betaFeedback

WorksPhysics and Astronomy

Nonlinear spin and orbital Edelstein effect in WTe2

Abstract

In materials with spin-momentum locked spin textures, such as Rashba states and topological surface states, the current-induced shift of the Fermi contour in the k space leads to spin polarization, known as the Edelstein effect, which depends linearly on the applied current. However, its nonlinear counterpart has not yet been discovered. Here, we report the observation of the nonlinear Edelstein effect in few-layer WTe2. Under a current bias, an out-of-plane magnetization is induced in WTe2, which is electrically probed using an Fe3GeTe2 electrode, a van der Waals ferromagnet with perpendicular magnetic anisotropy. Notably, with an applied ac at frequency ω, an induced magnetization with second-harmonic response at frequency 2ω is observed, and its magnitude demonstrates a quadratic dependence on the applied current, characteristic of the nonlinear Edelstein effect. This phenomenon is well explained by the current-induced orbital magnetization via the Berry connection polarizability tensors in WTe2. The orbital degree of freedom plays the primary role in the observed nonlinear Edelstein effect, that is, the nonlinear orbital Edelstein effect. This can, in turn, give rise to a nonlinear spin Edelstein effect through spin-orbit coupling.

202 Nonlinear spin and orbital Edelstein effect in WTe2_2

202 Nonlinear spin and orbital Edelstein effect in WTe2.pdf

The efficient conversion of charge to spin is crucial for developing next-generation spintronic devices [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12]. This conversion is particularly notable in materials exhibiting spin-momentum locked spin textures, such as those with Rashba spin-orbit coupling (SOC) or topological surface states. In Rashba systems, the breaking of inversion symmetry leads to the splitting of spin bands into inner and outer Fermi circles with opposite spin helicities [5]. Applying a current induces an imbalance in the density of spin-up and spin-down electrons, resulting in net spin polarization. Similarly, topological insulators and topological semimetals, with their unique topological surface states, also exhibit efficient charge-to-spin conversion due to their intrinsic spin-momentum locking [6, 7, 8]. This phenomenon, generally known as the Edelstein effect, typically exhibits a linear relationship between the induced spin polarization and the applied current. The linear Edelstein effect has been used to generate spin torques to drive the magnetization switching of ferromagnetic materials, significantly impacting the development of magnetic random-access memory [11].

Despite extensive research on the Edelstein effect, the exploration of its nonlinear counterpart has remained elusive until now. A nonlinear Edelstein effect, where the induced spin polarization depends quadratically on the applied current, would have profound implications. In this study, we present an experimental observation of the nonlinear Edelstein effect in few-layer WTe2_2. When subjected to an ac bias, WTe2_2 exhibits an out-of-plane magnetization that displays a second-harmonic response at twice the frequency of the driving current, with a magnitude that scales quadratically with the current—a hallmark of the nonlinear Edelstein effect. This phenomenon is elucidated through the current-induced orbital magnetization due to the Berry connection polarizability (BCP) tensors in WTe2_2.

Orbital magnetization and nonlinear Edelstein effect induced by BCP tensors. Recently, orbital magnetization [13, 14, 15, 16, 17], orbital torques [18, 19, 20], orbital Hall effect [21, 22, 23, 24, 25], and the kinetic magnetoelectric effect [26, 27, 28, 29, 30, 31, 32, 33], which are related to the orbital magnetic moment, have garnered significant research interest. Within the framework of semiclassical Boltzmann transport equation along with constant relaxation time approximation, the current-induced orbital magnetization is given by Mi=εταijMEEjM_i=\varepsilon\tau\alpha_{ij}^{\mathrm{ME}}E_j, where ii and jj label the spatial directions, EE is the electric field, τ\tau is the scattering time, and αijME\alpha_{ij}^{\mathrm{ME}} is the kinetic magnetoelectric (ME) susceptibility. The αijME=∫kdfdεmkmk,ivk,j\alpha_{ij}^{\mathrm{ME}}=\int_k \frac{df}{d\varepsilon_{mk}}m_{k,i}v_{k,j} can be notable for an asymmetric orbital texture, where dfdε∝δ(ε−εF)\frac{df}{d\varepsilon}\propto\delta(\varepsilon-\varepsilon_F) is approximately valid at low temperatures T≪TFT\ll T_F (TFT_F is the Fermi temperature), mk,im_{k,i} is the iith component of orbital magnetic moment mkm_k, vk=∂ε∂kv_k=\frac{\partial\varepsilon}{\partial k} is the electron velocity, and the integral is over the Brillouin zone with summation over the band index [34]. Moreover, the nonlinear magnetoelectric coupling can also lead to current-induced magnetization [35].

In WTe2_2 with the Td phase, the orbital magnetization can be generated by applying current. Td-phase WTe2_2 is classified as a type-II Weyl semimetal, showcasing Fermi arc surface states [36]. Remarkably, at the monolayer level, WTe2_2 exhibits the quantum spin Hall effect [37] and superconductivity [38, 39]. The crystal structure of WTe2_2 belongs to the space group Pmn21Pmn2_1, with mirror symmetry Ma\mathcal{M}_a and glide mirror symmetry M~b\widetilde{\mathcal{M}}_b [40]. These two mirror symmetries with perpendicular mirror planes together generate a twofold rotational symmetry C2zC_{2z} in the abab plane through a half-cell translation. By applying a current to break this C2zC_{2z} symmetry, the nonlinear Edelstein effect can be induced through the mechanism of BCP tensors, defined as Gij=2eRe⁡∑m≠n(Ai)nm(Aj)mnεn−εmG_{ij} = 2e\operatorname{Re}\sum_{m\ne n}\frac{(A_i)_{nm}(A_j)_{mn}}{\varepsilon_n-\varepsilon_m}, where (Ai)nm=⟨n∣i∂∂ki∣m⟩(A_i)_{nm} = \langle n|i\frac{\partial}{\partial k_i}|m\rangle is the interband Berry connection and ∣n⟩|n\rangle is the cell-periodic part of the Bloch eigenstate with eigenenergy εn\varepsilon_n [41, 42, 43, 44]. The BCP tensors are gauge-invariant band geometric quantities associated with the electric-field induced positional shift of Bloch electrons [43]. The BCP is regarded as the intrinsic origin of the third-order nonlinear Hall effect [44]. Upon applying an electric field, the BCP tensor can lead to Berry connection linearly proportional to the applied current, denoted as A(1)=G↔EA^{(1)} = \overleftrightarrow{G}E. Here, G↔\overleftrightarrow{G} is the BCP tensor, EE is the applied electric field, and the superscript “(1)” indicates the first-order term of the electric field. Note that the orbital magnetic moment mkm_k involves the matrix elements −e2⟨ψi∣r×v∣ψi⟩-\frac{e}{2}\langle\psi_i|\mathbf{r}\times\mathbf{v}|\psi_i\rangle, with r\mathbf{r} as the position operator, v=−iℏ[r,H]\mathbf{v}=-\frac{i}{\hbar}[\mathbf{r},H] as the velocity operator, HH as the Hamiltonian, and ∣ψi⟩|\psi_i\rangle as the eigenstate [45]. In the Bloch representation, the position operator is formulated as r=i∂∂k+A(k)\mathbf{r}=i\frac{\partial}{\partial\mathbf{k}}+\mathbf{A}(\mathbf{k}) [46]. Therefore, the BCP tensors can give rise to a field-correction term of mkm_k through the field-induced Berry connection A(1)=G↔EA^{(1)}=\overleftrightarrow{G}E, that is, mk(1)=−e2⟨n∣(G↔E)×v∣n⟩m_k^{(1)}=-\frac{e}{2}\langle n|(\overleftrightarrow{G}E)\times\mathbf{v}|n\rangle, which is linearly proportional to EE.

Figures 1(a) and 1(b) illustrate the electric-field induced orbital magnetic moments in the Td monolayer WTe2_2 by applying an electric field along the bb axis and aa axis, respectively, exhibiting antisymmetric distributions in momentum space, where mc(1)(kb,ka)=−mc(1)(kb,−ka)m_c^{(1)}(k_b,k_a)=-m_c^{(1)}(k_b,-k_a) for E=Ebb^E=E_b\hat{\mathbf{b}}, and mc(1)(kb,ka)=−mc(1)(−kb,ka)m_c^{(1)}(k_b,k_a)=-m_c^{(1)}(-k_b,k_a) for E=Eaa^E=E_a\hat{\mathbf{a}}. This dipolelike distribution forms an exotic orbital texture with orbit-momentum locking [23, 32], giving rise to the kinetic magnetoelectric coefficient αcj(1)\alpha_{cj}^{(1)}, where an in-plane electric field is able to generate out-of-plane orbital magnetization (McM_c). Figure 1(c) illustrates the αca(1)\alpha_{ca}^{(1)} as applying an electric field EE along the bb axis in WTe2_2 (see Supplementary Material, Figs. S1 and S2 [47] for model calculations), giving αcj(1)∝E\alpha_{cj}^{(1)}\propto E. Utilizing this orbital texture, the electric field additionally triggers orbital magnetization, denoted as Mc=eταcj(1)Ej∝E2M_c=e\tau\alpha_{cj}^{(1)}E_j\propto E^2 [55], constituting a nonlinear Edelstein effect. While the nonlinear orbital Edelstein effect analysis provided relies on the Boltzmann equation method, a more comprehensive theoretical framework, starting from nonlinear transport theory [56], remains desirable. Furthermore, it is noteworthy that with the presence of SOC, the orbital magnetization gives rise to spin polarization, leading to the emergence of nonlinear spin Edelstein effect. However, it is important to note that the orbital degree of freedom is more fundamental here, as the nonlinear orbital dynamics are independent of the strength of SOC, whereas the nonlinear spin Edelstein effect only appears when SOC is activated [55].

Figure 1. (a), (b) Illustration of asymmetric distribution of orbital magnetic moment in the conductance band when applying an electric field along (a) bb axis or (b) aa axis in Td monolayer WTe2_2, respectively. (c) The coefficient αca(1)\alpha_{ca}^{(1)} as a function of the in-plane electric field EbE_b at chemical potential 0.1 eV. (d) Illustration of nonlinear Edelstein effect in WTe2_2. The applied current induces an orbital texture, further leading to orbital magnetization, which exhibits a quadratic dependence on the current.

The nonlinear Edelstein effect is characterized by Mi=χijkEjEkM_i = \chi_{ijk}E_jE_k (ii, jj, k=ak = a, bb, cc in WTe2_2, with the cc axis as the out-of-plane orientation) [48]. Here, we only consider the tensor component χcij\chi_{cij}, specifically for ii, j=aj = a, bb, representing the in-plane field-induced out-of-plane magnetization. The χcij\chi_{cij} is intricately linked to the BCP tensors, allowed by inversion symmetry (refer to the symmetry constraints detailed in Supplementary Material, Table S1 [47]). Since WTe2_2 bulk holds both Ma\mathcal{M}_a and M~b\widetilde{\mathcal{M}}_b mirror symmetries [44], the two mirrors enforce χcaa=χcbb=0\chi_{caa} = \chi_{cbb} = 0, and only the components χcab\chi_{cab} and χcba\chi_{cba} are permissible. Therefore, applying an electric field EaE_a or EbE_b along the crystalline axis cannot induce out-of-plane magnetization [44, 48]. However, deviating the EE from the crystalline aa- or bb axis allows the generation of out-of-plane magnetization McM_c due to the nonzero χcab\chi_{cab} and χcba\chi_{cba}.

γ,C2c\gamma, C_2^cC3,4,6cC_{3,4,6}^cC2,4,6aC_{2,4,6}^aC3aC_3^aMc\mathcal{M}_cMa,Mb\mathcal{M}_a,\mathcal{M}_b
χcaa\chi_{caa}✔✔🚫🚫✔🚫
χcbb\chi_{cbb}✔✔🚫✔✔🚫
χcab\chi_{cab}✔🚫✔✔✔✔

Table S1. TABLE S1. The symmetry constraints of the nonlinear magnetoelectric coefficient χijk\chi_{ijk} under time-reversal symmetry. Here γ\gamma is the inversion symmetry, CniC_n^i is the nn-fold rotation symmetry with rotation axis along ii direction. Mi\mathcal{M}_i is the mirror symmetry with the mirror line along ii direction. Allowed: ✔; Forbidden: 🚫.

In experiments, the out-of-plane magnetization in WTe2_2 bulk is generated by applying a charge current II [Fig. 1(d)], effectively generating an electric field denoted as E=RI/LE = RI/L, where RR represents the longitudinal resistance (16∼56 Ω16 \sim56\,\Omega in our device), and LL is the channel length (∼8\sim8 μ\mum in our device). The current-induced magnetization is expressed as Mc=eταcj(1)Ej∝I2M_c = e\tau\alpha_{cj}^{(1)}E_j \propto I^2, which remains unchanged as reversing the direction of current.

Current-induced out-of-plane magnetization in WTe2_2

To directly measure the current-induced out-of-plane magnetization in WTe2_2, we employ a few-layer Fe3_3GeTe2_2 (FGT) as a ferromagnetic (FM) probe. Results from two devices, namely devices S1 and S2, are presented, with the focus on device S1 in the main text. The optical image of device S1 is depicted in Figure 2(a). A layer of h-BN thin film was interposed between WTe2_2 and FGT to prevent magnetic proximity effect from FGT.

Image not extracted

Figure 2. (a) Optical image of a device. (b) Schematic of circular disc electrodes. The angle φ\varphi is defined as the angle between the aa axis of WTe2_2 and the direction of applied current. (c) The Hall resistance of FGT, showing hysteresis with magnetic field. (d) Schematic of magnetization detection in WTe2_2 via FGT probe. (e) Magnetization-related second-harmonic voltage Vm2ωV_{\mathrm{m}}^{2\omega} at φ=20∘\varphi= 20^\circ and Eω=1E^\omega= 1 kV/m. (f) Using two Au electrodes for the voltage measurement at φ=20∘\varphi= 20^\circ and Eω=1E^\omega= 1 kV/m, no hysteresis loop is observed. All data were acquired at 5 K.

FGT. Disc electrodes were fabricated to apply current along various directions, as illustrated in Figure 2(b), where the angle φ\varphi represents the relative angle between the applied current and a pair of electrodes (along the crystalline aa axis with a small misalignment of ∼6∘\sim6^\circ). The perpendicular magnetism anisotropy of FGT is confirmed by a square-shaped hysteresis loop in the anomalous Hall resistance, as shown in Figure 2(c) (also refer to Figure S5 in the Supplementary Material [47]).

Figure S5. The hysteresis curve of the Hall resistance of FGT as sweeping in-plane (black) and out-of-plane (red) magnetic field.

The experimental setup for measuring the current-induced magnetization in WTe2_2 is illustrated in Figure 2(d). In these measurements, a fixed ac IωI^\omega with a frequency ω\omega is applied to generate magnetization through the nonlinear Edelstein effect. Given that Mc∝I2M_c \propto I^2, a second-harmonic out-of-plane magnetization M2ωM^{2\omega} with a frequency of 2ω2\omega is anticipated. The magnetization in WTe2_2 is then probed using the FGT probe. When McM_c is antiparallel or parallel to the magnetization of FGT (MFGTM_{\mathrm{FGT}}), a high- or low-voltage state will be detected, respectively (see Supplementary Note 3 for detailed mechanisms [47]). By varying MFGTM_{\mathrm{FGT}} through sweeping an external magnetic field and simultaneously measuring the voltage V2ωV^{2\omega} using the FGT probe with respect to a reference Au electrode via the lock-in method, the current-induced McM_c in WTe2_2 can be directly obtained (see Figure S6 [47] for the detailed measurement configuration). The magnetization-dependent voltage is determined by subtracting the background from V2ωV^{2\omega}, denoted as Vm2ωV_{\mathrm{m}}^{2\omega} (refer to Figure S7 [47]).

Figure S6. (a) Measurement scheme for the nonlinear orbital Edelstein effect. (b) The illustration of measurement configuration corresponding to (a). The red numbers denote the electrodes depicted in (a).

Figure S7. The measured second-harmonic voltage (V2ωV^{2\omega}) via the FGT probe under varying excitation current at fixed direction (φ=20∘\varphi=20^\circ).

The measured Vm2ωV_{\mathrm{m}}^{2\omega} with a current applied at an angle deviated from the aa axis (φ=20∘\varphi= 20^\circ) is presented in Figure 2(e). Hysteresis behavior is evident in Vm2ωV_{\mathrm{m}}^{2\omega} during both forward and backward sweeping magnetic fields. The high- and low states of Vm2ωV_{\mathrm{m}}^{2\omega} correspond to the current-induced M2ωM^{2\omega} in WTe2_2 being antiparallel and parallel to MFGTM_{\mathrm{FGT}}, respectively. A difference in Vm2ωV^{2\omega}_{m} between up- and down sweeping magnetic fields above +0.3+0.3 T is noted, attributed to the cumulative nature of thermal effects over time under the applied ac field Eω=1E^\omega= 1 kV/m (∼0.5\sim0.5-mA current). No hysteresis loop is observed for the voltage probe employing two nonmagnetic electrodes with the FGT electrode between them [Fig. 2(f)]. This observation unequivocally dismisses the possibility of the Vm2ωV^{2\omega}_{m} originating from the proximity-induced magnetism in WTe2_2 by the FGT electrode.

The Vm2ωV^{2\omega}_{m} at φ=20∘\varphi= 20^\circ is further investigated by varying the intensity of excitation current, as shown in Figure 3(a). It is found that the loop height increases with excitation current, and its polarity remains unchanged upon reversing the excitation current (by exchanging the source-drain leads). The loop height ΔVm2ω\Delta V^{2\omega}_{m}, defined as the voltage difference at zero magnetic field when forward- and backward sweeping magnetic field, exhibits a quadratic dependence on the excitation current [Fig. 3(b)]. Because ΔVm2ω∝MWTe2\Delta V^{2\omega}_{m} \propto M_{\mathrm{WTe_2}}, the observations suggest a quadratic relationship between the induced out-of-plane magnetization in WTe2_2 and the excitation current, aligning with the anticipated behavior of the nonlinear Edelstein effect.

Figure 3. (a) Vm2ωV^{2\omega}_{m} under various EωE^\omega at φ=20∘\varphi= 20^\circ. (b) The height of Vm2ωV^{2\omega}_{m} hysteresis curve, ΔVm2ω\Delta V^{2\omega}_{m}, as a function of EωE^\omega at φ=20∘\varphi= 20^\circ. The red line is a fit with the formula of ΔVm2ω=λ(Eω)2\Delta V^{2\omega}_{m} = \lambda(E^\omega)^2. (c) Vm2ωV^{2\omega}_{m} at Eω=1E^\omega= 1 kV/m with φ=90∘\varphi= 90^\circ (approximately along the bb axis). All data were acquired at 5 K.

The Vm2ωV^{2\omega}_{m} is further investigated when applying current IωI^\omega at φ=90∘\varphi= 90^\circ (approximately along the bb axis). As depicted in Figure 3(c), suppressed hysteresis is observed as sweeping magnetic field. Due to the bcbc mirror plane imposing χcbb=0\chi_{cbb} = 0 in WTe2_2, inducing out-of-plane magnetization with IωI^\omega along the bb axis is not feasible. The slight, nonvanishing hysteresis in Figure 3(c) is attributed to a misalignment of ∼6∘\sim6^\circ between IωI^\omega and the bb axis. Consistent results were obtained with excitation currents along different directions (refer to Figure S8 [47]) and under various measurement configurations (see Figure S9 [47]). Furthermore, reproducible results were confirmed in device S2 (refer to Figure S10 and Figure S11 in Supplemental Material [47]).

Current-induced second-harmonic out-of-plane magnetization for $\varphi=70^\circ$ and $E^{\omega}=1$ kV/m

(a)

Current-induced second-harmonic out-of-plane magnetization for $\varphi=70^\circ$ and $E^{\omega}=-1$ kV/m

(b)

Dependence of $\Delta V_{\mathrm{m}}^{2\omega}$ on $E^{\omega}$ for $\varphi=70^\circ$

(c)

Current-induced second-harmonic out-of-plane magnetization for $\varphi=-20^\circ$ and $E^{\omega}=1$ kV/m

(d)

Current-induced second-harmonic out-of-plane magnetization for $\varphi=-20^\circ$ and $E^{\omega}=-1$ kV/m

(e)

Dependence of $\Delta V_{\mathrm{m}}^{2\omega}$ on $E^{\omega}$ for $\varphi=-20^\circ$

(f)

Figure S8. Current induced second-harmonic out-of-plane magnetization of WTe2\mathrm{WTe}_2 at 5 K.

Image not extracted

Figure S9. Second-harmonic magnetization-dependent voltage Vm2ωV_m^{2\omega} under different reference Au electrodes.

a-c, The voltage measurement configurations with the fixed FGT probe and different reference Au electrodes.

d-f, The measured Vm2ωV_m^{2\omega} under corresponding measurement configurations in a-c, respectively.

Image not extracted

Figure S10. The measured second-harmonic voltage (V2ωV^{2\omega}) via the FGT probe under Eω=1 kV/mE^\omega=1\ \mathrm{kV/m} at (a) φ=30∘\varphi=30^\circ and (b) φ=210∘\varphi=210^\circ in device S2 at 5 K.

Image not extracted

Figure S11. Anisotropic transport in device S2. a-d, (a) Longitudinal resistance RxxR_{xx}, (b) third-order nonlinear Hall effect EH3ω(Eω)3\frac{E_{\mathrm{H}}^{3\omega}}{(E^\omega)^3}, (c) second-harmonic magnetization signal ΔVm2ω\Delta V_m^{2\omega}, and (d) first-harmonic magnetization signal ΔVmω\Delta V_m^\omega as a function of angle φ\varphi at 5 K.

The temperature dependence of current-induced magnetization is further investigated. As depicted in Figure 4, the Vm2ωV^{2\omega}_{m} diminishes with increasing temperature, and the hysteresis loop becomes barely discernible above 50 K. Concurrently, the third-order nonlinear Hall effect of WTe2_2 was measured at various temperatures. Remarkably, when plotting ΔVm2ω\Delta V^{2\omega}_{m} against EH3ω(Eω)3\frac{E^{3\omega}_{H}}{(E^\omega)^3}, a clear linear dependence emerges, as illustrated in Figure 4(c). Here, EH3ω=VH3ωWE^{3\omega}_{H} = \frac{V^{3\omega}_{H}}{W}, Eω=IωRxxLE^\omega= \frac{I^\omega R_{xx}}{L}, VH3ωV^{3\omega}_{H} is the third-harmonic Hall voltage, and WW and LL are the channel width and length, respectively. Note that the quantity EH3ω(Eω)3\frac{E^{3\omega}_{H}}{(E^\omega)^3} is directly related to the BCP tensors in WTe2_2 [44]. The BCP tensors contribute to the EH3ω(Eω)3\frac{E^{3\omega}_{H}}{(E^\omega)^3} by χabcd1b=2∫kf∂a∂bGcd−∫kf∂c∂dGab−12∫kd2fdε2vavbGcd\chi^{1b}_{abcd} = 2\int_k f \partial_a\partial_b G_{cd} - \int_k f \partial_c\partial_d G_{ab} - \frac{1}{2}\int_k \frac{d^2 f}{d\varepsilon^2}v_a v_b G_{cd}, where GijG_{ij} is the BCP tensors and χacd1b\chi^{1b}_{acd} is the (intrinsically) τ\tau-independent part of EH3ω(Eω)3\frac{E^{3\omega}_{H}}{(E^\omega)^3} [42]. Therefore, the observed linear correlation between ΔVm2ω\Delta V^{2\omega}_{m} and EH3ω(Eω)3\frac{E^{3\omega}_{H}}{(E^\omega)^3} indicates that the current-induced nonlinear magnetization in WTe2_2 also possesses an intrinsic origin from the BCP tensors.

Figure 4. (a) Second-harmonic Vm2ωV^{2\omega}_{m} under Eω=1E^\omega= 1 kV/m along φ=−20∘\varphi= -20^\circ at different temperatures as indicated. (b) Temperature dependence of the hysteresis height ΔVm2ω\Delta V^{2\omega}_{m}. (c) The ΔVm2ω\Delta V^{2\omega}_{m} at fixed Eω=1E^\omega= 1 kV/m as a function of the third-order nonlinear Hall signal EH3ω(Eω)3\frac{E^{3\omega}_{H}}{(E^\omega)^3} along φ=−20∘\varphi= -20^\circ. The data were collected across a temperature range of 8 to 50 K.

Discussion and conclusions

The magnetization-dependent second-harmonic voltage signals ΔVm2ω\Delta V^{2\omega}_{m} distinctly indicate the nonlinear out-of-plane magnetization induced by in-plane current, that is, the nonlinear Edelstein effect. We also examine other mechanisms contributing to this nonlinear magnetization (details in Supplemental Note 7), and it has been determined that the nonlinear spin- (orbital) Hall effect and spin Seebeck effect are not responsible for the observed phenomena.

Recent reports indicate that in-plane and out-of-plane magnetization with ΔVm≈200\Delta V_m \approx200 and 30 μ\muV, respectively, can be induced by the linear Edelstein effect with an applied current of 1 mA along the aa axis in WTe2_2, where the outof-plane magnetization is allowed by the surface symmetry breaking [51, 52, 53, 54, 57]. Despite its relatively weaker magnitude observed in this work, the current-induced magnetization from the nonlinear Edelstein effect demonstrates a quadratic relationship with the current, ensuring its direction remains unchanged upon the reversal of the current. Furthermore, the lower-symmetry requirements of the nonlinear Edelstein effect render it more applicable across a broader range of crystalline materials. These characteristics endow the nonlinear Edelstein effect with unique potential applications in charge-to-magnetization conversion.

In summary, our results reveal the emergence of nonlinear Edelstein effect in few-layer WTe2W\mathrm{Te}_2. The application of a current induces an exotic orbital texture through the positional shift of Bloch electrons, further leading to the generation of magnetization. The induced magnetization

demonstrates a quadratic dependence on the applied current, directly observed using a ferromagnetic FGT probe with second-harmonic voltage measurements. This finding represents a significant advancement in understanding the nonlinear charge-to-spin conversion mechanisms, particularly highlighting the role of current-induced orbital magnetization facilitated by BCP tensors. Considering the widespread existence of BCP in diverse materials, regardless of SOC [34, 42, 43, 44], the nonlinear Edelstein effect holds significant promise in a broad range of materials with weak SOC for the electric control of magnetization.

Acknowledgments. This work was supported by the National Natural Science Foundation of China (Grants No. 62425401 and No. 62321004), and Innovation Program for Quantum Science and Technology (Grant No. 2021ZD0302403).

SM

Method

Device fabrications. The high-quality bulk WTe2_2 crystals were obtained from HQ Graphene. Few-layer WTe2_2 flakes were obtained by a mechanical exfoliation method, where the WTe2_2 crystal was repeatedly exfoliated with scotch tape, transferred onto polydimethylsiloxane (PDMS), and then covered onto a precleaned Si substrate with 285 nm-thick SiO2_2. The PDMS was heated for about 1 minute at 90°C to transfer the few-layer WTe2_2 onto the Si substrate. Ti/Au electrodes (around 10 nm thick) were patterned onto the SiO2_2/Si substrate using e-beam lithography, metal deposition, and lift-off. The exfoliated h-BN, Fe3GeTe2Fe_3GeTe_2 (FGT), and few-layer WTe2_2 were sequentially picked up and transferred onto the Ti/Au electrodes using a polymer-based dry transfer technique.

In the fabrication of the device, ~7-nm-thick WTe2_2 flake was chosen and was stacked with monolayer or bilayer h-BN and 10-nm-thick FGT strip, where the h-BN served as the spacer to prevent the magnetic proximity effect between the FGT and WTe2_2. A 20-30 nm thick h-BN layer was placed on top for coverage. The entire exfoliation and transfer process were performed in an argon-filled glove box with an O2_2 and H2_2O content below 0.01 parts per million to prevent sample degradation.

Berry connection polarizability in Td monolayer WTe2_2

The Berry connection polarizability (BCP) tensor is a band geometric quantity that is related to the field-induced positional shift of Bloch electrons, given by Gμν(n,k)=2eRe⁡∑m≠n(Aμ)nm(Aν)mnεn−εmG_{\mu\nu}(n,\mathbf{k}) = 2e\operatorname{Re}\sum_{m\ne n}\frac{(A_{\mu})_{nm}(A_{\nu})_{mn}}{\varepsilon_n-\varepsilon_m}, where AmnA_{mn} is the interband Berry connection and ee is the electron charge [42]. The BCP tensor can generate Berry connection through an external electric field following A(1)=G⃗E\mathbf{A}^{(1)}=\vec{\mathbf{G}}\mathbf{E}, where G⃗\vec{\mathbf{G}} is the BCP tensor, E\mathbf{E} is the external electric field, and the superscript “(1)” represents that the physical quantity is the first order term of electric field.

The BCP tensors are calculated in monolayer Td WTe2_2 using the effective k⋅p\mathbf{k}\cdot\mathbf{p} Hamiltonian

H=(εcv+0−v−εv00−v+εv)\mathcal{H}= \begin{pmatrix} \varepsilon_c & v^{+} & 0\\ -v^{-} & \varepsilon_v & 0\\ 0 & -v^{+} & \varepsilon_v \end{pmatrix}

where εc=ε1\varepsilon_c=\varepsilon_1, εv=11+rε2−r1+rε3\varepsilon_v=\frac{1}{1+r}\varepsilon_2-\frac{r}{1+r}\varepsilon_3, v±=11+r(±v1,xkx+iv1,yky)v^{\pm}=\sqrt{\frac{1}{1+r}}(\pm v_{1,x}k_x+i v_{1,y}k_y), and εi=ci,0+ci,xkx2+ci,yky2\varepsilon_i=c_{i,0}+c_{i,x}k_x^2+c_{i,y}k_y^2 (i=1,2,3i=1,2,3). All the parameters used are the same as in Ref. [32]. The calculated BCP tensors are shown in Figure S1. Giant BCP tensors are found near band edge. Importantly, even when the spin-orbit coupling is absent, the BCP tensors are still significant in WTe2_2.

Image not extracted

Figure S1. (a) Energy band of the monolayer WTe2_2, where the spin-orbit coupling is turned off, leading to spin-degenerate bands. (b)–(d) Distribution of the BCP component (b) GaaG_{aa}, (c) GbbG_{bb}, and (d) GabG_{ab} in momentum space.

It is worth noting that the monolayer model is a simplified approach to understanding the electronic properties of the few-layer WTe2_2. Nevertheless, this model captures the main features of the BCP tensors when compared with the results from first-principles calculations of the bulk system (ref. 44). These main features are crucial for understanding the nonlinear magnetization signals observed in our experiments.

However, the monolayer model cannot capture the detailed stacking interactions and variations in electronic properties that arise in the few-layer and bulk systems. First-principles calculations of the bulk system, as shown in ref. 44, reveal more detailed features that the monolayer model cannot account for.

The field-induced orbital magnetic moment in monolayer Td WTe2_2 is calculated by a Kubo-like formula,

mk(1)=−e2ℏ⟨n∣(G⃗⃗E)×∇kH∣n⟩,\mathbf{m}_{\mathbf{k}}^{(1)}=-\frac{e}{2\hbar}\langle n|(\vec{\vec{G}}\mathbf{E})\times\nabla_{\mathbf{k}}H|n\rangle,

where the nn-th band BCP tensors G⃗⃗\vec{\vec{G}} are calculated as

Gij=2eRe⁡∑m≠n⟨n∣∂H∂ki∣m⟩⟨m∣∂H∂kj∣n⟩(εn−εm)3,G_{ij}=2e\operatorname{Re}\sum_{m\ne n}\frac{\left\langle n\left|\frac{\partial H}{\partial k_i}\right|m\right\rangle\left\langle m\left|\frac{\partial H}{\partial k_j}\right|n\right\rangle}{(\varepsilon_n-\varepsilon_m)^3},

as shown in Fig. 1 of main text.

To demonstrate this field-induced orbital magnetic moment, calculations are also implemented in a two-dimensional (2D) gapped Dirac model with the Hamiltonian

H(k)=ξkaσ0+vakaσa+vbkbσb+Δσc,H(\mathbf{k}) = \xi k_a \sigma_0 + v_a k_a \sigma_a + v_b k_b \sigma_b + \Delta\sigma_c,

where σ0\sigma_0 is the 2 × 2 identity matrix, σa,b,c\sigma_{a,b,c} is Pauli matrices, ξ\xi describes the tilting of Dirac cone, vav_a and vbv_b describe the anisotropy of Fermi velocity, 2Δ2\Delta is the energy gap [42]. The energy band of the 2D gapped Dirac model is shown in Figure S2. The BCP tensors are evaluated, as shown in Figure S2-(Figure S2). It is found that the BCP tensors show maximum value near the band edge. Under the application of an external electric field, orbital magnetic moment can be generated by the BCP tensors. The field-induced orbital magnetic moment shows a dipole-like distribution in momentum space, leading to nonzero kinetic magnetoelectric coefficient αcj(1)\alpha_{cj}^{(1)}, as shown in Figure S2-(Figure S2).

The 2D gapped Dirac model

Figure S2. The 2D gapped Dirac model. a, Energy band of the gapped Dirac model. b-d, Distribution of the BCP component (b) GaaG_{aa}, (c) GbbG_{bb}, and (d) GabG_{ab} in momentum space. e,f, Field induced orbital magnetic moment under an external electric field applying along the (e) bb axis and (f) aa axis.

Nonlinear orbital Edelstein effect

The orbital magnetic moment arises from the self-rotation of Bloch electrons around their center of mass [22, 23]. An unusual orbital texture characterized by orbit magnetic moment-momentum locking can result in a nonzero magnetoelectric coefficient αcjME=∫kdfdεmk,cvk,j\alpha_{cj}^{ME} = \int_{\mathbf{k}} \frac{df}{d\varepsilon}m_{\mathbf{k},c}v_{\mathbf{k},j}, and the out-of-plane orbital magnetization is given by Mc=eταcjMEEjM_c = e\tau\alpha_{cj}^{ME}E_j [34], known as the out-of-plane orbital Edelstein effect. However, in materials with inversion symmetry, the αcjME\alpha_{cj}^{ME} is forced to be zero, leading to this out-of-plane orbital Edelstein effect vanishing [27]. Alternatively, the αcjME\alpha_{cj}^{ME} can be induced by applying an electric field through the mechanism of BCP tensors, where the restriction of inversion symmetry is removed.

As depicted in the upper panel of Figure S3, the applied current generates an antisymmetric orbital texture with a nonzero αcj(1)∝I\alpha_{cj}^{(1)} \propto I due to the field-correction of Berry connection induced by BCP tensors. The applied current further induces orbital magnetization, as illustrated in the lower panel of Figure S3, through the Fermi contour shift. Therefore, the current induces orbital magnetization with Mc=eταcj(1)Ej∝I2M_c = e\tau\alpha_{cj}^{(1)}E_j \propto I^2, representing the nonlinear orbital Edelstein effect.

Figure S3. Illustration of BCP-induced nonlinear magnetoelectric effect. Upper panel: The current-generated orbital texture in WTe2W\mathrm{Te}_{2} with αcjME∝I\alpha_{cj}^{ME} \propto I. Lower panel: Illustration of the current-induced orbital magnetization with nonequilibrium electron distribution.

The out-of-plane nonlinear orbital Edelstein effect relies on the mechanism of BCP tensors. Given the widespread presence of BCP tensors across various materials, the nonlinear orbital Edelstein effect is anticipated to manifest in a diverse range of substances. Unlike the linear orbital Edelstein effect exclusive to gyrotropic crystals [27], the nonlinear counterpart exhibits a more lenient symmetry constraint [48]. To provide a generalized framework for the nonlinear orbital Edelstein effect in diverse materials, we summarize the symmetry constraints. Specifically, we consider the time-reversal-even nonlinear magnetoelectric coefficient χijk\chi_{ijk} in nonmagnetic materials, focusing on in-plane electric field-induced out-of-plane magnetization. Assuming the EE is applied in the abab plane (j,k=a,bj,k=a,b) and the induced magnetization is along the out-of-plane cc axis (i=ci=c), the obtained symmetry constraints are presented in Table S1.

Notably, Table S1 reveals that the nonlinear magnetoelectric coefficient χcab\chi_{cab} is permissible in WTe2W\mathrm{Te}_{2} bulk, precisely aligning with the results obtained in this work.

In this work, we choose few-layer WTe2\mathrm{WTe}_2 to demonstrate the nonlinear orbital Edelstein effect based on the following considerations:

  1. WTe2\mathrm{WTe}_2 exhibits metallic behavior, which facilitates an efficient Fermi contour shift driven by electric current. This shift is crucial for the nonlinear orbital Edelstein effect, representing a kinetic magnetoelectric effect.

  1. The bulk of WTe2\mathrm{WTe}_2 has significant BCP tensors, leading to the generation of a Berry curvature dipole under an electric field. This effect has already been considered as the origination of the third-order nonlinear Hall effect observed in WTe2\mathrm{WTe}_2 bulk. Consequently, the nonlinear orbital Edelstein effect can be highlighted as the dominant term.

Magnetization detection using a ferromagnetic probe

The current induced out-of-plane magnetization Mc\mathbf{M}_c in WTe2\mathrm{WTe}_2 is directly measured through the detection of a magnetization-dependent voltage VMV_M using a ferromagnetic (FM) probe [6, 7, 8, 9, 10]. The VMV_M depends on the relative orientation between the Mc\mathbf{M}_c and the magnetization of the FM probe (MFM\mathbf{M}_{FM}). When Mc∥MFM∥−c\mathbf{M}_c \parallel\mathbf{M}_{FM} \parallel-c, electrons with magnetic moment of −mc-\mathbf{m}_c will diffuse from WTe2\mathrm{WTe}_2 to the FM probe, causing the FM probe to become negatively charged and yielding VM<0V_M < 0. Conversely, when Mc∥−MFM∥−c\mathbf{M}_c \parallel-\mathbf{M}_{FM} \parallel-c, electrons with magnetic moment of +mc+\mathbf{m}_c will diffuse from the FM probe to WTe2\mathrm{WTe}_2, causing the FM probe to become positively charged and yielding VM>0V_M > 0. These processes are illustrated in Figure S4-(Figure S4). One can determine that when Mc∥MFM\mathbf{M}_c \parallel\mathbf{M}_{FM}, VM<0V_M < 0, and when Mc∥−MFM\mathbf{M}_c \parallel-\mathbf{M}_{FM}, VM>0V_M > 0. Thus, by adjusting the external magnetic field to vary MFM\mathbf{M}_{FM}, a high voltage when MFM∥−Mc\mathbf{M}_{FM} \parallel-\mathbf{M}_c and a low voltage when MFM∥Mc\mathbf{M}_{FM} \parallel\mathbf{M}_c can be measured by the FM probe.

Figure S4. Illustration of the principle of magnetization detection using a ferromagnetic probe.

a,b, Left part: Application of an electric field induces polarization of the magnetic moment (mc\mathbf{m}_c) in WTe2_2. Right part: The magnetization of the Fe3_3GeTe2_2 (FGT) probe (MFM\mathbf{M}_{FM}) that can be altered by an external magnetic field. The electrochemical potential balance between states with the same mc\mathbf{m}_c in WTe2_2 and FGT results in charge transfer, and thus a voltage (VMV_M) can be measured by the FGT probe.

c, The conversion between orbital (red arrows) and spin (blue arrows) magnetic moments in WTe2_2/ferromagnet bilayers. There exist two mechanisms for spin-orbital conversion. For the first channel, the orbital magnetic moment is converted into spin through the spin-orbit coupling (SOC) in WTe2_2 and then the polarized spin is injected into the FM probe. For the second channel, the orbital angular momentum is injected into FM probe and then is converted into spin through the SOC of the FM probe. For both ways, the orbital magnetization in WTe2_2 can induce spin chemical potential imbalance in the FM probe.

This approach can be used to detect not only the spin magnetization, but also the orbital magnetization in WTe2\mathrm{WTe}_2. As illustrated in Figure S4, the orbital magnetic moment can be converted into spins through the spin-orbit coupling [49]. Therefore, the orbital polarization in WTe2\mathrm{WTe}_2 can induce spin chemical potential imbalance in the FM probe, leading to a measurable VMV_M related to the orbital magnetization in WTe2\mathrm{WTe}_2.

The choice of ferromagnetic probe electrode:

In this work, we opt for a few-layer Fe3GeTe2\mathrm{Fe}_{3}\mathrm{Ge}\mathrm{Te}_{2} (FGT) flake, a 2D layered van der Waals ferromagnet, as the magnetic probe for measuring the current-induced magnetization in WTe2\mathrm{WTe}_{2}. The orbital magnetization in WTe2\mathrm{WTe}_{2} aligns out-of-plane due to the confinement of charge carriers within a 2D plane. Given the perpendicular magnetic anisotropy of FGT, it is particularly suited for detecting the current induced out-of-plane magnetization. To provide further clarity, Figure S5 shows the hysteresis curves of the Hall resistance of the FGT as sweeping the in-plane and out-of-plane magnetic fields, respectively. As alterations in the magnetization state of FGT can impact the Hall resistance due to the anomalous Hall effect, the hysteresis curves in Figure S5 indeed reflects the magnetization variation. The distinct transitions observed in the hysteresis curves only when a magnetic field is applied along the out-of-plane direction confirm the perpendicular magnetic anisotropy of FGT in our device.

Additionally, the Curie temperature of few-layer FGT used in this work is ∼180\sim180 K [50]. In our study, the temperature for probing current-induced magnetization is below 50 K, ensuring that few-layer FGT meets the requirements for this investigation. During the measurement of current-induced magnetization in WTe2\mathrm{WTe}_{2}, we introduced a perpendicular magnetic field to manipulate the magnetization state of FGT. This enabled us to detect the magnetization-dependent voltage, representing FGT magnetization in both parallel and antiparallel orientations with respect to the current-induced magnetization. The magnitude of the applied magnetic field exceeded the coercive force of FGT, ensuring that the magnetic domain distribution did not influence the measurement results.

In our experiments, we strategically incorporate a thin hh-BN layer between the FGT and WTe2_2 layers. Its role is to act as an insulating barrier, preventing the magnetic proximity effect from FGT on the neighboring WTe2_2 layer. This ensures that any observed magnetic signals originate solely from current-induced magnetization in WTe2_2, without influence from FGT's magnetism.

Supplemental Note 4: Measurement Scheme for the nonlinear orbital Edelstein effect

The measurement scheme for the magnetization detection is shown in the Figure S6.

The disc-shaped electrodes 1-12 are used to apply current along different directions (i.e., along different angle φ\varphi). Electrodes 13 and 14 are voltage contacts. Electrode 13 connects to the WTe2_2, which is the reference non-magnetic electrode, while the electrode 14 connects to the ferromagnetic probe Fe3_3GeTe2_2, which is regarded as the magnetic probe (see also Figure S6). Figure S6 shows the measurement configuration for current along φ=0∘\varphi= 0^\circ. To rotate the current direction, we just rotate the current electrodes, for example, from electrodes 1/7 (I+/I-) to electrodes 2/8 (I+/I-), while keep the voltage contacts 13 and 14 unchanged.

Additional results of device S1

To investigate current-induced out-of-plane magnetization in WTe2\mathrm{WTe}_2, a magnetization-dependent voltage is collected via a FGT probe. An AC current is injected using the standard lock-in method, and the measured voltage is shown in Figure S7. Figure S7 shows the current-dependence of the measured second-harmonic voltage V2ωV^{2\omega}. To obtain the magnetization-related voltage signals Vm2ωV_{\mathrm{m}}^{2\omega}, a linear background is removed from V2ωV^{2\omega}.

a,b, Second-harmonic magnetization-dependent voltage Vm2ωV_m^{2\omega} at φ=70∘\varphi= 70^\circ under (a) Eω=1E^\omega= 1 kV/m and (b) Eω=−1E^\omega= -1 kV/m, respectively.

c, The loop height of the Vm2ωV_m^{2\omega}-HH hysteresis curve, ΔVm2ω\Delta V_m^{2\omega}, as a function of EωE^\omega at φ=70∘\varphi= 70^\circ.

d,e, Vm2ωV_m^{2\omega} at φ=−20∘\varphi= -20^\circ under (d) Eω=1E^\omega= 1 kV/m and (e) Eω=−1E^\omega= -1 kV/m, respectively.

f, ΔVm2ω\Delta V_m^{2\omega} as a function of EωE^\omega at φ=−20∘\varphi= -20^\circ.

The second-harmonic magnetization-dependent voltage (Vm2ωV_m^{2\omega}) is measured at different angles, all showing consistent results, as shown in Figure S8. With a fixed source-drain current, we measured the Vm2ωV_m^{2\omega} voltage drop between the FGT electrode and various reference Au electrodes. The results are shown in Figure S9. It is found that the Vm2ωV_m^{2\omega} shows negligible dependence on the reference voltage probe configurations.

Reproducible results in device S2

We fabricated Device S2 with a similar configuration to Device S1. As presented in Figure S10, Device S2 exhibits consistent results with Device S1 in terms of its second-harmonic voltage, Vm2ωV_m^{2\omega}.

The angle dependent measurement was implemented in device S2. The results are presented in Figure S11. The angle-dependence of resistance and third-order nonlinear Hall effect is well consistent with previous works [44]. The angle-dependence of RxxR_{xx} is fitted by

Rxx(θ)=Racos⁡2(φ−φ0)+Rbsin⁡2(φ−φ0),R_{xx}(\theta) = R_a\cos^2(\varphi-\varphi_0) + R_b\sin^2(\varphi-\varphi_0),

where RaR_a and RbR_b are resistance along crystalline aa and bb axis, respectively. The third-order nonlinear Hall effect was measured via standard lock-in method. The third-order nonlinear Hall effect shows angle-dependence following the formula

EH3ω(Eω)3∝cos⁡(φ−φ0)sin⁡(φ−φ0)[(χ22r4−3χ12r2)cos⁡2(φ−φ0)+(3χ21r2−χ11)sin⁡2(φ−φ0)](sin⁡2(φ−φ0)+rcos⁡2(φ−φ0))3,\frac{E_H^{3\omega}}{(E^\omega)^3} \propto\frac{\cos(\varphi-\varphi_0)\sin(\varphi-\varphi_0)\left[(\chi_{22}r^4-3\chi_{12}r^2)\cos^2(\varphi-\varphi_0)+(3\chi_{21}r^2-\chi_{11})\sin^2(\varphi-\varphi_0)\right]}{\left(\sin^2(\varphi-\varphi_0)+r\cos^2(\varphi-\varphi_0)\right)^3},

where EH3ω=VH3ωWE_H^{3\omega} = \frac{V_H^{3\omega}}{W}, Eω=IωRxxLE^\omega= \frac{I^\omega R_{xx}}{L}, VH3ωV_H^{3\omega} is the third-harmonic Hall voltage, IωI^\omega is the applied current, WW and LL are channel width and length, respectively, rr is the resistance anisotropy, χij\chi_{ij} are elements of the third-order susceptibility tensor, φ0\varphi_0 is the angle misalignment between φ=0∘\varphi= 0^\circ and the crystalline aa axis. The fitting curves yield a misalignment between the electrode base line and the crystalline axis, where the aa-axis is at around φ=6∘\varphi= 6^\circ in device S1 and φ=12∘\varphi= 12^\circ in device S2. Importantly, the ΔVm2ω\Delta V_m^{2\omega} as a function of angle φ\varphi also shows the same symmetry as the third-order nonlinear Hall effect (Figure S11), which is consistent with the BCP mechanism in WTe2_2. In addition to the second-harmonic magnetic voltage ΔVm2ω\Delta V_m^{2\omega}, the first-harmonic magnetic voltage is also observed (Figure S11), consistent with previous works [54] about the linear Edelstein effect in WTe2\mathrm{WTe}_2. The angle-dependence of the first-harmonic signal shows a sine-shaped curve with maximum value along aa axis, and zero value along bb axis. This is distinct from the second-harmonic signal where zero values are observed along both aa and bb axis. The different symmetries indicate the different physical origin of the first- and second-harmonic signals.

Discussions about the origin of the current-induced nonlinear magnetization

Contact-induced nonlinearity

The nonlinear voltage can be induced by contact-induced diode effect. However, as shown in Figure S12, the linear II-VV relationship is observed, indicating the ohmic nature of the contacts. Therefore, the scenario of contact-induced nonlinearity can be ruled out.

Image not extracted

Figure S12. (a) The characteristic IV curves of device S2 at 5 K. (b) Third-order nonlinear Hall effect at 5 K in device S2.

Nonlinear spin/orbital Hall effect

For the spin/orbital Hall effect, under the application of a current, the spin/orbit, characterized with zz-component magnetic moments, deflects towards opposing directions and accumulates respectively on two distinct edges of the sample. If there is a nonlinear version of the spin/orbital Hall effect, the measured Vm2ωV_{m}^{2\omega} should be sensitive to the configurations of the probe electrodes. This sensitivity arises from the influence of spin accumulation at the reference electrode, impacting the measured signal magnitude. In our experiments, as demonstrated in Figure S9, the Vm2ωV_{m}^{2\omega} exhibits negligible dependence on the position of reference electrode. In this setup, the FGT electrode is fixed, while the reference electrodes are positioned on the left and right sides of the source-drain current. Hence, the nonlinear spin/orbital Hall effect is not the origin of the observed phenomenon in our experiment.

Spin Seebeck effect

Applying a current in WTe2\mathrm{WTe}_2, a temperature gradient ∇T∝Ie2\nabla T \propto I_e^2 may be induced. Under this temperature gradient, a spin-polarized current may emerge if there are differences in the Seebeck coefficients between the spin-up and spin-down states.

Previous reports indicate that a current along the aa-axis can linearly generate the spin polarization along zz-direction in WTe2\mathrm{WTe}_{2} [51, 52, 53, 54], implying the presence of a specialized spin texture with some form of spin-momentum locking. Consequently, if the temperature gradient has a component along the aa-axis, out-of-plane spin polarization may be induced due to the spin Seebeck effect, proportional to ∇T∝Ie2\nabla T \propto I_{e}^{2}.

In our experiments, as illustrated in Figure S11 for the results of device S2, the ΔVm2ω\Delta V_{m}^{2\omega} exhibits the same symmetry as the third-order nonlinear Hall signals EH3ω(Eω)3\frac{E_{\mathrm{H}}^{3\omega}}{(E^{\omega})^{3}}, aligning with the the BCP mechanism in WTe2\mathrm{WTe}_{2}. Crucially, the third-order nonlinear Hall signal is zero along the aa or bb axis due to the symmetry of WTe2\mathrm{WTe}_{2} [44]. Similarly, the ΔVm2ω\Delta V_{m}^{2\omega} also approaches a minimum along the aa or bb axis. This observation contradicts the expectations of the spin Seebeck effect, where the maximum is anticipated along the aa-axis due to a specific spin texture. Therefore, the spin Seebeck effect can be ruled out as the origin of the observed second-harmonic magnetization signal.

Nonlinear Orbital and Spin Edelstein effect

In this work, the observed second-harmonic magnetization signals are attributed to the nonlinear orbital and spin Edelstein effect through the BCP tensors. Upon applying a current, the BCP tensor can result in Berry connection linearly proportional to the applied current, that is, A(1)=G⃗⃗E\mathbf{A}^{(1)} = \vec{\vec{G}}\mathbf{E}. Here G⃗⃗\vec{\vec{G}} is the BCP tensors, E\mathbf{E} is the applied electric field, and the superscript “(1)” represents that the physical quantity is the first order term of electric field. Moreover, the field-induced Berry connection would contribution to a correction term of orbital magnetic moment mk(1)=\mathbf{m}_{k}^{(1)} = −e2ℏ⟨n∣(G↔E)×∇kH∣n⟩-\frac{e}{2\hbar}\langle n|(\overleftrightarrow{\mathbf{G}}\mathbf{E})\times\nabla_{\mathbf{k}}H|n\rangle. The field-induced orbital magnetic moment shows antisymmetric distributions in the momentum space with orbit-momentum locking, thus inducing nonzero magnetoelectric coefficient αcj(1)=∫kdfdεmk,c(1)vk,j∝E\alpha_{cj}^{(1)}=\int_{\mathbf{k}}\frac{df}{d\varepsilon}m_{k,c}^{(1)}v_{k,j}\propto E. Therefore, orbital magnetization is induced by the electric field E\mathbf{E} with Mc=αcj(1)Ej∝E2M_c=\alpha_{cj}^{(1)}E_j\propto E^2, that is, nonlinear orbital Edelstein effect.

In the results of device S2 illustrated in Figure S11, the symmetry of ΔVm2ω\Delta V_m^{2\omega} is consistent with that of the third-order nonlinear Hall signals (EH3ω(Eω)3)\left(\frac{E_{\mathrm{H}}^{3\omega}}{(E^\omega)^3}\right) (Figure S12). Furthermore, a linear relationship exists between ΔVm2ω\Delta V_m^{2\omega} and the third-order nonlinear Hall effect, as depicted in Figure 4(c). These findings suggest a common origin for both the current-induced second-harmonic magnetization and the third-order nonlinear Hall effect, namely, the BCP mechanism. Through this BCP mechanism, the current generates the polarization of orbital magnetic moments by modifying Berry connection.

It is noteworthy that, owing to the presence of spin-orbit coupling in WTe2WTe_2, the orbital magnetization gives rise to a spin polarization, leading to a corresponding nonlinear spin Edelstein effect. While it can be challenging to disentangle the contributions of orbit and spin in systems with strong spin-orbit coupling, the fundamental essence of this observation is rooted in the orbital effect. The spin contribution arises as a consequence of spin-orbit coupling.

References

  1. [1]J.-C. Rojás-Sanchez, S. Oyarzún, Y. Fu, A. Marty, C. Vergnaud, S. Gambarelli, L. Vila, M. Jamet, Y. Ohtsubo, A. Taleb-Ibrahimi, P. Le Fèvre, F. Bertran, N. Reyren, J.-M. George, and A. Fert, Spin to charge conversion at room temperature by spin pumping into a new type of topological insulator: α−sn films, Phys. Rev. Lett. 116, 096602 (2016).DOI
  2. [2]B. Dieny, I. L. Prejbeanu, K. Garello, P. Gambardella, P. Freitas, R. Lehndorff, W. Raberg, U. Ebels, S. O. Demokritov, J. Akerman, A. Dec et al., Opportunities and challenges for spintronics in the microelectronics industry, Nat. Electron. 3, 446 (2020).arxiv.org/abs/1908.10584
  3. [3]J. Sinova, D. Culcer, Q. Niu, N. A. Sinitsyn, T. Jungwirth, and A. H. MacDonald, Universal intrinsic spin Hall effect, Phys. Rev. Lett. 92, 126603 (2004).DOI
  4. [4]J. Sinova, S. O. Valenzuela, J. Wunderlich, C. H. Back, and T. Jungwirth, Spin Hall effects, Rev. Mod. Phys. 87, 1213 (2015).
  5. [5]A. Manchon, H. C. Koo, J. Nitta, S. M. Frolov, and R. A. Duine, New perspectives for Rashba spin–orbit coupling, Nat. Mater. 14, 871 (2015).DOI
  6. [6]C. H. Li, O. M. J. van ’t Erve, J. T. Robinson, Y. Liu, L. Li, and B. T. Jonker, Electrical detection of charge-current-induced spin polarization due to spin-momentum locking in Bi₂Se₃, Nat. Nanotechnol. 9, 218 (2014).DOI
  7. [7]F. Yang, S. Ghatak, A. A. Taskin, K. Segawa, Y. Ando, M. Shiraishi, Y. Kanai, K. Matsumoto, A. Rosch, and Y. Ando, Switching of charge-current-induced spin polarization in the topological insulator BiSbTeSe₂, Phys. Rev. B 94, 075304 (2016).DOI
  8. [8]B.-C. Lin, S. Wang, A.-Q. Wang, Y. Li, R.-R. Li, K. Xia, D. Yu, and Z.-M. Liao, Electric control of Fermi arc spin transport in individual topological semimetal nanowires, Phys. Rev. Lett. 124, 116802 (2020).DOI
  9. [9]J.-i. Inoue, G. E. W. Bauer, and L. W. Molenkamp, Diffuse transport and spin accumulation in a Rashba two-dimensional electron gas, Phys. Rev. B 67, 033104 (2003).DOI
  10. [10]A.-Q. Wang, P.-Z. Xiang, X.-G. Ye, W.-Z. Zheng, D. Yu, and Z.-M. Liao, Room-temperature manipulation of spin texture in a Dirac semimetal, Phys. Rev. Appl. 14, 054044 (2020).DOI
  11. [11]A. R. Mellnik, J. S. Lee, A. Richardella, J. L. Grab, P. J. Mintun, M. H. Fischer, A. Vaezi, A. Manchon, E.-A. Kim, N. Samarth, and D. C. Ralph, Spin-transfer torque generated by a topological insulator, Nature (London) 511, 449 (2014).DOI
  12. [12]L. Liu, C.-F. Pai, Y. Li, H. W. Tseng, D. C. Ralph, and R. A. Buhrman, Spin-torque switching with the giant spin Hall effect of tantalum, Science 336, 555 (2012).DOI
  13. [13]E. Santos, J. E. Abrão, D. Go, L. K. de Assis, Y. Mokrousov, J. B. S. Mendes, and A. Azevedo, Inverse orbital torque via spin-orbital entangled states, Phys. Rev. Appl. 19, 014069 (2023).arxiv.org/abs/2204.01825
  14. [14]H. An, Y. Kageyama, Y. Kanno, N. Enishi, and K. Ando, Spin–torque generator engineered by natural oxidation of Cu, Nat. Commun. 7, 13069 (2016).DOI
  15. [15]K. Hasegawa, Y. Hibino, M. Suzuki, T. Koyama, and D. Chiba, Enhancement of spin-orbit torque by inserting CoOₓ layer into Co/Pt interface, Phys. Rev. B 98, 020405(R) (2018).DOI
  16. [16]K. Yuito, T. Yuya, A. Hongyu, H. Takashi, G. Tenghua, J. Shi, and A. Kazuya, Spin-orbit torque manipulated by fine-tuning of oxygen-induced orbital hybridization, Sci. Adv. 5, eaax4278 (2019).
  17. [17]J. Kim, D. Go, H. Tsai, D. Jo, K. Kondou, H.-W. Lee, and Y. Otani, Nontrivial torque generation by orbital angular momentum injection in ferromagnetic-metal/Cu/Al₂O₃ trilayers, Phys. Rev. B 103, L020407 (2021).DOI
  18. [18]D. Go, D. Jo, C. Kim, and H.-W. Lee, Intrinsic spin and orbital Hall effects from orbital texture, Phys. Rev. Lett. 121, 086602 (2018).DOI
  19. [19]D. Jo, D. Go, and H.-W. Lee, Gigantic intrinsic orbital Hall effects in weakly spin-orbit coupled metals, Phys. Rev. B 98, 214405 (2018).DOI
  20. [20]D. Go, D. Jo, T. Gao, K. Ando, S. Blügel, H.-W. Lee, and Y. Mokrousov, Orbital Rashba effect in a surface-oxidized Cu film, Phys. Rev. B 103, L121113 (2021).DOI
  21. [21]Y.-G. Choi, D. Jo, K.-H. Ko, D. Go, K.-H. Kim, H. G. Park, C. Kim, B.-C. Min, G.-M. Choi, and H.-W. Lee, Observation of the orbital Hall effect in a light metal Ti, Nature (London) 619, 52 (2023).DOI
  22. [22]M.-C. Chang and Q. Niu, Berry phase, hyperorbits, and the Hofstadter spectrum: Semiclassical dynamics in magnetic bloch bands, Phys. Rev. B 53, 7010 (1996).pubmed.ncbi.nlm.nih.gov/9982146
  23. [23]D. Xiao, W. Yao, and Q. Niu, Valley-contrasting physics in graphene: Magnetic moment and topological transport, Phys. Rev. Lett. 99, 236809 (2007).DOI
  24. [24]S. Bhowal and S. Satpathy, Intrinsic orbital moment and prediction of a large orbital Hall effect in two-dimensional transition metal dichalcogenides, Phys. Rev. B 101, 121112(R) (2020).DOI
  25. [25]S. Bhowal and G. Vignale, Orbital Hall effect as an alternative to valley Hall effect in gapped graphene, Phys. Rev. B 103, 195309 (2021).DOI
  26. [26]T. Yoda, T. Yokoyama, and S. Murakami, Current-induced orbital and spin magnetizations in crystals with helical structure, Sci. Rep. 5, 12024 (2015).DOI
  27. [27]T. Yoda, T. Yokoyama, and S. Murakami, Orbital Edelstein effect as a condensed-matter analog of solenoids, Nano Lett. 18, 916 (2018).DOI
  28. [28]A. El Hamdi, J.-Y. Chauleau, M. Boselli, C. Thibault, C. Gorini, A. Smogunov, C. Barreteau, S. Gargiulo, J.-M. Triscone, and M. Viret, Observation of the orbital inverse Rashba–Edelstein effect, Nat. Phys. 19, 1855 (2023).DOI
  29. [29]J. Ma and D. A. Pesin, Chiral magnetic effect and natural optical activity in metals with or without Weyl points, Phys. Rev. B 92, 235205 (2015).DOI
  30. [30]S. Zhong, J. E. Moore, and I. Souza, Gyrotropic magnetic effect and the magnetic moment on the Fermi surface, Phys. Rev. Lett. 116, 077201 (2016).DOI
  31. [31]J. Rou, C. Şahin, J. Ma, and D. A. Pesin, Kinetic orbital moments and nonlocal transport in disordered metals with nontrivial band geometry, Phys. Rev. B 96, 035120 (2017).DOI
  32. [32]L.-k. Shi and J. C. W. Song, Symmetry, spin-texture, and tunable quantum geometry in a WTe₂ monolayer, Phys. Rev. B 99, 035403 (2019).DOI
  33. [33]K. Osumi, T. Zhang, and S. Murakami, Kinetic magnetoelectric effect in topological insulators, Commun. Phys. 4, 211 (2021).DOI
  34. [34]D. G. Ovalle, A. Pezo, and A. Manchon, Orbital Kerr effect and terahertz detection via the nonlinear Hall effect, Phys. Rev. B 110, 094439 (2024).arxiv.org/abs/2311.11889
  35. [35]C. Xiao, H. Liu, W. Wu, H. Wang, Q. Niu, and S. A. Yang, Intrinsic nonlinear electric spin generation in centrosymmetric magnets, Phys. Rev. Lett. 129, 086602 (2022).DOI
  36. [36]M. N. Ali, J. Xiong, S. Flynn, J. Tao, Q. D. Gibson, L. M. Schoop, T. Liang, N. Haldolaarachchi, M. Hirschberger, N. P. Ong, and R. J. Cava, Large, non-saturating magnetoresistance in WTe₂, Nature (London) 514, 205 (2014).DOI
  37. [37]S. Wu, V. Fatemi, Q. D. Gibson, K. Watanabe, T. Taniguchi, R. J. Cava, and P. Jarillo-Herrero, Observation of the quantum spin Hall effect up to 100 kelvin in a monolayer crystal, Science 359, 76 (2018).DOI
  38. [38]E. Sajadi, T. Palomaki, Z. Fei, W. Zhao, P. BemPnt, C. Olsen, S. Luescher, X. Xu, J. A. Folk H, and D. H. Cobden, Gate-induced superconductivity in a monolayer topological insulator, Science 362, 922 (2018).DOI
  39. [39]V. Fatemi, S. Wu, Y. Cao, L. BetheaU, Q. D. Gibson, K. Watanabe, T. Taniguchi, R. J. Cava, and P. Jarillo-Herrero, Electrically tunable low-density superconductivity in a monolayer topological insulator, Science 362, 926 (2018).DOI
  40. [40]M. Kim, S. Han, J. H. Kim, J.-U. Lee, Z. Lee, and H. Cheong, Determination of the thickness and orientation of few-layer tungsten ditelluride using polarized Raman spectroscopy, 2D Mater. 3, 034004 (2016).DOI
  41. [41]H. Wang, Y.-X. Huang, H. Liu, X. Feng, J. Zhu, W. Wu, C. Xiao, and S. A. Yang, Orbital origin of the intrinsic planar Hall effect, Phys. Rev. Lett. 132, 056301 (2024).DOI
  42. [42]H. Liu, J. Zhao, Y.-X. Huang, X. Feng, C. Xiao, W. Wu, S. Lai, W.-b. Gao, and S. A. Yang, Berry connection polarizability tensor and third-order Hall effect, Phys. Rev. B 105, 045118 (2022).DOI
  43. [43]Y. Gao, S. A. Yang, and Q. Niu, Field induced positional shift of Bloch electrons and its dynamical implications, Phys. Rev. Lett. 112, 166601 (2014).DOI
  44. [44]S. Lai, H. Liu, Z. Zhang, J. Zhao, X. Feng, N. Wang, C. Tang, Y. Liu, K. S. Novoselov, S. A. Yang, and W.-B. Gao, Third-order nonlinear Hall effect induced by the Berry-connection polarizability tensor, Nat. Nanotechnol. 16, 869 (2021).DOI
  45. [45]T. Thonhauser, D. Ceresoli, D. Vanderbilt, and R. Resta, Orbital magnetization in periodic insulators, Phys. Rev. Lett. 95, 137205 (2005).pubmed.ncbi.nlm.nih.gov/16197172
  46. [46]J. C. W. Song and G. Vignale, Low-dissipation edge currents without edge states, Phys. Rev. B 99, 235405 (2019).DOI
  47. [47]See Supplemental Material about method of device fabrication and transport measurements, theoretical calculations and symmetry discussions about nonlinear Edelstein effect, the schematics about direct magnetic detection, additional experimental results, and the discussions about the origin of the current-induced nonlinear magnetization, which includes Refs. [48–54].
  48. [48]C. Xiao, W. Wu, H. Wang, Y.-X. Huang, X. Feng, H. Liu, G.-Y. Guo, Q. Niu, and S. A. Yang, Time-reversal-even nonlinear current induced spin polarization, Phys. Rev. Lett. 130, 166302 (2023).DOI
  49. [49]D. Lee, D. Go, H.-J. Park, W. Jeong, H.-W. Ko, D. Yun, D. Jo, S. Lee, G. J. H. O. Choi, H. K.-J. Kim, B.-G. Park, B.-C. Min, H. C. Koo, H.-W. Lee, O. Lee, and K.-J. Lee, Orbital torque in magnetic bilayers, Nat. Commun. 12, 6710 (2021).DOI
  50. [50]X.-G. Ye, P.-F. Zhu, W.-Z. Xu, N. Shang, K. Liu, and Z.-M. Liao, Orbit-transfer torque driven field-free switching of perpendicular magnetization, Chin. Phys. Lett. 39, 037303 (2022).DOI
  51. [51]P. Li, W. Wu, Y. Wen, C. Zhang, J. Zhang, S. Zhang, Z. Yu, S. A. Yang, A. Manchon, and X.-X. Zhang, Spin-momentum locking and spin-orbit torques in magnetic nano-heterojunctions composed of Weyl semimetal WTe₂, Nat. Commun. 9, 3990 (2018).DOI
  52. [52]B. Zhao, K. Parpiak, D. Khokhlov, A. Johansson, A. Md. Hoque, X. Xu, Y. Jiang, I. Mertig, and S. P. Dash, Unconventional charge-spin conversion in Weyl-semimetal WTe₂, Adv. Mater. 32, 2000818 (2020).DOI
  53. [53]S. Shi, J. Li, C.-H. Hsu, K. Lee, Y. Wang, J. Yang, J. Wang, Q. Wang, H. Wu, W. Zhang, G. Eda, G. Liang, H. Chang, and H. Yang, Observation of the out-of-plane polarized spin current from CVD grown WTe₂, Adv. Quantum Technol. 4, 2100038 (2021).arxiv.org/abs/2106.04154
  54. [54]K. Ohnishi, M. Aoki, R. Ohshima, E. Shigematsu, Y. Ando, T. Takenobu, and M. Shiraishi, All-electric spin device operation using the Weyl semimetal, WTe₂, at room temperature, Adv. Electron. Mater. 9, 2200647 (2023).DOI
  55. [55]I. Baek, S. Han, S. Cheon, and H.-W. Lee, Nonlinear orbital and spin Edelstein effect in centrosymmetric metals, npj Spintronics 2, 33 (2024).arxiv.org/abs/2310.05113
  56. [56]H. Rostami and M. Polini, Nonlinear anomalous photocurrents in Weyl semimetals, Phys. Rev. B 97, 195151 (2018).DOI
  57. [57]Z.-C. Pan, D. Li, X.-G. Ye, Z. Chen, Z.-H. Chen, A.-Q. Wang, M. Tian, G. Yao, K. Liu, and Z.-M. Liao, Room-temperature orbit-transfer torque enabling van der Waals magnetoresistive memories, Sci. Bull. 68, 2743 (2023).DOI

Paper details

vlnc:W_ntv4dc3p
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents