betaFeedback

WorksMathematics

Curvature distributions and the Steiner formula for characteristic surfaces in the Heisenberg group

Abstract

We establish a new Steiner-type formula for smooth surfaces in the sub-Riemannian Heisenberg group. The main novelty is that we admit characteristic points, whose presence produces nontrivial singularities both of the distance from the surface and of its tubular neighborhood. Such singularities are reflected in the Steiner formula: the expansion up to a given order N≥4N\geq 4 of the volume of the ε\varepsilon-tubular neighborhood TS(ε)\mathcal T_S(\varepsilon) of a surface SS is no longer polynomial, in general, taking the form vol(TS(ε))=∑j=13αjεj+∑n=4N(αn+βnlog⁡ε)εn+o(εN),as ε→0+. \mathrm{vol}(\mathcal T_S(\varepsilon)) = \sum_{j=1}^3α_j\varepsilon^j+\sum_{n=4}^N \left(α_n+β_n\log\varepsilon\right)\varepsilon^n+o(\varepsilon^N),\qquad\text{as }\varepsilon\to0^+ . More precisely, under a geometric stability condition on characteristic points, we prove that the first three coefficients are integrals over SS of locally integrable curvature densities, coinciding with those known in the non-characteristic case. A new phenomenon appears at order 44, equal to the homogeneous dimension of the Heisenberg group, where logarithmic terms may occur. We show that the higher-order coefficients are naturally described by a distributional analogue of Federer's curvature measures, whose logarithmic components are supported on the characteristic set. We compute the fourth-order coefficients explicitly. The proof is based on different ingredients of independent interest: (i) an explicit formula for the cut time of homogeneous surfaces, (ii) a fine analysis of the normal exponential map through blow-ups, (iii) the study of the stability of the surface cut locus under perturbations.

Introduction

A classical result in integral geometry is Steiner’s formula [27, 28, 20]. In its Euclidean form, it describes the volume of a small neighborhood of a regular domain as a polynomial in the radius. If Ω⊂Rn\Omega\subset\mathbb{R}^{n} is a bounded domain with smooth boundary S=∂ΩS = \partial\Omega, and Ωε\Omega_{\varepsilon} denotes its ε\varepsilon-neighborhood, then there is ε0>0\varepsilon_{0} > 0 such that

vol⁡(Ωε)=vol⁡(Ω)+∑k=1nak(S)εk,∀ ε∈[0,ε0],\operatorname{vol}(\Omega_{\varepsilon}) = \operatorname{vol}(\Omega) + \sum_{k=1}^{n} a_{k}(S)\varepsilon^{k}, \qquad\forall\ \varepsilon\in[0,\varepsilon_{0}],

The coefficients ak(S)a_{k}(S), also known as Minkowski quermassintegrals, can be expressed as integrals over SS of symmetric homogeneous polynomials of its principal curvatures.

A closely related statement is the so-called half-tube formula. If S⊂RnS \subset\mathbb{R}^{n} is a compact embedded hypersurface, boundary of a regular domain S=∂ΩS = \partial\Omega, one may consider the half-tube of radius $\varepsilon > 0

TS(ε)=Ωε∖Ω,T_{S}(\varepsilon) = \Omega_{\varepsilon} \setminus\Omega,

which is the set of points whose distance from SS is at most ε\varepsilon, lying outside of Ω\Omega. In this case the half-tube formula reduces to the non-constant part of Steiner’s formula:

vol⁡(TS(ε))=∑k=1nak(S)εk,∀ ε∈[0,ε0].\operatorname{vol}(T_{S}(\varepsilon)) = \sum_{k=1}^{n} a_{k}(S)\varepsilon^{k}, \qquad\forall\ \varepsilon\in[0,\varepsilon_{0}].

In the simplest case of a surface SS embedded in R3\mathbb{R}^{3}, the half-tube formula for small radii is written as

vol⁡(TS(ε))=ε∫SdA−ε2∫SHdA+ε33∫SKdA,(1)\operatorname{vol}(T_{S}(\varepsilon)) = \varepsilon\int_{S} dA - \varepsilon^{2} \int_{S} H dA + \frac{\varepsilon^{3}}{3} \int_{S} K dA, \tag*{(1)}

where HH and KK are the mean and Gaussian curvature of SS and dAdA is the Riemannian area measure.

If the ambient space is an nn-dimensional Riemannian manifold, the Riemannian volume of TS(ε)T_{S}(\varepsilon) is no longer, in general, a polynomial in ε\varepsilon. Nevertheless, it admits an asymptotic expansion in powers of ε\varepsilon, as ε→0\varepsilon\to0. The coefficients are expressed in terms of the Riemannian curvature of the ambient manifold and of the extrinsic geometry of the submanifold; see, for instance, [20].

Tube formulae have been studied beyond the smooth setting. Federer’s theory of sets of positive reach provides a powerful framework in which Steiner-type formulae continue to hold [17] and coefficients can be interpreted as the total mass of the so-called curvature measures.

The sub-Riemannian setting

In the sub-Riemannian setting, the study of embedded surfaces and of the volumes of their tubular neighborhoods has recently begun to attract new attention. For general results on embedded surfaces in contact sub-Riemannian manifolds see e.g. [10, 8, 2, 3, 12], while for volumes of tubes around non-characteristic submanifolds see [13, 23, 9, 15]. One of the main motivations is to understand whether curvature-like invariants of submanifolds can be recovered from the coefficients of the corresponding asymptotic expansions.

This theme is particularly interesting even in the simplest case of a surface SS embedded in the sub-Riemannian Heisenberg group H1\mathbb{H}^{1}, which is R3\mathbb{R}^{3} endowed with the contact distribution

D=span⁡{X1,X2},X1:=∂x−y2∂z,X2:=∂y+x2∂z,\mathcal{D}=\operatorname{span}\{X_{1},X_{2}\},\qquad X_{1}:=\partial_{x}-\frac{y}{2}\partial_{z},\qquad X_{2}:=\partial_{y}+\frac{x}{2}\partial_{z},

and the sub-Riemannian metric gg is defined by promoting the pair X1,X2X_{1},X_{2} to an orthonormal frame.

The main source of difficulty in extending Steiner formula to the sub-Riemannian setting is given by the presence of characteristic points, namely points at which the horizontal distribution is tangent to the surface. These points define the characteristic set

Σ(S):={p∈S:TpS=Dp}.\Sigma(S):=\{p\in S:T_{p}S=\mathcal{D}_{p}\}.

As we observe in § 6.1, in any neighborhood of a characteristic point there is at least one point reached by more than one minimizing geodesic. Thus, the presence of characteristic points forces the surface SS to have zero (sub-Riemannian) reach in the sense of Federer, falling outside the positive reach framework.

For a compact surface SS embedded in the Heisenberg group H1\mathbb{H}^{1}, under the assumption that SS is non-characteristic, i.e., Σ(S)=∅\Sigma(S)=\varnothing, a formula analogous to (1) was obtained in [13]. Their formula takes the form

vol⁡(TS(ε))=∑n=1∞an(S) εn,\operatorname{vol}(T_{S}(\varepsilon))=\sum_{n=1}^{\infty}a_{n}(S)\,\varepsilon^{n},

with coefficients expressed as integrals of the so called curvature forms, introduced below.

In this paper we obtain a Steiner type formula for smooth compact surfaces with non-degenerate, geometrically stable characteristic points, with these conditions specified below. The essential issue in computing the half-tube volume integral is that characteristic points produce non trivial singularities both of the distance from the surface and of its tubular neighborhood, as we now explain.

The tube integral and the curvature forms

Let S=∂Ω⊂H1S=\partial\Omega\subset\mathbb{H}^{1} be a smooth embedded surface oriented towards the complement of Ω\Omega. We denote by dist⁡S\operatorname{dist}_{S} the signed sub-Riemannian distance from Ω\Omega, positive outside of it, and for ε>0\varepsilon>0, consider the positive half-tube

TS(ε)={q∈H1:0<dist⁡S(q)≤ε}.T_{S}(\varepsilon)=\{q\in\mathbb{H}^{1}:0<\operatorname{dist}_{S}(q)\leq\varepsilon\}.

At every p∈S∖Σ(S)p\in S\setminus\Sigma(S) there is a unique unit-speed normal geodesic γp\gamma_{p} starting from pp, which for sufficiently short times is valued in H1∖Ω\mathbb{H}^{1}\setminus\Omega and realizes the distance from SS. The normal exponential map is then defined as

exp⁡S⊥:R+×S∖Σ(S)⟶H1,exp⁡S⊥(t,p):=γp(t).(2)\exp_{S}^{\perp}:\mathbb{R}^{+}\times S\setminus\Sigma(S)\longrightarrow\mathbb{H}^{1},\qquad\exp_{S}^{\perp}(t,p):=\gamma_{p}(t). \tag*{(2)}

Although smooth on its domain, the normal exponential map does not admit a smooth extension across the characteristic set (see § 6.4). This is consistent with the fact that no unit-speed geodesic realizing the distance from SS starts at a characteristic point (see Lemma 3.3). The maximal interval of length-minimality of a normal geodesic defines the cut time

tcut(p):=sup⁡{t>0:dist⁡S(γp(t))=t},p∈S∖Σ(S).t_{\mathrm{cut}}(p):=\sup\{t>0:\operatorname{dist}_{S}(\gamma_{p}(t))=t\},\qquad p\in S\setminus\Sigma(S).

Since every point in H1∖Ω\mathbb{H}^{1}\setminus\Omega is reached by at least one minimizing geodesic, we can parametrize the tube as

TS(ε)={exp⁡S⊥(t,p):p∈S∖Σ(S), 0<t≤min⁡{ε,tcut(p)}}.T_{S}(\varepsilon)=\{\exp_{S}^{\perp}(t,p):p\in S\setminus\Sigma(S),\ 0<t\leq\min\{\varepsilon,t_{\mathrm{cut}}(p)\}\}.

The same formula, with SS replaced by a compact subset U⊂SU\subset S, defines the localized half-tube TU(ε)T_{U}(\varepsilon), consisting of points reached by minimizers based in U⊂SU\subset S. In § 6.1 we show that such parametrization is actually a diffeomorphism outside of a negligible set. The change of variables formula then gives

vol⁡(TU(ε))=∫U∖Σ(S)∫0min⁡{ε,tcut(p)}JS(t,p) dt∧dp.(3)\operatorname{vol}(T_{U}(\varepsilon))=\int_{U\setminus\Sigma(S)}\int_{0}^{\min\{\varepsilon,t_{\mathrm{cut}}(p)\}}J_{S}(t,p)\,\mathrm{d}t\wedge\mathrm{d}p. \tag*{(3)}

where we have denoted

JS(t,p) dt∧dp:=(exp⁡S⊥)∗(dx∧dy∧dz),p∈S∖Σ(S).J_S(t,p)\,\mathrm{d}t\wedge\mathrm{d}p := (\exp^\perp_S)^*(\mathrm{d}x\wedge\mathrm{d}y\wedge\mathrm{d}z), \qquad p\in S\setminus\Sigma(S).

Note that, by the change of variable formula, JS(t,p)J_S(t,p) is the Jacobian determinant of the normal exponential map computed in the coordinates (t,p)∈R+×(S∖Σ(S))(t,p)\in\mathbb{R}^{+}\times(S\setminus\Sigma(S)).

If UU is non-characteristic, the cut time is uniformly bounded below. Thus, for all sufficiently small ε\varepsilon, the minimum in (3) can be replaced by ε\varepsilon. Then, as rigorously established in [13, 15], a Steiner formula for non-characteristic surfaces can be obtained by Taylor expanding JS(t,p)J_S(t,p) in time along the normal geodesics and integrating term by term. More explicitly, writing

σS(n):=∂tnJS(0,p) dp,p∈S, n∈N,(4)\sigma_S^{(n)}:=\partial_t^nJ_S(0,p)\,\mathrm{d}p,\qquad p\in S,\ n\in\mathbb{N}, \tag*{(4)}

using U∖Σ(S)=UU\setminus\Sigma(S)=U and min⁡{tcut(p),ε}=ε\min\{t_{\mathrm{cut}}(p),\varepsilon\}=\varepsilon, and exchanging the order of integration in (3) one finds

vol⁡(TU(ε))=∑n=1∞εnan(U),an(U):=1n!∫UσS(n−1).(5)\operatorname{vol}(T_U(\varepsilon))=\sum_{n=1}^{\infty}\varepsilon^n a_n(U),\qquad a_n(U):=\frac{1}{n!}\int_U\sigma_S^{(n-1)}. \tag*{(5)}

We call σS(n)∈Λ2(S∖Σ(S))\sigma_S^{(n)}\in\Lambda^2(S\setminus\Sigma(S)) the nn-th curvature form. In particular, σS(0)=σH\sigma_S^{(0)}=\sigma_H is the horizontal area form. If NN denotes the horizontal gradient of the signed distance from SS, which restricts to SS to the sub-Riemannian unit normal, then

σS(n)=div⁡n(N) σH.\sigma_S^{(n)}=\operatorname{div}^{n}(N)\,\sigma_H.

where div⁡n(N)\operatorname{div}^{n}(N) is the nn-th divergence of NN (cf. § 6.7). Following [9], the first three curvature forms can be expressed explicitly as

σS(0)=σH,σS(1)=−H σH,σS(2)=(−N(H)+H2)σH,\sigma_S^{(0)}=\sigma_H,\qquad\sigma_S^{(1)}=-\mathcal{H}\,\sigma_H,\qquad\sigma_S^{(2)}=(-N(\mathcal{H})+\mathcal{H}^2)\sigma_H,

where H\mathcal{H} is the sub-Riemannian mean curvature.

In the presence of characteristic points, however, in computing the half-tube volume one encounters two new main difficulties.

  1. The singular behavior of exp⁡S⊥(t,p)\exp^\perp_S(t,p) as pp approaches Σ(S)\Sigma(S) is reflected in a singular behavior of the integrand JS(t,p) dt∧dpJ_S(t,p)\,\mathrm{d}t\wedge\mathrm{d}p. Computing the volume asymptotics thus requires control of these singularities and of their contribution to the integral.

  2. The cut time tcut(p)t_{\mathrm{cut}}(p) tends to zero as pp approaches Σ(S)\Sigma(S) (cf. Corollary 3.11). Hence, for any fixed ε>0\varepsilon>0, the minimum cannot be replaced by ε\varepsilon uniformly near the characteristic set. The cut time therefore determines a nontrivial integration domain whose dependence on ε\varepsilon must be controlled.

We face these difficulties for surfaces having non-degenerate characteristic points (cf. Definition 2.2). We start by analyzing the simplest example, the horizontal plane in the Heisenberg group.

The horizontal plane.

Let us consider the surface S0S_0 in H1\mathbb{H}^1 given by

S0:={(x,y,z)∈H1:z=0},S_0:=\{(x,y,z)\in\mathbb{H}^1:z=0\},

References

  1. [1]A. Agrachev, D. Barilari, and U. Boscain. A comprehensive introduction to sub-Riemannian geometry, volume 181 of Cambridge Studies in Advanced Mathematics. Cambridge University Press, Cambridge, 2020. From the Hamiltonian viewpoint, With an appendix by Igor Zelenko.DOI
  2. [2]A. A. Agrachev, S. Baranzini, E. Bellini, and L. Rizzi. Quantitative tightness for three-dimensional contact manifolds: a sub-Riemannian approach. Nonlinearity, 38(11):Paper No. 115011, 62, 2025.DOI
  3. [3]R. Adami, U. Boscain, D. Prandi, and L. Tessarolo. Schrödinger evolution on surfaces in 3D contact sub-Riemannian manifolds. J. Differential Equations, 453(part 5):Paper No. 113915, 29, 2026.arxiv.org/abs/2502.16186
  4. [4]A. A. Agrachev. Exponential mappings for contact sub-Riemannian structures. J. Dynam. Control Systems, 2(3):321–358, 1996.DOI
  5. [5]V. I. Arnold, S. M. Gusein-Zade, and A. N. Varchenko. Singularities of differentiable maps. Volume 1. Modern Birkhäuser Classics. Birkhäuser/Springer, New York, 1985 edition, 2012. Classification of critical points, caustics and wave fronts, Translated from the Russian by Ian Porteous based on a previous translation by Mark Reynolds.DOI
  6. [6]A. A. Agrachev and Y. L. Sachkov. Control Theory from the Geometric Viewpoint. Springer Berlin, Heidelberg, 2010.
  7. [7]Z. M. Balogh. Size of characteristic sets and functions with prescribed gradient. Journal fur die Reine und Angewandte Mathematik. [Crelle’s Journal], 564:63–83, 2003.DOI
  8. [8]E. Bellini and U. Boscain. Surfaces of genus g ≥ 1 in 3D-contact sub-Riemannian manifolds. ESAIM: COCV, 29(79), 2023.
  9. [9]D. Barilari and T. Bossio. Steiner and tube formulae in 3D contact sub-Riemannian geometry. Commun. Contemp. Math., 26(7):Paper No. 2350034, 40, 2024.
  10. [10]D. Barilari, U. Boscain, and D. Cannarsa. On the induced geometry on surfaces in 3D contact sub-Riemannian manifolds. Control Optim. Calc. Var. 28, 109, 2022.DOI
  11. [11]D. Barilari, E. Bellini, and A. Pinamonti. Curvature measures and the sub-Riemannian Gauss-Bonnet theorem. ArXiv Preprint 2509.26460, 2025.arxiv.org/abs/2509.26460
  12. [12]E. Bellini. On the tightness of left-invariant contact structures. Bull. Lond. Math. Soc., 58(6):Paper No. e70402, 12, 2026.arxiv.org/abs/2504.06085
  13. [13]Z. M. Balogh, F. Ferrari, B. Franchi, E. Vecchi, and K. Wildrick. Steiner’s formula in the Heisenberg group. Nonlinear Anal., 126:201–217, 2015.DOI
  14. [14]D. Barilari and L. Rizzi. Sub-Riemannian interpolation inequalities. Invent. Math., 215(3):977–1038, 2019.
  15. [15]T. Bossio, L. Rizzi, and T. Rossi. Tubes in sub-Riemannian geometry and a Weyl’s invariance result for curves in the Heisenberg groups. Annali della Scuola Normale Superiore di Pisa, Classe di Scienze, 2026. To appear.arxiv.org/abs/2408.16838
  16. [16]M. P. do Carmo. Riemannian Geometry. Mathematics: Theory and Applications. Birkhäuser Boston, MA, 1992.DOI
  17. [17]H. Federer. Curvature measures. Trans. Amer. Math. Soc., 93:418–491, 1959.
  18. [19]M. Grosser, M. Kunzinger, M. Oberguggenberger, and R. Steinbauer. Geometric theory of generalized functions with applications to general relativity, volume 537 of Mathematics and its Applications. Kluwer Academic Publishers, Dordrecht, 2001.DOI
  19. [20]A. Gray. Tubes, volume 221 of Progress in Mathematics. Birkhäuser Verlag, Basel, second edition, 2004. With a preface by Vicente Miquel.
  20. [21]G. Ishikawa. Infinitesimal deformations and stability of singular Legendre submanifolds. Asian Journal of Mathematics, 9(1):133–166, 2005.DOI
  21. [22]M. Kokubu, W. Rossman, K. Saji, M. Umehara, and K. Yamada. Singularities of flat fronts in hyperbolic space. Pacific J. Math., 221(2):303–351, 2005.arxiv.org/abs/math/0401110
  22. [23]M. Ritoré. Tubular neighborhoods in the sub-Riemannian Heisenberg groups. Adv. Calc. Var., 14(1):1–36, 2021.
  23. [24]T. Rossi. Integrability of the sub-Riemannian mean curvature at degenerate characteristic points in the Heisenberg group. Adv. Calc. Var., 16(1):99–110, 2023.
  24. [25]L. Rizzi and T. Rossi. Heat content asymptotics for sub-riemannian manifolds. Journal de Mathématiques Pures et Appliquées, 148:267–307, 2021.DOI
  25. [26]L. Rizzi and U. Serres. On the cut locus of free, step two Carnot groups. Proc. Amer. Math. Soc., 145(12):5341–5357, 2017.DOI
  26. [27]J. Steiner. über parallele flächen. Monatsber. Preu. Akad. Wiss, page 114–118, 1840.
  27. [28]H. Weyl. On the Volume of Tubes. Amer. J. Math., 61(2):461–472, 1939.DOI

Paper details

vlnc:W_p75tdfeh
Version
v1 · latest
Published
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Mathematics

Not recorded for this paper

View statement
Looking for related papers…
Contents