WorksPhysics and Astronomy
Universal Mass Equation for Equal-Quantum Excited-States Sets~III
Abstract
Using our simple logarithmic Universal Mass Equation, we considered heavy non- meson states. PDG2026 reported a series of mesons with quantum numbers not allowed for standard states. Using LQCD predictions, we evaluated a scalar and tensor glueball series for which predictions are available. This approach allows us to predict heavy states that require future experimental studies. Additionally, we consider the possible misidentification of some meson states.
Introduction
Sixty years ago, the invention of quantum chromodynamics (QCD), which explains the confinement of quarks in mesons and baryons and forms a large part of the Standard Model of elementary particles and forces, was fundamental to our understanding of particle physics [1, 2]. QCD gives rise to the hadron spectrum, and many and states have been observed, as the recent Particle Data Group (PDG) reported [3].
At first sight, the seemingly simple picture of hadrons emerging from QCD is, in fact, deceptive. The complex field-theoretical dynamics lead to a large variety of spectroscopic configurations. The basic constituents, quarks and gluons, interact in manifold ways, leading to a variety of intrinsic configurations that form the hadron’s inner confined core. Illustrations, for instance, of elementary quark-gluon configurations of mesons: meson, tetraquark, and hadro-quarkonium; and baryons: baryon, hybrid-baryon, and pentaquark. The additiontional configuration is a glueball meson, i.e., an extremely exotic hadron consisting solely of self-interacting gluons. The search for such kinds of exotic states has a long history.
In our previous publications [4, 5](RS), we reported a simple logarithmic Universal Mass Equation (UME) that fits excited-state masses for increasing radial excitation and otherwise equal quantum indicators. The fits worked well for all baryon, meson, and some exotic categories where data were available two years ago [6]. Our Part I [4] introduced a logarithmic formula, Eq. (1), that described the spectra of baryons and mesons using data from the Particle Data Listings [6]. The UME is
where is the radial quantum number, and and are free parameters in a minimization procedure using Breit-Wigner (BW) PDG data [6]. We use a Naming Scheme for Hadrons following Ref. [7]. The parameter is the logarithmic slope, and is the ground-state mass in the data set , since ; however, in a fit, may vary slightly from . Using PDG low-lying (including ground) states, one can predict high-lying states that PDG does not yet report – “missed” states [8]. Our Part II [5] used data sets with only two known excited states with masses and (duo sets), which have reasonably low measurement uncertainties. Here, the parameter is set to exactly.
Due to the high experimental activity by the ATLAS, BaBar, BES, Belle, CMS, COM-PASS, LHCb, and SND collaborations, the PDG is non-stop collecting new resonances. This is evident when comparing the two-year-old editions [6] and the fresh editions by 2026 [3]. In this paper (Part III), we will follow our recent studies [4, 5] and focus mainly on two types of exotics: tetraquarks and glueballs.
UME FOR NEW STATES
Actually, the PDG2026 reported several bump-hunting results with mostly unknown quantum numbers. We will present results known by PDG2026 [3] with quantum numbers: , where is isospin, is -parity, is total angular momentum (spin), is parity, and is charge conjugation parity. We will focus on mesons whose properties are incompatible with a structure (exotic state) [9].
UME for
The properties of the are incompatible with a structure (exotic state) [3]. UME results are shown in Figure 1 and Table I. . Observed by the LHCb Collaboration in with , using an amplitude analysis of with a significance of [10]. The assignment is favored with high significance.

Figure 1. UME for . The first two blue filled circle data points are from [3]. The four magenta filled diamond points are projected excited states. The UME equation Eq. (1) is MeV. The red solid curve represents the best-fit result and its extrapolations for the four heavy-lying states.
| PDG2026 (GeV) | Best-fit (GeV) | Comments |
| Predicted state | ||
| Predicted state | ||
| Predicted state | ||
| Predicted state |
Table I. Best-fit results for . PDG2026 input: and came from Ref. [3]. The ground-state mass of 3988 MeV could indicate that this is the or tetraquark with constituent mass 3922 or 3926 MeV.
UME for
The properties of the are incompatible with a structure (exotic state) [3]. UME results are shown in Figure 2 and Table II. . Charged low-lying is seen as a peak in the invariant mass distribution of the system by the BES III Collaboration [11] in with a CM energy of 4.26 GeV, and by radiative return from collisions at from 9.46 to 10.86 GeV at Belle [12]. Partial wave analysis of [13] determines with more than significance.

Figure 2. UME for . The first three blue-filled circle data points are from [3]. The four magenta-filled diamond points are projected excited states. The UME equation Eq. (1) is MeV. The red solid curve shows the best fit and its extrapolations for the four heavy-lying states.
| PDG2026 (GeV) | Best-fit (GeV) | Comments |
| , | ||
| , | ||
| , | ||
| Predicted state | ||
| Predicted state | ||
| Predicted state | ||
| Predicted state |
Table 2. Best-fit results for . PDG2026 input: , , and came from Ref. [3]. The ground-state mass of 3887 MeV could indicate that this is one of the three tetraquarks with constituent masses 3772 3780 MeV.
UME for Tetraquarks (Example: )
It is not surprising that UME works well for tetraquarks, as they are essentially double mesons. An example tetraquark, , is shown in Figure 3 and Table III. . CMS Collaboration determined those to [14]. Obviously, these states are incompatible with a structure [3].

Figure 3. UME for tetraquark. The first two and fourth blue-filled circle data points are from [3]. The green-filled triangle point is a missing state, and the four magenta-filled diamond points are projected excited states. The UME equation Eq. (1) is . The red solid curve shows the best fit and its extrapolations for the four heavy-lying states.
There are several methods to calculate tetraquark masses (Table IV). Some of them are in reasonable agreement with our picture.
| Method | Basic Principle |
| Lattice QCD | Calculate quark and gluon interactions on a spacetime lattice [15] |
| Constituent-quark models | Effective quark masses and interactions [16] |
| Diquark–anti-diquark models | Tetraquarks as two interacting clusters [17] |
| Hadronic molecular models | Tetraquarks as bound or resonant pairs of mesons [18] |
| QCD sum rules | Relate QCD correlation functions to hadron masses [19] |
| Bethe–Salpeter equations | Relativistic bound-state equations [20] |
| Potential and Schrödinger models | Effective four-body or two-cluster equations [21] |
| Born–Oppenheimer methods | Separate heavy-quark and light-field dynamics [22] |
Table IV. Different ways to calculate tetraquark masses.
UME for
The properties of the are incompatible with a structure (exotic state) [3]. UME results are shown in Figure 4 and Table V. . Observed by the Belle Collaboration [23] in decays to , where and . is favored based on angular analysis.

Figure 4. UME for . The first two blue-filled circle data points are from [3]. The four magenta-filled diamond points are projected excited states. The UME equation Eq. (1) is . The red solid curve shows the best fit and its extrapolations for the four heavy-lying states.
| PDG2026 (GeV) | Best-fit (GeV) | Comments |
| , | ||
| , | ||
| Predicted state | ||
| Predicted state | ||
| Predicted state | ||
| Predicted state |
Table V. Best-fit results for . PDG2026 input: and came from [3]. The ground-state mass of 10607 MeV could indicate that this is the tetraquark with constituent mass 10432 MeV.
| PDG2026 (GeV) | Best-fit (GeV) | Comments |
| 6646.0 | 6649.4 | |
| 6898.0 | 6896.6 | |
| 7041.2 | Missed state | |
| 7134.0 | 7143.7 | |
| 7223.3 | Predicted state | |
| 7288.3 | Predicted state | |
| 7343.3 | Predicted state | |
| 7390.9 | Predicted state |
Table 3. Best-fit results for . PDG2026 input: , , and came from Ref. [3].
UME for Glueballs
Glueballs are difficult to identify experimentally because they have masses similar to those of the constituent-quark states. As discussed below, perhaps some glueball states have been misidentified as quark states. The lowest mass glueballs are digluons () and trigluons () (Table VI). There are several calculation methods to determine glueball masses (Table VII).
| Property | ||
| Gluon color states available | 8 | 8 |
| Independent color singlets | 1 | 2 |
| Charge conjugation | ||
| Yes | Yes | |
| Radial excited states | Yes | Yes |
Table VI. Features of and glueballs.
| Method | Basic principle |
| Lattice QCD | QCD on a spacetime lattice [24] |
| QCD sum rules | Relate gluonic correlation functions to hadron properties [19] |
| Constituent-gluon models | Glueballs as bound states of effective massive gluons [25] |
| Potential models | Bound-state equations using effective gluon interactions [26] |
| Bethe–Salpeter equations | Relativistic bound-state equations for interacting gluons [27] |
| Flux-tube/string models | Gluonic fields as closed loops or strings [28] |
| Holographic QCD | Higher-dimensional gravitational dual Broad patterns of glueball spectra [29] |
| Functional QCD methods | Truncated Dyson-Schwinger and related equations [30] |
Table VII. There are several different ways to calculate glueball masses.
For our study, we selected two series of glueballs predicted by LQCD [31]: four scalar s and two tensor s. Mixing effects are already essential in the pure gauge case and lead to a large intercept of a pomeron-like trajectory. UME results for scalar are shown in Figure 5 and Table VIII and for tensor are shown in Figure 6 and Table IX. The potential candidates for scalar glueballs are and , while the potential candidates for tensor glueballs are , , and .

Figure 5. UME for scalar glueballs. The first four blue-filled circle data points are from LQCD calculations [31]. Four magenta-filled diamond projected masses are shown. The UME equation Eq. (1) is . The red solid curve shows the best fit and its extrapolations for the four heavy-lying cases.
| LQCD (GeV) | Best-fit (GeV) | Comments |
| Predicted state | ||
| Predicted state | ||
| Predicted state | ||
| Predicted state |
Table VIII. Best-fit results for scalar . LQCD input came from Ref. [31].

Figure 6. UME for tensor glueballs. The first four blue-filled circle data points are from LQCD calculations [31]. Four magenta-filled diamond projected masses are shown. The UME equation Eq. (1)is MeV. The red solid curve shows the best fit and its extrapolations for the four heavy-lying cases.
| LQCD (GeV) | Best-fit (GeV) | Comments |
| Predicted state | ||
| Predicted state | ||
| Predicted state | ||
| Predicted state |
Table IX. Best-fit results for tensor . LQCD input came from Ref. [31].
Meyer, in his 2005 Dr. Phil. Thesis at the University of Oxford [31], used lattice QCD to calculate several series of glueballs. This UME fit for an equal-quantum set of four glueballs
( sample) shows that the UME works for glueballs.
This UME is fit for an equal-quantum set of four scalar glueballs ($0^{++}$ and two tensor glueballs (), showing that the UME works for glueballs. Note that the glueball UME $\alpha parameter (the logarithmic slope in Eq. (1)) is about 3.5 times larger than for tetraquarks.
Possible Misidentification of Glueball or Tetraquark States
RS states the following: “Several states reported by PDG2026 are out of the sequence , , , , and ” and “ has two states reported in the PDG2026 with masses MeV and MeV, which do not fit Eq. (1).” “Several states reported by PDG2026 are out of the UME sequence , , and .”
This section matches, within uncertainties, the known glueballs discussed above; three such matches exist. Then, tetraquarks are matched with reasonably negative constituent-quark binding energies; four such matches exist. See Table X
| Misnomer ? | |||||
| Mass (MeV) | |||||
| TQ | |||||
| (MeV) | 1344 | 1352 | 1360 | 1644 | |
| (MeV) | -64 | -88 | -211 | -141 | |
| Misnomer ? | |||||
| Mass (MeV) | |||||
| GB | HM GB | HM GB | AT | ||
| (MeV) |
Table X. Tetraquark and glueball near matches to possibly misidentified mesons. “Misnomer” is a “misapplied or inappropriate name,” TQ is tetraquark, is constituent quark mass, GB is glueball ( and ), is glueball mass, HM is Ref. [31], and AT is Ref. [32].
Conclusion
Following our previous RS papers, we considered the case of exotic mesons, heavy non- mesons. Obviously, our simple logarithmic Universal Mass Equation works and can predict heavy-lying states. We hope that experimentalists will have a chance to use this guide to look for new states that the PDG missed.
TABLE X. Tetraquark and glueball near matches to possibly misidentified mesons. “Misnomer” is a “misapplied or inappropriate name,” TQ is tetraquark, is constituent quark mass, GB is glueball ( and ), is glueball mass, HM is Ref. [31], and AT is Ref. [32].
Acknowledgments
This work was supported in part by the U.S. Department of Energy, Office of Science, Office of Nuclear Physics, under Award Number DE–SC0016583.
References
- [1]M. Gell-Mann, “A schematic model of baryons and mesons,” Phys. Lett. 8, 214 (1964).
- [2]G. Zweig, “An SU(3) model for strong interaction symmetry and its breaking,” Version 2, Preprint CERN-TH-412, 1964.
- [3]F. Takahashi et al. [Particle Data Group], “Review of Particle Physics,” Int. J. Mod. Phys. A 41, 2630011 (2026).
- [4]L. D. Roper and I. Strakovsky, “Universal mass equation for equal-quantum excited-states sets I,” Eur. Phys. J. A 61, 102 (2025).arxiv.org/abs/2410.11196
- [5]L. D. Roper and I. Strakovsky, “Universal mass equation for equal-quantum excited-states sets II,” Eur. Phys. J. A 61, 225 (2025).arxiv.org/abs/2506.06496
- [6]S. Navas et al. [Particle Data Group], “Review of Particle Physics,” Phys. Rev. D 110, 030001 (2024).
- [7]C. Amsler et al., “S. Naming Scheme for Hadrons,” in Ref. [6].DOI
- [8]R. Koniuk and N. Isgur, “Where have all the resonances gone? An analysis of baryon couplings in a quark model with chromodynamics,” Phys. Rev. Lett. 44, 845 (1980),DOI
- [9]T. Gutsche, C. Hanhart, and R. E. Mitchell “78. Heavy non-qq̄ mesons,” in Ref. [3].
- [10]R. Aaij et al. [LHCb Collaboration], “Observation of new resonances decaying to J/ψK+ and J/ψϕ,” Phys. Rev. Lett. 127, 082001 (2021).DOI
- [11]M. Ablikim et al. [BES III Collaboration], “Observation of a charged charmoniumlike Structure in e+e− → π+π−J/ψ at √s = 4.26 GeV,” Phys. Rev. Lett. 110, 252001 (2013).pubmed.ncbi.nlm.nih.gov/23829729
- [12]Z. Q. Liu et al. [Belle Collaboration], “Study of e+e− → π+π−J/ψ and observation of a charged charmoniumlike state at Belle,” Phys. Rev. Lett. 110, 252002 (2013) [erratum: Phys. Rev. Lett. 111, 019901 (2013)].
- [13]M. Ablikim et al. [BES III Collaboration], “Determination of the spin and parity of the Zc(3900),” Phys. Rev. Lett. 119, 072001 (2017).DOI
- [14]A. Hayrapetyan et al. [CMS Collaboration], “Determination of the spin and parity of all-charm tetraquarks,” Nature 648, 58 (2025).
- [15]M. Lüscher, “Volume dependence of the energy spectrum in massive quantum field theories. 1. Stable particle states,” Commun. Math. Phys. 104, 177 (1986).
- [16]R. L. Jaffe, “Multi-quark hadrons. 1. The phenomenology of (2 quark 2 anti-quark) mesons,” Phys. Rev. D 15, 267 (1977); R. L. Jaffe, “Multi-quark hadrons. 2. Methods,” Phys. Rev. D 15, 281 (1977).
- [17]L. Maiani, F. Piccinini, A. D. Polosa, and V. Riquer, “Diquark-antidiquarks with hidden or open charm and the nature of X(3872),” Phys. Rev. D 71, 014028 (2005).DOI
- [18]N. A. Tornqvist, “From the deuteron to deusons, an analysis of deuteron-like meson-meson bound states,” Z. Phys. C 61, 525 (1994).DOI
- [19]M. A. Shifman, A. I. Vainshtein, and V. I. Zakharov, “QCD and resonance physics. Theoretical foundations,” Nucl. Phys. B 147, 385 (1979).
- [20]G. Eichmann, C. S. Fischer, and W. Heupel, “The light scalar mesons as tetraquarks,” Phys. Lett. B 753, 282 (2016).DOI
- [21]J. Vijande, A. Valcarce, and K. Tsushima, “Dynamical study of QQ − ūd mesons,” Phys. Rev. D 74, 054018 (2006).DOI
- [22]E. Braaten, C. Langmack, and D. H. Smith, “Born-Oppenheimer approximation for the XYZ mesons,” Phys. Rev. D 90, 014044 (2014).DOI
- [23]A. Bondar et al. [Belle Collaboration], “Observation of two charged bottomonium-like resonances in Υ(5S) decays,” Phys. Rev. Lett. 108, 122001 (2012).
- [24]C. Michael, “Glueballs and hybrid mesons,” Frascati Phys. Ser. 5 (1996), 489 (1996).
- [25]J. M. Cornwall, “Dynamical mass generation in continuum QCD,” Phys. Rev. D 26, 1453 (1982),DOI
- [26]J. M. Cornwall and A. Soni, “Glueballs as bound states of massive gluons,” Phys. Lett. B 120, 431 (1983).DOI
- [27]W. Heupel, G. Eichmann, and C. S. Fischer, “Tetraquark bound states in a Bethe-Salpeter approach,” Phys. Lett. B 718, 545 (2012).DOI
- [28]N. Isgur and J. E. Paton, “A flux tube model for hadrons in QCD,” Phys. Rev. D 31, 2910 (1985).pubmed.ncbi.nlm.nih.gov/9955610
- [29]E. Witten, “Anti-de Sitter space, thermal phase transition, and confinement in gauge theories,” Adv. Theor. Math. Phys. 2, 505 (1998),
- [30]C. S. Fischer and J. M. Pawlowski, “Uniqueness of infrared asymptotics in Landau gauge Yang-Mills theory,” Phys. Rev. D 75, 025012 (2007); C. S. Fischer and J. M. Pawlowski, “Uniqueness of infrared asymptotics in Landau gauge Yang-Mills theory II,” Phys. Rev. D 80, 025023 (2009).DOI
- [31]H. B. Meyer, “Glueball Regge trajectories,” Ph.D Thesis, the University of Oxford (2005), [arXiv:hep-lat/0508002 [hep-lat]].arxiv.org/abs/hep-lat/0508002
- [32]A. Athenodorou and M. Teper, “The glueball spectrum of SU(3) gauge theory in 3 + 1 dimensions,” JHEP 11, 172 (2020).DOI