betaFeedback

WorksPhysics and Astronomy

Unveiling the impact of organic cation passivation on structural and optoelectronic properties of two-dimensional perovskites thin films

Abstract

Several organic cations have been used to passivate perovskite films; however, selecting the optimal cation remains challenging. In this work, we carried out density functional theory calculations to understand the effects induced by 17 different organic cations on the passivation (P-cations) of thin two-dimensional P2MAn-1PbnI3n+1 perovskites films, where n = 1 and 2. We found that the interactions between different types of P-cations and the inorganic slab affect the length and angles of the bonds within the inorganic framework (PbI6-octahedra). In general, the binding mechanism includes the interactions of organic cations with the inorganic framework, which leads to the accumulation of electron density within the halides, indicative of Bronsted–Lowry acid-base interactions. Oxygenated groups facilitate additional H-bond formation through -OH and -COOH groups, promoting the localization of the electron density between layers and improving the energetic stability of the system. Based on the results and analysis, we found that three P-cations might have higher potential for real-life applications, namely 4-fluorophenylethylammonium (FPEA), phenylethylammonium (PEA) and butylammonium (BtA).

Introduction

Hybrid organic-inorganic metal halide perovskites have emerged as a prominent class of materials for perovskite solar cell (PSC) applications.[1, 2] For example, the power conversion efficiency (PCE) has risen from 3.8 %[1] in 2009 to about 26 %[3] in 2024, that is, increasing steadily along 15 years. Their remarkable potential is attributed to their excellent optoelectronic characteristics, including a high absorption coefficient,[4, 5] low exciton binding energy,[6, 7] and outstanding charge transport mobility.[8]

The photoactive layer in PSCs is formed by three-dimensional (3D) perovskites with the general chemical formula ABX3ABX_{3}, in which AA represents an organic or inorganic monovalent cation such as methylammonium (MA), formamidinium (FA), Cs+\mathrm{Cs}^{+}, and so on, while BB is a divalent cation (e.g., Pb2+\mathrm{Pb}^{2+}, Sn2+\mathrm{Sn}^{2+}), and XX is a halide anion (I−\mathrm{I}^{-}, Cl−\mathrm{Cl}^{-}, Br−\mathrm{Br}^{-}).[9, 10] As a result, the possible chemical combinations of AA, BB, and XX can lead to the formation of large variety of compounds, allowing for precise adjustment of their structural and optoelectronic properties through different chemical configurations.[11]

The widespread application of PSCs faces challenges due to structural stability issues. For example, moisture,[12] ultraviolet irradiation,[13] oxygen,[14] and heat,[15] are the main environmental factors that affect the stability of real-life applications. To address this issue, numerous strategies have been suggested and thoroughly investigated using experimental or theoretical techniques,[8, 11, 16, 17, 18] including the use of particular organic molecules as passivation agents in perovskite thin films.[8, 19] The passivation process aims to protect perovskite thin films from environmental conditions and stabilize unstable perovskite phases.[20, 21]

For example, bulky organic cations with large carbon chains have received increasing attention as surface passivation agents (P-cations) with the aim of improving the long-term stability and performance of PSCs.[22, 23, 24] Furthermore, during the passivation process of thin films of MAPbI3_3, large organic molecules can undergo a cation exchange with PbI2_2 on the surface of the 3D film, forming a thin atomic two-dimensional (2D) perovskite capping layer.

The number of inorganic layers (nn) in perovskite thin films, is highly sensitive to the type of organic molecules used as passivators and the precursors involved in the perovskite thin film synthesis.[22] For example, monovalent organic cation (P-cation) passivation in MAPbI3_3 thin films can induce the formation of structures described by the following general chemical formula, P2_2(MAn−1_{n-1})Pbn_nI3n+1_{3n+1}, which is one of the building blocks in the 2D Ruddlesden–Popper perovskite structures.[25]

The vast availability of P-cations enables the rapid advancement of organic-inorganic optoelectronic devices, where the material properties are highly tunable by the nature of the organic molecule. The dipole of P-cations can play a crucial role in modulating the work function and is also related to the mobility of the holes and the performance of the device.[26] However, bulky organic cations increase the dielectric confinement and exciton binding energy of the material, thus charge separation and transport are dependent on organic ammonium cations and their supramolecular chemistry.[26, 27]

Li et al.,[28] successfully addressed the problem of poor carrier transport properties in perovskites films by incorporating γ\gamma-aminobutyric acid (GABA, C4_4H10_{10}O2_2N) as a possible passivation agent. The addition of GABA reduces the exciton binding energy to 73 meV in (GABA)2_2MA3_3Pb4_4I13_{13}, in comparison to the compound (BtA)2_2MA3_3Pb4_4I13_{13} (approximately 119 meV), where BtA represents the butylammonium molecule (C4_4H12_{12}N), and results in devices with a PCE of approximately 18.73%. Incorporation of unsaturated organic passivator improves the carrier pathway and solar cell efficiency, for example, phenethylammonium (PEA, C8_8H12_{12}N) (15.46%) compared to butylammonium (11.71%).[27] Furthermore, 2D films of perovskites also found applications in X-ray detectors,[29] where the dark current is minimized by depositing a thin layer of (PEA)2_2PbI4_4 onto a pristine MoS2_2 photodetector.[30]

Aliphatic P-cations such as BtA have shown remarkable properties, such as low steric hindrance, which facilitate the formation of perovskite films. However, these P-cations exhibit insulating properties that accentuate the effects of quantum and dielectric confinement.[31, 32] In contrast, aromatic P-cations can offer additional advantages to enhance charge transport in PSCs. These advantages encompass higher dielectric constants, which reduce the dielectric mismatch between organic and inorganic layers.[33] Aromatic P-cations, through π⋯π\pi\cdots\pi interactions and hydrogen bonding (H-bonds), can also contribute to structural stability and improved molecular packing rearrangement. This contrasts to aliphatic cations with softer organic tails that provide greater flexibility and weaker interactions during film formation.[34, 35]

In this work, we present an extensive theoretical investigation, based on density functional theory calculations, to explore the effects induced by the passivation of 2D perovskite thin films by different P-cations.

The selected perovskites can be represented by the P2(MAn−1)PbnI3n+1P_{2}(\mathrm{MA}_{n-1})P\mathrm{b}_{n}I_{3n+1} chemical formula, where n=1n = 1 represents slabs composed by a single PbI6\mathrm{PbI}_{6}-octahedra monolayer and n=2n = 2 indicates slabs composed by two PbI6\mathrm{PbI}_{6}-octahedra layers. For n=2n = 2, we have selected MAMA (methylammonium), while considering a set of 17 PP-cations (aryl, aromatic and with oxygenated groups (–OH and –COOH)) to act as passivation agents.

Our findings reveal that PP-cations significantly affect the structural and optoelectronic properties of the materials. The binding mechanism involves charge transfer between the organic and inorganic thin film, which is expected and indicating a Brønsted–Lowry acid-base behavior. Furthermore, oxygenated groups can form additional H-bonds, which enhance energy stability and impact the electronic band gap. The optimal choice of PP-cation depends on the intended application; longer alkylammonium chains contribute to improved stability, while functionalization of alcohol/carboxylic acid enhances energetic stability and charge transfer. Furthermore, aromatic PP-cations offer stability through conjugation, which regulates the crystal arrangement. Fluorinated PP-cations have an impact on energy stability, with the F positions influencing structural stability and the properties of the charge carrier. Therefore, we selected three PP-cations with high potential for PSC applications: 4-fluorophenylethylammonium (FPEA), phenylethylammonium (PEA) and butylammonium (BtA).

Theoretical Approach and Computational Details

Total Energy Calculations

Our calculations are based on the DFT[36, 37] framework within the semilocal Perdew–Burke–Ernzerhof[38] (PBE) formulation for the exchange-correlation (XC) energy functional, as implemented in the Vienna ab initio simulation package (VASP),[39, 40] version 5.4.4, where the KS orbitals are expanded in plane waves. We used the all-electron projector augmented wave (PAW) method[41, 42] to describe the interaction between the core and the valence electrons. Semilocal XC functionals have been known to have limitations in providing an accurate description of long-range nonlocal van der Waals (vdW) interactions, e.g. adsorption of molecular species on surfaces.[33] [43] Thus, we used the semi-empirical D3 vdW correction[44] to improve the description of selected monovalent cations on the MAPbI3_3 thin films.[22, 28, 45]

The selected monovalent PP-cations have different geometries and molecular sizes, which can affect the magnitude of the inplane (xyxy) equilibrium lattice parameters (a0,b0a_{0}, b_{0}). Therefore, to account for these effects, all equilibrium structures were obtained by optimizing the inplane stress tensor and atomic forces in all directions (xyzxyz),[46] using a plane wave cutoff energy of 1.50×ENMAXmax⁡1.50 \times\mathrm{ENMAX}_{\max}, where ENMAXmax⁡\mathrm{ENMAX}_{\max} is the maximum recommended cutoff energy within PAW projectors for each particular compound. For example, 651.647 eV (compounds with O), 731.547 eV (compounds with F), and 631.353 eV for the remaining compounds. Throughout the stress-tensor calculations, the magnitude of the stress tensor along the zz-direction was not optimized (repeated slab geometry), however, all atomic forces were optimized without constraints.

For the remaining properties, such as binding energies, density of states (DOS), band structures, work function, and net atomic charges computed using the density-derived electrostatic and chemical (DDEC) method,[47, 48] we employed a plane wave cutoff energy of 548.660 eV for all systems. For the integration of the Brillouin zone (BZ), we employed k-mesh of 2×2×12 \times2 \times1 for the optimization of the structure and 4×4×14 \times4 \times1 for the remaining properties. All equilibrium structures were obtained once the atomic forces in each atom were smaller than 2.50×10−2 eV A˚−12.50 \times10^{-2}\ \mathrm{eV}\ \text{\AA}^{-1} and with a total energy convergence of 10−510^{-5} eV.

Selection of Organic Monovalent Cations as Passivation Agents

There are a huge number of possible organic monovalent cations that can act as passivation agents for perovskite thin films.[49, 50] Few descriptors have been suggested to optimize the selection process of monovalent PP-cations as passivation agents, which include: (ii) the atomic radius of the PP-cations should be larger than the typical AA-cations commonly used in ABX3ABX_3 compounds, i.e., large than 2.6 Å (Goldschmidt tolerance factor);[24] (iiii) should induce small structural deformations in the inorganic framework;[51] (iiiiii) should have the ability to act as charge donor to the thin film, e.g., a net positive charge in the amine group, in which preferring cations with primary ammonium over secondary, etc., in descending order.[52]

Based on the mentioned rules, we selected a set of 17 PP-cations, which are shown in Figure 1, namely, methylammonium (MA, CH6N\mathrm{CH_6N}), ethylammonium (EtA, C2H8N\mathrm{C_2H_8N}), phenylethylammonium (PEA, C8H12N\mathrm{C_8H_{12}N}), propan-1-aminium (PrA, C3H10N\mathrm{C_3H_{10}N}), butylammonium (BtA, C4H12N\mathrm{C_4H_{12}N}), isobutylammonium (IBtA, C4H12N\mathrm{C_4H_{12}N}), anilinium (An, C6H8N\mathrm{C_6H_8N}), phenylmethylammonium (PMA, C7H10N\mathrm{C_7H_{10}N}), 1-adamantylmethylazanium (AMeA, C11H20N\mathrm{C_{11}H_{20}N}), cyclopropylazanium (C3cyc, C3H8N\mathrm{C_3H_8N}), 4-fluorophenylethylammonium (FPEA, C8H11FN\mathrm{C_8H_{11}FN}), perfluorobenzylammonium (5FBz, C7H5F5N\mathrm{C_7H_5F_5N}), ethanolamine (EtOH, C2H8ON\mathrm{C_2H_8ON}), 3-aminopropan-1-ol (PrOH, C3H10ON\mathrm{C_3H_{10}ON}), 5-valeric ammonium acid (5AVA, C5H12O2N\mathrm{C_5H_{12}O_2N}), 2-thiophenemethylammonium (ThMA, C5H8SN\mathrm{C_5H_8SN}), and γ\gamma-amino butyric acid (GABA, C4H10O2N\mathrm{C_4H_{10}O_2N}).

Molecular representations of selected monovalent P-cations

Figure 1. Molecular representation of the selected monovalent PP-cations in the optimized neutral configurations. The chemical formulas are enclosed within parentheses for clarity. The abbreviations are defined within the text.

Two-Dimensional Perovskite Thin Films

Primarily, the 2D thin films of perovskites structures were conceptually obtained by cutting along the crystallographic (100) of the 3D MAPbI3\mathrm{MAPbI_3} orthorhombic (2×2×22 \times2 \times2) supercell and adding a vacuum thickness of 15 Å, i.e., the well known repeated

slab geometry approximation.[53] The slabs are characterized by the general chemical formula P2(MAn−1)nPbnI3n+1\mathrm{P_2(MA_{n-1})_nPb_nI_{3n+1}}, where n=1n = 1 and n=2n = 2 corresponds to a inorganic monolayer and an inorganic bilayer. As mentioned a few times, the PP-cations act as passivators for the inorganic layers (PbI6\mathrm{PbI_6}-octahedra).

Therefore, according to the electron counting rule, each side of the slab (top and bottom) requires 4 PP-cations for a complete surface passivation, resulting in the P8Pb4I16\mathrm{P_8Pb_4I_{16}} (n=1n = 1, 1L) and P8(MA)4Pb8I28\mathrm{P_8(MA)_4Pb_8I_{28}} (n=2n = 2, 2L) models. It is important to note that these chemical formulas represent the number of chemical species in our models, rather than the unit formulas of the compounds. Additional details are illustrated in Figure 2.

Passivation model via organic $P$-cations, using PEA-cations as example (A), on MAPbI$_3$ (B) with formation of monolayer and bilayer 2D perovskites thin films (C)

Figure 2. Passivation model via organic PP-cations, using PEA-cations as example (A), on MAPbI3_3 (B) with formation of monolayer and bilayer 2D perovskites thin films (C).

Passivation on Perovskites Layers

Regarding the conformation of organic PP-cations, using the MA molecule as a reference for the construction of other organic bindings, one of the hydrogen attached to carbon was enumerated by organic groups such as alkyl (EtA, PrA, BtA), alicyclic (C3cyc), tricyclic (AMeA) and aromatic (PMA, PEA, ThMA, 5FBz). The presence of a rotatable methylene ammonium R–NH3_3 head group in bulk organic cations has been observed to result in the formation of both the ferroelectric phase (Cmc21_1) and the paraelectric phase (Cmca), which in turn gives rise to ordered and disordered 2D orientations in hybrid organic-inorganic perovskite (HOIP) systems.[52]

Here, we considered the R–NH3_3 oriented in the vertical (vv), horizontal (hh), and slanted (ss) relative to the plane PbI2_2 to examine the dipole effects of the interface of head group orientations, as illustrated in Figure 3. Compared to DFT-PBE+D3 calculations performed within our group, geometric optimization using stress tensor and atomic forces for these systems was a challenge. In the following, we summarize the steps performed:

Top and side views of the vertical ($v$), horizontal ($h$), and slant ($s$) orientations of the R–NH$_3$ group in relation to the PbI$_2$ plane

Figure 3. Top and side views of the vertical (vv), horizontal (hh), and slant (ss) orientations of the R–NH3_3 group in relation to the PbI2_2 plane, for the case of EtA2_2PbI4_4 (monolayer) and EtA2_2MAPb2_2I7_7 (bilayer) perovskites. The dashed line represents the unit cell.

  1. We started the optimization considering the inplane lattice parameters (a0a_0, b0b_0) frozen, while c0c_0 was kept fixed along all calculations. Through the selective dynamics feature implemented in VASP, we kept the inorganic slab frozen, allowing only the PP-cations to move. This step was carried out using only the Γ\Gamma-point for BZ integration and a plane wave cutoff energy of 0.875×ENMAXmax⁡0.875 \times\mathrm{ENMAX}_{\max}. We performed an average of 300 ionic

steps for each PP-cation to adjust to the substrate.

  1. In the second step, we optimize the atomic forces on all atoms within the unit cell using the same computational parameters as in the first step.

  1. In the 3rd step, we optimized the inplane (xyxy) stress tensor and the atomic forces on all atoms. For that, we performed only the 25 steps, that is, the first changes in the parameters a0a_0 and b0b_0. In this step, we increase the cutoff energy to 1.250×ENMAXmax1.250 \times\mathrm{ENMAX}_{max} and use the Γ\Gamma-point for the BZ integration.

  1. In the 4th step, we optimized only the atomic forces (200 ionic steps) on all atoms using a cutoff energy of 1.125×ENMAXmax1.125 \times\mathrm{ENMAX}_{max} and only the Γ\Gamma-point for the integration of the BZ.

  1. In the 5th step, we optimize the inplane stress tensor and atomic forces on all atoms considering a plane-wave cutoff energy of 1.500×ENMAXmax1.500 \times\mathrm{ENMAX}_{max} and a kk-mesh of 2×2×12 \times2 \times1 for the BZ integration. At the end, we obtain the equilibrium parameters a0a_0 and b0b_0 for all configurations.

  1. Finally, using the equilibrium lattice parameters (a0a_0, b0b_0), we optimize the atomic forces on all atoms without constraints using a plane wave cutoff energy of 1.125×ENMAXmax1.125 \times\mathrm{ENMAX}_{max} and a kk-mesh of 2×2×12 \times2 \times1 for the BZ integration.

Results and Discussion

Several structural optimizations were performed, producing the lowest energy configurations for each respective system, as depicted in Figure 4 and Figure 5. To improve our atomistic understanding of the passivation effects induced by organic monocations (R\mathrm{R}–NH3+\mathrm{NH}_3^+), we performed structural, energetic, electronic, and optical characterizations using several descriptors (physicochemical properties). In the subsequent discussion, we will highlight the most significant findings, while additional data and analyses are provided within the Electronic Supporting Information (SI) file.

Top and side views of the monolayers 2D perovskites thin films

Figure 4. Top and side views of the monolayers 2D perovskites thin films, which have the P2PbI4\mathrm{P}_{2}\mathrm{PbI}_{4} compositions (P=PP = P-cations). The dashed line represents the unit cell.

Top and side views of the bilayers 2D perovskites thin films

Figure 5. Top and side views of the bilayers 2D perovskites thin films, which have the P2MAPb2I7P_{2}MAPb_{2}I_{7} compositions (PP = PP-cations). The dashed line represents the unit cell.

Preferential P-Cation Orientation on Perovskite Slabs

The R\mathrm{R}–NH3\mathrm{NH}_3 moiety plays a crucial role in 2D perovskites from the optoelectronic point of view.[51] To investigate its role, we performed several structural optimizations for different conformations, depending on vertical (vv), horizontal (hh), and slant (ss) orientations of the R\mathrm{R}–NH3\mathrm{NH}_3 group relative to the plane PbI2\mathrm{PbI}_2 formed after passivation of each PP-cation, as illustrated in Figure 3. According to our results, after passivation, there was a consistent reduction in C–N (davC−NH3d_{av}^{\mathrm{C-NH_3}}) distances, evident in monolayer and bilayer films. The values converged to an average of 1.49 Å, emphasizing the influence of interactions between the PP-cation and the inorganic slab.

Furthermore, the transition from the gas phase of the PP-cations molecules to the passivated phase induced a significant variation in the molecular conformation, especially in the presence of larger organic chains and functional groups, leading to novel intermolecular interactions. It is crucial to note that the structures generated with C3vc and An as PP-cations exhibited steric hindrance for the hh orientations; therefore, such configurations were not considered.

For the relative energy differences (ΔEtot\Delta E_{tot}), we choose the vv orientations of each system as the reference energy system, which is critical to obtain reliable comparison among the different molecular configurations. According to the ΔEtot\Delta E_{tot} results shown in Figure 6, 41% of the monolayers conformations have lower energy for the ss configuration, whereas for the inorganic bilayer slabs, 47% of the conformations have lower energy for the vv configuration. Some structural parameters, such as hydrogen bonds (H-bonds), could clarify the energy stability of compounds.

Figure 6. Relative total energy (ΔEtot\Delta E_{\mathrm{tot}}) for all configurations (vv, hh, and ss) for both monolayer and bilayer perovskite structures. Here, the vv orientations are at ΔEtot=0\Delta E_{\mathrm{tot}} = 0.

Formation of H-bonds on the P-Cation/Slab Interface

Previous studies have claimed a direct correlation between energetic stability and the formation of a H-bond in perovskite-based materials,[54, 55] [56] and therefore it is important to characterize the formation of H-bonds for the studied systems. In all 2D systems examined, we found shorter and directional hydrogen-iodide bond distances (davH⋯Id_{\mathrm{av}}^{\mathrm{H}\cdots\mathrm{I}}) for the NH⋯\cdotsI bond. We established a cutoff radius of 3.0 Å for davH⋯Id_{\mathrm{av}}^{\mathrm{H}\cdots\mathrm{I}}, which is logically within the hydrogen bonding range (≈3.0\approx3.0 Å).57 When analyzing the configurations vv, hh, and ss, in general, it is observed that the behavior of davH⋯Id_{\mathrm{av}}^{\mathrm{H}\cdots\mathrm{I}} decreases for structures with a lower total energy. Consequently, it can be inferred that the H-bond length is directly correlated with the energetic stability of the system. Therefore, for further discussion, we will consider the characterizations of the lowest energy structures between the hh, vv, and ss configurations for each PP-cations. Thus, we have 17 monolayer and 17 bilayer structures, represented respectively by Figure 4 and Figure 5.

The davH⋯Id_{\mathrm{av}}^{\mathrm{H}\cdots\mathrm{I}} values differ between 1L and 2L for structures with the same R–NH3_3 group orientation, suggesting that the quantum confinement effect can affect the molecular conformation of the PP-cation. The AMeA PP-cation is characterized by a substantial number of hydrogen atoms. Therefore, this system demonstrates a notable relative disparity in davH⋯Id^{\mathrm{H}\cdots\mathrm{I}}_{\mathrm{av}} between the 1L and 2L configurations, which is approximately 12.05%. We observed lower values for PP-cations with fewer hydrogens, e.g. EtA at 0.38%. For structures that contain PP-cations with oxygenated groups, –COOH and –OH in their tails, we found H-bonds through hydrogen-oxygen interactions such as OH⋯O\mathrm{OH}\cdots\mathrm{O}, CH⋯O\mathrm{CH}\cdots\mathrm{O}, and NH⋯O\mathrm{NH}\cdots\mathrm{O} with the neighboring PP-cation, Figure 7. These extra polar interactions play a crucial role in decreasing exciton binding energy and improving the PCE of PSCs.[54]

Molecular representation of intermolecular hydrogen-bond interactions in bilayer GABA systems

Figure 7. Molecular representation of the formation of intermolecular interactions of the H-bonds type, as well as the length of the H-bonds via OH···O and NH···O in bilayer GABA systems.

The OH⋯O\mathrm{OH}\cdots\mathrm{O} interactions present in structures passivated with molecules such as GABA, 5AVA, EtOH, and PrOH play a crucial role in optoelectronic properties, due to the ability to promote charge transfer between adjacent ligands in the structure. In addition, the type of H-bonds, dOH⋯Od^{\mathrm{OH\cdots O}}, effectively localizes charges in the interlayer region close to the PbI6_6-octahedra, playing a crucial role in the binding mechanism process of the 2D perovskites.[28, 54]

Inplane Slab Lattice Deformations

To characterize the role of PP-cations in the slab lattice, we selected two structural descriptors, namely: (i) equilibrium lattice parameters (a0a_0, b0b_0) and (ii) surface area (AcellA_{\mathrm{cell}}). All results are shown in Figure 8. Monolayer systems have lower equilibrium lattice constants (a0a_0, b0b_0) than the corresponding bilayer systems as a result of the quantum confinement effect. Furthermore, PbI6_6-octahedra distortions, which result from out-of-phase distortions and short and long Pb–I bonds, have a considerable impact on a0a_0 and b0b_0; these results are consistent with previous studies.[18, 51]

Figure 8. Equilibrium structural parameters for 2D P2PbI4P_2\mathrm{PbI}_4 and P2(MA)Pb2I7P_2(\mathrm{MA})\mathrm{Pb}_2\mathrm{I}_7 systems: lattice parameters (a0a_0, b0b_0), surface unit cell area (AcellA_{\mathrm{cell}}), the average hydrogen bond distance with the iodine (davH⋯Id_{\mathrm{av}}^{\mathrm{H}\cdots\mathrm{I}}), average bond distance of the short (SS-davPb−Id_{\mathrm{av}}^{\mathrm{Pb-I}}) and long (LL-davPb−Id_{\mathrm{av}}^{\mathrm{Pb-I}}) bonds, average angles for the I–Pb–I (θavIPbI\theta_{\mathrm{av}}^{\mathrm{IPbI}}) and Pb–I–Pb (θavPbIPb\theta_{\mathrm{av}}^{\mathrm{PbIPb}}) combinations, the effective coordination number for the Pb (ECNavPb\mathrm{ECN}_{\mathrm{av}}^{\mathrm{Pb}}) and the average volume of the PbI6\mathrm{PbI}_6-octahedra (VavoctV_{\mathrm{av}}^{\mathrm{oct}}).

However, the lattice constants can also be influenced by the PP-cation size and intermolecular forces, e.g. H-bonds shown in Figure 8. In addition to the inherent characteristics of the crystal lattice, the size of the PP-cation can affect the arrangement of the atoms within the lattice. When the PP-cation is larger in size, it can introduce strain and distort the regularity of the lattice. In contrast, a smaller PP-cation can lead to a more compact and tightly packed lattice structure.

In terms of the lattice properties of monolayer systems, we found a pattern for straight-chain PP-cations. First, the values of a0a_0 decrease as the linear chain increases, i.e., MA < EtA < PrA < BtA. These differences in the equilibrium lattice parameters of systems induced by the nature of the carbon chain can have an effect on the thermal properties of 2D perovskites.58 In addition, when comparing PP-cations with the same number of carbons, we also found a decrease in a0a_0 for branched-type cations, e.g. BtA → IBtA, as well as for both 1L and 2L when considering the following films: EtA → EtOH; PrA → PrOH; BtA → GABA. This relation may be associated with the formation of H-bonds in systems passivated with –OH and –COOH.

For passivation with aromatic PP-cations, the π⋯π\pi\cdots\pi interactions can affect the lattice, and our data indicate that there is a decrease in lattice parameters as the branch bonded to the aryl group increases, thus following the sequence An →\rightarrow PMA →\rightarrow PEA. As a result, they exhibit a regulated arrangement and orientation of 2D perovskites, which can be seen from the side view Figure 4, and thus according to data reported for these types of PP-cations.59

Finally, we define the area of the unit cell of the surface (AcellA_{\mathrm{cell}}), as the product a0×b0a_0 \times b_0. In this context, AcellA_{\mathrm{cell}} is significantly influenced by the effects induced on the lattice parameters. Consequently, bilayer systems exhibit higher AcellA_{\mathrm{cell}} values compared to their corresponding monolayers. This can be attributed to the reduced quantum

confinement effect and also the role of passivation of the PP-cation and the presence of MA interlayers, which collectively contribute to the observed increase in surface area.

PbI6-Octahedra Distortions

For a deeper structural characterization, the following local geometric descriptors were selected: (i) average bond lengths for the PbI6\mathrm{PbI}_6-octahedra, (ii) bond angles, (iii) average effective coordination numbers for Pb (ECNavPb\mathrm{ECN}_{\mathrm{av}}^{\mathrm{Pb}}), and (iv) average volume of PbI6\mathrm{PbI}_6-octahedra (VavoctV_{\mathrm{av}}^{\mathrm{oct}}). All results are shown in Figure 8, and the data are discussed in more detail below.

Due to the electrostatic interactions between the PP-cation charges and the negative charge on the surface of the thin films, the Pb–I bond distances along the PbI6_6-octahedra are closely related. However, according to a hexacoordinated metal complex, we have axial and equatorial bonds that may differ when interacting with ligands.60 As a result, each octahedron contains short (S-davPb−Id_{\mathrm{av}}^{\mathrm{Pb-I}}) and long (L-davPb−Id_{\mathrm{av}}^{\mathrm{Pb-I}}) chemical bonds, Figure 8, which contribute to lower distortions along the lattice.

Intriguingly, we found stronger effects in 2L systems in terms of S-davPb−Id_{\mathrm{av}}^{\mathrm{Pb-I}} and L-davPb−Id_{\mathrm{av}}^{\mathrm{Pb-I}}, resulting in overall systems with the lowest, S-davPb−Id_{\mathrm{av}}^{\mathrm{Pb-I}}, and highest, L-davPb−Id_{\mathrm{av}}^{\mathrm{Pb-I}}, bond length compared to equivalent 1L systems. This pattern has been observed in 2D BA2_2(MAn−1_{n-1})Pbn_nI3n+1_{3n+1} crystals, where reduced S-davPb−Id_{\mathrm{av}}^{\mathrm{Pb-I}} and increased L-davPb−Id_{\mathrm{av}}^{\mathrm{Pb-I}} values of n=2n = 2 to 4 have been discovered.[31] In particular, the bilayer 5FBz system stands out with the lowest S-davPb−Id_{\mathrm{av}}^{\mathrm{Pb-I}} and the highest L-davPb−Id_{\mathrm{av}}^{\mathrm{Pb-I}} among the investigated systems, which can be attributed to repulsion between iodine and fluorine halides present in the PP-cations.

This effect on Pb–I bonds in 2L systems indicates a relationship to the effects of interlayer cations (MA), which present different R–NH3_3 group orientations with respect to PP-cation in 2D material. As stated previously, this effect decreases when n=1n = 1, but is minimal for the bulk MAPbI3_3 since only MA is present as a cation within the thin film. Therefore, we can assume that for 1<n<∞1 < n < \infty, there is a mixture of distortion effects in 2D perovskites that arises from the competition of distortions from the cc-axis and abab-plane caused by PP-cations and MA interlayer molecules, respectively. It is critical to note that the corner-connected octahedra in 1L structures must always rotate in the opposite direction (out of phase) to maintain structural integrity, as seen in the top view in Figure 4. From the side view, all monolayers show approximately 0° tilting.

To gain a comprehensive understanding of octahedral distortions, we also measured the angles formed by the Pb–I–Pb bonds (θavPbIPb\theta_{\mathrm{av}}^{\mathrm{PbIPb}}) as well as for I–Pb–I (θavIPbI\theta_{\mathrm{av}}^{\mathrm{IPbI}}). Monolayer systems, on average, exhibit substantial differences in the values of θavPbIPb\theta_{\mathrm{av}}^{\mathrm{PbIPb}} compared to the bulk angles, indicating the effect of the number of layers on the distortions. The fact that θavPbIPb\theta_{\mathrm{av}}^{\mathrm{PbIPb}} often has lower values than θavIPbI\theta_{\mathrm{av}}^{\mathrm{IPbI}} suggests that out-of-phase distortions account for most of the observed results.

In general, average ECNavPb_{\mathrm{av}}^{\mathrm{Pb}} values for monolayer systems closely resemble those found for bulk MAPbI3_3 (ECNavPb_{\mathrm{av}}^{\mathrm{Pb}} = 5.99 NNN, where NNN denotes the number of nearest neighbors). Therefore, PbI6_6-octahedra do not present relevant Jahn–Teller type distortions,61 explained by the full electronic shell of lead dd-states. However, small changes in lead coordination can be attributed to passivation effects, producing distortions and small displacements of the metal center due to N–H···I–Pb interactions.

Remarkably, the 5FBz bilayer system displayed the lowest ECNavPb_{\mathrm{av}}^{\mathrm{Pb}} value, about 4.17% smaller compared to the bulk, which might be related to distortions of the center cation displacement (CD) caused by highly electronegative ions (F) present in the PP-cation. The average volumes of the PbI6_6-octahedra (VavOctV_{\mathrm{av}}^{Oct}) found in the thin films are relatively close to the value found in the bulk MAPbI3_3. In fact, small variations in VavOctV_{\mathrm{av}}^{Oct} are observed due to the effects of organic molecules on the Pb–I bonds. In this way, the structural properties of 2D perovskites have a strong dependence on the physicochemical properties of the PP-cation used as a passivator.

Adsorption and Interaction Energies of P-Cation on Perovskite Slabs

To assess the energy stability of the PP-cation under passivation in thin perovskites films, we calculated the energies of adsorption (EadE_{ad}) and interaction (EintE_{int}) for all materials. EadE_{ad} can be computed using the following equation,

Ead=(Etot2D perovskite−Etotslab relaxed−8×EtotA−cation free)/8(1)E_{ad} = \left(E_{\mathrm{tot}}^{2D\ perovskite} - E_{\mathrm{tot}}^{slab\ relaxed} - 8 \times E_{\mathrm{tot}}^{A-cation\ free}\right)/8 \tag*{(1)}

where Etot2D perovskiteE_{\mathrm{tot}}^{2D\ perovskite} is the total energy of the 2D perovskite, while Etotslab relaxedE_{\mathrm{tot}}^{slab\ relaxed} is the total energy of the optimized perovskite slabs through the stress-tensor without the 8 PP-cations adsorbates, the EtotA−cation freeE_{\mathrm{tot}}^{A-cation\ free} is the total energy of the free PP-cation and 8 is the number of PP-cations removed from the slab. For EintE_{int}, the following equation was used,

Eint=(Etot2D perovskite−Etotslab frozen−EtotA−cation frozen)/8(2)E_{int} = \left(E_{\mathrm{tot}}^{2D\ perovskite} - E_{\mathrm{tot}}^{slab\ frozen} - E_{\mathrm{tot}}^{A-cation\ frozen}\right)/8 \tag*{(2)}

where Etotslab frozenE_{\mathrm{tot}}^{slab\ frozen} and EtotA−cation frozenE_{\mathrm{tot}}^{A-cation\ frozen} are, respectively, the total energies of the frozen perovskite slab and the 8 PP-cation frozen in their optimized geometric positions. The results EadE_{ad} and EintE_{int} are shown in Figure 9.

Figure 9. Adsorption (EadE_{ad}) and interaction (EintE_{int}) energies for PP-cations molecules on perovskite monolayer and bilayer structures.

The adsorption and interaction of PP-cations in perovskite slabs are favorable and exhibit significant energetic stability for all systems, including both monolayers and bilayers. This is evident from the magnitude of the values EadE_{ad} and EintE_{int}, compared to those reported for the polar and nonpolar adsorption of several molecules on the MoS2_2 surface.62 This can be explained by the attractive Coulomb interaction between the opposite charges of the PP-cations and the inorganic slab. Nevertheless, the findings suggest that bilayer systems are more energetically stable than those of the respective monolayers, possibly because of the quantum confinement effect.

For most systems, the 2D organic component of the PP-cations provides the highest energetic contribution to the 2D perovskites, resulting in a smaller difference between the EintE_{int} values of the monolayer and bilayer systems. When comparing passivated systems with oxygenated PP-cations with those without oxygen, we observe a modest reduction in EintE_{int}. Furthermore, for the system passivated with 5FBz, lower values of EintE_{int} and EadE_{ad} are obtained, possibly due to the repulsive effect between the F−^{-} and I−^{-} species.

The physicochemical descriptors that characterize organic molecules can be used to monitor the adsorption of PP-cations, suggesting that the molecular structure of PP-cations contributes to better adsorption in thin films. Molecules capable of forming more H-bonds are energetically favorable, exhibiting higher negative EadE_{ad} values. According to the findings, PP-cations with oxygenated groups and π\pi-bonds had lower values of EadE_{ad}, possibly related to their increased stability in the gas phase compared to other organic structures.

With respect to EintE_{int}, the molecular chemistry of the PP-cations does not appear to be a determining factor. Similar behavior is observed between the monolayers and their corresponding bilayers, leading to the conclusion that the interaction forces between the PP-cation and the slab are generally similar between 1L and 2L. The AMeA structure has the lowest EadE_{ad} and EintE_{int} values among all systems, which may be related to a molecular structure with a higher number of H atoms, energetically favored by H-bonds.

Charge Transfer via Effective Charges Analysis

To enhance our atomistic understanding, we calculated the magnitude of the charge transfer using the density derived electrostatic and chemical (DDEC) method.[47, 48] To evaluate the magnitudes of the charges in the systems, we conducted a local charge analysis investigating the magnitudes of the charges for specific moieties within the full system. Therefore, we determined the average charges of the PP-cation (QeffPQ^{P}_{eff}), the radical RR bonded to the R–NH3_3 group (QeffRQ^{R}_{eff}), nitrogen (QeffNQ^{N}_{eff}), the hydrogen bonded to the N (QeffHQ^{H}_{eff}), lead (QeffPbQ^{Pb}_{eff}), and iodine (QeffIQ^{I}_{eff}). The results are visually presented in Figure 10, with additional details available in the SI.

Effective DDEC charges for monolayer, bilayer, and bulk MAPbI3

Figure 10. Effective DDEC charges for the PP-cation, radical RR, nitrogen and hydrogen both from NH3_3 group, lead and iodine, which are indicated by QeffPQ^{P}_{eff}, QeffRQ^{R}_{eff}, QeffNQ^{N}_{eff}, QeffHQ^{H}_{eff}, QeffPbQ^{Pb}_{eff} and QeffIQ^{I}_{eff}, respectively.

The charge transfer process emerges from the interaction effect between the PP-cation (acid = proton donor) and the halides (base = proton acceptor) through Brønsted–Lowry acid-base behavior, leading to charge transfer occurrence. In this way, QeffPQ^{P}_{eff} can offer us useful information on the charge mechanism. More precisely, our data support a charge transfer mechanism through N–H···I–Pb interactions, where the magnitude depends on the type of PP-cation.

The presence of electronegative groups in the carbon chains of PP-cations improves the polarity of bulk organic compounds, as illustrated in Figure 7 for the GABA molecule. This directly influences the QeffPQ^{P}_{eff} values and, consequently, the charger transfer process. As mentioned previously, the presence of oxygenated groups induces H-bond interactions while simultaneously reducing the van der Waals gap, resulting in improved optoelectronic properties. This includes the effective localization of charges within the PP-cations regions, facilitating the formation of "charged bridges".[28] This phenomenon, in turn, promotes the overlap of charge densities in adjacent inorganic layers, thereby enhancing the efficiency of charge transfer optimization between these layers.

Due to the resonance electronic characteristics provided by π\pi-bonds, which can alter charge donation to the inorganic slab,

can alter charge donation to the inorganic slab, the aromatic PP-cation passivator exhibits charge transfer dynamics.59 The QeffPQ^{P}_{eff} deviations for those cations can be explained by the presence of withdrawing groups or electron density donors. When groups with stronger electron density donor properties are introduced, the Brønsted–Lowry acid character of the PP-cation increases. This leads to a slight increase in QeffPQ^{P}_{eff}; for example, we found an increase of about 5% in QeffPQ^{P}_{eff} when comparing the effects for the An2_2PbI4_4 and PEA2_2PbI4_4 films.

The calculated charge values for radicals RR (QeffRQ^{R}_{eff}), which affect the polarity of the cation and subsequently the charge transfer process, can also be used to explain the values of QeffPQ^{P}_{eff}. As mentioned above, radicals with highly electronegative groups may form localized interlayer charges. Therefore, due to the inductive effect produced by molecular dipoles, lower levels of QeffRQ^{R}_{eff} might result in higher QeffPQ^{P}_{eff} values.

Due to the quantum confinement effects present in 2D systems, there is an impact on the results for the charge properties of the inorganic slabs. First, the Pb (QeffPbQ^{Pb}_{eff}) reveal lower values for the 2D system compared to the bulk system. Furthermore, as observed for 5FBz2_2PbI4_4, the PP-cation 5FBz strongly influences the Pb–I bond distances, and as result, we can relate these distortions to the lowest value of QeffPbQ^{Pb}_{eff} found for this film.

However, our results support the notion that the number of inorganic slabs increases the negative charge on the halides (QeffIQ^{I}_{eff}) with values close to QeffIQ^{I}_{eff} found for the halides in the bulk MAPbI3_3 structure. This shows that systems with n>1n > 1 have the greatest potential for photovoltaic applications. This observation is consistent with the findings of the existing literature.63

Electron Density Difference

To improve our understanding on the charge transfer process, we performed an electron density difference analysis using the following equation,

Δρ=ρP cation/slab−(ρP cation+ρslab),(3)\Delta\rho= \rho^{P\ \mathrm{cation/slab}} - \left(\rho^{P\ \mathrm{cation}} + \rho^{\mathrm{slab}}\right), \tag*{(3)}

where ρP cation/slab\rho^{P\ \mathrm{cation/slab}} is the total electron density of 2D perovskites, ρP cation\rho^{P\ \mathrm{cation}} is the electron density of the isolated PP-cation, ρslab\rho^{\mathrm{slab}} is the electron density of the inorganic slab, all fragments are frozen with respect to the optimized structure with equilibrium volume (V0V_0). For bilayers, the results Δρ\Delta\rho are shown in Figure 11, while the results for the remaining systems are shown in the supporting information.

Electron density difference isosurfaces for bilayer perovskites

Figure 11. Electron density difference isosurfaces (0.0015 bohr−30.0015\ \mathrm{bohr}^{-3}) for bilayer perovskites. The yellow and blue regions indicate the accumulation and depletion of charge, respectively.

The electron density difference results support the DDEC charge analyses, allowing us to present a comprehensive depiction of the charge-transfer mechanism. This involves a detailed examination of the accumulation and depletion of charges in specific sites in the 2D structures. In general, the values of Δρ\Delta\rho suggest that there is an accumulation of charge in the halide. Furthermore, we observe different proportions of charge depletion along the PP-cations for both monolayers and bilayers after thin film passivation, which confirms

the transfer of charge from PP-cations to iodides.

Due to the high electronegative character of fluoride, such systems exhibit substantial charge depletions near the ring carbons when we have a perfluorobenzen, 5FBz. This effect decreases when only a monosubstitution is considered in the para-position, as in FPEA, and also has the effect of increasing the chain, influencing these results for this PP-cation.

Similarly, charge depletions in carbons bonded to oxygenated groups, –OH and –COOH, support the assumption that such groups reduce the van der Waals gap and cause charge localization due to polarity and intermolecular interactions. To corroborate the notion of charge transfer through H+^+ transfer, we observe charge depletions in one of the H bonds to N in both organic molecules, PP-cations, and MA interlayers. Furthermore, the observation that stabilization of organic cations occurs through interaction with the inorganic slab, N–H···I–Pb, is consistent with experimental data.[28]

In fact, we found charge accumulations near the N atoms, highlighting the essential characteristic of the R−NH3R-\mathrm{NH}_3 group. These charge accumulations correlate with the values described above QeffRQ^{\mathrm{R}}_{\mathrm{eff}}. In bilayer systems, MA interlayer molecules exhibit behavior similar to that observed in PP-cations. This behavior results in charge depletion in one of the H atoms of −NH3-\mathrm{NH}_3 as well as in C due to the electronegativity difference between C–N. Consequently, there is also charge accumulation near the N atom for these molecules.

Local Density of States

To characterize the electronic states near the band gap region (valence-band maximum (VBM) and conduction-band minimum (CBM) states), we conducted an in-depth analysis of the local density of states (LDOS). All results are shown in Figure 12.

Figure 12. Local density of states for 2D perovskites-based materials, the valence band maximum was set at 0 eV (vertical dashed line).

According to our findings, the band gap region for all structures has direct contributions from the pp-states of iodide ions and the ss- and pp-states of lead atoms. Therefore, distortions of the PbI6\mathrm{PbI}_6-octahedra play a crucial role in the energy band gap window of 2D perovskites. Thus, all of the descriptors that influence the distortions of the PbI6\mathrm{PbI}_{6}-octahedra reported here affect the gap values of the structures.

We can also find contributions of electronic states to PP-cations close to the band gap region for those containing cyclic aryl chains and electronegative groups (–OH, –COOH). According to LDOS, the contributions of the pp-states of O are shown in the VBM and CBM, and interactions through H-bonds can influence the peak intensity and the energetic position of the states. In addition, we have contributions from the pp-states to the structures with S (ThMA) and F (FPEA and 5FBz) atoms, which may be associated with the energetic stability of the system.[19]

The LDOS results for structures passivated with alkyl-type chain PP-cations suggest the necessity of selecting cations with larger molecular radii. These structures exhibit contributions from the pp-states of C as a function of the size of the PP-cation. It is possible to observe the appearance of the pp- and ss-states of C and H, respectively, for PP-cations composed of carbon chains with more than three carbons. The data also indicate that the pp-states of N are slightly above the states of C and H and slightly below the pp-states of iodine. However, because of their low abundance compared to the total number of atoms in the system, the NN states exhibit low intensity. From an electronic point of view, aromatic PP-cations may outperform alkyl cations due to the symmetry properties of the π\pi-bonds. In these systems, we found contributions from the organic molecule states closest to the VBM. However, we observed pp-states of C predominantly in the CBM. These findings imply that aromatic PP-cations positively contribute to improved system stability and improve the charge transfer mechanism, thus improving hole mobility between organic and inorganic layers and, finally, increasing the conductivity of the 2D perovskite.[33]

Fundamental Energy Band Gaps

The electronic energy band gap (EgE_g) was measured by the energy difference between the VBM and the CBM. These data are important to characterize the photovoltaic performance of PSCs.64 Therefore, we qualitatively investigated the role of specific PP-cations in the EgE_g behavior. The corresponding results for EgE_g are presented in Figure 13.

Figure 13. The PBE+D3 electronic band gap (EgE_g) for the 2D perovskites, in addition, we report as reference the MAPbI3_3 bulk band gap (dashed blue line) also obtained via PBE+D3 at Γ\Gamma-point. In the mid panel, we have the work function (Φ\Phi) and in the bottom panel the induced work function change (ΔΦ\Delta\Phi) both also calculated by the PBE+D3 level for all studied materials.

Our findings suggest that the second layer plays a role in the decrease in the values of EgE_g, as the quantum confinement effect is less pronounced in these systems compared to the corresponding monolayers.[54] Therefore, the contribution of the states PbI6\mathrm{PbI}_{6}-octahedra plays an important role in this reduction, which aligns with the findings of the LDOS analyzes.

However, variations in EgE_g may result from intermolecular interactions. The GABA PP-cation binding mechanism, similar in both systems, may be related to the slight differences in EgE_g that we found for the monolayer and bilayer GABA systems. Furthermore, the presence of –OH and –COOH groups in molecular structures can induce a decrease in EgE_g of 2D perovskites, compared to PP-cations without oxygenated groups and the same number of carbons. Interestingly, synthesized crystals BtA2MAPb2I7\mathrm{BtA}_{2}\mathrm{MAPb}_{2}\mathrm{I}_{7} and GABA2MAPb2I7\mathrm{GABA}_{2}\mathrm{MAPb}_{2}\mathrm{I}_{7} crystals exhibit this similar pattern.[28]

Work Function

The work function (Φ\Phi) is a key parameter that characterizes the energy barrier for electron transfer between the perovskite and the electron transport layer in the PSCs.64 In this work, Φ\Phi is defined as the energy difference between the highest occupied state (VBM) and the electrostatic potential value within the vacuum region. We also evaluate the induced change in work function with respect to the clean surface slab, ΔΦ=ΦP cation/slab−Φslab\Delta\Phi= \Phi^{P\ \mathrm{cation}/\mathrm{slab}} - \Phi^{\mathrm{slab}}. All the results of Φ\Phi and ΔΦ\Delta\Phi are shown in Figure 13.

Our findings reveal that in general Φ\Phi is highly sensitive to surface conditions, depending exclusively on the type of PP-cation adsorbed in the system, making Φ\Phi thickness independent. PP-cations with terminal atoms more electronegative than iodides (e.g. oxygen and fluorine) increase the value of Φ\Phi due to the influence on charge transfer and dipole moment. In this way, we observe an increase in Φ\Phi of 9.67%, 18.09% and 14.16%, respectively, for the EtOH, PrOH, and FPEA bilayers compared to their respective PP-cation bilayers without electronegative atoms (EtA, PrA, and PEA). Consequently, there is a reduction in Φ\Phi for the terminal atoms of ligands that exhibit higher electropositivity. These findings corroborate the existing literature; Zheng et al. demonstrated a decrease in Φ\Phi as X is replaced in the order of F, Cl, Br and I within the molecular structure of 3-XPEA when used as the PP-cation.65

However, there exists a difference in effects when comparing PP-cations with terminal groups –OH and –COOH, with an increase in Φ\Phi observed for PP-cations possessing –OH and a reduction in Φ\Phi for those bearing –COOH, as demonstrated by ΔΦ\Delta\Phi. This can be elucidated by the different acidic nature of PP-cations with –OH and –COOH groups, the latter exhibiting a greater acidic character and, as a result, the ability to dissociate easily to release a hydrogen ion and therefore decreasing the Φ\Phi. Therefore, the charge transfer mechanism significantly influences the results of Φ\Phi.

Band off Set

The band offset for all 2D perovskites was achieved by adjusting their eigenvalues in relation to the vacuum energy level. The results are shown in Figure 14. The band alignment of 2D perovskites is influenced by two distinct phenomena: (i) the passivation effects of PP cations and (ii) the quantum confinement effects. In this way, we investigated these effects and their implications for the electronic structure and properties of these materials.

PBE+D3 VBM and CBM, in pink and green respectively, of 2D perovskites-based materials in equilibrium lattice parameters with respect to vacuum level

Figure 14. PBE+D3 VBM and CBM, in pink and green respectively, of 2D perovskites-based materials in equilibrium lattice parameters with respect to vacuum level (zero energy).

According to the LDOS data, the chemistry of PP-cations has a significant impact on band alignment because of its contributions from states near the band gap region, which affects the location of valence states in thin films. The VBM and CBM shifts towards lower energy levels are visible in PP-cations functionalized with OH groups. The behavior of the 2L system mirrors that of the 1L EtOH system, with a VBM and CBM energy drop of 16.71% and 28.12%, respectively, compared to the EtA system. This impact is also evident when the PP-cation is functionalized with fluorine (FPEA), resulting in a 23.52% decrease in VBM and a 38.29% decrease in CBM compared to the system with PEA as the PP-cation, for the same thickness. Comparing the 1L and 2L systems reveals a higher percentage variation in the CBM values; as a result, the influence of quantum confinement is more perceptible in the CBM regions, changing this eigenvalue to more negative values and reducing the band gap values in 2L systems. The energy states created by quantum confinement can facilitate charge separation and transport within 2D perovskite heterostructures. When the layer thickness is tuned, it becomes possible to design heterostructures with favorable band alignments for efficient charge carrier dynamics, offering promise for applications such as PSCs.

Absorption Coefficient and Optical Band Gap

The absorption spectrum is qualitatively investigated using the PBE+D3 level. All results are shown in Figure 15. The behavior of the optical absorption coefficient spectra here responds as a function of the passivation of the selected PP-cation, similar to the electronic descriptors studied previously. Furthermore, we observe that the absorption spectra exhibit a trend similar to that of EgE_g, with the emission wavelength increasing as the number of nn-layers rises.

Optical absorption coefficient spectra of monolayer and bilayer 2D perovskites

Figure 15. Optical absorption coefficient, obtained from PBE+D3, of the monolayer (black line) and bilayer (red line) 2D perovskites. EgopticE_g^{\mathrm{optic}} values are indicated by dashed lines

The optical band gap (EgopticE_g^{\mathrm{optic}}) can be defined by the first allowed electronic transition with nonzero magnitude.[17] We found that EgopticE_g^{\mathrm{optic}} is equivalent to the fundamental band gaps (EgE_g) obtained from the predicted absorption coefficient spectra. These spectra only include direct transitions from the valence band to the conduction band. This observation supports the idea that the promotion of electrons from the VBM to the CBM through energy photon absorption occurs for our models. It should be noted that our models do not have structural defects (such as point defects, edges, and grain boundaries), which are typically considered in experimental absorption spectra.66 Thus, surface passivation with an organic ammonium cation is effective in modifying the structural and optoelectronic properties of materials based on 2D perovskites, leading to improved device performance.

Insights into the Selection of P-Cations for the Passivation of Two-Dimensional Perovskites

In summary, our calculations have provided a fundamental characterization of the structural and optoelectronic properties of 2D thin films perovskites against different types of passivating organic molecules. Therefore, the choice of the best PP-cation naturally starts with the main application of the material. However, on the basis of our results, we can give some general directions for the choice of PP-cation for optoelectronic applications.

Alkylammonium PP-cations molecules: Passivation by aliphatic organic cations with short chains, such as (NRxH4−x)+(\mathrm{NR}_x\mathrm{H}_{4-x})^+ with x=1−2x = 1 - 2, may have drawbacks compared to organic compounds with longer chains. Our findings indicate that the energy stability of perovskite-based materials increases with increasing carbon chain of alkylammonium PP-cations. Ye et al. 67 show that passivation using PP-cations with 5 carbons in the primary organic chain improves the PCE of PSCs compared to data for PP-cations with 4 and 2 carbons. Importantly, PP-cations from short carbon chains exhibit instabilities when exposed to humidity and temperature conditions, which can cause structural defects and reduce the efficiency of the material.

Alcohol and Carboxylic acids PP-cations molecules: Organic cations functionalized with –OH and –COOH groups promote additional intermolecular interactions compared to molecular structures without these functional groups, achieved through H-bonds. Our results demonstrate an increase in energetic stability via passivation by such PP-cations. Furthermore, the inclusion of oxygenated groups promotes H-bond interactions while reducing the van der Waals gap, leading to improved optoelectronic characteristics. Charges are effectively located within the PP-cation sites, enabling the formation of "charged bridges", as also noted by Li et al.et\ al.[28] This effect, in turn, enhances charge concentrations, promoting overlap in adjacent inorganic layers and, thus, optimizing charge transfer efficiency between them.

Aromatic PP-cations molecules: Aromatic molecules can offer distinct benefits when compared to aliphatic cations due to their bulkier conjugated structure.59 The conjugated structure of aromatic cations enhances the stability of 2D perovskites and controls crystal arrangement and orientation via π⋯π\pi\cdots\pi interactions and H bonds. This results in a more stable 2D perovskite by minimizing the slippage of inorganic slabs along the van der Waals gap direction.

Fluorinated PP-cations molecules: According to our findings, PP-cations with high number of F atoms in their molecular structure can reduce energy stability via EadE_{\mathrm{ad}} and EintE_{\mathrm{int}} energies, as observed in the 5FBz system containing 5 F atoms bound to the aromatic ring, resulting in interhalide repulsion energies. However, as the F content in the structure decreases, this impact decreases linearly, as seen in the FPEA system. The F bound at the para position to the aromatic ring can induce structural stability through dipole-dipole interactions, encouraging stronger H-bonds than H⋯\cdotsI-type interactions. In a study by Liu et al.68, it was shown that the 2D perovskite with the aromatic formamidinium fluorinated at the para position, namely p-FPhFA, exhibits significantly longer charge carrier lifetime, hole mobility, and lower trap density compared to a 2D perovskite with an unfluorinated PP-cation.

Based on the insights presented, we selected three main PP-cations with the greatest potential for application in PSC: FPEA, PEA, and BtA. We believe that such molecular structures can improve the properties of thin films during passivation, thus resulting in 2D structures with greater performance.

Conclusions

We performed DFT calculations to investigate the role of organic mono­cations on the passivation of thin films of 2D perovskites. The perovskites have a general chemical formula of P2(MAn−1)PbnI3n+1P_{2}(\mathrm{MA}_{n-1})\mathrm{Pb}_{n}\mathrm{I}_{3n+1}, where n=1n=1 (monolayer) and n=2n=2 (bilayer). Our findings suggest that passivation has a significant impact on the structural and optoelectronic properties of ultrathin perovskites films, which can provide insight into the performance of the materials.

Interactions between organic cations and the anionic surface of 2D perovskite films promote distortions in the lattice parameters, which are due to the physicochemical character of the organic molecule acting as PP-cation. For example, the 5FBz bilayer system showed the lowest ECNavPb\mathrm{ECN}_{\mathrm{av}}^{\mathrm{Pb}} value, approximately 4.17% smaller than the bulk, probably due to distortions in the center cation displacement caused by highly electronegative fluorine ions in the PP-cation. Our results indicate that the size of the PP-cation and the presence of intermolecular and intramolecular interactions influence the lattice parameters, which can provide insight into the energetic stability of compounds, including H-bonds. Therefore, different PP-cations induce different deformations in the distances and bond angles within the PbI6\mathrm{PbI}_{6}-octahedra.

Our study delves into the dynamics of charge transfer from the PP-cations to the inorganic framework of the systems. The binding mechanism results in the charge transfer from the –NH3_3 group to the inorganic slab, causing charge accumulations in halides and indicating the behavior of the Brønsted–Lowry acid base between PP-cations and slabs. Consequently, charge depletions are observed near the sites of H and C bonded to electronegative groups. In particular, our results demonstrated that the aromatic PP-cation cations showed the impact of electronic characteristics of the π\pi-bond resonance, for example, we found an increase of approximately 5% in QeffPQ_{\mathrm{eff}}^{P} when comparing the effects for the An2_2PbI4_4 and PEA2_2PbI4_4 films. Radicals with highly electronegative groups induce localized interlayer charges, which contributes to higher QeffPQ_{\mathrm{eff}}^{P} values. Quantum confinement effects in 2D systems affect the charge properties of inorganic slabs, with lower QeffPbQ_{\mathrm{eff}}^{Pb} values, suggesting that increasing the number of inorganic layers can enhance the negative charge on the halides, indicating the photovoltaic potential.

Our findings show that the band gap region in all structures is directly influenced by the pp-states of iodides and the ss- and pp-states of lead. Structural descriptors that affect PbI6_6-octahedra distortions have a direct impact on gap values. Further analysis reveals significant electronic state contributions from PP-cations near the band gap region, especially for cyclic aryl chains and electronegative groups (−OH, −COOH). LDOS indicates prominent O pp-states in both the VBM and the CBM, influenced by H-bond interactions. Additional contributions from the S (ThMA) and F (FPEA and 5FBz) atoms are observed, potentially contributing to energetic stability. The LDOS results advocate for larger molecular radii in cations, especially for alkyl-type chain PP-cations. Electronic analysis suggests that aromatic PP-cations outperform alkyl cations due to the symmetry properties of π\pi-bonds, enhancing the stability of the system, charge transfer, hole mobility and conductivity in 2D perovskites films.

From the results, we selected three main PP-cations for PSC application: FPEA, PEA, and BtA. These organic structures can improve thin film properties during passivation, enhancing perovskites-based devices’ performance.

Acknowledgement

The authors acknowledge Dr. Srikanth Malladi for his contributions to the construction of the initial models, which played a crucial role for the success of the present study. The authors express their gratitude for the support received from various organizations. They appreciate the assistance provided by FAPESP (São Paulo Research Foundation, Brazil) through grant numbers 2017/11631-2 and 2018/21401-7, Shell and the strategic importance of the support provided by ANP (Brazil’s National Oil, Natural Gas and Biofuels Agency) through the R&D levy regulation. The ICR extends its thanks to the National Council for Scientific and Technological Development (CNPq) for the Ph.D. fellowship, which was granted under the numbers 140015/2021-3. AFAB also acknowledges financial support from FAPESP, grant numbers 2017/11937-4 and 2022/1278-5 (Postdoctoral fellowship) and PIRM acknowledges financial support from FAPESP, grant number 2023/12824-0 (Postdoctoral fellowship). The authors are also grateful for the infrastructure support offered by the Department of Information Technology - Campus São Carlos for our computer cluster.

Supporting Information Available

The data used for the figures, as well as additional analyzes and technical details, are reported in the electronic supplementary material.

TOC Graphic

Figure 16 (PDF p. 27). Organic Cation Selection; Do not induce strong deformations in the inorganic framework; Low values of adsorption and interaction energies; Low electronic states contributions at band gap windon; Ability to act as charge donor; FPEA; BtA; PEA

References

  1. [1]1 Kojima, A.; Teshima, K.; Shirai, Y.; Miyasaka, T. Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells. J. Am. Chem. Soc. 2009, 131, 6050–6051, DOI: 10.1021/ja809598r.DOI
  2. [2]2 Gao, D.; Li, B.; Li, Z.; Wu, X.; Zhang, S.; Zhao, D.; Jiang, X.; Zhang, C.; Wang, Y.; Li, Z.; Li, N.; Xiao, S.; Choy, W. C. H.; Jen, A. K.-Y.; Yang, S.; Zhu, Z. Highly Efficient Flexible Perovskite Solar Cells through Pentylammonium Acetate Modification with Certified Efficiency of 23.35%. Adv. Mater. 2023, 35, 2206387, DOI: 10.1002/adma.202206387.
  3. [3]3 Zheng, Y.; Li, Y.; Zhuang, R.; Wu, X.; Tian, C.; Sun, A.; Chen, C.; Guo, Y.; Hua, Y.; Meng, K.; Wu, K.; Chen, C.-C. Towards 26% Efficiency in Inverted Perovskite Solar Cells via Interfacial Flipped Band Bending and Suppressed Deep-level Traps. Energy Environ. Sci. 2024, 17, 1153–1162, DOI: 10.1039/D3EE03435F.
  4. [4]4 De Wolf, S.; Holovsky, J.; Moon, S.-J.; Löper, P.; Niesen, B.; Ledinsky, M.; Haug, F.-J.; Yum, J.-H.; Ballif, C. Organometallic Halide Perovskites: Sharp Optical Absorption Edge and Its Relation to Photovoltaic Performance. J. Phys. Chem. Lett. 2014, 5, 1035–1039, DOI: 10.1021/jz500279b.DOI
  5. [5]5 Park, N.-G. Perovskite Solar Cells: An Emerging Photovoltaic Technology. Mater. Today 2015, 18, 65–72, DOI: 10.1016/j.mattod.2014.07.007.DOI
  6. [6]6 Zhang, W.; Saliba, M.; Stranks, S. D.; Sun, Y.; Shi, X.; Wiesner, U.; Snaith, H. J. Enhancement of Perovskite-Based Solar Cells Employing Core–Shell Metal Nanoparticles. Nano Lett. 2013, 13, 4505–4510, DOI: 10.1021/nl4024287.DOI
  7. [7]7 Ponseca, C. S., Jr.; Savenije, T. J.; Abdellah, M.; Zheng, K.; Yartsev, A.; Pascher, T.; Harlang, T.; Chabera, P.; Pullerits, T.; Stepanov, A.; Wolf, J.-P.; Sundström, V. Organometal Halide Perovskite Solar Cell Materials Rationalized: Ultrafast Charge Generation, High and Microsecond-Long Balanced Mobilities, and Slow Recombination. J. Am. Chem. Soc. 2014, 136, 5189–5192, DOI: 10.1021/ja412583t.DOI
  8. [8]8 Stoumpos, C. C.; Malliakas, C. D.; Kanatzidis, M. G. Semiconducting Tin and Lead Iodide Perovskites With Organic Cations: Phase Transitions, High Mobilities, and Near-Infrared Photoluminescent Properties. Inorg. Chem. 2013, 52, 9019–9038, DOI: 10.1021/ic401215x.DOI
  9. [9]9 Lekina, Y.; Shen, Z. X. Excitonic States and Structural Stability in Two-Dimensional Hybrid Organic-Inorganic Perovskites. J. Sci.: Adv. Mater. Dev. 2019, 4, 189–200, DOI: 10.1016/j.jsamd.2019.03.005.DOI
  10. [10]10 Paritmongkol, W.; Dahod, N. S.; Stollmann, A.; Mao, N.; Settens, C.; Zheng, S.-L.; Tisdale, W. A. Synthetic Variation and Structural Trends in Layered Two-dimensional Alkylammonium Lead Halide Perovskites. Chem. Mater. 2019, 31, 5592–5607, DOI: 10.1021/acs.chemmater.9b01318.DOI
  11. [11]11 Danelon, J. G.; Santos, R. M.; Dias, A. C.; Da Silva, J. L. F.; Lima, M. P. Contrasting the Stability, Octahedral Distortions, and Optoelectronic Properties of 3D MABX3 and 2D (BA)2(MA)2BX7 (B = Ge, Sn, Pb; X = Cl, Br, I) Perovskites. Phys. Chem. Chem. Phys. 2024, 26, 8469–8487, DOI: 10.1039/D3CP04361D.DOI
  12. [12]12 Zhang, M.; Tai, M.; Li, X.; Zhao, X.; Chen, H.; Yin, X.; Zhou, Y.; Zhang, Q.; Han, J.; Wang, N.; Lin, H. Improved Moisture Stability of Perovskite Solar Cells Using N719 Dye Molecules. Solar RRL 2023, 3, DOI: 10.1002/solr.201900345.
  13. [13]13 Sun, Y.; Fang, X.; Ma, Z.; Xu, L.; Lu, Y.; Yu, Q.; Yuan, N.; Ding, J. Enhanced UV-Light Stability of Organometal Halide Perovskite Solar Cells with Interface Modification and a UV Absorption Layer. J. Mater. Chem. C 2017, 5, 8682–8687, DOI: 10.1039/C7TC02603J.DOI
  14. [14]14 Chi, W.; Banerjee, S. K. Achieving Resistance against Moisture and Oxygen for Perovskite Solar Cells with High Efficiency and Stability. Chem. Mater. 2021, 33, 4269–4303, DOI: 10.1021/acs.chemmater.1c00773.DOI
  15. [15]Adil Afroz, M.; Ghimire, N.; Reza, K. M.; Bahrami, B.; Bobba, R. S.; Gurung, A.; Chowdhury, A. H.; Iyer, P. K.; Qiao, Q. Thermal Stability and Performance Enhancement of Perovskite Solar Cells Through Oxalic Acid-Induced Perovskite Formation. ACS Appl. Energy Mater. 2020, 3, 2432–2439, DOI: 10.1021/acsaem.9b02111.DOI
  16. [16]Wang, F.; Cao, Y.; Chen, C.; Chen, Q.; Wu, X.; Li, X.; Qin, T.; Huang, W. Materials Toward the Upscaling of Perovskite Solar Cells: Progress, Challenges, and Strategies. Adv. Funct. Mater. 2018, 28, 1803753, DOI: 10.1002/adfm.201803753.DOI
  17. [17]dos Santos, R. M.; Ornelas-Cruz, I.; Dias, A. C.; Lima, M. P.; Da Silva, J. L. F. Theoretical Investigation of the Role of Mixed A+ Cations in the Structure, Stability, and Electronic Properties of Perovskite Alloys. ACS Appl. Energy Mater. 2023, 6, 5259–5273, DOI: 10.1021/acsaem.3c00186.DOI
  18. [18]Ribeiro, I. C.; Moraes, P. I. R.; Bittencourt, A. F. B.; Da Silva, J. L. F. Role of the Adsorption of Alkali Cations on Ultrathin n-Layers of Two-Dimensional Perovskites. J. Phys. Chem. C 2023, 127, 13667–13677, DOI: 10.1021/acs.jpcc.3c01894.DOI
  19. [19]Hu, J.; Oswald, I. W. H.; Hu, H.; Stuard, S. J.; Nahid, M. M.; Yan, L.; Chen, Z.; Ade, H.; Neilson, J. R.; You, W. Aryl-Perfluoroaryl Interaction in Two-Dimensional Organic–Inorganic Hybrid Perovskites Boosts Stability and Photovoltaic Efficiency. ACS Mater. Lett. 2019, 1, 171–176, DOI: 10.1021/acs materialeslett.9b00102.DOI
  20. [20]Bi, C.; Zheng, X.; Chen, B.; Wei, H.; Huang, J. Spontaneous Passivation of Hybrid Perovskite by Sodium Ions from Glass Substrates: Mysterious Enhancement of Device Efficiency Revealed. ACS Energy Lett. 2017, 2, 1400–1406, DOI: 10.1021/acsenergylett.7b00356.DOI
  21. [21]Li, Y.; Wu, H.; Qi, W.; Zhou, X.; Li, J.; Cheng, J.; Zhao, Y.; Li, Y.; Zhang, X. Passivation of Defects in Perovskite Solar Cell: From a Chemistry Point of View. Nano Energy 2020, 77, 105237, DOI: 10.1016/j.nanoen.2020.105237.DOI
  22. [22]Zhang, F.; Kim, D. H.; Zhu, K. 3D/2D Multidimensional Perovskites: Balance of High Performance and Stability for Perovskite Solar Cells. Current Opinion in Electrochemistry 2018, 11, 105–113, DOI: 10.1016/j.coelec.2018.10.001.DOI
  23. [23]Gangadharan, D. T.; Ma, D. Searching for Stability at Lower Dimensions: Current Trends and Future Prospects of Layered Perovskite Solar Cells. Energy & Environmental Science 2019, 12, 2860–2889, DOI: 10.1039/c9ee01591d.DOI
  24. [24]Lee, H. B.; Kumar, N.; Tyagi, B.; He, S.; Sahani, R.; Kang, J.-W. Bulky Organic Cations Engineered Lead-Halide Perovskites: a Review on Dimensionality and Optoelectronic Applications. Mater. Today Energy 2021, 21, 100759, DOI: 10.1016/j.mtener.2021.100759.DOI
  25. [25]Ruddlesden, S. N.; Popper, P. New Compounds of the K2NiF4 type. Acta Crystallographica 1957, 10, 538–539, DOI: 10.1107/s0365110x57001929.
  26. [26]Gélvez-Rueda, M. C.; Gompel, W. T. M. V.; Herckens, R.; Lutsen, L.; Vanderzande, D.; Grozema, F. C. Inducing Charge Separation in Solid-State Two-Dimensional Hybrid Perovskites through the Incorporation of Organic Charge-Transfer Complexes. The Journal of Physical Chemistry Letters 2020, 11, 824–830, DOI: 10.1021/acs.jpc lett.9b03746.
  27. [27]Zhou, N.; Huang, B.; Sun, M.; Zhang, Y.; Li, L.; Lun, Y.; Wang, X.; Hong, J.; Chen, Q.; Zhou, H. The Spacer Cations Interplay for Efficient and Stable Layered 2D Perovskite Solar Cells. Advanced Energy Materials 2019, 10, 1901566, DOI: 10.1002/aenm.201901566.DOI
  28. [28]Li, P.; Yan, L.; Cao, Q.; Liang, C.; Zhu, H.; Peng, S.; Yang, Y.; Liang, Y; Zhao, R.; Zang, S.; Zhang, Y.; Song, Y. Dredging the Charge-Carrier Transfer Pathway for Efficient Low-Dimensional Ruddlesden-Popper Perovskite Solar Cells. Angew. Chem. Int. Ed. 2023, 62, e202217910, DOI: 10.1002/anie.202217910.DOI
  29. [29]Tsai, H.; Liu, F.; Shrestha, S.; Fernando, K.; Tretiak, S.; Scott, B.; Vo, D. T.; Strzalka, J.; Nie, W. A Sensitive and Robust Thin-Film X-ray Detector Using 2D Layered Perovskite Diodes. Science Advances 2020, 6, eaay0815, DOI: 10.1126/sciadv.aay0815.DOI
  30. [30]Wang, H.; Wang, X.; Chen, Y.; Zhang, S.; Jiang, W.; Zhang, X.; Qin, J.; Wang, J.; Li, X.; Pan, Y.; Liu, F.; Shi, Z.; Zhang, H.; Tu, L.; Wang, H.; Long, H.; Li, D.; Lin, T.; Wang, J.; Zhan, Y.; Shen, H.; Meng, X.; Chu, J. Extremely Low Dark Current MoS₂ Photodetector via 2D Halide Perovskite as the Electron Reservoir. Advanced Optical Materials 2020, 8, 1901402, DOI: 10.1002/adom.201901402.DOI
  31. [31]Stoumpos, C. C.; Cao, D. H.; Clark, D. J.; Young, J.; Rondinelli, J. M.; Jang, J. I.; Hupp, J. T.; Kanatzidis, M. G. Ruddlesden–Popper Hybrid Lead Iodide Perovskite 2D Homologous Semiconductors. Chem. Mater. 2016, 28, 2852–2867, DOI: 10.1021/acs.chemmater.6b00847.DOI
  32. [32]Wang, Y.; Xu, H.; Wang, F.; Liu, D.; Chen, H.; Zheng, H.; Ji, L.; Zhang, P.; Zhang, T.; Chen, Z. D.; Wu, J.; Chen, L.; Li, S. Unveiling the Guest Effect of N-butylammonium Iodide Towards Efficient and Stable 2D-3D Perovskite Solar Cells Through Sequential Deposition Process. Chem. Eng. J. 2020, 391, 123589, DOI: 10.1016/j.cej.2019.123589.DOI
  33. [33]Qin, Y.; Zhong, H.; Intemann, J. J.; Leng, S.; Cui, M.; Qin, C.; Xiong, M.; Liu, F.; Jen, A. K.-Y.; Yao, K. Coordination Engineering of Single-Crystal Precursor for Phase Control in Ruddlesden–Popper Perovskite Solar Cells. Adv. Energy Mater.DOI
  34. [34]Cohen, B.-E.; Li, Y.; Meng, Q.; Etgar, L. Dion–Jacobson Two-Dimensional Perovskite Solar Cells Based on Benzene Dimethanammonium Cation. Nano Lett. 2019, 19, 2588–2597, DOI: 10.1021/acs.nanolett.9b00387.DOI
  35. [35]Lao, Y.; Yang, S.; Yu, W.; Guo, H.; Zhou, Y.; Chen, Z.; Xiao, L. Multifunctional π-Conjugated Additives for Halide Perovskite. Adv. Sci. 2022, 9, 2105307, DOI: 10.1002/advs.202105307.DOI
  36. [36]Hohenberg, P.; Kohn, W. Inhomogeneous Electron Gas. Phys. Rev. 1964, 136, B864–B871, DOI: 10.1103/PhysRev.136.B864.DOI
  37. [37]Kohn, W.; Sham, L. J. Self-consistent Equations Including Exchange and Correlation Effects. Phys. Rev. 1965, 140, A1133–A1138, DOI: 10.1103/PhysRev.140.A1133.DOI
  38. [38]Perdew, J. P.; Burke, K.; Ernzerhof, M. Generalized Gradient Approximation Made Simple. Phys. Rev. Lett. 1996, 77, 3865–3868, DOI: 10.1103/PhysRevLett.77.3865.DOI
  39. [39]Kresse, G.; Hafner, J. Ab Initio Molecular Dynamics for Liquid Metals. Phys. Rev. B 1993, 47, 558–561(R), DOI: 10.1103/PhysRevB.47.558.DOI
  40. [40]Kresse, G.; Furthmüller, J. Efficient Iterative Schemes for Ab initio Total-energy Calculations Using a Plane-wave Basis set. Phys. Rev. B 1996, 54, 11169–11186, DOI: 10.1103/physrevb.54.11169.DOI
  41. [41]Blochl, P. E. Projector Augmented-wave Method. Phys. Rev. B 1994, 50, 17953–17979, DOI: 10.1103/PhysRevB.50.17953.DOI
  42. [42]Kresse, G.; Joubert, D. From Ultrasoft Pseudopotentials to the Projector Augmented-wave Method. Phys. Rev. B 1999, 59, 1758–1775, DOI: 10.1103/PhysRevB.59.1758. Moraes, P. I. R.; Bittencourt, A. F. B.; Andriani, K. F.; Da Silva, J. L. F. Theoretical Insights into Methane Activation on Transition-Metal Single-Atom Catalysts Supported on the CeO2(111) Surface. J. Phys. Chem. C 2023, 127, 16357–16366, DOI: 10.1021/acs.jpcc.3c02653.
  43. [44]Grimme, S.; Antony, J.; Ehrlich, S.; Krieg, H. A Consistent and Accurate Ab Initio Parametrization of Density Functional Dispersion Correction (dft-d) for the 94 Elements H–Pu. J. Chem. Phys. 2010, 132, 154104, DOI: 10.1063/1.3382344.DOI
  44. [45]Ozório, M. S.; Oliveira, W. X. C.; Silveira, J. F. R. V.; Nogueira, A. F.; Da Silva, J. L. F. Novel Zero-dimensional Lead-free Bismuth Based Perovskites: From Synthesis to Structural and Optoelectronic Characterization. Mater. Adv. 2020, 1, 3439–3448, DOI: 10.1039/d0ma00791a.DOI
  45. [46]Francis, G. P.; Payne, M. C. Finite Basis Set Corrections to Total Energy Pseudopotential Calculations. Journal of Physics: Condensed Matter 1990, 2, 4395–4404, DOI: 10.1088/0953-8984/2/19/007.DOI
  46. [47]Manz, T. A.; Limas, N. G. Introducing DDEC6 Atomic Population Analysis: Part 1. Charge Partitioning Theory and Methodology. RSC Adv. 2016, 6, 47771–47801, DOI: 10.1039/C6RA04656H.DOI
  47. [48]Limas, N. G.; Manz, T. A. Introducing DDEC6 atomic Population Analysis: Part 2. Computed Results for a Wide Range of Periodic and Nonperiodic Materials. RSC Adv. 2016, 6, 45727–45747, DOI: 10.1039/C6RA05507A.DOI
  48. [49]Marchenko, E. I.; Fateev, S. A.; Petrov, A. A.; Korolev, V. V.; Mitrofanov, A.; Petrov, A. V.; Goodilin, E. A.; Tarasov, A. B. Database of Two-Dimensional Hybrid Perovskite Materials: Open-Access Collection of Crystal Structures, Band Gaps, and Atomic Partial Charges Predicted by Machine Learning. Chemistry of Materials 2020, 32, 7383–7388, DOI: 10.1021/acs.chemmater.0c02290.DOI
  49. [50]Moral, R. F.; Germino, J. C.; Bonato, L. G.; Almeida, D. B.; Therézio, E. M.; Atvars, T. D. Z.; Stransk, S. D.; Nome, R. A.; Nogueira, A. F. Influence of the Vibrational Modes from the Organic Moieties in 2D Lead Halides on Excitonic Recombination and Phase Transition. Advanced Optical Materials 2020, 8, 2001431, DOI: 10.1002/adom.202001431.DOI
  50. [51]Zhang, F.; Lu, H.; Tong, J.; Berry, J. J.; Beard, M. C.; Zhu, K. Advances in Two-Dimensional Organic–Inorganic Hybrid Perovskites. Energy Environ. Sci. 2020, 13, 1154–1186, DOI: 10.1039/c9ee03757h.DOI
  51. [52]Hou, Y.; Wu, C.; Yang, D.; Ye, T.; Honavar, V. G.; van Duin, A. C. T.; Wang, K.; Priya, S. Two-Dimensional Hybrid Organic–Inorganic Perovskites as Emergent Ferroelectric Materials. Journal of Applied Physics 2020, 128, 060906, DOI: 10.1063/5.0016010.DOI
  52. [53]Da Silva, J. L. F.; Stampfl, C.; Scheffler, M. Converged Properties of Clean Metal Surfaces by All-electron First-principles Calculations. Surf. Sci. 2006, 600, 703–715, DOI: 10.1016/j.susc.2005.12.008.DOI
  53. [54]Cheng, B.; Li, T.-Y.; Maity, P.; Wei, P.-C.; Nordlund, D.; Ho, K.-T.; Lien, D.-H.; Lin, C.-H.; Liang, R.-Z.; Miao, X.; Ajia, I. A.; Yin, J.; Sokaras, D.; Javey, A.; RQan, I. S.; Mohammed, O. F.; He, J.-H. Extremely Reduced Dielectric Confinement in Two-Dimensional Hybrid Perovskites with Large Polar Organics. Commun. Phys. 2018, 1, 1–8, DOI: 10.1038/s42005-018-0082-8.DOI
  54. [55]Ozório, M. S.; Srikanth, M.; Besse, R.; Da Silva, J. L. F. The Role of the A-cations in the Polymorphic Stability and Optoelectronic Properties of Lead-Free AsNI3 Perovskites. Phys. Chem. Chem. Phys. 2021, 23, 2286–2297, DOI: 10.1039/D0CP06090A.DOI

Paper details

vlnc:W_nh9y2bbg
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents