{1-\left(\mathbf{n}_{\mathrm{cv}}\cdot\mathbf{n}_{S,ij}\right)^2}}, \tag*{(4)}

where lijl_{ij} represents the line length of the intersection between the two surfaces and ncv\mathbf{n}_{\mathrm{cv}} is a unit normal to the surface ScvS_{\mathrm{cv}}. These properties of the surface delta function and others are discussed in more detail in the Appendix A.

Note that in general interfacial stresses will act at each one of the immiscible material boundaries that exist within VcvV_{\mathrm{cv}}. Consequently, the sum in equation (2.2) cycles through all possible phase combinations under the condition that i<ji<j; that is, j=1→mj=1\to m and i=1→ji=1\to j where mm is the total number of material phases present. Thus, stresses from a possible (m−1)!(m-1)! interface types may be included in the momentum balance.

By using equation (2.2) to represent surface stresses, three assumptions about the system are implied. Firstly, as the surface stress is a sum of contributions from each interface type, we have neglected any ‘line tension’ stresses that may occur at the intersection between interfaces. While no concensus regarding the existence these stresses has been reached in the literature, most studies suggest that even if line tension does exist, it has a negligible effect on macroscopically measureable contact angles [23, 36, 24] (Boruvka & Neumann 1977). Secondly, by assuming constant surface energies for each interface type, we have neglected any Marangoni forces that would exist if surfactants or thermal gradients were present within the control volume. Thirdly, by representing the surface stress by equation (2.2) we have implicitly assumed that the process of surface creation or destruction is reversible on a molecular scale. We discuss implications of this assumption in § 4.3.

With the immiscible multiphase momentum equation defined, we proceed by taking the dot product of equation (2.1) with the local velocity v\mathbf{v} and then integrating the result over the volume VcvV_{\mathrm{cv}}. Noting that both the stress tensors TM\mathbf{T}_{\mathrm{M}} and TS\mathbf{T}_{\mathrm{S}} are symmetric, application of the Leibnitz formula for differentiating a volume integral, Gauss-Ostrogradskii theorem and compressible continuity equation yields,

ddt∫Vcv(12ρv2+ρΦ^)dV=∫Scvncv⋅[(12ρv2+ρΦ^)(vcv−v)]dS+∫Scvncv⋅[TM⋅v]dS−∫VcvTM:∇v dV+∫Scvncv⋅[TS⋅v]dS−∫VcvTS:∇v dV.(5)\begin{aligned} \frac{d}{dt}\int_{V_{\mathrm{cv}}}\left(\frac{1}{2}\rho v^2+\rho\hat{\Phi}\right)dV ={}&\int_{S_{\mathrm{cv}}}\mathbf{n}_{\mathrm{cv}}\cdot\left[\left(\frac{1}{2}\rho v^2+\rho\hat{\Phi}\right)(\mathbf{v}_{\mathrm{cv}}-\mathbf{v})\right]dS \\ &+\int_{S_{\mathrm{cv}}}\mathbf{n}_{\mathrm{cv}}\cdot[\mathbf{T}_{\mathrm{M}}\cdot\mathbf{v}]dS-\int_{V_{\mathrm{cv}}}\mathbf{T}_{\mathrm{M}}:\nabla\mathbf{v}\,dV \\ &+\int_{S_{\mathrm{cv}}}\mathbf{n}_{\mathrm{cv}}\cdot[\mathbf{T}_{\mathrm{S}}\cdot\mathbf{v}]dS-\int_{V_{\mathrm{cv}}}\mathbf{T}_{\mathrm{S}}:\nabla\mathbf{v}\,dV. \tag*{(5)} \end{aligned}

Here vcv\mathbf{v}_{\mathrm{cv}} and ncv\mathbf{n}_{\mathrm{cv}} are the velocity and outwardly directed unit normal of the control volume boundary ScvS_{\mathrm{cv}}, respectively, vv is the magnitude of the local velocity v\mathbf{v}, and Φ^\hat{\Phi} is a conservative gravitational potential function satisfying g=−∇Φ^\mathbf{g}=-\nabla\hat{\Phi}.

To simplify equation (2.5) further we concentrate on the last two terms on the right hand side which relate to interfacial stresses. For the first of these we substitute in the surface stress definition of equation (2.2) to find

∫Scvncv⋅[TS⋅v]dS=∑i<jσij∫ScvδS,ij(1−nS,ijnS,ij):vncvdS(6)\int_{S_{\mathrm{cv}}}\mathbf{n}_{\mathrm{cv}}\cdot[\mathbf{T}_{\mathrm{S}}\cdot\mathbf{v}]dS =\sum_{i<j}\sigma_{ij}\int_{S_{\mathrm{cv}}}\delta_{S,ij}\left(1-\mathbf{n}_{S,ij}\mathbf{n}_{S,ij}\right):\mathbf{v}\mathbf{n}_{\mathrm{cv}}dS \tag*{(6)}

For the second term we use the surface delta function transport equation derived in the Appendix (section A),

∂δS,ij∂t+∇⋅(δS,ijv)=δS,ij(I−nS,ijnS,ij):∇v.(7)\frac{\partial\delta S_{,ij}}{\partial t}+\nabla\cdot(\delta S_{,ij}\mathbf{v})=\delta S_{,ij}(\mathbf{I}-\mathbf{n}_{S,ij}\mathbf{n}_{S,ij}):\nabla\mathbf{v}. \tag*{(7)}

Substituting TS\mathbf{T}_{S} from equation (2.2) into the second interfacial stress term of equation (2.5), and then using the right hand side of the equation (2.7) to expand the double dot product gives

References

  1. [1]DE GENNES, P. G. 1985 Wetting: statics and dynamics. Reviews of Modern Physics 57 (3), 827–863.
  2. [2]DELMAS, MATHIEU, MONTHIOUX, MARC & ONDARÇUHU, THIERRY 2011 Contact Angle Hysteresis at the Nanometer Scale. Physical Review Letters 106 (13), 136102.
  3. [3]DORRER, CHRISTIAN & RÜHE, JÜRGEN 2008 Drops on Microstructured Surfaces Coated with Hydrophilic Polymers: Wenzel’s Model and Beyond. Langmuir 24 (5), 1959–1964.DOI
  4. [5]EXTRAND, C. W. 2002 Model for contact angles and hysteresis on rough and ultraphobic surfaces. Langmuir 18, 7991–7999.DOI
  5. [6]FENG, LIN, LI, SHUHOUNG, LI, YINGSHUN, LI, HUANJUN, ZHANG, LINGJUAN, ZHAI, JIN, SONG, YANLIN, LIU, BIQIAN, JIANG, LEI & ZHU, DAOBEN 2002 Super-hydrophobic surfaces: From natural to artificial. Advanced Materials 14, 1857–1860.
  6. [7]FENG, LIN, MAI, ZHONGYI ZHANG ZHENHONG, MA, YONGMEI, LIU, BIQIAN, JIANG, LEI & ZHU, DAOBEN 2004 A super-hydrophobic and super-oleophilic coating mesh film film for the separation of oil and water. Angew. Chem. Int. Ed. 43, 2012–2014.
  7. [8]FETZER, RENATE & RALSTON, JOHN 2011 Exploring defect height and angle on asymmetric contact line pinning. The Journal of Physical Chemistry C 115 (30), 14907–14913.DOI
  8. [9]FORSBERG, PONTUS S. H., PRIEST, CRAIG, BRINKMANN, MARTIN, SEDEV, ROSSEN & RALSTON, JOHN 2010 Contact line pinning on microstructured surfaces for liquids in the wenzel state. Langmuir 26 (2), 860–865.DOI
  9. [12]HARVIE, DALTON J. E., ZHANG, XUEHUA, STADLER, BRIGITTE MARIA & DUCKER, WILLIAM 2008 Contact angle hysteresis on sparsely structured surfaces. In 82nd ACS Colloid and Surface Science Symposium. Raleigh, NC, USA, presentation.
  10. [13]HUH, CHUN & SCRIVEN, L.E 1971 Hydrodynamic model of steady movement of a solid/liquid/fluid contact line. Journal of Colloid and Interface Science 35 (1), 85–101.DOI
  11. [14]JAMES, ASHLEY J. & LOWENGRUB, JOHN 2004 A surfactant-conserving volume-of-fluid method for interfacial flows with insoluble surfactant. Journal of Computational Physics 201, 685–722.DOI
  12. [15]JIANG, YOUHUA, XU, WEI, SARSHAR, MOHAMMAD AMIN & CHOI, CHANG-HWAN 2019 Generalized models for advancing and receding contact angles of fakir droplets on pillared and pored surfaces. Journal of Colloid and Interface Science 552, 359–371.DOI
  13. [16]JOANNY, J. F. & DE GENNES, P. G. 1984 A model for contact angle hysteresis. J. Phys. Chem. 81 (1), 552–562.
  14. [17]JOHNSON JR, RULON E. & DETTRE, ROBERT H. 1964 I: Study of an idealized rough surface. Contact Angle, Wettability, and Adhesion: Advances in Chemistry Series 43, 112–135.
  15. [18]KREYSZIG, ERWIN 2006 Advanced engineering mathematics, 9th edn. John Wiley and Sons.
  16. [20]LAFAURIE, BRUNO, NARDONE, CARLO, SCARDOVELLI, RUBEN, ZALESKI, STÉPHANE & ZANETTI, GIANLUIGI 1994 Modelling merging and fragmentation in multiphase flows with SURFER. Journal of Computational Physics 113, 134–147.DOI
  17. [21]LI, DANDAN, XUE, YAHUI, LV, PENGYU, HUANG, SHENGLIN, LIN, HAO & DUAN, HUILING 2016 Receding dynamics of contact lines and size-dependent adhesion on microstructured hydrophobic surfaces. Soft Matter 12 (18), 4257–4265.DOI
  18. [22]LI, KAN, JU, JIE, XUE, ZHONGXIN, MA, JIE, FENG, LIN, GAO, SONG & JIANG, LEI 2013 Structured cone arrays for continuous and effective collection of micron-sized oil droplets from water. Nature Communications 4.DOI
  19. [23]MARMUR, ABRAHAM 1997 Line tension and the intrinsic contact angle in solid-liquid-fluid systems. J. Colloid Interface Sci. 186, 462–466.pubmed.ncbi.nlm.nih.gov/9056376
  20. [24]MARMUR, ABRAHAM 2006 Soft contact: measurement and interpretation of contact angles. Soft Matter 2, 12–17.DOI
  21. [25]MARMUR, ABRAHAM 2022 The Contact Angle Hysteresis Puzzle. Colloids and Interfaces 6 (3), 39.DOI
  22. [26]McHALE, G. 2007 Cassie and wenzel: Were they really so wrong? Langmuir 23 (15), 8200–8205, publisher: American Chemical Society.pubmed.ncbi.nlm.nih.gov/17580921
  23. [27]Moffatt, H. K. 1964 Viscous and resistive eddies near a sharp corner. Journal of Fluid Mechanics 18 (1), 1–18.
  24. [28]Mohammad Karim, Alireza 2022 A review of physics of moving contact line dynamics models and its applications in interfacial science. Journal of Applied Physics 132 (8), 080701.DOI
  25. [29]Nosonovsky, Michael 2007 On the Range of Applicability of the Wenzel and Cassie Equations. Langmuir 23 (19), 9919–9920.pubmed.ncbi.nlm.nih.gov/17665939
  26. [30]Öner, Didem & McCarthy, Thomas J. 2000 Ultrahydrophobic surfaces, effects of topography length scales on wettability. Langmuir 16, 7777–7782.DOI
  27. [31]Öpik, U. 2000 Contact-angle hysteresis caused by a random distribution of weak heterogeneities on a solid surface. Journal of Colloid and Interface Science 223 (2), 143 – 166.pubmed.ncbi.nlm.nih.gov/10700398
  28. [32]Panchagnula, Mahesh V. & Vedantam, Srikanth 2007 Comment on How Wenzel and Cassie Were Wrong by Gao and McCarthy. Langmuir 23 (26), 13242–13242.pubmed.ncbi.nlm.nih.gov/18001069
  29. [34]Petrov, P. & Petrov, I. 1992 A combined molecular-hydrodynamic approach to wetting kinetics. Langmuir 8 (7), 1762–1767.DOI
  30. [35]Pomeau, Y & Vannimenus, J 1985 Contact angle on heterogeneous surfaces: Weak heterogeneities. Journal of Colloid and Interface Science 104 (2), 477–488.
  31. [36]Pompe, T., Fery, A. & Herminghaus, S. 1999 Measurement of contact line tension by analysis of the three-phase boundary with nanometer resolution. J. Adhesion Sci. Technol. 13 (10), 1155–1164.
  32. [37]Priest, Craig, Albrecht, Trent W. J., Sedev, Rossen & Ralston, John 2009 Asymmetric wetting hysteresis on hydrophobic microstructured surfaces. Langmuir 25 (10), 5655–5660.DOI
  33. [38]Priest, Craig, Sedev, Rossen & Ralston, John 2007 Asymmetric wetting hysteresis on chemical defects. Physical Review Letters 99 (2), 026103.pubmed.ncbi.nlm.nih.gov/17678237
  34. [39]Priest, Craig, Sedev, Rossen & Ralston, John 2013 A quantitative experimental study of wetting hysteresis on discrete and continuous chemical heterogeneities. Colloid and Polymer Science 291 (2), 271–277.DOI
  35. [40]Raj, Rishi, Enright, Ryan, Zhu, Yangying, Adera, Solomon & Wang, Evelyn N. 2012 Unified Model for Contact Angle Hysteresis on Heterogeneous and Superhydrophobic Surfaces. Langmuir 28 (45), 15777–15788.DOI
  36. [41]Robbins, M. O. & Joanny, J. F. 1987 Contact Angle Hysteresis on Random Surfaces. EPL (Europhysics Letters) 3 (6), 729.DOI
  37. [42]Song, Qingrui, Liu, Kun, Sun, Wei, Jiao, Yunlong, Wang, Zhaochang, Liu, Xiaojun & Ye, Jiaxin 2022 Contact angle hysteresis and lateral adhesion strength on random rough surfaces. Physics of Fluids 34 (8), 082015.DOI
  38. [43]Sun, T. L., Feng, L., Gao, X. F. & Jiang, L. 2005 Bioinspired surfaces with special wettability. Accounts of Chemical Research 38, 644–652.
  39. [44]Voinov, O. V. 1976 Hydrodynamics of wetting. Translated from Izvestiya Akademii Nauk SSSR (5), 76–84.DOI
  40. [45]Wenzel, Robert N. 1936 Resistance of solid surfaces to wetting by water. Industrial and Engineering Chemistry 28 (8), 988–994.DOI

Paper details

vlnc:W_nfzv8xsn
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents