In this paper, we investigate the effect of a fixed time delay on the internal stabilization of an Euler–Bernoulli beam clamped at one end with distributed damping. Under appropriate assumptions on the feedback weights, we first establish that the problem is well-posed using semigroup theory. Furthermore, using the multiplier method combined with a suitable Lyapunov functional, we prove the exponential stability of the system.
Introduction
This study aims to analyze the impact of a fixed internal time delay on the internal stabilization of a uniform Euler–Bernoulli beam, characterized by its mass per unit length m and flexural rigidity EI>0. The vibratory dynamics of the system are governed by the following initial-boundary value problem:
where y(x,t) represents the deflection of the beam at position x and time t, while uτ(x,t) denotes the internal control law, which depends on a fixed time delay τ>0. The boundary condition (1)2 means that the beam is clamped at its end x=0 and free at the opposite end x=ℓ. Finally, (y0,y1) is the initial state of the beam, and f0 indicates the memory of controller.
Key words and phrases. Euler–Bernoulli beam equation, time delay, distributed damping, exponential stability, multiplier method, Lyapunov functional.
The stabilization of Euler–Bernoulli beam equation is central to control theory, driven by both its engineering applications and its mathematical significance [2, 5, 9, 14, 25]. This challenge intensifies significantly when time delays are introduced, as even a small latency in the feedback loop can trigger instability [6, 7, 8, 12]. For this reason, designing robust control strategies to neutralize delay-induced instabilities remains a top priority in this field.
In this perspective, two main control strategies are widely distinguished in the literature for time-delay Euler–Bernoulli beam equations, depending on where the control action is applied. On the one hand, boundary control consists in applying feedback directly at the boundaries of the structure. In their pioneering work [13], Guo et al. considered an output feedback stabilization problem for the system:
where u is the control, (w0,w1) the initial state, and y the delayed measurement. The authors exponentially stabilize the system using the control law
u(t)={k2wt(1,t)=k2wt(1,t,t),0,t>τ,t∈[0,τ],
designed via an observer-predictor scheme based on the estimated state (w,wt) with k2>0. Subsequently, numerous contributions have deepened this direction, proposing various boundary control laws to effectively suppress the vibrations of such structures. A detailed review of these approaches and their recent developments can be found in [1, 3, 4, 15, 16, 19, 20, 21, 22, 23].
On the other hand, the control action can be distributed inside the spatial domain: this is referred to as internal (or distributed) control. The internal stabilization of Euler–Bernoulli beam models was pioneered by Feng et al. In [11], the state-feedback stabilization of the following system was addressed:
via a bounded, linear, and invertible integral operator-structured using appropriate kernel functions such as q(x,τ;y,r), γ(x,τ,r), and η(x,τ,y), which maps the original plant into an exponentially stable target system.
However, internal feedback mechanisms remain considerably less explored than their boundary counterparts. Yet, distributed controllers provide greater flexibility and allow for a more effective mitigation of localized physical phenomena [10], such as periodic disturbances, structural resonances, or spatial constraints. To achieve the exponential stabilization of system (1), we propose the following localized internal feedback control law:
inspired by the framework of Nicaise and Pignotti [17], where μ1>0, μ2=0, and a∈L∞(0,ℓ) is a function satisfying
{a(x)≥0a(x)>a0>0a.e. in (0,ℓ),a.e. in ω,(6)
with ω⊂(0,ℓ) being a non-empty open neighbourhood of ℓ. To the best of our knowledge, the internal stabilization of an Euler–Bernoulli beam under such a localized, delayed distributed feedback law remains entirely open in the literature. First, we reformulate system (1) by introducing a new state variable to handle the time delay. Then, under the dominance condition
∣μ2∣<μ1,(7)
we first prove that the problem is well-posed by invoking the semigroup theory [18]. Secondly, we establish the exponential decay of the system’s energy via a suitable Lyapunov functional coupled with the multiplier technique, departing from the observability-based approach of [17].
The rest of this paper is organized as follows. § 2 is devoted to preliminary reminders and tools necessary for establishing our main results. In § 3, we study the well-posedness of the problem (1) using semigroup theory. Finally, § 4 is entirely dedicated to proving the exponential stability of the system.
Preliminaries
This section gathers the essential tools for our main analysis. Throughout this paper, C denotes a generic constant.
Augmented system
To handle the time delay, we follow [17] and introduce the auxiliary variable z(x,ρ,t) defined as
z(x,s,t):=yt(x,t−sτ),x∈(0,ℓ),s∈(0,1),t>0.(8)
By direct computation, z satisfies the transport equation:
In addition, by Young’s inequality, it follows that
∣μ2z(x,1,t)yt∣≤2∣μ2∣(z(x,1,t)2+yt2).(23)
Substituting estimate (23) into (22) directly implies (13). The non-positivity of the right-hand side is guaranteed whenever ξ satisfies (12). □
Existence and uniqueness of solution
This section is devoted to the well-posedness of problem (1) via semigroup theory. Specifically, we recast the augmented system (10) into an abstract Cauchy problem and apply the Lumer–Phillips theorem.
Abstract formulation
2.1. Abstract formulation. Let He2(0,ℓ):={y∈H2(0,ℓ)∣y(0)=y′(0)=0}. We define the state space H as
for all Ui=(yi,vi,zi)∈H, i=1,2. It is straightforward to check that H is a Hilbert space. Next, on the space H, we define the linear operator A with domain D(A)⊂H given by
Proof. The verification that ∣⋅∣2 satisfies the norm axioms on He2(0,ℓ) is standard and omitted here. Next, we prove the equivalence property. Let w∈He2(0,ℓ). By definition, we immediately have ∣w∣2≤∥w∥H2(0,ℓ). Furthermore, using the triangle and Cauchy–Schwarz inequalities, we get
Theorem 1. Assume that conditions (7) and (12) holds. For any U0∈H, problem (10) admits a unique mild solution U∈C(R+,H). Moreover, if U0∈D(A), then U is a classical solution satisfying U∈C(R+,D(A))∩C1(R+,H).
Proof. First, we prove that the operator A is dissipative. Let U∈D(A). By definition of the inner product in H, we have
where the constant C is positive by virtue of condition (12) and is defined as
C:=min{−2∣μ2∣+2ξτ−1;μ1−2∣μ2∣−2ξτ−1}.
Next, to prove the maximality of A, it suffices to show that λI−A is surjective for a given λ>0. That is, for any Ψ=(f,g,h)T∈H, we seek a solution U=(y,v,z)T∈D(A) to the equation (λI−A)U=Ψ. Equivalently, this resolvent equation is expressed componentwise as:
This leads to the variational problem which consists in finding y∈He2(0,ℓ) such that
J(y,φ)=L(φ),(46)
for all φ∈H02(0,ℓ), where the functionals J and L are given by
J(y,φ)=EI∫0ℓy′′φ′′dx+λ∫0ℓGτ,1(λ,⋅)yφdx.(47)
L(φ)=∫0ℓ(mg+Gτ,1(λ,⋅)f+Gτh(λ,⋅))φdx.(48)
It is straightforward to verify that J and L are sesquilinear and antilinear, respectively. Furthermore, by applying the Cauchy–Schwarz inequality and taking into account condition (6), we obtain the following estimates:
This implies that EIy(4)+λGτ,1(λ,⋅)y=mg+Gτ,1(λ,⋅)f+Gτ,2(λ) almost everywhere on (0,ℓ). Consequently, y∈H4(0,ℓ) and satisfies (41)1 by virtue of the density of D(0,ℓ) in L2(0,ℓ).
Returning to φ∈He2(0,ℓ) and from the above, equation (57) leads to:
EIy′′(ℓ)φ′(ℓ)−EIy(3)(ℓ)φ(ℓ)=0.(59)
By the arbitrariness of φ, y fulfills the boundary condition (41)2, and therefore solves (41). Thus, the operator λI−A is surjective, which proves that A is maximal. Finally, the Lumer–Phillips theorem ensures that A generates a C0-semigroup of contractions on H, which guarantees the existence and uniqueness of solutions to the Cauchy problem (28). □
Exponential stability
This section is dedicated to the statement and proof of the exponential stability of system (1) based on Lyapunov method combined with multiplier techniques. To this end, we first establish several technical lemmas.
We begin by introducing the auxiliary functional Q(t), defined as
Q(t):=Q1(t)−Q2(t),t≥0,(60)
where the functionals Qi, i=1,2 are given by
Q1(t):=m∫0ℓyytdx(61)
Q2(t):=∫0ℓa(x)∫01syt2(x,t−τs)dsdx.(62)
Prior to estimating the time derivative of Q(t), we state and prove a few Poincaré-type inequalities.
Lemma 3. Let y∈He2(0,ℓ). Then, the following estimates hold:
∫0ℓy2(x)dx≤8ℓ4∥y′′∥L2(0,ℓ)2,(63)
∫0ℓa(x)y2(x)dx≤2ℓ3∫0ℓa(x)dx∥y′′∥L2(0,ℓ)2.(64)
Proof. We have for all x∈(0,ℓ):
y2(x)=(∫0xy′(r)dr)2≤x∫0xy′(r)2dr.(65)
In the same manner, taking into account y′(0)=0, we have
y′2(r)≤r∫0ry′′(σ)2dσ≤r∥y′′∥L2(0,ℓ)2.(66)
Consequently, integrating over (0,ℓ) and combining estimates (65) and (66), we deduce that
Finally, by applying the triangle inequality on the estimate (79) and by adding the energy E(t) to each side of the resulting inequality, we arrive at:
0<(1−δC)E(t)≤V(t)≤(1+δC)E(t),
by choosing δ∈(0,C−1). □
The main result of this paper states as follows:
Theorem 2. Suppose that assumptions (7) and (12) are satisfied. For any regular solution y of (1), there exist constants υ1,υ2>0 such that the energy E(t) satisfies
E(t)≤υ1E(0)e−υ2t,∀t≥0.(81)
Proof. In view of Lemmas 1 and 4, we obtain (13) and (67), together with condition (6)$_2$, the time derivative of V(t) satisfies
[1]M. Azzaoui, J. Salhi, and M. Segaoui, Mathematical and numerical analysis of the stability of coupled Euler–Bernoulli equations with indirect time-delayed damping. preprint, (2026). https://dx.doi.org/10.2139/ssrn.6899599
[2]A. V. Balakrishnan and L. Taylor, The SCOLE design challenge, Proceedings of the 3rd Annual NASA–SCOLE Workshop "NASA Tech. Memo.", volume 89075, Hampton 1987, 385–412.
[3]A. Camasta, G. Fragnelli, and C. Pignotti, Stability for some classes of degenerate nonlinear hyperbolic equations with time delay. Nonlinear Anal. Real World Appl., 81(2025), no. 104191. https://doi.org/10.1016/j.nonrwa.2024.104191
[4]L. Cao, S.–J. Li, and S. Chai, Stabilization of a degenerate beam on an elastic foundation with axial force under fractional derivative-type delayed boundary feedback. Electron. J. Differ. Equ., 2026(2026), no. 73, pp. 1–22. https://doi.org/10.5897/ejde.2026.73
[5]A. Chakravarthy, K. A. Evans, and J. E. Evers, Sensitivities & functional gains for a flexible aircraft-inspired model, Proceedings of the 2010 American Control Conference, 2010, 4893–4898. https://doi.org/10.1109/ACC.2010.5530914
[6]R. Datko, J. Lagnesе, and M. P. Polis, An example of the effect of time delays in boundary feedback stabilization of wave equations, Proceedings of the 1985 24th IEEE Conference on Decision and Control, 1985, 117–117. https://doi.org/10.1109/CDC.1985.268529
[7]R. Datko, Two questions concerning the boundary control of certain elastic systems. J. Differ. Equations, 921991, no. 1, pp. 27–44. https://doi.org/10.1016/0022-0396(91)90062-E
[8]R. Datko, Two examples of ill-posedness with respect to small time delays in stabilized elastic systems. IEEE Trans. Automat. Contr., 38(1993), no. 1, pp. 163–166. https://doi.org/10.1109/9.1863382
[9]Y. Du, P. Cheng, and F. Zhou, Free vibration analysis of axial-loaded beams with variable cross sections and multiple concentrated elements. J. Vib. Control, 28(2022), no. 17–18, pp. 2197–2211. https://doi.org/10.1177/10775463211012878
[10]C. R. Fanou, K. Ammari, and I. Boussada, Delay is necessary for a potential to achieve exponential stabilization of the wave equation via control. Preprint, (2026). https://arxiv.org/abs/2603.21777
[11]X. Feng, G. Xu, and Y. Chen, Rapid stabilisation of an Euler–Bernoulli beam with the internal delay control. Int. J. Control, 92(2019), no. 1, pp. 42–55. https://doi.org/10.1080/00207179.2017.1286693
[12]I. Gumowski and C. Mira, Optimization in Control Theory and Practice, Cambridge University Press, Cambridge, 1968.DOI
[13]B.–Z. Guo and K.–Y. Yang, Dynamic stabilization of an Euler–Bernoulli beam equation with time delay in boundary observation. Automatica, 45(2009), no. 6, pp. 1468–1475. https://doi.org/10.1016/j.automatica.2009.02.004
[14]W. He, S. Ge, B. How, and Y. S. Choo, Dynamics and Control of Mechanical Systems in Offshore Engineering, Springer London, London, 2014. https://doi.org/10.1007/978-1-4471-5337-5
[15]H. Hlachami and R. Shorten, Boundary input-to-state stabilization of a damped Euler–Bernoulli beam in the presence of a state-delay. Preprint, (2019). https://arxiv.org/abs/1912.01117
[16]N. Mahfoudhi and H. Ayadi, Well-posedness and global stabilization of an Euler–Bernoulli beam with distributed damping and nonlinear boundary delay. Acta Appl. Math., 203(2026), no. 4. https://doi.org/10.1007/s10440-026-00795-5
[17]S. Nicaise and C. Pignotti, Stability and instability results of the wave equation with a delay term in the boundary or internal feedbacks. J. Control Optim., 45(2006), no. 5, pp. 1561–1585. https://doi.org/10.1137/060648891
[18]A. Pazy, Semigroups of Linear Operators and Applications to Partial Differential Equations, Springer New York, New York, 1983. https://doi.org/10.1007/978-1-4612-5561-1
[19]A. J. Rahmtati, G.–Q. Xu, and S. Effati, Stability analysis of the Euler–Bernoulli beam with multi-delay controller. Control Theory Technol., 20(2022), pp. 338–348. https://doi.org/10.1007/s11768-022-00095-x
[20]J. Salhi, M. Azzaoui, and M. Tilioua, Stabilization of a degenerate Euler–Bernoulli beam model under boundary time-delayed damping. Rend. Circ. Mat. Palermo II. Ser., 75(2026), pp. 119. https://doi.org/10.1007/s12215-026-01444-4
[21]B. B. J. Siriki and A. Coulibaly, Boundary stabilization of a degenerate Euler–Bernoulli beam under axial force and time delay. Preprint, (2025). https://arxiv.org/abs/2512.18179
[22]B. B. J. Siriki and A. Coulibaly, Exponential stability of a degenerate Euler–Bernoulli beam with axial force and delayed boundary control. Preprint, (2026). https://arxiv.org/abs/2510.25484
[23]B. B. J. Siriki and A. Coulibaly, Boundary stabilization of an Euler–Bernoulli beam with axial force and internal delay. Preprint, (2026). https://arxiv.org/abs/2605.24315
[24]A. Smyshlyaev, B.-Z. Guo, and M. Krstic, Arbitrary decay rate for Euler–Bernoulli beam by backstepping boundary feedback. IEEE Trans. Autom. Control, 54(2009), no. 5, pp. 1134–1140. https://doi.org/10.1109/TAC.2009.2013038
[25]A. Wright, Modern Control Design for Flexible Wind Turbines, PhD thesis, University of Colorado, 2003. https://doi.org/10.2172/15011696